Products (44,000+)

MAX202ECWE+T - 5V RS-232 Transceiver | Analog Devices
MAX202ECWE+T

MAX202ECWE+T - 5V RS-232 Transceiver | Analog Devices

Analog Devices MAX202ECWE+T is a dual-channel RS-232 transceiver with two drivers and two receivers, a maximum data rate of 120 kbps, integrated charge-pump circuitry for single +5 V operation, and ±15 kV human-body-model ESD protection in a 16-pin wide SOIC package. The device is intended for bidirectional point-to-point RS-232 and V.28 communications. An RS-232 transceiver is an interface IC that converts logic-level digital signals into differential, voltage-level signals suitable for RS-232 links, while converting received RS-232 signals back into logic levels. Within the interface hierarchy, the MAX202E belongs to the RS-232 transceiver class of interface ICs, combining line drivers, line receivers, and an integrated charge pump in one package. Key features include two driver channels, two receiver channels, full-duplex operation, and ±15 kV ESD protection. The integrated charge pump supports operation from a single +5 V supply without external dual-supply generation. Its 120 kbps maximum signaling rate covers conventional RS-232 equipment, industrial serial links, instrumentation, and embedded control systems while providing useful margin above many legacy 960-bit-per-second and 115.2-kbit/s ports. The MAX202E family is designed to meet EIA/TIA-232E and CCITT V.28 requirements. Maxim describes the MAX202E-MAX213E, MAX232E, and MAX241E family as rugged line-driver and receiver products for RS-232 and V.28 communication in harsh environments. Device variants in the family are distinguished by package, temperature grade, and operating feature combinations, so the exact suffix must be checked before replacing an installed part. Typical applications include industrial serial controllers, barcode and point-of-sale equipment, test and measurement instruments, laboratory data-acquisition systems, and service-port interfaces. It is particularly useful where a system needs two protected RS-232 ports but lacks negative supply rails. The 16-pin wide SOIC package also supports conventional surface-mount assembly and compact two-channel interface designs. When laying out the circuit, place the charge-pump capacitors and the interface-side bypass capacitor close to their associated pins. Keep the RS-232 driver outputs away from sensitive receiver inputs, and route the connector-side traces away from clocks, switching supplies, and high-speed digital nets. Confirm the receiver threshold behavior and ensure downstream firmware treats the port as an RS-232, not an RS-485, interface. This product page combines the manufacturer's interface description with practical replacement criteria, application guidance, package details, and a pin-compatible comparison focused on the MAX202ECWE+T. It helps engineers determine whether the device fits a +5 V RS-232 design before beginning board layout or production sourcing.

RFQ Contact
MAX202EESE+ 5V RS-232 Transceiver, 16-SOIC | Analog Devices
MAX202EESE+

MAX202EESE+ 5V RS-232 Transceiver, 16-SOIC | Analog Devices

Analog Devices MAX202EESE+ is a +5 V RS-232 line transceiver with two drivers and two receivers, ±15 kV ESD protection, and operation up to 120 kbps in a 16-pin SOIC package. The MAX202E family converts TTL/CMOS logic levels to EIA/TIA-232 and V.28 signals while integrated charge-pump circuitry supports operation from a single +5 V supply. An RS-232 transceiver is an interface circuit that connects a digital controller or UART to a serial communications link. It belongs to the interface IC hierarchy, where a line transceiver combines a transmitter for outbound data with a receiver for inbound data. The MAX202EESE+ provides the electrical conversion, voltage levels, and ESD protection required between low-voltage digital logic and a ±RS-232 communications port. The device includes two driver channels and two receiver channels, allowing one RS-232 port to support bidirectional serial communication through four signal pins. Its integrated charge pump generates the bipolar voltage levels required by RS-232 without a separate negative supply. The manufacturer specifies EIA/TIA-232E and CCITT V.28 operation at data rates up to 120 kbps when loaded. Electrical robustness is addressed by ±15 kV human-body-model ESD protection on the serial-interface pins. This protection improves tolerance for cable insertion, removal, and electrostatic discharge encountered in industrial equipment. Operating from a single +5 V rail also simplifies power architecture in systems where a negative supply would otherwise be required. Typical uses include industrial serial consoles, instrumentation, data acquisition, point-of-sale equipment, security systems, and embedded control boards. The dual-driver, dual-receiver arrangement is particularly useful for systems that exchange commands and status data over one RS-232 connection while also supporting hardware handshaking signals. PCB design should provide adequate bypass capacitance at the supply pins and route serial traces away from sensitive analog or high-speed digital nodes. Decoupling capacitors must be placed close to the device to minimize supply-current transients during edge transitions. The external connector and cable remain exposed to electrostatic discharge, so board-level grounding and enclosure design should supplement the IC's internal ESD protection. This page combines the manufacturer's electrical capabilities with package-specific comparison data, replacement guidance, and practical PCB implementation notes. It is intended to help engineers identify whether the MAX202EESE+ fits a +5 V RS-232 design and how to evaluate compatible alternatives before committing a board layout.

RFQ Contact
MAX202EESE+T - 120kbps RS-232 Transceiver | Analog Devices
MAX202EESE+T

MAX202EESE+T - 120kbps RS-232 Transceiver | Analog Devices

Analog Devices MAX202EESE+T is a 2/2 full-duplex RS-232 transceiver with two drivers and two receivers, data-rate capability up to 120kbps, and ±15kV ESD HBM protection. It operates from a single +5V supply and is packaged in a 16-pin narrow SOIC. The MAX202 family implements the electrical requirements associated with EIA/TIA-232E and CCITT V.28 communications while incorporating the charge-pump circuitry required to generate bipolar RS-232 levels from one supply rail. An RS-232 transceiver is an interface IC that translates between digital logic levels and the voltage levels used by RS-232 equipment. Within the interface hierarchy, MAX202EESE+T belongs to the RS-232 transceiver family and functions as a physical-layer communications component. The integrated charge pump allows a modern system to communicate with legacy RS-232 peripherals without a separate negative supply, reducing component count and simplifying power-system design. The device provides two transmit channels and two receive channels, allowing two signal directions to be implemented in one package. Its maximum stated data rate of 120kbps supports short-distance point-to-point serial links when used with an EIA/TIA-232E-compliant load. The ±15kV ESD HBM rating is the principal protection specification highlighted for applications where exposed connectors or cables can introduce electrostatic discharge transients. The MAX202 architecture integrates the RS-232 line drivers, receivers, and charge-pump circuitry. Its receivers invert the incoming RS-232 signal so the associated digital interface operates with standard active-low logic conventions. This arrangement is suitable for connecting a controller UART or similar logic block to an RS-232 port while keeping the high-voltage interface function in one compact 16-pin package. Typical applications include industrial serial controllers, point-of-sale equipment, test and measurement instruments, data-acquisition systems, and legacy computer peripherals. The part can also be used in service equipment that must communicate through an existing RS-232 port. For modern USB-to-RS-232 systems, it provides the physical RS-232 layer while a separate interface controller handles USB-to-serial protocol conversion. Designers should follow the manufacturer's recommended charge-pump capacitor values and place them close to the corresponding pins. The narrow SOIC footprint requires careful orientation because the exposed connector ground, supply rails, and charge-pump components determine signal integrity. Confirm the exact lead assignments, recommended operating conditions, and PCB layout directly against the Analog Devices MAX202E datasheet before releasing a layout. This product page organizes the core transceiver specifications, verified sourcing information, application guidance, package details, and same-package replacement candidates into one engineering-focused reference. It also identifies the electrical and lifecycle characteristics that should be checked before adopting MAX202EESE+T in a new RS-232 design.

