Products (44,000+)

LT1055ACH - 16V/us Precision JFET Op Amp | Analog Devices
LT1055ACH

LT1055ACH - 16V/us Precision JFET Op Amp | Analog Devices

The Analog Devices LT1055ACH is a precision, high-speed JFET-input operational amplifier with a 16 V/us slew rate, 6.5 MHz gain-bandwidth product, and typically 50 uV input offset voltage in a TO-5 metal-can package. Its precision is maintained with typically 1.2 uV/°C offset drift, while the JFET input stage provides very low bias current, including 40 pA at 70°C and 500 pA at 125°C. An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages while providing high open-loop gain. The LT1055ACH belongs to the precision JFET-input operational-amplifier family, combining low input bias current with substantially higher speed than many conventional precision amplifiers. This combination makes it useful for instrumentation, sensor conditioning, buffer, and signal-processing circuits that must preserve weak signals without introducing excessive bias error. Key performance features include a guaranteed maximum offset voltage of 150 uV, a guaranteed maximum drift of 4 uV/°C, and guaranteed input bias current of 150 pA at 70°C and 2.5 nA at 125°C. The simultaneous availability of 16 V/us slew rate and 6.5 MHz gain-bandwidth product distinguishes the LT1055 from slower precision JFET amplifiers. These characteristics support accurate amplification of signals containing both low-level DC information and higher-frequency content. The LT1055/LT1056 family combines precision specifications with high-speed performance. Its JFET input stage supports low-current measurements, while its offset and drift characteristics improve DC accuracy in instrumentation chains. The 16 V/us slew rate allows the amplifier to respond quickly to moderate-amplitude signal changes without imposing the slew-rate limits associated with many precision-only amplifiers. Typical uses include low-level transducer conditioning, buffered sensor outputs, laboratory instrumentation, photodiode amplifiers, audio and communication signal paths, active filters, and analog measurement systems. The TO-5 package provides a conventional through-hole mechanical format suitable for instrumentation equipment and designs requiring a metal-can package rather than a surface-mount outline. When designing around the LT1055ACH, use the manufacturer's pinout and connection guidance to preserve the common JFET-input configuration and provide appropriate output-load isolation. Input and feedback networks should be arranged to minimize parasitic capacitance and leakage, particularly when measuring currents in the picoamp range. Verify operating supply range, input common-mode limits, output swing, and thermal performance against the manufacturer datasheet before releasing the design. This page combines the manufacturer's published performance figures with practical selection guidance, drop-in family information, application-oriented design notes, and a parameter comparison for engineers evaluating the LT1055ACH in precision analog signal chains.

RFQ Contact
LT1055CH - 6.5MHz Precision JFET Op Amp | Analog Devices
LT1055CH

LT1055CH - 6.5MHz Precision JFET Op Amp | Analog Devices

The Analog Devices LT1055CH is a precision, high-speed JFET-input operational amplifier with 6.5 MHz gain-bandwidth product, 16 V/µs slew rate, typically 50 µV offset voltage, and low input bias current, packaged in an 8-lead TO-5 metal can. It combines the high input impedance and low bias current associated with JFET inputs with the speed and precision required by demanding analog signal chains. A JFET-input operational amplifier is a voltage-feedback amplifier whose input stage uses junction field-effect transistors. This amplifier class provides very high input impedance, low input bias current, and low input-current noise while preserving accurate DC behavior. In the broader semiconductor hierarchy, the LT1055CH belongs to the operational-amplifier family within analog ICs and instrumentation amplification, where it is used to amplify low-level signals without loading the source. The LT1055 family combines several key performance features. Its maximum offset voltage is 150 µV, its typical offset drift is 1.2 µV/°C, and the verified specifications list guaranteed maximum drift as high as 4 µV/°C depending on temperature grade and conditions. Typical input bias current is 40 pA at 70°C and 500 pA at 125°C. These characteristics make the device suitable for precision current-to-voltage conversion, instrumentation, data acquisition, and feedback networks requiring low input current. With a 6.5 MHz gain-bandwidth product and 16 V/µs slew rate, the LT1055CH responds quickly enough for video, communications, active filtering, and pulse-processing circuits. Its JFET input stage avoids the substantially higher bias current commonly associated with bipolar input amplifiers, helping preserve accuracy in high-impedance sources. Precise common-mode, supply, noise, and input-current limits must still be selected from the manufacturer datasheet for the final design. Typical applications include precision transimpedance stages, low-leakage sensor interfaces, high-impedance buffer amplifiers, active analog filters, and communication-signal conditioning. In a transimpedance amplifier, the low bias current reduces current-error and settling effects. In an active filter, the combination of precision offset and 6.5 MHz bandwidth supports accurate signal processing over a useful frequency range. The primary design consideration is to preserve the LT1055CH's low-noise and low-offset benefits without overdriving the input or output stage. Designers should verify supply voltage, common-mode range, output swing, stability, and compensation requirements against the manufacturer datasheet before finalizing the circuit. PCB layout should keep sensitive input nodes short and provide adequate bypassing close to the supply pins. This page consolidates verified manufacturer specifications, distributor availability information, packaging details, source links, and engineering selection guidance. It distinguishes published LT1055/LT1056 family information from values that were not supplied by the verified sources, avoiding unsupported replacement or pricing claims.

RFQ Contact
LT1055S8 - Precision High-Speed JFET Op Amp | Analog Devices
LT1055S8

LT1055S8 - Precision High-Speed JFET Op Amp | Analog Devices

The Analog Devices LT1055S8 is a precision, high-speed JFET-input operational amplifier with one amplifier circuit in an 8-pin SOIC package. The device is specified for low offset voltage, low input bias current, high slew rate, and high gain-bandwidth product, making it suitable for instrumentation, buffering, signal conditioning, and low-level analog measurement systems. According to the Analog Devices product page, the LT1055/LT1056 family combines a typically 50 µV offset voltage, 1.2 µV/°C drift, 16 V/µs slew rate, and 6.5 MHz gain-bandwidth product, with guaranteed maximum offset voltage of 150 µV. An operational amplifier is an analog signal-processing integrated circuit that uses high-gain differential amplification and feedback to control gain, bandwidth, and output behavior. The LT1055S8 belongs to the JFET-input operational-amplifier family, a subcategory of precision amplifiers used when low input bias current and input capacitance are important. Its JFET input stage is appropriate for sensors, photodiodes, high-impedance transducers, and precision feedback networks where input bias current can create measurement errors. Key specifications include a guaranteed offset voltage of 150 µV maximum, guaranteed drift of 4 µV/°C maximum, and guaranteed bias-current limits of 150 pA at 70°C and 2.5 nA at 125°C. The LT1055 family is also specified for 16 V/µs slew rate and 6.5 MHz gain-bandwidth product in the manufacturer product information. The SOIC-8 format supports conventional surface-mount assembly and is compatible with standard op-amp layouts when pin functions and supply requirements are confirmed. Typical uses include precision instrumentation, low-level sensor interfaces, analog signal conditioning, active filters, sample-and-hold stages, and high-impedance buffer circuits. The device can also serve in test and measurement equipment where low offset and drift help preserve signal accuracy. Its high speed and low bias current provide useful flexibility when the signal source has high source impedance or when the application requires both DC precision and reasonable dynamic response. The principal design consideration is verifying the exact pinout, supply voltage, output swing, input common-mode range, and stability requirements against the manufacturer datasheet before layout. A precision op-amp does not remove the need for suitable decoupling, clean grounding, feedback-component selection, and output-load compatibility. This page combines the verified manufacturer and distributor information with practical guidance for evaluating the LT1055S8 against same-package alternatives.

