Products (22,000+)

PIC18F24K20T-I/SO - 8-bit 64MHz 16KB Flash MCU | Microchip
PIC18F24K20T-I/SO

PIC18F24K20T-I/SO - 8-bit 64MHz 16KB Flash MCU | Microchip

The Microchip Technology PIC18F24K20T-I/SO is an 8-bit PIC18 XLP flash microcontroller delivering up to 64 MHz CPU performance (16 MIPS) with 16 KB of program Flash, 768 bytes of RAM, and 256 bytes of EEPROM, packaged in a 28-pin SOIC (SO) for tape-and-reel industrial -40C to +85C deployments. Its headline metrics are 16 KB on-chip Flash program memory, 64 MHz maximum CPU clock with 16 MIPS throughput, and a nanoWatt XLP extreme-low-power sleep current that supports multi-year battery life on coin cells. An 8-bit flash microcontroller is a single-chip computer built around an 8-bit data path, on-chip non-volatile program memory (Flash), SRAM for variables, and a rich set of peripherals including timers, ADC, communication ports, and GPIO. The PIC18 architecture is the high-performance family within Microchip's PIC line, providing an enhanced instruction set, C-compiler-friendly orthogonal design, and linear addressing up to 2 MB. The PIC18F24K20 belongs to the PIC18F2XK20/4XK20 family that adds nanoWatt XLP technology and 10-bit ADC for low-power embedded designs. Key differentiating features include 25 digital I/O pins, 14 channels of 10-bit ADC, two analog comparators, two CCP modules, one Enhanced USART, one MSSP (SPI/I2C), 1024 bytes of data EEPROM, and self-programming Flash with block erase. The 'T' suffix in the MPN indicates tape-and-reel packaging, and 'I' specifies the industrial temperature grade, while /SO denotes the 28-pin SOIC footprint. Technical depth: the PIC18F24K20 implements Microchip's nanoWatt XLP technology, which delivers standby currents below 100 nA typical and sleep currents as low as 20 nA in the deepest low-power modes. The internal 16 MHz oscillator with 4x PLL provides a 64 MHz system clock, and the architecture allows dynamic clock switching between the primary oscillator, secondary 31 kHz LP oscillator, and the internal oscillator for power optimization. The 10-bit ADC with up to 14 channels supports both single-ended and differential conversions at 100 ksps. Typical applications include battery-powered sensor nodes, low-energy wireless remotes (sub-GHz or BLE host MCUs), home appliances and white goods, industrial control modules, automotive body electronics (non-safety), and USB device controllers via the MSSP/USART peripherals. The combination of 16 KB Flash and XLP sleep currents allows year-long operation on two AA cells in typical 1% duty-cycle applications. When designing with this part, allocate at least 1 uF Vdd bulk decoupling and a 100 nF ceramic bypass placed within 5 mm of the IC pins. The MCLR pin must use the recommended 10 kohm pull-up to Vdd. The SOIC-28 footprint is industry-standard and socket-compatible with most PIC18F2XK20/4XK20 family variants, allowing easy migration to larger memory parts like PIC18F25K20 or PIC18F26K20 without PCB rework. This page synthesizes distributor pricing, drop-in alternatives from Microchip's PIC18 family, and practical design notes that complement the manufacturer datasheet and help engineers make faster pin-compatible sourcing decisions.

RFQ Contact
PIC18F24K20T-I/SS - 64MHz 8-bit 16KB Flash MCU | Microchip
PIC18F24K20T-I/SS

PIC18F24K20T-I/SS - 64MHz 8-bit 16KB Flash MCU | Microchip

The Microchip Technology PIC18F24K20T-I/SS is an 8-bit PIC18 XLP family microcontroller delivering 16 MIPS performance at 64 MHz from a 16 KB Flash / 768 B RAM / 256 B EEPROM memory array in a 28-pin SSOP package. The "T" suffix denotes Tape & Reel packaging and the "I" suffix indicates the industrial -40C to +85C operating range, making it suitable for commercial and industrial embedded designs. An 8-bit PIC18 microcontroller is a Harvard-architecture CMOS RISC device that combines a compact instruction set with rich peripheral integration for low-power embedded control. The PIC18F2XK20/4XK20 family adds nanoWatt XLP technology - a suite of sleep, idle, and clock-gating modes that allow active currents in the microamp range and sleep currents well below 1 uA, ideal for battery-powered or energy-harvesting products that must run for years on a single cell. Key features include 25 digital I/O pins, a 10-bit ADC with up to 11 channels, multiple Enhanced USART, MSSP (SPI/I2C) ports, two analog comparators, a hardware ECCP plus two CCP modules, and two 8-bit timers paired with three 16-bit timers. Internal oscillator options from 8 MHz to 31 kHz plus PLL multiplication remove the need for an external crystal in cost-sensitive designs while preserving accurate USB-friendly timing through HF-INTOSC with 4x PLL. Typical applications include battery-powered sensor nodes, IoT edge devices, low-energy wireless protocol stacks, portable consumer electronics, motor and fan control loops, and automotive interior subsystems. The combination of XLP, 64 MHz core, and dual capture/compare timers lets firmware implement PID control or PWM dimming without an external DSP. When designing with this device, plan I/O bank grouping around the analog and digital supply pins (AVDD/AVSS/VDD/VSS) and reserve the PGM/LVP pin (RB5/PGM) so ICSP programming is not blocked. Choose the SSOP variant (PIC18F24K20T-I/SS) when board height is constrained; otherwise the 28-pin SOIC option (PIC18F24K20T-I/SO) is preferred for hand-soldering or through-hole rework, and the same die is available in QFN (ML) for tighter layouts. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ Contact
PIC18F24K22-E/MV - 16KB Flash 8-bit MCU 48MHz UQFN-28 | Microchip
PIC18F24K22-E/MV

PIC18F24K22-E/MV - 16KB Flash 8-bit MCU 48MHz UQFN-28 | Microchip

The Microchip Technology PIC18F24K22-E/MV is an 8-bit PIC18 XLP microcontroller featuring 16KB Flash program memory, 768 bytes SRAM, and 256 bytes EEPROM, operating up to 48MHz in a 28-pin UQFN (4x4 mm) package. It includes 25 I/O pins, 17 channels of 10-bit ADC, a 5-bit DAC, and supports an extended supply voltage range of 2.3V to 5.5V for low-power and high-performance operation. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O into one device. PIC microcontrollers, built on a RISC-based Harvard architecture, are widely used in embedded control for their deterministic instruction timing, low power consumption, and rich peripheral integration. The PIC18 family occupies the upper end of Microchip's 8-bit portfolio, balancing performance (up to 16 MIPS at 64MHz) with extensive analog and digital peripherals. nanoWatt XLP technology extends sleep-mode current down to the nanoampere range, making these MCUs suitable for battery-powered and energy-harvesting applications. Key features of the PIC18F24K22 family include up to 48MHz operation (16 MIPS core throughput), 64-level hardware stack, 25 digital I/O with individual pull-up configuration, 17 channels of 10-bit ADC with internal voltage reference, a 5-bit DAC for bias generation, multiple Enhanced USART, SPI, and I2C peripherals, two analog comparators, and four timer modules. The 16KB self-programmable Flash supports in-application reprogramming, enabling field firmware updates without external programmer hardware. The PIC18F24K22 employs a 16-bit instruction word RISC core with 75 base instructions and 83 enhanced instructions. Its nanopower XLP peripherals include a Real-Time Clock/Calendar (RTCC) with on-chip timing elements, deep sleep modes drawing sub-microamp currents, and ultra-low-power wake sources. Internal oscillators up to 64MHz can be trimmed to within +/- 2 percent accuracy, eliminating external crystals in cost-sensitive designs. Typical applications include low-power wireless sensor nodes, portable medical devices, IoT edge nodes, battery-powered instrumentation, HVAC controls, automotive body electronics (via -Q1 suffix variants), and consumer appliances. The compact UQFN-28 4x4 mm package suits space-constrained PCB layouts where 25 GPIO is sufficient. Designers should evaluate the I/O count early; 25 pins is sufficient for most sensor-hub designs but limits designs that require multiple parallel buses. For applications requiring more I/O, consider PIC18F44K22 (40-pin) or PIC18F45K22 (44-pin) in the same K22 family. Always provide adequate decoupling on VDD/AVDD pairs (100nF ceramic minimum) to support ADC accuracy. This page synthesizes distributor pricing tiers, drop-in alternate ordering codes within the same K22 family, and practical design notes not found in the manufacturer datasheet alone.

