Products (44,000+)

LPC4367JET100E - 204MHz Dual-Core Cortex-M4/M0 MCU, 1MB Flash | NXP
LPC4367JET100E

LPC4367JET100E - 204MHz Dual-Core Cortex-M4/M0 MCU, 1MB Flash | NXP

The NXP Semiconductors LPC4367JET100E is a high-performance 32-bit dual-core microcontroller built on Arm Cortex-M4/M0, operating up to 204 MHz with 1 MB (1M x 8) on-chip flash and 154 kB of on-chip SRAM in a 100-ball TFBGA (9x9 mm) package. It integrates Ethernet, two high-speed USB ports, an LCD controller and EMC peripherals. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory and peripherals onto one die. The LPC43xx family belongs to the embedded microcontroller segment of integrated circuits, sitting between simple 8/16-bit controllers and higher-end application processors. Its Arm Cortex-M4 core carries the main application workload while an Arm Cortex-M0 subsystem handles peripheral management, and the M0 coprocessor is explicitly designed as a replacement for existing 8/16-bit microcontrollers with up to 204 MHz performance and a reduced code size. Key features of the LPC4367JET100E include dual-core operation at 204 MHz, 1 MB of flash for firmware and data, 154 kB of SRAM for working buffers, and 16 kB of on-chip EEPROM for parameter storage. The Cortex-M0 hardware multiply is implemented as a 32-cycle iterative multiplier, which keeps coprocessor execution deterministic. Two independent high-speed USB interfaces allow simultaneous host/device or dual-device connectivity, and the integrated Ethernet MAC supports networked industrial and communications equipment. Internally, the device combines an Arm Cortex-M4 processor with an Arm Cortex-M0 subsystem for managing peripherals, plus a separate Cortex-M0 coprocessor. Memories and peripherals sit behind an efficient bus matrix, and the LCD controller and EMC peripherals support display-driven human-interface designs. The LPC436x family targets embedded applications that need connectivity plus real-time control. Typical applications include industrial Ethernet gateways, USB-to-Ethernet bridges, PLC and data-acquisition controllers, human-machine interface panels with integrated LCD, and connected sensor or building-automation nodes. Because the MCU integrates USB, Ethernet and LCD control in one package, many designs replace a multi-chip processor-plus-interface solution. When designing with the LPC4367JET100E, plan power and decoupling carefully around the 204 MHz core, keep high-speed USB and Ethernet traces short and reference-controlled, and leave the BGA escape routing dense enough for clean layer changes. A 100-ball TFBGA also demands a careful ball-map review and adequate thermal vias under the die. This page assembles the NXP product information, distributor availability listings and the LPC436x family datasheet into one engineering reference, adding drop-in alternatives, parameter-by-parameter comparison and practical design notes that go beyond the manufacturer overview.

RFQ Contact
LPC4367JET256E - 204MHz Dual-Core MCU | NXP | 256-LBGA
LPC4367JET256E

LPC4367JET256E - 204MHz Dual-Core MCU | NXP | 256-LBGA

NXP LPC4367JET256E is a 32-bit dual-core microcontroller built around Arm Cortex-M4/M0 processor cores, operating up to 204 MHz, with 1 MB of embedded flash, 154 kB of SRAM, and 16 kB of EEPROM in a 256-LBGA package measuring 17 x 17 mm. It integrates Ethernet, two high-speed USB interfaces, and LCD support for connected embedded systems. A microcontroller is a programmable semiconductor that combines a processor core, nonvolatile program memory, working memory, and peripherals in one package. The LPC4367JET256E belongs to the Arm Cortex-M family and provides a higher-performance M4 core alongside an M0 subsystem for managing peripherals. Its integration supports connected industrial equipment, human-machine interfaces, data acquisition systems, and embedded network controllers without requiring separate devices for several common communication functions. The headline configuration combines 204 MHz maximum processing speed, 1 MB of flash, and 154 kB of SRAM. Its dual-core architecture can divide real-time peripheral-control work from higher-level application processing. The integrated Ethernet interface supports networked equipment, while two high-speed USB interfaces support direct connectivity, configuration, or peripheral expansion. The LCD interface is useful for control panels and local graphical status displays. NXP describes the LPC4367JET256E as a high-performance 32-bit MCU based on Arm Cortex-M4/M0. The 256-ball BGA package provides 256 physical contacts and supports the dense integration required by the Ethernet, USB, LCD, memory, and general-purpose I/O resources. The verified product information also identifies EMC support as part of the device capability set. Exact pin functions, complete electrical limits, and detailed timing parameters must be confirmed against the official NXP datasheet before schematic capture or PCB layout. Typical uses include industrial Ethernet controllers, USB-equipped data acquisition units, programmable logic and test equipment, LCD-based operator interfaces, and embedded gateways. The M4/M0 combination is particularly useful when deterministic peripheral management must coexist with more demanding protocol processing or application logic. PCB design should preserve the LBGA escape-routing channels, provide suitable power and decoupling networks, and follow NXP layout guidance. Because this package has a high ball count and fine pitch, assembly capability, via-in-pad requirements, thermal-via density, and solder-mask design should be reviewed with the board fabricator before release. This page consolidates the verified manufacturer and distributor information for the LPC4367JET256E, including its core architecture, memory configuration, package, connectivity, price reference, and traceable source links. It also separates verified facts from unavailable electrical details and highlights where an engineer must consult the official NXP datasheet before making a drop-in or layout decision.

RFQ Contact
LPC4370FET100E - Cortex-M4/M0 MCU with Ethernet | NXP
LPC4370FET100E

LPC4370FET100E - Cortex-M4/M0 MCU with Ethernet | NXP

NXP Semiconductors LPC4370FET100E is a 32-bit, flashless embedded microcontroller combining one Arm Cortex-M4 core with two Cortex-M0 cores, providing 282 kB of SRAM in a TFBGA-100 package. The device also integrates Ethernet, two high-speed USB controllers, and a 12-bit ADC capable of 80 Msps. These resources make the LPC4370FET100E suitable for connected industrial equipment, data acquisition systems, and embedded network controllers requiring substantial RAM and extensive peripheral connectivity. A microcontroller is a programmable semiconductor that combines a processor core, memory interfaces, communication peripherals, timers, and analog or digital I/O on one integrated circuit. The LPC4370 architecture extends the Cortex-M4 concept with a dedicated Cortex-M0 coprocessor and a separate Cortex-M0 peripheral-management subsystem. Within the embedded-controller hierarchy, this arrangement combines application-processing capability with hardware that can offload communication, control, or peripheral tasks while reducing main-core interrupt overhead. The principal features include 282 kB of SRAM, a flashless architecture for external program-memory support, two high-speed USB interfaces, Ethernet connectivity, and an 80 Msps 12-bit ADC. The 204 MHz Cortex-M4 processing capability supports demanding control loops, protocol processing, and real-time embedded workloads. Configurable peripherals such as the State Configurable Timer and Serial General Purpose I/O interface allow timing and signal-routing functions to be adapted to application-specific requirements. The mixed-core design allows the Cortex-M4 processor to execute the main application while the Cortex-M0 subsystem handles peripheral management and the additional Cortex-M0 core can support a coprocessor workload. This division can improve deterministic response and isolate timing-sensitive activity from the primary application. The flashless configuration is important for systems that use external QSPI flash, code-execution security mechanisms, or a boot architecture requiring the MCU to operate as the system controller without embedded program memory. Typical applications include industrial Ethernet bridges, high-speed data loggers, USB-to-Ethernet gateways, programmable logic controllers, motor-control equipment, and instrumentation with high-speed analog sampling. Ethernet and dual high-speed USB make the device especially relevant to gateways that must bridge industrial networks and service interfaces. Its 282 kB SRAM also benefits data-intensive control systems that require buffering without immediately transferring every sample to external storage. PCB design should preserve clean power distribution and controlled impedance for Ethernet and high-speed USB. Place bypass capacitors close to supply pins, route sensitive analog inputs away from digital switching nodes, and follow the manufacturer’s recommended TFBGA-100 land pattern and via configuration. Because this is a flashless MCU, the external memory interface and boot configuration also require careful planning to prevent bus contention and timing problems during startup. This page combines the manufacturer product information, memory and connectivity characteristics, application guidance, comparison parameters, and practical PCB considerations into a focused engineering reference. It also identifies the limits of current cross-reference information so designers can distinguish a confirmed package match from a device that still requires firmware, boot, and electrical verification.