RFQ Contact
MAX202EEUE+ - 5V 120kbps RS-232 Transceiver | Analog Devices
MAX202EEUE+

MAX202EEUE+ - 5V 120kbps RS-232 Transceiver | Analog Devices

The Analog Devices MAX202EEUE+ is a dual-channel, full-duplex RS-232 transceiver with two drivers and two receivers, a 5 V single-supply operating requirement, data rates up to 120 kbps, and high ±15 kV ESD HBM protection. The device is packaged in a 16-pin TSSOP package designated EUE. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232-compatible levels and converts received RS-232 signals back into logic-level voltages. The MAX202EEUE+ belongs to the RS-232 interface IC hierarchy, where the MAX202E family combines integrated charge-pump circuitry, drivers, and receivers for single-supply operation. Its implementation supports RS-232 and V.28 communications while meeting EIA/TIA-232E and CCITT V.28 specifications at rates up to 120 kbps under load. The principal features include two transmit channels, two receive channels, full-duplex operation, a 5 V supply, and ±15 kV human-body-model ESD protection. The integrated charge pump generates the bipolar voltage required by the RS-232 drivers, eliminating the need for an external negative supply. Dual-channel architecture allows two independent communication paths in one package, reducing board area compared with separate single-channel interface devices. The MAX202EEUE+ family is intended for harsh communication environments where electrostatic discharge is a practical concern. Because the drivers and receivers satisfy EIA/TIA-232E and CCITT V.28 requirements at 120 kbps, the device is suitable for legacy serial links, industrial control ports, instrument interfaces, and service equipment. The 16-pin TSSOP package is surface mountable and can be placed on compact, high-density circuit boards. Typical uses include PC-to-instrument RS-232 links, industrial controller data ports, configuration interfaces, and embedded systems that communicate with legacy peripherals. When connecting the device, keep the transceiver-side and logic-side ground strategy consistent with the connected equipment, place charge-pump capacitors close to their pins, and provide adequate input bypassing. Route the RS-232 traces away from sensitive analog and high-speed digital paths where practical. The primary design trade-off is that this is a 5 V RS-232 interface rather than a modern differential interface. It supports established RS-232 infrastructure, but designers should not substitute it for RS-485 or RS-422 requirements involving longer cables, multidrop buses, or differential noise immunity. Verify connector pin assignments and signal direction before replacing an existing circuit. This page combines the manufacturer family specifications with package details, application guidance, comparison parameters, and practical integration notes. It focuses on the distinctions engineers need when confirming supply voltage, channel count, data rate, ESD protection, package compatibility, and drop-in replacement options for the MAX202EEUE+.

RFQ Contact
MAX202EEWE+ - Dual RS-232 Transceiver | Analog Devices
MAX202EEWE+

MAX202EEWE+ - Dual RS-232 Transceiver | Analog Devices

Analog Devices MAX202EEWE+ is a dual RS-232 transceiver with two drivers and two receivers, designed for +5 V serial-interface systems. It supports data rates up to 120 kbps and includes 15 kV ESD protection according to the product listing. The device is packaged in a 16-pin SOIC and is intended for equipment requiring bidirectional RS-232 communication, including industrial control, instrumentation, point-of-sale terminals, and computer peripherals. An RS-232 transceiver is an interface IC that converts between the differential logic levels used by modern digital electronics and the voltage levels required by RS-232 links. The MAX202EEWE+ combines transmitter and receiver functions in one package, allowing two communications channels to be implemented without using separate driver and receiver ICs. Its +5 V supply operation and external charge-pump capacitor requirement make it appropriate for conventional RS-232 designs rather than modern low-voltage RS-485 or RS-422 interfaces. The MAX202EEWE+ provides two transmit channels and two receive channels, each with the voltage-level conversion needed for an RS-232 link. The manufacturer describes the MAX202E family as meeting EIA/TIA-232E and CCITT V.28 specifications at data rates up to 120 kbps when loaded. The 15 kV ESD protection helps improve system resilience when cables are connected to exposed ports, although correct board-level layout and connector grounding remain essential. MAX202EEWE+ uses an external-capacitor charge-pump arrangement to generate the RS-232 level-shifting voltage required by the transmitters. The capacitors should be placed close to the device and routed according to the manufacturer application guidance. The interface operates from a 4.5 V to 5.5 V supply, and the available package information identifies a 16-pin SOIC configuration. It is a surface-mount part suited to compact embedded and industrial equipment. Typical uses include RS-232 links in test equipment, barcode scanners, printers, programmable logic controllers, security systems, and legacy computer interfaces. The dual-channel architecture can simplify wiring when two ports are required. It is especially useful where the host system uses RS-232 electrical signaling but the product must conserve board area compared with separate driver and receiver packages. When laying out a MAX202EEWE+ circuit, keep charge-pump capacitor loops compact and connect the device ground to the signal ground using a deliberate, low-impedance strategy. Check the transceiver's supply-decoupling requirements and ensure the selected connector, cable shield, and chassis-ground arrangement meet the applicable ESD and EMI requirements. The device is an interface component, not a power-conversion or signal-conditioning amplifier. This product summary combines the manufacturer family information with package, interface, protection, and sourcing details for engineers evaluating MAX202EEWE+. It also distinguishes the device from similar RS-232 families by highlighting the dual transceiver arrangement, +5 V operation, 120 kbps maximum data rate, and 15 kV ESD-protection feature. PCB footprint, pin-level connectivity, capacitor selection, and environmental qualification should be confirmed against the current MAX202E documentation before release to production.

RFQ Contact
MAX202EEWE-T - 2/2 120kbps RS-232 Transceiver | Maxim
MAX202EEWE-T

MAX202EEWE-T - 2/2 120kbps RS-232 Transceiver | Maxim

The Maxim Integrated MAX202EEWE-T is a 2-driver, 2-receiver RS-232 transceiver designed for data rates up to 120 kbps and operation from a single 5 V supply. It is packaged in a 16-pin wide SOIC package and incorporates an on-chip charge pump. The device provides ±15 kV human-body-model ESD protection and meets EIA/TIA-232E and CCITT V.28 interface requirements. An RS-232 transceiver is an interface IC that bridges a logic-level UART or other serial controller and a physical RS-232 port. It combines line drivers, which convert low-voltage logic signals into RS-232 levels, with receivers, which convert bipolar RS-232 signals back into logic levels. Within the hierarchy of interface ICs, it is a dedicated serial-interface transceiver for point-to-point industrial, instrumentation, and embedded communications. The MAX202EEWE-T provides two transmit channels and two receive channels, allowing full-duplex RS-232 communication from one package. Its maximum specified data rate of 120 kbps covers legacy serial links, industrial equipment, barcode systems, and control interfaces. Operation from a single 5 V supply simplifies system power design because the integrated charge pump generates the negative voltage required by the RS-232 drivers. The device's integrated charge pump and single-supply architecture eliminate the external negative rail and associated charge-pump capacitors normally required by discrete RS-232 interface designs. Its 16-pin SOIC package is a surface-mount package in the SOIC family, and the EWE ordering code identifies the wide SOIC, tape-and-reel configuration. A complete 16-pin pin description is required before assigning PCB tracks or confirming connector-side signal names. Typical uses include RS-232 links between microcontrollers and industrial peripherals, test and measurement instruments, service consoles, security equipment, and legacy data-acquisition systems. The two-driver, two-receiver arrangement is particularly useful for full-duplex links that carry data in both directions through one RS-232 port. For PCB implementation, keep the supply bypass capacitor close to the V+ and ground connections, route driver and receiver outputs away from sensitive low-level signals, and treat the exposed connector-side pins as harsh industrial environments. The ±15 kV HBM rating provides useful device protection, but it does not eliminate the need for system-level surge and ESD mitigation. This page combines the manufacturer interface specifications, ordering-code details, practical PCB guidance, and verified drop-in alternatives. It also identifies where pinout, package quantity, and compliance details require confirmation from the official MAX202E datasheet before production release.

