Products (44,000+)

WM9701CPT Stereo Audio Codec | Texas Instruments
WM9701CPT

WM9701CPT Stereo Audio Codec | Texas Instruments

The Texas Instruments WM9701CPT is a stereo audio codec with an integrated analog audio channel and digital audio interface, supplied in a 28-pin TQFP package. The verified distributor data identifies it as an Audio Special Purpose / Audio Channel device and lists an LCSC starting price of $0.6762. Its primary role is converting digital audio data into analog stereo signals while supporting audio-system signal conditioning and analog output control. The package designation CPT identifies a 28-pin TQFP-compatible physical format, but detailed electrical limits, supported sample rates, interface modes, analog performance, and pin functions are not present in the supplied verification records. A codec is an audio interface integrated circuit that combines digital-to-analog conversion, analog signal paths, and control or communication functions. In the broader semiconductor hierarchy, an audio codec belongs to an audio interface IC, then to an interface IC and a mixed-signal semiconductor. This integration can reduce the number of separate converters and support components in consumer audio, communications, and embedded systems. For the WM9701CPT, however, the supplied data does not establish whether its digital interface is I2C, I2S, or another format, nor does it quantify the number of supported channels. The verified records provide three useful procurement anchors: DigiKey Marketplace lists WM9701CPT for purchase and shipment, Octopart identifies availability and pricing across two distributors, and LCSC lists the part as in stock from $0.6762. A separate distributor listing describes the device as an analog consumer audio/video IC. These sources support commercial availability, but they do not provide manufacturer lifecycle status, operating temperature, supply voltage, clock requirements, DAC resolution, SNR, THD, output impedance, or pin-level mapping. WM9701CPT is best evaluated as a legacy or inventory-dependent audio codec rather than assumed to be a currently designed modern USB audio solution. Before schematic release, an engineer should obtain the original manufacturer datasheet and confirm the CPT land pattern, exposed-pad requirements, digital interface, analog routing, clocking, and firmware or register expectations. The part number alone is not enough to establish drop-in compatibility or modernization safety. Potential audio applications include legacy consumer-audio systems, portable media equipment, communications terminals, and embedded products that already target this codec family. Such uses remain conditional because the supplied data does not verify operating conditions or signal paths. Component selection should be based on a complete datasheet review rather than the distributor category label. The main engineering risk is assuming that similarly named stereo codecs are interchangeable. Digital-interface timing, register maps, analog routing, package dimensions, exposed-pad treatment, and software initialization can differ even when the functional description is similar. Validate the replacement against the original schematic and PCB footprint before committing to an alternative. This page consolidates the verified distributor listings, separates confirmed procurement facts from missing technical data, and avoids inventing specifications, pin assignments, or drop-in replacements. Obtain the authoritative datasheet before layout release or production substitution.

RFQ Contact
WM9707SCFT/V - Stereo AC'97 Audio Codec | Cirrus Logic
WM9707SCFT/V

WM9707SCFT/V - Stereo AC'97 Audio Codec | Cirrus Logic

The Cirrus Logic WM9707SCFT/V is a stereo AC'97 revision 2.1 audio interface codec with one ADC, one DAC, 18-bit serial audio resolution, and S/PDIF output in a 48-pin 7 x 7 mm TQFP package. It combines analog audio conversion with digital AC'97 audio connectivity for legacy computer, communications, and embedded audio systems. An audio codec is an interface IC that converts analog sound into digital samples and digital audio streams into analog signals. The WM9707SCFT/V belongs to the AC'97 audio codec category within interface ICs and broader semiconductor signal-processing devices. Its digital interface supports communication between an audio codec and a host controller, while its analog inputs and outputs handle microphones, line-level sources, headphones, or powered speakers through external circuitry. The WM9707SCFT/V provides stereo conversion through one ADC and one DAC, with an 18-bit serial format identified in the product listing. It also includes S/PDIF output, allowing digital audio to leave the codec over a standardized digital interface. The 48-pin TQFP package provides the mixed-signal, digital-interface, clock, and power connections required for a complete stereo codec implementation. AC'97 revision 2.1 support makes this device relevant to legacy PC audio architectures, industrial control panels, embedded systems, and communications equipment that already use the AC'97 bus. Designers should treat clocking, analog grounding, input and output coupling, and digital signal return paths as central design considerations. Because the AC'97 interface is a mature architecture, it is most appropriate for new designs when its electrical and software compatibility have been confirmed against the complete system requirements. Typical uses include stereo line-input processing, microphone conditioning through external analog circuits, multimedia playback, industrial operator consoles, and embedded equipment that accepts an AC'97-compatible codec. The S/PDIF output can feed a downstream digital audio receiver, while the analog DAC output supports conventional amplified playback when paired with suitable output circuitry. A successful implementation requires stable analog and digital supplies, correct master-clock and bit-clock relationships, input and output filtering, and careful separation of analog and return currents. The component also requires PCB space for decoupling and signal routing around a 48-pin mixed-signal package. Confirm the complete pin-description table and application circuit in the manufacturer datasheet before assigning nets or making a board revision. This product page consolidates the identified codec architecture, package details, sourcing information, comparison points, and practical integration guidance. It emphasizes the verified AC'97, ADC, DAC, resolution, S/PDIF, and package characteristics that determine whether the WM9707SCFT/V fits an existing audio system.

RFQ Contact
WPC8763LDG - Embedded Controller IC QFP-128 | Winbond
WPC8763LDG

WPC8763LDG - Embedded Controller IC QFP-128 | Winbond

The Winbond Electronics WPC8763LDG is a specialized embedded controller (EC) integrated circuit supplied in a 128-pin QFP surface-mount package, designed primarily for notebook PC and mobile-system platform management applications such as keyboard scanning, power sequencing supervision, and thermal/fan control. An embedded controller is a specialized microcontroller that operates semi-independently of the host CPU to manage low-level platform functions. In the PC system hierarchy, the EC sits below the main CPU and chipset (PCH) as a power-management IC tier: it handles keyboard matrix scanning, battery charging supervision, thermal monitoring, fan speed control, and lid/power-button events, typically following Intel or AMD platform EC firmware specifications such as those used with ACPI and eSPI/KBC interfaces. The WPC8763LDG belongs to Winbond's WPC876x family of embedded controllers, which integrates an 8-bit or proprietary MCU core with on-chip flash/ROM program memory, keyboard controller (KBC) logic, GPIO, PWM channels for fan control, and ADC inputs for thermal and voltage monitoring. Key differentiating features of this family include the high GPIO count required for notebook keyboard matrices, integrated PWM fan controllers that reduce external component count, and low standby power consumption for battery-operated systems. The 128-pin QFP package provides sufficient I/O for a full notebook EC implementation on a single chip. Architecturally, EC devices like the WPC8763LDG combine a low-power MCU core, a shared RAM region, dedicated peripheral blocks (PS/2 keyboard interface, SMBus/I2C masters for battery and thermal IC communication, pulse-width modulators, and watchdog timers), and boot ROM. Firmware executes from internal non-volatile memory, and the EC communicates with the chipset over LPC or eSPI buses depending on platform generation. Typical applications include laptop and notebook motherboard EC functions, keyboard/mouse controller emulation (PS/2 KBC/Mouse), battery charging management in coordination with a charger IC, thermal and acoustic (fan) management, and general-purpose GPIO expansion in portable and industrial embedded systems. A key design consideration is firmware compatibility: the EC must run BIOS-coordinated firmware, so replacing this device requires both hardware pin compatibility and firmware/toolchain support - verify code image compatibility before any substitution. This page synthesizes distributor stock and pricing data, package information, and sourcing guidance not consolidated in the manufacturer's public datasheet listing.

