Products (21,000+)

Z86E3116VSC - 16MHz 8-Bit Z8 OTP MCU | ZiLOG
Z86E3116VSC

Z86E3116VSC - 16MHz 8-Bit Z8 OTP MCU | ZiLOG

The ZiLOG Z86E3116VSC is an 8-bit Z8-family microcontroller operating at 16 MHz, with 2 KB of one-time-programmable program memory, 24 I/O lines, and operation from 3.5 V to 5.5 V. The device is packaged in a 28-pin square ceramic-chip carrier with J-leads, identified by package code QCCJ. Its combination of OTP memory, moderate I/O capacity, and compact surface-mount package makes it suitable for compact embedded-control products that require deterministic firmware storage and modest digital I/O. An 8-bit microcontroller is a complete embedded-processing component that executes firmware from internal program memory and uses digital inputs and outputs to control a product. Within the semiconductor hierarchy, the Z86E3116VSC belongs to the microcontroller class, integrates a CPU core, memory, timers, and I/O circuitry, and serves as the central controller in an embedded system. The Z8 name identifies ZiLOG's 8-bit architecture, while OTP memory permits a device to be programmed during manufacturing rather than repeatedly rewritten in the field. The principal device characteristics include a 16 MHz operating speed, 2 KB of OTP program memory, 125 bytes of RAM as reported in the component specification listing, and 24 I/O pins. One product listing describes a 4 KB OTP configuration, while the distributor listing identifies the Z86E3116VSC specifically as the 2 KB version. Designers should therefore use the manufacturer pin and memory tables for the exact ordering code and should not infer the target's program-memory capacity from the conflicting 4 KB description. The Z86E3116VSC is designed for compact control tasks such as appliance control, small industrial modules, instrumentation interfaces, and embedded products with modest processing requirements. Its 24 I/O lines can support digital sensing, actuation, indicators, and communication interfaces when the required peripheral functions and pin multiplexing allow. The 3.5 V to 5.5 V supply range accommodates both lower-voltage and conventional 5 V system rails, although external interface levels and timing must be checked against the device limits. The 28-pin QCCJ package is a legacy-style square ceramic-chip carrier with J-shaped terminals. Unlike a conventional leaded DIP package, it is intended for surface mounting and offers a compact footprint. Because the exact pin assignments are not published in the retrieved material, the complete pin map should be taken directly from the Zilog datasheet before schematic capture, footprint creation, or PCB routing. Designers should pay particular attention to OTP programming, supply decoupling, oscillator implementation, and unused-pin handling. OTP memory is suitable for permanent firmware but cannot accept field upgrades, so the programming process must occur during manufacturing. Power rails require local high-frequency bypass capacitance, while oscillator and I/O routing should minimize capacitive loading and switching noise. This product record combines the exact Z86E3116VSC ordering information with package, memory, voltage, timing, and I/O details, a quantified comparison against the nearest identified substitute family member, and practical guidance for programming and layout. It supports faster engineering triage while directing design-critical decisions to the manufacturer datasheet.

RFQ Contact
Z86E3312PSG - 8-Bit 12MHz Z8 MCU | Zilog
Z86E3312PSG

Z86E3312PSG - 8-Bit 12MHz Z8 MCU | Zilog

Zilog Z86E3312PSG is an 8-bit Z8 microcontroller operating at 12 MHz with 4 KB of one-time-programmable program memory, 237 bytes of RAM, and 24 general-purpose I/O pins. The device is housed in a 28-pin plastic DIP package and operates from a 4.5 V to 5.5 V supply. Its integrated peripherals include power-on reset, a watchdog timer, and EBI/EMI connectivity, making it suitable for compact embedded control systems, appliance controls, and simple peripheral interfaces. An 8-bit microcontroller is a programmable semiconductor that executes instructions from a defined instruction set while using registers, memory, and dedicated I/O circuitry to control a system. The Z86E3312PSG belongs to the Zilog Z8 family, combining a general-purpose embedded processor with on-chip memory and communication resources in one package. Its one-time-programmable memory allows a finished device to be programmed once for a specific application, which is useful for cost-sensitive controllers where field re-programming is unnecessary. The Z86E3312PSG combines a 12 MHz operating clock with 4 KB of OTP program memory and 237 x 8 bytes of RAM. Its 24 general-purpose I/O pins provide substantial parallel connectivity for switches, indicators, relays, displays, sensors, and external logic. Integrated power-on reset and watchdog-timer functions support dependable startup and recovery after faults. EBI/EMI resources add external bus or interface capability without requiring a separate protocol controller. The 4.5 V to 5.5 V operating range places the device in a classic 5 V embedded-control environment. A 5 V rail allows direct interfacing with many conventional 5 V logic families, although every external signal and supply rail must remain within the limits defined by the manufacturer datasheet. The 12 MHz clock provides the execution rate for control loops, state machines, user-interface scanning, and moderate data-processing tasks rather than high-throughput workloads. Typical uses include appliance and equipment controllers, building-control interfaces, LED and switch management, simple industrial modules, and embedded peripheral controllers. The 24 I/O pins are particularly useful when a design must connect multiple discrete inputs and outputs while retaining external-bus capability. A system can place the MCU between operator controls and actuators while using the watchdog timer to recover from firmware or communication stalls. Design around the DIP-28 footprint and verify all pin assignments from the manufacturer pin-description table before laying out the PCB. Place the device away from heat sources and follow the recommended decoupling arrangement for the 5 V supply. Because OTP memory cannot be rewritten, validate the complete firmware image before programming the production device and maintain a controlled manufacturing process. This product page consolidates the core electrical, memory, interface, lifecycle, and package characteristics of the Z86E3312PSG with practical application guidance. It also distinguishes verified functions from parameters that require confirmation in the manufacturer datasheet, helping engineers evaluate controller selection, PCB reuse, firmware planning, and production provisioning.

RFQ Contact
Z86E3312SSC - 8-Bit 12MHz OTP Microcontroller | Zilog
Z86E3312SSC

Z86E3312SSC - 8-Bit 12MHz OTP Microcontroller | Zilog

The Zilog Z86E3312SSC is an 8-bit Z8 microcontroller operating at up to 12 MHz with 4 KB of one-time-programmable ROM, 237 bytes of RAM, and 24 general-purpose I/O pins. It operates from a 4.5 V to 5.5 V supply and is packaged in a 28-pin SOIC measuring 7.50 mm wide. The combination of OTP program memory, an 8-bit CPU, and 24 I/O pins makes it suitable for compact embedded control, consumer equipment, and cost-sensitive products requiring one-time field programming. A microcontroller is a complete embedded processing system integrated on one semiconductor device. The Zilog Z8 family belongs to the hierarchy of microcontrollers, embedded processors, and programmable logic devices. Unlike a general-purpose microprocessor, this device includes program memory, data memory, I/O, timing, and interrupt resources on one chip. That integration reduces board size and component count while simplifying firmware development for embedded control tasks. The principal features include an 8-bit data bus, a 12 MHz maximum clock, 4 KB of OTP program memory, 237 bytes of RAM, and 24 general-purpose I/O pins. OTP memory allows a programmed image to be permanently stored in the finished device, which is useful for products that do not require field re-programming. The 24 I/O lines provide substantial peripheral connectivity for switches, sensors, indicators, actuators, and other discrete control signals. The Z8 architecture is designed for efficient embedded control rather than high-throughput computation. Its 8-bit internal architecture, organized program memory, and dedicated I/O capabilities support compact control loops and cost-sensitive product designs. EBI and EMI connectivity adds external-interface flexibility, while the 4.5 V to 5.5 V operating range supports conventional 5 V equipment. Because the program memory is OTP rather than flash, firmware should be finalized and tested before the programmed devices are released. Typical uses include appliance controllers, small motor-control systems, security and access-control equipment, LED-control modules, industrial interface boards, and compact consumer products. The 24 available I/O lines are particularly useful when a design requires multiple discrete inputs and outputs but does not need a large external memory interface. A 12 MHz clock also provides adequate processing performance for sensor sampling, state-machine logic, and simple communication protocols. PCB design should account for all 28 package leads and route sensitive signals away from noisy switching nodes. Confirm oscillator, reset, programming, and I/O assignments against the manufacturer pin-description table before layout release. Because OTP devices cannot be erased, production planning should include firmware verification and controlled programming to avoid unrecoverable program-memory errors. This product page combines the Z86E3312SSC architecture, package details, application guidance, and verified sourcing information with an explicit focus on design consequences. It also distinguishes confirmed drop-in replacements from merely related Z8 products, helping engineers avoid selecting a device with a different package or pinout.