RFQ Contact
MAX202EPE+ - 120kbps RS-232 Transceiver | Maxim Integrated
MAX202EPE+

MAX202EPE+ - 120kbps RS-232 Transceiver | Maxim Integrated

The Maxim Integrated MAX202EPE+ is a dual-driver, dual-receiver RS-232 interface transceiver designed for single-supply operation from 4.5V to 5.5V. It supports data rates in excess of 120kbps, provides EIA/TIA-232E-compatible signal levels, and uses four external 0.1µF charge-pump capacitors. The device is packaged in a 16-pin PDIP. An RS-232 transceiver is an interface IC that converts logic-level signals from a host, controller, or peripheral into RS-232 line levels and converts received RS-232 signals back into logic levels. Within the interface hierarchy, the MAX202EPE+ belongs to the RS-232 transceiver class, which is part of interface ICs and broader semiconductor communication components. Its integrated charge-pump circuitry eliminates the need for a separate ±12V supply, making it suitable for systems that operate from a single +5V rail. The principal features include two RS-232 drivers, two RS-232 receivers, operation from a 4.5V to 5.5V supply, and data rates above 120kbps. Four external 0.1µF capacitors support the on-chip charge-pump function. The MAX202EPE+ temperature range is -40°C to +85°C, and its listed human-body-model ESD withstand is 15kV, making it appropriate for industrial and instrumentation interfaces that require protection beyond basic logic ICs. Internally, the MAX202EPE+ combines a practical RS-232 interface with a switched-capacitor charge pump. The charge pump generates the positive and negative signal levels required by the drivers while the receivers detect and translate incoming line states. Because the receiver and driver counts are both two, the device can support two serial channels in one package. The 16-pin PDIP construction favors straightforward through-hole assembly, prototype boards, legacy equipment, and repair applications where a surface-mount package would require different tooling. Typical applications include two-channel serial links between industrial controllers and test equipment, PC and peripheral connectivity through an RS-232 port, point-to-point data acquisition links, and legacy instrumentation interfaces. It is particularly useful where the design has only a +5V supply but the connected equipment expects RS-232 signal levels. The 120kbps capability is suitable for configuration, monitoring, and control traffic rather than high-bandwidth continuous data transfer. Circuit implementation requires close attention to charge-pump capacitor placement and signal routing. Place all four 0.1µF capacitors near their associated pins, keep high-current charge-pump paths compact, and provide adequate ground return paths for receiver and driver currents. Confirm that the connected equipment uses compatible RS-232 levels and that the intended baud rate remains below the device's 120kbps capability. This page consolidates the manufacturer's product information, interface characteristics, replacement analysis, application guidance, and package-level design considerations into one engineering-focused reference. It also distinguishes the MAX202EPE+ from other MAX202 temperature and package options while keeping the comparison focused on genuine pin-compatible choices.

RFQ Contact
MAX202ESE+ - Dual +5V RS-232 Transceiver | Analog Devices
MAX202ESE+

MAX202ESE+ - Dual +5V RS-232 Transceiver | Analog Devices

Analog Devices MAX202ESE+ is a dual RS-232 transceiver with two transmitters and two receivers, integrated charge-pump circuitry, and single +5 V operation in a 16-pin narrow SOIC package. The drivers maintain ±5 V EIA/TIA-232E output levels at data rates in excess of 120 kbps, while the receivers provide a compact interface between RS-232 equipment and CMOS logic. An RS-232 transceiver is an interface IC that converts between single-ended CMOS logic signals and differential, bipolar RS-232 signals. RS-232 belongs to the broader interface IC category and is commonly used for serial data links in industrial control, instrumentation, communications equipment, and computer peripherals. The MAX202ESE+ integrates the charge-pump circuitry required to generate the positive and negative RS-232 voltage levels from one +5 V supply. The MAX202ESE+ supports data rates in excess of 120 kbps and uses 0.1 µF external capacitors for charge-pump operation. Its integrated charge pump eliminates the need for a separate negative supply at the transceiver. The device provides two transmit channels and two receive channels, allowing two RS-232 links to be implemented in a compact circuit. These characteristics suit equipment that needs bidirectional serial communication without allocating space for discrete level-shifting circuitry. Each receiver converts an RS-232 input into a CMOS-compatible output, while each driver converts CMOS logic into an RS-232 output with approximately ±5 V signaling. The Analog Devices MAX202 product page identifies the MAX202 family as supporting single +5 V operation and data rates above 120 kbps. Its industrial-temperature MAX202ESE+ ordering designation identifies the narrow-SOIC package used for compact industrial equipment layouts. Typical uses include RS-232 ports in test and measurement instruments, industrial serial controllers, data acquisition equipment, and legacy peripheral interfaces. Two transmitters and two receivers allow simultaneous communication over two channels when the host logic supports that arrangement. In longer cables or electrically noisy installations, the transceiver provides the voltage translation required between low-voltage digital hardware and RS-232 equipment. Place the 0.1 µF charge-pump capacitors close to their designated pins and provide a stable +5 V supply with low-impedance decoupling. Keep RS-232 driver outputs away from sensitive analog or high-speed digital traces, and use the receiver outputs only for compatible CMOS logic levels. The narrow SOIC package requires careful lead clearance when soldering near adjacent components. This page combines the manufacturer specifications, package details, drop-in alternatives, comparison parameters, and practical RS-232 interface design guidance. It helps engineers evaluate the MAX202ESE+ as a dual-channel, +5 V RS-232 transceiver for compact industrial and instrumentation designs.

RFQ Contact
MAX202ESE-C78046 - 5V RS-232 Transceiver | Analog Devices
MAX202ESE-C78046

MAX202ESE-C78046 - 5V RS-232 Transceiver | Analog Devices

Analog Devices MAX202ESE-C78046 is a 5V RS-232 transceiver with two driver and two receiver channels, ±5V EIA/TIA-232E signal levels, data rates in excess of 120 kbps, and external 0.1 µF charge-pump capacitors in a 16-pin SOIC package. The device supports enable and shutdown control for managed RS-232 ports. A dual RS-232 transceiver is an interface IC that converts logic-level signals into balanced, voltage-compliant RS-232 levels and converts incoming RS-232 signals back into CMOS-compatible logic. The MAX202 family belongs to the hierarchy RS-232 transceiver → interface controller → digital interface IC → semiconductor. It is intended to bridge a modern digital controller or UART with an RS-232 connector or cable. The MAX202 architecture combines transmitter and receiver functions with an on-chip charge-pump circuit. The charge pump generates the elevated voltage required to produce ±5V EIA/TIA-232E output levels from a single 5V supply. External 0.1 µF capacitors support the charge-pump function, while the enable and shutdown inputs let the system control whether the interface operates normally or enters a low-power state. According to the Analog Devices MAX202 product information, the drivers maintain ±5V EIA/TIA-232E output levels at data rates in excess of 120 kbps when loaded according to the EIA/TIA-232E specification. This makes the interface suitable for conventional serial-control links, point-of-sale equipment, industrial controllers, test systems, and legacy computer equipment. Multiple channels can also support hardware handshaking through the receiver and driver combinations available in the family. A MAX202 is appropriate when the target port requires true RS-232 levels rather than short-distance TTL or LVCMOS signaling. The external charge-pump capacitors and 16-pin SOIC footprint require careful placement, but the result is a compact, standardized interface for equipment where cable length and ground-offset tolerance are more important than maximum data throughput. During layout, place the 0.1 µF charge-pump capacitors close to their designated pins and route the high-voltage charge-pump node as short as possible. Confirm the host-side UART logic levels, RS-232 connector pin assignment, and cable-length requirements before release. Add suitable protection for exposed external ports because the IC itself is not an ESD-protection device. This product page consolidates the MAX202 function, package, interface parameters, sourcing options, and design guidance into a focused engineering reference. It also distinguishes true same-package drop-in alternatives from parts that merely perform a similar RS-232 function but require a different footprint or interface architecture.

