Products (44,000+)

XC2C64A-7CP56C - 64-Macrocells, 1.8V CPLD | AMD
XC2C64A-7CP56C

XC2C64A-7CP56C - 64-Macrocells, 1.8V CPLD | AMD

The AMD XC2C64A-7CP56C is a 64-macrocells, 1.8 V CoolRunner-II complex programmable logic device with a 333 MHz internal frequency, 4.6 ns pin-to-pin logic delay, 45 user I/Os, and a 56-pin CSP package. Its 0.18 µm CMOS implementation targets compact, low-power programmable logic systems where deterministic routing and nonvolatile configuration are more important than FPGA-level capacity. A complex programmable logic device, or CPLD, is a user-programmable semiconductor within the broader programmable-logic hierarchy. It combines multiple logic macrocells, programmable interconnect, and I/O blocks into a relatively small device. Compared with a field-programmable gate array, the XC2C64A is intended for designs with moderate logic density, simpler timing analysis, and rapid in-system reconfiguration. Its CoolRunner-II architecture combines configurable logic with low-power operation for 1.8 V systems. The XC2C64A provides 64 macrocells, 45 user I/Os, a 333 MHz internal frequency, and a listed 5 ns propagation delay. Its optimized 1.8 V architecture, as fast as 4.6 ns pin-to-pin logic delays, and as low as 15 µA quiescent current make it useful in compact control, interface, and glue-logic designs. The CSBGA-56 package reduces board area but requires careful ball-layout and assembly planning. The device uses a 0.18 µm CMOS process and belongs to the CoolRunner-II product family. The 64 macrocells provide substantially more logic capacity than basic switch-mode PAL devices while retaining a comparatively simple programmable architecture. The supplied source data identifies a 333 MHz internal frequency, 45 user I/Os, a 5 ns propagation-delay listing, and the 4.6 ns pin-to-pin performance figure, making this part suitable for deterministic control logic operating from a 1.8 V supply. Typical applications include industrial control and automation, embedded interface logic, protocol conversion, bus arbitration, power sequencing, and compact communications equipment. It can also implement glue logic around processors, ASICs, or larger programmable devices. In these applications, the 64-macrocells provide enough logic capacity to consolidate small control functions, while the 45 I/Os support mixed digital connections within a space-constrained board area. The principal design consideration is package and power planning. Because the part uses a 56-ball CSP rather than a leaded package, its footprint must match the exact CSBGA land pattern, and assembly must account for ball pitch, solder mask, paste stencil, and inspection requirements. Designers should also confirm the complete pin assignment and supported I/O standards against DS311 before schematic capture; complete pin names were not included in the supplied verified excerpts. This page consolidates the supplied manufacturer and distributor information, separates documented specifications from missing data, compares same-family replacement options, and adds practical package-selection guidance. It is intended to complement, not replace, the official XC2C64A CoolRunner-II CPLD data sheet and the device configuration, timing, and package design files required for production implementation.

RFQ Contact
XC2C64A-7CP56I - 64-Macrocell 333 MHz CPLD | AMD
XC2C64A-7CP56I

XC2C64A-7CP56I - 64-Macrocell 333 MHz CPLD | AMD

AMD XC2C64A-7CP56I is a 64-macrocell CoolRunner-II complex programmable logic device with a 333 MHz internal frequency, 5 ns stated propagation delay, 45 user I/Os, and a 6 x 6 mm CSP-56 package. It is optimized for 1.8 V systems and combines in-system programmability with CMOS programmable logic in a surface-mount package. A CPLD is a programmable logic device that converts stored configuration data into digital logic functions. In the semiconductor hierarchy, a CPLD sits between basic programmable logic arrays and more complex FPGAs, combining macrocell-based logic with dedicated programmable interconnect. The CoolRunner-II family is designed for compact control, interface, glue-logic, and signal-processing designs where deterministic timing, modest logic capacity, and low system complexity are important. The device provides 64 macrocells, 4.6 ns pin-to-pin logic delays, and a maximum 6.7 ns propagation-delay specification for the -7 speed grade. Its 1.7 V to 1.9 V internal supply range targets low-voltage systems, while the quoted 15 A quiescent current and optimized 1.8 V architecture support compact, power-conscious industrial equipment. The CP-56 package supplies 56 terminals for power, configuration, control, and 45 user I/O functions. The -7 speed grade provides a practical balance between timing and component selection: it is specified at a 333 MHz internal frequency while maintaining a smaller logic delay than slower general-purpose alternatives. The A designation identifies the CoolRunner-II architecture generation, while the ordering suffix identifies package, temperature, and speed characteristics that must be checked against the manufacturer's device documentation before a design is released. Typical uses include industrial controller interface logic, data-acquisition modules, programmable glue logic, communications adapters, embedded control, and low-voltage equipment requiring in-system reconfiguration. In each case, the 64 macrocells provide enough logic density for parallel control, state-machine, and interface functions without the resource allocation and complexity of a larger FPGA. PCB design should preserve the manufacturer's recommended power and ground distribution, place bypass capacitance close to the supply pins, and route high-speed or sensitive signals with controlled impedance where applicable. Because the verified public data identifies a CSP-56 package but does not provide a complete authoritative pin table, engineers should obtain DS311 and confirm every pin, termination, and test condition before layout release or replacement qualification. This product record combines verified distributor availability, a distributor price as of 2026-10-29, same-package CoolRunner-II alternatives, and practical selection guidance. It adds engineering context around speed grade, package constraints, programming compatibility, and qualification risk without replacing the complete manufacturer datasheet.

RFQ Contact
XC2C64A-7CPG56C 64-Macrocell Low-Power CPLD | AMD
XC2C64A-7CPG56C

XC2C64A-7CPG56C 64-Macrocell Low-Power CPLD | AMD

The AMD XC2C64A-7CPG56C is a 64-macrocell CoolRunner-II complex programmable logic device built on 0.18 μm CMOS technology for low-power, 1.8 V system designs. It provides 45 user I/O pins in a 56-pin CSBGA package and supports in-system programming. The family is optimized for control-plane logic, protocol adaptation, bus interfacing, industrial modules, and compact board-support designs where deterministic programmable logic is needed without the complexity of an FPGA. A CPLD is a programmable-logic semiconductor that converts Boolean equations and state-machine logic into a fixed interconnect and logic structure. Within the broader hierarchy, a CPLD is a programmable-logic device, a digital semiconductor, and a flexible alternative to mask-programmed logic. Its nonvolatile configuration allows the same board to support firmware revisions, interface options, and product variations without replacing the device. Key features of the XC2C64A-7CPG56C include 64 macrocells, 45 user I/O pins, 1.8 V operation, 1.5K logic gates, and a 0.18 μm CMOS process. The -7 speed designation corresponds to a 6.7 ns pin-to-pin delay according to the listed component description, while family literature identifies performance as fast as 4.6 ns and approximately 159 MHz. Quiescent current is listed as low as 15 A, although the current unit should be confirmed against the manufacturer datasheet before using it in a power budget. The architecture uses interconnected macrocells with a programmable AND-array and OR-array structure. This architecture favors compact synthesis of decoders, state machines, bus logic, address decoding, and interface glue logic. Its low-power 1.8 V orientation is useful in systems where the CPLD interfaces with modern low-voltage logic and consumes limited standby power. In-system programming supports configuration updates during manufacturing, test, or field maintenance. Typical applications include industrial control panels, communication adapters, sensor and actuator interfaces, instrumentation, embedded protocol bridges, and general-purpose board-support logic. The 45 available I/O pins make it appropriate for parallel data paths, control signals, and mixed external interfaces. Unlike a software processor, the CPLD executes deterministic hardware logic immediately after configuration and does not depend on firmware execution time. Designers should verify the ball assignments, power rails, configuration pins, and I/O standards against DS311 before layout release. The 56-ball CSBGA package requires careful escape routing, adequate ground distribution, and assembly-process control. Confirm the exact temperature grade, AC and DC timing limits, supported I/O voltage combinations, and power consumption under the intended workload. This page combines the AMD manufacturer data sheet, distributor listings, lifecycle cross-reference information, and application-oriented engineering guidance. It also distinguishes documented pin-for-pin replacements from broader CPLD alternatives that use different packages or architectures and therefore are not true drop-in choices.

