Zilog

Z86E3312VSC - 8-Bit 12MHz 4KB OTP MCU | Zilog | Embedded Control

MPN: Z86E3312VSC ✓ Active
28-pin PLCC Package 12 MHz Speed One-time programmable (OTP) Memory
MOQ: 1 |

Z86E3312VSC Overview

The Zilog Z86E3312VSC is an 8-bit Z8 microcontroller operating at up to 12 MHz, with 4 KB of one-time-programmable memory in a 28-pin PLCC package. It is designed for compact embedded-control tasks requiring a modest instruction set, one-time-programmable firmware storage, and a surface-mount package suitable for automated assembly.

An 8-bit microcontroller is a semiconductor integrated circuit that executes embedded-control instructions from fixed program memory and interacts with external hardware through digital and analog peripherals. Within the product hierarchy, the Z86E3312VSC belongs to the microcontroller class of embedded processors. Its Z8 architecture is intended for cost-sensitive control logic, while the 4 KB OTP program memory is best suited to relatively compact firmware rather than connectivity-heavy or graphics-oriented applications.

Key device characteristics include an 8-bit processor core, 4 KB of OTP program memory, a 12 MHz operating frequency, and a 28-pin J-lead PLCC package. OTP memory allows the final firmware image to be programmed during manufacturing, which is useful for products whose firmware is stable and does not require field updates. The 12 MHz clock rate provides additional processing headroom for peripheral servicing and structured control routines compared with slower general-purpose 8-bit controllers.

The PLCC package provides a defined lead arrangement and supports compact, high-density PCB layouts, although it requires adequate spacing and controlled assembly for its J-shaped leads. Because the MCU is designed around OTP rather than flash memory, engineers should establish the firmware requirements and programming process early in development. The manufacturer datasheet remains the authoritative source for clock, electrical, timing, programming, and peripheral details before schematic capture.

Typical uses include simple industrial control modules, appliance controllers, building automation endpoints, lighting controllers, sensor-conditioning systems, and compact embedded products where 4 KB of OTP code is sufficient. The device is also appropriate for low-cost dedicated controllers that monitor digital inputs, operate actuators, and require deterministic operation without user-accessible firmware updates.

The primary design consideration is program-memory capacity. Engineers should confirm that application code, interrupt handlers, lookup tables, and boot requirements fit within 4 KB before selecting the MCU, and should verify all 28 package connections against the manufacturer pin description. Clock settings, timing margins, I/O limits, and programming signals must also be reviewed in the manufacturer datasheet before release to production.

This product record combines the exact package and core specifications, practical embedded-control applications, structured comparison parameters, and design guidance for engineers evaluating the Z86E3312VSC. It is intended to accelerate component selection while keeping final design decisions tied to the manufacturer documentation.

Drop-in alternatives for Z86E3312VSC — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Z86E3312VSG

✅ Drop-In
📦 28-pin PLCC
Same 28-pin PLCC format, 12 MHz operation, and Z8 microcontroller class; temperature-grade and ordering-suffix conditions require final verification.

📋 Reference alternative (not in catalog)

Z86E3312VSC Maximum Ratings & Electrical Characteristics

Microcontroller Type 8-bit Z8 microcontroller
Maximum Clock Frequency 12 MHz
Program Memory Type One-time programmable (OTP)
Program Memory Size 4 KB
Program Memory Organization 4K x 8 bits
Package Type 28-pin PLCC
Number of Pins 28 pins
Lead Form J-bend
Package Shape Square
Package Code QCCJ
Temperature Grade Commercial
Mounting Type Surface mount
Core Processor Z8 8-bit processor
RoHS Status Unknown
REACH Status Unknown

Z86E3312VSC qccj Pin Configuration Guide

Pin configuration for Z86E3312VSC (qccj package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

qccj package pinout diagram for Z86E3312VSC

No detailed pinout data available for Z86E3312VSC.

Refer to the datasheet for full pin configuration.

Typical Applications

Z86E3312VSC is suitable for 6 applications: Industrial Appliance Control, Building Automation Endpoint, Lighting Control Module, Sensor Monitoring System, Smart Home Interface, Dedicated Automotive Accessory Controller.

🏭

Industrial Appliance Control

The Z86E3312VSC fits compact appliance and equipment controllers because its 8-bit Z8 core runs at up to 12 MHz while its 4 KB OTP memory is sufficient for stable, fixed control firmware. The controller can sequence motors, read switches, update indicators, and coordinate simple sensors without a large external memory device. The 28-pin PLCC package also supports automated PCB assembly, although lead geometry and footprint clearance must follow the manufacturer land pattern. Because OTP programming is permanent, validate all application code, constants, and interrupt routines before production programming. Verify supply voltage, I/O limits, and timing requirements in the manufacturer datasheet before assigning every peripheral.

