Products (22,000+)

MKL05Z8VFK4 - 48MHz Cortex-M0+ MCU, 8KB Flash | NXP
MKL05Z8VFK4

MKL05Z8VFK4 - 48MHz Cortex-M0+ MCU, 8KB Flash | NXP

The NXP Semiconductors MKL05Z8VFK4 is an ultra-low-power 32-bit Kinetis KL0 microcontroller built around an Arm Cortex-M0+ processor operating at up to 48 MHz. The device provides 8 KB of Flash program memory, 1 KB of SRAM, a 12-bit ADC with 12 channels, and operates across 1.8 V, 2.5 V, and 3.3 V supply options. It is housed in a 24-QFN package measuring 4 mm by 4 mm. A microcontroller is a programmable integrated circuit that combines a processor core, memory, peripherals, and input/output interfaces on one chip. The MKL05Z8VFK4 belongs to the Kinetis L series and provides a migration path from simple 8-bit designs into 32-bit embedded systems. Its Cortex-M0+ core uses the Arm Thumb instruction set and is software and tool compatible with other Kinetis L series devices. The principal features include a 48 MHz operating frequency, 8 KB Flash, 1 KB SRAM, and a 12-channel 12-bit analog-to-digital converter. The 24-QFN package supports compact PCB layouts, while the exposed-pad construction assists heat transfer from the device. Industrial-grade sourcing information identifies the part with a no-lead square package and 24 terminals. The MKL05Z8VFK4 is suitable for industrial control, compact sensor nodes, portable measurement equipment, low-power monitoring systems, and basic embedded-control products. Its small memory footprint favors lightweight firmware that performs acquisition, state-machine control, communications, and local actuation without requiring a high-end processor. The ADC enables analog sensor interfaces without a separate converter on systems that have available I/O and design constraints. When laying out the circuit, use the manufacturer's pin-description table to assign every 24-QFN terminal and preserve the exposed-pad connection specified by the datasheet. Place decoupling capacitors close to the supply terminals and route sensitive analog inputs away from switching nodes. Confirm the startup, clock, and reset configuration in the manufacturer datasheet before committing the firmware and board layout. This page combines manufacturer lifecycle information, distributor technical summaries, package details, application guidance, and a constrained drop-in comparison for engineers evaluating the MKL05Z8VFK4. Because no explicit quantity-break price was shown, current commercial terms, stock status, and lead time should be requested through the Request a Quote form on this page.

RFQ Contact
MKL05Z8VFM4 - 48MHz Cortex-M0+ 32-QFN MCU | NXP
MKL05Z8VFM4

MKL05Z8VFM4 - 48MHz Cortex-M0+ 32-QFN MCU | NXP

NXP Semiconductors MKL05Z8VFM4 is an ultra-low-power 32-bit Kinetis KL0 microcontroller built around an Arm Cortex-M0+ processor operating at 48 MHz. The device provides 8 KB of flash memory and 1 KB of SRAM in a 32-pin HVQFN package measuring 5 mm by 5 mm. Its combination of compact packaging, embedded memory, and low-power-oriented design makes it suitable for space-constrained embedded control systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripheral interfaces into one device. The Kinetis KL0 family belongs to the broader Kinetis L series of Arm Cortex-M0+ microcontrollers and provides an entry point for designers migrating from 8-bit embedded architectures. NXP describes the KL0 family as software- and tool-compatible with other Kinetis L series devices, supporting a connected development and migration path. The MKL05Z8VFM4 core operates at 48 MHz and includes 8 KB of flash for firmware and 1 KB of SRAM for working data. Its 32-bit Arm Cortex-M0+ architecture provides a larger addressable data space than a conventional 8-bit controller while retaining a simple peripheral and software model. The 5 mm by 5 mm HVQFN package supports compact PCB layouts while exposing a larger set of connections than a basic dual in-line package. Ultra-low-power operation is the principal technical emphasis of the Kinetis KL0 family. NXP positions these devices as a bridge from 8-bit designs into the Kinetis portfolio, where power-conscious embedded systems can use a 32-bit architecture without adopting a larger general-purpose microcontroller. Sleep behavior, clock configuration, run-mode current, and peripheral shutdown options should be evaluated against the actual sensing, communications, and control workload before finalizing the power budget. Typical uses include compact sensor nodes, building-access controls, small industrial controllers, battery-operated accessories, and connected products that require deterministic control in a constrained footprint. The 8 KB flash capacity is suitable for compact applications that do not require a large graphical interface, extensive protocol stack, or long application code. Firmware size, stack requirements, bootloader support, and middleware memory use should be measured during software bring-up. PCB design should follow the manufacturer land pattern for the 32-pin HVQFN, including the exposed thermal pad, pad dimensions, solder-mask definition, and paste stencil. Maintain a low-resistance ground plane, keep sensitive timing and programming interfaces away from noisy switching nodes, and validate the power network for transient response. The exposed pad must be thermally connected through solder and copper according to the package land pattern. This product page combines the manufacturer's core device identification with package, memory, application, and sourcing guidance. It also distinguishes confirmed drop-in replacements from related Kinetis options, helping engineers determine whether a board can be reused without changing the footprint, firmware assumptions, memory budget, or peripheral configuration.

RFQ Contact
MKL05Z8VLC4 - 48MHz Cortex-M0+ 8KB MCU | NXP
MKL05Z8VLC4

MKL05Z8VLC4 - 48MHz Cortex-M0+ 8KB MCU | NXP

The NXP Semiconductors MKL05Z8VLC4 is a 48 MHz ARM Cortex-M0+ microcontroller with 8 KB of Flash memory, 1 KB of SRAM, and a 32-LQFP 7 x 7 mm package. It operates from 1.8 V, 2.5 V, or 3.3 V supply levels and combines an ultra-low-power design with serial interfaces and analog peripherals for compact embedded systems. An ultra-low-power microcontroller is a semiconductor designed to minimize energy consumption while executing control, measurement, and communication tasks. The Kinetis KL05 family belongs to the ARM Cortex-M0+ class of 32-bit embedded processors and provides a practical entry point for cost-sensitive, low-power systems. Its small memory footprint suits simple control nodes, while the selectable operating voltages support both 3.3 V industrial electronics and lower-voltage portable equipment. The MKL05Z8VLC4 provides a 48 MHz ARM Cortex-M0+ core, 8 KB of Flash program memory, and 1 KB of SRAM. Multiple serial interfaces allow connections to sensors, transceivers, memory devices, and external controllers. Analog peripherals support embedded measurement and control, while the 32-LQFP package provides a conventional surface-mount form factor with visible leads for inspection and rework. The device is positioned as the entry point to the Kinetis L series, combining an ARM Cortex-M0+ instruction set with low-power operation and integrated peripherals. Its 8 KB Flash capacity is intended for compact firmware rather than graphical interfaces or large protocol stacks. The 1 KB SRAM supports working variables, stack storage, and short communication buffers, so application architecture should avoid unnecessary RAM copies and large frame buffers. Typical uses include low-power sensor nodes, small industrial controllers, battery-powered accessories, compact data loggers, and embedded communication modules. The selectable 1.8 V, 2.5 V, and 3.3 V operating levels simplify connection to mixed-signal and portable systems. Its serial interfaces can also bridge external sensors or communication modules while the analog peripherals handle local thresholding, filtering, or control functions. When designing a board around the MKL05Z8VLC4, verify the complete pin assignment and peripheral multiplexing in the manufacturer datasheet before routing PCB traces. Place decoupling capacitors close to the supply pins, keep sensitive analog routes compact, and use the package ground and power pins for low-noise return paths. Software should also respect the limited 8 KB Flash and 1 KB SRAM budgets. This product page combines the exact orderable MPN, package details, operating specifications, same-family alternatives, application guidance, and engineering-focused design notes to support component selection and PCB planning.