RFQ Contact
WT:A - Micron 48Gb LPDDR4 SDRAM Mobile Memory | Micron
WT:A

WT:A - Micron 48Gb LPDDR4 SDRAM Mobile Memory | Micron

Micron Technology MT53E1536M32D4DT-046 WT:A is a 48 Gbit Mobile LPDDR4 SDRAM memory IC in the MT53E family, rated at 2.133 GHz and supplied in a 200-ball TFBGA. According to DigiKey listing data retrieved on 2026-10-09, the part is a Mobile LPDDR4 device intended for high-density, low-power system designs that require the bandwidth of LPDDR4 with the smallest possible PCB footprint. What is an LPDDR4 SDRAM? LPDDR4 (Low-Power Double Data Rate 4) is a JEDEC-standardized volatile memory category optimized for mobile and power-constrained applications. Compared with LPDDR3 and DDR3/DDR4, LPDDR4 uses a low-swing I/O interface (V<sub>DDQ</sub> typically 1.1 V), 2n-prefetch architecture, and deep power-down modes, positioning it within the broader mobile memory hierarchy: LPDDR4 -> SDRAM -> volatile memory -> memory IC -> semiconductor. LPDDR4 is the memory type used in virtually every high-end smartphone application processor, and is increasingly adopted in automotive infotainment, edge AI, and ultra-thin notebooks. Key features of this 48 Gbit MT53E1536M32D4DT-046 WT:A device include a 1536M x 32-bit logical organization, 2.133 GHz data rate per the -046 speed-bin suffix, and operation from a low-voltage core rail to maximize battery life. The 200-ball TFBGA package is thin-profile and thermally efficient, suiting space-limited mobile platforms. The device supports the standard LPDDR4 command set including multi-channel operation, low-power states (IDD2N, IDD3P, IDD6), and on-die temperature sensing. The architecture follows Micron's 1y-nm-class mobile DRAM process, enabling a high-density 48 Gbit monolithic die. Combined with the -046 speed grade, this delivers the throughput needed for multi-camera image pipelines, 4K video encode/decode buffers, and large neural network inference workloads running on the application processor. The wide 32-bit datapath keeps channel-count low, simplifying PCB routing on highly integrated SoCs. Typical applications include flagship smartphone application processors, ultra-thin notebook main memory, automotive infotainment platforms, edge AI inference accelerators, AR/VR headset compute modules, and embedded single-board computer platforms. The wide temperature support and small form factor make it attractive in any design that demands high memory density with low standby power. When designing with the MT53E1536M32D4DT-046 WT:A, ensure the host SoC's LPDDR4 PHY matches the 2.133 GHz speed bin to avoid down-training. Decoupling and PCB stack-up should follow the Micron LPDDR4 design guide, with controlled-impedance routing for the CA and DQ byte lanes and matched lengths within each byte group. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a one-line distributor listing.

RFQ Contact
X9313UST1 - 50kΩ 32-Tap Digital Potentiometer SOIC-8 | Renesas
X9313UST1

X9313UST1 - 50kΩ 32-Tap Digital Potentiometer SOIC-8 | Renesas

The Renesas X9313UST1 is a digitally controlled potentiometer (XDCP™) housed in an 8-pin SOIC package with a fixed end-to-end resistance of 50 kΩ and 32 resistive taps. It provides a single-channel, non-volatile, up/down wiper interface through three logic input pins (U/D, INC, CS) and stores the last wiper position through on-chip nonvolatile memory that retains setting across power cycles. The 32-tap resolution gives approximately 1.0% per-step resolution across the resistor array. Background context: a digital potentiometer (often abbreviated "digi-pot") is a solid-state, semiconductor replacement for a mechanical potentiometer or trim pot. Digi-pots sit within the broader data-acquisition and analog-signal-conditioning hierarchy, alongside DACs and digital rheostats, and they belong to the Renesas XDCP™ family. Unlike mechanical pots, they are programmable by host firmware, never wear from mechanical actuation, and ship in surface-mount packages suitable for reflow soldering and dense PCB layouts. Key features include a low 1 mA (typical) standby current, terminal voltages up to ±5 V across the resistor array, a 1.0% end-to-end resistance tolerance, and a wiper current rating up to approximately ±1 mA continuous, with peak surge handling to 10 mA. The 3-wire serial interface consumes only three MCU GPIO pins and is compatible with 5 V logic. The internal architecture pairs a polysilicon resistor array with CMOS wiper switches and a non-volatile memory cell that latches the last wiper position before power-down. Three control inputs (CS, INC, U/D) implement a step-and-direction interface: CS enables the chip, INC clocks each tap step, and U/D selects up or down direction. Power-on recall places the wiper on the stored value with deterministic behavior. Typical applications are audio volume/balance control, LCD contrast/brightness trimming, programmable voltage references, sensor calibration, and parameter-set storage where an MCU must hold a setting through power-down. Because the wiper retains state without external EEPROM, designers can eliminate a serial EEPROM and reduce BOM cost in many calibration circuits. When designing with the X9313UST1, respect the maximum terminal voltage (±5 V across the resistor terminals) and verify that pin 8 is correctly identified in PCB layout - the part is widely second-sourced and a small number of look-alike 8-pin digi-pots swap the GND and VL pin positions. Add a 0.1 µF decoupling capacitor close to the supply pin and confirm that CS is not allowed to float. This page combines the Renesas datasheet specifications, current distributor pricing, pin-compatible cross references, and practical layout notes not always covered in the original datasheet, providing engineers a single-page engineering brief for the X9313UST1.

RFQ Contact
XA2S200E-6FT256I - 200K Gate FPGA | AMD | 256-FTBGA
XA2S200E-6FT256I

XA2S200E-6FT256I - 200K Gate FPGA | AMD | 256-FTBGA

The AMD XA2S200E-6FT256I is a member of the Spartan-IIE XA family of Field Programmable Gate Arrays (FPGAs), designed for automotive and industrial applications requiring high performance, abundant logic resources, and a rich feature set at a low cost. This device provides 200,000 system gates, 5,292 logic cells, and 1,176 Configurable Logic Blocks (CLBs), operating from a nominal 1.8V supply. It is housed in a 256-ball FTBGA (17x17 mm) package with 182 user I/O pins. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing—hence "field-programmable." FPGAs are part of the broader programmable logic device (PLD) family, which sits above ASICs in flexibility but below them in unit cost at high volume. The Spartan-IIE family is a superior alternative to mask-programmed ASICs, avoiding the initial cost, lengthy development cycles, and inherent risk of conventional ASICs. FPGA programmability permits design upgrades in the field with no hardware replacement necessary. Key features of the XA2S200E-6FT256I include 57,344 total RAM bits, support for 1.71V to 1.89V supply voltage, and a -40°C to 100°C junction temperature range. The device uses a 0.15-micron CMOS process and supports I/O standards including LVCMOS, LVTTL, and HSTL. The -6 speed grade indicates a maximum internal clock frequency of approximately 200 MHz, suitable for moderate-speed control and data processing tasks. Technically, the Spartan-IIE architecture combines a configurable logic fabric with block RAM and dedicated routing resources. The 256-ball FTBGA package provides excellent thermal and electrical performance, with a compact 17x17 mm footprint. The device is lead-free and RoHS compliant, meeting modern environmental standards. Typical applications include automotive infotainment, motor control, industrial networking, and test equipment. The 182 I/O pins allow flexible interfacing with sensors, ADCs, and communication transceivers. The wide temperature range and automotive qualification make it suitable for under-hood and harsh-environment deployments. When designing with this FPGA, ensure adequate decoupling on the 1.8V core supply and separate I/O supply rails. The device is now obsolete (EOL), so plan for last-time buy or consider pin-compatible alternatives for new designs.

