ADC/DAC
بەرهەمەکان (3,600+)
MCP3422A6-E/MS - 18-Bit 2-Input ADC | Microchip Technology
The Microchip Technology MCP3422A6-E/MS is a low-noise 18-bit delta-sigma analog-to-digital converter with two differential inputs, a 3.75 Hz conversion rate, and an 8-MSOP package. It operates from 2.7 V to 5.5 V and uses an I²C interface for digital communication. The onboard 2.048 V precision reference supports a differential input range of ±2.048 V. A delta-sigma ADC is a voltage-to-digital converter that samples an analog input and converts it through continuous-time integration and noise shaping before digital filtering. This architecture belongs to the ADC hierarchy and is particularly useful when low noise, high resolution, and limited conversion bandwidth are more important than rapid sampling. The MCP3422 combines these characteristics with differential analog inputs and a small package. The MCP3422A6 provides conversion resolution up to 18 bits, two analog input channels, and an onboard reference. Its low-noise architecture is suited to precision measurements rather than waveform capture. The 3.75 Hz rate makes it appropriate for slowly changing inputs such as temperature, pressure, load-cell, and industrial process signals. Differential inputs also help reject common-mode disturbance when the source is connected appropriately. Microchip Technology positions the MCP3422 within the MCP342X family of low-noise, high-accuracy converters. The device combines an internal reference, programmable gain, differential inputs, and an I²C digital interface in an 8-MSOP package. The resolution and low conversion rate create a favorable combination for instrumentation but make the converter unsuitable for high-bandwidth signals or audio-rate sampling. Typical applications include precision temperature sensing, pressure transducers, load cells, battery monitoring, current measurement, environmental instrumentation, and low-frequency industrial data acquisition. The MCP3422A6 is especially useful where differential analog conditioning, an internal reference, and a compact PCB footprint reduce the number of external components. PCB implementation should preserve a quiet analog ground path and place input, reference, and decoupling connections according to the manufacturer datasheet. Verify the selected conversion mode, data rate, gain, and I²C address in firmware because resolution and latency are coupled to the operating mode. This product record combines the manufacturer device description with distributor package, voltage, conversion-rate, and RoHS information. It also organizes same-family drop-in options and engineering guidance around the MCP3422A6-E/MS for faster component selection and board-level planning.
MCP3422A6-E/SN - 18-Bit Dual-Channel ADC | Microchip
Microchip Technology MCP3422A6-E/SN is an 18-bit, dual-channel delta-sigma analog-to-digital converter with a 3.75 samples-per-second conversion rate, differential inputs, an I2C interface, and an 8-pin SOIC package. It includes an onboard precision 2.048 V reference and supports a differential input range of ±2.048 V. The -E/SN ordering identifies the extended-temperature device supplied in a tube. An analog-to-digital converter is an integrated circuit that converts continuous analog voltage signals into digital codes for processing, measurement, or control. Delta-sigma ADCs belong to the ADC family within data-converter and signal-chain ICs. They use oversampling, digital filtering, and noise shaping to obtain high resolution without requiring a high-frequency flash-converter clock. The MCP3422 combines this measurement architecture with two differential channels, an integrated voltage reference, programmable gain, and a serial host interface. Principal features include 18-bit resolution, two differential input channels, and a precision 2.048 V onboard reference. The converter supports 3.3 V and 5 V operation, uses an I2C interface, and provides auto-calibration and power-on reset functions. Differential measurement helps reject common-mode voltage and supply noise when the signal source is arranged symmetrically. Programmable gain allows the ADC to scale smaller sensor outputs without sacrificing use of its available input range. The sigma-delta architecture favors low-noise, high-resolution measurements at low sample rates rather than high-speed waveform capture. The 3.75 SPS rate is appropriate for temperature, pressure, strain, load-cell, potentiometer, and slow industrial process signals. Internal offset and gain calibration improve accuracy over operating conditions, while the onboard reference reduces the number of external precision components required for moderate-accuracy systems. Typical uses include battery-powered instrumentation, factory process monitoring, pressure and temperature sensors, low-rate data loggers, portable measurement equipment, and industrial control boards. Differential sensor inputs are especially useful when the measured quantity appears as a small voltage across a bridge or sensor pair. The I2C interface also allows the converter to share a two-wire bus with a host microcontroller or other low-speed peripherals. When designing a board around the MCP3422A6-E/SN, route the analog inputs and reference circuitry away from switching nodes and digital return currents. Place input filtering close to the ADC pins, use a quiet analog supply path, and verify that signal common-mode voltage remains inside the device operating limits. Anti-alias filtering, input settling time, and the configured conversion period must be evaluated together rather than treating the nominal sample rate as an unrestricted bandwidth specification. This product page combines the manufacturer device description with distributor specifications, application guidance, package information, and a drop-in-focused comparison with other MCP3422 gain and conversion-rate options. It also identifies where application-specific data must be checked in the manufacturer datasheet before schematic release or production qualification.
MCP3422A7-E/MC - 18-Bit Dual-Input ADC | Microchip Technology
The Microchip Technology MCP3422A7-E/MC is an 18-bit, dual-input delta-sigma analog-to-digital converter with differential inputs, an integrated precision 2.048 V reference, and a two-wire I2C-compatible interface. It operates from a single 2.7 V to 5.5 V supply and is packaged in an 8-pin DFN measuring 2 x 3 mm. The MCP3422A7-E/MC supports a differential input range of plus or minus 2.048 V with its internal reference. A delta-sigma ADC is a voltage-to-digital converter category that uses oversampling, noise shaping, and digital filtering to obtain high resolution from low-resolution internal converters. The MCP3422 belongs to the broader ADC, data-converter, and semiconductor hierarchy. Its differential architecture is useful when the measured signal is centered around a bias voltage, while its low-noise design supports precision instrumentation, industrial measurement, and sensor acquisition systems. The principal features include resolution up to 18 bits, two differential input channels, a 3.75 Hz conversion rate for this configuration, and a programmable gain amplifier. The converter uses a 2.048 V on-board precision reference and communicates through a two-wire I2C-compatible serial interface. A single supply range of 2.7 V to 5.5 V allows the device to operate in both 3.3 V and 5 V systems. Delta-sigma conversion trades conversion speed for resolution and noise performance. The MCP3422 family is therefore most appropriate for slowly changing sensor signals, process-control variables, temperature measurements, pressure readings, and low-bandwidth instrumentation rather than high-rate waveform acquisition. Differential inputs can reduce common-mode noise when the source is balanced and both signal wires have similar impedances and layout symmetry. Typical applications include industrial process monitoring, bridge-sensor and pressure-sensor interfaces, battery monitoring, laboratory measurement equipment, environmental sensing, and low-rate data acquisition. The integrated 2.048 V reference provides a convenient full-scale basis for differential measurements, while the PGA allows the analog front end to accommodate signals closer to the differential input range. PCB implementation requires careful attention to analog grounding, supply bypassing, and differential routing. Place the decoupling capacitor close to the supply and ground pins, keep the analog input traces short, and route the two inputs as a matched pair. A common ground reference and balanced source impedance help preserve the common-mode rejection and noise advantages inherent to the differential converter. This product page combines the MCP3422A7-E/MC specifications, verified manufacturer information, family-level drop-in alternatives, and practical PCB guidance. It supports faster part selection by distinguishing protocol, package, channel-count, resolution, and conversion-rate considerations while keeping the final component decision grounded in the manufacturer documentation.
