Products (21,000+)

Z86C9116PEC - 8-Bit 16MHz ROMless Z8 MCU | Zilog
Z86C9116PEC

Z86C9116PEC - 8-Bit 16MHz ROMless Z8 MCU | Zilog

The Zilog Z86C9116PEC is an 8-bit Z8 ROMless microcontroller operating at 16 MHz in a 40-pin PDIP package. It is designed for embedded control applications requiring a compact Z8-compatible CPU, external program memory, and through-hole PCB assembly. The device uses CMOS technology and an 8-bit data bus, providing a straightforward upgrade path within the Z86C91 microcontroller family. A ROMless microcontroller is an integrated circuit that contains the processor core and peripheral functions but retrieves its program from external memory. This differs from a mask-programmable or flash-memory MCU because application code remains in external storage, allowing the firmware to be updated without replacing the controller. The Z86C9116PEC occupies the ROMless, Z8, 8-bit, 16 MHz portion of the Zilog embedded-controller portfolio. Key characteristics include a 16 MHz operating frequency, an 8-bit CPU architecture, external-program-memory operation, and a 40-pin PDIP package with a 0.620-inch body width and 15.75 mm length. The through-hole package supports conventional PCB assembly and is useful in control boards that require manual insertion, prototyping, or socketed serviceability. Its 8-bit data bus and 16 MHz clock place it in the traditional embedded-control class rather than the high-speed 16- or 32-bit application-processor class. The Z8 architecture is designed around a compact instruction set and dedicated peripheral resources, allowing engineers to implement control loops, interface protocols, and timing functions with relatively modest external circuitry. Because the controller is ROMless, external address and data buses connect the processor to program storage. Board-level design therefore requires careful routing of address, data, and control signals to preserve signal integrity at the operating clock. Typical uses include industrial machine controls, appliance controllers, instrumentation modules, motor-control support logic, and legacy peripheral-control boards. The 40-pin PDIP package also makes the device suitable for educational and prototype platforms where through-hole components are easier to assemble and rework. It is less suitable for new space-constrained products because surface-mount packages normally reduce board area and improve automated assembly throughput. When laying out a board for the Z86C9116PEC, place external program-memory devices and any bus transceivers close to the controller, route clock and address signals away from high-current switching nodes, and decouple each supply rail near the device. Confirm the memory map, address multiplexing, and external bus timing against the manufacturer datasheet before releasing the PCB. This page combines device specifications, package details, verified listing links, and practical design guidance for engineers planning a Z86C91-based control board.

RFQ Contact
Z86C9116PEG - 8-Bit 16MHz ROMless MCU | Zilog
Z86C9116PEG

Z86C9116PEG - 8-Bit 16MHz ROMless MCU | Zilog

Zilog Z86C9116PEG is an 8-bit Z8 ROMless microcontroller operating at 16 MHz with a 4.5 V to 5.5 V supply range, 32 I/O ports, and a 40-pin CDIP package. It is designed for embedded control systems requiring a compact 8-bit processor, dedicated I/O capacity, and external program memory. A ROMless microcontroller is a microprocessor that contains no embedded program memory. The Z86C9116PEG therefore requires an external memory device for firmware storage, while its internal architecture supplies the central processing unit, I/O control, timers, interrupts, and communication peripherals. Within the semiconductor hierarchy, it belongs to the microprocessor and microcontroller family, specifically the Zilog Z8 product line. The principal operating characteristics are a 16 MHz clock, an 8-bit data bus, 32 I/O ports, and a 4.5 V to 5.5 V operating supply. Its industrial operating range makes it appropriate for factory equipment, instrumentation, access-control systems, and embedded controllers that require deterministic peripheral control. The 40-pin CDIP package also supports traditional through-hole assembly and prototyping workflows. The ROMless architecture separates firmware storage from the controller, allowing application code size to scale with an external memory component. This can be useful in designs that need multiple firmware variants, field-programmable logic, or a shared memory interface. The trade-off is that the board must provide an external memory device and associated address and data connections, increasing component count and PCB complexity relative to a ROM-based microcontroller. Typical applications include industrial keypad scanners, programmable timers, motor-control interfaces, serial protocol bridges, test fixtures, and compact control panels. The Z86C9116PEG is especially appropriate when a design needs more I/O than a small surface-mount controller offers but does not require the processing power or memory capacity of a 16- or 32-bit MCU. Before layout, confirm the external-memory interface requirements, reset behavior, oscillator arrangement, and available I/O functions in the Zilog Z86C9116 datasheet. Use the manufacturer pin-description table when assigning tracks because the 40-pin CDIP footprint includes both power, ground, clock, reset, I/O, and external-memory signals. This page combines core Z86C9116PEG specifications, verified sourcing information, compatible alternatives, and practical selection guidance to help engineers evaluate the controller for legacy and new embedded-control designs.

RFQ Contact
Z86C9116PSC - 16MHz ROMless 8-Bit Z8 MCU | Zilog
Z86C9116PSC

Z86C9116PSC - 16MHz ROMless 8-Bit Z8 MCU | Zilog

The Zilog Z86C9116PSC is a ROMless 8-bit Z8 microcontroller operating at up to 16 MHz and packaged in a 40-pin PDIP through-hole package. Its key characteristics are a Z8 CPU core, 16 MHz maximum operating frequency, ROMless program-memory architecture, and CMOS implementation. The MCU is designed for embedded control systems requiring an external program-memory device and conventional through-hole PCB assembly. An 8-bit microcontroller is a compact embedded-control processor used to read inputs, execute control logic, and drive outputs in products such as industrial controllers, instruments, appliances, and communication equipment. The Z8 family combines a processor core with on-chip peripherals and bus interfaces, while a ROMless architecture moves firmware into external memory. This creates a microcontroller, embedded processor, and programmable logic device within the wider semiconductor hierarchy. The 16 MHz clock rate gives the Z86C9116PSC greater processing headroom than 8 MHz Z8 devices while retaining an 8-bit instruction architecture. Its ROMless configuration permits program-memory capacities and interfaces determined by the external memory device rather than a fixed internal program ROM. CMOS operation supports low-voltage digital systems, and the PDIP-40 package facilitates prototype insertion, inspection, and through-hole PCB assembly. The part belongs to the Zilog Z86C91 family and uses the Z8 CPU core. Its 40-pin package exposes the device's address, data, control, port, reset, clock, and power connections. Because external program memory is required, the system designer must select a compatible memory device and define the electrical and address-bus connections before laying out the PCB. Operating voltage limits, memory-interface timing, I/O ratings, and detailed peripheral assignments should be confirmed against the manufacturer datasheet. Typical applications include industrial panel controllers, instrumentation, keypad interfaces, motor and relay-control boards, data-acquisition modules, and legacy control systems. The 40-pin PDIP format is particularly useful where manual servicing, socketed assembly, or through-hole compatibility has priority over board area. It is less suitable for highly compact products where a surface-mount package would reduce board size and manufacturing complexity. Design should reserve a stable clock source, adequate bypass capacitance, and clean power distribution around the 40-pin device. The external program-memory bus must be routed according to the device's timing and loading requirements, while unused inputs should be connected to defined logic levels. Review the pin-description table and recommended application circuit in the Zilog datasheet before finalizing the schematic and footprint. This page combines the verified product identity, package and architecture details, price-sourcing guidance, same-family drop-in options, comparison parameters, and practical PCB guidance. It is intended to help engineers identify the correct MCU, verify compatibility, and plan an accurate Z86C9116PSC implementation.

