AMD

XC7Z030-1FBG676I - 125K Zynq SoC, 667MHz, 676-FCBGA | AMD

부품 번호: XC7Z030-1FBG676I ✓ 활성
1.2 V and 3.3 V Vdss 676-FCBGA (27 x 27 mm) Package 667 MHz Speed
MOQ: 1 |

XC7Z030-1FBG676I 개요

The AMD XC7Z030-1FBG676I is a Zynq-7000 Kintex-7 system-on-chip with 125K logic cells, a dual-core ARM Cortex-A9 processor operating at 667 MHz, and CoreSight debug support in a 676-pin FCBGA package measuring 27 x 27 mm. It combines programmable FPGA logic with an integrated application processor and CoreSight debugging in one device.

A Zynq system-on-chip is a heterogeneous processing platform that combines an ARM-based microprocessor subsystem with programmable FPGA logic in the same package. The XC7Z030 belongs to the FPGA and CPLD category while integrating an ARM Cortex-A9 MPCore processor, dedicated memory controllers, programmable logic, and debug resources. This combination supports hardware-assisted control, real-time processing, and flexible peripheral or algorithm implementation without requiring separate discrete devices.

Key device characteristics include 125K FPGA logic cells, 667 MHz processor performance, dual ARM Cortex-A9 cores, and CoreSight debug capability. The -1 speed designation identifies the lower-speed grade in the XC7Z030 family, while the industrial I suffix identifies its intended operating-temperature class. The 676-FCBGA package supports high-density interconnect requirements but demands careful PCB layout, substrate design, and thermal planning because of its large ball count and substantial I/O bandwidth.

The device combines hard processor logic with a Kintex-7 FPGA fabric. The processor subsystem executes operating-system or bare-metal software, while the programmable fabric can implement parallel data paths, custom interfaces, accelerators, or protocol logic. This division of work allows software to control system behavior while FPGA logic handles timing-critical operations. Migration between the -1 and -2 speed grades can simplify product planning because the listed device identifiers use the same FBG676 package family, although the processor frequency changes from 667 MHz to 800 MHz.

Typical applications include industrial vision, high-speed data acquisition, network appliances, programmable logic controllers, test and measurement equipment, embedded control systems, and communications infrastructure. The dual-core ARM subsystem supports concurrent control-plane and data-plane software, while the FPGA fabric accelerates parallel processing and reduces external component count. These applications benefit from programmable hardware, deterministic I/O behavior, and integrated debug visibility.

PCB implementation is the dominant hardware consideration. A 676-FCBGA device requires a matched ball pattern, controlled impedance routing, adequate power and ground planes, decoupling close to supply pins, and assembly processes capable of handling the package pitch and thermal requirements. Engineers should use the AMD package placement diagram and the official Zynq-7000 pinout files when assigning board layers and verifying escape routing before schematic capture is released for fabrication.

This product overview combines the device identity, package constraints, speed-grade differences, and practical implementation considerations with verified family alternatives. It also identifies which electrical, thermal, and pin-level attributes require confirmation from AMD documentation before layout release, helping engineers distinguish confirmed product facts from parameters that still need direct design review.

드롭인 대체품: XC7Z030-1FBG676I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: XC7Z030-1FBG676I (동일 폼 팩터 및 풋프린트) — 차이점: Package, Programmable Logic, Operating Temperature, Processor Architecture, Mounting Type.

Altera
Package: 896-pin FBGA (31 x 31 mm)
Operating Temperature: 0C to +85C
비교 대상: XC7Z030-1FBG676I →
AMD
Package: 676-ball FCBGA, 27 mm x 27 mm
Programmable Logic: 125K Kintex-7 logic cells
Operating Temperature: 0°C to 85°C
비교 대상: XC7Z030-1FBG676I →
AMD
Programmable Logic: Kintex-7 FPGA fabric with 125,000 logic cells
비교 대상: XC7Z030-1FBG676I →
AMD
Package: 676-pin FCBGA
Programmable Logic: 125K logic cells
Processor Architecture: 32-bit Arm Thumb-2
비교 대상: XC7Z030-1FBG676I →
AMD
Package: 676-FCBGA (27 x 27 mm)
Programmable Logic: 125K Kintex-7 FPGA logic cells
Processor Architecture: Arm Cortex-A9 MPCore
비교 대상: XC7Z030-1FBG676I →
AMD
Package: 676-FCBGA
Mounting Type: Surface-mount BGA
비교 대상: XC7Z030-1FBG676I →
AMD
Package: 676-FCBGA (27x27 mm)
Operating Temperature: -40C to +100C
비교 대상: XC7Z030-1FBG676I →
AMD
Operating Temperature: -40°C to +100°C (TJ)
비교 대상: XC7Z030-1FBG676I →