🧩

Building Automation Endpoint

The Z86E3312VSC can serve as the local controller in a building-automation endpoint for lighting, occupancy, temperature, or equipment-state monitoring. Its 12 MHz operating frequency provides enough execution capability for periodic sensing, debouncing, state logic, and actuator commands, while the compact 28-pin PLCC footprint helps limit board size. A practical implementation would use the MCU for real-time I/O handling and local fail-safe behavior rather than cloud connectivity. Confirm the required number of I/O pins and the available timers or serial interfaces in the manufacturer datasheet. OTP is appropriate when the building-automation firmware is fixed during commissioning and does not need frequent field updates.

💡

Lighting Control Module

The Z86E3312VSC is appropriate for a dedicated lighting-control module that accepts user inputs, drives switching elements, and applies timing or scene logic. Its 8-bit architecture and 12 MHz clock support deterministic control without an external processor, and the 4 KB OTP program store can hold compact lookup tables and state-machine code. The design should account for the electrical isolation, drive voltage, and switching transients required by the LEDs or power stage because the MCU itself is the low-voltage control element. Use the manufacturer pin and electrical tables to select suitable I/O and timing margins. Permanent OTP firmware favors products whose lighting behavior is fully validated before manufacturing.

📱

Sensor Monitoring System

The Z86E3312VSC works well as a dedicated sensor-hub controller when it must acquire switch or digital-sensor inputs, filter readings, and maintain local operating state. At up to 12 MHz, the Z8 core can service timed measurements and deterministic control routines, while the 28-pin PLCC package provides a defined lead arrangement for compact boards. External analog-to-digital conversion, signal conditioning, or sensor-interface components may be required depending on the measured quantity, so the MCU's documented peripheral capabilities must be checked before finalizing the architecture. The 4 KB OTP capacity suits compact, fixed monitoring logic. For firmware that must be updated after deployment, choose a flash-memory MCU rather than forcing an OTP device into that workflow.

🧩

Smart Home Interface

The Z86E3312VSC can implement a local smart-home interface for switches, relays, sensors, and status indicators in a compact product. Its 12 MHz Z8 core is suitable for continuous input handling and protocol service when the design stays within the device's documented timer and serial-interface resources. The 28-pin PLCC package allows a relatively compact through-hole-style surface-mount layout, but adequate spacing should be maintained for assembly and inspection. Because firmware is stored in OTP, the product should not depend on post-deployment firmware revisions. Verify package pin functions, supply voltage, oscillator arrangement, and programming signals in the manufacturer datasheet, then validate that the complete application remains within the 4 KB program-memory limit.

🚗

Dedicated Automotive Accessory Controller

The Z86E3312VSC can serve as a dedicated controller in a simple accessory module where the required behavior is limited, the 8-bit processing load is modest, and firmware will not change after programming. The 12 MHz operating rate supports button decoding, relay or solenoid sequencing, LED indication, and periodic diagnostics. It is not appropriate to assume automotive qualification from the generic commercial-grade designation; environmental qualification, transient protection, and temperature requirements must be confirmed in the manufacturer documentation. The 28-pin PLCC package also requires careful inspection and soldering control. Keep transient-producing loads and motor energy away from sensitive signal paths, and verify supply and I/O limits against the manufacturer electrical characteristics.

