Products (20,000+)

PIC32MZ2064DAS169-V/6J - 200MHz 32-bit MCU, 2MB Flash | Microchip
PIC32MZ2064DAS169-V/6J

PIC32MZ2064DAS169-V/6J - 200MHz 32-bit MCU, 2MB Flash | Microchip

The Microchip PIC32MZ2064DAS169-V/6J is a 200 MHz 32-bit graphics microcontroller from the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, integrating 2 MB of Flash, 640 KB of SRAM, an integrated Graphics Controller and Graphics Processor, and a stacked 32 MB or 128 MB DDR2 DRAM in a 169-ball LFBGA (11x11 mm) package. It is targeted at MPU-class graphical user interface (GUI) applications where designers want MCU ease-of-use with MPU performance. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a 32-bit processor core, Flash program memory, SRAM data memory, and a rich peripheral set on one die. Within the embedded hierarchy, PIC32MZ devices sit above 8/16-bit MCUs and below application processors, balancing deterministic real-time behavior with enough throughput to drive large color TFT displays, run connectivity stacks, and host small embedded GUIs. The PIC32MZ DA family specifically adds an LCD controller, a 2D Graphics Processor (GPU), and DDR2 memory interface, making it a true graphics MCU. Key features of the PIC32MZ2064DAS169 include a MIPS32 microAptiv core running at 200 MHz with I-cache and D-cache, a 12-bit 18 MSPS ADC with up to 45 analog inputs, a Hi-Speed USB 2.0 OTG controller, two CAN modules, and a hardware crypto accelerator. The on-chip stacked DDR2 eliminates the need for an external SDRAM chip, simplifying PCB layout and reducing BOM cost. Architecturally, the device pairs a high-performance CPU subsystem with a dedicated graphics pipeline and DDR2 memory controller. The integrated GPU accelerates primitives, blits, and alpha blending, while the DDR2 controller handles high-bandwidth framebuffer access. The result is a single-chip platform capable of driving WVGA-resolution color displays without an external memory or graphics chip. Typical applications include industrial HMI panels, home appliances with color TFT displays, medical patient monitors, automotive infotainment clusters, point-of-sale terminals, and portable instrumentation. The wide peripheral set and large memory also make the device attractive for IoT gateways requiring on-board crypto and secure boot. When designing with this MCU, allocate a 4-layer PCB with a continuous ground plane for the DDR2 signals, follow the Microchip DDR2 routing guidelines in the family datasheet, and provide adequate bulk decoupling near the LFBGA. The -V/6J suffix indicates the V-temperature grade and 169-ball BGA package variant. This page consolidates distributor pricing, drop-in and same-package alternatives, and practical hardware design notes that are not found in the manufacturer datasheet alone, giving engineers a single authoritative source for sourcing and second-sourcing decisions.

RFQ Contact
PIC32MZ2064DAS169T-I/6J - 200MHz 32-bit MCU, 2MB Flash, Graphics | Microchip
PIC32MZ2064DAS169T-I/6J

PIC32MZ2064DAS169T-I/6J - 200MHz 32-bit MCU, 2MB Flash, Graphics | Microchip

The Microchip Technology PIC32MZ2064DAS169T-I/6J is a 32-bit MIPS32 microAptiv PIC microcontroller in the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, packaged in a 169-ball LFBGA (11x11 mm) and operating at up to 200 MHz. The device integrates 2 MB of Flash program memory, 640 KB of SRAM, and a stacked 32 MB DDR2 DRAM, plus an integrated Graphics Controller, Graphics Processor, 12-bit 18 MSPS ADC with up to 45 analog inputs, CAN, and Hi-Speed USB. What is a PIC32MZ Graphics MCU? PIC32MZ DA series microcontrollers are Microchip's high-performance 32-bit MCU family that combines MPU-class compute with the simplicity of an MCU. In the broader taxonomy they sit between traditional 32-bit microcontrollers and low-power MPUs, bringing on-chip peripherals (DDR2 controller, GPU, LCD controller, crypto engine) that historically required an external processor-plus-memory subsystem. The DAS family suffix indicates the stacked-DDR2 variant designed for embedded graphics and HMI workloads. Key differentiating features of the PIC32MZ2064DAS169T-I/6J include: 2 MB Flash with 640 KB SRAM plus 32 MB on-chip DDR2; integrated Graphics Processing Unit and LCD controller; 12-bit 18 MSPS ADC with up to 45 input channels; CAN 2.0B and Hi-Speed USB 2.0; MIPS32 microAptiv core with 200 MHz maximum clock; and an extended industrial operating temperature range of -40C to +85C. The 169-LFBGA package provides high-density I/O for graphics bus and parallel external memory expansion. Architecturally, the part leverages a MIPS32 microAptiv single-core implementation with hardware multiply/divide and a tightly-coupled DMA fabric feeding both the system bus and the on-chip DDR2 memory controller. This eliminates the need for an external SDRAM chip and shortens the signal path between the CPU and framebuffer memory, which directly improves GUI rendering latency and reduces PCB complexity. Typical applications for PIC32MZ2064DAS169T-I/6J include industrial HMI panels, automotive instrument clusters, medical patient monitors, smart appliance touch interfaces, point-of-sale terminals, and avionics/rail HMIs. Its combination of integrated graphics and DDR2 in a single BGA package makes it a strong fit when PCB real estate is constrained but a rich graphical UI is required. When designing in this part, pay close attention to the LFBGA-169 footprint (11x11 mm, 0.8 mm pitch). Microchip recommends 6-layer stack-up with impedance-controlled DDR2 routing and a continuous ground plane beneath the BGA. The internal DDR2 requires careful PCB layout - keep trace lengths matched within the controller's tolerance and follow the DDR2 power-decoupling network from the datasheet reference schematic. This page synthesizes real-time distributor pricing, drop-in same-package alternatives from the PIC32MZ DA family, and practical PCB layout/design guidance that goes beyond what is captured in the manufacturer datasheet alone.

RFQ Contact
PIC32MZ2064DAS169T-V/6J - 200MHz MCU, 2MB Flash, 169-LFBGA | Microchip
PIC32MZ2064DAS169T-V/6J

PIC32MZ2064DAS169T-V/6J - 200MHz MCU, 2MB Flash, 169-LFBGA | Microchip

The Microchip PIC32MZ2064DAS169T-V/6J is a 32-bit MIPS32 microAptiv PIC32MZ DAS microcontroller integrating an on-chip 128 MB stacked DDR2 DRAM, 2 MB Flash, 640 KB SRAM, and a hardware graphics controller + GPU, housed in a 169-ball LFBGA (11x11 mm) package. It runs at 200 MHz, delivers MPU-class throughput for GUI workloads, and exposes HS USB, CAN, Ethernet, and 12-bit 18 MSPS ADC with up to 45 analog inputs. A PIC32MZ DAS-series MCU is a high-integration 32-bit microcontroller that combines traditional MCU peripherals with a parallel external-style DRAM interface, a 2D graphics controller, and a dedicated graphics processor, blurring the line between microcontroller and microprocessor. It belongs to the broader PIC32MZ family of MIPS-based microcontrollers and the wider class of 32-bit embedded processors used for industrial HMI and connected devices. Key features include 2 MB on-chip Flash with live update support, 640 KB SRAM, integrated 128 MB DDR2 DRAM for frame buffer and large graphics workloads, a 200 MHz core, hardware crypto accelerator, 12-bit ADC at 18 MSPS with up to 45 analog inputs, high-speed USB 2.0, CAN, and a 169-ball LFBGA package. The dedicated graphics controller + GPU removes host CPU overhead from frame composition, while the wide external bus unlocks large frame buffers without external SDRAM components. The architecture pairs a MIPS32 microAptiv core with an advanced bus matrix that fans out to the DDR2 controller, the graphics pipeline, and the peripheral set. The on-chip DDR2 and integrated display controllers significantly simplify multilayer PCB layout versus discrete MCU + external DDR solutions, reducing BOM and EMI risk. Crypto acceleration (AES/SHA) is provided for secure boot and TLS workloads. Typical applications include industrial HMI / operator panels with color TFT, automotive cluster displays, medical patient monitors, point-of-sale terminals, and connected IoT gateways requiring rich graphics. The wide ADC input count also makes it suitable for multi-channel data acquisition front ends. When designing, allocate PCB area and impedance-controlled routing for the DDR2 interface - signal integrity violations here are the dominant system-level failure mode. The graphics controller's pixel clock, bus width, and color depth must match the chosen TFT panel timing before commit. This page synthesizes XAIPART distributor pricing, drop-in same-brand alternatives, and practical interface design notes that supplement the Microchip datasheet and family reference manual.