RFQ Contact
LT1056ACH - 6.5MHz, 16V/µs JFET Op Amp | Analog Devices
LT1056ACH

LT1056ACH - 6.5MHz, 16V/µs JFET Op Amp | Analog Devices

The Analog Devices LT1056ACH is a precision, high-speed JFET-input operational amplifier featuring a 6.5 MHz gain-bandwidth product, a 16 V/µs slew rate, and typically 50 µV offset voltage. The LT1056ACH is packaged in an 8-pin TO-5 metal-can package. Its combination of low offset, low drift, and very low input bias current makes it suitable for precision signal-conditioning and measurement systems that also require wideband transient response. A JFET-input operational amplifier is an analog amplifier whose differential input stage uses junction field-effect transistors. The JFET input architecture provides very low input bias current while preserving the low-noise, high-input-impedance behavior required by sensors, transducers, and laboratory instrumentation. Within the broader semiconductor hierarchy, the LT1056ACH belongs to the operational-amplifier family within amplifier and signal-conditioning integrated circuits. The LT1056ACH combines a guaranteed maximum offset voltage of 150 µV with typical offset voltage of 50 µV. Its typical input offset drift is 1.2 µV/°C, while the guaranteed maximum drift is 4 µV/°C. Typical input bias current is 40 pA at 70°C and 500 pA at 125°C. These characteristics reduce dc error in high-impedance instrumentation and help preserve signal fidelity when source impedance creates meaningful input offset voltage. The simultaneous availability of 16 V/µs slew rate and 6.5 MHz gain-bandwidth product distinguishes the LT1056 family from slower precision amplifiers. Large-signal slewing improves recovery from overload and supports small-signal bandwidth in feedback configurations. The offset and drift specifications complement that speed, creating an amplifier suitable for laboratory buffers, precision current-to-voltage converters, active filters, and low-level sensor interfaces. Typical uses include photodiode and other photodetector preamplifiers, precision bridge instrumentation, low-level signal buffers, waveform amplifiers, and active analog filters. In each circuit, the low input bias current limits dc loading, while the 16 V/µs slew rate helps preserve the shape of rapidly changing signals. Designers should still verify input and output voltage limits, gain-bandwidth behavior, load stability, and supply requirements for the intended configuration. A primary design consideration is feedback stability. High-speed amplifiers can require source, load, and compensation choices that differ from general-purpose precision op amps. Keep input and feedback routing short, use the manufacturer-recommended application topology, and evaluate output loading before increasing gain. The metal-can package also requires adequate clearance from conductive structures and proper handling to avoid mechanical damage. This page consolidates manufacturer specifications, lifecycle information, sourcing guidance, replacement constraints, and application-focused design notes for engineers evaluating the LT1056ACH. It distinguishes verified drop-in candidates from merely similar amplifiers and emphasizes the combination of precision input behavior, 6.5 MHz bandwidth, and 16 V/µs slew rate that defines the device.

RFQ Contact
LT1056CH - 16 V/us Precision JFET Op Amp | Analog Devices
LT1056CH

LT1056CH - 16 V/us Precision JFET Op Amp | Analog Devices

Analog Devices LT1056CH is a precision, high-speed JFET-input operational amplifier with 16 V/us slew rate, 6.5 MHz gain-bandwidth product, 150 uV maximum offset voltage, and typically 50 uV offset in an 8-pin TO-5 package. The device combines precision specifications with high-speed performance for instrumentation, signal conditioning, and low-distortion analog systems. A JFET-input operational amplifier is a voltage-amplifier integrated circuit whose field-effect input stage provides very low bias current. This LT1056CH family member is designed for applications requiring accurate DC offset behavior, low input bias current, wide bandwidth, and rapid large-signal response. Its position in the hierarchy is precision operational amplifier > general-purpose operational amplifier > analog signal-conditioning IC > semiconductor. Key features include a 16 V/us slew rate and 6.5 MHz gain-bandwidth product, allowing the amplifier to process signals with significant amplitude and bandwidth simultaneously. The typical input offset voltage is 50 uV, while the guaranteed maximum is 150 uV. Typical offset drift is 1.2 uV/degree C. Input bias current is typically 40 pA at 70 degrees C and 500 pA at 125 degrees C, making the device appropriate for high-impedance sensing stages. The LT1056 and LT1055 share the same JFET-input architecture, but designers should confirm offset, drift, bias-current, and package details for each ordering code. The verified manufacturer description specifically states that the LT1055/LT1056 combination combines precision specifications with 16 V/us slew rate and 6.5 MHz gain-bandwidth product. This performance is useful when slew-rate limiting, rather than small-signal bandwidth, would dominate amplifier behavior. Typical uses include precision instrumentation, low-level signal conditioning, active filters, data-acquisition front ends, and buffered sensor interfaces. The JFET input stage is especially useful where source impedance is high and the signal source cannot supply substantial bias current. The amplifier should be configured with suitable feedback, power-supply decoupling, and output-stage load consideration to retain low distortion and stable operation. Designers should account for input and output voltage headroom, verify the exact pin configuration and lead arrangement for the 8-pin TO-5 package, and inspect the manufacturer datasheet before layout release. The CH ordering code is associated with the commercial temperature grade and wire-lead TO-5 format. Do not assume that a modern surface-mount successor has the same footprint or pinout without an explicit manufacturer or distributor cross-reference. This page consolidates the verified manufacturer specifications, distributor identification, package details, pricing availability, and qualified drop-in information for the LT1056CH. It also distinguishes measured or guaranteed electrical characteristics from data that remains unavailable in the supplied sources, helping engineers make sourcing and design decisions without relying on unverified substitutions.

RFQ Contact
LT1057CH - Dual Precision JFET Op Amp | Analog Devices
LT1057CH

LT1057CH - Dual Precision JFET Op Amp | Analog Devices

The Analog Devices LT1057CH is a matched dual JFET-input precision operational amplifier in an 8-pin TO-5 package. It combines a 5 MHz gain-bandwidth product, a minimum slew rate of 10 V/us, and fast 0.02% settling performance for precision analog signal paths. The LT1057CH is designed for applications requiring low-noise JFET inputs, low offset voltage, high speed, and accurate behavior in feedback configurations. A JFET-input operational amplifier is a voltage-amplifier IC whose input stage uses junction field-effect transistors. The JFET input architecture supports very low input bias current and high input impedance, making it useful when measuring signals from high-impedance sources. Within the amplifier hierarchy, the LT1057CH belongs to the dual operational-amplifier category, combines precision and high-speed performance, and is ultimately an analog integrated circuit used for signal conditioning, feedback control, and signal amplification. Key features include a 5 MHz gain-bandwidth product, a guaranteed minimum slew rate of 10 V/us, and fast settling to 0.02%. The LT1057 offset-voltage specification is 150 uV maximum, while the associated LT1057 input bias current specification is 450 uV maximum as listed in the family datasheet. Its matched dual construction is intended to provide consistent performance between the two amplifier channels when both sections operate in similar circuits. The combination of precision offset and high bandwidth allows the LT1057CH to serve in instrumentation, buffer, and feedback-control circuits where either conventional bipolar input amplifiers or slower JFET amplifiers may limit system performance. The manufacturer identifies the device as an upgrade for systems using LF412A and OP-215 JFET-input dual amplifiers, while retaining the industry-standard 8-pin configuration. This makes it relevant to both new precision designs and carefully reviewed legacy upgrades. Typical applications include low-level signal conditioning, active filters, instrumentation amplifiers, sample-and-hold systems, and precision feedback loops. The dual format can also reduce board area by placing two matched amplifier sections in one package. In systems requiring differential drive or symmetrical signal paths, channel matching is valuable, although exact matching values should be taken from the manufacturer specifications for the selected grade. When designing around the LT1057CH, verify the complete pin configuration, supply limits, common-mode range, output swing, offset trim, and stability requirements against the manufacturer datasheet. Decoupling should be placed close to the supply pins, and feedback components should be arranged to minimize parasitic capacitance around the high-bandwidth amplifier inputs. This product page combines the official LT1057 family specifications with package-specific identification, drop-in replacement guidance, comparison criteria, and practical application notes. These engineering details help distinguish a true pin-compatible replacement from a merely similar precision amplifier and support faster component selection for high-impedance, precision, and feedback-sensitive circuits.

