Products (44,000+)

LPC1833JBD144 - 180MHz Cortex-M3 MCU, 512KB Flash, LQFP-144 | NXP
LPC1833JBD144

LPC1833JBD144 - 180MHz Cortex-M3 MCU, 512KB Flash, LQFP-144 | NXP

The NXP LPC1833JBD144 is a high-performance 32-bit ARM Cortex-M3 MCU operating at up to 180 MHz, equipped with 512 kB flash, 136 kB SRAM, dual High-Speed USB, Ethernet MAC, and an integrated LCD controller, housed in a 144-pin LQFP package. It belongs to the LPC18xx family of microcontrollers designed for embedded applications requiring substantial connectivity and processing headroom. A 32-bit microcontroller (MCU) is a single-chip computer integrating a CPU core, program memory, data memory, and programmable peripherals. The LPC18xx family occupies the high-performance tier of NXP's Cortex-M3 lineup, sitting between the mainstream LPC15xx/LPC17xx and the dual-core LPC40xx, typically used in industrial HMI, USB peripherals, and connectivity gateways. Key features of the LPC1833JBD144 include Cortex-M3 core at 180 MHz, two High-Speed USB 2.0 OTG controllers (one with on-chip HS PHY), 10/100 Ethernet MAC, an LCD controller supporting STN/TFT panels, dual SPI/I2C, UART, CAN, 4 kB EEPROM emulation in flash, and a 4 MB address space via the external memory controller. Power is supplied from a 2.4V to 3.6V rail, with deep-sleep and power-down modes for battery-sensitive designs. Architecturally, the LPC1833 uses a 3-stage pipeline Cortex-M3 core with NVIC supporting up to 32 priority levels, a dedicated DMA controller, and a multilayer AHB bus matrix that allows simultaneous CPU and peripheral transfers. The on-chip HS USB PHY eliminates external transceiver parts, reducing both BOM and PCB area, while the EMC (External Memory Controller) allows expansion to SDRAM or SRAM up to 4 MB. Typical applications include industrial HMI panels using the integrated LCD controller, USB device/host peripherals such as card readers or instrumentation, Ethernet-connected sensor hubs, and motor-control reference designs. The wide peripheral mix is well-suited to multi-protocol gateways and point-of-sale terminals. When designing with the LPC1833JBD144, ensure the PCB exposes the JTAG/SWD pins for debug access and provide adequate decoupling (100 nF + 4.7 µF) near each VDD/VSS pair. The LQFP-144 footprint has lower thermal performance than QFN/BGA; for sustained high-current peripherals, route multiple internal power/ground planes. This page synthesizes distributor pricing, drop-in alternatives within the LPC18xx family, and practical design notes that complement the manufacturer's datasheet and shorten time-to-prototype for LPC18xx-based designs.

RFQ Contact
LPC1833JBD144E - 180MHz Cortex-M3 MCU, 512KB Flash | NXP
LPC1833JBD144E

LPC1833JBD144E - 180MHz Cortex-M3 MCU, 512KB Flash | NXP

The NXP LPC1833JBD144E is a high-performance 32-bit Arm Cortex-M3 microcontroller with 512 KB of on-chip flash and 136 KB of SRAM, housed in a 144-pin LQFP (20x20 mm) package. It operates at CPU frequencies up to 180 MHz and integrates two high-speed USB 2.0 controllers (one Host, one Host/Device), a 10/100 Ethernet MAC, an external memory controller, and a rich set of serial peripherals including UART, SPI, I2C, and CAN. The 'E' suffix denotes an extended-temperature grade suitable for industrial environments. An Arm Cortex-M3 microcontroller is a 32-bit MCU core designed by Arm for deterministic embedded applications. Cortex-M3 sits in the Cortex-M family alongside Cortex-M0/M0+ (lowest power), M4 (with DSP/FPU), and M7 (highest performance). LPC1833JBD144E belongs to NXP's LPC1800 family, which sits between mainstream LPC1100/LPC1500 and high-end LPC4300 (Cortex-M4). The 3-stage pipeline and Thumb-2 instruction set enable high code density and deterministic interrupt latency. Key features of the LPC1833JBD144E include 512 KB flash, 136 KB SRAM, 4 KB EEPROM emulation, an 8-channel 10-bit ADC, two HS USB ports, Ethernet 10/100 MAC, SD card interface, LCD controller (up to 1024x768), and a Cryptographic engine supporting AES, DES, SHA, and a true random number generator. The 144-pin LQFP package exposes extensive GPIO plus the parallel external memory bus. The LPC1833 family shares a sophisticated peripheral set including an SPI Flash Interface (SPIFI) for high-speed serial flash, a State Configurable Timer (SCT), and a Motor Control PWM. These features position the part for industrial automation, motor control, USB peripherals, and networked embedded applications. Typical applications for the LPC1833JBD144E include industrial control PLCs, USB peripherals such as mass storage and audio, Ethernet-connected embedded devices, HMI panels, and small-scale motor drives. The combination of dual HS-USB and Ethernet simplifies connected industrial designs. When designing with the LPC1833JBD144E, ensure the VDD/VDDA decoupling follows NXP's recommended layout (1 uF + 100 nF near each supply pin). The wide operating range (2.2V to 3.6V) simplifies power design. The 'E' temperature grade supports -40C to +105C ambient. Verify boot source strapping for ISP/UART/SPIFI on reset release. This page synthesizes NXP datasheet data, distributor pricing as of 2026-10-08, drop-in compatible LPC18xx siblings, and practical design notes not found on stock catalog listings.

RFQ Contact
LPC1833JET100E - 180MHz Cortex-M3 MCU with USB | NXP
LPC1833JET100E

LPC1833JET100E - 180MHz Cortex-M3 MCU with USB | NXP

The NXP Semiconductors LPC1833JET100E is a high-performance 32-bit Arm Cortex-M3 microcontroller operating up to 180 MHz, with 512 kB of flash memory, 136 kB of SRAM, Ethernet, and two high-speed USB interfaces in a 100-ball TFBGA package measuring 9 mm by 9 mm. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, volatile data memory, and peripherals into one compact device. The LPC1833JET100E belongs to the MCU, embedded processor, and semiconductor hierarchy. Its Cortex-M3 core combines a 32-bit architecture with an efficient instruction set suited to embedded control, while its Ethernet and high-speed USB connectivity allows the same device to manage communications as well as real-time control functions. The device provides 512 kB of flash for firmware and 136 kB of SRAM for working data. Two high-speed USB interfaces reduce the need for additional USB controllers in designs requiring multiple USB connections. Integrated Ethernet similarly supports network-connected equipment without requiring a separate Ethernet interface IC. These capabilities make the LPC1833JET100E suitable for industrial gateways, USB-to-Ethernet equipment, data acquisition systems, and connected embedded controllers. The LPC18xx family is based on the Arm Cortex-M3 architecture and is positioned for embedded applications requiring high performance, substantial memory, Ethernet, USB, and LCD-related connectivity. Two high-speed USB interfaces and Ethernet provide the most distinctive connectivity combination in the verified product information, while the 180 MHz operating speed gives the processor more compute headroom than many lower-frequency embedded controllers. Typical implementations include industrial Ethernet bridges, USB hubs and peripheral controllers, connected test equipment, network interface modules, and multifunction embedded platforms. A design can place the MCU directly at the center of an Ethernet-enabled control system and use its two USB interfaces for either two peripheral roles or a host/device combination, depending on the required system topology. PCB implementation requires careful BGA layout, power and ground distribution, and signal-integrity management. Although the 9 mm by 9 mm TFBGA-100 package supports compact designs, its 100 terminals require adequate escape routing and via density. Firmware and peripheral assignments must also be reviewed against the manufacturer datasheet before production release. This page consolidates verified manufacturer and distributor information, package details, pricing references, same-family replacement considerations, and practical design guidance. It also distinguishes confirmed drop-in candidates from devices that may share a package without providing a complete functional replacement.