RFQ Contact
MKL13Z64VLH4 - 48MHz Cortex-M0+ 64KB MCU | NXP
MKL13Z64VLH4

MKL13Z64VLH4 - 48MHz Cortex-M0+ 64KB MCU | NXP

NXP Semiconductors MKL13Z64VLH4 is an ultra-low-power Kinetis KL13 microcontroller with a 48 MHz 32-bit Arm Cortex-M0+ core, 64 KB of Flash memory, and a 64-LQFP 10 x 10 mm package. It is designed for portable applications that require USB device support, analog peripherals, and low-power embedded control. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The Kinetis KL13 belongs to the microcontroller, embedded processor, and power-management hierarchy for compact battery-operated equipment. Its Arm Cortex-M0+ architecture supports efficient event-driven control, while integrated communication and analog interfaces reduce the number of external components required around the MCU. The MKL13Z64VLH4 combines a 48 MHz operating frequency with 64 KB of programmable Flash and 8 KB of SRAM. Connectivity includes FlexIO, I2C, IrDA, SPI, and UART/USART, while peripheral resources include DMA, PWM, a watchdog timer, and analog functions. USB device support adds a practical interface for portable equipment that must exchange data with a host while keeping the implementation compact. The 64-LQFP package provides 64 externally accessible connections in a 10 x 10 mm footprint. Its single Arm Cortex-M0+ core executes 32-bit instructions, and the device belongs to the Kinetis KL1 general-purpose, ultra-low-power MCU family. Tool support includes Keil MDK and Keil Studio, allowing firmware development through the Arm software environment while retaining access to standard peripheral drivers and debugging workflows. Typical uses include USB-connected portable instruments, compact data loggers, industrial sensing nodes, battery-powered accessories, and small control boards. The device is particularly appropriate when a design needs a 48 MHz control loop, moderate embedded memory, and multiple serial interfaces without moving to a higher-performance Cortex-M3 or Cortex-M4-class MCU. PCB design should preserve the exact 64-LQFP land pattern and route high-speed or sensitive USB signals according to the manufacturer’s reference guidance. Validate power sequencing, decoupling, clock stability, and the analog reference network on the assembled prototype; checking only nominal operating conditions can conceal startup, noise, or signal-integrity problems. This page combines the manufacturer’s product description, distributor identification, cross-reference results, practical design guidance, and a parameter comparison focused on selecting or replacing this exact microcontroller. It also separates confirmed technical facts from information that must be confirmed in the datasheet before a new PCB or firmware branch is released.

RFQ Contact
MKL13Z64VLK4 - 48MHz Cortex-M0+ 64KB MCU | NXP
MKL13Z64VLK4

MKL13Z64VLK4 - 48MHz Cortex-M0+ 64KB MCU | NXP

The NXP Semiconductors MKL13Z64VLK4 is a general-purpose 32-bit Arm Cortex-M0+ microcontroller with a 48 MHz maximum clock frequency, 64 KB flash memory, and 8 KB SRAM, housed in an 80-pin LQFP package measuring 12 mm by 12 mm. It is designed for compact embedded systems requiring efficient processing, low-power operation, analog peripherals, and mixed-signal control. A microcontroller is an integrated circuit that combines a processor core, program memory, data memory, and peripherals on one semiconductor die. The MKL13Z64VLK4 belongs to the NXP Kinetis KL1x family, which extends the Kinetis KL0x portfolio with additional memory, communications, and analog peripheral options. Its Arm Cortex-M0+ core uses a compact instruction set intended for cost-sensitive embedded control, while the 48 MHz operating frequency provides adequate performance for sensor conditioning, communications, and real-time control tasks. The device provides 64 KB of flash for program storage and 8 KB of SRAM for working data. Its 70 general-purpose I/O pins support integration with displays, sensors, actuators, communication transceivers, and industrial interfaces. The manufacturer describes the Kinetis KL1x family as an ultra-low-power general-purpose MCU platform, making it suitable for designs where average current consumption is as important as processing capability. The 80-pin LQFP package exposes substantially more I/O than smaller microcontroller packages, reducing the need for external I/O expanders in mixed-signal systems. NXP positions the KL1x family as compatible with other Kinetis KL-series devices, which can simplify firmware and peripheral-driver reuse during product migrations. The MKL13Z64VLK4 also belongs to a broader ecosystem that includes Kinetis KL2x, KL3x, and KL4x microcontrollers. Typical uses include industrial sensor nodes, building automation modules, portable measurement equipment, low-power data loggers, and USB-connected portable products. A 16-bit ADC resolution is specified for the family variant, supporting analog measurements that require more precision than a basic 8-bit or 10-bit input. The combination of 8 KB SRAM, 70 I/O, and 48 MHz processing supports moderate real-time workloads without an external processor. PCB design should preserve clean analog and digital power distribution, especially when the MCU drives sensors or communication modules. Place decoupling capacitors close to the supply pins, route high-current outputs away from sensitive analog inputs, and use continuous ground-plane connectivity beneath the LQFP footprint. Confirm the exact pin assignments and alternate-function multiplexing in the manufacturer datasheet before finalizing a board layout. This product overview combines the manufacturer device positioning with package, memory, core, frequency, and I/O characteristics, then adds selection guidance, application context, and design-focused considerations. The resulting engineering view helps distinguish MKL13Z64VLK4 from parts with different core types, memory capacities, package dimensions, or operating-temperature grades.

RFQ Contact
MKL14Z32VFT4 - 48MHz Cortex-M0+ MCU | NXP Semiconductors
MKL14Z32VFT4

MKL14Z32VFT4 - 48MHz Cortex-M0+ MCU | NXP Semiconductors

The NXP Semiconductors MKL14Z32VFT4 is a 32-bit ARM Cortex-M0+ Kinetis KL1 microcontroller operating up to 48 MHz, with 32 KB of flash memory and 4 KB of SRAM in a 48-pin QFN package measuring 7 x 7 mm. The device combines an energy-efficient RISC core, integrated USB connectivity, low-power operating modes, and mixed-signal peripherals for cost-sensitive embedded systems. An ARM Cortex-M0+ microcontroller is a compact 32-bit processor designed for embedded control, sensor, communication, and human-interface applications. The M0+ architecture provides a simple instruction set, efficient interrupt handling, and low computational overhead, while belonging to the broader embedded MCU and semiconductor hierarchy. NXP positions the Kinetis KL1 family as an ultra-low-power platform with additional memory, communications, and analog peripheral options compared with the KL0 family. The MKL14Z32VFT4 provides 32 KB of flash organized as 32K x 8, together with 4 KB of SRAM for working memory. Its supported 1.8 V, 2.5 V, and 3.3 V operating options allow the microcontroller to integrate into different embedded supply architectures. The 48 MHz Cortex-M0+ core is suitable for control loops, protocol handling, data acquisition, and low-to-moderate computation without requiring a higher-performance Cortex-M core. Low-power modes are central to the device's design. When continuous CPU execution is unnecessary, the microcontroller can reduce activity through its low-power operating modes, helping conserve energy in battery-operated equipment. The NXP product overview identifies integrated USB connectivity, low-power modes, and a compact package as defining features. Detailed peripheral counts, GPIO configuration, clock-tree options, and current-consumption limits should be confirmed in the manufacturer data sheet before final schematic and firmware design. Typical applications include USB-connected data loggers, compact sensor nodes, industrial control modules, wearable accessories, consumer peripherals, and embedded human-interface systems. Its combination of 32 KB flash, 4 KB SRAM, USB connectivity, and a 7 x 7 mm footprint is particularly useful where board space and energy efficiency matter. The exposed-pad package also requires a deliberate PCB thermal and grounding layout to achieve reliable performance. The most important design consideration is package and firmware compatibility. Use the 48-pin QFN pin-description table in the manufacturer data sheet when assigning tracks and lands, and route the exposed pad as directed for electrical and thermal performance. Firmware allocation must remain within the 32 KB flash and 4 KB SRAM limits, while production programming and low-power behavior should be validated across the complete operating and temperature range. This product page combines manufacturer and distributor specifications with application-focused engineering guidance, package details, sourcing information, and an explicit comparison with related Kinetis microcontrollers. It helps engineers identify whether the MKL14Z32VFT4 provides enough memory, processing speed, connectivity, and package density for a new embedded design without overlooking migration or firmware constraints.

