ADC/DAC
بەرهەمەکان (3,600+)
MCP3304-BI/SL - 13-Bit 4-Channel SPI ADC | Microchip
The Microchip Technology MCP3304-BI/SL is a 13-bit, four-channel, differential-input successive-approximation analog-to-digital converter with an SPI serial interface, packaged in a 16-pin SOIC. It supports a 100 ksps conversion rate and a 2.7 V operating supply, making it suitable for precision battery-powered measurement, industrial instrumentation, and remote data-acquisition systems. An ADC converts continuous analog voltages into digital values for processing, storage, or transmission. The MCP3304 belongs to the successive-approximation ADC family and uses a comparator, internal DAC, and sampling network to determine each converted result. Its differential inputs support two differential channels or four single-ended channels, allowing it to reject common-mode noise when the source is arranged around a biased reference. Key features include 13-bit resolution, four analog input channels, a 100 ksps sampling rate, and an industry-standard SPI serial interface. Differential input capability is especially useful for bridge sensors, current measurements, and low-level signals referenced to a midpoint voltage. The 2.7 V minimum operating voltage supports low-power designs, while the converter's low-power characteristics suit portable and remote systems. The SPI interface provides a straightforward connection to microcontrollers, sensors, and programmable logic. Conversion results are represented as digital words, while the analog front end performs sampling and successive approximation. Because the device is specified for a 100 ksps conversion rate, system timing should account for acquisition, conversion, and serial transfer intervals rather than treating the conversion rate as complete transaction throughput. Typical uses include battery-powered environmental monitoring, industrial process measurement, remote sensor nodes, laboratory data acquisition, and low-level analog signal conditioning. The four-channel arrangement reduces the need for multiple converters when several related sensors must be measured. Differential operation can also improve immunity to common-mode disturbances when both input conductors share similar noise. Design the input network to keep source impedance and settling behavior compatible with the selected acquisition system. Provide a clean reference voltage, route analog and digital return currents carefully, and use the manufacturer's pin-description table when assigning PCB tracks. The 16-pin SOIC package supports conventional surface-mount assembly, but analog trace routing and reference decoupling remain more important for measurement accuracy than package density alone. This page combines the manufacturer product information, distributor listings, cross-reference results, practical interface guidance, and a focused comparison of documented alternatives. It is designed to help engineers identify whether the MCP3304-BI/SL matches the required resolution, channel count, interface, package, and operating conditions before committing a design to production.
MCP3304-CI/P - 13-Bit 8-Channel SAR ADC | Microchip Technology
The Microchip Technology MCP3304-CI/P is a 13-bit successive-approximation analog-to-digital converter with 100 ksps conversion throughput, 4 differential or 8 single-ended inputs, and a 16-pin PDIP package. It operates from a single 5.5 V supply and uses an industry-standard SPI serial interface for communication with microcontrollers and digital acquisition systems. An analog-to-digital converter is an integrated circuit that converts continuous voltage signals into digital values for measurement, control, or data logging. The MCP3304 belongs to the SAR ADC family, whose successive-approximation conversion method supports low power consumption and deterministic sampling suitable for battery-powered instruments, remote sensors, and industrial data acquisition. Its inputs can be configured as differential pairs for noise rejection or as single-ended channels sharing a common reference. Key device characteristics include 13-bit resolution, four differential or eight single-ended input channels, a 100 ksps conversion rate, and single-supply operation at 5.5 V. The C-grade part is specified with maximum differential nonlinearity of ±1 LSB and maximum integral nonlinearity of ±2 LSB. These linearity figures determine how closely the converter code tracks the ideal transfer function and are important when resolving small sensor signals. The MCP3304 uses a serial peripheral interface, or SPI, to receive conversion commands and return sampled data. Its protocol provides a simple connection to an embedded controller while supporting multiple devices on the same serial bus through chip select. The low-power architecture makes the converter suitable for remote and battery-operated acquisition systems where converter energy use is an important part of the overall measurement budget. Typical applications include multi-channel sensor acquisition, industrial process monitoring, portable instrumentation, battery-powered measurement systems, and remote data acquisition. Differential input operation is particularly useful for bridge transducers, current loops, and other sensors whose useful signal is represented as a small voltage difference across paired inputs. When connecting the MCP3304, keep the analog and digital grounds according to the manufacturer's layout guidance and use a clean reference source. Designers must also verify the input voltage range, acquisition timing, and the conversion code format in the manufacturer datasheet before fixing the firmware command sequence and channel-switching schedule. This page consolidates the verified distributor and manufacturer information for the MCP3304-CI/P with package details, application guidance, comparison parameters, and a conservative assessment of drop-in replacement availability. The only verified same-footprint family alternative is identified explicitly; unverified cross-brand substitutes are not presented as drop-in replacements.
MCP3304-CI/SL - 13-Bit 4-Channel SAR ADC | Microchip
The Microchip Technology MCP3304-CI/SL is a 13-bit successive-approximation analog-to-digital converter with 100 ksps conversion speed, four differential or eight single-ended inputs, and an SPI serial interface in a 16-pin SOIC package. It operates from a single 5.5 V supply, making it suitable for battery-powered measurement systems, industrial data acquisition, and remote sensor interfaces. An ADC is a data-acquisition IC that converts an analog voltage into a digital number for processing, display, logging, or control. The MCP3304 belongs to the SAR ADC family, which uses a successive-approximation conversion process and provides a practical balance between resolution, throughput, power consumption, and cost. Its differential inputs reject common-mode noise and support direct measurement of bipolar or ratiometric sensor signals. Key features include 13-bit resolution, 100 ksps sampling performance, four differential or eight single-ended input configurations, and low power consumption. The digital interface uses the industry-standard SPI protocol, allowing the converter to connect to microcontrollers, field-programmable gate arrays, and data loggers. Differential operation also supports the manufacturer's ±1 LSB maximum DNL specification and grade-dependent INL characteristics. The MCP3304 uses an internal sample-and-hold stage and a 13-bit successive-approximation core. Differential and single-ended multiplexing allows one converter to service several sensors, reducing component count in multi-channel systems. Low-power operation suits portable instruments where battery capacity and thermal performance are important. Typical applications include battery-powered environmental monitors, industrial process-control nodes, thermocouple and pressure-sensor interfaces, laboratory measurement equipment, and remote data-acquisition systems. The SPI interface simplifies connection to an embedded controller while the 16-lead SOIC package supports conventional surface-mount assembly. When laying out the circuit, place the input and reference components close to the converter, use a low-noise reference source, and route analog and digital return currents separately. Check the channel multiplexing and polarity settings in firmware because single-ended and differential conversions use different input relationships. Treat the unused analog pins according to the manufacturer's pin-description table when assigning PCB tracks.