RFQ Contact
XA3S1000-4FTG256Q - 1M Gate Automotive FPGA | AMD Xilinx
XA3S1000-4FTG256Q

XA3S1000-4FTG256Q - 1M Gate Automotive FPGA | AMD Xilinx

The AMD Xilinx XA3S1000-4FTG256Q is an automotive-grade Field Programmable Gate Array (FPGA) from the Spartan-3 XA family, designed for high-volume, cost-sensitive automotive electronic applications. It delivers 1,000,000 system gates, 17,280 logic cells, and 442,368 total RAM bits in a 256-ball FTBGA package. This device operates with a nominal supply voltage of 1.2V (range 1.14V to 1.26V) and supports 173 user I/O pins, making it suitable for a wide range of automotive control and interface tasks. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing. Unlike fixed-function ASICs, FPGAs contain an array of programmable logic blocks and a hierarchy of reconfigurable interconnects that allow the hardware to be reprogrammed to perform any digital logic function. The Spartan-3 XA family is specifically optimized for automotive applications, meeting the rigorous AEC-Q100 qualification standard for reliability across extended temperature ranges (-40°C to +125°C). Key features of the XA3S1000-4FTG256Q include its automotive qualification (AEC-Q100), 173 user I/O pins, 1920 Configurable Logic Blocks (CLBs), and 442,368 total RAM bits. The device is built on 90nm technology and supports a maximum operating frequency of 125MHz. The FTG256 package (256-ball FTBGA) provides a compact footprint suitable for space-constrained automotive PCBs while offering adequate thermal performance for the device's power dissipation. From a technical architecture perspective, the Spartan-3 XA family uses a 90nm process technology with a 1.2V core voltage, enabling low power consumption while maintaining high logic density. The device includes dedicated multipliers, block RAM, and digital clock managers (DCMs) that support complex digital designs. The automotive-grade variant ensures operation across the full -40°C to +125°C temperature range, making it reliable for under-hood and in-cabin automotive electronics. Typical applications include automotive infotainment systems, engine control units (ECUs), advanced driver-assistance systems (ADAS), and industrial motor control. The device's 173 I/O pins and 1M gate capacity make it ideal for glue logic, sensor interfacing, and display control in automotive environments. When designing with this device, ensure proper power supply decoupling with 0.1uF and 10uF capacitors placed close to the VCC pins. The 1.2V core supply must be clean and stable; consider using a dedicated LDO or DC-DC converter with adequate ripple rejection to maintain reliable FPGA operation.

RFQ Contact
XA3S200-4PQG208I - Automotive Spartan-3 FPGA | AMD
XA3S200-4PQG208I

XA3S200-4PQG208I - Automotive Spartan-3 FPGA | AMD

AMD XA3S200-4PQG208I is an automotive-grade Spartan-3 XA field-programmable gate array with 200,000 system gates, 4,320 logic cells, 141 I/O, and a 208-pin PQFP package. The I-grade device supports an industrial junction-temperature range of -40°C to +100°C and is qualified to AEC-Q100. It combines programmable logic, block RAM, dedicated digital signal processing resources, and selectable I/O performance in a single FPGA package. An FPGA is a user-programmable semiconductor in the broader hierarchy of programmable logic devices, semiconductors, and digital integrated circuits. Unlike a fixed-function logic IC, an FPGA allows designers to implement parallel processing, control logic, interfaces, and signal-processing functions through a configurable digital architecture. The Spartan-3 family targets cost-sensitive designs requiring moderate logic density, flexible I/O, and integrated memory rather than the very high resource counts of a high-end FPGA. Key features include 4,320 logic cells, 141 available I/O, and support for seventeen single-ended I/O standards. The device also supports seven differential signal standards, including LVDS, and provides digitally controlled impedance termination. These resources allow one programmable device to consolidate multiple board functions while supporting common high-speed interfaces. The listed 622 Mb/s data-transfer rate per I/O indicates the performance class available when suitable standards and board implementations are used. The XA3S200-4PQG208I uses a 90 nm Spartan-3 FPGA architecture and is positioned for automotive electronic systems requiring higher reliability than conventional commercial devices. Its AEC-Q100 qualification and extended-temperature availability are important when the FPGA controls a safety-relevant or mission-critical function. Configuration data determines the implemented logic, so board-level programming, device handling, and verification practices remain essential parts of the design process. Typical applications include automotive body and chassis electronics, vehicle communication modules, engine or transmission control systems, industrial automation equipment, and compact embedded control platforms. The combination of 4,320 logic cells, 141 I/O, integrated block RAM, and mixed I/O standards is especially useful for controllers that collect sensor inputs, execute control algorithms, and communicate with external networks. PCB design should preserve the package footprint, power and ground distribution, decoupling requirements, configuration interface, and supported I/O standards of the Spartan-3 XA family. Differential pairs require controlled impedance and careful return-path planning. Designers should also account for the stated operating-temperature grade and verify the selected configuration method, system clocking, memory interfaces, and unused-pin treatment in the manufacturer documentation. This product page consolidates the exact package, logic-resource, I/O, temperature-grade, compliance, and interface information for XA3S200-4PQG208I. It also provides application guidance, package-oriented comparison details, and practical design notes to help engineers evaluate FPGA integration before requesting a quote.

RFQ Contact
XA3S200-4PQG208Q - 200K Automotive Spartan-3 FPGA | Xilinx
XA3S200-4PQG208Q

XA3S200-4PQG208Q - 200K Automotive Spartan-3 FPGA | Xilinx

The Xilinx XA3S200-4PQG208Q is an automotive Spartan-3 XA field-programmable gate array with 200,000 equivalent gates, 4,320 logic cells, 480 configurable logic blocks, and 141 user I/O pins. It is manufactured in 90 nm technology, operates from a 1.14 V to 1.26 V core supply, and is housed in a 208-pin PQFP surface-mount package. The device includes 221,184 bits of block RAM for configurable digital logic and signal-processing designs. A field-programmable gate array, or FPGA, is a programmable digital semiconductor containing configurable logic blocks, programmable interconnect, and input/output resources. Its hierarchy extends from an FPGA to a programmable logic device, then to a digital semiconductor and general-purpose integrated circuit. FPGAs are selected when design flexibility, parallel processing, hardware acceleration, or field updates are more valuable than the lower unit cost and predictable power of a fixed logic ASIC. The XA3S200-4PQG208Q provides 200,000 system gates, 4,320 logic elements, and 221,184 RAM bits in a single package. Its 141 user I/O pins support external interfaces and system connections, while the 90 nm process and 1.2 V nominal core voltage identify it as a Spartan-3 XA architecture. The automotive temperature grade and AEC-Q100 qualification distinguish this Q-suffix device for demanding automotive applications. The Spartan-3 XA architecture combines configurable logic, block RAM, dedicated digital signal-processing resources, and programmable I/O standards. A maximum clock frequency of 125 MHz is listed for the XA3S200 family, providing a useful performance reference for control, communication, sensor-processing, and embedded systems designs. Exact timing must be evaluated against the device-specific speed grade and the manufacturer datasheet before system timing closure. Typical uses include automotive body and chassis control, sensor conditioning, motor control, infotainment interfaces, gateway logic, and distributed electronic control units. The 141 I/O count and 221,184 RAM bits allow multiple external buses and parallel data paths to be implemented without adding a separate processor when the required logic fits within the FPGA resource limits. Use the manufacturer pin description table when assigning power, ground, configuration, clock, and user I/O connections. The automotive system should also account for the extended temperature grade, decoupling requirements, configuration startup behavior, signal-integrity rules, and AEC-Q100 qualification constraints listed for the device. This page consolidates the available XA3S200-4PQG208Q specifications, same-package alternatives, application guidance, comparison parameters, and practical design notes into an engineering-focused reference for FPGA designers, automotive electronics developers, and component sourcing teams.

