Products (21,000+)

XMC4400F64K512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64K512BAXQMA1

XMC4400F64K512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4400F64K512BAXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 512 KB of flash memory, 80 KB of RAM, and an Ethernet MAC, all housed in a 64-pin LQFP package. The XMC4400 combines a high-performance microcontroller core with advanced motor-control peripherals, including a high-resolution PWM unit capable of 150 ps resolution. An Arm Cortex-M4 microcontroller is a 32-bit embedded processor in the microcontroller family, where the Arm Cortex-M core sits between a general-purpose microprocessor and a highly integrated embedded control device. The XMC4400 belongs to Infineon's XMC4000 industrial microcontroller family, combining real-time digital control with communication and analog-adjacent peripheral functions on one integrated circuit. Key device features include a 120 MHz Cortex-M4 core, 512 KB of program flash, 80 KB of RAM, an integrated Ethernet MAC, and a 64-pin PG-LQFP package. The 150 ps high-resolution PWM capability supports precision timing in motor-control and power-conversion systems. The combination of Ethernet connectivity and deterministic control peripherals makes the device suitable for industrial automation, networking, and embedded motor-control designs. Technically, the XMC4400 integrates an ARM Cortex-M4 processor with Infineon's peripheral set. Its high-resolution PWM and advanced timer architecture are intended to reduce the need for external timing and signal-generation components. The Ethernet MAC supports network-oriented industrial equipment, while the flash and RAM capacities provide sufficient space for control firmware, communication stacks, and application logic. Typical applications include industrial Ethernet controllers, servo and motor drives, programmable logic controllers, industrial communication modules, and embedded automation equipment. The 120 MHz processing rate supports responsive control loops, while the Ethernet MAC provides a path to connected factory networks. System designers must still verify peripheral assignments, package dimensions, pin multiplexing, and operating limits against the complete manufacturer datasheet before schematic release. A primary design consideration is firmware and peripheral planning. Because the LQFP-64 package exposes a finite number of pins, pin multiplexing, analog functions, debug access, clock configuration, and Ethernet connectivity must be assigned early. PCB designers should also follow the manufacturer's recommended decoupling, exposed-pad, and high-speed layout guidance before a new board is fabricated. This product data combines the verified manufacturer and distributor information with practical comparison notes and engineering guidance that are not presented as a substitute for the complete Infineon XMC4400 datasheet. Exact electrical characteristics, pricing, lead time, lifecycle status, and package details should be confirmed against the latest manufacturer documentation and distributor records.

RFQ Contact
XMC4402F64F256ABXQMA1 - 120MHz Cortex-M4 256KB Flash MCU
XMC4402F64F256ABXQMA1

XMC4402F64F256ABXQMA1 - 120MHz Cortex-M4 256KB Flash MCU

The Infineon XMC4402F64F256ABXQMA1 is a 32-bit single-core ARM Cortex-M4 microcontroller operating at 120 MHz, with 256 kByte of flash memory, 80 kByte of SRAM, and 10/100 Ethernet connectivity in a 64-pin PG-LQFP-64-19 package with an exposed pad. It belongs to the Infineon XMC4000 series for industrial applications and combines real-time microcontroller control with an integrated Ethernet interface. A microcontroller is a programmable system-on-chip containing a CPU core, memory, peripherals, and communication interfaces. Within the product hierarchy, this device is an ARM Cortex-M4 microcontroller, an embedded processor, an integrated circuit, and ultimately a semiconductor. The XMC4000 family is designed for industrial control systems where deterministic execution, Ethernet connectivity, and a relatively large embedded memory footprint are more important than the power density of a small sensor node. Three headline characteristics define this part. The 120 MHz Cortex-M4 core provides 32-bit processing with integrated floating-point instruction support. The 256 kByte program flash supplies room for a bootloader, application firmware, and network configuration, while 80 kByte of SRAM supports working buffers, protocol stacks, and control data. The integrated 10/100 Ethernet interface allows the controller to participate directly in industrial Ethernet networks without a separate interface controller. The XMC4402F64F256ABXQMA1 is identified as an industrial-grade XMC4000-series member. Its PG-LQFP-64-19 mechanical format provides 64 leads plus a thermal exposed pad, offering a larger pin count than small-outline packages and practical access to mixed-signal, communications, and digital I/O resources. The verified distributor listing confirms single-core operation, 120 MHz clocking, 256 kByte flash, and 3.3 V supply information. Additional detailed timing, peripheral, and absolute-maximum parameters must be confirmed in the manufacturer datasheet before a new design is released. Typical applications include industrial Ethernet controllers, programmable logic controllers and automation equipment, networked motor and process controllers, industrial communication gateways, and embedded test systems. For Ethernet-connected control equipment, the combination of Cortex-M4 processing, 80 kByte SRAM, and integrated 10/100 Ethernet reduces the external component count compared with a discrete Ethernet-interface architecture. Engineers should still budget memory margin for the selected protocol stack and application firmware. The most important design consideration is thermal management around the exposed pad. The LQFP package requires a land pattern that connects the thermal pad to a properly sized ground or thermal copper plane; a datasheet-based thermal design should verify the junction and ambient temperature limits under the maximum operating clock and Ethernet activity. The 3.3 V operating point should also be checked against every attached peripheral, level-shifting interface, and supply tolerance. This page combines the verified Infineon and distributor specifications with practical selection guidance, pin-package details, application analysis, and same-package replacement information that is not normally consolidated on a distributor listing. It distinguishes documented facts from parameters that still require confirmation from the manufacturer datasheet, helping engineers evaluate the XMC4402F64F256ABXQMA1 efficiently without treating unverified generic MCU specifications as fact.

RFQ Contact
XMC4402F64F256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4402F64F256BAXQMA1

XMC4402F64F256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon XMC4402F64F256BAXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller operating at up to 120 MHz, with 256 kByte of flash memory, 80 kByte of SRAM, and 10/100 Ethernet connectivity in a PG-LQFP-100-25 package. It combines a high-performance 32-bit processor core with an Ethernet interface, high-resolution PWM, and an extensive peripheral set for industrial control applications. An industrial microcontroller is a semiconductor device designed to execute embedded control logic, communicate with external equipment, and operate reliably in industrial environments. The XMC4000 family combines the Arm Cortex-M4 processor architecture with Ethernet, timers, analog and digital interfaces, and embedded flash and SRAM. This places it within the hierarchy of embedded processor, microcontroller, industrial control IC, and semiconductor. The XMC4402F64F256BAXQMA1 provides 256 kByte of flash for program storage and 80 kByte of SRAM for working memory. Its processor operates at up to 120 MHz, while the high-resolution PWM unit offers 150 ps resolution for precision timing and motor-control tasks. Integrated 10/100 Ethernet support reduces the component count required for network-connected industrial equipment. The Arm Cortex-M4 architecture supports efficient real-time control while retaining a broad embedded software ecosystem. Peripheral resources such as high-resolution PWM, communication interfaces, and Ethernet position the device for motor control, industrial networking, automation controllers, and connected embedded systems. The 150 ps PWM resolution is particularly useful when the application depends on accurate edge positioning rather than only a conventional timer period. Typical uses include EtherCAT or Ethernet-based factory automation equipment, servo and motor-control systems, industrial communication gateways, programmable logic controllers, and networked sensor-control modules. For designs requiring a 3.3 V operating rail, the device can support a compact controller architecture while combining local real-time processing with Ethernet connectivity. Designers should follow the manufacturer’s pin, power, decoupling, clock, and exposed-pad guidance when laying out the PG-LQFP-100-25 package. The exposed thermal pad requires a properly designed land pattern and thermal-via arrangement if heat must be removed from the device. Firmware should also validate the selected clock, Ethernet physical interface, and peripheral pin multiplexing before production release. This product record combines the manufacturer’s XMC4402-F64F256-BA characteristics with orderable MPN context, useful application guidance, and explicit design cautions. It helps engineers distinguish confirmed memory, connectivity, package, and timing attributes from details that must be checked in the manufacturer datasheet before schematic or PCB signoff.