RFQ Contact
PIC18F24K22-E/SO - 8-bit MCU, 16KB Flash, 48MHz, 28-SOIC | Microchip
PIC18F24K22-E/SO

PIC18F24K22-E/SO - 8-bit MCU, 16KB Flash, 48MHz, 28-SOIC | Microchip

The Microchip Technology PIC18F24K22-E/SO is an 8-bit PIC18 microcontroller built on a high-performance RISC core, integrating 16KB of Flash program memory (8K x 16), 768 bytes of SRAM, and 256 bytes of EEPROM, housed in a 28-pin SOIC (SO) wide-body package with 25 I/O pins and a 48MHz internal oscillator (16 MIPS instruction throughput). An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and peripherals on one die. PIC18 microcontrollers sit in the legacy 8-bit tier of Microchip's portfolio, sitting between the baseline PIC10/12/16 families and the 16-bit dsPIC/PIC24 line, and remain widely used in cost-sensitive, deterministic, low-power embedded designs. Key features include a 1.8V to 5.5V operating range (the PIC18F variant; PIC18LF parts extend down to 1.8V), nanoWatt XLP ultra-low-power technology that achieves sub-uA sleep currents, 12-bit ADC with up to 17 channels, two comparators, three ECCP modules, MSSP/SPI/I2C, two EUSART peripherals, CTMU for capacitive touch, and an 8-bit parallel port. The 28-SOIC wide-body package provides ample PCB real estate for hand-soldered prototypes and high-volume reflow. The architecture uses a 16-bit instruction word with an 8-bit data path, an 8x8 hardware multiplier, C compiler friendly memory model, and an enhanced instruction set with single-cycle 8x8 multiply and hardware stack that supports deeply nested calls. The PIC18F variant tolerates industrial 4.2V to 5.5V rails common in 5V automotive subsystems, factory sensor conditioning, and mains-powered white goods, while the internal oscillator eliminates external crystals in cost-sensitive layouts. Typical applications include industrial sensor conditioning, HVAC thermostat control, low-end home appliances, automotive body modules, USB HID peripherals, LED lighting controllers, and battery-powered metering. The XLP sleep currents below 1uA also suit long-life IoT sensor nodes powered by coin cells. When designing with this part, configure CONFIG bits to map the I/O correctly, choose between INTOSC and an external crystal based on USB timing accuracy, and budget Brown-Out Reset and Watchdog Timer for industrial reliability. Place a 100nF decoupling capacitor within 5mm of each VDD pin. This page synthesizes distributor pricing, drop-in alternatives, design notes, and FAQs that go beyond the manufacturer datasheet - giving engineers a single source for footprint, parametric, and sourcing decisions when adopting the PIC18F24K22-E/SO.

RFQ Contact
PIC18F24K22-E/SS - 8-bit 48MHz 16KB Flash MCU | Microchip
PIC18F24K22-E/SS

PIC18F24K22-E/SS - 8-bit 48MHz 16KB Flash MCU | Microchip

The Microchip Technology PIC18F24K22-E/SS is an 8-bit PIC18 XLP microcontroller featuring 48 MHz CPU speed, 16 KB (8K x 16) Flash program memory, and a 28-pin SSOP package designed for low-power, high-performance embedded applications. This automotive-grade ("-E" suffix) variant operates across 1.8 V to 5.5 V supply voltage with nanoWatt XLP extreme-low-power technology, making it ideal for battery-powered and energy-harvesting designs where quiescent current matters. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM and EEPROM), and programmable peripherals. PIC18 XLP microcontrollers belong to the 8-bit PIC18 family, which uses an enhanced Harvard RISC architecture with 16-bit instructions, 8-bit data path, and hardware multiplier. The "K22" device class adds higher-frequency operation, larger memory, and the nanoWatt XLP power-management extensions that enable sleep currents below 50 nA. Within the broader taxonomy: PIC18F24K22 -> PIC18 microcontroller -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. Key features include 16 KB Flash, 768 bytes RAM, 256 bytes EEPROM, 25 I/O pins, two Enhanced USART modules, two MSSP (SPI/I2C) ports, a 10-bit ADC with up to 17 channels, multiple 8-bit and 16-bit timers, and a PWM module with complementary outputs. The device provides 36 instructions, an 8x8 hardware multiplier, and an extended instruction set optimized for C compilers. On-chip debugging is supported via ICSP and ICD. The PIC18F24K22 family uses a 14-bit instruction word with 32-level hardware stack and interrupt-driven design. Internal oscillator blocks are factory-calibrated to ±1% across temperature, allowing designs without external crystals. Hardware peripherals are mapped through PPS (Peripheral Pin Select) for flexible routing, which simplifies PCB layout when migrating between PIC18F2XK22 and PIC18F4XK22 pinout variants. Typical applications include automotive body electronics, industrial sensor nodes, smart meters, home appliances, USB peripherals, LCD/LED display controllers, and battery-powered IoT endpoints. The combination of automotive temperature grade (-40 C to +125 C), low sleep current, and rich analog/digital peripherals makes it especially suitable for sensor hubs, motor control auxiliaries, and remote control transmitters. When designing with this MCU, ensure the ICSPDAT/ICSPCLK pins are accessible for in-circuit programming, and observe the Vcap pin requirement on the regulated core voltage. Brown-out reset should be enabled for automotive and industrial safety-critical applications. Configuration bits must be set before code execution to define oscillator mode and code protection. This page synthesizes distributor pricing, drop-in alternatives within the SSOP-28 footprint, and practical design notes not found in the manufacturer datasheet alone, supporting faster component selection and supply-chain decisions.

RFQ Contact
PIC18F24K22-I/ML - 8-Bit 64MHz XLP MCU 16KB Flash QFN-28 | Microchip
PIC18F24K22-I/ML

PIC18F24K22-I/ML - 8-Bit 64MHz XLP MCU 16KB Flash QFN-28 | Microchip

The Microchip PIC18F24K22-I/ML is a high-performance 8-bit PIC18 CMOS flash microcontroller with 16 KB of program memory, 768 bytes of SRAM, and 256 bytes of EEPROM, delivering up to 16 MIPS at 64 MHz in a 28-pin QFN (6x6 mm) package with exposed pad. The part operates from 2.5V to 5.5V and integrates the nanoWatt XLP extreme-low-power technology platform that drives Sleep currents below 100 nA typical, making it a strong fit for battery- and energy-harvesting applications. According to the manufacturer datasheet, the device executes instructions in 200 ns and supports C-compiler-friendly C99 operation through Microchip's MPLAB XC8 toolchain. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory, RAM, peripherals and I/O, designed for embedded control tasks. Within the Microchip portfolio, PIC18 sits between the baseline PIC10/12/16 and the high-performance PIC24/dsPIC33 families - richer peripherals and more memory than PIC16, lower cost and simpler toolchain than dsPIC33, all under one unified MPLAB X IDE. The PIC18FxxK22 family adds the nanoWatt XLP power-management layer, making it the preferred sub-family for low-power designs that still need USB, mTouch capacitive sensing, or 12-bit ADC performance. Key features include a 12-bit ADC with up to 19 channels, two rail-to-rail analog comparators with programmable on-chip voltage reference, mTouch capacitive touch sensing support, two enhanced USART modules, two I2C and two SPI peripherals, two 8-bit timers plus three 16-bit timers, and a Programmable High/Low Voltage Detect (PLVD) module. The 28-QFN package's central exposed pad (EP) ties to ground and provides a low-thermal-resistance path; the package is footprint-compatible with most PIC18F2XK22 28-pin variants, simplifying PCB reuse across the family. Typical applications include low-power IoT sensor nodes, consumer remote controls, home appliances with capacitive touch, battery-powered HVAC sensors, automotive body modules (AEC-Q100 grade 1 variant), and industrial control panels where the 64 MHz core and 16 MIPS headroom outpace PIC16 alternatives without paying the dsPIC33 price. When designing with this part, observe the 2.5-5.5V supply window and use the internal 16 MHz HFINTOSC to reduce external components; for sleep-sensitive designs, prefer the `nanoWatt XLP` deep-sleep modes (Sleep current under 100 nA typical) and enable the RTCC with a 32 kHz crystal for timekeeping.

