Products (20,000+)

MC68030FE25C - 25MHz 32-Bit MPU w/ MMU, 132-CQFP | NXP
MC68030FE25C

MC68030FE25C - 25MHz 32-Bit MPU w/ MMU, 132-CQFP | NXP

The NXP MC68030FE25C is a second-generation 32-bit enhanced microprocessor from the M68000 family, operating at 25 MHz with on-chip memory management and integrated caches. The device is housed in a 132-pin ceramic quad flat pack (132-CQFP, 24x24 mm) and is offered in a commercial temperature grade. It implements the M680x0 instruction set with extensions for virtual memory and tightly-coupled instruction/data caches, retaining binary compatibility with the MC68020 while adding burst-mode memory support. Background: A microprocessor (MPU) is the central processing unit of a computer system, integrating the ALU, register file, instruction decoder and memory interface onto a single die. Within the broader semiconductor taxonomy, an MPU sits under CPU -> processor -> logic IC -> integrated circuit. The M680x0 family is a classic CISC (Complex Instruction Set Computer) lineage originally developed by Motorola and now stewarded by NXP/Freescale; the 68030 specifically is the second-generation member that introduced an integrated MMU and unified instruction/data caches. Key features include a 32-bit internal data path and 32-bit external data bus, an integrated paged MMU supporting demand-paged virtual memory, separate 256-byte instruction and data caches that can be configured as unified, a burst-fill memory controller for DRAM page-mode accesses, and a co-processor interface for the MC68881/MC68882 floating-point units. The 25 MHz clock yields approximately 7 MIPS of sustained throughput. Architecturally, the 68030 is microcoded with a four-stage instruction pipeline and dual independent cache controllers. The MMU uses 4-byte descriptors with transparent translation, configurable for 4 KB or 8 KB page sizes, and the burst mode reduces external memory cycles for sequential fetches, effectively increasing the apparent bus bandwidth. The 132-CQFP ceramic package is rated for military/aerospace thermal grades (-55C to +125C) and is the canonical ceramic pin-out used by 68030-based VMEbus and embedded systems. Typical applications include legacy VMEbus single-board computers, military and aerospace command-and-control systems, industrial process controllers requiring deterministic MMU behavior, telecommunications switching equipment, and long-lifecycle embedded platforms where software compatibility with the 68000 instruction set is mandatory. The ceramic package also makes the part a candidate for high-reliability and radiation-tolerant designs. When designing with the 68030, ensure the system clock driver meets the 25 MHz duty-cycle tolerance and that the burst-mode timing is observed for DRAM-based subsystems. The MMU must be configured or disabled at reset; failure to set the initial translation tables can cause bus errors on first access. This page synthesizes distributor pricing, parametric cross-references and practical design notes for the MC68030FE25C that are not aggregated on the manufacturer datasheet itself, so engineers can evaluate drop-in replacements and long-term availability in a single view.

RFQ Contact
MC68040RC33V - 33MHz 32-bit M68040 MPU, 182-PGA | Motorola
MC68040RC33V

MC68040RC33V - 33MHz 32-bit M68040 MPU, 182-PGA | Motorola

The Motorola MC68040RC33V is a third-generation 68000-family 32-bit microprocessor running at 33 MHz, housed in a 182-pin ceramic PGA (47.24 x 47.24 mm) package and built on a 0.5 µm CMOS process. It is one of the highest-performance M680x0 CPUs ever produced, integrating an integer pipeline, an on-chip floating-point unit (FPU), dual 4 KB instruction and data caches, and a memory management unit (MMU) supporting virtual memory. A microprocessor (MPU) is the central processing unit of a computer system: a single-chip integrated circuit that fetches, decodes, and executes instructions. In the system hierarchy, the MPU sits at the top of the compute chain (MPU -> CPU -> processor -> logic IC -> semiconductor) and is supported by memory ICs, bus interface ICs, and peripheral controllers. The M68040 family belongs to the broader category of CISC (Complex Instruction Set Computer) microprocessors, distinct from RISC architectures such as ARM or MIPS. Key features of the MC68040RC33V include 33 MHz core clock, on-chip 4 KB + 4 KB Harvard-style caches, hardware MMU with table-walk translation, integrated FPU, and a 32-bit external data bus. The 'V' suffix indicates the 3.3 V-compatible revision (sometimes marketed as MC68040V), although the original datasheet lists a 5 V supply. The 'RC' suffix indicates a ceramic PGA package. Architecturally, the MC68040RC33V uses a 6-stage integer pipeline with dual issue of integer and floating-point operations, providing roughly 2x the performance of the MC68030 at the same clock. The integrated MMU eliminates the need for an external 68851, simplifying board design for UNIX workstations and embedded systems. Typical applications include legacy VMEbus single-board computers, industrial process-control PLCs, aerospace flight-control retrofits, telecom switching equipment, and obsolete UNIX workstation mainboards (Sun-3/NeXTStation-era designs). The wide third-party tool ecosystem (gcc -m68040, binutils m68k) keeps the part relevant in long-lifecycle industrial and defense programs. When designing with the MC68040RC33V, use a 33 MHz fundamental-mode oscillator and observe the bus arbitration timing in the MC68040 User's Manual. The 182-PGA footprint is large and requires a socket or careful PCB layout; designers often use a through-hole PGA socket to allow field replacement. This page synthesizes distributor pricing (DigiKey, Mouser, Octopart), pin-compatible same-family alternatives (MC68040RC25A, MC68LC040RC33A), and practical design notes not found in the bare Motorola datasheet PDF.

RFQ Contact
MC68302AG16C - 16MHz M68000 Integrated Comm Processor | NXP
MC68302AG16C

MC68302AG16C - 16MHz M68000 Integrated Comm Processor | NXP

The NXP MC68302AG16C is a 16 MHz integrated multi-channel communications processor that combines an M68000 microprocessor core (cold-fire class) with on-chip peripherals optimized for networking and telecom systems, housed in a 144-pin LQFP (20x20 mm) tray package. As a member of the original MC68302 family launched in the early 1990s, the part integrates a 32-bit programming-model M68000 core, a DMA controller, three serial communications controllers (SCCs), two serial management controllers (SMCs), a parallel interface, and a timer module on a single die. An integrated communications processor (ICP / multi-channel comm controller) is a system-on-chip variant of a microprocessor that adds dedicated serial-channel hardware, DMA, and timers alongside the CPU. It sits in the taxonomy as MPU -> communications processor -> networking SoC -> embedded processor, allowing designers to replace separate UART, DMA, and CPU chips with one device. The MC68302 was the first NXP (then Motorola) device to closely couple an industry-standard MC68000/MC68008 core with a flexible communications architecture, becoming a foundational part for ISDN, modem, router, and X.25 designs. Key features include operation at 16 MHz (the AG16C suffix indicates 16 MHz grade), an 8/16-bit external data bus with a 32-bit internal programming model, three independent SCCs supporting HDLC/SDLC, UART, transparent modes, and bisync protocols, plus 2 Kbytes of internal dual-port RAM for descriptor and buffer storage. The device supports 24-bit address space, hardware multiply/divide, seven levels of interrupt, and a low-power stop mode that freezes the core while preserving register state. Typical applications include ISDN terminal adapters, branch-office routers, frame relay access devices, X.25 packet switches, industrial serial concentrators, and legacy telecommunication backplanes. The wide protocol coverage allows a single part to handle multiple WAN interfaces, reducing BOM count and PCB area compared to discrete CPU-plus-UART solutions. When designing with this part, allocate external memory-mapped peripherals in the 16-Mbyte address space and follow Motorola bus arbitration rules for multi-master systems. The 144-pin LQFP package has a relatively large footprint for modern designs (20x20 mm), so socketed adapter boards are common when integrating into newer systems.

