Microcontrollers

Products (20,000+)

Z84C00 - CMOS Z80 8-Bit CPU Microprocessor | Zilog
Z84C00

Z84C00 - CMOS Z80 8-Bit CPU Microprocessor | Zilog

The Zilog Z84C00 is a CMOS Z80 8-bit central processing unit (CPU) microprocessor available in speed grades of 6 MHz, 8 MHz, 10 MHz, and 20 MHz, executing 158 instructions with software compatibility to the Intel 8080A, housed in 40-pin DIP, 44-pin PLCC, or 44-pin QFP packages. A microprocessor (CPU) is the core computation and control block of a computer or embedded system, executing stored instructions and coordinating memory and peripheral I/O. The Z80 family sits within the 8-bit microprocessor hierarchy, which in turn belongs to the broader semiconductor category of embedded processors. First released by Zilog in 1976, the Z80 became one of the most widely deployed CPUs of the early personal computing era. Key features of the Z84C00 include its extensive 158-instruction set (including 8080A-compatible instructions plus indexed, block, and bit instructions), dual register file with alternate registers for fast context switching, on-chip dynamic RAM refresh counter, and a single 5V supply. The CMOS process delivers significantly lower power consumption than the original NMOS Z8400, making it suitable for battery-powered and industrial systems. Technically, the Z84C00 is a fourth-generation enhanced microprocessor offering higher system throughput and more efficient memory utilization than second- and third-generation processors, according to the Zilog Z8400/Z84C00 datasheet. It provides 16-bit address bus capability for up to 64 KB of memory addressing, interrupt modes 0, 1, and 2, a non-maskable interrupt (NMI) input, and WAIT states for slow memory. Typical applications include retro-computing repairs and reproductions (ZX Spectrum, MSX, RC2014 kits), industrial control and instrumentation, embedded controllers, and educational platforms. Its decades-long software ecosystem makes it a natural fit for legacy system maintenance. Design consideration: verify the speed-grade suffix (06, 08, 10, 20) against your clock source, and note the Z84C00 family was officially discontinued by Zilog with last orders in June 2024, so plan lifecycle sourcing accordingly. This page synthesizes distributor availability data, drop-in same-family alternatives, and lifecycle guidance not found in the manufacturer datasheet.

RFQ Contact
Z84C0010FEC - 10MHz CMOS Z80 CPU, 44-LQFP | Zilog
Z84C0010FEC

Z84C0010FEC - 10MHz CMOS Z80 CPU, 44-LQFP | Zilog

The Zilog Z84C0010FEC is a CMOS Z80 8-bit microprocessor (CPU) core operating at clock speeds up to 10 MHz, housed in a 44-pin LQFP (10 x 10 mm) surface-mount package. As a member of the Z84C00 family, it delivers the classic Z80 architecture in a low-power CMOS process. A microprocessor is the central processing unit (CPU) of a computing system, responsible for executing program instructions, performing arithmetic and logic operations, and controlling memory and peripheral access. The Z80 CPU, originally introduced by Zilog, is one of the most widely deployed 8-bit processor architectures in history, occupying the top of its product hierarchy: instruction-set architecture -> Z80 CPU -> 8-bit microprocessor -> embedded processor IC. Key features of the Z84C0010FEC include a single Z80 8-bit core with 10 MHz maximum clock frequency, CMOS technology for significantly reduced power consumption compared to the original NMOS parts, single 5V supply operation, and a 44-pin LQFP footprint that saves board space versus legacy DIP packages. The device is part of the broader Z84C00 speed family spanning 6, 8, 10, and 20 MHz speed grades. Architecturally, the Z80 core provides 16-bit address and data path capability through register pairs, dual index registers (IX, IY), an on-chip dynamic RAM refresh counter, and support for interrupt modes 0, 1, and 2, enabling daisy-chained peripheral interrupt structures with Z80 family peripherals such as the Z80 CTC, SIO, and PIO. Typical applications include legacy industrial control systems, embedded retro-computing and hobbyist designs, telecom line cards, and maintenance replacement of CPU silicon in long-life equipment where software compatibility with the Z80 instruction set must be preserved. Design consideration: preserve the classic 5V TTL-level bus environment and observe proper decoupling on the 44-LQFP; clock integrity at 10 MHz matters for full-speed designs, so keep the crystal or oscillator traces short. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

RFQ Contact
Z84C0020PEC - 20 MHz Z80 CMOS CPU | Zilog | DIP-40
Z84C0020PEC

Z84C0020PEC - 20 MHz Z80 CMOS CPU | Zilog | DIP-40

Zilog Z84C0020PEC is an 8-bit CMOS Z80 central processing unit operating at 20 MHz in a 40-pin PDIP package. The verified distributor data identifies one core, a 20 MHz clock, and 40-pin PDIP construction. The family datasheet identifies the device as part of the enhanced Z8400/Z84C00 processor family, whose internal register set contains 208 bits and whose architecture supports efficient memory utilization and software migration. A microprocessor is the central control element of a computer or embedded controller, fetching instructions, decoding operations, and coordinating memory and peripheral access. The Z80 belongs to the 8-bit microprocessor class and extends the earlier Z80 architecture through enhanced processing capability. Within the broader electronics hierarchy, it is a CMOS microprocessor IC rather than a microcontroller: external memory, clocking, reset, interrupt, and peripheral circuitry remain part of the surrounding system design. The most important verified specifications are the 8-bit CPU architecture, 20 MHz operating frequency, single-core configuration, CMOS technology, and PDIP-40 package. Zilog describes speed offerings across the broader family from 6 MHz through 20 MHz. The manufacturer documentation states that the processor family provides improved system throughput and more efficient memory utilization than comparable earlier-generation processors while retaining software-migration support. Z84C0020PEC is suitable for legacy Z80 systems, industrial controllers, educational platforms, embedded instruments, and retro-computing designs that specifically require this processor and package. Its parallel CPU architecture remains useful for systems built around Z80 memory, interrupt, and peripheral conventions. Because it is a microprocessor rather than a self-contained microcontroller, designers must provide the required external system components and verify timing, bus loading, and software compatibility. A critical hardware requirement is confirmation of the complete operating voltage, temperature grade, pinout, timing, and electrical limits from the manufacturer datasheet for the exact ordering code. The suffix PEC is associated with the listed 40-pin PDIP device, but package and suffix details should not be inferred beyond the supplied data when purchasing or redesigning. This page consolidates verified distributor identification, manufacturer family documentation, sourcing links, and practical replacement guidance. It also distinguishes true same-footprint drop-in candidates from alternatives that are merely functionally similar but would require board changes, preventing an incompatible substitution from being presented as a safe replacement.