RFQ Contact
XC2C64A-7CPG56I - 64-Macrocell 159MHz CPLD | AMD
XC2C64A-7CPG56I

XC2C64A-7CPG56I - 64-Macrocell 159MHz CPLD | AMD

The AMD XC2C64A-7CPG56I is a CoolRunner-II complex programmable logic device with 64 macrocells, approximately 1.5K logic gates, and a maximum specified operating frequency of 159 MHz, housed in a 56-pin CSBGA package. It uses 1.8 V technology and provides a compact, nonvolatile programmable-logic platform for control, interface, glue-logic, and signal-processing designs. A CPLD is a user-programmable semiconductor that combines macrocell-based logic with a fixed internal interconnect structure. In the semiconductor hierarchy, a CPLD sits between discrete gate arrays and FPGAs: it offers predictable timing, electrically erasable nonvolatile configuration, and relatively simple design flows. The CoolRunner-II architecture provides deterministic routing and SRAM-based configuration, allowing a design to retain its programmed logic without continuous configuration refresh. The XC2C64A provides 64 macrocells and approximately 1.5K gates, making it suitable for moderate-complexity state machines, bus controllers, address decoding, protocol bridges, and board-level control functions. Its specified 159 MHz operating frequency supports timing designs where system-level propagation delay and clock constraints must remain predictable. The -7 designation identifies its speed grade, while the I suffix identifies the industrial-temperature option. The device is manufactured in 0.18 μm CMOS technology and operates from a 1.8 V core supply. Its 56-pin CSBGA package supports compact, high-density PCB layouts, but its fine-pitch ball assignment requires careful PCB design, assembly capability, and inspection. Unlike a large FPGA, the XC2C64A is intended for smaller logic functions where low device count, compact packaging, and fast configuration are more important than very high logic density. Typical uses include industrial controller logic, embedded peripheral interfacing, programmable signal conditioning, sensor aggregation, and compact embedded systems. The device can also implement boot logic, power sequencing, watchdog handling, interrupt arbitration, and communication-interface state machines alongside a host microcontroller. Its 64-macrocell capacity should be checked against the required I/O count, register usage, and logic equations during architecture selection. PCB implementation should allocate the CSBGA footprint, ball map, power planes, decoupling capacitors, and programming-interface access according to the manufacturer pin description and package drawing. Signal routing must preserve the intended clock topology, while unused inputs require appropriate treatment. Configuration should also be validated for every power state and startup sequence before the design enters production. This page combines the CoolRunner-II device characteristics, verified technical sources, lifecycle information, package considerations, and same-package replacement guidance to support faster component selection and hardware planning.

RFQ Contact
XC2C64A-7PC44C - 64-Macrocell 159MHz CPLD | AMD
XC2C64A-7PC44C

XC2C64A-7PC44C - 64-Macrocell 159MHz CPLD | AMD

The AMD Xilinx XC2C64A-7PC44C is a 64-macrocell CoolRunner-II complex programmable logic device with a 159 MHz performance rating, 1.8 V core supply, and a 44-pin PLCC package. It belongs to the CPLD hierarchy, combining programmable nonvolatile logic, embedded memory, and flexible I/O in a single reconfigurable device for compact control, interface, and glue-logic designs. A CPLD is a user-programmable digital logic device that combines nonvolatile configuration storage with deterministic logic structures. Unlike a mask-programmed fixed ASIC, a CPLD can be reprogrammed during development or field updates. The CoolRunner-II family also uses low-power design features and interconnected architecture to support portable equipment, industrial controls, communications equipment, and general-purpose embedded systems. The XC2C64A offers 64 macrocells for implementing combinational and sequential logic. According to the AMD CoolRunner-II XC2C64A data sheet, DS311, the device uses 0.18 µm CMOS technology and supports a 1.8 V core voltage. The -7 designation identifies the performance-grade option, while the PC44 suffix identifies the commercial-temperature 44-pin package configuration. The package is designed for surface-mount PCB assembly. The device is useful when design requirements are stable but not sufficiently large to justify an FPGA. Its macrocell-based logic and dedicated I/O structures provide a practical platform for state machines, bus arbitration, protocol bridges, keypad scanning, display control, and glue logic. Because the configuration is retained in nonvolatile memory, the implemented logic remains available after power is removed and restored. Typical implementations include industrial controller front ends, portable instrument interfaces, communications equipment, embedded control logic, and compact consumer products. Design teams can use the same 44-pin footprint for equivalent CoolRunner-II sourcing options while preserving the programmed bitstream, provided the replacement suffix and electrical conditions have been checked against DS311. Careful hardware design begins with the device pinout, power architecture, and termination requirements in DS311. Confirm all 44 package contacts, supply connections, and I/O standards on the current pin-description table before routing the PCB. Treat the configuration interface and JTAG behavior as critical design constraints because incorrect pin assignment or signal conditioning can prevent programming even when the rest of the logic is electrically correct. This page combines the device identity, manufacturer documentation, package information, sourcing references, same-footprint alternatives, and practical engineering guidance. It focuses on the decisions an engineer must make before programming or qualifying the XC2C64A-7PC44C in production equipment.

RFQ Contact
XC2C64A-7PCG44C - 64-Macrocell 1.8V CPLD | Xilinx
XC2C64A-7PCG44C

XC2C64A-7PCG44C - 64-Macrocell 1.8V CPLD | Xilinx

The Xilinx XC2C64A-7PCG44C is a 64-macrocell CoolRunner-II complex programmable logic device operating from a 1.8 V core supply, with a 44-pin PLCC package. The -7 speed grade provides a stated 7.5 ns propagation delay and supports operation up to 200 MHz, while the commercial-grade ordering code identifies a 0°C to 70°C operating range. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines nonvolatile configuration storage, programmable logic, and dedicated I/O resources in one package. CPLDs belong to the programmable-logic-device hierarchy alongside FPGAs, but they are generally selected when short system-level timing paths, deterministic configuration behavior, and relatively simple integration are more important than very high logic capacity. The XC2C64A provides 64 macrocells and 33 I/O lines. Its 1.8 V core supply supports portable, embedded, communication, and industrial control equipment, and its nonvolatile FLASH configuration allows the programmed logic design to remain available after power is removed. The 7.5 ns speed designation supports clocked designs operating up to 200 MHz according to the product listing. Programmable logic density and I/O availability make this device suitable for bus arbitration, state machines, interface translation, control sequencing, and glue logic. Its 44-pin PLCC package reduces board area compared with larger leaded devices and provides a practical option for designs that require reworkability or socket assembly. Typical uses include industrial controllers, communications equipment, low-power embedded systems, peripheral interfaces, and general-purpose logic consolidation. JTAG boundary-scan testing supports board-level validation, while in-system programmability allows configuration and diagnostics to be integrated into a production or field-update workflow. PCB design should preserve the package pad layout, power and ground distribution, and programming interface exactly as specified in the manufacturer pinout. Decoupling capacitors should be placed close to the supply pins, and JTAG signals should be routed to remain accessible for boundary-scan testing and configuration. This page combines the manufacturer device data with package, programming, and replacement guidance, adding practical selection context for engineers who need a compact, nonvolatile CPLD rather than a higher-capacity FPGA.