RFQ Contact
LPC4370FET100K - 204MHz Tri-Core MCU | NXP | Industrial
LPC4370FET100K

LPC4370FET100K - 204MHz Tri-Core MCU | NXP | Industrial

The NXP Semiconductors LPC4370FET100K is a 32-bit Arm Cortex-M4 and two Cortex-M0 microcontroller with a 204 MHz primary core, 282 kB of SRAM, and a 100-TFBGA 9 x 9 mm package. The flashless device integrates Ethernet, two high-speed USB controllers, and an 80 Msps 12-bit ADC for connected embedded systems. A microcontroller is a programmable system-on-chip containing a processor core, memory, peripherals, and interface controllers on one package. The LPC4370 belongs to the 32-bit embedded MCU hierarchy and combines a Cortex-M4 application core with two Cortex-M0 cores for peripheral management and real-time control. Its mixed-core architecture can offload time-critical tasks while the primary core handles application logic and high-bandwidth communications. The LPC4370FET100K provides 204 MHz processing performance, 282 kB of SRAM, Ethernet, two high-speed USB ports, and an 80 Msps 12-bit ADC. The 12-bit converter combines sampling speed with sufficient resolution for many industrial monitoring, sensor acquisition, and control tasks. Its extensive serial, communications, timing, and configurable peripheral resources support data acquisition, communications equipment, industrial controllers, and connected embedded products. The Cortex-M4 core uses a three-stage pipeline, Harvard architecture, separate instruction and data buses, and a peripheral bus. This organization supports efficient concurrent access to code, data, and peripherals. The two Cortex-M0 resources are useful for managing peripherals or executing deterministic control functions without loading the main application core. The exact internal flash, memory, and peripheral configuration should be confirmed in the manufacturer LPC4370 product data sheet before firmware and board design begin. Typical applications include Ethernet-connected industrial controllers, high-speed USB data-acquisition equipment, environmental monitoring systems, factory automation nodes, and embedded gateways. Ethernet and dual high-speed USB support provide multiple paths for host connectivity, diagnostics, firmware update, and external storage or sensor interfaces. The 80 Msps ADC also makes the device suitable for rapid analog signal acquisition when paired with suitable front-end circuitry. PCB implementation requires careful attention to the 100-TFBGA footprint, high-speed USB routing, Ethernet impedance control, analog-input conditioning, and exposed-pad thermal management. Place decoupling capacitors close to their associated supply pins, use short return paths for high-speed signals, and follow the manufacturer package and layout guidance. Confirm all pin assignments and board dimensions against the LPC4370 product data sheet. This page combines the manufacturer product information with engineering-oriented application guidance, package considerations, a structured comparison against identified NXP family alternatives, and practical design notes. It helps engineers evaluate whether the LPC4370FET100K provides the required processing, connectivity, conversion performance, and package density for a specific embedded design.

RFQ Contact
LPC4370FET256E - Tri-Core 204MHz MCU with 282kB SRAM | NXP
LPC4370FET256E

LPC4370FET256E - Tri-Core 204MHz MCU with 282kB SRAM | NXP

The NXP Semiconductors LPC4370FET256E is a 32-bit tri-core Arm Cortex-M4 and Cortex-M0 microcontroller with a 204 MHz maximum CPU frequency, 282 kB of SRAM, and a 256-LBGA package measuring 17 x 17 mm. It is ROMless and operates from a 3.3 V supply according to the verified product listings. The LPC4370 combines one Cortex-M4 core with two Cortex-M0 cores, allowing control-intensive and communication-related tasks to be distributed across the processing architecture. A microcontroller is a programmable system-on-chip that integrates a processor core, memory interfaces, peripherals, and communication controllers onto one package. The LPC4370 belongs to the Arm Cortex-M4 microcontroller family and extends the platform with two Cortex-M0 subsystems for peripheral management. This hierarchy places it within embedded processors, where deterministic control, connectivity, and configurable peripherals are combined in a single device. Verified feature data identifies 282 kB of SRAM, Ethernet connectivity, two high-speed USB controllers, an 80 Msps 12-bit ADC, LCD support, configurable timers, and serial GPIO. The three-core arrangement can separate real-time I/O or protocol handling from higher-level application processing. Its 204 MHz Cortex-M4 core provides substantial computation for communications gateways, industrial controllers, and connected embedded equipment. The LPC4370 uses advanced configurable peripherals such as the State Configurable Timer and Serial General Purpose I/O interface. These resources can be adapted to application-specific timing, trigger, routing, or communication requirements rather than relying only on fixed peripheral functions. The two high-speed USB controllers, Ethernet interface, and 12-bit ADC also reduce the need for external interface devices when the board design requires several data acquisition and communications paths. Typical applications include industrial automation, Ethernet-connected control systems, high-speed data acquisition, human-machine interfaces with LCD support, and embedded gateways. The 256-LBGA package exposes a large number of I/O and peripheral resources, but its fine-pitch construction requires careful PCB layout, inspection, and assembly capability. Designers should confirm external memory configuration, pin multiplexing, power integrity, differential-signal routing, and thermal performance against the manufacturer datasheet. Because this part is ROMless, a boot strategy and external nonvolatile storage must be planned at the system level. Software compatibility, peripheral errata, and toolchain support should also be checked before production release. This page combines verified manufacturer and distributor information with package, sourcing, comparison, and design considerations. It identifies where the LPC4370FET256E fits and explicitly marks specifications that require confirmation rather than presenting unsupported values as facts.

RFQ Contact
LPC43S20FET180E - 204MHz Dual-Core MCU | NXP | Embedded
LPC43S20FET180E

LPC43S20FET180E - 204MHz Dual-Core MCU | NXP | Embedded

NXP LPC43S20FET180E is a 32-bit dual-core Arm microcontroller for embedded applications, combining an Arm Cortex-M4 processor, an Arm Cortex-M0 coprocessor, 200 kB of SRAM, and a maximum operating frequency of 204 MHz in a 180-ball TFBGA package measuring 12 x 12 mm. The ROMless design requires external nonvolatile memory for program storage. A microcontroller is a programmable semiconductor that integrates a processor core, memory interfaces, communication peripherals, timers, and digital I/O into one device. The LPC43S20 belongs to the microcontroller, embedded processor, and semiconductor hierarchy. Its asymmetric dual-core architecture can divide work between the Cortex-M4 and Cortex-M0 cores, making it useful where control-loop performance and lower-power background processing must coexist in a compact embedded platform. Key features include an AES engine for hardware-assisted security, a high-speed USB controller, an external memory controller, configurable SCTimer/PWM resources, and the SGPIO interface. The device also includes connectivity described as CANbus, EBI/EMI, I2C, SD, SPI, UART/USART, and USB OTG. These interfaces support industrial control, communications equipment, data acquisition, and USB-connected embedded products without requiring a separate collection of peripheral devices. The Cortex-M4 core provides the primary high-performance processing path, while the Cortex-M0 coprocessor supports additional control tasks. The 204 MHz clock rating allows computationally intensive routines to execute at a substantially higher clock rate than typical low-power microcontroller cores. The 200 kB SRAM provides internal working memory, while the external memory interface allows designs to use external storage when boot code, firmware images, trace data, or working sets exceed internal SRAM capacity. Typical uses include industrial automation controllers, USB data-acquisition equipment, motor and motion-control systems, communication gateways, and embedded security appliances. For these applications, the combination of USB, serial interfaces, timers, external memory, and dual processing cores supports connected control systems with multiple concurrent workloads. The ROMless architecture is also appropriate when firmware updateability, code protection, or separate storage between the MCU and application data is required. PCB design must account for the 180-ball BGA footprint, high-speed routing requirements, decoupling, ground-plane continuity, and external memory implementation. Because the device is ROMless, boot configuration, programming, and external flash design are central to a working system rather than optional add-ons. Review the pin-description and connection tables in the NXP datasheet before assigning power, ground, clocks, and communication signals. This product page consolidates the manufacturer architecture description, package and connectivity details, procurement information, drop-in-family analysis, and practical implementation guidance into a single engineering reference. It also distinguishes verified pin-compatible family members from cross-reference candidates that do not establish true drop-in equivalence.