RFQ Contact
MC68302AG16VC - 16MHz M68302 MPU + Comm Processor | NXP
MC68302AG16VC

MC68302AG16VC - 16MHz M68302 MPU + Comm Processor | NXP

The NXP MC68302AG16VC is a 16 MHz integrated multi-channel communications microprocessor combining an M68000 processing core with on-chip RISC communications processor and peripheral integration, housed in a 144-pin LQFP (20x20 mm) package. The device supplies 1 core operating at 8/16-bit internal data path with on-chip DRAM controller, serial channels, and timers, designed as a one-chip networking processor. What is an integrated communications processor? It is a class of system-on-chip combining a general-purpose CPU with a dedicated RISC engine optimized for HDLC/SDLC framing, DMA, and serial channel management. The MC68302 family pioneered this architecture by tightly coupling an industry-standard MC68000/MC68008 microprocessor core with a flexible communications processor module (CPM), eliminating the need for an external protocol controller in router, bridge, and ISDN terminal adapter designs. It belongs to the M68000 microprocessor family (MPU > integrated communications controller > SoC > semiconductor). Key features include a 16.67 MHz maximum operating frequency (commonly marketed as 16 MHz), 1 core with 8/16-bit bus width, integrated RISC communications co-processor for multi-channel protocols, on-chip DRAM controller, dual UART ports, and a single serial communications controller. The 144-LQFP package provides a thermal-friendly body and supports conventional surface-mount PCB assembly on industrial and telecom infrastructure boards. Architecturally, the MC68302AG16VC uses the classic M68000 instruction set with a 32-bit internal architecture and 16-bit external data bus (the "AG16V" suffix denotes LQFP package, 16 MHz, and commercial operating grade). The integrated CPM offloads bit-level protocol handling from the CPU, enabling simultaneous operation across multiple serial channels. This integration enables deterministic protocol handling without host CPU saturation - a distinct advantage over discrete MPU + protocol-ASIC solutions. Typical applications include ISDN terminal adapters, branch-office routers, X.25 / frame relay packet assemblers, MODEM banks, and industrial serial-bridge gateways. The integrated CPM makes it particularly attractive for legacy systems that require simultaneous management of multiple HDLC/PPP links without external logic. When designing with this device, allocate generous PCB area for the 144-pin LQFP footprint (20x20 mm body) and ensure the decoupling network uses one 100 nF cap per power pin pair. Legacy support libraries and the mature Green Hills or Diab compiler toolchain are recommended for new firmware migration projects. This page synthesizes distributor pricing, drop-in alternatives, lifecycle context, and practical design notes not found in any single manufacturer document.

RFQ Contact
MC68302AG20C - 20MHz M68300 Integrated Comm Processor | NXP
MC68302AG20C

MC68302AG20C - 20MHz M68300 Integrated Comm Processor | NXP

The NXP MC68302AG20C is a 20 MHz M68000-family integrated multi-channel communications processor with a 68000 core, DMA controller, serial communication controllers (SCCs), and a 144-pin LQFP (20x20 mm) package. It targets embedded networking and telecom designs where deterministic serial I/O is required alongside a familiar 68000 instruction set, and is offered in the 144-LQFP plastic package. The 'G20' suffix denotes the 20 MHz maximum CPU clock and the 'A' package designator is the LQFP-144 plastic package. What is an integrated communications processor? An integrated communications processor (ICP) combines a general-purpose CPU core with on-chip peripherals such as DMA engines, serial channel controllers, timers, and parallel ports that are tuned for protocol handling. The M68302 was the first device to offer a closely-coupled, industry-standard MC68000/MC68008 microprocessor core combined with a flexible communications architecture, placing it inside the broader taxonomy: microcontroller -> microprocessor -> integrated communications processor -> embedded networking SoC -> semiconductor. Key features include up to three independent serial communications controllers (SCCs) supporting HDLC/SDLC, UART, and BISYNC protocols, a 2-channel DMA engine, 1152 bytes of on-chip dual-port RAM, a 24-bit address bus providing 16 MB of linear addressing, and an interrupt controller with up to seven external interrupt sources. The device operates from a single 5 V supply and supports a maximum CPU clock of 20 MHz. The MC68302 architecture is built around a true 32-bit internal 68000 core running with a 16-bit external data bus, allowing engineers to reuse legacy 68000 firmware while gaining dedicated serial DMA offload. The on-chip RISC communications processor (CP) handles bit-level protocol work, freeing the core for higher-layer tasks. This dual-engine design was pioneering for early 1990s networking ASICs. Typical applications include ISDN terminal adapters, ISDN modem modules, X.25 packet switches, industrial routers, factory-floor communication controllers, and legacy telecom backplane designs. The part also appears in industrial serial-bridge gateways and protocol-conversion adapters where deterministic SCC behaviour is required. When designing with the MC68302AG20C, ensure proper bus arbitration and timing closure for the 20 MHz external clock. The SCC pins require external transceivers for RS-232/RS-485 connectivity. According to the NXP datasheet, decoupling must be placed close to the multiple VCC/GND pairs of the LQFP-144. This page synthesizes distributor stock signals, EOL status, drop-in 68000-family alternatives, and design notes beyond what the manufacturer datasheet alone offers.

RFQ Contact
MC68302AG25C - 25MHz M683xx Integrated Comm Processor | NXP
MC68302AG25C

MC68302AG25C - 25MHz M683xx Integrated Comm Processor | NXP

The NXP MC68302AG25C is a 25 MHz integrated multi-channel communications processor built on the M68000 core architecture, packaged in a 144-pin LQFP (20x20 mm). It combines a 32-bit M68000 microprocessor core with on-chip peripherals including a flexible communications architecture (RISC-based CPM), three serial communication controllers (SCCs), two serial management controllers (SMCs), a DMA controller, and a 2-channel 16-bit timer. An integrated communications processor (ICP) is a category of embedded microprocessor that tightly couples a CPU core with dedicated serial-channel and DMA hardware on the same silicon die. In the system hierarchy, the MC68302 sits above generic microcontrollers (which typically lack multi-protocol serial engines) and below full network processors (NPUs) that integrate dedicated MAC-layer offload. This integration reduces external component count in embedded networking designs by replacing discrete UART, DMA, and interrupt controller chips with on-die logic. Key features of the MC68302AG25C include a 25 MHz maximum internal clock, 8/16-bit external data bus width, separate 32-bit M68000 internal architecture, programmable chip-select outputs, dual-port RAM for descriptor management, and a watchdog timer. The device operates from a single 5 V supply and is rated for the commercial temperature range of 0C to 70C. Architecturally, the MC68302 separates control-plane and data-plane tasks by offloading DMA and serial-protocol handling to the CPM block. Each SCC supports protocols such as HDLC, UART, BISYNC, and transparent mode, while the IDMA controller supports linked-list descriptor operation. This dual-engine partitioning enables sustained serial throughput even when the CPU is servicing application-layer logic. Typical applications include ISDN terminal adapters, low-end routers and bridges, industrial serial concentrators, factory automation gateways, and legacy telecom line cards. Its wide protocol support makes it especially suited to multi-protocol serial multiplexing in industrial and telecom systems. When designing with the MC68302AG25C, ensure that the host PCB provides a 25 MHz oscillator with adequate stability, and that the system memory map is configured via the base address registers before any peripheral initialization. Improper bus-cycle termination can cause intermittent DMA underruns under heavy SCC load. This page synthesizes distributor availability, drop-in alternatives within the M68302 family, and practical design considerations not consolidated in the original Motorola/Freescale datasheet.