RFQ Contact
MKL14Z32VLK4 - 48MHz Cortex-M0+ 32KB MCU | NXP
MKL14Z32VLK4

MKL14Z32VLK4 - 48MHz Cortex-M0+ 32KB MCU | NXP

The NXP MKL14Z32VLK4 is a general-purpose 32-bit Kinetis KL1 microcontroller with a 48 MHz Arm Cortex-M0+ core, 32 KB of flash memory, and 4 KB of SRAM in an 80-LQFP package. It is designed for low-power embedded control, connected sensing, consumer accessories, and industrial systems that require efficient processing without a high-pin-count complex package. A microcontroller is a programmable integrated circuit that combines a processor core, nonvolatile program memory, volatile data memory, and peripherals on one device. The MKL14Z32VLK4 belongs to the Kinetis KL1 family, whose hierarchy is Kinetis microcontroller, 32-bit microcontroller, Arm Cortex-M0+ MCU, and ultra-low-power embedded controller. This family is positioned for compact control systems that need more capability than a basic 8-bit device without the cost and complexity of a higher-end Cortex-M4 processor. The device operates at up to 48 MHz and includes 32 KB of flash for firmware and 4 KB of SRAM for working data. Its 80-LQFP package exposes substantially more interface pins than small QFN devices, making it useful where external sensors, displays, communications, debug functions, or mixed-signal interfaces are required. The manufacturer identifies this exact orderable part as active, supporting design continuity for new embedded-product programs. Kinetis KL1 devices provide a common family architecture and a migration path toward higher-end Kinetis families. This makes the MKL14Z32VLK4 appropriate for volume controllers in which deterministic low-power operation, conventional through-hole-package inspection, and ecosystem-compatible development practices are important. The large package also simplifies prototyping with accessible leads and reduces the need for fine-pitch assembly during board bring-up. Typical uses include low-power sensor nodes, compact motor controllers, building-access peripherals, battery-powered data loggers, measurement instruments, and communication equipment. In these systems, the microcontroller executes real-time control logic, manages peripheral interrupts, and supports low-power states between active operations. Its 32-bit architecture and 48 MHz clock rate provide ample headroom for protocol handling and control algorithms while retaining a straightforward embedded profile. PCB planning should preserve the 80-pin land pattern, power and decoupling requirements, clock configuration, and exposed programming or debug signals specified by the manufacturer datasheet. Check all alternate-function assignments and peripheral pin multiplexing before routing. Firmware should also account for the exact 32 KB flash and 4 KB SRAM limits, particularly when using bootloader space, logging, protocol buffers, or field-upgrade mechanisms. This product page combines the exact electrical and memory characteristics, package information, lifecycle status, sourcing workflow, and engineering design guidance for the MKL14Z32VLK4. It also provides a structured comparison with related Kinetis KL1 choices and highlights the memory and peripheral trade-offs that determine whether a board revision can remain pin compatible.

RFQ Contact
MKL14Z64VFM4 - 48MHz Cortex-M0+ MCU | NXP Semiconductors
MKL14Z64VFM4

MKL14Z64VFM4 - 48MHz Cortex-M0+ MCU | NXP Semiconductors

The NXP Semiconductors MKL14Z64VFM4 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller operating up to 48 MHz, with 64 KB of Flash memory and 8 KB of SRAM, housed in a 32-pin HVQFN package measuring 5 mm by 5 mm. It supports 1.8 V, 2.5 V, and 3.3 V supply configurations and includes USB support for portable connected products. An ultra-low-power microcontroller is a semiconductor designed to balance processing capability with minimized energy consumption. The Kinetis KL14 family extends the Kinetis KL1 low-power portfolio with additional memory, communications, and analog peripheral options. Within the product hierarchy, the MKL14Z64VFM4 is a microcontroller, embedded processor, and power-management-aware system-on-chip suitable for portable IoT, sensing, and connected embedded systems. Three headline characteristics define this device: a 48 MHz Cortex-M0+ processor, 64 KB of embedded Flash storage, and a compact 32-HVQFN package. Its operating-temperature range extends from -40 °C to 105 °C, making it suitable for industrial and embedded environments with broad temperature requirements. The 5 mm by 5 mm QFN format also supports compact board layouts while exposing the package’s pins and thermal pad according to the manufacturer’s land-pattern guidance. The KL14 architecture combines a real-time Cortex-M0+ core with low-power operating modes and integrated peripherals for connected embedded designs. Its 8 KB SRAM provides working memory for protocol stacks, sensor processing, and control routines, while the 64 KB Flash region supports resident firmware and configuration data. USB support expands the device’s usefulness for portable data acquisition, configuration interfaces, and peripheral connectivity without requiring a separate USB controller. Typical applications include portable IoT sensors, low-power data loggers, industrial sensing nodes, USB-connected measurement equipment, compact motor or actuator controllers, and wearable accessories. In these systems, the microcontroller can manage sensor acquisition, local filtering, communications, and low-power duty cycling while retaining enough memory for embedded firmware. The 48 MHz clock also allows the core to service time-sensitive control and communication tasks efficiently. When designing a board around the MKL14Z64VFM4, follow the manufacturer’s 32-HVQFN land pattern, exposed-pad, and soldering requirements exactly. Place decoupling capacitors close to the supply pins, keep sensitive signal routes away from fast-switching nodes, and program unused pins according to the device guidelines. Confirm clock, USB, communication, and low-power behavior against the manufacturer datasheet for the selected board configuration. This product page combines the exact device identity, core and memory configuration, package data, lifecycle information, qualified same-family alternatives, and engineering-focused selection guidance. It also organizes PCB, power, and design considerations around the MKL14Z64VFM4 so engineers can evaluate the MCU before beginning a connected, low-power embedded design.

RFQ Contact
MKL14Z64VFT4 - 48MHz Cortex-M0+ MCU, 64KB Flash | NXP
MKL14Z64VFT4

MKL14Z64VFT4 - 48MHz Cortex-M0+ MCU, 64KB Flash | NXP

The NXP Semiconductors MKL14Z64VFT4 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller operating at up to 48 MHz, with 64 KB of embedded flash memory and a 48-QFN 7 mm × 7 mm package. It supports a 1.71 V to 3.6 V operating range, USB connectivity, a 12-bit ADC, and 40 ADC channels, making it suitable for compact portable, industrial, and connected control systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one device. The MKL14Z64VFT4 belongs to the Kinetis KL1 family and sits within the hierarchy of Cortex-M0+ microcontrollers, 32-bit embedded processors, integrated circuits, and semiconductors. Its low-power design and flexible operating modes are intended for portable systems that must balance responsive control, compact size, and energy efficiency. Key features include an ARM Cortex-M0+ processor with up to 48 MHz operating frequency, 64 KB flash, a 12-bit ADC with 40 channels, and USB connectivity. The 1.71 V to 3.6 V supply range supports common 1.8 V, 2.5 V, and 3.3 V system rails. The 48-QFN 7 mm × 7 mm package provides a compact surface-mount footprint, while the exposed-pad construction supports heat dissipation when required by the board layout. The Cortex-M0+ architecture is designed for straightforward embedded control and low-complexity instruction processing. Its operating frequency provides useful performance margin for digital control, communication, data acquisition, and user-interface tasks without requiring a higher-complexity processor. Integrated USB connectivity can simplify wired peripheral communication, while the multi-channel ADC supports applications requiring several analog inputs in a compact design. Typical applications include USB-connected portable instruments, low-power sensor nodes, industrial monitoring modules, compact motor-control systems, and general embedded control boards. For portable products, the device's low-power orientation and multiple operating modes are useful for reducing energy use between active tasks. For industrial equipment, the 3.6 V maximum supply and compact QFN package fit space-constrained control electronics. PCB design should route the USB interface and analog inputs carefully, keep sensitive analog and digital return currents separated, and provide local supply decoupling at the device pins. Thermal performance depends on the exposed pad, copper area, via pattern, and surrounding board construction, so those details should be evaluated together rather than treating the QFN footprint as an isolated component. This product record combines the manufacturer's device identity and technical characteristics with practical application guidance, package considerations, lifecycle status, and an explicit distinction between verified drop-in substitutes and related Kinetis devices that use different packages. It is intended to help engineers confirm the exact MPN, footprint, electrical requirements, and replacement constraints before committing a design to production.