RFQ Contact
PIC18F24K22-I/MV - 16KB Flash 8-bit MCU, 28-Pin UQFN | Microchip
PIC18F24K22-I/MV

PIC18F24K22-I/MV - 16KB Flash 8-bit MCU, 28-Pin UQFN | Microchip

The Microchip Technology PIC18F24K22-I/MV is an 8-bit PIC18 RISC microcontroller with 16KB of Flash program memory, 768 bytes of SRAM, and 256 bytes of EEPROM, housed in a 28-pin UQFN EP (4x4 mm) package with exposed thermal pad. It operates at up to 40 MHz (64 MHz with PLL) from a 2.5V/3.3V/5V supply range and carries AEC-Q100 automotive-grade qualification. According to the Microchip PIC18(L)F2X/4XK22 datasheet, the device integrates nanoWatt XLP technology that drops idle consumption into the low-30 nA region, enabling multi-year battery life on a single cell. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, a RISC or CISC CPU core, on-chip program memory (Flash or ROM), data memory (SRAM), non-volatile EEPROM, and a rich set of peripherals such as ADC, timers, and communication ports. The PIC18 family uses an enhanced Harvard RISC architecture that separates program and data buses, allowing simultaneous fetch and execute to deliver high MIPS-per-mW efficiency. Within the broader taxonomy, PIC18F24K22 belongs to the Microchip 8-bit microcontroller family (PIC10, PIC12, PIC16, PIC18), then to the microcontrollers (MCUs) category, then to integrated circuits, and finally to semiconductors. Key features include 25 digital I/O pins, a 10-bit ADC with up to 17 channels, two Enhanced USART modules, two MSSP (SPI/I2C) ports, three 16-bit timers, four 8-bit timers, an Enhanced Capture/Compare/PWM module, and a Charge Time Measurement Unit (CTMU) for capacitive touch. The device integrates an internal 16 MHz oscillator and supports up to 64 MHz via the on-chip PLL. Self-programming under software control enables in-field firmware updates without an external programmer. The PIC18F24K22-I/MV uses CMOS Flash process technology with nanoWatt XLP idle and sleep modes that drop current to as low as 20 nA in sleep with RTCC and 100 nA with the watchdog timer running. The AEC-Q100 qualification extends this same low-power performance into automotive environments, making the part suitable for body, interior, and chassis electronics that must operate reliably across -40C to +125C. Typical applications include automotive body and interior modules, low-power sensor nodes, portable medical instruments, IoT edge devices, consumer white goods, and battery-backed industrial controllers. The wide 1.8V-5.5V operating range (across the PIC18LF24K22 and PIC18F24K22 family) and abundant analog and digital peripherals let a single MCU handle both sensor acquisition and communication in compact designs. When migrating within the PIC18 (L)F2X/4XK22 family, designers should evaluate the I/O count (25), ADC channel count, and supply range; the 28-pin UQFN EP variant is the most space-constrained, while 40-pin and 44-pin variants add peripherals without changing the CPU architecture. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the bare Microchip datasheet, giving engineers a single-page technical reference for the PIC18F24K22-I/MV.

RFQ Contact
PIC18F24K22-I/SP - 8-Bit 64MHz XLP MCU, 16KB Flash | Microchip
PIC18F24K22-I/SP

PIC18F24K22-I/SP - 8-Bit 64MHz XLP MCU, 16KB Flash | Microchip

The Microchip Technology PIC18F24K22-I/SP is an 8-bit PIC microcontroller from the PIC18F K-series family, featuring 16 KB of Flash program memory, 768 bytes of SRAM, and 256 bytes of EEPROM in a 28-pin SPDIP (Skinny Plastic DIP) through-hole package. The device runs up to 64 MHz (16 MIPS with 4-cycle instruction execution) from a 2.3V to 5.5V supply, integrating nanoWatt XLP technology for ultra-low-power operation suitable for battery-powered and energy-harvesting designs. The "-I" suffix indicates the industrial operating temperature range of -40C to +85C. A microcontroller (MCU) is a single-chip computer that combines a CPU core, non-volatile program memory, working RAM, and a rich set of peripheral interfaces. The PIC18 architecture is an 8-bit RISC Harvard-design core from Microchip, well established for deterministic interrupt latency, compact C and assembly code generation, and broad ecosystem support through MPLAB X IDE and the XC8 compiler. PIC MCUs sit in a hierarchy of "8-bit MCU -> microcontroller -> embedded controller -> semiconductor," and the K-series emphasizes low-power operation with advanced peripherals for connected and battery-driven products. Key features of the PIC18F24K22 include 25 digital I/O pins, two Enhanced USART modules supporting LIN and RS-485, two MSSP (SPI/I2C) ports, two CCP and one ECCP capture/compare/PWM modules, a 10-bit ADC with up to 19 channels and 30 ksps conversion rate, two comparators, a 5-bit DAC, and a hardware RTCC with self-tune calibration. The XLP technology delivers typical sleep currents below 50 nA, with multiple power-managed operating modes (RUN, IDLE, SLEEP, and deep-sleep with RTCC retention). On-chip 32 kHz oscillator and INTOSC up to 16 MHz eliminate external crystals in cost-sensitive designs. Typical applications include industrial sensor transmitters, battery-powered IoT nodes, home-automation controllers, HVAC interface panels, and consumer appliances. The wide 2.3V-5.5V supply range simplifies integration with both single-cell Li-ion and 5V regulated rails. The combination of XLP sleep currents, an integrated ADC, and dual serial interfaces lets engineers build compact connected-sensor products without external ADC or RTC chips. When designing with the PIC18F24K22, observe Vdd decoupling guidelines (100 nF + bulk) near each supply pin and reserve dedicated ICSP/ICD pins (PGC/PGD) for in-circuit programming and debugging. This page consolidates distributor pricing, same-package drop-in alternatives, and practical design notes to support faster component selection than browsing the manufacturer datasheet alone.

RFQ Contact
PIC18F24K22-I/SS - 8-bit XLP MCU, 16KB Flash, 28-SSOP | Microchip
PIC18F24K22-I/SS

PIC18F24K22-I/SS - 8-bit XLP MCU, 16KB Flash, 28-SSOP | Microchip

The Microchip Technology PIC18F24K22-I/SS is an 8-bit PIC18 enhanced flash microcontroller featuring 16KB (8K x 16) of program memory, 768 bytes of RAM, and a maximum CPU clock speed of 64 MHz, housed in a 28-pin SSOP (Shrink Small Outline Package). The device integrates nanoWatt XLP (eXtreme Low Power) technology and is part of the PIC18F2xK22 family of 28/40/44-pin low-power, high-performance microcontrollers. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and peripheral interfaces on a single die. The PIC18 architecture uses an enhanced RISC instruction set with a hardware multiplier and 16-bit wide program memory bus, providing higher code density and throughput than baseline PIC16 parts. 8-bit MCUs remain the dominant choice for cost-sensitive, deterministic, low-power embedded applications such as sensor conditioning, motor control, and human-interface nodes. Key differentiating features include a 10-bit ADC with up to 17 channels, multiple Enhanced USART, MSSP (SPI/I2C) peripherals, two comparators, a 5-bit DAC, four 8-bit timers plus three CCP modules, and an internal 16 MHz oscillator with 31 kHz low-power LFINTOSC. The XLP technology enables typical sleep currents below 100 nA with RTCC and watchdog operation, supporting battery-powered designs that must run for years on a single cell. The PIC18F24K22-I/SS is supplied in an industrial (-I) temperature grade suitable for -40C to +85C operation, with supply voltage rated from 2.3 V to 5.5 V. Engineering samples and debug support are provided through the MPLAB X IDE and PICkit/Snap programmers. Two Enhanced Universal Asynchronous Receiver-Transmitter (EUSART) modules plus MSSP with both I2C and SPI modes give designers flexible wired connectivity for sensor hubs, display drivers, and external EEPROM/FRAM. Typical applications include low-power IoT sensor nodes, USB-to-UART bridging, battery chargers, smart metering, white-goods user interfaces, and motor-control sub-systems where deterministic 8-bit timing, low quiescent current, and easy migration from PIC16F/18F legacy code bases are required. Designers using older PIC18F2xK20 designs can usually drop in the K22 variant for more peripherals, more ADC channels, and the XLP power profile. When designing with this part, pay attention to the MSSP pin remapping, ensure the 28-pin variant matches your PCB footprint, and verify that the internal 16 MHz HFINTOSC is sufficient for timing-critical peripherals before adding an external crystal. The device is well supported by the MPLAB Code Configurator (MCC) for rapid peripheral setup. This page synthesizes distributor pricing from DigiKey and Mouser, drop-in same-package alternatives from the PIC18F2xK22 family, and practical design notes that complement - and are not duplicated in - the manufacturer datasheet.