RFQ Contact
MAX202ESE-TG068 - 5V RS-232 Transceiver | Analog Devices
MAX202ESE-TG068

MAX202ESE-TG068 - 5V RS-232 Transceiver | Analog Devices

The Analog Devices MAX202ESE-TG068 is a 5 V RS-232 transceiver with two driver and two receiver channels in a 16-pin SOIC package. It supports data rates in excess of 120 kbps and maintains plus or minus 5 V EIA/TIA-232E output signal levels when loaded in accordance with the EIA/TIA-232E specification. The device uses 0.1 uF external capacitors for its charge-pump voltage converter. An RS-232 transceiver is an interface IC that converts between single-ended logic-level signals and differential, bipolar RS-232 signals. It belongs to the line-driver and line-receiver hierarchy, within interface ICs and communication semiconductors. Unlike TTL or CMOS serial links, RS-232 defines voltage levels, driver impedance, and receiver behavior for reliable point-to-point data transfer over longer cables. The MAX202 family combines integrated drivers, receivers, and an on-chip charge pump in one package. The TG068 ordering code identifies a specific package, temperature, and marking configuration of the MAX202ESE device. Key characteristics include two RS-232 drivers, two RS-232 receivers, 5 V single-supply operation, 16-pin SOIC packaging, and external 0.1 uF charge-pump capacitors. The manufacturer product page describes operation above 120 kbps while maintaining the specified plus or minus 5 V output levels. The charge-pump architecture allows the MAX202 to generate the positive and negative RS-232 voltages required by the interface from a single 5 V supply. Its integrated drivers include slew-rate control for reducing transmission glitches, while the receivers use the differential voltage thresholds defined for EIA/TIA-232E. Because the external capacitors establish the charge-pump operating point, their type, voltage rating, tolerance, and placement directly affect interface performance. Typical uses include industrial serial consoles, instrumentation links, point-of-sale equipment, data acquisition systems, and service interfaces where a host must exchange RS-232 data with a peripheral over a shielded cable. The device is also useful in legacy equipment upgrades, test fixtures, and embedded control panels that retain an RS-232 physical interface while adding modern logic internally. For PCB design, place the 0.1 uF charge-pump capacitors close to their corresponding pins, route the RS-232 driver outputs away from sensitive receiver inputs, and provide a controlled reference ground near the connector. Verify the interface level and connector gender before assembly because RS-232 links commonly require crossover wiring. Use the manufacturer pin-description table and the MAX202 datasheet for the authoritative signal assignment.

RFQ Contact
MAX202EWE+T - 120kbps RS-232 Transceiver | Analog Devices
MAX202EWE+T

MAX202EWE+T - 120kbps RS-232 Transceiver | Analog Devices

The Analog Devices MAX202EWE+T is a single-supply RS-232 line-interface transceiver with two drivers and two receivers, data rates up to 120 kbps, and a 16-pin wide SOIC package. Its nominal +5 V supply, 4.5 V to 5.5 V operating range, and external 0.1 µF charge-pump capacitors make it suitable for compact serial interfaces, industrial equipment, and legacy computer communication ports. An RS-232 transceiver is an interface IC that converts logic-level signals between a host controller and a cable-based RS-232 port. Within the interface-IC hierarchy, it sits between general digital logic and differential or bipolar communication circuitry. The MAX202EWE+T integrates both signal conversion and charge-pump support, reducing the number of external components required for a working bidirectional RS-232 port. The device provides two transmit channels and two receive channels. Its integrated charge-pump circuitry supports the positive and negative voltage levels required by RS-232 from one 5 V supply. According to the Analog Devices MAX202E datasheet, the drivers maintain ±5 V EIA/TIA-232E output levels at data rates in excess of 120 kbps when loaded according to the applicable interface requirements. The E-series interface is intended for designs where reliable operation in the presence of noisy environments or partially powered systems is important. The MAX202E family also provides receiver behavior that helps control bus contention when the interface may be exposed to an active external driver. Exact input thresholds, receiver hysteresis, and protection details should be confirmed in the manufacturer datasheet before finalizing an industrial safety design. Typical uses include RS-232 service ports on test and measurement equipment, industrial controllers, point-of-sale terminals, instrumentation, and computer peripherals. Two channels allow one connector to carry two data paths, while receive channels can monitor status, handshake, or equipment-control signals when the host uses hardware handshaking. PCB design should preserve the datasheet’s external-capacitor and charge-pump layout, provide a continuous return path between the interface and connector ground, and keep the RS-232 driver outputs away from sensitive analog circuitry. Decoupling capacitance and placement requirements should be implemented exactly as shown in the manufacturer’s recommended layout to maintain stable operation. This product data combines the manufacturer’s interface specifications, verified distributor listings, package information, replacement analysis, and practical PCB guidance. It is intended to accelerate component selection and board-level implementation without obscuring the electrical limits of the MAX202EWE+T.

RFQ Contact
MAX202ICSE+ - 120kbps RS-232 Transceiver | Analog Devices
MAX202ICSE+

MAX202ICSE+ - 120kbps RS-232 Transceiver | Analog Devices

The Analog Devices MAX202ICSE+ is a 2/2 RS-232 transceiver with two drivers and two receivers, support for data rates up to 120kbps, and operation from a 4.5V to 5.5V single supply. The device is housed in a 16-pin narrow SOIC surface-mount package and uses 0.1µF external charge-pump capacitors. An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and a RS-232 port. It combines differential voltage drivers and receiver inputs with charge-pump circuitry that develops the positive and negative voltages required by the RS-232 standard. Within the interface hierarchy, the MAX202ICSE+ belongs to the RS-232 transceiver class of interface ICs. The principal operating specifications include two transmit channels, two receive channels, a maximum data rate of 120kbps, and a 4.5V to 5.5V supply range. Its receivers provide 500mV hysteresis, which improves noise immunity around the RS-232 threshold. The 16-SOIC package supports compact surface-mount construction while exposing the driver outputs, receiver inputs, supply connections, ground reference, and external capacitor connections. The MAX202 family generates the bipolar voltage levels required by RS-232 from a single 5V supply. External 0.1µF capacitors support the internal charge-pump network, allowing the transceiver to produce approximately ±5V output levels when operated according to the EIA/TIA-232E requirements. The 120kbps capability makes the device suitable for data links beyond low-speed serial-console applications while retaining the familiar RS-232 physical interface. Typical uses include industrial control systems, data-acquisition equipment, instrumentation, service consoles, and embedded systems that communicate with legacy RS-232 peripherals. The two-driver and two-receiver arrangement supports full-duplex point-to-point communication. It is especially useful where a modern controller has a logic-level UART but the connected equipment still requires an RS-232 electrical interface. PCB design should keep the charge-pump capacitors close to their designated pins and route the RS-232 driver outputs away from sensitive receiver and logic traces. Decoupling should provide a low-impedance connection between the device supply and ground, while the interface enclosure and cable should handle external electrostatic discharge and surge exposure that is outside the IC itself. This product page combines the MAX202 electrical specifications, package details, sourcing guidance, comparison parameters, and implementation notes needed to evaluate the MAX202ICSE+ for a new RS-232 interface or a controlled replacement on an existing 16-SOIC design.