RFQ Contact
MKL14Z64VLH4 - 48MHz Cortex-M0+ MCU, 64KB Flash | NXP
MKL14Z64VLH4

MKL14Z64VLH4 - 48MHz Cortex-M0+ MCU, 64KB Flash | NXP

The NXP MKL14Z64VLH4 is a 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KL1x sub-family, running up to 48 MHz with 64 KB of on-chip Flash and 8 KB SRAM, packaged in a 64-pin LQFP (10x10 mm). It is engineered for ultra-low-power embedded applications and integrates rich connectivity including I2C, LINbus, SPI, and UART/USART, alongside on-chip peripherals such as Brown-out Detect/Reset, DMA, LVD, POR, PWM, and a Watchdog Timer. Background Knowledge: A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and peripheral interfaces. The Cortex-M0+ is ARM's smallest and most energy-efficient 32-bit core, designed as a successor to 8-bit/16-bit MCUs while retaining ultra-low power consumption. Within NXP's portfolio, the Kinetis KL1x family sits above the KL0x entry-level and below the K2x/KL4x higher-integration families, providing a migration path to the Cortex-M4-based K10 family. Key features include a wide operating voltage range (1.71 V to 3.6 V, with the part typically offered at 1.8 V/2.5 V/3.3 V rails), multiple low-power modes, an internal clock source, and 12-bit ADC plus comparators and touch sensing interfaces on selected variants. The 48 MHz core delivers 0.93 DMIPS/MHz, sufficient for sensor fusion, Human-Machine Interface (HMI), and portable instrumentation consumer designs. Typical applications span ultra-low-power battery-powered IoT end nodes, wearable health and fitness devices, smart home sensor hubs, industrial sensing nodes, automotive body and LIN-bus sub-modules, and consumer HMI panels using segmented LCD or touch interfaces. The combination of low active current and deep-sleep current below 1 microamp enables years of operation from a single coin cell. Design considerations: engineers should evaluate deep-sleep current versus wake-up latency when designing battery-powered nodes. Pin-muxing is extensive on the LQFP-64 footprint; locking the peripheral assignment in the Kinetis configuration tool early avoids late-stage rework. This page synthesizes distributor pricing, drop-in Kinetis alternatives, and practical design notes not consolidated in the manufacturer datasheet alone.

RFQ Contact
MKL14Z64VLK4 - 48MHz Cortex-M0+ 64KB MCU | NXP | USB
MKL14Z64VLK4

MKL14Z64VLK4 - 48MHz Cortex-M0+ 64KB MCU | NXP | USB

The NXP Semiconductors MKL14Z64VLK4 is an ultra-low-power 32-bit microcontroller built around an Arm Cortex-M0+ core operating at up to 48 MHz. It provides 64 KB of Flash program memory, 8 KB of SRAM, integrated USB connectivity, and an 80-pin LQFP package measuring 12 x 12 mm. Its operating supply range is 1.71 V to 3.6 V. An ultra-low-power microcontroller is a compact embedded-processing device designed to execute firmware while minimizing energy consumption during active operation and low-power states. The MKL14Z64VLK4 belongs to the Kinetis KL1 family and combines an Arm Cortex-M0+ processor, Flash memory, SRAM, analog interfaces, communication peripherals, and power-management functions in one package. This integration supports small, energy-conscious control systems without requiring multiple external chips. Key device attributes include 48 MHz maximum operating frequency, 64 KB of Flash memory, and 8 KB of SRAM. The 80-LQFP package provides a high pin count for mixed-signal, communication, and general-purpose embedded applications. The operating temperature range of -40°C to +105°C supports industrial and extended-temperature equipment, while the 1.71 V to 3.6 V supply range permits direct operation from common low-voltage rails. The Arm Cortex-M0+ architecture uses a simple instruction set and deterministic peripheral architecture suited to control loops, human-interface equipment, sensor nodes, and connected accessories. NXP describes the device as part of the Kinetis KL1x family, whose members share compatibility paths across the broader Kinetis KL portfolio. This makes the MKL14Z64VLK4 useful for designs that may later migrate to a device with more memory, performance, or peripheral integration. Typical applications include USB-connected control peripherals, industrial sensor modules, compact data loggers, building and access-control equipment, consumer accessories, and low-power embedded controllers. The USB connectivity is particularly useful when the product must enumerate as a standard USB device while retaining a small-footprint 80-LQFP package. The Cortex-M0+ core and 64 KB Flash also provide sufficient capacity for protocol handling, state-machine control, and local data processing. PCB design should follow the manufacturer pin and package guidance, particularly for decoupling, USB signal routing, analog inputs, and exposed supply pins. Confirm every peripheral assignment and alternate-function pin against the device pin description before routing the PCB. The 80-LQFP footprint also requires careful planning for via-in-pad or lead-exit strategies when assembly density and thermal performance are important. This product page combines the verified NXP product characteristics, package and memory details, sourcing options, same-family drop-in candidates, and practical implementation guidance. These engineering-focused details help distinguish a direct pin-compatible MCU from a broader functional equivalent before any board-level replacement is approved.

RFQ Contact
MKL15Z128VLH4 - 48MHz Cortex-M0+ 128KB Flash MCU | NXP | Kinetis
MKL15Z128VLH4

MKL15Z128VLH4 - 48MHz Cortex-M0+ 128KB Flash MCU | NXP | Kinetis

The NXP Semiconductors MKL15Z128VLH4 is a 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KL1x ultra-low-power family, operating at up to 48 MHz with 128 KB of Flash and 16 KB of SRAM in a 64-pin LQFP (10x10 mm) package. It supports a wide operating voltage range from 1.71 V to 3.6 V and is qualified to AEC-Q100 for automotive applications, with an ambient operating temperature range of -40 °C to +105 °C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O. The Cortex-M0+ is ARM's smallest and most energy-efficient application processor core, optimized for deterministic interrupt response and ultra-low active power. MCUs sit within the hierarchy of embedded computing devices, beneath microprocessors and above simple digital signal controllers; the Kinetis L family specifically targets battery-powered and energy-harvesting designs where milliamp budgets dominate BOM decisions. Key features include an integrated 12-bit SAR ADC with up to 16 channels, a 16-bit ADC option, multiple low-power modes (Wait, Very-Low-Power Wait, Stop, VLLS0/1/3), and NXP's low-power touch sensor interface (TSI). Communications peripherals include I²C, UART, SPI, I²S, and USB 2.0 full-speed OTG with on-chip transceiver. The KL15 sub-family extends the KL0x with additional SRAM, communications options, and analog integration while retaining the same Cortex-M0+ instruction set. Architecturally the MKL15Z128VLH4 uses a 2-bit dual-core implementation with a single-cycle 32x32 hardware multiplier, a 4-channel DMA controller, and a low-leakage wake-up unit. The Flash is organized as 128K x 8 with ECC-style reliability, and the SRAM is 16 KB with parity. The part operates from internal or external references and supports a 4-bit GPIO port configuration across 53 usable I/O pins on the 64-LQFP. Typical applications include portable medical devices, wearable fitness trackers, home automation sensor hubs, automotive body controllers, smart-metering endpoints, USB-capable accessories (HID, game controllers, data loggers), and low-power industrial sensor nodes. The wide voltage range and on-chip USB OTG transceiver make it a common drop-in for legacy Freescale (now NXP) designs migrating to the Cortex-M0+ ecosystem. When designing with the MKL15Z128VLH4, ensure that the supply decoupling follows the KL15 reference manual (one 100 nF per VDD pin, one bulk 4.7 µF) and that the USB VBUS pin sees a regulated 5 V-tolerant rail per the USB OTG specification. For best low-power performance, enter VLLS0 with the low-leakage wake-up unit enabled and avoid leaving floating digital inputs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Contact
MKL15Z128VLH4R - ARM Cortex-M0+ 48MHz MCU, 128KB Flash | NXP
MKL15Z128VLH4R