RFQ Contact
MC68302AG33C - 33MHz M68302 Integrated Comm Processor | NXP
MC68302AG33C

MC68302AG33C - 33MHz M68302 Integrated Comm Processor | NXP

The NXP MC68302AG33C is a 33MHz M68302 integrated multiprocessor that combines the M68000 microprocessor core with a flexible multi-channel communications architecture and DMA controller in a single 144-pin LQFP package. It is one of the first devices to tightly couple an industry-standard MC68000/MC68008 CPU core with on-chip serial and parallel communications peripherals, targeting networked embedded applications. Operating from a 5V supply, the part integrates a 32-bit M68000 core operating at 33 MHz, an SCC (Serial Communications Controller) block, an SCP (Serial Communications Port), a parallel I/O port, and a three-channel DMA engine. An integrated communications processor (or communications controller) is a category of embedded microprocessor that pairs a general-purpose CPU core with hardware peripherals dedicated to moving serial and parallel data, offloading low-level protocol work from the CPU. The MC68302 family is the Freescale/NXP ancestor of the later PowerQUICC and QorIQ communications processors, and belongs to the broader taxonomy: communications controller -> embedded microprocessor -> MPU (microprocessor unit) -> integrated circuit. Devices in this category are typically deployed where deterministic serial throughput, DMA, and CPU processing must coexist on a single die. Key features include: up to 33 MHz CPU clock from a 5 V supply, three independent full-duplex serial channels supporting HDLC/SDLC, UART, and BISYNC protocols, an integrated three-channel DMA controller that supports memory-to-memory, peripheral-to-memory, and memory-to-peripheral transfers, a parallel I/O port with programmable direction, and an interrupt controller with vectored interrupts. The 144-pin LQFP (20x20 mm) package supports surface-mount assembly and provides 144 signals to access the full address/data bus, DMA, and peripheral pins. Architecturally, the part is built on HCMOS technology and uses a von Neumann-style unified bus that is shared between the M68000 core and the on-chip DMA engine. The shared bus simplifies hardware but means that burst DMA traffic can stall the CPU; system designers must budget DMA bandwidth against CPU instruction throughput. The part ships as a tray-packaged extended-temperature plastic LQFP suitable for industrial embedded designs. Typical applications include: ISDN terminal adapters, frame-relay and X.25 router line cards, industrial serial concentrators, telecom control boards, and legacy protocol bridges that need deterministic multi-channel serial I/O. Designers also use the MC68302 family for SCADA/Modbus controllers, point-of-sale terminals, and legacy industrial fieldbus gateways where the M68000 toolchain and proven silicon are still preferred. When designing with this device, ensure that your reset, clock, and bus arbitration circuits match the M68302 reference design because the on-chip DMA and the CPU share the external bus and will contend if misconfigured. The 144-LQFP package requires a moderate PCB thermal copper pour; at full load the device dissipates roughly 1 W, well within the 1.5 W rating of the plastic LQFP. The part is now end-of-life at NXP, so designers of new products should evaluate the M68360 or ColdFire MCF523x family as migration paths while still maintaining the M68000 instruction set where possible. This page synthesizes distributor pricing, drop-in and same-family alternatives, and practical design notes that go beyond the manufacturer datasheet so engineers can quickly evaluate the MC68302AG33C for new designs or as a long-lifecycle drop-in.

RFQ Contact
MC68302CAG16VC - 16MHz M683xx MPU, 144-LQFP | NXP Semiconductors
MC68302CAG16VC

MC68302CAG16VC - 16MHz M683xx MPU, 144-LQFP | NXP Semiconductors

The NXP MC68302CAG16VC is a 16 MHz integrated multiprotocol microprocessor from the M683xx family that combines an M68000 CPU core with on-chip communications peripherals. The device packages an 8/16-bit external data bus MPU core, DMA controller, serial communications channels, and parallel I/O into a single 144-pin LQFP (20x20 mm) surface-mount package. It is qualified as a multi-channel communications processor aimed at networking, telecom, and embedded control applications. An integrated multiprotocol processor (IMP) is a system-on-chip that merges a general-purpose microprocessor core with dedicated communication controllers such as HDLC, UART, and timers. In the broader IC taxonomy, the MC68302 belongs to the MPU -> embedded processor -> microcontroller family of semiconductor devices. Its tightly coupled architecture reduces external glue logic and is typically used in designs that need multiple serial channels orchestrated by a 68000-class CPU without paying for a full ASIC. Key features include a 16 MHz clock rate, on-chip DMA, three independent serial communications controllers (SCCs) supporting HDLC/SDLC/UART protocols, two serial management controllers (SMCs), a 4-channel general-purpose timer, and a system integration module (SIM60). The 144-LQFP package provides ample I/O for parallel ports, chip selects, and the external address/data bus. The part operates from a 5V supply per legacy M68000-system convention, and is specified over the industrial temperature range. The MC68302 is fabricated on a mature CMOS process and supports an 8- or 16-bit external data bus with a 32-bit internal architecture. This 8/16-bit external bus allows designers to use lower-cost memory and peripherals while still benefiting from 32-bit internal register and ALU operations. The chip integrates dedicated RISC-like DMA engines, freeing the CPU from low-level data movement across serial channels. Typical applications include ISDN terminal adapters, industrial routers, protocol bridges, factory automation controllers, and legacy telecom equipment that requires HDLC framing. Designers often pair the MC68302 with external SRAM and EPROM plus a PHY/transceiver for serial line interfaces such as RS-232, RS-485, or V.35. When designing with this part, plan memory map and chip-select configuration early because the SIM60 module hard-wires boot and chip-select behavior at reset. The non-multiplexed external bus simplifies PCB layout but consumes more pins than an address/data-multiplexed alternative. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for legacy M68000-system engineers that are not consolidated in the manufacturer datasheet.

RFQ Contact
MC68302CEH16C - 16MHz M68300 Multiprotocol Comm Processor | NXP
MC68302CEH16C

MC68302CEH16C - 16MHz M68300 Multiprotocol Comm Processor | NXP

The NXP MC68302CEH16C is a 16MHz, 8/16-Bit M68000-family integrated multiprotocol communications processor in a 132-pin PQFP (46x46 mm) package, optimized for embedded networking and telecommunications designs. It combines an MC68000/MC68008 microprocessor core with on-chip peripherals including DMA, serial communication controllers (SCC), and a multi-channel communications architecture, all in a single 4.5V-to-5.5V device. An M68300 (formerly 683xx) multiprotocol communications processor is a highly integrated System-on-Chip that merges the M68k CPU core with serial channel hardware, timers, and DMA to offload protocol handling from external logic. The MC68302 family sits in the M68000 product hierarchy between simpler 68k microcontrollers (MC68332) and higher-performance 68k networking parts (MC68360), making it a sweet spot for cost-sensitive voice/data routing and terminal equipment. This background explains the part's continued presence in legacy telecommunication, ISDN, and industrial control designs even decades after introduction. The MC68302CEH16C runs at 16MHz with a 16-bit data bus, integrates up to three independent serial communication controllers supporting HDLC, UART, BISYNC, and transparent modes, plus a 7-channel DMA controller, three parallel I/O ports, and two independent timers. The 132-pin PQFP-132 (46x46 mm) package is a plastic quad flat pack designed for surface-mount assembly on telecom backplanes and VME-based hardware. Operating voltage spans 4.5V to 5.5V and the device is rated for the industrial temperature range of 0C to +70C. This part was originally designed to reduce component count in routers, bridges, X.25 PADs, frame relay access devices, and ISDN terminal adapters by collapsing what was previously a CPU plus separate serial controller chip plus DMA chip into one silicon die. The architecture closely couples the 68000 core to the on-chip peripheral modules via dedicated interrupt and bus-arbiter logic so that protocol engines can move bytes with minimal CPU intervention. Because the Serial Communication Controllers (SCCs) handle framing in hardware, the core is free to execute higher-layer stacks. Typical applications include remote access concentrators, industrial serial gateways, X.25 packet assemblers/disassemblers, ISDN terminal adapters, and legacy telecom line cards. Engineers also deploy this part in long-life industrial control and metering platforms where it is favored for its deterministic behavior and extensive firmware ecosystem built over decades. When designing with the MC68302CEH16C, ensure a robust 5V rail (the device is intolerant of 3.3V supply) and provide bulk decoupling on each VDD/VSS pair. The 132-pin PQFP-132 footprint demands a 4-layer board with via-in-pad escape for clean signal integrity on the parallel port lines; allocate adequate cooling area since the 16MHz core dissipates measurable power under continuous bus activity. This page synthesizes cross-reference alternatives, distributor pricing, and form-fit-function design notes for engineers seeking to source or replace the MC68302CEH16C in legacy and long-lifecycle platforms.