RFQ Contact
XC2C64A-7PCG44I - 64-Macrocell 7ns CPLD | Xilinx
XC2C64A-7PCG44I

XC2C64A-7PCG44I - 64-Macrocell 7ns CPLD | Xilinx

The Xilinx XC2C64A-7PCG44I is a CoolRunner-II complex programmable logic device with 64 macrocells, approximately 1,500 usable gates, a -7 speed grade, and 33 user I/O pins in a 44-pin VQFP package. It combines advanced CMOS programmable logic with intelligent power-management features for designs requiring compact, low-power implementation of control, interface, and glue logic. A complex programmable logic device is a programmable semiconductor that combines a structured logic architecture with nonvolatile configuration storage. In the programmable-logic hierarchy, a CPLD sits between simple fixed-function logic and an FPGA: it offers macrocell-based logic implementation, predictable interconnect delays, and retained configuration in a compact package. The XC2C64A belongs to the CoolRunner-II family, designed for both high-performance and low-power portable equipment. The device provides 64 macrocells and approximately 1,500 usable gates, with 33 user I/O pins available in the PCG44 package. The -7 suffix identifies the higher-performance speed grade. Its I/O architecture supports LVCMOS operation in 3.3 V, 2.5 V, and 1.8 V systems, while 1.5 V compatibility can be achieved by using Schmitt-trigger inputs. Intelligent power management helps reduce consumption when the device is inactive. CoolRunner-II architecture uses configurable logic blocks and dedicated interconnect resources, making routing behavior more predictable than in a general-purpose FPGA. This characteristic is useful for control logic, bus arbitration, state machines, address decoding, and peripheral glue where a modest logic capacity is sufficient but deterministic implementation remains important. The PCG44 package also supports compact board layouts where a larger FPGA would be unnecessary. Typical applications include industrial controller logic, low-power handheld equipment, communications interfaces, test and measurement systems, and embedded control subsystems. The 33 user I/O count makes the device suitable for parallel buses, status and control registers, clock distribution, and programmable signal conditioning when external fixed-function logic would otherwise consume more board area. PCB design should follow the package dimensions, exposed-pad or thermal requirements, and recommended decoupling shown in the AMD datasheet. Confirm pin assignments, voltage domains, and supported I/O standards in the pin-description table before routing. Programming must use a compatible CoolRunner-II device programmer and the appropriate design file. This page combines the XC2C64A-7PCG44I family architecture, package details, verified replacement relationships, and practical selection guidance. It also highlights the distinctions between speed grades and temperature suffixes so engineers can identify a pin-compatible replacement without overlooking device-level qualification requirements.

RFQ Contact
XC2C64A-7QFG48C - 64-Macrocell 1.8V CPLD | AMD
XC2C64A-7QFG48C

XC2C64A-7QFG48C - 64-Macrocell 1.8V CPLD | AMD

The AMD XC2C64A-7QFG48C is a CoolRunner-II complex programmable logic device with 64 macrocells, approximately 1.5K logic gates, a 159 MHz maximum operating frequency, and a 1.8 V supply in a 48-pin QFN package with an exposed pad. It is optimized for 1.8 V systems and combines in-system programmability with low-power operation. A CPLD is a programmable logic device that connects combinational and sequential logic blocks through a programmable interconnect. The CoolRunner-II architecture belongs to the broader hierarchy of programmable logic devices, alongside FPGAs, and is commonly used for glue logic, interface adaptation, control sequencing, and compact system-level logic. Compared with a large FPGA, the XC2C64A provides a smaller logic capacity with relatively simple configuration and predictable device organization. Key features include 64 macrocells, 37 user I/O, 4.6 ns pin-to-pin logic delay, and quiescent current as low as 15 A. The device uses 0.18 µm CMOS technology and supports a 1.8 V operating supply. Its in-system programmable architecture allows a circuit to be configured or reconfigured without removing the package from the assembled PCB, which supports production programming, prototype updates, and field-configurable logic. The CoolRunner-II implementation provides dedicated macrocell resources for registered and combinational functions. Its documented 159 MHz speed classification and 4.6 ns pin-to-pin delay suit moderate-frequency control, bus, and interface designs. Because the XC2C64A is a legacy programmable-logic product, designers should verify the programmed bitstream, I/O standards, system-level timing, and toolchain support against the current AMD design flow before committing a new production design. Typical applications include low-speed communications interface control, industrial automation modules, embedded control systems, automotive electronic subsystems, consumer equipment, and compact peripheral adapters. The 48-pin QFN exposed-pad package also makes the device suitable for space-constrained boards where a larger plastic quad flat package would be undesirable. Thermal performance depends on the exposed-pad layout, copper area, and the aggregate switching activity of the programmed logic. For PCB implementation, use the package drawing and pin-description table in the DS311 manufacturer datasheet for land patterns and signal assignments. Connect the exposed pad to the appropriate ground plane, place decoupling capacitors close to the supply pins, and keep programming and configuration interfaces away from sensitive analog or high-speed clock routing. Validate signal integrity with the actual board stack-up and the selected I/O standard. This product page consolidates the manufacturer specifications, package details, application guidance, and traceable replacement analysis for the XC2C64A-7QFG48C. It is intended to help engineers evaluate the device, confirm the exact ordering code, and plan a technically compatible design or migration path.

RFQ Contact
XC2C64A-7QFG48I - 64-Macrocell CoolRunner-II CPLD, 7ns | AMD/Xilinx
XC2C64A-7QFG48I

XC2C64A-7QFG48I - 64-Macrocell CoolRunner-II CPLD, 7ns | AMD/Xilinx

The AMD/Xilinx XC2C64A-7QFG48I is a 64-macrocell, 1.8V CoolRunner-II Complex Programmable Logic Device (CPLD) with 4.6 ns pin-to-pin propagation delay, housed in a 48-pin QFG (QFN) surface-mount package. The device belongs to the CoolRunner-II family, which combines low static power (~15 µA quiescent current) with non-volatile flash configuration memory and in-system programmability via IEEE 1149.1 JTAG. A CPLD (Complex Programmable Logic Device) is a non-volatile, instant-on programmable logic device that sits between discrete glue logic and FPGAs in the programmable logic hierarchy (CPLD -> PLD -> programmable logic -> digital IC -> semiconductor). CoolRunner-II devices implement logic in function blocks based on PLA (Programmable Logic Array) sub-blocks with macrocell flip-flops, providing deterministic timing that simplifies design sign-off in glue-logic applications. Key features of the XC2C64A-7QFG48I include 64 macrocells organized as 4 logic blocks of 16 macrocells, 33 usable I/O pins (out of 37 total), 1.5K usable gates, a pin-to-pin delay of 4.6 ns at industrial temperature range, and DataGATE technology for per-pin input signal blocking to reduce dynamic power. The 0.18 µm CMOS process enables 1.8V core operation with I/O tolerance to 3.3V signals, simplifying interfacing with legacy 3.3V peripherals. The architecture combines a deterministic timing model with low-power 1.8V operation, making this CPLD well-suited for portable and battery-powered designs. The internal 1.8V VCCINT and I/O banked VCCIO supply rails permit mixed-voltage signaling without external level shifters, while the four global clock networks and per-macrocell OE controls give designers flexible clocking and bus-management options. Typical applications include portable/battery-powered consumer electronics where low quiescent current matters, industrial control I/O expansion and bus bridging (I2C, SPI, UART glue logic), and telecom infrastructure glue logic interfacing 3.3V peripherals to 1.8V processors. Designers also deploy this part in medical handheld devices and white goods motor control boards. When designing with this device, ensure the JTAG chain length and TDO load remain within specifications if multiple CoolRunner-II parts share one chain. The DataGATE feature can be disabled per pin to preserve dynamic behavior on critical paths; verify per-pin signal integrity when chaining long busses. This page synthesizes distributor pricing, drop-in alternative cross-references, and practical design notes not found in the manufacturer datasheet alone.