MKL15Z128VLH4R - ARM Cortex-M0+ 48MHz MCU, 128KB Flash | NXP

The NXP Semiconductors MKL15Z128VLH4R is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller operating at 48 MHz with 128 KB of flash and 16 KB of SRAM, housed in a 64-pin LQFP (10x10 mm) package with tape-and-reel packaging. As a member of the Kinetis KL1x family, the part integrates USB 2.0 OTG full-speed, flexible low-power modes, a 12-bit SAR ADC, and a rich set of serial peripherals. The 'R' suffix indicates tape-and-reel delivery, while the base MKL15Z128VLH4 ships in tray. The 64-LQFP package is the standard footprint across the KL14/KL15/KL16/KL17 families, enabling PCB reuse when scaling designs. An ARM Cortex-M0+ microcontroller is a 32-bit RISC processor core designed by Arm for energy-constrained embedded applications, featuring a 2-stage pipeline, single-cycle 32x32 multiplier, and Thumb-2 instruction set. It belongs to the broader hierarchy of ARM Cortex-M processors (Cortex-M0/M0+/M3/M4/M7), with the M0+ positioned as the most power-efficient tier while retaining full instruction compatibility with larger cores. Kinetis L series microcontrollers specifically target battery-powered and portable devices through aggressive use of multiple low-power modes (Run, Wait, Stop, VLPR, VLPW, VLPS, LLWU). Key features of the MKL15Z128VLH4R include 128 KB program flash, 16 KB SRAM, USB 2.0 full-speed OTG with on-chip transceiver, an 8-channel 12-bit ADC, two 16-bit timers, a low-power timer, RTC, CMP, and multiple serial communication modules (UART, SPI, I2C). The device supports 1.71V to 3.6V supply and provides 54 GPIO pins plus dedicated USB DP/DM. Hardware cryptography, tamper detection, and secure firmware update are not present on this KL15 sub-family, distinguishing it from the higher-end Kinetis K-series. From an architectural perspective, the M0+ core delivers 0.93 DMIPS/MHz while drawing only 9 uA/MHz in Run mode at 3V, and as low as 2.1 uA in VLPS mode with RTC retention. The single Flash block with 4-byte program granularity and the dual-cycle 32x32 hardware multiplier enable deterministic real-time performance for sensor processing, motor control loops, and human-machine interface tasks. Typical applications include wearable fitness bands, low-cost consumer USB peripherals (HID, CDC, MIDI), portable medical sensors, IoT edge nodes, and battery-powered industrial sensors. The integrated USB 2.0 OTG controller is particularly useful for low-cost tether-to-PC designs that need bus-powered operation. When designing with this part, prioritize supply decoupling (0.1 uF + bulk) on all VDD pins, route the USB DP/DM traces as a 90-ohm differential pair with the on-chip series resistor enabled, and use the low-leakage pin wake-up units (LLWU) for ultra-low-power wake-from-Stop designs. This page synthesizes distributor pricing, parametric comparison, and drop-in alternatives across the Kinetis L family and competing Cortex-M0+ MCUs - information not aggregated in any single manufacturer datasheet.

RFQ Contact
MKL15Z32VFM4 - 48MHz Cortex-M0+ MCU, 32KB Flash | NXP
MKL15Z32VFM4

MKL15Z32VFM4 - 48MHz Cortex-M0+ MCU, 32KB Flash | NXP

The NXP Semiconductors MKL15Z32VFM4 is a compact 32-bit ARM Cortex-M0+ microcontroller with a 48 MHz clock, 32 KB flash memory and 4 KB SRAM, packaged in a 32-lead HVQFN package measuring 5 mm by 5 mm. It is designed for low-power embedded systems requiring efficient code execution in a small surface-mount footprint. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, volatile data memory, peripherals and communication interfaces on one integrated circuit. Within the product hierarchy, the MKL15Z32VFM4 is an ARM Cortex-M0+ microcontroller, a 32-bit embedded processor, an integrated circuit and a semiconductor. Its combination of Cortex-M0+ code efficiency, modest memory capacity and a 5 mm square package suits compact control, sensing and interface products. The principal device parameters are a 48 MHz operating frequency, 32 KB of flash for firmware and 4 KB of SRAM for working memory. The device belongs to the Kinetis KL1 family and is identified as the KL15 sub-family by its ordering code. Its 32-pin HVQFN package supports compact board layouts, while its low-power design focus targets battery-operated and intermittently powered products that need an economical embedded-control solution. The MKL15Z32VFM4 uses an ARM Cortex-M0+ processor core operating as a 32-bit architecture. Cortex-M0+ designs prioritize energy efficiency and a compact instruction set, making them useful for control tasks that do not require the processing capability of a higher-performance Cortex-M core. The 32 KB flash provides space for application code, configuration data and boot routines, while 4 KB of SRAM accommodates working variables, stacks and peripheral data structures. Typical uses include low-power sensor nodes, compact industrial controls, wearable accessories, appliance interfaces and embedded measurement modules. The small HVQFN footprint can simplify placement where board area is constrained. Developers can evaluate the device with standard embedded-development practices for ARM Cortex-M processors, including an appropriate C/C++ toolchain, debugger, linker configuration, bootloader strategy and peripheral-driver support. PCB design should preserve the manufacturer's recommended power, decoupling, clock and exposed-pad requirements. A compact package does not remove the need for careful thermal planning: sustained processor activity and nearby power conversion can heat the device and its exposed thermal pad. Firmware should also include watchdog and brownout strategies when the MCU controls safety-relevant or unattended equipment. Confirm pin multiplexing and peripheral availability against the manufacturer pin table before finalizing the PCB. This product page combines the manufacturer's core device characteristics, a practical low-power application context, engineering design considerations and same-package replacement guidance. It is intended to help designers evaluate the MKL15Z32VFM4 for an embedded-control design while keeping package compatibility, firmware support, memory requirements and production sourcing in the same decision process.

