Products (44,000+)

LM2902KVQPWRQ1 - 26V Quad 1.2MHz Automotive Op Amp | TI
LM2902KVQPWRQ1

LM2902KVQPWRQ1 - 26V Quad 1.2MHz Automotive Op Amp | TI

The Texas Instruments LM2902KVQPWRQ1 is a four-circuit general-purpose operational amplifier qualified for automotive applications, with a 26 V maximum supply rating, 1.2 MHz gain-bandwidth product, and 2 mV offset voltage. It is housed in a 14-pin TSSOP package and is intended for applications requiring multiple independent high-voltage amplifier channels in one compact device. The LM2902-Q1 family is qualified according to AEC-Q100 specifications, while the LM2902B-Q1 and LM2902BA-Q1 members are described as next-generation versions with improved high-voltage operation. An operational amplifier, or op amp, is a voltage-controlled differential amplifier with very high open-loop gain. It compares two input voltages and drives its output toward the difference between them. Because the LM2902KVQPWRQ1 contains four independent, frequency-compensated amplifiers, one package can provide input buffering, sensor conditioning, voltage amplification, current sensing, and active filtering without requiring four separate devices. It supports single-supply operation and split-supply operation, subject to the device’s stated supply limits. The principal advantages of this device are its high-voltage capability, automotive qualification, integrated four-channel architecture, and broad applicability in industrial and vehicle electronics. The 1.2 MHz bandwidth supports general-purpose signal conditioning rather than high-speed precision analog work. Its 2 mV input offset voltage is useful for applications where the input signal is sufficiently large to keep offset errors below the required accuracy. The four channels also allow consistent amplifier performance across multiple signal paths in the same system. Typical applications include 12 V and 24 V automotive sensor interfaces, battery monitoring, pressure and temperature signal conditioning, current sensing, motor-control feedback networks, industrial control modules, and instrumentation buffers. The 14-pin TSSOP package is compact and suitable for high-density PCB layouts, but automotive designs should account for copper-area limitations, thermal dissipation, transient protection, and the need to keep sensitive input traces away from switching and power-conversion nodes. When selecting a replacement, verify the exact channel count, package, supply rating, offset voltage, bandwidth, common-mode behavior, output-drive capability, automotive qualification, and operating-temperature grade. The LM2902KVQPWRQ1 is best suited to four-channel, general-purpose automotive and industrial designs where 26 V operation and AEC-Q100 qualification are more important than high precision or high speed. This page combines the manufacturer product information with practical comparison, replacement, and design guidance for engineers evaluating the device in an existing circuit.

RFQ Contact
LM2902LVIDR - Quad 5.5V 1MHz Op Amp | Texas Instruments
LM2902LVIDR

LM2902LVIDR - Quad 5.5V 1MHz Op Amp | Texas Instruments

Texas Instruments LM2902LVIDR is a four-channel operational amplifier designed for low-voltage signal-conditioning applications, with a 5.5 V maximum supply, 1 MHz gain-bandwidth product, and 3 mV input offset voltage. The device is packaged in a 14-pin SOIC and supports an operating temperature range from -40°C to +125°C. An operational amplifier is an analog integrated circuit that uses high-gain differential amplification to improve signals applied to its two inputs. The LM2902LV belongs to the low-voltage operational-amplifier hierarchy, combining four amplifiers in one package. This integration reduces board area compared with four single-amplifier packages while providing a practical option for sensors, signal buffers, filters, and low-voltage control circuits. The principal features of the LM2902LVIDR include four independent amplifier channels, a 1 MHz gain-bandwidth product, a 3 mV input offset-voltage specification, and operation from a nominal 2.7 V to 5.5 V supply range. Its low-voltage design is suitable for battery-powered and embedded systems where a 5 V or lower rail is available and higher-voltage legacy operational amplifiers would be unnecessary. Each channel uses the standard operational-amplifier arrangement of an inverting input, a non-inverting input, an output, and a power connection. The device supports common signal-conditioning functions such as non-inverting and inverting gain stages, voltage followers, differential amplification, and active-filter sections. Because all four amplifiers share one package, engineers should evaluate supply routing, exposed input noise, output drive, and stability requirements for each individual channel. Typical uses include low-voltage sensor interfaces, transducer buffering, analog signal conditioning, instrumentation, portable equipment, and industrial control modules. In a battery-powered design, the 5.5 V maximum operating supply helps avoid exposing the amplifier to an excessive rail voltage. In multi-channel signal acquisition, the four integrated channels can reduce component count while retaining independent operation for different analog signals. Decoupling remains essential in a low-voltage amplifier design. Place the supply bypass capacitor close to the power pins and route the return path directly to the ground reference. Input and feedback components should be positioned to minimize parasitic capacitance and unwanted coupling between adjacent channels, especially when the 1 MHz bandwidth is used for higher-frequency signals. This product page combines the manufacturer’s ordering information, exact device ratings, practical circuit guidance, and compatibility-focused alternatives. It is intended to help engineers select the correct voltage range, package, operating grade, and replacement before committing a LM2902LVIDR to a PCB or production BOM.

RFQ Contact
LM2902LVIPWR - Quad 5.5V 1MHz Low-Voltage Op Amp | Texas Instruments
LM2902LVIPWR

LM2902LVIPWR - Quad 5.5V 1MHz Low-Voltage Op Amp | Texas Instruments

The Texas Instruments LM2902LVIPWR is a quad, low-voltage operational amplifier rated for 5.5V operation, with a 1 MHz gain-bandwidth product and 3 mV input offset voltage. The device is packaged in a 14-pin TSSOP (PW) package and operates across a -40°C to +125°C temperature range. An operational amplifier, or op amp, is an analog active device that amplifies the voltage difference between its inverting and non-inverting inputs. The LM2902LV contains four independent amplifiers in one package, making it a practical choice for multi-channel signal-conditioning boards. Its hierarchy runs from operational amplifier to analog signal-chain IC and ultimately to semiconductor, while the quad configuration consolidates four channels without requiring four separate packages. Key features include operation from 2.7V to 5.5V, a 1 MHz unity-gain bandwidth, and a typical input offset voltage of 3 mV. The single-supply architecture supports modern 3.3V and 5V systems where the previous high-voltage LM2902 generation would consume more power. A 14-pin TSSOP package also provides a compact surface-mount footprint suitable for automated assembly and space-constrained analog boards. The LM2902LV belongs to the industry-standard LM290xLV family, which also includes the dual LM2904LV. Four amplifiers can implement independent gain, buffer, comparator, filtering, or instrumentation functions, although they do not include a dedicated output latch. Designers should account for input common-mode limits, output swing, noise, and stability when configuring each channel around the device's application information. Typical uses include sensor-signal conditioning, low-frequency active filtering, current measurement, control loops, audio preamplification, and general-purpose buffering. The 1 MHz bandwidth is appropriate for low-to-moderate frequency signals rather than high-speed video or RF chains. When several channels carry related signals, matching channels within one package can also simplify layout symmetry and simplify control of analog grounding. For PCB design, route each amplifier's feedback components close to its pins and keep sensitive input traces away from switching nodes. Because the LM2902LV operates from a single positive supply, the signal reference is the ground rail, and input and output voltages must remain within the electrical limits stated by the manufacturer. Confirm stability with the intended gain, load, and output-capacitance configuration before releasing a production layout.

