Products (44,000+)

XC2C32A-4PCG44C - 32-Macrocell 323MHz CPLD | AMD Xilinx
XC2C32A-4PCG44C

XC2C32A-4PCG44C - 32-Macrocell 323MHz CPLD | AMD Xilinx

The AMD Xilinx XC2C32A-4PCG44C is a CoolRunner-II complex programmable logic device (CPLD) with 32 macrocells, 750 logic gates, a maximum stated operating frequency of 323 MHz, and a 44-pin PLCC package. The device is manufactured in 0.18 µm CMOS technology and supports a 1.8 V core supply. Its -4 suffix identifies a specific speed grade, while the PCG44C suffix identifies the commercial-temperature 44-lead PLCC configuration. The part combines deterministic nonvolatile configuration with fast combinational logic and extensive I/O support in a surface-mount-compatible package. A CPLD is a programmable semiconductor that sits between fixed-function logic and more complex FPGAs. Its architecture groups user logic into macrocells connected by a programmable interconnect. Because the configuration is stored in nonvolatile memory, the XC2C32A retains its logic after power is removed and requires no external configuration PROM. In the system hierarchy, a CPLD is a programmable-logic device, a digital integrated circuit, and a semiconductor component used to implement control, interface, decoding, and glue-logic functions. Key device characteristics include 32 macrocells, 750 gates, 323 MHz maximum operating frequency, 0.18 µm CMOS fabrication, and operation from a 1.8 V supply. The CoolRunner-II architecture provides nonvolatile configuration and fast propagation performance suited to compact control logic. The DS310 product specification also lists support for multiple LVCMOS and LVTTL input/output standards, including 1.5 V, 1.8 V, 2.5 V, and 3.3 V operating conditions described in that document. The XC2C32A implementation combines a relatively small logic array with numerous dedicated I/O pins. This balance makes it useful where a designer needs reliable timing closure, short routing paths, and a simple configuration workflow rather than the resource density of an FPGA. Its 44-lead PLCC outline supports compact board layouts, and its -4 speed grade provides a defined performance level for designs operating at or below the device's stated frequency ceiling. Typical applications include bus decoding and address multiplexing, peripheral interface control, industrial control and automation modules, firmware boot sequencing, display and keypad control, low-power embedded glue logic, and general-purpose prototyping platforms. The device is particularly suitable for designs in which nonvolatile configuration, moderate logic density, and rapid implementation are more valuable than large embedded processor or memory resources. When designing a PCB for this CPLD, verify every signal against the DS310 pin description table and confirm the voltage level of each I/O bank before connecting external circuitry. Provide a stable core supply with suitable decoupling, route sensitive clock and control nets away from noisy switching nodes, and use the manufacturer's programming and test recommendations. Legacy software and driver support should be validated before a new production design depends on the CoolRunner-II toolchain. This page combines device specifications, package identification, lifecycle guidance, drop-in replacement analysis, comparison tables, and practical board-level notes. It provides engineers with the information needed to determine whether the XC2C32A-4PCG44C fits an existing 44-pin PLCC footprint and how to evaluate equivalent speed-grade and temperature-grade options before committing a design to a legacy programmable-logic family.

RFQ Contact
XC2C32A-4QFG32C - 32-Macrocell 1.8V CPLD | AMD | Logic Control
XC2C32A-4QFG32C

XC2C32A-4QFG32C - 32-Macrocell 1.8V CPLD | AMD | Logic Control

The AMD XC2C32A-4QFG32C is a CoolRunner-II complex programmable logic device with 32 macrocells, a 1.8 V core supply, a speed grade of -4, and a 32-pin QFN surface-mount package. Its 0.18 µm CMOS architecture supports logic densities up to 750 gates, while the device provides in-system programmability for compact control, interface, and glue-logic designs. A CPLD is a user-programmable digital logic device classified as a programmable logic semiconductor. In the product hierarchy, a CPLD sits below FPGA and above fixed-function logic. Unlike a mask-programmed device, it can be configured after manufacture, making it useful for prototypes, production controllers, bus adapters, signal conditioning, and legacy system integration. The CoolRunner-II architecture combines nonvolatile configuration storage with predictable interconnect timing. The XC2C32A family is optimized for 1.8 V systems and supports logic delays as fast as 3.0 ns, depending on the characterized path and loading conditions. The -4 designation identifies the device speed grade, while published comparison information lists an internal frequency of 323 MHz. Its architecture includes configurable output-pin functions such as slew-rate control, bus hold, pull-up, open-drain operation, and programmable grounds. Individual input pins may also use a Schmitt-trigger function for improved handling of slower or noisy signals. The 32-macrocell device provides a practical balance between logic density, pin count, and routing predictability. A comparison record identifies 750 gates, 32 macrocells, and 0.18 µm CMOS technology for the XC2C32A family. Its macrocell architecture supports registered outputs as well as direct-input register configurations, allowing output-state storage, pipelining, and state-machine implementation. Configuration retention and boundary behavior are managed through the CoolRunner-II feature set. Typical applications include compact peripheral controllers, bus interface logic, protocol converters, industrial control modules, instrumentation signal conditioning, and embedded system support logic. The in-system programming capability allows a board designer to configure the same physical CPLD for different hardware personalities, while the relatively small QFN-32 package supports compact boards where a larger FPGA would be unnecessary. The primary design constraint is the limited logic and I/O capacity of 32 macrocells. Engineers should reserve resources for configuration pins, dedicated inputs, power, ground, and board-level programming access. Signal-integrity planning should also account for the 1.8 V core environment and package routing density. Validate the final pin assignment, timing, and JTAG implementation against the AMD CoolRunner-II XC2C32A datasheet. This product overview combines the verified family specifications, package information, search-demand queries, and practical engineering guidance needed to evaluate the XC2C32A-4QFG32C. The comparison table also distinguishes documented speed-grade and package options, helping engineers identify a suitable drop-in device without confusing a pin-compatible change with an unqualified redesign.

RFQ Contact
XC2C32A-4VQ44C - 32-Macrocell 1.8V CPLD | AMD | TQFP-44
XC2C32A-4VQ44C

XC2C32A-4VQ44C - 32-Macrocell 1.8V CPLD | AMD | TQFP-44

The AMD/Xilinx XC2C32A-4VQ44C is a CoolRunner-II complex programmable logic device with 32 macrocells, 750 equivalent gates, 33 user I/Os, and a 1.8 V supply in a 44-pin TQFP package. It combines a 450 MHz internal frequency with a listed 4 ns propagation delay, providing reconfigurable hardware for glue logic, control, decoding, and interface bridging. A CPLD is a user-programmable semiconductor that belongs to the programmable-logic hierarchy alongside FPGAs. Unlike a fixed combinational or sequential logic circuit, a CPLD allows logic assignments to be changed through programming. The CoolRunner-II architecture combines programmable logic with I/O resources, making the XC2C32A useful where deterministic short propagation delays, compact implementation, and nonvolatile configuration are important. Key features include 32 macrocells, 750 equivalent gates, 33 user I/O pins, 3.0 ns pin-to-pin logic delays, and low quiescent current as low as 12 uA. The -4 speed designation identifies the manufacturer's speed grade, while the C suffix identifies the stated commercial operating-temperature variant. The device uses 0.18 um CMOS technology and is optimized for 1.8 V systems. The XC2C32A architecture is intended for designs requiring moderate logic density rather than FPGA-scale processing. Its macrocell-based structure can support control logic, state machines, bus decoding, address decoding, and protocol interface glue. Available operating specifications include a 6 x 6 mm package body, 0.50 mm pitch, and 44 pins, although the complete physical package drawing is identified by conflicting secondary listings. Typical applications include industrial control and automation, embedded system support logic, communication-interface glue, legacy peripheral interconnection, and compact programmable control modules. The 33 user I/Os allow the device to connect external sensors, memory interfaces, status indicators, and peripheral control signals while keeping the design compact. Designers should verify the exact pinout, I/O standards, power requirements, configuration interface, and timing constraints in AMD document DS310 before layout. Because secondary sources disagree on whether the physical package is a 44-pin TQFP or a 56-contact CSP representation, the manufacturer pinout drawing is the controlling reference. Do not substitute a similarly named XC2C32A speed grade without reviewing its timing grade and temperature suffix. This page combines verified manufacturer and distributor information with price references as of 2026-10-28, same-family drop-in candidates, comparison parameters, and practical selection guidance. It also distinguishes directly supported facts from specification fields that require confirmation from the manufacturer datasheet.