RFQ Contact
MKL15Z32VFT4 - 48MHz Cortex-M0+ 32KB Flash MCU | NXP
MKL15Z32VFT4

MKL15Z32VFT4 - 48MHz Cortex-M0+ 32KB Flash MCU | NXP

The NXP MKL15Z32VFT4 is an ARM Cortex-M0+ based ultra-low-power microcontroller from the Kinetis KL1x family, featuring 32KB flash, 4KB SRAM, and a 48 MHz core clock, housed in a 48-pin QFN (7x7 mm) package with exposed pad. What is a Kinetis KL1x microcontroller? The Kinetis KL1x is NXP's general-purpose ultra-low-power MCU family that builds on the KL0x family by adding more memory, communication peripherals, and analog options. The MKL15Z32VFT4 sits in this hierarchy as: microcontroller -> 32-bit MCU -> ARM Cortex-M0+ MCU -> Kinetis family -> KL1x sub-family -> KL15 sub-sub-family. The Cortex-M0+ core itself is the smallest, most energy-efficient ARM core, designed for cost-sensitive embedded applications where deterministic low power matters more than raw performance. Key features include an operating voltage range of 1.71V to 3.6V, an industrial temperature range of -40C to +105C, a 12-bit ADC, multiple serial interfaces, low-power operating modes with sub-uA sleep currents, and an integrated 32KB flash memory array. The device also integrates a 16-bit SAR ADC, comparators, and a flexible low-power timer, making it suitable for battery-powered sensor products. Architecturally, the MKL15Z32VFT4 leverages the Cortex-M0+ core's two-stage pipeline and single-cycle I/O access, paired with NXP's low-leakage process technology and an integrated voltage regulator. The 48 MHz core clock delivers 0.93 DMIPS/MHz and supports both Thumb and Thumb-2 instruction subsets. The chip integrates up to 40 GPIO, multiple DMA channels, and a peripheral crossbar for flexible signal routing. Typical applications include wearable health monitors, battery-powered IoT sensor nodes, low-end consumer electronics, and industrial control nodes where energy harvesting or coin-cell operation is desired. The exposed thermal pad on the QFN package improves dissipation for sustained 48 MHz operation. When designing with this part, pay attention to the exposed pad (EP) connection to the ground plane for thermal and electrical performance. Use NXP's Kinetis Design Studio or MCUXpresso toolchain for firmware development, and ensure the brown-out and low-voltage detect settings match the battery chemistry profile. This page synthesizes distributor pricing, drop-in alternatives from the same Kinetis family, and practical design notes not found in the manufacturer datasheet alone.

RFQ Contact
MKL15Z32VLK4 - 48MHz Cortex-M0+ 32KB MCU | NXP
MKL15Z32VLK4

MKL15Z32VLK4 - 48MHz Cortex-M0+ 32KB MCU | NXP

The NXP Semiconductors MKL15Z32VLK4 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller operating at up to 48 MHz, with 32 KB of flash memory, 4 KB of SRAM, and an 80-pin LQFP package measuring 12 mm by 12 mm. It also includes a USB device controller and flexible clock options for energy-efficient embedded designs. A microcontroller is a programmable system-on-chip that combines a processor core, nonvolatile program memory, volatile data memory, and peripherals in one package. The MKL15Z32VLK4 belongs to the Kinetis KL1x family, which is positioned for low-power embedded control. Its hierarchy extends from Arm Cortex-M0+ microcontroller to 32-bit microcontroller, embedded processor, and mixed-signal semiconductor. Key features include a 48 MHz Arm Cortex-M0+ core, 32 KB flash for firmware, and 4 KB SRAM for working data. The integrated USB device controller supports designs that need a USB peripheral interface, while flexible clock options give designers more control over timing and power-management configurations. The 80-LQFP package provides enough pins for mixed-signal, communication, and general-purpose control interfaces. The device architecture centers on the low-power Cortex-M0+ core, which is designed for cost-sensitive and energy-efficient embedded applications. Flash memory provides a stable location for application code and configuration data, while SRAM accommodates working variables, stack usage, and peripheral data. The USB device controller adds a useful connectivity block without requiring a separate USB interface IC on designs that use the supported USB device function. Typical uses include USB-connected data loggers, compact industrial controllers, low-power sensor nodes, wearable or portable accessories, and embedded human-interface systems. The combination of 32 KB flash and 4 KB SRAM is suitable for small control loops, communication firmware, and moderate protocol stacks. Designs requiring larger code images or denser storage should evaluate higher-memory members of the Kinetis KL family. PCB implementation should preserve the exposed-pad and decoupling requirements stated in the manufacturer datasheet. Place the bulk and high-frequency bypass capacitors close to the supply pins, route sensitive analog and communication signals away from fast-switching nodes, and confirm all 80 pin assignments before releasing the layout. Firmware selection should use the device configuration and pin-muxing tables for the exact ordering code. This page combines the verified device identity, package characteristics, memory configuration, clock and USB features, compatible same-family options, and practical design guidance into one engineering reference. It also distinguishes the LQFP target from lower-pin-count members that may use similar ordering codes but require a different PCB footprint.

RFQ Contact
MKL15Z64VFM4 - 48MHz Cortex-M0+ 64KB MCU | NXP
MKL15Z64VFM4

MKL15Z64VFM4 - 48MHz Cortex-M0+ 64KB MCU | NXP

The NXP Semiconductors MKL15Z64VFM4 is a general-purpose 32-bit Arm Cortex-M0+ Kinetis KL1 microcontroller operating at 48 MHz, with 64 KB of flash memory and 8 KB of SRAM in a 32-HVQFN 5 x 5 mm package. It combines an ultra-low-power MCU architecture with integrated analog, communication, timer, and GPIO resources for compact embedded systems. A microcontroller is a semiconductor device that integrates a processor core, memory, and peripherals onto one package. The MKL15Z64VFM4 belongs to the Kinetis KL1 family hierarchy of Cortex-M0+ microcontrollers, within the broader embedded processor and semiconductor categories. Its general-purpose design is intended for battery-powered appliances, industrial modules, portable equipment, and connected control products where compactness, energy efficiency, and deterministic peripheral access are important. Three headline features define this device: a 48 MHz Cortex-M0+ processing core, 64 KB of program flash, and a 32-HVQFN 5 x 5 mm surface-mount package. The 8 KB SRAM provides working memory for protocols, control state, and application tasks. A 3.3 V operating supply is identified for the device, while the exact low-power operating modes, analog performance, and current-consumption limits should be confirmed in the NXP datasheet before a power-budget sign-off. The Arm Cortex-M0+ architecture supports compact code while retaining the interrupt-driven, deterministic behavior required by embedded control systems. Integrated peripherals make it possible to reduce the number of external components in sensing, communications, timer-based control, and general digital I/O designs. The 5 x 5 mm HVQFN footprint also preserves access to a thermal or exposed pad and supports dense PCB layouts, but its fine pitch demands careful assembly planning. Typical applications include energy-efficient sensor nodes, industrial monitoring modules, small motor-control boards, battery-powered accessories, and connected home products. In these systems, the MCU can execute control logic, supervise inputs, service communication peripherals, and schedule tasks without requiring a separate processor. The 48 MHz clock provides additional compute margin over slower general-purpose microcontroller families while retaining the low-power orientation of the Kinetis KL1 series. Designers should place decoupling capacitors close to the supply pins, route the exposed-pad area according to the land-pattern guidance, and verify signal-level limits before attaching external sensors or communications modules. Firmware development must use the supported Arm Cortex-M toolchain, programming interface, clock configuration, and peripheral initialization sequence described by NXP. This page combines the exact device identity, core and memory characteristics, package information, migration-oriented alternatives, and practical implementation guidance. It helps engineers distinguish the MKL15Z64VFM4 from other Kinetis devices while identifying when a pin-compatible KL-family change can simplify sourcing without altering the PCB footprint.