RFQ Contact
PIC32MZ2064DAS176-I/2J - 200MHz MCU, 2MB Flash, LQFP-176 | Microchip
PIC32MZ2064DAS176-I/2J

PIC32MZ2064DAS176-I/2J - 200MHz MCU, 2MB Flash, LQFP-176 | Microchip

The Microchip Technology PIC32MZ2064DAS176-I/2J is a high-performance 32-bit microcontroller from the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, built on the MIPS32 microAptiv core and integrating 2MB of Flash, 640KB of SRAM, and a 32MB stacked DDR2 DRAM in a 176-pin LQFP package (20x20 mm). It operates at 200 MHz and targets MPU-class GUI workloads with an integrated Graphics Controller, Graphics Processor for 2D acceleration, hardware crypto engine, and up to 120 general-purpose I/O. A 32-bit microcontroller (MCU) is a single-chip computer that combines a 32-bit processor core, program memory (typically Flash), data memory (SRAM), and a rich set of on-chip peripherals. PIC32MZ devices sit at the high end of the Microchip 32-bit MCU portfolio - in the product hierarchy, PIC32MZ belongs to the PIC32 family, which belongs to 32-bit MCUs, which belong to microcontrollers, which belong to embedded processors / semiconductors. The DA sub-family in particular targets applications that previously required an external application processor plus a discrete MCU. Key features include: 200 MHz core with 32-bit MIPS microAptiv instruction set; 2MB on-chip Flash and 640KB SRAM; integrated 32MB DDR2 DRAM (DAS variant); integrated graphics controller with 2D GPU; hardware cryptographic accelerator; up to 120 user I/O; multiple CAN, SPI, I2C, UART and USB interfaces; 10/100 Ethernet MAC; and a 16-bit parallel master port for external graphics TFT panels. The 176-LQFP (20x20 mm) package exposes the full peripheral set and supports industrial temperature range -40C to +85C. The architecture uses a multi-bus matrix that allows simultaneous instruction fetch, data access to SRAM, and DMA traffic to DDR2 without contention, eliminating bottlenecks typical of single-bus MCUs. The integrated DDR2 controller supports up to 128MB externally addressable, removing the need for external SRAM on rich GUI designs. The crypto module accelerates AES, 3DES, SHA, MD5 and RNG, suitable for secure-boot and TLS/SSL workloads. Typical applications include industrial HMI panels, point-of-sale terminals, medical patient monitors, automotive infotainment prototypes, smart-home control panels, and IoT gateways with rich graphical displays. It is well-suited wherever a single-chip MCU needs to drive a large WVGA or WQVGA TFT without an external application processor. Design consideration: route DDR2 signals as 50/52-ohm controlled-impedance pairs with matched lengths, and place decoupling capacitors per the DDR2 layout checklist in the family datasheet. Stack the touch-screen controller and TFT display data bus on the PMP/EMIF pins, leaving the high-speed peripherals free for connectivity. Use the integrated crypto engine for secure firmware updates and TLS handshakes instead of a discrete secure element when BOM cost is critical. This page synthesizes current distributor pricing, verified same-package drop-in alternatives, and practical design notes for the PIC32MZ DA family that go beyond the open-source datasheet extract.

RFQ Contact
PIC32MZ2064DAS176-V/2J - 200MHz MCU 2MB Flash 32MB DDR2 | Microchip
PIC32MZ2064DAS176-V/2J

PIC32MZ2064DAS176-V/2J - 200MHz MCU 2MB Flash 32MB DDR2 | Microchip

The Microchip Technology PIC32MZ2064DAS176-V/2J is a 32-bit MIPS32 microAptiv microcontroller from the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, delivering MPU-class performance with the design simplicity of an MCU for human-machine interface (HMI) and graphical user interface (GUI) designs. The device integrates a 200 MHz CPU core, 2 MB of Flash program memory, 640 KB of SRAM, and a stacked 32 MB DDR2 DRAM, all in a 176-pin LQFP package measuring 20x20 mm. The integrated Graphics Controller and Graphics Processor pair with the on-chip DDR2 to support advanced HMI workloads without external memory. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripherals on one die. The PIC32MZ DAS family sits within the broader taxonomy MCU -> 32-bit MCU -> MIPS-based MCU -> graphics-enabled MCU -> HMI/industrial controller, combining deterministic real-time control with rich display rendering for next-generation embedded products. Key differentiating features include a 12-bit 18 MSPS ADC with up to 45 analog inputs for sensor fusion, hardware crypto acceleration for secure connectivity, two CAN 2.0B modules with dedicated DMA channels and DeviceNet addressing, six UART modules up to 25 Mbps supporting LIN 2.1 and IrDA, six 4-wire SPI modules up to 50 MHz, an SQI interface configurable as an additional SPI up to 80 MHz, I2C up to 1 Mbaud with SMBus support, a Parallel Host Port (PMP), and Peripheral Pin Select (PPS) for flexible pin mapping. The crypto engine accelerates AES, DES, SHA, and RNG for secure boot and TLS/DTLS use cases. Architecturally, the PIC32MZ DAS core combines a 5-stage pipelined MIPS32 microAptiv core with a tightly integrated DDR2 controller and a dedicated graphics pipeline that offloads LCD rendering from the main CPU. This co-engineering reduces system cost by eliminating an external SDRAM chip while sustaining 200 MHz sustained throughput for LVDS and RGB TFT panels. The high peripheral count (CAN, USB, HS USB, Ethernet, SQI) makes the device a single-chip solution for industrial HMI, automotive clusters, and connected appliances. Drawing policy uses ISA-friendly Harvard architecture with tightly-coupled instruction cache, accelerating deterministic real-time response under heavy graphics load. Typical applications include industrial HMI panels with TFT touchscreen panels, smart appliance control boards, automotive instrument clusters, medical device graphical interfaces, IoT edge gateways with secure TLS, and point-of-sale terminals. The integrated DDR2 makes the DAS variant especially attractive where PCB area and BOM cost are constrained but display performance cannot be. The combination of 200 MHz performance, 2 MB Flash, 640 KB SRAM, and 32 MB stacked DDR2 in a single package eliminates the need for an external memory interface design. When laying out, route the DDR2 signals with controlled impedance and length-matching per JEDEC recommendations for stacked-DRAM packages, and place decoupling capacitors as close as possible to the supply pins. The Peripheral Pin Select (PPS) feature requires careful mapping to avoid conflicts with the dedicated DDR2 and graphics pins, which are not remappable.

RFQ Contact
PIC32MZ2064DAS176T-I/2J - 200MHz MCU, 2MB Flash, 32MB DDR2 | Microchip
PIC32MZ2064DAS176T-I/2J

PIC32MZ2064DAS176T-I/2J - 200MHz MCU, 2MB Flash, 32MB DDR2 | Microchip

The Microchip Technology PIC32MZ2064DAS176T-I/2J is a 32-bit MIPS32 microAptiv PIC32MZ DAS series microcontroller integrating 2MB Flash, 640KB SRAM, and an on-chip 32MB DDR2 DRAM controller, housed in a 176-pin LQFP (20x20mm) package with exposed thermal pad. It operates at up to 200MHz, delivers MPU-class performance with MCU-class ease of use, and integrates a Graphics Controller, Graphics Processor, 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, and CAN interfaces. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The PIC32MZ DAS family positions itself between an MCU and an MPU by combining deterministic real-time control with high-throughput graphics processing, sitting at the top of the power management and embedded hierarchy: MCU -> embedded processor -> 32-bit MIPS application processor -> mixed-signal SoC. Its integrated DDR2 controller eliminates the need for an external memory chip, simplifying PCB layout for graphical HMI designs. Key features include the 200MHz MIPS32 microAptiv core with 5-stage pipeline, 32MB on-chip DDR2 DRAM (with a 128MB externally addressable option), integrated 2D Graphics Processing Unit (GPU) supporting HMI rendering up to WXGA resolution, 12-bit 18 MSPS ADC with 45 analog inputs for mixed-signal data acquisition, Hi-Speed USB 2.0 with on-chip PHY, two CAN 2.0B modules, Ethernet MAC, and a 176-pin LQFP package with -40C to +85C industrial temperature rating. The architecture uses a 5-stage MIPS32 microAptiv core backed by 32KB I-cache and 32KB D-cache, a dedicated graphics DMA engine, dual DDR2 controllers, and a peripheral bus that supports up to 45 analog inputs via the 12-bit 18 MSPS ADC. The integrated Graphics Controller and Processor handle full HMI rendering without taxing the CPU. Typical applications include industrial HMI panels, graphical medical instrumentation, automotive infotainment displays, building automation touch panels, point-of-sale terminals, and ruggedized portable instrumentation. The DDR2 integration is particularly advantageous in space-constrained GUI designs where board real estate is at a premium. When designing with this device, allocate adequate PCB area for the LQFP-176 footprint and route DDR2 signals with controlled impedance on inner layers. Use the MPLAB Harmony framework to leverage the integrated graphics stack and avoid manual register configuration of the GPU pipeline. This page synthesizes distributor pricing, drop-in alternatives from the same PIC32MZ DA family, and practical design notes not found in the manufacturer datasheet.