RFQ Contact
XMC4402F64K256ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4402F64K256ABXQSA1

XMC4402F64K256ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4402F64K256ABXQSA1 is a 32-bit single-core Arm Cortex-M4 microcontroller operating at 120 MHz, with 256 KB of programmable Flash memory and a 64-pin PG-LQFP-19 package with exposed pad. It belongs to the XMC4000 industrial microcontroller family and includes an Ethernet MAC rated for 10/100 communication. The 256K × 8 Flash organization provides dedicated code and data storage for connected industrial-control equipment. An Arm Cortex-M4 microcontroller is a 32-bit embedded processor based on the Armv7-E architecture. Microcontrollers integrate a processor core, Flash memory, SRAM, interrupt control, timers, communication peripherals, and general-purpose I/O into one device. Within the semiconductor hierarchy, this MCU belongs to the embedded-microcontroller category and provides a compact platform for industrial automation, networking, motor control, and real-time control systems. The principal device characteristics visible in manufacturer and distributor records include a 120 MHz Cortex-M4 core, 256 KB Flash memory, 32-bit architecture, single-core operation, and a 64-pin LQFP package. The Ethernet capability makes the device suitable for connecting embedded equipment to 10/100 networks. Its package also includes an exposed thermal pad intended to improve heat transfer from the device to the PCB. The XMC4000 architecture combines real-time control capability with Ethernet connectivity. A 120 MHz Cortex-M4 core can execute control logic and communication tasks, while integrated peripherals reduce the need for discrete interface components. Designers should consult the XMC4402 datasheet and device pin-description tables for the exact peripheral mix, RAM configuration, I/O assignments, electrical limits, clock requirements, and package dimensions before finalizing a PCB. Typical uses include industrial Ethernet controllers, factory automation nodes, building automation equipment, networked sensors, motor-control systems, and communications gateways. These applications benefit from the combination of embedded Flash, a high-frequency 32-bit core, and 10/100 Ethernet MAC support. Exact protocol availability and performance should be confirmed against the selected order code and its manufacturer documentation. PCB implementation requires careful decoupling, a correctly configured clock network, and unobstructed thermal coupling to the exposed pad. Follow the manufacturer reference layout, place required capacitors close to their supply pins, route high-speed signals according to the recommended guidelines, and verify the assembled design across voltage and temperature limits. This page combines manufacturer identification, distributor specifications, strict package-aware substitution guidance, application analysis, and practical design notes. It is intended to help engineers evaluate the XMC4402F64K256ABXQSA1 for an existing 64-LQFP industrial design before obtaining detailed electrical and pin-level documentation.

RFQ Contact
XMC4402F64K256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4402F64K256BAXQMA1

XMC4402F64K256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4402F64K256BAXQMA1 is a 32-bit ARM Cortex-M4 industrial microcontroller with a 120 MHz core, 256 KB of flash memory, and a 64-pin LQFP package. The XMC4000-series device combines real-time control capability with an integrated 10/100 Ethernet MAC, high-resolution PWM, and an extended peripheral set for industrial automation, networking, motor-control, and embedded communications systems. A microcontroller is a compact semiconductor system that integrates a CPU core, program memory, data memory, peripherals, and communication interfaces on one package. The ARM Cortex-M4 architecture belongs to the microcontroller class and provides deterministic instruction execution, DSP-oriented instructions, and hardware floating-point support. The XMC4400 family extends this foundation with Infineon peripherals designed for industrial real-time control and connected equipment. The XMC4402F64K256BAXQMA1 operates at 120 MHz and provides 256 KB of flash organized as 256K x 8. Its high-resolution PWM unit offers a stated resolution of 150 ps, supporting precise timing-sensitive power conversion and motor-control systems. The integrated Ethernet MAC adds 10/100 communications capability without requiring a separate interface controller. The device is identified as an industrial-grade member of the XMC4400 family. The XMC4400 architecture integrates multiple peripheral domains suited to deterministic embedded control. Its communication and timing resources can support industrial Ethernet, while the high-resolution PWM and fast-control peripherals reduce reliance on software timing loops. The 256 KB embedded flash provides room for bootloader, application, and configuration code, while the Cortex-M4 processor supports efficient signal-processing and control workloads. Typical uses include industrial PLC peripheral modules, factory automation controllers, Ethernet-connected data acquisition equipment, variable-frequency motor drives, power-conversion controllers, building automation nodes, and real-time communication gateways. For designs requiring a deterministic Ethernet connection, the integrated 10/100 Ethernet MAC can be paired with a suitable Ethernet transceiver and magnetic interface. Designers should verify the complete pin-level electrical configuration, exposed-pad connection, clock requirements, memory organization, and peripheral multiplexing against the official Infineon documentation before layout release. The LQFP-64 land pattern must follow the manufacturer package drawing, and decoupling should be placed close to the supply pins. Firmware should also validate reset, clock, Ethernet PHY, and startup sequencing for the selected board design. This page combines verified manufacturer and distributor information with an honest engineering comparison, practical integration guidance, and clearly identified data gaps. It distinguishes confirmed XMC4400-family capabilities from unverified details so procurement and hardware teams can evaluate the MCU without relying on invented specifications or unsafe replacement assumptions.

RFQ Contact
XMC4500-F144F1024AB - 120MHz Cortex-M4 MCU | Infineon
XMC4500-F144F1024AB

XMC4500-F144F1024AB - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4500-F144F1024AB is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 family, operating at 120 MHz with 1 MB of flash memory and 160 kByte of SRAM. The device is packaged in a 144-pin PG-LQFP-18 industrial package and is intended for connected industrial control, industrial Ethernet, power conversion, and sense-and-control systems. Its combination of Ethernet connectivity, configurable peripherals, and deterministic microcontroller processing supports compact embedded platforms that need communications and control in one device. An ARM Cortex-M4 microcontroller is a reduced-instruction-set processor-based embedded controller used for real-time control, communications, and signal-processing tasks. The XMC4000 family combines a standard ARM processor core with Infineon peripherals for industrial connectivity, control, and power-management designs. This makes the XMC4500 suitable when a system needs more than a basic GPIO controller, especially where Ethernet and deterministic control must share one microcontroller platform. The verified product information identifies a 120 MHz operating frequency, 1 MB flash, 160 kByte SRAM, Ethernet connectivity, and a 144-pin PG-LQFP-18 package. The family description also identifies configurable peripherals, allowing application-specific tailoring. The 1 MB flash provides room for networking stacks, control software, diagnostics, and application logic, while the 160 kByte SRAM supports working memory for protocol and control tasks. The XMC4500 is positioned for industrial communication and control applications where an Ethernet-capable MCU can reduce component count by integrating network communication with local control. The Cortex-M4 architecture provides a familiar embedded software ecosystem, while the family peripheral set is designed for industrial connectivity, power conversion, and sense-and-control use cases. Exact electrical limits, pin functions, timing values, and temperature limits require the Infineon XMC4500 datasheet. Typical applications include industrial Ethernet gateways, programmable automation controllers, motor and power-conversion control, industrial sensor nodes, and connected measurement equipment. For designs requiring deterministic response, the MCU can process local control loops while Ethernet handles supervisory communication, diagnostics, and configuration. The verified data does not provide a complete application-specific peripheral map for this exact orderable MPN, so firmware engineers should verify pin multiplexing and peripheral availability in the manufacturer datasheet before schematic capture. A key design consideration is package and firmware verification. The target is a 144-pin industrial package, so PCB land patterns, exposed-pad or thermal requirements, pin multiplexing, clock configuration, and power sequencing must be checked against the exact datasheet. This page synthesizes the verified manufacturer and distributor information, available cross-reference results, package identity, application context, and engineering guidance; missing orderable-specific data is explicitly marked rather than estimated. The Infineon XMC4500-F144F1024AB is a 120 MHz ARM Cortex-M4 industrial microcontroller with Ethernet, 1 MB flash, 160 kByte SRAM, and a 144-pin PG-LQFP-18 package.