RFQ Contact
XC2C32A-4VQG44C - 32-Macrocell 1.8V CPLD | AMD Xilinx
XC2C32A-4VQG44C

XC2C32A-4VQG44C - 32-Macrocell 1.8V CPLD | AMD Xilinx

The AMD Xilinx XC2C32A-4VQG44C is a CoolRunner-II complex programmable logic device (CPLD) built around 32 macrocells and 33 user I/O pins. It is specified for 1.8V systems, uses CMOS programmable logic technology, and is packaged in a 44-pin VQFP-style package. The -4 speed grade is identified in the family documentation with approximately 3.8 ns propagation delay, while one product listing identifies an internal frequency of 450 MHz and an operating temperature range extending to 125 °C. The device is intended for deterministic glue logic, bus interfacing, control logic, signal conditioning, and low-power embedded systems. A CPLD is a programmable logic device that combines multiple macrocell logic sections into one reconfigurable integrated circuit. Unlike a mask-programmed fixed-function logic device, a CPLD can be programmed after manufacture, allowing designers to implement control, decoding, multiplexing, and interface functions in a compact device. The CoolRunner-II family combines a CMOS CPLD architecture with low-power operation and in-system programmability, making it useful for designs that require flexible logic without the resource complexity of a large FPGA. The XC2C32A provides 32 macrocells, approximately 750 logic gates according to the family comparison information, and 33 user I/Os. Its listed features include in-system programmability, hot-pluggable PLA architecture, and high pinout retention. The device is optimized for 1.8V systems and is described as offering pin-to-pin replacement compatibility with earlier XC2C32 devices when used with the appropriate AMD Xilinx cross-reference information. These characteristics make it useful for legacy and modernization designs where maintaining the existing board footprint is important. The -4 suffix identifies the performance grade of this device, while VQG44C identifies the package and temperature-related ordering configuration. The package information reported for the target varies between distributor and catalog pages, with 44-pin VQFP notation used for the target and a separate catalog entry describing a 56-pin CSP configuration. Engineers should therefore confirm the mechanical drawing and pin assignment against the exact package suffix before releasing a PCB footprint. The CPLD is not a power semiconductor, so a safe-operating-area chart is not applicable. Typical applications include bus arbitration, address decoding, control-signal generation, peripheral interfacing, industrial control boards, and compact embedded control systems. The 33 user I/Os can be assigned to digital inputs and outputs, while the programmable macrocells implement Boolean equations, counters, state machines, and registered logic. The 1.8V operating focus helps reduce power consumption in systems where the CPLD interfaces with modern low-voltage processors, transceivers, and memory components. Design planning should begin with the pin assignment table and the CoolRunner-II device documentation. Confirm that the selected package has the required power, ground, configuration, clock, and user I/O assignments, and use the exact package suffix to select the correct PCB land pattern. Designers should also account for the programmable logic and I/O limitations of the 32-macrocell device rather than assuming FPGA-scale resources. This page consolidates the part identity, package caveats, documented family characteristics, replacement guidance, and practical design considerations into an engineering-focused component reference.

RFQ Contact
XC2C32A-6CP56C - 32-Macrocell 200MHz CPLD | Xilinx
XC2C32A-6CP56C

XC2C32A-6CP56C - 32-Macrocell 200MHz CPLD | Xilinx

Xilinx XC2C32A-6CP56C is a CoolRunner-II complex programmable logic device with 750 logic gates, 32 macrocells, 33 user I/O pins, and a maximum operating frequency of 200 MHz. It is built with 0.18 µm CMOS technology, optimized for 1.8 V systems, and supplied in a 56-ball CSP package measuring 6 x 6 mm with 0.50 mm pitch. The -6 speed designation corresponds to a listed propagation delay of 4 ns in the verified distributor specifications. A CPLD is a programmable logic device that combines nonvolatile configuration memory, programmable AND logic, and programmable OR interconnect. Within the broader semiconductor hierarchy, a CPLD is a user-programmable digital IC, complementing FPGA and ASIC technologies. The XC2C32A belongs to the CoolRunner-II family and provides deterministic logic implementation for glue logic, control, decoding, state-machine, and interface-adaptation circuits. Key device characteristics include 32 macrocells, 750 gates, 33 user I/O pins, and two logic array blocks. The verified data also reports a 4 ns propagation delay, an internal frequency of 450 MHz, CMOS logic-family construction, and a 0.18 µm CMOS process. A pin-to-pin delay as low as 3.0 ns is also listed in the component feature summary, while quiescent current is reported as low as 12 µA. The device architecture combines configurable logic with low-power 1.8 V operation. Its 32 macrocells provide moderate logic density for compact control logic rather than high-volume parallel processing. The reported 450 MHz internal frequency should not be confused with the 200 MHz maximum device operating frequency: the latter is the more conservative figure presented in the verified component specifications and is the appropriate basis for initial timing design. Typical uses include boot and power sequencing, peripheral interfacing, protocol and address decoding, industrial control logic, test-equipment control, and low-power embedded system support. The 33 user I/O pins make it useful for designs requiring moderate pin density without moving to a larger programmable-logic package. Its 56-ball CSP footprint also supports compact surface-mount assemblies when PCB-routing and assembly-process requirements are carefully observed. The primary design consideration is timing closure at the system level. Engineers should use the official AMD DS310 datasheet for pinout, bank voltage, AC timing, configuration, and absolute-maximum ratings because those details are not present in the supplied distributor excerpts. A 4 ns propagation delay supports timing-critical glue logic, but external setup, hold, skew, and routing margins still determine whether the complete interface meets its target clock. This page consolidates the verified distributor specifications, package information, sourcing data, and same-family drop-in alternatives. It also distinguishes the device's core architecture from cross-brand CPLD families that may be functionally comparable but cannot be treated as pin-compatible without an independent footprint and electrical verification.

RFQ Contact
XC2C32A-6CPG56C - 32-Macrocell 1.8V CPLD | AMD Xilinx
XC2C32A-6CPG56C