RFQ Contact
XC2C64A-7VQ100C - 64-Macro-Cell 1.8V CPLD | AMD
XC2C64A-7VQ100C

XC2C64A-7VQ100C - 64-Macro-Cell 1.8V CPLD | AMD

The AMD XC2C64A-7VQ100C is a 64-macro-cell CoolRunner-II complex programmable logic device operating at 1.8 V in a 100-pin VTQFP package. The device provides 1.5K logic gates, a 159 MHz internal frequency, and a 6.7 ns propagation delay, making it suitable for compact, low-voltage programmable logic designs. A CPLD is a programmable semiconductor in the FPGA & CPLD product hierarchy. Its macro cells combine programmable AND/OR logic with dedicated interconnect, allowing a design to be configured by a programming file rather than fabricated as fixed logic. Compared with an FPGA, a CPLD generally offers simpler configuration, deterministic nonvolatile configuration storage, and predictable I/O behavior, while remaining less flexible for very large, high-performance systems. The XC2C64A belongs to the enhanced CoolRunner-II family and uses 0.18 µm CMOS technology. Its 64 macro cells and 1.5K gates provide enough resources for control logic, interface adaptation, bus decoding, state machines, and glue logic. The -7 speed designation corresponds to the listed 6.7 ns propagation-delay class, while the 100-pin VTQFP package supports surface-mount assembly and offers a conventional leaded footprint for prototype and production boards. The device is optimized for 1.8 V systems and combines low power consumption with reconfigurable logic resources. In a design, the JTAG programming interface loads the configuration data, the I/O buffers interface with external signals, and the internal macro cells implement the selected Boolean functions. Because configuration is nonvolatile, the circuit can begin operating its programmed function after power is applied without requiring a separate configuration PROM. Typical uses include industrial automation, telecommunications, consumer equipment, embedded control, and general-purpose interface bridging. Its combination of 64 macro cells, 45 listed user I/Os, and a 1.8 V core suits designs that need compact glue logic but not the routing capacity of a large FPGA. It can also serve as a lifecycle upgrade for an XC2C64 design where the manufacturer identifies the enhanced XC2C64A family as pin-for-pin compatible. PCB design should preserve the 0.50 mm lead pitch and follow the manufacturer land pattern, power, decoupling, and programming guidance in DS311. Check the selected temperature grade and device variant before release because speed, temperature, and package suffix combinations define distinct orderable parts. This page combines the CoolRunner-II architecture, package characteristics, lifecycle replacement information, drop-in candidate comparison, and practical implementation guidance to help engineers evaluate the XC2C64A-7VQ100C beyond a basic distributor parameter table.

RFQ Contact
XC2C64A-7VQ100I - 64-Macro-Cell 1.8V CPLD | AMD Xilinx
XC2C64A-7VQ100I

XC2C64A-7VQ100I - 64-Macro-Cell 1.8V CPLD | AMD Xilinx

AMD Xilinx XC2C64A-7VQ100I is a 64-macro-cell CoolRunner-II complex programmable logic device with 1.5K gates, a 1.8 V core, 0.18 µm CMOS technology, and a 100-pin VTQFP package. It operates at the -7 speed grade and is designed for compact, low-power programmable-logic implementations where deterministic routing, nonvolatile configuration, and a modest pin count are important. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines programmable logic and programmable interconnect. In the product hierarchy, a CPLD belongs to programmable-logic devices alongside FPGAs, while its internal macro cells are constructed from CMOS logic. Compared with an FPGA, a CPLD generally offers simpler architecture and predictable timing, making it useful for control logic, interface translation, state machines, and small mixed-logic functions. The XC2C64A provides 64 macro cells and approximately 1.5K logic gates. The -7 grade corresponds to a 159 MHz system frequency in the published family specifications, while listed performance features include a 4.6 ns pin-to-pin logic delay. The device is optimized for 1.8 V systems and uses a 0.18 µm CMOS process. Its 100-pin VTQFP package supports compact surface-mount PCB construction while exposing a larger interface than smaller 44-, 48-, and 56-pin members of the family. CoolRunner-II devices combine logic implementation with nonvolatile configuration memory, allowing a circuit to retain its programmed behavior after power is removed without external configuration flash. The XC2C64A architecture is appropriate when a design needs more logic capacity than basic fixed-function gates, but not the resource density of a larger FPGA. Its performance class should be checked against the worst-case timing path in the selected design rather than inferred only from the maximum clock figure. Typical applications include industrial control interfaces, data acquisition front ends, telecommunications interface logic, instrumentation, and embedded control systems. The 64 macro cells can implement multiple state machines, bus-interface translators, protocol converters, timing blocks, or glue logic around processors. In a mixed design, the CPLD can consolidate deterministic logic between a microcontroller and external peripherals while avoiding a larger programmable-logic footprint. For PCB implementation, use the manufacturer pinout and package drawing for the 100-pin VTQFP, and confirm the available I/O count for the selected speed-grade and package combination before assigning signals. Place decoupling capacitors close to the power and ground pins, provide a clean ground reference, and route high-speed or sensitive inputs away from switching nodes. Programming should follow the CoolRunner-II toolchain and device-identification procedure described in AMD documentation. This product record combines device-family specifications, lifecycle information, obsolete-part replacement context, and same-package upgrade or replacement options. It also highlights the trade-offs among speed grade, temperature grade, package footprint, and design qualification when selecting an alternative for an existing 100-pin board.

RFQ Contact
XC2C64A-7VQ44C - 64-Macrocell 6.7ns CPLD | AMD
XC2C64A-7VQ44C

XC2C64A-7VQ44C - 64-Macrocell 6.7ns CPLD | AMD

AMD XC2C64A-7VQ44C is a CoolRunner-II complex programmable logic device with 64 macrocells, a 6.7 ns maximum propagation delay, a 1.8 V internal supply, and a 44-pin VQFP package. It is a surface-mount programmable-logic IC intended for compact embedded systems that require deterministic combinational and registered logic without the resource level of an FPGA. The part uses 0.18 µm CMOS technology and belongs to the CoolRunner-II family of CPLDs. A CPLD is a programmable-logic semiconductor that combines interconnected programmable macrocells, a fixed interconnect structure, and input/output blocks. In the product hierarchy, a CPLD is a programmable-logic device and a member of the broader FPGA and CPLD category. Compared with an FPGA, this device offers a smaller, simpler architecture intended for glue logic, control logic, interface conditioning, and modest state-machine implementations. Its 64 macrocells provide substantially more logic capacity than a simple small PLD while retaining deterministic routing and a relatively compact package. The XC2C64A-7VQ44C provides 45 user I/Os according to the retrieved DigChip specifications, 159 MHz maximum operating frequency according to the Datasheets.com listing, and a 6.7 ns maximum propagation-delay figure according to the component data sheet. The -7 speed designation is associated with the 6.7 ns class, while the 1.8 V-oriented internal supply aligns with portable and embedded equipment operating from low-voltage rails. The package is identified elsewhere in the retrieved data as a 44-pin VQFP; one secondary listing inconsistently describes a 56-pin CSP, so package-specific decisions should be confirmed against the AMD DS311 document and the individual pinout drawing. The CoolRunner-II architecture is useful for bridging asynchronous interfaces, decoding control commands, implementing compact state machines, and fixing timing or protocol issues in larger processor-based designs. Its 45 user I/Os can support multiple digital control, communication, and general-purpose I/O assignments, subject to voltage, timing, and pin constraints in the DS311 data sheet. The 6.7 ns propagation-delay class is relevant for combinational control paths, while the 159 MHz frequency figure provides an upper reference for system timing evaluation. Typical uses include industrial control, embedded processor peripherals, communication interface adaptation, data-acquisition modules, and compact control systems. Designers should avoid treating the reported frequency as a universal operating frequency because achievable performance depends on the implemented logic, routing path, I/O standard, and timing constraints. The product should be programmed as an in-system programmable CPLD using a compatible Xilinx or AMD device-programming solution. When designing a replacement PCB, verify the exact package drawings, pin names, power pins, configuration behavior, and supported I/O standards against DS311 rather than relying on distributor classification alone. Ensure the board accommodates the 44-pin VQFP footprint, exposes all required programming and power connections, and provides a stable 1.8 V internal supply environment. The retrieved YIC listing states that the offered device contains lead and is RoHS non-compliant, which may matter for new production sourcing even though the individual component is listed as active.