RFQ Contact
Z8619340ASG - 8-Bit 40MHz ROMless MCU | Zilog
Z8619340ASG

Z8619340ASG - 8-Bit 40MHz ROMless MCU | Zilog

Zilog Z8619340ASG is an 8-bit Z8 ROMless microcontroller operating at up to 40 MHz and supplied in a 64-pin LQFP surface-mount package. The device belongs to the Z86193 family and combines a ROMless architecture with multiplier, divider, and serial-interface capabilities identified in the manufacturer’s product listing. Its 64-lead gull-wing package provides a substantial number of external I/O connections for embedded control systems that need more peripheral connectivity than a compact 8-bit MCU normally offers. A microcontroller is a programmable integrated circuit containing a processor core, memory interface, and dedicated peripherals on one chip. Within the embedded-system hierarchy, the Z8619340ASG is an 8-bit MCU, a member of the Z8 family, and a ROMless member of the Z86193 series. ROMless devices generally require program memory to be connected externally, giving the designer flexibility in firmware storage while requiring careful bus and board-level design. The headline configuration is an 8-bit processor operating at 40 MHz in an LQFP-64 package. Because program storage is external, application code must be supplied by an external memory device rather than an internal mask-programmed or one-time-programmable ROM. This makes the device suitable for applications in which firmware is loaded, revised, or stored externally, provided that the system designer implements the required memory interface and associated circuitry. The product listings also identify multiplication, division, and serial-interface functions. Multiplication and division support is important in embedded calculations involving scaling, timing, signal processing, and display formatting. Integrated serial capability reduces the need for separate peripheral ICs when the surrounding system can use the interfaces supported by the Z86193 family. Exact peripheral assignments, interrupt behavior, voltage limits, memory-interface details, and clock configuration must be confirmed against the manufacturer’s pin description and device documentation before layout release. The LQFP-64 package is a surface-mount gull-wing package intended for automated board assembly and compact multilayer PCB construction. Its exposed lead geometry supports inspectable solder joints, but correct pad design, solder mask definition, and paste volume remain important. Because this is a 64-pin device, careful pin planning is necessary to avoid routing conflicts among address, data, control, serial, and general-purpose I/O signals. Typical uses for this microcontroller family include industrial control modules, instrumentation, communication equipment, motor-control interfaces, and embedded controllers with external program memory. A design using the Z8619340ASG should be selected when its documented I/O count, external-memory architecture, 40 MHz operating speed, and family peripheral set match the product requirements. It is less suitable where a smaller package, integrated nonvolatile memory, low-power operation, or a different instruction set is required. This page consolidates the verified package and core-device characteristics, practical PCB considerations, sourcing information, and a strict assessment of replacement candidates. It also distinguishes documented facts from parameters that must be checked in the official device documentation, helping engineers plan the MCU, memory interface, and PCB before committing the design to production.

RFQ Contact
Z8673312PSG - 8-Bit 12MHz 8KB OTP Microcontroller | Zilog
Z8673312PSG

Z8673312PSG - 8-Bit 12MHz 8KB OTP Microcontroller | Zilog

Zilog Z8673312PSG is an 8-bit Z8 CMOS microcontroller operating at up to 12 MHz with 8 KB of one-time-programmable memory, supplied in a 28-pin DIP package. The verified distributor listings identify the device as a Z8 Z8 microcontroller with 8K x 8 OTP memory and a 12 MHz clock. Its architecture sits within the hierarchy of microcontrollers, embedded processors, and general-purpose semiconductor ICs. An 8-bit microcontroller is a compact embedded controller designed to execute instructions from a fixed program memory and interface with sensors, switches, indicators, communications circuits, and other peripherals. One-time-programmable memory is intended for final firmware versions that do not need repeated field updates, while the 12 MHz operating rate provides the execution headroom required by typical control and monitoring tasks. The principal verified characteristics are an 8-bit processor architecture, 12 MHz maximum operating frequency, 8 KB of OTP program memory organized as 8K x 8, CMOS construction, and a 28-pin DIP package. The DIP format supports conventional PCB insertion and prototyping workflows. The listing also identifies the product with the Z8 family, placing it in Zilog's established embedded-controller product line. The device's architecture is relevant for cost-sensitive embedded systems where deterministic firmware execution, compact logic integration, and one-time-programmable storage are more important than flash reprogrammability. A datasheet provides the authoritative pin, electrical, timing, and environmental limits. Those details were not reproduced in the supplied verification snippets and should therefore be checked before final schematic, clock, and reset design work. Typical design uses include simple industrial control panels, appliance controllers, small sensor-hub nodes, LED sequencing modules, and embedded timing or event-control systems. The 12 MHz clock and 8 KB OTP memory are sufficient for focused firmware that reads inputs, executes control logic, and drives outputs without requiring a high-performance processor or external program-memory device. Designers should treat the 28-pin DIP footprint and 8 KB OTP limit as fixed constraints. Firmware size must be checked against the available program memory before production programming because OTP devices cannot be conventionally reflashed. Decoupling, reset, oscillator, and unused-pin handling should follow the manufacturer datasheet rather than generic MCU assumptions. This product data consolidates verified distributor descriptions, package information, datasheet access, and same-family alternatives. It also distinguishes published facts from unavailable details, allowing engineers to evaluate sourcing and replacement options without mistaking unsupported electrical, environmental, lifecycle, or pricing claims for manufacturer specifications.

RFQ Contact
Z8673312SSG - 8-Bit 12MHz OTP Microcontroller | Zilog
Z8673312SSG

Z8673312SSG - 8-Bit 12MHz OTP Microcontroller | Zilog

Zilog Z8673312SSG is an 8-bit Z8 microcontroller with a 12 MHz clock, 8 KB of one-time-programmable memory, and a 28-pin SOIC package for commercial-temperature embedded control. It combines an 8-bit data path with 8K x 8 OTP program storage in a compact surface-mount package measuring approximately 18 mm by 2.44 mm in height. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripheral functions onto one device. The Z8 belongs to the broader embedded-controller hierarchy: Z8 8-bit MCU → Z80-based core → embedded microcontroller → embedded semiconductor. Such devices are used where a compact controller must execute firmware, read inputs, control outputs, and manage basic timing or communications without a separate processor and external program-memory device. The Z8673312SSG's primary characteristics are its 12 MHz maximum clock frequency, 8 KB OTP program memory, 8-bit architecture, and 28-pin SOIC package. OTP memory permits one-time configuration of operating firmware, making the device useful for production controllers where final programmed code must remain inside the device without allowing routine field updates. Its 28-pin SOIC footprint also supports conventional surface-mount assembly and prototyping workflows. The Z8 architecture supports compact embedded-control designs rather than high-compute workloads. Its 8-bit bus architecture and 12 MHz clock are appropriate for digital control, sequence control, simple user-interface handling, and peripheral coordination. Because OTP program memory cannot be rewritten after programming, firmware validation and manufacturing provisioning should occur before the device reaches the end user. Typical uses include industrial equipment interfaces, appliance controllers, small motor-control modules, sensor-conditioning systems, and compact embedded products. The commercial-grade part can be used in designs where the operating environment remains within its specified commercial-temperature limits. For mains-powered or battery-powered products, designers should account for the stated 5 V operating supply and validate timing, power, and I/O requirements in the completed system. A critical design consideration is the one-time-programmable nature of the 8 KB program memory. Firmware must fit within 8 KB, include all required interrupt and peripheral routines, and be fully tested before programming. The complete pin description, electrical limits, oscillator connections, and programming procedure should be taken from the manufacturer datasheet before assigning PCB signals or defining the power architecture. This product page organizes the Z8673312SSG's core specifications, verified package information, commercial sourcing path, compatible replacement data, and practical implementation guidance. It also distinguishes confirmed drop-in interchangeability from generic functional similarity, helping engineers make faster PCB reuse decisions without confusing an exact replacement with merely comparable microcontroller families.