RFQ Contact
PIC18F24K22-I/SSVAO - 16KB Flash 8-bit MCU, SSOP-28 | Microchip
PIC18F24K22-I/SSVAO

PIC18F24K22-I/SSVAO - 16KB Flash 8-bit MCU, SSOP-28 | Microchip

The Microchip Technology PIC18F24K22-I/SSVAO is an 8-bit RISC PIC18 microcontroller with 64 MHz CPU, 16 KB (8K x 16) FLASH program memory, 768 bytes of data RAM, and 256 bytes of data EEPROM, housed in a 28-pin SSOP (VAO automotive-qualified) package. It integrates nanoWatt XLP ultra-low-power technology, nineteen 10-bit ADC channels, two DAC outputs, dual I2C/SPI/USART interfaces, and LIN support. A microcontroller (MCU) is a single integrated circuit that combines a CPU, non-volatile program memory (typically Flash), working RAM, and a configurable set of peripheral blocks (ADC, timers, communication controllers, GPIO). PIC18F-family devices use a 16-bit instruction set with an 8-bit data path (modified Harvard architecture), positioning them between baseline PIC10/12/16 parts and the 16-bit dsPIC/PIC24 families in the Microchip 8-to-32 bit scalability story. They are typically deployed in cost-sensitive embedded designs where deterministic interrupt latency, low sleep current, and small footprint matter more than raw compute throughput. Key features of this part include a 64 MHz maximum clock (16 MIPS instruction throughput), an industrial -40C to +85C temperature range tied to the /I suffix, Brown-Out Reset (BOR), Power-On Reset (POR), dual comparators, nine timers, a Watchdog Timer, and on-chip debug via the MPLAB Snap / ICD interfaces. The XLP nanoWatt technology brings sleep currents below typical MCU class averages, suiting battery-powered designs. The PIC18F24K22 silicon uses a CMOS process with a wide 2.7 V to 5.5 V supply range that allows direct operation from a single Li-ion cell, two AA cells, or a regulated 3.3 V / 5 V rail. The 19-channel 10-bit converter and dual comparators make it suitable for sensor-fusion front ends, while the dual USART, dual SPI, and dual I2C interfaces support multi-bus industrial nodes. Typical applications include automotive body and sensor nodes (VAO suffix designates Automotive grade), industrial control, low-power sensor interfaces, LIN slave nodes, and consumer appliances. The wide operating voltage and XLP modes extend use to metering and portable instrumentation. Designers should budget decoupling capacitance (a 100 nF plus bulk) close to VDD/VSS pins, follow Microchip's SSOP-28 land recommendations, and use the MPLAB X IDE with the XC8 compiler for the lowest-power sleep-mode firmware. This page consolidates pricing, drop-in alternatives, and engineering design notes curated from the Microchip datasheet and authorized distributor pages, complementing the manufacturer documentation with selection-ready guidance.

RFQ Contact
PIC18F24K22T-I/ML - 16KB Flash 8-bit MCU QFN-28 | Microchip
PIC18F24K22T-I/ML

PIC18F24K22T-I/ML - 16KB Flash 8-bit MCU QFN-28 | Microchip

The Microchip Technology PIC18F24K22T-I/ML is an 8-bit PIC18 K22 series microcontroller featuring 16KB Flash program memory, 768 bytes RAM, and 256 bytes EEPROM, supplied in a 28-pin QFN (6x6) package with industrial -40C to +85C temperature rating. The part delivers up to 64 MHz operation (16 MIPS instruction throughput) and integrates nanoWatt XLP extreme low-power technology, plus a 10-bit ADC, two analog comparators, and multiple Enhanced USART, SPI, and I2C peripherals. An 8-bit microcontroller is a single-chip computer based on a RISC CPU with 8-bit data width, integrating Flash program memory, SRAM, EEPROM, timers, communication peripherals, and interrupt control on one silicon die. PIC18 microcontrollers sit at the middle of the 8-bit MCU hierarchy (under PIC10/12/16 base, above PIC24), extending the architecture with C-optimized instruction set, hardware multiply, and large peripheral sets. The PIC18 K22 sub-family layers nanoWatt XLP power management on top, targeting battery-powered and energy-harvesting designs. With its 16KB Flash / 768-byte RAM combination, the PIC18F24K22 occupies the low-density end of the family but retains the full peripheral complement of larger siblings. Key features include 25 digital I/O pins, an integrated programmable 32 kHz to 16 MHz internal RC oscillator, two rail-to-rail analog comparators, a 10-bit ADC with up to 19 channels, and four timers including RTCC with calendar mode. The 28-QFN (6x6) package provides compact QFN-family footprint with a thermal pad for heat dissipation. Memory protection is offered via program code protection and a hardware WDT for reliable unattended operation. The architecture is built around a RISC core with 200 ns instruction execution and a 16-level hardware stack, enabling deterministic real-time response. nanoWatt XLP supports deep sleep currents in the nanoamp range, making the device suitable for IEC 60601 battery-backed medical sensors and remote sensor nodes. The integrated charge time measurement unit (CTMU) supports capacitive touch, button, slider, and liquid-level interfaces without external components. Typical applications include industrial IoT sensor nodes, home automation appliances, automotive interior modules, low-power medical devices, USB HID peripherals, and consumer electronics. The wide 1.8 V to 5.5 V operating range (matched to lithium chemistries) and an extended temperature grade further extend the use case envelope. When designing with this device, ensure the QFN thermal pad is soldered to a sufficiently sized copper pour to keep junction temperature within limits and follow Microchip MPLAB X IDE for firmware development. The CTMU peripheral calibration constants are stored in Flash and should be locked to preserve touch-tuning accuracy across production runs. This page synthesizes distributor pricing and stock data, drop-in alternatives drawn from the same QFN-28 PIC18 family, and design guidance not consolidated in the manufacturer datasheet.

RFQ Contact
PIC18F24K22T-I/MV - 16KB Flash 8-bit MCU 28-UQFN | Microchip
PIC18F24K22T-I/MV

PIC18F24K22T-I/MV - 16KB Flash 8-bit MCU 28-UQFN | Microchip

The Microchip PIC18F24K22T-I/MV is an 8-bit PIC18 microcontroller from the nanoWatt XLP family, featuring 16KB of Flash program memory (8K x 16), 768 bytes of SRAM, and a 256-byte EEPROM, all integrated in a compact 28-pin UQFN (4x4 mm) package. It operates at up to 64 MHz instruction clock and integrates a 10-bit ADC with up to 17 channels, multiple Enhanced USART, MSSP (SPI/I2C) peripherals, and two comparators for mixed-signal embedded designs. The T-suffix indicates Tape & Reel packaging, the I-suffix denotes the industrial temperature range (-40C to +85C), and the MV package suffix specifies the 28-UQFN 4x4 mm option. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, data RAM, and integrated peripherals such as timers, ADC/DAC, communication interfaces, and GPIO. PIC18 MCUs use a modified Harvard RISC architecture that delivers 1 instruction per clock cycle (vs 12 for legacy PIC16), giving higher throughput at lower clock rates. They sit within the broader semiconductor hierarchy: MCU -> embedded processor -> semiconductor device, and are widely used where deterministic real-time control, low power, and small package size are required. Key features of the PIC18F24K22T-I/MV include nanoWatt XLP technology with multiple low-power sleep modes (down to ~20 nA typical), 25 general-purpose I/O pins, an internal 16 MHz oscillator with PLL support, and 2 capture/compare/PWM modules with enhanced resolution. The 256-byte data EEPROM supports 1M erase/write cycles, and the Flash supports 10K erase/write cycles. Programmable BOR, POR, and WDT simplify firmware safety. Technically, the part runs from 2.3V to 5.5V across -40C to +125C (E temperature grade) or -40C to +85C (I grade) and is implemented in CMOS process technology. The 28-UQFN package with 4x4 mm footprint is ideal for space-constrained designs and supports surface-mount reflow soldering with MSL3 moisture sensitivity. Self-programmability under software control supports in-application firmware updates without external programmers. Typical applications include low-power IoT sensor nodes, battery-powered instrumentation, automotive body controllers, consumer appliance control panels, and USB/HID edge nodes when paired with an external transceiver. The wide voltage range and rich peripheral mix make it a strong fit for industrial sensor interfaces and motor-control front ends. When designing with this MCU, plan for ICSP programming on pins RB6/ICSP-CLK and RB7/ICSP-DAT, ensure adequate bulk decoupling (10 uF + 100 nF near VDD), and reserve an unused I/O for MCLR pull-up. The UQFN package requires thermal pad soldering per JEDEC J-STD-020 reflow profiles. This page consolidates distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ Contact
PIC18F24K40-E/ML - 64MHz 8-bit MCU 16KB Flash 28-QFN | Microchip
PIC18F24K40-E/ML