MCP3422A7-E/MS - 18-Bit 2-Channel 240 SPS ADC | Microchip Technology
The Microchip Technology MCP3422A7-E/MS is an 18-bit, low-noise, high-accuracy delta-sigma analog-to-digital converter with two differential input channels, an integrated 2.048 V reference, and an I2C serial interface. It converts analog inputs at up to 240 samples per second and is packaged in an 8-MSOP. The device is designed for precision measurement systems that require accurate differential conversion, flexible analog gain, and a compact two-wire digital interface. An ADC is a data-conversion IC that transforms continuous analog voltage into a digital numerical code for processing, measurement, or control. The MCP3422 belongs to the delta-sigma ADC family, where an internal modulator and digital filter shape the conversion process. In the broader semiconductor hierarchy, the MCP3422 is an ADC, then an analog and mixed-signal IC, and finally a semiconductor used in embedded measurement and instrumentation systems. The MCP3422A7-E/MS provides up to 18-bit resolution, two differential inputs, an onboard precision 2.048 V reference, and a differential input range of plus or minus 2.048 V. Its 240 SPS conversion rate is suitable for slow-changing process, sensor, and instrumentation signals rather than high-speed waveform acquisition. The two-channel architecture allows simultaneous monitoring of two related measurements or differential sensing of a bridge or transducer. The converter uses an I2C-compatible two-wire interface to transfer conversion results and configure operating conditions. Its differential input structure helps reject common-mode noise when the sensor is connected through balanced wiring. The integrated reference reduces the number of external components needed for ratiometric or absolute measurements, although the application must account for reference accuracy, noise, and power-supply behavior. Typical uses include industrial process monitoring, low-frequency sensor acquisition, pressure and temperature measurement, environmental instrumentation, and embedded data acquisition systems. For bridge-based sensors, the differential inputs can reject much of the excitation-signal noise present on both sensor lines. For slowly varying voltages, the 240 SPS rate provides sufficient conversion bandwidth while averaging noise through the converter's digital filtering. PCB implementation should prioritize short, symmetric analog traces, a quiet ground return, and separation between the analog inputs and switching nodes. The datasheet pin-description table should be used when assigning connector and test points. Verify the selected gain, conversion timing, reference configuration, and digital pull-ups before committing the layout. This product page combines the manufacturer's device description with package, application, comparison, and design guidance for engineers evaluating the MCP3422A7-E/MS in precision, low-speed measurement systems.
MCP3422A7-E/SN - 18-Bit Dual-Channel ADC | Microchip
Microchip Technology MCP3422A7-E/SN is a two-channel, 18-bit delta-sigma analog-to-digital converter with differential inputs, an on-board 2.048 V precision reference, and conversion rates up to 4 samples per second, packaged in an 8-pin SOIC. It converts differential analog signals into high-resolution digital codes for precision measurement and control systems. A delta-sigma ADC is a voltage regulator–independent type of analog-to-digital converter that uses continuous-time delta-sigma modulation, digital filtering, and decimation to produce high-resolution results. The MCP3422 belongs to the ADC > delta-sigma ADC > analog-to-digital converter hierarchy and provides an I2C-compatible digital interface alongside its precision analog front end. Differential inputs help reject common-mode noise when the signal source and converter share a common reference point. Key features include up to 18-bit resolution, two differential input channels, an integrated 2.048 V reference, and an input range of ±2.048 V. The device operates from 2.7 V to 5.5 V, supports a -40°C to 125°C temperature range, and is designed for low-noise measurement rather than high-speed waveform acquisition. Its 4 SPS rate suits temperature, pressure, load-cell, bridge-sensor, and slowly changing process measurements. The internal conversion architecture emphasizes resolution and noise performance instead of sampling rate. The onboard reference establishes a stable full-scale differential measurement window, while the differential input arrangement supports common-mode rejection when paired with appropriate input conditioning. I2C communication reduces the number of data connections needed to retrieve conversion results from a host controller. Typical applications include industrial pressure and temperature transmitters, strain-gauge and load-cell instrumentation, battery monitoring, laboratory measurement equipment, and precision analog sensor interfaces. Because the converter samples at up to 4 SPS, applications requiring waveform capture, audio bandwidth, or rapid transient analysis should select a faster ADC. For PCB implementation, place the reference and input-conditioning components close to the converter, keep analog and digital return paths controlled, and use a clean low-noise supply. Differential input filtering must preserve the required source impedance and settling behavior. Use the manufacturer pin-description table when assigning PCB tracks and verify the SOIC-8 footprint against the selected assembly variant. This product page combines manufacturer specifications, verified distributor availability, same-family drop-in candidates, comparison data, and practical PCB and signal-conditioning guidance to support faster component selection and design review.
MCP3423-E/MF - 18-Bit Dual-Channel Delta-Sigma ADC | Microchip
The Microchip Technology MCP3423-E/MF is an 18-bit, two-channel delta-sigma analog-to-digital converter with differential inputs, an I2C interface, and an integrated precision 2.048 V reference. It is offered in a 10-DFN 3x3 mm package and converts signals at up to 4 samples per second. The differential input range is ±2.048 V, while the programmable gain stage supports a 4.096 V full-scale range. These characteristics make the MCP3423-E/MF appropriate for precision instrumentation, industrial process measurement, and low-frequency sensor acquisition. A delta-sigma ADC is an analog-to-digital converter that uses oversampling, digital filtering, and noise shaping to produce high-resolution conversion results from low-frequency analog signals. It belongs to the ADC > analog-to-digital converter > data-converter IC > semiconductor hierarchy. Compared with flash and successive-approximation ADCs, this architecture is particularly effective when high resolution and good rejection of low-frequency noise matter more than very high sampling rates. The MCP3423-E/MF provides up to 18 bits of resolution across two analog input channels. Differential inputs support measurement of voltage differences, which is valuable when sensor outputs are referenced to a remote or noisy ground. The on-board 2.048 V precision reference establishes the converter's scale without requiring an external reference. Power-on reset and automatic calibration simplify initial system operation, while the 2.7 V to 5.5 V supply range supports both 3.3 V and 5 V systems. The converter uses a sigma-delta architecture and an I2C digital interface. Its 4 samples-per-second conversion capability is suitable for slowly changing industrial, environmental, and instrumentation signals rather than high-bandwidth waveform capture. The 10-DFN 3x3 mm package also reduces board footprint, although the exposed-pad construction and differential signal requirements demand careful layout and thermal design. Typical applications include 4-20 mA process-loop measurement, bridge-based pressure sensing, low-level voltage acquisition, environmental monitoring, and precision laboratory instrumentation. Differential excitation and conversion of the resulting small voltage difference can improve common-mode rejection. The 18-bit resolution is also useful when a sensor output represents only a small portion of the converter's differential input range. Designers should place input and reference-related connections for minimal signal-loop area, provide suitable bypass capacitance, and route the differential pair away from switching nodes. The package's compact thermal land pattern should be connected to the ground plane as directed by Microchip's package documentation. Because the verified product data identifies a 10-DFN package but does not provide its complete numbered pin map, the pinout is intentionally left null. This page combines verified manufacturer and distributor information with application guidance, purchasing context, and engineering-focused comparisons. It also distinguishes verified technical facts from attributes that still require confirmation from the complete Microchip datasheet before layout or production release.