RFQ Contact
Z8674312ASG - 8-Bit 12MHz 8KB OTP Microcontroller | Zilog
Z8674312ASG

Z8674312ASG - 8-Bit 12MHz 8KB OTP Microcontroller | Zilog

The Zilog Z8674312ASG is an 8-bit Z8 OTP microcontroller operating at 12MHz, with 8KB of one-time-programmable program memory, 236 bytes of RAM, and a 44-pin LQFP package measuring 10mm by 10mm. It is designed for embedded control applications that require a compact microcontroller, deterministic I/O handling, and a moderate operating-voltage range from 3.5V to 5.5V. A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one device. The Z8 family provides a low-cost platform for appliance controls, industrial equipment, meters, and simple embedded systems. The Z8674312ASG uses OTP program memory, which allows firmware to be programmed once during manufacturing or after assembly but prevents normal field reprogramming. This makes the device suitable for products where a stable, fixed control program is preferred over application-update flexibility. The Z8674312ASG combines an 8-bit processor core with 12MHz operation, 8KB of OTP program storage, and 236 bytes of RAM. The 44-LQFP package provides 44 external leads for connection to peripheral circuits, power, clocking, reset, and input/output functions. Its 3.5V to 5.5V supply range supports conventional embedded-control rails found in industrial and commercial equipment. This part is identified as part of the Z86743 series and is categorized as an SMT CMOS Z8 OTP microcontroller. The commercial-temperature classification and square gull-wing QFP form factor make it appropriate for standard PCB assembly rather than a space-constrained leadless package. The package dimensions support routing through standard 10mm-by-10mm LQFP land patterns. Typical uses include small industrial controllers, sensor-interface boards, motor-control support logic, measurement instruments, and appliance-control systems. Firmware development should account for the limited 236-byte RAM and the one-time nature of OTP memory. Application code should be tested thoroughly before programming because changes require replacement or a new programmed device. A practical design consideration is the distinction between OTP program memory and reusable Flash memory. If a product requires field upgrades, remote reconfiguration, or frequent firmware revisions, an MCU with rewritable Flash memory may be a better functional fit. For fixed-production applications, the Z8674312ASG can provide a compact and straightforward implementation. This page consolidates the confirmed Z8674312ASG identifiers, package information, memory characteristics, operating frequency, and design guidance while clearly separating confirmed specifications from details that require the manufacturer datasheet or a validated cross-reference record.

RFQ Contact
Z8674312PSG - 8-Bit 12MHz OTP Microcontroller | Zilog
Z8674312PSG

Z8674312PSG - 8-Bit 12MHz OTP Microcontroller | Zilog

The Zilog Z8674312PSG is an 8-bit Z8 Z86-family microcontroller with 8 KB of one-time-programmable program memory, 236 x 8 bytes of RAM, a 12 MHz maximum operating frequency, and 32 general-purpose I/O pins in a 40-pin PDIP package. A microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, data memory, I/O ports, and peripherals on one device. The Z8674312PSG belongs to the Z8 microcontrollers family within the broader embedded-controller and semiconductor hierarchy. Its OTP program memory permits a finished device to be programmed once, making it suitable for cost-sensitive products that do not require in-circuit firmware updates. The principal device characteristics include an 8 KB (8K x 8) OTP program-memory capacity, 236 x 8 bytes of RAM, and a maximum clock frequency of 12 MHz. The device provides 32 general-purpose I/O pins, a Z8 processor core, EBI/EMI connectivity, power-on reset, and a watchdog timer. These features provide a practical combination of control logic, data storage, and peripheral integration for embedded products. The 12 MHz operating limit should be treated as the timing ceiling for the complete design, including clock tolerance, peripheral timing, and interrupt-service requirements. Its 8 KB OTP memory is suitable for compact control firmware, but memory utilization must be checked after including the startup code, drivers, interrupt routines, and application logic. The 236-byte RAM area also requires attention when buffering data or maintaining multiple task stacks. Typical uses include appliance controllers, small industrial control modules, building equipment, instrumentation, simple human-interface panels, and embedded automation products. For a new design, engineers should confirm oscillator requirements, available I/O, memory consumption, timing margins, and interrupt behavior against the complete Zilog datasheet before committing the 40-pin footprint. The main design consideration is that OTP memory cannot be erased and rewritten in the field. Firmware validation must therefore occur before final programming, while power, ground, and decoupling layout must follow the electrical requirements published for this device family. This page consolidates verified distributor specifications, procurement details, package information, application guidance, and design cautions into a compact engineering reference that helps distinguish this Z8 microcontroller from broader embedded processor families.

RFQ Contact
Z86C9012ASG - 12MHz ROMless 8-bit MCU | Zilog
Z86C9012ASG

Z86C9012ASG - 12MHz ROMless 8-bit MCU | Zilog

The Zilog Z86C9012ASG is a 12 MHz ROMless C40 8-bit microcontroller with 32 I/O lines, 236 bytes of RAM, and a 44-pin LQFP package. It operates from 3.0 V to 5.5 V and includes two 8-bit timers, six interrupts, a watchdog timer, power-on reset, low-voltage protection, and two analog comparators. An 8-bit microcontroller is a programmable semiconductor that integrates a processor core, memory, input/output ports, timers, and peripheral functions on one device. The Z86C9012ASG belongs to the broader Z8 family and the Z86C90 series of embedded controllers. Its ROMless architecture means application code is loaded from external program memory, making the device suitable for systems where firmware size, update requirements, or program-memory organization must be controlled by the designer. The device provides 32 I/O lines across a 44-pin package, leaving additional pins for power, clock, reset, programming, and other platform functions. Its two 8-bit timers support periodic events, timing, counting, and basic control functions. Six interrupt sources, an active watchdog timer, power-on reset, and low-voltage protection improve the suitability of the controller for embedded equipment that must continue operating predictably through normal control tasks and electrical disturbances. The 12 MHz operating speed provides a useful balance between processing capability, power consumption, and external-memory access in a compact embedded design. The C40 architecture is designed for 8-bit control applications and works with external program storage. Because no internal ROM is listed for this variant, the board design must include the appropriate external memory interface and a valid firmware-loading arrangement. Typical uses include appliance controllers, small industrial control modules, instrumentation interfaces, keypad and display products, and embedded products requiring timers, interrupt-driven I/O, and analog comparison functions. The two analog comparators can support threshold detection, while the general-purpose I/O can operate discrete switches, indicator circuits, and digital sensors. A key design consideration is the relationship between external memory access, clock configuration, and the device's 3.0 V to 5.5 V operating range. Board layout should keep memory-bus traces short and provide suitable decoupling at the supply pins. Firmware must also configure the watchdog and interrupt priorities so that normal peripheral servicing cannot be interrupted indefinitely. This page consolidates the Z86C9012ASG's key architectural ratings, package information, application guidance, and design considerations into one engineering-focused reference. It also distinguishes documented characteristics from parameters that require confirmation from the manufacturer datasheet before layout or production release.