RFQ Contact
LPC1833JET256 - 32-bit ARM Cortex-M3 MCU, 512KB Flash, 180MHz | NXP
LPC1833JET256

LPC1833JET256 - 32-bit ARM Cortex-M3 MCU, 512KB Flash, 180MHz | NXP

The NXP Semiconductors LPC1833JET256 is a high-performance 32-bit ARM Cortex-M3 microcontroller operating at up to 180 MHz, housed in a 256-ball LBGA (JET) package measuring 17x17 mm. It integrates 512 KB of on-chip flash memory and 136 KB of total SRAM, with peripheral features including Ethernet MAC, two High-speed USB controllers, an LCD controller, and multiple serial interfaces for embedded connectivity applications. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (flash), data memory (SRAM), and integrated peripherals such as timers, ADCs, and communication interfaces. The ARM Cortex-M3 core is a 32-bit RISC processor featuring a 3-stage pipeline, hardware divide, single-cycle multiply, and a Nested Vectored Interrupt Controller (NVIC). The LPC18xx family sits within NXP's hierarchy of ARM-based embedded processors, ranging from low-power Cortex-M0+ parts up to Cortex-M4 parts with DSP and floating-point extensions. Key features of the LPC1833JET256 include: 512 KB flash, 136 KB SRAM, Ethernet MAC with IEEE 1588 support, two High-speed USB 2.0 controllers (one Host, one OTG), an LCD controller supporting STN and TFT panels, four UARTs, three SSP/SPI controllers, two I2C buses, a 10-bit ADC, and an external memory controller (EMC) for SDRAM and SRAM expansion. The device operates from a 2.4V to 3.6V supply and supports industrial temperature range of -40C to +105C. The LPC1833 is fabricated in a low-power CMOS process and integrates a high-bandwidth AHB multilayer matrix that allows concurrent access to flash, SRAM, and peripherals without CPU stalls. Its security features include a unique device serial number, a memory protection unit (MPU), and optional AES encryption via a dedicated hardware block on some family members. The 180 MHz Cortex-M3 delivers approximately 1.25 DMIPS/MHz, providing 225 DMIPS of computational headroom for protocol stacks, real-time control, and signal processing tasks. Typical applications include industrial automation controllers, Ethernet-enabled gateways and IoT edge nodes, HMI panels with TFT displays, USB peripherals and host devices, point-of-sale terminals, and motor control boards. The wide peripheral set makes the LPC1833 a versatile platform for connected embedded products requiring both rich connectivity and deterministic real-time performance. When designing with the LPC1833JET256, allocate sufficient PCB area for the 256-ball LBGA - a 0.8 mm pitch requires 4-layer or 6-layer PCB stack-up with laser-drilled or small-diameter vias for fanout. Decouple each VDD/VSS pair with a 100 nF X7R ceramic capacitor placed within 2 mm of the ball. Use the EMC interface carefully; place series resistors on the SDRAM clock and traces to minimize ringing. This page consolidates distributor pricing, verified drop-in alternatives, and practical design notes that complement the manufacturer datasheet - giving procurement and engineering teams a single reference for evaluating the LPC1833JET256 against competing Cortex-M3 microcontrollers in the same 256-ball LBGA footprint.

RFQ Contact
LPC1837JBD144E - 180MHz Cortex-M3 MCU with 1MB Flash | NXP
LPC1837JBD144E

LPC1837JBD144E - 180MHz Cortex-M3 MCU with 1MB Flash | NXP

The NXP Semiconductors LPC1837JBD144E is a high-performance 32-bit ARM Cortex-M3 microcontroller with a maximum CPU frequency of 180 MHz, 1 MB of flash memory, 136 kB of SRAM, and a 144-pin LQFP package. It is designed for embedded applications that require substantial local memory and a broad set of connectivity peripherals. An ARM Cortex-M3 microcontroller is a 32-bit reduced-instruction-set-computing core designed for embedded control. In the product hierarchy, this MCU belongs to the LPC1800 family and combines a real-time processor, nonvolatile program memory, volatile data memory, and integrated communication peripherals in one integrated circuit. The LPC1837 is positioned for connected industrial equipment, communications equipment, and control systems requiring high processing performance and extensive I/O. The verified device information identifies 1 MB of flash, 136 kB of SRAM, and a 144-LQFP package. The LPC18xx family also includes Ethernet, two high-speed USB interfaces, LCD support, and other connectivity features according to the available manufacturer-family description. These characteristics make the device suitable for human-machine interfaces, protocol gateways, data acquisition systems, and embedded networking platforms. The ARM Cortex-M3 core supports efficient 32-bit processing while retaining a compact embedded architecture. Flash provides nonvolatile firmware storage, while the relatively large SRAM supports buffering, protocol stacks, display interfaces, and real-time workloads. The 144-pin package offers extensive peripheral access compared with smaller MCUs, making board-level pin planning important. Typical applications include industrial Ethernet controllers, USB-connected embedded systems, LCD human-machine interfaces, communications gateways, and multichannel control platforms. The E suffix in LPC1837JBD144E indicates a specified ordering variant; verify temperature grade, packaging, and production status against the current NXP documentation before release to manufacturing. For PCB implementation, use the NXP data sheet for the exact LQFP144 land pattern, power pins, decoupling requirements, and exposed thermal considerations. Do not infer pin compatibility from the package alone: Ethernet, USB, LCD, memory, and peripheral assignments must match the intended board revision and firmware configuration. This product page consolidates verified NXP and distributor information, same-family alternatives, application guidance, and design cautions that are not contained on a basic distributor listing. It is intended to support initial component selection while directing engineers to the authoritative NXP datasheet for final electrical and pin-level verification.

RFQ Contact
LPC1837JET100E - 180MHz Cortex-M3 MCU | NXP Semiconductors
LPC1837JET100E

LPC1837JET100E - 180MHz Cortex-M3 MCU | NXP Semiconductors

NXP Semiconductors LPC1837JET100E is a high-performance 32-bit ARM Cortex-M3 microcontroller operating up to 180 MHz, with 1 MB of flash memory and up to 136 kB of SRAM. The device integrates Ethernet, two high-speed USB interfaces, LCD support, and EMC features in a 100-ball TFBGA package measuring 9 mm by 9 mm. Its combination of processing performance, memory capacity, and communication peripherals supports compact embedded systems that require more connectivity than a basic microcontroller. An ARM Cortex-M3 microcontroller is a 32-bit reduced-instruction-computing core designed for embedded control. Within the product hierarchy, the Cortex-M3 is an ARM processor core, while the LPC1837 is a flash-based microcontroller integrating that core with memory, communications, timing, and GPIO resources. The LPC1800 family architecture gives designers a compact platform for connected industrial, communications, consumer, and control applications without requiring a separate external processor for each protocol function. The LPC1837JET100E combines a maximum CPU frequency of 180 MHz with 1 MB of flash and up to 136 kB of SRAM. Integrated Ethernet supports network-connected equipment, while two high-speed USB interfaces can support host or device peripherals depending on the implemented design. LCD connectivity is also available for human-machine interfaces. These integrated functions reduce system complexity by consolidating communications and display control around one microcontroller. The 100-TFBGA package is designed for compact, high-density assemblies and provides 100 terminals in a 9 mm by 9 mm footprint. NXP identifies the LPC1837JET100 family as active, and distributor information identifies the LPC1837JET100E as an industrial-temperature part in tray packaging. Because the package uses an area-array layout, PCB design must follow the manufacturer’s land pattern, ball assignments, and multilayer construction requirements rather than treating the device as a conventional leaded package. Typical uses include industrial Ethernet controllers, USB-connected data-acquisition equipment, networked embedded modules, and compact HMI systems with LCD output. In these applications, the 180 MHz Cortex-M3 core can process protocol and control tasks, the 1 MB flash supports firmware and embedded resources, and the integrated connectivity reduces external component count. Firmware and peripheral configuration should be validated against the complete NXP data sheet and errata before production release. A critical design step is to use the exact NXP package drawing and pin-multiplexing table for the 100-TFBGA layout. Validate power, ground, decoupling, Ethernet PHY integration, USB routing, and programming access in the PCB stack-up before release. This page combines the available manufacturer and distributor information with engineering-focused selection, application, and integration guidance for the LPC1837JET100E.

