Microcontrollers

Products (20,000+)

BCM47063SO01 - 3x3 11N FE WLAN Chipset | Broadcom
BCM47063SO01

BCM47063SO01 - 3x3 11N FE WLAN Chipset | Broadcom

Broadcom BCM47063SO01 is a 3 x 3 11N FE WLAN chipset classified as an embedded microprocessor and supplied in a tray package. The verified product information identifies the BCM47063 series as a wireless LAN chipset for embedded networking equipment. The BCM47063SO01 ordering code is associated with Broadcom Limited, formerly identified in some listings as Avago Technologies, and is offered by multiple electronics distributors. A WLAN chipset is an embedded semiconductor platform that integrates wireless networking functions for a connected product. Within the product hierarchy, the device belongs to the embedded microprocessor category and ultimately the broader integrated-circuit and semiconductor families. The designation 11N identifies the wireless generation represented by the product, while 3 x 3 describes the published configuration associated with the chipset. The supplied distributor records do not expose the complete radio, antenna, interface, memory, and software requirements. The principal verified feature is the BCM47063SO01's 11N FE WLAN chipset architecture in a compact 3 x 3 configuration. The part is offered with a standard base product number of BCM47063, and one distributor lists the device as RoHS3 compliant. The ordering information identifies tray packaging, while other distributor pages provide purchasing, stock, and cross-reference links. No authoritative manufacturer datasheet was included in the verified search results, so electrical ratings and RF performance remain unconfirmed. As an embedded wireless platform, the BCM47063 series is associated with routers, gateways, access points, and other network equipment requiring 11N-class WLAN connectivity. Such equipment generally requires coordinated support from memory, Ethernet interfaces, clocks, power supplies, radio-frequency components, antenna paths, and embedded software. Because the available records identify the BCM47063 family but do not provide a detailed pin list, no unsupported claim is made about processor architecture, CPU core, RAM, flash, radio bands, or transceiver performance. A key procurement consideration is that the SO01 suffix may identify a specific orderable configuration, but the supplied results do not include a manufacturer ordering guide explaining every suffix. Engineers should therefore compare the complete BCM47063 ordering information, firmware support, regulatory certification, and end-product requirements before releasing a production design. The listing descriptions alone are not sufficient to approve a new router or access-point design. This page consolidates the verified Broadcom identity, 11N FE WLAN chipset classification, 3 x 3 configuration, tray packaging, RoHS3 statement, distributor availability records, and unresolved engineering data into one engineering-oriented reference. It deliberately distinguishes documented information from missing electrical, pinout, pricing, and lifecycle details so procurement and design teams can identify the verification work still required before qualification.

RFQ Contact
BCM47081SE03 - 2+2GE 11n/11ac WLAN SoC | Broadcom
BCM47081SE03

BCM47081SE03 - 2+2GE 11n/11ac WLAN SoC | Broadcom

The Broadcom BCM47081SE03 is a 2+2 Gigabit Ethernet WLAN chipset supporting 802.11n and 802.11ac, supplied as a microprocessor IC and identified by distributor listings as an RF system-on-chip. The verified product information establishes the integrated 2+2 Gigabit Ethernet configuration and dual-generation 11n/11ac WLAN capability, but it does not provide a package designation, pin map, core frequency, memory configuration, operating voltage, or detailed radio specifications. A WLAN chipset is an integrated semiconductor platform that combines wireless LAN connectivity with processor and Ethernet functions. In the network-device hierarchy, it sits below the broader category of wireless network controllers and system-on-chip devices. The BCM47081SE03 is therefore intended for embedded networking equipment where multiple Gigabit Ethernet ports and dual-band-capable 802.11n/802.11ac support are required within one communications platform. The principal verified feature is the 2+2 Gigabit Ethernet arrangement, which distinguishes this device from basic Wi-Fi-only embedded chips. Its support for both 802.11n and 802.11ac allows it to address legacy and higher-throughput Wi-Fi clients across consumer, enterprise-access, and service-provider equipment. Broadcom markets the device as a WLAN chipset, while distributor records place it in the microprocessor and network-controller categories. The available listings provide only abbreviated technical descriptions. They do not disclose the processor core, RAM, flash interface, radio bands, antenna interfaces, regulatory approvals, pin assignments, package dimensions, or operating-temperature limits. Consequently, those values are intentionally marked as unavailable rather than inferred from the part number or comparable Broadcom devices. A complete hardware design should use the exact manufacturer documentation supplied by Broadcom under an appropriate confidentiality agreement. Typical implementation areas include wireless routers, gateways, set-top boxes, smart-home access points, and embedded dual-band networking equipment. The integrated 2+2 Ethernet configuration can reduce the need for separate Ethernet interface devices when a board design calls for two wired Gigabit connections alongside WLAN support. Exact suitability still depends on the unavailable driver, interface, regulatory, and hardware documentation. The main design precaution is to obtain the controlled Broadcom documentation before committing PCB resources. Because the public listings do not identify the package or pinout, board layout, power sequencing, antenna integration, thermal design, and software enablement cannot be validated from the supplied evidence alone. This page consolidates verified distributor descriptions, current availability references, sourcing information, and application guidance for BCM47081SE03. It also distinguishes confirmed specifications from unavailable technical details so engineers can make a responsible preliminary sourcing and design assessment.

RFQ Contact
BCM47081SF03 - 2+2 802.11ac WLAN SoC | Broadcom
BCM47081SF03

BCM47081SF03 - 2+2 802.11ac WLAN SoC | Broadcom

Broadcom BCM47081SF03 is a 2+2 Gigabit Ethernet WLAN chipset system-on-chip supporting 802.11n and 802.11ac wireless networking. The supplied distributor data identifies the device as a microprocessor IC and specifically describes it as a 2+2 GE WLAN chipset (11n+11ac). These four verified capabilities place it in the broader wireless LAN controller category, where integrated processing and radio-network connectivity support routers, gateways, access points, and similar networking equipment. A wireless LAN SoC is an embedded semiconductor that combines one or more processor functions with dedicated networking and radio-interface logic. Within the product hierarchy, this BCM47081 device is a wireless network controller, embedded microprocessor, system-on-chip, and integrated circuit. Its 2+2 radio configuration supports two spatial streams, while 802.11n and 802.11ac provide the stated WLAN standards required for dual-band Wi-Fi networking systems. The principal verified features of the BCM47081SF03 are its 2+2 radio configuration, 2+2 Gigabit Ethernet WLAN chipset classification, and support for both 802.11n and 802.11ac. These specifications distinguish it from basic single-stream or legacy-only wireless controllers. For equipment designers, the combination indicates a device intended to handle wireless LAN connectivity in comparatively demanding access-point and router platforms. Technically, the chipset integrates embedded processing with WLAN functionality rather than operating only as a simple radio transceiver. The verified distributor listing classifies BCM47081SF03 as a microprocessor IC, while Mouser describes it as an RF system-on-chip. These descriptions support its use as the network-processing centerpiece of a wireless networking product, although processor architecture, clock rate, memory interfaces, radio bands, and firmware details are not present in the supplied source material. Typical applications include dual-band Wi-Fi routers, residential gateways, enterprise wireless access points, and network-attached storage systems using an 802.11ac-capable WLAN chipset. The device may also be evaluated for embedded networking appliances where a 2+2, dual-standard wireless LAN implementation is required. Selection should include verification of the complete datasheet, package drawing, pinout, regulatory approvals, antenna interface, and Broadcom firmware support for the intended product. The most important design step is to obtain the manufacturer documentation before PCB layout because the supplied data does not state the package type, pin count, exposed-pad arrangement, or physical dimensions. Designers should also confirm operating voltage, Ethernet interface details, supported memory, radio front-end requirements, and thermal conditions rather than infer them from the distributor descriptions. A board-level replacement is not interchangeable unless its package, pinout, electrical characteristics, radio interface, and firmware environment all match. This product record combines verified distributor descriptions, availability sources, purchasing information, and cautious engineering guidance. It distinguishes confirmed 2+2 802.11n/802.11ac chipset characteristics from unverified details, helping engineers identify the correct BCM47081SF03 documentation and evaluate replacement options without treating generic cross-reference results as proof of drop-in compatibility.