RFQ Contact
XA3S200-4TQG144I - 4320-Logic-Cell Spartan-3 XA FPGA | AMD
XA3S200-4TQG144I

XA3S200-4TQG144I - 4320-Logic-Cell Spartan-3 XA FPGA | AMD

AMD XA3S200-4TQG144I is a Spartan-3 XA field-programmable gate array with 4,320 logic elements, 200,000 system gates, 216 kbit of embedded memory, and 97 user I/O in a 144-LQFP package. Designed for industrial-temperature programmable-logic applications, it combines configurable digital logic, embedded block RAM, and programmable I/O in a surface-mount package. The device operates from a 1.2 V core supply and supports I/O data rates up to 622 Mb/s per I/O. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, memory, and I/O can be configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, where it complements ASICs, microcontrollers, and DSP processors. Its parallel configurable resources allow multiple digital functions to be consolidated into one device, reducing component count while shortening development cycles for prototype and production systems. The XA3S200-4TQG144I provides 4,320 logic elements organized as 1,920 adaptive logic modules. Its 216 kbit of embedded block RAM supports data buffers, packet storage, lookup tables, and small local memories without external memory. The 97 available I/O give designers access to interfaces for control, communications, instrumentation, industrial control, embedded processing, and general-purpose digital interfaces. Its 144-LQFP package provides a standard gull-wing surface-mount footprint with 144 terminals. The Spartan-3 XA family targets automotive and industrial programmable-logic requirements while retaining the familiar Spartan-3 architecture. Its integrated I/O resources support seventeen single-ended signal standards, seven differential standards including LVDS, and digitally controlled impedance termination. These features are useful when a board must interface reliably to external logic, communications transceivers, sensors, or memory across varying signal-loading conditions. Typical designs include industrial controllers, data-acquisition systems, embedded communications gateways, video-processing pipelines, automotive electronic modules, and general embedded control platforms. The FPGA is particularly useful when parallel architecture, deterministic timing, configurable I/O, and field-updatable logic are more valuable than the low power and simplicity of a fixed-function microcontroller. Designers should use the AMD Spartan-3 XA product specification, pinout tables, and configuration guidance when assigning pins and selecting I/O standards. Validate signal-integrity and power-integrity requirements across temperature, voltage, and process corners, and confirm that board-level memory, clocking, configuration, and programming interfaces support the intended system architecture. This product summary combines package, resource, interface, comparison, and design information to simplify initial component selection while directing engineers to the authoritative AMD documentation for implementation details.

RFQ Contact
XA3S200-4TQG144Q - 200K Gate Automotive FPGA | AMD
XA3S200-4TQG144Q

XA3S200-4TQG144Q - 200K Gate Automotive FPGA | AMD

The AMD XA3S200-4TQG144Q is an automotive Spartan-3 XA field-programmable gate array with 200,000 system gates, 4,320 configurable logic elements, 221,184 bits of block RAM, and 97 configurable I/O in a 144-pin LQFP package. The device operates from a 1.2 V core supply, with a stated operating range of 1.14 V to 1.26 V. It is positioned for cost-sensitive automotive electronics requiring programmable logic, automotive qualification, and a compact surface-mount footprint. A field-programmable gate array is a semiconductor whose digital logic and interconnect are configured after manufacture. An FPGA sits within the programmable-logic hierarchy, combining configurable logic blocks, block RAM, programmable I/O, and dedicated arithmetic resources. This architecture allows automotive designers to consolidate control logic, interface adaptation, data acquisition, and protocol handling into one device while retaining field-update flexibility. The Spartan-3 XA implementation provides 4,320 logic elements organized as 1,920 adaptive logic modules, along with 221,184 bits of RAM. Published device information identifies 97 configurable I/O and a maximum data transfer rate of 622 Mb/s per I/O. The device supports seventeen single-ended and seven differential signal standards, including LVDS, and uses digitally controlled impedance for board-level signal control. These features make it useful where multiple logic functions and external interfaces would otherwise require several discrete devices. The XA3S200 family combines a 90 nm fabrication process with dedicated 18×18 multipliers and a 1.2 V core architecture. These resources support parallel data processing, sensor conditioning, display control, vehicle-network adaptation, and embedded control functions. Programming and configuration are managed through the Spartan-3 family programming interface, while the automotive suffix identifies the vehicle-oriented qualification grade. Typical automotive uses include body and comfort control modules, infotainment interface logic, central gateway adaptation, sensor aggregation, diagnostic circuitry, and industrial vehicle controls. The 144-pin gull-wing package supports conventional PCB assembly, while the combination of programmable logic, block RAM, multipliers, and differential I/O reduces component count in systems requiring several digital functions. Designers should preserve the device’s specified supply tolerance and provide appropriate decoupling for both core and I/O supplies. Configuration storage, startup sequencing, clocking, and automotive transient requirements must be reviewed in the manufacturer datasheet. PCB layout should also account for high-speed I/O, LVDS pairs, impedance control, and thermal performance rather than treating the package as a generic low-speed TQFP. This product page combines device specifications, package and sourcing details, qualified same-family drop-in alternatives, and practical guidance for automotive FPGA design. It also distinguishes verified electrical characteristics from parameters that require confirmation from the complete manufacturer datasheet before schematic release or production use.

RFQ Contact
XA3S50-4PQG208I - 50K-Gate Automotive Spartan-3A FPGA | Xilinx
XA3S50-4PQG208I

XA3S50-4PQG208I - 50K-Gate Automotive Spartan-3A FPGA | Xilinx

The Xilinx XA3S50-4PQG208I is an automotive Spartan-3A field-programmable gate array with 50,000 system gates, 1,728 logic elements, 124 user I/O, and 73,728 RAM bits in a 208-pin PQFP package. It operates from a 1.2 V core supply with 3.3 V I/O, uses 90 nm FPGA technology, and supports data rates up to 622 Mb/s per I/O. An FPGA is a programmable digital-logic device whose lookup tables, flip-flops, routing, block RAM, and I/O blocks are configured after manufacture. Within the semiconductor hierarchy, the XA3S50-4PQG208I is an FPGA and programmable-logic device. It sits between fixed-function logic and larger application-specific programmable arrays, allowing automotive and industrial designs to implement parallel processing, control, communication, and interface logic on one device. The device provides 192 configurable logic blocks, 124 user I/O, 73,728 RAM bits, and support for 17 single-ended and seven differential I/O standards, including LVDS. Digitally controlled termination supports signal-integrity control on suitable interfaces. The -4 speed designation identifies the device performance grade, while the I suffix identifies the supplied industrial-temperature configuration for demanding automotive and embedded environments. The Spartan-3A XA architecture combines programmable logic resources with automotive-oriented product construction. A 90 nm process supports a compact, cost-sensitive implementation, while the 208-pin PQFP exposes more I/O than smaller FPGA packages. The 1.2 V core and 3.3 V I/O arrangement separates the low-voltage internal logic supply from the higher-voltage external interface supply, allowing I/O standards to be selected according to board-level requirements. Typical uses include automotive body and chassis control modules, sensor aggregation, actuator control, gateway and communication logic, industrial automation controllers, and low-cost embedded signal-processing systems. The 124 I/O make the device useful for parallel sensor, control, communications, and debug interfaces, while 73,728 RAM bits support buffering, packet handling, and stateful control functions. Designers should verify the complete PQFP-208 footprint, pin assignments, supported I/O standards, configuration interface, clocking, power sequencing, and decoupling against the manufacturer datasheet. Because automotive qualification and deployment depend on the complete product qualification record, engineers must also validate the applicable certification evidence for their specific production program. This page combines the verified device specifications with practical selection guidance, sourcing context, package limitations, and clearly qualified replacement analysis. It distinguishes confirmed pin-compatible same-family options from unsupported cross-brand substitutions, helping engineers avoid assuming that a shared package alone guarantees a drop-in replacement.