XC7Z030-2FBG676I

✅ 드롭인
AMD
📦 676-FCBGA (27 x 27 mm)
Zynq-7000 Kintex-7 FPGA SoC · Dual Arm Cortex-A9 MPCore · 800 MHz · 125K logic cells · 400 DSP slices · 265 block RAMs · 4 GTX links · CoreSight

가격 문의

데이터시트 보기 →

XC7Z030-1FBG676C

✅ 드롭인
AMD
📦 676-FCBGA (27 x 27 mm)
Zynq-7000 FPGA SoC with ARM Cortex-A9 processor · Dual-core ARM Cortex-A9 MPCore · ARMv7-A · 667 MHz · 2.5 DMIPS/MHz per CPU · 125K Kintex-7 logic cells · 130 I/Os · Coherent multiprocessor support

가격 문의

데이터시트 보기 →

XC7Z030-1FFG676C

✅ 드롭인
AMD
📦 676-FCBGA (27 x 27 mm)
Zynq-7000 programmable system-on-chip · Kintex-7 FPGA · Dual-core Arm Cortex-A9 MPCore · 667 MHz · 125,000 cells · CoreSight · 676-pin FCBGA · 27 mm x 27 mm

가격 문의

데이터시트 보기 →

XC7Z030-2FFG676I

✅ 드롭인
AMD
📦 676-FCBGA (27 x 27 mm)
Zynq-7000 system-on-chip with dual-core Arm Cortex-A9 and Kintex-7 FPGA · Dual-core Arm Cortex-A9 MPCore · 800 MHz · 125K logic cells · Kintex-7 · Zynq-7000 · FPGA · CoreSight

가격 문의

데이터시트 보기 →

XC7Z030-1FBV676I

✅ 드롭인
📦 676-FCBGA (27 x 27 mm)
The FBV676 ordering code differs from FBG676 and requires AMD package-pin confirmation; the listed 676-ball package format and industrial suffix are retained.

📋 참조 대체품 (카탈로그에 없음)

XC7Z030-1FBG676I 최대 정격 & 전기적 특성

Device Type Zynq-7000 Kintex-7 system-on-chip
FPGA Logic Cells 125K logic cells
Processor Cores 2 ARM Cortex-A9 cores
Processor Architecture 32-bit ARM Cortex-A9 MPCore
Maximum Processor Frequency 667 MHz
Processor Instruction Set Thumb-2
Programmable Logic Kintex-7 FPGA fabric
Debug Support CoreSight
Package Type 676-FCBGA (27 x 27 mm)
Package Pin Count 676 balls
실장 유형 Surface mount
Speed Grade -1
Temperature Grade Industrial, I suffix
I/O Supply Values 1.2 V and 3.3 V

XC7Z030-1FBG676I 676 balls 핀 구성 가이드

XC7Z030-1FBG676I(676 balls 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

XC7Z030-1FBG676I의 676 balls 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: XC7Z030-1FBG676I.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

XC7Z030-1FBG676I 적합 용도: 6 애플리케이션s: Industrial Machine Vision, High-Speed Data Acquisition, Programmable Logic Controller, Communications Network Appliance, Test and Measurement Equipment, Embedded Control System.

🏭

Industrial Machine Vision

The XC7Z030-1FBG676I suits machine-vision controllers that must combine image or sensor processing with deterministic control. Its dual ARM Cortex-A9 cores at 667 MHz can run camera control, communication, and system management software, while the 125K-cell Kintex-7 fabric can accelerate pixel pipelines, implement trigger logic, or handle parallel sensor interfaces. The 676-FCBGA package provides the pin density needed for external memory and high-speed I/O, although the design requires a substrate and PCB capable of supporting the ball pitch. For production use, engineers should verify the available DDR memory interfaces, supported I/O standards, power rails, and thermal performance against the AMD XC7Z030-XC7Z045 data sheet ds191 before finalizing the camera pipeline.