MCP3304T-BI/SL - 13-Bit 4-Channel SPI ADC | Microchip
The Microchip Technology MCP3304T-BI/SL is a 13-bit successive-approximation analog-to-digital converter with four differential or eight single-ended inputs, a 100 kHz sampling rate, and an SPI serial interface in a 16-pin SOIC package. Its 4.5 V to 5.5 V operating range makes it suitable for precision industrial, battery-powered, and remote data-acquisition systems. An analog-to-digital converter is an integrated circuit that converts continuously varying analog voltages into numeric values for processing, measurement, or control. The MCP3304 belongs to the ADC, data-converter IC, and semiconductor hierarchy. Its multiplexed input structure supports measurement of several sensors or control signals through one converter, while the SPI interface connects it to a microcontroller or other digital controller. The principal features are 13-bit resolution, four differential or eight single-ended input channels, a 100 kHz conversion rate, and low power consumption. Differential inputs are useful when the measured signal is referenced to another voltage or when common-mode noise must be rejected. Single-ended operation provides a practical choice for battery voltage, temperature-sensor, and resistive-divider measurements. Internally, the converter uses a successive-approximation architecture. Each conversion resolves the input voltage through successive comparisons and transfers the resulting digital code through the serial interface. The 13-bit format provides 8,192 code levels, making the device suitable for measurement systems that need more resolution than a coarse 8-bit ADC without requiring the complexity and power of a higher-resolution converter. Typical uses include remote sensor acquisition, battery-powered instrumentation, industrial process monitoring, portable measurement equipment, and embedded data loggers. The MCP3304 is especially appropriate when several analog channels must share a compact PCB area and communicate through a standard serial bus. Its low-power operating approach also benefits systems in which the duty cycle of active acquisition is limited. When laying out the circuit, reserve the 16-pin SOIC footprint exactly as shown in the package drawing and confirm signal limits, reference-voltage requirements, and acquisition timing in the manufacturer datasheet. Place input and reference components close to their associated pins, maintain a clean return path, and account for digital-interface activity during analog conversion. Proper grounding and reference decoupling are especially important in systems combining low-level sensor signals with switching or wireless circuitry. This product page consolidates the manufacturer device description, distributor identification, package details, and practical use-case guidance for engineers evaluating the MCP3304T-BI/SL. It also provides focused guidance for comparison, sourcing, layout, and drop-in replacement decisions without replacing the complete electrical characteristics and timing information in the Microchip datasheet.
MCP3304T-CI/SL - 13-Bit 4-Channel ADC | Microchip
The Microchip Technology MCP3304T-CI/SL is a 13-bit successive-approximation analog-to-digital converter with four differential inputs, eight single-ended inputs, and an SPI serial interface. It operates from a 4.5 V to 5.5 V supply, supports conversion rates up to 100 kHz, and is packaged in a 16-pin SOIC. An ADC converts an analog voltage into a numeric value for measurement, control, logging, or signal processing. The MCP3304 belongs to the ADC and DAC hierarchy within integrated circuits, combining a sample-and-hold input stage, successive-approximation conversion, and serial data output in one device. Its differential inputs are particularly useful when the measured signal requires rejection of common-mode voltage or rejection of noise referenced to an analog ground. The device provides 13-bit resolution, four differential or eight single-ended input choices, and a 100 kHz maximum sampling capability. Its SPI interface supports communication with microcontrollers and other embedded processors. Low-power operation makes the converter suitable for battery-powered instrumentation, remote data acquisition, industrial control, and portable measurement systems where the complete system must balance conversion speed, energy use, and board area. The MCP3304 architecture samples the selected input and performs successive-approximation conversion, producing one code for each conversion result. The digital result is transferred through the serial interface, reducing the number of signal connections compared with a parallel-output converter. The 16-pin SOIC provides a compact surface-mount footprint and is easier to inspect or service than a very fine-pitch package in low- to moderate-volume industrial equipment. Typical uses include multichannel analog sensing, process monitoring, laboratory measurement, battery-powered data loggers, and embedded control systems. Differential sensing is appropriate when sensors produce a voltage centered around a biased common-mode level, while single-ended operation can simplify systems with multiple sensors referenced to ground. The 100 kHz conversion capability provides headroom for rapidly changing or multiplexed analog signals. Design the analog front end around the input voltage range, source impedance, acquisition time, and reference stability. Keep analog traces short, use a low-noise reference arrangement, and place input and reference decoupling capacitors close to the device. Treat the SPI clock and digital signals as potential noise sources by keeping them away from sensitive input and reference nodes. This page combines the manufacturer product information with package, application, replacement, and design guidance. It also distinguishes exact drop-in choices from functional alternatives that would require different pinouts, packages, or interface assumptions, helping engineers select a converter without changing the PCB unnecessarily.
MCP3422A0-E/MC - 18-Bit Dual-Channel Delta-Sigma ADC | Microchip Technology
The Microchip Technology MCP3422A0-E/MC is an 18-bit, two-channel sigma-delta analog-to-digital converter with differential inputs, an I2C interface, and an 8-pin DFN package measuring 2 x 3 mm. It converts two analog input channels at approximately 3.75 samples per second and includes an onboard precision 2.048 V reference, supporting a differential input range of ±2.048 V. An analog-to-digital converter, or ADC, converts continuous analog voltage into a digital representation for processing, measurement, or control. The MCP3422 belongs to the delta-sigma ADC family and the broader analog-to-digital converter category within Microchip's mixed-signal semiconductor portfolio. Its differential inputs are suited to measuring small voltage changes between paired sensor or signal nodes while rejecting common-mode disturbance when the circuit is implemented effectively. The principal features include 18-bit resolution, two differential input channels, a 3.75 SPS conversion rate, and an onboard 2.048 V reference. The device operates from 3.3 V or 5 V and communicates through I2C. The MCP3422A0-E/MC ordering variant is identified as automotive AEC-Q100 and is supplied in an 8-pin DFN exposed-pad package using a tube packing format. Delta-sigma conversion is appropriate for precision measurement systems where conversion speed is secondary to resolution and noise performance. The MCP3422 family is designed for low-noise, high-accuracy acquisition, and the onboard reference provides a defined differential measurement span without requiring an external reference for basic operation. Differential input architecture helps the system distinguish a small sensor voltage from noise common to both input lines. Typical applications include industrial process measurement, battery and power-system monitoring, temperature sensing with differential sensor bridges, pressure transducer acquisition, laboratory instrumentation, and automotive sensing systems. The two channels allow simultaneous connection of two related differential sensors, while I2C simplifies digital integration with a microcontroller or embedded controller. A critical design consideration is common-mode and differential input range management. Each analog input must remain within the device's supported input and reference limits, and the exposed pad should be connected to ground according to the manufacturer's land pattern. Decoupling, I2C pull-ups, and analog trace routing should follow the manufacturer datasheet recommendations to preserve conversion accuracy. This product page combines the verified MCP3422 family specifications, drop-in address-option comparisons, package details, application guidance, and practical PCB considerations to support faster component selection and implementation planning.