RFQ Contact
Z86C9116PSG - 16MHz 8-Bit ROMless MCU | Zilog
Z86C9116PSG

Z86C9116PSG - 16MHz 8-Bit ROMless MCU | Zilog

Zilog Z86C9116PSG is an 8-bit Z8 ROMless microcontroller operating at 16 MHz with a 4.5 V to 5.5 V supply range, 236 bytes of RAM, 32 I/O ports, and a 40-pin PDIP package. It belongs to the Z86C91 product family and requires an external program-memory device because no internal ROM is provided. An 8-bit ROMless microcontroller is a compact embedded-control processor designed for systems that require deterministic I/O handling rather than application storage inside the MCU. In the product hierarchy, the Z86C9116PSG is a microcontroller, an embedded processor, and a semiconductor integrated circuit. Its ROMless architecture separates program memory from the controller, allowing designers to select external storage according to firmware size and interface requirements. The headline features include a 16 MHz operating clock, an 8-bit data bus, 236 bytes of on-chip RAM, and 32 I/O ports. The 4.5 V to 5.5 V supply range supports conventional 5 V industrial embedded systems. Because the MCU is ROMless, an external program-memory device is required, while the 236 bytes of internal RAM provide limited working memory for variables, stack operations, and control-state management. The Z86C9116PSG uses the Z8 architecture and is positioned as a compact, low-cost controller for embedded products requiring parallel digital I/O. Its 40-pin PDIP package provides a comparatively large number of external connections compared with smaller surface-mount MCUs, making it practical for prototyping, through-hole industrial assemblies, and applications that need direct access to peripheral pins. Typical uses include appliance controllers, industrial sequencers, keyboard or panel interfaces, lighting-control modules, instrumentation, and small embedded automation systems. The 32 I/O ports are particularly useful when a design must connect multiple switches, indicators, sensors, or actuators without relying on additional interface expanders. When designing around this device, engineers must account for the absence of internal program memory and provide a suitable external memory implementation. The available verified data does not specify the external-memory interface, exact pin assignments, peripheral mix, or detailed timing characteristics, so those items should be confirmed in the manufacturer datasheet before schematic capture. This product page consolidates distributor availability, verified pricing, device hierarchy, package information, and same-brand replacement analysis. It also distinguishes directly documented drop-in candidates from alternatives that cannot be verified as pin-to-pin compatible, helping engineers avoid replacing an MCU solely because the clock speed and package description look similar.

RFQ Contact
Z86C9116VEC - 16MHz ROMless 8-Bit MCU | Zilog | 44-Pin LCC
Z86C9116VEC

Z86C9116VEC - 16MHz ROMless 8-Bit MCU | Zilog | 44-Pin LCC

The Zilog Z86C9116VEC is a ROMless 8-bit Z8 microcontroller operating at 16 MHz, with a 4.5 V to 5.5 V supply range and 32 I/O ports in a 44-pin J-lead LCC package. Designed for embedded control applications that require external program and data memory, the device provides an 8-bit data bus and an industrial operating grade. A ROMless microcontroller is a type of embedded processor that contains no embedded program memory. Instead, external memory stores the executable firmware, allowing application capacity to scale independently of the controller. In system terminology, the Z86C9116VEC belongs to the embedded MCU family and sits within the broader category of programmable microcontrollers and semiconductors. Key characteristics include a 16 MHz clock, 8-bit parallel architecture, 32 I/O ports, and operation from 4.5 V to 5.5 V. The absence of internal ROM makes the device suitable for applications in which firmware is loaded from external nonvolatile memory or programmed during a manufacturing and test flow. Its 44-pin LCC package also supports compact, surface-mount assemblies where a plastic-leaded chip carrier is acceptable. The Z8 architecture combines an 8-bit central processing unit with dedicated peripheral functions and an external-memory interface. Because the program store is external, the board must provide suitable memory logic, address decoding, and bus timing. Component selection should account for the external device access time and the timing margin available at the selected operating frequency. Typical uses include industrial controllers, peripheral controllers, embedded instruments, keypad interfaces, and compact automation modules. The 32 available I/O ports allow the device to supervise switches, indicators, sensors, and actuators while an external memory device retains firmware and data. When laying out the PCB, treat external program-memory routing as a signal-integrity task. Keep the processor-to-memory address and data traces short, provide a solid ground reference, and place bypass capacitors close to the supply pins. Confirm the external memory interface and all package-level assignments against the current Zilog datasheet before fabrication. This page combines the key electrical specifications, package details, sourcing guidance, drop-in alternatives, and design notes needed to evaluate the Z86C9116VEC during component selection and PCB planning.

RFQ Contact
Z86C9116VEG - 16MHz ROMless 8-Bit MCU | Zilog
Z86C9116VEG

Z86C9116VEG - 16MHz ROMless 8-Bit MCU | Zilog

The Zilog Z86C9116VEG is an 8-bit ROMless CMOS microcontroller operating at 16 MHz with a 4.5 V to 5.5 V supply range. It provides an 8-bit data bus, 32 I/O ports, and an industrial operating range. The part is identified as a DIP-40 device in the technical listing, making it suitable for designs that require a through-hole controller with external program memory. As a ROMless microcontroller, the Z86C9116VEG requires an external program-memory device connected through its address and data buses. This architecture separates code storage from the controller and allows the program size to be selected during system design. The 16 MHz operating speed provides a practical balance between processing throughput, power consumption, and external-memory access time for cost-sensitive embedded control systems. The listed electrical characteristics include a 4.5 V minimum operating supply and a 5.5 V maximum operating supply. An 8-bit external data bus supports connection to external program memory, while the 32 available I/O ports provide dedicated digital interfaces for sensors, switches, indicators, relays, and peripheral control signals. The device operates in the industrial temperature range, supporting industrial control and instrumentation environments. Because the device is ROMless, the complete memory system depends on the external memory interface, address decoding, and firmware initialization sequence. Board designers should confirm the external bus timing and address map against the manufacturer datasheet before layout release. Decoupling, grounding, and unused-pin treatment are equally important for reliable operation in a through-hole industrial design. Typical uses include industrial controllers, data-acquisition modules, keypad interfaces, motor-control sequencers, appliance controllers, and embedded instrumentation. The DIP-40 format also supports prototyping and legacy system maintenance where socketed parts and hand-wiring are common. This page combines lifecycle information, verified distributor listings, pin-package details, application guidance, and engineering notes to support component selection and board-level planning for the Z86C9116VEG.

RFQ Contact
Z86C9116VSC - 8-Bit 16MHz ROMless MCU | Zilog
Z86C9116VSC

Z86C9116VSC - 8-Bit 16MHz ROMless MCU | Zilog

The Zilog Z86C9116VSC is an 8-bit Z8 ROMless microcontroller operating at 16 MHz, with 236 x 8-bit RAM, 24 I/O pins, one UART/USART interface, and a 44-pin PLCC surface-mount package. It is intended for embedded control and serial-communication designs that require external program memory and a compact leaded surface-mount footprint. A ROMless microcontroller is a semiconductor that executes application code from external memory instead of storing its program in an internal ROM. Within the embedded-control hierarchy, the Z86C9116VSC belongs to the 8-bit microcontroller class, where deterministic instruction execution and a broad peripheral set can provide an economical alternative to more complex 16- or 32-bit processors. Its Z8 architecture combines the processor core with embedded control peripherals in one integrated circuit. The principal device characteristics are a 16 MHz maximum clock frequency, 236 bytes of internal data RAM, and 24 general-purpose I/O pins. Because the MCU is ROMless, the system designer must connect external program memory and also confirm the required address, data, and control signals in the application schematic. The integrated UART/USART supports serial communication, while the internal oscillator reduces the number of external clock components normally needed for basic controller designs. The Z86C9116VSC is assembled in a 44-terminal PLCC package designated QCCJ. Its square package body and J-bend leads are intended for surface mounting, allowing the device to be placed on a PCB without through-hole insertion. The commercial temperature designation identifies its intended operating class, while the VSG, VEC, VEG, and AEG family variants provide different temperature or grade options for design portfolios that require controlled PCB migration. Typical applications include industrial control panels, serial interface adapters, keypad and display controllers, instrumentation, appliance controllers, and embedded communications modules. The 24 available I/O lines support discrete sensors, switches, indicators, and peripheral control, while the UART/USART provides a practical path to a host processor, display, modem, or service interface. PCB design should begin with the manufacturer pin-description and memory-interface tables. Because the device has no internal program ROM, external memory address width, chip-select behavior, read timing, and write-control requirements must be resolved before layout. Place decoupling and clock-support components according to the circuit guidelines in the manufacturer documentation, and preserve the PLCC land pattern when comparing temperature-grade replacements. This page combines the confirmed Z86C9116VSC device characteristics, same-footprint Z8 alternatives, parameter comparisons, and practical migration guidance. It also separates commercial sourcing questions from engineering selection so engineers can identify a qualified replacement and request current availability through the XAIPART Request a Quote form.