RFQ Contact
BCM47081SG03 - 2+3 GE WLAN 11n+11ac SoC | Broadcom
BCM47081SG03

BCM47081SG03 - 2+3 GE WLAN 11n+11ac SoC | Broadcom

The Broadcom BCM47081SG03 is an RF system-on-chip (SoC) for embedded wireless networking applications, identified by the verified product description as a 2+3 GE WLAN solution supporting 11n and 11ac wireless LAN operation. The part is listed by Broadcom and Avago Technologies distributor records as a microprocessor IC with a Broadcom RF SoC architecture. The available verified source data does not publish the processor core, clock rate, memory configuration, radio bands, antenna interfaces, operating temperature, or exact package dimensions. A wireless SoC combines multiple functions that are normally implemented as separate devices. For this BCM47081SG03, the verified description identifies the product as a 2+3 GE WLAN SoC, with 11n and 11ac support. The 2+3 GE designation is retained exactly as supplied in the distributor records; detailed interpretation of the GE interface arrangement requires the manufacturer datasheet, which was not included in the verified data. The BCM47081SG03 is intended for embedded routers, gateways, wireless access equipment, and other network products requiring integrated 11n/11ac wireless LAN functionality. Its RF SoC classification indicates that the device includes wireless network processing and radio-related functions in one component, reducing the need for separate wireless interface components in the completed product. The verified distributor listings also identify the part as a Broadcom RF System on Chip. Designers should treat the BCM47081SG03 as a highly application-specific component rather than a general-purpose microcontroller. The verified records provide the MPN, Broadcom identity, SoC description, 2+3 GE WLAN designation, 11n and 11ac support, RoHS3 compliance, tray packaging, and distributor availability. They do not provide verified values for pinout, package type, electrical ratings, memory, firmware support, host interfaces, RF certification, or lifecycle status. Before placing this device in a new design, obtain the applicable Broadcom datasheet and confirm the exact package, exposed-pad requirements, pin multiplexing, supply rails, clocking, boot interface, memory support, and regulatory requirements. Those details cannot be safely inferred from a distributor category label. The available information is sufficient for initial sourcing and product-family identification, but not for schematic capture or PCB layout. This page consolidates the verified distributor descriptions, package-format information, sourcing links, and available technical identifiers for BCM47081SG03. It is intended to support engineers evaluating the part for 11n/11ac embedded wireless networking designs while clearly separating confirmed information from manufacturer-document details that still require verification.

RFQ Contact
BCM47081SL01 - 2+3GE 11n+11ac WLAN SoC | Broadcom
BCM47081SL01

BCM47081SL01 - 2+3GE 11n+11ac WLAN SoC | Broadcom

Broadcom BCM47081SL01 is an RF system-on-chip and WLAN chipset combining 2+3 Gigabit Ethernet connectivity with 11n and 11ac wireless operation. The verified distributor information identifies this device as a Broadcom networking SoC rather than a general-purpose microprocessor, making it suitable for integrated wireless LAN and multi-gigabit Ethernet equipment. Its package, pin arrangement, core frequencies, memory interfaces, regulatory domains, and detailed electrical limits are not available in the supplied source data and must be confirmed in the manufacturer datasheet before PCB design or production use. A system on chip, or SoC, combines multiple functional blocks such as processors, connectivity controllers, radio interfaces, memory interfaces, and security functions into one integrated device. Within the networking hierarchy, an RF WLAN SoC sits between a discrete processor and a standalone radio, allowing a router, gateway, or access point to reduce component count and simplify board integration. The BCM47081SL01 is specifically identified by Broadcom distributor records as a 2+3GE WLAN chipset supporting 11n and 11ac, combining legacy and faster wireless modes with Gigabit Ethernet-class connectivity. The principal verified feature set includes a 2+3GE Ethernet arrangement, dual-mode 11n and 11ac WLAN support, and an RF system-on-chip architecture. These capabilities position the chipset for home networking, broadband gateways, Wi-Fi access points, and embedded network appliances. The 11ac designation indicates support for the 5 GHz-era wireless standard, while 11n coverage supports established 2.4 GHz and 5 GHz WLAN deployments. The source snippets do not provide channel widths, spatial-stream counts, antenna interfaces, regulatory approvals, or throughput figures, so none are inferred here. BCM47081SL01 is typically integrated into a complete networking platform rather than used alone. Surrounding circuitry includes power supplies, memory, Ethernet magnetics, clocks, RF front-end components, antennas, and configuration interfaces. Its exact memory architecture and I/O requirements cannot be stated from the verified excerpts. Designers should therefore treat the listed 2+3GE and 11n+11ac capabilities as verified device-level facts, while obtaining the complete Broadcom datasheet and reference design before selecting regulators, decoupling, clocking, and PCB land patterns. Typical uses include residential routers, broadband CPE equipment, dual-band wireless access points, and other network appliances that combine wired Gigabit Ethernet with Wi-Fi. The 2+3GE designation may support high-speed network paths, but the exact mapping between 2.5 GbE and 3 GbE interfaces, PHY integration, and external-component requirements remains unverified. Likewise, the 11ac feature does not by itself specify client rate, port count, antenna count, or regulatory compliance. The critical design action is to obtain an authorized Broadcom datasheet and hardware design package before layout. Do not infer a BGA pinout, power pin arrangement, RF routing geometry, or exposed-pad requirements from generic SoC practice. Confirm reference clock sources, DDR or flash interfaces, Ethernet magnetics support, boot configuration, debug access, firmware constraints, and decoupling directly from controlled Broadcom documentation. This page consolidates the verified Broadcom product description, distributor sourcing information, and cautious application guidance while explicitly separating known facts from unavailable data. It also records the absence of independently verified pin-to-pin substitutes, avoiding unsupported drop-in claims for a highly integrated, firmware-dependent WLAN chipset.

RFQ Contact
BCM47083SA03 - 3+3 11ac WLAN SoC | Broadcom
BCM47083SA03

BCM47083SA03 - 3+3 11ac WLAN SoC | Broadcom

Broadcom BCM47083SA03 is a 3+3 Gigabit Ethernet WLAN chipset supporting 11ac and identified by the verified distributor data as an RF system-on-chip in the network-controller and processor-IC category. The available source information identifies the device as a Broadcom Limited embedded microprocessor product, while one distributor listing describes it as a 3+3 GE WLAN chipset with 11ac capability. The verified record also identifies a tray package configuration and a manufacturer or distributor datasheet reference named BCM47083SA03.pdf. Detailed electrical ratings, processor architecture, memory configuration, radio interfaces, pin mapping, operating-temperature limits, and package dimensions are not included in the supplied source data and therefore require confirmation from the original manufacturer documentation. A WLAN chipset combines wireless LAN connectivity, Ethernet-facing networking functions, and embedded processing into a single platform. In the product hierarchy, BCM47083SA03 is an embedded microprocessor and RF system-on-chip, and it is associated with network controllers, wireless LAN devices, and Gigabit Ethernet networking equipment. The 3+3 designation indicates three-plus-three Gigabit Ethernet and 11ac positioning as stated by the supplied distributor records, but it should not be interpreted as a complete specification of antenna count, spatial streams, or radio bands without the original datasheet. The supplied records provide sourcing metadata rather than a complete electrical characterization. DigiKey lists the component under Broadcom Limited with orderable part number BCM47083SA03 and distributor part number BCM47083SA03-ND. Mouser Canada describes the same part as an RF System on Chip and 3+3 GE WLAN chipset with 11ac. Other listings classify it under embedded microprocessors and RF system-on-chip categories. These consistent descriptions make it suitable for preliminary design research into wireless routers, gateways, and similar connected equipment, provided the designer validates pin compatibility, radio certification, firmware support, and supply availability. A key design consideration is that BCM47083SA03 appears to be a specialized connected-product component rather than a general-purpose microcontroller. A replacement cannot be selected from a generic 32-bit processor list: the complete package, pinout, Ethernet integration, radio interfaces, firmware dependencies, and regulatory requirements must match. The verified cross-reference search did not identify a defensible drop-in replacement, so no substitute MPN is claimed on this page. Because the package pin count and public pin names are absent from the supplied data, the pinout is reported as unavailable rather than inferred. This page consolidates verified distributor descriptions, sourcing links, application context, and engineering selection guidance that are not available from a single catalog snippet. It also explicitly separates confirmed facts from parameters that still require the manufacturer datasheet, helping procurement and hardware teams avoid treating incomplete distributor metadata as a complete design reference.