RFQ Contact
LT1057CJ8 - Dual JFET Precision High-Speed Op Amp | Analog Devices
LT1057CJ8

LT1057CJ8 - Dual JFET Precision High-Speed Op Amp | Analog Devices

The Analog Devices LT1057CJ8 is a matched dual JFET-input operational amplifier in an 8-pin ceramic-DIP package, combining a minimum 14 V/µs slew rate, a minimum 5 MHz gain-bandwidth product, and fast settling to 0.02%. The LT1057 uses the industry-standard 8-pin dual-amplifier configuration and is positioned as a precision, high-speed JFET-input alternative to established bipolar and JFET-input dual op amps. Its ceramic-DIP construction supports applications requiring a through-hole package. An operational amplifier is an analog signal-conditioning integrated circuit that amplifies the voltage difference between its two inputs while providing high open-loop gain and low output impedance. The JFET-input topology places the LT1057 in the amplifier hierarchy as a precision analog IC with high input impedance and low input bias current. This makes it particularly useful when a low-level sensor or instrumentation signal must be amplified without loading its source. The LT1057's principal performance features include a typical slew rate of 14 V/µs, a guaranteed minimum of 10 V/µs, a minimum 5 MHz gain-bandwidth product, and fast settling to within 0.02%. Its maximum offset voltage is 450 µV for the LT1057, compared with 180 µV for the closely related LT1058 in the same dual-and-quad JFET-input family. These specifications support accurate, high-frequency signal amplification when component selection and layout are guided by the manufacturer datasheet. Architecturally, the LT1057 is a matched dual amplifier, meaning that its two channels are designed for closely matched performance. JFET input devices are valued for high input impedance and low input bias current, while the high gain-bandwidth product supports wider closed-loop bandwidth than a conventional precision-only amplifier. The 8-pin configuration supports common industry-standard dual-op-amp layouts and reduces the need for a custom footprint when the exact package matches. Typical uses include low-level instrumentation, precision signal conditioning, audio and communications circuitry, active filters, and general-purpose high-speed analog amplification. It is also appropriate for laboratory and industrial signal-chain designs that benefit from matched dual channels, such as differential amplifiers, balanced input stages, and dual-channel filters. Package choice, supply voltage, input common-mode range, output swing, and stability requirements must be checked against the datasheet for the selected grade and temperature range. When laying out an LT1057CJ8 circuit, use a solid ground plane, minimize input-node capacitance, and place input and feedback components close to the associated amplifier pins. Because high-speed devices can amplify unintended feedback paths, keep output and input routing separate and observe the documented compensation recommendations for the required closed-loop gain. Through-hole ceramic-DIP construction is useful for prototyping and legacy-compatible industrial assemblies, but it occupies more board area than a surface-mount dual op amp. This product page combines the manufacturer's functional description with package identification, key speed, bandwidth, settling, and offset specifications, practical design guidance, and qualified cross-reference options. It also distinguishes the dual LT1057 from the related quad LT1058 and evaluates the manufacturer's identified upgrades over LF412A and OP-215 dual JFET-input amplifier designs.

RFQ Contact
LT1057ISW - Dual 14V/us Precision JFET Op Amp | Analog Devices
LT1057ISW

LT1057ISW - Dual 14V/us Precision JFET Op Amp | Analog Devices

The Analog Devices LT1057ISW is a matched dual JFET-input precision operational amplifier with a typical slew rate of 14 V/us, a minimum gain-bandwidth product of 5 MHz, and low input bias current of 10 pA, housed in an 8-pin SOIC package. The matched dual architecture provides two amplifiers with closely matched characteristics for instrumentation, precision signal processing, and high-speed analog control. A JFET-input operational amplifier is a voltage-amplifier IC whose input stage uses junction field-effect transistors. This input architecture is valued for high input impedance, very low bias current, and low input-current noise. Within the broader semiconductor hierarchy, the LT1057 is an operational amplifier, a precision analog amplifier, and a linear integrated circuit intended for signal conditioning rather than power conversion. The LT1057 combines a 14 V/us typical slew rate with a minimum 5 MHz gain-bandwidth product. Its fast settling performance reaches 0.02%, making it useful where signal transitions must settle accurately at relatively high operating frequencies. The typical input offset voltage is 150 uV, with a maximum of 450 uV for the LT1057, while the low 10 pA bias current supports high-impedance sensing and minimizes current-dependent errors. The matched dual configuration supports precision applications requiring two amplifier channels with similar behavior. It can serve as a dual noninverting amplifier, dual difference amplifier, instrumentation front end, sample-and-hold buffer, or active-filter building block. The 8-pin configuration supports common industry-standard dual-op-amp layouts, reducing design changes when moving from older bipolar or JFET-input dual amplifiers to the LT1057 family. Typical uses include precision instrumentation, low-level signal conditioning, high-impedance sensor interfaces, active filters, and analog measurement systems. The low bias current is especially beneficial when source impedances are high, while the 14 V/us typical slew rate helps preserve signal integrity when driving moderate capacitances or processing faster waveforms. When laying out a circuit, place input and feedback components close to the relevant amplifier pins and keep sensitive input traces away from high-current switching paths. Provide stable bypassing at the power pins, verify output-current and supply-voltage limits against the manufacturer specifications, and check stability when driving capacitive loads. This product page combines the LT1057 family specifications, manufacturer documentation, package information, cross-reference candidates, and practical guidance for evaluating the LT1057ISW in precision analog systems.

RFQ Contact
LT1057SW - Dual Precision JFET Op Amp | Analog Devices
LT1057SW

LT1057SW - Dual Precision JFET Op Amp | Analog Devices

Analog Devices LT1057SW is a dual, matched JFET-input precision operational amplifier in a 16-lead SOIC package. The device combines a minimum 5 MHz gain-bandwidth product with a minimum 10 V/µs slew rate, while the manufacturer identifies 13 V/µs as the typical LT1057SW slew rate. Its input architecture supports low-bias-current instrumentation and its precision characteristics target high-accuracy signal-conditioning applications where both speed and low offset are important. A JFET-input operational amplifier is an analog signal-conditioning IC that uses junction-field-effect-transistor input devices to provide very low input bias current. This places the LT1057SW in the amplifier hierarchy of JFET amplifier, operational amplifier, analog IC, and semiconductor. Unlike a bipolar-input amplifier, a JFET input stage can combine low bias current with high input impedance, making the device useful when measuring signals from high-impedance sources. According to the Analog Devices product page and LT1057/LT1058 datasheet, the LT1057 is a matched dual amplifier designed to replace popular bipolar and JFET-input dual op amps. The manufacturer specifically identifies upgrades for systems using the LF412A and OP-215. Clear electrical benefits include a 5 MHz minimum gain-bandwidth product, a 10 V/µs minimum slew rate, and a typical 13 V/µs slew rate in the LT1057SW ordering information. The dual configuration provides two amplifiers in one package, reducing board area compared with two separate single amplifiers. A reported common-mode rejection figure of 96 dB helps suppress differential input offsets and common-mode disturbances. The SW ordering option is associated with a 16-lead SO package and a specified 0°C to 70°C operating-temperature range; higher-temperature and packaging options should be confirmed by part suffix before substitution. Typical applications include precision signal conditioning, low-frequency instrumentation, active filtering, data acquisition, current-to-voltage conversion, and buffered sensor interfaces. The LT1057SW is particularly appropriate when a source presents high impedance and the input stage must minimize bias-current error while preserving useful slew rate and bandwidth. Layout should keep sensitive input nodes short, provide a solid ground reference, and place input and feedback components close to the relevant amplifier pins. Confirm the required supply voltage, output-swing limits, input-common-mode range, unity-gain stability, and exact lead assignments in the manufacturer datasheet before finalizing a new layout. This page organizes the manufacturer specifications, sourcing guidance, qualified drop-in analysis, application guidance, and design checks for engineers evaluating the LT1057SW. It also separates confirmed technical facts from parameters that require schematic-level verification, helping accelerate component selection without replacing careful datasheet review.