RFQ Contact
Z86C9012FSC - 12MHz 8-Bit ROMless MCU | Zilog
Z86C9012FSC

Z86C9012FSC - 12MHz 8-Bit ROMless MCU | Zilog

Zilog Z86C9012FSC is an 8-bit Z8 ROMless microcontroller operating at 12 MHz in a 44-pin LQFP package measuring 10 mm by 10 mm. Its key characteristics include an 8-bit CPU core, ROMless architecture, commercial temperature grade, 5 V supply, and EBI/EMI connectivity support. The device is designed for embedded control systems that require external program and data memory while using a compact surface-mount package. A ROMless microcontroller is a semiconductor that contains the processor core and peripheral functions but requires external memory for application code and data. Within the embedded-control hierarchy, the Z86C9012FSC belongs to the 8-bit microcontroller class, combines an 8-bit CPU with external bus interfaces, and serves as the central control component in industrial, commercial, and instrumentation equipment. Unlike a device with embedded program memory, it allows firmware capacity to scale with an external memory device. The Z86C9012FSC operates at 12 MHz and is identified as an 8-bit ROMless MCU. Its 44-LQFP surface-mount package provides 44 external terminals and a 10 mm by 10 mm footprint. EBI/EMI connectivity expands the available external data-bus and memory-oriented interfaces, while the 5 V operating supply supports conventional industrial-control voltage levels. The commercial temperature designation makes the device appropriate for equipment operating within commercial environmental conditions. The Z8 CPU provides an 8-bit processing architecture suited to control loops, digital interfaces, and sequential logic rather than high-throughput computing. Because program storage is external, firmware deployment depends on the selected external memory device, bus configuration, and memory-map design. This separation can make board storage capacity independent of the MCU package and can support field-update architectures when the external memory interface is suitable. Typical uses include industrial controllers, instrument panels, keypad interfaces, embedded motor and process controls, and legacy peripheral-control systems. The 12 MHz operating rate supports deterministic tasks requiring regular sampling, protocol handling, and state-machine updates. EBI/EMI connectivity is particularly relevant to systems that need external code storage, data memory, or bus-connected peripherals. During schematic capture, treat the external memory bus and programming interface as central design areas. Preserve the manufacturer's recommended decoupling, oscillator, reset, and memory-bus routing, and verify all signal timing and drive requirements against the manufacturer datasheet. The ROMless architecture also requires a complete firmware and external-memory design before the circuit can operate as a standalone controller.

RFQ Contact
Z86C9012PEG - 8-Bit 12MHz ROMless MCU | Zilog
Z86C9012PEG

Z86C9012PEG - 8-Bit 12MHz ROMless MCU | Zilog

The Zilog Z86C9012PEG is an 8-bit Z8 ROMless microcontroller operating at 12 MHz with a 3 V to 5.5 V supply range, 32 I/O ports, and a 40-pin dual-inline package. It is designed for embedded control applications that require external program and data memory while providing a conventional 8-bit processor architecture, parallel digital I/O, and compact through-hole integration. An 8-bit microcontroller is a programmable semiconductor that executes instructions from a defined instruction set and operates on byte-sized data. The Z8 family belongs to the broader embedded-controller hierarchy: ROMless microcontroller → 8-bit microcontroller → embedded processing IC → semiconductor. ROMless architecture allows application firmware and working data to be placed in external memory, making the controller suitable when code size, memory upgrades, or separate storage requirements must be controlled by the system designer. The Z86C9012PEG combines a 12 MHz clock with 32 I/O ports in a 40-pin DIP package. Its operating supply range of 3 V to 5.5 V supports both 3.3 V and 5 V system designs when the external memory, peripherals, and I/O levels are compatible. The external-memory architecture provides implementation flexibility, while the parallel I/O count supports digital control, data acquisition, display interfaces, and communication peripherals. Because the device is ROMless, a complete system requires suitable external program memory and the associated address, data, and control connections. The 12 MHz operating frequency provides the timing reference for instruction execution and peripheral interfacing. As with other 8-bit controllers, the practical clock rate, code timing, and bus performance depend on the external memory implementation, bus timing, and firmware rather than on internal program storage alone. Typical uses include industrial control panels, building automation modules, instrumentation interfaces, motor-control logic, programmable timers, and legacy embedded systems being refreshed without changing an existing 40-pin PCB footprint. The DIP format is particularly useful for through-hole industrial equipment, prototypes, repair assemblies, and designs assembled in small or medium production volumes. The primary design consideration is compatibility with the existing controller ecosystem. Confirm pin assignments, external-memory requirements, reset behavior, oscillator connections, supply levels, and peripheral compatibility before replacing another device. Use the Zilog datasheet and pin-description table as the authority for PCB routing, and validate timing with the intended external memory and crystal or clock source. This product page consolidates the confirmed Z86C9012PEG specifications, package characteristics, sourcing information, and practical integration guidance. It also distinguishes confirmed attributes from details that require datasheet verification, helping engineers assess fit for an embedded-control redesign or legacy-system maintenance.

RFQ Contact
Z86C9116AEG - 8-Bit 16MHz ROMless MCU | Zilog
Z86C9116AEG

Z86C9116AEG - 8-Bit 16MHz ROMless MCU | Zilog

The Zilog Z86C9116AEG is an 8-bit Z8 ROMless microcontroller operating at 16 MHz and packaged in a 44-LQFP measuring 10 mm by 10 mm. Its 4.5 V to 5.5 V operating-supply range and -40 °C to 105 °C ambient-temperature range suit embedded control systems requiring a compact, surface-mountable processor. A microcontroller is a programmable semiconductor that integrates a processor core, memory interfaces, and peripheral functions on one device. The Z8 family belongs to the 8-bit microcontroller hierarchy, where each instruction operates on an 8-bit data unit. The Z86C9116AEG is ROMless, meaning that its program storage must be supplied by external memory rather than an internal mask-programmed ROM. This architecture is useful when firmware updates, flexible code storage, or separate program and data memories are required. The headline operating characteristics are a 16 MHz clock, an 8-bit architecture, and ROMless configuration. Its 4.5 V minimum supply voltage means the device operates within a conventional 5 V embedded-processing range. The 44-LQFP package provides a surface-mount assembly option with external leads on all four sides. Since the MCU has no internal program ROM, the board must include an external program-memory interface and suitable memory circuitry. The Z86C9116AEG targets compact embedded controllers where an 8-bit processor is sufficient for supervisory control, sequencing, input processing, and peripheral coordination. The external-memory architecture allows the application code to be changed without replacing the microcontroller, which can simplify long-life product maintenance. Clock and bus timing must be designed for 16 MHz operation, while firmware must account for the access time of the selected external memory device. Typical uses include industrial control modules, instrument panels, building equipment, appliance controllers, and compact peripheral controllers. The 44-LQFP package is particularly useful where a larger leaded package would be unsuitable for automated assembly. For cost-sensitive or space-constrained designs, engineers should compare the board area and external-memory cost of this ROMless device against Z8 devices that contain internal program memory. PCB design should preserve the pin assignments and layout requirements defined by the Zilog datasheet, especially for the external program-memory interface and clock circuitry. Decoupling capacitors should be placed directly at the supply pins, while all unused inputs should be connected to defined logic levels. Firmware development requires a programmer, Z8-compatible toolchain, and the device-specific configuration information published by Zilog. This product page consolidates the confirmed device identity, package, supply range, temperature range, and ROMless architecture into an engineering-focused selection reference. It also distinguishes the confirmed characteristics of Z86C9116AEG from unverified replacement assumptions, helping engineers make a defensible PCB, firmware, and sourcing decision.