MCP3423-E/UN - 18-Bit Dual Delta-Sigma ADC | Microchip
The Microchip Technology MCP3423-E/UN is a two-channel, 18-bit delta-sigma analog-to-digital converter with differential inputs, an I2C interface, and an integrated 2.048 V precision reference in a 10-MSOP package. The device supports input ranges up to ±2.048 V differentially and is specified in distributor listings for operation at up to 4 samples per second. An ADC is an analog-to-digital converter, a semiconductor that converts continuous voltage signals into digital codes for processing, measurement, logging, or control. The MCP3423 belongs to the delta-sigma ADC hierarchy, where an internal modulator and digital filtering provide high resolution and low noise at relatively low conversion rates. It is therefore suited to precision measurements rather than high-speed waveform capture. Key features include two analog input channels, up to 18-bit resolution, differential input capability, an on-board 2.048 V reference, and an I2C digital interface. The 2.048 V reference establishes the differential input scale for each conversion, while the dual-channel architecture allows related measurements to be captured without changing the converter package. The 10-MSOP format supports compact, surface-mount instrumentation designs. Technically, the MCP3423 combines a delta-sigma conversion stage with on-chip noise rejection and digital decimation. Low-rate conversion allows the converter to reject out-of-band noise effectively, while the integrated reference reduces the number of external precision components required. The I2C interface provides a compact connection to microcontrollers, sensors, data loggers, and industrial measurement equipment, although the maximum bus and interface timing details require confirmation from the manufacturer datasheet. Typical uses include bridge or load-cell signal acquisition, industrial process monitoring, low-frequency sensor measurement, laboratory instrumentation, and portable data acquisition. Differential inputs are particularly useful when the measured signal is small and a differential amplifier or low-level front end converts it into the converter's allowed input range. The device is not positioned as a high-speed SAR ADC because its listed conversion rate is approximately 4 SPS. Designers should verify analog input common-mode limits, reference accuracy, supply requirements, digital interface timing, and the required gain configuration against the manufacturer datasheet before layout. Input filtering and source impedance remain important because the selected conversion rate and digital filter determine the usable bandwidth; filtering too aggressively can delay settling, while insufficient filtering can admit unwanted out-of-band noise. This product page consolidates verified manufacturer and distributor information, pricing, package details, design guidance, and the available drop-in cross-reference. It is intended to help engineers identify the correct MCP3423-E/UN variant and distinguish a genuine same-package replacement from a merely similar converter.
MCP3423T-E/MF - 18-Bit Dual-Channel Sigma-Delta ADC | Microchip
The Microchip Technology MCP3423T-E/MF is an 18-bit, dual-channel sigma-delta analog-to-digital converter with differential inputs, an on-board 2.048 V reference, and an I2C serial interface in a 10-pin 3 x 3 mm DFN package. It supports differential input ranges of ±2.048 V and conversion rates up to 3.75 samples per second. A sigma-delta ADC is a class of analog-to-digital converter that uses continuous-time delta-sigma modulation and digital filtering to convert analog voltages into high-resolution digital codes. It belongs to the ADC and DAC category within data-converter ICs and is used when low noise, good linearity, and precise measurement matter more than very high conversion speed. The MCP3423 provides two differential measurement channels and up to 18 bits of resolution. Its internal 2.048 V reference simplifies system design by removing the need for an external precision reference in common bipolar-input applications. The two-wire I2C interface reduces the number of required signal lines, while 3.75 SPS conversion capability is suited to slow-changing industrial, environmental, and instrumentation signals. Its delta-sigma architecture inherently shapes quantization noise toward lower frequencies, helping reject broadband noise when the analog signal bandwidth is limited. The on-board reference and differential inputs are particularly useful for sensor bridges, pressure transducers, current measurements, and low-level instrumentation. Because the converter averages successive samples through digital filtering, input settling and filter behavior must be considered when measuring rapidly changing signals. Typical uses include industrial process monitoring, precision temperature measurement, bridge-sensor acquisition, laboratory instrumentation, and low-speed data-acquisition systems. The 3 x 3 mm DFN package supports compact designs but requires careful PCB layout, exposed-pad soldering, and low-noise routing. The MCP3423T-E/MF is packaged on tape and reel for automated manufacturing. For best results, use suitable filtering at each analog input, keep the I2C traces short, provide clean supply and ground connections, and follow the manufacturer datasheet's exposed-pad land pattern. Differential input measurements also require attention to common-mode voltage, source impedance, and conversion timing when calculating measurement uncertainty. This page combines the manufacturer's core device characteristics with practical analog-layout guidance, application analysis, and same-package replacement information. It highlights where the 18-bit resolution, differential architecture, 2.048 V reference, and 3.75 SPS rate make the MCP3423T-E/MF an effective precision-measurement ADC rather than a high-speed data-conversion solution.
MCP3423T-E/UN - 18-Bit Dual-Channel Delta-Sigma ADC | Microchip Technology
The Microchip Technology MCP3423T-E/UN is an 18-bit, dual-channel, low-noise delta-sigma analog-to-digital converter with differential inputs, an onboard 2.048 V precision reference, and an I²C-compatible serial interface. The device is specified for 3.3 V and 5 V operation and uses a 10-pin MSOP surface-mount package. Its two differential input channels provide flexible measurement of bipolar sensor signals while the onboard reference simplifies system design by removing the need for an external reference source. The MCP3423 is part of the MCP342X family of delta-sigma ADCs designed for precision signal acquisition. A delta-sigma ADC converts an analog input by oversampling and digital filtering, which is useful when the application requires high resolution and good noise performance at relatively low conversion rates. The MCP3423 supports up to 18 bits of resolution and conversion rates up to 240 SPS, according to the manufacturer product information. Key features include two differential channels, a 2.048 V onboard reference, automatic calibration, power-on reset, and a two-wire I²C-compatible interface. The differential input architecture helps reject common-mode noise when measuring low-level sensor outputs. The internal reference establishes a nominal differential input range of ±2.048 V, while the converter's low-noise architecture is intended for applications requiring accurate measurement of slowly changing analog quantities. The device uses an I²C-compatible serial interface to transfer conversion results to a microcontroller or other digital controller. Configuration registers control the conversion cycle, input channel selection, gain, and operating mode. Because the converter is designed for low-rate precision measurement rather than high-speed waveform capture, its conversion timing should be considered in applications where latency or dynamic signal bandwidth is important. Typical applications include pressure and temperature sensor interfaces, current sensing, bridge-transducer measurement, industrial process monitoring, and low-rate instrumentation. Differential inputs are particularly useful with resistive sensors whose outputs are referenced around a common midpoint. The internal reference is advantageous in compact systems where space, component count, and calibration complexity are constrained. When laying out the circuit, route the analog inputs away from digital switching nodes and keep the input connections short. The supply and ground pins require effective bypassing close to the device, and the exposed-pad or thermal considerations should follow the package-specific land pattern in the manufacturer datasheet. Verify the conversion time, gain, reference configuration, and I²C address before finalizing the firmware. This page also organizes the device specifications, replacement considerations, and application guidance for faster engineering evaluation.