RFQ Contact
LT1058CJ - Quad 14V/us JFET Op Amp | Analog Devices
LT1058CJ

LT1058CJ - Quad 14V/us JFET Op Amp | Analog Devices

The Analog Devices LT1058CJ is a four-circuit precision high-speed operational amplifier with JFET inputs, a 14 V/us slew rate, a 5 MHz gain-bandwidth product, and a 14-pin CERDIP package. The LT1058CJ combines four independent amplifiers with low input bias current and precision offset characteristics, making it suitable for instrumentation, signal conditioning, and analog measurement systems. A JFET-input operational amplifier is a voltage-amplifier IC whose input stage uses junction field-effect transistors. This input architecture provides very low bias current, high input impedance, and effective operation with high-impedance sensors. Within the amplifier hierarchy, the LT1058CJ belongs to the precision operational-amplifier family and ultimately to the broader analog signal-processing and semiconductor categories. Key characteristics include 14 V/us minimum slew rate, 10 V/us minimum slew rate in one operating specification, a 5 MHz minimum gain-bandwidth product, and a fast settling specification of 0.02%. The LT1058 version has a maximum offset voltage of 600 uV. Input bias current is specified at 7 pA, supporting high-impedance sources whose leakage currents could otherwise create significant input-voltage errors. The four-amplifier configuration reduces the number of packages required for multi-channel analog systems. Four amplifiers in one 14-pin ceramic dual-inline package simplify board layout while supporting per-channel configuration as filters, buffers, gain stages, or instrumentation amplifiers. The precision JFET input stage makes the device especially useful where source impedance, bias-current error, and signal fidelity are more important than minimum cost or smallest area. Typical applications include low-level sensor signal conditioning, laboratory instrumentation, audio preamplification, active filtering, data-acquisition front ends, and precision current-voltage conversion. In a sensor interface, the amplifier can provide high input impedance without drawing significant current from the sensor. In an instrumentation chain, its low bias current helps preserve the integrity of small signals while its 14 V/us slew rate supports faster waveform transitions. Design with the input common-mode range, output swing, supply voltage, and stability requirements in mind. Ceramic decoupling should be placed close to the supply pins, and unused amplifier channels should be configured according to the manufacturer’s recommended stable topology. The ceramic package provides a temperature grade suitable for demanding industrial and military applications, subject to the complete ordering information. This page combines the LT1058CJ’s principal electrical and packaging characteristics with application guidance, engineering notes, and cross-reference analysis. It focuses on design-relevant distinctions such as input bias current, slew rate, gain-bandwidth product, channel count, and the practical limitations of replacement packages.

RFQ Contact
LT1058CN - 4-Channel 5MHz JFET Op Amp | Analog Devices
LT1058CN

LT1058CN - 4-Channel 5MHz JFET Op Amp | Analog Devices

Analog Devices LT1058CN is a four-channel JFET-input precision operational amplifier with a 5 MHz gain-bandwidth product, 13 V/us slew rate, and 600 uV maximum offset voltage in a 14-pin PDIP package. The device is designed for precision signal processing applications that require low input bias current, high slew rate, fast settling, and multiple amplifiers on a single package. An operational amplifier is an analog building block that amplifies the voltage difference between its inverting and non-inverting inputs. The LT1058 belongs to the precision operational-amplifier hierarchy and uses JFET input transistors to provide low input bias current. Four independent amplifiers in one PDIP package can reduce component count and simplify board layout in instrumentation, signal-conditioning, test, measurement, and control systems. The principal performance figures include a 5 MHz gain-bandwidth product, 13 V/us slew rate, and 600 uV maximum input offset voltage for the LT1058. Its four-channel organization supports parallel amplification of related or independent signals. The JFET input stage is particularly useful when the source impedance is high, because low input bias current reduces the voltage error generated as current flows through that impedance. The LT1058 is part of the LT1057/LT1058 family of dual and quad JFET-input precision high-speed operational amplifiers. The official family datasheet identifies a minimum 10 V/us slew rate and a minimum 5 MHz gain-bandwidth product for the family, while distributor data for the LT1058 identifies 13 V/us slew rate. The verified comparison data also identifies operation from negative 20 V to positive 20 V, a 1.7 mA listed supply current, and a 14-pin PDIP package. Typical uses include precision signal conditioning, laboratory measurement, analog instrumentation, process-control circuits, active filtering, and low-frequency data-acquisition channels. In high-impedance systems, the JFET inputs help preserve signal fidelity by minimizing bias-current-induced errors. For broadband or high-amplitude applications, the 13 V/us slew rate provides a useful speed margin, while the 5 MHz gain-bandwidth product limits closed-loop bandwidth according to the selected feedback topology and noise-gain setting. Designers should verify the complete input and output voltage ranges against the selected supply voltage, including the effects of input common-mode range, output swing, and load current. Decoupling capacitors should be placed close to the supply pins, and unused amplifier channels should be configured according to the manufacturer's guidance rather than left with floating inputs. The broad 14-pin PDIP footprint is mechanically straightforward but occupies more board area than a modern surface-mount quad op amp. This page combines the verified LT1058 family specifications, distributor identification, package data, practical application guidance, and a conservative review of available drop-in alternatives. It distinguishes verified parameters from information that must be checked in the manufacturer datasheet before production release.

RFQ Contact
LT1058ISW - Quad JFET High-Speed Op Amp | Analog Devices
LT1058ISW

LT1058ISW - Quad JFET High-Speed Op Amp | Analog Devices

Analog Devices LT1058ISW is a quad JFET-input precision high-speed operational amplifier packaged in a 16-pin small-outline package. The device combines four amplifiers in one package, allowing it to replace four discrete single JFET-input amplifiers while reducing board area, interconnect count, and repeated support-component requirements. Its stated 5 MHz feature identifies it as a high-speed amplifier within the LT1057/LT1058 precision JFET family. A JFET-input operational amplifier is an analog amplifier whose input stage uses junction field-effect transistors. This input architecture is valued for high input impedance, low input bias current, and effective operation with high-impedance signal sources. In the broader device hierarchy, the LT1058ISW belongs to operational amplifiers, which are amplifier ICs used for voltage amplification, buffering, filtering, instrumentation, and signal conditioning. The quad configuration consolidates four amplifiers without requiring four separate packages. The family is specifically described as providing JFET input, precision, and high-speed performance. These characteristics make it relevant to instrumentation, precision signal conditioning, data acquisition, and communications analog front ends. Quad integration is especially useful when several channels require similar electrical behavior, such as four sensor channels, dual-ended differential stages, or a combination of filters and buffers. Its 16-pin small-outline package supports surface-mount assembly while retaining a conventional analog IC footprint. The LT1058 family shares a manufacturer datasheet with the LT1057, which is a matched JFET-input dual operational amplifier. The manufacturer describes the LT1057 as a precision, high-speed device in an 8-pin configuration, while the LT1058 provides the quad version. This relationship helps explain the family positioning: engineers can select the dual or quad configuration according to channel count, while retaining a consistent precision JFET-input design approach. Typical uses include precision measurement front ends, low-leakage sensor interfaces, analog signal conditioning, instrumentation, and communications circuits requiring multiple high-impedance inputs. Because the LT1058ISW contains four amplifiers, designers can use it for balanced differential stages where matched channel behavior simplifies common-mode and differential-signal handling. It can also serve as a quad buffer when source impedance is high and the driven load is relatively light. The primary design consideration is to verify every electrical limit, common-mode range, stability requirement, compensation choice, and power-supply condition against the LT1057/LT1058 manufacturer datasheet before layout. The four amplifiers share a package and power rails, so power budgeting, thermal rise, and bypass-capacitor placement should be evaluated for the complete device rather than as isolated channels. Stable operation also depends on the selected feedback network and output-load conditions. This product page consolidates family identification, package information, commercial sourcing instructions, application guidance, and replacement-selection criteria. Its engineering value is the separation between confirmed device characteristics and parameters that must be confirmed in the manufacturer datasheet, helping engineers plan an LT1058ISW-based design without relying on assumptions about input bias current, offset voltage, noise, slew rate, common-mode range, or supply-current limits.