RFQ Contact
BCM47083SB03 - 3+3 GE 11n/11ac WLAN SoC | Broadcom
BCM47083SB03

BCM47083SB03 - 3+3 GE 11n/11ac WLAN SoC | Broadcom

Broadcom BCM47083SB03 is an RF system-on-chip (SoC) and WLAN chipset identified by the verified listings as a 3+3 Gigabit Ethernet configuration supporting both 802.11n and 802.11ac. It is positioned as an embedded processor solution for networking equipment requiring combined wireless LAN and wired Ethernet connectivity. The available distributor data confirms the device family, manufacturer, MPN, wireless standards, and Gigabit Ethernet configuration, but it does not publish a complete electrical specification table. An RF system-on-chip integrates multiple radio and digital processing functions into one semiconductor device. In this product category, an embedded WLAN chipset connects a router, gateway, access point, or similar network appliance to wireless clients while coordinating Ethernet traffic within the same embedded platform. The BCM47083SB03 designation specifically identifies a 3+3 GE WLAN chipset supporting 11n and 11ac operation. The verified source information highlights three primary attributes: the BCM47083SB03 MPN, support for 802.11n plus 802.11ac, and a 3+3 Gigabit Ethernet WLAN chipset configuration. These features place the component in the connected-device and networking-equipment market. Broadcom / Avago is the manufacturer branding shown by Mouser, while other authorized-marketplace listings identify the part under Broadcom Limited. Because these integrated wireless processors normally contain sensitive radio, firmware, and platform-specific functions, designers should evaluate the complete Broadcom documentation, board support package, supported radio components, and reference designs before committing a layout. The supplied search results include distributor datasheet and technical-support links, but they do not expose verified processor frequency, core architecture, memory capacity, radio output power, channel bandwidth, security features, pin count, package dimensions, or electrical limits. Typical design uses include dual-band or multi-standard wireless routers, enterprise access points, residential gateways, smart-home hubs, and network appliances that need both Wi-Fi connectivity and Gigabit Ethernet interfaces. Those applications are justified by the verified 11n/11ac and 3+3 GE descriptions, although the exact port arrangement, antenna interface, regulatory approval, and supported operating bands must be confirmed from the manufacturer documentation for the intended product configuration. A key design caution is that chipset compatibility extends beyond matching the radio standard. The PCB stack-up, antenna matching network, RF layout, power supplies, clocks, memory interface, boot configuration, firmware, and regulatory certification all affect operation. A replacement should therefore be treated as drop-in only after its package, pinout, electrical ratings, radio calibration, firmware support, and board requirements have been independently verified. This page consolidates the verified distributor descriptions, available sourcing links, pricing limitations, and engineering cautions for BCM47083SB03. It also distinguishes documented facts from missing specifications and does not present unverified package, pin, performance, or replacement claims as confirmed facts.

RFQ Contact
BCM47093SA03 - 802.11n Processor IC | Broadcom
BCM47093SA03

BCM47093SA03 - 802.11n Processor IC | Broadcom

Broadcom BCM47093SA03 is an embedded microprocessor IC identified as an Intensifi Gigabit Ethernet and Draft 802.11n processor. It is intended for network equipment that combines wireless networking with wired Ethernet connectivity. The component is supplied by Broadcom under the exact orderable MPN BCM47093SA03, and distributor records classify it as a microprocessor IC. An integrated wireless network processor is a specialized type of embedded processor that executes networking software, controls radio and Ethernet interfaces, and manages traffic between local clients and an upstream network. Its functional hierarchy extends from an embedded microprocessor to a system-on-chip, network processor, and connected-device semiconductor. This makes BCM47093SA03 relevant to routers, gateways, access points, and other products requiring integrated Gigabit Ethernet and 802.11n networking. The principal documented feature of BCM47093SA03 is its Draft 802.11n wireless-networking capability alongside Gigabit Ethernet processing. Draft 802.11n connectivity allows compatible equipment to combine wireless and wired networking functions in one system. The exact processor core, clock rate, memory capacity, radio integration details, and operating limits are not established by the manufacturer datasheet excerpt cited in the product records and should therefore be confirmed before schematic or firmware decisions are finalized. The BCM47093 family is associated with Broadcom's Intensifi platform for integrated networking products. In such systems, a network processor can coordinate Ethernet traffic, wireless-medium access functions, protocol processing, and host-side networking services. This architecture can reduce the number of separate controllers required in a network appliance, although final RF design, antenna implementation, regulatory approval, and antenna selection remain the responsibility of the product manufacturer. Typical uses include residential dual-band routers, wireless gateways, broadband customer-premises equipment, mesh-networking nodes, and embedded Ethernet appliances. In these applications, BCM47093SA03 can serve as the principal communications controller when the surrounding design also supplies suitable memory, power, clock, Ethernet magnetics, radio circuitry, flash storage, and required firmware. A primary design consideration is firmware and platform validation. Confirm that the Broadcom SDK, board support package, network driver, regulatory configuration, and security updates apply to the exact BCM47093SA03 ordering option. Also verify the manufacturer's pin description and package drawing before assigning PCB nets; these details must not be inferred from the BCM4705 or BCM4709 family labels because related processor numbers can use different interfaces or package arrangements. This product page combines the exact Broadcom MPN, distributor product records, availability channels, technical comparison fields, application guidance, and design cautions in one engineering-oriented reference. It highlights what is established for BCM47093SA03 while directing firmware, package, and layout decisions to the applicable Broadcom documentation and authorized product channels.

RFQ Contact
BCM47452SN01 RF System on Chip | Broadcom
BCM47452SN01

BCM47452SN01 RF System on Chip | Broadcom

Broadcom BCM47452SN01 is an RF system-on-chip solution combining the BCM47452 processor with BCM43570E and BCM54210E devices in one Broadcom wireless-connectivity offering. The manufacturer product listing identifies it specifically as an RF system on chip, while distributor records classify it under embedded system-on-chip components. Its package type, pin count, operating frequencies, memory configuration, power ratings, and environmental limits are not stated in the available product records. A radio-frequency system on chip, or RF SoC, combines digital processing, radio control, and connectivity functions within a single semiconductor platform. In the broader semiconductor hierarchy, an RF SoC belongs to the integrated-circuit and wireless-connectivity domains. Its practical value comes from integrating functions that would otherwise require several discrete chips, thereby reducing interconnections, board area, and the software and hardware coordination needed to operate a connected product. The BCM47452SN01's defining feature is its integrated connectivity architecture. The listed BCM47452 core is paired with BCM43570E and BCM54210E devices, creating a platform associated with wireless networking and embedded connectivity. The exact division of radio, Ethernet, control, and interface functions requires confirmation from the manufacturer datasheet. In particular, engineers should not infer supported wireless bands, port counts, protocols, or transceiver performance from the part number alone. Because this component combines multiple Broadcom devices, it belongs to the class of highly integrated embedded wireless platforms rather than general-purpose microcontrollers. Such devices commonly coordinate firmware, network traffic, radio operation, host interfaces, and external memory. They are normally designed for embedded connectivity products where a controlled hardware and software stack is more valuable than a broad collection of general-purpose peripherals. Potential applications include embedded wireless routers, connected gateways, industrial network equipment, and other products requiring Broadcom's integrated wireless-connectivity architecture. In these systems, the BCM47452SN01 can serve as the central connectivity processor when its documented interfaces, memory, firmware support, and regulatory requirements match the product design. Ethernet companion options such as DP83867IRRGZR may be considered in related equipment, but the final architecture must follow the device's documented reference connections. The primary design consideration is verification. Before schematic capture or PCB layout, obtain the manufacturer datasheet and confirm pin assignments, exposed-pad requirements, power rails, clocking, boot configuration, memory interfaces, RF routing, decoupling, and thermal conditions. These details determine whether BCM47452SN01 is appropriate for the intended enclosure, antenna system, compliance region, and operating environment. This product page consolidates the confirmed Broadcom device composition, distributor classification, sourcing references, and engineering-selection questions. It also distinguishes documented facts from parameters that require manufacturer confirmation, helping engineers evaluate BCM47452SN01 without assuming unstated electrical, package, or pin-level details.

