XC7Z030-1FBG676I - 125K Zynq SoC, 667MHz, 676-FCBGA | AMD
MPN: XC7Z030-1FBG676I ✓ Hoạt độngXC7Z030-1FBG676I Tóm tắt
A Zynq system-on-chip is a heterogeneous processing platform that combines an ARM-based microprocessor subsystem with programmable FPGA logic in the same package. The XC7Z030 belongs to the FPGA and CPLD category while integrating an ARM Cortex-A9 MPCore processor, dedicated memory controllers, programmable logic, and debug resources. This combination supports hardware-assisted control, real-time processing, and flexible peripheral or algorithm implementation without requiring separate discrete devices.
Key device characteristics include 125K FPGA logic cells, 667 MHz processor performance, dual ARM Cortex-A9 cores, and CoreSight debug capability. The -1 speed designation identifies the lower-speed grade in the XC7Z030 family, while the industrial I suffix identifies its intended operating-temperature class. The 676-FCBGA package supports high-density interconnect requirements but demands careful PCB layout, substrate design, and thermal planning because of its large ball count and substantial I/O bandwidth.
The device combines hard processor logic with a Kintex-7 FPGA fabric. The processor subsystem executes operating-system or bare-metal software, while the programmable fabric can implement parallel data paths, custom interfaces, accelerators, or protocol logic. This division of work allows software to control system behavior while FPGA logic handles timing-critical operations. Migration between the -1 and -2 speed grades can simplify product planning because the listed device identifiers use the same FBG676 package family, although the processor frequency changes from 667 MHz to 800 MHz.
Typical applications include industrial vision, high-speed data acquisition, network appliances, programmable logic controllers, test and measurement equipment, embedded control systems, and communications infrastructure. The dual-core ARM subsystem supports concurrent control-plane and data-plane software, while the FPGA fabric accelerates parallel processing and reduces external component count. These applications benefit from programmable hardware, deterministic I/O behavior, and integrated debug visibility.
PCB implementation is the dominant hardware consideration. A 676-FCBGA device requires a matched ball pattern, controlled impedance routing, adequate power and ground planes, decoupling close to supply pins, and assembly processes capable of handling the package pitch and thermal requirements. Engineers should use the AMD package placement diagram and the official Zynq-7000 pinout files when assigning board layers and verifying escape routing before schematic capture is released for fabrication.
This product overview combines the device identity, package constraints, speed-grade differences, and practical implementation considerations with verified family alternatives. It also identifies which electrical, thermal, and pin-level attributes require confirmation from AMD documentation before layout release, helping engineers distinguish confirmed product facts from parameters that still need direct design review.
Bộ thay thế dễ dàng lắp đặt cho XC7Z030-1FBG676I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC7Z030-1FBG676I (cùng hình factor và footprint) — khác nhau ở Package, Programmable Logic, Operating Temperature, Processor Architecture, Mounting Type.
XC7Z030-2FBG676I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7Z030-1FBG676C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7Z030-1FFG676C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7Z030-2FFG676I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7Z030-1FBV676I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC7Z030-1FBG676I Tỷ lệ tối đa & tính chất điện
| Device Type | Zynq-7000 Kintex-7 system-on-chip |
| FPGA Logic Cells | 125K logic cells |
| Processor Cores | 2 ARM Cortex-A9 cores |
| Processor Architecture | 32-bit ARM Cortex-A9 MPCore |
| Maximum Processor Frequency | 667 MHz |
| Processor Instruction Set | Thumb-2 |
| Programmable Logic | Kintex-7 FPGA fabric |
| Debug Support | CoreSight |
| Package Type | 676-FCBGA (27 x 27 mm) |
| Package Pin Count | 676 balls |
| Kiểu lắp đặt | Surface mount |
| Speed Grade | -1 |
| Temperature Grade | Industrial, I suffix |
| I/O Supply Values | 1.2 V and 3.3 V |
Hướng dẫn cấu hình chân XC7Z030-1FBG676I 676 balls
Cấu hình chân cho XC7Z030-1FBG676I (676 balls gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC7Z030-1FBG676I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC7Z030-1FBG676I phù hợp cho 6 Áp dụngs: Industrial Machine Vision, High-Speed Data Acquisition, Programmable Logic Controller, Communications Network Appliance, Test and Measurement Equipment, Embedded Control System.