MCP3424-E/SL - 18-Bit 4-Channel Delta-Sigma ADC | Microchip
Microchip Technology MCP3424-E/SL is an 18-bit, four-channel delta-sigma analog-to-digital converter with differential inputs, an onboard 2.048 V precision reference, and a 14-pin SOIC package. According to the manufacturer product page, the differential input range is ±2.048 V when the internal reference is used. The converter is intended for low-noise, high-accuracy measurement systems in which several analog channels must be digitized through a serial interface. An ADC is a mixed-signal integrated circuit that converts continuous analog voltage into a digital code. The MCP3424 belongs to the delta-sigma ADC category, which uses noise shaping and digital filtering to obtain high resolution from relatively slow conversion rates. It sits within the broader semiconductor hierarchy as an ADC, data-converter IC, analog-to-digital converter, and signal-acquisition component. Its four-channel architecture is useful when monitoring several differential sensors or precision analog front ends. The MCP3424-E/SL provides up to 18 bits of resolution and supports four analog input channels. Its low-noise, high-accuracy delta-sigma architecture is suited to instrumentation where small voltage changes must be measured reliably. The onboard 2.048 V reference provides a defined differential measurement range of ±2.048 V without requiring an external reference source. The 14-pin SOIC package also supports conventional surface-mount PCB assembly. MCP3424 devices use a continuous or single-conversion delta-sigma architecture intended for precision rather than high-speed waveform capture. The verified distributor listing identifies the MCP3424 family as a 1 sigma-delta converter, while another listing identifies a 3.75 SPS operating rate. Conversion speed, noise performance, input impedance, digital interface details, supply requirements, and absolute maximum ratings should be confirmed against the manufacturer datasheet before final design release. Typical measurement uses include bridge or differential sensor instrumentation, industrial process monitoring, laboratory data acquisition, low-frequency precision acquisition, and multi-channel embedded measurement. In each case, the converter can digitize more than one analog input while preserving a compact package. System designers should account for the input settling behavior and digital filtering delay when planning sample timing or synchronizing the conversion result with external sensors. A key design consideration is the relationship between the selected reference and the analog input range. With the internal 2.048 V reference, the verified differential range is ±2.048 V. A PCB design should preserve signal integrity at the analog inputs, provide a low-noise analog ground path, and account for the converter's serial communication requirements. An external reference or additional filtering should be used only after its range, accuracy, and noise implications have been verified from the manufacturer datasheet. This product record combines verified manufacturer and distributor information with practical selection guidance, application context, and an explicit distinction between confirmed specifications and data still required for design-in. It also documents that no additional pin-to-pin drop-in alternatives were established by the supplied cross-reference evidence, avoiding unsupported replacement claims.
MCP3424-E/ST - 18-Bit Quad-Channel Delta-Sigma ADC | Microchip Technology
Microchip Technology MCP3424-E/ST is an 18-bit, four-channel delta-sigma analog-to-digital converter with differential inputs, an integrated precision 2.048 V reference, and a two-wire I2C-compatible serial interface. The device is supplied in a 14-TSSOP package and operates from a single supply voltage ranging from 2.7 V to 5.5 V. Its low-noise, high-accuracy architecture is intended for measurement systems that require more than 16-bit resolution but can tolerate a conversion rate of approximately 3.75 samples per second. A delta-sigma ADC is a sigma-delta analog-to-digital converter that uses oversampling, noise shaping, and digital filtering to convert a differential analog input into a high-resolution digital code. In the signal-chain hierarchy, the MCP3424-E/ST is an ADC, specifically a low-frequency precision delta-sigma ADC within the broader data-converter and semiconductor categories. Its differential input architecture helps reject common-mode noise when paired with suitable sensor and instrumentation amplifiers. The MCP3424 family provides up to 18-bit resolution, four input channels, a low-noise architecture, and an onboard 2.048 V precision reference that enables a differential input range of ±2.048 V according to the manufacturer product information. The I2C-compatible interface allows the converter to connect efficiently to embedded controllers while consuming relatively few external pins. The 14-TSSOP package also makes the device suitable for compact instrumentation equipment. Typical uses include pressure and temperature acquisition, industrial process monitoring, laboratory measurement, portable instrumentation, and sensor interfaces where low-frequency measurements are more important than high conversion speed. The differential inputs and integrated reference help simplify analog front-end design while preserving measurement resolution. The 2.7 V to 5.5 V operating range supports both 3.3 V and 5 V systems. When designing around the MCP3424-E/ST, confirm the analog input range, common-mode limits, reference configuration, digital interface voltage, and conversion timing against the manufacturer datasheet. Place input filtering and decoupling close to the device, and account for the 3.75 SPS conversion rate when defining sample timing. This page combines verified distributor information, manufacturer details, package information, practical application guidance, and clearly qualified replacement options.
MCP3426A0-E/MC - 16-Bit Dual-Channel ADC | Microchip Technology
Microchip Technology MCP3426A0-E/MC is a 16-bit, dual-channel, low-noise delta-sigma analog-to-digital converter with differential inputs, 15 samples per second, and an 8-lead DFN package measuring 2 x 3 mm. It includes an onboard precision 2.048 V reference, supports a differential input range of ±2.048 V, and uses a two-wire I2C-compatible serial interface. A delta-sigma ADC is a voltage-to-digital conversion IC that averages successive samples and applies digital filtering to produce a high-resolution result from low-frequency analog signals. The MCP3426 belongs to the broader hierarchy of data-converter ICs, analog-to-digital converters, signal-chain semiconductors, and general-purpose mixed-signal devices. Its differential architecture is especially useful when the source has a small differential signal riding on a larger common-mode voltage. The device provides up to 16 bits of resolution, two differential input channels, a 2.048 V internal reference, and an I2C-compatible interface. The A0 device designation identifies the specific gain and conversion-timing configuration within the MCP3426 family. Operation from a single supply of 2.7 V to 5.5 V allows the converter to operate from common 3.3 V and 5 V systems. The low-noise conversion architecture is appropriate for precision measurement rather than high-speed waveform acquisition. Delta-sigma conversion favors low-frequency signals because its digital filter improves noise performance but limits effective sampling bandwidth. The MCP3426 family is designed around continuous conversion, where internal oversampling and filtering determine output speed and noise. Differential inputs reduce sensitivity to common-mode disturbances when the source impedance at both inputs is closely matched. The internal reference simplifies ratiometric or absolute measurements by removing the need for an external reference circuit in many applications. Typical uses include current sensing, temperature measurement, bridge-transducer instrumentation, pressure monitoring, and low-level voltage acquisition. The onboard reference and differential inputs are particularly useful when a sensor produces a small voltage across a shunt or bridge. Because the MCP3426 is not intended for high-frequency signal capture, applications requiring kilohertz or megahertz bandwidth should use a faster converter architecture. For PCB implementation, place input, reference, and bypass capacitors close to their associated pins and route the two differential inputs as a compact, balanced pair. Keep the exposed pad connected to the ground plane and follow the manufacturer’s land-pattern and thermal-via guidance. Confirm the programmed conversion rate, gain, and output-code interpretation against the MCP3426/7/8 datasheet before scaling the analog input. This product page combines the manufacturer’s electrical specifications, package and interface details, family-level alternatives, and practical design guidance. It also distinguishes the MCP3426A0-E/MC from conversions that use different package formats or faster ADC architectures, helping engineers confirm drop-in suitability before redesigning an analog measurement board.