RFQ Contact
LM2902LVQDRQ1 - 4-Channel 5.5V Automotive Op Amp | TI
LM2902LVQDRQ1

LM2902LVQDRQ1 - 4-Channel 5.5V Automotive Op Amp | TI

The Texas Instruments LM2902LVQDRQ1 is a four-channel, low-voltage automotive operational amplifier with a 2.7 V to 5.5 V supply range, 1 MHz gain-bandwidth product, and 3 mV offset voltage, packaged in a 14-pin SOIC. The LM2902LV-Q1 family combines four general-purpose amplifiers in one package, making it suitable for cost-sensitive automotive systems that need multiple low-voltage signal-conditioning channels. An operational amplifier, commonly called an op amp, is a voltage-controlled differential amplifier with very high open-loop gain. Its high input impedance limits loading on the signal source, while negative feedback determines the closed-loop gain and bandwidth. Within the semiconductor hierarchy, an operational amplifier belongs to the amplifier IC and analog signal-processing categories. The LM2902LV-Q1 family is designed as a lower-voltage alternative to the wider-supply LM2902-Q1 family. The principal features include four amplifiers in one 14-pin SOIC, operation from 2.7 V to 5.5 V, a 1 MHz gain-bandwidth product, and a 3 mV input offset voltage. The quad configuration reduces component count and PCB area when an application needs several independent gain stages. The automotive-oriented -Q1 ordering designation identifies the LM2902LV-Q1 qualification class, while the exact operating limits and qualification details should be confirmed in the manufacturer datasheet. The architecture supports the conventional noninverting, inverting, summing, comparator-style, and voltage-following arrangements commonly used in analog signal conditioning. Because the amplifiers operate from a low-voltage supply, input and output common-mode and output-swing limits require attention near the supply rails. Stable operation also depends on suitable feedback networks, output loading, input bias-current paths, and the manufacturer-recommended bypassing. Typical uses include automotive sensor interfaces, low-voltage transducer conditioning, current-loop receivers, control-signal amplification, and general instrumentation with multiple analog channels. The four integrated channels are particularly useful when several sensors or low-level signals must be conditioned close to a controller. For battery-powered or 5 V automotive electronics, the 2.7 V to 5.5 V supply range provides useful design headroom. For layout, place the supply bypass capacitor close to the positive and ground pins and keep sensitive input traces short and away from switching nodes. Verify common-mode range, output swing, capacitive-load stability, and channel-to-channel layout in the final circuit. Decoupling and stability requirements should follow the pin description and application guidance in the Texas Instruments datasheet.

RFQ Contact
LM2902M - Quad 26 V 1.2 MHz Operational Amplifier | onsemi
LM2902M

LM2902M - Quad 26 V 1.2 MHz Operational Amplifier | onsemi

onsemi LM2902M is a quad operational amplifier containing four independent, internally compensated high-gain amplifiers in a 14-pin SOIC package. The verified product data identifies it as a standard general-purpose amplifier with a 26 V maximum supply, 1.2 MHz gain-bandwidth product, and typical input offset voltage of 2 mV. It is designed for cost-sensitive analog signal-conditioning circuits that require more than one amplifier in a compact surface-mount package. An operational amplifier is an amplifier IC that uses high open-loop gain and negative feedback to control gain accurately. A quad device integrates four amplifiers, reducing package count and simplifying layouts requiring several channels. The LM2902 family belongs to the operational-amplifier hierarchy and supports common analog functions such as signal amplification, buffering, active filtering, comparisons, transducers, and low-frequency closed-loop control. The key headline characteristics are four amplifier circuits, a 26 V supply rating, 1.2 MHz gain-bandwidth product, 2 mV typical offset voltage, and a 14-pin SOIC package. Internal frequency compensation makes each channel suitable for many unity-gain or moderate-gain applications without an external compensation network. On-chip capacitors in each amplifier support stable operation as a general-purpose voltage-feedback amplifier. The architecture follows the classic high-voltage, internally compensated operational-amplifier approach. Four independent amplifiers share one monolithic substrate but do not share internal signal paths. This allows the same device to implement four separate channels, such as a dual-sensor front end or two complete analog-processing chains. The verified data does not provide exact input bias current, output-current capability, slew rate, or common-mode limits, so those specifications require confirmation from the selected manufacturer's datasheet. Typical uses include industrial sensor interfaces, low-frequency active filters, audio preamplifier stages, process-control modules, instrumentation, and general buffer or gain stages. The quad organization is particularly useful when four similar analog functions must fit on a PCB. Actual circuit suitability depends on supply voltage, source impedance, load impedance, signal frequency, output swing, stability, and thermal conditions. For PCB design, place the device so sensitive analog inputs remain short and route outputs away from switching nodes and high-current paths. Bypass each supply connection near the package with suitable decoupling, maintain a common ground reference, and verify unused-channel inputs are biased so they do not float. The SOIC package also requires a thermal strategy when nearby circuitry drives substantial channel dissipation. This page consolidates the verified distributor and manufacturer product information, identifies where identical MPNs come from different manufacturers, and separates confirmed LM2902M characteristics from parameters that still require manufacturer-specific datasheet review before design release.

RFQ Contact
LM2902M/NOPB - 26V Quad 1.2MHz Op Amp | Texas Instruments
LM2902M/NOPB

LM2902M/NOPB - 26V Quad 1.2MHz Op Amp | Texas Instruments

The Texas Instruments LM2902M/NOPB is a four-circuit, general-purpose operational amplifier built for single- or dual-supply operation from a wide 26 V maximum supply. It provides approximately 1.2 MHz gain-bandwidth product, 2 mV input offset voltage, and 14-SOIC packaging, making it suitable for industrial control, instrumentation, sensor interfaces, and general analog signal conditioning. The device is supplied in a tube under the /NOPB ordering code. An operational amplifier, commonly called an op amp, is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The LM2902 belongs to the hierarchy of four-channel general-purpose amplifiers within the broader operational-amplifier and analog IC categories. Its four independent channels make it useful where several low-frequency signals must be amplified, buffered, summed, or compared within one package. The principal features include four independent amplifiers, a 26 V maximum total supply rating, approximately 1.2 MHz gain-bandwidth product, and approximately 2 mV input offset voltage. Its general-purpose performance is suitable for sensor conditioning, current-loop interfaces, audio and communication circuits, and industrial control signals. The 14-SOIC package provides a conventional surface-mount footprint and easy access to separate inputs, outputs, and supply connections for all four channels. Internally, the LM2902M/NOPB uses a frequency-compensated four-amplifier architecture intended for stable operation with conventional external feedback networks. A gain-bandwidth product near 1.2 MHz gives adequate bandwidth for low-frequency instrumentation and control loops without making the device a high-speed precision amplifier. The stated 2 mV offset specification supports general signal conditioning, although applications requiring tighter calibration accuracy may need offset correction or a more precise amplifier. Typical uses include buffering sensor outputs, amplifying low-level analog signals, driving slow comparators, implementing transimpedance stages, and providing gain in industrial instrumentation. Because each channel has independent input and output pins, multiple circuit blocks can be consolidated while preserving separate ground-referenced or feedback networks. The wide supply capability is particularly useful in 12 V or 24 V industrial environments, subject to the device's maximum operating limits. Designers should verify common-mode input range, output swing, input bias current, slew rate, and thermal conditions against the manufacturer datasheet before fixing a supply voltage or gain. Decoupling capacitors should be placed close to the supply pins, and unused amplifier channels should be configured according to the datasheet rather than left floating. Input-source impedance should also be considered because excessive imbalance can create offset and bias-current errors. This page combines the manufacturer's principal operating characteristics, package and ordering details, practical application guidance, and a focused set of same-footprint replacement options. It also adds design notes and comparison criteria that help engineers determine whether the LM2902M/NOPB is suitable for a given signal-conditioning or industrial-control design.