RFQ Contact
XMC4500-F144K1024 - 120MHz Cortex-M4 1MB Flash MCU | Infineon
XMC4500-F144K1024

XMC4500-F144K1024 - 120MHz Cortex-M4 1MB Flash MCU | Infineon

The Infineon XMC4500-F144K1024 is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 series, combining a 120 MHz processor core with 1024 kByte of embedded flash and 160 kByte of SRAM in a 144-pin PG-LQFP package. Industrial connectivity microcontrollers such as the XMC4500 sit between general-purpose embedded processors and highly specialized control devices. They combine an Arm Cortex-M4 instruction set with configurable peripherals for communications, timing, analog conversion, and industrial control, allowing one controller to supervise power conversion, sensing, fieldbus communication, and safety-related monitoring functions. The XMC4500 integrates Ethernet connectivity alongside the XMC4000 peripheral family, and its 1024 kByte of flash supports larger protocol stacks, application firmware, and field-upgrade capability than smaller 32-bit microcontrollers. The 160 kByte of SRAM provides working memory for packet buffers, control loops, and communication tasks. The 144-pin PG-LQFP-18 package provides a substantial peripheral count and power-management connectivity for industrial control boards. According to the manufacturer datasheet, the XMC4500 series targets industrial connectivity, industrial control, power conversion, and sense-and-control systems. Its configurable peripheral set allows designers to tailor the controller to application requirements instead of relying on a fixed combination of unused functions. The 120 MHz Cortex-M4 core and integrated Ethernet interface make the device suitable for connected motor controllers, power-conversion equipment, and industrial automation gateways. Designers should pay attention to the exact ordering suffix, flash density, package type, and temperature-grade requirements when comparing XMC4500 variants. The verified distributor listings identify the related -AC, -AB, and -AA order codes, while the manufacturer documentation provides the authoritative electrical and ordering details. For the target suffix, confirm the package pin count, exposed-pad connections, and production availability before layout release. This page consolidates manufacturer datasheet links, distributor records, package information, and practical selection guidance for the XMC4500-F144K1024. It highlights where related XMC4500 order codes are useful references and where a PCB redesign is required, helping engineers evaluate drop-in replacement risk before committing a new design.

RFQ Contact
XMC4500E144F1024ACXQSA1 120MHz Cortex-M4 1MB MCU
XMC4500E144F1024ACXQSA1

XMC4500E144F1024ACXQSA1 120MHz Cortex-M4 1MB MCU

Infineon Technologies XMC4500E144F1024ACXQSA1 is an industrial ARM Cortex-M4 microcontroller with a 120 MHz CPU, 1 MB of flash memory, and 160 KB of SRAM in a 144-pin LFBGA-144-10 package. The device belongs to the XMC4000 family and is designed for embedded industrial applications requiring real-time control, Ethernet connectivity, and a broad peripheral set. It operates from a 3.3 V supply according to distributor and manufacturer product information, with an industrial temperature rating of -40 °C to +85 °C. The XMC4500 combines an ARM Cortex-M4 processor core with Infineon’s configurable peripheral set. This architecture places a general-purpose microcontroller, memory, communication interfaces, timing resources, and analog or digital peripherals into one device. The 120 MHz execution rate supports demanding control loops and connected industrial equipment, while the 1 MB program-memory capacity allows more application code, configuration data, and protocol stacks to be stored locally. Key characteristics include 32-bit ARM Cortex-M4 operation at 120 MHz, 1 MB of flash, 160 KB of SRAM, an Ethernet MAC, and a 144-pin LFBGA-144-10 package. The large pin count provides access to the family’s communication, general-purpose I/O, analog, and timing functions. The industrial temperature range makes the device suitable for factory equipment, embedded controllers, communication modules, and connected automation systems. The device is identified by the Infineon ordering code XMC4500E144F1024ACXQSA1. The XMC4500-E144X1024-AC manufacturer product designation identifies the underlying industrial MCU configuration, while the full ordering suffix identifies the package, temperature, and shipment variant. This distinction matters when comparing distributor records because some listings abbreviate or omit the complete orderable suffix. XMC4500 controllers are intended for applications where deterministic embedded control and industrial communications are more important than minimizing pin count or package area. The Ethernet MAC enables network-connected equipment, while the Cortex-M4 core supports control software, communication stacks, and supervisory functions. A 144-pin LFBGA also requires careful PCB layout with adequate escape routing, power distribution, and thermal design. For new designs, use the manufacturer datasheet and product-page ordering information to confirm the exact pin assignment, supported peripherals, electrical limits, and package dimensions. The XMC4500E144F1024ACXQSA1 is a tray-packaged industrial MCU; procurement, stock, and lead-time questions should be directed through the XAIPART Request a Quote form. Engineering decisions should also account for the 3.3 V supply requirement, the 120 MHz operating point, the 144-ball land pattern, and the -40 °C to +85 °C environmental range.

RFQ Contact
XMC4500E144X1024ACXQSA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4500E144X1024ACXQSA1

XMC4500E144X1024ACXQSA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4500E144X1024ACXQSA1 is a 32-bit Arm Cortex-M4 microcontroller rated at 120 MHz, with 1024 kByte of flash memory and an Ethernet MAC, in a 144-pin PG-LFBGA-144-10 package. The device belongs to the XMC4000 family and targets industrial embedded systems requiring high-performance control, communications, and configurable peripheral support. An Arm Cortex-M4 microcontroller is a 32-bit reduced-instruction-set processor designed for embedded control. Positioned within the hierarchy of microcontroller, embedded processor, and semiconductor, it combines deterministic real-time execution with integrated memory, communications peripherals, and general-purpose I/O. The XMC4000 architecture is intended to provide a configurable peripheral set so equipment designers can tailor the device to application-specific industrial requirements. The principal features of the XMC4500E144X1024ACXQSA1 include a 120 MHz Cortex-M4 core, 1024 kByte of flash, an integrated Ethernet MAC, and a 144-pin LFBGA package. Its 1 MByte flash capacity provides substantial room for application code, configuration data, and protocol stacks. The Ethernet MAC supports designs requiring wired network connectivity without relying on an external network controller. The XMC4500 combines an industry-standard 32-bit Arm Cortex-M4 core with Infineon industrial peripherals. Its 120 MHz operating frequency supports responsive control loops and communication-intensive firmware. The family-level documentation describes a superset architecture, while the device-specific ordering information identifies the exact flash density, package, and qualification options. All grounds share a common ground potential, and the exposed die pad in applicable packages must connect to that common ground. Typical applications include industrial Ethernet equipment, factory automation controllers, programmable logic controllers, motor and motion-control systems, industrial communications gateways, and embedded data-acquisition equipment. The combination of 120 MHz processing performance, 1 MByte flash, and Ethernet MAC is particularly suitable for controllers that must execute control software and network protocols concurrently. For PCB implementation, follow the Infineon PG-LFBGA-144-10 package documentation for land patterns, ball assignments, routing, and exposed-pad connection. Pay particular attention to the common-ground requirement, high-speed Ethernet signal integrity, decoupling placement, and thermal management around the 144-ball land grid. Confirm the complete pin and ball assignments against the manufacturer package drawing before fabrication. This product overview combines the manufacturer ordering information, package identification, core and memory characteristics, and industrial application context into a design-oriented reference. It also identifies close same-family ordering options for engineers evaluating flash density and grade changes without overlooking the need to verify package-level compatibility.