RFQ Contact
BCM55030SF01 Broadcom SoC for Embedded Systems
BCM55030SF01

BCM55030SF01 Broadcom SoC for Embedded Systems

The Broadcom BCM55030SF01 is an embedded System on Chip (SoC) identified in the manufacturer and distributor records as the BCM55030 combined with BCM54640 functionality. It is categorized as an integrated semiconductor device intended for embedded connectivity and control systems. The exact electrical ratings, processor configuration, memory capacity, transceiver characteristics, pin count, package dimensions, and environmental limits are not stated in the available manufacturer-facing references for this ordering code, so those values should be confirmed against the Broadcom product documentation before design release. An SoC combines multiple functional blocks on one semiconductor device. In embedded networking equipment, an SoC may integrate a processor, memory interfaces, communications controllers, and supporting peripherals to reduce component count and simplify a board design. The BCM55030SF01 designation specifically appears in connection with BCM55030 and BCM54640, indicating a specific Broadcom device ordering code rather than a generic discrete component. Its system-level integration can help designers standardize platforms across gateway, access, and industrial networking products, but the exact interface set must be checked for each revision. The BCM55030SF01 is listed by Broadcom as a System on Chip (SOC) IC. Distributor catalog records also classify the part as an embedded SoC and identify Broadcom as the manufacturer. This classification is the key technical fact available for initial component selection. Before assigning this device to a PCB, engineers should verify the package drawing, pin assignment, power architecture, required clocking, boot interface, Ethernet or other network interfaces, and recommended external components in the appropriate Broadcom datasheet. Typical engineering uses include embedded network appliances, access equipment, industrial controllers, and communication systems that require a highly integrated Broadcom platform. The device may be considered when a design needs the BCM55030 and BCM54640 feature combination in one ordering code. Suitability depends on matching the available interface set, performance requirements, software support, operating-temperature range, and lifecycle expectations to the target product. For PCB design, preserve the package-specific land pattern, provide the required power and decoupling networks, and follow the reference clock and reset guidance in the manufacturer documentation. For software, verify the supported boot flow, firmware image format, device-tree or board-support-package requirements, and peripheral pin multiplexing. Do not infer register compatibility from the BCM55030 or BCM54640 names alone; use the exact BCM55030SF01 documentation for the production design. This page organizes the confirmed Broadcom identity, the BCM55030 plus BCM54640 device description, catalog sources, commercial request path, and design questions engineers should resolve. It is intended to support early sourcing and engineering review while directing final footprint, electrical, and qualification decisions to the exact manufacturer documentation.

RFQ Contact
BH67F5362A - 24-bit Delta-Sigma A/D LCD Flash MCU | Holtek
BH67F5362A

BH67F5362A - 24-bit Delta-Sigma A/D LCD Flash MCU | Holtek

The Holtek Semiconductor BH67F5362A is a high-performance 8-bit RISC Flash microcontroller with an integrated 24-bit Delta-Sigma analog-to-digital converter and an LCD driver, engineered for high-precision measurement products such as electronic scales, blood pressure meters, clinical thermometers, and industrial meters. It supports a system clock up to 16 MHz delivering up to 0.25 µs instruction cycle at VDD = 5 V, and is housed in an LQFP-64 package (10 mm × 10 mm, 0.5 mm pitch). Wide operating voltage from 1.8 V to 5.5 V at 8 MHz scales up to 3.3 V–5.5 V at 16 MHz, and the part integrates multi-programmable Flash program memory, RAM data memory, and true EEPROM for non-volatile calibration and serial-number storage. A microcontroller with an integrated 24-bit Delta-Sigma ADC is part of the precision-measurement MCU category, which sits hierarchically within MCU -> microcontroller -> embedded controller -> semiconductor. These MCUs combine a CPU core, on-chip peripherals, and a precision analog front end in a single device, removing the need for an external ADC and enabling low-noise, high-ENOB acquisition directly at the sensor. Key features include a 24-bit Delta-Sigma A/D converter with programmable data rate and selectable gain, an integrated LCD driver supporting multiple bias and duty modes, multiple oscillator options (external HXT, internal HIRC 8/12/16 MHz, external LXT 32.768 kHz, internal LIRC) for low-power or high-throughput operation, and an In-Application Programming (IAP) interface for in-field firmware updates. Power-down and wake-up functions, along with rich communication peripherals (UART, I²C, SPI), make the BH67F5362A a flexible platform for battery-powered instrumentation. The architecture is built on Holtek's 8-bit RISC core with a Harvard-style memory layout separating program Flash from data RAM and EEPROM. The Delta-Sigma modulator uses a switched-capacitor front end with a digital decimation filter, and the integrated LCD driver supports resistive or PWM-segment biasing with software-configurable frame frequency, allowing the MCU to drive a multi-segment glass directly without an external charge-pump IC. Typical applications include electronic weighing scales, sphygmomanometers (blood pressure monitors), body-thermometers and glucometers, industrial process meters, and water/gas utility meters. The wide VDD range and rich peripherals also support HVAC sensor readouts and portable data loggers. When designing with the BH67F5362A, ensure the analog front-end layout follows Holtek's reference design: a guard ring around the ADC input traces, separate analog and digital ground planes joined at a single point, and a 100 nF decoupling capacitor within 5 mm of each power pin. Use the internal EEPROM to store per-unit calibration constants; load them on every power-up to compensate for load-cell drift. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, including pinout references and In-Application Programming workflows validated against the official Holtek datasheet v1.10.

RFQ Contact
BH67F5372A - 24-Bit ADC LCD Flash MCU | Holtek Semiconductor
BH67F5372A

BH67F5372A - 24-Bit ADC LCD Flash MCU | Holtek Semiconductor

The Holtek Semiconductor BH67F5372A is a 24-bit Delta-Sigma A/D LCD Flash microcontroller built on an 8-bit high-performance RISC architecture, packaged in an LQFP-64 housing. It integrates a multi-channel 12-bit A/D converter, an analog comparator, a 24-bit Delta-Sigma A/D converter with programmable gain amplifier, a built-in LCD driver, and flexible Timer Modules supporting timing, pulse generation, and PWM functions. The integrated 24-bit Delta-Sigma ADC is designed for high-precision differential measurement of low-frequency analog signals. What is an A/D Flash MCU? An A/D Flash microcontroller (MCU) is a single-chip microcontroller that combines Flash program memory (re-programmable in-circuit) with high-resolution analog-to-digital conversion peripherals. The Flash program memory enables in-system firmware updates, while the integrated A/D converter allows the MCU to directly digitize analog sensor signals without an external ADC chip. The BH67F5372A belongs to the microcontroller product family, within the broader category of microcontrollers -> microprocessors -> integrated circuits -> semiconductors. Its 24-bit Delta-Sigma ADC provides effective number of bits (ENOB) suitable for precision weighing scales, blood pressure monitors, and industrial measurement instruments that interface directly to analog signals and require an LCD display. Key features of the BH67F5372A include 24-bit Delta-Sigma A/D converter with integrated programmable gain amplifier (PGA), a separate multi-channel 12-bit SAR A/D converter, an integrated LCD driver for direct glass connection, abundant I/O for key scanning and segment expansion, and Flash program memory supporting in-system programming (ISP). Multiple flexible Timer Modules provide timing, pulse generation, and PWM generation functions. Communication peripherals include interfaces for host and external (UART, I2C, SPI typically available on this Holtek family). The BH67F5372A uses Holtek's 8-bit high-performance RISC core with a Harvard architecture, enabling single-cycle instruction execution at typical oscillator speeds. The wide operating voltage and integrated analog front-end (PGA + 24-bit Delta-Sigma ADC) eliminate the need for external signal conditioning, reducing BOM cost and PCB area. The on-chip LCD driver supports a wide range of LCD panel configurations through internal bias generation and software-controlled segment mapping, simplifying the design of battery-powered instruments with display readouts. Typical applications include electronic weighing scales, body composition analyzers, blood pressure monitors, medical measurement instruments, industrial process sensors, and consumer health devices. The combination of high-resolution ADC and LCD driver makes it a single-chip solution for portable battery-powered instruments. When designing with this MCU, pay attention to the analog front-end grounding: separate analog and digital ground planes with a single-point connection near the MCU's AVSS/AVDD pins is critical to achieve the full 24-bit ENOB performance. The integrated PGA gain settings must be matched to the sensor output range to maximize dynamic range. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. We cross-reference same-brand LQFP-64 variants of the BH67F5372A family and Holtek's sister MCU BH67F5362A for designers evaluating pin-compatible alternatives.