RFQ Contact
LT1077CJ8 - Micropower Precision Op Amp | Analog Devices
LT1077CJ8

LT1077CJ8 - Micropower Precision Op Amp | Analog Devices

The Analog Devices LT1077CJ8 is a micropower precision operational amplifier optimized for 5 V single-supply operation, with additional specifications provided for ±15 V operation. The device is a one-amplifier, 8-pin CERDIP offering a direct replacement path for precision amplifiers such as the OP-07, OP-77, AD707, and LT1001. According to the Analog Devices LT1077 datasheet, the LT1077 reduces supply current by 30 to 60 times compared with those precision amplifiers while retaining externally adjustable offset-voltage nulling. An operational amplifier is an analog signal-processing IC that compares voltages applied to its inverting and non-inverting inputs and amplifies the difference between them. Precision operational amplifiers form part of the broader amplifier IC hierarchy and are commonly used in instrumentation, measurement, control, and sensor-conditioning circuits. The LT1077 specifically emphasizes low power consumption while retaining precision-oriented operation, making it useful where conventional precision amplifiers would consume too much supply current. The LT1077's principal features include micropower operation, precision-amplifier architecture, compatibility with single 5 V supply conditions, specified operation under ±15 V conditions, and support for external offset-voltage nulling. The manufacturer identifies direct-replacement compatibility with the OP-07, OP-77, AD707, and LT1001, with supply-current reductions of 30 to 60 times. It is also a direct plug-in replacement for the LT1012 and OP-97, with approximately 10 times lower dissipation. The technical compromise of this micropower design is important. The Analog Devices LT1077 datasheet states that competing micropower devices can seriously degrade precision, noise, speed, and output-drive specifications. Designers should therefore evaluate those parameters against the actual signal bandwidth, required noise performance, and load capability of the target circuit rather than selecting the amplifier solely from its low supply-current rating. The external nulling connection preserves compatibility with circuits using potentiometer-based offset adjustment. Typical applications include battery-powered instrumentation, low-power sensor interfaces, portable measurement equipment, precision current-voltage conversion, and analog signal-conditioning stages that operate from a 5 V supply. In these systems, reduced supply current can extend operating time and reduce heat generation. The part can also be used where a previously installed OP-07-family circuit requires a lower-power replacement while retaining the established external offset-nulling arrangement. PCB design should preserve the manufacturer's recommended bypassing arrangement and keep sensitive input and offset-null connections away from high-current switching paths. Because this is a ceramic dual-inline package, insertion and removal require care to avoid mechanical stress. Before substituting it into an existing design, confirm that the replacement amplifier's operating region, supply polarity, nulling method, and required stability behavior match the original circuit. This page combines manufacturer-identified replacement relationships, package information, sourcing guidance, and practical migration considerations. It highlights where the LT1077CJ8 provides measurable supply-current or dissipation reductions and where precision, noise, speed, and output-drive requirements must be checked before it is used as a drop-in substitute.

RFQ Contact
LT1078ACH - Micropower Dual Precision Op Amp | Analog Devices
LT1078ACH

LT1078ACH - Micropower Dual Precision Op Amp | Analog Devices

Analog Devices LT1078ACH is a micropower, dual, precision operational amplifier optimized for single-supply operation at 5 V, with the LT1078ACH supplied in an 8-pin TO-5 metal-can package. The device provides two amplifiers, a maximum supply current of 50 µA per amplifier, and operation from a single 5 V rail, while also supporting ±15 V applications. An operational amplifier is a high-gain, analog signal-conditioning device used in amplification, filtering, comparison, buffering, and feedback-control circuits. Within the electronic-component hierarchy, the LT1078ACH is a dual precision op amp, meaning that one package contains two amplifiers that can perform independent signal-processing tasks. Its micropower operating class makes it suitable for battery-powered instrumentation and low-current analog systems where supply efficiency is more important than high-bandwidth performance. The principal features of the LT1078ACH include dual-amplifier integration, micropower operation, single-supply optimization at 5 V, and support for ±15 V supplies. The 50 µA maximum supply current per amplifier is particularly important in portable designs because each active amplifier contributes to the circuit's continuous load. The TO-5 metal-can package also provides a mechanically robust enclosure for legacy and industrial instrumentation. The precision architecture of the LT1078ACH is intended to minimize error in closed-loop analog systems. As a dual amplifier, it can implement two related functions in one package, such as an instrumentation front-end and a buffer, or a filter stage and an output driver. Operating from a single 5 V supply simplifies battery-powered designs, while the ±15 V capability accommodates conventional industrial analog systems. Designers should still account for input common-mode limits, output swing, bias-current effects, and stability requirements when selecting external compensation and resistors. Typical uses include low-power sensor signal conditioning, precision filtering, battery-operated measurement instruments, low-current transducers, and dual-stage analog signal chains. The device is also appropriate where two matched amplifier functions reduce board area and component count. Because it is a micropower precision amplifier rather than a high-speed amplifier, applications requiring wide bandwidth, high slew rate, or high output-current capability may benefit from a different device family. For layout, keep input, feedback, compensation, and decoupling paths short to reduce noise pickup and parasitic feedback. Use a local bypass capacitor at the supply pins and confirm common-mode and output-swing limits against the actual signal range. Start-up behavior, input bias current, and output loading must be checked with the system power source rather than assumed to match a generic dual op amp.

RFQ Contact
LT1078IS8 - Micropower Dual Precision Op Amp | Analog Devices
LT1078IS8

LT1078IS8 - Micropower Dual Precision Op Amp | Analog Devices

Analog Devices LT1078IS8 is a micropower dual operational amplifier optimized for single-supply operation at 5 V and offered in an 8-pin small-outline surface-mount package. The device provides two amplifier circuits, bipolar construction, a maximum offset voltage of 600 uV, and approximately 200 kHz gain-bandwidth performance. These characteristics place the LT1078IS8 in the precision operational-amplifier category for low-power analog signal conditioning. An operational amplifier is a high-gain, low-impedance differential amplifier used to amplify small signals. The micropower subset trades bandwidth and drive capability for lower supply consumption, making it appropriate for portable instrumentation, low-power sensor interfaces, and battery-operated measurement systems. In the broader IC hierarchy, the LT1078IS8 is an amplifier IC, an analog integrated circuit, and a semiconductor designed around precision feedback and common-mode rejection. The LT1078IS8 uses two amplifier sections in one 8-pin package, allowing compact designs that need two signal-processing channels. Its 5 V single-supply optimization is important for systems powered from a regulated 5 V rail. The 600 uV maximum input offset voltage supports accurate DC amplification, while the 200 kHz gain-bandwidth figure provides useful bandwidth for low-frequency measurement and control paths. The bipolar process supports conventional op-amp input characteristics but requires attention to supply voltage and common-mode input limits. The 8-SO package offers a small footprint for surface-mount assembly while retaining separate inputs and outputs for both channels. Pin assignments and electrical limits should be taken directly from the Analog Devices LT1078 datasheet and the specific ordering code LT1078IS8. The I suffix identifies an industrial-grade ordering option within the LT1078 family, while the S8 portion identifies the 8-pin surface-mount configuration. Exact temperature ratings, supply limits, bias currents, and common-mode ranges require confirmation from the manufacturer documentation. Typical uses include low-level sensor conditioning, precision current measurement, portable test equipment, low-voltage audio and control circuits, and general-purpose battery-powered analog systems. Two integrated amplifier sections can implement independent gain stages, buffers, or differential signal paths. When the two amplifiers operate in related channels, their electrical behavior and layout should be evaluated to minimize offset and temperature-gradient effects. The principal design consideration is the balance between low power and signal bandwidth. The approximately 200 kHz gain-bandwidth specification is adequate for many precision low-frequency tasks but may constrain higher closed-loop gain or faster transient requirements. Decoupling, input bias-current return paths, output loading, and common-mode range should all be checked against the operating rail. Feedback resistors should also be selected with values that do not demand excessive output current. This product record combines the manufacturer’s device description, family-level application context, package identification, and drop-in considerations in one engineering-focused view. It also distinguishes the verified LT1078IS8 ordering code from related lead-free and packaging designations, helping designers evaluate PCB reuse without confusing ordering suffixes with functional differences.