RFQ Contact
LM2902M96 - Quad 1MHz Operational Amplifier | Harris Corporation
LM2902M96

LM2902M96 - Quad 1MHz Operational Amplifier | Harris Corporation

The Harris Corporation LM2902M96 is a quad operational amplifier in a 14-pin SOIC package. The device contains four independent amplifiers, is associated with a 1 MHz gain-bandwidth characteristic, and is identified for commercial, industrial, and military applications. Its quad architecture lets one package support several analog signal-processing functions while simplifying board layout and inventory management. An operational amplifier is a voltage-amplified, high-gain analog building block used in sensing, buffering, amplification, filtering, and control circuits. The LM2902 belongs to the operational-amplifier hierarchy, which includes instrumentation amplifiers, buffer amplifiers, comparator-adjacent interface functions, and general-purpose signal-conditioning ICs. Its four integrated channels make it useful where multiple independent analog paths are required within the same subsystem. The principal features of the LM2902M96 are its four-amplifier configuration, 1 MHz bandwidth indication, and 14-pin SOIC implementation. These characteristics make the device suitable for transducers, sensor conditioning, analog signal buffers, feedback networks, and general instrumentation. The single package also reduces the number of discrete components required when four amplifier channels are needed at the same time. The M96 ordering code identifies the surface-mount 14-pin SOIC configuration. This package supports conventional PCB assembly and provides a practical option for industrial control and instrumentation designs requiring multiple analog channels. Because electrical ratings differ across the wider LM2902 family, designers should confirm supply voltage, input common-mode range, output swing, input bias current, output current, and temperature range against the applicable manufacturer datasheet before finalizing a design. Typical uses include low-frequency process-control loops, sensor amplifiers, analog monitoring channels, buffered instrumentation inputs, and small-signal conditioning stages. The quad organization is especially helpful in equipment that must process several transducers or supply and return signals, such as data-acquisition modules, industrial controllers, test equipment, and communication or power-management interface boards. A key design practice is to verify the complete operating envelope rather than relying only on the 1 MHz bandwidth designation. Input signals must remain within the amplifier's valid common-mode range, output loading must remain within its drive capability, and power-supply bypassing should be placed close to the supply pins. Decoupling values, stability requirements, and output-load restrictions should follow the datasheet and the intended feedback configuration. This page organizes the LM2902M96's core technical identity, verified drop-in candidates, package considerations, commercial information, and application guidance. It also provides practical design notes intended to help engineers move from general amplifier selection to a board-level implementation while preserving the correct 14-pin footprint and checking device-specific electrical limits.

RFQ Contact
LM2902MT - Quad 26V 1.2MHz Op-Amp 14-TSSOP | Texas Instruments
LM2902MT

LM2902MT - Quad 26V 1.2MHz Op-Amp 14-TSSOP | Texas Instruments

The Texas Instruments LM2902MT is a quad general-purpose operational amplifier with four independent, internally frequency-compensated high-gain amplifier circuits in a 14-pin TSSOP package. It operates from supply voltages up to 26 V, delivers a 1.2 MHz gain-bandwidth product, and provides a typical input offset voltage of 2 mV, with output voltage swing of +/-13 V on a +/-15 V class supply (26 V total range). A quad operational amplifier (op-amp) is an analog IC that integrates four identical voltage amplifiers on one silicon die sharing a common bias and supply network. Op-amps form the foundation of the analog signal-chain hierarchy: op-amp -> amplifier IC -> analog front end -> signal conditioning, making the LM2902 family one of the most widely deployed amplifier platforms in industrial electronics. Key features include single-supply operation over a wide voltage range (3 V to 26 V per the LM2902 product family, with split-supply operation possible when the supply difference is 3 V to 26 V), internal frequency compensation that eliminates external compensation components, and a common-mode input range that extends to ground (negative rail), which is essential for single-supply sensing circuits. Architecturally, the LM2902 uses class-AB output stages with internal compensation, allowing stable unity-gain operation without external capacitors. The four amplifiers share supply rails while remaining electrically independent, so each channel can be configured as inverting, non-inverting, differential, or transimpedance amplifier independently. Typical applications include industrial signal conditioning, transducer amplifier front ends, DC gain blocks, active filters, comparators with hysteresis, and automotive sensor interfaces where the extended temperature capability of the LM2902 grade is required. For design, ensure the output stays within the output-voltage swing limits relative to each rail; driving loads too close to the rails can reduce open-loop gain. Decouple the supply pin with 100 nF close to the device. This page adds value beyond the datasheet by compiling drop-in alternative MPNs, package/pinout verification, FAQ answers based on real search queries, and practical design notes not found on the manufacturer product page.

RFQ Contact
LM2902MT/NOPB - Quad 26V Op Amp in 14-TSSOP | TI
LM2902MT/NOPB

LM2902MT/NOPB - Quad 26V Op Amp in 14-TSSOP | TI

Texas Instruments LM2902MT/NOPB is a quad, general-purpose operational amplifier designed for a 26 V maximum supply and a 1.2 MHz gain-bandwidth product. The device contains four independent amplifier sections in a 14-pin TSSOP package, with an operating temperature range of -40°C to 85°C for this ordering option. A general-purpose operational amplifier is a voltage-amplified analog building block that compares an input voltage with a feedback-derived reference voltage. The quad LM2902 combines four amplifiers in one package, reducing component count and board area in sensor, control, and signal-conditioning designs. Its four amplifiers share a common supply architecture but maintain independent differential inputs and outputs. Key features include a 26 V maximum total supply voltage, approximately 1.2 MHz gain-bandwidth product, and 2 mV input offset voltage as identified by Texas Instruments. The low-power architecture is suited to industrial and embedded systems operating from a single supply or split supplies. Four amplifiers in one thermal package also simplify component stocking and reduce the PCB footprint required for multiple amplifier sections. The LM2902 family uses a low-power bipolar process and provides general-purpose amplification rather than precision or high-speed performance. Its gain-bandwidth limit makes it appropriate for audio-frequency, transducer, buffer, and feedback-control circuits. Designers should account for input common-mode range, output swing, input bias current, and supply-voltage limits when setting gain and choosing bypass capacitors. Typical uses include industrial sensor interfaces, transducer amplification, low-frequency active filters, differential analog measurements, current-monitor amplifiers, and general control loops. In each case, the quad arrangement allows one package to serve four amplifier positions while leaving the TSSOP leads easy to inspect and rework. When laying out the circuit, place supply-bypass capacitors close to the supply pins, keep feedback traces short, and route high-impedance input nodes away from switching nodes. Confirm that the input common-mode voltage and required output swing remain inside the device operating limits. Use the manufacturer datasheet pin-description table when assigning PCB tracks and verify supply tolerance before energizing the board. This page consolidates the manufacturer product information, distributor package details, and cross-reference findings into an engineering-focused guide. It also distinguishes the verified LM2902MT/NOPB configuration from related ordering codes and highlights the package, supply, temperature, and offset-voltage constraints that determine interchangeability.