RFQ Contact
MAX202ICSE+T - 120kbps Dual RS-232 Transceiver | Analog Devices
MAX202ICSE+T

MAX202ICSE+T - 120kbps Dual RS-232 Transceiver | Analog Devices

Analog Devices MAX202ICSE+T is a dual RS-232 line transceiver with two drivers and two receivers, data rates up to 120 kbps, and a 4.5 V to 5.5 V single supply. It is packaged in a 16-pin narrow SOIC and includes on-chip charge-pump circuitry for ±5 V EIA/TIA-232E output levels. The MAX202ICSE+T is designed for equipment requiring bidirectional RS-232 connectivity from a 5 V supply and external 0.1 µF charge-pump capacitors. An RS-232 transceiver is an interface IC that combines line drivers and line receivers in one package. The driver converts low-voltage logic signals into bipolar RS-232 levels, while the receiver converts bipolar line signals back into logic-compatible levels. The RS-232 interface belongs to the interface IC hierarchy, where transceiver functions bridge older serial equipment and modern embedded or computer-based control systems. The MAX202 offers two transmit channels, two receive channels, operation from a 4.5 V to 5.5 V supply, and data rates in excess of 120 kbps when loaded according to EIA/TIA-232E. Its integrated charge-pump circuitry eliminates the need for a separate bipolar supply. The 16-pin SOIC package supports compact surface-mount designs, while the +T ordering code identifies the tape-and-reel shipping format. Technically, the charge-pump network creates the positive and negative voltage rails needed by the line drivers. Four external 0.1 µF capacitors support the charge-pump function. The receivers provide hysteresis for reliable signal detection, while the drivers maintain approximately ±5 V EIA/TIA-232E output levels. The listed operating range for the MAX202ICSE is 0°C to 70°C, with 500 mV receiver hysteresis. Typical uses include RS-232 links between embedded controllers and industrial peripherals, service-console adapters, laboratory equipment, and legacy communication ports. The device is particularly suitable when a system already has a 5 V rail and needs bidirectional serial connectivity without adding a separate negative power supply. Appropriate transient protection and grounding remain necessary when connecting to external cables. When laying out the PCB, place all four charge-pump capacitors close to their associated IC pins and keep the high-current driver outputs away from sensitive receiver and logic traces. Confirm the external cable length, signal integrity, grounding strategy, and protection requirements against the operating environment. The MAX202ICSE+T does not provide a complete board-level surge-protection solution. This product page consolidates the MAX202 family specifications, package details, temperature-grade alternatives, and practical PCB guidance into an engineer-focused reference. It also identifies the functional distinctions among compatible MAX202 ordering codes so that a replacement can be selected without changing the existing 16-pin SOIC footprint.

RFQ Contact
MAX202ID - 120kbps Dual RS-232 Transceiver | Texas Instruments
MAX202ID

MAX202ID - 120kbps Dual RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX202ID is a 5 V dual RS-232 line driver and receiver, commonly called a 2/2 transceiver, with a maximum data rate of 120 kbps and ±15 kV ESD protection in a 16-pin SOIC package. It provides two line drivers, two line receivers, and an onboard dual charge-pump circuit. The interface meets TIA/EIA-232-F requirements and bridges TTL or CMOS logic levels with the positive and negative voltage signaling used by RS-232. An RS-232 transceiver is an interface IC within the broader communications-interface and semiconductor hierarchy. Its driver channels convert logic-level inputs into bipolar RS-232 outputs, while its receiver channels convert bipolar serial inputs into logic-level signals. The MAX202ID integrates both directions into one package, making it suitable for asynchronous serial links, industrial control links, data acquisition equipment, and legacy computer peripherals. Key features include operation from a single 5 V supply, a 120 kbps maximum signaling rate, ±9 V output levels, and ±15 kV human-body-model ESD protection on the serial-port pins, including ground. Four external 0.1 µF capacitors support the integrated charge pump. The device is designed to be interchangeable with the Maxim MAX202 and is identified as a 16-SOIC part operating across the industrial temperature range. Technically, the MAX202ID combines two transmit channels and two receive channels with a dual charge pump. The charge pump generates the voltage excursions needed by RS-232 even though the IC itself operates from 5 V. Pin-compatible alternatives identified in the supplied cross-reference material include MAX202EESE+T and MAX202EWE+; their package and terminal compatibility should still be checked against the exact production schematic before substitution. Typical uses include RS-232 links between microcontrollers and external equipment, instrumentation, service interfaces, and industrial serial adapters. Its 120 kbps rate is suitable for many asynchronous control and data-transfer applications but is not the choice for higher-bandwidth RS-232 links. The integrated ESD protection improves resilience when the connector is exposed to user-contact transients. Design attention should be given to charge-pump capacitor placement, grounding, and the voltage drop across the external RS-232 connection. The four specified 0.1 µF capacitors should be placed close to their associated pins, and the ground path should be short and continuous. A logic-side supply decoupler and appropriately rated serial connector are also important for reliable operation. This page consolidates the verified manufacturer and distributor information, practical RS-232 design guidance, application fit, and same-footprint replacement context for engineers evaluating the MAX202ID. Distributor pricing and availability should be checked against the current source data before purchase.

RFQ Contact
MAX202IDG4 - 5V Dual RS-232 Transceiver | Texas Instruments
MAX202IDG4

MAX202IDG4 - 5V Dual RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX202IDG4 is a 5 V dual RS-232 line driver and receiver with two transmit channels, two receive channels, and integrated charge-pump voltage generation. It supports data rates up to 120 kbps, provides ±9 V driver outputs, and includes ±15 kV ESD protection on the serial-port pins. The device is packaged in a 16-pin SOIC. An RS-232 interface transceiver is an interface IC that converts logic-level signals between a computer or embedded controller and the voltage levels used by an RS-232 serial link. In the signal path, the line-driver section converts TTL or CMOS logic into bipolar RS-232 levels, while the receiver section restores the logic signal. As a transceiver, the MAX202IDG4 combines both functions within one package. Key features include a single 5 V supply, dual-driver and dual-receiver configuration, ±15 kV ESD protection, and operation over the industrial temperature range of -40°C to +85°C. The integrated dual charge-pump circuit generates the positive and negative voltages required by the RS-232 drivers, eliminating the need for external supply rails. The ±9 V output swing provides compatibility with standard RS-232 links. The device meets EIA-232-F requirements and supports full-duplex serial communication through two independent driver and receiver paths. Its 120 kbps maximum data rate suits legacy serial ports, industrial control links, service interfaces, and embedded systems that retain an RS-232 connector. The integrated ESD structures improve robustness at connector-facing pins, although external protection and layout practices remain important in exposed environments. Typical applications include industrial serial controllers, laboratory equipment, POS terminals, data-acquisition systems, and service ports for embedded equipment. The MAX202IDG4 is particularly useful where a logic-level UART must communicate with an RS-232 host through a 16-SOIC footprint. When laying out the circuit, place the charge-pump capacitors and the receiver and driver bypass capacitors directly beside their associated pins. Route connector-side traces away from sensitive logic, and connect the interface ground reference properly. Verify the UART baud rate against the device's 120 kbps limit and confirm the cable length against the selected RS-232 standard. This page combines manufacturer specifications, application guidance, drop-in comparison options, and practical interface-design notes to help engineers evaluate the MAX202IDG4 beyond a basic catalog description.