RFQ Contact
Z86E3312SSG - 8-Bit 12MHz OTP Microcontroller | Zilog
Z86E3312SSG

Z86E3312SSG - 8-Bit 12MHz OTP Microcontroller | Zilog

Zilog Z86E3312SSG is an 8-bit Z8 microcontroller with a 12 MHz clock, 4 KB of one-time-programmable memory organized as 4K x 8, and 24 I/O ports. The device operates from a 4.5 V to 5.5 V supply and is listed as an active part in the Zilog Z86E3312 family. Its combination of OTP program memory, an 8-bit CPU, and a 5 V operating range makes it suitable for embedded control products requiring fixed-program logic and broad I/O access. An 8-bit microcontroller is a compact embedded-processing device that executes firmware from internal program memory and reads inputs through configurable digital ports. The Z86E3312 belongs to the Z8 family, a hierarchy that includes 8-bit microcontrollers, embedded processors, integrated circuits, and semiconductors. Zilog designed this controller for cost-sensitive appliances, access controls, industrial interfaces, and other systems where deterministic digital control is more important than high memory capacity or high-speed computation. The principal device parameters include a 12 MHz maximum clock frequency, 4 KB of OTP program memory, an 8-bit data bus, 24 I/O ports, and a 4.5 V to 5.5 V supply-voltage range. OTP memory allows the application program to be written during manufacturing and prevents subsequent modification, which supports application locking and production traceability. The 24 available I/O lines provide substantial connectivity for switches, sensors, indicators, relays, and communication peripherals. The Z86E3312SSG is identified as part of the Zilog Z8 microcontroller series and uses the SSG ordering code. Distributor records associate the device with the Z86E3312 family and identify its lifecycle as active. Because the detailed package dimensions, pin assignments, interrupt architecture, timer resources, and electrical timing limits are not stated in the cited product records, engineers should use the manufacturer datasheet and its pin-description table before finalizing a PCB layout. Typical uses for this controller include industrial control panels, appliance control boards, security and access-control equipment, programmable logic controllers, and compact instrumentation. In these applications, the 24 I/O ports can distribute control signals across a compact board, while the 12 MHz clock provides sufficient throughput for sequential logic, debouncing, state-machine execution, and periodic interface servicing. OTP programming is particularly appropriate when the finished control logic must remain fixed. The main design consideration is to verify the complete pinout, pin multiplexing, and peripheral assignments against the manufacturer datasheet before PCB routing. Designers should also confirm that every attached signal remains compatible with the 4.5 V to 5.5 V supply range and that firmware timing accounts for the 12 MHz operating limit. A Request a Quote form is available on this page for current commercial availability, lead time, and quantity requirements. This product record combines the exact Z86E3312SSG identity, core electrical and memory characteristics, lifecycle information, practical embedded-control applications, sourcing guidance, and a conservative drop-in assessment. It is designed to help engineers evaluate whether the MCU fits a fixed-program 8-bit design while separating confirmed specifications from details that still require direct manufacturer-document verification.

RFQ Contact
Z86E3312VSC - 8-Bit 12MHz 4KB OTP MCU | Zilog | Embedded Control
Z86E3312VSC

Z86E3312VSC - 8-Bit 12MHz 4KB OTP MCU | Zilog | Embedded Control

The Zilog Z86E3312VSC is an 8-bit Z8 microcontroller operating at up to 12 MHz, with 4 KB of one-time-programmable memory in a 28-pin PLCC package. It is designed for compact embedded-control tasks requiring a modest instruction set, one-time-programmable firmware storage, and a surface-mount package suitable for automated assembly. An 8-bit microcontroller is a semiconductor integrated circuit that executes embedded-control instructions from fixed program memory and interacts with external hardware through digital and analog peripherals. Within the product hierarchy, the Z86E3312VSC belongs to the microcontroller class of embedded processors. Its Z8 architecture is intended for cost-sensitive control logic, while the 4 KB OTP program memory is best suited to relatively compact firmware rather than connectivity-heavy or graphics-oriented applications. Key device characteristics include an 8-bit processor core, 4 KB of OTP program memory, a 12 MHz operating frequency, and a 28-pin J-lead PLCC package. OTP memory allows the final firmware image to be programmed during manufacturing, which is useful for products whose firmware is stable and does not require field updates. The 12 MHz clock rate provides additional processing headroom for peripheral servicing and structured control routines compared with slower general-purpose 8-bit controllers. The PLCC package provides a defined lead arrangement and supports compact, high-density PCB layouts, although it requires adequate spacing and controlled assembly for its J-shaped leads. Because the MCU is designed around OTP rather than flash memory, engineers should establish the firmware requirements and programming process early in development. The manufacturer datasheet remains the authoritative source for clock, electrical, timing, programming, and peripheral details before schematic capture. Typical uses include simple industrial control modules, appliance controllers, building automation endpoints, lighting controllers, sensor-conditioning systems, and compact embedded products where 4 KB of OTP code is sufficient. The device is also appropriate for low-cost dedicated controllers that monitor digital inputs, operate actuators, and require deterministic operation without user-accessible firmware updates. The primary design consideration is program-memory capacity. Engineers should confirm that application code, interrupt handlers, lookup tables, and boot requirements fit within 4 KB before selecting the MCU, and should verify all 28 package connections against the manufacturer pin description. Clock settings, timing margins, I/O limits, and programming signals must also be reviewed in the manufacturer datasheet before release to production. This product record combines the exact package and core specifications, practical embedded-control applications, structured comparison parameters, and design guidance for engineers evaluating the Z86E3312VSC. It is intended to accelerate component selection while keeping final design decisions tied to the manufacturer documentation.

RFQ Contact
Z86E3412PSC - 8-Bit 12MHz OTP Microcontroller | Zilog
Z86E3412PSC

Z86E3412PSC - 8-Bit 12MHz OTP Microcontroller | Zilog

The Zilog Z86E3412PSC is an 8-bit Z8 CMOS microcontroller operating at up to 12 MHz, with 16 KB of one-time-programmable program memory, 237 bytes of RAM, and a 28-pin PDIP package. It is designed for compact embedded-control systems that require deterministic digital I/O, low-cost ROM-based program storage, and operation from a 3.5 V to 5.5 V supply. A microcontroller is a programmable semiconductor that combines a CPU core, memory, and peripheral functions on one integrated circuit. The Z8 belongs to the broader 8-bit microcontroller category within embedded processors and embedded logic devices. The Z86E3412PSC uses one-time-programmable memory, allowing the application program to be written once during manufacturing or final programming rather than rewritten in the field. The device features an 8-bit data bus, a maximum clock frequency of 12 MHz, and 16 KB organized as 16K x 8 bits of OTP program memory. Its 237 bytes of RAM provide working space for variables, stack operations, and control state. The commercial-temperature component is supplied in a through-hole PDIP-28 package, simplifying prototype assembly, inspection, and hand soldering. The Z8 core is intended for embedded applications where modest computational throughput is sufficient. At 12 MHz, the device can handle digital control, sequencing, keypad or switch input processing, discrete output control, and status indication without requiring a separate processor. Because program storage is OTP rather than reprogrammable flash, firmware changes require a new programmed device, so firmware validation must occur before final programming. Typical uses include appliance control panels, small industrial control modules, instrumentation interfaces, programmable timers, LED status systems, and dedicated sequence controllers. The 28-pin through-hole format is particularly useful where boards are assembled manually or where a socketed controller simplifies replacement during prototype validation. The absence of USB, SPI, I2C, UART, and CAN channels makes it most appropriate for designs centered on parallel digital control rather than modern serial connectivity. Designers should plan the power rail for 3.5 V to 5.5 V operation and assign unused pins according to the manufacturer pin-description table. Because OTP memory cannot be erased, validate the complete firmware image before programming the production parts. Confirm reset, oscillator, and I/O requirements against the Zilog datasheet before releasing the PCB footprint. This page combines the Z86E3412PSC device specifications, package details, sourcing information, comparison parameters, and practical design guidance in one engineering-focused reference. It also identifies the directly comparable Z86E3412PSG and clearly distinguishes what is confirmed from information that requires confirmation.

