Infineon

XMC1100T016F0064ABXUMA1 - 32MHz 64KB Cortex-M0 | Infineon

MPN: XMC1100T016F0064ABXUMA1 ✓ সক্রিয়
3.3 V / 5 V Vdss PG-TSSOP-16-8 Package 32 MHz Speed 64 KB (64K x 8) Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

XMC1100T016F0064ABXUMA1 সারাংশ

The Infineon Technologies XMC1100T016F0064ABXUMA1 is a 32-bit ARM Cortex-M0 microcontroller operating at 32 MHz, with 64 KB of Flash memory and 16 KB of RAM in a PG-TSSOP-16-8 package. It targets compact, cost-sensitive embedded systems that require deterministic control, efficient peripheral integration, and a small surface-mount footprint. The 16-pin package supports space-constrained industrial, communications, appliance, and consumer-control designs.

An ARM Cortex-M0 microcontroller is a 32-bit reduced-instruction-set processor used in embedded control systems. The XMC1000 family combines that processor with Flash, SRAM, general-purpose I/O, timers, serial interfaces, and analog functions. This hierarchy places the device between a basic microcontroller and a more complex application processor: it provides enough deterministic control capability for sensor, actuator, and communication tasks without requiring an external memory interface or high-power processing core.

Key features include a 32 MHz ARM Cortex-M0 core, 64 KB of Flash, 16 KB of RAM, and a 16-pin TSSOP package with an exposed-pad package designation. Up to seven alternate output functions can be assigned to a port pin through the Pn_IOCR.PC register configuration, allowing peripherals to share external pins. These resources suit designs in which board area, BOM cost, and real-time responsiveness are more important than extensive memory capacity.

The AB-step XMC1100 datasheet describes the device as the superset of related derivative devices and explains that derivative-specific functions, ordering designations, and electrical characteristics can vary. Designers should consult the ordering table and pin-description section when assigning package pins. The exposed thermal pad requires careful PCB layout so that heat can move away from the device while preserving the electrical behavior expected by the selected pin configuration.

Typical uses include industrial sensor modules, small motor-control boards, building and appliance controls, communication equipment, and compact power-system controllers. The 64 KB Flash area can hold application firmware and configuration data, while 16 KB of SRAM supports working memory, buffers, protocol stacks, and real-time control loops. The combination of 32 MHz processing and integrated peripherals reduces the need for discrete support components in cost-sensitive embedded products.

When laying out the circuit, treat the exposed pad and associated pads according to the package drawing in the manufacturer datasheet. Preserve the recommended power and decoupling arrangement, route sensitive signals away from switching nodes, and confirm the complete pin map before finalizing the PCB. Firmware development can begin with the Cortex-M0 programming model, but peripheral configuration must follow the XMC1000 register definitions and AB-step documentation.

This product page combines the manufacturer’s XMC1100 AB-step technical documentation with ordering information, same-family alternatives, package details, and practical design guidance. It supports faster component selection while keeping the final schematic and firmware decisions anchored to the manufacturer datasheet and exact orderable part number.

এর জন্য ড্রপ-ইন বিকল্প XMC1100T016F0064ABXUMA1 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible XMC1100T016F0064ABXUMA1 (একই form factor এবং footprint) — পার্থক্য রয়েছে Flash Memory, Package, Architecture, Core, Supply Voltage.

Infineon
Flash Memory: 64 KB
Package: PG-TSSOP-16-8, 16 pins
Architecture: 32-bit
এর সাথে তুলনা করুন XMC1100T016F0064ABXUMA1 →
Infineon
Package: PG-TSSOP-16-8, 16 pins
Core: ARM Cortex-M0, 32-bit RISC
Supply Voltage: 3.3 V or 5 V
এর সাথে তুলনা করুন XMC1100T016F0064ABXUMA1 →

XMC1100T016F0064AAXUMA1

✅ ড্রপ-ইন
📦 PG-TSSOP-16-8
AA device-step suffix replaces AB while core frequency remains 32 MHz and Flash remains 64 KB; derivative features require comparison

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

XMC1100T016F0016ABXUMA1

✅ ড্রপ-ইন
Infineon
📦 PG-TSSOP-16-8
32-bit ARM Cortex-M0 microcontroller · XMC1000 · ARM Cortex-M0 · 32-bit · 32 MHz · Flash · 16 KB · 16K x 8

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

XMC1100T016X0016ABXUMA1

✅ ড্রপ-ইন
📦 PG-TSSOP-16-8
Flash capacity is 16 KB versus 64 KB, a 75% reduction, with a different ordering-code character