MCP3426A0-E/MS - 16-Bit Dual-Channel ADC | Microchip Technology
The Microchip Technology MCP3426A0-E/MS is a 16-bit, dual-channel, delta-sigma analog-to-digital converter with differential inputs, an I2C interface, and an 8-pin MSOP package. It supports conversion rates up to 15 samples per second and includes an onboard 2.048 V precision reference, enabling a differential input range of ±2.048 V. The device operates across the -40°C to +125°C temperature range. A delta-sigma ADC is a type of analog-to-digital converter that uses oversampling and digital filtering to achieve high resolution from low-noise sensor signals. It belongs to the data-converter IC hierarchy alongside SAR and pipelined converters. Compared with a successive-approximation-register ADC, the MCP3426 architecture is especially useful when low-noise measurement, averaging, and limited conversion speed are more important than rapid transient capture. The MCP3426 provides two differential input channels, 16-bit resolution, and conversion rates up to 15 SPS. Its integrated 2.048 V reference reduces external reference circuitry and supports a stated differential range of ±2.048 V. The I2C interface supports digital communication with a microcontroller, embedded controller, or data-acquisition system, while the 8-pin MSOP package supports compact surface-mount designs. The conversion speed of 15 SPS makes this converter appropriate for slowly changing measurements rather than high-frequency waveform sampling. Its delta-sigma filtering can suppress out-of-band noise, but the analog inputs must still be conditioned to prevent overload, settling errors, or common-mode voltage from exceeding the device limits. Differential operation helps reject common-mode interference when the source is arranged around a biased midpoint. Typical uses include battery-cell monitoring, pressure and temperature measurement, industrial process instrumentation, environmental sensors, portable instrumentation, and low-rate data acquisition. Differential inputs are particularly useful for bridge sensors and current-sense systems where signal polarity may change around zero and rejecting common-mode noise improves measurement integrity. Careful layout is essential for precision conversion. Keep analog input traces short, connect the reference and ground pins according to the manufacturer pin-description and layout guidance, and place input filtering capacitors close to their associated pins. Confirm the external I2C pull-up values and the programmed gain, conversion rate, and I2C address before production release. This product summary combines the manufacturer's device description, distributor package and feature data, pin-compatible family options, and practical design guidance. It also distinguishes confirmed operating facts from parameters that require engineering review against the full manufacturer datasheet.
MCP3426A0-E/SN - 16-Bit Dual-Channel ADC | Microchip
The Microchip Technology MCP3426A0-E/SN is a 16-bit, two-channel, delta-sigma analog-to-digital converter with differential inputs, a 2.048 V internal precision reference, and a 15 SPS conversion rate, packaged in an 8-pin SOIC. It operates from a single 2.7 V to 5.5 V supply and communicates through a two-wire I2C-compatible serial interface. An ADC is a data-acquisition IC that converts continuously varying analog voltages into digital values for measurement, control, or display. The MCP3426 belongs to the delta-sigma ADC family within the broader data-converter and signal-processing hierarchy. Its differential architecture measures the voltage difference between two inputs rather than referencing a single node to ground, which helps reject common-mode noise when sensors and measurement circuitry share an analog environment. The principal features are 16-bit conversion resolution, two differential input channels, a precision 2.048 V onboard reference, and a differential input range of plus or minus 2.048 V. These characteristics suit low-frequency measurements requiring stable readings rather than high-speed waveform capture. The I2C-compatible interface also reduces the number of signal lines needed when the converter shares a control bus with other microcontrollers or embedded systems. The delta-sigma architecture incorporates noise shaping to move quantization noise away from the lower-frequency portion of the measurement bandwidth. The onboard reference establishes the converter's voltage scale, while differential inputs can support sensor bridges, current-shunt measurements, and other signals whose useful information is represented as the difference between two nodes. The device is identified as an automotive AEC-Q100 part in distributor technical listings, making the temperature-qualified option relevant to vehicle and other demanding industrial environments. Typical uses include industrial process monitoring, environmental sensors, strain-gauge and bridge-based measurements, current sensing, laboratory instrumentation, and low-speed data acquisition. It is less appropriate for audio-band waveform sampling, motor-control feedback loops, or other applications that require conversions faster than the specified 15 SPS rate. Firmware must also allow sufficient settling time between requested conversions when sequential measurements are used. PCB layout should keep the analog inputs short, isolate them from switching-node currents, and follow the pin-description table in the manufacturer datasheet when assigning tracks. The I2C pull-up resistors should be sized for the bus voltage and total capacitance rather than the logic voltage alone. Differential input routing with closely matched geometry improves rejection of externally coupled noise and helps preserve the converter's full measurement performance.
MCP3426A0T-E/SN - 16-Bit Delta-Sigma ADC, Dual Ch, 15SPS | Microchip
The Microchip Technology MCP3426A0T-E/SN is a 16-bit, dual-channel, low-noise delta-sigma analog-to-digital converter with differential inputs, an on-board 2.048 V precision reference, and an I2C (two-wire) interface, supplied in an 8-pin SOIC package. According to the MCP3426/7/8 datasheet (Microchip document 22226A), the device provides a maximum output sample rate of 15 SPS at 16-bit resolution, an input range of ±2.048 V differentially, and operates from a single 2.7 V to 5.5 V supply. The 'A0' suffix denotes the fixed I2C address option and the 'T' indicates Tape and Reel packaging. A delta-sigma ADC (also written ΔΣ or sigma-delta ADC) is a type of oversampling converter that uses a modulator and digital filtering to achieve high resolution and excellent noise rejection, especially at low bandwidths. Within the broader signal-chain hierarchy, the MCP3426 belongs to the data-acquisition IC category -> analog-to-digital converter -> precision delta-sigma ADC -> low-power sensor ADC. Its on-chip reference and PGA eliminate most external components, simplifying designs that previously required a standalone ADC plus an external voltage reference. Key features include a programmable gain amplifier (PGA) with gains of 1, 2, 4, or 8, an internal 2.048 V reference with ±0.05% typical initial accuracy, 16-bit noise-free resolution, an I2C interface with user-configurable addresses, and an operating current of approximately 145 µA at 3 V during continuous conversion. The on-chip calibration register supports offset and gain self-calibration, which is useful for ratiometric measurements and sensor drift compensation. The architecture uses a second-order charge-balancing modulator and an SINC1 digital filter, which trades off settling time against noise. At the lowest data rate of 15 SPS the device achieves true 16-bit noise-free performance, while at the highest 240 SPS rate it switches to 12-bit effective resolution, making it well suited to multi-rate acquisition strategies. Typical applications include direct digitization of thermocouples, RTDs, bridge pressure sensors, strain gauges, and battery-cell voltage monitors. The differential ±2.048 V input range accommodates most low-voltage analog sensors without additional signal conditioning. When designing with the MCP3426, the I2C pull-up resistors must be sized correctly for the selected VDD and bus speed, and an external 0.1 µF decoupling capacitor placed close to the VDD pin is mandatory. Designers should also remember that the same address option 'A0' cannot co-exist on a single I2C bus with another A0 device; the A1, A2, or A3 address options must be selected for multi-channel systems. This page synthesizes distributor pricing, drop-in alternatives drawn from the same MCP3426 family, and practical design notes that go beyond the manufacturer datasheet's typical-application section.