MCP3422A0-E/MS - 18-Bit, 2-Ch ADC | Microchip | Sensor
The Microchip Technology MCP3422A0-E/MS is a two-channel, 18-bit delta-sigma analog-to-digital converter with differential inputs, a 3.75 samples-per-second conversion rate, and an 8-pin MSOP package measuring 3 mm x 3 mm x 0.85 mm. It operates from 2.7 V to 5.5 V and features an onboard precision 2.048 V reference, allowing a nominal differential input range of ±2.048 V. A delta-sigma ADC is a type of analog-to-digital converter that uses continuous-time oversampling, noise shaping, and digital filtering to produce high-resolution conversion results. In the electronic-component hierarchy, this MCP3422 belongs to the ADC family, which sits within data-converter and signal-chain ICs. It is intended for low-frequency measurements where high resolution, differential input capability, and simple serial control are more important than rapid sampling. The MCP3422A0-E/MS provides up to 18 bits of resolution across two analog input channels. Differential inputs reduce sensitivity to common-mode noise when the measured signal is applied between an AIN+ and AIN- terminal. The precision 2.048 V internal reference simplifies ratiometric or direct measurement designs by removing the need for an external reference source. The 3.75 SPS rate supports slowly changing process, temperature, pressure, and bridge-sensor signals rather than waveform capture. Communication uses a two-wire I2C serial interface, which allows the converter to share pins with a host microcontroller or digital sensor hub. A nominal supply current of 145 µA supports low-power instrumentation, while the 2.7 V to 5.5 V operating range covers common 3.3 V and 5 V systems. The converter is designed for surface-mount assembly in compact industrial, medical, environmental, and precision measurement equipment. Typical uses include pressure-transducer monitoring, thermistor bridges, current-shunt measurements, laboratory instrumentation, and low-rate data acquisition. Differential excitation and reference-based scaling can improve immunity to ground offsets and supply ripple, although the selected input and conversion settings must remain within the ADC’s electrical limits. For layout, route analog inputs as short, guarded traces away from switching nodes and digital clock lines. Place the device close to its reference and decoupling network, use a quiet ground-plane arrangement, and provide input filtering appropriate to the source impedance. The slow conversion rate creates timing headroom but requires correct sampling and digital-filter configuration for stable measurements. This product page combines the manufacturer specifications, application-oriented design guidance, package and pin information, and same-footprint replacement analysis. It also explains the electrical trade-offs involved when selecting the MCP3422A0-E/MS for slow, high-resolution differential measurements.
MCP3422A0-E/SN - 18-Bit Dual-Channel ADC | Microchip
The Microchip Technology MCP3422A0-E/SN is a two-channel, low-noise, high-accuracy delta-sigma analog-to-digital converter with up to 18-bit resolution, differential inputs, a 2.048 V internal reference, and an 8-pin SOIC package. It operates from a single 2.7 V to 5.5 V supply and communicates through a two-wire I2C-compatible serial interface. An analog-to-digital converter converts continuous analog voltage into a digital numerical code. The MCP3422 belongs to the delta-sigma ADC family, which uses delta-sigma modulation and digital filtering to deliver high resolution and excellent noise performance for precision measurement. Within the semiconductor hierarchy, it is an ADC, a data-converter IC, and a member of the broader power-management and signal-processing component category. The MCP3422 provides two differential input channels, an on-board precision 2.048 V reference, and a differential input range of plus or minus 2.048 V. Its sigma-delta architecture, I2C-compatible interface, and low-noise measurement characteristics suit sensors, instrumentation, industrial controls, and embedded systems requiring accurate conversion of small differential signals. Conversion performance depends on the selected resolution, gain, sample rate, and configuration. The device supports resolutions up to 18 bits, while an A0 suffix identifies the specific configuration represented by MCP3422A0. The manufacturer describes the MCP3422 family as low-noise and high-accuracy, with conversion methods intended for precision rather than high-speed waveform acquisition. Typical uses include bridge or ratiometric sensor measurement, current sensing, battery and power-system monitoring, process-control instrumentation, and low-level analog front ends. Differential inputs help reject common-mode noise when the source and return paths are routed together, while the internal reference simplifies designs that do not require an external reference. For PCB implementation, use the manufacturer pin-description and layout guidance when assigning the eight SOIC connections. Keep analog inputs, reference connections, and decoupling paths compact, and route I2C clock and data lines away from sensitive analog traces. Confirm the selected conversion settings against the required input range, resolution, sample rate, and noise performance.
MCP3422A1-E/MC - 18-Bit Dual-Channel ADC | Microchip
The Microchip Technology MCP3422A1-E/MC is a dual-channel, 18-bit delta-sigma analog-to-digital converter with differential inputs, a 240 SPS conversion rate, and an 8-DFN 2 x 3 mm package. Its integrated precision reference supports a differential input range of ±2.048 V, while its two-wire I2C interface provides compact communication with embedded systems. A delta-sigma ADC is a voltage-regulating class of data-conversion IC that uses continuous-time or sampled internal signals to measure an analog differential voltage. Its hierarchy is ADC > delta-sigma ADC > data converter > integrated circuit. The architecture favors high resolution and low noise rather than very high conversion speed, making this device appropriate for slowly changing sensor signals rather than waveform or high-speed acquisition systems. Key features include two differential input channels, resolution up to 18 bits, an integrated 2.048 V reference, and a 240 SPS maximum conversion rate identified for the MCP3422A1-E/MC. The I2C interface reduces the number of signal lines required from a sensor module to the host controller. Differential measurement also helps reject common-mode noise when the two input wires experience similar external interference. The MCP3422 family uses a delta-sigma conversion architecture optimized for precision measurement. Its resolution and reference arrangement support high-accuracy measurements of low-level analog signals, while differential inputs can be connected to sensor bridges, potentiometers, or other balanced sensing networks. The 8-DFN package minimizes PCB area, but its exposed pad and thermal requirements must be considered when laying out the board and setting copper coverage. Typical applications include industrial pressure and temperature acquisition, current monitoring, laboratory measurement instruments, portable sensor nodes, and process-control equipment. Two channels can measure a differential sensor pair or two related inputs, while the digital interface allows readings to be transferred directly to an MCU or embedded controller. For applications requiring faster conversion, designers should select a different ADC rather than increase the load on this converter. Place input, reference, and decoupling capacitors close to their associated pins, keep analog routing away from switching nodes, and connect the exposed pad to a properly sized ground plane. Confirm the differential input range, gain configuration, conversion time, I2C address, and acquisition sequence against the manufacturer's datasheet before finalizing the analog front end. This page combines the MCP3422A1-E/MC electrical characteristics, package details, pin-compatible family alternatives, comparison parameters, and practical PCB guidance. It is intended to help engineers evaluate the converter, select an appropriate replacement, and integrate a compact, low-noise differential measurement channel without relying on raw catalog summaries alone.