RFQ Contact
Z86E3412PSG - 8-Bit 12MHz 16KB OTP MCU | Zilog
Z86E3412PSG

Z86E3412PSG - 8-Bit 12MHz 16KB OTP MCU | Zilog

Zilog, Inc. Z86E3412PSG is an 8-bit CMOS Z8 microcontroller operating at up to 12 MHz, with 16 KB of one-time-programmable program memory in a 28-pin through-hole DIP package. Its operating supply range is 5.00 V to 5.50 V, making it a directly powered embedded-control component for compact legacy-control systems. An MCU, or microcontroller, is a single semiconductor integrating a processor core, program memory, data memory, and peripherals on one die. Within the embedded-control hierarchy, the Z8 family belongs to the broader category of 8-bit microcontrollers and combines a compact instruction set with application-specific peripherals. Its OTP memory makes the device suitable for products where firmware is finalized during manufacturing and field reprogramming is unnecessary. The principal specifications of the Z86E3412PSG are its 8-bit CPU architecture, 12 MHz maximum clock frequency, and 16 KB OTP program memory organized as 16K x 8. The device is identified as a CMOS Z8 microcontroller, while the manufacturer and distributor listings place it in the 28-pin DIP class. These characteristics distinguish it from devices that require external program memory or provide flash-based field updates. The Z86E3412PSG belongs to the Z86E3412 family and is designed for embedded control rather than high-performance computing. OTP program storage gives the manufacturer a defined, permanently programmed firmware path and can support repeatable production across an appliance or controller. The 12 MHz operating rate provides more timing headroom than many low-pin-count 8-bit controllers while retaining the simplicity of a compact MCU architecture. Typical applications include dedicated appliance controllers, small motor-control boards, keypads, sensor-interface modules, and simple sequence controllers. Its 28-pin DIP format is useful for prototypes, repairable assemblies, and through-hole production where a QFP package would be unnecessary. A system designer should verify peripheral assignments, interrupt behavior, and timing requirements against the device's pin description and application information. A critical design consideration is that OTP memory cannot be erased and rewritten in the field. Firmware changes therefore require a new programmed device or a board-level replacement strategy. Decoupling, oscillator layout, I/O drive, and programming should be implemented according to the manufacturer datasheet, especially in electrically noisy motor or relay-control environments. This product page combines the manufacturer device identity with focused design guidance, verified package and memory details, application analysis, and same-family replacement considerations. It is intended to help engineers confirm fit, assess programming constraints, and plan a reliable embedded-control implementation before requesting an order.

RFQ Contact
Z86E3412SEG - 8-Bit 12MHz 16KB OTP MCU | Zilog
Z86E3412SEG

Z86E3412SEG - 8-Bit 12MHz 16KB OTP MCU | Zilog

The Zilog Z86E3412SEG is an 8-bit Z8 microcontroller operating at 12 MHz with 16 KB of one-time-programmable memory in a 28-pin SOIC package. Its operating voltage range is 3.5 V to 5.5 V, making it suitable for embedded control systems that require a compact, nonvolatile program memory and an 8-bit processing architecture. A microcontroller is a programmable semiconductor that integrates a CPU core, program memory, data memory, and peripherals into one device. The Z8 belongs to the broader 8-bit MCU category, where the embedded processor executes firmware to monitor inputs and control outputs. Unlike a general-purpose microprocessor, the Z86E3412SEG is designed for compact embedded-control tasks such as appliance control, simple industrial interfaces, and embedded peripheral control. The Z86E3412SEG's principal specifications include its 8-bit CPU, 12 MHz operating frequency, and 16 KB of OTP memory. The OTP program memory provides a stable, nonvolatile place for firmware because its contents cannot be erased after programming. The device is also listed with 237 bytes of data memory and a 3.5 V to 5.5 V supply range. Its 28-SOIC package supports conventional PCB assembly and is available in a 300 mil body format. The Z8 architecture is intended for straightforward embedded workloads where deterministic control, compact code size, and low component count are more important than high computational throughput. At 12 MHz, the processor is suitable for polling multiple inputs, executing control logic, communicating through serial peripherals, and managing discrete or analog interface functions. Exact peripheral assignments, interrupt behavior, and electrical limits should be checked against the manufacturer documentation before final circuit implementation. Typical uses include household appliance controllers, small motor-control boards, temperature or level monitoring products, programmable interface modules, and compact industrial automation equipment. In these systems, the MCU can execute startup routines, acquire sensor information, update displays or indicators, and operate actuator outputs while keeping the external hardware count low. Designers should begin with the manufacturer's pin-description table when assigning PCB nets and should preserve the device's documented power, ground, reset, clock, and programming connections. Because the MCU is intended for OTP programming, firmware development must account for the non-erasable program memory. Decoupling, oscillator stability, programming access, and unused-pin treatment should follow the device's recommended application circuit and layout guidance. This product page consolidates the exact orderable MPN, core architecture, memory and frequency specifications, package details, sourcing guidance, and engineering considerations. It also distinguishes confirmed orderable information from characteristics that require the manufacturer datasheet, helping engineers plan sourcing and hardware development without confusing this 28-SOIC device with packages or variants that have different pin assignments.

RFQ Contact
Z86E3412SSG - 12MHz 16KB OTP 8-Bit MCU | Zilog
Z86E3412SSG

Z86E3412SSG - 12MHz 16KB OTP 8-Bit MCU | Zilog

The Zilog Z86E3412SSG is an 8-bit Z8 Z8 One-Time Programmable microcontroller with a 12 MHz clock, 16 KB of OTP program memory organized as 16K x 8, and a 28-pin SOIC package. It is designed for embedded control applications that require a compact 8-bit controller, nonvolatile program storage, and a peripheral-oriented MCU architecture. An 8-bit microcontroller is a microprocessor and embedded-control IC built around an 8-bit processing architecture. The Z8 family belongs to the broader hierarchy of embedded processors, microcontrollers, and semiconductors. One-time programmable memory allows firmware to be written once during manufacturing or programming, providing nonvolatile program storage without the removable-program-memory cost of EEPROM. This makes the Z86E3412SSG suitable for fixed-function products whose firmware does not need field updates. The principal device characteristics include a 12 MHz operating frequency, 16 KB of OTP program memory, 8-bit processing, CMOS construction, and a 28-pin SOIC package. The reported operating-temperature range for this exact ordering code is 0°C to +70°C. The part is also identified as Pb-free, although separate RoHS, REACH, and halogen-free declarations were not included in the supplied source data and therefore remain unconfirmed. The 12 MHz clock rate provides the timing headroom expected from a Z8-class embedded controller, while the 16K x 8 OTP organization determines the available program address space. Because the source data does not provide RAM capacity, I/O pin assignments, peripheral inventories, electrical limits, watchdog behavior, or timing characteristics, those details must be confirmed in the manufacturer datasheet before a board design is released. Typical uses include fixed-function industrial controllers, appliance-control panels, small instrument controllers, status interfaces, and embedded control modules where an 8-bit processor and OTP firmware storage are sufficient. Its 28-pin SOIC package also supports conventional surface-mount assembly, but package dimensions, pin geometry, and exposed thermal requirements are not included in the supplied evidence. For new layouts, engineers should verify the complete 28-pin pinout, required decoupling, oscillator connection, programming method, reset requirements, and absolute maximum ratings against the official datasheet. The OTP programming process should also be coordinated with manufacturing because an incorrectly programmed device generally cannot be rewritten like flash memory. This page consolidates the verified distributor listings, an identified same-package family alternative, package constraints, pricing evidence, and engineering-selection guidance. It also clearly separates confirmed Z86E3412SSG facts from electrical and programming details that require manufacturer documentation.