RFQ Contact
Z86C9116VSG - 16MHz 8-Bit ROMless MCU | Zilog
Z86C9116VSG

Z86C9116VSG - 16MHz 8-Bit ROMless MCU | Zilog

The Zilog Z86C9116VSG is an 8-bit Z8 ROMless microcontroller with a 16 MHz clock speed, 32 I/O ports, and a 44-pin PLCC package. Its 4.5 V to 5.5 V supply-voltage range supports industrial control systems that use a conventional 5 V power rail. The ROMless architecture requires an external program-memory device, while the integrated 32-port I/O capability reduces the number of companion interface ICs needed in small embedded systems. An 8-bit microcontroller is a compact processor designed around a byte-oriented architecture, embedded control peripherals, and direct digital input/output. The Z8 family sits within the broader hierarchy of microcontrollers, embedded processors, and semiconductor components. Compared with a general-purpose processor, this device focuses on deterministic control tasks, communication peripherals, timers, and externally accessed program and data memory rather than operating-system performance or high-bandwidth computation. Principal features include ROMless operation, an 8-bit data bus, a 16 MHz maximum clock, and 32 I/O ports. The 44-pin PLCC package provides enough connections for external memory interfaces, parallel I/O, control signals, and clock or reset support. Because the device has no internal program memory, system access must include suitable external memory and address, data, and control wiring. The 4.5 V minimum supply voltage also leaves less headroom for low-voltage operation than 3.3 V-oriented microcontrollers. The Z86C9116VSG belongs to the Zilog Z86C91 family and uses the Z8 architecture. Its ROMless design provides flexibility for applications that require firmware upgrades, field-configurable control logic, or program storage in a separate nonvolatile device. At the same time, external memory introduces address-decoding and bus-timing requirements that must be considered during schematic design and PCB layout. The 16 MHz operating speed provides sufficient instruction throughput for typical embedded sequencing, data acquisition, keypad, display, actuator, and industrial automation tasks. Typical uses include programmable logic controllers, industrial controllers, instrumentation panels, keyboard scanners, LED or display sequence controllers, data-acquisition systems, and compact embedded automation equipment. The 32 I/O ports are especially useful for machines requiring numerous digital inputs and outputs, while external program memory allows application firmware to be sized independently of the microcontroller package. A critical design consideration is the ROMless implementation. Route the external memory bus cleanly, preserve the timing margin required by the Z8 bus interface, and include the required clock and reset components. Keep sensitive analog or communication circuitry away from high-current memory outputs, and validate signal integrity across all board lengths and temperature conditions. This page consolidates the key electrical ratings, package identity, sourcing considerations, and drop-in comparison candidates for the Z86C9116VSG. It also highlights the practical trade-offs involved in retaining the Z8 platform, especially external-memory requirements, package availability, and the difference between a true pin-compatible replacement and a merely similar controller.

RFQ Contact
Z86C9320ASG - 8-Bit 20MHz ROMless MCU | Zilog
Z86C9320ASG

Z86C9320ASG - 8-Bit 20MHz ROMless MCU | Zilog

The Zilog Z86C9320ASG is an 8-bit Z8 ROMless microcontroller rated for operation up to 20 MHz and supplied in a 44-LQFP package measuring 10 mm by 10 mm. It belongs to the Z86C93 controller family and includes a hardware multiplier, a divider, and three 16-bit counter timers for embedded-control workloads that require more arithmetic capability than a basic 8-bit core. An 8-bit microcontroller is a compact embedded-processing component intended to execute firmware, read inputs, control outputs, and manage communication or timing functions in a larger electronic system. Within the embedded hierarchy, this device belongs to the microcontrollers category and uses the Z8 architecture. Because Z86C9320ASG is ROMless, its program memory must be supplied externally rather than being integrated into the device. The Z86C9320ASG combines a 20 MHz maximum clock with a hardwired 16-bit-by-16-bit multiplier, a 32-bit-by-16-bit divider, and three 16-bit counter timers. The multiplier supports efficient arithmetic in motor-control, measurement, and signal-processing routines, while the divider supports frequency and scaling calculations. These dedicated hardware resources reduce the execution burden placed on the 8-bit processor during time-sensitive control operations. The device also provides a capture register and a fast decrement mode, expanding the available event-timing options for industrial controls, counters, and timing-sensitive embedded products. The 44-LQFP package exposes 44 external connections and supports conventional surface-mount PCB assembly. Its 10 mm by 10 mm body is larger than the smallest microcontroller packages but provides a practical pin count for peripheral connections and multi-signal interfaces. Typical design roles include industrial control, digital instrumentation, motor and stepper-control systems, timing modules, and compact embedded controllers. Its dedicated arithmetic and timer resources are particularly useful when the firmware must multiply measurements, divide frequencies, count external events, or coordinate multiple timing sequences without relying entirely on software loops. For a new design, confirm oscillator, reset, clock, programming, interrupt, and I/O assignments against the manufacturer pin description before laying out the PCB. Because this is a ROMless microcontroller, the external memory interface, associated address and data routing, and programming arrangement can materially affect both routing complexity and board-space requirements. This product page combines the manufacturer-family characteristics, package information, source pricing context, cross-reference findings, and practical design considerations needed to evaluate the Z86C9320ASG. It also distinguishes verified drop-in replacements from functionally related 8-bit controllers that require separate pin, clock, memory, and peripheral validation.

RFQ Contact
Z86C9320FSC 8-Bit 20MHz ROMless MCU 44-LQFP | Zilog
Z86C9320FSC

Z86C9320FSC 8-Bit 20MHz ROMless MCU 44-LQFP | Zilog

The Zilog Z86C9320FSC is an 8-bit Z8 ROMless microcontroller operating at up to 20 MHz in a 44-LQFP package measuring 10 x 10 mm. It provides 236 KB of RAM, 24 I/O pins, three 8-bit timers, and a UART communication interface. Z86C9320FSC is intended for embedded control designs where external program memory is required and a compact, high-pin-count surface-mount implementation is preferred. An 8-bit microcontroller is a programmable semiconductor device designed to execute embedded control logic using an 8-bit data path. The Z86C9320FSC belongs to the Z8 family of Zilog microcontrollers and is a ROMless device, meaning the application program is stored in external memory rather than embedded program ROM. This architecture separates the controller from the program memory, allowing the memory device to be selected according to application capacity, interface, and cost requirements. The principal verified specifications are a maximum operating speed of 20 MHz, 236 KB of RAM, 24 I/O, three 8-bit timers, one UART interface, and a 44-LQFP package. The package provides 44 terminals for power, clock, reset, communications, timers, interrupts, general-purpose I/O, and external-memory connections. The reported speed options include 20 MHz, 25 MHz, and 33 MHz, while the distributor listing identifies the Z86C9320FSC specifically as a 20 MHz ROMless device. The ROMless architecture is useful for applications that need larger or field-updatable firmware than a fixed-program microcontroller normally provides. External program-memory selection must account for bus timing, address capacity, signal integrity, and the controller's documented external-memory interface. The Z86C9320FSC should therefore be evaluated as a system component rather than only as a standalone MCU. Typical application areas include industrial control panels, serial-control equipment, building automation modules, data-acquisition controllers, motor-control interfaces, and embedded communication products. A UART provides a practical path for host configuration, sensor networking, or supervisory control, while the three timers support periodic timing, input capture, or basic output-control functions depending on the complete peripheral configuration. A critical design consideration is firmware availability: because this device is ROMless, the PCB must include an appropriate external memory solution and correct bus support components. Engineers should verify the complete Zilog documentation for electrical limits, pin assignments, memory-interface timing, clock requirements, and programming procedure before releasing a production layout. This page consolidates verified distributor specifications, package information, sourcing details, and engineering-oriented application guidance. It also distinguishes documented facts from parameters that require confirmation from the manufacturer datasheet, helping designers compare the Z86C9320FSC efficiently without assuming unavailable electrical details.