RFQ Contact
LM2902MTX - Quad 1MHz Op Amp | Texas Instruments
LM2902MTX

LM2902MTX - Quad 1MHz Op Amp | Texas Instruments

The Texas Instruments LM2902MTX is a four-circuit general-purpose operational amplifier with a 1 MHz gain-bandwidth product, supplied in a 14-pin TSSOP package. It combines four independent amplifiers in one package, supports operation from single or split power supplies, and is specified for an operating temperature range of -40°C to +85°C. Its frequency-compensated design is intended for industrial control, instrumentation, sensor conditioning, and general analog signal-processing systems. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The LM2902MTX belongs to the broader hierarchy of operational amplifier, analog amplifier, analog IC, and semiconductor. Unlike rail-to-rail precision amplifiers, this general-purpose family is intended for conventional supply rails and moderate signal bandwidth, making it suitable for cost-sensitive designs where 1 MHz bandwidth is sufficient. Each of the four amplifier sections provides high open-loop gain and internally compensated operation. A typical non-inverting gain stage uses the amplifier with feedback from its output to the inverting input, while an inverting stage returns the input signal through a feedback network. The shared 14-pin TSSOP package reduces board area compared with four separate single-amplifier packages, and the four independent channels can implement simultaneous sensing, buffering, filtering, or control functions. The LM2902 family is designed for single-supply or split-supply operation, allowing it to interface with sensors referenced to ground or signals centered between positive and negative rails. Its 1 MHz gain-bandwidth product is adequate for low-frequency control loops, transducer conditioning, and general industrial signal paths, but it is not optimized for high-speed data acquisition or precision applications requiring very low offset voltage, low input bias current, rail-to-rail output swing, or microvolt-level noise. Typical uses include process-control loops, pressure and temperature sensor interfaces, low-frequency active filters, industrial data acquisition, audio and communication support circuitry, and general buffer stages. Using four independent amplifiers in one package can simplify signal routing and reduce component count when a board needs several similar analog channels. Designers should verify the input common-mode range, output swing, input bias current, offset voltage, supply current, and stability requirements against the manufacturer datasheet for the exact operating voltage. Input and output networks should be checked for bias-current compensation, and unused amplifier sections should be configured according to the recommended stable-input arrangement rather than left floating. This product page combines the manufacturer-device identity, package and pin information, operating limits, application guidance, and same-package replacement analysis. It also identifies which electrical characteristics require confirmation from the manufacturer datasheet, helping engineers separate confirmed LM2902MTX attributes from parameters that vary by qualification, temperature grade, or ordering suffix.

RFQ Contact
LM2902MTX/NOPB - Quad 26V 1MHz Op Amp | Texas Instruments
LM2902MTX/NOPB

LM2902MTX/NOPB - Quad 26V 1MHz Op Amp | Texas Instruments

Texas Instruments LM2902MTX/NOPB is a low-power, general-purpose quad operational amplifier containing four independent, internally frequency-compensated amplifiers. It operates from a single power supply, supports supply voltages up to 26 V, and operates at gain-bandwidth frequencies up to 1 MHz. The device is packaged in a 14-pin TSSOP (PW) package and supplied in tape-and-reel packaging for automated surface-mount assembly. An operational amplifier is an analog signal-conditioning semiconductor that compares two input voltages and amplifies their difference. The LM2902 belongs to the broader hierarchy of operational amplifier, analog amplifier, analog signal-processing IC, and semiconductor. Its four independent channels make it suitable for circuits requiring several similar amplifier stages in one compact package, while internal frequency compensation simplifies closed-loop design without external frequency-compensation components. The LM2902MTX/NOPB combines four general-purpose amplifier channels with a 26 V maximum supply rating and gain-bandwidth performance of approximately 1 MHz. Each channel has its own inputs and output, allowing simultaneous use in independent signal paths. The low-power design is intended for general-purpose analog systems where a modest bandwidth is sufficient. Tape-and-reel packaging supports volume manufacturing and automated placement in compact industrial, instrumentation, and control equipment. Internal frequency compensation establishes the dominant-pole behavior of each amplifier and permits stable operation in common non-inverting and inverting configurations without additional compensation networks. The manufacturer describes the LM2902-N family as four independent, high-gain, internally frequency-compensated operational amplifiers designed for operation from a single power supply over a wide voltage range. This architecture favors straightforward implementation over the flexibility offered by externally compensated amplifiers. Typical uses include low-frequency sensor conditioning, transducer amplification, analog summing and comparison stages, active filtering, instrumentation buffers, and industrial control interfaces. Four integrated channels can reduce the component count in designs that require multiple amplifier functions. When one channel is used for a critical precision path, the other channels must still meet the same supply and stability constraints, making common-layout and simultaneous-signal behavior important design considerations. A key design consideration is power-supply range. Although the device supports supplies up to 26 V, input and output voltage limits must be respected during startup, shutdown, and transient conditions. Decoupling capacitors should be placed close to the supply pins, while input sources should avoid excessive capacitance unless its effect on stability is evaluated. The 14-pin TSSOP footprint also requires attention to thermal dissipation and copper routing during assembly. This page combines the exact orderable MPN, package and channel information with practical application guidance, engineering design notes, and a same-footprint comparison. It is intended to help engineers identify the correct quad amplifier, assess replacement options, and plan a robust single-supply analog circuit without relying on assumptions about package or pin compatibility.

RFQ Contact
LM2902MX - Quad 26V 1.2MHz Op Amp | Texas Instruments
LM2902MX

LM2902MX - Quad 26V 1.2MHz Op Amp | Texas Instruments

The Texas Instruments LM2902MX is a four-channel, internally frequency-compensated operational amplifier designed for single-supply operation with a 26 V maximum supply voltage. Each amplifier has a typical gain-bandwidth product of 1.2 MHz and an input offset voltage of 2 mV, while all four amplifiers are housed in a 14-pin SOIC package. The quad configuration provides four independent signal-conditioning channels in one compact surface-mount device. An operational amplifier is an analog signal-conditioning IC that compares voltages applied to its inverting and non-inverting inputs and drives its output to amplify the difference between them. The LM2902 belongs to the operational-amplifier hierarchy within analog ICs and semiconductor devices. Its internal frequency compensation makes it suitable for closed-loop gain stages without an external compensation network, simplifying industrial, instrumentation, and control-system designs. Key characteristics include four amplifier channels, a 1.2 MHz typical gain-bandwidth product, a 2 mV typical input offset voltage, and a typical open-loop DC gain of 100 dB. These characteristics support general-purpose applications involving signal buffering, current-to-voltage conversion, differential amplification, filtering, and low-frequency closed-loop control. A broad common-mode input range and single-supply capability make the device practical for circuits powered from industrial and automotive-style rails. The LM2902MX uses a bipolar amplifier architecture. Internal frequency compensation stabilizes operation at unity gain and simplifies PCB implementation, but the device is intended primarily for lower-frequency analog signals rather than high-speed signal chains. Its 1.2 MHz gain-bandwidth product should be considered when selecting closed-loop gain because bandwidth decreases as gain increases, which can affect signal rise time, phase margin, and loop stability. Typical uses include transducer-signal conditioning, industrial sensor interfaces, current-loop receivers, audio preamplification, analog-control feedback networks, and four-channel instrumentation systems. Multiple independent amplifier sections can process related signals without requiring four separate packages, reducing board area and simplifying power distribution. The quad organization is particularly useful when a design repeats the same amplifier topology across several measurement or control channels. Design the power rails and input common-mode range so they remain within the amplifier's operating limits throughout startup, load transients, and fault conditions. Place input and output bypassing capacitors close to their associated pins, keep feedback paths compact, and avoid long parallel traces that can increase noise pickup. Confirm stability at the intended closed-loop gain and temperature before releasing the PCB layout. This page combines the device's principal electrical characteristics with application guidance, package details, drop-in replacement analysis, and an engineering comparison table. It is intended to help designers determine whether the LM2902MX's four-channel architecture, electrical limits, and 14-pin SOIC footprint fit a new analog design.

