بەرهەمەکان (3,600+)

AD976ACRS - 16-Bit 200 kSPS ADC | Analog Devices
AD976ACRS

AD976ACRS - 16-Bit 200 kSPS ADC | Analog Devices

The Analog Devices AD976ACRS is a high-speed, low-power 16-bit successive-approximation ADC operating from a single 5 V supply, with a throughput rate of 200 kSPS in a 28-lead SSOP package. Its switched-capacitor architecture and parallel output interface suit signal-processing systems that require deterministic conversion timing and direct digital data transfer. An ADC is an analog-to-digital converter, a semiconductor that converts a continuously varying analog voltage into a numerical value. Within the signal-chain hierarchy, the AD976ACRS belongs to the data-converter IC class and specifically to high-resolution, parallel-output successive-approximation ADCs. The AD976A family combines a 16-bit conversion word with a 200 kSPS sampling rate, making it suitable for precision instrumentation, industrial measurement, communications, and control systems. Key features include single 5 V operation, a switched-capacitor conversion architecture, selectable external or internal 2.5 V reference, an on-chip clock, and a high-speed parallel interface. The manufacturer identifies the converter as a BiCMOS device, combining bipolar circuitry with CMOS logic. Maximum power dissipation is 100 mW, making the part suitable for compact systems where converter power must remain controlled. The AD976ACRS accepts an analog input range of 0 to 5 V when operated from the specified single supply. The AD976A family is available in 28-lead SSOP and SOIC formats, while the closely related AD976 family offers a lower 100 kSPS throughput rate. An external 200 ohm resistor and 33.2 kohm resistor can provide offset-and-gain calibration in a single-supply system when the required application calls for external adjustment. Typical applications include industrial process-control equipment, digital instrumentation, waveform acquisition, communications receivers, and embedded measurement systems. The parallel bus can feed a microcontroller, FPGA, or dedicated data-capture logic, while the on-chip clock simplifies systems that do not require an external sampling clock. Analog input conditioning remains important because the ADC does not replace front-end amplification, filtering, or reference conditioning. Designers should follow the manufacturer pin-description table when assigning tracks and should place input, reference, and decoupling connections according to the AD976/AD976A datasheet layout guidance. Confirm signal range, conversion timing, reference stability, and output logic levels before fixing the clock and acquisition system. For applications requiring the faster 200 kSPS rate, use the AD976A rather than the 100 kSPS AD976.

RFQ پەیوەندی
AD976ACRSZ - 16-Bit 200 kSPS SAR ADC | Analog Devices
AD976ACRSZ

AD976ACRSZ - 16-Bit 200 kSPS SAR ADC | Analog Devices

Analog Devices AD976ACRSZ is a 16-bit successive-approximation analog-to-digital converter with a 200 kSPS throughput rate, one analog input, and a 28-pin SSOP package. It operates from a single 4.75 V to 5.25 V supply and is intended for applications requiring accurate conversion at moderate sampling rates. The converter uses a switched-capacitor architecture implemented with proprietary BiCMOS process technology. An ADC is a data-acquisition semiconductor that converts an analog voltage into a digital number for processing, measurement, or transmission. The AD976 belongs to the ADC category and the broader signal-conversion hierarchy: analog-to-digital converter, data-converter IC, signal-chain semiconductor. Its 16-bit resolution provides 65,536 possible code levels, while the single-channel architecture keeps the external signal path focused and manageable. The AD976A family combines a 16-bit resolution with a throughput rate of 200 kSPS. The AD976ACRSZ operates from a single 5 V supply over a 4.75 V to 5.25 V input range, and its specified operating temperature range is -40°C to +85°C. A single analog input and parallel output arrangement make the device suitable for instrumentation and embedded data-acquisition systems that can accept parallel digital data. Its switched-capacitor sampling architecture supports conversion of continuous analog signals without requiring a separate external sample-and-hold system. The proprietary BiCMOS implementation combines bipolar devices with CMOS transistors, supporting the analog input stage and digital conversion logic in one integrated circuit. According to the Analog Devices AD976 product information, the family is available in skinny 28-pin DIP, SSOP, and SOIC packages. Typical applications include industrial process monitoring, digital instrumentation, waveform analysis, communications equipment, and embedded measurement systems. The 200 kSPS rate supports acquisition of signals up to the converter's usable bandwidth, while the 16-bit word length suits precision measurement systems requiring finer quantization than an 8-bit or 12-bit converter. The primary design consideration is signal conditioning and reference stability. Keep the analog input within the specified range, provide clean supply and reference decoupling, and use appropriate source impedance and acquisition time for the selected sampling rate. PCB layout should minimize digital switching noise near the analog input and reference pins. This product overview combines the manufacturer's architecture and family information with package, temperature, interface, and sourcing details. It also organizes practical selection, application, and replacement guidance so engineers can evaluate the AD976ACRSZ against other AD976A-family converters without duplicating the full datasheet.