RFQ Contact
LPC1853FET256 - 180MHz Cortex-M3 MCU, 512KB | NXP
LPC1853FET256

LPC1853FET256 - 180MHz Cortex-M3 MCU, 512KB | NXP

The NXP Semiconductors LPC1853FET256 is an ARM Cortex-M3 32-bit microcontroller running up to 180 MHz with 512 kB on-chip flash and 136 kB SRAM, housed in a 256-ball LBGA (17x17 mm, SOT570-3 / TFBGA-256) package. It integrates two High-Speed USB controllers, an Ethernet MAC, an LCD controller, an External Memory Controller (EMC), and 118 general-purpose I/O lines, making it a dense single-chip solution for graphics-rich and connectivity-rich embedded applications. An ARM Cortex-M3 microcontroller is a 32-bit RISC core designed by Arm for low-cost, low-power embedded applications. The Cortex-M3 family belongs to the broader category of microcontrollers (MCUs) within the integrated-circuits hierarchy, and it sits between 8/16-bit legacy MCUs and higher-end Cortex-M4/M7 cores. The Cortex-M3 implements the Thumb-2 instruction set, includes a 3-stage pipeline, and offers tightly integrated NVIC interrupt control, positioning the LPC1853FET256 as a step above entry-level Cortex-M0/M0+ parts in computational throughput while remaining more deterministic than Cortex-A application processors. Key features of the LPC1853FET256 include a 180 MHz maximum CPU frequency, 512 kB flash, 136 kB SRAM, two HS-USB (Host/Device/OTG), 10/100 Ethernet MAC, LCD controller supporting STN/TFT panels, an 8-channel 10-bit ADC, four timers, a quadrature encoder interface, and multiple serial interfaces including UART, SPI, I2C, and I2S. The 256-ball LBGA package provides 118 GPIO pins for maximum peripheral parallelism and is supplied from a 2.2 V to 3.6 V rail, simplifying designs that need to mate with 3.3 V logic. The architecture combines the deterministic Cortex-M3 core with on-chip peripherals accessed through an AMBA AHB multilayer matrix. This matrix allows simultaneous DMA and CPU traffic to SRAM, Ethernet, USB, and the LCD controller without bus contention, which is critical for HMI applications where display refresh must coexist with network stack processing. The part supports low-power modes including Sleep, Deep-sleep, Power-down, and Deep Power-down for battery-friendly operation. Typical applications span industrial control panels with TFT LCD + Ethernet connectivity, USB host/device embedded products such as printers and POS terminals, building automation gateways, motor control HMIs, and medical device interfaces. The Ethernet + dual HS-USB combination specifically suits gateway and bridging products where the MCU acts as a protocol translator between field buses and host PCs. A key design consideration is the 256-ball LBGA package, which requires 4-layer or better PCB stack-up with laser-drilled or plugged micro-vias. Ground-bonded thermal vias under the central die-attach pad are recommended for reliable thermal performance at 180 MHz across 4 V operation. Designers should budget for SDRAM (when EMC is enabled) and reserve a QSPI footprint for optional external boot flash.

RFQ Contact
LPC1853JBD208E - 180MHz Cortex-M3 512KB MCU | NXP
LPC1853JBD208E

LPC1853JBD208E - 180MHz Cortex-M3 512KB MCU | NXP

The NXP Semiconductors LPC1853JBD208E is a high-performance 32-bit microcontroller based on the Arm Cortex-M3 core, operating at up to 180 MHz with 512 KB of flash memory in a 208-pin LQFP package measuring 28 mm by 28 mm. The device is designed for embedded systems that require substantial processing speed, integrated connectivity, and a large pin count for external interfaces. It belongs to the LPC1800 family of Cortex-M3 microcontrollers for industrial, communications, consumer, and embedded applications. A microcontroller is a semiconductor containing a processor core, memory, peripherals, and interface controllers on one integrated circuit. The Cortex-M3 architecture uses a 32-bit instruction set and provides an efficient balance of performance, deterministic control, and low power consumption. Within the product hierarchy, this LPC1853 device is a 32-bit MCU, an embedded processor, and a configurable system-on-chip for real-time control and communication designs. Key characteristics include an Arm Cortex-M3 processor running at 180 MHz, 512 KB of program flash, and support for an operating voltage of 3.3 V. The LPC1800 family is also described as supporting Ethernet, two high-speed USB interfaces, LCD connectivity, and EMC-oriented features, making it suitable for designs that combine human-interface or network functions with deterministic embedded control. The 208-pin LQFP provides access to a broad collection of parallel, serial, analog, and communication signals. The large LQFP footprint provides ample routing access but requires careful PCB layout and thermal management. Because a microcontroller integrates high-speed digital circuitry and multiple I/O resources, clocking, power distribution, decoupling, and signal-return paths must be designed as an integrated system. Firmware should also be checked against the device’s clock configuration, memory map, peripheral availability, and pin multiplexing rather than relying only on the processor rating. Typical uses include industrial control panels, USB-connected embedded equipment, Ethernet-capable terminal systems, LCD human-machine interfaces, data acquisition equipment, and connected industrial products. The 180 MHz Cortex-M3 core provides additional headroom for protocol processing, control loops, and graphical or communications workloads. Where the design uses USB, Ethernet, or an LCD, the external interface circuitry and software drivers should be validated against the selected LPC1853 variant and its exposed peripheral configuration. A key design consideration is that the 512 KB flash and SRAM allocation, pin multiplexing, and peripheral availability must be reviewed against the final firmware and PCB requirements before layout release. For a 3.3 V design, validate all supply pins, ground connections, decoupling, and I/O levels against the manufacturer datasheet. The 28 mm by 28 mm LQFP also requires a land pattern with adequate thermal and copper support, while clock and high-speed interface routing demand short return paths and controlled impedance where applicable. This product page combines the verified LPC1853JBD208E identity, package and memory characteristics with practical interface-selection guidance, verified family alternatives, and engineering considerations for evaluating the 208-pin Cortex-M3 MCU in a new embedded design.

RFQ Contact
LPC1857FET256 - 180MHz Cortex-M3 MCU, 1MB Flash | NXP | LBGA-256
LPC1857FET256

LPC1857FET256 - 180MHz Cortex-M3 MCU, 1MB Flash | NXP | LBGA-256

The NXP Semiconductors LPC1857FET256 is a high-performance 32-bit ARM Cortex-M3 microcontroller operating at up to 180 MHz, integrating 1 MB of on-chip flash and 136 kB SRAM, and offered in a 256-pin LBGA (17x17 mm) package. An ARM Cortex-M3 microcontroller is a 32-bit RISC processor core designed for deterministic real-time embedded applications; the Cortex-M3 sits within the ARM Cortex-M family (Cortex-M0/M0+/M3/M4/M7/M33) and is widely used where deterministic interrupt latency, hardware division, and Thumb-2 instruction efficiency are required. The LPC18xx family specifically targets high-throughput connected applications by pairing the Cortex-M3 core with high-speed peripherals including two HS USB ports, an on-chip LCD controller, an Ethernet MAC, and external memory controllers. Positioned within the broader taxonomy: microcontroller -> MCU -> 32-bit MCU -> ARM Cortex-M MCU -> LPC18xx -> LPC1857. Key features of the LPC1857FET256 include 1 MB flash with a flash accelerator, 136 kB total SRAM, two High-Speed USB 2.0 controllers (one with on-chip HS PHY), 10/100 Ethernet MAC, an LCD controller supporting STN and TFT panels up to WXGA, a Quad-SPI Flash Interface (SPIFI), two CAN 2.0B interfaces, three SSP/SPI controllers, one Fast-mode Plus I2C, a 10-bit ADC, a 10-bit DAC, four general-purpose timers, two SCTimer/PWM subsystems, an RTC, and a windowed watchdog timer. The device supports up to 142 GPIO pins with 5 V-tolerant I/O on most pins, an external memory controller (EMC) for SRAM/PSRAM/NOR/NAND, and an SD/MMC interface. The LPC1857FET256 uses a 3.3 V single-supply core with internal LDO regulation, a configurable clock generation unit (PLL) sourced from an external crystal or internal RC, and a power management block that supports Sleep, Deep-Sleep, Power-down, and Deep Power-down modes with multiple wake-up sources including RTC alarm, USB activity, Ethernet Wake-on-LAN, and external interrupts. The dual-bank flash with flash accelerator delivers zero-wait-state execution from flash at full 180 MHz, enabling deterministic code execution for industrial control loops. Typical applications include industrial HMI panels with TFT LCD, factory automation controllers, point-of-sale terminals, USB-enabled embedded peripherals, gateway nodes for industrial Ethernet, motor-control front-ends, secure connected sensors, and rugged portable medical devices where the Cortex-M3 deterministic interrupt latency simplifies safety-critical code paths. When designing with the LPC1857FET256, pay attention to decoupling the LBGA256 power rails: a four-layer PCB with continuous power planes under the BGA is required to achieve the thermal performance and signal integrity the part expects; the SPIFI interface allows low-cost quad-SPI NOR flash expansion without increasing pin count.