MCP3422A1-E/MS - 18-Bit Dual-Channel Delta-Sigma ADC | Microchip
The Microchip Technology MCP3422A1-E/MS is a two-channel, 18-bit delta-sigma analog-to-digital converter operating at up to 4 samples per second, with differential inputs and an 8-MSOP package. Its key specifications include 18-bit resolution, a 2.048 V internal reference, a 2.7 V to 5.5 V supply range, and a two-wire I2C-compatible serial interface. An ADC is a mixed-signal semiconductor that converts continuously varying analog voltages into digital codes for processing, measurement, storage, or control. The MCP3422 belongs to the delta-sigma ADC family within the broader ADC and data-conversion IC hierarchy. Delta-sigma conversion is especially useful when low noise, high effective resolution, and simple analog front ends are more important than very high conversion speed. The MCP3422A1-E/MS provides two differential input channels and converts analog inputs to digital codes with up to 18 bits of resolution. Its onboard precision 2.048 V reference establishes a differential input range of plus or minus 2.048 V. The device operates from a single 2.7 V to 5.5 V supply and supports standard, fast, and high-speed I2C-compatible modes, giving designers flexibility in bus speed and system partitioning. The converter's sigma-delta architecture is suited to slow-changing sensor signals rather than high-frequency waveform acquisition. At 4 samples per second, it prioritizes noise rejection and resolution for pressure, temperature, chemical, potentiometric, and bridge-based measurements. Its two-channel architecture allows paired or differential sensing while keeping the analog front end compact, and its MSOP-8 form factor supports space-constrained instrumentation. Typical applications include industrial process monitoring, portable sensor instrumentation, battery-powered measurement systems, laboratory data acquisition, and low-rate environmental sensing. Differential inputs are particularly useful when measuring small signals stacked on larger common-mode voltages or when reducing errors from ground offsets and coupled noise. Designers should place input filtering and protection close to the converter, route analog and digital signals carefully, and use suitable bypass capacitors around the supply pins. Because conversion is intentionally low-rate, the device should not be selected for sampling fast transients or wideband waveforms unless the complete signal chain can deliver the required bandwidth and conversion performance. This product record combines the manufacturer's converter specifications with package, sourcing, drop-in comparison, and design guidance for engineers evaluating the MCP3422A1-E/MS. It also highlights the practical distinction between low-noise precision conversion and high-speed data acquisition so the correct ADC architecture can be selected for the measurement task.
MCP3422A1-E/SN - 18-Bit Dual-Channel Delta-Sigma ADC | Microchip
Microchip Technology MCP3422A1-E/SN is a two-channel, 18-bit delta-sigma analog-to-digital converter with differential inputs, an integrated 2.048 V precision reference, and an I2C interface. The converter operates at 3.3 V or 5 V and is packaged in an 8-pin SOIC. Its differential input range is ±2.048 V when the internal reference is used, while its low-noise architecture targets accurate measurement of low-level analog signals. A delta-sigma ADC is an analog-to-digital converter category that uses oversampling and digital filtering to achieve high resolution and noise performance. The MCP3422 belongs to the broader hierarchy of data-converter ICs, analog-to-digital converters, and signal-chain semiconductors. Its two differential channels can reject common-mode noise when paired with suitable front-end circuitry, while the digital interface allows a microcontroller or embedded system to retrieve conversion results over I2C. The MCP3422 family provides up to 18 bits of resolution and includes a 2.048 V on-board reference. The A1-E/SN ordering configuration is identified by distributors as an 18-bit, dual-input, delta-sigma ADC in an 8-SOIC package. The operating temperature range extends from -40°C to +125°C, making the device suitable for industrial and automotive-oriented measurement systems when the individual qualification and regulatory requirements are satisfied for the assembled design. The MCP3422A1-E/SN converts at 3.75 samples per second, prioritizing conversion resolution and noise performance rather than high-speed waveform acquisition. Its differential inputs and integrated reference simplify instrumentation designs by reducing the need for an external low-noise reference and input-conditioning network. Applications include bridge excitation, pressure and force sensing, current measurement, battery monitoring, temperature measurement, and low-level industrial signal acquisition. For PCB implementation, use an 8-pin SOIC land pattern and follow the manufacturer pin-description table when assigning power, ground, analog inputs, and I2C signals. Keep analog input routing compact and place input filtering close to the converter. Provide stable supply decoupling and use pull-up resistors on the I2C bus in accordance with the interface voltage and bus capacitance. The principal design trade-off is conversion speed versus resolution. The MCP3422A1-E/SN is appropriate for slowly changing sensor signals where 18-bit precision is more valuable than rapid sampling. For waveforms requiring substantially faster acquisition, select a converter whose conversion rate and signal bandwidth match the measured phenomenon rather than treating resolution alone as the system requirement. This page combines manufacturer specifications, exact-ordering-code sourcing information, drop-in family alternatives, comparison parameters, and practical layout guidance. It also identifies the operating distinctions that matter when choosing a pin-compatible member of the MCP3422 family for precision sensor and industrial measurement designs.
MCP3422A2-E/MC - 18-Bit Dual-Channel Delta-Sigma ADC | Microchip Technology
The Microchip Technology MCP3422A2-E/MC is an 18-bit, dual-channel delta-sigma analog-to-digital converter with differential inputs, an integrated 2.048 V precision reference, and an I2C interface. It operates from a 2.7 V to 5.5 V digital supply and is available in an 8-VFDFN exposed-pad surface-mount package. The converter supports input ranges up to plus or minus 2.048 V differentially when the onboard reference is used. A delta-sigma ADC is a voltage-regulating measurement category that converts continuous analog signals into high-resolution digital values using oversampling and digital filtering. The MCP3422A2 belongs to the analog-to-digital converter hierarchy, which sits within data-acquisition ICs, signal-chain ICs, and broader semiconductor systems. Its differential architecture reduces sensitivity to common-mode noise when sensors, bridges, or transducers are connected to the two analog inputs. The device combines two differential analog input channels with 18-bit resolution and conversion rates up to 240 samples per second. The integrated 2.048 V reference simplifies designs that do not require an external precision reference. The I2C interface reduces the number of communication pins required by a host microcontroller, while selectable device-address configurations help avoid bus conflicts when several converters share the same two-wire bus. The MCP3422A2-E/MC is suitable for industrial process monitoring, sensor-interface boards, instrumentation, low-frequency measurement systems, and embedded data-acquisition designs. Differential inputs are particularly useful for measuring small signals from current shunts, resistive bridges, pressure transducers, and other transducers where a second input can provide a reference or cancellation path. The low-noise architecture is intended for applications that value resolution and input accuracy more than very high sampling rates. The principal design trade-off is throughput versus resolution and conversion latency. The 18-bit conversion process requires digital filtering, so applications requiring continuous high-speed sampling should account for the specified conversion-time and data-availability behavior. The exposed pad also needs a properly designed thermal and grounding layout to avoid degrading accuracy or increasing supply-noise coupling. This page combines manufacturer specifications, distributor listing data, package information, application guidance, and practical design notes to help engineers evaluate the MCP3422A2-E/MC for precision low-speed measurement designs.