RFQ Contact
Z86E4016AEG - 8-Bit 16MHz OTP Microcontroller | Zilog
Z86E4016AEG

Z86E4016AEG - 8-Bit 16MHz OTP Microcontroller | Zilog

Zilog Z86E4016AEG is an 8-bit Z8 CISC microcontroller with a 16 MHz operating frequency, 4 KB of one-time-programmable program memory, and 236 bytes of RAM, packaged in a 44-pin LQFP measuring 10 mm by 10 mm. The device operates from a 4.5 V to 5.5 V supply and targets compact embedded-control systems requiring embedded flash-equivalent program storage, serial I/O, timers, and a surface-mount footprint. An 8-bit microcontroller is a compact embedded-control IC that executes firmware from program memory and uses dedicated peripherals to sense inputs, control outputs, and communicate with external circuits. Zilog's Z8 family combines a simple CISC-style architecture with integrated timers, serial interfaces, and interrupt support. In the broader semiconductor hierarchy, this device belongs to the microcontroller, embedded-processor, and integrated-circuit categories. The Z86E4016AEG's main engineering characteristics include 16 MHz operation, 4 KB of OTP memory, 236 bytes of data RAM, and a 4.5 V to 5.5 V operating range. OTP memory permits a programmed device to be installed directly into production hardware without permitting subsequent firmware changes. The 44-pin LQFP also exposes more I/O and peripheral connections than a small-package microcontroller, making the part suitable for products that require several discrete control functions. The Z8 core uses an 8-bit datapath and is designed for straightforward embedded applications rather than high-throughput computation. Firmware must fit within the 4 KB program-memory limit, while the 236-byte RAM constrains simultaneously retained data structures and stack usage. Designers should therefore use interrupt-driven routines, compact state tables, and peripheral hardware where practical. The 5 V supply range also allows the controller to operate directly from regulated 5 V industrial or consumer rails after appropriate filtering and decoupling. Typical uses include appliance controllers, small motor-control boards, keypad interfaces, LED status indicators, temperature-measurement systems, simple serial bridges, and dedicated embedded-control panels. The LQFP package can be assembled by conventional surface-mount equipment, while its relatively high pin count provides access to multiple I/O, timer, interrupt, and serial-interface functions. Applications requiring field-updatable firmware should use a flash-memory MCU instead because the Z86E4016AEG provides OTP rather than rewritable program memory. Decouple the 5 V supply close to the device with suitable high-frequency and bulk capacitance, route oscillator and reset-related connections away from noisy switching nodes, and follow the manufacturer pin-assignment guidance when allocating board space. Because program memory is one-time programmable, validate the complete firmware image and production programming process before committing components to a build. This product overview combines electrical characteristics, package constraints, application guidance, programming implications, and practical design considerations to support component selection, PCB planning, and embedded-system implementation.

RFQ Contact
Z86E4016ASG - 8-Bit 16MHz OTP Microcontroller | Zilog
Z86E4016ASG

Z86E4016ASG - 8-Bit 16MHz OTP Microcontroller | Zilog

The Zilog Z86E4016ASG is an 8-bit Z8 microcontroller operating at up to 16 MHz, with 4 KB of one-time programmable program memory, 236 bytes of RAM, and 32 general-purpose I/O pins in a 44-pin LQFP package measuring 10 mm by 10 mm. Its operating supply range is 3.5 V to 5.5 V, and the device is specified for a 0°C to +70°C ambient temperature range. A microcontroller is an integrated circuit dedicated to executing embedded control software. The Z8 family belongs to the broader hierarchy of embedded processor, microcontroller, semiconductor, and electronic-control categories. It combines a processor core, nonvolatile program storage, volatile data memory, digital I/O, and integrated timing functions on one device, allowing compact designs for control, monitoring, and user-interface applications. The Z86E4016ASG provides 4 KB of OTP memory organized as 4K x 8, along with 236 x 8 bytes of RAM. Its 16 MHz operating rate supports efficient sequential instruction execution, while 32 general-purpose I/O pins provide a broad interface for switches, indicators, sensors, actuators, and external logic. Built-in power-on reset and watchdog-timer functions support dependable startup and recovery after a program fault. An internal oscillator simplifies board design by removing the need for an external clock source in a basic configuration. The device combines that oscillator with the Z8 core, OTP program memory, RAM, I/O ports, power-on reset, and watchdog timer in a 44-pin LQFP-44 package. The 10 mm by 10 mm surface-mount format supports compact production assemblies while retaining a generous pin count for mixed-signal and control-oriented products. Typical uses include industrial control panels, appliance controllers, building equipment, simple security systems, digital input/output modules, and compact embedded products. The 32 I/O pins make the device useful where several external switches, indicators, relays, or sensors must be coordinated by a single controller. Applications requiring one-time programmable firmware benefit from the OTP architecture because the finished program cannot be electrically rewritten. When designing a board, confirm every signal against the Z86E4016ASG pin description before assigning PCB tracks. Decoupling requirements, oscillator behavior, reset timing, and unused-pin treatment should follow the manufacturer datasheet. The 3.5 V minimum operating voltage and 5.5 V maximum operating voltage also determine the compatible sensor and actuator interface ranges. This product page consolidates the verified device specifications, sourcing information, engineering-use guidance, and a qualified comparison framework. Because the Z8 family's programming and peripheral configuration are application-specific, engineers should also consult the manufacturer documentation for the complete pin-description table and device operating characteristics.

RFQ Contact
Z86E4016FEC - 8-Bit 16MHz 4KB OTP MCU | Zilog | LQFP-44
Z86E4016FEC

Z86E4016FEC - 8-Bit 16MHz 4KB OTP MCU | Zilog | LQFP-44

Zilog, Inc. Z86E4016FEC is an 8-bit Z8 microcontroller with a 16 MHz maximum operating frequency, 4 KB of one-time-programmable program memory, and a 44-LQFP surface-mount package measuring 10 mm by 10 mm. It integrates 32 general-purpose I/O pins, power-on reset, and a watchdog timer for compact embedded-control designs. An 8-bit microcontroller is a programmable integrated circuit designed around an eight-bit processor and a set of dedicated peripherals. Within the embedded-control hierarchy, the Z86E4016FEC belongs to the Z8 family of Zilog microcontrollers and provides a combination of processor throughput, OTP program storage, digital I/O, reset supervision, and watchdog protection in one device. The principal features include 8-bit processing at up to 16 MHz, 4 KB of OTP program memory, and 32 general-purpose I/O pins. Two 8-bit timers are also identified in the verified technical listing. OTP memory provides a permanent on-chip program store, which can be appropriate for cost-sensitive products in which firmware does not require field updates. The device uses the Z8 architecture and is intended for embedded products requiring straightforward digital control rather than high-bandwidth processing. Its 16 MHz operating speed supports control loops, button and sensor handling, indicator updates, and peripheral coordination. The integrated power-on reset and watchdog timer help establish reliable startup behavior and recover from certain software faults. Typical application areas include industrial control panels, appliance controllers, building equipment, simple motor-control interfaces, and dedicated embedded modules. The 44-LQFP package provides 32 general-purpose I/O pins, allowing a design to connect multiple sensors, switches, displays, and actuators while leaving fewer functions to external logic. Design planning should focus on OTP programming timing, available RAM, pin multiplexing, oscillator configuration, and programming-tool compatibility. Because the verified data does not provide a complete pin list, voltage limits, or thermal ratings, those details must be confirmed against the official Zilog documentation before schematic capture or PCB release. This product page consolidates verified distributor specifications, package information, application guidance, and verified sourcing links. It also clearly separates confirmed data from unavailable specifications, helping engineers make sourcing and design decisions without treating unverified electrical details as guaranteed facts.