RFQ Contact
BSC9131NJE1HHHB - QorIQ Qonverge SoC, 800MHz e500 + StarCore | NXP
BSC9131NJE1HHHB

BSC9131NJE1HHHB - QorIQ Qonverge SoC, 800MHz e500 + StarCore | NXP

The NXP (formerly Freescale) BSC9131NJE1HHHB is a QorIQ Qonverge heterogeneous SoC that pairs an 800 MHz Power Architecture e500 microprocessor core with an 800 MHz StarCore SC3850 DSP core and a MAPLE-B2F baseband accelerator, housed in a 520-pin FCBGA (21x21 mm) package and rated for the -40C to +105C industrial/extended temperature range. A QorIQ Qonverge SoC is a heterogeneous communications processor that combines a control-plane general-purpose CPU, a signal-processing DSP core, and hardware acceleration for baseband or packet processing in a single die. The BSC9131 specifically targets small-cell wireless base stations and other line-card applications where latency-sensitive control and high-throughput DSP must coexist on one chip, simplifying board design versus a discrete CPU + DSP architecture. Key features include: 1x e500 core at 800 MHz for control-plane code, 1x SC3850 StarCore DSP at 800 MHz for PHY/baseband processing, an integrated MAPLE-B2F baseband accelerator, DDR3 memory controller with ECC, integrated SEC (Security Engine) for IPsec/cryptographic offload, dual 10/100/1000 Ethernet MACs, multiple SerDes lanes for SGMII/PCIe, and a temperature range of -40C to +105C. The 520-pin FCBGA package exposes the full SerDes, Ethernet, DDR3, and JTAG interfaces needed for small-cell line cards. Architecturally, the e500 core runs the control-plane operating system and management stack while the SC3850 + MAPLE-B2F combination offloads L1/L2/L3 baseband DSP and Turbo/FFT operations, reducing overall BOM and power versus two discrete chips. SEC hardware accelerates encryption/decryption for secure backhaul links. Typical applications include small-cell LTE/eNodeB base stations, enterprise VoIP gateways, smart-grid control nodes, and defense/industrial signal-processing platforms that need combined control + DSP on one SoC. When designing with this device, plan PCB layout for the 520-ball FCBGA carefully - 0.8 mm or finer pitch BGA escape routing, controlled-impedance SerDes traces, and a multilayer stack-up with dedicated ground/power planes are required for signal integrity on DDR3 and SGMII links. This page synthesizes distributor pricing, lifecycle status, and design considerations beyond the manufacturer datasheet, helping engineers evaluate the BSC9131NJE1HHHB for current and legacy designs.

RFQ Contact
BSC9131NJE7HHHB 800MHz QorIQ SoC | NXP | Communications
BSC9131NJE7HHHB

BSC9131NJE7HHHB 800MHz QorIQ SoC | NXP | Communications

The NXP BSC9131NJE7HHHB is a QorIQ Qonverge system-on-chip with an 800 MHz StarCore SC3850 DSP, an 800 MHz Power e500 CPU, a MAPLE-B2F accelerator, and DDR3 support in a 520-FCBGA package measuring 21 mm by 21 mm. It targets small-cell base stations, enterprise VoIP, smart-grid control, military and defense, and industrial systems. Its integrated architecture combines general-purpose control, specialized DSP processing, and accelerator resources while operating from -40°C to +105°C. A QorIQ Qonverge SoC is a highly integrated communications processor that consolidates one or more processor cores, memory interfaces, security functions, accelerators, and dedicated communications resources into one semiconductor device. Such devices sit between general-purpose microprocessors and dedicated digital signal processors: they provide software-configurable real-time processing for packet handling, baseband workloads, voice systems, and control tasks without requiring several separate chips. The verified product information identifies an 800 MHz StarCore SC3850 core, an 800 MHz Power e500 CPU core, and MAPLE-B2F specialist DSP acceleration. It also identifies DDR3 memory support and SEC security capability. The BSC9131 is therefore suited to systems that combine control-plane processing with throughput-intensive communications or signal-processing work. Its operating-temperature range of -40°C to +105°C supports industrial and defense-oriented environments, although individual system qualification remains necessary. The package is a 520-FCBGA, 21 mm by 21 mm component. Such a large ball-grid package supports the device's extensive processor, accelerator, memory, and I/O resources but demands careful PCB escape routing, multilayer interconnect, power delivery, and thermal design. The verified data does not provide core voltages, cache sizes, memory width, I/O counts, power limits, pin names, or ball assignments, so these details must be confirmed in the official NXP documentation before schematic capture or layout. Typical deployments include small-cell base-station processing, enterprise VoIP equipment, smart-grid controllers, industrial automation systems, and military or defense platforms. Its value is architectural integration: software can allocate work among the e500 CPU, StarCore DSP, and MAPLE-B2F accelerator instead of requiring separate processors connected through external interfaces. This can reduce board-level component count while preserving specialized throughput. For new PCB designs, treat the 520-FCBGA as a complex system-in-package-scale device requiring controlled power sequencing, high-speed memory routing, extensive via connectivity, and thermal analysis. Because the part is marked end of life by NXP, production continuity and software support require review of NXP's discontinuation and replacement information. This page synthesizes current distributor availability, lifecycle data, technical positioning, and sourcing constraints. Before approving a design, verify the official NXP part page and datasheet for electrical limits, memory topology, interface multiplexing, ball assignments, reference power design, and software requirements. Distributor inventory does not establish long-term availability, and an end-of-life processor may require last-time-buy planning or a redesign rather than a simple drop-in substitution.

RFQ Contact
BSC9131NJN1HHHB - 800MHz QorIQ Qonverge SoC | NXP | Small Cell
BSC9131NJN1HHHB

BSC9131NJN1HHHB - 800MHz QorIQ Qonverge SoC | NXP | Small Cell

The NXP Semiconductor (formerly Freescale) BSC9131NJN1HHHB is a highly integrated QorIQ Qonverge SoC combining a PowerPC e500 CPU core at 800 MHz, a StarCore SC3850 DSP core at 800 MHz, and a MAPLE-B2F hardware accelerator, housed in a 520-pin FCBGA (21x21 mm) package. The device is manufactured in 45 nm process technology and integrates DDR3/DDR3L memory controllers along with multiple high-speed serial interfaces targeted at small cell base stations, enterprise VoIP gateways, smart grid control nodes, and industrial control systems. A QorIQ Qonverge SoC is a heterogeneous multiprocessor system-on-chip that unifies general-purpose CPU control code, real-time DSP baseband processing, and dedicated hardware acceleration (such as MAPLE-B2F for LTE turbo/decoding) onto a single die. This architecture allows telecom OEMs to reduce board area, BOM cost, and power consumption compared to multi-chip FPGA-plus-DSP designs, while keeping the control plane and data plane tightly coupled for deterministic latency on Layer-1 baseband workloads. Key features of the BSC9131NJN1HHHB include 800 MHz dual-issue e500 CPU core, 800 MHz SC3850 VLIW DSP with dual MAC units, MAPLE-B2F accelerator for LTE turbo and Viterbi decoding, DDR3/DDR3L memory controller with ECC support, two RGMII gigabit Ethernet MACs, three multi-protocol serdes lanes (up to 3.125 GHz supporting CPRI and OBSAI for backhaul and antenna interfaces), and an industrial operating temperature range of -40 C to +105 C. The 45 nm CMOS process provides a balance of static and dynamic power for fan-less small cell enclosures. Typical applications of the BSC9131NJN1HHHB include small cell LTE/eNodeB base stations where the e500 handles L2/L3 control while the SC3850 plus MAPLE-B2F accelerate LTE turbo/Viterbi decoding in real time; enterprise VoIP media gateways benefiting from integrated DSP for echo cancellation and transcoding; smart grid substation controllers combining protocol stack (IEC 61850, DNP3) processing with deterministic DSP packet handling; and industrial defense systems requiring reliable operation across an extended thermal envelope. When designing with this device, allocate careful attention to power-rail sequencing, DDR3L termination, and thermal management of the 21x21 mm FCBGA. The device is reaching end-of-life from NXP, so plan supply continuity, second-source qualification, or last-time-buy orders with NXP or authorized distributors well in advance of PCN deadlines. When evaluating longevity, note that the BSC9131 family is targeted by NXP with a documented End-of-Life notice; migration paths should be explored through NXP QorIQ successors such as the B series or LS series communications processors depending on the workload profile. The package is not a drop-in replacement for newer QorIQ families and will require PCB and BSP rework. This page synthesizes distributor pricing, lifecycle status, application guidance, and cross-reference alternatives not found in the manufacturer datasheet alone - giving engineers and procurement teams a single reference for design decisions, sourcing, and obsolescence planning.