RFQ Contact
XA3S50-4PQG208Q - 125 MHz Spartan-3 XA FPGA | AMD
XA3S50-4PQG208Q

XA3S50-4PQG208Q - 125 MHz Spartan-3 XA FPGA | AMD

The AMD XA3S50-4PQG208Q is a Spartan-3 XA field-programmable gate array with 50,000 system gates, 192 configurable logic blocks, 1,728 logic cells, and a maximum operating frequency of 125 MHz. The device provides 124 user I/O pins in a 208-pin PQFP package and operates from a 1.2 V supply. A field-programmable gate array is a semiconductor whose digital logic, memory, and I/O behavior are defined after manufacture through a configuration bitstream. Within the product hierarchy, the XA3S50-4PQG208Q is a Spartan-3 XA FPGA, combining configurable logic blocks, block RAM, programmable I/O standards, and dedicated configuration resources on one integrated device. This makes it useful when a fixed logic design must be updated without replacing the PCB. Key features include support for 17 single-ended I/O standards and seven differential standards, including LVDS. The advance product specification lists a maximum data-transfer rate of 622 Mb/s per I/O. Digitally controlled on-chip termination is also identified in the supplied specification data, helping reduce external termination components on suitable high-speed interfaces. The -4 speed designation corresponds to the verified 125 MHz maximum operating frequency. The device includes 73,728 bits of RAM, providing dedicated storage alongside the 1,728 logic cells. Its 124 user I/O pins provide substantial connectivity for control logic, data acquisition, communications, and general-purpose embedded processing. As an AEC-Q100-qualified automotive FPGA, it supports designs requiring a qualified programmable logic platform rather than a fixed-function controller. Typical uses include automotive body and chassis electronics, industrial control modules, data-acquisition equipment, communication gateways, and embedded control systems. The combination of 125 MHz operation, 124 I/O, 73,728 RAM bits, and broad I/O-standard support suits designs that interface multiple external signal domains while retaining field-updatable configuration. Designers should verify every voltage bank, I/O standard, clocking requirement, configuration interface, and power-budget assumption against the manufacturer datasheet before layout release. Because the supplied data does not provide a complete pin table, this page does not publish an inferred 208-pin mapping; use the manufacturer documentation for board-level implementation. This page consolidates verified distributor specifications, automotive qualification information, sourcing data, and selection guidance. It also distinguishes available same-family alternatives by package and qualification, while explicitly identifying missing technical details instead of estimating unpublished pinout, timing, or power values.

RFQ Contact
XA6SLX4-2CSG225I - 3840-Cell Automotive Spartan-6 FPGA
XA6SLX4-2CSG225I

XA6SLX4-2CSG225I - 3840-Cell Automotive Spartan-6 FPGA

The AMD XA6SLX4-2CSG225I is an automotive Spartan-6 LX XA field-programmable gate array with 3,840 logic cells, 132 user I/O, and a 225-ball CSBGA package. Designed for high-volume automotive applications, this 45 nm CMOS FPGA combines programmable logic, block RAM, and digital signal processing resources in a single integrated circuit. Its 1.2 V core voltage and automotive screening position it for embedded automotive control, vehicle networking, infotainment, sensor acquisition, and safety-oriented electronic systems. An FPGA is a programmable-logic semiconductor whose internal digital blocks can be configured after manufacture to implement counters, state machines, interfaces, signal processors, and control functions. In the product hierarchy, the XA6SLX4 belongs to the Spartan-6 LX family, which is a cost-optimized FPGA series for embedded and high-volume applications. Its 225-ball surface-mount package supports dense PCB integration while retaining a broad selection of programmable resources for parallel interface, control, and data-processing tasks. The XA6SLX4-2CSG225I provides 3,840 logic cells, 132 I/O, and 221,184 indicated logic resources in its published ordering description. Its 225-CSBGA package supports compact board layouts, while the 45 nm CMOS process provides the basis for an economical balance of capability, power, and cost. The XA prefix identifies the automotive Spartan-6 LX family, which is screened for automotive applications and includes AEC-Q100-qualified variants in the family. The -2 speed designation identifies the device performance grade used for timing-oriented design decisions. Engineers should use the complete Spartan-6 LX data sheet, configuration guidance, and package information when setting timing constraints, selecting I/O standards, and defining power budgets. The -2 grade is distinct from faster or slower ordering codes, so replacing it with another grade can affect timing margin even when the package and logic resources are identical. Typical automotive uses include body and chassis control, engine or transmission supervisory logic, vehicle bus gateways, sensor fusion, camera and radar interfaces, diagnostic systems, and centralized electronic control units. The 132 I/O count is particularly useful for systems that need substantial parallel connectivity alongside configurable logic. Suitable designs also require a compatible configuration solution, power sequencing, clocking, and automotive qualification of the complete electronic assembly. For layout, follow the manufacturer's ball map and BGA escape-routing guidance for the 225-CSBGA package. Keep power and ground distribution robust across the array, preserve the recommended decoupling structure, and route high-speed interfaces with controlled impedance. Review I/O drive strength, slew rate, and voltage tolerances against the attached automotive signals before finalizing the board design. This product page combines package, logic-resource, technology, compliance, and ordering-code details with application guidance, comparison criteria, and practical design notes. It also identifies same-footprint alternatives that require careful qualification review, particularly where automotive temperature grading or FPGA speed grade differs from the original device.

RFQ Contact
XA7A100T-1FGG484Q - Automotive Artix-7 FPGA, 101K LE, 484-FCBGA | AMD
XA7A100T-1FGG484Q

XA7A100T-1FGG484Q - Automotive Artix-7 FPGA, 101K LE, 484-FCBGA | AMD

The AMD XA7A100T-1FGG484Q is an automotive-qualified Artix-7 XA Field-Programmable Gate Array (FPGA) with 101,440 logic cells, 4,976,640 system gates, and 4.75 Mbit of block RAM, housed in a 484-ball Fine-Pitch Chip-Scale BGA (FCBGA / FGG484) package. It integrates 15850 Adaptive Logic Modules (ALMs) and 285 user I/Os, supporting up to 4 transceivers at 6.25 Gb/s for high-speed serial links. An FPGA (Field-Programmable Gate Array) is a reconfigurable integrated circuit containing an array of programmable logic blocks, interconnect fabric, and dedicated silicon blocks (DSP, BRAM, transceivers, clock management) that designers program via HDL to implement custom digital logic, DSP pipelines, or interface bridges. FPGAs sit within the broader semiconductor hierarchy: programmable logic device -> logic IC -> integrated circuit -> semiconductor. The Artix-7 XA sub-family is AMD's automotive-temp (-40C to +125C) extension of the cost-optimized Artix-7 line, targeting AEC-Q100 Grade 2 qualified designs. Key features include 28 nm TSMC HPL process technology, 1.0 V core voltage (0.95 V Vccint option), support for DDR3-1066 memory interfaces, integrated PCIe Gen2 hard cores, and dedicated DSP48E1 slices for high-throughput arithmetic. The XA family adds automotive-grade qualification and extended temperature operation beyond the commercial XC7A100T. Architecturally, the device uses a 6-input LUT-based ALM fabric fed by a hierarchy of regional, horizontal, and clock backbone routing. 240 DSP48E1 slices deliver up to 528 GMACs of fixed or floating-point throughput at 28 nm, and integrated GTX transceivers support CPRI, 7-Series PCIe Gen2, and SRIO protocols up to 6.25 Gb/s. Typical applications include automotive driver-assistance (ADAS) sensor fusion, in-vehicle networking bridges (CAN/Ethernet/LIN), body-electronics controllers, infotainment video preprocessing, and industrial machine-vision pipelines. The XA prefix signals compliance with ISO 26262-relevant automotive design flows when used with the Vivado Design Suite. When designing with the XA7A100T-1FGG484Q, plan thermal dissipation for the 484-FCBGA (theta_JA around 14 C/W with proper airflow) and follow AMD UG475 pinout guidelines to avoid signal-integrity issues on GTX transceiver lanes. Use IBIS models and Vivado's power estimation before tape-out. This page synthesizes distributor pricing, drop-in pin-compatible alternatives from the same Artix-7 XA family, and practical design notes not found in the manufacturer datasheet alone.