RFQ Contact
MAX202IDR - 120kbps Dual RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX202IDR

MAX202IDR - 120kbps Dual RS-232 Transceiver | Texas Instruments (Tape & Reel)

The Texas Instruments MAX202IDR is a 5 V dual RS-232 line driver and receiver, commonly called a 2/2 transceiver, with a maximum data rate of 120 kbps and ±15 kV ESD protection in a 16-pin SOIC package. It provides two line drivers, two line receivers, and an onboard dual charge-pump circuit. The interface meets TIA/EIA-232-F requirements and bridges TTL or CMOS logic levels with the positive and negative voltage signaling used by RS-232. An RS-232 transceiver is an interface IC within the broader communications-interface and semiconductor hierarchy. Its driver channels convert logic-level inputs into bipolar RS-232 outputs, while its receiver channels convert bipolar serial inputs into logic-level signals. The MAX202IDR integrates both directions into one package, making it suitable for asynchronous serial links, industrial control links, data acquisition equipment, and legacy computer peripherals. Key features include operation from a single 5 V supply, a 120 kbps maximum signaling rate, ±9 V output levels, and ±15 kV human-body-model ESD protection on the serial-port pins, including ground. Four external 0.1 µF capacitors support the integrated charge pump. The device is designed to be interchangeable with the Maxim MAX202 and is identified as a 16-SOIC part operating across the industrial temperature range. Technically, the MAX202IDR combines two transmit channels and two receive channels with a dual charge pump. The charge pump generates the voltage excursions needed by RS-232 even though the IC itself operates from 5 V. Pin-compatible alternatives identified in the supplied cross-reference material include MAX202EESE+T and MAX202EWE+; their package and terminal compatibility should still be checked against the exact production schematic before substitution. Typical uses include RS-232 links between microcontrollers and external equipment, instrumentation, service interfaces, and industrial serial adapters. Its 120 kbps rate is suitable for many asynchronous control and data-transfer applications but is not the choice for higher-bandwidth RS-232 links. The integrated ESD protection improves resilience when the connector is exposed to user-contact transients. Design attention should be given to charge-pump capacitor placement, grounding, and the voltage drop across the external RS-232 connection. The four specified 0.1 µF capacitors should be placed close to their associated pins, and the ground path should be short and continuous. A logic-side supply decoupler and appropriately rated serial connector are also important for reliable operation. This page consolidates the verified manufacturer and distributor information, practical RS-232 design guidance, application fit, and same-footprint replacement context for engineers evaluating the MAX202IDR. Distributor pricing and availability should be checked against the current source data before purchase.

RFQ Contact
MAX202IN - 120kbps Dual RS-232 Transceiver | Texas Instruments
MAX202IN

MAX202IN - 120kbps Dual RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX202IN is a 5 V dual RS-232 line driver and receiver with two transmit channels, two receive channels, integrated charge-pump voltage conversion, and ±15 kV human-body-model ESD protection on the serial-port pins. It operates at up to 120 kbit/s and uses external 0.1 µF charge-pump capacitors. The MAX202IN is packaged for through-hole industrial and legacy serial-interface designs, subject to confirmation of the exact ordering code and package variant. An RS-232 transceiver is the interface between a modern controller’s logic-level UART signals and the higher-voltage, ground-referenced RS-232 bus. A line driver converts outgoing logic levels into RS-232 levels, while a line receiver converts incoming bus levels into logic-compatible signals. In the signal-chain hierarchy, the MAX202IN belongs to the interface-IC class and specifically implements an RS-232 line interface for asynchronous serial communication. The verified device data identifies a 5 V supply, 120 kbit/s operation, ±9 V output capability, and ±15 kV ESD protection. These specifications suit equipment that needs bidirectional RS-232 conversion, including PC serial adapters, industrial control links, instrumentation, and legacy peripheral connections. The integrated charge pump generates the bipolar voltage required by RS-232 drivers, reducing the external support circuit compared with discrete implementations. The device uses a dual charge-pump circuit with four small external capacitors. These capacitors must be selected and placed according to the manufacturer datasheet, with short, symmetric routing helping preserve signal and charge-pump performance. The serial-port pins are the primary ESD-sensitive interface, so external protection may still be considered when cables are long, exposed, or routed through industrial environments. Typical applications include multi-drop or point-to-point serial links, service-console equipment, test systems, and embedded controller interfaces that retain an RS-232 physical layer. Because the MAX202IN is designed for 5 V operation, verify the host supply, logic levels, connector wiring, and ground strategy before placing it in a modern 3.3 V design. Do not infer 3.3 V compatibility from the RS-232 signal levels alone. For reliable PCB integration, use the manufacturer’s specified capacitor values, keep the charge-pump loop compact, route driver outputs and receiver inputs away from sensitive analog nodes, and provide a low-impedance ground return. Verify receive thresholds and bus termination against the system cable length and topology. This product page combines the verified manufacturer data, package requirements that remain subject to datasheet confirmation, and application guidance for engineers evaluating a legacy serial interface.

RFQ Contact
MAX202IPW - 5V Dual RS-232 Transceiver | Texas Instruments
MAX202IPW

MAX202IPW - 5V Dual RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX202IPW is a 5 V dual-channel RS-232 line driver and receiver rated for data rates up to 120 kbit/s, with ±9 V output swing, ±15 kV ESD protection, and a 16-pin TSSOP package. The device provides two transmit channels and two receive channels for bidirectional serial-port interfaces. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232-compatible differential voltage levels and converts received RS-232 signals back into logic levels. The MAX202 belongs to the RS-232 transceiver hierarchy, combining line drivers, line receivers, and a dual charge-pump circuit in one package. It connects asynchronous communication controllers, such as microcontrollers and UART peripherals, to RS-232 serial ports. Key features include a nominal 5 V supply, operation across a 4.5 V to 5.5 V supply range, ±9 V output swing, and ±15 kV human-body-model ESD protection on the serial-port pins. The IC supports operation to 120 kbit/s and includes on-chip charge-pump circuitry, reducing the external component count compared with discrete RS-232 designs. The MAX202 provides two drivers and two receivers, allowing two RS-232 links to be implemented with one device. Its on-chip dual charge pump generates the voltage conversion required by the transmitter stage. Four external 0.1 µF capacitors support the charge-pump function, and the device is designed to meet TIA/EIA-232-F and ITU V.28 interface requirements. Typical applications include industrial serial-port equipment, data-acquisition systems, point-of-sale terminals, service interfaces, embedded control systems, and legacy peripheral connectivity. The MAX202IPW is particularly appropriate where compact PCB area, bidirectional RS-232 communication, and built-in ESD protection are important. Designers should place the four 0.1 µF charge-pump capacitors close to their associated pins, maintain short return paths, and connect the transceiver ground to the equipment ground. Cable-side ESD protection and isolation requirements should be evaluated separately because the integrated ±15 kV protection specification does not remove the need for a robust mechanical and grounding design. This product data combines the verified manufacturer specifications with same-package replacement analysis, practical layout guidance, and a parameter-by-parameter comparison. It is intended to help engineers identify whether a candidate is truly pin-compatible rather than merely functionally similar.