RFQ Contact
LM2902MX-ON - Quad General-Purpose Op Amp | onsemi
LM2902MX-ON

LM2902MX-ON - Quad General-Purpose Op Amp | onsemi

The onsemi LM2902MX-ON is a general-purpose, four-circuit operational amplifier packaged in a 14-pin SOP. It provides four independent amplifier channels in one device, making it suitable for compact analog signal-conditioning designs that require more than one amplifier. The LM2902MX-ON is identified as a standard operational amplifier for instrumentation and general-purpose signal-processing applications. An operational amplifier, commonly called an op amp, is an analog IC that amplifies the voltage difference between its inverting and non-inverting inputs. The LM2902MX-ON combines four amplifiers in one package, reducing component count and simplifying PCB layout compared with four separate single-amplifier packages. Within the semiconductor hierarchy, it is a quad operational amplifier, a type of analog amplifier and signal-conditioning IC. The primary feature of this device is its four-channel architecture within a 14-pin package. The LM2902MX family is associated with supply operation extending to ±16 V or 32 V total, covering conventional single-supply and dual-supply industrial circuit environments. The onsemi LM2902MX listing identifies the device as a standard general-purpose amplifier with four circuits in a 14-pin SOP package. As a general-purpose quad amplifier, the LM2902MX-ON can implement four common analog functions on one board. Individual channels may be used as non-inverting or inverting amplifiers, buffers, comparators, or active filters when operated within their electrical limits. Because each channel shares the same package, bypassing, and supply connections, designers should pay particular attention to power-supply decoupling and channel-to-channel feedback isolation. Typical applications include industrial sensor conditioning, instrumentation, analog measurement systems, control loops, and general PCB signal amplification. The four-channel organization is especially useful when a board requires several similar low-frequency signal-processing stages. In such designs, the device can reduce footprint requirements while simplifying assembly compared with four separate single op-amp packages. A key design consideration is decoupling. Place a supply bypass capacitor close to the device supply pins and keep input and output routing short to reduce noise pickup and unstable feedback behavior. Load capacitance, output-current demand, common-mode range, and supply sequencing must also be checked against the manufacturer's operating limits before the amplifier is used in a new circuit. This product page combines the confirmed LM2902MX-ON device identity with package-level information, verified substitute references, practical circuit guidance, and engineering-oriented comparisons. It helps designers determine whether a candidate has the required four-channel, 14-pin architecture and helps narrow the next step to electrical verification using the manufacturer datasheet.

RFQ Contact
LM2902MX/NOPB - 26V 1.2MHz Quad Op Amp | Texas Instruments
LM2902MX/NOPB

LM2902MX/NOPB - 26V 1.2MHz Quad Op Amp | Texas Instruments

Texas Instruments LM2902MX/NOPB is a low-power, internally frequency-compensated, quad operational amplifier designed for single-supply operation across a wide voltage range. The device provides four amplifier channels in a 14-pin SOIC package, with a 1.2 MHz gain-bandwidth product, 2 mV typical input offset voltage, and approximately 0.5 V/us slew rate. Its high-voltage operating capability makes it useful in industrial control, instrumentation, sensor conditioning, audio, and power-supply feedback circuits. The LM2902MX/NOPB is identified as a standard general-purpose amplifier, while the LM2902 family is also described as a quad, 26 V operational amplifier with 1.2 MHz bandwidth. An operational amplifier is an analog signal-conditioning integrated circuit that uses high open-loop gain to amplify the difference between two input voltages. The LM2902 contains four independent amplifier sections with internal frequency compensation, allowing stable operation in common noninverting, inverting, summing, comparator, and feedback configurations. Its low-power design is intended for battery-powered and general-purpose systems where a wide supply-voltage range is more valuable than high-speed performance. Key features include a 3 V to 32 V single-supply operating range, a 26 V maximum total supply voltage, 1.2 MHz gain-bandwidth product, 2 mV typical input offset voltage, and approximately 0.5 V/us slew rate. The four-channel architecture reduces component count and board area when multiple analog signals require conditioning. The 14-pin SOIC package is also available in related LM2902 order variants, making footprint planning important when selecting an exact replacement. The LM2902 family uses a bipolar voltage-feedback architecture. Internal compensation removes the need for an external frequency-compensation capacitor in typical closed-loop configurations. The device can operate from a single positive supply or from split positive and negative supplies. Its relatively modest bandwidth makes it appropriate for slower control and measurement loops rather than high-speed video, RF, or precision signal-chain applications. Typical uses include transducer and sensor conditioning, low-frequency active filters, current-loop and voltage-feedback control, audio preamplification, battery-powered instrumentation, and general analog signal processing. The wide supply range also permits operation from industrial 24 V systems when the total supply voltage remains within the device rating. Designers should account for input common-mode range, output swing, input bias current, and stable feedback-network selection when using the amplifier near its voltage limits. A key design consideration is the relationship between supply voltage, input range, and output swing. A nominal 3 V minimum supply does not mean the input and output can reach every rail voltage, so the signal amplitudes must remain inside the amplifier's specified common-mode and output ranges. Decoupling capacitors should be placed close to the supply pins, and feedback resistors should be selected to keep closed-loop gain and noise performance appropriate for the application. This product page combines the manufacturer's LM2902 product information, distributor references, package identification, and practical guidance for signal conditioning, supply bypassing, common-mode limits, and replacement planning.

RFQ Contact
LM2902N - Quad 26V 1MHz Op Amp | Texas Instruments
LM2902N

LM2902N - Quad 26V 1MHz Op Amp | Texas Instruments

The Texas Instruments LM2902N is a quad, general-purpose operational amplifier in a 14-pin DIP package, with four independent amplifiers per device. The verified source data identifies it as a 26 V maximum supply part with 1 MHz gain-bandwidth behavior, making it suitable for low-cost signal conditioning, instrumentation, and control circuits. The LM2902N combines independent high-gain stages with internally compensated operation from a single supply, while the DIP package supports through-hole assembly and conventional prototype or repair workflows. An operational amplifier is an analog integrated circuit that uses differential input and feedback to control an output voltage. In the broader electronics hierarchy, an op amp belongs to the amplifier-IC family, performs closed-loop signal amplification, and commonly supports filtering, buffering, level shifting, sensing, and control applications. A quad package provides four amplifiers in one IC, reducing component count while preserving separate signal paths where independent channels are useful. The verified product information specifically describes the LM2902-N as a quad 26 V, 1 MHz operational amplifier. The LM2902 family is associated with wide single-supply operation, internally frequency-compensated amplifiers, and general-purpose analog designs. These characteristics are useful when a board needs four amplifier channels with moderate bandwidth rather than a high-speed precision device. Because the available data does not provide the complete electrical tables, detailed input-bias-current, output-swing, noise, and common-mode specifications must be verified in the manufacturer datasheet before production release. Typical uses include sensor conditioning, low-frequency active filters, industrial control loops, audio preamplifier stages, and general-purpose analog signal paths. The 14-pin DIP outline is appropriate when the design uses a through-hole footprint or a manually assembled educational or industrial prototype. Designers should confirm the exact pinout, supply limits, common-mode range, output drive, and stability requirements for the intended operating point rather than relying only on the family-level description. A key design consideration is decoupling: place the supply bypass capacitor close to the device power pins and provide a stable, low-impedance return path. Input and feedback components should be arranged to minimize parasitic pickup and unwanted oscillation. This page distinguishes verified LM2902-N facts from unspecified parameters, making it a practical starting point for procurement and engineering review. The LM2902N combines four channels, a 26 V supply class, and a 1 MHz operating-speed class in a through-hole 14-pin DIP. This combination supports cost-sensitive analog designs where external compensation, rail-to-rail operation, or high bandwidth is not required.