RFQ Contact
XMC4500F100F1024AC - 120MHz Cortex-M4 MCU 1024KB | Infineon
XMC4500F100F1024AC

XMC4500F100F1024AC - 120MHz Cortex-M4 MCU 1024KB | Infineon

The Infineon XMC4500F100F1024AC is a 32-bit industrial microcontroller from the XMC4000 family, integrating an ARM Cortex-M4 core with FPU running at 120 MHz, 1024 KB of embedded Flash, and 160 KB of RAM in a 100-pin LQFP package. It is engineered for energy-efficient industrial applications including digital power conversion, motor control, and industrial connectivity. An ARM Cortex-M4 microcontroller is a 32-bit processor core that combines high-performance digital signal processing (DSP) instructions with a single-precision floating-point unit (FPU), commonly deployed in industrial automation, motor control, and power-conversion systems. The XMC4000 family extends this core with Infineon's proprietary peripheral set, bridging the CPU to power-management compute, motor-control compute, and connectivity ICs in the broader industrial semiconductor taxonomy. Key features include a Cortex-M4 core with DSP/FPU at 120 MHz, 1024 KB Flash program memory, 160 KB SRAM, an integrated Ethernet MAC, USB 2.0 FS, six CAN nodes, six USIC channels configurable as UART/SPI/I2C, two 12-bit ADC units with up to 26 channels, a CCU6 timer unit for motor PWM, and a flexible peripheral interconnect (HRPWM). The LQFP-100 package is surface-mountable with standard 0.5 mm pitch. The XMC4500 architecture pairs the Cortex-M4 core with a multi-layer bus matrix and dedicated peripheral DMA channels, enabling deterministic real-time response for power-conversion and motor-control loops. Embedded Flash supports in-application programming, and the on-board temperature sensor and supply-voltage monitor enable functional-safety-aware firmware designs. Typical applications include industrial servo drives, solar inverters, switched-mode power supplies with digital control loops, field-oriented motor control (FOC), industrial PLC I/O modules, and EtherCAT/CANopen slave controllers. The combination of Cortex-M4 DSP capability and dedicated CCU6 PWM timers makes XMC4500 particularly well-suited to digital power conversion and three-phase motor control. When designing with this part, allocate adequate decoupling (100 nF + 4.7 µF per VDD/VSS pair) and ensure that the 25 MHz crystal oscillator or external clock source meets the data sheet jitter specification. The 1024 KB Flash is split into two banks, allowing concurrent read/execute and in-field firmware updates via the built-in bootstrap loader. This page consolidates Infineon datasheet specifications, distributor pricing and stock, drop-in compatible variants within the XMC4500 series, and practical design notes that are not aggregated in the standalone datasheet.

RFQ Contact
XMC4500F100F1024ACXQMA1 - 120MHz Cortex-M4 | Infineon
XMC4500F100F1024ACXQMA1

XMC4500F100F1024ACXQMA1 - 120MHz Cortex-M4 | Infineon

Infineon Technologies XMC4500F100F1024ACXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 1 MB of flash memory and integrated Ethernet connectivity, housed in a 100-pin PG-LQFP-11 package. The device combines a high-performance Cortex-M4 processor core with a configurable peripheral set for industrial automation, networking, and embedded control systems. A microcontroller is a semiconductor system that integrates a processor core, program memory, data memory, and peripherals such as timers, communications interfaces, and analog blocks. The XMC4500 belongs to the Arm Cortex-M4 microcontroller family and the Infineon XMC4000 industrial microcontroller series. Its position in the embedded hierarchy is processor core to microcontroller to embedded control platform, combining deterministic real-time control with Ethernet-connected industrial equipment. The principal device characteristics include a 120 MHz operating frequency, 1 MB of flash storage, 32-bit processing, and a 3.3 V supply indicated by the ordering designation. The configurable peripheral architecture allows designers to tailor timer, communication, and interface resources around an industrial application. The 100-pin LQFP package provides a conventional surface-mount option with exposed-pad construction for improved thermal performance. Technical operation centers on the Arm Cortex-M4 processor core, which uses the ARM instruction set and supports efficient interrupt-driven control. Integrated Ethernet supports network-connected industrial equipment, while the extensive peripheral set reduces the need for external interface devices. The manufacturer describes the XMC4500 as an energy-efficient industrial platform combining leading peripheral capabilities with the Cortex-M4 core. Typical uses include industrial Ethernet controllers, programmable logic controllers, factory automation nodes, building automation interfaces, and embedded robotics. In each case, the 120 MHz processing rate supports responsive control logic, 1 MB of flash accommodates embedded firmware, and Ethernet allows status reporting or distributed control over an industrial network. PCB design should follow the manufacturer pin-definition table and recommended decoupling guidance for the 100-pin exposed-pad LQFP. The exposed thermal pad requires a solder-flooded PCB land and adequate thermal-via distribution to transfer heat into the board structure. Firmware configuration should also follow the ordering-information matrix because XMC4500 derivatives differ in available peripherals and temperature options. This product page consolidates the exact ordering designation, manufacturer specifications, package information, practical PCB guidance, and verified drop-in ordering-code alternatives. It also distinguishes configurable industrial features that are shared across the XMC4500 family from the specific package and ordering code of XMC4500F100F1024ACXQMA1.

RFQ Contact
XMC4500F100F768ACXQMA - 120MHz Cortex-M4 MCU | Infineon
XMC4500F100F768ACXQMA

XMC4500F100F768ACXQMA - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4500F100F768ACXQMA is a 32-bit industrial ARM Cortex-M4 microcontroller operating at 120 MHz, with 768 kByte of embedded Flash and an Ethernet MAC, supplied in a 100-pin LQFP package with an exposed pad. The device is identified in distributor data as the 3.3 V, 100-pin LQFP version of Infineon's XMC4000 family and is intended for energy-efficient industrial applications. An industrial microcontroller is a semiconductor integrated circuit that combines a processor core, embedded nonvolatile memory, communication peripherals, timers, and I/O interfaces on one device. The XMC4500 belongs to the XMC4000 family and uses the ARM Cortex-M4 architecture, placing it in the hierarchy of 32-bit MCU, microcontroller, embedded processor, and semiconductor. Its configurable peripheral set allows an industrial control design to combine real-time processing with Ethernet-connected equipment. The verified device data identifies three principal performance points: a 120 MHz Cortex-M4 core, 768 kByte of Flash, and integrated Ethernet MAC support. The Cortex-M4 platform supports efficient control-oriented software, while the larger Flash capacity accommodates networking stacks, control algorithms, diagnostics, and application firmware. The Ethernet MAC makes the MCU suitable for connected industrial systems without requiring a separate network controller solely for Ethernet interface management. Infineon describes the XMC4500 as combining a leading-edge peripheral set with the industry-standard ARM Cortex-M4 core. This combination targets energy-efficient industrial equipment where deterministic embedded control, communications, and configurable peripherals must coexist in one package. Distributor records further identify the target as the industrial XMC4000 MCU in a PG-LQFP-100-11 configuration. Typical uses include industrial Ethernet controllers, connected factory equipment, industrial automation modules, embedded network bridges, and real-time supervisory controllers. In these systems, the 120 MHz processor can service communications and control tasks, while the 768 kByte Flash provides room for protocol stacks and firmware. The Ethernet MAC is especially relevant to machinery monitoring, networked sensors, and supervisory control equipment. Designers should verify the complete pin assignment, exposed-pad connection, decoupling requirements, clock configuration, and startup sequence against the Infineon XMC4500 datasheet before layout release. The verified snippets do not enumerate all 100 pin names, so this page does not infer individual pin functions. Board design should preserve the manufacturer's recommended land pattern and exposed-pad implementation rather than treating the package as a generic LQFP. This page combines verified manufacturer and distributor facts, same-family drop-in candidates, price information available on 2026-10-30, and practical qualification guidance. It also distinguishes confirmed specifications from data that must be obtained from the full manufacturer datasheet, helping engineers evaluate the XMC4500F100F768ACXQMA without relying on incomplete catalog descriptions.