RFQ Contact
LPC1857JBD208 - 180MHz Cortex-M3 1MB MCU | NXP
LPC1857JBD208

LPC1857JBD208 - 180MHz Cortex-M3 1MB MCU | NXP

The NXP Semiconductors LPC1857JBD208 is a high-performance 32-bit Arm Cortex-M3 microcontroller with a maximum CPU frequency of 180 MHz, 1 MB of flash memory, and 136 kB of SRAM. It is offered in a 208-pin LQFP package measuring 28 x 28 mm and integrates Ethernet, two high-speed USB interfaces, LCD support, and extensive connectivity for embedded applications. A microcontroller is a programmable integrated circuit that combines a processor core, memory, and peripherals in one device. The LPC1857 belongs to the microcontroller hierarchy: Cortex-M3 processor, embedded MCU, embedded semiconductor, and system-on-chip component. Its integrated peripherals reduce external component count while supporting communications, display, storage, timing, and industrial-control designs. Key features include the Arm Cortex-M3 core, up to 180 MHz operation, 1 MB flash, 136 kB SRAM, two HS USB ports, Ethernet connectivity, and LCD support. The large 208-pin LQFP package provides extensive I/O access and is appropriate for designs requiring many external peripherals, parallel interfaces, or mixed-signal connections. The LPC1857 family also provides low-power operation and enhanced debug support according to the manufacturer product description. The LPC1857JBD208 is targeted at industrial equipment, networking appliances, human-machine interfaces, data acquisition, communications infrastructure, and embedded control platforms. Its combination of high CPU frequency, substantial memory, and multiple communication interfaces supports protocol processing, user-interface control, data logging, and supervisory control tasks. The LCD controller is useful for local graphical or character-based operator displays. A key design consideration is package and firmware planning. The LQFP-208 footprint requires careful high-density PCB layout, exposed thermal behavior must be evaluated against the operating temperature and CPU workload, and firmware must be validated against the exact LPC1857 peripheral set and errata documentation. USB, Ethernet, LCD, and memory interfaces should be checked against the system signal-integrity requirements before release to production. This page combines the verified NXP product characteristics with distributor pricing references, practical application guidance, and honest replacement limitations. Cross-reference search results identify NXP family options, but they do not establish verified pin-compatible substitutes for this exact 208-pin device; engineers should therefore validate footprint, pinout, memory, peripheral, and firmware compatibility before substitution.

RFQ Contact
LPC1857JBD208E - 180MHz Cortex-M3 1MB MCU | NXP
LPC1857JBD208E

LPC1857JBD208E - 180MHz Cortex-M3 1MB MCU | NXP

The NXP Semiconductors LPC1857JBD208E is a high-performance 32-bit ARM Cortex-M3 microcontroller with a maximum operating frequency of 180 MHz, 1 MB of flash memory, 136 kB of SRAM, and a 208-pin LQFP package measuring 28 mm by 28 mm. The device integrates two high-speed USB interfaces, Ethernet, LCD support, and a broad collection of embedded peripherals for connected industrial, communications, medical, and control systems. An ARM Cortex-M3 microcontroller is a 32-bit embedded processor within the ARM Cortex-M family of real-time microcontroller products. Its three-stage pipeline and integrated system features support deterministic embedded control, while dedicated communication peripherals reduce the need for external controllers. The LPC1857 therefore belongs to the hierarchy microcontroller, embedded processor, semiconductor, and electronic component. Principal features include a 1 MB flash code-storage capacity, 136 kB of SRAM, operation up to 180 MHz, two HS USB interfaces, Ethernet connectivity, and LCD support. The combination of substantial on-chip memory and integrated connectivity allows firmware, graphical interfaces, protocol stacks, and data-processing functions to be consolidated into one device. The 208-pin LQFP package also provides a large pin count for systems requiring numerous I/O, communications, analog, and debug connections. The LPC1857 family uses the ARM Cortex-M3 architecture, which provides a 32-bit processing environment with deterministic interrupt-oriented execution and enhanced debugging support. Its integration of USB, Ethernet, LCD, and extensive GPIO resources makes it more suitable for complex embedded platforms than a basic general-purpose microcontroller. Detailed flash organization, SRAM banking, peripheral pin assignments, electrical limits, and clock-tree values should be confirmed in the manufacturer datasheet for the exact ordering code. Typical applications include industrial Ethernet controllers, USB-connected data acquisition equipment, medical monitoring systems, HMI display controllers, building automation equipment, and network-connected embedded control products. Two USB interfaces permit simultaneous device-role and host/device connectivity, while Ethernet supports networked monitoring and control. The LCD interface is useful in operator panels and local graphical displays. Designers should preserve the exact 208-pin LQFP land pattern, provide the required decoupling and clock circuitry, and validate every signal connected to the numerous peripheral pins. Firmware, peripheral configuration, and board-level timing should be checked against the NXP documentation, especially when using the Ethernet, USB, LCD, or high-speed memory interfaces. This page combines verified source facts with package-aware alternatives and practical engineering guidance.

RFQ Contact
LPC18S30FET256 - 180MHz Cortex-M3 Flashless MCU, 256-LBGA | NXP
LPC18S30FET256

LPC18S30FET256 - 180MHz Cortex-M3 Flashless MCU, 256-LBGA | NXP

The NXP Semiconductors LPC18S30FET256 is a high-performance ARM Cortex-M3 microcontroller running at up to 180 MHz, featuring 200 kB of on-chip SRAM, ROMless boot architecture, hardware security features, Ethernet MAC, two High-Speed USB 2.0 controllers (one Host/Peripheral, one Host-only), an External Memory Controller (EMC), and a 256-pin LBGA package (17x17 mm). It is part of the LPC1800 series, optimized for industrial control, HMI, motor drive, and secure embedded applications where external flash memory is acceptable. A microcontroller (MCU) is an integrated circuit that combines a CPU core, volatile memory (SRAM), non-volatile memory (Flash/ROM or external), and programmable peripherals on a single chip. The Cortex-M3 is an ARM-designed 32-bit RISC core featuring Thumb-2 instruction set, deterministic interrupts, and a Nested Vectored Interrupt Controller (NVIC). LPC1800 MCUs sit in NXP's high-performance general-purpose MCU hierarchy (MCU -> Cortex-M3 -> LPC1800 series -> LPC18Sxx sub-family), providing more compute and peripherals than Cortex-M0/M0+ parts while remaining lower-cost than Cortex-M4 parts. Key features include 200 kB SRAM, 4 kB EEPROM, AES hardware decryption accelerator, two HS-USB ports with on-chip PHY, 10/100 Ethernet MAC with MII/RMII interface, Quad-SPI Flash Interface (SPIFI), EMC supporting SRAM/SDRAM/NOR/NAND, up to 165 GPIO pins, four UARTs, three I2C, two CAN, two SSP/SPI controllers, and a 10-bit ADC with 8 channels. The LBGA256 (17x17 mm) package supports high-density I/O for graphics and external memory expansion. The LPC18S30FET256 uses NXP's standard peripherals library and CMSIS support, enabling rapid firmware development. Its security subsystem (hardware AES + unique device ID + secure boot) makes it suitable for anti-counterfeiting and tamper-resistant designs. The ROMless architecture requires external SPIFI or EMC flash for code storage, giving designers flexibility in memory density and updateability. Typical applications include industrial Human-Machine Interfaces (HMI), motor control and drives, factory automation controllers, secure POS terminals, and embedded networking gateways. When designing with the LPC18S30FET256, ensure proper decoupling (100 nF per VDD pin, 4.7 uF bulk), matched-impedance routing for HS-USB and Ethernet differential pairs, and a 12 MHz external crystal with correct load capacitance. The ROMless boot sequence must be validated using the boot ROM via the ISP/UART or SPIFI interface. Choose LPC18S30FET256E for the industrial-grade variant with extended temperature range. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a single manufacturer page.