📊

High-Speed Data Acquisition

The XC7Z030-1FBG676I is appropriate for acquisition systems that divide work between real-time FPGA logic and higher-level control software. The 125K Kintex-7 cells can implement parallel ADCs, counters, digital filters, packetizers, or buffer-management functions, while the dual Cortex-A9 subsystem handles configuration, calibration, storage, and network communication. Its 667 MHz processor clock provides dedicated control capacity without assigning every sequential task to the programmable fabric. The principal engineering constraint is power and signal integrity: the 676-FCBGA device needs dense decoupling, controlled-impedance routing, careful memory topology, and a thermal solution validated at maximum acquisition activity rather than idle conditions.

🔧

Programmable Logic Controller

The XC7Z030-1FBG676I provides a modern alternative to a discrete PLC controller when deterministic I/O and programmable hardware are required. The Kintex-7 fabric can implement timing-critical input capture, encoder processing, motion sequencing, or custom fieldbus functions, while the two ARM Cortex-A9 cores run application logic, diagnostics, and communications. Its 125K logic cells provide substantial parallel processing capacity, and the -1 grade runs the processor at 667 MHz for control workloads that do not require the XC7Z030-2FBG676I's 800 MHz rating. Deployment in machinery should include thermal and EMC validation, deterministic boot behavior, safe-state I/O design, and recovery planning for software and programmable-bitstream updates.

🌐

Communications Network Appliance

XC7Z030-1FBG676I can serve as the processing heart of a network appliance that needs adaptable packet handling alongside a conventional control plane. The ARM Cortex-A9 subsystem can run network services, management interfaces, or protocol stacks, while the FPGA fabric can implement parallel classifiers, compression, encryption acceleration, or custom interface logic. Its 125K logic cells and 676-ball package provide a useful combination of density and I/O capability for products that evolve across hardware revisions. The design must carefully partition time-critical traffic into the fabric, preserve deterministic latency, and provide independent recovery paths for the processor and programmable configuration. Thermal testing should include sustained packet throughput because activity-dependent power can exceed assumptions based on processor utilization alone.

🔬

Test and Measurement Equipment

The XC7Z030-1FBG676I is useful in instrumentation that combines flexible signal acquisition with a sophisticated user interface. Programmable logic can execute waveform capture, digital pattern generation, timing analysis, or protocol conversion, while the dual Cortex-A9 cores handle instrument control, calibration, data analysis, and graphical or networked interfaces. The 667 MHz processor clock supports operating-system-based control, and the 125K-cell fabric allows measurement algorithms to evolve without changing the board. A practical implementation should isolate analog and sensitive clock paths from the SoC, use the AMD placement and pinout documentation to assign power and ground balls correctly, and model FPGA, DDR, and processor power together when defining the cooling system for long-duration measurements.

⚙️

Embedded Control System

The XC7Z030-1FBG676I supports embedded control systems where an application processor must coexist with hardware-specific logic. The ARM cores can run a real-time operating system, device management, networking, and diagnostics, while the programmable fabric handles proprietary interfaces, motion sequencing, or safety-related monitoring. Its 125K logic cells allow substantial custom hardware to be consolidated into the SoC, and the 676-FCBGA offers extensive connectivity for external memory and I/O. Engineers should treat software isolation, watchdog behavior, configuration security, and controlled upgrade procedures as first-class design requirements. Board validation must include startup sequencing, brownout behavior, thermal cycling, and fault recovery because an integrated programmable device concentrates multiple functions into one high-density package.