RFQ Contact
LM2902N-MAND - 26V 1MHz Quad Op Amp | Texas Instruments
LM2902N-MAND

LM2902N-MAND - 26V 1MHz Quad Op Amp | Texas Instruments

Texas Instruments LM2902N-MAND is a four-amplifier operational-amplifier IC designed for general-purpose analog signal conditioning. The LM2902 family is specified for operation from a single 3 V to 26 V supply, with a 1 MHz gain-bandwidth product, and is offered in a 14-pin through-hole dual in-line package. Each of the four amplifiers is independently frequency compensated and can operate from single-supply or split-supply configurations. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its non-inverting and inverting inputs. The quad operational amplifier belongs to the broader hierarchy of operational amplifier, analog amplifier, analog signal-processing IC, and semiconductor. Its four independent channels make one package practical for buffering, amplification, active filtering, comparators, instrumentation stages, and control loops that require several similar analog functions. The principal family-level characteristics are a 26 V maximum supply rating, 1 MHz unity-gain bandwidth, four amplifier circuits, and a 14-pin PDIP package. Push-pull output capability supports output swing above the negative supply rail under suitable load conditions. These characteristics are especially useful in industrial equipment where a higher supply rating and low-cost general-purpose amplification can simplify the power architecture. Each amplifier uses internal frequency compensation, eliminating the need for an external compensation network in typical closed-loop configurations. The same basic amplifier can be used as a non-inverting stage with high input impedance, an inverting stage with a defined gain, or a voltage follower for buffering. With a 1 MHz gain-bandwidth product, practical closed-loop bandwidth depends on the selected noise gain, while stability and output behavior must be evaluated with the actual load and supply conditions. Typical uses include sensor interfaces, transducer signal conditioning, active analog filters, industrial controls, audio preamplification, feedback networks, and general signal conditioning. The wide supply range permits operation from industrial 24 V systems when the total supply remains within the 26 V rating, while lower-supply operation supports lower-energy systems. Four channels can reduce package count when the circuit contains multiple independent analog paths. Designers should verify the exact suffix-specific ordering information, operating-temperature grade, and pin marking before production release. Decoupling capacitors should be placed close to the supply pins, signal traces should avoid nearby switching nodes, and unused amplifier channels should be configured according to the manufacturer guidance rather than left floating. Input and output voltage, current, stability, and common-mode limits must be checked at the intended supply voltage. This product page combines the manufacturer product identity, verified distributor information, package-level details, drop-in sourcing options, and application guidance. It also highlights the practical trade-offs between the family-level LM2902N and other quad operational amplifiers, helping engineers evaluate PCB reuse, supply-voltage tolerance, bandwidth, sourcing, and functional fit before finalizing a bill of materials.

RFQ Contact
LM2902N/NOPB - Quad 26V 1MHz Op Amp | Texas Instruments
LM2902N/NOPB

LM2902N/NOPB - Quad 26V 1MHz Op Amp | Texas Instruments

Texas Instruments LM2902N/NOPB is a quad general-purpose operational amplifier rated for a 3 V to 26 V supply range, with four independent amplifiers and a 1 MHz unity-gain bandwidth. The device is offered in a 14-pin PDIP package and is specified for operation from -40 °C to 85 °C. Its four amplifiers are internally frequency compensated, allowing straightforward implementation of amplifier, comparator, buffer, and feedback-control circuits. An operational amplifier is an analog signal-conditioning IC that uses high open-loop gain and negative feedback to amplify voltage differences. The quad-amplifier configuration places four independent operational amplifiers in one package, reducing component count and board area where multiple analog channels are required. Within the power-management hierarchy, an LM2902N/NOPB belongs to the linear integrated-circuit family, while functionally it serves as an analog signal-processing IC for instrumentation, control, and interface circuits. Key characteristics include four independent channels, a 26 V maximum supply rating, 1 MHz gain-bandwidth performance, and approximately 0.5 V/µs slew rate. The internally compensated architecture avoids external frequency-compensation components in ordinary closed-loop applications. Input and output arrangements follow the conventional dual-inline operational-amplifier pinout, allowing each channel to be used independently as long as the unused amplifier is configured safely. The wide single-supply operating range allows the device to operate from industrial and automotive-related 12 V rails, provided the supply remains within the 26 V rating. Its 1 MHz bandwidth is appropriate for low-frequency control loops, transducers, analog interfaces, and general-purpose signal conditioning rather than high-speed video or communications channels. The PDIP package also supports through-hole assembly and hand prototyping. Typical applications include four-channel sensor amplification, industrial process-control loops, bridge-signal conditioning, audio preamplification, active filtering, and general analog computation. Each channel can also serve as a comparator when configured with suitable positive feedback, although the output-stage behavior and saturation recovery should be evaluated for the target circuit. When laying out a board, place the device away from switching nodes and high-current return paths, provide a local supply bypass capacitor close to the power pin, and route high-impedance input traces away from output and clock signals. Check input and output common-mode limits, output-current demand, thermal dissipation, and supply stability against the manufacturer datasheet before releasing the design. This product page combines the exact orderable part information with practical package, application, replacement, and circuit-layout guidance. It also distinguishes the 14-pin PDIP target from surface-mount family members so engineers can avoid selecting a mechanically incompatible substitute.

RFQ Contact
LM2902N/PB - Quad 26V 1MHz Op Amp | Texas Instruments (Lead-Free (Pb-Free))
LM2902N/PB

LM2902N/PB - Quad 26V 1MHz Op Amp | Texas Instruments (Lead-Free (Pb-Free))

The Texas Instruments LM2902N/PB is a quad, general-purpose operational amplifier in a 14-pin DIP package, with four independent amplifiers per device. The verified source data identifies it as a 26 V maximum supply part with 1 MHz gain-bandwidth behavior, making it suitable for low-cost signal conditioning, instrumentation, and control circuits. The LM2902N/PB combines independent high-gain stages with internally compensated operation from a single supply, while the DIP package supports through-hole assembly and conventional prototype or repair workflows. An operational amplifier is an analog integrated circuit that uses differential input and feedback to control an output voltage. In the broader electronics hierarchy, an op amp belongs to the amplifier-IC family, performs closed-loop signal amplification, and commonly supports filtering, buffering, level shifting, sensing, and control applications. A quad package provides four amplifiers in one IC, reducing component count while preserving separate signal paths where independent channels are useful. The verified product information specifically describes the LM2902-N as a quad 26 V, 1 MHz operational amplifier. The LM2902 family is associated with wide single-supply operation, internally frequency-compensated amplifiers, and general-purpose analog designs. These characteristics are useful when a board needs four amplifier channels with moderate bandwidth rather than a high-speed precision device. Because the available data does not provide the complete electrical tables, detailed input-bias-current, output-swing, noise, and common-mode specifications must be verified in the manufacturer datasheet before production release. Typical uses include sensor conditioning, low-frequency active filters, industrial control loops, audio preamplifier stages, and general-purpose analog signal paths. The 14-pin DIP outline is appropriate when the design uses a through-hole footprint or a manually assembled educational or industrial prototype. Designers should confirm the exact pinout, supply limits, common-mode range, output drive, and stability requirements for the intended operating point rather than relying only on the family-level description. A key design consideration is decoupling: place the supply bypass capacitor close to the device power pins and provide a stable, low-impedance return path. Input and feedback components should be arranged to minimize parasitic pickup and unwanted oscillation. This page distinguishes verified LM2902-N facts from unspecified parameters, making it a practical starting point for procurement and engineering review. The LM2902N/PB combines four channels, a 26 V supply class, and a 1 MHz operating-speed class in a through-hole 14-pin DIP. This combination supports cost-sensitive analog designs where external compensation, rail-to-rail operation, or high bandwidth is not required.