RFQ Contact
LPC18S37JBD144E - 180MHz Cortex-M3 MCU | NXP
LPC18S37JBD144E

LPC18S37JBD144E - 180MHz Cortex-M3 MCU | NXP

The NXP Semiconductors LPC18S37JBD144E is a 32-bit ARM Cortex-M3 microcontroller operating at up to 180 MHz, with 1 MB of embedded flash memory, 136 kB of SRAM, and a 144-LQFP package measuring 20 mm by 20 mm. It integrates Ethernet, two high-speed USB interfaces, electromagnetic-missile software support, and an AES engine for connected embedded systems. A microcontroller is a programmable system-on-chip used to execute firmware, coordinate peripherals, and manage digital control or communication tasks. The Cortex-M3 MCU belongs to the ARM Cortex-M family, which combines a compact processor core with deterministic interrupt handling. The LPC18S37JBD144E extends that processor architecture with substantial flash and SRAM, plus dedicated connectivity and hardware-security resources for industrial, networking, and USB-equipped equipment. The device provides 1 MB of flash organized as 1M by 8 bits for firmware and nonvolatile data. Its 136 kB SRAM supports working memory, protocol stacks, Ethernet frames, USB buffers, and application state without requiring external memory in many designs. Two high-speed USB interfaces expand the number of direct host or device connections, while integrated Ethernet supports wired network communication. The AES engine accelerates symmetric encryption operations and reduces the processing burden associated with secure data transfer. The LPC18S37 family also includes EMC-related features intended to improve operation in electrically noisy environments. Together, these resources make the LPC18S37JBD144E suitable for gateways, industrial controllers, USB-to-network equipment, secure embedded controllers, and data-acquisition systems. The 144-LQFP package exposes a large number of digital and communication functions while supporting conventional surface-mount assembly. Its 20 mm by 20 mm body is larger than compact QFN packages but easier to route visually and assemble where fine-pitch access or inspection is important. The E suffix identifies the specified ordering configuration, while the temperature and packaging details should be confirmed against the manufacturer datasheet before production release. PCB design should preserve adequate clearance around all 144 leads, route high-speed USB and Ethernet signals with short return paths, and provide the decoupling and grounding arrangement specified by the manufacturer. Ethernet magnetics, USB connectors, and external transceiver requirements depend on the selected board architecture. Firmware should use the applicable device configuration, clock, pin-muxing, and low-power guidance from the manufacturer datasheet rather than assuming compatibility with another MCU family. This product page organizes the core LPC18S37JBD144E specifications, replacement considerations, package information, and application guidance for faster engineering evaluation. It also identifies the nearest verified same-package NXP option while highlighting where a different peripheral set, memory configuration, or software migration effort must be considered before substitution.

RFQ Contact
LPC18S50FET180E - 180MHz Cortex-M3 MCU | NXP
LPC18S50FET180E

LPC18S50FET180E - 180MHz Cortex-M3 MCU | NXP

NXP Semiconductors LPC18S50FET180E is a 32-bit Arm Cortex-M3 microcontroller with security features, operating at up to 180 MHz and providing 200 kB of SRAM in a 180-TFBGA package measuring 12 x 12 mm. The ROMless design integrates Ethernet, two high-speed USB interfaces, LCD support, and enhanced security capabilities for connected embedded systems. A microcontroller is a programmable semiconductor that combines a processor core, memory, peripherals, and communication interfaces on one device. Within the embedded-control hierarchy, this part belongs to the Arm Cortex-M3 class of 32-bit real-time microcontrollers, combining efficient interrupt handling with integrated connectivity. The ROMless architecture allows the boot program and application firmware to be stored in external nonvolatile memory, supporting larger codebases, flexible field updates, and controlled security provisioning. Key features include an Arm Cortex-M3 processor operating up to 180 MHz, 200 kB of SRAM, Ethernet connectivity, two high-speed USB ports, and LCD controller support. The security-oriented LPC18S family is suited to systems requiring hardware-assisted protection, controlled boot behavior, and connected communications. Its integration can reduce the component count in gateways, industrial controllers, human-machine interfaces, and network-attached equipment. The 180-TFBGA package supports dense PCB layouts while providing direct access to the Ethernet, USB, display, and general-purpose microcontroller peripherals. Because the device is ROMless, firmware storage and the external memory interface form a central part of the hardware design. Designers should use the manufacturer pin-description table when assigning ball locations and should validate signal integrity, power sequencing, exposed-pad treatment, and BGA assembly requirements before release to production. Typical applications include industrial Ethernet gateways, USB-to-Ethernet bridges, human-machine interface controllers, secure embedded network equipment, and connected factory-control systems. The combination of a 180 MHz Cortex-M3 core, 200 kB SRAM, dual high-speed USB, Ethernet, and LCD support allows the device to consolidate protocol processing, user-interface control, and secure connectivity in one compact design. The principal design trade-off is the extra board complexity associated with a 180-ball BGA and external firmware storage. Plan power rails and decoupling for simultaneous Ethernet and USB activity, preserve the recommended ball-pad layout, and qualify the assembly process before volume production. This page organizes the verified device characteristics, sourcing information, practical design considerations, and clearly qualified comparison points for engineering review. For firmware development, confirm the supported external-memory device, boot configuration, pin multiplexing, and peripheral clock settings against the LPC18Sx datasheet. The suffix E identifies the specific ordering configuration, so engineers should preserve the complete MPN when requesting documentation, quotes, or production components.

RFQ Contact
LPC18S57JBD208E - 180MHz Cortex-M3 MCU | NXP | LQFP-208
LPC18S57JBD208E

LPC18S57JBD208E - 180MHz Cortex-M3 MCU | NXP | LQFP-208

The NXP LPC18S57JBD208E is an Arm Cortex-M3 microcontroller that operates at up to 180 MHz and integrates 1 MB of flash memory with 136 kB of SRAM in a 208-pin LQFP package measuring 28 x 28 mm. Designed for connected embedded equipment, the device combines an Ethernet controller, two high-speed USB interfaces, LCD support, electromagnetic-compatibility features, and an AES engine in one microcontroller package. A microcontroller is a programmable control component that integrates a processor core, memory, and peripheral interfaces onto a single semiconductor device. Within the wider embedded-computing hierarchy, the LPC18S57 belongs to the Arm Cortex-M3 MCU class, which is used for real-time control rather than desktop or server processing. Its integrated connectivity and security peripherals reduce the need for separate interface chips while conserving board area in industrial and communications equipment. Three headline capabilities distinguish this device. The 180 MHz Cortex-M3 core provides substantial application-processing headroom, while 1 MB of embedded flash supports larger firmware images and connected-control code. Integrated Ethernet, dual high-speed USB, and LCD connectivity cover several common external interfaces without requiring a companion bus controller. The 208-pin LQFP-208 package exposes a large number of general-purpose I/O lines and dedicated peripheral functions for complex motherboards. The Cortex-M3 processor uses a three-stage pipeline, as described by NXP, and is supported by enhanced debug features and low-power-consumption capabilities. The integrated AES engine supports hardware-assisted encryption, which can reduce the processing burden of security routines compared with a software-only implementation. Ethernet and USB connectivity also allow the controller to participate in network management, industrial gateways, human-machine interfaces, and service equipment. Typical uses include industrial Ethernet controllers, USB-connected test and measurement equipment, LCD-equipped operator panels, building automation nodes, and embedded gateways. The combination of 142 reported I/O lines and a large package makes the part especially useful where several sensors, relays, displays, communications ports, and status indicators must share one controller board. PCB design should treat the 28 x 28 mm LQFP-208 as a high-pin-count design. Use the NXP pin-description table and package drawings to assign every power, ground, clock, debug, and I/O connection, and place decoupling capacitors close to the corresponding supply pins. Confirm board-routing rules, thermal performance, and peripheral pin multiplexing in the manufacturer documentation before committing the layout. This page combines the NXP product information and distributor records with practical design guidance, package details, interface-specific application analysis, and a focused comparison against identified same-package candidates. It highlights where firmware, peripheral, and qualification review remains necessary before any substitution is approved for production hardware.