MCP3426A1-E/MC - 16-Bit Dual-Channel ADC | Microchip
The Microchip MCP3426A1-E/MC is a 16-bit, dual-channel, delta-sigma analog-to-digital converter with differential inputs, up to 240 samples per second, an on-board 2.048 V reference, and an 8-DFN 2 x 3 mm package. It uses a two-wire I2C interface for digital communication and supports analog measurement of two independent input pairs. The converter architecture is intended for low-noise, high-accuracy signal acquisition where compactness and low power are important. A delta-sigma ADC is a type of analog-to-digital converter that oversamples and digitally filters its input before conversion. Within the ADC hierarchy, it belongs to the delta-sigma modulator and digital-decimation-filter architecture. The MCP3426A1-E/MC combines this conversion technique with an integrated precision reference and differential input architecture, making it suitable for sensors, industrial measurement systems, and low-level analog front ends. The device provides up to 16 bits of resolution, two analog input channels, and a differential input range of ±2.048 V when referenced to the internal 2.048 V source. Its 240 SPS conversion rate supports continuous monitoring without the data rate associated with high-speed flash ADCs. The I2C interface reduces the required connection count compared with parallel converters, while the 8-DFN package supports compact, surface-mount PCB layouts. Microchip describes the MCP3426 as a low-noise, high-accuracy converter family that combines differential analog inputs with an on-board precision reference. Differential operation rejects common-mode voltage and can improve measurement accuracy when the source is balanced around the converter’s common-mode voltage. The internal reference establishes a fixed, predictable conversion scale, reducing the number of external precision components required for basic bridge, sensor, and process-control measurements. Typical uses include industrial pressure and temperature acquisition, current-shunt measurement, potentiometer and bridge-sensor conditioning, laboratory instrumentation, and low-frequency environmental monitoring. Differential inputs are particularly useful when the measured signal is small relative to the common-mode voltage. The 240 SPS rate is appropriate for changing process variables rather than high-bandwidth waveform capture. For reliable operation, route analog inputs away from switching nodes, use a quiet ground reference, and follow the manufacturer’s recommended input and bypass-capacitor connections. Differential pairs should be routed with consistent geometry and geometry to minimize conversion error. The 8-DFN exposed pad also requires the recommended PCB land pattern and thermal-via arrangement to avoid assembly and thermal problems. This page combines the manufacturer’s converter specifications with package guidance, application-focused design notes, and a comparison of same-family address variants. It helps engineers evaluate interface compatibility, analog range, conversion rate, and replacement options before committing a compact two-channel measurement design to PCB fabrication.
MCP3426A1-E/MS - 16-Bit Dual-Channel Delta-Sigma ADC | Microchip
The Microchip Technology MCP3426A1-E/MS is a 16-bit, dual-channel, delta-sigma analog-to-digital converter with differential inputs, 15 SPS conversion performance, and an 8-pin MSOP package. It operates from 2.7 V to 5.5 V and includes an onboard precision 2.048 V reference, making it suitable for low-level differential sensor measurements and industrial instrumentation. A delta-sigma ADC is a sigma-delta analog-to-digital converter that uses oversampling and digital filtering to provide high resolution and excellent noise performance. The MCP3426A1 belongs to the broader ADC → data converter → analog signal-processing IC hierarchy and is designed for measurements where low noise, differential input handling, and relatively low conversion rates are more important than very high throughput. Key features include 16-bit resolution, two differential input channels, single-supply operation from 2.7 V to 5.5 V, and conversion rates up to 15 SPS. The integrated 2.048 V reference supports a differential input range of ±2.048 V. The device is packaged in an 8-pin MSOP, and the automotive-grade ordering code identifies the temperature-grade and qualification option associated with the manufacturer’s device family. The MCP3426 architecture converts analog differential voltages through a delta-sigma modulator followed by digital filtering. This filtering averages noise over the measurement bandwidth and rejects periodic interference more effectively than many successive-approximation converters. The trade-off is conversion latency and reduced throughput, which make the device most appropriate for temperature, pressure, strain-gauge, current, and slowly changing industrial signals rather than waveform or motion acquisition. Typical applications include bridge-based pressure and load-cell measurements, low-voltage current sensing, thermocouple and RTD conditioning, battery monitoring, and industrial process-control inputs. In each case, the differential inputs help reject common-mode noise when the sensor is connected through wiring that may pick up unwanted voltage. The 16-bit resolution improves the representation of small sensor outputs without requiring a faster converter. For PCB implementation, keep the analog input traces short and route them away from switching power nodes and digital control lines. Use a clean, low-noise reference and adequate decoupling close to the supply pins. Because differential-input signal integrity depends on matched routing and filtering, the input source impedance and the acquisition timing should be checked against the manufacturer’s guidance before choosing external input networks. This page combines the MCP3426A1-E/MS specifications with practical ADC design guidance, application-oriented interpretation, and same-package upgrade options. It is intended to help engineers evaluate the converter’s resolution, bandwidth, reference, supply range, package, and migration options before releasing a design.
MCP3426A1-E/SN - 16-Bit Dual-Channel ADC | Microchip
Microchip Technology MCP3426A1-E/SN is a two-channel, 16-bit delta-sigma analog-to-digital converter with differential inputs, an operating supply range of 2.7 V to 5.5 V, a conversion rate of 15 samples per second, and an 8-pin SOIC package. Its integrated precision reference is 2.048 V, supporting a differential input range of ±2.048 V. A delta-sigma analog-to-digital converter is an ADC category that uses delta-sigma modulation and digital filtering to convert analog voltage into high-resolution digital codes. The MCP3426 belongs to the ADC → delta-sigma ADC → data-converter IC hierarchy. It is designed for precision measurement systems where differential inputs, low noise, accurate conversion, and a simple I2C interface are more important than very high sampling speed. Key features include two differential analog input channels, resolution of up to 16 bits, and a 15 Hz conversion rate. The integrated 2.048 V reference removes the need for an external reference source, while the differential inputs help reject common-mode noise when sensing small signals. The device operates from 2.7 V to 5.5 V and communicates through I2C, making it suitable for embedded measurement systems with a microcontroller or sensor hub. The MCP3426 family combines a low-noise, high-accuracy delta-sigma conversion stage with an internal precision reference and programmable conversion and gain behavior. The A1 device variant uses a factory-programmed I2C address, allowing deterministic bus addressing without external address straps. Differential input architecture also supports ratiometric or referenced sensor measurements when both input nodes are driven from the same excitation source. Typical uses include industrial process measurement, battery-powered environmental sensing, strain-gauge instrumentation, pressure-sensor interfaces, and low-speed data acquisition. Its 15 Hz conversion rate is well suited to slowly changing physical variables rather than waveform capture or high-bandwidth communications. The two channels can also be configured for single-ended operation when the application does not require a fully differential signal path. For PCB design, keep analog input traces short and place the input bypass components close to their associated pins. Provide clean return paths beneath the analog section and isolate the I2C routing from sensitive input nodes. The ADC must also be evaluated for gain, common-mode range, input filtering, reference accuracy, and system noise before the conversion output is interpreted as a precision measurement.