RFQ Contact
LPC43S30FET100E - 204MHz Cortex-M4/M0 MCU | NXP
LPC43S30FET100E

LPC43S30FET100E - 204MHz Cortex-M4/M0 MCU | NXP

The NXP LPC43S30FET100E is a 32-bit dual-core microcontroller built around an Arm Cortex-M4 processor and an Arm Cortex-M0 coprocessor. It operates at up to 204 MHz, provides 264 kB of SRAM, and is housed in a 100-TFBGA package measuring 9 x 9 mm. The device also includes an AES security engine, two high-speed USB controllers, Ethernet connectivity, advanced configurable timers, and serial general-purpose I/O. A dual-core microcontroller is an embedded processing device that executes application code on a primary Arm Cortex-M4 core while using an Arm Cortex-M0 core for dedicated control or peripheral tasks. This heterogeneous architecture belongs to the microcontroller hierarchy: embedded controller, 32-bit MCU, Arm Cortex-M processor, and system-on-chip. It can improve real-time workload partitioning compared with a single-core design without requiring a separate controller for every peripheral function. The LPC43S30FET100E combines a 204 MHz Cortex-M4 core with a Cortex-M0 coprocessor in one package. Up to 264 kB of SRAM supports protocol buffers, display data, and real-time control state. Integrated Ethernet supports connected equipment, while the dual high-speed USB controllers can simplify USB host or device connectivity. The AES engine adds hardware-assisted encryption for data protection and authenticated communication workflows. The LPC43S30 series combines conventional microcontroller peripherals with programmable and serial peripherals. SCTimer and PWM resources provide flexible timing and motor-control functions, while SGPIO extends serial I/O capability beyond standard UART and SPI interfaces. These resources allow an embedded design to consolidate functions that would otherwise require additional programmable logic, interface controllers, or discrete peripherals. Typical applications include industrial Ethernet controllers, connected test equipment, secure embedded gateways, USB-to-Ethernet bridges, high-speed data acquisition systems, and motor-control platforms. The Cortex-M4 core is suited to protocol processing and real-time control, while the Cortex-M0 coprocessor can service timing-sensitive or low-level tasks. Its 100-TFBGA footprint supports compact designs but requires careful escape routing and exposed-pad thermal management. Board design should follow the manufacturer pin and land-pattern guidance for the 100-TFBGA package. Place decoupling capacitors close to the supply pins, preserve the required via and ball-pitch constraints, and use thermal vias beneath the exposed pad. Confirm the PCB stack-up, assembly process, and ground-plane continuity before releasing a production design. This product page combines the LPC43S30FET100E core architecture and interface capabilities with practical design guidance, package information, sourcing answers, and a focused comparison of pin-compatible NXP options for engineers evaluating secure dual-core embedded platforms.

RFQ Contact
LPC43S30FET256E - 204MHz Dual-Core MCU | NXP | 256-LBGA
LPC43S30FET256E

LPC43S30FET256E - 204MHz Dual-Core MCU | NXP | 256-LBGA

NXP LPC43S30FET256E is a 32-bit dual-core Arm Cortex-M4/M0 microcontroller rated at 204 MHz, with 264 kB of SRAM and AES security hardware, packaged in a 256-LBGA 17 x 17 mm package. It is designed for embedded applications requiring real-time control, Ethernet, two high-speed USB controllers, and configurable peripheral functions. An Arm Cortex-M4 microcontroller is a 32-bit embedded processor built around the Arm Cortex-M architecture. The LPC43S30FET256E combines a Cortex-M4 main processor with a Cortex-M0 coprocessor, creating a platform within the hierarchy of microcontroller, embedded processor, and semiconductor. This dual-core arrangement allows control-intensive tasks and simpler auxiliary work to be organized within one device. Key device features include up to 264 kB of SRAM, a hardware AES engine, Ethernet connectivity, two high-speed USB controllers, SCTimer and PWM resources, and the Serial General-Purpose I/O interface. The Cortex-M0 coprocessor is code- and tool-compatible with the Cortex-M4 core and can provide up to 204 MHz performance with a simpler instruction set and reduced code footprint. The part is ROMless, so an external nonvolatile memory device is required for persistent program storage. The manufacturer identifies the LPC43S30FET256 family for embedded systems combining high-performance control, communications, and configurable timing. Its dual-core architecture can help partition interrupt-heavy or utility workloads, while the Cortex-M0 core supports energy-efficient execution. Typical applications include industrial automation controllers, Ethernet-connected embedded systems, USB host or device equipment, motor-control and power-management systems, and communications infrastructure requiring multiple serial peripherals. Two high-speed USB controllers are especially useful for systems that need simultaneous USB connectivity, while Ethernet supports network-connected monitoring and control functions. PCB design should account for the 256-ball BGA footprint, high-speed USB and Ethernet signal routing, and the external memory interface required by the ROMless architecture. Power sequencing, decoupling, and signal-integrity layout should follow the pin-description and layout guidance in the NXP documentation for the LPC43S30FET256 family. This product page combines the manufacturer overview, exact-orderable-package information, sourcing guidance, drop-in replacement analysis, and practical engineering considerations for the LPC43S30FET256E. It is intended to help engineers confirm architecture, memory, package, connectivity, and replacement requirements before beginning a 256-LBGA layout.

RFQ Contact
LPC43S50FET180E - 204MHz Dual-Core MCU | NXP | 180-TFBGA
LPC43S50FET180E

LPC43S50FET180E - 204MHz Dual-Core MCU | NXP | 180-TFBGA

The NXP Semiconductors LPC43S50FET180E is a 32-bit dual-core Arm Cortex-M4/M0 flashless microcontroller for embedded applications, operating up to 204 MHz in a 180-ball TFBGA package measuring 12 x 12 mm. It includes 264 kB of SRAM, an AES security engine, Ethernet, two high-speed USB controllers, LCD support, SCTimer/PWM peripherals, and an SGPIO interface. The E suffix identifies the lead-free ordering variant listed by NXP. A microcontroller is an integrated semiconductor that combines a processor core, memory, communication peripherals, and control logic on one device. The LPC43S50FET180E belongs to the Cortex-M4/M0 embedded-processing hierarchy, combining a higher-performance Cortex-M4 core with a Cortex-M0 coprocessor. This architecture supports real-time control workloads that benefit from deterministic peripheral access, interrupt handling, and flexible timer-based signal generation without requiring external flash. The device runs at up to 204 MHz and provides 264 kB of SRAM for working data. Its integrated AES engine supports hardware-assisted cryptographic operations. Advanced configurable peripherals include the State Configurable Timer/PWM module and the Serial General-Purpose I/O interface, which can simplify motor, lighting, communications, and industrial-control designs. Two high-speed USB controllers add flexible host or device connectivity, while integrated Ethernet supports networked embedded equipment. The dual-core architecture can partition control and communication work between the Cortex-M4 and Cortex-M0 cores. The Cortex-M4 core handles performance-intensive processing, while the Cortex-M0 core can manage lower-level tasks independently. This division can reduce synchronization overhead when firmware is carefully partitioned, although shared-memory access and inter-core synchronization still require deliberate design. The manufacturer product page identifies the part for embedded applications with a broad combination of connectivity and control peripherals. Typical uses include industrial automation, Ethernet-connected controllers, USB peripherals and hosts, human-machine-interface controllers with LCD output, and motor or power-control systems using the SCTimer/PWM blocks. The 180-TFBGA package offers a high pin count for parallel interfaces and dedicated peripheral connections, but it requires careful escape routing, multilayer PCB construction, and precise component placement. When designing the PCB, follow the NXP package drawing and pin-assignment table for every ball connection. Route high-speed USB and Ethernet signals as controlled-impedance traces, provide the specified decoupling network, and reserve adequate copper for power and ground distribution. Because the device is flashless, system firmware must be loaded into the 264 kB of SRAM or paired with an external memory interface rather than assuming internal program flash. This page consolidates the exact LPC43S50FET180E identification, manufacturer feature description, verified distributor references, package details, engineering application guidance, and same-footprint replacement analysis into one decision resource. It also distinguishes confirmed drop-in compatibility from options that would require board-level redesign, firmware changes, or validation before use.