RFQ Contact
LPC2101FBD48 - 70MHz ARM7 MCU with 8KB Flash | NXP
LPC2101FBD48

LPC2101FBD48 - 70MHz ARM7 MCU with 8KB Flash | NXP

The NXP Semiconductors LPC2101FBD48 is a 16-bit/32-bit ARM7TDMI-S microcontroller operating at up to 70 MHz, with 8 KB of embedded high-speed flash memory, in a 48-LQFP 7 x 7 mm package. It combines a real-time-capable ARM7 processor core with in-system programming, in-application programming, fast GPIO ports, and an integrated 10-bit ADC. A microcontroller is a programmable semiconductor device that combines a CPU core, memory, peripherals, and interface logic on one integrated circuit. The LPC2101 belongs to the LPC2100 family, which is part of the broader hierarchy of embedded processors, microcontrollers, and semiconductor components. It is intended for compact control systems where deterministic peripheral access, low component count, and in-circuit programming are valuable. The principal features of the LPC2101FBD48 include a 70 MHz ARM7TDMI-S core, 8 KB of flash, a 10-bit ADC, fast GPIO ports, and support for ISP and IAP. The 8 KB flash configuration supports compact boot code and embedded control logic without requiring an external program-memory device. Its LQFP-48 package exposes the processor interfaces and peripherals in a conventional surface-mount footprint that is inspectable and compatible with standard PCB assembly methods. The ARM7TDMI-S architecture combines a 32-bit processing path with a 16-bit instruction set optimized for efficient embedded execution. Real-time emulation support helps developers observe and control program execution during debugging. ISP and IAP capability provides practical options for programming a connected board, while the integrated ADC allows analog measurements to be handled without a separate converter when the application’s input range and accuracy meet its requirements. Typical uses include industrial control modules, sensor interfaces, compact instrumentation, communication equipment, and embedded control subsystems. The combination of local flash, GPIO, ADC capability, and an ARM-compatible development environment makes the device useful where a small firmware image and moderate processing throughput are sufficient. Designers should size firmware and RAM carefully because this member provides 8 KB of flash, substantially less program storage than higher-capacity members of the LPC2100 family. PCB implementation requires attention to the 48-LQFP pin arrangement, exposed supply and ground connections, clock stability, and analog-input conditioning. The ADC should be connected only to signals within its input range, and grounding and decoupling should follow the pin-description and recommended-layout guidance in the manufacturer datasheet. Firmware development must also confirm that the toolchain and application requirements remain appropriate for the ARM7TDMI-S architecture. This product overview organizes the LPC2101FBD48’s core, memory, package, and peripheral characteristics into an engineering-focused reference. It also identifies same-package family options, outlines replacement constraints, and highlights the practical considerations for firmware sizing, ADC use, programming, and PCB implementation.

RFQ Contact
LPC2102FBD48 - 70MHz ARM7 Microcontroller 16KB Flash | NXP
LPC2102FBD48

LPC2102FBD48 - 70MHz ARM7 Microcontroller 16KB Flash | NXP

The NXP Semiconductors LPC2102FBD48 is a 16-bit/32-bit ARM7TDMI-S microcontroller with a 70 MHz operating frequency, 16 KB of embedded high-speed flash memory, and a 48-LQFP package measuring 7 mm by 7 mm. The device also includes a 10-bit ADC and supports in-system programming and in-application programming for flexible field configuration and firmware maintenance. An ARM7TDMI-S microcontroller is a 32-bit RISC processor core commonly used in embedded control systems. The LPC2100 series combines that core with fast GPIO ports, embedded flash, serial interfaces, analog conversion, and real-time emulation. In the hierarchy of electronic components, this device belongs to the microcontroller family, within embedded processors and semiconductor ICs. Its 128-bit memory interface and accelerator architecture support efficient 32-bit instruction execution at the maximum clock rate. Key features include 70 MHz CPU operation, 16 KB of on-chip flash, a 10-bit ADC, in-system programming, in-application programming, and real-time emulation support. The 48-LQFP package provides a conventional leaded footprint that is practical for prototype boards, industrial controllers, and legacy equipment. The operating supply information identifies the device as supporting 1.8 V and 3.3 V operation. The LPC2102 position within the LPC2101, LPC2102, and LPC2103 family is defined by its embedded flash capacity. The family shares the ARM7TDMI-S core and real-time emulation architecture while offering 8 KB, 16 KB, or 32 KB flash configurations. The LPC2103 member also benefits from the 128-bit memory interface and accelerator architecture described for the family, which are valuable for interrupt service routines and DSP-oriented code. Typical applications include industrial control modules, data acquisition equipment, building controls, embedded instrumentation, communications interfaces, and legacy peripheral controllers. The 10-bit ADC supports analog monitoring functions, while the fast GPIO ports suit high-speed digital control and interface tasks. ISP and IAP support also make the device useful where field updates or configuration storage are required. When designing a board around the LPC2102FBD48, follow the manufacturer pin-description table for signal assignment and verify the external crystal, reset, and decoupling requirements. Use the NXP datasheet as the authority for peripheral multiplexing, electrical limits, and programming procedures. Confirm legacy software support before committing the MCU to a new production design, because ARM7TDMI-S tools and libraries differ from modern Cortex-M ecosystems.

RFQ Contact
LPC2102FHN48 - 70MHz ARM7 MCU with 16KB Flash | NXP
LPC2102FHN48

LPC2102FHN48 - 70MHz ARM7 MCU with 16KB Flash | NXP

NXP LPC2102FHN48 is a 32-bit ARM7TDMI-S microcontroller operating up to 70 MHz, with 16 KB of embedded flash and 4 KB of SRAM in a 48-HVQFN 7 x 7 mm package. It combines an ARM7TDMI-S core, fast GPIO, ISP/IAP programming support, and a 10-bit ADC in one compact embedded-control device. An ARM7-based microcontroller is a compact computing platform that combines a 32-bit reduced-instruction-set CPU core with embedded memory, interrupt control, and peripherals. The LPC2102 belongs to the NXP LPC2100 family and sits within the hierarchy of 32-bit MCU, embedded processor, and programmable control IC. Its ARM7TDMI-S architecture supports 32-bit code execution while retaining a relatively simple embedded peripheral structure. The principal device characteristics include a maximum clock frequency of 70 MHz, 16 KB of flash for program storage, 4 KB of SRAM for working data, and a 10-bit ADC. In-System Programming and In-Application Programming support permit firmware download and field-update workflows, while 32 general-purpose I/O lines provide connections for sensors, actuators, communications, and control signals. Technically, the LPC2102 combines a 128-bit memory interface and accelerator architecture designed to support efficient 32-bit instruction execution at the maximum operating frequency. The integrated ADC and fast GPIO reduce the need for external conversion and interface components in compact control systems. The 48-HVQFN package also offers a small PCB footprint, although its exposed-pad layout requires careful thermal and assembly planning. Typical applications include industrial control, sensor acquisition, motor and actuator control, serial-interface equipment, and embedded data-acquisition systems. The 70 MHz ARM7 core is useful when firmware requires more processing capability than a basic 8-bit controller, while the 10-bit ADC supports analog measurement and threshold-control functions. When designing a PCB, reserve the exposed thermal pad according to the NXP package drawing and provide continuous ground-plane connectivity. Confirm crystal, reset, and decoupling requirements from the manufacturer datasheet. Production firmware should also account for the limited 16 KB flash and 4 KB SRAM budgets before enabling additional peripherals or buffering schemes. This product page consolidates the manufacturer specifications, package information, sourcing details, and engineering-oriented selection guidance. It also distinguishes the LPC2102 from adjacent LPC2100-family devices so designers can evaluate flash capacity, pin compatibility, and firmware impact before approving a replacement or second source.