Industrial Machine Vision
The XC7Z030-1FBG676I suits machine-vision controllers that must combine image or sensor processing with deterministic control. Its dual ARM Cortex-A9 cores at 667 MHz can run camera control, communication, and system management software, while the 125K-cell Kintex-7 fabric can accelerate pixel pipelines, implement trigger logic, or handle parallel sensor interfaces. The 676-FCBGA package provides the pin density needed for external memory and high-speed I/O, although the design requires a substrate and PCB capable of supporting the ball pitch. For production use, engineers should verify the available DDR memory interfaces, supported I/O standards, power rails, and thermal performance against the AMD XC7Z030-XC7Z045 data sheet ds191 before finalizing the camera pipeline.
Được đề xuất
High-Speed Data Acquisition
The XC7Z030-1FBG676I is appropriate for acquisition systems that divide work between real-time FPGA logic and higher-level control software. The 125K Kintex-7 cells can implement parallel ADCs, counters, digital filters, packetizers, or buffer-management functions, while the dual Cortex-A9 subsystem handles configuration, calibration, storage, and network communication. Its 667 MHz processor clock provides dedicated control capacity without assigning every sequential task to the programmable fabric. The principal engineering constraint is power and signal integrity: the 676-FCBGA device needs dense decoupling, controlled-impedance routing, careful memory topology, and a thermal solution validated at maximum acquisition activity rather than idle conditions.
Được đề xuất
Programmable Logic Controller
The XC7Z030-1FBG676I provides a modern alternative to a discrete PLC controller when deterministic I/O and programmable hardware are required. The Kintex-7 fabric can implement timing-critical input capture, encoder processing, motion sequencing, or custom fieldbus functions, while the two ARM Cortex-A9 cores run application logic, diagnostics, and communications. Its 125K logic cells provide substantial parallel processing capacity, and the -1 grade runs the processor at 667 MHz for control workloads that do not require the XC7Z030-2FBG676I's 800 MHz rating. Deployment in machinery should include thermal and EMC validation, deterministic boot behavior, safe-state I/O design, and recovery planning for software and programmable-bitstream updates.
Được đề xuất
Communications Network Appliance
XC7Z030-1FBG676I can serve as the processing heart of a network appliance that needs adaptable packet handling alongside a conventional control plane. The ARM Cortex-A9 subsystem can run network services, management interfaces, or protocol stacks, while the FPGA fabric can implement parallel classifiers, compression, encryption acceleration, or custom interface logic. Its 125K logic cells and 676-ball package provide a useful combination of density and I/O capability for products that evolve across hardware revisions. The design must carefully partition time-critical traffic into the fabric, preserve deterministic latency, and provide independent recovery paths for the processor and programmable configuration. Thermal testing should include sustained packet throughput because activity-dependent power can exceed assumptions based on processor utilization alone.
Được đề xuất
Test and Measurement Equipment
The XC7Z030-1FBG676I is useful in instrumentation that combines flexible signal acquisition with a sophisticated user interface. Programmable logic can execute waveform capture, digital pattern generation, timing analysis, or protocol conversion, while the dual Cortex-A9 cores handle instrument control, calibration, data analysis, and graphical or networked interfaces. The 667 MHz processor clock supports operating-system-based control, and the 125K-cell fabric allows measurement algorithms to evolve without changing the board. A practical implementation should isolate analog and sensitive clock paths from the SoC, use the AMD placement and pinout documentation to assign power and ground balls correctly, and model FPGA, DDR, and processor power together when defining the cooling system for long-duration measurements.