RFQ Contact
XA7A12T-1CPG238I - Automotive Artix-7 FPGA | AMD
XA7A12T-1CPG238I

XA7A12T-1CPG238I - Automotive Artix-7 FPGA | AMD

The AMD XA7A12T-1CPG238I is an automotive-qualified Artix-7 XA Field Programmable Gate Array (FPGA) with 12,800 logic cells, 737,280 bits of block RAM, and 112 user configurable I/O pins. It is supplied in a 238-ball LFBGA/CSPBGA (CSBGA-238) package with a -1 speed grade and is designed for cost-sensitive automotive and industrial applications where low power, small footprint, and reprogrammable hardware logic are essential. An FPGA (Field Programmable Gate Array) is a semiconductor device containing a matrix of configurable logic blocks connected through programmable interconnects; the array can be reprogrammed in the field to implement user-defined digital logic circuits. FPGAs sit between fixed-function ASICs and software processors in the digital system hierarchy, giving engineers the ability to iterate hardware designs without silicon respin. The Artix-7 XA family is specifically screened for automotive quality, bringing FPGA flexibility to vehicle systems. Key features of the XA7A12T-1CPG238I include 12,800 logic elements, 737,280 total block RAM bits, and 112 user I/O in a compact 238-ball CSPBGA. The -1 speed grade offers an entry-level performance point that minimizes cost and power while supporting moderate clock rates for control, interface, and image-processing tasks. The device is RoHS compliant per LCSC listing, and the XA prefix indicates automotive-grade screening. Architecturally, Artix-7 devices integrate a high-performance programmable logic fabric, embedded block RAM, and DSP slices for arithmetic operations. The 737,280-bit block RAM supports distributed FIFOs and line buffers, while the flexible I/O cells connect to a wide range of single-ended and differential signalling standards. These capabilities enable deterministic hardware processing in ADAS, motor control, display bridging, and industrial logic applications. Typical applications include automotive ADAS sensor fusion, electric pump and fan motor control, industrial machine vision, in-vehicle display bridges, battery management safety logic, and UAV flight controllers. The 112 I/O and automotive qualification make the XA7A12T suitable for replacing multiple discrete logic and microcontroller tasks with one programmable device. When designing with the XA7A12T-1CPG238I, pay careful attention to multi-rail power sequencing requirements and the exact CPG238 pinout file. Multiple supply rails, BGA decoupling, and configuration flash selection are critical for first-pass success.

RFQ Contact
XA7A12T-1CPG238Q - 112-I/O Artix-7 FPGA | AMD | BGA
XA7A12T-1CPG238Q

XA7A12T-1CPG238Q - 112-I/O Artix-7 FPGA | AMD | BGA

AMD XA7A12T-1CPG238Q is an Artix-7 field-programmable gate array with 112 user I/O, programmable logic resources identified as 737280 in the product listing, and 12800 additional device characteristics identified in the catalog record. The device is supplied in a 238-ball CSPBGA package designated CPG238. Its combination of programmable logic and 112 I/O makes it suitable for compact embedded systems requiring flexible parallel interfaces, control logic, signal processing, and programmable hardware acceleration. An FPGA is a programmable semiconductor in the broader logic and semiconductor hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA uses configurable logic blocks, programmable interconnects, and input/output resources to implement a design selected through a configuration bitstream. Artix-7 devices are positioned as low-power, cost-conscious FPGAs for embedded, industrial, communications, consumer, and instrumentation applications. The XA7A12T-1CPG238Q's principal cataloged feature is its 112 available I/O in a 238-CSPBGA package. This interface count allows a board to connect external memory, sensors, converters, communications transceivers, and control peripherals without relying on a fixed pin assignment. Its programmable architecture also permits logic revisions, protocol adaptation, parallel-to-serial conversion, and hardware accelerators to be implemented in one integrated device rather than a collection of fixed-function components. The -1 suffix identifies the device's performance grade within the XA7A12T family. Exact clock-frequency, resource-breakdown, voltage, and temperature limits should be selected from the corresponding AMD/Xilinx family documentation for the production temperature grade and installed package. Engineers should also treat the 238-ball BGA footprint as a fine-pitch assembly constraint requiring controlled PCB design, inspection, and soldering capability. Typical uses include industrial control and data acquisition, industrial networking, embedded vision pre-processing, sensor fusion, test-and-measurement front ends, communications infrastructure, and low-power edge-processing modules. In these systems, the 112-I/O interface can support parallel buses and control signals, while programmable logic can implement protocol framing, filtering, timing, and data movement in hardware. A key design consideration is that changing the FPGA family, speed grade, package, or pinout can alter the Ball Grid Array assignment even when the device name appears similar. Preserve the exact 238-CSPBGA footprint, confirm all bank voltages in the selected family documentation, and validate the configuration interface and boundary-scan requirements before releasing a PCB. This page consolidates the verified product identity, package and I/O details, sourcing workflow, comparison framework, and practical migration considerations. It also distinguishes direct pin-compatible alternatives from broader FPGA choices so engineers can assess replacement decisions without confusing a functional substitute with a true drop-in device.

RFQ Contact
XA7A12T-1CSG325I - 150 I/O Artix-7 FPGA | AMD
XA7A12T-1CSG325I

XA7A12T-1CSG325I - 150 I/O Artix-7 FPGA | AMD

The AMD XA7A12T-1CSG325I is an Artix-7 field-programmable gate array with 12,800 logic cells, 150 I/O, and 737,280 reported device parameters in a 324-ball CSBGA package. It is designed for compact, high-density programmable logic where parallel processing, flexible I/O, and reconfigurable system architecture are more important than the power envelope of a larger FPGA. The CSBGA-325 package also provides a substantial ball count for power, ground, configuration, and high-speed connectivity. An FPGA is a semiconductor whose digital circuitry is defined after manufacture through a configuration bitstream. The Artix-7 family combines programmable logic blocks, block RAM, programmable I/O, and high-speed serial transceivers. Within that product hierarchy, the XA7A12T sits at the lower end of the Artix-7 capacity range, making it appropriate for protocol bridging, embedded control, sensor aggregation, industrial automation, test equipment, and communication interfaces when the design does not require the logic resources of a larger device. The XA7A12T-1CSG325I provides 150 I/O and 12,800 logic cells according to its product listing. Its 737,280-value device parameter should be compared with the manufacturer ordering information before assigning a specific internal resource role. The device uses the CSG325 package designation for a 324-ball ceramic substrate BGA, and listing data identifies an industrial-temperature option for this part number. Configuration, programming, and design-tool support must be checked against the selected AMD device family and bitstream requirements. The CSBGA package demands careful PCB planning because its fine ball pitch, dense escape routing, and numerous supply connections make electrical, thermal, and assembly constraints more demanding than those of a large-lead-count plastic package. Power rails should be distributed with low-impedance planes or properly terminated networks, while decoupling must be placed close to the relevant supply balls. A stable reference and configuration interface are equally important because incorrect sequencing can prevent reliable startup even when the board-level schematic is otherwise correct. Typical uses include industrial motor and motion control, factory data acquisition, programmable instrumentation, embedded communications, camera and image-processing front ends, and compact test systems. The large I/O count can simplify board partitioning when multiple buses, control signals, and serial links must coexist, while the 12,800-cell capacity supports parallel datapaths without moving to a larger FPGA. For a new layout, use the manufacturer package drawing and pinout files as the controlling mechanical and electrical references. Verify ball assignments, power requirements, decoupling, configuration pins, and exposed thermal-management structures before releasing artwork. Use the manufacturer device documentation to confirm speed grade, temperature coverage, supported configuration methods, and the exact tool versions compatible with the bitstream. This product page combines the confirmed device identifiers with practical guidance for FPGA selection, CSBGA layout, thermal planning, configuration, and replacement assessment. It also separates confirmed package and resource details from values that must be confirmed in the manufacturer datasheet, helping engineers move directly into footprint-level design review.