RFQ Contact
LM2902NG - 4-Channel 1MHz Op Amp in 14-PDIP | onsemi
LM2902NG

LM2902NG - 4-Channel 1MHz Op Amp in 14-PDIP | onsemi

onsemi LM2902NG is a four-channel, general-purpose operational amplifier in a 14-pin PDIP package. The device provides true differential inputs, a 1 MHz gain-bandwidth product, approximately 40 mA output current, 50 dB minimum common-mode rejection, and a typical input offset voltage of 7 mV. Its four amplifiers are designed for instrumentation, buffering, signal conditioning, and general analog signal-processing systems operating from a single supply. An operational amplifier, or op amp, is a high-gain differential-input amplifier that uses negative feedback to control gain and improve linearity. In the product hierarchy, the LM2902NG belongs to the general-purpose operational-amplifier class, within analog amplifier ICs and integrated circuits. Unlike rail-to-rail precision amplifiers, this device is intended primarily for conventional supply rails where adequate input and output common-mode ranges are available. The four integrated channels make the LM2902NG useful where several independent low-frequency analog functions are required. Its 1 MHz bandwidth supports general-purpose gain and signal conditioning above DC, while true differential inputs suit instrumentation and feedback networks. The 7 mV typical input offset and 50 dB minimum CMRR should be considered when precision requirements are moderate rather than stringent. Each amplifier includes the internal characteristics expected of a practical general-purpose quad op amp, including differential input support, output drive capability, and operation from a single power supply. The 14-pin PDIP format facilitates inspection, prototyping, and through-hole assembly. Designers requiring a surface-mount implementation should select a compatible alternative package rather than attempting to mount the PDIP directly. Typical applications include sensor-signal conditioning, low-level signal buffering, active filtering, transducer-interface circuits, test equipment, industrial control systems, and educational instrumentation. The four-channel organization can reduce component count and simplify board allocation when an analog subsystem needs two or more gain stages. Design with the supply voltage, common-mode input range, output swing, and output-current limits defined by the manufacturer datasheet. Decoupling capacitors should be placed close to the supply pins, and input, feedback, and output routing should avoid long traces susceptible to noise pickup. This product page combines manufacturer and distributor technical details, package guidance, application analysis, replacement criteria, and PCB-oriented design notes. It is intended to help engineers identify whether the LM2902NG's four-channel architecture and 14-PDIP footprint fit a single-supply analog design before committing to a BOM.

RFQ Contact
LM2902NS - Quad 26V 1.2MHz Op Amp | Texas Instruments
LM2902NS

LM2902NS - Quad 26V 1.2MHz Op Amp | Texas Instruments

Texas Instruments LM2902NS is a general-purpose quad operational amplifier integrating four independent amplifier circuits in a 14-pin SOIC package. The device is designed for a 26 V maximum supply rating, a 1.2 MHz gain-bandwidth product, and an input offset voltage of 2 mV. Its four-amplifier configuration allows one device to implement multiple signal-conditioning, comparison, filtering, or control functions while conserving board area. An operational amplifier is a high-gain, internally compensated differential-input amplifier used to amplify voltage differences, buffer signals, compare thresholds, and drive feedback networks. The LM2902NS belongs to the operational-amplifier hierarchy, where it is also classified as a general-purpose amplifier, analog amplifier, and linear integrated circuit. Its integrated quad arrangement makes it suitable when four similar amplifier channels are required rather than four separate single or dual packages. The four internal circuits provide the principal functional advantage of the LM2902NS. A single package can support four independent signal paths, reducing component count and simplifying PCB layout when the same amplifier type is used throughout a subsystem. The 26 V supply rating provides headroom for industrial and automotive-style control environments, while the 1.2 MHz bandwidth supports applications from DC precision amplification to moderate-frequency signal processing. Texas Instruments identifies the LM2902NS as a standard general-purpose amplifier with four circuits in a 14-SO package. Its 2 mV maximum input offset voltage is relevant when the application compares small sensor voltages against references or develops low-level control signals. Because the four amplifiers are independent, their input and output pins can support separate analog channels rather than requiring a common signal path. Typical uses include four-channel sensor conditioning, precision threshold comparison, current-loop signal conditioning, industrial process-control interfaces, buffered instrumentation, and general embedded analog signal processing. In each case, the integrated quad topology reduces the number of amplifiers needed while retaining independent channel routing and common package-level supply handling. PCB design should preserve analog signal integrity by keeping input and output routing short, decoupling the supply pins close to the device, and avoiding current injection beneath the package. Confirm input common-mode range, output swing, supply limits, stability requirements, and channel-specific bandwidth needs against the manufacturer datasheet before finalizing the circuit. This page combines the Texas Instruments product description, exact-order MPN information, package details, verified source listings, and practical selection guidance. It also distinguishes same-package replacement candidates from broader functional alternatives so engineers can assess footprint compatibility, bandwidth, offset voltage, and supply capability before changing an approved BOM.

RFQ Contact
LM2902NS-MAND - Quad 26 V 1 MHz Op Amp | Texas Instruments
LM2902NS-MAND

LM2902NS-MAND - Quad 26 V 1 MHz Op Amp | Texas Instruments

The Texas Instruments LM2902NS-MAND is a general-purpose quad operational amplifier with four amplifier circuits in a 14-pin SO package. The LM2902-N family operates from a single supply up to 26 V, delivers a gain-bandwidth product of 1 MHz, and is designed for general-purpose signal conditioning across industrial, automotive, and embedded applications. Its four independent channels allow multiple analog signals to be amplified within one compact package. An operational amplifier, commonly called an op amp, is a high-gain analog building block used in voltage amplification, filtering, buffering, comparison, and feedback-control circuits. The LM2902 belongs to the voltage-feedback operational-amplifier family, within the broader linear and power-management semiconductor hierarchy. Its integrated amplifier circuits depend on stable supply rails and carefully selected external feedback components. The headline features of the LM2902NS-MAND are its four-circuit configuration, 26 V maximum supply rating, and 1 MHz gain-bandwidth product. The integrated quad arrangement reduces the number of packages and PCB connections required when several low-frequency analog functions must be implemented. The 14-pin SO package also supports conventional surface-mount assembly methods used in high-volume electronic assemblies. The LM2902-N family provides practical performance for general-purpose analog designs rather than specialized low-noise or high-speed operation. A 1 MHz gain-bandwidth product is appropriate for audio-frequency signal paths, sensor conditioning, error amplifiers, and control loops that do not require the bandwidth of modern rail-to-rail precision amplifiers. Its 26 V supply capability also allows operation from higher-voltage rails than conventional 5 V or 3.3 V analog systems. Typical uses include four-channel sensor interfaces, buffered instrumentation inputs, industrial control signals, automotive electronics, audio preamplification, and general feedback-control blocks. In a typical circuit, each channel uses external resistors or capacitors to define gain, filtering, or integration behavior. Power-supply bypassing remains important because every amplifier channel shares the same package and supply pins. For new layouts, check the complete pin-description and recommended operating tables in the manufacturer datasheet before assigning connections. Keep input and output traces away from switching nodes, provide local supply bypassing, and verify common-mode, output-swing, and stability limits across the intended supply range. The quad package is especially useful when matched channel count and board area matter more than precision or rail-to-rail operation. This product overview combines the device architecture with practical application guidance, package information, sourcing details, and a comparison of documented drop-in alternatives. It also identifies where engineers must review the exact orderable suffix, supply conditions, and channel-level electrical limits before releasing a production design.