RFQ Contact
MC68302CRC16C - 16MHz IMP M683xx MPU | NXP | Networking
MC68302CRC16C

MC68302CRC16C - 16MHz IMP M683xx MPU | NXP | Networking

The NXP (formerly Motorola/Freescale) MC68302CRC16C is a 16 MHz Integrated Multiprotocol Processor (IMP) from the M68000 family, integrating an MC68000-derived 8/16-bit core with on-chip multi-channel communication peripherals in a 132-pin ceramic/ceramic-equivalent PGA package measuring 34.5 x 34.5 mm. It combines an industry-standard M68000 core with serial communication channels, DMA, timers, and parallel I/O, targeting networking, telecom, and industrial controller designs. An Integrated Multiprotocol Processor (IMP) is a category of VLSI devices that merge a general-purpose microcontroller core with purpose-built communication peripherals, allowing a single chip to handle both host processing and protocol framing for serial protocols like HDLC, UART, and BISYNC. The MC68302 family occupies the niche between pure microcontrollers and dedicated protocol controllers, sitting inside the broader hierarchy: microcontroller -> communication controller -> integrated multiprotocol processor -> VLSI networking controller. Key features of the MC68302CRC16C variant include a maximum CPU clock of approximately 16.67 MHz (24 MHz input clock via the on-chip PLL), three serial communication controllers (SCCs) configurable for HDLC/SDLC, UART, BISYNC, and transparent modes, two serial management controllers (SMCs), seven DMA channels, three independent timers, a 24-bit address bus, and a 16-bit data bus. The integrated RISC communications processor offloads bit-level protocol work from the main CPU core. The architecture pairs the well-known M68000 instruction set with a tightly coupled RISC-style communications engine, allowing the main CPU to execute application code while the communications processor manages DMA-driven SCC frame reception/transmission without CPU intervention. This dual-engine topology lets the device sustain wire-speed HDLC on multiple channels while still running management software. Typical applications include wide-area network routers and bridges, X.25 packet assembler/disassembler (PAD) equipment, ISDN terminal adapters, frame relay access devices, industrial serial-backplane controllers, and legacy telecom control boards. The ceramic PGA package suits through-hole industrial and telecom backplanes where thermal headroom and socket-replaceability matter more than board real estate. When designing with this device, allocate careful attention to bus arbitration and memory timing, because the on-chip DMA engine can request the external bus at any time during active SCC reception. A wait-state calculator for the chosen SRAM/EPROM speed grade is recommended before finalizing PCB layout. The PGFA ceramic PGA package also requires a socket or plated-through-hole footprint, so PCB fabrication cost is higher than equivalent QFP MPU designs. This page synthesizes distributor pricing, drop-in variants within the MC68302 family, and practical engineering notes not found in the standalone manufacturer datasheet, giving procurement and design engineers a single-source reference for sourcing and second-sourcing decisions.

RFQ Contact
MC68302CRC20C - 20MHz M683xx Integrated Multiprotocol Processor | NXP
MC68302CRC20C

MC68302CRC20C - 20MHz M683xx Integrated Multiprotocol Processor | NXP

The NXP MC68302CRC20C is a 20 MHz M68000-family integrated multiprotocol processor (IMP) housed in a 132-pin ceramic PGA (BEPGA, 34.5 x 34.5 mm) package, integrating a 68000-derived CPU core with on-chip communication peripherals for embedded networking and control designs. An integrated multiprotocol processor is a VLSI device that combines a microprocessor core with serial communication controllers, DMA engines, timers, and parallel I/O into a single die. It belongs to the broader category of microprocessors / microcontrollers and sits within the M68000/ColdFire family tree, making it a member of the semiconductor integrated-circuit hierarchy. The IMP concept eliminates the need for external glue logic in telecom and industrial control designs. Key features of the MC68302CRC20C include a single 8/16-bit M68000 core running at 20 MHz, three independent serial communication controllers (SCCs) configurable for HDLC, UART, BISYNC, and transparent modes, a two-channel DMA controller, two timer channels, and a 7-source interrupt controller. The 'C' speed grade (20 MHz) and the ceramic PGA package with RoHS-compliant lead-free terminations target long-life industrial and telecom infrastructure. Technically, the device is implemented in a 5 V HCMOS process and uses a 32-bit internal architecture with a 16-bit external data bus, which is the source of its 8/16-bit classification on distributor pages. It bridges the gap between simple MCUs and full MPUs by offering tightly-coupled serial communication blocks, allowing designers to build routers, bridges, and ISDN terminal adapters with minimal external logic. Typical applications include WAN routers, ISDN terminal adapters, X.25 / HDLC frame relay equipment, industrial serial-control concentrators, and legacy telecom line cards. The combination of three SCCs and two DMA channels makes it suitable for multi-port serial aggregation in legacy designs. When designing with this part, treat the ceramic PGA as a through-hole, socketable package suitable for prototyping and harsh-environment assemblies; signal integrity on the 20 MHz bus must respect the 68000 family AC timing notes and the IMP reference manual. Pin-for-pin compatible variants in the family allow seamless migration between speed grades without board rework. This page synthesizes distributor availability, parametric-equivalent variants, and design notes drawn from the manufacturer datasheet and reference manuals - information not bundled in any single distributor listing.

RFQ Contact
MC68302CRC20C157 - 20MHz M68000 IMP, 132-PGA | NXP
MC68302CRC20C157

MC68302CRC20C157 - 20MHz M68000 IMP, 132-PGA | NXP

The NXP MC68302CRC20C157 is an Integrated Multiprotocol Processor (IMP) from the M68302 family that combines an M68000-derived 8/16-bit core operating at 20 MHz with on-chip peripherals including a serial communications controller, DMA controller, and parallel I/O. It is housed in a 132-pin ceramic/ceramic-equivalent PGA (Pin Grid Array) package on a 39.63 mm x 39.63 mm body, and is part of the long-running MC68302 communications-controller lineage originally introduced by Motorola and continued by Freescale and NXP. An Integrated Multiprotocol Processor (IMP) is a specialized embedded microprocessor class that fuses a general-purpose CPU core with serial-communication hardware blocks (SCC, SMC) so a single chip can terminate multiple telecom protocols. Within the broader semiconductor taxonomy, an IMP sits under microprocessor -> embedded processor -> communications controller -> system-on-chip precursor; this historical positioning explains why MC68302CRC20C157 variants were widely deployed in ISDN modems, routers, and industrial serial concentrators in the 1990s and remain in service today for legacy equipment and long-lifecycle designs. Key features include a single M68000 core running at 20 MHz with 32-bit internal architecture and 16-bit external data bus, on-chip RISC-style communications-engine supporting HDLC/SDLC, UART, BISYNC, transparent modes, and PCM highway for ISDN applications. The device integrates three independent SCC channels plus two SMC channels, dual full-duplex serial DMA, and a 2-channel general-purpose DMA controller. Memory interface supports DRAM, SRAM, and ROM/EPROM with programmable wait-state insertion. Architecturally the MC68302CRC20C157 uses a 32-bit internal M68000 core but presents an 8-bit/16-bit-selectable external data path, allowing cost-optimized memory subsystems. The 20 MHz bus provides 5 MIPS (Dhrystone-class) performance, sufficient for WAN protocol termination and supervisory control. Hardware virtualization of protocol state machines offloads the host CPU and remains a distinctive feature compared with bare microcontroller alternatives. Typical applications include ISDN terminal adapters, X.25 and frame-relay packet assembler/disassemblers, multi-port serial controllers for industrial routers, T1/E1 channel-bank control, and legacy telecom line cards. The dual 8/16-bit bus also made it attractive for cost-sensitive process-control PLCs with serial backbones. When designing with this part, pay attention to the PGA socket selection: the 132-PGA package requires through-hole or socketed mounting and is not reflow-solderable on standard SMT lines, so plan for a socket or press-fit assembly. Power sequencing of the 5 V core supply should follow the M68000 family requirements to avoid latch-up during power ramp. This page synthesizes authorized distributor stock (Rochester Electronics), drop-in same-package family members, and practical design notes that are not collated in any single manufacturer document.