RFQ Contact
LPC43S57JBD208 - 204MHz Cortex-M4/M0 MCU | NXP
LPC43S57JBD208

LPC43S57JBD208 - 204MHz Cortex-M4/M0 MCU | NXP

NXP Semiconductors LPC43S57JBD208 is a 32-bit dual-core Arm Cortex-M4/M0 microcontroller operating at up to 204 MHz, with 1 MB of flash memory, 136 kB of SRAM, and 16 kB of EEPROM in a 208-pin LQFP package measuring 28 x 28 mm. The Cortex-M4 handles the primary embedded workload while the Cortex-M0 coprocessor supports independent control tasks. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, data memory, and peripherals into one device. The Cortex-M4/M0 class belongs to the Arm Cortex-M family of 32-bit embedded processors. Within the electronics hierarchy, this device is a microcontroller IC, a semiconductor, and an embedded processing platform that can execute firmware while directly controlling memory, communications, security, display, and industrial I/O resources. The LPC43S57 family combines processing performance with integrated connectivity and security features. Verified product information identifies Ethernet connectivity, two USB interfaces, an LCD controller, an EMC engine, and an AES engine. These integrated resources reduce the need for separate peripheral devices when designing connected embedded systems. Its 136 kB SRAM provides substantially more working memory than many general-purpose microcontrollers, while the 1 MB flash capacity accommodates larger embedded code and data images. The 204 MHz Cortex-M4 core is designed for responsive real-time control, and the second Cortex-M0 core allows the system to divide control work between processors. This dual-core architecture can support concurrent tasks when firmware is partitioned appropriately. It is particularly relevant to industrial controllers, communications equipment, human-machine interfaces, and embedded systems that combine protocol handling with deterministic peripheral control. Typical applications include industrial Ethernet equipment, USB-connected control systems, LCD-equipped operator interfaces, secure embedded gateways, and networked factory automation nodes. Ethernet and dual USB support align with the device in connected machinery, while the LCD interface supports local status displays. The AES engine provides hardware-assisted encryption for designs requiring encrypted communication or protected firmware assets. PCB design should account for the 208-pin LQFP footprint, exposed power and ground requirements, high-speed USB routing, and Ethernet signal integrity. Differential USB and Ethernet pairs should be routed with controlled impedance and minimal discontinuity. Decoupling should be placed close to supply pins, and programming and debug access should be retained for production programming, field service, and firmware recovery. This page consolidates verified NXP product information, distributor pricing references, application guidance, and replacement analysis. It also distinguishes exact same-package alternatives from related LPC43S57 devices whose package pin counts differ, preventing a superficially similar part number from being presented as a true drop-in replacement.

RFQ Contact
LPC43S57JBD208E - Dual-Core 204 MHz MCU | NXP
LPC43S57JBD208E

LPC43S57JBD208E - Dual-Core 204 MHz MCU | NXP

The NXP LPC43S57JBD208E is a 32-bit dual-core Arm Cortex-M4/M0 microcontroller with up to 204 MHz performance, 1 MB of embedded flash, 136 kB of on-chip SRAM, and 16 kB of EEPROM in a 208-lead LQFP package. The primary Cortex-M4 core handles demanding control tasks while the energy-efficient Cortex-M0 coprocessor provides code- and tool-compatible execution for supporting workloads. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The LPC43S57 belongs to the embedded-controller hierarchy: Arm Cortex-M processor > 32-bit microcontroller > embedded processing system. Its dual-core architecture allows software to partition real-time control, communications, and monitoring functions, reducing the need for separate discrete processors when workload isolation is valuable. The LPC43S57JBD208E combines 1 MB of flash with 136 kB of SRAM and 16 kB of EEPROM. Its security hardware includes an AES engine, while its communications and storage interfaces include Ethernet, two USB interfaces, and a quad-SPI Flash Interface, or SPIFI. The State Configurable Timer provides configurable timing functions, and SGPIO supports flexible serial GPIO operation for compact industrial and control designs. Both Arm Cortex-M4 and Cortex-M0 cores use the Arm architecture and support the same core architecture in this device family. The M4 core is intended for higher-performance application processing, whereas the M0 coprocessor offers lower code density and energy efficiency for peripheral control, diagnostics, or background tasks. Running independent code on the two cores can improve partitioning, although developers must coordinate shared peripherals and memory carefully. Typical uses include industrial automation controllers, Ethernet-connected equipment, secure embedded gateways, motor and motion-control systems, building automation nodes, and data-acquisition equipment. The 208-LQFP package provides many external I/O options and is appropriate for multilayer boards requiring broad peripheral connectivity, high-voltage-adjacent isolation spacing, or serviceable leaded packages. PCB design should follow NXP's package pinout, power-supply, decoupling, and high-speed-layout guidance. Place decoupling capacitors close to the appropriate supply pins, provide clean power for both processor domains, route sensitive communications away from fast-switching nets, and confirm every alternate function before finalizing the 208-pin layout. Firmware must also enable clocks, pin multiplexing, and peripheral instances in the intended order during startup. This product page combines the manufacturer's architectural and memory details with package, interface, sourcing, and replacement guidance. It also distinguishes the closest same-package candidates by device family and suffix, helping engineers assess PCB compatibility before committing to a redesign or firmware migration.

RFQ Contact
LPC43S67JBD208E - 204MHz Dual-Core MCU 1MB | NXP
LPC43S67JBD208E

LPC43S67JBD208E - 204MHz Dual-Core MCU 1MB | NXP

The NXP Semiconductors LPC43S67JBD208E is a 32-bit dual-core Arm Cortex-M4/M0 microcontroller operating up to 204 MHz, with 1 MB of flash and 154 kB of on-chip SRAM in a 208-pin LQFP package. It is designed for high-performance embedded systems that need concurrent real-time control and higher-level application processing. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces into one device. The LPC43S67 belongs to the Arm Cortex-M embedded-control hierarchy and combines a 32-bit Cortex-M4 main core with an Arm Cortex-M0 subsystem for managing peripherals. This architecture supports deterministic control alongside more capable general-purpose processing without requiring multiple discrete processors. Key features include up to 1 MB of program flash, 154 kB of SRAM, 16 kB of EEPROM, Ethernet, two high-speed USB interfaces, LCD support, an AES engine, a quad SPI Flash Interface, advanced SCTimer/PWM peripherals, and Serial General Purpose I/O. The 208-LQFP package exposes the extensive mixed-signal, communications, timer, and general-purpose I/O resources required by industrial equipment. The dual-core organization allows the Cortex-M4 core to execute control and application software while the Cortex-M0 subsystem handles peripheral tasks. Ethernet, dual high-speed USB, LCD, AES, and configurable timer resources make the device suitable for connected industrial controllers, human-machine interfaces, data acquisition systems, and embedded gateways. The 3.3 V operating specification aligns the device with conventional industrial and consumer logic systems. Typical applications include factory automation controllers, building automation panels, networked data-acquisition equipment, motor-control systems, and instrumented human-machine interfaces. Designers should use the manufacturer pin-description table when assigning all 208 package pins and should preserve the recommended power, clock, reset, and decoupling layout to maintain reliable operation in demanding embedded environments. This product page combines the LPC43S67JBD208E architecture, memory configuration, package information, drop-in-family assessment, application guidance, and design considerations to help engineers evaluate the device beyond a basic distributor parameter listing.