RFQ Contact
XC2C64A-7VQ44I - 64-Macrocell 1.8V CPLD | AMD Xilinx
XC2C64A-7VQ44I

XC2C64A-7VQ44I - 64-Macrocell 1.8V CPLD | AMD Xilinx

The AMD Xilinx XC2C64A-7VQ44I is a 1.8 V CoolRunner-II complex programmable logic device containing 64 macrocells and approximately 1.5K logic gates in a 44-pin VTQFP package. Listed device characteristics include a 159 MHz speed designation, 45 user I/O pins, 5 ns propagation delay, and as-fast-as 4.6 ns pin-to-pin logic delay. The device uses 0.18 µm CMOS technology and is optimized for low-voltage, high-performance logic implementations. A CPLD is a programmable-logic device that integrates nonvolatile configuration memory, programmable interconnect, and logic blocks into one package. In the semiconductor hierarchy, the XC2C64A belongs to the CPLD class, which sits between fixed-function logic ICs and larger FPGAs. CoolRunner-II devices are commonly used where modest logic density, fast routing, low standby power, and relatively simple re-programming are more important than the capacity of a large FPGA. The XC2C64A provides four principal design advantages: 64 macrocells for compact multi-function logic, 45 user I/Os for external interfaces, 1.8 V operation for compatibility with low-voltage system rails, and a specified 7 speed grade for timing-oriented designs. Its advertised 5 ns propagation delay and 4.6 ns pin-to-pin delay support control logic, interface conditioning, bus arbitration, state-machine implementations, and low-to-moderate-complexity glue logic. Its 0.18 µm CMOS implementation places the part in the CoolRunner-II product generation. The listed 159 MHz frequency is distinct from the separately reported 333 MHz internal-frequency figure in distributor technical summaries, so designs should use the AMD DS311 data sheet for timing definitions and device-limit interpretation. Quiescent-current details are also inconsistent across the supplied summaries, making the manufacturer document the controlling source for final power-budget decisions. Typical uses include industrial control, communication equipment, battery-operated instruments, embedded system supervision, bus-interface logic, and general-purpose programmable glue logic. The 45 I/O count permits substantial board-level connectivity without moving to a larger programmable-logic device, while the 44-pin surface-mount package supports compact designs. Designers should verify the exact VQ44 pin mapping, supported I/O standards, bank voltage limits, and AC timing from DS311 before layout release. Because the available search summaries conflict between VTQFP-44 and a 56-pin CSP description, the package drawing and pinout should be checked against the device marking and ordering code rather than inferred from the MPN alone. This page combines verified distributor specifications, official AMD documentation, and engineering-focused guidance for XC2C64A-7VQ44I selection, timing review, layout validation, and drop-in replacement assessment.

RFQ Contact
XC2C64A-7VQG44C - 64-Macrocell 1.8V CPLD | Xilinx
XC2C64A-7VQG44C

XC2C64A-7VQG44C - 64-Macrocell 1.8V CPLD | Xilinx

Xilinx XC2C64A-7VQG44C is a CoolRunner-II complex programmable logic device with 64 macrocells, 4 logic blocks, 1,500 usable gates, and a maximum system frequency of 159 MHz. It uses 0.18 µm CMOS Flash technology, operates from a 1.8 V core supply, and is packaged in a 44-pin VTQFP measuring 10 mm by 10 mm. The device provides 33 user I/O pins and supports hot-swap operation for controlled insertion into a live backplane. A CPLD, or complex programmable logic device, is a user-programmable semiconductor that combines multiple logic functions into one reconfigurable device. Its hierarchy places it within programmable logic alongside FPGA and CPLD technologies, where it is especially useful for compact glue logic, protocol conversion, bus arbitration, and interface control. CoolRunner-II combines nonvolatile configuration storage with low-power operation, allowing the implemented circuit to retain its logic after power is removed. Key features include 64 macrocells distributed across 4 function blocks, up to 1,500 usable gates, and a maximum system frequency of 159 MHz. The -7 speed designation places this part in the 159 MHz performance class, while the G package code identifies the 44-pin VTQFP configuration. Input/output performance can reach a 4.6 ns pin-to-pin logic delay, and the architecture is optimized for systems operating from a 1.8 V supply. The CoolRunner-II architecture uses Xilinx RealDigital technology in a 0.18 µm CMOS Flash process. Flash-based configuration supports nonvolatile programmed logic, while the low-power design targets both high-performance and battery-operated equipment. The programmable macrocell structure provides a practical capacity for multi-function logic without the resource overhead of a much larger FPGA. Typical uses include communication-equipment interface logic, battery-powered portable systems, bus control, protocol bridging, embedded control, and general-purpose glue logic. The 33 user I/O pins are suitable for connecting the CPLD to external memory, processors, converters, and peripheral devices when the board's electrical requirements match the selected I/O standards. Designers should review the DS311 device pin table before assigning every signal, especially configuration, power, ground, and I/O pins. Validate signal timing at the intended system frequency, apply the manufacturer's recommended bypass capacitors, and observe the package-specific keep-out and thermal-pad guidance. For an existing XC2C64 design, the AMD XCN05017 notice identifies XC2C64A as the enhanced pin-for-pin replacement for the original XC2C64. This product record combines the DS311 family specifications with practical device-selection, timing, package, and migration guidance. It also distinguishes same-package speed-grade alternatives from larger-package CoolRunner-II variants, helping engineers preserve PCB compatibility while evaluating performance, temperature grade, and lifecycle constraints.

RFQ Contact
XC2C64A-7VQG44I - 64-Macrocell 159MHz CPLD | AMD
XC2C64A-7VQG44I

XC2C64A-7VQG44I - 64-Macrocell 159MHz CPLD | AMD

The AMD XC2C64A-7VQG44I is a 64-macrocell CoolRunner-II complex programmable logic device with a 159 MHz maximum operating frequency, 33 user I/O, and a 44-pin VTQFP package. It uses 0.18 µm CMOS technology with a 1.8 V core supply, combining programmable logic, in-system programmability, and a 6.7 ns speed designation in one compact surface-mount package. A CPLD, or complex programmable logic device, is a programmable semiconductor that converts digital logic descriptions into fixed hardware interconnections. Within the product hierarchy, the XC2C64A belongs to the CoolRunner-II family of CPLDs, joining other programmable-logic devices and FPGAs used for control, interface, glue logic, and signal-processing functions. Unlike a microcontroller, a CPLD executes configured logic directly in hardware after programming. The device provides 64 macrocells and approximately 1,500 logic gates for implementing combinational and sequential functions. Its 33 I/O pins support connections to external memory, control signals, displays, sensors, and communications circuitry. The -7 speed designation corresponds to a listed 6.7 ns propagation delay, while the 159 MHz figure describes the maximum operating frequency used when evaluating timing performance. The 0.18 µm CMOS implementation and 1.8 V core operation place the XC2C64A in the CoolRunner-II architecture designed for low-voltage, high-density programmable logic. The manufacturer data sheet also identifies the device as an in-system-programmable CPLD, allowing configuration data to be loaded through the device's programming interface while the surrounding system is operating. Typical applications include industrial control and data-acquisition modules, communications-interface logic, test equipment, embedded system support functions, display and keypad controllers, and general-purpose board glue logic. Its combination of 64 macrocells, 33 I/O, and a 44-pin package makes it useful when a design requires more logic than a small GAL or simple fuse-programmed device but does not need a larger FPGA. Designers should preserve the package's exact pin assignments in the PCB library and follow the CoolRunner-II programming, decoupling, and termination guidance in AMD document DS311. Timing closure should use the speed-grade and I/O constraints appropriate to the selected clocking scheme rather than relying only on the 159 MHz headline frequency. This page combines the manufacturer's CoolRunner-II technical information with package-aware replacement guidance, design notes, and application-focused selection criteria. These engineering resources help identify where the XC2C64A-7VQG44I fits, which same-package variants can simplify sourcing, and which design checks should be completed before layout release.

RFQ Contact
XC2S50E-6PQG208C - Spartan-IIE FPGA, 50K Gates, 208-PQFP | AMD
XC2S50E-6PQG208C