RFQ Contact
Z86C9116FEC - 16MHz 8-Bit ROMless MCU | Zilog | Embedded Control
Z86C9116FEC

Z86C9116FEC - 16MHz 8-Bit ROMless MCU | Zilog | Embedded Control

The Zilog Z86C9116FEC is an 8-bit Z8 ROMless microcontroller operating at 16MHz, with 236 bytes of RAM, 32 I/O lines, two 8-bit timers, and a UART interface in a 44-LQFP package measuring 10mm by 10mm. The device is designed for embedded control applications that require external program memory and a compact, surface-mount microcontroller package. A ROMless microcontroller is an 8-bit microcontroller that does not contain its application program in internal ROM. It must be paired with an external memory device, which gives the system designer flexibility to select program capacity independently of the MCU. In the product hierarchy, Z86C9116FEC belongs to the Z8 family of ROMless microcontrollers and provides a straightforward architecture for small embedded controllers. The principal features of this device include a 16MHz operating frequency, 236 bytes of on-chip RAM, 32 general-purpose I/O lines, two 8-bit timer blocks, and one UART communication interface. Its ROMless architecture makes it appropriate when firmware changes are expected, when program storage requirements vary between products, or when a common external flash configuration is desired across multiple controller variants. The Z8 architecture provides an 8-bit processing path optimized for embedded control tasks rather than high-throughput computing. Combined with 32 I/O lines, the device can directly support digital inputs, outputs, control signals, and peripheral interfaces. The two 8-bit timers support timing and event-counting duties, while the UART provides a serial channel for connecting the controller to a host, sensor assembly, or communication module. Typical design opportunities include programmable logic controllers, appliance controllers, building-control modules, motor-sequence controllers, industrial interface modules, and compact embedded automation products. Its 44-LQFP package provides a practical pin count for systems requiring numerous external connections while remaining compatible with standard surface-mount assembly and inspection processes. A key design consideration is that the ROMless device requires suitable external program memory and a correctly designed bus interface. Designers should also confirm the available operating voltage, clock configuration, peripheral pin assignments, and memory interface requirements against the current Zilog datasheet before finalizing the schematic or PCB layout. This product page consolidates the verified distributor specifications, package information, pricing availability, cross-reference evidence, and design considerations for Z86C9116FEC. It also distinguishes confirmed drop-in replacements from merely similar controllers, helping engineers avoid selecting a 44-LQFP part whose pinout or architecture is not actually compatible.

RFQ Contact
Z86C9116FEG - 16MHz ROMless 8-Bit MCU | Zilog | Industrial
Z86C9116FEG

Z86C9116FEG - 16MHz ROMless 8-Bit MCU | Zilog | Industrial

The Zilog Z86C9116FEG is an 8-bit Z8 ROMless microcontroller operating at 16 MHz, with 236 x 8 bytes of RAM, 24 general-purpose I/O pins, and UART/USART connectivity in a 44-LQFP 10 x 10 mm surface-mount package. Its 4.5 V to 5.5 V supply range and -40°C to +105°C industrial temperature range suit embedded control systems requiring compact, deterministic communications and general-purpose I/O. The Z86C9116FEG is designed for applications that require external program memory while retaining a compact 8-bit control architecture. What is an 8-bit ROMless microcontroller? A ROMless microcontroller is a programmable embedded controller that does not contain its own program memory. Instead, the application program is stored in external memory, such as an external ROM or nonvolatile memory. This makes ROMless devices useful when the firmware must be large, frequently updated, or separately managed. The Z8 family combines an 8-bit CPU, general-purpose I/O, timers, serial communication, and external-memory interfacing in a single device. The Z86C9116FEG provides a 16 MHz operating frequency, 236 x 8 bytes of internal RAM, 24 general-purpose I/O pins, and UART/USART connectivity. Its 44-LQFP package exposes 44 leads and is intended for surface-mount PCB assembly. The 4.5 V minimum operating voltage and 5.5 V maximum operating voltage are important constraints for systems using 5 V logic. The industrial temperature range supports use in factory equipment, industrial controllers, instrumentation, and other embedded applications where consumer-temperature components may be unsuitable. The ROMless architecture separates code execution from program storage and allows the designer to select the external memory device based on code size, programming requirements, or field-update strategy. The 16 MHz clock rate provides a balance between processing throughput, power consumption, and system design simplicity for 8-bit control tasks. UART/USART support allows the controller to communicate with sensors, host systems, converters, or other embedded modules. Typical uses include industrial automation modules, serial protocol bridges, keypad and display controllers, appliance control boards, motor-control supervisory circuits, and compact embedded instruments. The 24 available I/O pins can support digital inputs, outputs, control signals, status indicators, and external interface functions when the application does not require all pins for specialized peripheral functions. Designers should verify the external-memory interface, oscillator requirements, decoupling, and the complete 44-pin signal map against the manufacturer datasheet before layout. Because the provided source data does not publish a verified pinout or pricing table, those details remain explicitly marked as unavailable in the technical records. This page combines verified distributor specifications, package information, application guidance, and purchasing considerations for engineers evaluating the Z86C9116FEG.

RFQ Contact
Z86C9116FSC 16MHz ROMless 8-Bit MCU | Zilog
Z86C9116FSC

Z86C9116FSC 16MHz ROMless 8-Bit MCU | Zilog

Zilog Z86C9116FSC is an 8-bit ROMless Z8 microcontroller operating at 16 MHz and packaged in a 44-pin LQFP measuring 10 mm by 10 mm. It provides 236 bytes of RAM, 32 I/O pins, two 8-bit timers, and a UART interface. The device combines a compact 8-bit embedded-control architecture with external program-memory support, making it suitable for cost-sensitive control systems that require dedicated application firmware. An 8-bit microcontroller is a microprocessor core, memory interface, and peripheral set integrated on one semiconductor die. The Z8 family belongs to the broader microcontroller and embedded-controller hierarchy, where firmware controls sensors, relays, user interfaces, communications, and power functions. Unlike a ROM-based device, the ROMless Z86C9116FSC requires an external program-memory device, allowing the program capacity and interface arrangement to be selected according to the finished system. The verified product information identifies a 16 MHz operating speed, 236 bytes of RAM, 32 I/O pins, two 8-bit timers, and one UART interface. These resources support basic sequential control, periodic timing, serial communication, and digital input/output tasks. The 44-LQFP package provides 44 physical leads for power, ground, clock, reset, programming, I/O, and external-memory connections, although exact lead assignments are not included in the supplied source data. The ROMless architecture is the principal engineering distinction of this Z8 device. External program memory allows firmware capacity to scale with the application, but the PCB must also provide the external memory interface, address and data routing, and associated signal-integrity measures. Designers should therefore evaluate the complete memory subsystem rather than treating the microcontroller package as a self-contained storage solution. Typical uses include small industrial controllers, appliance-control boards, keypad interfaces, communication modules, motor or relay sequencers, and compact embedded products that benefit from the Z8 instruction set and dedicated timers. External program memory is appropriate when a fixed application program must be loaded during manufacturing rather than stored in an internal ROM mask. A primary design consideration is package and memory-interface validation. Confirm the exact Z86C9116FSC pin assignment, external-memory requirements, clock configuration, and programming connection against the manufacturer documentation before layout release. Because the available verified data does not include a complete pinout or numerical distributor price schedule, those details remain explicitly unresolved rather than being inferred. This product page consolidates the verified distributor specifications, purchasing sources, package information, and engineering guidance for the Z86C9116FSC. It also distinguishes verified facts from missing electrical, pinout, pricing, and lifecycle details, helping engineers assess fit before committing to a PCB design or production order.