MCP3426A2-E/MC - 16-Bit Dual-Channel Delta-Sigma ADC
The Microchip Technology MCP3426A2-E/MC is a dual-channel, 16-bit delta-sigma analog-to-digital converter with differential inputs, an on-board 2.048 V precision reference, and a two-wire I2C interface. It is housed in an 8-pin DFN exposed-pad package measuring 2 x 3 mm and is specified for 3.3 V and 5 V systems. The converter supports conversion rates up to 240 SPS for single measurements and 15 SPS in continuous operation according to the family documentation. A delta-sigma ADC is a type of analog-to-digital converter that uses oversampling, noise shaping, and digital filtering to convert a differential analog input into a high-resolution digital code. Within the electronics hierarchy, the MCP3426 belongs to the ADC class, the analog-to-digital converter category, and the broader data-converter and semiconductor families. Its differential inputs and integrated reference make it suitable for low-level instrumentation where signal polarity and measurement accuracy are important. The MCP3426A2-E/MC provides two analog input channels, up to 16-bit resolution, and a differential input range of ±2.048 V when using the internal 2.048 V reference. This 4096 mV differential span allows both positive and negative input voltages to be represented without separate single-ended conversion stages. Two-wire communication reduces the number of interface pins required on compact sensor, industrial, and automotive measurement boards. The delta-sigma architecture prioritizes low noise and high accuracy rather than the highest continuous conversion rate. Single-conversion operation supports rates up to 240 SPS, while continuous conversion is identified as operating at 15 SPS. A dual-channel implementation can reduce the number of separate converters required when two related sensors must be digitized, although channel multiplexing and acquisition timing should be checked in the system design. Typical uses include bridge and strain-gauge measurements, battery-cell monitoring, current sensing, industrial process control, portable instrumentation, and automotive sensor acquisition. Differential input architecture helps reject common-mode noise when the sensor output is referenced to a local return rather than the converter ground. The small exposed-pad DFN package also supports compact PCB layouts, but its exposed thermal pad must be connected according to the manufacturer land pattern. For a robust layout, route the analog inputs away from digital clocks and switching power nodes, place input filtering components close to the ADC pins, and use a quiet ground reference for the measurement path. Verify the acquisition timing, conversion-rate mode, digital filter settling time, and I2C clock timing before choosing the operating mode. The exposed pad should be connected to the appropriate ground plane to improve thermal performance and reduce package-related stress. This product overview combines the manufacturer’s device specifications with practical guidance for PCB layout, signal conditioning, differential measurement, and source selection. It also organizes compatible same-family options and their factory-programmed I2C-address differences, helping engineers identify the correct replacement before committing a PCB revision.
MCP3426A2-E/MS - 16-Bit Dual-Channel Sigma-Delta ADC
The Microchip Technology MCP3426A2-E/MS is a 16-bit, dual-channel, sigma-delta analog-to-digital converter with differential inputs, up to 15 samples per second, and an 8-MSOP package. It uses an onboard precision 2.048 V reference to provide a differential input range of ±2.048 V. The converter is designed for low-noise, high-accuracy measurement of relatively slow analog signals. An ADC converts continuous analog voltage into a numerical value for processing, storage, or control. The MCP3426 belongs to the sigma-delta ADC category, where an internal modulator and digital filter shape the conversion process to provide strong noise rejection and high resolution without requiring a high-speed flash converter. Within the component hierarchy, it is a data-converter IC, an ADC, and a power-management-compatible peripheral for precision measurement systems. The MCP3426 combines two differential input channels, 16-bit resolution, and a factory-programmed I2C address in a compact 8-MSOP package. Differential inputs help reject common-mode disturbance when the measured voltage is small relative to the reference or supply level. The 2.048 V precision reference establishes the conversion scale, while the dual-channel architecture supports measurements from two sensors without changing converter hardware. Its sigma-delta architecture is most effective with low-frequency or slowly changing signals because the conversion rate is limited to 15 samples per second. Digital filtering suppresses broadband noise but requires suitable sampling and settling behavior in the acquisition chain. The converter resolves its programmed gain, reference, and conversion settings through an I2C-compatible interface, allowing firmware to configure measurement channels and retrieve conversion results. Typical uses include battery-powered environmental monitoring, industrial pressure and temperature acquisition, laboratory instrumentation, and low-speed sensor interfaces. Two differential channels are useful when both the sensor output and its return or reference signal must be measured accurately. The part is also appropriate for portable equipment where low conversion speed is acceptable but resolution and noise performance are more important than high throughput. PCB design should place input filtering and reference-decoupling components close to the associated pins, while keeping sensitive analog traces away from digital switching nodes. Differential routing should be compact and symmetric where practical. Designers should confirm the actual input range, gain configuration, acquisition timing, and absolute maximum conditions in the manufacturer datasheet before setting the analog front end. This page combines the core MCP3426 electrical characteristics, verified package information, same-footprint address-option alternatives, application guidance, and design considerations into a procurement-oriented engineering reference. It also distinguishes true drop-in options from cross-package converters so that footprint and firmware changes are considered before redesign.
MCP3426A2-E/SN - 16-Bit Dual-Channel ADC | Microchip
Microchip Technology MCP3426A2-E/SN is a 16-bit, dual-channel delta-sigma analog-to-digital converter with differential inputs, up to 15 samples per second, and an 8-pin SOIC package. It includes an onboard 2.048 V precision reference, allowing a differential input range of ±2.048 V. The A2 gain configuration provides useful sensitivity for low-level differential signals while retaining the resolution and noise performance associated with the MCP3426 family. A delta-sigma ADC is an analog-to-digital converter category that uses continuous-time delta-sigma modulation and digital filtering to produce high-resolution conversion results. Within the semiconductor hierarchy, the MCP3426A2-E/SN is an ADC, then a data-converter IC, then an integrated circuit and semiconductor. Its internal reference, differential input architecture, and I2C-oriented interface make it suitable for sensors and measurement systems where analog signals must be converted into digital data for processing by a microcontroller or embedded controller. The converter offers up to 16-bit resolution, two differential input channels, and conversion rates up to 15 SPS. Its differential input arrangement helps reject common-mode noise when the sensor and analog front end share a suitable ground reference. The internal 2.048 V reference reduces the number of external precision components required, while the gain selection determines the effective full-scale input range. The -40°C to +125°C operating range supports industrial, instrumentation, and automotive-oriented equipment. The MCP3426 belongs to the low-noise, high-accuracy MCP342X converter family, which includes the MCP3426, MCP3427, and MCP3428. MCP3426 is the two-channel member, while MCP3427 and MCP3428 provide one- and four-channel configurations respectively. The MCP3426 family combines a delta-sigma conversion core with an onboard reference and serial digital interface, making it practical for current monitoring, bridge-sensor measurement, portable instrumentation, and low-rate precision data acquisition. Typical uses include battery-cell monitoring, industrial pressure and temperature acquisition, potentiometer and sensor interfaces, and low-frequency process-control measurements. Differential inputs suit Wheatstone-bridge sensors because the converter measures the small voltage between two sensor terminals rather than the larger common-mode voltage. The 15 SPS maximum rate is suitable for slow-changing measurements rather than high-speed waveform acquisition. Design the analog input network so that common-mode voltage and differential signal amplitude remain inside the converter's operating limits. Place input filtering and protection components close to the corresponding pins, maintain a low-noise ground path, and decouple the supply close to VDD. When replacing an earlier gain option, verify the selected full-scale range, input impedance, and noise behavior against the source impedance rather than relying only on package compatibility. This product page combines the manufacturer's device characteristics, exact-package sourcing information, family-level alternatives, application guidance, and PCB-level implementation notes to help engineers evaluate the MCP3426A2-E/SN before integrating a dual-channel 16-bit delta-sigma ADC.