RFQ Contact
XA7A12T-2CPG238I - Automotive Artix-7 FPGA | AMD
XA7A12T-2CPG238I

XA7A12T-2CPG238I - Automotive Artix-7 FPGA | AMD

The AMD XA7A12T-2CPG238I is an automotive Artix-7 field-programmable gate array with 737,280 programmable logic cells, 12,800 logic elements, and 106 I/Os in a 238-LFBGA CSPBGA package. It combines programmable digital logic, block RAM, DSP resources, and programmable I/O in a single surface-mount device. An FPGA is a reconfigurable digital semiconductor used when fixed-function logic is insufficient or when hardware updates are required after manufacture. Within the product hierarchy, the XA7A12T belongs to the Artix-7 FPGA family and the broader FPGA and CPLD category. Its fabric can implement control logic, communication interfaces, data acquisition, image processing, and embedded processor systems, allowing one package to serve several related functions. The device is identified by the XA automotive-oriented family designation, a -2 speed grade, and the CPG238 package suffix. Listing data identifies 106 I/Os for this orderable configuration, while another catalog description states 112 I/O for the 238-CSBGA device. The difference may reflect how exposed, bonded, or package-specific I/O resources are counted, so final PCB allocation should use the AMD package drawing and pinout for the exact orderable part. Compared with the industrial XC7A12T-2CPG238I listed under the same CPG238 package, the XA7A12T designation identifies the automotive-oriented XA product family. The Artix-7 architecture is positioned for low-power, cost-conscious programmable systems where designers need substantially more parallel processing capability than a conventional microcontroller provides. Its 737,280-cell fabric supports concurrent control, data movement, and fixed-point signal-processing tasks. Typical uses include automotive sensing and control, industrial automation, communications infrastructure, medical instrumentation, robotics, and compact embedded systems. A multi-gigabit transceiver, video pipeline, sensor fusion path, or real-time control engine can be implemented in parallel without relying on many discrete components. Configuration storage, clocking, serial connectivity, and auxiliary memory interfaces remain important board-level integration considerations. For PCB design, preserve the manufacturer-specified ball grid and escape-routing geometry, provide decoupling close to the supply balls, and plan configuration, clock, and reset signals to avoid contention during startup. Differential and high-speed interface routing must follow the AMD Artix-7 layout guidance, including return-path and reference-plane continuity. This product page combines exact ordering information, same-family replacement context, application guidance, and design-focused comparison content. It is intended to help engineers identify the correct package and device variant before requesting a quote through the Request a Quote form on this page.

RFQ Contact
XA7A12T-2CSG325I - Automotive Artix-7 FPGA 12.8K LC | AMD
XA7A12T-2CSG325I

XA7A12T-2CSG325I - Automotive Artix-7 FPGA 12.8K LC | AMD

The AMD Xilinx XA7A12T-2CSG325I is an automotive-qualified Artix-7 field programmable gate array (FPGA) in a 324-ball LFBGA/CSPBGA (CSG325) package. It provides 12,800 logic cells, 150 user I/O, and 737,280 bits of block RAM, with a -2 speed grade that supports high-performance, real-time processing in harsh environments. As part of the XA Artix-7 automotive family, this device delivers AEC-Q100-grade dependability and operates over an industrial temperature range. An FPGA (field-programmable gate array) is a semiconductor integrated circuit whose logic fabric can be configured after manufacturing using hardware description languages such as Verilog or VHDL. FPGAs occupy a unique position in the programmable logic hierarchy, combining hardware-level parallelism with reconfigurability and low-latency I/O. The Artix-7 architecture targets power-conscious, high-volume applications that need moderate logic density, rich I/O flexibility, and deterministic timing. Key feature highlights include 40 DSP48E1 slices for high-throughput multiply-accumulate signal processing, three clock management tiles (CMTs), and a 1.0 V core supply that reduces dynamic power. The -2 speed grade is ideal for 100-300 MHz interface and logic designs. The CSG325 package measures only 15 x 15 mm, with a 0.8 mm ball pitch that allows cost-effective 4-layer PCB routing. The device is JESD-609 e1 lead-free (SnAgCu finish), RoHS compliant, and MSL-3 rated with a 260 C peak reflow temperature. Architecturally, the device uses the proven 7-series SRAM-based fabric with 6-input LUTs, dual flip-flops per slice, and cascade chains for arithmetic. The internal block RAM can be configured as 36 Kb or 18 Kb primitives with multiple parity bits. The configuration engine supports master SPI, master BPI, slave SelectMAP, slave serial, and JTAG modes, providing flexible boot options for automotive and industrial systems. Typical applications are automotive ADAS pre-processing, sensor fusion gateways, industrial motor control, medical ultrasound front ends, networking line cards, broadcast video interfaces, and test equipment. The 150 user I/O with HR (high-range, 1.2 V to 3.3 V) capability lets designers interface directly to many sensors, ADCs, and memory devices without external level shifters. When designing with this device, follow AMD/Xilinx UG583 recommendations for BGA power decoupling: place 1.0 uF and 0.1 uF capacitors under the package on VCCINT, and ensure a monotonic, sequenced power-up of VCCINT, VCCBRAM, and VCCO for reliable configuration.

RFQ Contact
XA7A15T-2CSG325I - 16,640-Cell Artix-7 FPGA | AMD
XA7A15T-2CSG325I

XA7A15T-2CSG325I - 16,640-Cell Artix-7 FPGA | AMD

The AMD XA7A15T-2CSG325I is an automotive-grade Artix-7 field-programmable gate array built on 28 nm FPGA technology, with 16,640 logic cells, 150 I/Os, a maximum operating frequency of 628 MHz, and a 1 V core supply. The device is offered in a CSBGA-325 package identified as 324-LFBGA/CSPBGA in product listings. Its speed grade is 2 and its temperature grade is industrial. An FPGA is a reconfigurable digital semiconductor whose programmable logic blocks, routing fabric, memory resources, and programmable I/Os implement custom digital functions. An Artix-7 FPGA belongs to the broader FPGA and CPLD category and provides a configurable alternative to fixed-function logic. The XA family targets applications requiring the performance and integration of programmable logic with automotive qualification and extended operating conditions. The XA7A15T-2CSG325I provides 16,640 logic cells and 150 user I/Os in a 325-ball CSPBGA. It supports a 1 V operating voltage and a listed maximum frequency of 628 MHz. Its automotive-oriented XA-series identity and AEC-Q100 association distinguish it from the related commercial XC7A15T device, while the CSG325 package supports deployment on the same class of board-level footprint. The device integrates programmable logic with dedicated FPGA resources suitable for parallel data processing, control, interface bridging, and embedded signal handling. Its 28 nm process technology balances performance and power efficiency in compact embedded systems. Because a CSBGA package has a dense ball array and exposed thermal requirements, board design must follow AMD's package pinout files, power recommendations, and multilayer PCB layout guidance. Typical uses include automotive control modules, industrial automation equipment, communications infrastructure, sensor processing, and compact embedded vision systems. The 150-I/O count is useful for parallel sensor acquisition and external control interfaces, while 16,640 logic cells allow moderate protocol, control, and data-processing functions to be consolidated into one programmable device. Use the exact CSG325 package outline and pin definitions during schematic capture and PCB layout. Do not substitute a CSG324 device without verifying its ball map, and do not infer pin compatibility from the family name alone. Confirm the speed grade, temperature grade, power configuration, and migration requirements before releasing a new PCB or production order. This page combines the XA7A15T-2CSG325I device identity, package characteristics, qualified drop-in alternatives, comparison parameters, and practical design guidance. It is intended to help engineers confirm compatibility faster while retaining the distinction between automotive XA, commercial XC, speed-grade, and package variants.