What is the AMD XC7Z030-1FBG676I?
The AMD XC7Z030-1FBG676I is a Zynq-7000 Kintex-7 system-on-chip with 125K FPGA logic cells, two ARM Cortex-A9 processor cores operating at 667 MHz, CoreSight debug support, and a 676-FCBGA package measuring 27 x 27 mm. According to the AMD XC7Z030-XC7Z045 data sheet ds191, the device integrates programmable FPGA logic with a hard ARM processor subsystem and dedicated memory and I/O resources. It is intended for designs that need both sequential software control and parallel programmable logic.
What are the key specifications of XC7Z030-1FBG676I that engineers should know?
The XC7Z030-1FBG676I combines 125K Kintex-7 logic cells with a dual-core ARM Cortex-A9 MPCore processor rated at 667 MHz in a 676-FCBGA package. According to AMD data sheet ds191, the device also provides CoreSight debugging, a 32-bit Thumb-2 processor architecture, and 1.2 V and 3.3 V I/O supply values. The -1 suffix denotes its speed grade, while the I suffix denotes the industrial temperature class. Package construction, power delivery, and thermal design remain the primary board-level constraints.
Is XC7Z030-1FBG676I suitable for industrial applications?
Yes, the XC7Z030-1FBG676I is identified as an industrial-temperature-grade device and is suitable for industrial control, machine vision, data acquisition, and communications equipment. Its dual Cortex-A9 cores can run control software while the 125K-cell Kintex-7 fabric implements parallel or timing-sensitive logic. The AMD XC7Z030-XC7Z045 data sheet ds191 remains the controlling document for exact environmental limits, power limits, and qualification conditions; the commercial I suffix alone should not be treated as a substitute for reviewing those operating requirements.
What is the difference between XC7Z030-1FBG676I and XC7Z030-2FBG676I?
The XC7Z030-1FBG676I operates its dual ARM Cortex-A9 processor at 667 MHz, while the XC7Z030-2FBG676I operates at 800 MHz. Both are identified as Zynq-7000 devices with 125K logic cells and the same 676-FCBGA package format. The listed speed-grade change makes XC7Z030-2FBG676I approximately 20% higher in processor frequency. Existing boards may accommodate the change, but the AMD package placement diagram and pinout files should be checked before treating it as an unqualified replacement.
When should I choose XC7Z030-1FBG676I over XC7Z030-2FBG676I?
Choose XC7Z030-1FBG676I when the design does not require the higher 800 MHz processor rating of XC7Z030-2FBG676I and the -1 speed grade is an adequate system target. The XC7Z030-1FBG676I retains the same 125K logic-cell count and 676-FCBGA package format, while limiting processor frequency to 667 MHz. This is useful when available performance is sufficient and the design has already been qualified around the -1 speed grade. Review power, timing, and thermal margins before changing speed grades.
Is XC7Z030-1FBG676I the same as XC7Z030-1FBG676C?
No. XC7Z030-1FBG676I and XC7Z030-1FBG676C share the -1 speed grade and 676-FCBGA format, but their final suffix letters indicate different temperature classes: I is industrial and C is commercial. That distinction affects the permitted operating-temperature range rather than the listed logic-cell count or processor frequency. Use the I version when industrial temperature operation is required and the C version only when its commercial environmental rating meets the product specification.
What is the best drop-in replacement for XC7Z030-1FBG676I?
The closest listed same-package alternatives are XC7Z030-2FBG676I, XC7Z030-1FBG676C, XC7Z030-1FFG676C, XC7Z030-2FFG676I, and XC7Z030-1FBV676I, but each changes a grade, package identifier, or device designation that must be validated. AMD documents separate FBG676 and FFG676 package placements, so a footprint match alone does not prove pin compatibility. For an unqualified field replacement, use the exact ordering code or obtain written confirmation from AMD that the specific alternate has the same power, ground, and signal-ball assignments.
Can XC7Z030-2FBG676I replace XC7Z030-1FBG676I on an existing PCB?
XC7Z030-2FBG676I can be considered for an existing XC7Z030-1FBG676I design because both are listed with the same 125K logic cells and 676-FCBGA package format, while processor frequency increases from 667 MHz to 800 MHz. However, the faster grade can change power dissipation, timing margins, and thermal requirements. Compare the AMD placement diagrams, confirm electrical pin assignments, and repeat worst-case power and timing analysis before approving the substitution for production.
Where can I download the XC7Z030-1FBG676I datasheet PDF?