RFQ Contact
MAX202IPWRE4 - 120 kbit/s Dual RS-232 Transceiver | Texas Instruments
MAX202IPWRE4

MAX202IPWRE4 - 120 kbit/s Dual RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX202IPWRE4 is a 5 V dual RS-232 line driver and receiver with ±15 kV ESD protection, operating at up to 120 kbit/s in a 16-pin TSSOP package. The integrated device contains two line drivers, two line receivers, and a dual charge-pump circuit. Its pin-to-pin interface supports the transmission and reception of RS-232 signals between an asynchronous communication controller and a serial-port connector. An RS-232 transceiver is an interface IC that converts logic-level signals into bipolar RS-232 line levels and converts received line signals back into logic-compatible levels. It belongs to the interface IC hierarchy, where transceivers combine drivers, receivers, and voltage-level conversion for reliable data links. The MAX202IPWRE4 implements this function with integrated charge pumps and external bypass capacitors, reducing the discrete component count required around a conventional RS-232 port. The principal operating characteristics include a 5 V supply, a maximum data rate of 120 kbit/s, and ±15 kV human-body-model ESD protection on the serial-port connection pins, including ground. The device meets or exceeds TIA/EIA-232-F and ITU v.28 requirements. Two external 0.1 µF capacitors support the charge-pump circuit, while its 2/2 transceiver organization supports two transmit and two receive channels in one package. Internally, the dual charge-pump circuit generates the positive and negative voltage levels required by RS-232 drivers. The receivers convert those bipolar levels into CMOS-compatible signals for the host controller. This integrated architecture is especially useful for legacy serial equipment, industrial control links, service interfaces, and embedded systems that retain an RS-232 port while using modern digital control logic. Typical uses include point-to-point asynchronous serial links, instrument-control consoles, barcode and identification equipment, industrial diagnostics, and communication between a host UART and a DB9 or equivalent RS-232 connector. The dual-channel arrangement can serve two independent serial directions or paired command-and-status paths where channel count permits. System designers should also account for the cable, grounding, and connector requirements of the RS-232 standard. Place each 0.1 µF charge-pump capacitor close to its designated IC pins and provide a low-impedance connection to the device ground. Keep the interface trace routing compact, and route the exposed RS-232 pins only toward the external connector because those nets carry high-voltage transients. A suitable serial connector and protection network should be placed close to the board edge. This page consolidates the MAX202IPWRE4 electrical characteristics, package information, qualified comparison references, and practical PCB guidance into an engineer-focused guide. It also identifies where the available cross-reference records do not establish enough evidence to claim additional drop-in replacements.

RFQ Contact
MAX211CAI+ - +5V RS-232 Transceiver, 4 Drivers/5 Receivers, SSOP-28
MAX211CAI+

MAX211CAI+ - +5V RS-232 Transceiver, 4 Drivers/5 Receivers, SSOP-28

The Maxim Integrated MAX211CAI+ is a +5V RS-232 transceiver with four 0.1µF external charge-pump capacitors and integrated DC-DC charge-pump circuitry in a 28-pin SSOP package. It delivers four RS-232 drivers and five RS-232 receivers, supporting data rates in excess of 120 kbps while maintaining ±5V EIA/TIA-232E compliant output levels. The MAX211CAI+ operates from a single +4.5V to +5.5V supply. An RS-232 transceiver is an interface IC that converts logic-level UART signals (0/5V CMOS/TTL) to the bipolar ±5V to ±12V voltage levels required by the legacy EIA/TIA-232E serial communication standard. RS-232 transceivers sit between a microcontroller UART and an external DB9/DB25 connector, providing level shifting, inverting, and electrostatic discharge protection. In the broader component taxonomy, the MAX211CAI+ belongs to line transceivers -> interface ICs -> integrated circuits. Key features include single +5V supply operation (no ±12V rails needed), 4 drivers + 5 receivers, integrated charge pump with four small 0.1µF capacitors, ±5V RS-232 output levels compliant with EIA/TIA-232E, and guaranteed data rate above 120 kbps. The 28-pin SSOP (Shrink Small Outline Package) occupies approximately 40% of the board area of an equivalent 28-pin SO package. The MAX211CAI+ uses Maxim's proprietary charge-pump architecture with a flying capacitor and reservoir capacitors to generate the +10V and -10V rails needed for true RS-232-compliant signaling from a single +5V input. This eliminates the need for multiple system power rails and permits direct connection to any 5V microcontroller UART. The device is built on a BiCMOS process that combines bipolar drivers for robust ±5V output swing with CMOS logic for low power consumption. Typical applications include point-of-sale terminals, industrial control serial ports, legacy PC serial ports, embedded debugging consoles, and any MCU-to-RS232 interface. The MAX211CAI+ is widely used in designs that need to retain compatibility with older RS-232 peripherals while running off a single 5V rail. When designing with the MAX211CAI+, place the four 0.1µF charge-pump capacitors (C1+, C1-, C2+, C2-) as close to the IC pins as possible to minimize parasitic inductance. Use 10µF tantalum or ceramic bypass capacitors on VCC and V+ pins to suppress ripple from the charge-pump switching. For ESD protection on the RS-232 side, add an external TVS diode array rated for ±15kV HBM. This page consolidates distributor pricing (DigiKey, Mouser, LCSC), drop-in alternatives, and practical PCB-layout notes for the MAX211CAI+ that the bare datasheet does not provide.

RFQ Contact
MAX211CDB - 120 kbit/s 4/5 RS-232 Transceiver | Texas Instruments
MAX211CDB

MAX211CDB - 120 kbit/s 4/5 RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX211CDB is a 5 V multichannel RS-232 line driver and receiver with four drivers, five receivers, operation up to 120 kbit/s, and ±15 kV human-body-model ESD protection on the bus pins. It is packaged in a 28-pin SSOP. According to the Texas Instruments product page, its driver outputs swing to ±9 V, allowing it to meet the voltage requirements of RS-232 systems operating from one 5 V supply. An RS-232 transceiver is an interface IC that converts logic-level signals into differential, voltage-swinged serial signals and converts received RS-232 levels back into logic-level voltages. In the interface hierarchy, the MAX211CDB belongs to the RS-232 transceiver, interface IC, and semiconductor categories. Its four-driver and five-receiver arrangement supports multiport communications equipment while providing three driver channels in shutdown for applications requiring partial low-power operation. Key features include four drivers, five receivers, a 120 kbit/s operating rate, ±9 V driver output swing, ±15 kV ESD protection, and low supply current in shutdown. The integrated charge-pump circuitry supports single-supply operation. These characteristics make the device suitable for computers, industrial controllers, data-acquisition equipment, and other systems that exchange serial data over longer cable runs than TTL or CMOS interfaces can reliably support. The RS-232 electrical interface uses unbalanced, single-ended signaling with a large voltage range relative to common-mode noise. The MAX211CDB is designed for TIA/EIA-232-F and ITU V.28 operation, as stated in the retrieved manufacturer-material summary. Its receiver and driver circuitry provide the voltage translation required at the boundary between digital logic and the RS-232 cable interface. The integrated ESD protection is particularly valuable when an exposed connector receives cable transients. Typical uses include four-wire RS-232 links, multi-channel serial adapters, test equipment, and embedded systems that retain legacy peripheral connections. In a complete interface, the controller UART connects to TTL-level driver inputs, while each driver output feeds an external connector through the application’s protection and routing network. Receivers return cable signals to the UART through external resistor networks when the selected pinout calls for them. Designers should confirm the exact DB package pinout and external charge-pump capacitor values from the manufacturer datasheet. Decoupling capacitors must be placed close to the supply pins, and cable-side routing should minimize exposed stubs. External protection, series resistance, and connector grounding should be selected with the target ESD, surge, and cable-length requirements in mind. This page consolidates verified manufacturer and distributor information, package details, RS-232 design considerations, and drop-in alternatives into an engineering-focused selection resource. It also distinguishes verified specifications from parameters that still require confirmation from the current manufacturer datasheet.