What is the Z86E3312VSC?
The Z86E3312VSC is an 8-bit Zilog Z8 microcontroller with a 12 MHz maximum operating frequency and 4 KB of one-time-programmable memory. It is packaged in a 28-pin PLCC with J-bend leads. According to the Zilog manufacturer datasheet, this combination makes it suitable for compact embedded controllers that do not require large flash memory, field firmware updates, or a high-pin-count peripheral arrangement.
What is the operating frequency of the Z86E3312VSC?
The Z86E3312VSC operates at up to 12 MHz. This clock rate supports execution of its 8-bit Z8 instruction set and peripheral activity in embedded-control designs. The Zilog manufacturer datasheet is the controlling reference for clock-source configuration, oscillator requirements, timing limits, and recommended operating conditions. It should also be consulted before assuming that every peripheral can operate concurrently at the maximum clock frequency.
How much program memory does the Z86E3312VSC have?
The Z86E3312VSC contains 4 KB of one-time-programmable memory, organized as 4K x 8 bits. Because OTP memory cannot be rewritten after programming, the final firmware must be validated before programming. According to the Zilog manufacturer datasheet, engineers should reserve this capacity for code, constants, interrupt routines, and any bootloader functions required by the finished product.
What package does the Z86E3312VSC use?
The Z86E3312VSC uses a 28-pin PLCC package with J-bend leads, a square body, and package code QCCJ. According to the Zilog manufacturer datasheet, this is a surface-mount package intended for compact PCB assemblies. The PLCC footprint should be checked against the manufacturer land pattern and assembly requirements, particularly lead spacing, solder-joint volume, and cleaning practices.
Where can I download the Z86E3312VSC datasheet PDF?
The Z86E3312VSC datasheet PDF can be downloaded from the datasheet source linked on this product page. The document should be used to verify the pin descriptions, electrical characteristics, clock setup, OTP programming procedure, and recommended application circuits. Search the PDF for the Z86E3312 ordering information and the specific package code to ensure that the document covers the 28-pin PLCC version being designed.
Where can I find the Z86E3312VSC pinout?
The Z86E3312VSC pinout is found in the pin-description table of the Zilog manufacturer datasheet. Use that table when assigning the 28 PLCC pins to power, ground, clock, programming, reset, and I/O functions. The package drawing also identifies the physical orientation, so the pin numbering must be checked against the actual board layout rather than inferred from a generic 28-pin symbol.
What can replace the Z86E3312VSC?
The Z86E3312VSG is the closest identified replacement because it uses the same 28-pin PLCC format and the listed operating characteristics remain consistent with the target. It is treated as a drop-in alternative only after confirming temperature-grade, availability, and programming requirements. Other Z8 devices may provide similar functions, but a different package or memory arrangement would require PCB and firmware changes rather than a direct substitution.
Is the Z86E3312VSC the same as the Z86E3312VSG?
The Z86E3312VSC and Z86E3312VSG are listed as compatible 12 MHz, 28-pin PLCC Z8 microcontrollers, but the suffix must still be checked against the manufacturer ordering table. The target is identified as commercial grade, while exact temperature limits and suffix-specific operating conditions should be verified in the datasheet. Use the Z86E3312VSG as a drop-in candidate only when those conditions and the programming workflow match.
When should I choose the Z86E3312VSC over the Z86E3312VSG?
Choose the Z86E3312VSC when its commercial-grade specification, package marking, OTP programming process, and procurement configuration match the product requirement exactly. Consider the Z86E3312VSG when its manufacturer-defined temperature grade and ordering suffix are preferable for the operating environment. The decisive checks are temperature range, pin definition, firmware compatibility, and qualification rather than clock speed, which is 12 MHz for both listed devices.
Is the Z86E3312VSC suitable for an appliance controller?
The Z86E3312VSC is suitable for a compact appliance controller when the complete firmware fits within 4 KB of OTP memory and the required I/O and timing functions are confirmed by the manufacturer datasheet. Its 8-bit Z8 core and 12 MHz operating frequency are appropriate for sequencing relays, reading switches, driving indicators, and monitoring basic sensors. It is less suitable for applications needing field-updateable firmware.
Z86E3312VSC vs Z86E3312VSG: which is better for industrial control?
The better choice between the Z86E3312VSC and Z86E3312VSG depends primarily on their manufacturer-defined temperature grades and lifecycle conditions. Both are identified as 12 MHz, 28-pin PLCC devices with the same 4 KB OTP memory class, so basic controller sizing remains similar. For industrial equipment, confirm the minimum and maximum operating temperatures, then select the suffix explicitly approved for that enclosure and ambient range.
What is the best Zilog equivalent for the Z86E3312VSC?
The Z86E3312VSG is the best identified Zilog equivalent because it retains the same 28-pin PLCC package and is described as functionally and pin compatible with the Z86E3312VSC. No independently verified cross-brand drop-in equivalent was identified. A competitor device should not be treated as drop-in unless its complete pin description, memory map, clock behavior, peripheral set, voltage range, and programming interface are proven equivalent.
Where can I buy the Z86E3312VSC and what is its lead time?
Use the Request a Quote form on this page to ask for Z86E3312VSC availability, current unit pricing, minimum order quantity, and production lead time. The form provides a direct purchasing path without embedding a static price that may quickly become outdated. Include your required package quantity, programming method, and target delivery schedule so the supplier can confirm the appropriate configuration.
Is the Z86E3312VSC in stock?
The Z86E3312VSC should be treated as a request-for-quote component because current stock is not confirmed by a quantity-specific listing. Use the Request a Quote form on this page and state the quantity and required packaging. The manufacturer part number and OTP programming requirements should be included in the request to avoid mismatched or unprogrammed assemblies.
What are the key specifications of the Z86E3312VSC that engineers should know?
The key Z86E3312VSC specifications are an 8-bit Z8 core, 12 MHz maximum operating frequency, 4 KB of one-time-programmable program memory, and a 28-pin PLCC package with J-bend leads. According to the Zilog manufacturer datasheet, the device is classified as an 8-bit microcontroller in commercial temperature grade. RAM, supply voltage, detailed I/O limits, and peripheral functions must be confirmed from the datasheet before schematic release.