Được đề xuất
Embedded Control System
The XC7Z030-1FBG676I supports embedded control systems where an application processor must coexist with hardware-specific logic. The ARM cores can run a real-time operating system, device management, networking, and diagnostics, while the programmable fabric handles proprietary interfaces, motion sequencing, or safety-related monitoring. Its 125K logic cells allow substantial custom hardware to be consolidated into the SoC, and the 676-FCBGA offers extensive connectivity for external memory and I/O. Engineers should treat software isolation, watchdog behavior, configuration security, and controlled upgrade procedures as first-class design requirements. Board validation must include startup sequencing, brownout behavior, thermal cycling, and fault recovery because an integrated programmable device concentrates multiple functions into one high-density package.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC7Z030-1FBG676I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
Review XC7Z030-1FBG676C when environmental requirements permit the commercial temperature class; it retains the 667 MHz speed grade but changes the temperature suffix. Consider XC7Z030-1FFG676C or XC7Z030-2FFG676I only after comparing the exact FFG package placement against FBG676. XC7Z030-1FBV676I requires confirmation of its package-specific electrical assignments and device details.
No direct cross-brand substitute preserves the AMD Zynq toolchain, processor subsystem, FPGA fabric, and 676-ball interface simultaneously. Treat competitor devices as redesign candidates rather than drop-in replacements.
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC7Z030-2FBG676I | XC7Z030-1FBG676C | XC7Z030-1FFG676C | XC7Z030-2FFG676I | XC7Z030-1FBV676I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-FCBGA (27 x 27 mm) | 676-FCBGA (27 x 27 mm) | 676-FCBGA (27 x 27 mm) | 676-FCBGA; package placement must be confirmed | 676-FCBGA; package placement must be confirmed | 676-FCBGA; package placement must be confirmed |
| Temperature Grade | Industrial, I suffix | Industrial, I suffix | Commercial, C suffix | Commercial, C suffix | Industrial, I suffix | Industrial, I suffix |
| Speed Grade | -1 | -2 | -1 | -1 | -2 | -1 |
Bảo phân biệt quan trọng
- Lower speed grade than the -2 alternative (vsXC7Z030-2FBG676I)
- Industrial temperature suffix for extended-environment designs (vsXC7Z030-1FBG676C)
- Original FBG676 package identifier (vsXC7Z030-1FFG676C)
- Dual-core processing with programmable logic in one package (vsXC7Z030-1FBV676I)
Ghi chú thiết kế
Start the board design from the AMD XC7Z30-FBG676/FFG676 package placement diagram rather than a generic 676-ball BGA outline. Assign every power, ground, configuration, memory, and processor signal directly from the official package files, then cross-check the schematic against the Zynq-7000 package pinout resources. This is critical for FFG and FBG ordering codes because the shared 676-ball format does not by itself guarantee identical ball assignments.
Build the power tree for processor, FPGA, memory, and I/O domains separately, then validate startup sequencing and steady-state current using the device's worst-case activity tables. Place decoupling capacitance close to the relevant supply balls and confirm the selected PCB stack-up supports the required layer transitions and current density. If XC7Z030-2FBG676I is substituted for the -1 grade, repeat power and thermal analysis because the 800 MHz processor rating can increase dynamic consumption.
Estimate junction temperature from total SoC, memory, and regulator dissipation rather than FPGA logic-cell utilization alone. Processor activity, DDR traffic, I/O loading, and speed grade can materially change the heat generated by XC7Z030-1FBG676I. Use the AMD power and thermal limits from the XC7Z030-XC7Z045 data sheet, then validate the assembled board with forced-air and enclosure conditions representative of the final product.
Treat DDR memory and other high-speed interfaces as constrained distributed systems. Follow the AMD routing and topology guidance, maintain continuous reference planes where required, control impedance on the chosen stack-up, and avoid splitting return paths beneath active signal layers. Validate the final design with the appropriate signal-integrity simulation and measurement tools because small package, layer-transition, and via differences can materially affect eye margins.
Do not treat a shared 676-FCBGA outline as proof that every FBG676 or FFG676 ordering code is a qualified drop-in replacement. Compare AMD placement diagrams, pinout files, power requirements, speed limits, and temperature ranges for the exact alternate. In particular, the C and I suffixes change environmental suitability, while the -1 and -2 suffixes change processor performance and potentially power and timing margins.
Thông tin tuân thủ
The exact ordering code is industrial-temperature identified, but no RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified in the cited product information. Confirm compliance with AMD for the current production configuration.