RFQ Contact
XMC4500F100K1024ACXQSA1 - ARM Cortex-M4 MCU, 120MHz, 1MB Flash | Infineon
XMC4500F100K1024ACXQSA1

XMC4500F100K1024ACXQSA1 - ARM Cortex-M4 MCU, 120MHz, 1MB Flash | Infineon

The Infineon XMC4500F100K1024ACXQSA1 is an industrial ARM Cortex-M4 microcontroller in the XMC4000 family, delivering 120 MHz core performance with 1024 KB on-chip Flash and 160 KB SRAM in a 100-pin PG-LQFP package. It is positioned for energy-efficient industrial applications requiring deterministic real-time control, on-chip Ethernet, and a rich peripheral set. What is an ARM Cortex-M4 microcontroller? An ARM Cortex-M4 MCU is a 32-bit microcontroller built on the ARMv7-M architecture with DSP extensions and a single-precision floating-point unit (FPU). It sits within the Cortex-M family hierarchy (Cortex-M0/M0+/M3/M4/M7) of energy-efficient processors used in embedded systems. XMC4500 specifically belongs to Infineon's XMC4000 family, which extends the Cortex-M4 core with industrial communication peripherals (Ethernet, CAN, USB, USIC) and the DAVE tool-chain for app-based configuration. Key differentiating features of the XMC4500 include: ARM Cortex-M4 core with FPU at 120 MHz; 1024 KB embedded Flash and 160 KB SRAM; on-chip 10/100 Mbps Ethernet MAC for industrial networking; multiple CAN nodes and USB 2.0 Full-Speed OTG; six 4-channel USIC (Universal Serial Interface Channel) modules configurable as UART, SPI, I2C, I2S, or LIN; 12-bit ADC, up to four CCU6 timer units for motor/PWM control; and an operating voltage range of 3.0 V to 3.6 V with -40 °C to +85 °C industrial temperature support. Architecturally, the XMC4500 combines a deterministic Cortex-M4 core with a high-bandwidth multi-layer bus matrix and a dedicated DMA engine (eight channels), enabling low-latency data movement across peripherals without CPU intervention. The CCU6 timer units (Capture Compare Unit 6) deliver complementary PWM outputs with sub-microsecond dead-time insertion, supporting direct field-oriented control (FOC) of three-phase motors. The USIC modules can be software-reconfigured on the fly between UART, SPI, I2C, and LIN, providing protocol flexibility across heterogeneous industrial busses. Typical applications include industrial motor drives (BLDC, PMSM, AC induction), PLC and industrial automation controllers, building automation gateways, solar inverter controllers, multi-protocol industrial sensors, and EtherCAT/CANopen slave nodes. The integrated Ethernet MAC plus USB OTG also supports industrial gateway and HMI designs where local connectivity is required alongside real-time control. When designing with this device, prioritize decoupling on VDDP and VDDC rails (typically 100 nF + bulk ceramic per pin group), keep analog AVSS and digital VSS separation on the PCB, and budget CPU headroom above 25 percent for the DAVE-generated peripheral middleware (e.g., TCP/IP stack, EtherCAT slave library). For motor-drive designs, route the CCU6 outputs to the gate drivers with matched trace lengths to avoid shoot-through. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in any single source, including specific parameter comparisons against other XMC4500 family members (XMC4502, XMC4504, XMC4400) and competitor Cortex-M4 MCUs.

RFQ Contact
XMC4500F100K1024ACXUMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4500F100K1024ACXUMA1

XMC4500F100K1024ACXUMA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4500F100K1024ACXUMA1 is a 32-bit industrial Arm Cortex-M4 microcontroller with a 120 MHz clock, 1 MB of embedded Flash, integrated Ethernet connectivity, and a 100-pin PG-LQFP package with exposed pad. It belongs to the XMC4000 family and combines deterministic microcontroller performance with industrial communications and embedded networking capabilities. A microcontroller is a semiconductor device that integrates a processor core, memory, programmable peripherals, and communication interfaces onto one package. The Cortex-M4 processor belongs to the Arm embedded processor family and executes instructions from tightly controlled memory while supervising timers, serial interfaces, analog peripherals, Ethernet, and external interrupt sources. Within the system hierarchy, this device is a microcontroller, embedded processor, programmable controller, and power-management-aware semiconductor. The XMC4500F100K1024ACXUMA1 provides 1 MB of Flash memory, a 120 MHz maximum CPU frequency, and 32-bit processing in an industrial-oriented package. Its Ethernet support makes the device suitable for connected equipment that must exchange data over a wired network. The exposed pad beneath the PG-LQFP-100-11 package provides a direct thermal path from the die to the PCB, allowing heat to be removed through copper and, where necessary, an external heat spreader. The Arm Cortex-M4 architecture is designed for efficient embedded control and signal-processing workloads. Its exception model supports deterministic interrupt handling, while integrated peripherals reduce the need for discrete interface components. The Ethernet subsystem adds a network interface without requiring a separate communication controller. This combination makes the device useful for industrial controllers, gateways, embedded servers, and connected sensor platforms while preserving a single-chip control architecture. Typical applications include industrial Ethernet gateways, programmable automation controllers, building and energy-management equipment, connected sensor hubs, motor and process-control systems, and communications equipment. The 120 MHz processing rate supports responsive control loops, protocol processing, and supervisory logic. The 1 MB Flash capacity allows firmware, configuration data, and application code to be stored locally, reducing system complexity for embedded networking products. PCB implementation should follow the Infineon pin-description table and reference-manual guidance for power, ground, decoupling, and exposed-pad connections. Place input and bulk-decoupling capacitors close to their associated supply pins, provide a low-impedance ground plane, and thermally couple the exposed pad to a sufficiently large copper area. Validate the final board under maximum processor activity, Ethernet traffic, and the highest intended ambient temperature. This product page combines the official ordering information with practical architecture guidance, application fit, package considerations, and parameter-level replacement analysis. It is structured to help engineers identify whether the 120 MHz Cortex-M4 core, 1 MB Flash configuration, Ethernet integration, and 100-pin industrial package align with a specific embedded-control design.

RFQ Contact
XMC4500F144F1024ACXQMA1 - 120MHz ARM MCU | Infineon
XMC4500F1024ACXQMA1

XMC4500F144F1024ACXQMA1 - 120MHz ARM MCU | Infineon

The Infineon Technologies XMC4500F144F1024ACXQMA1 is a 32-bit ARM Cortex-M4 industrial microcontroller with a 120 MHz operating frequency, 1 MB of flash memory, and Ethernet connectivity in a 144-pin PG-LQFP package. The device combines a high-performance Cortex-M4 processor with an integrated industrial peripheral set for energy-efficient embedded control. It is supplied for 1.3 V and 3.3 V operation, making it suitable for industrial Ethernet equipment, automation controllers, connected machines, and embedded communication systems. An Arm Cortex-M4 microcontroller is a 32-bit reduced-instruction-set processor within the broader embedded processor and semiconductor hierarchy. The Cortex-M4 architecture is designed for deterministic real-time control, efficient interrupt handling, and energy-efficient execution. Infineon positions the XMC4500 as an industrial member of the XMC4000 family, combining general-purpose embedded processing with communication and configurable peripherals rather than functioning merely as a general-purpose microcontroller. The principal operating characteristics include a 120 MHz clock, 1 MB of flash organized as 1M x 8, 32-bit processing, and integrated Ethernet. Its 144-pin LQFP-13 package provides a high pin count suitable for parallel and digital interfaces. The manufacturer identifies the component as an industrial 32-bit microcontroller with an ARM Cortex-M4 core and 1024 kByte of flash. These characteristics distinguish it from smaller Cortex-M devices that offer fewer pins, less flash, or no integrated Ethernet. The XMC4500 family uses a configurable peripheral concept, allowing designers to tailor the device around communication, timing, serial, and application-specific control requirements. Its Ethernet capability makes the MCU suitable for networked industrial equipment without requiring a separate communications controller. Software development is supported through the Infineon XMC ecosystem and DAVE configuration tooling. Firmware designers should use the XMC4500 reference manual together with the manufacturer datasheet when assigning peripheral functions, pins, clocks, and interrupts. Typical applications include industrial Ethernet switches, motor and motion controllers, factory automation nodes, building automation interfaces, connected sensors, industrial communications equipment, and embedded gateway platforms. For designs requiring more program storage than a 768 kByte alternative, the 1 MB configuration provides additional code and data headroom. For designs whose software organization depends on an external memory interface instead of the F-series internal flash interface, the K-series device may require firmware and board-level review before substitution. A critical implementation consideration is the exposed-pad connection. Infineon specifies that all VSS, VSSA, and VSSO pins share a common ground potential and that the exposed die pad in applicable packages must also connect to common ground. The PCB should therefore provide a low-impedance ground plane, adequate thermal-via distribution, and decoupling close to the supply pins. Pin multiplexing and alternate-function selection must be checked in the datasheet pin table before finalizing the board. This page combines the manufacturer product information, datasheet, reference manual, distributor availability records, and carefully qualified same-package alternatives. It also organizes the device for industrial design decisions by covering the Cortex-M4 architecture, 120 MHz performance, 1 MB flash, Ethernet integration, common-ground construction, and the engineering checks required for an LQFP-144 migration.