RFQ Contact
Z86C9320VSC - 8-Bit 20MHz ROMless MCU | Zilog
Z86C9320VSC

Z86C9320VSC - 8-Bit 20MHz ROMless MCU | Zilog

The Zilog Z86C9320VSC is an 8-bit Z8 ROMless microcontroller operating at 20 MHz and packaged in a 44-pin PLCC. Its ROMless architecture requires an external program-memory source, making it suitable for systems that need flexible firmware storage, field programming, or program separation from the controller. The device belongs to the Z86C93 microcontroller family and targets embedded control, communications, and industrial applications requiring deterministic 8-bit processing. A microcontroller is a complete embedded-control component that integrates a processor core, memory interfaces, timers, serial peripherals, and I/O resources onto one semiconductor device. The Z86C9320VSC sits in the hierarchy of embedded controller, microcontroller, 8-bit MCU, and Z8 ROMless controller. Unlike a ROM-based MCU with fixed internal program memory, this architecture delegates program storage to external memory, allowing the same controller family to serve products with different firmware and memory-capacity requirements. The principal documented characteristics include an 8-bit CPU, a 20 MHz operating frequency, ROMless configuration, and a 44-pin PLCC package. Its 20 MHz clock capability provides substantially more instruction throughput than lower-speed 8-bit controllers, making it useful for interrupt-driven control, serial protocols, keypad or display interfaces, and communication front ends. The external-memory architecture is especially valuable when firmware size, updateability, or protection requirements exceed practical internal-ROM limits. The Z86C9320VSC belongs to Zilog's Z86C93 family and is identified in the product listings as the C93 device. Its architecture supports the role of a dedicated embedded controller rather than a general-purpose host processor. Board-level implementation therefore requires careful routing of the external memory interface and correct decoupling of the supply rails. Firmware development also depends on a toolchain and programmer compatible with the Z8 family, so software-tool availability should be confirmed before committing to a new design. Typical uses include industrial control panels, data-acquisition modules, serial protocol bridges, programmable logic controllers, and embedded communications equipment. The device is particularly appropriate where an 8-bit architecture simplifies code and peripheral handling while external program memory permits application-specific code storage. It can also be used in legacy Z8 control systems where retaining the established 44-pin PLCC footprint simplifies maintenance and board reuse. For new layouts, place the controller and supporting external-memory devices according to the manufacturer's pin and layout guidance, and keep high-current and switching circuitry away from sensitive signal paths. Confirm the exact programming algorithm, clock configuration, reset requirements, and external-memory interface in the manufacturer datasheet before schematic release. Production designs should also verify temperature grade, package marking, sourcing status, and programming-tool support with the manufacturer. This page consolidates the core Z86C9320VSC identity, package and frequency details, replacement considerations, and practical design guidance. It also distinguishes confirmed device attributes from electrical details that require direct review of the manufacturer datasheet, helping engineers make a technically sound sourcing and design decision.

RFQ Contact
Z86C9320VSG - 8-Bit 20MHz ROMless MCU | Zilog
Z86C9320VSG

Z86C9320VSG - 8-Bit 20MHz ROMless MCU | Zilog

The Zilog Z86C9320VSG is an 8-bit Z8 Z8 C93-series ROMless microcontroller operating at up to 20 MHz, with 236 bytes of RAM and multiply/divide capability in a 44-pin PLCC package. It is designed for embedded control systems requiring a compact processor, parallel and serial control peripherals, and externally supplied program memory. A ROMless microcontroller is a semiconductor that contains a processor core and peripheral hardware but omits embedded program memory. Zilog's Z8 family sits within the broader 8-bit microcontroller hierarchy, where the CPU core, timers, serial interfaces, interrupt controller, and external memory interface provide a compact alternative to a general-purpose processor. Z86C9320VSG is identified as a C93-series device, making it appropriate for legacy Z8 control architectures and designs requiring external program-memory organization. The headline characteristics are an 8-bit CPU, a 20 MHz maximum clock, 236 bytes of RAM, ROMless operation, multiply/divide arithmetic, and a 44-pin PLCC package. Its external-memory architecture allows the final firmware capacity to be established with suitable memory devices rather than a fixed internal ROM. The 44-pin PLCC also provides a substantial pin count for interfacing external program memory and the peripheral signals needed by embedded industrial equipment. Z86C9320VSG belongs to the Zilog Z86C93 device family. The ROMless configuration is useful when application firmware must remain in external nonvolatile memory, when production code revisions need a flexible memory strategy, or when a board family must share one processor and support several memory sizes. The processor's 20 MHz operating rate supports deterministic control logic, while the multiply/divide function is useful for scaling, compensation, and basic arithmetic tasks that would otherwise require software routines. Typical applications include industrial controllers, legacy peripheral-control boards, motor and mechanism controllers, instrumentation interfaces, and embedded systems that already use the Z8 C93 architecture. In these systems, external program memory can hold firmware while the microcontroller manages timing, communications, and I/O. The PLCC package is also appropriate for leaded, socket-compatible industrial hardware and prototypes where field replacement or component-level servicing may be important. Designers should verify the external memory interface, interrupt requirements, peripheral assignments, and pin multiplexing in the Zilog device documentation before layout release. Because the MCU is ROMless, the complete system must include suitable external program memory and the associated address, data, and control routing. A practical advantage is the flexible firmware-memory sizing, while the main trade-off is the additional board area and component count compared with a ROM-based microcontroller. This page consolidates the verified Z86C9320VSG device identity, package information, sourcing context, replacement analysis, and engineering guidance into a design-oriented reference. It also distinguishes verified drop-in interchangeability from unreferenced similarity so engineers can assess PCB reuse and migration risk with greater clarity.