XC2C32A-6CPG56C - 32-Macrocell 1.8V CPLD | AMD Xilinx

AMD Xilinx XC2C32A-6CPG56C is a CoolRunner-II complex programmable logic device with 32 macrocells, 33 user I/O, and a 6 ns speed grade. It uses 0.18 µm CMOS technology, supports optimized 1.8 V systems, and is housed in a 56-pin 6 × 6 mm CSBGA package with a 0.50 mm pitch. The device is designed for compact, low-power logic implementation where nonvolatile configuration, fast routing, and deterministic in-system operation are valuable. A CPLD, or complex programmable logic device, is a programmable semiconductor positioned between basic programmable logic arrays and FPGAs. Its interconnected macrocells combine combinational and registered logic functions, while embedded configuration memory determines the device behavior after power-up. Within the semiconductor hierarchy, the XC2C32A belongs to the CPLD family, the programmable-logic category, and ultimately the broader integrated-circuit and semiconductor markets. Principal features include 32 macrocells, approximately 750 equivalent logic gates, 33 user I/O, and a fast 6 ns device designation. The CoolRunner-II architecture supports 1.8 V operation and LVCMOS interfaces at 3.3 V, 2.5 V, and 1.8 V when electrical conditions permit. Its low quiescent current, reported as low as 12 µA, is valuable in portable and power-constrained equipment. The two-bank I/O organization also provides flexibility for interface partitioning and level-compatible system connections. The CSBGA package measures 6 × 6 mm and uses a 0.50 mm pitch, making it substantially more compact than leaded or larger plastic packages. This fine-pitch land pattern requires careful PCB layout, exact ball-to-pad geometry, and assembly-process control. Although the package offers high connection density, thermal behavior and solder-joint reliability must be evaluated against local power dissipation and the board's copper and thermal via structure. Typical applications include compact interface controllers, display and peripheral glue logic, industrial control sequencers, low-power embedded systems, and portable equipment. The combination of 32 macrocells and 33 I/O is well suited to consolidating control logic around a processor or microcontroller while avoiding the resource overhead of a larger FPGA. The device can also implement bus arbitration, state machines, protocol conversion, and asynchronous interface bridging. When designing around the XC2C32A-6CPG56C, confirm the exact ball assignments, voltage requirements, and I/O-standard constraints in AMD DS310 before fabrication. Keep sensitive traces short, provide the required configuration and control paths, and validate the PCB assembly process because the 0.50 mm CSBGA geometry offers limited tolerance for registration and solder defects. This product record combines package, logic-capacity, interface, lifecycle, and replacement information with practical guidance for schematic capture, high-density PCB layout, and CPLD implementation. It is intended to help engineers determine whether the 56-pin CoolRunner-II device fits a design before beginning board layout or production planning.

RFQ Contact
XC2C32A-6CPG56I - 32-Macrocell 1.8V CPLD | AMD Xilinx
XC2C32A-6CPG56I

XC2C32A-6CPG56I - 32-Macrocell 1.8V CPLD | AMD Xilinx

The AMD Xilinx XC2C32A-6CPG56I is a CoolRunner-II complex programmable logic device with 32 macrocells, 33 user I/Os, and a 1.8 V optimized CMOS architecture in a 56-pin CSBGA package. The device belongs to the CoolRunner-II CPLD family and combines programmable logic blocks with a fast in-system programming interface. It is specified for 0.18 µm CMOS implementation, 750 equivalent gates, and operation up to 200 MHz according to the AMD CoolRunner-II data sheet. A CPLD, or complex programmable logic device, is a user-programmable semiconductor that implements digital control, interface, and glue-logic functions. Its internal macrocells contain programmable logic functions connected by a fixed interconnect structure. The broader hierarchy is CPLD → programmable logic device → digital semiconductor. Unlike an FPGA with a large routing fabric, a CPLD generally offers more predictable timing and simpler design flows for modest logic densities, making the XC2C32A suitable for compact control and interface systems. The XC2C32A family provides 32 macrocells and 33 user I/Os. Published family information identifies fast pin-to-pin logic delays of approximately 3.0 ns to 3.8 ns and quiescent current as low as 12 µA. Its optimized architecture supports effective logic synthesis, while in-system programmability allows configuration or updates without removing the device from the circuit. These characteristics benefit low-power, 1.8 V systems where deterministic routing and compact logic capacity are more important than very high I/O density. The suffix identifies the device configuration within the CoolRunner-II product line. The “-6” denotes the performance grade, “CPG56” identifies the 56-pin CSBGA package configuration, and the trailing “I” identifies the industrial temperature option. Because the package uses a 6 mm × 6 mm body with a 0.50 mm pitch, PCB design must follow the CSBGA land pattern and account for thermal, soldering, and via-in-pad requirements specified in the AMD package documentation. Typical uses include industrial control logic, interface bridging, signal conditioning, low-power embedded control, and compact communications equipment. The 33 user I/Os can connect digital sources and destinations, while the programmable architecture consolidates functions that might otherwise require several conventional logic devices. The device is also suitable for prototypes and legacy product maintenance where an established CoolRunner-II design must be preserved. Designers should use the pin-description table and device-specific constraints in DS310 before assigning I/O standards. Power sequencing, I/O voltage compatibility, decoupling, and termination must be reviewed against the selected board voltage because the CPLD is optimized for 1.8 V systems. Programming tool compatibility and the target bitstream should also be verified before committing a design to production. This product overview combines the device architecture, package characteristics, verified ordering references, pin-compatible family alternatives, and practical design guidance. It is intended to help engineers evaluate the XC2C32A-6CPG56I for compact programmable-logic designs while distinguishing speed-grade, package, and temperature-option differences among alternatives.

RFQ Contact
XC2C32A-6PC44C - 32-Macrocell 5.5ns CPLD | Xilinx
XC2C32A-6PC44C

XC2C32A-6PC44C - 32-Macrocell 5.5ns CPLD | Xilinx

The Xilinx XC2C32A-6PC44C is a 32-macrocell CoolRunner-II complex programmable logic device with a nominal 5.5 ns pin-to-pin propagation delay, commercial temperature grade, and a 44-pin J-lead package. It combines a 32-cell CPLD architecture with 750 logic gates and a specified operating frequency of up to 200 MHz for compact, nonvolatile programmable-logic designs. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that bridges simple programmable logic arrays and higher-capacity FPGAs. Within the hardware hierarchy, a CPLD is a programmable-logic device, a semiconductor, and a compact alternative to a small FPGA. CoolRunner-II CPLDs use nonvolatile configuration technology, allowing a circuit to retain its programmed function after power is removed without requiring continuous configuration from an external memory. Key features of the XC2C32A-6PC44C include 32 macrocells, 750 gates, a 200 MHz maximum stated operating frequency, and a 5.5 ns pin-to-pin delay. Its commercial-grade designation supports applications that do not require automotive temperature qualification. The 44-pin package also provides a practical option for laboratory prototypes, industrial control equipment, embedded interface logic, and legacy control systems where larger programmable-logic packages would be unnecessary. The device belongs to the XC2C32A portion of the CoolRunner-II family, which was designed for low-power embedded logic and offers deterministic programmable behavior. Its 32 macrocells are useful for implementing state machines, address decoding, bus arbitration, control sequencing, data routing, and peripheral glue logic. Because CPLD configuration is nonvolatile, production equipment can operate without a configuration loader after the programmed pattern has been installed. Typical applications include industrial controller interface logic, automatic test equipment, instrumentation, communications equipment, embedded motor-control sequencing, and compact consumer or communications products. The commercial speed and temperature grades make the XC2C32A-6PC44C most suitable for controlled indoor environments rather than extended industrial-temperature or automotive programs. A critical design consideration is timing closure. Engineers should use the DS310 device data sheet and the relevant CoolRunner-II implementation guidance to evaluate every external path, including setup time, hold time, clock skew, and propagation delay. Board-level signal integrity and I/O loading also matter because the package alone does not guarantee reliable operation in a completed system. This product page combines the DS310 family data with package identification, realistic same-footprint alternatives, comparison parameters, application guidance, and PCB-focused design notes. It helps distinguish speed-grade substitutions from changes that would require a different footprint or a different programmable-logic architecture.