RFQ Contact
Z86C9116PEG - 8-Bit 16MHz ROMless MCU | Zilog
Z86C9116PEG

Z86C9116PEG - 8-Bit 16MHz ROMless MCU | Zilog

Zilog Z86C9116PEG is an 8-bit Z8 ROMless microcontroller operating at 16 MHz with a 4.5 V to 5.5 V supply range, 32 I/O ports, and a 40-pin CDIP package. It is designed for embedded control systems requiring a compact 8-bit processor, dedicated I/O capacity, and external program memory. A ROMless microcontroller is a microprocessor that contains no embedded program memory. The Z86C9116PEG therefore requires an external memory device for firmware storage, while its internal architecture supplies the central processing unit, I/O control, timers, interrupts, and communication peripherals. Within the semiconductor hierarchy, it belongs to the microprocessor and microcontroller family, specifically the Zilog Z8 product line. The principal operating characteristics are a 16 MHz clock, an 8-bit data bus, 32 I/O ports, and a 4.5 V to 5.5 V operating supply. Its industrial operating range makes it appropriate for factory equipment, instrumentation, access-control systems, and embedded controllers that require deterministic peripheral control. The 40-pin CDIP package also supports traditional through-hole assembly and prototyping workflows. The ROMless architecture separates firmware storage from the controller, allowing application code size to scale with an external memory component. This can be useful in designs that need multiple firmware variants, field-programmable logic, or a shared memory interface. The trade-off is that the board must provide an external memory device and associated address and data connections, increasing component count and PCB complexity relative to a ROM-based microcontroller. Typical applications include industrial keypad scanners, programmable timers, motor-control interfaces, serial protocol bridges, test fixtures, and compact control panels. The Z86C9116PEG is especially appropriate when a design needs more I/O than a small surface-mount controller offers but does not require the processing power or memory capacity of a 16- or 32-bit MCU. Before layout, confirm the external-memory interface requirements, reset behavior, oscillator arrangement, and available I/O functions in the Zilog Z86C9116 datasheet. Use the manufacturer pin-description table when assigning tracks because the 40-pin CDIP footprint includes both power, ground, clock, reset, I/O, and external-memory signals. This page combines core Z86C9116PEG specifications, verified sourcing information, compatible alternatives, and practical selection guidance to help engineers evaluate the controller for legacy and new embedded-control designs.

RFQ Contact
Z86C9116PSG - 16MHz 8-Bit ROMless MCU | Zilog
Z86C9116PSG

Z86C9116PSG - 16MHz 8-Bit ROMless MCU | Zilog

Zilog Z86C9116PSG is an 8-bit Z8 ROMless microcontroller operating at 16 MHz with a 4.5 V to 5.5 V supply range, 236 bytes of RAM, 32 I/O ports, and a 40-pin PDIP package. It belongs to the Z86C91 product family and requires an external program-memory device because no internal ROM is provided. An 8-bit ROMless microcontroller is a compact embedded-control processor designed for systems that require deterministic I/O handling rather than application storage inside the MCU. In the product hierarchy, the Z86C9116PSG is a microcontroller, an embedded processor, and a semiconductor integrated circuit. Its ROMless architecture separates program memory from the controller, allowing designers to select external storage according to firmware size and interface requirements. The headline features include a 16 MHz operating clock, an 8-bit data bus, 236 bytes of on-chip RAM, and 32 I/O ports. The 4.5 V to 5.5 V supply range supports conventional 5 V industrial embedded systems. Because the MCU is ROMless, an external program-memory device is required, while the 236 bytes of internal RAM provide limited working memory for variables, stack operations, and control-state management. The Z86C9116PSG uses the Z8 architecture and is positioned as a compact, low-cost controller for embedded products requiring parallel digital I/O. Its 40-pin PDIP package provides a comparatively large number of external connections compared with smaller surface-mount MCUs, making it practical for prototyping, through-hole industrial assemblies, and applications that need direct access to peripheral pins. Typical uses include appliance controllers, industrial sequencers, keyboard or panel interfaces, lighting-control modules, instrumentation, and small embedded automation systems. The 32 I/O ports are particularly useful when a design must connect multiple switches, indicators, sensors, or actuators without relying on additional interface expanders. When designing around this device, engineers must account for the absence of internal program memory and provide a suitable external memory implementation. The available verified data does not specify the external-memory interface, exact pin assignments, peripheral mix, or detailed timing characteristics, so those items should be confirmed in the manufacturer datasheet before schematic capture. This product page consolidates distributor availability, verified pricing, device hierarchy, package information, and same-brand replacement analysis. It also distinguishes directly documented drop-in candidates from alternatives that cannot be verified as pin-to-pin compatible, helping engineers avoid replacing an MCU solely because the clock speed and package description look similar.

RFQ Contact
Z86C9116VEG - 16MHz ROMless 8-Bit MCU | Zilog
Z86C9116VEG

Z86C9116VEG - 16MHz ROMless 8-Bit MCU | Zilog

The Zilog Z86C9116VEG is an 8-bit ROMless CMOS microcontroller operating at 16 MHz with a 4.5 V to 5.5 V supply range. It provides an 8-bit data bus, 32 I/O ports, and an industrial operating range. The part is identified as a DIP-40 device in the technical listing, making it suitable for designs that require a through-hole controller with external program memory. As a ROMless microcontroller, the Z86C9116VEG requires an external program-memory device connected through its address and data buses. This architecture separates code storage from the controller and allows the program size to be selected during system design. The 16 MHz operating speed provides a practical balance between processing throughput, power consumption, and external-memory access time for cost-sensitive embedded control systems. The listed electrical characteristics include a 4.5 V minimum operating supply and a 5.5 V maximum operating supply. An 8-bit external data bus supports connection to external program memory, while the 32 available I/O ports provide dedicated digital interfaces for sensors, switches, indicators, relays, and peripheral control signals. The device operates in the industrial temperature range, supporting industrial control and instrumentation environments. Because the device is ROMless, the complete memory system depends on the external memory interface, address decoding, and firmware initialization sequence. Board designers should confirm the external bus timing and address map against the manufacturer datasheet before layout release. Decoupling, grounding, and unused-pin treatment are equally important for reliable operation in a through-hole industrial design. Typical uses include industrial controllers, data-acquisition modules, keypad interfaces, motor-control sequencers, appliance controllers, and embedded instrumentation. The DIP-40 format also supports prototyping and legacy system maintenance where socketed parts and hand-wiring are common. This page combines lifecycle information, verified distributor listings, pin-package details, application guidance, and engineering notes to support component selection and board-level planning for the Z86C9116VEG.