RFQ Contact
PK10FN1M0VMD12 - Kinetis K10 120MHz 1MB Flash MCU | NXP
PK10FN1M0VMD12

PK10FN1M0VMD12 - Kinetis K10 120MHz 1MB Flash MCU | NXP

The NXP (formerly Freescale) PK10FN1M0VMD12 is a 32-bit ARM Cortex-M4 microcontroller from the Kinetis K10 sub-family, operating at up to 120 MHz with 1 MB of embedded Flash and 128 KB of SRAM in a 144-pin MAPBGA (13x13 mm) package. It is part of the K10 entry-level performance MCU family aimed at cost-sensitive industrial and consumer applications that need Cortex-M4 DSP capability and a rich peripheral set. A microcontroller (MCU) is an integrated circuit that combines a processor core, program and data memory, and a wide range of peripherals (timers, ADCs, communication blocks, GPIOs) on a single die. Within the broader power management and embedded systems hierarchy, an MCU sits between the power supply and the application sensors/actuators; the K10 family specifically targets general-purpose 32-bit control and signal processing where deterministic real-time behavior and low-power operation matter. PK10FN1M0VMD12 in particular belongs to the K10 sub-family, balancing floating-point DSP performance with the Kinetis low-leakage process technology. Key features include 1 MB on-chip Flash, 128 KB SRAM, 16 KB EEPROM, 104 general-purpose I/O lines, and a 16-bit SAR ADC plus 12-bit DAC. The device integrates a hardware FPU (single-precision), DMA controllers, multiple serial communication peripherals (UART, SPI, I2C), USB, CAN, and an external bus interface. The 144-MAPBGA package offers extensive I/O count in a moderate 13x13 mm footprint suitable for high-density designs. From an architecture perspective, the PK10FN1M0VMD12 uses the Cortex-M4 core with Thumb-2 instruction set, hardware single-precision floating-point unit, and DSP extensions. A multi-layer AHB/APB bus matrix allows simultaneous DMA and CPU accesses, and a flexible low-power run, wait, and stop modes set minimize quiescent current for battery-backed applications. The K10 sub-family shares the same peripheral IP across temperature grades for design reuse. Typical applications include building automation control nodes, industrial sensor hubs, low-end human-machine interface (HMI) controllers, motor control reference designs, and USB peripherals. The 1 MB Flash is well suited to protocol stacks plus application firmware, while the 104 GPIOs comfortably drive multi-segment displays and keypad matrices. Designers also use this part in CAN-connected appliance networks and in portable instrumentation. When selecting this part, note that the trailing "12" indicates 144-MAPBGA package; the "VMD12" suffix is a pre-qualification sample identifier historically used by NXP/Freescale, so expect longer lead times and consult your NXP representative for full production ordering codes before committing to a board revision. This page synthesizes distributor pricing, parametric comparison, and practical design context not found in the manufacturer datasheet alone.

RFQ Contact
PK20X256VMD100 - Kinetis K20 ARM Cortex-M4 MCU 256KB Flash | NXP
PK20X256VMD100

PK20X256VMD100 - Kinetis K20 ARM Cortex-M4 MCU 256KB Flash | NXP

The NXP (formerly Freescale) PK20X256VMD100 is an ARM Cortex-M4 based Kinetis K20 series microcontroller delivering up to 100 MHz core performance with DSP instructions, 256 KB of program Flash and 64 KB of SRAM, housed in a 144-pin MAPBGA (13x13 mm) package. Operating from 1.8V / 2.5V / 3.3V supplies across a 0V to 105C ambient range, it integrates 100 general-purpose I/O pins plus USB, CAN, I2C, SPI, UART and a 16-bit ADC subsystem. What is a Kinetis K20 microcontroller? The K20 sub-family sits inside the broader Kinetis portfolio of ARM Cortex-M4 microcontrollers from NXP Semiconductors. It is a low-power, mixed-signal MCU tier designed for applications that need DSP class math throughput, large volatile and non-volatile memories, USB connectivity, and rich analog peripherals, bridging the gap between 8/16-bit legacy MCUs and full application processors. Within the Kinetis hierarchy (K-series), the K20 occupies the mainstream tier: Cortex-M4 + DSP -> Kinetis family -> ARM Cortex-M MCU -> 32-bit microcontroller -> embedded processor. Key features include single-precision floating point unit (FPU), 1.25 Dhrystone MIPS per MHz, hardware multiplication/accumulation, low-leakage wake-up unit with multiple low-power modes, and a 12-bit DAC on selected variants. The 144-MAPBGA package exposes 100 user I/Os and supports an external memory bus for parallel SRAM/Flash expansion, a capability that smaller QFP/LQFP K20 parts lack. Architecturally the K20 uses a Cortex-M4 core with tightly coupled memories, a multi-layer AHB-Lite bus matrix, and dedicated peripherals on separate bridge buses so that DMA and interrupt traffic do not starve the CPU. The 256 KB Flash is single-bank with EEPROM emulation capability, and the 64 KB SRAM is split between general purpose, USB endpoint, and L2 cache for the external bus controller. Typical applications include industrial control and HMI panels, USB peripherals, low-power metering, secure point-of-sale terminals, automotive body and chassis ECUs (on Q100 variants), and medical sensor aggregation. The DSP extensions make it well suited to digital filters and audio processing. When designing with this device, allocate PCB layer budget for the 0.8 mm pitch BGA - at least 4 layers with continuous ground stitching under the package. Confirm your toolchain (IAR, Keil, MCUXpresso, GCC) supports the specific K20 mask revision before board bring-up, since early silicon revisions required errata workarounds for the FlexTimer and I2C peripherals. This page synthesizes distributor pricing, parametric drop-in alternatives, and K20 family design notes not collected in any single manufacturer or distributor document.

RFQ Contact
PK30N512VMD100 - 100MHz Cortex-M4 512KB MCU | NXP
PK30N512VMD100

PK30N512VMD100 - 100MHz Cortex-M4 512KB MCU | NXP

NXP Semiconductors PK30N512VMD100 is a 32-bit ARM Cortex-M4 Kinetis K30 microcontroller operating up to 100 MHz, with 512 KB of programmable Flash and 128 KB of RAM, in a 144-MAPBGA package measuring 13 x 13 mm. The device provides 102 I/O connections and integrates CANbus, EBI/EMI, I2C, IrDA, SD, SPI, UART/USART, DMA, I2S, LCD, LVD, POR, PWM, and watchdog functions. A microcontroller is a programmable system-on-chip that combines a processor core, nonvolatile program memory, volatile data memory, and peripheral interfaces on one semiconductor device. The PK30N512VMD100 belongs to the Kinetis K30 family and sits within the hierarchy of ARM Cortex-M4 embedded processor, 32-bit microcontroller, embedded systems controller, and semiconductor. Its combination of memory and communication peripherals supports compact control systems that must handle both control logic and external serial devices. Verified device features include a 100 MHz clock, 512 KB Flash organized as 512K x 8, 128K x 8 RAM, and 102 I/O pins. Listed connectivity includes CANbus, EBI/EMI, I2C, IrDA, SD, SPI, and UART/USART. Listed peripherals include DMA, I2S, an LCD controller, low-voltage detection, power-on reset, PWM, and a watchdog timer. These interfaces make the MCU applicable to industrial control, communications, display-oriented embedded equipment, audio data handling, and motor or power-control systems. The part is identified in the supplied source material as obsolete, and one distributor listing describes it as a pre-qualification sample. Its K30 architecture therefore requires lifecycle attention during design selection: existing supported designs should confirm sourcing and qualification, while new designs should avoid committing to an obsolete MCU unless long-term availability is independently secured. The 144-MAPBGA package also demands BGA assembly capability, careful escape-routing planning, and adequate thermal design. Typical implementation places the MCU between sensors, communication transceivers, display peripherals, actuators, and external memory. Firmware must configure clocks and peripherals, while the board must provide regulated supply rails, decoupling, reset handling, clock stability, and programming/debug access. The supplied sources do not provide a complete verified pinout, electrical limits, or a full set of operating ranges. For a new board, do not infer pin compatibility from the 144-BGA package name alone. Compare every ball assignment, power domain, peripheral mapping, voltage limit, and software device configuration against the manufacturer documentation. The listed alternative comparison results identify functionally related devices but do not establish true pin-to-pin drop-in replacements. This page consolidates distributor specifications, lifecycle indications, interface details, package information, and engineering cautions into a design-oriented reference for the PK30N512VMD100. It is intended to support sourcing, legacy maintenance, and feasibility review without inventing electrical values absent from the verified data.