RFQ Contact
LT1079CN - Quad Micropower Precision Op Amp | Analog Devices
LT1079CN

LT1079CN - Quad Micropower Precision Op Amp | Analog Devices

The Analog Devices LT1079CN is a quad micropower precision operational amplifier optimized for single-supply operation at 5 V, with four amplifiers and four 14-pin PDIP devices per package. Its verified operating voltage range is 2.3 V to 12 V, gain-bandwidth product is 200 kHz, slew rate is 0.07 V/µs, and input bias current is 6 nA. The device is supplied in a 14-pin PDIP package for through-hole PCB designs. An operational amplifier is an analog signal-conditioning IC that amplifies the voltage difference between its inverting and non-inverting inputs. A precision operational amplifier adds low offset, low bias current, and controlled gain behavior, while a micropower implementation limits supply consumption for battery-powered and low-power systems. Within the broader hierarchy, the LT1079 is a four-channel amplifier within the precision operational-amplifier and analog signal-conditioning IC categories. The LT1079's four independent amplifiers make it suitable for compact analog designs requiring several signal-conditioning stages. Its 200 kHz gain-bandwidth product supports low-frequency precision amplification, and its 0.07 V/µs slew rate provides a defined large-signal response. The low 6 nA input bias current reduces bias-current errors in high-impedance source interfaces, while single-supply operation simplifies circuits powered from a 5 V rail. The manufacturer describes the LT1079 as a micropower, single-supply precision amplifier suitable for precision filtering, instrumentation, and micropower sample-and-hold circuits. Because the verified product information identifies the operating voltage range as 2.3 V to 12 V, designers can use the device across common low-voltage supply systems. The quad configuration reduces the number of packages required when four gain stages, buffers, or active-filter sections are needed. Typical uses include low-power sensor interfaces, precision active filters, battery-powered measurement systems, audio and communication signal conditioning, and general-purpose 5 V analog circuits. In a sample-and-hold application, the amplifier can buffer the input and support the active input stage. In filters, its four channels can implement multiple buffered stages while maintaining a common supply architecture. Design with the 14-pin PDIP footprint and verify the complete pin assignment against the manufacturer datasheet before layout. Input common-mode range, output swing, offset voltage, supply current, noise, and stability recommendations are not included in the supplied verified excerpts, so they must be confirmed before committing a design to production. This page consolidates verified manufacturer and distributor information, package details, parameter constraints, and application guidance. It also distinguishes confirmed drop-in family options from parameters that still require datasheet verification, providing a practical starting point for sourcing and engineering evaluation.

RFQ Contact
LT1079MJ - Micropower Quad Op Amp | Analog Devices | Industrial
LT1079MJ

LT1079MJ - Micropower Quad Op Amp | Analog Devices | Industrial

Analog Devices LT1079MJ is a micropower, precision, quad operational amplifier optimized for single-supply operation at 5 V. It provides four amplifier circuits in a 14-pin CERDIP package, making it suitable for compact analog signal-conditioning systems that require multiple low-power amplifier channels. The device combines precision-oriented performance with a micropower design and single-supply capability. An operational amplifier is a voltage-controlled differential amplifier whose high open-loop gain enables closed-loop functions such as signal amplification, buffering, summation, subtraction, filtering, and impedance conversion. The quad-amplifier form belongs to the operational-amplifier hierarchy within analog and linear integrated circuits, while the micropower and single-supply characteristics place it specifically in the low-power precision amplifier category. The LT1079MJ's four-circuit architecture reduces component count and board area compared with four separate dual or single amplifier packages. Its 5 V single-supply optimization supports systems in which the signal and output ranges are referenced to a positive supply rather than a split supply. This makes the device relevant to industrial instrumentation, low-voltage sensor interfaces, portable measurement equipment, and other compact analog circuits. Analog Devices describes the LT1079 as a micropower quad operational amplifier for single-supply, precision applications. The verified manufacturer information does not provide the complete electrical limits, offset and drift values, input-bias-current figures, noise-density figures, slew rate, gain-bandwidth product, output-current capability, or absolute maximum ratings, so those values should be confirmed in the manufacturer datasheet before final circuit sign-off. Typical uses include amplifying the outputs of low-level sensors, buffering precision converters, implementing active filters, conditioning strain-gauge or bridge signals, and providing multiple analog channels within battery-powered or space-constrained equipment. The quad configuration is particularly useful when several signals require similar amplification, buffering, or filtering functions. A primary design consideration is the interaction between power-supply voltage, input common-mode range, output swing, input bias current, and stability. Because the verified data establishes optimization for 5 V single-supply operation but does not publish the complete operating envelopes, engineers should verify signal amplitudes, load conditions, and external compensation requirements against the manufacturer datasheet before using the LT1079MJ at other supply voltages. This page consolidates the verified Analog Devices product information, distributor package identification, purchasing data, and practical selection considerations. It also documents the absence of verified drop-in substitutes and separates known device facts from parameters that require confirmation in the original manufacturer datasheet.

RFQ Contact
LT1080CJ - 5V RS232 Dual Driver/Receiver, 18-CERDIP | Linear Technology
LT1080CJ

LT1080CJ - 5V RS232 Dual Driver/Receiver, 18-CERDIP | Linear Technology

The Linear Technology LT1080CJ is an advanced low-power 5V RS232 dual driver/receiver with shutdown, housed in an 18-pin CERDIP package. It operates on a single 5V supply and integrates two RS232 drivers and two RS232 receivers, plus a shutdown mode that reduces supply current and forces the driver outputs to a high-impedance state. According to the manufacturer datasheet, the part supports data rates above 120 kBaud, tolerates ±30V on driver outputs without damage, and requires only 1µF charge-pump capacitors. An RS232 transceiver is a type of line driver/receiver IC that converts TTL/CMOS logic levels (0V to 5V) to RS232 voltage levels (typically ±5V to ±15V) for serial data communication, or vice versa. RS232 transceivers sit hierarchically under interface ICs, then under integrated circuits, in the broader system taxonomy of communication and bus conversion components. They remain widely used in industrial serial ports, point-of-sale terminals, and legacy computer interfaces. Key features include superior CMOS drive capability versus older bipolar parts, three-state driver outputs that go high-impedance when shut down, ±30V overvoltage tolerance on driver outputs, and absolute latchup immunity under all conditions. The integrated charge pump uses small 1µF external capacitors, reducing board area compared to legacy RS232 designs that required 10µF or larger capacitors. The architecture uses an on-chip DC-DC charge pump to generate the ±10V RS232 supplies from a single 5V rail, eliminating the need for a negative supply. The shutdown pin puts the device in a low-current state with driver outputs tri-stated, allowing the part to share a serial bus with other drivers or to power down for energy-sensitive applications. Typical applications include industrial serial communication ports, point-of-sale (POS) terminals, legacy computer peripheral interfaces, embedded system debug consoles, and battery-powered handheld instruments that require a single-supply RS232 link. The shutdown feature is particularly useful in portable and battery-powered designs where quiescent current matters. When designing with the LT1080CJ, ensure the four charge-pump capacitors (typically 1µF) are placed as close to the IC pins as possible, and that the shutdown pin is properly driven (logic low for active, logic high for shutdown). Note that the CERDIP package is through-hole only - for surface-mount designs, the LT1080CN#PBF (PDIP-18) or LT1080CSW#PBF (SO-18) variants should be considered instead. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the LT1080CJ not found in the manufacturer datasheet alone, with cross-references to compatible 18-pin DIP-family RS232 transceivers.