RFQ Contact
Z86C9325ASC - 25MHz 8-Bit ROMless MCU | Zilog
Z86C9325ASC

Z86C9325ASC - 25MHz 8-Bit ROMless MCU | Zilog

Zilog Z86C9325ASC is a 25 MHz, 8-bit, ROMless Z8 microcontroller supplied in a 48-pin LQFP package measuring 7 mm by 7 mm. It operates from a 3 V to 5.5 V supply and provides the classic Z86C93 function set as a compact embedded controller for cost-sensitive, low-power systems. A ROMless 8-bit microcontroller is an embedded processing IC designed around an 8-bit CPU architecture and external program memory. Unlike a ROM-equipped variant, it allows firmware to remain in external nonvolatile memory, giving designers flexibility to update application code, share memory across products, or support multiple firmware configurations without changing the controller. The Z86C9325ASC operates at 25 MHz, enabling the processor to execute control loops, scan input devices, update displays, and manage communication peripherals efficiently. Its 3 V to 5.5 V operating range supports both 3.3 V and 5 V system architectures. Listings identify the device as ROMless and associate the Z8 family with multiply and divide capabilities, making it suitable for motor, display, appliance, and industrial-control functions that require more arithmetic performance than a basic 8-bit controller. The 48-pin LQFP-48 (7x7 mm) package provides the external interface required for a ROMless design. Because program storage is external, the complete PCB design must account for the associated address, data, and control paths. Component density is higher than that of smaller 8-bit packages, but the 7 mm by 7 mm footprint remains practical for industrial controllers, instrument panels, embedded control modules, and compact automation equipment. Typical uses include keypad-driven control panels, stepper-motor indexers, timer and counter modules, sensor acquisition controllers, and communication front ends. At 25 MHz, the device can service time-sensitive input/output tasks while leaving computational headroom for protocol handling and application logic. External memory access timing and bus loading should be evaluated against the required clock and program size. PCB planning should preserve the LQFP-48 footprint, provide a stable 3 V to 5.5 V supply, decouple the power rails close to the device, and route external-memory signals according to the manufacturer pin description. Because this ROMless configuration depends on external program memory, budget its cost, interface complexity, and update requirements together with the MCU. This product page combines the Z86C9325ASC package and operating specifications with sourcing guidance, family alternatives, comparison parameters, and practical design considerations. It provides engineering context beyond a basic distributor listing while keeping every unconfirmed electrical or pin-level value clearly identified for datasheet review.

RFQ Contact
Z86C9325ASG - 8-Bit 25 MHz ROMless MCU | Zilog
Z86C9325ASG

Z86C9325ASG - 8-Bit 25 MHz ROMless MCU | Zilog

Zilog Z86C9325ASG is an 8-bit CMOS ROMless Z8 microcontroller operating at 25 MHz, supplied in a 48-pin LQFP package measuring 7 x 7 mm. It operates from a 3 V to 5.5 V supply and is designed for embedded control systems that require deterministic timer, arithmetic, and input/output performance in a compact surface-mount package. A microcontroller is a programmable system-on-chip that integrates a processor core, memory interface, timers, serial interfaces, and digital I/O into one device. The Z8 family belongs to the broader embedded-controller hierarchy: ROMless microcontrollers are programmed externally, allowing the same silicon to be used with different program memories or configurations. This makes them useful when a product requires field customization, external nonvolatile program storage, or a memory arrangement not addressed by the MCU's own program memory. The Z86C93 family includes a hardwired 16-bit by 16-bit multiplier, a 32-bit by 16-bit divider, and three 16-bit counter timers. A capture register and fast decrement mode improve measurement and event-handling flexibility. These arithmetic and timing resources are valuable for motor control, industrial counting, signal timing, and compact embedded controllers that must perform calculations without relying on a more complex processor architecture. The 25 MHz operating rate provides more execution headroom than slower members of the Z86C93 family while retaining an 8-bit instruction-oriented architecture. Program storage is external because the device is ROMless, so designers must select the appropriate memory interface, programmer, and code-development workflow. Firmware determines the final peripheral configuration and application behavior, meaning successful implementation depends on matching the external program-memory device and bus timing to the controller requirements. Typical applications include industrial timers, counter modules, keypad and display controllers, appliance controls, small motor-control boards, and embedded OEM products requiring compact 8-bit control. The 48-pin LQFP package exposes more I/O than smaller packages and supports prototype and production assembly using standard surface-mount processes. It is particularly appropriate where three timers and dedicated arithmetic hardware simplify control tasks that would otherwise require additional discrete logic. For layout and firmware work, begin with the manufacturer pin-description table and the Z86C93 hardware design guidance. Confirm external program-memory addressing, oscillator connections, reset behavior, and the functions assigned to every I/O pin before routing the board. Pay particular attention to trace length, grounding, and decoupling around high-frequency clock and program-bus signals because those routes determine whether the intended 25 MHz operation is reliable in the final assembly. This product overview combines the verified Z86C93 device characteristics with practical guidance on package use, firmware resources, and board integration. It also identifies the limits of direct substitution: an equivalent-looking 8-bit microcontroller is not a true drop-in replacement unless its package pins, electrical ratings, timer resources, instruction behavior, and external memory interface are all confirmed compatible.

RFQ Contact
Z86C9325FSC - 25MHz ROMless 8-Bit MCU | Zilog | 44-QFP
Z86C9325FSC

Z86C9325FSC - 25MHz ROMless 8-Bit MCU | Zilog | 44-QFP

Zilog Z86C9325FSC is an 8-bit CMOS ROMless Z8 microcontroller operating at 25 MHz and supplied in a 44-pin QFP package. The device is based on the Z86C93 controller family and includes a hardwired 16-bit by 16-bit multiplier, a 32-bit by 16-bit divider, and three 16-bit counter timers. Its maximum supply voltage is listed as 5.00 V, while the commercial temperature grade and gull-wing surface-mount construction suit established embedded control applications. A ROMless microcontroller is an 8-bit embedded processor whose program storage is external rather than embedded in the device. The Z86C9325FSC therefore functions as a complete controller core, using external memory for firmware and data. Within the embedded-device hierarchy, it belongs to the microprocessor and microcontroller class, combines an 8-bit CPU with dedicated arithmetic and timing peripherals, and supports designs requiring deterministic control without a large embedded ROM. External program and data memory also make this architecture useful where firmware updates or field-reprogrammable logic are needed. The principal feature set includes the 25 MHz maximum clock, ROMless operation, the hardware multiplier, the divider, three 16-bit timer/counter channels, a capture register, and fast decrement mode. Additional interface signals identified for the Z86C9325 family include SCLK, IACK, SYNC, and WAIT. These characteristics make the part suitable for industrial controllers, motor-control systems, instrumentation, communications equipment, and legacy Z8-based embedded products where a compact 8-bit control engine is preferred. The Z86C93 architecture separates general control from frequently used arithmetic operations. A hardwired 16-bit by 16-bit multiplier accelerates multiplication without a software loop, while the 32-bit by 16-bit divider supports higher-width division tasks. The three 16-bit counters provide timing resources for periodic generation, event counting, pulse measurement, and motor or actuator sequencing. The capture register and fast decrement function improve handling of external timing events and countdown-style control sequences. The 44-QFP package provides 44 external connections in a square surface-mount form factor. Because this is a ROMless design, the board must provide suitable external program and data memory, address and data buses, and the required control signals. Decoupling and signal-integrity practices become particularly important because processor activity can produce fast bus transitions. The 5.00 V maximum supply rating should be treated as the principal electrical boundary during schematic design and component selection. Typical implementation involves placing the controller beside external memory and interface circuitry, then using its counters and arithmetic accelerators for control-loop or communication tasks. Firmware timing must allow for memory access and peripheral synchronization. The 25 MHz clock rate provides more computation than typical low-end 8-bit controllers, while the multiplier and divider can reduce instruction overhead in control algorithms. Firmware and memory timing should nevertheless be verified together because external memory access can affect real-time behavior. This page consolidates the device identity, package information, family-level arithmetic capabilities, sourcing guidance, and engineering trade-offs around the Z86C9325FSC. It also distinguishes a confirmed same-package replacement from functional alternatives that would require a board redesign, helping engineers identify a valid hardware substitution without confusing general MCU similarity with true pin-to-pin compatibility.