RFQ Contact
XA7A25T-1CSG325Q - Automotive Artix-7 FPGA | AMD
XA7A25T-1CSG325Q

XA7A25T-1CSG325Q - Automotive Artix-7 FPGA | AMD

The AMD XA7A25T-1CSG325Q is an automotive XA Artix-7 field-programmable gate array with 23,360 logic cells, 150 user I/O, 150 DSP slices, 1,658,880 bits of block RAM, a speed grade of 1, and a 324-LFBGA package. It combines programmable logic, DSP, and memory resources in a single surface-mount device for automotive control, instrumentation, communications, and sensor-processing systems. An FPGA is a semiconductor whose digital logic is configured after manufacture. It belongs to the programmable-logic hierarchy, alongside CPLDs, and provides parallel implementation of control algorithms, data processing, and hardware interfaces. The Artix-7 XA family combines a 28-nm programmable-logic architecture with automotive qualification. The XA7A25T-1CSG325Q supports junction temperatures from -40°C to 125°C and is identified as an AEC-Q100 automotive-grade part. The device provides 23,360 logic cells for finite-state machines, protocol engines, and control logic. Its 150 DSP slices support fixed- and floating-point operations used in signal processing, while 1,658,880 bits of block RAM provide dedicated on-chip storage. The 150 user I/O support connections to external sensors, transceivers, memory, and automotive controllers. Speed grade 1 identifies its performance class within the XA7A25T family. The 324-LFBGA package supports dense board-level integration but requires careful escape-routing and BGA assembly practices. Power, decoupling, signal integrity, and thermal design depend on the selected bitstream and operating conditions. Programming typically uses a JTAG interface, while configuration can be loaded from nonvolatile memory or another configured device according to the board architecture. The manufacturer overview identifies the device as part of the XA Artix-7 product selection. Typical uses include automotive body and chassis control, sensor fusion preprocessing, CAN or LIN interface aggregation, gateway logic, industrial monitoring, and low-latency digital signal processing. The automotive temperature range and AEC-Q100 qualification make it most appropriate when design qualification requires a rugged automotive-grade programmable device. For layout, follow the AMD package pinout and PCB design guidance, place decoupling capacitors near the relevant power pins, and provide clean power for every voltage rail. Confirm the selected configuration, clocking scheme, I/O standards, and unused-pin treatment before tape-out or production programming. This page combines the manufacturer product overview, verified distributor attributes, drop-in family comparisons, and practical selection guidance to support schematic review, footprint validation, qualification planning, and sourcing decisions.

RFQ Contact
XA7A25T-2CSG325I - Automotive Artix-7 FPGA | AMD
XA7A25T-2CSG325I

XA7A25T-2CSG325I - Automotive Artix-7 FPGA | AMD

The AMD XA7A25T-2CSG325I is an automotive Artix-7 XA field-programmable gate array with 150 I/O, 23,360 logic cells, a -2 performance grade, and AEC-Q100 qualification, housed in a 324-LFBGA CSPBGA package. It combines programmable logic, block RAM, digital signal processing resources, and high-speed serial connectivity in a single device. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after manufacture. An Artix-7 FPGA belongs to the broader programmable-logic hierarchy, connecting configurable logic blocks, fixed I/O, memory, DSP resources, and clocking systems. Compared with an application-specific integrated circuit, an FPGA allows hardware behavior to be revised through bitstream programming, shortening development cycles and supporting product differentiation. The XA7A25T-2CSG325I provides 150 user I/O and 23,360 logic cells in the CSG325 package. Its automotive-oriented XA product line and AEC-Q100 qualification distinguish it from conventional Artix-7 devices intended for industrial or commercial environments. The -2 speed designation identifies its performance grade, while the CSG325 package code identifies the 324-ball land pattern used by this device family. The device integrates programmable logic with dedicated resources for memory-intensive designs, parallel data processing, serial links, and clock management. This heterogeneous architecture allows multiple digital functions to be consolidated into one FPGA. The manufacturer datasheet should be consulted for exact block counts, memory capacity, DSP resources, supported I/O standards, speed ratings, power characteristics, and configuration requirements before a design is released. Typical applications include automotive infotainment and telematics controllers, camera and radar signal-processing front ends, industrial vision systems, secure network equipment, industrial controls, and high-reliability data-acquisition platforms. The combination of programmable logic, 150 I/O, AEC-Q100 qualification, and a compact BGA package is especially useful when designers need lifecycle flexibility, parallel processing, and external communication interfaces in one component. PCB implementation requires careful treatment of the fine-pitch BGA land pattern, power and ground distribution, decoupling, configuration access, clocking, and high-speed signal integrity. Designers should follow the AMD package, pinout, and PCB design guidance and validate the complete power, thermal, and signal-integrity design before production. This page organizes the exact ordering information, package identification, automotive qualification, related family members, application guidance, and drop-in comparison points into a concise engineering reference for FPGA design review and sourcing.

RFQ Contact
XA7A35T-1CSG324Q - 33,280 Logic Cell Artix-7 FPGA | AMD
XA7A35T-1CSG324Q

XA7A35T-1CSG324Q - 33,280 Logic Cell Artix-7 FPGA | AMD

The AMD XA7A35T-1CSG324Q is an Artix-7 XA field-programmable gate array with 33,280 logic cells, 210 user I/O, and a 324-LFBGA CSPBGA package. It combines programmable logic, block RAM, and programmable I/O in a compact 15 mm-class surface-mount package for industrial, communications, instrumentation, and embedded-control systems. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining parallel digital design capabilities with the flexibility of firmware updates. Unlike fixed-function logic, an Artix-7 FPGA can implement multiple control, communication, signal-processing, and interface functions in one device while retaining field reconfiguration support. The XA7A35T provides 33,280 logic cells and 210 user I/O in the CSG324 CSPBGA package. Its speed designation is -1, indicating the performance grade represented by the XA7A35T-1 family designation. The target ordering code uses the CSG324 package associated with the XA7A35T device and the suffix CSG324Q. The package combines a 324-ball land-grid array with a small body size suitable for dense PCB layouts. The Artix-7 architecture supports parallel processing, state-machine control, protocol handling, and programmable signal acquisition. Its 210 user I/O provide external connectivity for digital buses, clocks, control signals, and serial peripherals. Because an FPGA integrates configurable logic and dedicated block RAM, designers can balance parallel datapaths with sequential control rather than assigning each function to a separate fixed device. Typical uses include industrial automation, communication equipment, test and measurement instruments, embedded data-acquisition systems, sensor processing, and general-purpose digital control. The same device family appears in 324-CSBGA options, and the XA7A35T-1CSG324I shares the CSG324 package and Artix-7 resource configuration for temperature-grade-sensitive designs. PCB implementation should follow the AMD package pinout and recommended decoupling layout closely because the 324-ball CSPBGA requires dense escape routing and careful via placement. Power, ground, configuration, clock, and high-speed I/O nets require validated reference-plane transitions and short return paths. The design must also account for configuration startup, system reset behavior, JTAG access, clock stability, and thermal conditions across the selected ambient range. This product page combines device identity, package information, verified ordering data, drop-in alternatives, application guidance, and design considerations into an engineering-focused reference. It is intended to accelerate component selection, footprint confirmation, replacement assessment, and hardware planning before the complete AMD Artix-7 documentation is reviewed during design release.

RFQ Contact