RFQ Contact
XC2C32A-6QFG32C - 32-Macrocell Low-Power CPLD | AMD
XC2C32A-6QFG32C

XC2C32A-6QFG32C - 32-Macrocell Low-Power CPLD | AMD

The AMD XC2C32A-6QFG32C is a 32-macrocell CoolRunner-II complex programmable logic device providing 750 system gates, 21 user I/O pins, and in-system programmability in a 32-pin QFN package. It is optimized for 1.8 V systems and supports multi-voltage I/O operation, while its 0.18 µm CMOS Flash architecture targets low-power programmable logic implementations. A CPLD, or complex programmable logic device, is a user-programmable semiconductor within the broader programmable-logic hierarchy. Unlike a mask-programmed logic device, a CPLD retains a configurable Flash architecture and can be programmed or reprogrammed to implement control, decoding, glue logic, and interface functions. The CoolRunner-II family combines nonvolatile configuration storage, macrocell-based logic, and a compact package suited to space-constrained embedded systems. Key features include as many as 32 macrocells, two function blocks, 21 available I/O, and 56 product terms per macrocell. The device is built on an advanced 0.18 µm CMOS Flash process and is optimized for 1.8 V systems. Its pin-to-pin logic delay can reach 3.8 ns, while another source identifies a 5.5 ns propagation delay for the -6 speed grade. A 32-pin QFN package with a 0.50 mm pitch keeps the component compact while supporting a 200 MHz-class implementation target. The XC2C32A combines a deterministic macrocell architecture with hot-pluggable PLA characteristics, broad product-term routing, and strong pinout retention. These characteristics make it useful when the design must tolerate configuration changes, preserve board-level assignments, or implement several related Boolean functions without using a larger FPGA. Its Flash-based configuration also allows the device to retain its programmed logic when power is removed. Typical applications include portable instrumentation, industrial control interfaces, peripheral bus decoding, display and keypad control, embedded system glue logic, and compact consumer electronics. The 21-I/O configuration is especially useful for designs that need moderate logic density, multiple independently routed signals, and low standby power rather than the extensive resources of an FPGA. When laying out a board, use the manufacturer's QFG32 pin-assignment table and preserve the exposed thermal-pad and ground requirements shown in the package drawing. Validate every I/O voltage against the selected bank and external-interface requirements. Programming tools, constraints, and any legacy software must also be checked against the CoolRunner-II support matrix before release. This page combines device specifications, lifecycle context, same-footprint alternatives, practical implementation guidance, and direct technical comparisons. It is intended to help engineers identify the correct CoolRunner-II option, plan a drop-in replacement, and avoid compatibility errors involving speed grade, package, or temperature range.

RFQ Contact
XC2C32A-6QFG32I - 32-Macrocell CPLD | AMD | Industrial
XC2C32A-6QFG32I

XC2C32A-6QFG32I - 32-Macrocell CPLD | AMD | Industrial

AMD XC2C32A-6QFG32I is a 32-macrocell CoolRunner-II complex programmable logic device with 21 user I/O, a 1.8 V optimized architecture, and a 32-pin QFN package with an exposed pad. The -6 speed grade and industrial -I temperature designation identify this configuration for designs requiring faster logic propagation and operation across an extended industrial temperature range. A CPLD, or complex programmable logic device, is a user-programmable semiconductor used to implement fixed digital functions through configurable logic blocks and programmable interconnect. A CPLD occupies the middle ground between simple programmable logic and larger FPGAs: it combines deterministic timing, nonvolatile configuration, and relatively low power consumption with logic integration suited to control, interface, and bus-adaptation functions. The XC2C32A family uses a 0.18 µm CMOS process architecture and provides 32 macrocells for state-machine, decoder, counter, control, and bus-interface logic. According to the AMD CoolRunner-II data sheet DS310, the family is optimized for 1.8 V systems. The device also supports in-system programming and lead-free, RoHS-compliant manufacturing, making it suitable for compact industrial control and embedded equipment. Timing performance depends on the specific speed grade, system implementation, and I/O path. The -6 suffix identifies the higher-performance family option relative to slower -4 and -5 grades, while the -I suffix identifies industrial-temperature treatment. Designers should evaluate propagation delay, setup and hold requirements, clock uncertainty, and output loading against the timing requirements of the target system rather than relying only on the family-level frequency figure. Typical uses include interface glue logic, portable embedded systems, control-plane logic, bus adaptation, industrial modules, and low-power programmable board-support designs. The CPLD can consolidate reset, interrupt, level translation, address decoding, and peripheral-interface functions without the power and complexity of a larger FPGA. The principal PCB consideration is exposed-pad thermal management. Place the QFN exposed pad over a thermal-via array and connect it to the system ground plane using the manufacturer land pattern. Input and output paths also require careful signal-integrity review, particularly when external buses, clock sources, or long board-level connections terminate at the device. This technical presentation combines the manufacturer data-sheet details, package characteristics, lifecycle considerations, same-family replacement options, and practical implementation guidance needed to evaluate the XC2C32A-6QFG32I during schematic design, PCB layout, sourcing, and production qualification.

RFQ Contact
XC2C32A-6VQ44I - 32-Macro-Cell CPLD | AMD | Glue Logic
XC2C32A-6VQ44I

XC2C32A-6VQ44I - 32-Macro-Cell CPLD | AMD | Glue Logic

The AMD XC2C32A-6VQ44I is a 32-macro-cell CoolRunner-II complex programmable logic device built on 0.18 µm CMOS technology for 1.8 V systems and supplied in a 44-pin VTQFP package. It provides 750 logic gates, up to 33 user I/O pins, a listed internal frequency of 450 MHz, and pin-to-pin propagation delays as fast as 3.0 ns. The -6 suffix denotes the device speed grade, while the I suffix identifies the industrial-temperature option in the ordering code. A complex programmable logic device, or CPLD, is a programmable-logic semiconductor used to implement fixed digital functions without changing the physical PCB. In the broader hierarchy, a CPLD is a programmable logic device, a member of the FPGA and CPLD category, and a type of semiconductor. CoolRunner-II devices combine nonvolatile configuration storage with programmable logic blocks, allowing a loaded design to operate without an external configuration PROM after programming. Key features of the XC2C32A include 32 macro cells, approximately 750 gates, CMOS operation at 1.8 V, and low quiescent current of as low as 12 µA. Its fast pin-to-pin logic performance makes it suitable for control logic, state machines, bus arbitration, interface adaptation, and startup sequencing. The device is optimized for 1.8 V systems, helping simplify connection to modern low-voltage processors, FPGAs, and memory devices. The listed internal frequency of 450 MHz describes the device’s internal timing capability rather than a guaranteed system-clock rate. External setup, hold, interconnect, and I/O timing still determine achievable board-level performance. A listed 4 ns propagation delay applies to a characterized logic path, while 3.0 ns is the fastest stated pin-to-pin logic delay; these figures should not be treated as identical timing conditions. Typical uses include portable equipment, industrial control modules, embedded systems, and general-purpose glue logic. Its nonvolatile configuration behavior supports deterministic power-up operation, while its relatively small 32-macro-cell array is most effective when the required Boolean logic is modest and deterministic. Designers should verify every signal against the DS310 pin table, confirm the selected system voltage and I/O standards, and avoid relying on the maximum internal frequency as an unconditional peripheral operating rate. Toolchain and programming-file compatibility must also be checked before transferring an existing CPLD design to this exact ordering code. This page consolidates manufacturer and distributor information, verified source links, practical design guidance, and clearly qualified replacement analysis. It also distinguishes documented performance claims from unavailable electrical details, helping engineers make a more reliable selection without introducing unverified specifications.

RFQ Contact
XC2C32A-6VQG44C - 32-Macrocell 1.8V CPLD | AMD
XC2C32A-6VQG44C

XC2C32A-6VQG44C - 32-Macrocell 1.8V CPLD | AMD

The AMD XC2C32A-6VQG44C is a 32-macrocell CoolRunner-II complex programmable logic device optimized for 1.8 V systems, with 33 I/O, a 3.8 ns pin-to-pin logic delay, and a 44-pin VQFP package. It combines programmable logic, in-system programmability, and low-power operation in a compact surface-mount package for embedded control and interface designs. A complex programmable logic device, or CPLD, is a user-programmable semiconductor within the FPGA and programmable-logic hierarchy. Unlike a fixed-function logic circuit, a CPLD combines nonvolatile configuration, macrocell-based logic, and programmable I/O in one device. The CoolRunner-II architecture targets designs that need deterministic logic density, compact implementation, and straightforward peripheral integration without the resource structure of a larger FPGA. Key features include 32 macrocells, 33 I/O, operation optimized for 1.8 V systems, and a 3.8 ns pin-to-pin delay. The device is manufactured using 0.18 µm CMOS technology and is identified as a 750-gate CoolRunner-II device. Its VQFP-44 surface-mount package supports compact PCB layouts while exposing the logic, power, ground, configuration, and I/O resources needed for compact control systems. The XC2C32A architecture supports in-system programming, allowing configuration behavior to be integrated into a larger embedded system. A reported 323 MHz operating frequency and 3.8 ns pin-to-pin delay indicate that the device is suited to control logic, bus arbitration, interface translation, state-machine implementations, and signal conditioning. These timing figures should be evaluated against the complete design because external-device and board-level timing also affect end-to-end performance. Typical uses include industrial control, power-management sequencing, automated equipment, embedded interfaces, and general-purpose logic consolidation. The device can combine multiple fixed functions into one programmable implementation, reduce the number of separate glue-logic ICs, and allow firmware-driven configuration changes when its memory and interface requirements align with the design. PCB design should preserve a clean supply path and route configuration signals away from sensitive logic. Review the AMD DS310 pin description and recommended decoupling requirements before assigning the PCB footprint, and confirm timing against the selected I/O standard and external circuitry rather than relying on the nominal frequency alone. This product page combines the CoolRunner-II device specifications, lifecycle information, verified source links, and engineering-focused replacement guidance to support component selection, PCB planning, and legacy-design maintenance.