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

XMC1100T016X0064ABXUMA1

✅ ড্রপ-ইন
Infineon
📦 PG-TSSOP-16-8
ARM Cortex-M0, 32-bit RISC · 32 MHz · 64 KB (64K x 8) · 16 KB · 3.3 V or 5 V · 12-bit ADC, 8 channels · UART/USART, SPI, I2C · Multi-channel 16-bit timers with PWM output

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

XMC1100-T016F0064-AB

✅ ড্রপ-ইন
📦 PG-TSSOP-16-8
Manufacturer base ordering code has the same 32 MHz core and 64 KB Flash, but excludes the XUMA1 packaging suffix

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

XMC1100T016F0064ABXUMA1 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type 32-bit ARM Cortex-M0 microcontroller
Core ARM Cortex-M0
CPU Frequency 32 MHz
Flash Memory 64 KB (64K x 8)
RAM 16 KB
Architecture 32-bit RISC
Series XMC1000
Device Variant XMC1100-T016F0064-AB
প্যাকেজ PG-TSSOP-16-8
পিন সংখ্যা 16 pins
মাউন্টিং টাইপ Surface mount
সাপ্লাই ভোল্টেজ 3.3 V / 5 V
Alternate Port Output Functions Up to 7 functions per port pin
Product Temperature Class Industrial
Peripheral Configuration Pn_IOCR.PC port output configuration

XMC1100T016F0064ABXUMA1 pg-tssop-16-8 পিন কনফিগারেশন গাইড

XMC1100T016F0064ABXUMA1 (pg-tssop-16-8 প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

XMC1100T016F0064ABXUMA1-এর জন্য pg-tssop-16-8 প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি XMC1100T016F0064ABXUMA1.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

XMC1100T016F0064ABXUMA1 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Sensor Controller, Small Motor-Control Board, Building and Appliance Control, Communication Equipment, Compact Power-System Controller, LED Lighting Controller.

🏭

Industrial Sensor Controller

The XMC1100T016F0064ABXUMA1 fits compact sensor modules that acquire measurements, apply digital filtering, and report results over a serial interface. Its 32 MHz ARM Cortex-M0 core provides timely execution for sampling schedules and protocol handling, while 64 KB of Flash accommodates application firmware and calibration tables. The 16 KB of RAM can support buffers and intermediate filter values. In a PG-TSSOP-16-8 package, the device also leaves PCB area for sensing, protection, and communication circuitry. Validate the selected peripheral assignments against the package pin table before layout.

🏭

Small Motor-Control Board

The XMC1100T016F0064ABXUMA1 can serve as the supervisory controller in a small motor-control design, handling command decoding, timing, fault states, and communication with a dedicated power stage. Its 32 MHz Cortex-M0 core is sufficient for deterministic supervisory tasks, while the 64 KB Flash and 16 KB RAM fit configuration logic and control buffers. The compact TSSOP package is useful when the board must coexist with power devices, current sensing, and protection components. Keep switching-node routing away from sensitive control signals and confirm that the application’s timing and protection requirements are met.

🔧

Building and Appliance Control

The XMC1100T016F0064ABXUMA1 is appropriate for compact appliance controls, building equipment, and user-interface subsystems that coordinate inputs, outputs, timers, and communications. Its 32 MHz processing rate supports responsive state-machine execution without a larger application processor, and the 64 KB Flash capacity provides room for control firmware and product configuration. The PG-TSSOP-16-8 package reduces board footprint in space-constrained products. Designers should use the pin-description table to allocate alternate peripheral functions and should preserve the manufacturer’s decoupling and exposed-pad layout recommendations.

🌐

Communication Equipment

The XMC1100T016F0064ABXUMA1 can act as a protocol controller or auxiliary communications processor in compact equipment. The 32 MHz ARM Cortex-M0 core handles framing, state management, buffer movement, and supervisory logic, while the 16 KB RAM can hold protocol state and transmit/receive buffers. The 64 KB Flash is sufficient for compact firmware rather than large protocol stacks. Its TSSOP-16 package suits small communication modules where component count and board area matter. Match the peripheral instance to the required serial interface and account for alternate port-function routing before PCB assignment.

⚡

Compact Power-System Controller

The XMC1100T016F0064ABXUMA1 can supervise power-system subsystems by reading operating conditions, sequencing commands, and coordinating protection or communication functions. A 32 MHz Cortex-M0 core supports deterministic control-loop tasks, while 64 KB of Flash and 16 KB of RAM are useful for supervisory code, parameter storage, and status buffering. The small PG-TSSOP-16-8 package helps limit board area around power components. Keep the control ground and signal routing compatible with the power stage, and use the manufacturer electrical limits to define isolation, filtering, and operating margins.