RFQ Contact
Z86C9116VSG - 16MHz 8-Bit ROMless MCU | Zilog
Z86C9116VSG

Z86C9116VSG - 16MHz 8-Bit ROMless MCU | Zilog

The Zilog Z86C9116VSG is an 8-bit Z8 ROMless microcontroller with a 16 MHz clock speed, 32 I/O ports, and a 44-pin PLCC package. Its 4.5 V to 5.5 V supply-voltage range supports industrial control systems that use a conventional 5 V power rail. The ROMless architecture requires an external program-memory device, while the integrated 32-port I/O capability reduces the number of companion interface ICs needed in small embedded systems. An 8-bit microcontroller is a compact processor designed around a byte-oriented architecture, embedded control peripherals, and direct digital input/output. The Z8 family sits within the broader hierarchy of microcontrollers, embedded processors, and semiconductor components. Compared with a general-purpose processor, this device focuses on deterministic control tasks, communication peripherals, timers, and externally accessed program and data memory rather than operating-system performance or high-bandwidth computation. Principal features include ROMless operation, an 8-bit data bus, a 16 MHz maximum clock, and 32 I/O ports. The 44-pin PLCC package provides enough connections for external memory interfaces, parallel I/O, control signals, and clock or reset support. Because the device has no internal program memory, system access must include suitable external memory and address, data, and control wiring. The 4.5 V minimum supply voltage also leaves less headroom for low-voltage operation than 3.3 V-oriented microcontrollers. The Z86C9116VSG belongs to the Zilog Z86C91 family and uses the Z8 architecture. Its ROMless design provides flexibility for applications that require firmware upgrades, field-configurable control logic, or program storage in a separate nonvolatile device. At the same time, external memory introduces address-decoding and bus-timing requirements that must be considered during schematic design and PCB layout. The 16 MHz operating speed provides sufficient instruction throughput for typical embedded sequencing, data acquisition, keypad, display, actuator, and industrial automation tasks. Typical uses include programmable logic controllers, industrial controllers, instrumentation panels, keyboard scanners, LED or display sequence controllers, data-acquisition systems, and compact embedded automation equipment. The 32 I/O ports are especially useful for machines requiring numerous digital inputs and outputs, while external program memory allows application firmware to be sized independently of the microcontroller package. A critical design consideration is the ROMless implementation. Route the external memory bus cleanly, preserve the timing margin required by the Z8 bus interface, and include the required clock and reset components. Keep sensitive analog or communication circuitry away from high-current memory outputs, and validate signal integrity across all board lengths and temperature conditions. This page consolidates the key electrical ratings, package identity, sourcing considerations, and drop-in comparison candidates for the Z86C9116VSG. It also highlights the practical trade-offs involved in retaining the Z8 platform, especially external-memory requirements, package availability, and the difference between a true pin-compatible replacement and a merely similar controller.

RFQ Contact
Z86C9320ASG - 8-Bit 20MHz ROMless MCU | Zilog
Z86C9320ASG

Z86C9320ASG - 8-Bit 20MHz ROMless MCU | Zilog

The Zilog Z86C9320ASG is an 8-bit Z8 ROMless microcontroller rated for operation up to 20 MHz and supplied in a 44-LQFP package measuring 10 mm by 10 mm. It belongs to the Z86C93 controller family and includes a hardware multiplier, a divider, and three 16-bit counter timers for embedded-control workloads that require more arithmetic capability than a basic 8-bit core. An 8-bit microcontroller is a compact embedded-processing component intended to execute firmware, read inputs, control outputs, and manage communication or timing functions in a larger electronic system. Within the embedded hierarchy, this device belongs to the microcontrollers category and uses the Z8 architecture. Because Z86C9320ASG is ROMless, its program memory must be supplied externally rather than being integrated into the device. The Z86C9320ASG combines a 20 MHz maximum clock with a hardwired 16-bit-by-16-bit multiplier, a 32-bit-by-16-bit divider, and three 16-bit counter timers. The multiplier supports efficient arithmetic in motor-control, measurement, and signal-processing routines, while the divider supports frequency and scaling calculations. These dedicated hardware resources reduce the execution burden placed on the 8-bit processor during time-sensitive control operations. The device also provides a capture register and a fast decrement mode, expanding the available event-timing options for industrial controls, counters, and timing-sensitive embedded products. The 44-LQFP package exposes 44 external connections and supports conventional surface-mount PCB assembly. Its 10 mm by 10 mm body is larger than the smallest microcontroller packages but provides a practical pin count for peripheral connections and multi-signal interfaces. Typical design roles include industrial control, digital instrumentation, motor and stepper-control systems, timing modules, and compact embedded controllers. Its dedicated arithmetic and timer resources are particularly useful when the firmware must multiply measurements, divide frequencies, count external events, or coordinate multiple timing sequences without relying entirely on software loops. For a new design, confirm oscillator, reset, clock, programming, interrupt, and I/O assignments against the manufacturer pin description before laying out the PCB. Because this is a ROMless microcontroller, the external memory interface, associated address and data routing, and programming arrangement can materially affect both routing complexity and board-space requirements. This product page combines the manufacturer-family characteristics, package information, source pricing context, cross-reference findings, and practical design considerations needed to evaluate the Z86C9320ASG. It also distinguishes verified drop-in replacements from functionally related 8-bit controllers that require separate pin, clock, memory, and peripheral validation.

RFQ Contact
Z86C9320FSC 8-Bit 20MHz ROMless MCU 44-LQFP | Zilog
Z86C9320FSC

Z86C9320FSC 8-Bit 20MHz ROMless MCU 44-LQFP | Zilog

The Zilog Z86C9320FSC is an 8-bit Z8 ROMless microcontroller operating at up to 20 MHz in a 44-LQFP package measuring 10 x 10 mm. It provides 236 KB of RAM, 24 I/O pins, three 8-bit timers, and a UART communication interface. Z86C9320FSC is intended for embedded control designs where external program memory is required and a compact, high-pin-count surface-mount implementation is preferred. An 8-bit microcontroller is a programmable semiconductor device designed to execute embedded control logic using an 8-bit data path. The Z86C9320FSC belongs to the Z8 family of Zilog microcontrollers and is a ROMless device, meaning the application program is stored in external memory rather than embedded program ROM. This architecture separates the controller from the program memory, allowing the memory device to be selected according to application capacity, interface, and cost requirements. The principal verified specifications are a maximum operating speed of 20 MHz, 236 KB of RAM, 24 I/O, three 8-bit timers, one UART interface, and a 44-LQFP package. The package provides 44 terminals for power, clock, reset, communications, timers, interrupts, general-purpose I/O, and external-memory connections. The reported speed options include 20 MHz, 25 MHz, and 33 MHz, while the distributor listing identifies the Z86C9320FSC specifically as a 20 MHz ROMless device. The ROMless architecture is useful for applications that need larger or field-updatable firmware than a fixed-program microcontroller normally provides. External program-memory selection must account for bus timing, address capacity, signal integrity, and the controller's documented external-memory interface. The Z86C9320FSC should therefore be evaluated as a system component rather than only as a standalone MCU. Typical application areas include industrial control panels, serial-control equipment, building automation modules, data-acquisition controllers, motor-control interfaces, and embedded communication products. A UART provides a practical path for host configuration, sensor networking, or supervisory control, while the three timers support periodic timing, input capture, or basic output-control functions depending on the complete peripheral configuration. A critical design consideration is firmware availability: because this device is ROMless, the PCB must include an appropriate external memory solution and correct bus support components. Engineers should verify the complete Zilog documentation for electrical limits, pin assignments, memory-interface timing, clock requirements, and programming procedure before releasing a production layout. This page consolidates verified distributor specifications, package information, sourcing details, and engineering-oriented application guidance. It also distinguishes documented facts from parameters that require confirmation from the manufacturer datasheet, helping designers compare the Z86C9320FSC efficiently without assuming unavailable electrical details.