RFQ Contact
MC68302EH16C - 16MHz M683xx Multi-Protocol Com Proc | NXP
MC68302EH16C

MC68302EH16C - 16MHz M683xx Multi-Protocol Com Proc | NXP

The NXP MC68302EH16C is a 16 MHz multi-protocol communications processor built around the M68000 core, integrating a 1-core 8/16-bit CPU with on-chip peripherals for serial communications in a 132-pin PQFP (46x46 mm) package. As a member of the M683xx MPU family, it delivers CPU throughput of 1.1 MIPS at 16 MHz while embedding channelized SCCs, SCCs, SMCs, a DMA controller, and a 1152-byte dual-ported RAM for tightly-coupled data movement. An MPU (Microprocessor Unit) is a CPU-centric chip without on-chip non-volatile program memory, historically used as the host processor in deeply embedded designs such as routers, ISDN terminals, and industrial controllers. Within the broader taxonomy, the MC68302 sits one level below a full system-on-chip: it is an MPU plus dedicated communications silicon, which predates the modern SoC era by combining peripheral integration with deterministic M68000 firmware execution. Headline specifications include a 16.67 MHz maximum bus/clock, 16-bit data bus with 8-bit dynamic bus sizing, a 32-bit instruction set with extensive addressing modes, and a 2.7 V to 5.5 V tolerant I/O interface. Internal peripherals include three serial communications controllers (SCCs) supporting HDLC/SDLC, UART, and BISYNC, two serial management controllers (SMCs) for lower-speed serial channels, a 2-channel DMA engine, and a 2K-byte system integration block for chip-select and bus arbitration. This part is fabricated on a mature CMOS process and integrates 1,152 bytes of dual-port RAM for buffer descriptors and stacks, eliminating external SRAM in many low-channel-count designs. A hardware interrupt controller with 7 priority levels supports nested interrupts. The 132-pin PQFP package provides mature surface-mount manufacturability, while the part is specified across the 0 to +70C commercial temperature range and is fully static for clock-throttling flexibility. Typical applications include multi-protocol serial routers, ISDN terminal adapters, X.25 / frame relay access multiplexers, low-end industrial protocol bridges, and legacy telecom control boards. Designers choose this part when they need the M68000 toolchain, deterministic interrupt response, and on-chip HDLC/UART channels. When designing with the MC68302EH16C, provision adequate decoupling on the 5 V and 3.3 V rails and route the parallel bus with controlled-impedance traces. Note the part's lifecycle: this is a discontinued/EOL product per the NXP product page, so second-source alternatives and stocking strategies should be validated before committing the design.

RFQ Contact
MC68302EH16CB1 - M68302 Integrated MPU, 16MHz, 132-PQFP | NXP
MC68302EH16CB1

MC68302EH16CB1 - M68302 Integrated MPU, 16MHz, 132-PQFP | NXP

The NXP MC68302EH16CB1 is an integrated multi-channel communications processor combining the M68000 microprocessor core with a flexible RISC communications processor (CPM) in a 132-pin PQFP (46x46 mm) package. It operates at 16 MHz and integrates peripherals including DRAM controller, serial communication channels, timers, and parallel I/O for embedded networking designs. An MPU (microprocessor unit) is the central processing element of an embedded system, executing instructions, managing memory, and orchestrating peripherals through integrated or external bus interfaces. The MC68302 belongs to the M683xx family of communications processors, occupying the niche between general-purpose MCUs and high-end application processors; it pairs a classic CISC core with a dedicated serial-communications engine, making it ideal for protocol bridging and telecom dataplane tasks. Key features of the MC68302EH16CB1 include a 16 MHz M68000 (MC68000 instruction set) CPU core running at 16.67 MHz internal, an integrated RISC Communications Processor Module for HDLC/SDLC/UART protocol handling, three serial communication controllers (SCCs), a serial peripheral interface (SPI), an SCP, two DMA channels, and support for DRAM up to 32 MB. The device operates from a single 5 V supply. According to NXP's product page, the MC68302 was the first processor to combine a closely coupled, industry-standard MC68000 core with a flexible CPM architecture, enabling tightly integrated protocol stack acceleration. Architecturally, the MC68302EH16CB1 uses the industry-standard M68000 32-bit programming model (16-bit external data bus for the EH16CB1 variant) augmented by an on-chip RISC engine that offloads communications bit-processing. This dual-engine approach delivers higher protocol throughput than a host CPU executing interrupt-driven serial code, while preserving a familiar development environment for 68K engineers. Typical applications include ISDN terminal adapters, X.25 and frame relay interfaces, industrial routers and gateways, T1/E1 CSU/DSU designs, and legacy industrial control networks. The integrated CPM reduces BOM cost and PCB complexity for low-density communications designs. When designing with this part, ensure 5 V power supply decoupling is placed near the PQFP power/ground pins and that signal integrity is preserved on the parallel external data bus. Designers should consult the MC68302 Integrated Multiprotocol Processor User's Manual for bus timing, DRAM refresh, and CPM configuration register maps. This page synthesizes current distributor inventory, lifecycle status, parametric drop-in alternatives, and practical design notes not found in a single manufacturer document.

RFQ Contact
MC68302EH20C - 20MHz M683xx 8/16-Bit MPU | NXP | 132-PQFP
MC68302EH20C

MC68302EH20C - 20MHz M683xx 8/16-Bit MPU | NXP | 132-PQFP

The NXP MC68302EH20C is a 20 MHz M68000-family microprocessor (MPU) from the M683xx integrated communications controller line, integrating a 68000-class CPU core with on-chip peripherals in a 132-pin PQFP package (24.13 x 24.13 mm). The EH20C speed grade operates from a 5 V supply with a 20.0 MHz system clock, and the design is built around an 8/16-bit external data interface with a 24-bit address bus. What is an M683xx microprocessor? The M683xx family is a series of 68000-derived microprocessors (MPUs) that integrate the CPU core with one or more on-chip peripheral modules such as DMA controllers, serial communication controllers, timers, and chip-select logic, so a single device can run embedded communications, networking, or industrial-control firmware without external glue logic. Within that taxonomy, the MC68302 specifically pairs the 68000 core with a multi-channel communications engine (SCC/RMC/IDMA), positioning it as an integrated multi-protocol communications controller rather than a general-purpose MCU. Key features of the MC68302EH20C include: 20 MHz maximum CPU clock, 132-pin PQFP surface-mount package, integrated DMA, three serial communications controllers, a system integration block with chip-select logic, parallel I/O, timers, and watchdog; 5 V single-rail operation with TTL-compatible I/O. The H (high-speed) suffix denotes the 20 MHz grade and C denotes the PQFP plastic package. Architecturally, the MC68302EH20C uses the M68000 instruction set with a 32-bit programming model and 16-bit external data path, supporting seven address modes and a basic 56-instruction set with extensions for multiply/divide and bit-field operations. The on-chip bus arbiter and dual-port RAM allow autonomous transfers between the SCCs and main memory, which offloads the CPU and is one reason the part has historically been favored in router and WAN-front-end designs. Typical applications include multi-protocol serial communications front-ends, ISDN terminal adapters, industrial routers, telecom line cards, legacy point-of-sale and factory-automation controllers, and embedded networking bridges. The integrated peripherals let a single MC68302EH20C replace what would otherwise be a CPU plus separate DUART, DMA, and glue-logic chips. When designing with the MC68302EH20C, route the system clock with controlled impedance, keep the reset and HALT circuits clean, and verify DRAM refresh timing against the chosen memory configuration. Because this part is now in NXP end-of-life status, plan for last-time-buy windows or use the cross-reference table on this page to evaluate alternate M68302 speed grades. This page synthesizes distributor stock status, drop-in same-family alternatives (MC68302EH16C, MC68302CEH16C) and competitor equivalents, plus practical design notes not assembled in the original datasheet.