RFQ Contact
LPC43S67JET100E - Dual-Core 204MHz MCU 1MB Flash | NXP
LPC43S67JET100E

LPC43S67JET100E - Dual-Core 204MHz MCU 1MB Flash | NXP

The NXP LPC43S67JET100E is a 32-bit dual-core Arm Cortex-M4/M0 microcontroller with a 204 MHz main processor, 1 MB of flash memory, and up to 154 kB of on-chip SRAM in a 100-TFBGA package measuring 9 x 9 mm. The LPC43S6x family combines a high-performance Cortex-M4 core with an independent Cortex-M0 subsystem for managing peripherals and supporting concurrent real-time workloads. Its connectivity features include Ethernet, two high-speed USB interfaces, and a quad SPI Flash Interface, while configurable peripherals support timers, PWM, serial GPIO, and LCD-oriented applications. The device also includes 16 kB of EEPROM, an AES engine, and EMC-oriented features for connected embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripheral interfaces on one integrated circuit. In the hierarchy of electronic components, the LPC43S67JET100E is a 32-bit embedded microcontroller, part of the Arm Cortex-M class of microcontrollers, and ultimately belongs to the broader semiconductor and embedded-computing category. Its dual-core architecture allows the Cortex-M4 core to execute application or network-control code while the Cortex-M0 subsystem handles peripheral management or real-time tasks, reducing the need for a separate microcontroller on complex boards. Key capabilities include a 204 MHz Arm Cortex-M4/M0 processor configuration, 1 MB of flash, and 154 kB of SRAM. The Cortex-M0 subsystem supports the LPC43S6x architecture's division of work between the primary processor and dedicated peripheral handling. Ethernet and two high-speed USB interfaces make the device suitable for connected industrial, communications, and control equipment, while the quad SPI Flash Interface supports external serial-memory expansion. An AES engine provides hardware assistance for cryptographic operations, and the 16 kB EEPROM provides nonvolatile storage for configuration or calibration data. The LPC43S6x integrates advanced configurable peripherals such as SCTimer/PWM and Serial General Purpose I/O, allowing designers to tailor timer channels, signal routing, and I/O behavior for application-specific timing and control requirements. This integration is especially useful in systems that need deterministic peripheral handling while the main Cortex-M4 core handles protocols, control logic, or higher-level software. The Ethernet interface also makes the MCU suitable for gateways and network-connected embedded equipment without requiring a separate communications processor. Typical uses include industrial Ethernet controllers, USB-connected data acquisition equipment, building automation controllers, embedded gateways, motor and motion-control platforms, and connected test systems. The 100-TFBGA package supports compact designs but requires careful PCB layout with multiple power and ground connections. Designers should use the manufacturer's pin-description table, power-supply recommendations, and decoupling requirements when assigning the 100-ball land pattern and planning high-speed USB or Ethernet signal routing. The main design trade-off is package density: the 9 x 9 mm TFBGA minimizes PCB area but complicates assembly, inspection, and prototype rework compared with a leaded package. Stable rails, short return paths, controlled impedance routing, and careful exposed-ball layout are therefore more important than in a large-outline controller. This page also organizes the device's pricing route, replacement options, comparison parameters, and practical integration guidance for faster engineering evaluation.

RFQ Contact
LPC43S67JET256E - 204MHz Dual-Core 1MB MCU | NXP
LPC43S67JET256E

LPC43S67JET256E - 204MHz Dual-Core 1MB MCU | NXP

The NXP Semiconductors LPC43S67JET256E is a 32-bit dual-core Arm Cortex-M4/M0 microcontroller operating up to 204 MHz, with up to 1 MB of flash and 154 kB of on-chip SRAM in a 256-LBGA package measuring 17 x 17 mm. The device includes an Arm Cortex-M0 coprocessor and an Arm Cortex-M0 subsystem for peripheral management, combining application processing with dedicated I/O handling. It also provides 16 kB of EEPROM and a quad SPI Flash Interface, or SPIFI, for external memory connectivity. A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication interfaces, timers, and other peripherals into one component. The LPC43S6x family belongs to the Arm Cortex-M microcontroller hierarchy and combines high-performance control processing with an independent Cortex-M0 subsystem. This architecture can reduce interrupt-related overhead in communication-heavy embedded systems while retaining a broad set of configurable peripherals. Key features include a maximum core frequency of 204 MHz, flash storage organized as 1 MB of 1M x 8, and 154 kB of SRAM. The platform supports Ethernet, two high-speed USB interfaces, LCD connectivity, an EMC cryptographic engine, and AES functionality according to the manufacturer product information. Configurable SCTimer/PWM blocks and serial general-purpose I/O support deterministic timing and peripheral interconnection, while SPIFI expands the available external storage interface. The dual-core architecture separates the principal Cortex-M4 execution role from Cortex-M0-based peripheral management. This can help designers partition network handling, control logic, and real-time I/O tasks more predictably than a single-core implementation. Memory capacity of up to 1 MB supports a larger embedded code and data footprint, while 154 kB of SRAM provides working space for protocol stacks, buffers, graphics, and application state. The package is a compact 256-LBGA intended for high-density embedded assemblies. Typical uses include industrial Ethernet controllers, connected industrial equipment, high-speed USB peripherals, human-machine interfaces with LCD support, secure embedded gateways, and communications equipment requiring substantial flash and SRAM. The Ethernet and USB capabilities also make the device suitable for protocol bridges, data acquisition systems, and embedded network interfaces that need more computation than a basic low-end microcontroller provides. Board design must account for the 17 x 17 mm BGA footprint, ball pitch, power-supply sequencing, decoupling, and programming access. Pin multiplexing and peripheral allocation should be checked against the manufacturer's reference manual before assigning signals. The independent Cortex-M0 subsystem also requires deliberate firmware partitioning to prevent peripheral servicing conflicts with the main application. This product page organizes the LPC43S67JET256E core specifications, sourcing options, application guidance, and verified drop-in alternatives. It also highlights package, memory, communications, and software-design considerations that help engineers evaluate the MCU before beginning PCB layout and firmware integration.

RFQ Contact
LPC43S70FET256E - Dual-Core 204MHz MCU | NXP Semiconductors
LPC43S70FET256E

LPC43S70FET256E - Dual-Core 204MHz MCU | NXP Semiconductors

The NXP Semiconductors LPC43S70FET256E is a dual-core 32-bit Arm Cortex-M4/M0 microcontroller operating at up to 204 MHz, with 282 kB of SRAM and a 256-LBGA package measuring 17 x 17 mm. It is designed for embedded applications that require deterministic control, extensive connectivity, and an independent Cortex-M0 subsystem for peripheral management. A microcontroller is a programmable semiconductor device that integrates a processor core, memory interfaces, communications peripherals, timers, and control logic into one component. The LPC43S70 belongs to the Arm Cortex-M4 MCU family, where the primary Cortex-M4 core handles application processing while the Cortex-M0 subsystem offloads peripheral control. This architecture helps reduce contention on the main bus and supports responsive real-time behavior in industrial, communications, and consumer embedded systems. The device combines a 3-stage, Harvard-architecture Cortex-M4 core with a separate Cortex-M0 coprocessor. Its peripheral set includes the State Configurable Timer, also known as SCTimer/PWM, and the Serial General Purpose I/O interface, or SGPIO. These resources allow designers to implement flexible pulse-width modulation, timing, serial I/O expansion, and communication functions without depending entirely on external programmable logic. The LPC43S70FET256E also integrates an AES engine for hardware-assisted encryption. In an embedded design, this engine can offload cryptographic operations from the main CPU, improving throughput for protected data transfer, authentication, and secure firmware workflows. The part is identified as ROMless in distributor technical records, while one distributor summary also identifies 64 kB of on-chip ROM; verify the exact memory architecture for the selected ordering code in the manufacturer data sheet before finalizing the boot-memory design. Typical applications include industrial automation controllers, communications gateways, motor and motion-control equipment, connected embedded systems, and secure control platforms. Its dual-core architecture is particularly useful where background peripheral servicing must continue while the primary core executes application logic. The 204 MHz Cortex-M4 performance also supports more responsive control loops and protocol handling than lower-speed microcontroller classes. PCB design must account for the dense 256-ball BGA footprint and the manufacturer's decoupling, power-routing, and exposed-pad requirements. Place power and ground connections according to the data-sheet layout, provide the specified local capacitance, and route high-current and sensitive signals away from switching nodes. Use the device errata and current reference design information when validating startup behavior, flash programming, and peripheral configurations. This product record combines the manufacturer architecture description with distributor package and ordering information, then adds application guidance, engineering cautions, and a focused comparison structure. It is intended to support early feasibility decisions, source evaluation, and hardware-planning discussions rather than replace the complete data sheet, reference manual, or errata documentation.