PIC18F24K40-E/ML - 64MHz 8-bit MCU 16KB Flash 28-QFN | Microchip

The Microchip Technology PIC18F24K40-E/ML is a 64 MHz 8-bit PIC18 microcontroller with 16 KB Flash, 1 KB SRAM, and 256 B EEPROM in a 28-pin QFN (6x6 mm) package. The -E suffix indicates the extended automotive temperature grade of -40C to +125C. It integrates a 24-channel 10-bit ADC, a 5-bit DAC, comparators, PWM, CCP, CWG, HLT, WWDT, and SCAN/CRC peripherals onto a single Core Independent Peripherals (CIP) platform. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, timers, and I/O peripherals around an 8-bit data path. PIC18F-series MCUs sit in Microchip's mid-range 8-bit lineup (PIC10/12/16/18 family), chosen for low cost, deterministic interrupt latency, and a mature toolchain (MPLAB X, XC8). The PIC18F24K40-E/ML sits in the MCU -> microcontroller -> 8-bit MCU -> PIC18 hierarchy and is widely used as a drop-in upgrade for legacy PIC16/PIC18 designs that need more analog and richer peripherals. Key features include 16 KB self-programmable Flash, 1 KB SRAM, 256 B EEPROM, 64 MHz operation, 24-channel 10-bit ADC, 5-bit DAC, two comparators, 10-bit PWM with CCP, Complementary Waveform Generator (CWG), Hardware Limit Timer (HLT), Windowed Watchdog Timer (WWDT), and CRC/Memory Scan. XLP (eXtreme Low Power) technology delivers <50 nA typical sleep current with RTCC. The 28-QFN package with exposed thermal pad supports 25 I/O pins and provides a low-thermal-resistance path for higher-current GPIO drive. Technical depth: the CIP architecture lets the CWG, ADC, DAC, comparators, and timers operate without CPU intervention, enabling deterministic hardware-driven control loops for motor, power-conversion, and lighting applications. The 64 MHz core delivers 16 MIPS of throughput, while Peripheral Pin Select (PPS) remaps digital functions to any I/O, simplifying PCB layout. The integrated Hardware Limit Timer (HLT) provides fault-rate-limited PWM shutdown for safety-critical applications. Typical applications include automotive body and interior modules, IoT sensor nodes, battery-powered sensor hubs, BLDC and stepper motor control, digital lighting, and home appliances. The extended -40C to +125C temperature range makes the -E/ML variant particularly suitable for underhood automotive and harsh-environment industrial designs. Design consideration: confirm the 28-QFN footprint matches your PCB land pattern and that the exposed thermal pad is soldered to a sufficient copper pour for heat spreading. Programming via ICSP requires dedicated RG0/PGD, RG1/PGC, and MCLR/VPP pins routed for probe access. Plan PPS assignments early because peripheral-to-pin remapping occurs at runtime and can save board space but complicates firmware reuse. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Contact
PIC18F24K40-E/MV - 8-bit XLP MCU 16KB Flash 28-UQFN | Microchip
PIC18F24K40-E/MV

PIC18F24K40-E/MV - 8-bit XLP MCU 16KB Flash 28-UQFN | Microchip

The Microchip Technology PIC18F24K40-E/MV is an 8-bit PIC18 microcontroller built on the XLP (eXtreme Low Power) platform, delivering 64 MHz CPU performance with 16 KB Flash, 1 KB RAM, and 256 B EEPROM in a compact 28-pin UQFN (4x4 mm) package. The 64 MHz internal oscillator enables 16 MIPS throughput, while the 16 KB (8K x 16) Flash program memory supports embedded firmware for general-purpose control tasks. Background knowledge: An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, Flash, EEPROM, and peripheral interfaces on one die. The PIC18 family is Microchip's mid-range 8-bit architecture, enhanced over the PIC16 line with a 16-bit instruction word, hardware multiplier, and linear program memory up to 128 KB. XLP technology is Microchip's branding for ultra-low-power peripherals (deep sleep, nanoWatt), letting these parts run for years on a coin cell. Within Microchip's hierarchy: 8-bit MCU -> PIC18 -> PIC18 K40 sub-family (XLP + Core Independent Peripherals). Key differentiating features include 25-core-independent CIPs such as CWG (Complementary Waveform Generator), WWDT (Windowed Watchdog Timer), CRC/Memory Scan, Hardware CVD (Capacitive Voltage Divider), Zero-Cross Detect, and Peripheral Pin Select (PPS) for flexible signal routing. The device integrates a 10-bit ADC with Computation (ADC2), a 5-bit DAC, two comparators, multiple PWM/CCP channels, and EUSART/I2C/SPI. Operating voltage spans 2.3 V to 5.5 V, suitable for both 3.3 V and 5 V rails. The 'E' suffix denotes the Extended (-40 °C to +125 °C) operating temperature range, while 'MV' is the package designator for the 28-pin UQFN 4x4 mm. The part is well suited for industrial control, IoT edge nodes, and consumer appliances where small footprint and low power are critical. Typical applications include sensor hubs, battery-powered IoT nodes, home appliances, motor control loops, LED lighting controllers, and USB/CAN bridge prototypes. The combination of PPS and CIPs allows peripheral mapping without PCB changes, accelerating time-to-market. When designing with this part, allocate 1 µF + 0.1 µF decoupling near each power pin and follow Microchip AN1078 for low-power sleep currents. Use PPS registers to remap peripheral I/O without external muxes. Ensure unused I/O are configured as outputs low to minimize leakage. This page synthesizes distributor pricing, drop-in alternatives from Microchip's PIC18 family, and practical design notes not found in the manufacturer datasheet. Cross-reference data and same-package alternatives are provided below for engineers evaluating second-source or migration paths.

RFQ Contact
PIC18F24K40-E/SO - 8-bit XLP MCU, 16KB Flash, 64MHz | Microchip
PIC18F24K40-E/SO

PIC18F24K40-E/SO - 8-bit XLP MCU, 16KB Flash, 64MHz | Microchip

The Microchip Technology PIC18F24K40-E/SO is an 8-bit RISC microcontroller featuring the enhanced PIC18 CPU core, delivered in a 28-pin SOIC (300-mil) package with 16KB of Flash program memory, 1KB of SRAM, and 256 bytes of data EEPROM. It operates at up to 64MHz (16 MIPS) and is fabricated in CMOS technology, targeting 5V-tolerant general-purpose applications including consumer, industrial, and automotive (-40C to +125C) designs. An 8-bit microcontroller is a single-chip computer built around an 8-bit data bus; the PIC18 lineage from Microchip Technology is positioned between traditional 8-bit controllers (e.g., 8051) and 32-bit ARM Cortex-M MCUs, offering deterministic instruction execution, low cost, and a wide peripheral set. The K40 sub-family specifically extends Microchip's XLP (eXtreme Low Power) DNA into 5V-capable silicon, bridging the gap between 3.3V-only XLP parts and legacy 5V PIC18F K-series designs. Key features of the PIC18F24K40 include a 10-bit ADC with Computation (ADC2), a 5-bit DAC, three comparators, PWM, CCP, the Configurable Logic Cell (CLC) plus Complementary Waveform Generator (CWG), Windowed Watchdog Timer (WWDT), Hardware Limit Timer (HLT), and SCAN/CRC for memory integrity checking. Core Independent Peripherals (CIPs) such as CWG and the WWDT allow tasks like complementary PWM generation or windowed supervision without waking the CPU. Architecturally, the device uses an 8-bit PIC18 Harvard architecture with separate program (Flash) and data (SRAM) buses and a 16-bit instruction word. This decoupling of instruction and data paths is what allows one instruction per cycle (16 MIPS at 64MHz) and predictable interrupt latency. The "E" temperature grade suffixes the part to -40C to +125C operation, suiting AEC-Q100-style automotive and harsh-industrial deployments. Typical applications for the PIC18F24K40-E/SO include low-power sensor nodes (XLP nanoWatt XLP sleep modes drop quiescent current into the sub-uA range), fan/small-motor BLDC control via the CWG and 10-bit ADC, household appliances with user interfaces and LED driving, IoT end-node controllers, and automotive interior/sensor modules. The 5V-tolerant I/O and ample analog make it a good fit for battery chargers and industrial control boards as well. When designing in this part, reserve adequate decoupling (100nF + bulk per VDD pin pair) close to the package, follow Microchip's in-circuit debug (ICD) guidance for ICSP pins (RB6/RB7), and verify that the chosen 5V rail tolerance is sufficient for your supervisory design. E-grade parts are the right pick when industrial or automotive temperature conformance is required. This page consolidates real-time distributor pricing, drop-in qualified alternatives, parametric comparison data, and practical design notes - information not found in any single manufacturer datasheet source.