RFQ Contact
MC68302EH25C - 25MHz 68K Integrated Comm Processor MPU | NXP
MC68302EH25C

MC68302EH25C - 25MHz 68K Integrated Comm Processor MPU | NXP

The NXP MC68302EH25C is a 25 MHz integrated multiprocessor from the MC68302 family that combines a M68000-compatible 32-bit CPU core with an on-chip RISC-based Communications Processor (CP), DMA controller, and a rich set of serial/parallel peripherals, housed in a 132-pin PQFP package measuring 46 x 46 mm. It targets networking, telecom, and embedded communications applications that benefit from hardware-assisted protocol handling alongside a general-purpose 32-bit instruction set. Background: A microprocessor (MPU) is the central processing unit of an embedded system, executing instruction code, managing memory, and arbitrating peripheral access. The MC68302EH25C belongs to the M68000 (68K) family of CISC processors, which historically dominated telecommunications and industrial control. The "EH" suffix designates the Enhanced Hardware variant, and "25C" denotes a 25 MHz clock with the ceramic-windowed / commercial (C) temperature designation. This part is a system-on-chip predecessor of the ColdFire family, integrating CPU + DMA + serial + timers into one die. Key features include a 32-bit M68000 instruction set architecture with 8/16-bit external data bus, a RISC Communications Processor for HDLC/SDLC/UART/Transparent bit-stream handling, three independent full-duplex serial communications controllers (SCC), two serial management controllers (SMC), a 2-channel DMA controller, three timers, 1152 bytes of dual-port RAM for CP/CPU messaging, and an interrupt controller supporting up to 7 external IRQ lines. The architecture uses a Harvard-style split between the 68000 core and the RISC CP, allowing the CP to handle real-time bit-stream processing autonomously while the 68000 core runs system software. The 8/16-bit dynamic bus interface supports DRAM refresh and glueless memory interfacing, reducing external logic in cost-sensitive designs. Typical applications include ISDN terminal adapters, X.25 / frame relay packet assemblers, industrial control networks, serial-port multiplexers, and proprietary field-bus bridges. The integrated CP offloads HDLC framing so the 68000 core can manage higher-layer protocols without real-time jitter. When designing with this device, allocate at least 4.5 us between DMA bursts to avoid starving the SCC FIFOs. Note that this part is NXP End-of-Life; long-term designs should consider the pin-compatible MC68302FC variant or migrate to ColdFire MCF523x. This page synthesizes distributor stock, NXP end-of-life notices, drop-in alternative guidance, and engineering design notes not found in the original manufacturer datasheet.

RFQ Contact
MC68302RC16C - 16MHz M68000 IMP | NXP Semiconductors
MC68302RC16C

MC68302RC16C - 16MHz M68000 IMP | NXP Semiconductors

The NXP Semiconductors MC68302RC16C is a 16 MHz Integrated Multiprotocol Processor (IMP) based on the M68000 family core with 1 core operating at 8/16-bit data width, housed in a 132-pin PGA (34.5 x 34.5 mm) package. It belongs to the M683xx microprocessor product family and operates from a 5 V supply, integrating a closely coupled industry-standard MC68000/MC68008 CPU core with a flexible communications architecture aimed at networking and communications controllers. What is an Integrated Multiprotocol Processor (IMP)? An IMP is a highly integrated single-chip solution that combines a general-purpose microprocessor with dedicated serial-communications peripherals (such as HDLC/SDLC controllers, UARTs, and timers) plus DMA channels, all on the same silicon die. Within the broader component taxonomy the MC68302 sits between a microcontroller (MCU) and an applications processor, with a product hierarchy of M68000 core -> microprocessor (MPU) -> standard microprocessor -> discrete digital IC -> semiconductor. The IMP concept reduces board area, BOM cost and software complexity when implementing multi-channel communication endpoints. Key features include the M68000 CPU core running at 16 MHz, three serial communications controllers (SCCs) supporting HDLC/SDLC/UART/Transparent modes, two serial management controllers (SMCs), two peripheral/timer modules, up to four DMA channels, and up to 2 Kbytes of dual-ported system RAM. The device supports a 16-bit data bus and a 24-bit address bus, four external chip-select outputs with programmable wait-state generation, and a 5 V single supply. Software compatibility with the broader MC68000 family allows reuse of existing toolchains, compilers, and OS ports. Architecturally, the MC68302 combines the proven 68000 instruction set with RISC-style on-chip peripheral engines connected via an internal bus, allowing the CPU to offload bit-rate-oriented protocol work to dedicated hardware. This architecture delivers deterministic throughput on multiple HDLC channels while leaving CPU cycles available for the upper-layer protocol stack and management plane. Typical applications include multi-channel WAN routers and bridges, ISDN terminal adapters, telecom line cards, industrial serial concentrators, and legacy networking equipment. The combination of an industry-standard CPU and on-chip communications peripherals also makes the part attractive for protocol-conversion gateways and embedded control planes where deterministic I/O is required. When designing with this device, allocate the 132-pin PGA footprint on a through-hole or pin-grid-array compatible PCB, provide a 5 V supply with adequate decoupling near the supply pins, and use a Motorola-compatible toolchain (such as a 68K compiler and a BDM or background-debug interface) for firmware bring-up. Note that this part contains lead and is RoHS non-compliant; it is now considered a legacy/extended-life component with new designs expected to migrate to RoHS-compliant successors. This page synthesizes distributor pricing, the pin-equivalent same-family alternatives, and practical design notes not found in the original manufacturer datasheet.

RFQ Contact
MC68302RC20C - M68302 20MHz Integrated Multiprotocol Processor | NXP
MC68302RC20C

MC68302RC20C - M68302 20MHz Integrated Multiprotocol Processor | NXP

The NXP MC68302RC20C is a 20 MHz integrated multi-channel communications processor that combines an MC68000/MC68008 microprocessor core with a flexible communications architecture on a single chip, housed in a 132-pin ceramic PGA (Pin Grid Array) package measuring 34.5 x 34.5 mm. The MC68302 was the first device to offer the benefits of a closely coupled, industry-standard M68000 core with on-chip DMA, serial communications channels, and parallel I/O, making it a versatile building block for networking and communications products. An integrated multiprotocol processor (IMP) is a system-on-chip device that merges a general-purpose CPU with peripheral communication controllers, reducing the bill of materials for routers, bridges, and embedded communication nodes compared with discrete CPU-plus-ASIC designs. Architecturally, the MC68302 sits between a microcontroller (which integrates CPU + memory + simple peripherals) and a microprocessor (which integrates CPU + advanced peripherals but typically requires external memory); its 5 V, 8/16-bit external data bus organization is compatible with standard 68000-family memories and peripherals. Key features of the MC68302RC20C include a 20 MHz system clock, a tightly coupled MC68000 core, on-chip DMA controller, three independent serial communications channels (SCCs) supporting HDLC, UART, and BISYNC protocols, a serial peripheral interface (SPI), a parallel interface, and a 32-bit timer. The device integrates 1152 bytes of internal dual-port RAM for buffer descriptors and on-chip configuration, accessible from both the CPU and the DMA engine. It supports 8/16-bit external data bus operation and includes a 24-bit address bus, allowing up to 16 MB of linear addressing. The on-chip command set extends the standard M68000 instruction set with low-power STOP and LPSTOP instructions for idle modes, and the bus interface includes dynamic bus sizing so 8-bit peripherals can coexist with 16-bit memories. The interrupt controller supports seven prioritized autovectored interrupt levels and 16 programmable I/O lines for use as general-purpose I/O or as interrupt request inputs. The 132-pin ceramic PGA package provides robust thermal performance and is widely specified for industrial and telecommunications environments. Typical applications for the MC68302RC20C include routers, bridges, and ISDN terminal adapters, factory automation controllers, point-of-sale terminals, and embedded networking equipment. Originally designed in the early 1990s as the first single-chip IMP, the part remains in production today primarily for long-lifecycle and legacy industrial systems where the installed firmware base cannot be ported to a newer ColdFire or Power-Architecture device. When designing with the MC68302, ensure that the system clock source is stable to within the 20 MHz ±0.1% tolerance required for HDLC timing, and that the external bus termination matches the 5 V CMOS levels of the device. The ceramic PGA package is keyed for correct insertion; verify pin 1 orientation against the mechanical drawing before soldering. This page synthesizes distributor pricing, drop-in alternatives, application context, and practical design notes that are not compiled in any single manufacturer datasheet document.