💡

LED Lighting Controller

The XMC1100T016F0064ABXUMA1 is suitable for compact LED-lighting controllers that require timed outputs, user commands, diagnostics, and communication. Its 32 MHz Cortex-M0 performance allows fast state updates and timing management, while 64 KB of Flash holds lighting patterns, configuration, and control firmware. The 16 KB RAM supports status variables and communication buffers without external memory. The TSSOP-16-8 footprint helps create compact control boards. Allocate LED-control outputs only after checking their alternate functions and electrical characteristics, and maintain separation between switching outputs and sensitive control paths.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

XMC1100T016F0064AAXUMA1 Same-family XMC1000 controller variant ব্যবহৃত হয়: Industrial Sensor Controller, Small Motor-Control Board, Communication Equipment, Compact Power-System Controller XMC1100T016F0016ABXUMA1 Infineon ব্যবহৃত হয়: Industrial Sensor Controller, Building and Appliance Control, LED Lighting Controller XMC1100T016X0064ABXUMA1 Infineon ব্যবহৃত হয়: Small Motor-Control Board, Compact Power-System Controller XMC1100T016X0016ABXUMA1 XMC1100 control option with 16 KB Flash ব্যবহৃত হয়: Building and Appliance Control, LED Lighting Controller XMC1100-T016F0064-AB Base manufacturer ordering configuration ব্যবহৃত হয়: Communication Equipment
What are the key specifications of XMC1100T016F0064ABXUMA1 that engineers should know?
The XMC1100T016F0064ABXUMA1 is a 32-bit ARM Cortex-M0 microcontroller with a 32 MHz core, 64 KB of Flash, 16 KB of RAM, and a PG-TSSOP-16-8 package. According to the Infineon XMC1100 AB-step datasheet, the device is part of the XMC1000 family and supports up to seven alternate output functions on a port pin. These characteristics make it suitable for compact, cost-sensitive embedded-control products requiring deterministic execution and a small PCB footprint.
What is the operating frequency of XMC1100T016F0064ABXUMA1?
The XMC1100T016F0064ABXUMA1 operates at up to 32 MHz. The Infineon XMC1100 AB-step datasheet identifies it as an XMC1000-series device with an ARM Cortex-M0 core and a 32 MHz clock. This processing rate supports time-partitioned control tasks, serial protocol handling, and digital interface updates while maintaining the simplicity and low system overhead associated with a Cortex-M0 embedded core.
How much Flash and RAM does XMC1100T016F0064ABXUMA1 have?
The XMC1100T016F0064ABXUMA1 provides 64 KB of Flash memory and 16 KB of RAM. The Infineon product listing and XMC1100 AB-step datasheet identify the Flash organization as 64K x 8, while the family ordering information specifies 16 KB of SRAM. This combination is suitable for embedded firmware, configuration tables, communication buffers, and moderate real-time control workloads without external memory.
What package does XMC1100T016F0064ABXUMA1 use?
The XMC1100T016F0064ABXUMA1 uses a PG-TSSOP-16-8 surface-mount package with 16 pins. The Infineon product page describes the device in a TSSOP-16 package, while distributor ordering information identifies the full package code. Its exposed-pad construction makes pad layout and thermal management important when creating the PCB footprint; use the package drawing in the manufacturer datasheet for dimensions and land patterns.
Where can I download the XMC1100T016F0064ABXUMA1 datasheet PDF?
The official XMC1100 AB-step datasheet is available from Infineon at https://www.infineon.com/assets/row/public/documents/30/49/infineon-xmc1100-ab-datasheet-en.pdf. The document describes ordering designations, electrical characteristics, physical characteristics, and features for XMC1100 devices. Use the exact orderable code XMC1100-T016F0064-AB when checking derivative-specific options and the complete ordering information.
Where can I find the XMC1100T016F0064ABXUMA1 pinout?
The pinout is located in the pin-description and package-drawing sections of the Infineon XMC1100 AB-step datasheet. The device uses a PG-TSSOP-16-8 package, and its ports can route up to seven alternate output functions through the Pn_IOCR.PC register settings. Use the datasheet pin table rather than relying on a generic 16-pin diagram because exposed-pad and alternate-function details must follow the exact AB-step package construction.
Where can I buy XMC1100T016F0064ABXUMA1 and what is its price?
Use the Request a Quote form on this XAIPART product page to obtain current commercial terms, pricing, and availability for XMC1100T016F0064ABXUMA1. The exact orderable MPN is XMC1100-T016F0064-AB in the Infineon ordering system, with XAIPART packaging represented by XUMA1. Request a quote for the required quantity and tape-and-reel shipping format before releasing a purchase order.