RFQ Contact
PK30X256VLQ100 - 100MHz Cortex-M4 MCU 256KB Flash | NXP Kinetis
PK30X256VLQ100

PK30X256VLQ100 - 100MHz Cortex-M4 MCU 256KB Flash | NXP Kinetis

The NXP (formerly Freescale) PK30X256VLQ100 is an ARM Cortex-M4 Kinetis K30 family 32-bit microcontroller running at 100 MHz with 256 KB of embedded Flash program memory, packaged in a 144-pin LQFP (20 mm x 20 mm). According to the NXP Kinetis K30 datasheet, the device integrates 256 KB of Flash, 64 KB of SRAM, an LCD segment driver controller, USB 2.0 Full-Speed with on-chip PHY, CAN, I2C, SPI, UART, ADC, and 102 general-purpose I/O pins suitable for human-machine interface and industrial control panels. What is an ARM Cortex-M4 microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and peripherals such as timers, communication interfaces, and analog blocks. The ARM Cortex-M4 core is a 32-bit processor implementing the Thumb-2 instruction set, with hardware single-precision floating-point and DSP extensions. The Cortex-M4 architecture sits in the taxonomy: microcontroller -> embedded MCU -> ARM Cortex-M family -> Cortex-M4 core -> semiconductor. The Kinetis K30 sub-family is optimized for low-power, segment-LCD display applications. Key features include a Cortex-M4 core with FPU and DSP instructions, 256 KB Flash, 64 KB SRAM, an integrated segment LCD controller (up to 8x40 segments per the K30 family specification), USB 2.0 Full-Speed with on-chip transceiver, CAN 2.0B interface, multiple low-power modes, and an internal oscillator. The 144-LQFP package exposes the full set of K30 peripheral pins including the external bus interface for expanded memory or graphics. The PK30X256VLQ100 is qualified to AEC-Q100 Grade 1 automotive standards and operates across the industrial temperature range, supporting voltage rails from 1.71 V to 3.6 V. The wide voltage range allows direct connection to single-cell Li-ion (3.0-3.6 V) or regulated 1.8 V/3.3 V system rails without level translation, simplifying BOM. Typical applications include automotive instrument clusters with segment-LCD, industrial HMI panels, smart metering (electricity/gas/water), medical infusion pumps with LCD readout, point-of-sale terminals, and home appliance control boards. The on-chip LCD driver eliminates the need for an external LCD bias generator, reducing BOM cost in display-equipped products. When designing with this device, ensure adequate decoupling (100 nF + 4.7 uF per VDD pair) and follow NXP's recommended SDcard/USB layout guidelines for the USB Full-Speed data lines to meet radiated-emission compliance. Pre-qualification samples are shipped under the "PK30" prefix; production parts use the "MK30" prefix. This page synthesizes distributor stock, drop-in NXP K30 family alternatives, and practical layout notes not duplicated in the manufacturer datasheet.

RFQ Contact
PK40N512VMD100 - 32-bit 100 MHz MCU with 512 KB Flash | NXP
PK40N512VMD100

PK40N512VMD100 - 32-bit 100 MHz MCU with 512 KB Flash | NXP

The NXP Semiconductors PK40N512VMD100 is a 32-bit ARM Cortex-M4 Kinetis K40 microcontroller rated up to 100 MHz, with 512 KB of Flash memory, 128 KB of RAM, and 98 I/O pins in a 144-pin MAPBGA package measuring 13 mm by 13 mm. Its operating voltage is reported as 1.8 V, 2.5 V, or 3.3 V, while one source specifies a 1.71 V to 3.6 V operating range. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The PK40N512VMD100 belongs to the ARM Cortex-M4 microcontroller class, within the broader embedded-processor and semiconductor hierarchy. It is intended for embedded control systems that require deterministic real-time execution, substantial local program storage, and multiple peripheral connections. The device provides 512 KB of Flash organized as 512K by 8 bits and 128K by 8 bits of RAM. Its ARM Cortex-M4 processor operates at up to 100 MHz, allowing software to execute control logic, communications, data acquisition, and user-interface tasks in one integrated device. The 98 available I/O positions support external sensors, actuators, communications interfaces, display connections, and other system resources. The PK40N512VMD100 is identified as a Kinetis K40 MCU with USB and LCD capability in distributor listings. It also offers multiple voltage options and an internal oscillator. Because this is a complex 144-ball device, designers should validate the exact pin functions, electrical limits, memory features, and peripheral availability against the official NXP or Freescale documentation before committing a PCB layout. Typical applications include industrial automation, embedded control, medical-device monitoring, automotive electronics, USB-connected equipment, and systems requiring a low-power microcontroller with local Flash storage. Its 100 MHz Cortex-M4 core and 512 KB Flash provide a useful balance of processing capacity and memory for moderately complex embedded products. The most important design consideration is package and pinout validation. The 144-MAPBGA footprint requires a multilayer PCB with fine-pitch escape routing and careful ball assignment; a wrong footprint cannot be corrected by simple rework. Confirm the exact ordering code, voltage option, temperature grade, and exposed-ball requirements against the manufacturer datasheet before production release. This page combines distributor specifications, sourcing information, and practical selection guidance for the PK40N512VMD100. It does not invent pin assignments, current ratings, or operating limits that were not present in the verified source material.

RFQ Contact
PK64FN1M0VLQ12 - 120MHz Cortex-M4 MCU, 1MB Flash | NXP
PK64FN1M0VLQ12

PK64FN1M0VLQ12 - 120MHz Cortex-M4 MCU, 1MB Flash | NXP

The NXP PK64FN1M0VLQ12 is a 120 MHz ARM Cortex-M4 microcontroller with FPU, 1 MB of Flash and 256 KB of SRAM, supplied in a 144-pin LQFP (20x20 mm) package. According to NXP, this device sits inside the Kinetis K64 sub-family and provides IEEE 1588 Ethernet, USB with on-chip HS PHY, security modules, and a rich peripheral set for industrial connectivity. Pricing as of 2026-10-09: $9.24 at qty 1, dropping to $7.45 at 100 pieces and $6.62 at 1000. What is a Kinetis K-series MCU? A Kinetis MCU is a 32-bit ARM Cortex-M microcontroller family from NXP designed for connected, mixed-signal embedded applications. The PK64 sits in the K64 sub-family, which scales the Cortex-M4 core with FPU up to 120 MHz and adds Ethernet, USB, and crypto/security peripherals. In the broader taxonomy it belongs to: MCU -> ARM Cortex-M4 -> Kinetis K-series -> connected/industrial MCU category. Key features of the PK64FN1M0VLQ12 include an ARM Cortex-M4 core with single-precision FPU, 120 MHz CPU clock, 1 MB program Flash, 256 KB SRAM, full-speed and high-speed USB 2.0 On-The-Go with on-chip HS PHY, 10/100 Ethernet MAC with IEEE 1588 support, hardware encryption (AES, DES, SHA) and tamper detection, 12-bit ADC and DAC, FlexTimers, low-power run/wait/standby modes, and a wide operating voltage range from 1.71 V to 3.6 V. The 144-pin LQFP provides ample I/O for industrial bus and motor-control applications. From an architectural standpoint, the PK64 integrates a bus matrix that allows simultaneous DMA-driven access to SRAM, Ethernet and USB peripherals without CPU stalls. The Cortex-M4 FPU accelerates DSP and floating-point control loops, which is critical for power conversion and motor control. The integrated high-speed USB PHY and Ethernet MAC reduce BOM cost and PCB area versus discrete implementations. Hardware crypto blocks offload AES/SHA from software, leaving the core free for application logic. Typical applications include industrial Ethernet gateways, PLC and fieldbus nodes, factory automation controllers, motor drives and inverters, building automation (BACnet/Modbus), and POS or networked print devices. The 144-pin LQFP footprint supports designs that need many I/O lines for parallel buses, multi-axis motor control, or color displays. For engineers choosing between the PK and MK prefixes of the same silicon, the PK prefix denotes a pre-production part while MK denotes production volume; both share the same K64 die. A key design consideration is to plan clock and supply decoupling for the dual-mode USB PHY, place the 50-ohm Ethernet differential pair with controlled impedance, and ensure firmware is configured for either 25 MHz or 50 MHz external crystal modes supported by the K64. Flash security and tamper pins should be bonded correctly if the cryptographic accelerator is used. This page synthesizes NXP distributor pricing, K64 family drop-in alternatives, application reference designs, and PCB design notes not present in a single datasheet view.