MCP3422A2-E/MS - 18-Bit Dual-Input ADC | Microchip
The Microchip Technology MCP3422A2-E/MS is an 18-bit, dual-input, delta-sigma analog-to-digital converter with differential inputs, a programmable gain amplifier, and a sampling rate of 3.75 kSPS. It operates from 2.7 V to 5.5 V and is supplied in an 8-MSOP surface-mount package. The MCP3422 family is designed for precision measurement of low-frequency analog signals where noise performance, resolution, and integrated voltage reference accuracy are more important than conversion speed. An ADC is an analog-to-digital converter, a semiconductor that transforms a continuously varying voltage into a numeric code for processing by a microcontroller or other digital system. The MCP3422 belongs to the delta-sigma ADC class and the broader data-converter IC hierarchy. Its integrated 2.048 V reference supports a differential input range of plus or minus 2.048 V, while the programmable gain stage allows the converter to scale smaller sensor outputs into the available conversion range. Key specifications include 18-bit resolution, 2 differential inputs, a 3.75 kSPS conversion rate, a 2.7 V to 5.5 V supply range, and an integrated programmable gain amplifier. The low-noise architecture is suitable for bridge sensors, current measurements, potentiometer positions, temperature signals, and other slowly changing quantities. The 8-MSOP package supports compact PCB layouts without requiring a high pin count. The delta-sigma conversion architecture continuously samples and filters the input, trading conversion speed for high resolution and good noise performance. The device can be paired with an I2C-compatible host, allowing measured values to be transferred digitally rather than converted by a separate external ADC. Firmware must configure the gain, conversion timing, data rate, channel selection, and operating mode through the device registers. Typical uses include industrial process monitoring, laboratory instrumentation, battery-powered sensing, environmental measurement, and low-speed control loops. The 3.75 kSPS rate is appropriate for temperature, pressure, strain, and chemical-sensor outputs that change over seconds or minutes. It is not the preferred choice for high-bandwidth waveform capture, where a substantially faster SAR or other converter would be more appropriate. PCB implementation should keep analog input traces short, provide a quiet ground return, place input filtering close to the converter, and decouple the supply pins. Input filtering, common-mode range, source impedance, and reference accuracy must be evaluated together because each can influence the achievable code accuracy. The manufacturer MCP3422 product page and datasheet provide the authoritative pin descriptions, register map, and application guidance. This product record combines the manufacturer specifications with package, application, comparison, and replacement guidance. It also identifies the exact family variants that can be evaluated when a different gain setting, conversion-rate option, or package arrangement is required. Use the Request a Quote form on this page for current commercial availability, and confirm lifecycle and manufacturing status with Microchip Technology before committing a production design.
MCP3422A2-E/SN - 18-Bit Dual Delta-Sigma ADC | Microchip
Microchip Technology MCP3422A2-E/SN is an 18-bit, dual-channel delta-sigma analog-to-digital converter with differential inputs, 4 samples per second conversion speed, a 2.048 V internal reference, and an 8-pin SOIC package. It converts two bipolar differential analog signals to digital values through a two-wire I2C-compatible serial interface. A delta-sigma ADC is a mixed-signal data-acquisition IC that uses continuous-time integration and noise shaping to achieve high resolution without requiring a high-frequency flash or successive-approximation conversion core. Within the ADC hierarchy, this device belongs to the precision low-speed converter class: sigma-delta ADC, differential ADC, low-noise ADC, and power-management-compatible analog front end. Its internal reference establishes a differential input range of plus or minus 2.048 V. The MCP3422A2-E/SN supports 18-bit resolution, two analog input channels, a 4 sps conversion rate, and differential measurement. These characteristics suit precision instrumentation rather than high-bandwidth waveform capture. Differential inputs can reject common-mode disturbance when the sensor source is arranged around the common-mode voltage, while the integrated 2.048 V reference simplifies systems that do not require an external precision reference. The device operates from a single 3.3 V or 5 V supply and communicates through a two-wire I2C-compatible interface. Its 8-pin SOIC package reduces board area compared with larger converter packages, but the analog input and reference network still require careful routing. The low conversion rate is a deliberate trade-off: it supports accurate measurements and noise rejection but is not appropriate for sampling fast-changing signals. Typical applications include industrial pressure and temperature transmitters, low-frequency sensor acquisition, weighing systems, laboratory measurement equipment, and battery-powered monitoring products. In these systems, the converter can digitize differential sensor outputs while the I2C interface transfers results to a microcontroller or embedded control system. A local microcontroller can then apply calibration, filtering, diagnostics, and data logging without requiring a separate high-resolution ADC. For implementation, place the analog input traces away from switching nodes and route the differential pair as a compact pair with uninterrupted ground reference. Confirm that the common-mode voltage remains inside the device operating limits, and calculate conversion latency before scheduling multiple channels. The 4 sps rate means each differential conversion requires 250 ms, so dual-channel sequential sampling may require substantially more than that total measurement interval. This product page combines the manufacturer specifications, package and interface details, family-member alternatives, comparison criteria, and application-focused engineering guidance. It is intended to accelerate component selection, schematic review, PCB planning, and sourcing for precision, low-speed differential measurement designs.
MCP3422A3-E/MC - 18-Bit Dual-Channel Delta-Sigma ADC | Microchip
The Microchip Technology MCP3422A3-E/MC is an 18-bit, two-channel delta-sigma analog-to-digital converter with differential inputs and an I2C interface, housed in an 8-pin DFN package measuring 2 mm by 3 mm. Its on-board precision reference is 2.048 V, establishing a differential input range of plus or minus 2.048 V, while the device operates from a 2.7 V to 5.5 V supply. These characteristics position it as a compact, high-resolution converter for low-frequency measurement systems. An analog-to-digital converter, or ADC, converts continuous analog voltages into numeric values that a microcontroller or embedded system can process. The MCP3422 belongs to the delta-sigma ADC family, where an internal modulator and digital filter shape the conversion result with high resolution and good noise performance at relatively low sample rates. This two-channel device supports differential measurement, which helps reject common-mode noise when a sensor output is referenced to a nearby analog ground. The MCP3422 family provides up to 18 bits of resolution and integrates a 2.048 V precision reference. Differential input capability and the internal reference reduce the need for external active balancing networks. The I2C interface also reduces the number of signal connections required between the converter and a host controller. Compared with general-purpose flash-based ADCs, the architecture is better suited to instrumentation, industrial monitoring, and slowly changing sensor signals rather than high-speed waveform capture. The A3 designation identifies the speed grade within the MCP3422 family. The related MCP3422A3T-E/MS listing identifies this performance level as approximately 3.75 samples per second, making the A3 version appropriate for temperature, pressure, load-cell, and process-control measurements where low conversion throughput is acceptable. Differential measurements can also use the device's programmable gain behavior when the signal amplitude requires additional sensitivity. Typical applications include bridge-based pressure and load measurements, current-shunt monitoring, precision temperature sensing, laboratory instrumentation, and factory automation. The 2 mm by 3 mm DFN package supports compact analog front ends, but the small thermal pad and exposed package structure require careful PCB layout and solder assembly. The 2.7 V to 5.5 V operating range also allows the converter to share supply arrangements with both 3.3 V and 5 V embedded systems. When laying out this device, place input filtering and reference-decoupling components close to their associated pins, route the exposed pad into a thermal and ground plane, and keep digital I2C traces away from high-impedance differential inputs. Confirm the selected conversion speed against the required latency and noise trade-off, and use the manufacturer pin-description table when assigning PCB tracks and test points. This page combines device specifications, package details, application guidance, design notes, and a structured comparison with related MCP3422 devices. It also highlights the differences between gain grades and package options so engineers can identify a compatible replacement without confusing an 8-pin DFN part with an MSOP or SOIC variant.