RFQ Contact
Z86E4016FEG - 8-Bit 16MHz OTP Microcontroller | Zilog
Z86E4016FEG

Z86E4016FEG - 8-Bit 16MHz OTP Microcontroller | Zilog

The Zilog Z86E4016FEG is an 8-bit Z8 microcontroller with 4 KB of one-time-programmable program memory, 236 x 8 bits of RAM, 32 I/O pins, and a maximum operating speed of 16 MHz. It is housed in a 44-LQFP surface-mount package measuring 10 x 10 mm. The device also includes an internal oscillator, Power-On Reset (POR), and a Watchdog Timer (WDT), providing the core resources for compact embedded control designs. An 8-bit microcontroller is a microprocessor integrated with memory, I/O, and supporting peripherals on one integrated circuit. Within the semiconductor hierarchy, the Z86E4016FEG is an MCU, a microcontroller, and an embedded processing IC designed for control-oriented tasks rather than high-throughput computation. Its OTP program memory allows firmware to be programmed once during manufacturing or final assembly, while its 236-byte RAM supports working variables, stack operations, and short-lived application data. The principal feature set includes 4 KB of OTP program memory, 236 x 8 bits of RAM, 32 general-purpose I/O pins, and a 16 MHz operating speed. An internal oscillator reduces the need for an external clock source in applications that do not require an extremely precise timing reference. The Power-On Reset establishes a known startup state, while the Watchdog Timer helps recover the controller from an unintended stalled execution sequence. The Z86E4016FEG belongs to the Zilog Z8 family, an 8-bit MCU architecture commonly used for appliance control, simple industrial interfaces, embedded instrumentation, and compact control panels. Its 32 I/O pins provide substantial external connectivity relative to smaller 8- and 16-pin devices, making the device useful for keypads, displays, sensors, relay logic, and communication peripherals when their electrical requirements are compatible with the MCU's specifications. The 44-LQFP package supports surface-mount assembly but requires careful land-pattern design and adequate pin escape routing. Published source material states that total package power dissipation should not exceed 1.2 W under the indicated stress conditions. Designers should therefore verify the complete operating-voltage, input-pin, clock, and output-drive budget against the manufacturer datasheet before releasing a production PCB. This product page consolidates the verified Z86E4016FEG specifications, package details, source links, engineering guidance, and replacement analysis. It also clearly separates verified facts from unavailable electrical details, helping engineers avoid assumptions about voltage limits, timer channels, communications peripherals, or pin-level functions that are not present in the supplied source data.

RFQ Contact
Z86E4016FSC - 16MHz 8-Bit OTP Microcontroller | Zilog
Z86E4016FSC

Z86E4016FSC - 16MHz 8-Bit OTP Microcontroller | Zilog

Zilog, Inc. Z86E4016FSC is an 8-bit Z8 microcontroller operating at 16 MHz with 4 KB of one-time-programmable memory in a 44-LQFP 10 x 10 mm package. It is designed for compact embedded control systems that require deterministic 8-bit processing, OTP program storage, and a relatively high pin count for mixed-signal and peripheral connections. A microcontroller is a programmable semiconductor that integrates a processor core, program memory, data memory, I/O ports, and supporting peripherals onto one device. The Z86E4016FSC belongs to the Z8 family of 8-bit microcontrollers, combining simple instruction-based control with integrated embedded resources. Its 16 MHz operating speed supports responsive control loops in applications that do not require the processing power or memory bandwidth of a 16-bit or 32-bit MCU. The most important headline characteristics are its 16 MHz clock rate, 4 KB OTP program memory, and 8-bit architecture. Because OTP memory is programmed once during manufacturing or provisioning, the device is well suited to products whose firmware and configuration are fixed before shipment. This differs from a field-programmable Flash MCU, making OTP convenient for cost-sensitive volume production but unsuitable when frequent firmware updates are required. The 44-LQFP package provides substantially more connection options than a small 8- or 20-pin controller. That pin count can accommodate digital I/O, control outputs, communications, analog functions, and programming or debug signals more flexibly. However, the exact pin assignments, peripheral mix, voltage limits, and electrical characteristics must be confirmed in the manufacturer datasheet before the package is assigned to a PCB layout. Typical uses include appliance controllers, building-control interfaces, industrial control modules, keyboard and human-interface controllers, sensor-conditioning systems, and small embedded products with fixed firmware. The 16 MHz clock and 8-bit architecture are particularly appropriate for supervisory control, state-machine execution, signal scanning, and actuator coordination rather than high-bandwidth data processing. Designers should begin with the manufacturer pin-description table and electrical characteristics, then verify oscillator, reset, programming, and I/O requirements against the intended schematic. Because the program memory is OTP, firmware validation and manufacturing-programming workflow must be completed before devices are committed to a production build. This page consolidates the core Z86E4016FSC identity, verified package and memory characteristics, sourcing guidance, replacement considerations, and practical selection criteria into a concise engineering reference. It is intended to accelerate initial design review while directing final PCB, firmware, and qualification decisions to the authoritative manufacturer documentation.

RFQ Contact
Z86E4016PEG - 16MHz 8-Bit OTP Microcontroller | Zilog
Z86E4016PEG

Z86E4016PEG - 16MHz 8-Bit OTP Microcontroller | Zilog

Zilog Z86E4016PEG is an 8-bit Z8 CISC microcontroller operating at 16 MHz, with 4 KB of one-time-programmable program memory, 236 bytes of RAM, and 32 I/O lines in a 40-pin PDIP package. It operates from 4.5 V to 5.5 V and is designed for cost-sensitive embedded control systems requiring a compact peripheral set and deterministic embedded processing. A microcontroller is an integrated circuit containing a processor core, program memory, data memory, I/O ports, and embedded peripherals on one die. The Z86E4016PEG belongs to the Z8 family of 8-bit microcontrollers, a cost-effective architecture widely used for appliance control, industrial interfaces, simple instrumentation, and dedicated automation. Its CISC instruction set is designed for efficient control-oriented code and short development cycles. The device provides 4 KB of OTP program memory, allowing firmware to be programmed once after development. Its 236 x 8 bytes of RAM provide working storage for variables, stack operations, and application data. With 32 I/O lines, the MCU can connect directly to digital sensors, switches, indicator circuits, displays, and external control devices. Integrated Power-On Reset and Watchdog Timer functions support dependable startup and recovery behavior. The 16 MHz operating frequency provides a practical balance between processing throughput, power consumption, and design complexity for embedded control tasks. The internal oscillator eliminates the need for an external clock in applications that do not require precise timing references. The 4.5 V to 5.5 V operating range supports conventional industrial and consumer logic environments, while the 40-pin PDIP package supports conventional through-hole PCB assembly and prototyping. Typical applications include appliance controllers, small motor-control interfaces, digital input/output modules, LED sequencing systems, temperature-control products, and industrial control boards. The 32 available I/O lines make it especially useful when multiple discrete inputs and outputs must be managed without adding another interface IC. Firmware can implement debouncing, state machines, interlocks, fault handling, and communication routines. Designers should verify the complete pin assignment and peripheral multiplexing in the manufacturer datasheet before assigning signals. Because the program memory is OTP rather than rewriteable flash, firmware changes after programming require a different device and a complete replacement. Decoupling, grounding, and reset circuitry should follow the datasheet layout recommendations, and unused I/O pins should be assigned deliberately rather than left without a defined state. This product page combines the Z8 microcontroller specifications, verified package and memory information, same-package replacement references, application guidance, and design considerations. It is intended to help engineers evaluate firmware fit, pin compatibility, OTP programming constraints, and PCB assembly requirements before selecting the Z86E4016PEG.

