PM583 - AC500 PLC Processor with 1 MB Memory | ABB
MPN: PM583 ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
PM583 Overview
A PLC processor module is the central control element of an industrial automation system. It executes control logic, coordinates communication interfaces, and connects to local or distributed I/O. The PM583 belongs to the AC500 processor-module family and is associated with the PM57x, PM58x, and PM59x technical-data family rather than a discrete semiconductor package. Its communications and memory characteristics make it relevant to machine control, building automation, process monitoring, and equipment diagnostics where a controller must coordinate multiple field devices.
The verified information specifies 1 MB of memory, Ethernet, two RS232/RS485 interfaces, FBP, and a display. The PM583 family documentation also identifies AC500 system data and describes processor-module capabilities, but the supplied snippets do not provide every detailed electrical, environmental, timing, or expansion specification. Those missing values are intentionally not inferred. ABB product pages and the manufacturer technical-data document should be consulted before final design release, particularly for supply voltage, processor performance, environmental limits, communication protocols, and local I/O limits.
The listed ABB documentation refers to the PM57x, PM58x, and PM59x processor-module family and distinguishes standard AC500/S500 data from XC variants. This means the PM583 designation must be matched carefully to the exact product variant and system configuration. The PM583-ETH page is the strongest verified product-page match, while the PM583-ETH-XC page represents a distinct XC-related product and should not be treated as an automatic drop-in replacement.
Typical industrial uses include AC500 machine-control projects, serial-device integration, Ethernet-connected production equipment, and supervisory factory automation. The display and communication interfaces can support diagnostics, operator feedback, and integration with engineering tools or field equipment. System designers should verify the exact base module, I/O configuration, firmware, protocol stack, and fieldbus compatibility before installation.
Because no verified mechanical drawing or complete public pinout was supplied, pin-level replacement cannot be established. Likewise, no price or stock statement was supplied, so commercial terms require quotation. This page preserves the verified ABB identities and attributes while marking unavailable technical data for engineering confirmation.
Drop-in alternatives for PM583 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
No drop-in alternatives available for this product.
Request AlternativesPM583 Maximum Ratings & Electrical Characteristics
| Product Type | AC500 processor module |
| Requested MPN | PM583 |
| Verified Product Designation | PM583-ETH |
| ABB Product ID | 1SAP140300R0271 |
| Memory | 1 MB |
| Ethernet Interface | 1 Ethernet interface |
| Serial Interfaces | 2 x RS232/RS485 |
| FBP Interface | 1 FBP interface |
| Display | Display |
| Maximum Local Analog Inputs | 160 AI |
| Maximum Local Analog Outputs | 160 AO |
| Maximum Local Digital Inputs | 320 DI |
| Maximum Local Digital Outputs | 240 DO/DC |
| Maximum Expansion Modules | 10 expansion modules |
| Product Family | PM57x, PM58x, PM59x processor module family |
| System Family | AC500 and S500 |
| EAN | 4016779711609 |
PM583 standard Pin Configuration Guide
Pin configuration for PM583 (standard package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for PM583.
Refer to the datasheet for full pin configuration.
Typical Applications
PM583 is suitable for 6 applications: AC500 Machine Control, Industrial Ethernet Integration, Serial Device Supervision, Operator Interface and Diagnostics, Distributed Factory Automation, Process and Equipment Automation.
AC500 Machine Control
The PM583 is suitable for central control in an AC500 machine-control architecture where local processing, Ethernet connectivity, serial communications, and operator feedback are useful together. The verified product listing identifies 1 MB of memory, Ethernet, two RS232/RS485 interfaces, FBP, and a display, giving a design team a defined communication mix for machine sequencing and diagnostics. The processor should be paired with the correct ABB terminal base and expansion modules. Maximum local figures must be treated as family-level limits and checked against the selected module mix. Because the exact PM583 ordering variant is not fully resolved, validate firmware, addressing, I/O capacity, and communication configuration against the ABB technical document before production release.
Recommended
Industrial Ethernet Integration
PM583 can serve as the communications-focused processor for an AC500 installation that needs Ethernet alongside local automation functions. The verified ABB listing explicitly identifies Ethernet as one of the PM583-ETH interfaces, while the family document provides system-level context for AC500 and S500 deployments. In a real design, Ethernet availability must be matched to the protocol stack, network topology, engineering configuration, and security requirements. The RS232/RS485 and FBP interfaces provide additional integration paths for serial equipment and ABB fieldbus arrangements. Do not assume that Ethernet alone determines controller suitability: processor performance, memory use, I/O loading, environmental ratings, and licensing or firmware constraints still require confirmation from the exact ABB documentation.