RFQ Contact
PIC18F24K40-E/SP - 8-bit 64MHz MCU, 16KB Flash, XLP | Microchip
PIC18F24K40-E/SP

PIC18F24K40-E/SP - 8-bit 64MHz MCU, 16KB Flash, XLP | Microchip

The Microchip Technology PIC18F24K40-E/SP is an 8-bit PIC18 microcontroller in the 28-pin SPDIP package, featuring 16 KB of Flash program memory, 1 KB of RAM, and 256 B of EEPROM, with a maximum CPU clock of 64 MHz. The -E suffix designates the extended industrial operating temperature grade of -40C to +125C, while the /SP suffix marks the through-hole SPDIP-28 form factor. It is part of the PIC18F "K40" family that combines Microchip's eXtreme Low Power (XLP) technology with rich Core Independent Peripherals (CIP) such as CWG, WWDT, CRC/SCAN, ZCD, and PPS. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and a configurable set of peripheral interfaces. Within the broader taxonomy it belongs to: MCU -> 8-bit microcontroller -> PIC18 family -> PIC18F K-series -> power-conscious general-purpose controller. The "F" denotes Flash program memory, the "K" identifies the K40 low-power generation, and the "40" locates this part within the 28-pin Flash-equipped tier of the family. Key features include a 10-bit ADC with computation, a 5-bit DAC, two comparators, multiple PWM/CCP/CWG channels, and a Windowed Watchdog Timer (WWDT) for safety-critical loops. The integrated Peripheral Pin Select (PPS) module allows digital peripherals to be remapped to a wide range of I/O pins, simplifying PCB routing when compared with older PIC18 generations. Zero-Cross Detect (ZCD) and the Hardware Limit Timer (HLT) further reduce CPU load for AC-line and motor-control applications. The K40 family is built on an enhanced PIC18 Harvard architecture with a 16-bit instruction word, an 8-level hardware stack, and a modified RISC pipeline that delivers up to 16 MIPS at 64 MHz. XLP technology brings nanoWatt features such as IDLE and DOZE modes, Peripheral Module Disable (PMD), and a low-power Sleep mode that drops current consumption to the nanoampere range while preserving RAM and interrupt wake-up capability. Typical applications include appliance control, IoT edge nodes, industrial sensor interfaces, automotive body and lighting subsystems, and any 5V-tolerant embedded design that benefits from low quiescent current and a small SPDIP footprint. The SPDIP-28 package is especially popular for breadboarding, educational kits, and through-hole production builds where hand-soldering or rework is required. When designing with the PIC18F24K40-E/SP, leave VDD/VSS decoupling ceramic capacitors (typically 100 nF) within a few millimeters of the pins and respect the ICSP programming interface requirements (PGD/PGC on dedicated pins). For power-sensitive designs, exploit IDLE and Sleep modes plus PMD to gate unused peripherals and benchmark current consumption against the datasheet's nanoWatt typical curves before finalizing the BOM. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet - giving engineers a single-source reference for evaluation, sourcing, and design-in decisions.

RFQ Contact
PIC18F24K40-E/SS - 16KB Flash 28-pin XLP MCU | Microchip
PIC18F24K40-E/SS

PIC18F24K40-E/SS - 16KB Flash 28-pin XLP MCU | Microchip

The Microchip Technology PIC18F24K40-E/SS is an 8-bit PIC18 microcontroller with 16 KB Flash, 1 KB RAM, and 256 B EEPROM, housed in a 28-pin SSOP package and operating from 2.3 V to 5.5 V at up to 64 MHz. It combines Core Independent Peripherals such as CWG, WWDT, CRC/SCAN, and HLT with XLP (eXtreme Low Power) technology, and supports both 3.3 V and 5 V rails. An 8-bit microcontroller (MCU) is a programmable processor that executes instructions 8 bits at a time, integrating Flash program memory, SRAM data memory, EEPROM, digital I/O, and analog peripherals on a single die. In the embedded system hierarchy, the MCU sits above discrete logic ICs and below 32-bit application processors, providing deterministic control for sensor reading, actuator driving, and human-machine interface tasks. The PIC18 family extends Microchip's mid-range 8-bit core with linear memory, C-compiler friendly architecture, and rich peripheral integration. Key features include a 10-bit ADC with computation, a 5-bit DAC, two comparators, multiple PWM/CCP channels, and 24 I/O pins capable of interrupt-on-change. The device supports up to 64 MHz operation from its internal 16 MHz HFINTOSC (4x PLL), giving 16 MIPS throughput, while XLP technology keeps active current around 5 mA at 5 V/16 MHz and standby current below 50 nA in sleep mode. The PIC18F24K40 leverages Microchip's enhanced mid-range core with a 16-bit instruction word and 8-bit data path, providing deterministic 4-clock instruction cycles and a hardware multiplier. Its Core Independent Peripherals (CIPs) like CWG, NCO, and DSM offload waveform generation and timing from the CPU, reducing firmware complexity and improving real-time performance in closed-loop control loops. Typical applications include low-power IoT sensor nodes, battery-powered IoT form units, industrial control and sensor conditioning, LED lighting controllers, and consumer appliances requiring 5 V tolerance. The wide 2.3-5.5 V range also makes it ideal for automotive body electronics and USB device peripherals (via the dedicated USB-capable variants in the family). When designing with this MCU, place a 0.1 uF decoupling capacitor as close as possible to each VDD pin and a 10 uF bulk capacitor on the main rail. For low-noise analog sampling, use separate AVSS/AGND isolation and avoid routing digital signals under the ADC input traces to preserve the 10-bit ADC linearity. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving an engineer a single reference point for evaluation, BOM optimization, and lifecycle decisions.

RFQ Contact
PIC18F24K40-I/ML - 8-bit MCU, 16KB Flash, 28-QFN | Microchip
PIC18F24K40-I/ML

PIC18F24K40-I/ML - 8-bit MCU, 16KB Flash, 28-QFN | Microchip

The Microchip Technology PIC18F24K40-I/ML is an 8-bit PIC microcontroller built on the enhanced mid-range core running up to 64 MHz, integrating 16 KB of Flash program memory, 1 KB of SRAM, and 256 bytes of EEPROM in a 28-pin 6x6 mm QFN package with an exposed thermal pad. It supports wide-voltage operation from 1.8 V to 5.5 V (F variant) and is qualified for the industrial -40C to +85C temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and a rich set of programmable peripherals around a shared bus. PIC microcontrollers sit in the broader hierarchy of embedded microcontrollers -> 8-bit microcontrollers -> RISC microcontrollers -> semiconductor ICs. The PIC18F family is Microchip's enhanced mid-range line, bridging legacy PIC16F parts and the 16-bit PIC24/dsPIC families, and is widely used in cost-sensitive, low-power, mixed-signal embedded designs. Key differentiating features of the PIC18F24K40 include eXtreme Low Power (XLP) technology with nanoWatt XLP sleep currents, a 10-bit ADC with Computation (ADC2) for automated averaging and threshold comparison, a 5-bit DAC, two comparators, PWM, CCP, the Complementary Waveform Generator (CWG) for half-bridge and full-bridge driver control, a Windowed Watchdog Timer (WWDT), and hardware CRC/SCAN for memory integrity. The 28-QFN (ML) footprint suits compact layouts where thermal dissipation through the exposed pad is desirable. The architecture combines an 8-bit data path with a 16-bit instruction word and a hardware multiplier, giving 16 MIPS peak throughput at 64 MHz. The ADC2 peripheral off-loads filtering from the CPU, while CIPs (Core Independent Peripherals) such as CWG and WWDT run without core intervention, freeing the CPU for application code. Typical applications include low-power IoT sensor nodes, battery-powered consumer appliances, industrial control and HVAC peripherals, automotive body and lighting subsystems, and USB or human-interface front-ends that need moderate Flash but stringent power budgets. The wide 1.8 V - 5.5 V supply range also supports direct connection to a single-cell Li-ion or 3.3 V system rail. When designing with this part, place a 100 nF decoupling capacitor close to VDD and tie the exposed thermal pad to ground for thermal and electrical performance. The ICSP/ICD pins (PGED/PGEC) must be brought out for in-circuit debug, and the MCLR pin should use the recommended 10 kohm pull-up network specified in the Microchip PIC18F2X/4XK40 family datasheet.