What is the lead time for XMC1100T016F0064ABXUMA1?
The current lead time for XMC1100T016F0064ABXUMA1 should be confirmed through the Request a Quote form on this page using the required quantity and packaging option. Lead time can vary with the exact suffix, manufacturing status, and order volume, so use the complete MPN when requesting a commitment. The Infineon ordering code XMC1100-T016F0064-AB identifies the underlying device configuration.
Is XMC1100T016F0064ABXUMA1 in stock?
Current stock status for XMC1100T016F0064ABXUMA1 is best confirmed through the Request a Quote form on this page. Specify the required order quantity, shipment quantity, and packaging preference when requesting availability. This avoids relying on a stale distributor snapshot and ensures the response is tied to the exact PG-TSSOP-16-8 orderable part rather than another XMC1100 configuration.
What is the difference between XMC1100T016F0064ABXUMA1 and XMC1100T016F0064AAXUMA1?
Both parts are listed as XMC1000-family, 32 MHz ARM Cortex-M0 microcontrollers with 64 KB of Flash in the PG-TSSOP-16-8 package. The available ordering information indicates that the AB and AA suffixes identify different device steps or variants, so their exact feature and parameter differences must be checked in the manufacturer ordering table. The XMC1100-T016F0064-AB product page identifies the target configuration as industrial.
When should I choose XMC1100T016F0064ABXUMA1 over another XMC1100 configuration?
Choose XMC1100T016F0064ABXUMA1 when the design requires the AB-step XMC1100 configuration, a 32 MHz ARM Cortex-M0 core, 64 KB of Flash, 16 KB of RAM, and a compact PG-TSSOP-16-8 footprint. It is especially relevant to industrial embedded-control boards where those resources and the documented variant are sufficient. Select another density or suffix only when memory, qualification, or ordering requirements exceed this configuration.
Is XMC1100T016F0064ABXUMA1 suitable for a compact industrial sensor controller?
The XMC1100T016F0064ABXUMA1 is suitable for a compact industrial sensor controller when the application fits within 64 KB of Flash and 16 KB of RAM. Its 32 MHz ARM Cortex-M0 core can execute acquisition logic, filtering, digital communications, and actuator timing, while the 16-pin TSSOP package simplifies board density. Confirm operating-temperature limits and exact peripheral assignments in the datasheet before releasing the design.
What can replace XMC1100T016F0064ABXUMA1 without changing the PCB?
The closest documented drop-in choices are same-family XMC1100 configurations in the same PG-TSSOP-16-8 footprint, including XMC1100T016F0064AAXUMA1 and the 16 KB Flash XMC1100T016F0016ABXUMA1. Because Flash capacity or device-step differences can alter firmware behavior, verify memory requirements, peripherals, pin functions, and the ordering table before substitution. Use the Request a Quote form when you need a replacement assessed against your exact requirements.
Is XMC1100T016F0064ABXUMA1 the same as XMC1100T016X0064ABXUMA1?
No, the F and X characters in the ordering codes should not be treated as interchangeable without checking the manufacturer ordering table. XMC1100T016F0064ABXUMA1 is the target 64 KB Flash configuration, while XMC1100T016X0064ABXUMA1 appears under a separate ordering code. Both are associated with the XMC1100 family, but the exact suffix determines the device variant and must be verified before PCB or firmware reuse.
What is the best Infineon equivalent for XMC1100T016F0064ABXUMA1?
The best same-family Infineon alternative is the one whose documented flash, RAM, device step, peripherals, and package match the target design. XMC1100T016F0064AAXUMA1 is a documented 32 MHz, 64 KB Flash XMC1000 option in PG-TSSOP-16-8, while XMC1100T016F0016ABXUMA1 provides 16 KB Flash. Compare the complete ordering information and firmware constraints with the target rather than treating either option as automatically interchangeable.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা XMC1100T016F0064ABXUMA1 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose XMC1100T016F0064ABXUMA1 for compact embedded systems that need the documented AB-step XMC1100 configuration, a 32 MHz ARM Cortex-M0 core, 64 KB of Flash, 16 KB of RAM, and a PG-TSSOP-16-8 package. It is well matched to industrial sensing, appliance control, communication support, compact power supervision, and LED-control boards where deterministic execution and small board area are priorities.