RFQ Contact
LM2902NSR - Quad 26V 1.2MHz Op Amp | Texas Instruments (Tape & Reel)
LM2902NSR

LM2902NSR - Quad 26V 1.2MHz Op Amp | Texas Instruments (Tape & Reel)

Texas Instruments LM2902NSR is a general-purpose quad operational amplifier integrating four independent amplifier circuits in a 14-pin SOIC package. The device is designed for a 26 V maximum supply rating, a 1.2 MHz gain-bandwidth product, and an input offset voltage of 2 mV. Its four-amplifier configuration allows one device to implement multiple signal-conditioning, comparison, filtering, or control functions while conserving board area. An operational amplifier is a high-gain, internally compensated differential-input amplifier used to amplify voltage differences, buffer signals, compare thresholds, and drive feedback networks. The LM2902NSR belongs to the operational-amplifier hierarchy, where it is also classified as a general-purpose amplifier, analog amplifier, and linear integrated circuit. Its integrated quad arrangement makes it suitable when four similar amplifier channels are required rather than four separate single or dual packages. The four internal circuits provide the principal functional advantage of the LM2902NSR. A single package can support four independent signal paths, reducing component count and simplifying PCB layout when the same amplifier type is used throughout a subsystem. The 26 V supply rating provides headroom for industrial and automotive-style control environments, while the 1.2 MHz bandwidth supports applications from DC precision amplification to moderate-frequency signal processing. Texas Instruments identifies the LM2902NSR as a standard general-purpose amplifier with four circuits in a 14-SO package. Its 2 mV maximum input offset voltage is relevant when the application compares small sensor voltages against references or develops low-level control signals. Because the four amplifiers are independent, their input and output pins can support separate analog channels rather than requiring a common signal path. Typical uses include four-channel sensor conditioning, precision threshold comparison, current-loop signal conditioning, industrial process-control interfaces, buffered instrumentation, and general embedded analog signal processing. In each case, the integrated quad topology reduces the number of amplifiers needed while retaining independent channel routing and common package-level supply handling. PCB design should preserve analog signal integrity by keeping input and output routing short, decoupling the supply pins close to the device, and avoiding current injection beneath the package. Confirm input common-mode range, output swing, supply limits, stability requirements, and channel-specific bandwidth needs against the manufacturer datasheet before finalizing the circuit. This page combines the Texas Instruments product description, exact-order MPN information, package details, verified source listings, and practical selection guidance. It also distinguishes same-package replacement candidates from broader functional alternatives so engineers can assess footprint compatibility, bandwidth, offset voltage, and supply capability before changing an approved BOM.

RFQ Contact
LM2902PW - Quad 26V 1.2MHz Op-Amp TSSOP-14 | Texas Instruments
LM2902PW

LM2902PW - Quad 26V 1.2MHz Op-Amp TSSOP-14 | Texas Instruments

The Texas Instruments LM2902PW is a quadruple general-purpose operational amplifier with a 26 V supply rating, 1.2 MHz gain-bandwidth product, and 2 mV maximum input offset voltage, housed in a 14-pin TSSOP (PW) package rated from -40C to +125C. An operational amplifier (op amp) is a high-gain voltage amplifier with differential inputs and a single-ended output, the most widely used building block in analog electronics. Within the power-management and signal-chain hierarchy, the quad op amp consolidates four amplifiers in one IC, reducing board area, BOM count, and matched-channel drift. The LM2902 family belongs to the industry-standard LM324/LM2902 lineage of single-supply op amps whose common-mode input range includes ground, allowing direct sensing of signals near 0 V. Key features include a wide supply range (single supply or dual supplies up to +/-13 V for LM324 variants, 26 V total for LM2902), low supply-current drain of approximately 0.8 mA per amplifier that is largely independent of supply voltage, and ground-sensing common-mode input. According to TI, the newer LM2902B version is a drop-in replacement for all versions of LM224, LM324, and LM2902, with improved offset (3 mV for the B version) and a supply range extended to 36 V on B and BA versions. Architecturally, the LM2902 uses internally compensated bipolar circuitry with class-AB output stages that swing to within a few hundred millivolts of the negative rail, supporting outputs near ground without an external negative supply. The 1.2 MHz bandwidth and 0.4 V/us-class slew rate suit low-frequency conditioning, filtering, and comparison tasks rather than high-speed signal chains. Typical applications include industrial sensor signal conditioning (transimpedance and non-inverting amplifiers), automotive sensing front-ends benefiting from the -40C to +125C rating, active filter networks, and battery-powered instrumentation where four matched channels and low quiescent current matter. Design consideration: keep output loading light and allow headroom near the rails - output swing approaches but does not reach the positive supply, so clamp circuit expectations accordingly and verify offset-induced error in high-gain stages. This page adds value beyond the manufacturer datasheet by combining distributor cross-references, drop-in replacement options, application guidance, and procurement FAQs in one place.

RFQ Contact
LM2902PWR - Quad 36V 1.2MHz Op Amp | Texas Instruments
LM2902PWR

LM2902PWR - Quad 36V 1.2MHz Op Amp | Texas Instruments

Texas Instruments LM2902PWR is a quad general-purpose operational amplifier designed for single-supply or split-supply operation, with four high-voltage amplifiers in a 14-pin TSSOP package. Its headline characteristics include a 26 V nominal supply range, 1.2 MHz gain-bandwidth product, and approximately 2 mV input offset voltage. An operational amplifier is an analog signal-processing IC that uses differential feedback to amplify the difference between its inverting and non-inverting inputs. The LM2902 belongs to the hierarchy of operational amplifier, analog amplifier, analog signal IC, and semiconductor. Four independent channels in one package simplify designs requiring several amplifiers, while reducing the number of PCB components compared with four single-amplifier packages. The LM2902 provides four independent, internally compensated amplifiers with a common-mode input range that can extend to ground. This is useful in battery-powered and single-supply circuits where signals may remain near the lower supply rail. Its 1.2 MHz gain-bandwidth product supports general-purpose signal conditioning, including audio-frequency amplification, buffering, comparison functions, active filters, and sensor-interface stages. The wide supply capability distinguishes the LM2902 from low-voltage rail-to-rail amplifiers commonly used in compact battery-powered electronics. A nominal 26 V operating range and operation up to 36 V allow the same device family to address industrial control, instrumentation, and power-supply support circuits where higher-voltage signals and supplies may be present. The device is not intended to replace precision or rail-to-rail input amplifiers when sub-millivolt accuracy is required. Typical uses include four-channel audio preamplification, low-frequency active filters, transducer conditioning, current-loop interfaces, and general instrumentation. Because each amplifier is independent, the four channels can also perform different functions on one board. Decoupling capacitors should be placed close to the supply pins, and unused amplifier channels should be configured according to the manufacturer’s recommended stable-input arrangement. For a 14-TSSOP implementation, verify the complete pin map and thermal pad treatment against the manufacturer datasheet before layout release. The principal design trade-off is the combination of high-voltage tolerance and unity-gain stability versus the lower bandwidth, higher offset, and lack of rail-to-rail operation associated with this classic general-purpose amplifier architecture. This page combines the key operating characteristics, package information, sourcing guidance, drop-in alternatives, and practical circuit considerations needed to evaluate the LM2902PWR in industrial, instrumentation, audio, and embedded analog designs.

RFQ Contact