The official XC7Z030-1FBG676I data sheet is available through AMD document ds191, which covers the XC7Z030, XC7Z035, XC7Z045, and XC7Z100 Zynq-7000 SoC families. Use the AMD documentation link for the authoritative electrical characteristics, package information, and device tables. The official Zynq-7000 package pinout page also provides package device files for design verification, while the AMD package placement diagram documents the XC7Z30-FBG676 and FFG676 placement.
Where can I find the XC7Z030-1FBG676I pinout and package placement?
The XC7Z030-1FBG676I pinout should be taken from AMD's Zynq-7000 package device pinout files rather than inferred from a generic BGA drawing. AMD identifies UG865 as the format reference for those files, and the XC7Z30-FBG676/FFG676 package placement diagram provides the mechanical ball-placement view. Use both resources together during schematic and PCB layout review because the 676-ball FCBGA contains power, ground, configuration, processor, and programmable-logic balls with exact assigned functions.
How much power does the XC7Z030-1FBG676I dissipate?
The exact power dissipation depends on the selected speed grade, processor utilization, programmable-logic activity, I/O loading, voltage, and ambient temperature, so it cannot be represented by one universal value. Consult the AMD XC7Z030-XC7Z045 data sheet ds191 for the device power tables and operating conditions. During design, estimate both static and dynamic consumption at the worst-case workload and verify the result against package thermal limits and the board's cooling strategy.
What cooling and PCB design considerations apply to XC7Z030-1FBG676I?
The XC7Z030-1FBG676I requires an FCBGA assembly and board design capable of supporting its 676-ball package, dense power distribution, high-speed memory interfaces, and processor-generated heat. Use the AMD package placement diagram to verify ball locations, distribute power and ground planes carefully, place decoupling close to the relevant supply balls, and apply the manufacturer's recommended via and assembly rules. Thermal analysis should cover maximum processor and FPGA activity rather than an idle workload.
Is there a cross-brand equivalent for XC7Z030-1FBG676I?
No direct cross-brand drop-in equivalent was identified for XC7Z030-1FBG676I. The device combines an AMD Zynq-7000 FPGA architecture, ARM Cortex-A9 processing subsystem, AMD CoreSight resources, and a proprietary 676-FCBGA interface in one qualification package. A competitor device with a superficially similar CPU or logic-cell count would require different drivers, toolchains, memory interfaces, and pin assignments, so it should be treated as a redesign rather than a drop-in substitution.
Where can I buy XC7Z030-1FBG676I and what is its current lead time?
Use the Request a Quote form on this page to request current XC7Z030-1FBG676I availability, quantity breaks, and production lead time for the exact 676-FCBGA ordering code. Current commercial terms can vary with the requested quantity, allocation status, and packaging arrangement. Include your target quantity, date code requirements, and whether you need traceability or a scheduled delivery schedule so the sourcing request can be reviewed accurately.
What is the price of XC7Z030-1FBG676I?
The current XC7Z030-1FBG676I commercial price is best obtained through the Request a Quote form on this page. High-performance Zynq SoC pricing can depend on quantity, allocation, lead time, and exact package ordering code, so a single static price may not reflect a usable production offer. Submit the exact MPN and required quantity to receive the current quote without substituting a different grade, package, or temperature suffix.
Is XC7Z030-1FBG676I in stock?
Current XC7Z030-1FBG676I stock should be confirmed through the Request a Quote form on this page. Because this is a large 676-FCBGA device with speed- and temperature-grade suffixes, inventory status should be tied to the exact ordering code rather than to the broader XC7Z030 family. Include your required quantity and production schedule in the request so the response can distinguish immediately available material from material requiring allocation or longer procurement.
Can software from the XC7Z030-1FBG676I run on a faster XC7Z030 speed grade?
Yes, software written for the XC7Z030-1FBG676I generally remains portable to the faster XC7Z030-2FBG676I because both devices belong to the same Zynq-7000 family and retain the listed 125K logic-cell configuration. The operating system, application binaries, and bitstream must still be rebuilt or validated for the selected device identifier. The higher 800 MHz operating point should also be checked against original timing, power, and thermal assumptions rather than being assumed equivalent in every implementation.