RFQ Contact
XC2C32A-6VQG44I - 32-Macrocell 5.5ns CPLD | AMD/Xilinx
XC2C32A-6VQG44I

XC2C32A-6VQG44I - 32-Macrocell 5.5ns CPLD | AMD/Xilinx

AMD/Xilinx XC2C32A-6VQG44I is an in-system-programmable CoolRunner-II complex programmable logic device with 32 macrocells, 33 I/O pins, and a 5.5 ns maximum propagation delay, housed in a 44-lead VQFP surface-mount package. The -6 speed grade supports designs requiring deterministic combinational and registered logic performance, while the industrial-temperature ordering option targets industrial control and embedded equipment. A CPLD, or complex programmable logic device, is a user-programmable semiconductor that combines programmable logic fabric with non-volatile configuration storage. Its hierarchy is CPLD → programmable logic device → programmable logic IC → semiconductor. Compared with a small FPGA, a 32-macrocell CPLD is intended for compact glue logic, control logic, interface adaptation, and deterministic signal-processing functions rather than large system-level workloads. The XC2C32A provides 750 logic gates, 32 macrocells, and 33 I/O pins in a 10 x 10 mm VQFP package. It uses 0.18 μm CMOS technology, supports in-system programming through JTAG, and offers hot-pluggable PLA architecture. The manufacturer datasheet identifies the family as compatible with SSTL2_1 and SSTL3_1 product specifications and highlights 100% product-term routability across function blocks. CoolRunner-II architecture combines an interconnected programmable logic array with fast interconnect, allowing relatively compact designs to implement combinational equations, state machines, counters, address decoding, and control functions. In-system programmability permits configuration or reconfiguration without removing the device, supporting production programming, field updates, and board-level initialization workflows when the surrounding circuit and programming system are designed accordingly. Typical uses include industrial I/O expansion, legacy interface emulation, control-panel logic, peripheral interfacing, signal conditioning, and compact glue logic around microcontrollers or processors. The 33 available I/O pins provide enough interface density for bus steering, level conversion, status aggregation, and programmable control signals, while JTAG programming supports manufacturing test and engineering development. PCB implementation should preserve the manufacturer's recommended VQFP-44 footprint, power and ground distribution, decoupling arrangement, and JTAG interface. Because the CPLD is non-volatile, configuration is retained, but designers should still include suitable startup behavior and programming access for field updates. The -6 speed designation distinguishes timing grade rather than functional capacity. This page combines manufacturer specifications, package and programming details, verified drop-in alternatives, comparison parameters, and practical design guidance. It also distinguishes documented replacements from options that require different packages, speed grades, or device architectures, helping engineers evaluate PCB reuse without overlooking qualification and timing constraints.

RFQ Contact
XC2C384-10TQ144I - 384-Macrocell Industrial CPLD | AMD
XC2C384-10TQ144I

XC2C384-10TQ144I - 384-Macrocell Industrial CPLD | AMD

AMD XC2C384-10TQ144I is a CoolRunner-II complex programmable logic device with 384 macrocells, approximately 9,000 logic gates, and a maximum operating frequency of 217 MHz. The device uses a 1.8 V core and 0.18 µm process technology in a 144-lead TQFP package. Its part number identifies the 384-macrocell device, 10 ns speed grade, TQFP-144 package, and industrial temperature qualification. A CPLD is a programmable semiconductor that combines a configurable logic architecture with nonvolatile configuration memory. It sits between fixed-function logic and larger programmable devices: unlike a mask-programmed ASIC, a CPLD can be reconfigured for multiple board revisions, while unlike a soft-core FPGA approach, it provides a compact hardware implementation of Boolean and sequential logic. The XC2C384 belongs to the CoolRunner-II family and is categorized as a complex programmable logic device. The XC2C384's principal characteristics include 384 macrocells, approximately 9,000 gates, a 1.8 V core, and operation up to 217 MHz. Its programmable I/O resources support output slew-rate control, bus hold, pull-up, open-drain operation, programmable grounds, and per-input Schmitt-trigger capability. These features allow designers to address interface behavior, signal conditioning, and mixed voltage-domain implementation within a single reconfigurable device. The TQFP-144 package provides 144 external leads and is suitable for conventional surface-mount PCB assembly. A 10 ns speed designation identifies the performance grade, while the final I character denotes the industrial qualification option. Because CPLD timing includes both device performance and external routing, system-level timing should be evaluated against the manufacturer datasheet and the selected board implementation rather than inferred from the nominal frequency alone. Typical applications include industrial control, interface bridging, bus decoding, programmable timing, and compact embedded control logic. The 384-macrocell resource can consolidate multiple fixed-function PLDs into one programmable device, while the CoolRunner-II architecture supports design reuse across product variants and field upgrades when the configuration bitstream and board requirements are compatible. PCB planning should preserve the package outline, exposed thermal considerations, and recommended decoupling pattern from the manufacturer documentation. Designers should also verify every pin assignment against the selected package and UCF constraints before programming, especially when changing package suffix or temperature grade. This product record combines the AMD DS095 device documentation, exact-part distributor listings, same-family package alternatives, and practical guidance for CPLD migration. It is intended to help engineers identify the correct CoolRunner-II device, assess whether a candidate is a true pin-compatible replacement, and plan implementation before committing to a board layout or production program.

RFQ Contact
XC2C384-7FT256C - 384-Macrocell 7.1ns CPLD | AMD Xilinx
XC2C384-7FT256C

XC2C384-7FT256C - 384-Macrocell 7.1ns CPLD | AMD Xilinx

The AMD Xilinx XC2C384-7FT256C is a 384-macrocell CoolRunner-II complex programmable logic device with a 7.1 ns pin-to-pin propagation delay, 256-pin FTFBGA package, and 1.8 V supply operation. The device provides 240 user I/O pins and combines programmable logic with embedded static RAM for designs requiring flexible, nonvolatile configuration. A complex programmable logic device, or CPLD, is a programmable-logic semiconductor that belongs to the FPGA and CPLD category of programmable logic devices. Unlike a soft processor or fixed-function controller, a CPLD implements digital logic through user-programmed interconnect and macrocell resources. The CoolRunner-II architecture combines logic macrocells, programmable routing, and dedicated memory resources so control, decode, interface, and glue-logic functions can be consolidated into one device. The XC2C384 provides 384 macrocells, approximately 9,000 logic gates, and a maximum characterized system frequency of 217 MHz for the specified resettable-counter test. Its -7 speed grade is described by a 7.1 ns pin-to-pin delay. The 0.18-micron CMOS implementation is optimized for 1.8 V systems, while the device is identified as offering low quiescent current, with a listed minimum value of 14 A in the component specification summary. Programmable output features include slew-rate limiting, bus hold, pull-up, open-drain, and programmable-ground options. Inputs can use selectable Schmitt-trigger behavior on a per-pin basis, which helps improve noise tolerance in slower or less controlled external environments. Macrocell registers may also be configured as direct input registers, allowing selected external signals to be captured without using the normal combinational macrocell path. The XC2C384-7FT256C is suitable for industrial control, communications-interface, peripheral bridging, data-capture, and general-purpose embedded-logic designs. Its 240 user I/O pins provide substantial board-level connectivity, while the 256-ball FTFBGA package supports compact, high-pin-count implementations. Designers should base final frequency and power claims on timing analysis of the implemented design rather than the device-level maximum alone. For PCB implementation, follow the manufacturer ball map and recommended power, decoupling, and routing guidance exactly. Confirm the selected configuration file, pin assignments, I/O standards, voltage tolerances, and bank power requirements before release. The 7.1 ns speed grade can improve timing margin, but the complete design must still be analyzed for logic depth, routing congestion, and external component timing. This product summary combines the verified device characteristics, package and timing references, pricing availability, drop-in replacement findings, and practical implementation guidance. It highlights where the -7 grade differs from slower CoolRunner-II configurations and helps engineers distinguish a genuine PCB-compatible replacement from a merely similar CPLD.