RFQ Contact
LPC2103FBD48 - 70MHz ARM7 MCU, 32KB Flash | NXP
LPC2103FBD48

LPC2103FBD48 - 70MHz ARM7 MCU, 32KB Flash | NXP

NXP Semiconductors LPC2103FBD48 is a 32-bit ARM7TDMI-S microcontroller operating up to 70 MHz, with 32 KB of embedded high-speed flash memory and 8 KB of SRAM in a 48-LQFP 7 x 7 mm package. The device also integrates a 10-bit ADC, in-system programming support, and in-application programming capability for embedded control designs requiring a compact microcontroller with broad peripheral connectivity. An ARM7TDMI-S microcontroller combines a 16/32-bit ARM processor core, memory, and peripherals on one integrated circuit. It belongs to the embedded microcontroller hierarchy alongside 8-bit and 32-bit MCU families, but provides substantially greater arithmetic and addressing capability than an 8-bit device. The LPC2103FBD48 is positioned for industrial embedded systems, communication equipment, data acquisition, and general-purpose real-time control where integrated flash and mixed-signal measurement simplify the hardware design. The LPC2103FBD48 combines a maximum CPU frequency of 70 MHz with 32 KB of embedded high-speed flash for firmware and 8 KB of SRAM for working data. Its 10-bit ADC supports analog measurement directly in the same package, reducing the need for external converters in sensor and process-control applications. ISP and IAP support provide practical paths for initial programming and subsequent firmware updates, which are important for field-configurable or remotely maintained equipment. The ARM7TDMI-S architecture uses a 32-bit processor organization and supports the performance expected from embedded networking, control, and instrumentation applications. At 70 MHz, it provides substantially more instruction throughput than typical 8-bit microcontrollers, while its compact integrated memory and analog conversion resources keep the external component count controlled. The exact bus, peripheral, clock, and electrical limits should be confirmed in the NXP datasheet and LPC2101/02/03 user manual before final design release. Typical uses include industrial sensor interfaces, serial communication equipment, motor and process controllers, data loggers, and compact embedded control systems. The integrated ADC is useful for reading analog transducers, while the available GPIO and serial interfaces support sensors, actuators, human-interface circuitry, and communications links. Firmware should use the documented startup sequence, clock configuration, peripheral pin multiplexing, and memory map rather than assuming compatibility with unrelated ARM microcontrollers. PCB design should preserve the 48-LQFP land pattern, provide clean supply decoupling at the appropriate pins, route high-speed clock and debug signals away from sensitive analog inputs, and follow the NXP recommended external-component arrangement. Confirm programming access, oscillator options, reset behavior, unused-pin treatment, and exposed thermal requirements from the pin-description table and application information in the manufacturer documentation. This page combines the core LPC2103FBD48 characteristics with package, application, sourcing, and replacement guidance. It also distinguishes true pin-compatible substitutes from packaging-code variants, helping engineers identify the appropriate path for production sourcing, legacy maintenance, or a deliberate redesign.

RFQ Contact
LPC2103FBD48EL - 70MHz ARM7 Microcontroller | NXP
LPC2103FBD48EL

LPC2103FBD48EL - 70MHz ARM7 Microcontroller | NXP

The NXP Semiconductors LPC2103FBD48EL is a single-chip 16-bit/32-bit ARM7TDMI-S microcontroller with a maximum clock rate of 70 MHz, 32 KB of embedded flash memory, 8 KB of RAM, and a 10-bit SAR ADC. The device is packaged in a 48-LQFP measuring 7 x 7 mm and is intended for embedded control, communications, instrumentation, and real-time processing systems. An ARM-based microcontroller is a programmable semiconductor that combines a processor core, memory, peripherals, and interface logic on one integrated circuit. The LPC2103 belongs to the microcontroller hierarchy of embedded processors and semiconductor devices. Its ARM7TDMI-S core supports 32-bit code execution, while the integrated flash, RAM, ADC, serial interfaces, and general-purpose I/O provide a compact platform for controlling external circuitry without a separate external memory system. The principal device characteristics include 32 KB of high-speed program flash, 8 KB of on-chip RAM, a 10-bit successive-approximation ADC, and operation from a 1.65 V to 1.95 V core supply. A 128-bit-wide memory interface and accelerator architecture support efficient 32-bit execution. The NXP LPC2100 family also provides ISP/IAP capability, helping support programming and firmware-update workflows. The LPC2103FBD48EL combines the ARM7TDMI-S processor with dedicated embedded peripherals and fast parallel ports. Its architecture is suitable for interrupt-driven control, communications, data acquisition, and DSP-oriented algorithms where deterministic execution is important. The 48-LQFP package exposes the processor bus, I/O ports, analog inputs, serial interfaces, timing functions, and power connections on a compact surface-mount footprint. Typical applications include industrial monitoring equipment, communications controllers, embedded data-loggers, motor and process control, sensor acquisition systems, and compact consumer or appliance controllers. The 10-bit ADC is useful for reading analog sensors, while the general-purpose ports support digital control and interface signaling. Its 70 MHz operating capability also allows more computation to be handled locally than in many simpler 8-bit or low-clock-rate control devices. Designers should account for the low 1.65 V to 1.95 V supply requirement when selecting regulators, decoupling components, and external interface levels. The 48-LQFP footprint also requires careful examination of pin multiplexing, power routing, and exposed thermal behavior. Programming should follow NXP's documented ISP/IAP and device-configuration procedures rather than assuming a generic ARM debug arrangement.

RFQ Contact
LPC2103FHN48 - 32KB Flash ARM7 Microcontroller | NXP
LPC2103FHN48

LPC2103FHN48 - 32KB Flash ARM7 Microcontroller | NXP

The NXP Semiconductors LPC2103FHN48 is a single-chip 16-bit/32-bit ARM7TDMI-S microcontroller with 32 kB of embedded high-speed flash memory, 8 kB of RAM, fast GPIO ports, and a 10-bit ADC. It is packaged in a 48-pin LQFP package measuring 7 mm by 7 mm. The device also includes ISP/IAP capability and supports real-time emulation, making it suitable for embedded control systems that require deterministic peripheral access and in-system programming. An ARM7TDMI-S microcontroller combines a 32-bit ARM processor core, memory interfaces, interrupt control, and embedded peripherals in a single integrated circuit. Within the semiconductor hierarchy, the LPC2103FHN48 belongs to the microcontroller family of embedded processors, alongside the broader category of integrated circuits. Its combination of embedded flash, SRAM, serial interfaces, timers, and analog conversion supports compact control designs without requiring a separate external memory for program storage. The key device attributes include an ARM7TDMI-S CPU operating up to 70 MHz, 32 kB of flash, 8 kB of RAM, an 8-channel 10-bit ADC, fast ports, and ISP/IAP support. The 128-bit memory interface and accelerator architecture associated with the LPC2101/02/03 family are intended to improve execution speed, particularly in interrupt routines and DSP-oriented code. The NXP product page identifies the device as archived historical content, so procurement should account for its legacy lifecycle position. Typical uses include industrial equipment, data acquisition modules, embedded instrumentation, communication controllers, and compact consumer or appliance control boards. The 10-bit ADC supports analog monitoring, while fast GPIO ports suit digital control interfaces and status signaling. ISP/IAP can simplify firmware updates in deployed equipment when the board exposes the required programming signals. Designers should use the LPC2103 datasheet pin-description and connection tables when assigning the 48 LQFP pins. Power, decoupling, clock, reset, and programming interfaces should follow the manufacturer’s reference guidance. Firmware replacement must also account for the legacy Arm7TDMI-S toolchain and memory map rather than assuming compatibility with newer Cortex-M devices. This product record combines manufacturer product information, distributor listing details, archived lifecycle context, and engineering guidance for legacy embedded-system maintenance. It distinguishes genuine package-compatible alternatives from cross-family devices that require board changes, and it highlights the importance of validating flash size, RAM, clocking, ADC functions, and firmware tool support before replacement.