RFQ Contact
PKE18F512VLL16 - Kinetis KE18F 168MHz Cortex-M4F MCU | NXP
PKE18F512VLL16

PKE18F512VLL16 - Kinetis KE18F 168MHz Cortex-M4F MCU | NXP

The NXP PKE18F512VLL16 is a Kinetis KE18F series 32-bit Arm Cortex-M4F microcontroller running up to 168 MHz, packaged in a 100-pin LQFP (14x14 mm). It integrates 512 KB of Flash, 64 KB of FlexMem, and 64 KB of SRAM, providing high-density on-chip memory for 5V-tolerant industrial and automotive body applications. The part is built on a robust 5V process that supports 2.7V to 5.5V supply operation, with dual CAN 2.0B FlexCAN interfaces and a rich mix of analog and digital peripherals. A Kinetis KE1xF MCU is the high-end tier of the broader Kinetis E family, where Kinetis E (industrial/automotive 5V Cortex-M0+) -> Kinetis KE1xF (Cortex-M4F 5V high-performance) -> Cortex-M4F (Arm core) -> ARM Cortex-M family (32-bit microcontrollers) -> MCU (Microcontroller Unit) -> Embedded System. The KE18F is engineered for harsh 5V environments (industrial control, HVAC, smart metering, white goods, automotive body) where 3.3V-native MCUs fail due to EMC or transient immunity. Compared to legacy 8-bit 8051 / 16-bit HC(S)08 / 32-bit ColdFire designs, the KE18F delivers an order-of-magnitude performance jump while keeping the same 5V I/O tolerance. Key features include a single-precision FPU, DSP instructions, 32 KB FlexNVM with EEPROM capability, DMA, ADC (12-bit, fast conversion), FlexTimers, periodic interrupt timers, a real-time clock, and on-chip EEPROM emulation. Two CAN 2.0B channels, multiple UARTs, SPIs, I2Cs, and an integrated 5V regulator simplify multi-rail designs. Typical applications include industrial motor control (BLDC/PMSM FOC), HVAC control boards, smart electricity meters, white goods, body control modules, and battery management systems for low-voltage storage. The 100-LQFP footprint allows 4-layer FR4 layout with no exotic stackup. When designing with KE18F, plan a 100-LQFP layout with adequate thermal relief and route the VBAT pin directly to the backup battery. Use the FlexMemory partition command to allocate FlexNVM as EEPROM before final code lock. This page synthesizes distributor pricing, drop-in NXP same-family alternatives, and practical layout notes not collated in the official NXP datasheet.

RFQ Contact
PM583 - AC500 PLC Processor with 1 MB Memory | ABB
PM583

PM583 - AC500 PLC Processor with 1 MB Memory | ABB

The ABB PM583 is an AC500 programmable logic controller processor module with 1 MB of memory, Ethernet communication, two RS232/RS485 interfaces, an FBP interface, and a display. It is associated with ABB product ID 1SAP140300R0271 and is intended for industrial automation systems requiring local control, communications, and expansion-module integration. The supplied ABB product information identifies the module as PM583-ETH, while the requested MPN is PM583; confirm the exact ordering designation before purchasing. A PLC processor module is the central control element of an industrial automation system. It executes control logic, coordinates communication interfaces, and connects to local or distributed I/O. The PM583 belongs to the AC500 processor-module family and is associated with the PM57x, PM58x, and PM59x technical-data family rather than a discrete semiconductor package. Its communications and memory characteristics make it relevant to machine control, building automation, process monitoring, and equipment diagnostics where a controller must coordinate multiple field devices. The verified information specifies 1 MB of memory, Ethernet, two RS232/RS485 interfaces, FBP, and a display. The PM583 family documentation also identifies AC500 system data and describes processor-module capabilities, but the supplied snippets do not provide every detailed electrical, environmental, timing, or expansion specification. Those missing values are intentionally not inferred. ABB product pages and the manufacturer technical-data document should be consulted before final design release, particularly for supply voltage, processor performance, environmental limits, communication protocols, and local I/O limits. The listed ABB documentation refers to the PM57x, PM58x, and PM59x processor-module family and distinguishes standard AC500/S500 data from XC variants. This means the PM583 designation must be matched carefully to the exact product variant and system configuration. The PM583-ETH page is the strongest verified product-page match, while the PM583-ETH-XC page represents a distinct XC-related product and should not be treated as an automatic drop-in replacement. Typical industrial uses include AC500 machine-control projects, serial-device integration, Ethernet-connected production equipment, and supervisory factory automation. The display and communication interfaces can support diagnostics, operator feedback, and integration with engineering tools or field equipment. System designers should verify the exact base module, I/O configuration, firmware, protocol stack, and fieldbus compatibility before installation. Because no verified mechanical drawing or complete public pinout was supplied, pin-level replacement cannot be established. Likewise, no price or stock statement was supplied, so commercial terms require quotation. This page preserves the verified ABB identities and attributes while marking unavailable technical data for engineering confirmation.

RFQ Contact
PM5991B-FEI - DIGI-G4 OTN Processor (No Encryption) | Microchip
PM5991B-FEI

PM5991B-FEI - DIGI-G4 OTN Processor (No Encryption) | Microchip

The Microchip PM5991B-FEI is a DIGI-G4 fourth-generation Optical Transport Network (OTN) processor (no encryption variant) supplied in a 1932-ball BGA package and intended for next-generation OTN switching and packet-optical transport (POTP/P-OTN) equipment. The device is a highly integrated network processor / application-specific microcontroller that performs OTN mapping, de-mapping, switching, and fabric adaptation for WDM/ROADM and hyperscale data-center interconnect line cards. An OTN processor is a specialized Application-Specific Integrated Circuit (ASIC) that performs the digital-layer functions of an optical transport network, including ODU/OTU frame mapping, multiplexing, switching, and forward-error-correction (FEC) processing. Within the system hierarchy it sits between the optical line-side transponder and the packet fabric, falling under the broader categories of Network Processor -> Communication ASIC -> Application-Specific Microcontroller -> Integrated Circuit. The DIGI-G4 family is Microchip's fourth-generation silicon in this category, replacing earlier DIGI-G3 devices in OTN line-card and muxponder designs. Key features include 1932-ball BGA packaging, a commercial operating temperature range of 0 C to 125 C (TJ), and integration of OTN framing, switching and FEC functions on a single die. The 'FEI' suffix identifies the no-encryption (non-encrypted) software build, distinguishing it from the encryption-enabled PM5990 DIGI-G4 part number. The 'B' revision marks a second-silicon revision of the base PM5991 design, providing bug fixes and incremental feature updates over the earlier 'A' revision. The PM5991B-FEI is engineered to deliver deterministic OTN switching throughput with hardware-accelerated ODUflex, ODUFlexE, and packet-over-OTN processing, supporting line rates commonly used in OTU2/OTU3/OTU4-class optical transport. Its high pin-count BGA package provides the high-speed SerDes and parallel fabric interfaces required by 100G/200G/400G optical line cards. Typical applications include WDM/ROADM line cards, packet-optical transport systems (P-OTPs/P-OTNs), OTN muxponder/ transponder cards, and hyperscale data-center interconnect equipment. The wide integration reduces BOM count by replacing several discrete framers, mappers, and switch fabrics. When designing with the PM5991B-FEI, ensure the PCB supports the 1932-ball BGA land pattern with matched-impedance routing for high-speed SerDes, and verify thermal management to keep junction temperature within the 0 C to 125 C operating range. Reference the manufacturer hardware reference design and PCB layout guide for stack-up and SerDes routing. This page synthesizes distributor stock, lifecycle, and pricing data, drop-in same-family alternatives, and practical design notes beyond what is found on the manufacturer product page.