RFQ Contact
BSC9131NJN1HHHB557 - 800MHz QorIQ Processor | NXP
BSC9131NJN1HHHB557

BSC9131NJN1HHHB557 - 800MHz QorIQ Processor | NXP

NXP Semiconductors BSC9131NJN1HHHB557 is an 800 MHz QorIQ Qonverge multicore baseband processor housed in a 520-ball flip-chip BGA package. The verified distributor records identify it as an embedded MPU for communications processing, while the available specifications establish its processor frequency and package format. Its primary engineering value is integration: a multicore baseband processor combines general-purpose processing, accelerator interfaces, memory connectivity, and communications-oriented peripherals in one high-pin-count package. A multicore baseband processor is a system-on-chip type that executes protocol, signal-processing, and control workloads in wireless and wired baseband equipment. The BSC9131 family belongs to the broader hierarchy of embedded processor, microcontroller or MPU, communications processor, and semiconductor. Compared with a discrete processor-plus-FPGA design, integrating processing resources into one device can simplify board partitioning and reduce inter-chip data movement. The verified headline specifications are an 800 MHz operating frequency and a 520-FCBGA package. The package provides 520 electrical contact points, but the supplied data does not disclose the complete pin map, ball assignments, exposed-pad arrangement, memory map, core count, I/O voltage, thermal resistance, or maximum junction temperature. These details must be confirmed against the manufacturer datasheet before schematic capture or PCB layout is released. For a communications processor, architecture, software enablement, memory interfaces, networking interfaces, security features, and thermal performance are as important as clock frequency. The BSC9131 datasheet describes a QorIQ Qonverge multicore baseband processor family, but the supplied search extract does not provide enough detail to state individual core counts, accelerator assignments, fabric throughput, or protocol support. Software-image availability, boot configuration, clocking, memory topology, and power sequencing should therefore be validated for the exact orderable MPN. Typical uses include wireless baseband equipment, network-access infrastructure, industrial communication systems, and embedded communications platforms where high integration and deterministic external interfaces matter. A 520-FCBGA device is normally intended for multilayer PCB construction with fine-pitch routing, controlled power delivery, and careful thermal design. Hand assembly is generally impractical because ball pitch, hidden interconnects, and escape routing require advanced manufacturing capability. A primary design consideration is to preserve the exact footprint, ball map, power rails, reference clock, boot straps, and memory configuration of the qualified BSC9131NJN1HHHB557 design. Pin-to-pin alternatives should not be approved from processor frequency and package name alone; firmware, DDR topology, SerDes configuration, thermal conditions, and software support must also be reconciled. This page combines verified distributor availability, exact package information, price observations, and practical procurement guidance with the manufacturer datasheet. It also distinguishes confirmed facts from unavailable technical fields, helping engineers assess fit before committing to a complex BGA design.

RFQ Contact
BSC9131NLE7HHHB - 800MHz e500 SoC | NXP
BSC9131NLE7HHHB

BSC9131NLE7HHHB - 800MHz e500 SoC | NXP

The NXP Semiconductors BSC9131NLE7HHHB is a QorIQ Qonverge system-on-chip with one 32-bit 800 MHz PowerPC e500 core, an 800 MHz StarCore SC3850 DSP, and MAPLE-B2F accelerator processing, housed in a 520-FCBGA package measuring 21 x 21 mm. It includes DDR3 memory support, security features, and a specified 0°C to 105°C temperature range. These headline values identify it as a highly integrated communications and industrial processor rather than a general-purpose microcontroller. A QorIQ Qonverge SoC combines a general-purpose processor core, a digital signal processor, dedicated accelerator logic, memory controllers, and communications-oriented interfaces on one semiconductor device. The BSC9131 combines Power e500 and StarCore SC3850 core technologies with MAPLE-B2F specialist DSP acceleration. This hierarchy places it between a microprocessor and a specialized communications processor, allowing control-oriented code and time-critical signal processing to share one integrated platform. Key features include the single 800 MHz e500 processor core, the 800 MHz StarCore DSP, and MAPLE-B2F accelerator support. The device also provides DDR3 memory support, security capabilities identified by NXP as SEC, and a 0°C to 105°C operating-temperature specification. Its 520-ball flip-chip BGA package supports dense board-level integration, although its 520 contacts and 21 x 21 mm body require careful escape routing and board-layout verification. The architecture addresses workloads that require more specialized processing than a conventional microcontroller can provide. The PowerPC e500 core can execute operating-system-level control software, while the StarCore SC3850 core and MAPLE-B2F accelerator target DSP and communications tasks. Dividing these workloads across dedicated engines can improve suitability for base-station, packet-processing, voice-over-IP, industrial-control, and defense-related equipment, subject to software and memory-system support. Typical applications include small-cell base stations, enterprise VoIP platforms, smart-grid control systems, military and defense equipment, and industrial systems. The integrated 800 MHz e500 core, 800 MHz StarCore DSP, MAPLE-B2F acceleration, and DDR3 support align particularly well with embedded communications designs that need both general-purpose control and specialized digital signal processing in one package. The primary design constraint is package complexity. A 520-FCBGA device requires a matching land pattern, controlled escape routing, power and ground-plane integrity, and assembly-process capability. Software teams must also verify DDR3 topology, boot requirements, clocking, security configuration, thermal performance, and peripheral availability for the exact product revision before committing to production hardware. This page consolidates the verified manufacturer and distributor identity, package, processor architecture, memory support, operating range, lifecycle information, and sourcing links for BSC9131NLE7HHHB. It also distinguishes verified drop-in alternatives from unsupported cross-reference candidates so engineers can avoid assuming that a similar processor is electrically and mechanically interchangeable.

RFQ Contact
BSC9131NLN1HHHB - 800MHz e500 Processor | NXP
BSC9131NLN1HHHB

BSC9131NLN1HHHB - 800MHz e500 Processor | NXP

The NXP BSC9131NLN1HHHB is a QorIQ Qonverge system-on-chip with a 32-bit 800 MHz PowerPC e500 microprocessor core and an 800 MHz StarCore DSP in a 520-FCBGA package. The verified distributor data identifies one core, a 21 mm by 21 mm package, MAPLE-B2F acceleration, integrated IFC, DDR3 support, and a 0°C to 105°C temperature range. A system-on-chip, or SoC, integrates a processor core, memory interfaces, communications peripherals, and optional accelerators into one semiconductor package. Within the QorIQ product hierarchy, the BSC9131 combines the PowerPC e500 CPU, a StarCore DSP, MAPLE-B2F acceleration, IFC, and DDR3 support. This integration allows communications and embedded systems to execute control, signal-processing, and network workloads with one highly integrated device. The verified product data highlights an 800 MHz e500 CPU, an 800 MHz StarCore DSP, MAPLE-B2F acceleration, integrated IFC, and DDR3 memory support. These functions suit workloads that require dedicated digital signal processing alongside general-purpose network processing. The 520-FCBGA package provides a large, complex interconnect surface, so PCB escape routing, power delivery, thermal design, and manufacturing validation require careful planning. BSC9131NLN1HHHB is positioned for small-cell base stations, enterprise VoIP, smart-grid control, military and defense systems, and industrial applications. In these systems, the CPU can manage protocol and control tasks while the StarCore DSP accelerates signal-processing workloads. MAPLE-B2F acceleration provides another dedicated compute resource, while IFC and DDR3 interfaces support connected equipment and memory-intensive data paths. A critical design consideration is that a 520-FCBGA is not a low-pin-count or low-risk package. Power rails, high-speed memory routing, thermal paths, and ball-assignment verification must follow the official device documentation and validated hardware design. Do not infer compatible regulators, memory devices, or peripheral ICs from general processor specifications without checking the manufacturer data. This page consolidates verified distributor specifications, sourcing information, application context, and design cautions for BSC9131NLN1HHHB. It does not substitute for the complete NXP hardware manual, reference design, package drawing, or board-support package. Pricing reflects the supplied market observations as of 2026-10-23 and should be reconfirmed before procurement.