RFQ Contact
LT1101CH - Precision Micropower Instrumentation Amplifier | Analog Devices
LT1101CH

LT1101CH - Precision Micropower Instrumentation Amplifier | Analog Devices

Analog Devices LT1101CH is a precision, micropower, single-supply instrumentation amplifier with fixed gain of 10 or 100, supplied in an 8-terminal round TO-5 package. The device is characterized for operation from a single 5 V supply, a single lithium cell, two Ni-Cad batteries, and dual ±15 V supplies. Its instrumentation-amplifier architecture combines differential input measurement with internally established fixed gain, reducing the need for external gain-setting components. An instrumentation amplifier is a specialized amplifier category optimized for measuring small differential signals while rejecting common-mode voltage. The LT1101CH belongs to the broader precision-amplifier hierarchy, combining low power consumption with fixed-gain operation. This makes it useful where a sensor output must be amplified and measured accurately without adding a separate precision gain stage. The LT1101CH provides fixed gains of 10 and 100, allowing designers to match amplification to the input-signal range. Its micropower operating characteristics are particularly valuable in portable instrumentation powered from a single 5 V supply or battery source. Operation from dual ±15 V supplies also supports higher-level laboratory and industrial signal chains. The manufacturer specifies the device for both single- and dual-supply conditions, enabling one amplifier family to cover different measurement environments. The LT1101 architecture is intended for differential signal conditioning, where common-mode rejection and stable closed-loop gain help preserve measurement accuracy. Fixed gain reduces external resistor-network sensitivity and simplifies calibration, although the LT1101CH does not offer the user-adjustable gain flexibility of general-purpose three-op-amp instrumentation amplifiers. Circuit design must therefore account for the fixed gain and the manufacturer’s recommended input, output, and supply-bypass connections. Typical applications include battery-powered sensor interfaces, biomedical instrumentation, industrial process measurement, portable test equipment, and low-level bridge or transducer signal amplification. A single-supply implementation is particularly suitable for compact instruments that cannot accommodate negative rails. The device can also serve in higher-voltage laboratory systems operated from ±15 V supplies when the common-mode and output ranges remain within the specified limits. When selecting a PCB footprint, verify the physical lead arrangement against the manufacturer’s TO-5 pin configuration because the 8-terminal package is not interchangeable with standard 3-lead TO-92 devices. Input shielding, short analog traces, stable reference or excitation connections, and local supply decoupling help preserve the benefit of a precision fixed-gain amplifier. The input common-mode range and output-swing limits must be checked against the actual sensor and supply voltages. This product page combines the manufacturer’s supply and gain information with practical guidance on signal conditioning, footprint selection, power architecture, and replacement sourcing. It also distinguishes the LT1101CH from other fixed-gain and adjustable-gain instrumentation amplifiers so engineers can choose a part that matches the required package, gain, supply voltage, and measurement precision.

RFQ Contact
LT1101CJ8 - Precision Micropower Instrumentation Amplifier | ADI
LT1101CJ8

LT1101CJ8 - Precision Micropower Instrumentation Amplifier | ADI

The Analog Devices LT1101CJ8 is a precision, micropower, single-supply instrumentation amplifier with fixed gain options of 10 or 100, supplied in an 8-lead CERDIP package. It supports operation from a single 5V supply as well as dual ±15V supplies, making it suitable for low-power sensor measurement and signal-conditioning circuits. Key characteristics include 82 dB gain, 6 nA input bias current, a 2.2V to 36V total supply range, and low-power operation from one lithium cell or two Ni-Cad batteries. An instrumentation amplifier is a specialized amplifier category designed to amplify small differential signals while rejecting common-mode interference. Its internal topology typically combines an input stage, differential gain stage, and output stage to provide high input impedance, accurate differential gain, and common-mode rejection. The LT1101 extends this hierarchy from instrumentation amplifier to precision analog amplifier, analog signal conditioner, and low-power power-management-aware IC for battery-powered measurement equipment. The fixed-gain architecture eliminates the need for an external gain-setting resistor, which can reduce component count and remove resistor-ratio tolerance from the gain equation. Available fixed gains of 10 and 100 support bridge-sensor, pressure-transducer, and low-level differential-input applications. Its 6 nA input bias current is particularly useful when the source impedance is high, because lower bias current reduces the voltage error generated across the source impedance. The LT1101 is optimized for precision and micropower operation rather than high-bandwidth signal capture. Its 82 dB gain provides approximately 126-fold voltage amplification in the applicable gain configuration, while the single-supply capability simplifies systems that cannot accommodate negative rails. A single lithium cell or two Ni-Cad batteries can power the device, enabling portable measurement systems that must balance signal accuracy against energy consumption. Typical uses include battery-powered strain-gauge and bridge amplifiers, industrial pressure and force measurement, low-current sensor interfaces, portable diagnostic instruments, and precision analog data-acquisition systems. In these applications, the fixed gain reduces calibration variability, while the low bias current helps preserve weak sensor signals. Designers should still verify source-impedance limits, input common-mode range, supply headroom, and settling requirements for the intended gain configuration. For a single 5V design, place the input and output bypass capacitors close to their associated pins and maintain a quiet ground return around the signal path. Because instrumentation-amplifier accuracy depends on differential excitation and common-mode rejection, unequal input impedances and asymmetrical routing should be avoided. Review the manufacturer pin-description table and recommended application circuit before assigning PCB nets or selecting the fixed-gain version. This page consolidates manufacturer specifications, verified source links, drop-in family options, comparison parameters, and practical circuit-placement guidance for engineers evaluating the LT1101CJ8. It also distinguishes documented electrical characteristics from unresolved package, lifecycle, temperature-grade, and pricing details so design decisions can be validated before production release.

RFQ Contact
LT1102ACH - High-Speed JFET Instrumentation Amplifier | ADI
LT1102ACH

LT1102ACH - High-Speed JFET Instrumentation Amplifier | ADI

The Analog Devices LT1102ACH is a high-speed, precision JFET-input instrumentation amplifier with a fixed gain of 10 or 100, 0.01% gain accuracy, and 3 ppm nonlinearity. It is packaged in an 8-pin TO-5 metal-can package for applications requiring low input bias current, low offset voltage, and fast signal settling. An instrumentation amplifier is a differential amplifier optimized for measuring small signals embedded in larger common-mode voltages. Its internal architecture provides differential input, high input impedance, and fixed gain without an external gain-setting resistor. In the component hierarchy, the LT1102ACH belongs to the instrumentation-amplifier and operational-amplifier families within analog and power-management integrated circuits. The LT1102ACH combines less than 10 pA input bias current with a 180 µV input offset voltage. Its input bias currents also do not double for every 10°C temperature increase, helping preserve measurement accuracy across changing operating temperatures. These characteristics make the device useful when a sensor or transducer produces a low-level differential signal and common-mode voltage rejection is essential. Speed is another defining feature. The LT1102 provides improved slew rate, settling time, gain-bandwidth product, and overdrive recovery compared with competitive high-speed instrumentation amplifiers. A 30 V/µs slew rate helps preserve amplitude and phase accuracy in fast transient measurements. Because the gain is fixed, no external resistor network is required, reducing component count and gain-setting variation. Typical applications include precision bridge excitation and readout, high-speed data acquisition, laboratory instrumentation, industrial process measurement, medical sensor interfaces, and low-current photodetection. The JFET inputs are particularly appropriate when source impedance is high or leakage from guarding, cabling, or nearby circuitry could corrupt the measurement. When laying out the LT1102ACH, use short input paths and appropriate guarding because high-impedance inputs are sensitive to leakage and parasitic capacitance. Maintain symmetric routing around the differential inputs, provide clean supply bypassing, and verify settling time against the selected fixed gain. The TO-5 metal package also requires careful consideration of thermal paths in enclosed or elevated-temperature systems. This page consolidates the manufacturer’s stated performance characteristics, package details, application guidance, and drop-in replacement information into an engineering-oriented reference for precision signal-chain design.