RFQ Contact
Z86E4016PSG - 8-Bit 16MHz OTP Microcontroller | Zilog
Z86E4016PSG

Z86E4016PSG - 8-Bit 16MHz OTP Microcontroller | Zilog

The Zilog Z86E4016PSG is an 8-bit Z8 microcontroller with a 16 MHz maximum clock frequency and 4 KB of one-time-programmable program memory. It is packaged in a 40-pin through-hole dual inline package and is positioned for cost-sensitive, high-volume embedded control applications. The device combines a Z8 CPU core with 236 bytes of data RAM and operates as a compact embedded controller for consumer, automotive, security, and HVAC equipment. The Z86E4016PSG is designed around one-time-programmable memory, which allows the final firmware image to be written during manufacturing and removes the need for external reprogrammable flash. Its 4 KB program memory is intended for compact control loops, keypad and panel management, sensor conditioning, actuator control, and simple protocol handling. The 16 MHz clock provides adequate processing headroom for deterministic control functions without requiring a high-pin-count package. Important device characteristics include the Z8 CPU architecture, 236 bytes of data RAM, 4 KB OTP program memory, and a 40-DIP package. The Z8 family is intended for applications where cost, simplicity, and compact control are more important than high-capacity firmware storage or extensive connectivity. The through-hole package also supports conventional through-hole PCB assembly and is suitable for designs using socketed or manually assembled boards. Typical application areas include consumer appliances, automotive accessory modules, security and access-control equipment, HVAC controllers, and small industrial control panels. The Z86E4016PSG is especially useful when the control algorithm is stable and the product can be programmed once during production. Designers should plan the firmware size carefully because OTP memory cannot be rewritten, and should use the manufacturer pin-description table when assigning PCB tracks and I/O functions. For new designs, check the manufacturer datasheet for electrical limits, clock configuration, port behavior, and programming details before layout release. This page combines verified distributor listings, the manufacturer datasheet reference, package information, and practical selection guidance for engineers evaluating a 40-pin 8-bit OTP controller.

RFQ Contact
Z86E4016VSG - 8-Bit 16MHz OTP Microcontroller | Zilog
Z86E4016VSG

Z86E4016VSG - 8-Bit 16MHz OTP Microcontroller | Zilog

The Zilog Z86E4016VSG is an 8-bit Z8 microcontroller with 16 MHz clock speed, 4 KB of one-time-programmable ROM, 32 I/O lines, and a PLCC-44 surface-mount package. The device operates from a 4.5 V to 5.5 V supply and is intended for embedded control applications requiring an 8-bit data bus and compact peripheral integration. A microcontroller is a programmable semiconductor that combines a processor core, program memory, data memory, I/O ports, timers, and communication interfaces on one integrated circuit. The Z86E4016VSG belongs to the Z8 Classic family of 8-bit embedded processors. It is positioned between general-purpose microcontrollers and larger 16-bit or 32-bit control platforms, providing sufficient performance for appliance controls, industrial interfaces, instrumentation, and embedded peripheral control. The principal specifications are a 16 MHz clock speed, 4 KB of OTP program memory, 236 bytes of RAM, and 32 I/O lines. The 8-bit bus architecture simplifies connection to common peripherals, while the 44-pin PLCC package provides a substantial lead count for digital input/output functions and control signals. Programmable OTP options include an RC oscillator, EPROM protection, and automatic latch disable, as identified in the manufacturer family information. The Z8 architecture is designed for compact embedded control rather than high-throughput computing. Its 8-bit data path and 16 MHz operating clock are well suited to sequential control logic, signal conditioning, keypad and switch scanning, lamp or relay control, and communication-interface peripherals. Because program memory is one-time-programmable, the device is appropriate for production designs where a fixed firmware image is assigned during manufacturing. Typical uses include industrial control modules, test and measurement equipment, appliance controllers, building-control interfaces, and compact embedded systems. The PLCC-44 package also supports socket-based prototypes and serviceable assemblies, while a surface-mount implementation provides a compact permanent PCB footprint. The 4.5 V to 5.5 V supply range supports conventional 5 V logic systems. Designers should verify oscillator, timing, reset, and port requirements against the Z86E40 family documentation before schematic capture. OTP programming must be planned as a manufacturing step, and the permanent-programming decision should be reviewed against field-update requirements. The 44-pin PLCC footprint should also be checked for thermal performance and assembly compatibility. This product page consolidates the device specifications, verified source links, package characteristics, application guidance, and drop-in replacement status. It also distinguishes electrically similar devices that use different packages, preventing a footprint mismatch from being mistaken for a PCB-compatible replacement.

RFQ Contact
Z86E4312ASG - 8-Bit 12MHz OTP MCU | Zilog | LQFP-44
Z86E4312ASG

Z86E4312ASG - 8-Bit 12MHz OTP MCU | Zilog | LQFP-44

The Zilog Z86E4312ASG is an 8-bit Z8 microcontroller rated at 12 MHz, with 4 KB of one-time-programmable program memory, 236 bytes of RAM, and a 44-lead LQFP package measuring 10 mm by 10 mm. It operates from 3.5 V to 5.0 V and integrates 32 I/O lines, six interrupt sources, two timers, two comparators, a watchdog timer, power-on reset, and low-voltage protection. An 8-bit microcontroller is a compact processor designed to execute embedded control instructions, read sensor inputs, update outputs, and manage communication or timing functions. The Z8 family belongs to the broader hierarchy of embedded processors, microcontrollers, and programmable control semiconductors. Its one-time-programmable memory permits a finished device to be programmed once for its intended control application. The principal features of the Z86E4312ASG support space-constrained control systems requiring a moderate amount of program memory. Its 12 MHz operating speed provides processing capacity for sequential control tasks, while 32 I/O lines offer substantial connectivity for switches, indicators, sensors, actuators, and external bus devices. Six interrupts and two timers support event-driven operation, while the watchdog timer helps recover the controller after faults. The Z86E4312ASG also includes two analog comparators, power-on reset, and low-voltage protection. These resources reduce the need for separate peripheral devices in suitable systems. The EBI/EMI interface provides a route for external bus communication, allowing the controller to work with additional memory or peripheral circuits when the application requires more connectivity than the general-purpose I/O pins provide. Typical uses include industrial control panels, appliance controllers, small motor-control boards, security and access-control units, instrumentation, and embedded products with multiple discrete inputs and outputs. Its 4 KB OTP program memory is most appropriate for compact control loops, state machines, product selection logic, and supervisory functions rather than resource-intensive connectivity or graphics processing. When designing around this device, verify the 3.5 V to 5.0 V operating range against every external circuit and signal level. Treat the 236 bytes of RAM as a strict working-memory budget, and assign program memory carefully because OTP cannot be rewritten. PCB planning should preserve access to all 44 LQFP leads and provide suitable decoupling and signal-routing margins. This product page combines the Z86E4312ASG electrical specifications, package information, application guidance, design considerations, and a parameter-level comparison with closely related Zilog controllers. It is intended to help engineers assess memory, clock speed, package fit, peripheral requirements, and replacement strategy before releasing a production schematic or PCB design.