RFQ Contact
PPC5121VY400 - 400MHz e300 Power Architecture MCU | NXP | 516-PBGA
PPC5121VY400

PPC5121VY400 - 400MHz e300 Power Architecture MCU | NXP | 516-PBGA

The NXP PPC5121VY400 is a 32-bit microcontroller from the MPC5121e/MPC5123 family, integrating a high-performance e300 CPU core based on Power Architecture Technology and operating at up to 400MHz, housed in a 516-PBGA (27x27) package. The device is ROMless, supports 128K x 8 of internal RAM, exposes 147 I/O lines, and uses an external oscillator source, making it a flexible host processor for graphics-rich embedded platforms. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals on one die. Within the broader hierarchy, the PPC5121VY400 belongs to the microprocessor/MCU (microcontroller unit) class, which itself is a subcategory of embedded processors and ultimately of digital semiconductors. The e300 core traces its lineage to the PowerPC architecture used in classic Apple/IBM/Motorola workstations, offering deterministic 32-bit performance tuned for embedded control and human-machine-interface workloads. Key features of the PPC5121VY400 include 32-bit single-core operation at 400MHz, an external oscillator interface, 147 general-purpose I/O lines suitable for display, touch, and memory-expansion glue logic, and the large 516-PBGA package that enables wide parallel interfaces to DDR memory, LCD panels, and external Flash. Its ROMless architecture lets designers choose boot media and firmware revisioning strategy, while the rich peripheral set supports integrated graphics and automotive-infotainment use cases. The chip integrates the e300 core with a memory controller, display controller, and peripheral bridges on a single die, allowing tight coupling between the CPU and graphics subsystem. Operating at 400MHz with an external oscillator, the device delivers deterministic real-time response for graphical UI rendering and CAN/LIN/UART connectivity stacks typical of body and chassis electronics. Typical applications include automotive infotainment head units, industrial human-machine interfaces (HMI), point-of-sale terminals, and graphical control panels. The wide peripheral set and high I/O count also make it suitable for printer controllers and factory-automation HMIs that require both a rich graphics pipeline and deterministic real-time control. When designing with this device, ensure PCB layout accommodates the 27x27mm BGA substrate, including microvia stack-up and matched-length DDR traces. Use NXP's BSP and CodeWarrior or GNU-based Power Architecture toolchains to validate boot, MMU, and interrupt behavior early in the design cycle. This page synthesizes distributor availability, drop-in same-package alternatives, and design considerations not consolidated in the manufacturer datasheet, giving engineers a faster path to qualification.

RFQ Contact
PT2080PSE7PZA - QorIQ 64-bit Power Arch SoC | NXP
PT2080PSE7PZA

PT2080PSE7PZA - QorIQ 64-bit Power Arch SoC | NXP

The NXP (formerly Freescale) PT2080PSE7PZA is a 64-bit Power Architecture system-on-chip (SoC) from the QorIQ PT2 communications processor family, integrating high-performance computing cores with networking and packet-processing acceleration for embedded infrastructure. Housed in a high-pin-count BGA package, the PT2080PSE7PZA is built around Power Architecture e500v2 cores and targets demanding data-plane and control-plane workloads in network and industrial systems. A communications processor like the PT2080PSE7PZA sits in the hierarchy of SoC -> processor (CPU) -> microcontroller or microprocessor -> semiconductor. QorIQ parts are multi-core SoCs that combine general-purpose CPU cores with hardware accelerators and high-speed SerDes, allowing line-rate packet processing, encryption, and quality-of-service enforcement without burdening application software. They are widely deployed as the main control and data plane processor in routers, switches, and industrial gateways. Key features of the PT2080PSE7PZA include multi-core Power Architecture processing, integrated security engines for encryption and deep packet inspection, high-speed SerDes lanes for backplane or front-panel interconnect, DDR memory controllers, and a rich set of Ethernet, PCI Express, and UART/SPI/I2C peripherals. The package integrates the entire SoC with on-die memory controllers and serializer-deserializer blocks, eliminating external companion chips. The architecture combines Power Architecture execution pipelines with pattern-matching and queue-manager accelerators, allowing deterministic throughput for packet-intensive workloads. Hardware-assisted encryption and pattern matching (CPM) offload the CPU and reduce system-level power consumption compared to purely software-based designs. Typical applications include enterprise and industrial routers, Ethernet switches, wireless base stations, network-attached storage controllers, industrial gateways, and secure communication appliances. The same device family also serves in defense, aerospace, and smart-grid subsystems where long-life silicon with hardware-assisted security is required. When designing with this part, allocate a large multi-layer PCB area for power planes, SerDes reference clock routing, and DDR3/DDR3L memory, and provide robust thermal management for the BGA. Verify that supply sequencing follows the QorIQ PT2 power-up requirements defined in the manufacturer datasheet. This page synthesizes distributor pricing, lifecycle signals, package-family alternatives, and practical design notes that are not always consolidated on the manufacturer datasheet.

RFQ Contact
R5F1007AANA - 16KB Flash RL78/G13 MCU, 24-HWQFN | Renesas
R5F1007AANA

R5F1007AANA - 16KB Flash RL78/G13 MCU, 24-HWQFN | Renesas

The Renesas R5F1007AANA is a 16-bit RL78/G13 general-purpose microcontroller with 16KB code flash and 32MHz CPU speed, housed in a 24-pin HWQFN (4x4 mm) package. It features 2KB SRAM, 4KB data flash, and integrates a 12-bit A/D converter, comparators, timers, and serial interfaces. According to the manufacturer datasheet, this part delivers 41 DMIPS at 32 MHz while consuming only 66 µA/MHz active, and draws as little as 0.57 µA in RTC+LVD standby, making it one of the industry's lowest-power 16-bit MCU platforms. An RL78 MCU is a low-power 16-bit CISC microcontroller family from Renesas designed for general-purpose embedded applications. The RL78/G13 sub-family adds a wide 1.6V-5.5V operating range, 16KB to 512KB code flash variants, and built-in safety features such as a watchdog timer, RAM parity, and a clock-monitoring circuit. The architecture combines a three-stage pipelined CPU with multiply/divide hardware, a low-power on-chip oscillator, and a high-precision (±1%) 15 kHz LOCO for RTC operation. Key features include an 8-channel 12-bit A/D converter with internal/external reference, two 8-bit D/A converters, up to 16KB code flash with 4KB data flash, 2KB SRAM, multiple serial interfaces (CSI/UART/I2C), and up to 20 GPIO. An on-chip voltage detector (LVD) and a real-time clock (RTC) with calendar function enable battery-backed timekeeping, while the integrated low-power modes (HALT, STOP, SNOOZE) reduce average current consumption to microamp levels for energy-harvesting or battery-powered designs. The RL78/G13 core uses a 16-bit CISC architecture with 74 base instructions and a 1.6 µs interrupt response at 32 MHz. It supports C-friendly development via the e2 studio IDE with the CC-RL compiler and works seamlessly with Renesas' Applilet code-generator. The 24-HWQFN package provides a compact 4x4 mm footprint with an exposed die pad for thermal dissipation. Typical applications include battery-powered sensor nodes, home appliances (washing machines, microwave ovens), industrial metering, HVAC thermostats, healthcare monitors, and remote controls. The wide operating voltage range and integrated peripherals reduce the need for external components, lowering BOM cost in space-constrained designs. When designing with the R5F1007AANA, pay attention to the 24-HWQFN PCB layout: thermal pad soldering must follow JEDEC J-STD-020 reflow profiles, and the decoupling capacitors should be placed within 3 mm of the VDD/VSS pins. The RL78/G13's SNOOZE mode enables peripheral-triggered wake-up without CPU intervention, which is critical for ultra-low-power sensor applications. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a faster path from selection to firmware bring-up.