RFQ Contact
BSC9131NSE1KHKB - QorIQ Qonverge SoC, 1GHz e500 + SC3850 | NXP
BSC9131NSE1KHKB

BSC9131NSE1KHKB - QorIQ Qonverge SoC, 1GHz e500 + SC3850 | NXP

The NXP Semiconductors BSC9131NSE1KHKB is a QorIQ Qonverge heterogeneous SoC combining a 1 GHz PowerPC e500 core and a 1 GHz StarCore SC3850 DSP core in a 520-pin FCBGA (21x21) package, manufactured on a 45 nm CMOS process. It integrates a MAPLE-B2F baseband accelerator, DDR3/DDR3L memory controller, IFC, SEC 4.4 security engine, and dual GbE networking for small-cell base stations. The device is part of the QorIQ Qonverge BSC9131 family, designed for high-performance low-power baseband processing. A heterogeneous multiprocessor SoC integrates two or more different processor core types (in this case a PowerPC host and a DSP) plus dedicated hardware accelerators on a single die. This architecture is widely used in wireless base stations where one core runs control-plane OS tasks (Linux/VxWorks) while the DSP executes PHY-layer signal processing, allowing deterministic real-time DSP latency alongside flexible application code on the host CPU. The BSC9131NSE1KHKB specifically targets small cell, enterprise femtocell, smart grid, military/defense, and industrial control applications per NXP product documentation. Key features include a dual-core heterogeneous compute complex (1 GHz e500 at 32-bit + 1 GHz SC3850 DSP), a MAPLE-B2F turbo/Viterbi baseband accelerator, DDR3/DDR3L memory controller with ECC support, integrated SEC 4.4 security engine, integrated flash controller (IFC), dual GbE, 0-105C extended operating temperature grade, and 520-ball FCBGA packaging. Per NXP product documentation, the device is targeted at small cell base station, enterprise VoIP, smart grid control, military/defense, and industrial control applications. The BSC9131 architecture combines an e500mc-style host processor for control plane and an SC3850 DSP for PHY processing, allowing designers to run a real-time OS (Linux or VxWorks) on the e500 while dedicating the SC3850 to deterministic baseband DSP. The MAPLE-B2F accelerator offloads Turbo/Viterbi convolutional decoding, freeing DSP cycles for higher-layer PHY tasks and reducing overall system power. Typical applications include LTE/HSPA/WiMAX small cell base stations (femtocell, picocell, microcell), enterprise VoIP gateways, smart grid protection and control equipment, military/defense radio platforms, and industrial real-time control systems. The BSC9131 is typically used as the main baseband SoC with companion RF transceivers and analog front ends. When designing with this device, ensure proper thermal management via PCB copper pours and thermal vias to the FCBGA substrate. Use ECC-enabled DDR3L with matched trace lengths for the DDR interface, and validate boot configuration via the IFC/serial boot path. Power sequencing must follow NXP's reference design for proper core and I/O rail ramp order. This page synthesizes distributor inventory, drop-in NXP Qonverge alternatives, and practical design guidance not collated in the manufacturer datasheet, helping engineers evaluate lifecycle risk and second-source options for end-of-life planning.

RFQ Contact
BSC9131NSN1KHKB - QorIQ Qonverge SoC, 800MHz Dual-Core | NXP
BSC9131NSN1KHKB

BSC9131NSN1KHKB - QorIQ Qonverge SoC, 800MHz Dual-Core | NXP

The NXP (formerly Freescale) BSC9131NSN1KHKB is a QorIQ Qonverge system-on-chip (SoC) integrating a 1 GHz StarCore SC3850 DSP core, a 1 GHz PowerPC e500 processor core, and a MAPLE-B2F baseband accelerator in a single 520-pin FCBGA (21x21 mm) package. It is part of the BSC9131 family targeting small-cell base stations, enterprise VoIP gateways, smart-grid infrastructure, military/defense radios, and industrial control applications. According to NXP product documentation, the device combines heterogeneous compute elements to handle both PHY-layer digital signal processing and control-plane networking tasks on one die. A QorIQ Qonverge SoC is a heterogeneous multiprocessor device that combines a general-purpose communications control CPU (PowerPC e500) with one or more DSP cores (StarCore) and dedicated hardware accelerators (such as MAPLE for LTE turbo/viterbi decoding) on a single chip. The QorIQ family sits within NXP's broader communications processor portfolio, which itself belongs to the wider class of embedded microprocessors and SoCs used in networking infrastructure. This category hierarchy matters because small-cell base stations increasingly demand deterministic DSP throughput alongside flexible L2/L3 packet processing, which single-core architectures cannot deliver efficiently. Key features of the BSC9131NSN1KHKB include: dual heterogeneous compute cores running at up to 1 GHz each, integrated MAPLE-B2F LTE baseband accelerator for PHY offload, DDR3 memory controller with ECC support, integrated flash controller (IFC) for NAND/NOR boot, and a wide range of high-speed serial interfaces (SerDes, PCIe, SGMII) for backhaul and radio connectivity. The device is rated for 0 C to 105 C ambient operation and is offered in the 520-FCBGA package suitable for industrial-grade base-station boards. The architecture pairs a 32-bit PowerPC e500 core (running control-plane protocols and Linux) with a 32-bit StarCore SC3850 VLIW DSP (running PHY DSP code), connected via a shared system bus. The MAPLE-B2F accelerator handles forward error correction, freeing DSP cycles for channel estimation, FFT, and modulation/demodulation. This partitioning reduces total power consumption versus discrete CPU+DSP+FPGA designs and simplifies board layout by eliminating inter-chip high-speed links. Typical applications include small-cell LTE/eNodeB base stations, enterprise VoIP media gateways, smart-grid control and monitoring equipment, military/defense tactical radio platforms, and industrial machine-to-machine gateways. The combination of deterministic DSP, control CPU, and on-chip LTE accelerator makes the BSC9131 family particularly suitable for compact, low-power small-cell designs where board area and BOM cost are at a premium. When designing with this device, engineers should pay attention to power-rail sequencing (the SoC requires multiple voltage domains with strict ramp order), DDR3 PCB layout (length-matched, impedance-controlled traces with proper decoupling), and thermal management at the 520-FCBGA top-side cooling solution. Note that this part is documented by NXP as End of Life, so long-lifecycle designs should evaluate remaining inventory and second-source options carefully. This page synthesizes distributor pricing, lifecycle status, and design considerations not found in any single manufacturer document, providing engineers and procurement teams with a consolidated reference for evaluating the BSC9131NSN1KHKB against modern alternatives.

RFQ Contact
BSC9131NSN1KHKB557 - 800MHz 32-bit QorIQ Processor | NXP
BSC9131NSN1KHKB557

BSC9131NSN1KHKB557 - 800MHz 32-bit QorIQ Processor | NXP

NXP Semiconductors BSC9131NSN1KHKB557 is a 32-bit, single-core embedded microprocessor operating at 800 MHz in a 520-FCBGA (21 x 21 mm) package. It belongs to the QorIQ Qonverge BSC9131 processor family, which combines Power e500 and StarCore SC3850 core technologies with MAPLE-B2F specialist DSP acceleration processing. The device targets small-cell base stations, enterprise VoIP, smart-grid control, military and defense systems, and industrial embedded equipment. An embedded microprocessor is a semiconductor within the broader processor and microcontroller hierarchy. Unlike a general-purpose desktop processor, this device is designed for a fixed embedded system with defined networking, control, signal-processing, and real-time workloads. The BSC9131NSN1KHKB557 combines a high-performance processor core with dedicated DSP acceleration in one highly integrated package, reducing the need for separate accelerator devices in suitable designs. The supplied product information identifies one 32-bit processing core and an operating frequency of 800 MHz. Its architecture combines the Power e500 processing technology with the StarCore SC3850 technology and MAPLE-B2F specialist DSP acceleration. This combination is intended to address communications and signal-processing workloads requiring more computation than a basic control microcontroller while retaining the integration advantages of a dedicated embedded processor. The 520-FCBGA package measures 21 x 21 mm and provides a large, fine-pitch interconnect for the highly integrated device. Because the exact ball map, power rails, and exposed thermal features are not included in the supplied source data, PCB implementation must follow the complete NXP package documentation rather than infer connections from the package name. Ball assignment, power sequencing, decoupling, clocking, and memory-interface layout are essential engineering details for any BSC9131 design. Typical uses include small-cell base-station processing, enterprise VoIP platforms, smart-grid controllers, military and defense electronics, and industrial communication equipment. In each case, the device is most appropriate when its integrated Power e500, StarCore SC3850, and MAPLE-B2F resources can replace separate processing and DSP components. System partitioning should account for the 800 MHz single-core configuration, memory requirements, thermal design, and software ecosystem. This page combines the verified NXP family description with distributor identification, package information, practical design guidance, and same-family drop-in alternatives. It also identifies which electrical, thermal, pinout, lifecycle, and commercial details still require confirmation from the full NXP technical documentation or an authorized distributor quotation.