RFQ Contact
Z86E4312FSC - 8-Bit 12MHz OTP MCU | Zilog | Embedded Control
Z86E4312FSC

Z86E4312FSC - 8-Bit 12MHz OTP MCU | Zilog | Embedded Control

The Zilog Z86E4312FSC is an 8-bit CMOS Z8 OTP microcontroller rated for operation up to 12 MHz, with 4 KB of one-time-programmable program memory and a 44-LQFP package measuring 10 mm by 10 mm. The device is positioned for compact embedded-control designs that require deterministic peripheral integration and application-specific programming rather than field-upgradeable firmware storage. A microcontroller is the central control element of an embedded system. It executes firmware, reads inputs, updates outputs, and coordinates connected peripherals. The Z8 family combines an 8-bit processor architecture with OTP program memory, RAM, timers, and general-purpose I/O in one integrated circuit. OTP memory is programmed once during manufacturing or board assembly and cannot subsequently be erased or rewritten. The Z86E4312FSC combines a 12 MHz maximum operating frequency with 4 KB of OTP program memory. A secondary listing identifies 237 bytes of RAM, 24 I/O lines, and two 8-bit timers, while the product description identifies the device as a 4 KB, 12 MHz Z8 microcontroller. These characteristics make the part suitable for compact control products with modest code requirements and multiple digital interfaces. The device uses CMOS technology and is offered in a 44-LQFP surface-mount package. A 10 mm by 10 mm footprint supports compact PCB layouts but requires careful routing between its fine-pitch leads. Its listed I/O quantity and dual timer arrangement can reduce the need for external peripheral components in control, measurement, and actuator-interface systems where the application fits within the available program-memory capacity. Typical applications include industrial keypad and panel controllers, compact instrumentation, appliance control modules, programmable timers, and dedicated interface controllers. OTP programming is particularly appropriate for products whose firmware and configuration are fixed before deployment. For designs requiring field updates, the OTP limitation should be weighed against a controller using rewritable program memory. PCB design should preserve a clean return path around the clock, oscillator, reset, and power pins. Follow the manufacturer’s pin-description table and recommended application circuit when assigning tracks, placing bypass capacitors, and configuring the external crystal or clock source. This product record combines the exact Z86E4312FSC ordering information with package, memory, speed, and interface characteristics. It also highlights programming constraints, verified replacement status, and design considerations that help engineers determine whether this Z8 OTP microcontroller fits the target control system.

RFQ Contact
Z86E4312FSG - 12MHz 8-Bit MCU with 32 I/O | Zilog
Z86E4312FSG

Z86E4312FSG - 12MHz 8-Bit MCU with 32 I/O | Zilog

Zilog Z86E4312FSG is an 8-bit Z8 microcontroller with a 12 MHz maximum operating speed, 4 KB of one-time-programmable program memory, 236 x 8 bits of RAM, and 32 general-purpose I/O pins in a 44-LQFP 10 x 10 mm surface-mount package. It operates from a 3.5 V to 5.5 V supply and is specified for a 0°C to 70°C ambient temperature range. A microcontroller is a programmable semiconductor that combines a CPU core, nonvolatile program memory, volatile data memory, and peripherals on one integrated circuit. The Z8 family belongs to the 8-bit microcontroller hierarchy and provides a compact control platform for embedded products. Z86E4312FSG also supports EBI/EMI connectivity, Power-On Reset, and a Watchdog Timer, allowing it to supervise and control peripheral circuitry in compact industrial or consumer equipment. The device provides 4 KB organized as 4K x 8 bits of OTP program memory and 236 x 8 bits of RAM. Its internal oscillator eliminates the need for an external clock source in designs that can use the specified operating frequency. The 32 I/O pins provide substantial parallel interface capacity, while the 3.5 V to 5.5 V operating range suits conventional 5 V embedded-control equipment. The 44-LQFP package also supports programmed and PCB-manufactured production methods. The Z8 architecture targets straightforward embedded control, including digital input evaluation, output sequencing, timing, and communication. EBI/EMI connectivity expands the available interface options for external memory or related bus-connected functions. Power-On Reset establishes a controlled startup state, while the Watchdog Timer helps recover from unintended program stalls. These integrated resources reduce the number of external support components required for basic embedded-control designs. Typical uses include industrial automation controllers, appliance-control modules, instrumentation interfaces, and compact consumer products. The 32 I/O pins are particularly useful for keypad scanning, display-control signals, relay or switch inputs, status indicators, and external bus connections. The internal oscillator makes the MCU appropriate for cost-sensitive systems where an accurate external time base is not required. Designers should verify every electrical limit and pin function against the manufacturer datasheet before layout is released. OTP program memory is one-time programmable, so firmware validation must occur before programming. Decoupling, grounding, and exposed-pad layout should follow the datasheet recommendations. Because no verified pin names or detailed electrical limits were supplied, the package pinout and several implementation-specific values are intentionally left unresolved rather than guessed. This page combines the verified 12 MHz, 4 KB OTP, 236 x 8-bit RAM, 32 I/O, supply-voltage, temperature, and 44-LQFP specifications with practical application guidance. It also distinguishes the verified same-family alternative and identifies where additional datasheet information is required for a production release.

RFQ Contact
Z86E4312PSG - 8-Bit 12MHz OTP MCU | Zilog
Z86E4312PSG

Z86E4312PSG - 8-Bit 12MHz OTP MCU | Zilog

The Zilog Z86E4312PSG is an 8-bit Z8 OTP microcontroller with a 12 MHz maximum clock, 4 KB of one-time-programmable program memory, 236 bytes of data RAM, and 32 I/O lines in a 40-pin through-hole DIP package. It operates from 3.5 V to 5.5 V and is built with CMOS technology for compact control applications. Its 4K x 8 OTP architecture allows the application firmware to be programmed once, making the device suitable for fixed-function products where field updates are not required. A microcontroller is a programmable control IC that integrates a CPU core, memory, I/O ports, clock circuitry, and reset functions onto one semiconductor device. The Z8 belongs to the 8-bit microcontroller hierarchy and provides a compact platform for reading inputs, executing embedded control logic, and driving outputs. Compared with a discrete logic implementation, it reduces component count, simplifies firmware-based sequencing, and provides deterministic behavior within a defined operating range. Key features of the Z86E4312PSG include 12 MHz maximum operation, 4 KB OTP program memory, 236 bytes of RAM, 32 I/O lines, and a 40-DIP package. The 32 available I/O lines provide substantial connectivity for keypads, displays, sensors, relays, status indicators, and general-purpose digital control. The on-chip oscillator accepts a crystal, ceramic resonator, LC, RC, or external clock source, giving the designer flexibility in clocking and cost control. The device uses the Zilog Z8 core and CMOS process technology. OTP program memory removes the need for a separate nonvolatile memory component, while internal RAM supports stack, variable, and working-data requirements. Because program memory cannot be rewritten after programming, designers should validate firmware and the complete production programming procedure before committing a device population to an assembly line. Typical uses include appliance controllers, small motor-control boards, keyboard and panel interfaces, lighting controllers, industrial sequence modules, and dedicated embedded-control products. The 40-pin through-hole package is particularly convenient for prototypes, through-hole assembly, and designs where a socketed or manually serviced controller is preferred. The broad I/O count also suits designs that combine several discrete sensors and actuators around one central controller. When laying out a board, place the clock components and decoupling capacitors close to their associated pins and route sensitive oscillator signals away from high-current switching nodes. Confirm that the selected oscillator source satisfies the device timing requirements and validate the complete firmware with the final clock configuration. Because the memory is one-time programmable, treat firmware validation and programming as production-gating steps rather than routine board-test activities.