Recommended
Serial Device Supervision
The two RS232/RS485 interfaces listed for PM583-ETH are relevant to machines that must exchange data with local serial instruments, drives, panels, or service equipment. A system integrator can use the processor as the control and coordination layer while routing serial communications through the documented AC500 configuration. The exact electrical standard, connector, baud-rate range, isolation, and termination requirements are not present in the supplied snippets and must not be assumed. Engineering validation should include protocol mapping, cable length, grounding, surge protection, and response-time behavior. The 1 MB memory figure also supports the processor role, but actual program and data capacity depends on the controller configuration and firmware environment.
Recommended
Operator Interface and Diagnostics
The verified PM583-ETH listing includes a display, making the processor relevant to machine diagnostics and operator-feedback designs. A local display can help expose controller status, alarms, process values, or service information without relying solely on a remote engineering station. The supplied data does not define display resolution, interface protocol, update rate, or supported visualization functions, so those details must be confirmed in the ABB documentation. The module should be integrated with the intended panel and software configuration rather than treated as a standalone display. Verify enclosure access, electrical limits, environmental conditions, and operator-safety requirements during panel design.
Recommended
Distributed Factory Automation
PM583 fits distributed factory-automation concepts where a central AC500 processor coordinates local I/O, serial equipment, and network-connected assets. The related technical material lists maximum local capacities of 160 AI, 160 AO, 320 DI, and 240 DO/DC and up to 10 expansion modules, providing useful preliminary sizing information. Actual architecture design must account for the selected modules, terminal bases, power budget, field wiring, communication load, and system variant. The verified PM583-ETH attributes also give a clear baseline for communication planning. For plant deployment, validate environmental requirements, grounding, network segmentation, maintenance access, and functional-safety implications before approving the controller configuration.
Recommended
Process and Equipment Automation
The PM583 family can be evaluated for equipment automation projects that combine local control with Ethernet, serial, and FBP connectivity. Its 1 MB memory figure and documented local I/O ceilings make it a candidate for supervisory control layers that do not require a larger controller without detailed project analysis. Engineers should verify whether the selected PM583 variant supports the required process functions, communication protocol, expansion modules, and operating environment. The verified snippets do not provide analog resolution, input isolation, output drive characteristics, or environmental limits. Those specifications must be obtained from the applicable ABB PM57x/PM58x/PM59x document before sensor selection, output sizing, or safety-related wiring is approved.
Recommended
Recommended Products Summary
Engineering reference data for PM583 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product |
|---|---|
| Product Type | AC500 processor module |
| Requested MPN | PM583 |
| Verified Product Designation | PM583-ETH |
| Memory | 1 MB |
| Ethernet Interface | Ethernet |
| Serial Interfaces | 2 x RS232/RS485 |
| FBP Interface | FBP |
| Display | Display |
| Maximum Local Analog Inputs | 160 AI |
| Maximum Local Analog Outputs | 160 AO |
| Maximum Local Digital Inputs | 320 DI |
| Maximum Local Digital Outputs | 240 DO/DC |
| Maximum Expansion Modules | 10 expansion modules |
| Brand | ABB |
Key Differentiators
- Verified communication combination (vs PM583-ETH)
- Local automation capacity (vs PM583-ETH)
- Local operator feedback (vs PM583-ETH)
Design Notes
Do not treat PM583 and PM583-ETH as interchangeable without checking the exact ABB ordering designation, product ID, terminal-base arrangement, firmware, and system variant. The verified product page describes PM583-ETH, while the requested target is PM583. A family-level processor list does not establish pin, terminal, electrical, or software compatibility. Obtain the current ABB product documents and record the approved ordering code before integrating it into a machine or process system.
Design the AC500 installation around the approved terminal base and expansion-module arrangement rather than around a generic connector footprint. Route Ethernet and RS232/RS485 cables according to the applicable ABB installation requirements, separate them from high-energy or noisy wiring where practical, and verify connector accessibility in the final enclosure. FBP and local I/O wiring should follow the exact module documentation. The supplied data does not include terminal numbering, conductor sizes, shielding rules, or clearances, so those values must not be guessed.
Validate memory and I/O sizing against the actual project configuration. The verified material lists 1 MB of memory and maximum local capacities of 160 AI, 160 AO, 320 DI, 240 DO/DC, and 10 expansion modules, but these figures may depend on the AC500 or XC configuration and selected modules. Include communication buffers, diagnostics, application data, and future expansion when assessing capacity. Confirm compatibility of every selected module and terminal base before purchasing or commissioning.
Compliance Information
Compliance information was not present in the verified web data. PM583 is an industrial PLC processor module rather than an automotive semiconductor, so AEC-Q100 is not applicable based on the supplied product context.