RFQ Contact
LPC2104BBD48 - 32-bit ARM7 MCU 128kB Flash LQFP-48 | NXP
LPC2104BBD48

LPC2104BBD48 - 32-bit ARM7 MCU 128kB Flash LQFP-48 | NXP

The NXP Semiconductors LPC2104BBD48 is a single-chip 32-bit ARM7TDMI-S microcontroller with 128 kB of embedded high-speed flash memory, 16 kB of SRAM, real-time emulation, and embedded Trace support, supplied in a 48-lead LQFP package (SOT313-2, 7 mm x 7 mm x 1.4 mm body, 0.5 mm pitch). It operates at up to 60 MHz from a 1.65 V to 1.95 V core supply and provides 32 GPIO pins for general-purpose use. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (typically flash), data memory (RAM), and a rich set of peripherals on a single die. The LPC2104 sits inside the broader hierarchy of: microcontroller -> embedded microprocessor -> integrated circuit -> semiconductor. Its ARM7TDMI-S core is a 16/32-bit RISC processor from the ARM7 family, historically one of the most widely deployed 32-bit MCU cores in industrial, automotive, and consumer embedded designs. Key features of the LPC2104BBD48 include 128 kB of on-chip ISP/IAP flash, 16 kB of SRAM, two 32-bit timers, a 10-bit ADC, I2C, SPI, and UART serial interfaces, plus a Real-Time Clock (RTC) with battery backup support. The device also integrates a Vectored Interrupt Controller (VIC) for fast deterministic interrupt response, and offers JTAG and EmbeddedICE for in-system debug. The LPC2104 uses a 128-bit wide internal flash bus to deliver sustained instruction throughput from flash despite the 0-wait-state architecture, and supports a 16-bit Thumb instruction set to improve code density. Power management includes two low-power modes (idle and power-down), an external interrupt wake-up path, and a brown-out detector to protect flash integrity. Typical applications include industrial control nodes, embedded sensor hubs, low-power handheld terminals, RS-485/Modbus gateway controllers, and legacy ARM7 retrofits. The combination of small LQFP-48 footprint, ample flash, and proven ARM7 toolchain makes it well-suited to brownfield designs where ARM Cortex migration is not yet required. When designing with the LPC2104, plan the crystal/oscillator layout per the datasheet because the internal PLL is sensitive to noise on VREF/VSSA; place 100 nF and 10 uF decoupling capacitors close to each supply pin. Note that this part is reported as obsolete/EOL on at least one distributor source, so plan second-source or migration path early. This page synthesises drop-in alternatives (same-brand first), 60 MHz ARM7 design considerations, and a comparison matrix that includes package/flash/RAM dimensions not aggregated on typical distributor listings.

RFQ Contact
LPC2106BBD48 - 60MHz ARM7 MCU, 128KB Flash | NXP | Industrial
LPC2106BBD48

LPC2106BBD48 - 60MHz ARM7 MCU, 128KB Flash | NXP | Industrial

NXP Semiconductors LPC2106BBD48 is a single-chip 32-bit ARM7TDMI-S microcontroller with a 60 MHz clock, 128 KB of embedded high-speed flash memory, and up to 64 KB of SRAM. The device is packaged in a 48-lead LQFP measuring 7 mm × 7 mm with a 0.5 mm lead pitch. Its combination of embedded flash, real-time emulation, embedded trace support, and a compact 48-pin package makes it suitable for real-time control, communications, and industrial embedded systems. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and I/O into one device. The LPC2106 belongs to the 32-bit microcontroller hierarchy and uses the ARM7TDMI-S architecture. Within that architecture, the processor can execute 32-bit ARM instructions efficiently while also supporting 16-bit Thumb code, allowing compact routines where code density matters. The integrated flash supports self-programming and in-application programming workflows used for firmware updates and configuration storage. Principal features include a 60 MHz ARM7TDMI-S core, 128 KB flash, and SRAM options of 16 KB, 32 KB, or 64 KB depending on the device variant. The LPC2106 family provides dedicated serial interfaces for UART, SPI, and I2C, along with multiple timer and counter blocks for periodic generation, capture, and motor-control functions. Its 48-lead LQFP exposes the required digital interfaces and external memory or peripheral signals while remaining compatible with conventional surface-mount assembly processes. The CPU uses a Harvard-style architecture with a 128-bit-wide memory interface that supports efficient instruction execution at the maximum clock rate. Real-time emulation and embedded trace features assist development and diagnostics, while the peripheral set reduces the need for external interface devices in typical control systems. Because clock-dependent timing, power consumption, and electrical characteristics are not fully stated on the product page, designers should use the manufacturer datasheet for final timing, voltage, and peripheral-limit decisions. Typical uses include industrial control panels, data acquisition equipment, communications modules, embedded gateways, and compact automation controllers. The 128 KB flash capacity is useful for moderate protocol stacks and application firmware, while the ARM7 16/32-bit instruction set is appropriate for real-time supervisory and peripheral-control tasks. Designers upgrading older ARM7 systems should also account for differences in peripheral behavior, development tools, and software-support policy rather than assuming that every register or application is unchanged. A critical design consideration is PCB allocation around the 0.5 mm-pitch leads. Follow the manufacturer pin table and land pattern exactly, inspect every exposed power and ground connection, and provide the required bypass capacitors close to the device. For clock-sensitive or communication-heavy equipment, validate signal integrity, startup behavior, and firmware timing at the intended 60 MHz operating condition before production release. This product page consolidates the core package, memory, processor, and sourcing details into an engineering-oriented reference. It also organizes design guidance, selection criteria, and package-compatible alternatives to support initial design decisions, footprint review, and legacy-platform maintenance without replacing the manufacturer datasheet.

RFQ Contact
LPC2106FBD48 - 60MHz ARM7 MCU, 128KB Flash | NXP
LPC2106FBD48

LPC2106FBD48 - 60MHz ARM7 MCU, 128KB Flash | NXP

The NXP Semiconductors LPC2106FBD48 is a 32-bit ARM7TDMI-S microcontroller with a 60 MHz clock, 128 kB of embedded high-speed flash memory, and 64 kB of SRAM, housed in a 48-pin LQFP package. It combines deterministic 32-bit processing with embedded serial interfaces, general-purpose I/O, and in-system programming support for embedded control systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The LPC2106 belongs to the 32-bit embedded-controller hierarchy, where an ARM7TDMI-S core executes firmware and communicates with sensors, actuators, communications circuits, and human-interface electronics. Its LQFP-48 package provides 32 general-purpose I/O pins and a practical platform for compact control boards. The device supports 128 kB of high-speed flash for program storage and includes 64 kB of SRAM for working memory. Its serial interface set includes two UARTs, I2C, and SPI, enabling communication with external transceivers, sensors, memory devices, and host systems. The integrated PWM unit supports motor, lighting, and power-control functions, while Boundary Scan assists board-level testing. The ARM7TDMI-S architecture provides a 32-bit RISC instruction set and real-time emulation and embedded trace support. This combination is useful when deterministic control and development visibility are required without the complexity of a higher-performance processor. The 60 MHz operating speed provides additional computation margin for protocol handling, sampling, state management, and supervisory control tasks. Typical uses include industrial equipment interfaces, serial protocol converters, building-control nodes, instrumentation, communication modules, and compact embedded controllers. Two UARTs allow simultaneous host and field-device connections, while I2C and SPI support sensors and external peripherals. The PWM output can reduce the component count in motor-drive, dimming, or proportional-control subsystems. Designers should preserve the ARM7 memory map, interrupt-vector behavior, and peripheral register compatibility when reusing existing LPC2106 firmware. Power, decoupling, clock, and programming-circuit decisions should follow the NXP LPC2104/2105/2106 datasheet. Boundary Scan availability also makes test access useful, but the exposed footprint must match the 48-pin LQFP layout. This product summary consolidates the core CPU, memory, interface, package, and sourcing details for engineers evaluating the LPC2106FBD48. It also organizes drop-in family options, design guidance, and application positioning to support faster component selection and PCB planning.

RFQ Contact