Engineering reference data for Z86E3312VSC — comparison, design guidance, and compliance information.

Selection Guide

Choose the Z86E3312VSC when the product needs an 8-bit Z8 controller with a 12 MHz maximum clock, 4 KB of OTP program memory, and a 28-pin PLCC footprint, and the commercial-grade operating limits match the enclosure. The OTP memory is attractive for stable, fixed firmware, but it makes complete code validation especially important. The Z86E3312VSG is the closest identified drop-in candidate because it uses the same package and core-performance class; select it when its manufacturer-defined temperature grade and lifecycle conditions better fit the application. Do not choose a cross-brand substitute unless its pinout, clock system, memory map, interrupt behavior, supply voltage, and programming interface have all been verified. If the firmware exceeds 4 KB, requires frequent field updates, or needs substantially more peripherals, move to a flash-memory or higher-capacity MCU rather than forcing an exact mechanical replacement.

Comparison with Alternatives

Parameter This Product Z86E3312VSG
Package 28-pin PLCC 28-pin PLCC
Brand Zilog Zilog
Processor Architecture 8-bit Z8 8-bit Z8
Maximum Clock Frequency 12 MHz 12 MHz
Program Memory 4 KB OTP 4 KB OTP
Program Memory Organization 4K x 8 bits 4K x 8 bits
Pin Count 28 pins 28 pins

Key Differentiators

  • Directly identified same-package Zilog alternative (vs Z86E3312VSG)
  • Compact 8-bit control architecture (vs Z86E3312VSG)
  • Manufactured for permanent production programming (vs Z86E3312VSG)

Design Notes

Confirm that the final application, interrupt handlers, constants, and optional boot code fit within the 4 KB OTP program memory before creating production programming files. OTP cannot be rewritten after programming, so a functional but oversized or incorrectly linked image cannot be corrected in the field. Use a representative production build and inspect its memory-map report, then validate the exact image on hardware before authorizing programming.

Follow the manufacturer land pattern for the 28-pin PLCC and verify pin 1 orientation, lead pitch, and solder-joint clearance against the package drawing. Maintain adequate spacing between J-bend leads to support visual inspection and automated optical inspection. Place programming, clock, and decoupling connections according to the manufacturer application guidance rather than treating the package as a generic 28-pin PLCC.

Verify the device's supply-voltage range, I/O limits, and power-consumption figures in the manufacturer datasheet before connecting external signals. Use a local regulator or other protected supply arrangement so switching noise and transients do not reach the MCU rails. Because exact electrical limits are required for final validation, do not infer safe input or output levels from the 12 MHz clock specification.

Keep clock and programming traces short, provide a stable return path, and place required bypass components close to their device pins. The 28-pin PLCC footprint should be checked against the board's assembly process and component-height constraints. If the board also contains relays, motors, or switching power stages, separate their current paths from sensitive controller traces to reduce noise coupling and ground-current transients.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The manufacturer documentation linked on this page should be checked for environmental, material-declaration, and automotive qualification information. The target is identified as commercial grade, but no automotive qualification claim is made.

Related Searches

Z86E3312VSC datasheet Z86E3312VSC datasheet pdf Z86E3312VSC pinout Zilog Z86E3312VSC Z86E3312 12MHz microcontroller Z86E3312VSC equivalent Z86E3312VSC replacement Z86E3312VSC vs Z86E3312VSG Z86E3312VSC price Z86E3312VSC stock Z86E3312 28-pin PLCC Z86E3312VSC embedded controller

Related Components & Terms

Zilog Z86E3312VSC Z86E3312VSG Z8 8-bit microcontroller embedded controller integrated circuit semiconductor one-time programmable memory OTP 12 MHz 4 KB 28-pin PLCC PLCC package family surface mount J-bend lead commercial temperature grade industrial control appliance control building automation sensor monitoring smart home interface lighting control RoHS REACH
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details