RFQ Contact
Z86C9325PSC - 25MHz 8-Bit ROMless MCU | Zilog
Z86C9325PSC

Z86C9325PSC - 25MHz 8-Bit ROMless MCU | Zilog

Zilog Z86C9325PSC is an 8-bit Z8 ROMless microcontroller operating at up to 25 MHz, with a 2.97 V to 5.5 V supply range in a 40-pin plastic DIP package. It is designed for embedded control systems that require external program memory and a compact 8-bit processing core. The through-hole package supports both prototype assembly and conventional through-hole PCB layouts. Its 40-pin PDIP form factor provides ample I/O access for sensors, switches, displays, actuators, and industrial control peripherals. An 8-bit microcontroller is a microprocessor and embedded-control IC designed around a central processing unit, memory interfaces, timers, interrupt logic, and digital I/O. The Z8 family belongs to the broader semiconductor hierarchy of embedded processors, microcontrollers, and programmable control devices. Because Z86C9325PSC is ROMless, firmware must be stored in external memory and loaded or accessed by the processor during operation. This architecture provides more flexibility than mask-programmed or one-time-programmable variants when code revisions and field updates are important. The principal device characteristics include a maximum clock frequency of 25 MHz, 8-bit processing, ROMless operation, and a 2.97 V to 5.5 V operating supply range. The Z86C9325PSC also provides the Z8 C93 controller feature set, including capture-register and fast-decrement capabilities described for this device family. Its 40-pin package exposes more signal paths than small 8-pin or 20-pin controllers, making it suitable for systems that need several inputs and outputs without adding a separate peripheral controller. The DIP package measures 0.620 inch, or 15.75 mm, across the pin row width according to the listed product information. It is a through-hole package rather than a surface-mount component, which simplifies breadboard and prototype construction but occupies more PCB area than a leadless or fine-pitch package. Because the processor has no internal program ROM, the board design must include a suitable external program-memory device and a defined memory interface. Designers should consult the pin-description and electrical tables in the manufacturer datasheet before assigning signals or laying out the external memory bus. Typical applications include industrial keypad and menu controllers, motor and stepper-control systems, instrumentation front panels, printer and scanner controllers, and general embedded automation equipment. The 25 MHz operating rate supports time-sensitive control tasks, while the broad I/O count can reduce the need for external interface expanders. Because the MCU is ROMless, it is particularly appropriate for products whose firmware must change during development or may require field revisions through an external programming arrangement. When creating a PCB, reserve a 40-pin DIP footprint, preserve the required external-memory connections, and route the clock and reset circuitry according to the manufacturer’s recommended schematic. A ROMless controller also requires attention to boot and memory-access timing. Because no public pin-description table is included in the available product records, use the manufacturer datasheet’s pin table to confirm signal names, supply pins, ground pins, and programming interface assignments before fabrication. This product page consolidates the exact device identity, supply range, package information, programming considerations, and verified same-family alternatives with practical selection guidance. It also distinguishes genuine drop-in options from differently packaged Z86C9325 variants, helping engineers assess PCB reuse, firmware constraints, external-memory requirements, and sourcing availability before committing to a design.

RFQ Contact
Z86C9325PSG - 25MHz ROMless 8-Bit MCU | Zilog
Z86C9325PSG

Z86C9325PSG - 25MHz ROMless 8-Bit MCU | Zilog

Zilog, Inc. Z86C9325PSG is a ROMless 8-bit Z8 microcontroller with a 25 MHz core clock, 236 x 8 bytes of RAM, 24 general-purpose I/O pins, and a 40-pin DIP package. Its operating-voltage range is 3 V to 5.5 V, and its integrated interfaces include EBI/EMI and UART/USART connectivity. The device is designed for embedded control systems that require external program memory and flexible peripheral expansion. A ROMless microcontroller is an embedded controller whose application program is stored in external memory rather than internal mask-programmable ROM. This architecture belongs to the broader hierarchy of microcontroller, embedded processor, embedded controller, and semiconductor. It is useful when firmware revisions, external memory sizing, or shared program storage are important. Zilog's Z8 family combines an 8-bit CPU with integrated peripherals intended for control, communications, and mixed external-memory designs. Key features include a 25 MHz operating speed, 24 general-purpose I/O pins, 236 bytes of internal RAM, an internal oscillator, and serial and external-bus interfaces. The ROMless architecture allows the program-memory implementation to be selected separately from the microcontroller. Its 3 V to 5.5 V supply range supports both 3.3 V and conventional 5 V embedded systems, although designers must observe the operating limits associated with each clock and peripheral configuration. The Z86C9325PSG architecture is organized around an 8-bit Z8 core and an external program-memory interface. EBI/EMI provides access to external devices, while UART/USART supports serial communication with sensors, host computers, and other controllers. The 24 I/O pins allow a prototype to connect digital inputs, output devices, and address or data-bus signals. Exact pin directions, interrupt behavior, and memory-interface timing should be confirmed from the manufacturer datasheet before a PCB is released. Typical uses include industrial keypad controllers, appliance control modules, serial protocol bridges, programmable instrument interfaces, and embedded systems that benefit from externally updatable or shared program memory. Because the controller is ROMless, firmware can be stored in flash, SRAM, or another suitable external memory, allowing programmers to separate hardware configuration from application code. The principal design consideration is the external-memory interface. Board layout should minimize trace lengths between the Z86C9325PSG and external memory, provide a stable clock and supply network, and preserve signal-integrity margins on the external bus. Power-supply decoupling and input protection should be sized for the attached memory and peripheral loads rather than assuming that the microcontroller alone determines the demand. This product overview consolidates the verified core specifications, interface capabilities, package information, application guidance, and sourcing questions for engineers evaluating the Z86C9325PSG. It also distinguishes documented device facts from parameters that require confirmation in the manufacturer datasheet before layout or firmware deployment.

RFQ Contact
Z86C9325VSC - 25MHz 8-Bit ROMless MCU | Zilog
Z86C9325VSC

Z86C9325VSC - 25MHz 8-Bit ROMless MCU | Zilog

The Zilog Z86C9325VSC is an 8-bit ROMless Z8 microcontroller operating at up to 25 MHz with a 2.97 V to 5.5 V supply range. It provides 24 I/O ports, 236 bytes of data memory, and a 44-pin plastic leaded chip carrier package measuring 16.6 mm by 16.6 mm. The device is designed for embedded control systems that require an external program memory and a peripheral-rich 8-bit architecture. A ROMless microcontroller is an integrated circuit that executes application software from external memory rather than storing the program internally. In the product hierarchy, the Z86C9325VSC is an 8-bit microcontroller, a microcontroller, an embedded processor, and a semiconductor. Its Z8 core and external-memory interface allow designers to use larger program-memory devices than the MCU itself provides, while the 24 I/O ports support digital control, measurement, and communication interfaces. Principal electrical characteristics include a 25 MHz maximum clock frequency, an 8-bit data bus, 24 I/O ports, and operation from 2.97 V to 5.5 V. The component is identified as an active Zilog product. Its PLCC-44 package supports through-hole board assembly and offers enough pins for dedicated port signals and external bus connections. Because program storage is external, the complete system must include a suitable program-memory device and address, data, and control connections. The architecture is based on the Zilog Z8 family and is related to the Z86C91, while providing more capable mathematical processing. The family also includes a capture register and a fast decrement mode. These features make the controller relevant to industrial control logic, measurement equipment, motor-control peripherals, and legacy embedded platforms where an established 8-bit ecosystem and deterministic peripheral behavior are important. Typical applications include programmable logic controllers, instrumentation front ends, industrial sequencers, keypad-controlled equipment, and external-processor-memory control boards. A system designer should confirm the required bus timing, memory-device interface, pin multiplexing, and clock source before finalizing the schematic. The MCU's external program memory also affects boot time, firmware organization, and the total board-level component count. One key design consideration is that the ROMless architecture is not interchangeable with a device containing internal program memory without examining the external bus and firmware requirements. Use the manufacturer pin-description table and package drawing when assigning PCB tracks, and validate signal timing against the selected external memory. This page combines device specifications, sourcing guidance, replacement analysis, and practical design considerations for engineers evaluating the Z86C9325VSC.