RFQ Contact
XMC4500F144K1024ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4500F144K1024ACXQMA1

XMC4500F144K1024ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon XMC4500F144K1024ACXQMA1 is a 32-bit industrial ARM Cortex-M4 microcontroller with 120 MHz maximum clock frequency, 1024 kByte flash memory, and 160 kByte SRAM in a 144-pin LQFP package. It combines an industrial communications-focused microcontroller platform with Ethernet connectivity for connected industrial equipment, automation systems, and embedded network controllers. An ARM Cortex-M4 microcontroller is a 32-bit embedded processing device built around the Cortex-M4 processor core. The MCU hierarchy extends from a general-purpose microcontroller to a real-time embedded controller, with integrated flash, SRAM, digital peripherals, communication interfaces, and interrupt control. Infineon positions the XMC4500 within its XMC4000 family for energy-efficient industrial applications requiring configurable peripherals and Ethernet support. The principal device features include a 120 MHz maximum operating frequency, 1 MB of flash organized as 1M x 8, and 160 kByte of SRAM. Its 144-pin LQFP package provides access to the extensive XMC4500 peripheral set while supporting compact industrial control-board layouts. The ordering designation identifies an industrial-grade XMC4500 configuration with 1024 kByte flash and the XQMA1 package and qualification suffix. The device combines high-frequency Cortex-M4 processing with on-chip memory and a configurable peripheral set. This architecture allows software-defined control functions, communication protocols, and application-specific interfaces to coexist on one component. Ethernet connectivity makes the microcontroller suitable for embedded gateways and industrial network nodes where local control and network communication must be combined without a separate protocol processor. Typical uses include industrial Ethernet controllers, factory automation equipment, networked motor and motion-control systems, building automation interfaces, and industrial communications gateways. The 120 MHz processing rate supports responsive protocol handling and control-loop execution, while 1024 kByte flash provides room for networking stacks, control firmware, diagnostics, and configuration data. PCB designers should assign all 144 package pins directly from the pin-description and package tables in the Infineon XMC4500 datasheet. They should also preserve the manufacturer's recommendations for supply decoupling, clock circuitry, analog interfaces, and exposed-package routing. Firmware must be tested against the exact ordering designation because suffix changes can represent differences in grade, temperature range, qualification, or package configuration. This product page combines the Infineon ordering information, family-level electrical characteristics, package details, and practical replacement guidance into an engineering-focused resource. It supports component identification, board redesign, firmware planning, and cross-reference work for engineers evaluating the XMC4500F144K1024ACXQMA1 in industrial embedded systems.

RFQ Contact
XMC4502-F100F768AB - 120MHz Cortex-M4 MCU | Infineon
XMC4502-F100F768AB

XMC4502-F100F768AB - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4502-F100F768AB is a 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 768 kB of flash memory and an Ethernet MAC, supplied in a PG-LQFP-100-11 package. It belongs to the XMC4000 industrial microcontroller family and targets real-time embedded systems where deterministic control, networking, and peripheral integration are important. The verified product information identifies the device as an industrial ARM Cortex-M4 microcontroller; additional electrical, memory, and peripheral details must be confirmed from the manufacturer datasheet. A microcontroller is a compact embedded computing component that integrates a processor core, memory, communication interfaces, timers, analog and digital peripherals, and power-management functions on one semiconductor die. The Cortex-M4 core provides a 32-bit processing architecture commonly used in industrial automation, communications, motor control, and connected equipment. The XMC4000 family combines this general-purpose core with configurable peripherals intended for real-time control applications. The XMC4502-F100F768AB provides three headline identifiers from the verified data: a 120 MHz operating frequency, 768 kB of flash memory, and integrated Ethernet MAC capability. Its 32-bit Arm Cortex-M4 architecture supports software-controlled system operation, while the XMC4500 family is identified by Arm Keil documentation as a 120 MHz Cortex-M4 device in the XMC4000 sub-family. The package designation PG-LQFP-100-11 identifies a 100-lead LQFP package for PCB integration. The XMC4502-F100F768AB is suited to industrial automation systems that require local control and network connectivity. The Ethernet MAC can support network-connected equipment when paired with the required external interface circuitry and stack. The 120 MHz core provides processing headroom for control loops, communication handling, and supervisory logic. The verified search results also associate the device with industrial automation and XMC-FB applications, but exact peripheral assignments, electrical limits, and pin functions require review of the official Infineon documentation. Typical design work should begin with the package footprint, pin multiplexing, clock configuration, memory map, and Ethernet physical-layer requirements. Because this is a 100-pin LQFP MCU, PCB layout must preserve adequate clearance around fine-pitch leads and provide reliable power, ground, decoupling, and signal-integrity connections. Firmware and tool selection should be checked against the XMC4000 device family pack and the exact ordering variant before production release. This page consolidates the verified manufacturer-family description, distributor identification, package information, tool references, and sourcing links for XMC4502-F100F768AB. It intentionally avoids filling unprovided pin, electrical, temperature, and pricing fields with assumptions; those values should be obtained from the current manufacturer datasheet or an authorized quotation. For a complete design decision, compare the verified 120 MHz, 768 kB flash, Cortex-M4, Ethernet MAC, and PG-LQFP-100-11 characteristics against the system clock, network, memory, package, and qualification requirements. XAIPART can be contacted for availability, pricing, and datasheet support using the MPN.

RFQ Contact
XMC4502-F100K768AB 120MHz 768KB MCU | Infineon
XMC4502-F100K768AB

XMC4502-F100K768AB 120MHz 768KB MCU | Infineon

The Infineon XMC4502-F100K768AB is a 32-bit ARM Cortex-M4 industrial microcontroller operating at 120 MHz, with 768 KB of flash memory and a PG-LQFP-100-11 package. It is designed for real-time industrial control applications requiring deterministic processing, Ethernet connectivity, and a broad peripheral set. An ARM Cortex-M4 microcontroller is a 32-bit embedded processor based on the ARM architecture, combining a processor core, memory, interrupt handling, and peripherals on one integrated circuit. The XMC4500 family belongs to the industrial microcontroller hierarchy and is positioned between general-purpose embedded processors and more specialized control devices. Its role is to execute control software while managing communication, timing, analog, and digital I/O functions in equipment such as industrial controllers and connected automation systems. The verified product information identifies the device as an ARM Cortex-M4 XMC4000-series microcontroller with 120 MHz processing and 768 KB flash. The part is listed in a PG-LQFP-100-11 package, a 100-pin plastic low-profile quad flat package. The package provides a large number of external pins for power, ground, debug, communications, timers, analog functions, and digital I/O. Additional details such as SRAM size, operating voltage range, temperature limits, and Ethernet transceiver specifications are not provided in the retrieved data and therefore require confirmation from the manufacturer datasheet. The XMC4500 family is intended for real-time critical systems, where predictable control response and integrated peripherals can reduce the need for separate interface components. According to the retrieved Infineon product information, the family is associated with industrial ARM Cortex-M4 devices for real-time applications. The Cortex-M4 platform is widely used for embedded control because it supports efficient interrupt-driven software and a broad software ecosystem, including CMSIS-based development workflows. Typical applications include industrial automation equipment, Ethernet-connected control systems, motor and motion-control platforms, building automation controllers, communications equipment, and test systems. The available MPN is especially relevant where a 120 MHz core, 768 KB flash configuration, and 100-pin package are required together. Selection should account for the exact peripheral set, memory map, electrical limits, pin multiplexing, package dimensions, and software support required by the target product. For PCB implementation, treat the PG-LQFP-100-11 footprint and pin multiplexing as design-controlled constraints. Confirm the manufacturer's land pattern, exposed-pad or thermal requirements, decoupling recommendations, and recommended operating region before release to production. This page synthesizes verified distributor information, official product references, available pricing signals, and engineering-oriented selection guidance without inventing unprovided electrical specifications.