RFQ Contact
MKL15Z64VFT4 - 48MHz Cortex-M0+ MCU, 64KB Flash | NXP
MKL15Z64VFT4

MKL15Z64VFT4 - 48MHz Cortex-M0+ MCU, 64KB Flash | NXP

The NXP Semiconductors MKL15Z64VFT4 is an ARM Cortex-M0+ based ultra-low-power microcontroller from the Kinetis KL1x sub-family, offering 48 MHz CPU performance with 64 KB of embedded Flash and 8 KB of SRAM in a 48-pin QFN (7x7 mm) package. According to NXP product information, this MCU integrates connectivity peripherals including I2C, LINbus, SPI, UART/USART, and a Touch Sensing Interface (TSI), along with on-chip analog and timing peripherals for embedded designs. What is a Kinetis KL1x microcontroller? The Kinetis KL1x family is a general-purpose ultra-low-power 32-bit MCU line from NXP based on the ARM Cortex-M0+ core, succeeding the original Kinetis KL0x family with additional memory, communications, and analog peripheral options. Within the hierarchy, KL1x sits beneath Kinetis K-series Cortex-M4 parts (K10/K20/K40/K60) and above KL0x in NXP's ultra-low-power portfolio, providing a migration path to higher performance while preserving the same peripheral IP and toolchain. Key technical features include Brown-out Detect/Reset, Low-Voltage Detect (LVD), Power-On Reset (POR), Direct Memory Access (DMA), a Watchdog Timer (WDT), and PWM channels suitable for motor control or LED driving. The device runs from a single 3.3 V supply and supports a wide operating temperature range suitable for industrial applications. The integrated TSI block enables capacitive touch user interfaces without external touch controllers. Architecture-wise, the KL1x uses the efficient ARM Cortex-M0+ core with single-cycle I/O access, Thumb-2 instruction set, and a deterministic interrupt controller. The 64 KB Flash program memory is split into a primary block plus a separate FlexMemory or EEPROM emulation region depending on configuration, while the 8 KB SRAM provides ample space for protocol stacks and application state. Typical applications include ultra-low-power industrial sensor nodes, capacitive touch user interfaces, home appliances with LIN-bus connectivity, low-end consumer electronics, and battery-powered IoT edge devices. The combination of low-power modes, multiple serial interfaces, and TSI makes the KL1x well-suited to mains-powered and battery-powered products alike. When designing with this part, ensure the PCB footprint matches the 48-QFN (7x7) land pattern with proper thermal via arrangement under the exposed pad. The NXP Kinetis SDK and Processor Expert tooling provide firmware drivers; pin multiplexing must be configured via the PORT and SIM modules before peripheral activation. Selected power modes such as VLLS0/VLLS1 should be evaluated carefully against wakeup source requirements. This page consolidates distributor pricing, package-equivalent KL1x alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ Contact
MKL15Z64VLK4 - 48MHz Cortex-M0+ 64KB MCU | NXP
MKL15Z64VLK4

MKL15Z64VLK4 - 48MHz Cortex-M0+ 64KB MCU | NXP

The NXP Semiconductors MKL15Z64VLK4 is an ultra-low-power Kinetis KL1 microcontroller with an ARM Cortex-M0+ core, 48 MHz operating frequency, and 64 KB of Flash memory in an 80-pin LQFP package measuring 12 x 12 mm. It is designed for compact embedded systems requiring real-time control, USB connectivity, and integrated peripherals. The device operates from a 1.8 V to 3.3 V supply range and is identified as an industrial-temperature, AEC-Q100-capable option in catalog listings. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one package. The MKL15Z64VLK4 belongs to the Cortex-M0+ -> 32-bit RISC microcontroller -> embedded processor -> semiconductor hierarchy. Its compact 80-LQFP construction gives embedded designers access to general-purpose I/O and communication functions without requiring a separate external USB transceiver. The principal performance characteristics are a 48 MHz ARM Cortex-M0+ processor, 64 KB of Flash storage, and operation from 1.8 V, 2.5 V, or 3.3 V. NXP describes the part as an ultra-low-power device with USB connectivity and integrated peripherals for real-time embedded applications. These characteristics make it useful where deterministic control, modest program storage, and USB device support are required within a relatively small PCB footprint. The 80-LQFP package provides 80 terminal positions and a 12 x 12 mm body size. Its pin count offers more interface access than smaller microcontroller packages, which can reduce the need for external I/O expanders. The Gull Wing terminal form and square package shape also support conventional PCB assembly processes, although the exposed thermal behavior and routing density require careful layout review. Typical applications include USB-connected data acquisition, compact industrial controls, USB-to-serial or USB-to-GPIO accessories, sensor-interface nodes, and low-power embedded instrumentation. The 64 KB Flash capacity is suitable for compact control firmware, while the integrated USB interface can simplify host connectivity when the product requires enumeration, data transfer, or configuration over USB. Designers should confirm the complete pin assignment, alternate-function multiplexing, and power requirements from the NXP datasheet before layout. The device's multi-voltage capability does not remove the need for careful rail sequencing and decoupling, and USB signal routing should use controlled-impedance routing. Firmware development should also account for the limited 64 KB program-storage budget when application code, USB descriptors, and real-time control routines are combined. This product record combines the exact catalog identity, package and performance details, traceable manufacturer and distributor references, practical integration guidance, and strictly filtered drop-in alternatives. It is intended to help engineers evaluate PCB reuse, firmware constraints, power architecture, and connector requirements before committing MKL15Z64VLK4 to a new embedded design.

RFQ Contact
MKL16Z128VLH4 - 48MHz Cortex-M0+ MCU 128KB Flash LQFP-64 | NXP
MKL16Z128VLH4

MKL16Z128VLH4 - 48MHz Cortex-M0+ MCU 128KB Flash LQFP-64 | NXP

The NXP Semiconductors MKL16Z128VLH4 is a Kinetis KL16 ultra-low-power microcontroller featuring an ARM Cortex-M0+ core running at up to 48 MHz, with 128 KB of on-chip Flash and 16 KB of SRAM, housed in a 64-pin LQFP (10x10 mm) package. It integrates a full-speed USB 2.0 device controller, 12-bit ADC, low-power timer (LPTMR), real-time clock (RTC), and multiple serial interfaces including UART, SPI, and I²C. An MCU (microcontroller unit) is a single-chip computer that integrates a processor core, memory, and programmable peripherals, sitting at the top of the embedded computing hierarchy: microcontroller -> microprocessor -> semiconductor. The Kinetis KL1x sub-family extends the KL0x with additional memory and connectivity, and the KL16 variant adds USB while maintaining the ultra-low-power modes that make Kinetis parts popular for battery-powered designs. Key features include 48 MHz maximum CPU frequency, 128 KB program Flash, 16 KB SRAM, USB 2.0 Full-Speed device with on-chip transceiver, 12-bit SAR ADC with up to 16 channels, multiple low-power modes (Wait, Stop, VLPR, VLPS), and a low-power timer that can run in all power modes. The 64-LQFP footprint (10x10 mm) provides ample GPIO for typical embedded applications. The KL16 architecture pairs an ARM Cortex-M0+ core (single-cycle 32-bit multiply, Harvard bus, NVIC with 32 interrupts) with NXP's ultra-low-power design techniques, including multiple clock gating domains and fast wake-up from low-power states. On-chip peripherals are mapped through an AIPS-Lite bus structure that simplifies DMA and interrupt routing for deterministic real-time behavior. Typical applications include wearable health and fitness devices, USB peripherals (HID, CDC, custom classes), home automation sensors, smart metering endpoints, and portable consumer electronics. The integrated USB 2.0 FS device eliminates the need for an external transceiver, reducing BOM cost in USB HID, CDC, or vendor-class device designs. When designing with this part, choose the correct Flash size variant in the family (KL16: 64KB/128KB/256KB) to match your code footprint. Take advantage of the multiple low-power modes for battery operation, but verify that any peripheral used in VLPS/VLPR is in the chip-specific low-power compatibility list. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers and procurement teams evaluate the MKL16Z128VLH4 for new designs and second-source decisions.