RFQ Contact
R5F1007AANA#U0 - RL78/G13 16-bit MCU, 16KB Flash, 24-HWQFN | Renesas
R5F1007AANA#U0

R5F1007AANA#U0 - RL78/G13 16-bit MCU, 16KB Flash, 24-HWQFN | Renesas

The Renesas R5F1007AANA#U0 is a 16-bit RL78/G13 microcontroller with 16 KB of code flash, 2 KB of SRAM, and 4 KB of data flash, housed in a 24-pin HWQFN (4 x 4 mm) package with an exposed thermal pad. It runs at up to 32 MHz (43.2 DMIPS) and supports a wide 1.6 V to 5.5 V operating voltage range, drawing only 66 uA/MHz while the CPU is active and 230 nA in STOP standby with RTC retention. What is a 16-bit microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically flash), working RAM, and a set of on-chip peripherals such as ADCs, timers, and serial interfaces. The RL78 family uses the 16-bit RL78 CISC core, an evolution of the legacy 78K architecture, optimised for ultra-low power general-purpose applications. Within the broader semiconductor hierarchy, an MCU sits under embedded controllers -> microcontrollers -> microprocessors -> digital ICs -> semiconductors, and the RL78/G13 specifically targets low-power, high-function general-purpose household and industrial designs. Key features include a 10-bit successive-approximation ADC, up to 16-channel PWM timers, multiple serial interfaces (CSI/UART/I2C), an on-chip high-speed on-chip oscillator, and a built-in safety function (hardware illegal-operation detector) tailored for appliance safety standards. The data flash block (typically 4 KB) supports byte-erase and byte-program operation, useful for storing user calibration data without external EEPROM. The RL78/G13 architecture uses a three-stage pipeline and Harvard-style bus topology (separate 16-bit instruction and 8-bit data paths) that yields 43.2 DMIPS at 32 MHz while idling at MCU-class low-power levels. Internal voltage regulation from a single 1.6 V to 5.5 V supply allows direct battery (e.g., 2 x AA) or USB-bus operation; on-chip debug and serial programming use a single-wire TOOL0 interface, eliminating any external debug port hardware. Typical applications include household appliances (washing machines, rice cookers, microwave ovens), low-power IoT sensor nodes, battery-powered metering and remote-control units, and white-goods control boards. The wide operating-voltage window and sub-microamp STOP current make the part attractive for any product that must survive months on batteries. When designing with this device, keep the exposed thermal pad soldered to a continuous ground pour to provide both thermal relief and a low-impedance return for the high-speed on-chip oscillator; respect the 5.5 V absolute maximum on any I/O pin and add ESD clamps on user-accessible connectors. This page synthesises distributor pricing, same-family drop-in alternatives, and design notes not collected in any single distributor listing, complementing the manufacturer's datasheet.

RFQ Contact
R5F1007CANA - 32KB Flash 16-bit RL78/G13 MCU | Renesas | Low-Power
R5F1007CANA

R5F1007CANA - 32KB Flash 16-bit RL78/G13 MCU | Renesas | Low-Power

The Renesas R5F1007CANA is a 16-bit RL78/G13 microcontroller featuring 32KB code flash, 32MHz CPU, and 24-HWQFN (4x4mm) package. It operates from 1.6V to 5.5V with the industry's lowest active current of 66 μA/MHz, STOP-mode standby of 230 nA (or 0.57 μA with RTC and LVD running), and delivers up to 41 DMIPS at 32 MHz. The part is built around the RL78 16-bit CISC core with a 3-stage pipeline, hardware multiplier, and zero-wait flash access. An RL78/G13 microcontroller is a general-purpose 16-bit MCU that combines ultra-low power consumption (ULP) with rich analog and digital peripherals. It belongs to the wider RL78 family of microcontrollers (synonym: low-power 16-bit MCU, ultra-low-power MCU, ULP microcontroller), which in turn are part of the broader category of microcontrollers (MCU) within the integrated circuits (IC) hierarchy used in embedded systems. The RL78/G13 platform is positioned for battery-powered and always-on applications where the MCU spends most of its life in a low-power state but must wake quickly to handle user events. Key features of the R5F1007CANA include on-chip data flash for parameter storage, a 10-bit successive-approximation A/D converter with multiple input channels, configurable 16-bit timers, real-time clock (RTC), low-voltage detection (LVD), UART, CSI/SPI, and I²C interfaces. Hardware safety functions such as illegal-memory-access detection and a clock monitor support IEC/UL 60730 class B household-appliance safety certification. The device includes an on-chip oscillator and supports low-power modes HALT, STOP, and SNOOZE. The R5F1007CANA uses a 24-pin HWQFN (4x4mm) plastic-encapsulated leadless package with an exposed thermal pad, which provides a compact footprint for space-constrained designs. Power-supply architecture is simple: a single 1.6–5.5 V rail directly powers VDD, and internal LDO regulators derive the core voltage, eliminating the need for external regulation. Typical applications include home appliances (washing machines, microwaves, induction cookers), battery-powered IoT sensors, smart meters, HVAC controls, and consumer electronics. The wide operating voltage range lets it run from a single 1.5V cell or two 1.5V cells, while the low STOP current extends shelf life and runtime for energy-harvesting or coin-cell systems. When designing with this device, allocate the smallest-possible decoupling capacitor (typically 0.1 µF ceramic) as close as possible to the VDD/EVDD pins, and tie unused I/O pins to a defined logic level to minimize leakage. The SNOOZE mode can wake the CPU on a UART or A/D event without a full clock restart, cutting average system power substantially in always-listening designs. This page synthesizes distributor stock and pricing, drop-in alternatives in the same 24-HWQFN footprint, and practical low-power design notes that complement the Renesas RL78/G13 datasheet without copying it verbatim.

RFQ Contact
R5F1007CANA#U0 - RL78/G13 16-bit MCU, 32KB Flash, 24-HWQFN | Renesas
R5F1007CANA#U0

R5F1007CANA#U0 - RL78/G13 16-bit MCU, 32KB Flash, 24-HWQFN | Renesas

The Renesas Electronics R5F1007CANA#U0 is a 16-bit RL78/G13 microcontroller built around the low-power RL78 CPU core, integrating 32KB of code flash and 2KB of SRAM in a compact 24-pin HWQFN (4x4 mm) package. It operates from 1.6V to 5.5V with a maximum CPU clock of 32MHz, delivering 43.2 DMIPS of performance while drawing only 66 µA/MHz active and 230 nA in STOP standby with RTC retention. An MCU (microcontroller) is a single-chip computer containing a CPU, non-volatile program memory (flash), volatile data memory (SRAM), and a rich set of on-chip peripherals such as timers, A/D converters, communication interfaces (UART, I2C, CSI/SPI), and general-purpose I/O. The R5F1007CANA#U0 belongs to the ultra-low-power microcontroller category, sitting at the lower end of the power-management IC hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor. Compared with 8-bit MCUs, a 16-bit RL78 offers higher code density, richer peripherals, and better DMA support, while consuming less power than most Cortex-M0+ devices. Key differentiating features include the true low-power platform (66 µA/MHz active, 230 nA STOP, 0.57 µA RTC+LVD), built-in safety functions that detect illegal hardware operation and support IEC/UL 60730 household appliance safety, on-chip data flash for parameter storage, a 32MHz on-chip oscillator, a 10-bit A/D converter, multiple serial interfaces (UART, CSI/SPI, I2C), and 16KB of flash used as data flash for EEPROM emulation. The architecture pairs a 3-stage pipelined RL78 CISC core with 256-byte register banking, accelerating C code execution while the on-chip DTC (Data Transfer Controller) offloads peripheral-to-memory and memory-to-memory moves. Hardware CRC, a watchdog timer with dedicated on-chip oscillator, and illegal-memory-access detection provide a layer of functional safety that is rare in this price tier. Typical applications include white goods and home appliances (washing machines, microwave ovens, refrigerators), battery-powered IoT sensors, HVAC thermostats, smart meters, industrial sensor nodes, and remote controls. The wide 1.6V-5.5V supply range and sub-µA standby make it well suited to energy-harvesting or battery-replacement products. When designing with this device, allocate at least one decoupling capacitor (0.1 µF plus 10 µF bulk) per VDD/AVSS pair, place the 32.768 kHz crystal close to the X1/X2 pins if sub-µA RTC operation is required, and reserve the TOOL0 pin for an on-board debug header. Pin assignment is identical across RL78/G13 24-pin HWQFN family parts, simplifying PCB reuse. This page synthesizes distributor pricing, same-package drop-in alternatives, application guidance and design notes - content not found in the Renesas RL78/G13 datasheet on its own.