XC2S50E-6PQG208C - Spartan-IIE FPGA, 50K Gates, 208-PQFP | AMD

The AMD (formerly Xilinx) XC2S50E-6PQG208C is a Spartan-IIE Field Programmable Gate Array (FPGA) IC integrating 50,000 system gates, 1,728 logic cells, and 32,768 bits of block RAM in a 208-pin Plastic Quad Flat Pack (PQFP / 208-BFQFP) package with 146 user I/O pins. It is built on a 0.18 µm CMOS process, supports system performance beyond 200 MHz with internal logic capable of 357 MHz, and is offered in the -6 speed grade with 6 ns pin-to-pin logic delay. A Field Programmable Gate Array (FPGA) is a type of integrated circuit in the programmable logic family, sitting between standard logic ICs and ASICs in the semiconductor hierarchy. FPGAs contain an array of configurable logic blocks (CLBs), programmable interconnect, and embedded memory that can be reconfigured post-manufacture to implement arbitrary digital logic. The Spartan-IIE family targets cost-sensitive, high-volume applications requiring densities up to 600K system gates with the flexibility of in-system reprogrammability via SRAM configuration cells. Key features of the XC2S50E include SelectIO™ signaling supporting 18 popular I/O standards including LVDS, LVTTL, LVCMOS, SSTL, and GTL; up to 384 CLBs (configurable logic blocks); four Delay-Locked Loops (DLLs) for clock de-skew and frequency synthesis; 32 kbit distributed RAM plus dedicated 4 kbit dual-port block RAM; and JTAG boundary-scan (IEEE 1149.1) for board-level testing. The device operates from a 2.5 V core supply with 1.5 V–3.3 V auxiliary supply for I/O flexibility. The Spartan-IIE architecture combines Lookup-Table (LUT) based logic, distributed SelectRAM, dedicated 18 kbit Block SelectRAM multipliers, and a hierarchical routing fabric. This combination is engineered for digital signal processing (DSP), glue logic, bus interfacing, and embedded control, replacing discrete TTL/CMOS logic while keeping unit cost low. Hot-swap I/O, 5 V tolerance on user I/O, and PCI 66 MHz compliance expand its applicability into mixed-voltage and legacy backplane designs. Typical applications include telecommunications bridging and aggregation, low-cost DSP front-ends, industrial control and instrumentation, video processing, set-top box interface logic, and embedded computing subsystems. The 208-PQFP with 1.0 mm lead pitch is well-suited for prototype and low-volume production where surface-mount reflow of fine-pitch BGA is undesirable. When designing with the XC2S50E-6PQG208C, ensure the 208-PQFP land pattern matches the 30.6 mm × 30.6 mm body dimensions and that decoupling follows the manufacturer reference schematic (typically 0.1 µF + 10 µF per supply rail). The ISE WebPACK toolchain supports this device and is recommended for synthesis, place-and-route, and bitstream generation. This page synthesizes distributor pricing for the lead-free commercial-grade variant, drop-in same-package speed/package alternatives, and practical design notes not consolidated on any single distributor or datasheet page.

RFQ Contact
XC2V1500-4FFG896C - Virtex-II 1.5M Gates FPGA | AMD/Xilinx
XC2V1500-4FFG896C

XC2V1500-4FFG896C - Virtex-II 1.5M Gates FPGA | AMD/Xilinx

The AMD (formerly Xilinx) XC2V1500-4FFG896C is a Virtex-II family Field-Programmable Gate Array (FPGA) IC integrating 1.5 million system gates, 17,280 logic cells, and 884,736 bits of block RAM in a 896-ball Flip-Chip Fine-pitch Ball Grid Array (FFG/FCBGA) package. The '4' speed grade, commercial 'C' temperature (0C to 85C), and 528 user I/O make it suitable for high-density logic prototyping, embedded processing platforms, and high-speed serial interfacing using SelectIO and RocketIO-capable I/O standards (when paired with the appropriate family member). A Field-Programmable Gate Array (FPGA) is a semiconductor device built around a matrix of configurable logic blocks (CLBs), programmable interconnect, and I/O cells that the designer can reconfigure post-manufacture to implement arbitrary digital circuits, from glue logic to full processor subsystems. Within the IC hierarchy, an FPGA sits between an ASIC and a programmable logic device (PLD/CPLD): ASICs are application-specific and fixed, CPLDs handle simpler glue logic with non-volatile configuration, and FPGAs sit above for the highest logic density and highest-speed serial I/O. Virtex-II is the Xilinx generation built on a 0.15 micrometer CMOS process with 1.5V core, introducing dedicated 18x18 hardware multipliers and block RAM tiles tuned for DSP and datapath acceleration. Key parameters worth highlighting: 1.5 million system gates (a marketing-derived gate count), 17,280 logic cells, 1,920 Configurable Logic Blocks / CLBs (the 17,280-cell / 1920-LAB count matches Virtex-II datasheet convention), 884,736 bits of embedded block RAM organized into selectable 18-Kbit blocks, and 528 user I/O pins distributed across the package perimeter. The device supports configuration via SelectMAP, JTAG (IEEE 1149.1), and serial modes, with on-chip clock management through eight Digital Clock Managers (DCMs). Architecturally, Virtex-II uses a symmetrical array of CLBs each containing four slices, each slice carrying two 4-input Look-Up Tables (LUTs), dedicated carry logic for fast arithmetic, and distributed SelectRAM. The hard IP blocks of 18x18 multipliers and 18-Kbit block RAMs allow DSP and buffering functions to run at hundreds of MHz without consuming general logic resources. Typical applications include high-throughput data acquisition front-ends, telecom baseband processing (3G and early LTE line cards), broadcast video processing, avionics prototype platforms (mil/aero-grade variants exist but the -4 C grade is commercial), and ASIC prototyping shells. The 528 I/Os and large logic capacity also suit test-and-measurement backplanes. Designers should be aware that this part is now classified Obsolete (EOL) in the supply chain; long-term designs should consider Virtex-4, Virtex-5, or current Kintex 7-series equivalents from AMD/Xilinx, while PCN documentation must be reviewed for any in-production designs. Power estimation should be performed pre-layout using the Xilinx Power Estimator (XPE) because the VQFN-style multi-rail FCBGA demands a substantial decoupling network and a thermal solution capable of sustaining typical Virtex-II junction profiles. This page synthesizes distributor inventory from DigiKey, parametric data from the manufacturer Virtex-II datasheet, and practical pin-compatibility notes not bundled into the bare datasheet PDF.

RFQ Contact
XC2VP7-6FF672 - Virtex-II Pro FPGA, 11K Cells, 396 I/O | AMD Xilinx
XC2VP7-6FF672

XC2VP7-6FF672 - Virtex-II Pro FPGA, 11K Cells, 396 I/O | AMD Xilinx

The AMD Xilinx XC2VP7-6FF672 is a Virtex-II Pro family Field Programmable Gate Array (FPGA) built on a 0.13um/90nm dual-process CMOS technology and housed in a 672-ball flip-chip BGA (FF672) package. It delivers 11,088 logic cells, 396 user I/O, 8 RocketIO multi-gigabit transceivers, and one embedded PowerPC 405 processor core, providing a complete system-on-chip platform for high-performance embedded designs. Virtex-II Pro FPGAs belong to the Platform FPGA family, which integrates hard IP such as multi-gigabit transceivers and embedded processor cores directly onto the programmable fabric. By combining hardware-accelerated serial I/O (RocketIO at up to 3.125 Gbps) with an embedded PowerPC 405 core, these devices enable designers to replace discrete ASSPs and reduce system BOM cost while accelerating time-to-market for networking, telecom, and embedded computing applications. Key features include 1,1088 logic cells, 792 Kbit of distributed SelectRAM, dedicated 18x18 multipliers for DSP blocks, 8 RocketIO serial transceivers, 1 hard PowerPC 405 processor core running up to 400 MHz, 396 maximum user I/O, and 27mm x 27mm FF672 package with 1.0mm ball pitch. The device supports common logic families via 1.5V core supply, 2.5V/3.3V-tolerant I/O, and is available in commercial (C) and industrial (I) temperature grades. The Virtex-II Pro architecture combines a configurable logic fabric (CLBs, slices, LUTs), block RAM, multipliers, DCM clock managers, and hard IP cores. The dual-process 0.13um/90nm CMOS process enables integration of the PowerPC 405 hard core and RocketIO transceivers, providing deterministic performance that soft processor cores on the fabric cannot match. Typical applications include 10 Gigabit Ethernet line cards, software-defined radio base stations, high-speed serial backplanes, telecom multiplexer/demultiplexer equipment, and embedded computing platforms. The integrated PowerPC 405 makes the part particularly attractive for systems requiring firmware-driven control with hardware-accelerated DSP and serial I/O. When designing with the XC2VP7-6FF672, use the Xilinx ISE Design Suite for synthesis, place-and-route, and bitstream generation. Multi-gigabit serial links require careful PCB layout with controlled-impedance differential traces; consult Xilinx application note XAPP681 for RocketIO board design guidelines. This page synthesizes AMD Xilinx distributor pricing, same-family drop-in alternatives (XC2VP7-5FF672I and XC2VP7-7FF672I in the same FF672 BGA), and practical design notes not found in the manufacturer datasheet.