RFQ Contact
Z86C9320VSG - 8-Bit 20MHz ROMless MCU | Zilog
Z86C9320VSG

Z86C9320VSG - 8-Bit 20MHz ROMless MCU | Zilog

The Zilog Z86C9320VSG is an 8-bit Z8 Z8 C93-series ROMless microcontroller operating at up to 20 MHz, with 236 bytes of RAM and multiply/divide capability in a 44-pin PLCC package. It is designed for embedded control systems requiring a compact processor, parallel and serial control peripherals, and externally supplied program memory. A ROMless microcontroller is a semiconductor that contains a processor core and peripheral hardware but omits embedded program memory. Zilog's Z8 family sits within the broader 8-bit microcontroller hierarchy, where the CPU core, timers, serial interfaces, interrupt controller, and external memory interface provide a compact alternative to a general-purpose processor. Z86C9320VSG is identified as a C93-series device, making it appropriate for legacy Z8 control architectures and designs requiring external program-memory organization. The headline characteristics are an 8-bit CPU, a 20 MHz maximum clock, 236 bytes of RAM, ROMless operation, multiply/divide arithmetic, and a 44-pin PLCC package. Its external-memory architecture allows the final firmware capacity to be established with suitable memory devices rather than a fixed internal ROM. The 44-pin PLCC also provides a substantial pin count for interfacing external program memory and the peripheral signals needed by embedded industrial equipment. Z86C9320VSG belongs to the Zilog Z86C93 device family. The ROMless configuration is useful when application firmware must remain in external nonvolatile memory, when production code revisions need a flexible memory strategy, or when a board family must share one processor and support several memory sizes. The processor's 20 MHz operating rate supports deterministic control logic, while the multiply/divide function is useful for scaling, compensation, and basic arithmetic tasks that would otherwise require software routines. Typical applications include industrial controllers, legacy peripheral-control boards, motor and mechanism controllers, instrumentation interfaces, and embedded systems that already use the Z8 C93 architecture. In these systems, external program memory can hold firmware while the microcontroller manages timing, communications, and I/O. The PLCC package is also appropriate for leaded, socket-compatible industrial hardware and prototypes where field replacement or component-level servicing may be important. Designers should verify the external memory interface, interrupt requirements, peripheral assignments, and pin multiplexing in the Zilog device documentation before layout release. Because the MCU is ROMless, the complete system must include suitable external program memory and the associated address, data, and control routing. A practical advantage is the flexible firmware-memory sizing, while the main trade-off is the additional board area and component count compared with a ROM-based microcontroller. This page consolidates the verified Z86C9320VSG device identity, package information, sourcing context, replacement analysis, and engineering guidance into a design-oriented reference. It also distinguishes verified drop-in interchangeability from unreferenced similarity so engineers can assess PCB reuse and migration risk with greater clarity.

RFQ Contact
Z86C9325ASG - 8-Bit 25 MHz ROMless MCU | Zilog
Z86C9325ASG

Z86C9325ASG - 8-Bit 25 MHz ROMless MCU | Zilog

Zilog Z86C9325ASG is an 8-bit CMOS ROMless Z8 microcontroller operating at 25 MHz, supplied in a 48-pin LQFP package measuring 7 x 7 mm. It operates from a 3 V to 5.5 V supply and is designed for embedded control systems that require deterministic timer, arithmetic, and input/output performance in a compact surface-mount package. A microcontroller is a programmable system-on-chip that integrates a processor core, memory interface, timers, serial interfaces, and digital I/O into one device. The Z8 family belongs to the broader embedded-controller hierarchy: ROMless microcontrollers are programmed externally, allowing the same silicon to be used with different program memories or configurations. This makes them useful when a product requires field customization, external nonvolatile program storage, or a memory arrangement not addressed by the MCU's own program memory. The Z86C93 family includes a hardwired 16-bit by 16-bit multiplier, a 32-bit by 16-bit divider, and three 16-bit counter timers. A capture register and fast decrement mode improve measurement and event-handling flexibility. These arithmetic and timing resources are valuable for motor control, industrial counting, signal timing, and compact embedded controllers that must perform calculations without relying on a more complex processor architecture. The 25 MHz operating rate provides more execution headroom than slower members of the Z86C93 family while retaining an 8-bit instruction-oriented architecture. Program storage is external because the device is ROMless, so designers must select the appropriate memory interface, programmer, and code-development workflow. Firmware determines the final peripheral configuration and application behavior, meaning successful implementation depends on matching the external program-memory device and bus timing to the controller requirements. Typical applications include industrial timers, counter modules, keypad and display controllers, appliance controls, small motor-control boards, and embedded OEM products requiring compact 8-bit control. The 48-pin LQFP package exposes more I/O than smaller packages and supports prototype and production assembly using standard surface-mount processes. It is particularly appropriate where three timers and dedicated arithmetic hardware simplify control tasks that would otherwise require additional discrete logic. For layout and firmware work, begin with the manufacturer pin-description table and the Z86C93 hardware design guidance. Confirm external program-memory addressing, oscillator connections, reset behavior, and the functions assigned to every I/O pin before routing the board. Pay particular attention to trace length, grounding, and decoupling around high-frequency clock and program-bus signals because those routes determine whether the intended 25 MHz operation is reliable in the final assembly. This product overview combines the verified Z86C93 device characteristics with practical guidance on package use, firmware resources, and board integration. It also identifies the limits of direct substitution: an equivalent-looking 8-bit microcontroller is not a true drop-in replacement unless its package pins, electrical ratings, timer resources, instruction behavior, and external memory interface are all confirmed compatible.

RFQ Contact
Z86C9325PSG - 25MHz ROMless 8-Bit MCU | Zilog
Z86C9325PSG

Z86C9325PSG - 25MHz ROMless 8-Bit MCU | Zilog

Zilog, Inc. Z86C9325PSG is a ROMless 8-bit Z8 microcontroller with a 25 MHz core clock, 236 x 8 bytes of RAM, 24 general-purpose I/O pins, and a 40-pin DIP package. Its operating-voltage range is 3 V to 5.5 V, and its integrated interfaces include EBI/EMI and UART/USART connectivity. The device is designed for embedded control systems that require external program memory and flexible peripheral expansion. A ROMless microcontroller is an embedded controller whose application program is stored in external memory rather than internal mask-programmable ROM. This architecture belongs to the broader hierarchy of microcontroller, embedded processor, embedded controller, and semiconductor. It is useful when firmware revisions, external memory sizing, or shared program storage are important. Zilog's Z8 family combines an 8-bit CPU with integrated peripherals intended for control, communications, and mixed external-memory designs. Key features include a 25 MHz operating speed, 24 general-purpose I/O pins, 236 bytes of internal RAM, an internal oscillator, and serial and external-bus interfaces. The ROMless architecture allows the program-memory implementation to be selected separately from the microcontroller. Its 3 V to 5.5 V supply range supports both 3.3 V and conventional 5 V embedded systems, although designers must observe the operating limits associated with each clock and peripheral configuration. The Z86C9325PSG architecture is organized around an 8-bit Z8 core and an external program-memory interface. EBI/EMI provides access to external devices, while UART/USART supports serial communication with sensors, host computers, and other controllers. The 24 I/O pins allow a prototype to connect digital inputs, output devices, and address or data-bus signals. Exact pin directions, interrupt behavior, and memory-interface timing should be confirmed from the manufacturer datasheet before a PCB is released. Typical uses include industrial keypad controllers, appliance control modules, serial protocol bridges, programmable instrument interfaces, and embedded systems that benefit from externally updatable or shared program memory. Because the controller is ROMless, firmware can be stored in flash, SRAM, or another suitable external memory, allowing programmers to separate hardware configuration from application code. The principal design consideration is the external-memory interface. Board layout should minimize trace lengths between the Z86C9325PSG and external memory, provide a stable clock and supply network, and preserve signal-integrity margins on the external bus. Power-supply decoupling and input protection should be sized for the attached memory and peripheral loads rather than assuming that the microcontroller alone determines the demand. This product overview consolidates the verified core specifications, interface capabilities, package information, application guidance, and sourcing questions for engineers evaluating the Z86C9325PSG. It also distinguishes documented device facts from parameters that require confirmation in the manufacturer datasheet before layout or firmware deployment.

RFQ Contact