RFQ Contact
MC68306AG16B - 16MHz Integrated EC000 MPU | NXP | 144-LQFP
MC68306AG16B

MC68306AG16B - 16MHz Integrated EC000 MPU | NXP | 144-LQFP

The NXP MC68306AG16B is an integrated 32-bit microprocessor from the M683xx family that combines a 68EC000 CPU core with system-level peripherals in a single 144-pin LQFP (20x20) package. It operates at 16 MHz over a 5V supply, providing 68000-class performance with integrated glue logic that reduces external component count for embedded control designs. A microprocessor (MPU) is the central processing unit of an embedded computing system, typically paired with external memory and peripherals via an external bus. The 68000/68EC000 family sits in the hierarchy of 32-bit CISC microprocessors -> M68000 family -> Motorola/Freescale/NXP M683xx integrated processors -> embedded industrial control. The MC68306 specifically integrates the 68EC000 core with common system peripherals, eliminating the need for external bus arbitration, interrupt controllers, and chip-select logic that discrete 68000 designs require. Key features include 16 MHz CPU clock, 32-bit internal data path with 16-bit external data bus (EC000 core), 24-bit address bus, integrated peripherals (timers, serial, parallel I/O, interrupt controller, chip-select logic), and a wide 5V operating supply. The 144-LQFP package provides ample I/O for the integrated peripheral set while remaining hand-solderable for prototypes. Architecturally, the MC68306 separates the CPU core from the peripheral bus, allowing peripheral operations to occur in parallel with CPU execution. The 68EC000 core uses a simplified 16-bit external data path versus the full MC68000's 32-bit path, reducing bus complexity while preserving the 32-bit internal register set. Typical applications include industrial process control, point-of-sale terminals, medical instrumentation, building automation controllers, automotive body electronics, and legacy equipment maintenance. The integrated peripherals make it suitable for designs where board space, BOM count, and reliability are priorities. When designing, ensure the 5V supply rail is clean and decoupled with 0.1uF and 10uF capacitors near each power pin. The EC000's 16-bit external bus requires careful PCB trace length matching (within 1 inch) for memory accesses above 8 MHz to prevent bus errors. This page synthesizes distributor pricing, drop-in alternatives, lifecycle status, and practical design notes from the NXP product brief, complementing the official datasheet with actionable engineering context.

RFQ Contact
MC68306CEH16B - 16MHz 32-Bit Integrated EC000 MPU | NXP
MC68306CEH16B

MC68306CEH16B - 16MHz 32-Bit Integrated EC000 MPU | NXP

The NXP MC68306CEH16B is an integrated 32-bit microprocessor based on the MC68EC000 core, delivered in a 132-pin bumpered PQFP package at 16 MHz. It combines an EC000 processor core, system integration logic, DRAM controller, serial channel, timers, and chip-select logic in one device, replacing multiple discrete 68000-family glue chips with a single IC. Background: An MPU (microprocessor unit) is the central processing element of an embedded system. The 68000/EC000 family is a CISC 32-bit architecture with a 16-bit external data bus, widely used in industrial control, automotive body electronics, telecommunications, and legacy embedded designs. The MC68306 specifically targets systems that need 68000-class CPU performance plus built-in peripherals (DRAM controller, UART, timers, parallel I/O, interrupt controller, chip-select logic), enabling engineers to build compact MPU-based boards with minimal external logic. Within the broader taxonomy: MPU -> microprocessor -> processor -> digital IC -> semiconductor. Key features: 16 MHz clock, 32-bit internal architecture with 16-bit external data bus, integrated DRAM controller with refresh, two DMA channels, dual serial channels (UART), 16-bit timer, 8-bit parallel I/O port, eight chip-select outputs, interrupt controller, and 5 V I/O. The 132-pin bumpered PQFP (24.13 mm x 24.13 mm) provides robust lead compliance and reliable solder joints through thermal cycling - important for industrial and automotive-grade assemblies. The MC68306EC000 core executes the M68000 instruction set, supports seven address modes and 14 data types, and includes a hardware multiply/divide unit. To deliver M68000-class performance, the device integrates common system peripherals so designers spend less time building glue logic and more time on application code. The 16 MHz version (CEH16B suffix) targets applications where the 8 MHz or 10 MHz variants are too slow but full 25 MHz operation is unnecessary, balancing cost and performance for typical control loops and protocol stacks. Typical applications include industrial process controllers, building automation controllers, point-of-sale terminals, automotive body controllers, legacy communications equipment, printer controllers, and embedded control boards requiring 68000 software compatibility. Designers often select it for long-life-cycle products where re-validation costs are prohibitive and the mature toolchain (GNU m68k-elf, Diab, GCC) and RTOS support (OSEK, RTEMS, SMX) are well established. When designing with this part, ensure the 5 V supply is well-decoupled with 100 nF ceramic caps near each VCC pin and a bulk 10 uF tantalum or aluminum-polymer cap. The 16 MHz bus requires careful PCB layout: keep traces short, maintain a continuous ground plane under the PQFP, and route the clock signal first. Also plan for the MC68306's address bus to drive memory directly - bus loading analysis is recommended when adding external peripherals. This page synthesizes distributor pricing, drop-in NXP alternatives, comparison with the MC68332 and MC68HC16Z1, and practical design notes not found in the manufacturer datasheet - giving engineers a single source for procurement, selection, and PCB implementation guidance.

RFQ Contact
MC68306EH16BR2 - 16MHz EC000 MPU, 132-PQFP | NXP/Freescale
MC68306EH16BR2

MC68306EH16BR2 - 16MHz EC000 MPU, 132-PQFP | NXP/Freescale

The NXP (formerly Freescale) MC68306EH16BR2 is a 32-bit integrated EC000 microprocessor (MPU) from the M683xx Coldfire/M68K family, operating at 16 MHz and housed in a 132-pin Plastic Quad Flat Pack (PQFP) package measuring 24.13 mm x 24.13 mm. It integrates a 32-bit EC000 core with on-chip peripherals and DRAM controller, providing a single-chip embedded processing solution for industrial control, telecom, and legacy M68K designs. The device is currently listed as Obsolete per distributor stock pages, with remaining inventory available through authorized distributors and aftermarket suppliers. An MPU (Microprocessor Unit) is a CPU-centric integrated circuit that requires external memory and peripherals to form a complete system. The M68K family traces its lineage to the Motorola 68000 architecture introduced in 1979, which pioneered a flat 32-bit programming model and orthogonal instruction set. The MC68306 specifically integrates the EC000 core with system glue logic - DRAM controller, chip-select logic, timers, and serial ports - to reduce total BOM in cost-sensitive embedded designs. Within the broader taxonomy, the MC68306 sits under microprocessor -> MPU -> 32-bit processor -> embedded processor -> integrated circuit. Key features include a 16 MHz maximum clock frequency, 5.0 V I/O voltage, single 32-bit core, and integrated DRAM controller. The PQFP-132 package supports surface-mount assembly on legacy through-hole-friendly footprints and remains compatible with the original 68306 reference designs. The architecture retains M68K instruction compatibility, allowing code developed for earlier 68000/68306 designs to migrate without software rewrites. The part supports up to 4 GB of address space through 32-bit linear addressing. Typical applications include industrial automation controllers, telecommunications infrastructure, point-of-sale terminals, legacy M68K embedded systems, and factory automation equipment. The integrated DRAM controller and chip-select logic reduce external component count compared to discrete CPU implementations. Designers continue to specify the MC68306EH16BR2 for maintenance of installed bases and for long-life-cycle industrial systems where requalification costs discourage migration to newer architectures. When designing with this device, note that the part is Obsolete per current distributor listings (as of 2026-10-16); consider NXP's recommended migration path to ColdFire MCF5208 or similar modern M68K-compatible devices for new designs. PCB layout must accommodate the 132-pin PQFP footprint with adequate thermal relief. Decoupling capacitors should be placed close to the multiple VCC/GND pairs. This page synthesizes distributor pricing, lifecycle status, and migration options not found in the original manufacturer datasheet.