RFQ Contact
MAX211CDBR - 120 kbit/s 4/5 RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX211CDBR

MAX211CDBR - 120 kbit/s 4/5 RS-232 Transceiver | Texas Instruments (Tape & Reel)

The Texas Instruments MAX211CDBR is a 5 V multichannel RS-232 line driver and receiver with four drivers, five receivers, operation up to 120 kbit/s, and ±15 kV human-body-model ESD protection on the bus pins. It is packaged in a 28-pin SSOP. According to the Texas Instruments product page, its driver outputs swing to ±9 V, allowing it to meet the voltage requirements of RS-232 systems operating from one 5 V supply. An RS-232 transceiver is an interface IC that converts logic-level signals into differential, voltage-swinged serial signals and converts received RS-232 levels back into logic-level voltages. In the interface hierarchy, the MAX211CDBR belongs to the RS-232 transceiver, interface IC, and semiconductor categories. Its four-driver and five-receiver arrangement supports multiport communications equipment while providing three driver channels in shutdown for applications requiring partial low-power operation. Key features include four drivers, five receivers, a 120 kbit/s operating rate, ±9 V driver output swing, ±15 kV ESD protection, and low supply current in shutdown. The integrated charge-pump circuitry supports single-supply operation. These characteristics make the device suitable for computers, industrial controllers, data-acquisition equipment, and other systems that exchange serial data over longer cable runs than TTL or CMOS interfaces can reliably support. The RS-232 electrical interface uses unbalanced, single-ended signaling with a large voltage range relative to common-mode noise. The MAX211CDBR is designed for TIA/EIA-232-F and ITU V.28 operation, as stated in the retrieved manufacturer-material summary. Its receiver and driver circuitry provide the voltage translation required at the boundary between digital logic and the RS-232 cable interface. The integrated ESD protection is particularly valuable when an exposed connector receives cable transients. Typical uses include four-wire RS-232 links, multi-channel serial adapters, test equipment, and embedded systems that retain legacy peripheral connections. In a complete interface, the controller UART connects to TTL-level driver inputs, while each driver output feeds an external connector through the application’s protection and routing network. Receivers return cable signals to the UART through external resistor networks when the selected pinout calls for them. Designers should confirm the exact DB package pinout and external charge-pump capacitor values from the manufacturer datasheet. Decoupling capacitors must be placed close to the supply pins, and cable-side routing should minimize exposed stubs. External protection, series resistance, and connector grounding should be selected with the target ESD, surge, and cable-length requirements in mind. This page consolidates verified manufacturer and distributor information, package details, RS-232 design considerations, and drop-in alternatives into an engineering-focused selection resource. It also distinguishes verified specifications from parameters that still require confirmation from the current manufacturer datasheet.

RFQ Contact
MAX211CDW - 5V 4/5 RS-232 Transceiver | Texas Instruments
MAX211CDW

MAX211CDW - 5V 4/5 RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX211CDW is a 5 V multichannel RS-232 line driver and receiver with four drivers, five receivers, ±9 V output levels, ±15 kV ESD protection, and operation up to 120 kbit/s in a 28-pin SOIC package. It provides the electrical interface between an asynchronous communication controller and a serial-port connector. An RS-232 transceiver is an interface IC that combines logic-level driver and receiver circuits with the voltage levels required by the TIA/EIA-232-F and ITU V.28 serial-interface standards. These devices translate low-voltage digital signals into bipolar RS-232 levels at the transmitter and convert received bipolar signals back into logic levels. The MAX211CDW also includes a dual charge-pump circuit for generating the required positive and negative voltage rails. Key features include four RS-232 drivers, five RS-232 receivers, a single 5 V supply, ±15 kV ESD protection on serial-port connection pins, and a maximum data rate of 120 kbit/s. The five receivers provide more receive channels than the four transmit channels, allowing additional modem-control or handshake signals to be monitored without requiring separate receiver circuitry. The MAX211CDW uses a dual charge-pump architecture together with four small external capacitors to produce the bipolar voltage levels required by an RS-232 link. According to the manufacturer product information, the device provides pin-to-pin ESD protection across the serial-port connection pins, including ground, and meets the electrical requirements of TIA/EIA-232-F. These characteristics make the IC appropriate for legacy and industrial asynchronous serial interfaces. Typical applications include industrial equipment controllers, data-acquisition systems, instrument interfaces, point-of-sale equipment, and RS-232 ports on embedded systems. The integrated protection is particularly useful where cables connect to external equipment through long or exposed routes, while the 120 kbit/s rate supports common asynchronous serial protocols and simple command exchanges. Designers should place the charge-pump capacitors close to their associated pins, maintain the recommended external-capacitor values, and provide adequate PCB ground connectivity. Decoupling near VCC is also important because the charge pump and switching elements can return ripple to the supply rail. A clean layout helps preserve signal integrity and makes the protection circuitry more effective. This page consolidates verified manufacturer and distributor information, identifies same-family drop-in candidates, and adds practical placement guidance, comparison parameters, and application-specific selection criteria that are not presented as a single block in the manufacturer datasheet.

RFQ Contact
MAX211CDWG4 - 4/5 RS-232 Transceiver, 120kbps | Texas Instruments
MAX211CDWG4

MAX211CDWG4 - 4/5 RS-232 Transceiver, 120kbps | Texas Instruments

Texas Instruments MAX211CDWG4 is a 5 V multichannel RS-232 line driver and receiver with four drivers, five receivers, operation to 120 kbit/s, and a 28-pin SOIC package. It operates from a 4.5 V to 5.5 V supply and is specified for the commercial temperature range of 0°C to +70°C. An RS-232 transceiver is an interface IC that combines voltage-conversion line drivers and receivers with a logic-level UART interface. The MAX211 family belongs to the hierarchy RS-232 transceiver → serial interface IC → interface IC → semiconductor. By converting between logic-level signals and RS-232 levels, it enables equipment with a serial UART port to communicate with peripherals, computers, industrial controllers, and other equipment using the TIA/EIA-232-F electrical interface. Four driver channels support bidirectional serial links, while the five receiver channels provide additional receive capability. The MAX211CDWG4 operates to 120 kbit/s, making it suitable for moderate-speed data links rather than high-speed differential communications. Its 5 V supply operation is compatible with conventional 5 V logic systems, although the interface voltage levels remain RS-232 bipolar signals rather than CMOS levels. The device provides ±15 kV HBM ESD protection on its RS-232 pins and meets or exceeds TIA/EIA-232-F and ITU V.28 requirements. Shutdown operation reduces supply current to a typical 1 µA, which helps conserve power when the interface is inactive. These protections and shutdown characteristics are important in industrial and commercial environments where cables can be exposed to electrostatic discharge or where predictable low-power operation is required. Typical applications include RS-232 ports on industrial controllers, test equipment, data-acquisition systems, point-of-sale equipment, and embedded serial interfaces. The 28-pin SOIC package also supports conventional surface-mount assembly. Designers should account for RS-232's unbalanced signaling, cable-length limitations, ground-reference issues, and the need for suitable interface protection when connecting the device to external equipment. Place the device close enough to the connector to minimize the unprotected length of the RS-232 traces. Use the pin-description table in the manufacturer datasheet when assigning signals and decoupling pins. If the system also uses RS-485, RS-422, or USB, select the corresponding interface IC rather than treating an RS-232 transceiver as a universal serial-port solution. This page combines device specifications, replacement guidance, pin and application considerations, and parameter-level comparisons to support engineering selection and PCB implementation. Use the Request a Quote form for current commercial availability, lead time, and sourcing support.

RFQ Contact