RFQ Contact
MKL16Z256VLH4 - 48MHz Cortex-M0+ 256KB Flash MCU | NXP
MKL16Z256VLH4

MKL16Z256VLH4 - 48MHz Cortex-M0+ 256KB Flash MCU | NXP

The NXP Semiconductors MKL16Z256VLH4 is a 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KL1 family, running at up to 48 MHz with 256KB (256K x 8) on-chip flash memory, housed in a 64-pin LQFP (10x10 mm) surface-mount package. A microcontroller (MCU) is a single-chip embedded computer that integrates a processor core, program memory, data memory, and peripherals on one die, serving as the compute element at the heart of embedded systems within the broader power-and-control hierarchy of modern electronics. The Kinetis KL series belongs to the class of ultra-low-power 32-bit MCUs built on the energy-efficient ARM Cortex-M0+ architecture. Key features of the MKL16Z256VLH4 include the FlexUSB module for USB device connectivity, an integrated segment LCD controller for direct glass drive, and the exceptional energy efficiency that defines the Kinetis L family, combining the ease of use of the Cortex-M0+ core with rich peripheral integration. Architecturally, the device pairs the two-stage Cortex-M0+ pipeline with NXP Kinetis peripheral sets, enabling scalable designs that can migrate across the Kinetis 32-bit portfolio while preserving software enablement. The 256KB flash provides ample room for protocol stacks such as USB HID/CDC classes and UI code driving the segment LCD. Typical applications include battery-powered human-machine interfaces with LCD displays, USB-connected sensor endpoints, consumer appliance panels, and industrial low-power monitoring nodes where energy efficiency and display capability matter. For design, plan USB and LCD pin assignments early, since the FlexUSB and segment LCD controller share the finite I/O pool of the 64-LQFP package. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Contact
MKL16Z32VFM4 - 48MHz Cortex-M0+ MCU | NXP Semiconductors
MKL16Z32VFM4

MKL16Z32VFM4 - 48MHz Cortex-M0+ MCU | NXP Semiconductors

NXP Semiconductors MKL16Z32VFM4 is a 32-bit Arm Cortex-M0+ Kinetis KL1 microcontroller with a 48 MHz maximum clock, 32 KB of flash memory, 4 KB of SRAM, and a single processing core, housed in a 32-HVQFN package measuring 5 mm by 5 mm. It belongs to the Kinetis KL16 ultra-low-power MCU family and is intended for compact embedded systems requiring efficient processing, analog measurement, communication, and low-power operation. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces into one device. The MKL16Z32VFM4 sits within the hierarchy of embedded processor, microcontroller, 32-bit MCU, Arm Cortex-M0+ MCU, and Kinetis KL1 MCU. Its combination of 48 MHz processing performance and 32 KB flash makes it suitable for moderate control workloads without requiring a larger system-on-chip or external memory. The primary features include an Arm Cortex-M0+ core operating up to 48 MHz, 32 KB of flash, 4 KB of SRAM, and a 5 mm by 5 mm 32-HVQFN package. The low-power orientation of the Kinetis KL1 family supports battery-operated and intermittently powered products. Its compact package also reduces board area, although designers must account for the exposed thermal pad and the fine-pitch land pattern when laying out the PCB. The MCU architecture combines the Cortex-M0+ instruction set with integrated serial interfaces, timers, and analog functions suited to embedded control. The 32 KB flash provides a constrained but practical code and configuration budget, while 4 KB of SRAM supports stack, data, and peripheral buffering. Firmware development should therefore use the NXP Kinetis KL1 reference manual, device pin data, and the applicable development toolchain rather than assuming resources from a larger Kinetis member. Typical uses include low-power sensor nodes, compact industrial controls, consumer accessories, battery-powered instruments, and small motor or actuator-control systems. The MCU can also serve as a system controller in designs that combine external sensors, communication transceivers, indicators, and local data acquisition. Peripheral assignments and signal limits must be checked against the device pin table before schematic capture. For layout, place decoupling capacitors close to the supply pins and provide a continuous ground return beneath the exposed pad. Route high-speed or sensitive analog signals away from switching nodes and programming-interface traces. Firmware configuration, clock selection, low-power modes, and peripheral initialization should follow the NXP reference manual and device errata. This product page combines the manufacturer specifications with practical guidance for package selection, firmware constraints, application fit, and drop-in replacement evaluation. It also provides structured comparisons for nearby Kinetis KL parts, helping engineers distinguish memory changes from functional compatibility before approving a substitution.

RFQ Contact
MKL16Z32VFT4 - 48MHz Cortex-M0+ MCU 32KB Flash | NXP
MKL16Z32VFT4

MKL16Z32VFT4 - 48MHz Cortex-M0+ MCU 32KB Flash | NXP

The NXP Semiconductors MKL16Z32VFT4 is a Kinetis KL16 series 32-bit microcontroller built on an Arm Cortex-M0+ core running at up to 48 MHz, integrating 32 KB of flash memory and 4 KB of SRAM in a 48-pin QFN (7x7 mm) package with exposed pad. It operates from a 1.8V, 2.5V, or 3.3V supply per distributor listings from Arrow and DigiKey. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the lowest layer of the embedded-system hierarchy: MCU family (Kinetis KL1x) -> general-purpose MCU -> embedded processor -> semiconductor device. The KL1x family extends the ultra-low-power KL0x family with additional memory, communication, and analog peripheral options. Key features include the Cortex-M0+ core, the most energy-efficient Arm processor profile, delivering 48 MHz performance at very low dynamic current; 32 KB on-chip flash for program storage and 4 KB SRAM for data; and a rich peripheral set typical of the KL16 sub-family, including serial communication interfaces (UART, SPI, I2C), a 12-bit ADC, timers, and GPIO, plus low-power modes suited to battery-operated products. Technically, the Kinetis KL16 sub-family shares the same platform architecture as other Kinetis MCUs, with a crossbar bus, peripheral clock gating, and bitband-style GPIO control. The exposed-pad QFN package improves thermal and electrical performance versus a standard QFN, and the 7x7 mm footprint with 0.5 mm pitch suits compact two- and four-layer PCBs. Typical applications include portable and battery-powered consumer devices, sensor nodes and IoT end points, human-interface and touch sensing products, and small industrial control boards where ultra-low power and a small footprint matter more than raw processing throughput. A key design consideration is memory headroom: at 32 KB flash and 4 KB SRAM, code size and stack usage should be budgeted early, and the pin-compatible larger-memory siblings in the same package can be used as upgrade paths. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Contact
MKL16Z32VLH4 - 48MHz Cortex-M0+ 32KB MCU | NXP
MKL16Z32VLH4

MKL16Z32VLH4 - 48MHz Cortex-M0+ 32KB MCU | NXP

NXP MKL16Z32VLH4 is a 32-bit Arm Cortex-M0+ microcontroller operating up to 48 MHz, with 32 KB of Flash memory, 4 KB of SRAM, and a 64-LQFP 10 x 10 mm package. The device belongs to the Kinetis KL1 general-purpose, ultra-low-power MCU family and combines a compact footprint with mixed-signal and communication peripherals. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripheral interfaces onto one device. The Kinetis KL1 hierarchy extends from the Cortex-M0+ MCU to embedded microcontroller, embedded processor, and semiconductor categories. MKL16Z32VLH4 is intended for compact embedded systems where low energy use, deterministic control, analog measurement, and flexible serial connectivity are more important than maximum processing performance or large program storage. Key features include a 48 MHz Arm Cortex-M0+ core, 32 KB of Flash program memory, 4 KB of SRAM, and a 1.71 V to 3.6 V operating supply range. The product listing identifies 16-bit analog-to-digital conversion and 12-bit digital-to-analog conversion capabilities, while its ultra-low-power positioning makes it suitable for battery-operated and always-on embedded products. The 64-LQFP package also provides enough pins for external interfaces and mixed-signal circuitry. The MKL16Z32VLH4 architecture combines a simple Cortex-M0+ instruction set with integrated communication, timing, analog, and GPIO resources. Its 32 KB Flash capacity supports embedded firmware, configuration data, and application state, while 4 KB of SRAM handles working memory. Operation across a 1.71 V to 3.6 V supply range permits integration with low-voltage 3.3 V systems and compatible power-management designs. Typical uses include industrial sensor nodes, building-control endpoints, battery-powered monitors, compact motor-control modules, and low-cost communication appliances. Its small 10 x 10 mm LQFP footprint simplifies assembly when a leaded package is preferred over a fine-pitch or no-lead alternative. The integrated ADC and DAC also reduce the need for external conversion components in measurement and signal-conditioning designs. PCB design should preserve a stable supply rail, route sensitive analog inputs away from fast digital switching paths, and follow the NXP pin-description table when assigning external signals. Because the 64-pin package exposes many peripheral options, unused pins should be configured according to the manufacturer guidance rather than left without a defined electrical state. This page combines technical specifications, drop-in replacement guidance, application-focused design notes, and parameter comparisons to help engineers evaluate the MKL16Z32VLH4 before integrating it into an embedded control platform.

RFQ Contact