RFQ Contact
R5F1007EDNA#U0 - RL78/G13 16-Bit MCU, 32MHz, 64KB Flash, 24-HWQFN | Renesas
R5F1007EDNA#U0

R5F1007EDNA#U0 - RL78/G13 16-Bit MCU, 32MHz, 64KB Flash, 24-HWQFN | Renesas

The Renesas Electronics R5F1007EDNA#U0 is a 16-bit RL78/G13 microcontroller featuring a 32 MHz CPU delivering up to 43.2 DMIPS, 64 KB of code flash plus 4 KB of data flash, and 4 KB of SRAM, packaged in a 24-pin HWQFN (4x4 mm) form factor. It is part of the RL78/G13 family, which Renesas describes as balancing the industry's lowest level of consumption current with high performance for general-purpose embedded applications. An RL78 microcontroller is a 16-bit CISC architecture from Renesas designed as a true low-power platform for general-purpose embedded use, combining a 3-stage pipeline CPU, on-chip analog and digital peripherals, and ultra-low standby current. The RL78 family sits within the broader category of microcontrollers (MCUs) and, more generally, embedded processors in the semiconductor hierarchy. It is engineered to deliver high functional integration while consuming minimal power, making it the entry-level workhorse of the Renesas 16-bit MCU portfolio. Key features of this device include 1.6 V to 5.5 V single-supply operation (covering 1.8 V, 2.5 V, 3.3 V, and 5 V rails), a CPU current of 66 uA/MHz during operation, and a standby (STOP) current as low as 230 nA. The device integrates a precision 12-bit A/D converter, multiple timers, UART, I2C, and CSI serial interfaces, on-chip oscillator, voltage detector (LVD), and watchdog timer. Built-in hardware safety functions detect illegal operation, supporting compliance with household appliance safety standards such as IEC 60730. Architecturally, the RL78/G13 uses the RL78 CPU core combining 16-bit registers with CISC instruction set and 24-bit address space, enabling efficient code density. The on-chip flash includes a block-erase structure with a background operation (BGO) capability, supporting simultaneous programming while executing from a different flash bank. The integrated voltage regulator and power-management circuitry enable direct operation from a single battery cell in many portable applications. Typical applications include household appliances (washing machines, microwave ovens, induction cookers), industrial sensor nodes, low-end smart meters, HVAC control boards, battery-powered IoT devices, and consumer white goods requiring IEC 60730-compliant safety features. The 24-HWQFN package with 4 mm body suits space-constrained PCBs where smaller industrial or consumer modules need an integrated MCU. When designing with the R5F1007EDNA#U0, observe the absolute maximum VDD of 6.0 V and keep decoupling capacitors within 5 mm of the power pins. Enable the on-chip voltage detector (LVD) for brown-out protection in environments with unstable supply rails, and use the hardware safety functions to satisfy IEC 60730 class B requirements in white goods.

RFQ Contact
R5F100GEAFB#10 - 16-Bit RL78/G13 MCU, 64KB Flash, 48-LFQFP | Renesas
R5F100GEAFB#10

R5F100GEAFB#10 - 16-Bit RL78/G13 MCU, 64KB Flash, 48-LFQFP | Renesas

The Renesas Electronics R5F100GEAFB#10 is a 16-bit RL78/G13 general-purpose microcontroller built on a true low-power platform, featuring 64KB code flash, 32 MHz CPU operation (43.2 DMIPS), and a 48-pin LFQFP (7x7 mm) package. It integrates rich on-chip peripherals including a 12-bit A/D converter, data flash, multiple timers, communication interfaces, and a safety-function unit that monitors illegal hardware operation, making it suitable for IEC/UL 60730-compliant household appliances. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and peripheral interfaces into one package. Within the broader semiconductor taxonomy, the R5F100GEAFB#10 belongs to the 16-bit MCU category (a mid-range between 8-bit entry devices and 32-bit ARM Cortex-M cores), and specifically to the RL78 sub-family (a proprietary Renesas low-power ISA succeeding the legacy 78K and R8C families) targeting ultra-low-power embedded applications. Key specifications include: 66 uA/MHz active current, 230 nA STOP-mode standby current, 1.6 V to 5.5 V supply range, 4KB data flash and 4KB SRAM, hardware multiplier/divider, multiple low-power modes (HALT, STOP, SNOOZE), and an on-chip oscillator. The device also includes a real-time clock, watchdog timer, 12-bit SAR ADC, and serial interfaces (CSI/UART/I2C) that reduce external BOM and PCB area. Architecturally, the RL78 uses a three-stage pipelined CISC core with a 16-bit ALU and 24-bit address space, paired with separate code-flash and data-flash regions and a tightly-coupled memory controller. The CSI (Clocked Serial Interface) and UART can run concurrently from different clocks, while SNOOZE mode allows selective peripheral wake-up without full CPU restart, enabling typical current consumption under 1 uA in always-on sensor systems. Typical applications include white-goods control boards (washing machines, dishwashers, microwave ovens), battery-powered sensor nodes, HVAC controllers, motor-control front-ends, smart meters, and industrial sensor hubs. The combination of 32 MHz throughput, low STOP-mode current, and built-in functional safety support makes it a strong fit for mains-powered appliances that must remain quiescent for long intervals while retaining rapid response to user input or sensor events. When designing with this MCU, observe the supply-voltage derating: ensure the 5.5 V absolute maximum is not exceeded by transients on VDD, place decoupling capacitors within 3 mm of each power pin, and use the E1/E2 on-chip debug interface for in-circuit flash programming. The device ships in Pb-free 48-LFQFP and supports the standard Renesas RL78 toolchain (CC-RL compiler, e2 studio IDE). This page consolidates Renesas product-page specifications, distributor pricing, and verified drop-in alternative options to help engineers select and source R5F100GEAFB#10 with confidence.

RFQ Contact
R5F100JEAFA#10 - RL78/G13 16-bit MCU 64KB Flash 52-LQFP | Renesas
R5F100JEAFA#10

R5F100JEAFA#10 - RL78/G13 16-bit MCU 64KB Flash 52-LQFP | Renesas

The Renesas Electronics R5F100JEAFA#10 is a 16-bit RISC microcontroller from the RL78/G13 family, integrating 64 KB of flash program memory and operating at up to 32 MHz (43.2 DMIPS) in a 52-pin LQFP (10x10 mm) package. The device features ultra-low power consumption with CPU operation at 66 uA/MHz and STOP-mode standby current of 230 nA, making it one of the lowest-power MCUs in its class for battery-powered and always-on applications. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), data memory (RAM), and a rich set of on-chip peripherals (ADC, timers, communication interfaces, GPIOs). In the broader system hierarchy, the RL78/G13 sits in the entry-level 16-bit MCU segment alongside Renesas RX and RA families (32-bit), and competes with low-power 8-bit/16-bit MCUs from TI MSP430, ST STM8, and Microchip PIC in cost- and energy-sensitive designs. Key differentiating features include a 1.6 V to 5.5 V wide operating voltage range, on-chip oscillator (no external crystal required for basic operation), 4 KB data flash, multi-channel 10-bit ADC, hardware comparator, and safety-support functions targeting IEC/UL 60730 household appliance compliance. The RL78/G13 family balances low power with sufficient analog and timing peripherals to replace 8-bit MCUs while adding RISC performance. The architecture uses a CISC 16-bit RL78 core with Harvard-style bus, supports serial interfaces (CSI, UART, I2C), multiple general-purpose and event-link timers, and a data-flash area for non-volatile parameter storage. Hardware CRC, IEC 60730 safety routines, and on-chip debugging are integrated for fast firmware development. Typical applications include white-goods motor control (washing machines, dishwashers, induction cookers), low-power IoT sensor nodes, smart-meter metering peripherals, HVAC control boards, and battery-driven consumer devices where 230 nA standby extends coin-cell lifetime. Engineers also use it for industrial sensor interfaces and small home appliances with safety certification needs. When designing with this part, evaluate peripheral count, RAM and flash, plus pin count first - the 52-LQFP package offers more I/O than 30- or 44-pin variants in the same family. For battery products calculate current budget from the datasheet STOP current (230 nA) plus wake-up frequency; for safety-sensitive loads confirm IEC/UL 60730 firmware hooks are enabled. This page synthesizes distributor pricing, drop-in alternatives, lifecycle status, and application guidance not always surfaced on the manufacturer product page.

RFQ Contact