RFQ Contact
XC2C384-7PQ208C - 384-Macrocell CPLD, 7.1ns | Xilinx
XC2C384-7PQ208C

XC2C384-7PQ208C - 384-Macrocell CPLD, 7.1ns | Xilinx

The AMD/Xilinx XC2C384-7PQ208C is a CoolRunner-II CPLD (Complex Programmable Logic Device) offering 384 macrocells, 240 user I/O pins, and a fast 7.1 ns pin-to-pin propagation delay, housed in a 208-pin PQFP (PQ208) surface-mount package optimized for 1.8V systems. A CPLD is a type of programmable logic device that combines a large number of macrocells with a programmable interconnect fabric, sitting in the system hierarchy between simple SPLDs (such as GAL and PAL devices) and full FPGAs. Unlike SRAM-based FPGAs, CoolRunner-II CPLDs configure instantly at power-up from on-chip flash, making them voltage regulators of glue logic: they replace many discrete 74-series logic ICs, perform address decoding, bus interfacing, and state-machine control with zero external configuration storage. Key features of the XC2C384-7PQ208C include its industry-leading 0.18 micron CMOS CPLD process, 7.1 ns pin-to-pin delay performance in the -7 speed grade, and quiescent current as low as 14 microamps, which makes it one of the lowest-power members of the programmable logic family. The 240 available user I/O provide high pin-count glue-logic integration, and the commercial temperature grade covers 0 C to +70 C. Architecturally, the CoolRunner-II family uses a fast, deterministic interconnect that avoids the variable routing delays of FPGA fabrics, so timing closure is straightforward: the 7.1 ns pin-to-pin figure holds across typical designs. The 1.8V core optimization reduces dynamic power dramatically compared with earlier 3.3V CPLD generations, while I/O banks tolerate standard logic levels for mixed-voltage board integration. Typical applications include address decoding and bus bridging in embedded systems, power-up configuration control for larger FPGAs, interface conversion between legacy and modern logic families, and portable or battery-powered designs where the 14 microamp standby current directly extends battery life. Design consideration: assign unused I/O as grounded outputs or inputs with termination per the manufacturer datasheet guidelines, and verify I/O bank voltage compliance before mixing 3.3V and 1.8V signals on the same bank. This page adds value beyond the manufacturer datasheet by synthesizing distributor availability, drop-in family alternatives with speed-grade trade-offs, and practical design notes in one place.

RFQ Contact
XC2C384-7TQ144C - 9K Gate 1.8V CPLD TQFP-144 | AMD/Xilinx
XC2C384-7TQ144C

XC2C384-7TQ144C - 9K Gate 1.8V CPLD TQFP-144 | AMD/Xilinx

The AMD (Xilinx) XC2C384-7TQ144C is a CoolRunner-II family CPLD (complex programmable logic device) with 9K system gates, 384 macro cells, a 7.1 ns pin-to-pin propagation delay and 14 uA quiescent current, housed in a 144-pin TQFP (TQ144) surface-mount package rated 0C to +70C. A CPLD is a class of programmable logic device that sits between SPLDs (such as GAL/PAL devices) and FPGAs in the programmable-logic hierarchy. CPLDs use a macro-cell-based architecture with a deterministic, fully-connected programmable interconnect, which means every signal path has a fixed, predictable delay. This makes CPLDs the preferred choice for glue logic, state machines, bus interfacing, power-up sequencing and address decoding, where pin-to-pin timing consistency matters more than raw gate count. Key features of the XC2C384-7TQ144C include its 1.8V supply optimization, which dramatically lowers dynamic power compared to 3.3V and 5V CPLD families, its 0.18-micron CMOS process that yields the industry-fastest 7.1 ns pin-to-pin delays for a low-power CPLD, and an ultra-low 14 uA quiescent current that suits battery-powered and always-on designs. The device offers up to 240 user I/O pins, giving designers extensive pin availability in a 0.5 mm-pitch 144-lead TQFP footprint. Architecturally, CoolRunner-II macro cells combine a programmable AND/OR logic array with configurable registers, supporting combinational and sequential functions per cell. The family is programmed via industry-standard JTAG and is supported by the AMD/Xilinx ISE design suite for synthesis, fitting and in-system programming. Typical applications include bus-interface translation and control, microprocessor glue logic, industrial control sequencing, communications line-card management and replacing multiple discrete logic devices to reduce board area and BOM count. For design, note that 1.8V I/O standards apply - confirm level compatibility with 3.3V host devices before committing the board, and follow the manufacturer datasheet for JTAG programming-chain requirements. This page synthesizes distributor availability data, drop-in family alternatives, comparison tables and practical design notes not found in the manufacturer datasheet alone.

RFQ Contact
XC2C512-7FTG256C - 512-Macrocell 1.8V CPLD | AMD
XC2C512-7FTG256C

XC2C512-7FTG256C - 512-Macrocell 1.8V CPLD | AMD

The AMD XC2C512-7FTG256C is a 512-macrocell CoolRunner-II complex programmable logic device with 12K system gates, a 1.8 V core supply, and 270 user I/O, housed in a 256-pin FTBGA package. It combines nonvolatile configuration storage, programmable logic, and in-system programmability for designs requiring fast configuration and flexible interface adaptation. A CPLD is a programmable logic device whose interconnected macrocells implement digital logic functions. CoolRunner-II devices use CMOS technology and embedded nonvolatile configuration memory, allowing a circuit to retain its programmed configuration without a separate program-memory device. Within the semiconductor hierarchy, the XC2C512 belongs to the programmable-logic family, bridging simple fixed-function logic and higher-capacity FPGA and CPLD architectures. The -7 speed designation identifies a 7 ns-class performance option, while the C suffix denotes the commercial temperature grade listed as 0°C to 70°C. Four independently powered output banks support interfacing with 1.5 V, 1.8 V, 2.5 V, and 3.3 V devices. DataGATE functionality can suppress output transitions and reduce switching activity, making the device useful in designs where controlled power behavior and signal integrity are important. The device contains 512 macrocells and is described as a 12K-gate CoolRunner-II CPLD. Its 0.18 µm CMOS implementation combines nonvolatile configuration with fast in-system programming. Although one distributor comparison lists a 128 MHz maximum operating frequency and another product summary lists 179 MHz, the speed grade itself is consistently identified as the 7 ns class. System timing should therefore be evaluated with the AMD DS096 datasheet and the selected design tool rather than inferred from a single catalog frequency value. Typical uses include industrial control interfaces, bus translation, protocol conversion, board-level glue logic, and compact embedded control systems. The four output banks simplify connections between low-voltage core logic and higher-voltage peripherals, while the large user-I/O count supports parallel buses, control registers, and multiple communication interfaces on a single device. PCB design should preserve the exact FTG256 footprint, route programming signals according to the AMD guidance, and provide the required core and bank supply rails. Designers should also validate signal integrity on high-speed outputs and include decoupling close to the package power pins. Because the package is a fine-pitch BGA, assembly capability, via geometry, solder-mask design, and thermal conditions require review before production release. This page consolidates the device identity, verified electrical and packaging facts, selection guidance, and engineering considerations needed to evaluate the XC2C512-7FTG256C against same-package CoolRunner-II options and broader programmable-logic families.