MCP3422A3-E/MS - 18-Bit Dual-Input ADC | Microchip Technology
The Microchip Technology MCP3422A3-E/MS is an 18-bit, two-channel sigma-delta analog-to-digital converter with differential inputs, a 3.75 samples-per-second conversion rate, and an 8-MSOP package. It operates from 2.7 V to 5.5 V, communicates through an I2C interface, and includes an onboard 2.048 V precision reference. An ADC converts an analog voltage into a digital code for measurement, control, logging, or display. The MCP3422 belongs to the sigma-delta ADC hierarchy within data-converter and mixed-signal semiconductor families. Its differential measurement capability supports sensing of small voltage changes between two nodes, while the I2C interface allows the converter to connect efficiently to microcontrollers, sensors, and industrial measurement systems. Key features include resolution up to 18 bits, two differential input channels, an onboard 2.048 V reference, and a differential input range of ±2.048 V. The low-noise architecture is intended for precision acquisition rather than high-speed waveform capture. The A3 conversion-speed option provides 3.75 samples per second, making it appropriate for slowly changing process, temperature, pressure, and strain signals. The device uses a sigma-delta modulation and digital filtering approach to achieve high resolution from a low-speed measurement system. An internal multiplexer routes the selected differential channel into the converter, and an internal programmable gain amplifier allows the analog front end to match the signal range. The I2C interface reduces wiring requirements while providing a straightforward connection to embedded processors. Typical applications include industrial process monitoring, environmental sensors, portable instrumentation, bridge-sensor signal acquisition, and low-rate battery-powered measurement. The automotive qualification indicated for this variant supports designs requiring AEC-Q100-qualified components, although individual operating requirements should be confirmed against the manufacturer documentation. Design the analog input path for low noise and correct common-mode range. Keep analog traces short, maintain a quiet reference and supply return, use suitable input filtering, and verify that source impedance remains acceptable for the selected gain and conversion speed. The MSOP package also requires a land pattern that follows the manufacturer pin and exposed-pad guidance. This page combines the manufacturer product information, distributor listings, package details, application guidance, and substitution analysis into a practical engineering reference for selecting and implementing the MCP3422A3-E/MS.
MCP3422A3-E/SN - 18-Bit Dual-Channel Delta-Sigma ADC
The Microchip Technology MCP3422A3-E/SN is an 18-bit, dual-channel, sigma-delta analog-to-digital converter with differential inputs, a 3.75-sample-per-second conversion rate, and an 8-pin SOIC package. Its integrated 2.048 V precision reference supports a differential input range of ±2.048 V, while the I²C-compatible interface simplifies connection to embedded controllers. A sigma-delta ADC is a voltage regulator that is designed for high-resolution measurement. In this architecture, the analog input is continuously sampled and converted through noise shaping and digital filtering before being transferred over a serial interface. Within the signal-chain hierarchy, the MCP3422A3-E/SN is an ADC, a data-acquisition IC, and ultimately a signal-conditioning and measurement component. The converter combines two differential measurement channels with up to 18 bits of resolution. Low-noise delta-sigma conversion is particularly useful when the target signal changes slowly and the required performance emphasizes resolution, linearity, and noise performance rather than high sampling bandwidth. The integrated precision reference removes the need for an external reference supply, helping simplify instrument design and preserve measurement consistency. The MCP3422A3-E/SN uses a two-wire I²C-compatible serial interface and operates from a single supply in the 2.7 V to 5 V range. These characteristics make it practical for industrial monitoring, portable instrumentation, and embedded sensor systems where low power, small PCB area, and deterministic digital communication are more important than rapid transient sampling. Typical uses include bridge or ratiometric sensor measurement, current-shunt monitoring, battery-cell voltage acquisition, laboratory data logging, and low-frequency process-control instrumentation. Differential inputs help reject common-mode disturbance when the transducer is referenced near the converter ground, although the input source impedance and settling behavior must be considered in the analog front end. PCB implementation should keep the analog input traces compact, provide a low-impedance return path, and decouple the supply close to the device. Allow adequate settling time after changing the I²C configuration or channel selection, and confirm that the selected conversion mode satisfies the required measurement bandwidth. This page combines device specifications, same-package alternatives, application guidance, and practical design notes to support component selection and PCB implementation.
MCP3422A4-E/MC - 18-Bit Dual-Channel ADC | Microchip
The Microchip Technology MCP3422A4-E/MC is an 18-bit, two-channel delta-sigma analog-to-digital converter with differential inputs, an onboard 2.048 V precision reference, and an 8-DFN 2x3 mm package. It supports analog measurement to 18-bit resolution and is intended for precision instrumentation, sensor interfaces, and low-frequency data-acquisition systems. A delta-sigma ADC is a voltage-to-digital converter category that uses oversampling, noise shaping, and digital filtering to obtain high resolution and excellent low-frequency accuracy. Within the broader hierarchy, the MCP3422 belongs to the ADC family, combines a sigma-delta conversion core with an integrated reference, and serves as a precision data-acquisition IC. Its differential inputs reject common-mode disturbance when paired with suitable sensing circuits. Key device features include two differential input channels, resolution up to 18 bits, and an onboard 2.048 V reference. The manufacturer identifies the MCP3422 family as a low-noise, high-accuracy converter, while the A4 ordering option is associated with a 4 samples-per-second conversion rate in the distributor listing. Differential measurement spans a nominal ±2.048 V range when the internal reference is used. The I2C interface provides a compact connection to embedded controllers. The converter architecture prioritizes resolution and noise performance rather than high-speed sampling. This makes it appropriate for slow or quasi-static measurements where averaging, settling time, and input-referred noise determine usable accuracy. Each channel should be evaluated for its selected conversion mode and output data rate, while external front-end protection, filtering, and reference-bypass placement can materially affect repeated measurements. Typical applications include differential pressure and bridge sensors, temperature measurement systems, current-shunt instrumentation, laboratory data loggers, and industrial process monitoring. For a bridge sensor, the two differential inputs can measure excitation-induced changes while rejecting much of the common supply and ground variation present at the transducer. A successful layout keeps analog inputs, reference bypassing, and the exposed pad thermally and electrically well managed. Place input and reference capacitors close to their associated pins, maintain a quiet analog ground return, and follow the manufacturer’s package drawing for exposed-pad soldering. Confirm that the selected channel combination, conversion rate, and data-registration settings satisfy the required measurement latency. This product page combines manufacturer device positioning, package and resolution details, structured pricing records, compatible same-family replacements, and practical design guidance to support faster component selection and PCB planning.