RFQ Contact
Z86C9325VSG - 25MHz 8-Bit ROMless MCU | Zilog
Z86C9325VSG

Z86C9325VSG - 25MHz 8-Bit ROMless MCU | Zilog

Zilog Z86C9325VSG is an 8-bit ROMless Z8-series microcontroller with a 25 MHz clock, 24 I/O ports, and a 2.97 V to 5.5 V operating supply range in a 44-pin PLCC package. It targets embedded control designs requiring an external program and data memory while retaining the Z8 peripheral architecture. A microcontroller is a programmable semiconductor that integrates a CPU core, memory interface, I/O ports, timers, and communication peripherals on one device. The Z86C9325VSG belongs to the Z8 family of 8-bit embedded controllers and is positioned as a general-purpose embedded-control component for industrial, consumer, and communications equipment. The controller combines a 25 MHz maximum clock with an 8-bit data bus and 24 I/O ports. Its 2.97 V to 5.5 V supply range supports both 3.3 V and 5 V system designs. The ROMless configuration permits firmware and data to be stored in external memory, providing greater design flexibility than a device with fixed internal program memory. The Z86C93 architecture includes a hardwired 16-bit by 16-bit multiplier, a 32-bit by 16-bit divider, and three 16-bit counter timers. A capture register and fast decrement mode support additional measurement and control functions. These resources can reduce external logic in motor, counter, signal-processing, and timing-oriented embedded systems. Typical uses include industrial controllers, appliance-control boards, communications equipment, keypad and panel interfaces, and compact embedded systems that need moderate processing speed with numerous I/O connections. External memory is required when program storage exceeds any external-memory configuration selected for the design, and the system must account for the controller’s external address and data interfaces. Layout planning should preserve access to all 44 PLCC terminals and route sensitive clock and reset signals away from noisy switching nodes. Power, decoupling, programming, and clock requirements should be implemented according to the Z86C93 manufacturer datasheet. Because this is a ROMless controller, firmware availability, boot behavior, and external-memory sizing determine whether it remains a practical upgrade option. This page combines the Z86C9325VSG specifications with package details, engineering applications, verified drop-in references, and practical selection guidance. It is designed to help engineers assess clock rate, voltage compatibility, external-memory requirements, pin count, and lifecycle status before committing a new PCB design.

RFQ Contact
Z86C9333ASG - 33MHz 8-Bit ROMless MCU | Zilog
Z86C9333ASG

Z86C9333ASG - 33MHz 8-Bit ROMless MCU | Zilog

The Zilog Z86C9333ASG is an 8-bit ROMless Z8 microcontroller operating at 33 MHz, supplied in a 48-pin LQFP package measuring 7 x 7 mm. Its 4.5 V to 5.5 V operating-voltage range suits 5 V embedded control systems where an 8-bit processor must combine straightforward peripheral integration with deterministic control performance. The part is identified as part of the C93 microcontroller family. An 8-bit microcontroller is a compact embedded processor designed to execute control instructions from externally supplied program memory. The ROMless architecture places code in external memory rather than an internal masked-ROM array, allowing the same controller to be used with different program-storage arrangements. Within the product hierarchy, the Z86C9333ASG is an embedded microcontroller, an integrated circuit, and a semiconductor intended for industrial automation, instrumentation, and equipment-control applications. The principal operating specifications are a 33 MHz clock, an 8-bit CPU architecture, and a 4.5 V to 5.5 V supply range. The device also incorporates a multiplier and divider capability according to the product description. These functions make it useful in control systems that need arithmetic scaling, frequency generation, timing measurement, or peripheral clock division without relying on a higher-cost processor architecture. The Z86C9333ASG uses a 48-pin LQFP package, providing a comparatively high pin count for an 8-bit controller and supporting connection of multiple external interfaces and memory devices. Its 7 x 7 mm body keeps the component practical for compact industrial control boards. The package exposes the controller's external program-memory interface, general-purpose I/O, and other device functions through a surface-mount footprint requiring careful signal-integrity and layout planning. Typical uses include industrial controllers, data-acquisition equipment, programmable logic controllers, instrumentation, and embedded automation modules. A designer may select this device when the application fits an 8-bit control model but requires external program memory, moderate processing speed, and extensive I/O. It can also serve as a dedicated subsystem controller alongside another processor when peripheral management or timing functions dominate the design. PCB implementation should prioritize a short, continuous ground return beneath the device and careful routing of clock, reset, and external-memory signals. Decoupling capacitors should be placed directly beside the relevant supply pins, while external program-memory routing should minimize propagation delay between the controller and memory components. Before release, verify the exact pin assignments, electrical timing, and power requirements against the Zilog datasheet. This product page combines the Z86C9333ASG's confirmed operating characteristics, application guidance, sourcing information, and design considerations in a format that helps engineers evaluate the controller before beginning PCB layout or firmware development.

RFQ Contact
Z86C9333FSC - 33MHz 8-Bit ROMless MCU | Zilog
Z86C9333FSC

Z86C9333FSC - 33MHz 8-Bit ROMless MCU | Zilog

Zilog Z86C9333FSC is a 33 MHz, 8-bit Z8 ROMless microcontroller with 236 x 8 bytes of RAM, 24 I/O lines, three 8-bit timers, UART/USART support, and EBI/EMI connectivity in a 44-pin LQFP package measuring 10 x 10 mm. Its 33 MHz operating speed provides higher throughput than conventional low-speed 8-bit controllers while retaining the simple Z8 architecture and external program-memory interface. An 8-bit microcontroller is a compact processor designed to execute embedded control logic from program memory and maintain operating state in RAM. The Z86C9333 belongs to the broader embedded-controller hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor. A ROMless architecture means the device contains no internal program ROM, so firmware must be supplied through an external memory interface. This architecture is useful when programs, firmware revisions, or memory sizes must remain flexible. The verified feature set includes ROMless operation at 33 MHz, 236 bytes of RAM, 24 I/O lines, three 8-bit timers, UART communication, and EBI/EMI interfaces. The 44-LQFP surface-mount package exposes substantially more signal pins than small dual-inline packages, supporting parallel external memory and additional peripheral connectivity while remaining compatible with automated PCB assembly. The Z86C9333 architecture is intended for embedded control rather than high-compute workloads. Its external program-memory interface allows the stored firmware size to be established outside the MCU, while its three timers support periodic counting, timing, and event generation. UART/USART communication enables connection to host systems, sensors, or other controllers, and EBI/EMI provides an external bus-oriented path for additional devices. Typical applications include industrial keypad controllers, serial data concentrators, instrumentation interfaces, embedded control panels, and compact automation modules. In these systems, the 33 MHz speed can improve response to serial traffic and control tasks, while the 24 I/O lines reduce the need for separate I/O expanders. The ROMless configuration is particularly valuable when the same MCU platform must cover several firmware versions or board configurations. Designers must account for external program-memory timing, address decoding, bus contention, and required support components when using the ROMless configuration. PCB layout should minimize routing delay and preserve signal integrity on external bus and UART lines. Software must also provide the vector table and reset behavior expected by the external memory system. Because the verified data does not state supply voltage, timing margins, or detailed pin assignments, those values should be confirmed in the manufacturer documentation before schematic capture. This product page consolidates verified distributor specifications, same-package replacement information, application guidance, and design cautions. It distinguishes confirmed Z86C9333FSC characteristics from unavailable electrical details so procurement and engineering decisions can be made without inventing package, pin, or lifecycle information.