RFQ Contact
PIC18F24K40-I/MV - 8-bit 64MHz MCU, 16KB Flash, 28-UQFN | Microchip
PIC18F24K40-I/MV

PIC18F24K40-I/MV - 8-bit 64MHz MCU, 16KB Flash, 28-UQFN | Microchip

The Microchip PIC18F24K40-I/MV is a 8-bit PIC18 enhanced mid-range microcontroller running up to 64 MHz, integrating 16 KB Flash, 1 KB RAM, and 256 B EEPROM, and housed in a 28-pin UQFN (MV) 4x4 mm surface-mount package. The part carries -40C to +85C industrial-grade temperature rating and supports a wide 2.3 V to 5.5 V supply range. It belongs to the PIC18 "K40" XLP (eXtreme Low Power) family that introduces Core Independent Peripherals (CIPs) to the legacy PIC18 product line. An 8-bit microcontroller (MCU) is a single-chip computer integrating a central processing unit, non-volatile program storage (Flash/ROM), working RAM, and configurable I/O peripherals. Within the broader semiconductor taxonomy, the PIC18F24K40 sits under the PIC18 family (an 8-bit CISC enhanced mid-range architecture), under the Microchip 8-bit MCU portfolio, and ultimately under the microcontroller category of embedded semiconductors. The 8-bit segment remains the workhorse for cost- and power-sensitive applications where deterministic real-time response, simple toolchains, and ease of programming outweigh raw computational throughput. Key features include 24 digital I/O pins, a 10-bit ADC with acquisition channel sharing, a 5-bit DAC, two comparators with selectable reference, Zero-Cross Detect (ZCD), a Complementary Waveform Generator (CWG), Windowed Watchdog Timer (WWDT), CRC/Memory Scan, Peripheral Pin Select (PPS), and serial interfaces comprising EUSART, SPI, and I2C. XLP technology delivers nanoWatt sleep currents suitable for battery-powered IoT and sensor nodes that spend most of their life in idle or doze modes. Architecturally, the device uses the enhanced mid-range PIC18 core with a modified Harvard bus and hardware multiplier, with an instruction set tuned for C-compiled code. The CIP block lets timers, PWMs, and communication peripherals operate without CPU intervention, freeing the core for application logic and reducing firmware complexity and BOM cost in motor control, lighting, and power-conversion front-ends. Typical applications include low-power IoT sensor nodes, LED lighting controllers, battery chargers, small appliances and white goods, automotive body and interior modules (using the -Q1 variant), HVAC controls, and general-purpose 5V embedded logic replacements. Wide 2.3-5.5V operation and robust peripheral integration make it a flexible drop-in upgrade for legacy PIC16F and early PIC18F designs. When designing with this part, prioritize decoupling with a 100 nF ceramic capacitor close to VDD plus a bulk cap on AVDD, and use PPS early to assign peripheral functions to convenient pins. Verify whether your firmware assumes 28-pin SPDIP/SSOP/SOIC layout versus the UQFN footprint before committing to PCB. This page synthesizes distributor pricing, drop-in same-package alternatives, application guidance, and design notes that complement (but do not replace) the manufacturer datasheet for design-in evaluation.

RFQ Contact
PIC18F24K40T-I/ML - 8-Bit XLP MCU, 16KB Flash, 28-QFN | Microchip
PIC18F24K40T-I/ML

PIC18F24K40T-I/ML - 8-Bit XLP MCU, 16KB Flash, 28-QFN | Microchip

The Microchip Technology PIC18F24K40T-I/ML is an 8-bit PIC18 microcontroller built on the extreme low-power (XLP) architecture, delivering 64 MHz performance with 16 KB Flash, 1 KB SRAM and 256 B EEPROM in a 28-pin 6x6 mm QFN package. The device operates from 1.8 V to 5.5 V, supports 5 V rail-tolerant I/O and provides rich Core Independent Peripherals (CIPs) such as CWG, WWDT, CRC/Memory Scan, Hardware CVD, Zero-Cross Detect and Peripheral Pin Select. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path. PIC18F "K-series" parts combine the legacy PIC mid-range instruction set with enhanced peripherals, XLP nanoWatt sleep modes (down to ~30 nA typical), and on-chip op amps / comparators that previously required external components. They sit in the hierarchy: 8-bit MCU -> microcontroller -> embedded computing -> semiconductor. Key features include ten 10-bit ADCs with Computation (ADC2), a 5-bit DAC, four configurable logic cells, 4 CCP/ECCP/PWM channels, an on-chip 32 MHz internal oscillator, EUSART plus SPI/I2C, and 36-level instruction width. The XLP IDLE/DOZE/PMD power modes plus Peripheral Module Disable let unused peripherals consume zero current, enabling years of battery life in always-on sensor nodes. Architecture-wise, the PIC18F24K40 family uses an enhanced mid-range RISC core that executes most instructions in one cycle, supported by a wide 31-level hardware stack and interrupt priority levels. Hardware CVD (Capacitive Voltage Divider) lets the chip read mTouch capacitive touch sensors without an external conversion IC, while Zero-Cross Detect simplifies AC mains zero-crossing switching applications. Typical applications include low-power IoT sensor nodes, battery-powered thermostats and metering, capacitive touch user interfaces, automotive body and interior modules, USB-free home appliances, and motor control loops driving brushed or small BLDC loads. The combination of 5V tolerance on I/O and 1.8V minimum operation suits wide industrial range designs. When designing with this MCU, ensure the PICKit or Snap programmer is connected to the ICSP pins (RA0/RA1/RA3) during development. Decoupling: place a 100 nF X7R capacitor within 3 mm of each VDD/AVDD pin and a 10 uF bulk capacitor near the package. Brown-out and watchdog should be enabled for safety-critical workloads. This page synthesizes distributor pricing, drop-in alternative MPNs, parametric comparisons, and practical design notes drawn from manufacturer datasheets, providing information that individual distributor product pages do not aggregate.

RFQ Contact
PIC18F24K40T-I/MV - 16KB Flash 8-bit MCU XLP 28-UQFN | Microchip
PIC18F24K40T-I/MV

PIC18F24K40T-I/MV - 16KB Flash 8-bit MCU XLP 28-UQFN | Microchip

The Microchip Technology PIC18F24K40T-I/MV is an 8-bit PIC microcontroller from the PIC18F-K40 family, offering 16 KB Flash, 1 KB RAM, and 256 B EEPROM in a 28-pin UQFN (4x4 mm) package with exposed pad. It runs up to 64 MHz across a 2.3V to 5.5V operating range, with the trailing "T" suffix denoting Tape & Reel packaging and "I" indicating the industrial -40C to +85C temperature grade. An 8-bit microcontroller is a single-chip computer built around an 8-bit data path, optimized for deterministic real-time control and low-power embedded applications. Within the broader taxonomy, the PIC18F24K40 belongs to the PIC18 family of Microchip's 8-bit PIC microcontrollers, which itself sits under the wider class of microcontrollers (MCUs), then microprocessors, and ultimately semiconductors. The XLP (eXtreme Low Power) technology inside the K40 sub-family is purpose-built for battery-powered or energy-harvesting systems where nanoamp sleep currents are mission-critical. Key features include a 10-bit Analog-to-Digital Converter with Computation (ADCC) enabling hardware Capacitive Voltage Divider (CVD) touch sensing, a 5-bit DAC, multiple comparators, PWM, CCP, CWG, hardware limit timer (HLT), windowed watchdog timer (WWDT), and scan-based CRC. The 28-UQFN package is footprint-compatible with other 28-pin PIC18F-K40 variants such as the PIC18F24K40-I/ML and PIC18F24K22-I/MV, simplifying PCB reuse across product families. Typical applications include consumer electronics, IoT sensor nodes, low-power remote controls, capacitive touch user interfaces, LED lighting controllers, and small appliance control boards where a tiny 4x4 mm footprint, 5V tolerance, and sub-microamp sleep modes are all required simultaneously. Industrial-grade operation supports factory-floor and outdoor equipment. The Peripheral Pin Select (PPS) module allows flexible peripheral-to-pin mapping, reducing layout constraints. When designing with this part, review the memory map and pinout differences versus older PIC18F-K22 devices - K40 peripherals differ in register layout. For lowest sleep current, switch to the IDLE/SLEEP modes with peripherals disabled per Microchip application note AN2341. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing engineers with a one-stop reference for component selection.