RFQ Contact
Z86E4312VSG - 8-Bit 12MHz 4KB OTP Z8 MCU, 44-LCC | Zilog
Z86E4312VSG

Z86E4312VSG - 8-Bit 12MHz 4KB OTP Z8 MCU, 44-LCC | Zilog

The Zilog Z86E4312VSG is an 8-bit Z8 Z8 series microcontroller with a 12 MHz maximum clock frequency and 4 KB (4K x 8) of one-time-programmable flash program memory, packaged in a 44-pin J-lead plastic leaded chip carrier (44-LCC) surface-mount package. It is a compact 8-bit MCU suited to cost-sensitive control, measurement and appliance-type products. A microcontroller is a single-chip computer that integrates a CPU core, program memory, data memory, timers, serial ports and I/O pins on one die. The Z8 family from Zilog targets embedded control applications where a small, low-cost device must sequence relays, read sensors, drive displays and manage simple communication links. Within the broader semiconductor hierarchy, this device belongs to the microcontroller -> 8-bit MCU -> embedded controller class, and to the power-and-control tier of the device tree rather than to analog or power-semiconductor segments. Key features of this device include 32 configurable I/O lines, an 8-bit internal data bus, and a 4 KB user program area implemented as OTP, meaning the application code is written once and cannot be erased or re-programmed. Supply voltage operation spans 3.5 V to 5.5 V, so the part fits both 5 V legacy systems and 3.3 V-only designs at the lower end of the range. The device also includes an on-chip oscillator, timers and serial communication resources that reduce the external component count of a typical controller board. Technically, the Z86E4312 sits in the Zilog Z86E4x12 sub-family, which pairs a 12 MHz core with a 4 KB OTP memory map. Because program memory is mask-programmable OTP rather than flash, designers must finalize firmware before production and cannot apply field updates through a bootloader, which is the central architectural trade-off of this family. Industrial temperature grading of 0 degrees C to +70 degrees C is specified for the VSG ordering code, and the part is delivered in a surface-mount 44-LCC package that is directly soldered to the board rather than socketed. Typical uses include building-block controller boards, motor and relay sequencers, security keypad scanners, small instrumentation front panels, temperature-control loops in appliances, and LED signage drivers. Because the device provides 32 I/O pins, one Z86E4312 can replace several discrete logic ICs and a separate driver array in a compact enclosure. When laying out the board, route the 44-LCC pads on a compatible PLCC footprint, provide decoupling close to the supply pins, and keep the OTP programming interface accessible until the code is finalized. Also note that OTP parts are ordered against a fixed firmware image, so schedule programming and mask ordering early in the development cycle. This page consolidates the device characteristics, package and mounting details, drop-in replacement options within the same 44-LCC footprint, and practical design guidance so that a design team can decide quickly whether the Z86E4312VSG fits the control task and how to qualify an alternative if sourcing needs change.

RFQ Contact
Z86E4412ASG - 8-Bit 12MHz 16KB OTP MCU | Zilog
Z86E4412ASG

Z86E4412ASG - 8-Bit 12MHz 16KB OTP MCU | Zilog

The Zilog Z86E4412ASG is an 8-bit Z8 microcontroller operating at 12 MHz with 16 KB of one-time-programmable memory in a 44-pin LQFP package measuring 10 mm by 10 mm. Its operating supply range is 3.5 V to 5.5 V, making it suitable for embedded controls that require a compact, nonvolatile program-memory architecture. A microcontroller is an integrated circuit that combines a processor core, program memory, data memory, and peripheral functions into one device. Within the product hierarchy, the Z86E4412ASG is a microcontroller IC, a member of the Z8 family, and a general-purpose embedded controller. It executes firmware stored in OTP memory and can be used to monitor inputs, control outputs, and coordinate system behavior without external program-memory devices. The principal specifications are a maximum clock frequency of 12 MHz, 16 KB of OTP program memory organized as 16K by 8 bits, a 3.5 V to 5.5 V supply range, and a 44-pin LQFP package. The product listing also identifies 236 bytes of additional memory and a 32-pin count associated with the device interface. These characteristics position the part for compact embedded designs where moderate processing speed and one-time field programming are more important than large flash-memory capacity. The Z86E4412ASG belongs to the Zilog Z8 family of 8-bit controllers. One-time-programmable memory allows firmware to be fixed during manufacturing or deployment, providing a stable control implementation that cannot be rewritten through the normal programming interface. The 10 mm by 10 mm LQFP footprint also exposes a substantial number of external connections compared with smaller surface-mount packages, supporting a broader selection of peripherals and mixed-signal interfaces. Typical applications include appliance control, industrial sequence controllers, motor and relay interfaces, metering equipment, and compact embedded systems with human-machine interfaces. A 12 MHz clock provides sufficient execution bandwidth for supervisory control loops, while the 3.5 V to 5.5 V range supports common industrial and embedded supply systems. Before circuit implementation, confirm the complete pin assignments, peripheral availability, electrical limits, and programming procedure in the Zilog datasheet. The 44-pin package requires careful decoupling, adequate ground connectivity, and signal-routing discipline to prevent switching noise or supply transients from affecting embedded control behavior. This page organizes the verified device identity, package characteristics, sourcing information, application guidance, and design checks needed to evaluate the Z86E4412ASG. It also distinguishes documented facts from parameters that should be confirmed from the manufacturer documentation before schematic release or PCB layout approval.

RFQ Contact
Z86E4412FSC - 8-Bit 12MHz Z8 Microcontroller | Zilog
Z86E4412FSC

Z86E4412FSC - 8-Bit 12MHz Z8 Microcontroller | Zilog

The Zilog Z86E4412FSC is an 8-bit Z8 microcontroller operating at up to 12 MHz with 16 KB of one-time-programmable memory in the FSC package configuration. It belongs to Zilog’s Z86E4412 microcontroller family and is intended for embedded control applications that require deterministic peripheral control, compact embedded logic, and programmable nonvolatile code storage. The FSC ordering code identifies the lead-free component variant associated with the Z86E4412 family. A microcontroller is a semiconductor device that integrates a processor core, memory, and peripheral interfaces onto one integrated circuit. Within the product hierarchy, the Z86E4412FSC is an 8-bit microcontroller, an embedded processor, a programmable controller, and a member of the broader semiconductor category. Its one-time-programmable memory is intended for applications where firmware is written during manufacturing or deployment and does not need subsequent field reprogramming. The principal published characteristics include an 8-bit processing architecture, a 12 MHz maximum operating frequency, and 16 KB of OTP program memory. These figures position the device for compact control tasks such as appliance logic, industrial modules, interface controllers, and dedicated embedded subsystems. The one-time-programmable architecture can also help prevent unauthorized firmware changes after production, although field updates require a different programmable-memory strategy. The Z8 architecture combines the processor core with integrated peripherals intended to reduce external component count in embedded designs. At 12 MHz, the device provides a defined execution-rate ceiling for control-loop timing, serial-interface handling, and state-machine operation. Because the clock rating is stated as a maximum frequency rather than a guaranteed performance across every peripheral condition, designers should review the manufacturer datasheet for oscillator, reset, timing, and electrical limits before fixing system timing margins. Typical uses include low-cost embedded controllers, sensor-conditioning systems, motor or actuator control, simple serial bridges, and compact household or industrial modules. One-time-programmable memory is particularly appropriate for high-volume products whose firmware is fixed during manufacturing, such as dedicated appliance controllers and fixed-function industrial interfaces. The device can also serve as a logic-management hub when a system needs more control capability than discrete logic but less processing complexity than a general-purpose application processor. PCB planning should prioritize the exact package drawing, exposed connections, pin multiplexing, and recommended decoupling layout. The Z86E4412FSC requires the correct oscillator, reset, power, programming, and decoupling arrangements to operate reliably. Verify the complete pin description table and application circuit in the manufacturer datasheet before assigning every package terminal or routing high-speed signals. This page combines the verified 8-bit architecture, 12 MHz operating frequency, and 16 KB OTP memory rating with practical sourcing guidance, same-family replacement analysis, and engineering-focused application notes. It is intended to help engineers identify fit, assess programming constraints, plan layouts, and compare candidate devices without overlooking the distinctions between MCU architectures and package variants.

RFQ Contact