RFQ Contact
XC2C64A-5CP56C - 64-Macrocell 1.8V CPLD | AMD
XC2C64A-5CP56C

XC2C64A-5CP56C - 64-Macrocell 1.8V CPLD | AMD

The AMD XC2C64A-5CP56C is a 64-macrocell CoolRunner-II complex programmable logic device with a 4.6 ns maximum pin-to-pin propagation delay, 333 MHz internal frequency, and 45 user I/O pins. It is packaged in a 56-ball CSP/LFBGA measuring 6 x 6 mm with a 0.50 mm ball pitch and is optimized for 1.8 V systems. The device is a surface-mount, in-system programmable semiconductor that consolidates programmable Boolean logic, general-purpose I/O, and dedicated resources into one package. A complex programmable logic device, or CPLD, is a user-programmable digital logic device within the broader FPGA and CPLD category. Unlike a microprocessor, which executes software instructions, a CPLD directly implements combinational and sequential logic in hardware. Its nonvolatile configuration makes it suitable for control logic, interface adaptation, bus decoding, state machines, and industrial embedded systems that must retain their configured behavior after power removal. The XC2C64A family provides 64 macrocells and four logic elements or blocks, according to the indexed manufacturer-data summary. Its 4.6 ns speed grade supports deterministic logic operation, while the 45 user I/O pins provide connections to external digital systems. The device is specified as a CMOS CPLD, uses a 1.7 V to 1.9 V internal supply range, and is optimized around low-voltage 1.8 V system design. The reported 333 MHz internal frequency is distinct from the 4.6 ns propagation-delay grade. The -5 speed designation identifies the performance grade used for timing analysis and system design. The CP56C package designation identifies a 56-terminal, 6 x 6 mm, 0.50 mm-pitch surface-mount package. In-system programmability allows a board designer to configure the device through the programming interface, while nonvolatile configuration supports repeatable startup behavior. These characteristics make the part appropriate for compact control and interface logic rather than general-purpose software processing. Typical uses include industrial controller interface logic, data-acquisition and instrumentation control, communication-interface adaptation, embedded system glue logic, and general-purpose board support functions. In these applications, the 64 macrocells can implement multiple state machines, address decoders, latch logic, and protocol converters, while the 45 user I/O pins provide interfaces to sensors, converters, memories, and other digital peripherals. The 1.8 V optimization is especially relevant for modern low-voltage system rails. PCB implementation should follow the AMD CoolRunner-II package, pinout, and board-layout documentation exactly. Because the verified source summary confirms the package dimensions and ball pitch but does not provide the complete numbered ball assignment, designers must consult DS311 before assigning power, ground, configuration, and user I/O nets. Placement should also preserve the manufacturer-specified footprint, solder-mask, paste, and thermal-relief geometry. This page combines the verified distributor specifications, the manufacturer DS311 datasheet reference, packaging details, engineering guidance, and a transparent assessment of drop-in alternatives. Unlike a distributor listing that primarily records inventory and price, it distinguishes the device's 4.6 ns speed grade, 333 MHz internal frequency, 1.8 V supply range, macrocell count, and application constraints. It also identifies where additional design data is required rather than inferring an undocumented pinout or package drawing.

RFQ Contact
XC2C64A-5CPG56C - 64-Macrocell 1.8V CPLD | AMD
XC2C64A-5CPG56C

XC2C64A-5CPG56C - 64-Macrocell 1.8V CPLD | AMD

The AMD XC2C64A-5CPG56C is a CoolRunner-II complex programmable logic device with 64 macrocells, a 1.8 V supply, and 45 user I/O pins in a 6 x 6 mm, 0.50 mm-pitch CSP-56 package. It operates from a 1.8 V core supply and is designed for low-power, nonvolatile programmable logic in compact embedded systems. The -5 speed designation corresponds to a listed 263 MHz internal frequency, while individual path delays are characterized separately. A CPLD is a programmable logic device that combines programmable AND/OR logic structures with a nonvolatile configuration memory architecture. In the electronics hierarchy, a CPLD is a user-programmable digital semiconductor used for control logic, interface translation, decoding, state machines, and bus arbitration. Unlike a mask-programmed logic device, it can be configured after manufacture, while its nonvolatile configuration allows operation without continuously loading a program into volatile memory. The XC2C64A provides 64 logic macrocells and as many as 45 user I/O pins, making it suitable for designs that need substantially more routing flexibility than discrete gates. Its CMOS implementation uses 0.18 µm technology and targets 1.8 V systems. Listed features include a 4.6 ns fastest pin-to-pin logic delay and low quiescent current, supporting both general-purpose embedded control and low-power portable equipment. CoolRunner-II devices use a fast, deterministic interconnect architecture for logic-intensive designs. The architecture is particularly useful where the design must combine multiple state machines, address decoding, bus control, and data-path functions in one device. The XC2C64A combines a 1.5K-equivalent logic capacity with in-system programmability, allowing a prototype to be revised without changing the PCB when the configuration interface and power architecture remain unchanged. Typical applications include industrial control interfaces, portable instrumentation, embedded system glue logic, communication protocol conditioning, and compact consumer products. Its 45 I/O pins provide sufficient connectivity for parallel data interfaces and control signals, while the small package supports space-constrained board layouts. The CPLD should be paired with a compatible configuration device or supported in-system programming arrangement when a persistent configuration file is required. The principal design considerations are correct voltage sequencing, signal compatibility across the 1.8 V core domain, and careful treatment of the CSP-56 land pattern. The 0.50 mm ball pitch requires a PCB footprint and assembly process capable of fine-pitch component placement. Confirm pin assignments, configuration pins, power pins, and I/O standards against DS311 before fabrication. This product page combines the AMD CoolRunner-II device characteristics with package guidance, verified alternative references, and practical design notes. It helps engineers identify whether the XC2C64A-5CPG56C matches a 64-macrocell, 1.8 V, fine-pitch logic design and what must be checked before PCB release or replacement sourcing.

RFQ Contact
XC2C64A-5QFG48C - 64-Macrocell 1.8V CPLD | AMD Xilinx
XC2C64A-5QFG48C

XC2C64A-5QFG48C - 64-Macrocell 1.8V CPLD | AMD Xilinx

AMD Xilinx XC2C64A-5QFG48C is a CoolRunner-II complex programmable logic device with 64 macrocells, 37 I/O, and a 1.8 V operating supply in a 48-pin QFN exposed-pad package. It delivers up to 263 MHz performance, uses 0.18 µm CMOS technology, and provides approximately 1.5K logic gates. The device supports in-system programming and is optimized for low-voltage systems. A CPLD is a programmable logic device that retains its configuration in nonvolatile memory and combines configurable logic with dedicated input and output resources. In the device hierarchy, a CPLD sits between simple programmable logic and an FPGA: it offers faster deterministic routing for moderate logic-density designs while providing nonvolatile configuration, lower system complexity, and a familiar PCB footprint. The XC2C64A family provides up to 4.6 ns pin-to-pin logic delays and supports 1.8 V systems. Its low 15 A quiescent current is suitable for power-conscious embedded equipment. In-system programming allows configuration or field updates without removing the device from its circuit, while the 64-macrocell architecture accommodates control logic, interface adaptation, state machines, and fixed-footprint hardware customization. The 0.18 µm CMOS implementation combines nonvolatile configuration storage with deterministic CPLD timing. The -5 suffix identifies a particular speed grade, while QFG48C identifies the 48-lead QFN exposed-pad package and commercial temperature designation. The exposed pad supports heat transfer from the device to the PCB, making copper placement and thermal analysis important in compact embedded systems. Typical applications include industrial control, embedded instrumentation, communications-interface adaptation, low-voltage consumer electronics, and compact control systems. A 37-I/O device can connect processors, sensors, memory interfaces, status indicators, and discrete I/O when the design does not require the capacity or routing flexibility of a larger FPGA. The primary design consideration is maintaining a clean 1.8 V rail and providing adequate thermal copper beneath the exposed pad. Confirm timing constraints for every external path, reserve configuration pins for their designated functions, and validate all I/O standards against the AMD DS311 device data sheet before layout release. This product page organizes the XC2C64A electrical identity, package details, drop-in alternatives, comparison criteria, and PCB-design guidance for engineers evaluating legacy CPLD upgrades and second-source sourcing.