엔지니어링 참조 데이터: XC7Z030-1FBG676I — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose XC7Z030-1FBG676I when the design requires the Zynq-7000 combination of dual-core ARM Cortex-A9 processing, 125K Kintex-7 logic cells, CoreSight debugging, and an industrial-grade 676-FCBGA ordering code, but does not need the XC7Z030-2FBG676I's 800 MHz processor rating. The -1 grade can provide useful performance margin over minimum requirements while preserving the same listed package family and logic-cell count as the -2 device.

Review XC7Z030-1FBG676C when environmental requirements permit the commercial temperature class; it retains the 667 MHz speed grade but changes the temperature suffix. Consider XC7Z030-1FFG676C or XC7Z030-2FFG676I only after comparing the exact FFG package placement against FBG676. XC7Z030-1FBV676I requires confirmation of its package-specific electrical assignments and device details.

No direct cross-brand substitute preserves the AMD Zynq toolchain, processor subsystem, FPGA fabric, and 676-ball interface simultaneously. Treat competitor devices as redesign candidates rather than drop-in replacements.

대체품과의 비교

파라미터 이 제품 XC7Z030-2FBG676I XC7Z030-1FBG676C XC7Z030-1FFG676C XC7Z030-2FFG676I XC7Z030-1FBV676I
Brand AMD AMD AMD AMD AMD AMD
Package 676-FCBGA (27 x 27 mm) 676-FCBGA (27 x 27 mm) 676-FCBGA (27 x 27 mm) 676-FCBGA; package placement must be confirmed 676-FCBGA; package placement must be confirmed 676-FCBGA; package placement must be confirmed
Temperature Grade Industrial, I suffix Industrial, I suffix Commercial, C suffix Commercial, C suffix Industrial, I suffix Industrial, I suffix
Speed Grade -1 -2 -1 -1 -2 -1

주요 차별점

  • Lower speed grade than the -2 alternative (vs XC7Z030-2FBG676I)
  • Industrial temperature suffix for extended-environment designs (vs XC7Z030-1FBG676C)
  • Original FBG676 package identifier (vs XC7Z030-1FFG676C)
  • Dual-core processing with programmable logic in one package (vs XC7Z030-1FBV676I)

설계 노트

Start the board design from the AMD XC7Z30-FBG676/FFG676 package placement diagram rather than a generic 676-ball BGA outline. Assign every power, ground, configuration, memory, and processor signal directly from the official package files, then cross-check the schematic against the Zynq-7000 package pinout resources. This is critical for FFG and FBG ordering codes because the shared 676-ball format does not by itself guarantee identical ball assignments.

Build the power tree for processor, FPGA, memory, and I/O domains separately, then validate startup sequencing and steady-state current using the device's worst-case activity tables. Place decoupling capacitance close to the relevant supply balls and confirm the selected PCB stack-up supports the required layer transitions and current density. If XC7Z030-2FBG676I is substituted for the -1 grade, repeat power and thermal analysis because the 800 MHz processor rating can increase dynamic consumption.

Estimate junction temperature from total SoC, memory, and regulator dissipation rather than FPGA logic-cell utilization alone. Processor activity, DDR traffic, I/O loading, and speed grade can materially change the heat generated by XC7Z030-1FBG676I. Use the AMD power and thermal limits from the XC7Z030-XC7Z045 data sheet, then validate the assembled board with forced-air and enclosure conditions representative of the final product.

Treat DDR memory and other high-speed interfaces as constrained distributed systems. Follow the AMD routing and topology guidance, maintain continuous reference planes where required, control impedance on the chosen stack-up, and avoid splitting return paths beneath active signal layers. Validate the final design with the appropriate signal-integrity simulation and measurement tools because small package, layer-transition, and via differences can materially affect eye margins.

Do not treat a shared 676-FCBGA outline as proof that every FBG676 or FFG676 ordering code is a qualified drop-in replacement. Compare AMD placement diagrams, pinout files, power requirements, speed limits, and temperature ranges for the exact alternate. In particular, the C and I suffixes change environmental suitability, while the -1 and -2 suffixes change processor performance and potentially power and timing margins.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The exact ordering code is industrial-temperature identified, but no RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified in the cited product information. Confirm compliance with AMD for the current production configuration.

데이터 검증일: 2026-11-14 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

xc7z030 1fbg676i xc7z030 2ffg676i xc7z030 1ffg676i xc7z030 2fbg676i xc7z030 1fbg676i datasheet pdf xc7z030 1fbg676i pinout xc7z030 1fbg676i package placement xc7z030 1fbg676i footprint xc7z030 1fbg676i equivalent xc7z030 1fbg676i replacement xc7z030 1fbg676i cross reference amd xc7z030 1fbg676i xc7z030 1fbg676i price xc7z030 1fbg676i stock xc7z030 1fbg676i vs xc7z030 2fbg676i

관련 부품 & 용어

AMD XC7Z030-1FBG676I XC7Z030-2FBG676I XC7Z030-1FBG676C XC7Z030-1FFG676C XC7Z030-2FFG676I XC7Z030-1FBV676I Zynq-7000 Kintex-7 FPGA FPGA CPLD system-on-chip ARM Cortex-A9 MPCore CoreSight 125K logic cells 667 MHz processor frequency 676-FCBGA FCBGA package BGA package surface mount Thumb-2 instruction set DDR memory interface industrial temperature grade machine vision
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기