RFQ Contact
XC3090L-100PC84C - XC3000 FPGA 6K Gates 100MHz PLCC-84 | Xilinx
XC3090L-100PC84C

XC3090L-100PC84C - XC3000 FPGA 6K Gates 100MHz PLCC-84 | Xilinx

The Xilinx XC3090L-100PC84C is a 5V, 100MHz Field Programmable Gate Array from the legacy XC3000 family, housed in an 84-pin Plastic Leaded Chip Carrier (PLCC) package. It integrates approximately 6,000 usable gates and 320 Configurable Logic Blocks (CLBs) on a 5-micron CMOS process, making it one of the highest-density parts in the original XC3000 series. A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit composed of an array of configurable logic blocks, programmable interconnect, and input/output cells that engineers can program after manufacture. FPGAs sit within the broader taxonomy of programmable logic devices (PLD) and digital semiconductors, alongside CPLDs, ASICs, and microcontrollers. Unlike an ASIC (Application-Specific Integrated Circuit), an FPGA requires no photomask NRE and ships as a blank silicon canvas that the user programs via a hardware description language or schematic capture flow, then a vendor-specific bitstream. Key features of the XC3090L-100PC84C include a -100 speed grade, 144 logic-cell equivalent capability, and CMOS technology at a 5V supply. The device supports distributed RAM via CLB configuration and includes on-chip boundary-scan (IEEE 1149.1) test logic for board-level diagnostics. The PLCC-84 ceramic-compatible plastic package has a JEDEC-standard 1.27 mm pin pitch, allowing socket-mounting for prototyping or direct surface mounting for production. The XC3090L variant is the low-power evolution of the original XC3090, using a 3.3V core option in some speed grades while retaining 5V-tolerant I/O. The part is typically configured using the Xilinx XACT development environment with schematic capture, automatic place-and-route, logic and timing simulation, and an interactive design editor for design optimization. Designers should use timing calculator features and integrate with the standard design environment toolchain. Typical applications of the XC3090L-100PC84C include legacy telecommunications glue logic, industrial control state machines, prototyping ASICs, glue logic for vintage bus architectures such as VME and ISA, and educational FPGA laboratory kits. The 100MHz internal logic rate suits mid-speed glue-logic and bus-interface bridging tasks. When designing with this part, ensure adequate decoupling (one 0.1uF per supply pin cluster) and respect the 5V I/O voltage level. Note that the XC3000 family is NRND/EOL for new designs - consider Xilinx Spartan or Artix-7 for new projects unless maintaining legacy equipment. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers source or replace this legacy FPGA with confidence.

RFQ Contact
XC3090L-125PC84C - 5K-Gate FPGA, 125MHz, 84-Pin PLCC | Xilinx
XC3090L-125PC84C

XC3090L-125PC84C - 5K-Gate FPGA, 125MHz, 84-Pin PLCC | Xilinx

The Xilinx XC3090L-125PC84C is a CMOS Field Programmable Gate Array (FPGA) from the XC3000L low-voltage Logic Cell Array family, supplied in an 84-pin PLCC package. It features 320 Configurable Logic Blocks (CLBs), approximately 5000 equivalent logic gates, 928 flip-flops, and a maximum clock frequency of 125 MHz. The device operates from a 3.0 V to 3.6 V supply (typical 3.3 V), reflecting the L-suffix low-voltage variant of the classic XC3000 architecture. An FPGA (Field Programmable Gate Array) is a semiconductor integrated circuit composed of an array of configurable logic blocks, interconnect routing, and programmable I/O cells that can be electrically configured by the end user to implement arbitrary digital logic. FPGAs occupy the middle ground between fixed-function ASICs and software-programmable microcontrollers, offering parallel hardware execution, deterministic timing, and on-the-fly reconfigurability. The XC3000L family sits at the foundation of SRAM-based FPGA technology, with logical hierarchy: CLB -> logic cell array -> FPGA -> programmable logic device (PLD) -> digital integrated circuit. Key features of the XC3090L-125PC84C include 320 CLBs delivering roughly 5,000 usable gates, 928 edge-triggered flip-flops for pipelined or state-machine designs, a maximum toggle rate of 125 MHz, and 84 PLCC pins providing programmable I/O plus dedicated configuration, clock and JTAG interfaces. The device supports JTAG (IEEE 1149.1) boundary-scan for board-level test, in-system reprogrammability through the standard Xilinx XC3000 configuration bitstream, and a power-down mode that significantly reduces quiescent current for battery-friendly applications. Architecturally, the XC3090L implements the classic Xilinx XC3000 CLB with a 5-input lookup table feeding two flip-flops, a programmable interconnect matrix of single-length and double-length lines, and tri-state buffers that allow efficient implementation of muxes, busses, and tri-state I/O. The 125 MHz speed grade places it in the highest tier of the XC3090L family, enabling high-performance glue logic, custom state machines, and DSP-style bit-level pipelines on a single chip. Typical applications include legacy telecom interface glue logic, industrial control and instrumentation front ends, custom peripheral controllers for microprocessor systems, prototyping vehicles for ASIC verification, and reconfigurable test fixtures. Designers building long-life industrial equipment, military refresh programs, or replacement boards for existing XC3000-based systems remain the primary users of this classic part. Designers using the XC3090L-125PC84C should preserve the legacy 3.3 V supply rail, follow Xilinx XC3000 configuration mode recommendations (SelectMAP/serial master or slave), and respect the PLCC pin-out when laying out new PCBs or repairing legacy boards. This page combines distributor pricing, verified cross-reference data, and design notes that are not collected in the original Xilinx datasheet.

RFQ Contact
XC3090L-6TQ176C - 3.3V 9000-Gate FPGA, 176-Pin TQFP | Xilinx
XC3090L-6TQ176C

XC3090L-6TQ176C - 3.3V 9000-Gate FPGA, 176-Pin TQFP | Xilinx

The Xilinx XC3090L-6TQ176C is a low-voltage (3.3 V) Logic Cell Array (LCA) FPGA from the legacy XC3000L family, integrating approximately 9,000 usable gates into a 176-pin TQFP (TQ) package. It is built on a 0.8-micron CMOS SRAM process with six speed-grade -6 timing, and is intended for digital logic prototyping and small-volume glue-logic designs where 5 V-only XC3000 parts are not an option. An FPGA (Field Programmable Gate Array) is a semiconductor IC containing an array of configurable logic blocks (CLBs), programmable interconnect, and programmable I/O cells, all defined by a bitstream stored in SRAM configuration memory. The XC3000L is the low-voltage (3.3 V) variant of the XC3000 family - it sits below the older 5 V XC3000, the higher-density XC4000, and modern 7-series/UltraScale devices in the Xilinx hierarchy of programmable logic. Compared with modern FPGAs, the XC3090L has very limited logic, no dedicated block RAM, no DSP slices, and no high-speed transceivers, but it remains popular for legacy designs, retrocomputing, and educational use. Key features of the XC3090L-6TQ176C include a 16 x 16 array of Configurable Logic Blocks (total 320 CLBs), approximately 9,000 system gates, 144 user I/O pins (note: total package pins = 176, with 32 reserved for power/ground/program pins), 5 ns typical combinatorial delay in speed-grade -6, 220 MHz flip-flop toggle rate, and low-power 3.3 V CMOS I/O. The TQ176 (TQFP-176) package provides a 1.0 mm lead pitch and is suitable for through-hole-style prototyping adapters as well as surface-mount assembly. The device is SRAM-based, so the bitstream must be reloaded after every power-up from a serial PROM (e.g., XC1736A) or microcontroller. From an architectural standpoint, the XC3090L uses a symmetrical grid of CLBs surrounded by IOBs (I/O blocks), connected by a hierarchical routing network. Logic functions are implemented through 5-input look-up tables in each CLB; flip-flops, latches, and combinatorial logic are all selectable. The configuration bitstream is loaded via a serial-mode daisy chain or the SelectMAP/parallel modes, and the device supports readback for design verification. Typical applications include legacy 3.3 V glue-logic replacement, custom peripheral controllers for retrocomputing projects, industrial control interfaces, parallel-to-serial converters, and educational FPGA training platforms. The wide 3.3 V I/O tolerance also makes it usable as a level-shifting bridge between 5 V and 3.3 V domains when paired with appropriate bus hold or pull-up resistors. When designing with the XC3090L-6TQ176C, plan for the configuration PROM: the SRAM cells lose their pattern at every power-down, so an XC17xx series serial PROM or microcontroller bitstream loader is mandatory. Decoupling must follow the datasheet guidelines (typically one 0.1 uF plus one 10 uF per VCC/IOB cluster), and unused I/O pins must be tri-stated or pulled to a defined level to avoid IOB contention. This page synthesizes legacy distributor stock, datasheet figures, drop-in XC3000L alternatives, and practical configuration-memory guidance that the bare manufacturer datasheet does not provide, so procurement and design engineers can source and use the part with confidence as of 2026-09-13.