RFQ Contact
LPC54101J256UK49Z - 100MHz Cortex-M4 MCU, 256KB Flash, 49-WLCSP | NXP
LPC54101J256UK49Z

LPC54101J256UK49Z - 100MHz Cortex-M4 MCU, 256KB Flash, 49-WLCSP | NXP

The NXP LPC54101J256UK49Z is a low-power 32-bit ARM Cortex-M4 microcontroller with 256 KB of on-chip Flash and 100 MHz CPU speed, packaged in a 49-ball WLCSP (3.29 x 3.29 mm). It belongs to the LPC541xx family, NXP's next-generation power-efficient MCU line targeting always-on sensor-processing and battery-powered applications, and provides flexible peripherals for mixed-signal IoT designs. What is an ARM Cortex-M4 microcontroller? An ARM Cortex-M4 microcontroller (MCU) is a 32-bit RISC processor featuring the Thumb-2 instruction set, hardware single-precision FPU, optional DSP extensions, and a tightly-coupled NVIC. MCUs integrate the CPU core, Flash, SRAM, timers, ADC, communication peripherals and power management into a single chip. The Cortex-M4 class sits between the Cortex-M0+ (lowest power) and Cortex-M7 (highest performance) within ARM's Cortex-M taxonomy, offering an excellent balance of computational throughput, deterministic interrupt response and energy efficiency. The LPC5410x family occupies a hypernym position of: microcontroller -> embedded processor -> semiconductor -> integrated circuit. The LPC54101J256UK49Z runs from a 1.62 V to 3.6 V supply, integrates 256 KB Flash, 104 KB SRAM, and supports up to 49 GPIOs depending on package. It includes a 12-bit, 5 MSPS ADC, multiple serial interfaces (USART, SPI, I2C), flexible timers, and a ROM-based bootloader with crypto and ISP support. The Cortex-M4 core includes a single-precision FPU and DSP extensions for efficient sensor-fusion math, while low-power modes (Sleep, Deep-sleep, Power-down, Deep-power-down) deliver quiescent currents suitable for coin-cell and energy-harvesting designs. Architecturally, the LPC5410x series is offered as either single Cortex-M4 or dual Cortex-M4 + Cortex-M0+ variants. The '01' suffix here denotes the single-core M4 configuration. The 49-WLCSP option minimises board area, addressing space-constrained wearables, hearables and IoT edge nodes where every square millimetre matters. Hardware-level features such as wake-up from multiple pin sources, RTC with calendar mode, and a power management unit with integrated LDO give the part its always-on character. Typical applications include wearable fitness and health sensors, IoT edge sensor nodes, low-power wireless modules, industrial sensor hubs, consumer hearables, and battery-powered human-machine interface controllers. The combination of Cortex-M4 DSP performance and deep-sleep currents in the single-digit microamp range makes this MCU particularly attractive for always-listening audio front-ends and motion-processing wearables. When designing, carefully manage the WLCSP land pattern and under-bump metallurgy for assembly yield; the exposed balls are 0.4 mm pitch. Decouple VDD and VDDIO close to each ball pair and follow the reference manual's recommended power-sequencing timing. Always respect the absolute maximum ratings on VBAT and VDD to avoid latch-up during battery hot-plug events. This page synthesises verified distributor pricing, package-compatible alternatives, and practical design notes for engineers selecting the LPC54101J256UK49Z into power-constrained embedded designs.

RFQ Contact
LPC54102J512UK49Z - 100MHz Dual-Core Cortex-M4/M0+ MCU 512KB | NXP
LPC54102J512UK49Z

LPC54102J512UK49Z - 100MHz Dual-Core Cortex-M4/M0+ MCU 512KB | NXP

The NXP LPC54102J512UK49Z is a low-power 32-bit dual-core microcontroller based on the ARM Cortex-M4 (with FPU) and Cortex-M0+ architecture, delivering up to 100MHz core frequency with 512KB on-chip Flash memory. The part integrates peripheral-rich connectivity and is housed in a compact 49-ball WLCSP (3.29mm x 3.29mm) package designed for space-constrained wearables, sensor nodes, and portable devices. The LPC541xx family represents NXP's next-generation power-efficient MCU portfolio. These dual-core MCUs pair a Cortex-M4 (application processing, DSP, FPU) with a Cortex-M0+ (peripheral and low-power housekeeping) on the same silicon. This asymmetric multiprocessing topology - formally called asymmetric dual-core (ADC) - allows designers to isolate time-critical or low-power peripheral servicing on the M0+ while the M4 application core sleeps. Architecturally, the LPC541xx sits inside the broader ARM Cortex-M hierarchy (Cortex-M4 -> Cortex-M processor family -> 32-bit RISC microcontrollers) and is positioned in NXP's general-purpose low-power MCU segment, competing with STM32L4 and EFM32 families. The device features include 104KB SRAM, multiple high-speed serial interfaces (USB 2.0 Full-Speed with on-chip PHY, SPI, I2C, UART), 12-bit ADC, and an integrated power management unit with multiple low-power modes. Per the NXP datasheet, active-mode current is approximately 100 uA/MHz at 3.0V with the M4 running, and deep-sleep current is in the single-digit microamp range when the M0+ continues peripheral servicing. Key features include dual-core Cortex-M4F + Cortex-M0+ at 100MHz, 512KB Flash, 104KB SRAM, USB 2.0 FS device/host, up to 12-bit 12-channel ADC, multiple low-power modes with sub-uA deep-sleep retention, and 49-WLCSP package. The compact 3.29mm x 3.29mm WLCSP footprint enables wearable form factors. Typical applications include always-on wearable devices, IoT sensor hubs, low-power wireless sensor nodes, smart home controllers, battery-powered consumer electronics, and HMI subsystems requiring simultaneous user-interface processing and low-power peripheral handling. Design considerations for this part include careful PCB routing under the WLCSP balls (the package has a 0.4mm pitch - per the WLCSP design guide, NSMD pads and microvia-in-pad or dog-bone escape routing are recommended), supply decoupling of at least 0.1uF + 4.7uF adjacent to each power pin, and boot-pin strapping to select ISP vs. internal Flash boot. Per the NXP datasheet, the dual-core boot sequence is configurable via the shared mailbox register and must be initialized in firmware. This page synthesizes distributor pricing, drop-in LPC541xx family alternatives, and practical design notes (WLCSP PCB layout, dual-core boot sequencing, low-power mode transitions) not found in the manufacturer datasheet.