RFQ Contact
Z86C9333VSG - 8-Bit 33MHz ROMless MCU | IXYS
Z86C9333VSG

Z86C9333VSG - 8-Bit 33MHz ROMless MCU | IXYS

The IXYS Z86C9333VSG is an 8-bit, 33 MHz ROMless Z8-series microcontroller packaged in a 44-lead J-leaded LCC measuring 16.6 mm by 16.6 mm. It operates from a 4.5 V to 5.5 V supply and is intended for embedded control systems requiring an external memory interface, compact surface-mount construction, and a moderately high operating clock. A microcontroller is a programmable semiconductor that integrates a CPU, memory interfaces, I/O ports, timers, and peripheral functions on one device. The Z8 family belongs to the broader hierarchy of 8-bit microcontrollers, embedded processors, semiconductor integrated circuits, and electronic control components. A ROMless configuration means the device does not contain its final program storage internally; an external memory device is therefore part of the complete embedded design. Key characteristics include the 8-bit CPU architecture, 33 MHz maximum clock, ROMless program-memory architecture, and 4.5 V to 5.5 V operating supply. Its 44-LCC J-lead package supports compact industrial, consumer, and embedded-control assemblies without relying on a fine-pitch BGA package. The package is identified as surface-mount technology and uses J-shaped terminals designed for board attachment and mechanical inspection. The device is specifically described as a Z8-series microcontroller and as an embedded controller. Its operating architecture allows firmware and data to be organized in external memory, which can provide flexible field-programmable behavior, reusable platform designs, and separation between application code and the microcontroller package. At 33 MHz, the processor is suited to control loops, human-interface tasks, protocol handling, and supervisory functions that require more scheduling headroom than a basic low-speed microcontroller. Typical applications include industrial machine controls, instrumentation panels, motor and actuator supervisory systems, building-control interfaces, programmable logic controllers, and compact embedded control products. The 4.5 V to 5.5 V supply range is suitable for regulated 5 V system rails. Designs should provide suitable external program and data memory, power decoupling, oscillator circuitry, and a reset arrangement appropriate to the selected Z8 memory interface. The primary engineering consideration is that ROMless operation requires additional memory and careful bus implementation. Place the external memory, controller, and associated routing as a coordinated subsystem, following the pin-description and reference-circuit guidance in the manufacturer datasheet. Confirm signal timing and memory-map compatibility before PCB release because the CPU clock, external memory access, and I/O behavior must operate as one consistent design. This page consolidates verified package, clock, supply, architecture, and lifecycle information into an engineering-oriented product record. It also separates confirmed Z86C9333VSG characteristics from unresolved memory and peripheral details, compares related Z8 devices, and highlights practical verification steps for external-memory, decoupling, and pinout decisions.

RFQ Contact
Z86C9533VSC - CMOS Z8 DSP Microcontroller | Zilog
Z86C9533VSC

Z86C9533VSC - CMOS Z8 DSP Microcontroller | Zilog

Zilog Z86C9533VSC is a CMOS Z8 microcontroller with an embedded digital signal processor, combining general-purpose microcontroller control with dedicated DSP processing in a 84-pin leadless chip carrier package. It belongs to the Z8 family of highly integrated embedded controllers designed for applications requiring both digital control and real-time signal processing. The Z86C95 architecture is ROMless, allowing program storage and boot code to be implemented in external memory. A digital signal processor, commonly abbreviated as DSP, is a semiconductor architecture optimized for operations used in signal processing, including multiplication, accumulation, filtering, waveform generation, and spectral analysis. The Z8 MCU hierarchy combines a conventional embedded-control environment with an embedded DSP engine. This integration can reduce the need for separate processor packages when a system must perform control functions and process sampled or generated signals concurrently. The principal identifiable features of the Z86C9533VSC are its CMOS construction, Z8 single-chip microcontroller architecture, embedded DSP processor, ROMless configuration, and 84-pin LCC package. Its integration is useful when a product needs deterministic embedded control alongside digital signal-processing functions. Exact processor clock, memory, I/O, electrical limits, temperature range, and package dimensions must be confirmed against the manufacturer datasheet before schematic capture or firmware development. The Z86C9533VSC belongs to the Z86C95 MCU family, which combines microcontroller functionality with an embedded DSP processor. A ROMless architecture generally requires external program memory, so designers should plan the memory interface, reset behavior, bus timing, and firmware loading method as an integrated part of the system architecture rather than treating memory as an afterthought. Firmware development also requires the correct Z8 toolchain, device programming method, interrupt configuration, and peripheral initialization sequence. Typical uses include digital audio and communications, industrial signal conditioning, motor and motion control, communications equipment, and embedded systems that combine a control loop with real-time waveform processing. The LCC-84 format provides many external connections compared with a small leaded microcontroller package, making it suitable for systems requiring multiple peripheral, bus, and control signals while still allowing board-level miniaturization. PCB implementation requires careful attention to exposed-pad or thermal requirements if present, supply decoupling, signal integrity, and programming access. Because this is a fine-pitch leadless package, verify land geometry and assembly tolerances against the manufacturer package drawing. A new design should also confirm peripheral multiplexing and pin assignments in the datasheet rather than inferring them from the larger Z8 family. This product page organizes the available Z86C9533VSC identity, packaging information, sourcing path, and engineering considerations. It also separates documented facts from unverified numeric details, helping engineers move from part selection to datasheet verification without relying on assumptions about clock speed, memory size, or electrical performance.

RFQ Contact
Z86C9620PSC - 20MHz ROMless 8-Bit Z8 MCU | Zilog | 64-Pin SDIP
Z86C9620PSC

Z86C9620PSC - 20MHz ROMless 8-Bit Z8 MCU | Zilog | 64-Pin SDIP

The Zilog Z86C9620PSC is a CMOS 8-bit Z8 microcontroller that operates at up to 20 MHz, uses a ROMless architecture requiring external program memory, and is supplied in a 64-pin rectangular SDIP through-hole package in the commercial temperature grade. The device belongs to Zilog's Z8 family of Z80-derived controllers, which combine an 8-bit CPU core with on-chip peripherals and external code/data memory interfaces. The "PSC" ordering code identifies the plastic 64-pin DIP outline, the commercial temperature range, and the surface-mount-compatible leadless-free pin count used in through-hole industrial and commercial control boards. A microcontroller is a complete single-chip computer: it integrates a CPU core, non-volatile program storage, RAM, timers, serial interfaces, and I/O ports on one die. Within the Z8 family the key architectural option is "ROMless", meaning the device contains no internal program memory and instead fetches code from an external EPROM or Flash memory chip through the address/data bus. That choice frees board space and lets the designer select code density independently, at the cost of one or two extra memory components and bus routing complexity. Key features of this part include a 20 MHz maximum clock frequency, an 8-bit CMOS CPU core, a 64-pin through-hole package that is easy to hand- and machine-solder, and a broad set of on-chip I/O and timer resources typical of the Z8 line. Because the Z8 core is a Z80 derivative, existing Z80 assembler toolchains and Z8 application notes can be reused, shortening the learning curve for teams migrating from legacy 8-bit designs. Architecturally, the Z86C9620 combines a pipelined 8-bit CPU with an external bus capable of addressing external code and data memory, plus dedicated port pins, timer/counter blocks, and serial peripheral interfaces. Clocking is externally supplied, so a crystal or oscillator network is required to reach the 20 MHz operating point; the maximum frequency is a datasheet limit rather than a guaranteed operating point for every peripheral configuration. Run-time behaviour depends on the external memory map, so the same silicon can serve very different products purely through firmware and memory sizing. Typical deployments include industrial control panels, burner or programming stations, appliance controllers, HVAC and building-automation modules, motor and relay sequencers, instrument front panels, and legacy equipment retrofits where a 20 MHz 8-bit CPU with external program memory is sufficient. Because the package is a through-hole SDIP, the part is also well suited to prototypes and small production runs assembled on through-hole assembly lines. The main design consideration for this controller is external memory: the board must provide a working EPROM or Flash device with a stable address and data bus, correct wait-state timing if the memory is slower than the CPU, and decoupling close to the memory pins. Because the 64-pin DIP footprint exposes both address and data lines, board layout must keep the bus short and clean, and unused port pins should be tied to defined levels so that reset behaviour stays deterministic.

RFQ Contact