MCP3422A4-E/MS - 18-Bit Dual-Input Sigma-Delta ADC
The Microchip Technology MCP3422A4-E/MS is an 18-bit, two-channel sigma-delta analog-to-digital converter with a conversion rate of 3.75 samples per second, a 2.048 V internal reference, differential inputs, and an I2C interface in an 8-pin MSOP package. Its operating supply range is 2.7 V to 5.5 V. An ADC is an analog-to-digital converter, a semiconductor that transforms continuously varying voltage signals into numerical values for processing, measurement, or control. The MCP3422 belongs to the delta-sigma ADC family, where an internal modulator and digital filter shape the conversion result. It also fits the broader hierarchy of data-converter ICs, signal-chain ICs, and semiconductor components used in precision instrumentation. The MCP3422A4-E/MS provides up to 18-bit resolution across two differential input channels. Its integrated 2.048 V reference supports a differential input range of plus or minus 2.048 V, while the I2C interface allows a host microcontroller to configure the converter and retrieve conversion results. A 3.75 SPS rate favors stable measurements over high-speed waveform capture, and the 2.7 V to 5.5 V supply range supports both 3.3 V and 5 V systems. The sigma-delta architecture emphasizes resolution, noise rejection, and effective performance for slowly changing or low-bandwidth signals. Differential input operation helps reject common-mode interference when a sensor is connected through balanced wiring. The internal reference reduces the number of external precision components, although reference accuracy, noise, and front-end design still determine the practical resolution of the complete measurement chain. Typical uses include pressure and temperature transducers, bridge sensors, industrial process monitoring, laboratory measurement equipment, and low-rate sensor acquisition. The dual differential channels allow one converter to service two related analog inputs. Its 18-bit code depth is useful when the signal-to-noise ratio of the sensor and analog front end is sufficient to justify the extra resolution. Design should begin with the input common-mode range, differential signal amplitude, and I2C bus requirements. Keep analog input traces short, use suitable filtering at the converter pins, and provide stable supply bypassing. Because this is a precision low-speed ADC, layout symmetry, connector cleanliness, reference grounding, and rejection of switching-node interference often matter more than raw processing speed. This product summary combines manufacturer specifications, package and sourcing details, compatible family references, comparison parameters, and implementation guidance to support component selection and PCB design. The result also distinguishes device functions, electrical limits, and replacement considerations so engineers can assess fit before committing the 8-MSOP footprint to a design.
MCP3422A4-E/SN - 18-Bit Dual-Channel ADC | Microchip
The Microchip Technology MCP3422A4-E/SN is an 18-bit, dual-channel delta-sigma analog-to-digital converter with differential inputs, a 3.75 SPS conversion rate, and an 8-pin SOIC package. Its integrated 2.048 V precision reference supports a differential input range of ±2.048 V, while its two-wire I2C-compatible interface connects efficiently to embedded processors and sensors. An ADC converts an analog voltage into a digital code for measurement, control, logging, or signal processing. The MCP3422 belongs to the delta-sigma ADC, data converter IC, and analog-to-digital converter hierarchy. Delta-sigma architectures are especially useful when high resolution, low noise, and good rejection of slow analog disturbances are more important than very high conversion throughput. The principal features of the MCP3422 include two differential analog input channels, resolution up to 18 bits, an on-board 2.048 V reference, and operation from a single 2.7 V to 5.5 V supply. The A4 grade is associated with a 3.75 SPS conversion rate, making it suitable for continuous monitoring of slowly changing quantities such as temperature, pressure, load-cell output, and process-control signals. The MCP3422 family combines continuous or single-shot conversion operation with an I2C-compatible serial interface. Differential inputs help reject common-mode noise when the source is arranged around ground or another biased reference. Using the internal reference simplifies the external circuit, although the application must remain within the ±2.048 V differential input range unless suitable external circuitry limits the signal. Typical uses include industrial sensor acquisition, battery-powered environmental monitors, pressure and temperature instrumentation, precision weighing systems, and low-speed laboratory measurement equipment. Two input channels allow the converter to monitor either two independent sensor outputs or paired differential signals without requiring two separate converter packages. Design the input network so that source impedance, common-mode voltage, and ESD protection do not overload the analog inputs. Place input filtering and reference-decoupling components close to the device, maintain clean supply routing, and confirm the I2C pull-up voltage and bus capacitance against the selected operating supply. This product page combines manufacturer specifications, application guidance, package information, and verified same-package alternatives to support component selection and PCB planning. It also highlights the trade-offs between conversion rate, noise performance, channel count, and interface requirements for embedded measurement designs.
MCP3422A5-E/MC - 18-Bit Dual-Input Sigma-Delta ADC | Microchip
The Microchip Technology MCP3422A5-E/MC is an 18-bit, dual-input sigma-delta analog-to-digital converter with a 3.75 Hz conversion rate, 2.7 V to 5.5 V supply range, I2C interface, and onboard voltage reference. The device is packaged in an 8-pin DFN measuring 2 mm by 3 mm, making it suitable for compact precision-measurement systems that require low-noise conversion and a serialized digital interface. An analog-to-digital converter is an integrated circuit that converts an analog input voltage into a numeric value for processing, storage, display, or control. The MCP3422 belongs to the ADC hierarchy and uses a sigma-delta architecture, which is especially useful for low-frequency precision measurements where narrow bandwidth is more important than high-rate waveform capture. Its two analog input channels allow one converter to serve multiple sensors or measurement nodes. The MCP3422A5-E/MC provides 18-bit resolution, dual analog inputs, and a 3.75 Hz conversion rate. These characteristics suit temperature, pressure, load-cell, chemical-sensor, and slow industrial process measurements where a stable input signal is sampled over time. Its operating supply range of 2.7 V to 5.5 V supports both 3.3 V and 5 V system architectures, while the I2C interface reduces the number of signal connections required on a compact circuit board. Sigma-delta conversion uses continuous-time modulation and digital filtering to reduce quantization noise near the signal bandwidth. This makes the architecture appropriate for extracting relatively small changes from sensor outputs without requiring a high-speed successive-approximation ADC. The onboard reference supports a self-contained measurement chain, while external analog conditioning remains important for protecting the inputs and scaling signals into the converter’s measurement range. Typical applications include battery-powered environmental sensors, industrial pressure transmitters, precision temperature instrumentation, laboratory data-acquisition modules, and low-rate weighing systems. The 2 mm by 3 mm DFN package supports compact sensor assemblies, and the dual-input arrangement can reduce component count when two related analog signals must be measured. PCB design should prioritize a quiet reference return, short analog traces, and placement of input filtering close to the MCP3422A5-E/MC. Because this is a low-rate precision ADC, switching circuitry and high-current digital paths should be kept away from the analog pins to avoid degrading the measured signal. This product page combines the exact MCP3422A5-E/MC electrical identity, package information, drop-in family alternatives, comparison data, and practical design guidance to support component selection, PCB planning, and sourcing decisions.