Use XMC1100T016F0064AAXUMA1 when its documented derivative characteristics satisfy the design and the AA device-step variant is the intended configuration. Use XMC1100T016F0016ABXUMA1 or XMC1100T016X0016ABXUMA1 only when 16 KB of Flash is genuinely sufficient; both provide 48 KB less program storage than the target. Use XMC1100T016X0064ABXUMA1 only after verifying its exact ordering characteristics. Because every listed candidate is from the same family and package, board-space reuse is possible, but memory, firmware, peripheral, pin-function, and qualification checks remain mandatory before substitution.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য XMC1100T016F0064AAXUMA1 XMC1100T016F0016ABXUMA1 XMC1100T016X0016ABXUMA1 XMC1100T016X0064ABXUMA1 XMC1100-T016F0064-AB
Brand Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies
Package PG-TSSOP-16-8 PG-TSSOP-16-8 - same PG-TSSOP-16-8 - same PG-TSSOP-16-8 - same PG-TSSOP-16-8 - same PG-TSSOP-16-8 - same
Flash Memory 64 KB 64 KB 16 KB 16 KB 64 KB 64 KB
Series XMC1000 XMC1000 XMC1000 XMC1000 XMC1100 XMC1100

মূল পার্থক্যসমূহ

  • Higher memory capacity within the same XMC1000 package (বনামXMC1100T016F0016ABXUMA1)
  • Four-times the Flash capacity of the reduced-density option (বনামXMC1100T016X0016ABXUMA1)
  • Matches the documented 64 KB Flash XMC1100 configuration (বনামXMC1100-T016F0064-AB)
  • Preserves 64 KB Flash in the documented X ordering family (বনামXMC1100T016X0064ABXUMA1)

ডিজাইন নোট

Create the footprint from the Infineon PG-TSSOP-16-8 package drawing rather than a generic TSSOP-16 land pattern. The package designation includes an exposed-pad construction, so verify the pad count, exposed-pad dimensions, solder-mask opening, and paste pattern against the manufacturer drawing. Place the decoupling capacitor close to the device supply pin and provide a short, low-impedance return path to the appropriate ground reference.

Assign ports only after comparing the required peripheral functions with the package pin table. The XMC1100 supports up to seven alternate output functions on a port pin through Pn_IOCR.PC, but those functions still share the physical pad and its electrical characteristics. Leave no required function on a no-connect or unsuitable alternate-function pin, and verify that a peripheral instance does not conflict with another assigned peripheral.

Keep clock, reset, communication, and analog sensing paths short and away from switching nodes and high-current return paths. If the controller shares a board with relays, motor drivers, or power converters, route sensitive signals through the quiet side of the ground structure and add filtering at connector or switch inputs. The exact rise time and settling requirements should be checked in the manufacturer electrical-characteristics tables.

Do not substitute a same-package ordering code solely from the visible Flash and frequency fields. Device-step characters and derivative ordering codes can change available functions, and the 16 KB Flash alternatives have only one quarter of the target’s 64 KB capacity. Confirm the complete ordering table, pin functions, memory requirement, firmware image size, and peripheral set before approving a replacement.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The target is identified by Infineon as an industrial XMC1100 device. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation.

ডেটা যাচাই করা হয়েছে: 2026-11-16 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

XMC1100T016F0064ABXUMA1 XMC1100T016F0064ABXUMA1 datasheet XMC1100T016F0064ABXUMA1 datasheet pdf XMC1100T016F0064ABXUMA1 pinout XMC1100T016F0064ABXUMA1 price XMC1100T016F0064ABXUMA1 stock XMC1100T016F0064ABXUMA1 replacement XMC1100T016F0064ABXUMA1 equivalent XMC1100T016F0064ABXUMA1 vs XMC1100T016F0064AAXUMA1 Infineon XMC1100T016F0064ABXUMA1 XMC1100T016F0064ABXUMA1 TSSOP-16 XMC1100T016F0064ABXUMA1 application circuit

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Infineon Technologies XMC1100T016F0064ABXUMA1 XMC1100-T016F0064-AB XMC1100T016F0064AAXUMA1 XMC1100T016F0016ABXUMA1 XMC1100T016X0016ABXUMA1 XMC1100T016X0064ABXUMA1 ARM Cortex-M0 32-bit RISC XMC1000 XMC1100 microcontroller embedded microcontroller system-on-chip semiconductor PG-TSSOP-16-8 TSSOP-16 surface mount SMD 64 KB Flash 16 KB RAM 32 MHz Pn_IOCR.PC industrial control
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন