Products (44,000+)

WM8953ECS/RV - 24-Bit Stereo ADC with PLL | Cirrus Logic
WM8953ECS/RV

WM8953ECS/RV - 24-Bit Stereo ADC with PLL | Cirrus Logic

The Cirrus Logic, Inc. WM8953ECS/RV is a low-power stereo analog-to-digital converter with a 24-bit sigma-delta audio ADC, support for 48 kHz sampling, an integrated PLL, and digital I2S or TDM interfaces. It is packaged in a 42-WLCSP and is designed for portable audio systems, mobile handsets, microphone capture, and line-level stereo recording. Four single-ended or differential analog input connections provide flexible source selection, while each input path supports programmable analog gain up to 60 dB. An audio ADC is a data-conversion IC that converts left and right analog audio signals into digital words for processing, storage, transmission, or playback. The WM8953ECS/RV belongs to the broader ADC/DAC and signal-conversion hierarchy, combining a stereo sigma-delta conversion stage, analog input conditioning, clock generation, and a serial digital audio interface in one compact component. This integration reduces the number of separate clock, capture, and routing blocks required in portable equipment. Key features include 24-bit stereo conversion, operation at 48 kHz, four analog input connections, up to 60 dB of analog gain per input path, and a programmable high-pass filter in the ADC signal path. Single-ended or differential input configurations support microphone and line-input architectures. The integrated PLL and choice of I2S or TDM digital interfaces make the device suitable for systems that need predictable audio-clock recovery and flexible connection to application processors or digital audio processors. The sigma-delta ADC architecture prioritizes high-resolution audio conversion while supporting low-power portable-system requirements. Programmable input gain lets the signal chain be adjusted before conversion, while the high-pass filter can help reduce unwanted low-frequency content in voice and microphone recordings. The WLCSP format supports compact PCB layouts, although careful escape routing, exposed-pad thermal management, and clean analog grounding are essential. Typical uses include mobile-handset voice capture, digital voice recorders, headset microphones, portable audio accessories, stereo line-input equipment, and compact consumer devices that accept digital audio from the WM8953ECS/RV. The same integrated conversion and clocking architecture also suits industrial monitoring modules when power consumption, package area, and audio input count are important constraints. Design the analog input network for the intended source impedance and signal amplitude. Keep microphone and line-input traces short, isolate them from switching nodes, place filtering capacitors close to their associated pins, and maintain a continuous ground reference beneath the analog section. The compact 42-WLCSP requires careful assembly planning because its fine-pitch land pattern and exposed thermal area demand accurate stencil, paste, and reflow control. This product page combines the WM8953ECS/RV device identity, interface and conversion details, application guidance, design considerations, sourcing options, and verified manufacturer information to support engineering selection and PCB planning.

RFQ Contact
WM8955LSEFL - Stereo Audio DAC with Speaker Driver | Cirrus Logic
WM8955LSEFL

WM8955LSEFL - Stereo Audio DAC with Speaker Driver | Cirrus Logic

The Cirrus Logic Inc. WM8955LSEFL is a stereo digital-to-analog converter with an integrated headphone and speaker driver, a digital audio PLL, and DSP processing for portable audio products. It operates from a 1.71 V to 3.6 V supply, supports 24-bit conversion, and is offered in a compact 32-QFN 5 x 5 mm package. Cirrus Logic markets the device for portable audio applications where several audio functions must share a small circuit area. An audio DAC is a mixed-signal integrated circuit that converts digital audio samples into analog voltage signals for amplifiers, headphones, or loudspeakers. Within the broader signal-chain hierarchy, the WM8955LSEFL combines a digital-to-analog converter, digital signal processing, clock generation, and output-driver functions. Integrating these blocks reduces the component count and board area required around a portable device's audio output stage. Key device attributes include two output channels, 24-bit resolution, and a 48 kSPS audio sampling rate listed for the WM8955LSEFL. The manufacturer also identifies DSP and I2S interfaces, along with separate analog and digital supply domains. A related WM8955LSEFL/R variant is described as supporting a 96 kSPS sampling rate, demonstrating the family's capability for higher-rate digital audio transmission. The integrated digital processing and PLL allow the converter to derive the required audio clock from a system reference and support multiple serial audio formats. The manufacturer lists DSP and I2S as the principal data interfaces, making the device suitable for application processors and portable audio hosts that provide digital sample streams. Its low-voltage operation suits battery-powered equipment where analog and digital rails commonly sit between 1.8 V and 3.3 V. Typical uses include portable media players, smartphones, tablets, digital audio accessories, and compact consumer products. The WM8955LSEFL can also serve as the output stage in a portable speaker system, reducing the need for separate analog codec and output-amplifier blocks. System designers should confirm the selected host interface, required sampling rate, output configuration, and load impedance against the manufacturer datasheet before releasing a PCB. A key design consideration is the relationship between supply voltage, output drive, and thermal dissipation. Headphone and speaker outputs dissipate power as voltage drop across the output transistors, so sustained high-level playback can raise junction temperature even though the digital interface consumes comparatively little power. Reserve copper around the exposed pad, follow the manufacturer's layout guidance, and place output protection components where they cannot compromise the intended load drive. This page consolidates device specifications, interface details, application guidance, and component-selection considerations for engineers evaluating the WM8955LSEFL in compact audio systems.

RFQ Contact
WM8958ECS/R - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8958ECS/R

WM8958ECS/R - 24-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic WM8958ECS/R is a 24-bit stereo audio codec with 2 ADC channels, 4 DAC channels, I2S and PCM digital audio interfaces, and integrated stereo Class D/AB speaker plus Class W headphone drivers, housed in a 72-pin W-CSP package measuring 4.5 mm by 4.3 mm. An audio codec is a mixed-signal semiconductor that converts between digital audio data and analog microphone, speaker, and headphone signals. It belongs to the codec and audio-interface hierarchy, combines an audio codec, integrated analog-to-digital converters and digital-to-analog converters, and ultimately falls under mixed-signal and signal-processing semiconductors. This integration reduces external components and board area in portable multimedia systems. The WM8958 is designed for smartphones and other portable multimedia devices. Key features include ultra-low-power operation, 24-bit audio conversion, stereo full-duplex asynchronous sample-rate conversion, multiple digital audio channels, integrated Class D/AB speaker amplification, and integrated Class W headphone amplification. It requires two external voltage supplies, while other internal supply rails are generated by integrated low-dropout regulators. Its architecture places an audio hub, converters, digital interfaces, and output-driver functions in one device. The digital side supports I2S and PCM formats, while the analog conversion section supports two ADC inputs and four DAC outputs. The integrated speaker and headphone drivers reduce the need for separate output amplifiers, although external passive filtering, routing, and decoupling networks may still be required by the final circuit design. Typical uses include smartphone and tablet audio hubs, portable media-player headsets, Bluetooth and wireless audio accessories, compact consumer-audio systems, and portable multimedia products. The device is especially relevant where low power, compactness, high-fidelity conversion, integrated headphone drive, and integrated stereo speaker drive are important design priorities. Designers must verify the exact pin assignments, supported audio rates, clocking scheme, speaker-load limits, analog biasing, and decoupling requirements against the manufacturer datasheet before layout. The 4.5 mm by 4.3 mm W-CSP also demands careful escape routing, acoustic inspection, and assembly-process control; trace geometry, component placement, and thermal or power-distribution planning can materially affect audio performance. This product record combines verified manufacturer and distributor information with package-level comparison, application guidance, and engineering-oriented design notes. It also distinguishes documented integrated features from unverified details, avoiding unsupported claims while helping engineers evaluate the WM8958ECS/R for portable audio designs.

RFQ Contact
WM8960CGEFL/RV Stereo Codec with 1W Drivers | Cirrus Logic
WM8960CGEFL/RV

WM8960CGEFL/RV Stereo Codec with 1W Drivers | Cirrus Logic

The Cirrus Logic WM8960CGEFL/RV is a stereo audio codec with integrated Class-D speaker drivers, headphone drivers, and a microphone interface, designed for portable digital audio applications. The device is identified as a 24-bit stereo audio interface in a 32-QFN package measuring 5 x 5 mm, and the verified manufacturer-related data states that it provides 1 W per channel into 8-ohm loads with a 5 V supply. Its combination of digital audio conversion, analog input, headphone output, and integrated speaker amplification allows portable equipment to use one compact audio subsystem instead of separate codec and amplifier packages. A stereo audio codec is an interface IC that converts digital audio data into analog signals and converts analog microphone or line-level inputs back into digital audio data. The WM8960CGEFL/RV belongs to the broader audio interface and power-management hierarchy: audio codec, mixed-signal interface IC, semiconductor, and portable-audio signal-chain component. Its integrated Class-D speaker drivers target compact speaker solutions where PCB area, component count, and low power are important. The headphone drivers support personal-audio outputs, while the microphone interface supports portable voice and communication functions. Verified source data identifies the part as a stereo CODEC with 1 W stereo Class-D speaker drivers and headphone drivers for portable audio applications. The supplied DigiKey result identifies it as a 24-bit stereo audio interface in a 32-QFN 5 x 5 mm package. The WM8960CGEFL/RV is therefore suited to portable audio systems where the digital host interface, analog audio paths, and speaker amplification must coexist in one package. The exact sample rate, voltage range, control interface, and full pin-level electrical limits are not included in the supplied verified data and must be confirmed from the manufacturer datasheet before design release. A key design consideration is analog and power-supply layout. Digital audio clocks and control signals should be kept away from sensitive microphone and headphone paths, while the integrated speaker outputs require careful return-current routing and adequate power delivery. Decoupling must follow the manufacturer’s recommended values and placement because the codec combines digital, analog, headphone, and Class-D output functions in one package. Designers should also verify speaker impedance, load current, thermal conditions, and supply sequencing against the official datasheet before connecting external transducers. Typical uses include portable media players, compact audio accessories, personal-audio products, voice-enabled devices, and small speaker systems. This page consolidates the verified distributor descriptions, package information, identified audio functions, source links, and engineering guidance; it does not substitute unavailable electrical details with assumptions.

RFQ Contact
WM8960CGEFL/V 24-Bit Stereo Codec with 1W Drivers
WM8960CGEFL/V

WM8960CGEFL/V 24-Bit Stereo Codec with 1W Drivers

The Cirrus Logic WM8960CGEFL/V is a 24-bit stereo audio codec with integrated 1 W Class D speaker drivers and headphone drivers, housed in a 32-pin QFN package measuring 5 mm by 5 mm. It is designed for portable digital-audio products that require microphone capture, digital-to-analog conversion, headphone output, and efficient speaker-drive capability in one compact device. An audio codec is a mixed-signal semiconductor that converts digital audio data into analog signals and analog sound into digital data. In the broader IC hierarchy, the WM8960 belongs to the audio-interface and codec family, combining an ADC, DAC, input and output routing, headphone amplification, and Class D speaker drivers within a single package. This integration can simplify portable-audio designs by reducing the number of separate analog and mixed-signal devices required on a circuit board. Key features include 24-bit audio resolution, stereo Class D output capable of 1 W per channel into 8 ohm loads at a 5 V supply, and dedicated headphone-driver support. The 5 mm by 5 mm QFN package has a 1.00 mm height and uses 32 terminals. Its operating temperature range extends from -40 °C to +85 °C, making it relevant to portable consumer equipment, mobile accessories, compact audio systems, and other space-constrained products. The device combines several signal paths in one package: digital audio interfaces, stereo conversion channels, analog inputs, headphone outputs, microphone amplification, and speaker-driver stages. Its integrated speaker capability is especially useful where a compact two-channel audio system is required without deploying separate discrete speaker amplifiers. Designers still need to select the correct digital interface mode, external filtering components, speaker loads, and decoupling network for the intended system. Typical applications include portable media players, headset and docking-station electronics, mobile-device accessories, portable radios, compact recording products, and battery-powered audio equipment. The integrated headphone and speaker outputs can shorten analog routing in designs where the codec must support both private listening and amplified stereo playback. Battery-operated systems also benefit from consolidating multiple audio functions into one package, although final power consumption depends on the selected mode and output loading. PCB implementation should prioritize short, quiet analog and digital-audio routes, solid ground-plane continuity, and placement of decoupling capacitors close to their associated supply pins. Speaker and headphone outputs require attention to EMI and output-noise coupling, while digital interface signals should remain separated from sensitive microphone and analog paths. Follow the manufacturer datasheet for the exact pin assignments, exposed-pad connection, recommended application circuit, and component values. This page organizes the verified device identity, package information, operating limits, sourcing details, cross-reference findings, and practical implementation guidance into a compact engineering reference. It also distinguishes documented drop-in options from broader functional alternatives so that PCB replacement decisions are based on actual compatibility rather than codec similarity alone.

RFQ Contact
WM8962BECSN/R - Stereo 24-Bit Audio Codec | Cirrus Logic
WM8962BECSN/R

WM8962BECSN/R - Stereo 24-Bit Audio Codec | Cirrus Logic

Cirrus Logic WM8962BECSN/R is a low-power stereo audio codec with 24-bit resolution, I2C and SPI control interfaces, and a 49-ball CSP package measuring 3.6 mm by 3.9 mm. It operates from a 1.7 V to 2.0 V supply and supports sampling rates from 8 kHz to 96 kHz, making it suitable for compact embedded audio systems. An audio codec is an interface IC that converts digital audio data into an analog output and converts analog microphone signals into digital PCM data. Within the semiconductor hierarchy, a stereo codec belongs to an audio interface IC, which is part of the broader integrated-circuit category. It is typically paired with an application processor, DSP, amplifier, microphone, speaker, and digital control interface. The WM8962B architecture integrates an ADC and stereo DAC for 24-bit audio processing. Its control interface supports I2C and SPI, allowing firmware to configure registers, mixer paths, and audio playback. The manufacturer product page also identifies an integrated charge pump, a dual-mode charge-pump architecture, and a DC servo. These features support ground-referenced headphone outputs and reduce the need for output DC-blocking capacitors. Integrated stereo Class-D speaker drive, microphone support, and audio-enhancement DSP expand the codec beyond basic signal conversion. The 24-bit processing path supports the full 8 kHz to 96 kHz sampling range, while the 1.7 V to 2.0 V analog supply range targets compact portable equipment. The manufacturer lists an operating temperature range of -40 °C to +85 °C for the exact ordered device. Typical uses include portable media players, mobile multimedia equipment, connected audio products, voice-capture terminals, and compact consumer appliances. Its small CSP footprint is useful where board area is constrained, while integrated headphone and speaker functions can reduce the number of external audio components. Firmware must still verify clocking, filter configuration, mixer routing, and output settings through the I2C or SPI interface. Layout should keep analog supply, ground, microphone, and headphone paths short, with suitable decoupling placed close to the device pins. Digital control traces should remain separated from sensitive analog nodes. The integrated charge pump and DC servo simplify headphone output topology, but external filtering, clock planning, and signal-integrity checks remain essential for low-noise performance. This product page combines the exact ordering information, operating limits, digital interfaces, package data, functional architecture, sourcing path, and engineering guidance for the WM8962BECSN/R. It also distinguishes the exact orderable suffix from the broader WM8962B family designation and identifies where additional board-level design work is required.

RFQ Contact
WM8962ECS/R - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8962ECS/R

WM8962ECS/R - 24-Bit Stereo Audio Codec | Cirrus Logic

The Cirrus Logic WM8962ECS/R is a 24-bit stereo audio codec with I2C and SPI control in a 49-ball WLCSP measuring 3.59 mm by 3.98 mm. The device combines a 98 dB ADC, a 94 dB DAC, and an integrated Class-W headphone amplifier, making it suitable for compact audio products that need high-resolution conversion and efficient headphone drive. An audio codec is an integrated circuit that converts digital audio data into analog signals and analog audio inputs into digital PCM data. It sits between a digital audio host, such as a microprocessor or application processor, and external audio transducers. A typical stereo codec also integrates programmable gain, filters, headphone-output circuitry, and a digital control interface to reduce the number of discrete components required in portable equipment. The WM8962ECS/R provides a 24-bit stereo interface and supports both I2C and SPI control. Its verified 98 dB ADC and 94 dB DAC figures establish the advertised dynamic-range performance for the conversion sections. The ultra-low-power codec architecture targets battery-powered audio equipment where conversion performance, standby consumption, and board area are all important constraints. Its integrated charge pump creates a ground-referenced headphone output, eliminating the need for DC-blocking capacitors on the headphone outputs. The design also uses Cirrus Logic Class-W amplifier techniques and a dual-mode charge-pump architecture to optimize efficiency and power consumption during playback. A DC servo reduces output ground offsets, improving headphone-output behavior and simplifying the external signal path. Typical uses include smartphone and tablet audio paths, portable media players, connected audio accessories, digital personal audio devices, and compact consumer equipment with analog headphone outputs. The combination of a 49-ball WLCSP, integrated stereo converters, flexible digital control, and capacitor-free headphone outputs is especially useful when PCB area is constrained. Designers should verify the complete pin assignment, exposed-ball configuration, supported digital audio formats, clocking requirements, and analog routing against the manufacturer datasheet before layout. Decoupling, analog grounding, headphone routing, and charge-pump layout remain critical because this highly integrated device combines sensitive converters, digital interfaces, and switching amplification on one small package. This page combines verified distributor availability, exact package information, converter-performance figures, and manufacturer-described charge-pump and Class-W features. It also records where complete specifications are unavailable, preventing unsupported electrical values from being presented as engineering facts.

RFQ Contact
WM8962ECSN/R - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8962ECSN/R

WM8962ECSN/R - 24-Bit Stereo Audio Codec | Cirrus Logic

The Cirrus Logic WM8962ECSN/R is a 24-bit stereo audio codec with I2C and SPI control interfaces, audio-enhancement DSP, and a 49-WLCSP package measuring 3.59 mm by 3.98 mm. It combines digital-to-analog and analog-to-digital conversion in a compact surface-mount package intended for audio processing and signal-chain designs. An audio codec is an interface IC that converts digital audio data into analog signals and analog sound signals into digital data. As a stereo codec, the WM8962ECSN/R handles two audio channels. Its 24-bit data resolution supports high-resolution audio architectures, while the integrated audio-enhancement DSP provides processing functions within the same device rather than requiring a separate external processor for supported use cases. The WM8962ECSN/R supports both I2C and SPI control buses, giving the host processor a choice of communication methods. I2C is useful in compact systems where pin count and wiring simplicity are priorities, while SPI can provide a different host-interface tradeoff when clocking and data-transfer characteristics suit the application. The exact register implementation, supported audio formats, and control sequence should be confirmed in the manufacturer datasheet. The physical package is a 49-WLCSP with a stated body size of 3.59 mm by 3.98 mm. Other manufacturer-listing data describes the package as PBGA49 or WCSP-49, approximately 3.60 mm by 3.90 mm, with 0.50 mm pitch, 0.70 mm height, MO-211C construction, and lead-free construction. These dimensions make the device suitable for compact portable and embedded audio products where board area is tightly constrained. Typical design environments include portable media devices, smart audio endpoints, headset and microphone signal chains, multimedia appliances, and embedded systems requiring stereo conversion. System-level success depends on correct analog input and output routing, suitable decoupling, clean power rails, an appropriately designed clock source, and layout that separates sensitive audio signals from digital switching activity. PCB implementation should follow the manufacturer land pattern and pin-assignment table exactly. Place input and output capacitors adjacent to their relevant device pins, provide a continuous ground reference, and keep high-speed digital clock and control routing away from microphone or line-level analog inputs. Validate the assembled design for channel crosstalk, idle-channel noise, clock jitter sensitivity, and start-up behavior. This product page consolidates the confirmed package, interface, resolution, and sourcing information while distinguishing documented facts from details that must be checked against the current manufacturer datasheet. It also identifies same-brand stereo-codec alternatives that require explicit pin, feature, and sample-rate validation before being treated as drop-in replacements.

RFQ Contact
WM8963ECSN/R - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8963ECSN/R

WM8963ECSN/R - 24-Bit Stereo Audio Codec | Cirrus Logic

The Cirrus Logic WM8963ECSN/R is a 24-bit stereo audio interface and codec with I2C and SPI control, packaged as a 49-ball WLCSP measuring 3.59 mm by 3.98 mm. Its compact surface-mount format supports space-constrained audio products where the digital host interface, analog audio path, and physical footprint must coexist within a small board area. An audio codec is an interface IC that converts digital audio samples into analog signals and, depending on the implementation, supports analog signal conversion in the opposite direction. Within the broader semiconductor hierarchy, a codec belongs to the audio interface family, connects into the signal-processing and power-management portions of a system, and is controlled by a host processor through a serial bus. The WM8963ECSN/R combines that interface role with a stereo-audio focus and a 24-bit resolution identifier. The WM8963ECSN/R supports both I2C and SPI host-control interfaces, allowing a system architect to select the digital control method that best fits the processor, firmware, board-routing constraints, and peripheral configuration. Its 49-ball WLCSP is intended for high-density PCB assembly. The package dimensions are 3.59 mm by 3.98 mm, making physical design checks essential when placing the codec beside an application processor, memory, amplifier, connector, and microphone circuitry. The 49-ball package provides the physical interface for the codec's power, digital control, data, analog audio, and supporting functions. Because the complete pin-assignment and signal descriptions must match the exact ball numbering of this package, use the Cirrus Logic datasheet ball table when creating the symbol, assigning PCB nets, and checking exposed-ball or thermal requirements. Do not infer a ball function from the package name or from a diagram belonging to another package variant. Typical uses include portable audio equipment, smart speakers, voice-control products, headsets, soundbars, and compact embedded systems. The I2C option is particularly useful for low-pin-count control architectures, while SPI can suit systems that already use that bus for peripherals or require a different control timing strategy. The stereo codec can sit between a digital audio processor and an analog output stage, allowing host-generated audio to be converted for downstream amplification. PCB implementation should prioritize short analog and digital audio routes, continuous ground references, and placement of required bypass capacitors near the associated balls. Review the manufacturer reference circuit and pin table for the exact supply, interface, analog, and clock connections. Pay particular attention to exposed-ball requirements, board-cleanliness practices, and the relationship between power-entry points and sensitive audio nodes. This product record combines package identification, interface facts, application guidance, sourcing questions, and design checks in one concise reference. It also separates verified catalog attributes from detailed electrical parameters that still require confirmation from the manufacturer datasheet, helping engineers evaluate the WM8963ECSN/R before committing to a high-density PCB layout.

RFQ Contact
WM8974CGEFL/V - 24-Bit Mono Audio Codec | Cirrus Logic
WM8974CGEFL/V

WM8974CGEFL/V - 24-Bit Mono Audio Codec | Cirrus Logic

The Cirrus Logic WM8974CGEFL/V is a 24-bit mono audio codec with an integrated speaker driver, built-in phase-locked loop, and on-chip digital gain, packaged in a 24-pin QFN configuration with an exposed pad. The device is identified as a 4 mm by 4 mm surface-mount audio interface and is intended for compact systems requiring digital audio playback, microphone capture, and direct speaker-drive capability. An audio codec is a semiconductor interface that converts digital audio samples into analog signals, converts analog microphone signals into digital data, and often includes programmable gain, filtering, and output-driver functions. Within the wider hierarchy, the WM8974CGEFL/V belongs to the audio codec category, which is part of interface ICs and ultimately serves as a mixed-signal subsystem within a power-management and signal-processing architecture. Its integrated speaker driver can reduce the number of separate output components required in small audio systems. The WM8974CGEFL/V provides a 24-bit audio interface, digital gain control, an integrated phase-locked loop, and a mono speaker-driver stage. Its -40 °C to +85 °C operating-temperature range supports industrial and commercial equipment. The 24-QFN exposed-pad package also promotes heat transfer through the PCB copper area, although actual thermal performance depends on the layout, copper area, surrounding temperature, and audio-output load. Digital gain is particularly useful in systems where the software or system controller must adjust playback level without changing passive components. The built-in phase-locked loop supports systems in which the audio clock must be derived from or synchronized with another digital block. The mono codec architecture is suited to products such as alarm systems, industrial annunciators, compact voice terminals, and embedded audio modules that need one amplified audio path rather than a full stereo codec. Typical applications include industrial audible alarms, building-control panels, communication terminals, portable voice accessories, and embedded control systems with a local speaker. In these designs, the codec can accept digital audio from a host processor, provide programmable gain, and drive a loudspeaker through the integrated output stage. The exposed pad remains a functional part of the package and should be connected according to the manufacturer's recommended footprint and thermal layout. PCB design should preserve the recommended decoupling topology and keep analog and digital return currents controlled. Place input, output, and bypass capacitors close to their associated pins, connect the exposed pad to the intended ground or pad-design net, and maintain the manufacturer-specified footprint dimensions. Audio performance also depends on correct clocking, speaker loading, analog grounding, and separation from switching noise. This product record combines the exact package, temperature, interface, and feature information with practical design guidance, sourcing instructions, and an explicit drop-in compatibility assessment. The comparison focuses on true pin-to-pin replacements rather than broadly similar codecs that require a different footprint, pin assignment, clock arrangement, or power architecture.

RFQ Contact
WM8978CGEFL/V - 24-Bit Stereo Codec | Wolfson
WM8978CGEFL/V

WM8978CGEFL/V - 24-Bit Stereo Codec | Wolfson

The Wolfson Microelectronics plc WM8978CGEFL/V is a 24-bit stereo audio codec with an integrated speaker driver, digital I2S/PCM interfaces, and analog microphone, headphone, and line-output stages in a 32-QFN 5 x 5 mm package. It combines several signal-path functions commonly required in portable multimedia equipment, reducing the need for separate microphone, headphone, and speaker amplifiers. A stereo audio codec is a mixed-signal interface IC that converts digital audio samples into analog signals and accepts analog microphone signals before converting them back into digital audio. In the broader device hierarchy, the WM8978 belongs to the audio codec category, integrates into interface ICs, and ultimately supports portable audio systems such as multimedia phones, digital still cameras, and digital camcorders. The WM8978CGEFL/V integrates preamplifiers for stereo differential microphones and includes drivers for speakers, headphones, and differential or stereo line outputs. Its published interface format is 24-bit I2S/PCM, while its 32-QFN package measures 5 x 5 mm. This integration can shorten analog routing, reduce external amplifier count, and simplify portable-product layouts when the board area and power budget are tightly constrained. Its mixed-signal architecture supports a compact portable audio signal chain. Digital audio enters through the I2S or PCM interface, while the codec manages microphone capture and analog playback paths. The 5 x 5 mm QFN-32 package requires careful PCB layout because its exposed thermal pad and fine-pitch perimeter connections affect soldering, return paths, and heat spreading. Exact electrical ratings, sampling rates, clock requirements, and output-power limits must be confirmed from the manufacturer datasheet before layout release. Typical uses include portable media players, multimedia phones, digital cameras, camcorders, and compact audio accessories. It may also fit smart-home or embedded devices that need one IC for digital-to-analog playback, microphone capture, headphone output, and speaker drive. Designers should confirm that the selected speaker, microphone, and output network remain within the device's electrical and acoustic limits. A key design consideration is analog layout discipline. Place input and output capacitors near their associated pins, maintain short and symmetric analog routes, keep switching-supply and digital-clock nodes away from microphone inputs, and follow the datasheet reference layout for component selection and exposed-pad connection. Confirm the exact schematic values and pin definitions before production release. This product page combines the WM8978CGEFL/V interface and package details, replacement considerations, application guidance, comparison parameters, and practical layout notes to support faster component selection and hardware design.

RFQ Contact
WM8983GEFL/RV - Stereo 24-Bit Audio Codec | Cirrus Logic
WM8983GEFL/RV

WM8983GEFL/RV - Stereo 24-Bit Audio Codec | Cirrus Logic

The Cirrus Logic WM8983GEFL/RV is a stereo mobile multimedia audio codec with 24-bit I2S and PCM interfaces, two ADC channels, two DAC channels, and an integrated 1 W speaker driver. It is packaged in a 32-pin QFN package measuring 5 mm by 5 mm. The combination of stereo conversion, digital audio interfaces, and direct speaker-drive capability makes the device suitable for portable equipment in which a separate speaker amplifier would increase board area and system complexity. An audio codec is an interface IC that converts analog audio signals into digital data and digital audio data back into analog signals. In a portable multimedia system, the WM8983GEFL/RV can sit between microphones or line-level audio inputs and an I2S or PCM-capable processor. Its speaker-drive capability can then provide an efficient output path for a small speaker or headphone-oriented audio subsystem. The WM8983GEFL/RV provides 24-bit audio resolution, stereo ADC and DAC channels, I2S and PCM data formats, and a 1 W speaker-driver stage. These features support modern digital audio processors while keeping the external component count relatively low. The 5 mm by 5 mm 32-QFN package also supports compact board layouts, although its exposed thermal pad and fine-pitch footprint require careful PCB layout and assembly planning. The device is described as a low-power, high-quality stereo codec intended for portable multimedia applications. Its integrated speaker driver reduces the need for a separate output amplifier in suitable low-power designs. Designers should still verify the speaker impedance, output waveform, thermal conditions, and supply configuration against the manufacturer datasheet before establishing a production design. Typical uses include portable media players, personal audio products, compact consumer electronics, mobile accessories, and embedded multimedia terminals. The I2S interface suits processors with a dedicated digital-audio peripheral, while PCM support offers an additional digital connection format. These interfaces allow captured or generated audio to be transferred digitally without external high-speed converters. The 32-QFN footprint requires attention to pad layout, exposed-pad soldering, and via placement. Keep analog input, headphone, and speaker outputs away from clock and data routing where practical, and follow the manufacturer’s recommended decoupling and grounding arrangement. Digital interfaces should be driven only when signal levels and timing comply with the device’s electrical limits. This page consolidates the available interface, resolution, channel-count, package, and speaker-drive information, adds practical application guidance, and identifies the limits of a replacement decision. Pin-level design work should use the manufacturer datasheet pin description and application information rather than inferring connectivity from the package outline.

RFQ Contact
WM8983GEFL/V - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8983GEFL/V

WM8983GEFL/V - 24-Bit Stereo Audio Codec | Cirrus Logic

The Cirrus Logic WM8983GEFL/V is a low-power, high-quality stereo audio codec designed for portable multimedia equipment. It combines two 24-bit ADCs, two 24-bit DACs, digital audio interfaces for I2S and PCM data, analog input and output mixing, and a 1 W mono speaker driver in a 32-QFN (5x5 mm) surface-mount package. A multimedia CODEC is a mixed-signal semiconductor that converts between digital audio streams and analog microphone, headphone, line, or speaker signals. Its functional hierarchy places the WM8983 among audio interface ICs, within audio codecs and ultimately the broader category of interface ICs. Integrating conversion, analog mixing, and speaker amplification reduces the number of discrete components required in portable audio designs. The WM8983 provides 24-bit stereo ADCs and 24-bit stereo DACs, with I2S and PCM digital interfaces for connection to a host processor or digital audio bus. Its flexible analog mixing block supports combined playback and voice communication paths. The integrated 1 W speaker drive output allows the codec to drive a small loudspeaker directly, making it useful where a separate headphone amplifier is not required. The device is supplied in a compact 32-QFN (5x5 mm) package suited to space-constrained handsets, portable media players, personal audio products, and embedded multimedia systems. Its low-power design targets battery-operated equipment where converter efficiency, standby behavior, and analog signal integrity influence both system heat and playback quality. Typical uses include portable music players, mobile media devices, voice-capable portable electronics, compact speakers, and multifunction personal-audio products. The stereo recording path can capture analog microphone or line-level inputs, while the DAC path and analog mixer provide digital playback, voice monitoring, and direct speaker output within one device. When laying out a WM8983GEFL/V board, place decoupling capacitors at the supply pins and route analog and digital return currents carefully to prevent codec noise from coupling into microphone or speaker signals. Confirm the exact clocking, digital-interface mode, and exposed-pad connection against the manufacturer datasheet before release. This page organizes the confirmed WM8983GEFL/V capabilities, package information, sourcing path, and engineering trade-offs for engineers evaluating stereo audio codec implementations. It also distinguishes the documented order-code variants and identifies where a genuine pin-to-pin substitute must be validated rather than assumed.

RFQ Contact
WM8985CGEFL Stereo Audio Codec | Cirrus Logic | 32-QFN
WM8985CGEFL

WM8985CGEFL Stereo Audio Codec | Cirrus Logic | 32-QFN

The Cirrus Logic WM8985CGEFL is a stereo audio interface and multimedia codec with 24-bit I2S and PCM digital audio support. It is packaged in a 32-QFN (5x5 mm) surface-mount package and is associated with Class D headphone-driver functionality. The part is intended for compact embedded audio systems where a single codec must handle digital audio interfaces, analog audio conversion, and headphone-output support. A multimedia codec is an integrated audio interface IC that converts between digital audio streams and analog audio signals while providing control and signal-conditioning functions for speakers, headphones, microphones, and line-level circuitry. The WM8985CGEFL sits within the broader hierarchy of audio codec, audio interface IC, multimedia IC, and semiconductor. The WM8985CGEFL is identified in distributor listings as a stereo audio interface supporting 24-bit I2S and PCM formats. Its 32-QFN (5x5 mm) package supports high-density PCB layouts and is suitable for portable equipment, consumer audio products, communications equipment, and embedded audio platforms. The listing also identifies Class D headphone-driver support as a key feature for applications requiring efficient headphone amplification. The 5x5 mm QFN format can help reduce board area compared with larger leaded packages, but exposed-pad thermal management and careful PCB layout remain important. Decoupling capacitors should be placed close to the device power pins, while analog and digital ground and power connections should follow the manufacturer pin-description and layout guidance. Signal-routing decisions should also account for the 24-bit audio path and the separation of analog and digital sections. Typical uses include USB and embedded audio accessories, portable media equipment, communications terminals, smart-device audio paths, and compact headphone interfaces. A system designer should confirm the complete electrical limits, clocking requirements, supported sample rates, analog input/output limits, and pin-level connections against the manufacturer datasheet before releasing a PCB. This product page consolidates the exact WM8985CGEFL package and interface information into a structured component record. It also identifies the intended codec use cases and distinguishes the documented part from unsupported substitute claims. When replacing an existing WM8985CGEFL, verify the complete 32-pin land pattern, exposed-pad connection, digital audio format, clock configuration, analog biasing, and supply sequencing rather than relying on the codec function alone. A functionally similar audio codec is not automatically a pin-to-pin drop-in replacement.

RFQ Contact
WM8985CGEFL/R Stereo Audio Codec | Cirrus Logic | 32-QFN (Tape & Reel)
WM8985CGEFL/R

WM8985CGEFL/R Stereo Audio Codec | Cirrus Logic | 32-QFN (Tape & Reel)

The Cirrus Logic WM8985CGEFL/R is a stereo audio interface and multimedia codec with 24-bit I2S and PCM digital audio support. It is packaged in a 32-QFN (5x5 mm) surface-mount package and is associated with Class D headphone-driver functionality. The part is intended for compact embedded audio systems where a single codec must handle digital audio interfaces, analog audio conversion, and headphone-output support. A multimedia codec is an integrated audio interface IC that converts between digital audio streams and analog audio signals while providing control and signal-conditioning functions for speakers, headphones, microphones, and line-level circuitry. The WM8985CGEFL/R sits within the broader hierarchy of audio codec, audio interface IC, multimedia IC, and semiconductor. The WM8985CGEFL/R is identified in distributor listings as a stereo audio interface supporting 24-bit I2S and PCM formats. Its 32-QFN (5x5 mm) package supports high-density PCB layouts and is suitable for portable equipment, consumer audio products, communications equipment, and embedded audio platforms. The listing also identifies Class D headphone-driver support as a key feature for applications requiring efficient headphone amplification. The 5x5 mm QFN format can help reduce board area compared with larger leaded packages, but exposed-pad thermal management and careful PCB layout remain important. Decoupling capacitors should be placed close to the device power pins, while analog and digital ground and power connections should follow the manufacturer pin-description and layout guidance. Signal-routing decisions should also account for the 24-bit audio path and the separation of analog and digital sections. Typical uses include USB and embedded audio accessories, portable media equipment, communications terminals, smart-device audio paths, and compact headphone interfaces. A system designer should confirm the complete electrical limits, clocking requirements, supported sample rates, analog input/output limits, and pin-level connections against the manufacturer datasheet before releasing a PCB. This product page consolidates the exact WM8985CGEFL/R package and interface information into a structured component record. It also identifies the intended codec use cases and distinguishes the documented part from unsupported substitute claims. When replacing an existing WM8985CGEFL/R, verify the complete 32-pin land pattern, exposed-pad connection, digital audio format, clock configuration, analog biasing, and supply sequencing rather than relying on the codec function alone. A functionally similar audio codec is not automatically a pin-to-pin drop-in replacement.

RFQ Contact
WM8988LGECN/V - Stereo 24-Bit Audio Codec | Cirrus Logic
WM8988LGECN/V

WM8988LGECN/V - Stereo 24-Bit Audio Codec | Cirrus Logic

The Cirrus Logic WM8988LGECN/V is a low-power stereo audio codec with a 24-bit interface, synchronous operation, and CMOS technology in a 28-pin QFN package measuring 4 mm by 4 mm. Designed for portable audio equipment, it combines stereo signal processing and digital audio interfacing in a compact surface-mount package rated for -25°C to +85°C operation. An audio codec is an interface IC that converts digital audio data into an analog audio signal, converts analog audio back into digital data, or performs both functions. In the broader hierarchy, a codec belongs to the audio interface family, then to interface ICs, and finally to integrated circuits. Stereo codecs support two audio channels and are commonly used where a system needs headphone, microphone, line, or speaker-path processing without a large discrete analog implementation. The WM8988LGECN/V is identified as a 24-bit stereo audio interface with low-power operation. Its synchronous CMOS implementation provides a defined digital interface for portable audio systems. The 28-QFN package also reduces board footprint compared with larger leaded or high-pin-count packages, making the device suitable for space-constrained consumer and portable products. The part operates over a -25°C to +85°C temperature range and uses a 4 mm by 4 mm QFN package with 28 terminals. Its operating architecture is described as synchronous, which helps coordinate digital audio transfer with the associated system clock and data signals. The package and temperature specification support applications that require a compact, surface-mount audio interface rather than a through-hole codec solution. Typical applications include portable music players, headphone-equipped personal audio products, connected audio accessories, and compact consumer systems requiring stereo playback or recording. The 24-bit interface and low-power design are especially relevant when product designers need audio conversion performance while preserving board area and system power budget. PCB implementation should follow the manufacturer datasheet for exposed-pad connection, decoupling, clock routing, and analog layout. A QFN package also requires careful assembly inspection because its fine-pitch leads and exposed thermal pad are difficult to inspect visually after soldering. Confirm pin assignments and recommended component values against the manufacturer datasheet before releasing the layout.

RFQ Contact
WM8993ECS/RV - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8993ECS/RV

WM8993ECS/RV - 24-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic WM8993ECS/RV is a 24-bit stereo audio interface IC with two ADCs, two DACs, sigma-delta conversion, a stereo speaker driver, and a Class W headphone driver. The device is supplied in a 48-terminal WLCSP package measuring 3.65 mm by 3.55 mm, making it suitable for compact portable audio equipment. Its nominal supply voltage is 1.2 V, and its specified operating temperature range extends from -40°C to 85°C. An audio codec is an interface IC that converts analog audio signals into digital data and reconstructs digital audio into analog signals. As part of the broader hierarchy of audio interface ICs, codecs connect microphones, speakers, headphones, and other analog audio hardware to a digital audio processor. Their conversion architecture, signal-to-noise performance, integrated analog drivers, package size, and power requirements determine how effectively they fit portable and embedded systems. The WM8993ECS/RV combines a 24-bit resolution with two ADCs and two DACs in a single device. Listed ADC and DAC signal-to-noise ratios are 95 dB and 100 dB, respectively. Sigma-delta conversion supports high-resolution digital audio processing, while the integrated stereo speaker and Class W headphone drive functions reduce the need for separate output-driver circuitry in suitable speaker and headphone loads. The WM8993ECS/RV belongs to the Wolfson audio-hub family associated with Cirrus Logic. Its integration is valuable in space-constrained systems because analog capture, digital playback, and headphone or speaker drive functions are consolidated within one 3.65 mm by 3.55 mm package. Exact clocking, supported sample rates, analog input configuration, output-power ratings, and control-interface details must be confirmed against the manufacturer datasheet before schematic capture. Typical uses include smartphone and tablet audio, portable media players, Bluetooth audio accessories, headset electronics, compact voice-capture equipment, and connected audio products. The low-profile WLCSP footprint supports high-density PCB construction, while the integrated drivers can simplify signal routing compared with a discrete codec-and-amplifier implementation. Designers should verify the supported microphone and line-input topology, required external passive components, digital interface voltage levels, clock sources, and thermal performance for the selected speaker impedance. The package also requires careful PCB layout with short analog paths and appropriate grounding to preserve signal integrity in compact systems. This product page combines the manufacturer-part characteristics, converter configuration, package details, application guidance, and verified sourcing links into one engineering-focused reference. It also distinguishes directly documented attributes from parameters that must be confirmed during component selection and hardware validation.

RFQ Contact
WM8998ECS/R - 24-Bit Hi-Fi Audio Hub | Cirrus Logic
WM8998ECS/R

WM8998ECS/R - 24-Bit Hi-Fi Audio Hub | Cirrus Logic

Cirrus Logic WM8998ECS/R is a 24-bit HD audio hub and SLIMbus audio interface housed in a 117-WCSP package measuring 5.35 mm by 4.09 mm. The verified distributor records identify the device as a Hi-Fi coding-switch solution intended for compact digital audio systems. Its interface orientation makes it suitable for products that require a low-power, highly integrated audio front end while retaining a digital audio link to a host processor. An audio codec is an integrated circuit that converts digital audio data into an analog output and converts analog microphone or line inputs back into digital data. In the product hierarchy, a codec is an audio interface IC within the broader class of interface ICs. The WM8998ECS/R is positioned for portable and embedded audio functions where component count, board area, and host connectivity are important design constraints. The verified product listing specifically identifies a 24-bit HD audio interface, SLIMbus connectivity, and a 117-WCSP package. These confirmed attributes make the part relevant to smartphone, tablet, portable-media, headset, and embedded-audio designs. The 5.35 mm by 4.09 mm package reduces board footprint, although its 117-ball construction requires careful assembly, inspection, and PCB-layout planning. Technical evaluation must be completed against the manufacturer datasheet because the supplied distributor results do not expose the complete electrical tables. Sample rate coverage, supported clock rates, microphone bias, codec specifications, digital levels, power-supply requirements, and thermal limits are not available in the verified data and therefore cannot be safely inferred. Designers should also confirm the exact exposed-pad, ball-map, and recommended-land-pattern details before layout release. Typical implementation places the WM8998ECS/R between one or more analog audio transducers and a digital audio host connected through SLIMbus. Its integrated hub role can simplify system routing in devices containing speaker, headphone, microphone, and line-level audio paths. The correct external amplifiers, passive network, clocking, and decoupling must be selected from the manufacturer reference design rather than inferred from the distributor summaries. The primary design consideration is PCB implementation. A 117-WCSP package has a much denser interconnect than a conventional leaded package and can create soldering, inspection, and repair challenges. Confirm whether the assembled board will use optical inspection or X-ray inspection, and use the manufacturer-approved footprint and reflow profile to reduce assembly defects. The verified data does not expose pin names, so a complete ball assignment cannot be published here. This product record combines verified distributor pricing, package information, sourcing links, and engineering-oriented selection guidance. It also separates confirmed facts from unavailable datasheet parameters and avoids presenting generic codec specifications as facts about the WM8998ECS/R.

RFQ Contact
WM9001GEFL - 1W Class AB/D Speaker Driver | Cirrus Logic
WM9001GEFL

WM9001GEFL - 1W Class AB/D Speaker Driver | Cirrus Logic

The Cirrus Logic WM9001GEFL is a 1 W mono dual-mode Class AB and Class D speaker driver packaged in a 16-pin QFN with an exposed pad. The distributor data identifies it as an audio amplifier IC with a 1 W output rating, Class AB and Class D operating modes, and a compact 3 x 3 mm QFN package. These characteristics place it in the speaker-driver hierarchy of audio amplifier ICs used to drive small electrodynamic transducers. A speaker-driver amplifier is an integrated circuit that accepts an analog audio signal and delivers enough current and voltage to move a miniature speaker cone. The dual-mode architecture gives a system designer the option to select Class AB behavior for linear output or Class D behavior for higher conversion efficiency. The WM9001GEFL is therefore positioned for compact audio products where speaker output, board area, and energy consumption must be balanced. The WM9001GEFL's principal verified specifications are its 1 W output capability, single-channel mono configuration, support for both Class AB and Class D amplification, and 16-QFN package with an exposed pad. The exposed pad supports heat transfer from the IC into the printed circuit board. Because no verified voltage, current, frequency-response, distortion, thermal-resistance, or shutdown information was supplied, those values must be confirmed in the manufacturer datasheet before final design release. Technically, this device belongs to the integrated-circuit amplifier family and more specifically to speaker-driver audio ICs. Its 3 x 3 mm QFN package supports high-density PCB layouts but demands careful control of exposed-pad soldering, copper thermal paths, and acoustic-mechanical layout. Class AB and Class D modes can also differ in EMI behavior and power efficiency, so mode selection should be based on the complete analog path, speaker impedance, and enclosure conditions rather than package size alone. Typical uses include portable-device speakers, compact consumer-audio products, personal-audio accessories, small embedded audio systems, and accessory modules requiring a mono 1 W drive stage. In these applications, the device can sit near the speaker connector to shorten the high-current output path, reduce load-related board losses, and simplify the analog architecture. Designers should still validate output power at the intended speaker impedance and frequency range. The primary design consideration is thermal management. Although the package includes an exposed pad, continuous Class AB output near the 1 W rating can dissipate more power than Class D operation. The pad should be connected to a suitable ground plane and thermal copper area, while input, feedback, and output routing should avoid the loudspeaker return path. Decoupling and output-filter values must come from the manufacturer application guidance. This product record consolidates verified distributor inventory, package information, source links, engineering caveats, and selection guidance that are not consolidated on a typical distributor listing. Where the supplied evidence does not establish a parameter or a true pin-compatible substitute, the record explicitly marks the gap rather than presenting an unsupported value.

RFQ Contact
WM9001GEFL/R - 1W Class AB/D Speaker Driver | Cirrus Logic (Tape & Reel)
WM9001GEFL/R

WM9001GEFL/R - 1W Class AB/D Speaker Driver | Cirrus Logic (Tape & Reel)

The Cirrus Logic WM9001GEFL/R is a 1 W mono dual-mode Class AB and Class D speaker driver packaged in a 16-pin QFN with an exposed pad. The distributor data identifies it as an audio amplifier IC with a 1 W output rating, Class AB and Class D operating modes, and a compact 3 x 3 mm QFN package. These characteristics place it in the speaker-driver hierarchy of audio amplifier ICs used to drive small electrodynamic transducers. A speaker-driver amplifier is an integrated circuit that accepts an analog audio signal and delivers enough current and voltage to move a miniature speaker cone. The dual-mode architecture gives a system designer the option to select Class AB behavior for linear output or Class D behavior for higher conversion efficiency. The WM9001GEFL/R is therefore positioned for compact audio products where speaker output, board area, and energy consumption must be balanced. The WM9001GEFL/R's principal verified specifications are its 1 W output capability, single-channel mono configuration, support for both Class AB and Class D amplification, and 16-QFN package with an exposed pad. The exposed pad supports heat transfer from the IC into the printed circuit board. Because no verified voltage, current, frequency-response, distortion, thermal-resistance, or shutdown information was supplied, those values must be confirmed in the manufacturer datasheet before final design release. Technically, this device belongs to the integrated-circuit amplifier family and more specifically to speaker-driver audio ICs. Its 3 x 3 mm QFN package supports high-density PCB layouts but demands careful control of exposed-pad soldering, copper thermal paths, and acoustic-mechanical layout. Class AB and Class D modes can also differ in EMI behavior and power efficiency, so mode selection should be based on the complete analog path, speaker impedance, and enclosure conditions rather than package size alone. Typical uses include portable-device speakers, compact consumer-audio products, personal-audio accessories, small embedded audio systems, and accessory modules requiring a mono 1 W drive stage. In these applications, the device can sit near the speaker connector to shorten the high-current output path, reduce load-related board losses, and simplify the analog architecture. Designers should still validate output power at the intended speaker impedance and frequency range. The primary design consideration is thermal management. Although the package includes an exposed pad, continuous Class AB output near the 1 W rating can dissipate more power than Class D operation. The pad should be connected to a suitable ground plane and thermal copper area, while input, feedback, and output routing should avoid the loudspeaker return path. Decoupling and output-filter values must come from the manufacturer application guidance. This product record consolidates verified distributor inventory, package information, source links, engineering caveats, and selection guidance that are not consolidated on a typical distributor listing. Where the supplied evidence does not establish a parameter or a true pin-compatible substitute, the record explicitly marks the gap rather than presenting an unsupported value.

RFQ Contact
WM9010ECSN/R - Class G Stereo Driver | Cirrus Logic
WM9010ECSN/R

WM9010ECSN/R - Class G Stereo Driver | Cirrus Logic

Cirrus Logic WM9010ECSN/R is a low-power, two-channel Class G stereo headphone-driver IC rated at 12 W in a 12-W-CSP package measuring 1.84 x 1.34 mm. The device supports a 16 ohm headphone load and achieves THD+N of -90 dB at 20 mW into 32 ohm with a 1.8 V supply. Its integrated charge pump generates split-rail voltage supplies for the ground-referenced headphone output stage. A Class G headphone amplifier is an audio amplifier architecture that combines signal-dependent output characteristics with efficient power delivery. Unlike a continuously biased linear output stage, Class G changes its internal supply behavior according to signal level and load demand. In a portable headset or portable media device, this approach helps reduce power consumed during quiet passages while retaining the output capability needed for louder playback. The WM9010ECSN/R belongs to the broader audio-amplifier IC and power-management semiconductor hierarchy. The WM9010ECSN/R provides a stereo output configuration, Class G efficiency, and an integrated charge pump in a compact surface-mount package. Its 12-lead CSP is only 1.84 x 1.34 x 0.7 mm, making it suitable for space-constrained portable equipment. A listed output-power figure of 34 mW applies to the characterized operating condition, while the distributor package classification identifies the device as a 12 W-class headphone driver. Headphone impedance and supply voltage remain important when evaluating available output power and distortion. Audio performance depends on the selected load and operating point. The manufacturer specification of THD+N at -90 dB, 20 mW output, 32 ohm load, and 1.8 V supply demonstrates low distortion at a practical portable-audio level. The integrated charge pump produces the positive and negative rail voltages needed by the ground-referenced headphone driver, reducing the number of external negative-supply components while adding charge-pump switching considerations to PCB layout. Typical applications include wired and wireless headphones, Bluetooth headset audio paths, portable game accessories, compact USB-C audio devices, and battery-powered music players. The small 12-W-CSP footprint supports dense layouts, while the 16 ohm load specification directly addresses conventional stereo-headphone impedances. In each application, the headphone source should be AC-coupled as required by the circuit design, and the power supply must remain within the device's specified operating limits. The most important design consideration is PCB implementation around a compact CSP with an integrated charge pump. Place input, output, supply, and decoupling connections according to the manufacturer layout guidance, keep the charge-pump and sensitive audio paths physically separated, and provide a quiet ground return. Confirm output-power capability at the actual supply voltage, channel load, and headphone impedance rather than relying only on the headline package classification. This product page combines the WM9010ECSN/R electrical characteristics, package data, drop-in-replacement review, application guidance, and design notes into a concise engineering reference. It is intended to accelerate schematic planning, footprint verification, and audio-path design without replacing the complete manufacturer datasheet.

RFQ Contact
WM9081GICN/V - 24-Bit Mono DAC with 2.6W Amplifier | Cirrus Logic
WM9081GICN/V

WM9081GICN/V - 24-Bit Mono DAC with 2.6W Amplifier | Cirrus Logic

The Cirrus Logic WM9081GICN/V is a mono 24-bit digital-to-analog converter with an integrated 2.6 W Class AB/Class D speaker amplifier, supplied in a 28-pin QFN package measuring 4 x 4 mm. It accepts I2S, DSP, LJ, and RJ digital audio data and is intended for space-constrained portable equipment where a single device must provide high-resolution digital-to-analog conversion and speaker drive. The operating voltage range is 1.71 V to 3.6 V, and the specified temperature range is -40 °C to +85 °C. An audio DAC converts digital audio samples into an analog voltage signal suitable for an audio amplifier or speaker driver. The WM9081GICN/V combines that conversion function with a programmable output stage and integrated mobile parametric equalization. Its fully programmable EQ coefficients allow speaker and enclosure characteristics to be optimized, while programmable dynamic-range control supports louder playback at low listening levels. The result is a compact audio signal-chain component that reduces the need for separate DAC and speaker-driver packages. The device supports 2-wire, 3-wire, 4-wire, and hardware control modes, with digital audio formats including LJ, RJ, I2S, and DSP. TDM support broadens its usefulness in multi-channel portable audio systems where several codec or converter functions share one digital bus. A thermal-shutdown interrupt provides a system-level indication that the integrated output stage has entered its protected operating condition. The manufacturer also identifies programmable gain as part of the device feature set. Typical applications include portable media players, mobile phones, compact personal audio systems, docking speakers, and other battery-powered products with an integrated single-speaker output. Placing the DAC and amplifier in one package reduces board area, external component count, and the number of signal connections between the digital audio source and the speaker. Design layouts should follow the manufacturer datasheet for decoupling, exposed-pad grounding, and analog output routing. Keep the digital interface traces away from the speaker output and amplifier supply nodes to reduce the chance of switching-edge coupling into the audio path. Confirm the configured control mode and digital format in firmware before enabling the output stage. This page organizes the WM9081GICN/V specifications, application guidance, package details, and sourcing information into a single engineering reference for compact mono audio output designs.

RFQ Contact
WM9082ECSN/R - 3W Mono PDM Class D Driver | Cirrus Logic
WM9082ECSN/R

WM9082ECSN/R - 3W Mono PDM Class D Driver | Cirrus Logic

The Cirrus Logic WM9082ECSN/R is a 3 W mono Class D speaker-driver IC with a PDM audio input, housed in a 9-ball W-CSP package measuring 1.57 mm by 1.47 mm. The device is intended for compact systems that receive digital audio directly from a PDM-compatible source, avoiding a separate analog audio input stage. Its Class D output architecture supports efficient speaker drive, while the small package supports space-constrained portable products. A Class D audio amplifier is a switching power amplifier that converts a digital or analog audio signal into a pulse-width-modulated output. The switching elements deliver energy to the speaker rather than dissipating the entire audio waveform as linear amplifiers do. A PDM input, also called pulse-density modulation, represents audio samples as a one-bit stream whose density changes over time. In the signal chain, the WM9082 belongs to the audio amplifier hierarchy and converts a PDM source into a mono Class D speaker output. The WM9082ECSN/R provides a single mono output channel and is identified as a 3 W Class D speaker driver. Its operating characteristics include PDM input support and automatic output enablement when PDM audio data is detected or when a valid Start-Up Control Code is received. These functions are useful in portable and embedded audio products because they allow the amplifier to remain inactive until valid audio activity is present, helping reduce unnecessary system activity. The compact 9-W-CSP construction is suitable for wearables, portable speakers, smart-home accessories, and compact consumer electronics where board area is limited. Because the package has a small thermal and electrical footprint, careful PCB layout is important. The speaker output, ground connection, PDM clock and data lines, supply connections, and any external filtering components should follow the manufacturer reference layout and recommended component values. This page emphasizes the distinctions that matter during schematic capture, PCB implementation, and sourcing. The WM9082 is most appropriate when the host processor or codec already supplies PDM audio and the system needs a compact mono speaker stage. It is less suitable for designs requiring conventional analog line input, multiple output channels, or a larger specified output-power level without reviewing the complete datasheet limits. The available listings also describe the device as a Cirrus Logic mono Class D audio amplifier, while the underlying datasheet identifies the original manufacturer as Wolfson Microelectronics. Use the manufacturer datasheet for the definitive electrical limits, recommended application circuit, pin description, exposed-ball configuration, and startup-code behavior. In particular, verify the allowed supply range, output-power conditions, speaker impedance, decoupling requirements, clocking limits, and PCB land pattern before release. The 1.57 mm by 1.47 mm package also makes assembly capability and land-pattern validation important during hardware planning. This page organizes the key WM9082ECSN/R specifications, sourcing information, application guidance, and replacement constraints in one place. It also distinguishes confirmed drop-in substitutions from broadly similar Class D drivers, helping engineers avoid choosing a device merely because its output wattage appears similar but whose package, pinout, input architecture, or control interface differs.

RFQ Contact
WM9094ECS/R - 2W Mono Class D/AB Amplifier | Cirrus Logic
WM9094ECS/R

WM9094ECS/R - 2W Mono Class D/AB Amplifier | Cirrus Logic

Cirrus Logic WM9094ECS/R is a 1-channel mono audio amplifier IC delivering up to 2 W into a 4-ohm load, with both Class D and Class AB operation in a 20-WCSP package measuring 2.53 mm by 2.07 mm. The device operates from a 2.7 V to 5.5 V supply and is intended for compact low-power audio systems. An audio amplifier is an integrated circuit that converts an input audio signal into sufficient output power to drive a loudspeaker or other transducer. Class AB amplifiers provide linear operation with comparatively continuous output current, while Class D amplifiers switch the output stage to improve power-conversion efficiency. The WM9094ECS/R supports both operating modes, giving designers flexibility according to their efficiency, distortion, and thermal requirements. Key features include Class D and Class AB output capability, a 2 W maximum output-power rating into 4 ohms, integrated depop circuitry, integrated thermal protection, and a surface-mount 20-WCSP package. The 2.7 V minimum supply voltage supports portable and space-constrained equipment, while the 5.5 V maximum supply voltage accommodates common low-voltage power rails. The WM9094ECS/R is identified as a mono, one-channel amplifier rather than a multi-channel power amplifier. Its compact 2.53 mm by 2.07 mm package can reduce board area in mobile accessories, personal-audio products, and other integrated audio equipment. The manufacturer and distributor listings identify it as an ultra-low-power audio subsystem and list the part as obsolete. Typical applications include compact speaker systems, portable audio accessories, and low-voltage embedded products where a single amplified channel is sufficient. System-level implementation must account for the 2.7 V to 5.5 V supply range, speaker impedance, output power, thermal conditions, and the small-area land-pattern requirements of the 20-WCSP package. The principal design consideration is the obsolete lifecycle status. Designers should verify availability, source quality, and long-term supply before committing to a new production design. For a new design with obsolete risk, engineers may need to qualify an alternative rather than assume that any Class D or Class AB amplifier is pin compatible. This page consolidates the verified distributor specifications, lifecycle information, package details, sourcing links, practical application guidance, and an explicit assessment of replacement availability. It also separates documented parameters from missing technical data instead of presenting unverified electrical characteristics as guaranteed specifications.

RFQ Contact