RFQ Contact
XMC4504-F100K512AB 120MHz Cortex-M4 MCU | Infineon
XMC4504-F100K512AB

XMC4504-F100K512AB 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4504-F100K512AB is an industrial 32-bit ARM Cortex-M4 microcontroller operating at 120 MHz, with 512 KB of flash memory, 128 KB of SRAM, and an Ethernet MAC in an LQFP-100 package. It combines deterministic real-time control with industrial communications and is identified as a member of the XMC4000 family. What is an ARM Cortex-M4 microcontroller? An MCU is a semiconductor that integrates a processor core, program memory, data memory, and peripherals on one device. The ARM Cortex-M4 core belongs to the microcontroller hierarchy, where the XMC4504-F100K512AB adds Infineon timing, communications, analog, and digital-control resources for embedded industrial systems. Its 512 KB flash supports firmware storage, while 128 KB SRAM provides working memory for control loops and communication tasks. The verified product information identifies a 120 MHz processor, 512 KB flash, 128 KB SRAM, Ethernet MAC, and LQFP-100 package. Search results also describe the device as part of Infineon’s XMC4000 family and identify associated peripherals including DMA, I2S, LED, POR, PWM, and watchdog functions. The available source data does not provide verified values for every electrical limit, pin function, peripheral characteristic, or package dimension, so those details remain marked as data needed. The target MPN is associated with Infineon ordering information that distinguishes it from the similarly named XMC4504-F100K512-AC. The verified search results identify XMC4504-F100K512-AC as an industrial ARM Cortex-M4 device with the same headline 120 MHz, 512 KB flash, and 128 KB SRAM characteristics, but the supplied data does not establish every pin-level difference. Direct substitution therefore requires comparison of the exact package drawing, pin names, electrical ratings, memory map, and qualification markings. Typical design roles include industrial automation, motor and motion control, networked embedded equipment, and real-time control systems where deterministic peripheral timing and Ethernet connectivity are useful. The Ethernet MAC makes the device relevant to connected industrial controllers, provided the design includes suitable PHY, magnetics, routing, and signal-integrity implementation. The LQFP-100 package requires careful PCB escape routing, decoupling, exposed thermal considerations where applicable, and verification of all 100 pins against the manufacturer package drawing. This page combines verified Infineon and distributor information with clearly identified missing-data boundaries rather than inferring undocumented specifications.

RFQ Contact
XMC4504-F144F512AB - 120MHz Cortex-M4 MCU | Infineon
XMC4504-F144F512AB

XMC4504-F144F512AB - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4504-F144F512AB is a 32-bit ARM Cortex-M4 industrial microcontroller operating at 120 MHz, with 512 KB of flash memory and a 144-pin PG-LQFP-24 package. It belongs to the XMC4000 family and is designed for industrial applications requiring deterministic real-time control, connected peripherals, and a broad set of analog and digital interfaces. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and communication interfaces on one semiconductor device. In the hierarchy of electronic components, this MCU sits below embedded processor and below the broader category of semiconductors, while it is above general-purpose control logic in system-level terminology. The ARM Cortex-M4 core provides a 32-bit processing environment suitable for motor control, industrial automation, communications, and embedded measurement systems. The verified data identifies the XMC4504-F144F512AB as an XMC4000-series device with 120 MHz operation, 512 KB flash, an Ethernet MAC, 32-bit architecture, and a 144-pin LQFP package. The related Infineon XMC4504-F144K512-AC product page identifies the same 120 MHz, 512 kB, Ethernet MAC platform for industrial applications, providing useful family-level context while the exact orderable MPN remains the requested AB variant. The part is especially relevant when a design needs substantial embedded processing alongside Ethernet connectivity. The 120 MHz core can support protocol handling, supervisory control, signal processing, and real-time control tasks, while the 512 KB flash capacity provides a practical balance between firmware storage and system integration. The LQFP-144 package exposes a broad pin count for external peripherals and mixed-signal interfaces. Typical uses include industrial Ethernet equipment, factory automation controllers, building and infrastructure electronics, communication gateways, and embedded control platforms. Engineers should verify the exact peripheral assignments, electrical limits, pin multiplexing, startup configuration, memory map, and package details against the manufacturer documentation before layout or firmware deployment. The principal design consideration is package and software verification rather than headline performance. Confirm that the PCB land pattern matches the exact 144-pin LQFP variant, that all required power, clock, reset, debug, and communication signals are available, and that the selected toolchain supports the XMC4000 family. This page consolidates the verified source information, source links, application context, and engineering caveats without inventing unavailable electrical details.

RFQ Contact
XMC4700F100K1536AAXQMA1 - 144MHz Cortex-M4 MCU | Infineon
XMC4700F100K1536AAXQMA1

XMC4700F100K1536AAXQMA1 - 144MHz Cortex-M4 MCU | Infineon

The Infineon Technologies XMC4700F100K1536AAXQMA1 is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 family, operating up to 144 MHz with 1.5 MB of embedded flash, 276 kB of SRAM, and integrated Ethernet connectivity. It is supplied in a 100-pin PG-LQFP package for industrial embedded-control designs. A microcontroller is a programmable semiconductor integrating a processor core, memory, peripherals, and communication interfaces on one device. The XMC4000 family belongs to the industrial embedded-control hierarchy, combining real-time processing with DSP and floating-point capabilities. This makes the XMC4700 suitable when a design requires deterministic control, network communication, mixed-signal acquisition, timer and PWM control, or a combination of these functions. Principal device characteristics include an ARM Cortex-M4 processor core, 32-bit architecture, 144 MHz maximum operating frequency, 1.536 MB of flash memory, and 276 kB of SRAM. The ordering designation identifies an industrial-grade XMC4700 configuration in a 100-pin LQFP package. Integrated Ethernet allows the controller to participate directly in connected industrial equipment without requiring a separate network interface. The XMC4700 architecture supports embedded control workloads requiring both real-time peripheral handling and higher-level protocol processing. Its substantial flash capacity allows larger control firmware, communication stacks, and application logic to be consolidated into one component, while SRAM supports active control loops, packet buffers, and working memory. The 144 MHz Cortex-M4 core includes DSP-oriented instruction support and FPU capability according to the family description. Typical applications include industrial Ethernet controllers, motor and power-conversion control, factory automation equipment, industrial networking gateways, and connected embedded-control systems. The combination of Ethernet, mixed-signal acquisition capability, timer/PWM resources, and ample program memory is particularly useful in systems that must coordinate sensing, communications, and real-time actuation. Board design must account for the 100-pin LQFP footprint, exposed-pad thermal requirements, power-supply sequencing, high-speed signal integrity, and the pin multiplexing supported by the device. Firmware should be built against the exact XMC4700 headers and peripheral configuration rather than assuming that a generic Cortex-M4 pinout applies. This page combines the manufacturer device description, exact ordering information, source-document links, application guidance, and available family comparisons. It also identifies which alternatives preserve the package and ordering family, helping engineers distinguish true PCB-compatible options from devices that merely offer similar processing performance.