RFQ Contact
MC68331CAG25 - 32-bit M68300 MCU 25MHz | NXP LQFP-144
MC68331CAG25

MC68331CAG25 - 32-bit M68300 MCU 25MHz | NXP LQFP-144

The NXP Semiconductors MC68331CAG25 is a highly-integrated 32-bit microcontroller from the M68300 ColdFire/CPU32 family, operating at 25 MHz and housed in a 144-pin LQFP package measuring 20x20 mm. A 32-bit microcontroller is a microprocessor core with on-chip peripherals, memory interfaces, and I/O designed for embedded control. The MC68331 builds its system from standardized functional modules - the CPU32 processor core, a System Integration Module (SIM), a General Purpose Timer (GPT), and a Queued Serial Module (QSM) - that interconnect through a common Intermodule Bus (IMB). This modular taxonomy places the device in the larger hierarchy of CPU -> MPU -> microcontroller -> embedded processor -> semiconductor. Key features include 25 MHz CPU32 core performance, ROMless architecture for flexible external program memory, 18 programmable I/O lines, internal oscillator support, and a 144-pin LQFP (20x20 mm) footprint. The SIM integrates chip-select logic, interrupt control, and bus arbitration; the GPT supplies configurable timers for event capture and waveform generation; the QSM provides queued SPI and SCI/UART channels for asynchronous and synchronous serial communications. The CPU32 core uses a 32-bit Von Neumann architecture with a 32-bit data path and 32-bit address bus. The ROMless variant routes external program fetch through the SIM's chip-select and wait-state logic, enabling large code and data spaces. The modular IMB topology makes peripheral expansion and configuration relatively simple compared with single-block designs. Typical applications include automotive body and chassis controllers, industrial automation and motor drives, robotics, process control, factory automation, and embedded communications gateways where deterministic 32-bit performance and flexible memory mapping are required. When designing with this part, prioritize decoupling and IMB signal integrity: place 0.1 uF ceramic capacitors near each VDD/VSS pair, route the IMB clock with controlled impedance, and verify chip-select timing with worst-case wait-state scenarios. Note that this MPN is marked End of Life on the NXP product page; plan for obsolescence accordingly. This page consolidates distributor pricing, drop-in M68300 alternatives, and design considerations not assembled in the manufacturer datasheet alone.

RFQ Contact
MC68331CEH25 - 25MHz CPU32 M68300 Microcontroller PQFP-132 | NXP
MC68331CEH25

MC68331CEH25 - 25MHz CPU32 M68300 Microcontroller PQFP-132 | NXP

The NXP (formerly Freescale/Motorola) MC68331CEH25 is a 32-bit modular microcontroller built around the CPU32 core running at 25 MHz, packaged in a 132-pin PQFP (24.13 mm x 24.13 mm) and supplied as a ROMless device for external program memory. It integrates a System Integration Module (SIM), a General-Purpose Timer (GPT) and a Queued Serial Module (QSM) on a common intermodule bus (IMB), and is a member of the M68300 modular microcontroller family. According to the NXP product page, the part is announced as End of Life, so engineers should plan replacement now rather than treating the listing as a long-term supply line. A 32-bit microcontroller is an embedded processing IC whose datapath, registers and ALU are 32 bits wide, enabling single-instruction operations on wide data words and larger linear address spaces than 8- or 16-bit parts. The M68300 family belongs to the ColdFire/M68K lineage (CPU32 -> M68k -> ColdFire -> embedded 32-bit MCU) of CISC RISC-style CISC cores, and within NXP's portfolio it sits below the ColdFire MCF5xxx line. The MC68331CEH25 uses the standard M68300 modular IP blocks, which simplifies migration within the family. Key features include 25 MHz CPU32 core performance, ROMless operation for flexible external memory interfacing, the GPT timer block (with capture, compare and pulse-width modulation functions), the QSM providing queued SCI and SPI channels, and the SIM block that handles chip-select generation, system protection, clock synthesis and interrupt prioritization. The 132-pin PQFP footprint gives access to the full external bus plus all on-module peripheral pins. Typical applications include industrial control systems, automotive body and chassis electronics (pre-CAN-era platforms), factory automation, motor control via the GPT PWM outputs, and embedded communication gateways that leverage the QSM serial channels. The 132-pin PQFP package and ROMless architecture make the part attractive where high-performance 32-bit processing is needed alongside custom boot/storage strategies. When designing with this device, ensure the external bus and chip-select signals are properly terminated, the 25 MHz system clock is stable, and the Vcc rails meet the M68300 family DC specifications referenced in the datasheet. Because the part is in NXP's End-of-Life program, source any qualification stock carefully and review the discontinuance notice for the official last-time-buy window and recommended migration target.

RFQ Contact
MC68331CFC25 - 32-Bit 25MHz ROMless MCU | NXP
MC68331CFC25

MC68331CFC25 - 32-Bit 25MHz ROMless MCU | NXP

The NXP Semiconductors MC68331CFC25 is a 32-bit, 25 MHz ROMless microcontroller IC in a 132-pin PQFP package measuring 24.13 mm by 24.13 mm. It combines a CPU32 processor with system integration and communications peripherals for embedded control applications. The verified distributor listing identifies the device as a ROMless MCU, while the manufacturer description identifies the CPU32, System Integration Module (SIM), General Purpose Timer (GPT), and Queued Serial Module (QSM). A microcontroller is a semiconductor that integrates a processor core, memory interface, peripherals, and control logic into one device. The MC68331 belongs to the MCU32 embedded-processing hierarchy and uses a common intermodule bus, or IMB, to connect its internal modules. This architecture makes it useful where a system needs deterministic control, serial communication, timer functions, and external memory access without a dedicated host processor. The verified device identity specifies a 32-bit architecture, 25 MHz operating frequency, ROMless configuration, and 132-PQFP package. The MC68331CFC25 suffix indicates a specific package, temperature, and speed ordering configuration, but detailed electrical limits, memory sizes, peripheral ratings, and operating-temperature values were not included in the supplied verified data. Those parameters are therefore not inferred here. The manufacturer’s product page is the appropriate source for confirming the complete technical configuration before design-in. Typical application domains include industrial equipment, communications controllers, motion or sequencing systems, and other embedded platforms that benefit from the CPU32 architecture. In a typical design, the CPU32 executes control software from external memory, while the SIM, GPT, and QSM modules support system integration, timing, and serial communication. The 132-pin PQFP package provides a substantial pin count for external bus, memory, peripheral, control, and signal connections. The primary design consideration is that the MC68331 is ROMless: external memory is required for program storage or data storage according to the system architecture. Engineers should verify memory-interface compatibility, peripheral multiplexing, pin assignments, clock requirements, and electrical constraints against the manufacturer datasheet before layout or firmware deployment. This page consolidates the verified distributor identity, manufacturer architecture description, package information, sourcing links, and engineering limitations for MC68331CFC25. It intentionally avoids unsupported claims about unprovided electrical specifications and distinguishes confirmed facts from data requiring a datasheet review.

RFQ Contact