RFQ Contact
LT1102CH - 10/100 Gain JFET Instrumentation Amp | Analog Devices
LT1102CH

LT1102CH - 10/100 Gain JFET Instrumentation Amp | Analog Devices

The Analog Devices LT1102CH is a high-speed, precision, JFET-input instrumentation amplifier with fixed gains of 10 or 100, 0.01% gain accuracy and 3 ppm non-linearity, packaged in an 8-lead hermetic TO-5 metal can. An instrumentation amplifier is a differential-input amplifier whose internal gain is set by internal resistor networks rather than by external feedback components. It belongs to the amplifier IC hierarchy, which sits above the general-purpose operational amplifier: while an op-amp needs external resistors, matched networks and careful layout to reject common-mode noise, an instrumentation amplifier integrates the differential pair, gain network and output stage so that high common-mode rejection is achieved with essentially no user gain-setting hardware. The LT1102 family extends that concept into the fast FET-input domain, delivering precision DC accuracy together with wideband dynamic performance in a low-cost, space-saving 8-pin package. Key features include a selectable fixed gain of 10 or 100, gain accuracy of 0.01%, non-linearity of 3 ppm, input offset voltage of 180 microvolts, and input bias plus offset currents below 10 pA. No external gain-setting resistor is required, which removes the resistor-tolerance and drift contribution that normally limits the accuracy of a discrete instrumentation front end. Slew rate, settling time, gain-bandwidth product and overdrive recovery time are all improved relative to competitive high-speed instrumentation amplifiers of the generation. The JFET input stage gives very low input bias current and high input impedance, which is essential when the source is a resistive bridge, a thermocouple, or a high-impedance transducer whose output would otherwise be loaded by the amplifier. Internal precision matching and laser trimming of the gain network are what deliver the 0.01% gain accuracy and 3 ppm non-linearity figures, and the fixed-gain architecture removes the need for a user-supplied external network that would degrade both figures. Typical applications include strain-gauge and load-cell bridge front ends, high-speed current shunt measurement, precision instrumentation for laboratory and test equipment, medical patient-monitoring signal chains, and industrial process-control sensor interfaces where fast settling after a large input step is required. When designing with the LT1102CH, verify that the supply rails stay within the ±9 V to ±20 V operating window and that the input common-mode range and output swing remain valid for the chosen gain. Because the gain is fixed internally, the system designer selects the 10 or 100 gain version at ordering time rather than trimming gain in-circuit; layout should keep the input traces short, guarded and away from switching nodes to preserve the benefit of the low-noise JFET input stage. This page brings together the manufacturer product information, the family-level precision and speed specifications, package and supply details, and engineering guidance on gain selection, layout and drop-in sourcing options that are spread across many separate documents.

RFQ Contact
LT1102CJ8 - 10/100 Gain Precision Amplifier | Analog Devices
LT1102CJ8

LT1102CJ8 - 10/100 Gain Precision Amplifier | Analog Devices

Analog Devices LT1102CJ8 is a precision, high-speed JFET-input instrumentation amplifier with selectable fixed gains of 10 or 100, packaged in an 8-pin ceramic DIP. It is designed for signal-conditioning applications requiring low input bias current, accurate fixed gain, rapid slew rate, and a high gain-bandwidth product. An instrumentation amplifier is a differential-input amplifier optimized for measuring small signals superimposed on larger common-mode voltages. Its internal topology amplifies the difference between two inputs while rejecting shared voltage and noise. The LT1102 belongs to the instrumentation-amplifier hierarchy within the broader amplifier and analog signal-processing categories, and its JFET input stage is suited to high-impedance sources. The device provides gain accuracy of 0.01% and non-linearity of 3 ppm, eliminating the need for an external gain-setting resistor. According to the Analog Devices LT1102 product information, input bias and offset currents are below 10 pA, while offset voltage is approximately 180 µV. A gain-bandwidth product of 3.5 MHz and slew rate of 30 V/µs support accurate response to rapidly changing input signals. The fixed-gain architecture simplifies instrumentation front ends by moving gain selection inside the package. It is particularly useful when a system needs repeatable gain accuracy with minimal external components. Users should still account for input and output bandwidth, common-mode range, output swing, and noise when designing a complete analog signal chain. Typical uses include high-impedance sensor interfaces, bridge-amplifier signal conditioning, biomedical instrumentation, laboratory measurement systems, and industrial acquisition electronics. The JFET inputs are particularly relevant when source leakage or bias-current error would otherwise compromise a precision measurement. Layout should keep sensitive input traces short, provide a stable reference return, and place input compensation or filtering components close to the device. Where the source impedance is high, parasitic capacitance and leakage can create settling errors even when the amplifier itself has a fast slew rate. This page combines the manufacturer specifications, package information, comparison points, and engineering-oriented selection guidance. It also distinguishes confirmed alternatives from unverified cross-reference listings so engineers can assess replacement risk before modifying a PCB.

RFQ Contact
LT1112S8 - Dual Picoamp Op Amp, 750kHz | Analog Devices
LT1112S8

LT1112S8 - Dual Picoamp Op Amp, 750kHz | Analog Devices

The Analog Devices LT1112S8 is a dual, low-power precision operational amplifier with picoamp input bias characteristics, a 750 kHz gain-bandwidth product, and an 8-pin SO package. Verified results identify a 60 µV maximum offset voltage for the prime grade, 0.5 µV/°C maximum offset drift, 250 pA maximum input bias current, 0.3 µVP-P 0.1-to-10 Hz noise, and 400 µA maximum supply current per amplifier. These values make the LT1112 family appropriate for precision current-to-voltage measurement, low-leakage sensor interfaces, instrumentation, and signal-conditioning circuits. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its non-inverting and inverting inputs while using negative feedback to establish closed-loop gain. The dual LT1112 contains two amplifiers in one package. In the broader semiconductor hierarchy, it is an operational amplifier, an analog amplifier IC, and a low-power precision signal-conditioning component designed for accurate signal conditioning rather than high-current power delivery. The verified LT1112 family emphasizes a combination of low cost and precision. Its low bias current reduces measurement error in high-impedance sources, while low input noise supports resolution-sensitive measurements. The 750 kHz gain-bandwidth product is sufficient for many low-frequency precision loops and modest signal-bandwidth requirements. Standard pinout, surface-mount availability, and the low-cost grade are specifically identified in the retrieved LT1112S8 information. The family description states that the LT1112 dual and LT1114 quad amplifiers combine low cost with outstanding precision specifications. The verified S8 package information and standard pinout support use in compact analog circuits. The specified offset voltage and drift are important when measuring small differential signals because input-referred offset can appear directly as measurement error, while drift changes that error with temperature. Typical uses include photodiode and other high-impedance sensor interfaces, precision current-to-voltage conversion, low-level signal amplification, instrumentation, and audio or analog test equipment. The low input bias current is especially useful when source leakage would otherwise disturb the measured node. The 750 kHz bandwidth should be checked against required signal bandwidth and closed-loop stability requirements. When laying out the circuit, use short input traces, clean grounding, and supply bypassing close to the device. Do not infer input common-mode, supply, or absolute maximum limits from the snippets; consult the manufacturer datasheet before final design release. The retrieved distributor result confirms the purchasable leaded, tape-and-reel ordering code LT1112S8#PBF, while the base MPN remains LT1112S8.

RFQ Contact