RFQ Contact
LPC54113J256UK49Z - ARM Cortex-M4 256KB Flash MCU | NXP
LPC54113J256UK49Z

LPC54113J256UK49Z - ARM Cortex-M4 256KB Flash MCU | NXP

The NXP LPC54113J256UK49Z is a low-power 32-bit microcontroller from the LPC541xx family, featuring a single ARM Cortex-M4 core running at up to 100 MHz, 256 KB of on-chip Flash, and 192 KB of SRAM, packaged in a 49-pin WLCSP (3.44 x 3.44 mm). The device targets power-efficient always-on applications where a balance of compute throughput and energy budget is critical. It is the single-core variant (no Cortex-M0+ coprocessor) of the LPC5411x series, designed to minimize active and sleep current while retaining DSP and FPU capability at the M4 core. What is an ARM Cortex-M4 microcontroller? A Cortex-M4 MCU is a 32-bit RISC processor designed by Arm and licensed to silicon vendors; it is part of the Cortex-M family which sits under the broader Arm architecture umbrella. MCUs integrate CPU core, memory (Flash/SRAM), peripherals (ADC, timers, communication blocks), and power management on a single die, serving the role of the central controller in an embedded system. The Cortex-M4 specifically introduces single-precision FPU and DSP extensions versus the Cortex-M3, while remaining pin- and tool-compatible for code that does not use the FPU. Key features of the LPC54113J256UK49Z include a 12-bit resolution ADC, 37 configurable I/O pins, an operating voltage range of 1.62 V to 3.6 V, and an extended industrial temperature range from -40 C to +105 C. The WLCSP-49 package occupies only ~11.8 mm squared of PCB area, making it suitable for compact wearables and sensor nodes where board real estate is constrained. The LPC541xx architecture uses a low-leakage process with multiple low-power modes (Sleep, Deep-Sleep, Power-down, Deep Power-down) and a flexible ROM-based boot loader. Peripherals include multiple USART, SPI, I2C interfaces, timers, and a 12-bit ADC with sample rates suitable for sensor acquisition. Typical applications include IoT sensor nodes, wearable health monitors, BLE-enabled HID devices, low-power wireless sensor hubs, and battery-powered industrial sensor endpoints where the M4's signal-processing capability is combined with aggressive sleep-current management. Design consideration: The WLCSP package requires careful PCB pad design and under-bump metallization; reflow profile must follow JEDEC J-STD-020 MSL handling rules to avoid package cracking. Confirm that your in-house manufacturing supports WLCSP assembly before committing to this variant. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, and reflects verified web data as of 2026-10-08.

RFQ Contact
LPC54606J256ET180551 - 180MHz Cortex-M4 MCU 256KB | NXP
LPC54606J256ET180551

LPC54606J256ET180551 - 180MHz Cortex-M4 MCU 256KB | NXP

The NXP LPC54606J256ET180551 is a 32-bit ARM Cortex-M4 microcontroller operating at up to 180 MHz with 256 KB of on-chip flash memory, housed in a 180-ball TFBGA (12 x 12 mm) package. It belongs to the LPC546xx family, which NXP positions for embedded applications requiring a rich peripheral set, very low power consumption, and enhanced debug features. A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripherals such as timers, ADCs, and communication interfaces. Within the semiconductor hierarchy, the LPC54606 sits under the category of 32-bit microcontrollers -> ARM Cortex-M4 based MCUs -> general-purpose embedded processors. The Cortex-M4 core adds DSP instructions and single-cycle MAC, letting the LPC546xx family support complex algorithms in data-intensive applications. Key features of the LPC54606J256ET180551 include the 180 MHz Cortex-M4 core, 262 KB (256 KB usable) of flash program memory, 145 general-purpose I/O lines, integrated ADC channels, DMA channels, and PWM outputs. The TFBGA-180 (12x12 mm) ball grid array provides high I/O density in a compact surface-mount footprint suitable for two-sided PCB assembly. Technically, the LPC546xx family combines the power efficiency of the Arm Cortex-M4 core with multiple high-speed connectivity options and advanced timers, per the NXP LPC546xx product data sheet. External memory interfaces extend the on-chip flash, and the family scales up to 512 KB flash, which protects software investment across memory variants. The 21-bit address bus and 16-bit external data bus support memory-mapped expansion. Typical applications include industrial automation and motor control (leveraging PWM outputs and ADC channels), consumer and IoT devices requiring high GPIO counts, and embedded systems needing DSP-class signal processing such as digital filtering and sensor fusion. When designing with this device, verify the exact ordering-code suffix: the 551 suffix denotes a specific packing/reel option of the LPC54606J256ET180, and the E variant (LPC54606J256ET180E) is the related ordering code seen at distributors - always cross-check pinout and temperature range on the LPC546xx datasheet before finalizing the BOM. This page synthesizes distributor pricing, drop-in alternatives from the same pin-compatible LPC546xx TFBGA-180 family, and practical design notes not found in a single manufacturer datasheet, providing unique cross-reference and selection value.

RFQ Contact
LPC54606J512BD100E - 220MHz Cortex-M4 MCU 512KB Flash | NXP
LPC54606J512BD100E

LPC54606J512BD100E - 220MHz Cortex-M4 MCU 512KB Flash | NXP

The NXP LPC54606J512BD100E is a power-efficient 32-bit ARM Cortex-M4 microcontroller with FPU and DSP instructions, operating at up to 220 MHz, integrating 512 KB of on-chip Flash and 200 KB SRAM in a 100-pin LQFP package (14x14 mm). It supports a wide 1.71V to 3.6V supply range and is rated -40C to +105C for industrial environments. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for program code and SRAM for data), peripherals, and I/O. The Cortex-M4 is an ARM processor core designed for embedded applications, combining deterministic interrupt response with DSP extensions and a single-precision floating-point unit (FPU). The LPC546xx family in particular targets low-power, high-performance applications, sitting in the ARM Cortex-M4 tier below Cortex-M7 but above Cortex-M0+ devices in computational capability. Key features include a quad SPI Flash Interface (SPIFI) for low-cost memory expansion, one high-speed and one full-speed USB controller (host/device), 10/100 Ethernet with AVB support, CAN FD, an LCD controller, a Smart Card Interface, SD/MMC, an External Memory Controller (EMC), and a DMIC subsystem with PDM microphone interface. Twelve 12-bit ADCs and a 10-bit DAC support analog signal acquisition, while 21 communication interfaces aggregate data for IoT gateways. The device uses a Cortex-M4 core with single-precision FPU, DSP/SIMD instructions, and a Memory Protection Unit. An internal oscillator with PLL generates the 220 MHz system clock, and a low-power RTC with separate battery domain supports sleep modes drawing only a few microamperes, enabling battery-backed always-on designs. Typical applications include industrial HMI with LCD, IoT gateways aggregating multiple sensor buses, smart energy metering with CAN FD, audio front ends with PDM microphones, and connected medical devices needing Ethernet/USB. The integrated peripherals replace several external components, shrinking BOM and PCB area. When designing, choose MCUXpresso SDK for firmware development and provision the SWD/JTAG interface for debug. Place 100 nF + 10 uF decoupling close to each VDD pin and route VDD/VSS pairs symmetrically. This page synthesizes distributor pricing across DigiKey, Mouser, Arrow and Heisener, verified cross-reference alternatives, and practical design notes not consolidated on the manufacturer product page.

RFQ Contact
LPC54S001JEV180 - 180MHz ARM Cortex-M4 MCU, 4MB Flash | NXP
LPC54S001JEV180

LPC54S001JEV180 - 180MHz ARM Cortex-M4 MCU, 4MB Flash | NXP

The NXP LPC54S001JEV180 is a 180 MHz ARM Cortex-M4 microcontroller with FPU, 4 MB on-chip flash, and integrated security features, housed in a 180-pin LBGA package. It belongs to the LPC54S0xx family (the secure variant of the LPC540xx series), engineered for embedded applications demanding low power, rich peripherals, and enhanced debug. An ARM Cortex-M4 microcontroller (MCU) is a 32-bit processor core built on the ARMv7-M architecture, optimized for deterministic real-time control. The Cortex-M4 sits in the broader taxonomy of microcontrollers -> embedded processors -> semiconductors -> integrated circuits. The 'S' in LPC54S0xx denotes the security-enabled sub-family, adding features such as hardware cryptography, secure boot, and a secure key storage unit not present in the standard LPC540xx line. These features position the part for connected, IP-protected embedded products. Key features include a 180 MHz Cortex-M4 core with single-precision FPU and MPU, up to 4 MB on-chip flash, up to 360 KB SRAM, and a peripheral complement that includes multiple high-speed serial interfaces, an LCD controller, and a 12-bit ADC. Power-saving modes and on-chip voltage regulation minimize active and standby consumption, while the Secure Boot / Hardware Crypto engine supports AES, SHA, and secure key storage. The LBGA-180 package provides the pin count required to expose the full peripheral set without multiplexing. Architecturally, the LPC54S0xx family uses a low-power 90 nm process and integrates an on-chip DC-DC converter that powers the core from a single external supply, simplifying board design. The bus matrix supports parallel peripheral access for deterministic DMA throughput, and the MPU enables isolation of trusted and untrusted code regions - a foundational primitive for security-aware firmware. Typical applications include secure IoT gateways, industrial HMI with rich graphics, smart-metering endpoints, and embedded point-of-sale terminals where cryptographic acceleration and tamper detection are required. The device is also used in factory-automation controllers and connected medical peripherals requiring deterministic real-time response. When designing with this part, ensure the LBGA-180 land pattern and stack-up support the 0.8 mm ball pitch, and provide a clean 3.3 V supply with adequate bulk decoupling. Migration from the pin-compatible LPC546xx is supported per NXP application note AN13168, though the JxM variants are not compatible due to internal QSPI flash. This page synthesizes the LPC54S001JEV180 datasheet, parametric comparison against same-family variants, drop-in alternatives, and practical design notes that go beyond the manufacturer product page.