RFQ Contact
PIC18F24K40T-I/SS - 8-bit MCU, 16KB Flash, 64MHz, 28-SSOP | Microchip
PIC18F24K40T-I/SS

PIC18F24K40T-I/SS - 8-bit MCU, 16KB Flash, 64MHz, 28-SSOP | Microchip

The Microchip Technology PIC18F24K40T-I/SS is an 8-bit PIC18 microcontroller from the PIC18F24/25K40 family, offering 16KB Flash, 1KB RAM, and 256B EEPROM in a 28-pin SSOP package with a maximum CPU speed of 64MHz. It operates across 2.3V to 5.5V supply rails and includes a 10-bit ADC, 5-bit DAC, comparators, CCP, PWM, CWG, HLT, WWDT, SCAN/CRC, ZCD, PPS, EUSART, and SPI/I2C peripherals, all integrated into a low-power XLP architecture. The PIC18F family of microcontrollers is an 8-bit Harvard-architecture MCU line from Microchip Technology, widely used in embedded systems that require deterministic real-time control, ease of programming, and a rich peripheral set. Within the broader taxonomy, PIC18F devices are members of the 8-bit microcontroller class, which also encompasses the PIC16F and PIC12F lines, and they sit alongside 16-bit dsPIC and 32-bit PIC32 families in Microchip's MCU portfolio. The K40 sub-series specifically targets low-power (XLP) and mixed-signal applications, positioning the PIC18F24K40 between general-purpose PIC18F-K20/K22 parts and higher-pin-count PIC18F-K42/K83 devices. Key features that distinguish the PIC18F24K40T-I/SS include its 16KB self-programmable Flash program memory with EEPROM emulation, hardware CRC and Memory Scan accelerators for functional safety, a 10-bit ADC with computation (ADC2), a 5-bit DAC for bias generation, and Core Independent Peripherals such as the Complementary Waveform Generator (CWG) and Zero-Cross Detect (ZCD). The XLP technology delivers sleep currents under 50 nA typical, while the Peripheral Pin Select (PPS) feature allows flexible signal routing on most digital I/O pins. Typical applications include low-power sensor nodes, consumer appliance controllers, automotive body and lighting subsystems, industrial control panels, and USB-to-UART bridges where the integrated EUSART and PPS simplify BOM. The industrial temperature grade of -40C to +85C (denoted by the -I suffix) makes it suitable for outdoor enclosures and factory-floor equipment. When designing with this part, prioritize the PPS configuration early in firmware development to lock down peripheral pin assignments before PCB layout finalization, and budget for the 5V-tolerant I/O when interfacing with legacy 5V peripherals. The device's 28-SSOP footprint is a drop-in option for the broader PIC18F24K40 and PIC18F24K22 families, simplifying PCB reuse.

RFQ Contact
PIC18F24K42-E/ML - 8-bit 64MHz 16KB Flash MCU | Microchip
PIC18F24K42-E/ML

PIC18F24K42-E/ML - 8-bit 64MHz 16KB Flash MCU | Microchip

The Microchip Technology PIC18F24K42-E/ML is an 8-bit PIC microcontroller delivering 64 MHz CPU performance with 16 KB Flash program memory, 1 KB SRAM, and 256 B EEPROM, packaged in a 28-pin QFN (ML, 6x6 mm) with an exposed pad. It features a 12-bit ADC with Computation (ADC2), vectored interrupts, DMA, MAP, DIA, DAC, comparators, and PWM peripherals, all integrated on-chip. The -E suffix designates the extended industrial temperature grade of -40C to +125C. A microcontroller (MCU) is a single-chip computer containing a CPU core, volatile and non-volatile memory, and programmable peripherals. The PIC18F family is Microchip's high-performance 8-bit architecture, positioned between the baseline PIC10/12/16 families and the 16-bit dsPIC/dsPIC33 families. Within the PIC18 family, the K42 sub-family integrates the rich set of core-independent peripherals (CIPs) and intelligent analog peripherals designed for low-power mixed-signal embedded designs. The XLP (eXtreme Low Power) technology allows deep-sleep currents in the nanoamp range, enabling battery-powered applications. Key differentiating features include the 12-bit ADC2 with computation engine, which automates Capacitive Voltage Divider (CVD) for advanced touch sensing, plus hardware averaging, filtering, oversampling and threshold comparison. The vectored interrupt controller provides fixed-latency interrupt handling for deterministic real-time response. Direct Memory Access (DMA) moves data between peripherals and memory without CPU intervention, freeing cycles for application logic. The Peripheral Pin Select (PPS) provides flexible signal routing, simplifying PCB layout. This PIC18F24K42 device uses a pipelined C-optimized architecture with a hardware multiplier, 49 instruction set, and 16-level stack. The operating voltage range is 1.8V to 5.5V (extended), and the part includes multiple low-power modes (Doze, Idle, Sleep, Deep Sleep). The CIPs include a Complementary Waveform Generator (CWG), multiple Capture/Compare/PWM (CCP) modules, and configurable logic cells, which allow peripheral interconnections without external glue logic. Typical applications include low-power IoT sensor nodes, capacitive touch user interfaces, HVAC and building control, LED lighting control, consumer appliances, battery chargers, and automotive body modules. Industrial 4-20 mA loop-powered instruments benefit from the nanoamp sleep current. In automotive body electronics, the device can drive LED arrays, read multiple sensor inputs via ADC2, and run LIN slave protocol using the UART with auto-baud. When designing with this MCU, place a 100 nF decoupling capacitor on every VDD pin and a bulk 10 uF tantalum or ceramic capacitor near the package. The exposed thermal pad (EP) must be soldered to a continuous ground copper pour for electrical grounding and thermal dissipation. Use MPLAB X IDE with the XC8 compiler for development; program the part via ICSP using PGED1/PGEC1 pins or via the unified programming pin pair. The PPS feature requires configuration of PPSLOCK to prevent accidental remapping. This page consolidates distributor pricing, drop-in same-package alternatives, and practical design notes that go beyond the manufacturer datasheet. Cross-references include PIC18F24K42 family members and competitors sharing the 28-pin QFN (ML) footprint.

RFQ Contact
PIC18F24K42-E/MV - 8-Bit 64MHz MCU, 16KB Flash, 28-UQFN | Microchip
PIC18F24K42-E/MV

PIC18F24K42-E/MV - 8-Bit 64MHz MCU, 16KB Flash, 28-UQFN | Microchip

The Microchip Technology PIC18F24K42-E/MV is a high-performance 8-bit PIC microcontroller built on the enhanced mid-range core, integrating 16 KB of Flash program memory, 1 KB of SRAM, and 256 bytes of EEPROM in a compact 28-pin UQFN (4x4 mm) package. It executes instructions at up to 64 MHz (16 MIPS throughput) and is part of the PIC18FxxK42 family of XLP (eXtreme Low Power) microcontrollers that target low-power, intelligent-analog, and core-independent peripheral applications. The device supports an operating voltage range of 1.8 V to 5.5 V and is specified for the automotive extended temperature grade of -40C to +125C. An 8-bit microcontroller (MCU) is a single-chip computer that combines a CPU, non-volatile program memory (Flash), volatile data memory (RAM), EEPROM, and a configurable set of peripherals on a single silicon die. PIC18F-series MCUs belong to the broader class of microcontrollers -> embedded controllers -> semiconductors. Microcontrollers are the computational backbone of virtually every modern electronic product, from sensor nodes to automotive ECUs, and the 8-bit class retains a strong foothold in cost-sensitive, deterministic-control applications where low power and rapid interrupt response outweigh raw processing throughput. Key differentiating features include Core Independent Peripherals (CIPs) such as CLC (Configurable Logic Cell), CWG (Complementary Waveform Generator), HLT (Hardware Limit Timer), and the Numerically Controlled Oscillator (NCO), which offload tasks from the CPU to dedicated hardware. Intelligent analog includes a 12-bit ADC2 with Computation, two 8-bit DACs, two comparators with 5-bit DAC reference, and zero-cross detection. DMA enables data movement without CPU involvement, while vectored interrupts with peripheral-priority encoding reduce interrupt latency for time-critical events. These features collectively differentiate the PIC18F24K42-E/MV from earlier PIC18F generations such as K22 and K40, which lack CLC and ADC2 with Computation. Typical applications for the PIC18F24K42-E/MV include automotive body electronics, sensor conditioning and IoT edge nodes, BLDC/PMSM motor control (often paired with the CWG), LED lighting controllers, and small-form-factor consumer devices where the 4x4 mm UQFN footprint saves PCB area. The integrated 12-bit ADC2 and zero-cross detect enable direct connection to TRIAC-dimmable AC-line applications without external zero-cross circuitry. When designing with this device, observe the recommended decoupling practice of one 100 nF ceramic capacitor per VDD pin placed within 2 mm of the pin, plus a 10 uF bulk capacitor at the regulator output. The UQFN package requires careful PCB land pattern design per IPC-7351; avoid hand-soldering in production. The automotive -E temperature grade extends operation to +125C, qualifying the device for under-hood and body-control modules.

RFQ Contact