RFQ Contact
XC3090L-6TQ176I - XC3000L 320MHz FPGA 176-pin TQFP | Xilinx
XC3090L-6TQ176I

XC3090L-6TQ176I - XC3000L 320MHz FPGA 176-pin TQFP | Xilinx

The Xilinx XC3090L-6TQ176I is a member of the XC3000L Low Voltage Logic Cell Array Family of Field-Programmable Gate Arrays, housed in a 176-pin TQFP package with -6 speed grade and industrial temperature rating. The XC3000L family uses a low-voltage SRAM-based logic cell architecture optimized for low-power, high-density designs, and the XC3090L device delivers approximately 320 MHz of combinatorial logic performance with 100 I/O pins organized into four I/O banks for mixed-voltage interfacing. A Field-Programmable Gate Array (FPGA) is a programmable semiconductor device built around a matrix of configurable logic blocks (CLBs), programmable interconnect, and configurable I/O cells. Unlike ASICs, FPGAs can be reconfigured after manufacturing, making them ideal for prototyping, low-volume production, and designs requiring late-stage hardware changes. In the system hierarchy, an FPGA sits between discrete logic and ASICs in terms of cost-per-volume and design flexibility, and the XC3000L family occupies an early-generation position in this lineage with simpler routing resources than modern FPGA families. Key features of the XC3090L-6TQ176I include 5V-tolerant I/O with low-voltage core operation, on-chip configuration memory, JTAG boundary-scan support, and configurable output drive strength. The TQ-176 package offers a 1.0 mm lead pitch and a compact footprint compatible with standard surface-mount assembly processes. The -6 speed grade balances timing margin against power consumption, while the I suffix indicates the industrial temperature range from -40C to +85C. The XC3000L architecture uses a symmetrical array of Configurable Logic Blocks connected by a hierarchical routing network with short, long, and direct interconnect segments. Each CLB contains combinational logic, look-up tables, and flip-flops that the user can interconnect to implement arbitrary digital functions. Configuration bitstreams are loaded serially or in parallel from an external PROM at power-up. Typical applications include industrial control and instrumentation, glue logic replacement, telecommunications interface cards, and legacy system maintenance where the original XC3000L design must remain available for repair and long-life-cycle production. The industrial temperature grade also suits factory automation, medical equipment, and other environments where commercial-grade parts would fail. When designing with this device, consider configuration PROM selection carefully: the XC3000L series loads its bitstream from a serial configuration PROM, and not all modern PROMs are compatible. The 176-pin TQFP requires a generous PCB keep-out zone for the leads and a fine-pitch soldering profile to avoid tombstoning on small passive parts. This page synthesizes distributor pricing, package-level drop-in alternatives from the same XC3000L family, and practical design notes not found in the manufacturer datasheet alone.

RFQ Contact
XC3090L-6TQG176C - XC3000L FPGA 6ns 138 I/O TQG176 | Xilinx
XC3090L-6TQG176C

XC3090L-6TQG176C - XC3000L FPGA 6ns 138 I/O TQG176 | Xilinx

The Xilinx XC3090L-6TQG176C is a member of the XC3000L Low-Voltage Logic Cell Array FPGA family, providing 138 user I/O pins in a 176-pin Thin Quad Gull-Wing (TQG) surface-mount package with -6 speed grade and commercial operating temperature. This device is part of the legacy XC3000L series that operates from a 3.3V supply, distinguishing it from the original 5.0V XC3000A family. A Field Programmable Gate Array (FPGA) is a reconfigurable semiconductor device whose logic function is defined by user-programmed configuration memory rather than fixed mask wiring. In the hierarchy of programmable logic, FPGAs sit above simpler PLDs and below structured ASICs, offering higher logic density, distributed RAM, and dedicated I/O cells. The XC3000L family specifically targets low-voltage (3.3V) designs where battery life or power budget is critical, such as portable telecom, handheld instrumentation, and mobile peripherals. Key features of the XC3090L-6TQG176C include an array of 138 user I/O, six dedicated clock buffers (two on-chip oscillator inputs and four global clock buffers), a 6ns combinatorial logic delay, configurable logic blocks (CLBs) organized into rows and columns, and a perimeter I/O ring supporting a wide range of I/O standards of its era. The device integrates a complete development tool flow on legacy Xilinx design environments with schematic capture, automatic place-and-route, timing simulation, and an interactive design editor. The XC3090L-6TQG176C uses a SRAM-based configuration memory, allowing unlimited re-programmability and in-system configuration via the standard Xilinx serial/parallel configuration interface. Its architecture includes symmetrical routing, fast carry logic for arithmetic functions, and dedicated 3-state buffers on each I/O pin for bus-oriented designs. The -6 speed grade delivers 6ns tpd on a typical combinatorial path. Typical applications include glue logic replacement, custom state machines, peripheral controllers for portable systems, DSP preprocessing in early-stage pipelines, communication protocol bridges (UART, I2C, SPI controllers), and low-volume prototyping that does not justify an ASIC NRE. The 3.3V core operation makes it well suited to battery-powered or low-power industrial systems of the late 1990s. When designing with this FPGA, be aware of its legacy status. Designers should verify that the 3.3V core voltage is compatible with the rest of the system, plan for a JTAG or Xilinx XChecker-compatible programming cable, and source configuration PROMs or in-system loading through a microcontroller. The TQG176 footprint is shared across the XC3090L family, so layout reuse is possible across -4, -5, and -6 speed grades. This page synthesizes distributor availability, drop-in alternative cross-references, package diagram, and design notes not bundled in the original manufacturer datasheet, giving procurement and engineering teams a single source for current sourcing decisions.

RFQ Contact
XC3090L-6TQG176I - XC3000L 3.3V FPGA 900 Gates | Xilinx TQG176
XC3090L-6TQG176I

XC3090L-6TQG176I - XC3000L 3.3V FPGA 900 Gates | Xilinx TQG176

The Xilinx XC3090L-6TQG176I is a 3.3 V low-voltage member of the Xilinx XC3000L Logic Cell Array family, packaged in a 176-pin Thin Quad Flat Pack (TQG176) and providing approximately 900 usable gates with 6 ns combinatorial delay. It is part of the original Xilinx XC3000 generation of SRAM-look-up-table FPGAs, targeting low-voltage 3.3 V systems where the original 5 V XC3000 family could not be used directly. An FPGA (Field Programmable Gate Array) is a programmable logic device whose core is an array of configurable logic blocks (CLBs) surrounded by a perimeter of programmable input/output blocks (IOBs), with a programmable interconnect matrix tying them together. The hierarchy runs: logic cell -> CLB -> FPGA -> programmable logic -> digital IC. The XC3000L subfamily is one of the earliest commercial SRAM-based FPGA lines, and the 'L' suffix denotes the 3.3 V variant of the original XC3000 architecture, allowing operation in mixed-voltage boards that were already migrating from 5 V to 3.3 V logic rails. Key features of the XC3090L include a 3.3 V core supply (VCC), 5 V tolerant I/O on selected parts, on-chip configuration logic with five configuration modes, boundary-scan (JTAG) support, and readback capability. The '6' speed grade corresponds to a combinatorial logic delay of roughly 6 ns and a flip-flop toggle rate near 80 MHz in the XC3000L process. The 'I' suffix indicates an industrial temperature grade of -40C to +85C. Typical applications include telecom interface glue logic, industrial control and instrumentation front-ends, prototyping of ASIC designs before HardCopy migration, and legacy equipment where the XC3000L footprint is already committed on the PCB. Designers using the XC3090L can prototype on the SRAM-based FPGA and migrate to a HardCopy Stratix equivalent for volume production using the same package pinout.

RFQ Contact