RFQ Contact
LPC54S018JET180E - 180MHz Cortex-M4 MCU, 360KB SRAM | NXP
LPC54S018JET180E

LPC54S018JET180E - 180MHz Cortex-M4 MCU, 360KB SRAM | NXP

The NXP Semiconductors LPC54S018JET180E is a 32-bit ARM Cortex-M4 microcontroller from the LPC540xx family, operating at 180 MHz and housed in a 180-TFBGA (12x12 mm) package with 145 I/O pins. It is a ROMless security-enhanced variant delivering 360 KB of on-chip SRAM and is built around a Harvard architecture with a 3-stage pipeline for high-throughput deterministic performance. According to the NXP product page and distributor listings, this part targets next-generation IoT endpoints that need real-time responsiveness with hardware cryptography. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, and a rich set of peripherals such as timers, communication controllers and analog blocks. The LPC54S018JET180E sits in the Cortex-M4 tier of ARM's embedded roadmap: M4 adds DSP extensions and single-precision floating point on the same Thumb-2 ISA foundation shared with Cortex-M0/M0+/M3, making it suitable for signal processing as well as control. The 'S' suffix in the part number denotes the security-enhanced sub-family with hardware AES, secure boot and TrustZone-M style isolation, while the '0' indicates ROMless operation that pairs with external SPIFI flash. Key differentiating features of the LPC54S018JET180E include a high-speed USB 2.0 controller with on-chip PHY (host+device), a 10/100 Ethernet MAC with AVB support, an LCD interface capable of driving TFT panels directly, and a quad-SPI Flash Interface (SPIFI) for low-cost program memory expansion. Communication peripherals include CAN FD, two CAN 2.0B controllers, smart-card interfaces, I2S, DMIC/PDM microphone input, SD/MMC, and an External Memory Controller (EMC) for SRAM/PSRAM/NOR/NAND expansion. The 360 KB of SRAM is large for the class and lets designers keep full TCP/IP stacks or graphics framebuffers in RAM. Typical applications for this MCU are industrial HMI panels with TFT LCD, secure IoT gateways combining Ethernet AVB and CAN FD, point-of-sale terminals requiring smart-card interfaces, audio front-ends with PDM microphones, and connected appliances that need both USB device and Ethernet. The security extensions make it a strong fit for any design that demands secure boot, encrypted firmware updates or hardware key storage. When designing with the LPC54S018JET180E, ensure the SPIFI flash is selected with the correct boot mode and that decoupling on the 3.3 V and 1.2 V rails follows NXP's recommended LC network in the data sheet. The 180-TFBGA package demands 4-layer or higher PCB stack-ups with via-in-pad or dog-bone fan-outs, and the package thermal resistance allows operation up to 105 °C junction temperature with proper copper. This page synthesizes distributor pricing from DigiKey and Mouser, package-level drop-in alternatives from the same LPC54(S)0xx family, and practical design notes that complement the NXP LPC54018JxM/LPC54S018JxM data sheet.

RFQ Contact
LPC5526JBD64E - Cortex-M33 150MHz 256KB MCU | NXP
LPC5526JBD64E

LPC5526JBD64E - Cortex-M33 150MHz 256KB MCU | NXP

The NXP LPC5526JBD64E is a 32-bit Arm Cortex-M33 microcontroller running at up to 150 MHz with 256 KB on-chip flash memory, housed in a 64-pin HTQFP (10x10 mm) package. It belongs to the LPC552x/S2x family within the EdgeVerse edge computing platform, the world's first general-purpose Cortex-M33-based MCU series. A microcontroller (MCU) is a single-chip embedded computer integrating a processor core, memory, and peripherals on one die. The LPC5526 sits in the general-purpose MCU hierarchy: Arm Cortex-M33 core -> 32-bit embedded microcontroller -> NXP LPC5500 family -> EdgeVerse edge computing platform. Arm TrustZone technology provides hardware-enforced security partitioning, a differentiator versus older Cortex-M4/M3 parts. Key features include the Cortex-M33 (Armv8-M mainline) core with a Memory Protection Unit (MPU), built-in Nested Vectored Interrupt Controller (NVIC), and an NMI input with selectable sources. The device leverages a cost-effective 40-nm NVM process technology. According to NXP, the LPC552x/S2x family offers pin-, software-, and peripheral-compatibility across family members, accelerating time to market. The 150 MHz core frequency with dual-bank flash execution supports demanding control and signal-processing workloads. The 256 KB flash accommodates complex application firmware plus in-system programming headroom, while the rich peripheral set (per the manufacturer datasheet) serves mixed-signal embedded designs. Typical applications include industrial automation and motor control, IoT edge nodes requiring TrustZone security, consumer appliances, and embedded sensing systems where 150 MHz 32-bit performance is needed without the cost of larger LPC55S6x parts. Design consideration: confirm the exact RAM size, supply voltage range, and peripheral counts against the manufacturer datasheet before finalizing the schematic, as these values vary within the family. The package_svg and footprint for the 64-HTQFP is shared across all LPC552x JBD64 variants, enabling PCB reuse during memory or security upgrades. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Contact
LPC5526JBD64K - 150MHz Cortex-M33 MCU, 256KB Flash | NXP
LPC5526JBD64K

LPC5526JBD64K - 150MHz Cortex-M33 MCU, 256KB Flash | NXP

The NXP LPC5526JBD64K is a 32-bit Arm Cortex-M33 microcontroller running at up to 150 MHz with 256 KB of on-chip flash memory, housed in a 64-pin HTQFP (10x10 mm) exposed-pad package and supplied in tray packaging. It belongs to the LPC552x/S2x MCU family within NXP's EdgeVerse edge computing platform, the world's first general-purpose Cortex-M33-based MCU series, fabricated on a cost-effective 40-nm NVM process technology. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the lowest tier of the embedded processing hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor device. MCUs execute dedicated control tasks in electronic systems, and the LPC552x family extends this role with hardware-based security and dual-core scalability. Key features of the LPC5526JBD64K include the Arm Cortex-M33 core (r0p3) with a Memory Protection Unit (MPU) and built-in Nested Vectored Interrupt Controller (NVIC), a non-maskable interrupt (NMI) input with selectable sources, and a FlexComm serial interface architecture that lets each instance be configured as UART, SPI, or I2C. The family datasheet also documents CASPER cryptographic co-processor support, USB high-speed, SDIO, SCTimer/PWM, a Programmable Logic Unit (PLU), and a 16-bit 1.0 Msamples/sec ADC across the LPC552x/S2x series. Technical depth comes from the 40-nm process node, which lowers cost per function while the Cortex-M33 with TrustZone-class security features addresses modern IoT security requirements. The PLU allows logic customization without an FPGA, and the FlexComm structure reduces external glue logic. Typical applications include industrial control nodes, IoT edge devices requiring secure connectivity, and consumer appliances needing motor control, USB connectivity, and analog sensing. The 1.0 Msps ADC and SCTimer/PWM directly serve these use cases. A key design consideration: the 64-pin HTQFP with exposed pad requires a well-designed thermal and ground land pattern on the PCB for reliable power delivery and signal integrity at 150 MHz. This page synthesizes distributor pricing, drop-in family alternatives, and design guidance not found in the manufacturer datasheet.

RFQ Contact