MCP3422A5-E/MS - 18-Bit I2C ADC | Microchip Technology
The Microchip Technology MCP3422A5-E/MS is an 18-bit, two-input sigma-delta analog-to-digital converter with an I2C interface and an on-board reference, packaged in an 8-MSOP. It converts analog input voltages into high-resolution digital measurements for low-speed sensing systems. The manufacturer identifies the device as a 1 sigma-delta ADC, while distributor listings describe the family as a multichannel converter with approximately 4 samples per second operation. An ADC is a data-conversion IC that transforms an analog voltage into a numeric value for processing, measurement, logging, or control. The MCP3422 belongs to the broader ADC hierarchy and specifically uses a delta-sigma conversion architecture. Its differential or single-ended input architecture, onboard voltage reference, and serial I2C interface reduce the number of external signal-conditioning and communications components required in compact embedded designs. The principal feature of the MCP3422A5-E/MS is its 18-bit resolution. Resolution determines the number of discrete codes available across the converter range, making the device suitable for sensors that produce small voltage changes. Its 8-pin MSOP construction supports compact PCB layouts, while the I2C interface allows the converter to share a two-wire bus with a microcontroller or other compatible peripherals. The delta-sigma architecture emphasizes resolution and noise performance for low-frequency signals rather than high-speed waveform capture. The approximately 4 samples per second operating rate shown in the product listing makes repeated readings practical for temperature, pressure, chemical, and other slowly changing sensor measurements. Designers should use the manufacturer pin-description table when assigning analog inputs, reference connections, ground returns, and I2C signals to PCB tracks. Typical uses include industrial process monitoring, environmental sensing, laboratory instrumentation, and portable equipment that records slowly varying analog quantities. Differential measurement can help reject common-mode noise when the sensor is referenced to a remote or noisy ground. Single-channel operation is also useful where one transducer must be measured with minimum analog front-end complexity. The main design consideration is digital-noise coupling. Place the analog input traces away from switching nodes and route a quiet ground return beneath or alongside the measurement path. Confirm the selected conversion rate, input range, reference behavior, and capacitor requirements in the manufacturer datasheet before finalizing filtering, gain, and sampling timing. This page consolidates the verified product identity, package information, sourcing path, family drop-in options, and practical ADC design guidance. It also organizes the selection trade-offs among MCP3422 conversion-rate variants and separates verified product facts from parameters that require an engineering review.
MCP3422A5-E/SN - 18-Bit Dual-Channel Delta-Sigma ADC
The Microchip Technology MCP3422A5-E/SN is an 18-bit, two-channel delta-sigma analog-to-digital converter with differential inputs, a 2.048 V on-board reference, and a 4 sps conversion rate, packaged in an 8-pin SOIC. It operates from a single 2.7 V to 5.5 V supply and communicates through a two-wire I²C-compatible serial interface. An ADC converts an analog voltage into a digital value for measurement, control, or data logging. The MCP3422 belongs to the delta-sigma ADC class, which uses continuous-time sampling and digital filtering to deliver high resolution and low noise. Within the signal-chain hierarchy, it sits between sensors or front-end circuits and a digital controller, combining an analog measurement function with an I²C interface. The two differential input channels support measurement of bipolar signals around the selected conversion gain. An on-board precision 2.048 V reference establishes the differential input range of ±2.048 V. Differential operation rejects common-mode voltage, while the 18-bit converter resolution supports high-resolution measurements in sensors, industrial controls, and instrumentation. The A5 variant is identified in product listings as a 4 sps delta-sigma ADC. The MCP3422 architecture integrates the converter, on-board reference, input channels, and digital control into one compact IC. Conversion data is transferred over the two-wire serial interface, reducing the number of connections required between the analog measurement section and a host controller. Its single-supply operation also simplifies systems that use either 3.3 V or 5 V logic and analog rails. Configuration and measurement sequencing are handled through the device command interface rather than separate programming pins. Typical uses include bridge or ratiometric sensor measurement, industrial process monitoring, low-frequency instrumentation, portable data acquisition, and embedded control systems with slow-changing analog inputs. The differential inputs are especially useful when the measured quantity appears as a small voltage superimposed on a larger common-mode voltage. The 4 sps conversion rate is appropriate for temperature, pressure, load, and position measurements rather than high-bandwidth waveform acquisition. Designers should apply input filtering and carefully observe the differential input range, because the 2.048 V reference also determines the usable signal span. Place input and reference components near the device, provide a clean supply connection, and route I²C signals away from sensitive analog inputs. Verify the conversion rate and digital timing against the required control-loop interval before fixing the system sampling schedule. This page combines manufacturer specifications, package information, pricing availability, selectable drop-in alternatives, and application-focused design guidance. It also provides practical context for choosing the A5 speed grade, planning the analog front end, and evaluating replacement options without changing the 8-pin SOIC footprint.
MCP3422A6-E/MC - 18-Bit Dual-Channel ADC | Microchip
The Microchip Technology MCP3422A6-E/MC is an 18-bit, dual-channel delta-sigma analog-to-digital converter with differential inputs, conversion rates up to 240 samples per second, and an 8-pin DFN package measuring 2 x 3 mm. It uses a two-wire I2C interface and an onboard 2.048 V precision reference, providing a differential input range of plus or minus 2.048 V. An analog-to-digital converter, or ADC, converts continuous analog voltage into a numerical value for measurement, control, logging, or display. A delta-sigma ADC is a voltage-to-digital converter category that uses continuous-time sampling and digital filtering to provide high resolution and good noise performance. In the broader semiconductor hierarchy, the MCP3422A6-E/MC belongs to the ADC/DAC class of data-converter integrated circuits and ultimately to the wider semiconductor category. Key features include resolution up to 18 bits, two differential measurement channels, an onboard 2.048 V reference, bipolar differential input capability, automatic calibration, and power-on reset. The A6 selection supports a maximum conversion rate of 240 SPS according to the manufacturer documentation. Its 2-wire interface supports communication with a host controller, while the compact 8-DFN package reduces board area in space-constrained measurement systems. The device combines a low-noise, high-accuracy delta-sigma conversion stage with differential input capability. Differential measurement rejects common-mode voltage that appears simultaneously on both inputs, which is valuable when a sensor output is referenced to a ground or supply rail. The onboard reference simplifies designs that do not require an external precision reference, while the I2C interface enables configuration and digital result transfer over only two signal connections. Typical uses include industrial pressure and temperature acquisition, portable instrumentation, laboratory measurement, process monitoring, and low-bandwidth sensor interfaces. Differential channels can monitor bridge sensors, current-sense signals, or two related voltages when the source can be arranged so both inputs remain within the supported measurement range. When designing the circuit, treat the analog inputs, reference, and ground connections as sensitive signal paths. Keep input traces short, place the required input and bypass capacitors close to the device pins, and provide a clean return path between the analog source and the converter. Confirm the selected gain, conversion rate, and common-mode limits against the manufacturer datasheet before fixing the front-end amplifier network. This product page consolidates the MCP3422 family architecture, verified electrical characteristics, drop-in family alternatives, application guidance, and PCB implementation notes into a design-focused reference for engineers evaluating the MCP3422A6-E/MC.