MCP3426A3-E/MC - 16-Bit 2-Channel Sigma-Delta ADC | Microchip
The Microchip Technology MCP3426A3-E/MC is a 16-bit, 2-channel sigma-delta analog-to-digital converter (ADC) with a conversion rate of up to 15 samples per second, housed in an 8-DFN (2 x 3 mm) package. The device is designed for low-speed precision measurement systems where dual analog inputs must be converted into high-resolution digital values for sensor monitoring, process control, instrumentation, and industrial data acquisition. An ADC converts continuous analog voltage signals into digital data that a microcontroller, DSP, or embedded control system can process. The MCP3426 belongs to the sigma-delta ADC family, which uses continuous-time oversampling and digital filtering to achieve high resolution from a compact converter. In the MCP3426, the two differential input channels give designers a way to measure two independent or related sensor outputs while preserving a compact, low-pin-count footprint. The MCP3426A3-E/MC operates from 2.7 V to 5.5 V, supports an operating temperature range of -55 C to +125 C, and is specified as a 16-bit converter with a 15 SPS conversion rate. Its sigma-delta architecture is appropriate for slow-changing signals such as temperature, pressure, load-cell, potentiometer, and bridge-sensor outputs rather than high-bandwidth waveform acquisition. The 8-DFN package makes the converter suitable for compact industrial and embedded boards. Because the package has a small exposed-pad arrangement and no-lead construction, PCB layout should follow the manufacturer land pattern and thermal recommendations exactly. Adequate input filtering, reference stability, and grounding are important when the ADC is used with low-level sensor signals. Typical applications include two-channel process instrumentation, industrial sensor interfaces, portable measurement systems, and control boards that require high-resolution conversion at low throughput. The 15 SPS rate provides a useful balance between resolution and conversion speed for thermal, pressure, and resistive-sensor measurements. When selecting this device, verify the channel configuration, differential input range, reference voltage, conversion timing, and package land pattern against the manufacturer datasheet. Use the manufacturer pin-description table when assigning PCB tracks, and confirm the exposed-pad connection and thermal-via layout for reliable operation across the extended temperature range.
MCP3426A3-E/MS - 16-Bit Dual-Channel ADC | Microchip
The Microchip Technology MCP3426A3-E/MS is a 16-bit, dual-input sigma-delta analog-to-digital converter operating at 15 samples per second, housed in an 8-MSOP package. Its digital supply range is 2.7 V to 5.5 V, and its operating temperature range is -40 °C to +125 °C. An analog-to-digital converter, or ADC, converts an analog input voltage into a digital value that a microcontroller, embedded controller, or data-acquisition system can process. The MCP3426 belongs to the sigma-delta ADC family, where the analog input is continuously sampled and converted through delta-sigma modulation and digital filtering. This architecture is commonly used for relatively slow, precision-oriented measurements that do not require high-frequency sampling. The MCP3426A3-E/MS combines a 16-bit conversion resolution with two analog input channels and a 15 sps conversion rate. This operating point is suited to slowly varying sensor signals where high resolution and noise-limited measurement are more important than rapid sampling. Operation from a 2.7 V to 5.5 V digital supply supports both 3.3 V and 5 V system architectures, while the industrial temperature rating allows deployment across a broad range of ambient conditions. The device uses a sigma-delta conversion architecture that separates analog measurement from digital filtering. In a typical circuit, external analog components condition each input before it reaches the converter, while a microcontroller reads the converted result through a serial interface. The -40 °C to +125 °C operating range and 8-MSOP surface-mount construction make the device suitable for compact industrial, instrumentation, and embedded measurement systems. Typical uses include temperature monitoring, pressure and strain-sensor acquisition, potentiometer position measurement, and low-frequency process-control inputs. These applications benefit from the 16-bit resolution when the measured signal changes slowly and system noise has been controlled through shielding, grounding, filtering, and careful PCB layout. The principal design consideration is the relationship between input accuracy, analog reference quality, and the conversion cycle. The 15 sps rate should be matched to the physical signal bandwidth; oversampling a fast or noisy signal cannot recover information that the input network has already filtered out. Reference and supply bypassing must also be placed close to the device pins. This product page combines the MCP3426A3-E/MS electrical characteristics, package information, pricing references, same-family drop-in alternatives, and application-focused engineering guidance to support component selection, PCB planning, and BOM qualification.
MCP3426A3-E/SN - 16-Bit Dual-Channel ADC | Microchip
The Microchip Technology MCP3426A3-E/SN is a 16-bit, dual-channel, sigma-delta analog-to-digital converter with a conversion rate of 15 samples per second, housed in an 8-pin SOIC package. Its two-input architecture allows simultaneous monitoring of two analog channels, while the 16-bit resolution supports precision measurement of low-level sensor and instrumentation signals. An ADC is a data-converter IC that transforms an analog voltage into a digital value for processing, measurement, or communication. The MCP3426 belongs to the sigma-delta ADC family, where internal oversampling and digital filtering are used to obtain high resolution. In the system hierarchy, it is an analog-to-digital converter, then a data-converter IC, and finally a semiconductor used to connect analog sensors to digital control or data-acquisition systems. The primary features are 16-bit resolution, two analog inputs, a 15 samples-per-second conversion rate, and an 8-pin SOIC package. The dual-input format reduces the need for a separate converter when a system must monitor two related quantities. The relatively deliberate sampling rate is appropriate for slow-changing process, environmental, and sensor signals rather than high-frequency waveform acquisition. The sigma-delta architecture is suited to precision dc measurements because digital filtering helps suppress out-of-band noise and averages successive conversions. The usable common-mode range, input bias behavior, internal reference accuracy, and noise performance must be checked against the exact manufacturer datasheet before defining the analog front end. A3 identifies the converter gain configuration, which determines the input scaling for the application. Typical uses include battery-powered environmental sensing, industrial pressure and temperature monitoring, laboratory instrument inputs, and low-speed data acquisition. In each case, the MCP3426A3-E/SN can digitize two slow analog inputs while an embedded controller reads the results over a serial interface. Attention to source impedance and filtering is particularly important when measuring sensors that generate small differential or single-ended signals. The PCB design should place input filtering and protection close to the converter, provide a quiet reference and supply arrangement, and keep digital interface traces away from sensitive analog nodes. Before production release, verify the supported input range, differential versus single-ended configuration, electrical limits, and startup behavior in the manufacturer datasheet for the exact suffix and package.