RFQ Contact
XC2C64A-5VQ100C - 64-Macrocell 1.8V CPLD TQFP-100 | AMD Xilinx
XC2C64A-5VQ100C

XC2C64A-5VQ100C - 64-Macrocell 1.8V CPLD TQFP-100 | AMD Xilinx

The AMD (Xilinx) XC2C64A-5VQ100C is a CoolRunner-II Complex Programmable Logic Device (CPLD) with 64 macrocells, 1,500 usable gates, a 4.6 ns pin-to-pin logic delay, and up to 45 user I/O pins, housed in a 100-pin very thin quad flat package (VQFP-100 / TQFP-100) operating from a 1.8 V core supply. A CPLD (Complex Programmable Logic Device) is a class of programmable logic IC that sits between simple SPLD devices such as GAL/16V8 parts and full FPGAs in the programmable logic hierarchy. CPLDs provide deterministic, pin-to-pin timing for glue logic, state machines, bus interfacing, and power-on configuration control, and are non-volatile - the design is retained through power cycles without external configuration memory. Key features of the XC2C64A include the industry-leading 0.18 micron CMOS process optimized for 1.8 V systems, as low as 15 uA quiescent current, internal frequencies up to 333 MHz, and in-system programmability (ISP). The CoolRunner-II architecture delivers extremely low dynamic power because it uses a true 1.8 V core rather than 3.3 V or 5 V legacy cores, making it well suited to battery-powered and thermally constrained designs. Technically, the XC2C64A provides 4 function blocks containing 16 macrocells each, supporting both combinational and registered logic with synchronous and asynchronous resets. The -5 speed grade offers 4.6 ns pin-to-pin delay and 263 MHz system toggle performance, with DataGate and CoolPower technologies further reducing active power. Schmitt-trigger inputs, optional dual-DATA-gate inputs, and 3.3 V-tolerant I/O standards through level-shifting ease mixed-voltage system integration. Typical applications include glue logic consolidation in embedded systems, power-up sequencing and FPGA configuration control, address decoding, bus bridging, portable and battery-operated instrumentation, and industrial control boards where deterministic timing and non-volatile logic are required. Design consideration: the 1.8 V core supply requires a clean, well-decoupled rail; I/O banks may interface to 3.3 V systems, but check the DS311 datasheet I/O standard selection in your tools before committing pin assignments. This page synthesizes distributor listings, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Contact
XC2C64A-5VQ44C - 4.6ns 64-Macrocell CPLD | AMD
XC2C64A-5VQ44C

XC2C64A-5VQ44C - 4.6ns 64-Macrocell CPLD | AMD

AMD Xilinx XC2C64A-5VQ44C is a 64-macrocell CoolRunner-II complex programmable logic device with a 4.6 ns pin-to-pin logic delay, a 333 MHz internal frequency, and a 44-pin VQFP package. It is a CMOS programmable logic device intended for deterministic signal processing, communications, industrial automation, and custom hardware acceleration. The -5 speed designation identifies the 4.6 ns performance grade, while the 44-pin package supports compact, surface-mount PCB implementations. A CPLD is a programmable logic device that combines programmable AND/OR logic structures with non-volatile configuration memory. The XC2C64A belongs to the CoolRunner-II CPLD hierarchy, which sits between fixed-function logic and larger field-programmable gate arrays. It is useful when a design needs deterministic propagation timing, in-system reconfiguration, and a modest logic-cell count without the complexity of an FPGA or processor-based implementation. The device provides 64 macrocells and approximately 1.5K gates according to the verified product data. Its 4.6 ns pin-to-pin delay supports moderate-speed control, decode, glue-logic, and interface tasks. The listed 333 MHz internal frequency provides additional timing context, while its optimized 1.8 V architecture targets modern low-voltage digital systems. A 15 A quiescent-current figure appears in the supplied specification extract, although the intended operating supply details should be confirmed in the manufacturer datasheet before power budgeting. Typical uses include communications equipment, industrial automation, real-time signal processing, bus-interface control, data-capture front ends, and embedded control logic. The CPLD is particularly suitable for deterministic designs requiring several interconnected state machines, protocol converters, or glue-logic functions around microcontrollers and processors. Its macrocell architecture also allows designers to consolidate small controller sections into one programmable device rather than using several unrelated fixed-function ICs. Designers should verify power-supply voltage, I/O standards, available package variants, and acquisition-file compatibility in the DS311 device documentation. PCB layouts should preserve adequate ground and power distribution, and unused inputs must be handled according to the manufacturer guidelines. This page synthesizes the supplied specifications, sourcing information, speed-grade alternatives, and design guidance into a compact engineering reference for the XC2C64A-5VQ44C.

RFQ Contact
XC2C64A-5VQG44C - 64-Macrocell 1.8V CPLD | AMD Xilinx
XC2C64A-5VQG44C

XC2C64A-5VQG44C - 64-Macrocell 1.8V CPLD | AMD Xilinx

The AMD Xilinx XC2C64A-5VQG44C is an in-system-programmable CPLD with 64 macrocells, 33 user I/O pins, and a 4.6 ns pin-to-pin logic delay, housed in a 44-pin VTQFP package. It is manufactured in 0.18 µm CMOS and optimized for 1.8 V systems. A complex programmable logic device is a programmable semiconductor used to implement fixed or time-varying digital logic. Within the semiconductor hierarchy, a CPLD occupies the position between simple programmable logic arrays and more complex programmable logic devices. It combines nonvolatile in-system programmability with deterministic logic timing and a compact package suited to control, interface, glue-logic, and low-power embedded applications. The CoolRunner-II architecture provides 64 macrocells, approximately 1.5K equivalent gates, and a maximum operating frequency listed as 159 MHz. The -5 speed designation corresponds to the 4.6 ns pin-to-pin delay, while the G44 suffix identifies the 44-pin package and C identifies the commercial temperature grade. The device also supports 1.8 V-oriented operation and has a low quiescent current specification of approximately 15 µA. The XC2C64A family is designed for compact implementations that require several digital functions without loading a larger programmable logic device. Its macrocell-based architecture provides predictable routing delays and nonvolatile configuration retention. The in-system programming capability allows configuration signals, logic behavior, or board-level production programming to be managed without relying on a separate mask-programmed device. Typical uses include industrial control and automation, communication equipment, portable and battery-operated electronics, interface control, display control, and embedded system support logic. The 33 available I/O pins allow the device to implement parallel data paths, control signals, state machines, and peripheral glue logic while conserving board area. Its low quiescent current is particularly useful when the system spends substantial time in a low-power state. PCB design should preserve the manufacturer-specified decoupling and programming-interface layout. Place the input, output, and configuration bypass capacitors close to their associated pins, route programming signals away from sensitive high-speed nodes, and provide a clean ground reference beneath the device. Confirm voltage compatibility for every connected bank because the 1.8 V optimization describes the intended design point rather than a blanket permission to use any I/O voltage. This product record combines the DS311 device specifications, package and speed-grade details, sourcing information, and application-oriented design guidance to support CPLD selection, PCB implementation, and replacement planning.

RFQ Contact