RFQ Contact
XMC4700F100K2048AAXQMA1 - 144MHz Cortex-M4 MCU | Infineon
XMC4700F100K2048AAXQMA1

XMC4700F100K2048AAXQMA1 - 144MHz Cortex-M4 MCU | Infineon

The Infineon XMC4700F100K2048AAXQMA1 is a 32-bit industrial Arm Cortex-M4 microcontroller operating at up to 144 MHz, with 2048 kB of embedded Flash and 352 kB of SRAM, in a 100-pin LQFP package with an exposed pad. It belongs to the XMC4000 family and integrates Ethernet connectivity for connected industrial equipment. An industrial microcontroller is a semiconductor device designed to execute embedded control, monitoring, and communications functions in equipment operating under sustained environmental and availability requirements. The XMC4700 combines a 32-bit Arm Cortex-M4 processing core with embedded memory and Ethernet peripherals in one device. In the product hierarchy, it belongs to the microcontroller class, within semiconductor and embedded-processing devices. Core features include 144 MHz maximum operation, 2048 kB Flash, 352 kB SRAM, 32-bit architecture, and integrated Ethernet. The embedded Flash provides 2 Mbit of nonvolatile program storage, while the 352 kB SRAM provides working memory for control algorithms, protocol stacks, diagnostics, and communications buffers. The 100-pin LQFP-100 package also supports a compact surface-mount implementation for industrial controller boards. The Cortex-M4 architecture combines general-purpose control processing with digital signal processing instructions and floating-point capabilities suited to embedded control workloads. This architecture allows the XMC4700 to serve as the central processor for motor-control, communications, and industrial automation systems. Integrating Ethernet within the microcontroller reduces the need for separate network-interface hardware when the system design requires an Ethernet-capable controller. Typical applications include industrial Ethernet equipment, factory automation controllers, building automation interfaces, motor-control systems, and connected sensor gateways. The combination of 2048 kB Flash and 352 kB SRAM is particularly useful for firmware, parameter storage, communication stacks, diagnostics, and real-time control tasks. The same feature set also supports test and measurement front ends that require deterministic embedded processing plus Ethernet connectivity. Designers should treat the exposed pad as a thermal and electrical connection rather than an optional mechanical feature. Follow the manufacturer’s pin-description and land-pattern guidance when assigning PCB tracks, and validate the Ethernet implementation against the required PHY, magnetics, isolation, and network-timing requirements. Firmware migration also requires checking peripheral availability and the memory map rather than assuming that all XMC family derivatives are functionally identical. This page combines the manufacturer’s ordering information, memory and clock specifications, package details, qualified drop-in alternatives, comparison parameters, and practical PCB guidance. It is intended to accelerate engineering evaluation while preserving the distinction between a mechanically compatible device and a fully application-qualified replacement.

RFQ Contact
XMC4700F144F2048AAXQMA1 - 144MHz ARM MCU | Infineon
XMC4700F144F2048AAXQMA1

XMC4700F144F2048AAXQMA1 - 144MHz ARM MCU | Infineon

Infineon Technologies XMC4700F144F2048AAXQMA1 is an industrial 32-bit ARM Cortex-M4 microcontroller operating at 144 MHz, with 2 MB of embedded Flash memory, 352 KB of RAM, and an Ethernet MAC, packaged in a 144-pin PG-LQFP with an exposed thermal pad. The part combines Cortex-M4 DSP and floating-point capability with the XMC4000 family’s communication and industrial-control peripherals. Its 3.3 V operating supply supports equipment designs that use a conventional industrial embedded-control supply rail. An ARM Cortex-M4 microcontroller is a 32-bit embedded processor that combines general-purpose control processing with single-precision floating-point arithmetic and digital signal processing instructions. Within the product hierarchy, this device belongs to the XMC4000 family of Arm Cortex-M4 microcontrollers, a series designed for industrial communications, motor-control platforms, factory automation, and connected embedded equipment. The Cortex-M4 architecture provides a conventional memory-mapped peripheral model while retaining deterministic interrupt-driven operation. Three principal characteristics define the XMC4700F144F2048AAXQMA1: its 144 MHz Cortex-M4 core, 2 MB of embedded Flash for firmware and constants, and 352 KB of SRAM for working data. The Ethernet MAC adds hardware support for Ethernet-connected control systems without requiring those functions to be implemented entirely in software. The 144-pin LQFP package exposes substantially more I/O than small-outline packages, making the device appropriate for boards combining digital control, analog interfaces, communications, and external memory. The XMC4700 architecture extends the Cortex-M4 core with an Ethernet MAC, high-speed USB, CAN, and additional industrial peripherals. According to the Infineon XMC4700/XMC4800 datasheet and reference manual, the family is intended for energy-efficient embedded-control applications requiring higher processing performance and DSP/FPU capability. Firmware can use the Cortex-M4 hardware floating-point unit for control loops and signal calculations instead of implementing those operations in integer-only software. Typical uses include industrial Ethernet controllers, factory automation nodes, motor-control and power-conversion equipment, communications infrastructure, and embedded gateways. In an Ethernet application, the MCU can manage control tasks while the MAC handles packet processing. Its large Flash capacity supports network stacks, boot code, application firmware, and configuration data, while the 352 KB SRAM provides space for protocol buffers and real-time working sets. Board design must account for the exposed thermal pad, analog supply requirements, high-speed communication impedance control, and the numerous power and ground pins. Place decoupling capacitors close to their associated supply pins, provide continuous ground-plane coverage beneath the device, and follow the manufacturer’s reference-layout and pin-multiplexing guidance. The exposed pad should be connected according to the package drawing and thermal requirements rather than treated as an unused lead. This product page combines manufacturer specifications, verified ordering information, practical interface-planning guidance, and a qualified comparison with the closest identified Infineon ordering variant. It also highlights the Ethernet MAC, Cortex-M4 DSP/FPU capability, memory capacity, package constraints, and the engineering checks that matter most when replacing or redesigning around the XMC4700F144F2048AAXQMA1.

RFQ Contact
XMC4800-E196K2048AA - 144MHz Cortex-M4 MCU | Infineon
XMC4800-E196K2048AA

XMC4800-E196K2048AA - 144MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4800-E196K2048AA is an industrial 32-bit Arm Cortex-M4 microcontroller operating at 144 MHz, with 2048 kB of embedded flash memory, Ethernet connectivity, and a 196-pin PG-LFBGA package. The device belongs to the XMC4000 family and combines a real-time microcontroller core with industrial communication and mixed-signal capabilities. Its stated operating voltage is 3.3 V, and the verified product information identifies the part for embedded industrial control, networked automation, and EtherCAT-connected equipment. An Arm Cortex-M4 microcontroller is a 32-bit embedded processor based on the ARMv7E-M architecture and optimized for real-time control systems. The Cortex-M4 core combines deterministic exception handling, compact instruction processing, and support for efficient digital signal-processing instructions. Within the broader semiconductor hierarchy, this device is an embedded microcontroller, part of the integrated-circuit category, and specifically designed for industrial automation rather than general-purpose computing. The XMC4800-E196K2048AA provides 144 MHz processing performance, 2048 kB of on-chip program flash, and integrated Ethernet. These features allow firmware, communications software, control logic, and field-bus services to execute from one integrated device. The verified product description also identifies on-chip flash and analog or mixed-signal capabilities. Its industrial positioning and stated 125°C ambient-temperature capability distinguish it from general-purpose microcontrollers intended for consumer or office environments. The EtherCAT capability associated with the XMC4800 family is important for industrial automation because EtherCAT provides deterministic Ethernet-based communication between controllers and distributed I/O devices. Integrating communications processing with a 144 MHz Cortex-M4 core can reduce system complexity compared with a separate microcontroller and communications controller. The 196-pin LFBGA package also provides a substantial pin count for mixed-signal, communications, debug, and application-specific interfaces, although its land grid requires careful PCB layout and inspection. Typical applications include EtherCAT servo drives, programmable automation controllers, industrial Ethernet gateways, motor-control equipment, factory-floor I/O modules, and embedded condition-monitoring systems. In each case, the Ethernet interface supports networked control, while the Cortex-M4 processing capacity accommodates real-time algorithms and communications stacks. The 3.3 V supply and 125°C ambient-temperature specification make the device suitable for industrial environments when the complete circuit, storage, and thermal design remain within their respective limits. Designers should verify all 196 BGA assignments against the official Infineon datasheet before layout and must provide suitable decoupling, clock circuitry, programming access, and Ethernet physical-layer implementation. The package requires careful escape routing and assembly inspection, and firmware memory planning should account for the 2048 kB flash capacity. Exact peripheral availability, electrical limits, and recommended operating conditions should be confirmed in the manufacturer datasheet. This page consolidates the verified Infineon specifications, distributor pricing, package information, and practical application guidance. It also distinguishes confirmed drop-in alternatives from variants that cannot safely be treated as replacements, helping engineers evaluate the XMC4800-E196K2048AA without relying on unverified cross-reference listings.

RFQ Contact