RFQ Contact
BSC9131NSN7KHKB - 800MHz e500 SoC | NXP Semiconductors
BSC9131NSN7KHKB

BSC9131NSN7KHKB - 800MHz e500 SoC | NXP Semiconductors

The NXP Semiconductors BSC9131NSN7KHKB is a highly integrated QorIQ Qonverge network processor based on one 32-bit PowerPC e500 core operating at 800 MHz, packaged in a 520-FCBGA (21 x 21 mm). It also incorporates a StarCore SC3850 DSP at 1 GHz and a MAPLE-B2F specialist DSP accelerator, providing heterogeneous processing for demanding communications workloads. A QorIQ Qonverge SoC is a system-on-chip that integrates one or more processor cores, specialized accelerators, memory interfaces, and communications peripherals into a single package. In the broader semiconductor hierarchy, this device is a microprocessor and application-specific processor within the embedded computing and network-processing market. Its combination of general-purpose control, DSP, and hardware acceleration targets small-cell base stations, enterprise VoIP, smart-grid control, industrial equipment, and military or defense systems. The supplied product data identifies a single 32-bit e500 core, 800 MHz operation, a 1 GHz StarCore DSP, MAPLE-B2F acceleration, IFC, DDR3 support, and an operating temperature range of 0 to 105 C. These features allow software to partition networking, signal-processing, and control workloads across specialized engines instead of relying on a single general-purpose core. The FCBGA package supports dense integration but requires careful PCB layout, thermal management, and high-speed memory routing. The NXP product page identifies BSC9131NSN7KHKB as end of life, so new production availability is not expected. Procurement should therefore focus on factory-new inventory, traceability, and lifecycle risk rather than assuming a roadmap-backed supply. Its processor architecture and thermal characteristics must also be assessed against the original system requirements, especially DDR3 memory behavior, accelerator utilization, operating temperature, and long-term software maintenance. This processor is most appropriate when an existing Qonverge design already depends on the BSC9131's e500, StarCore, MAPLE-B2F, IFC, and DDR3 integration. New designs should evaluate whether an active processor family provides lower lifecycle risk and better long-term software support. For a direct physical substitution, the replacement must match the 520-FCBGA package, ball map, power architecture, memory interface, clocking, and software initialization sequence. The most important design check is the complete power and signal-integrity plan. Validate high-current core and I/O supplies with the manufacturer's recommended regulators and decoupling, route DDR3 as a length-matched topology, and control simultaneous switching across the complex SoC. Maintain the processor below its specified junction limits and use the manufacturer hardware-design guidance for thermal vias and exposed-package connections. This page combines verified manufacturer and distributor facts with lifecycle warnings, application guidance, procurement considerations, and the practical distinction between a true drop-in replacement and a merely functional alternative. It is intended to support engineering review and sourcing decisions without implying new-production availability for this end-of-life processor.

RFQ Contact
BSC9131NXE1KHKB - 800MHz 32-Bit Processor | NXP
BSC9131NXE1KHKB

BSC9131NXE1KHKB - 800MHz 32-Bit Processor | NXP

The NXP Semiconductors BSC9131NXE1KHKB is an 800 MHz, 32-bit RISC microprocessor combining a Power Architecture e500 processor, StarCore SC3850 DSP, and MAPLE-B2F baseband acceleration in a 520-ball FCBGA package. According to the retrieved distributor data, the device is supplied in a tray, uses a 45 nm process, and targets small-cell base stations, enterprise VoIP, smart-grid control, military, defense, and industrial systems. A system-on-chip is an integrated semiconductor that combines a general-purpose processor, specialized digital signal processing, memory interfaces, security functions, and accelerator hardware. In the product hierarchy, this device belongs to the microprocessor and embedded processor market, rather than the discrete logic or analog IC categories. Its heterogeneous architecture allows control software and signal-processing workloads to share one package while retaining dedicated hardware for demanding communications tasks. The verified listing identifies one 32-bit e500 core operating at 800 MHz and an SC3850 signal processor. Other listings describe the BSC9131 family with 1 GHz e500 and StarCore processing, but those family-level frequencies are not substituted here for the exact target MPN. The part also includes MAPLE-B2F specialist DSP acceleration, DDR3 and DDR3L memory controllers, security processing, and no graphics acceleration according to the supplied datasheet-derived record. The exact target is identified as an industrial-temperature-grade component in a 520-terminal square FCBGA package. Package-ball layout and signal integrity are especially important because the device contains a high-performance processor subsystem, external-memory interfaces, and communications accelerators. Thermal design must account for the processing load and the package's thermal path, while firmware and board-support-package support must match the exact ordering code. Typical uses include LTE small-cell base stations, enterprise voice-over-IP equipment, smart-grid controllers, military and defense systems, and industrial embedded platforms. The integrated processor, DSP, and accelerator arrangement is valuable where control traffic, packet processing, and physical-layer signal processing must coexist in a compact system. Before committing a design, verify the exact 520-ball pinout, power rails, clock requirements, memory topology, boot configuration, and software support in the manufacturer documentation. Because the exact MPN is marked End of Life on NXP's product page, production planning should include lifecycle-risk review rather than treating remaining inventory as a permanent supply commitment. This page consolidates the exact MPN specifications, lifecycle information, observed distributor pricing, source links, and engineering constraints supplied for BSC9131NXE1KHKB. It also distinguishes exact-part data from broader BSC9131 family descriptions, avoiding unsupported substitution of related frequencies, package variants, or functions.

RFQ Contact
BSC9131NXN1KHKB - 800MHz e500 Processor SoC | NXP | 520-FCBGA
BSC9131NXN1KHKB

BSC9131NXN1KHKB - 800MHz e500 Processor SoC | NXP | 520-FCBGA

NXP BSC9131NXN1KHKB is a QorIQ Qonverge communications processor integrating a 32-bit PowerPC e500 core, StarCore DSP acceleration, MAPLE-B2F specialist DSP processing, and DDR3 memory support in a 520-pin FCBGA package. The DigiKey listing identifies the processor as a single-core, 32-bit device operating at 800MHz, while other indexed descriptions associate the BSC9131 family with 1GHz-class e500 and StarCore processing. Its integrated architecture targets small-cell base stations, enterprise VoIP equipment, smart-grid control, industrial systems, and military or defense platforms. A communications processor is a specialized system-on-chip that combines a general-purpose CPU, digital signal processing resources, memory interfaces, and communications-oriented peripherals. Within the product hierarchy, the BSC9131 belongs to the QorIQ Qonverge family of embedded processors, extending beyond a generic microcontroller into the processor category with deterministic networking, DSP acceleration, and external memory support. This combination allows one package to handle protocol processing, control-plane work, and specialized signal-processing tasks while reducing board-level component count. The principal feature set evidenced by the verified listings includes a PowerPC e500 processor core, StarCore DSP technology, MAPLE-B2F specialist DSP acceleration, DDR3 support, and an IFC communications interface. The available source descriptions also indicate a broad operating-temperature option of -40C to 105C for the device family. These capabilities suit designs that need substantially more computation than an ordinary MCU while retaining an integrated communications-processor architecture rather than using a discrete CPU and accelerator combination. The BSC9131's heterogeneous processing arrangement is central to its value. The e500 core is suited to control functions and network-facing software, while StarCore and MAPLE-B2F resources handle DSP-intensive workloads. In small-cell equipment, this division can reduce external processing hardware and simplify the bill of materials. In enterprise VoIP and industrial control systems, it can combine packet handling, real-time signal transformation, and supervisory control within a single processor platform. Typical uses include small-cell base-station controllers, enterprise VoIP media or control nodes, smart-grid monitoring equipment, industrial communication gateways, and rugged defense or defense-adjacent electronics. The 21 mm by 21 mm 520-FCBGA package provides a dense integration option, but it also requires a demanding multilayer PCB with controlled escape routing, power delivery, and thermal design. The package is supplied in a tray according to the indexed part information. A key engineering consideration is BGA assembly and thermal management. The package has 520 fine-pitch balls and cannot be assembled with conventional through-hole methods; a controlled-reflow profile, adequate pad design, and buried or via-connected power planes are generally necessary. Designers should also validate the exact power rails, I/O standards, clocking, memory topology, and peripheral availability against the official BSC9131 documentation before schematic or layout release. This page consolidates verified NXP and distributor information, lifecycle status, application guidance, and engineering caveats. It also distinguishes device-family claims from exact SKU-specific values, avoiding unsupported assumptions about features that are not stated in the supplied records. NXP identifies the exact part as end of life, so procurement should focus on remaining authorized inventory and a controlled redesign or migration plan rather than new long-term design commitments.

RFQ Contact