RFQ پەیوەندی
AD976ACRZ - 16-Bit 200 kSPS SAR ADC | Analog Devices
AD976ACRZ

AD976ACRZ - 16-Bit 200 kSPS SAR ADC | Analog Devices

Analog Devices AD976ACRZ is a 16-bit, 200 kSPS, single-input successive-approximation analog-to-digital converter operating from a single 5 V supply and housed in a 28-pin SOIC package. The converter combines a 16-bit resolution, 200 kSPS sampling rate, low power consumption, and parallel output interface in a surface-mount package suitable for industrial data-acquisition systems. A successive-approximation ADC, commonly abbreviated SAR ADC, converts an analog input into a digital code by repeatedly comparing the sampled input with an internal reference and successively refining a trial conversion. The AD976A belongs to the ADC → data-converter → signal-chain IC hierarchy. Its switched-capacitor internal architecture provides a practical balance among conversion speed, resolution, power use, and implementation complexity for instrumentation, industrial control, communications, and test-equipment designs. The AD976A family operates from a single 5 V supply and supports a throughput rate of 200 kSPS. According to Analog Devices, each converter includes a successive-approximation, switched-capacitor ADC together with associated control and interface circuitry. The AD976ACRZ ordering code identifies the 16-bit AD976A in a 28-pin SOIC configuration. Its industrial temperature grade makes it more appropriate for extended industrial environments than a consumer-grade option, although the exact rated temperature interval should be confirmed from the manufacturer datasheet before environmental qualification. The AD976 and AD976A are fabricated using Analog Devices' proprietary BiCMOS process, combining high-performance bipolar devices with CMOS transistors. This mixed-process approach supports the converter's analog input stage, reference-related functions, and digital control logic in one integrated circuit. The AD976A provides twice the throughput of the original AD976, increasing from 100 kSPS to 200 kSPS while retaining the same nominal 16-bit resolution and 5 V supply architecture. Typical uses include industrial process monitoring, digital instrumentation, data-acquisition modules, communications equipment, and control systems that require deterministic sampled-data conversion. Because the interface is parallel rather than serial, the converter requires careful routing of 16 output signals and attention to timing between the converter, data bus, and downstream digital circuitry. The wider SOIC footprint also offers more available board area than many compact surface-mount ADC packages. The primary design consideration is ensuring that the analog input, reference, supply, and digital outputs are arranged to minimize conversion errors and switching interference. Keep the analog input trace short, provide stable bypassing close to the supply pins, route digital outputs away from sensitive input nodes, and account for acquisition and conversion timing before registering the result in downstream logic. Validate the complete signal chain with the source impedance and sampling network recommended in the manufacturer documentation. This product record combines the manufacturer's AD976 family information with distributor package and sourcing details, practical signal-chain guidance, and a documented assessment of available drop-in alternatives. It is intended to help engineers establish whether the AD976ACRZ's 200 kSPS throughput, 16-bit resolution, 5 V operation, and 28-pin SOIC footprint fit a new or existing data-acquisition design.

RFQ پەیوەندی
AD976AN - 16-Bit 100 kSPS ADC | Analog Devices | Signal Acquisition
AD976AN

AD976AN - 16-Bit 100 kSPS ADC | Analog Devices | Signal Acquisition

The Analog Devices AD976AN is a high-speed, low-power 16-bit successive-approximation analog-to-digital converter with a 100 kSPS throughput rate, single 5 V supply operation, and a 28-pin PDIP package. It accepts an analog full-scale input range of ±10 V, includes an internal 2.5 V reference, and provides a high-speed parallel interface. An ADC is a data-acquisition semiconductor that converts an analog voltage into a digital code. The AD976 family uses a switched-capacitor SAR architecture, combining high sampling throughput with factory calibration intended to minimize linearity errors. Its role in the broader hierarchy is ADC > data converter > data-acquisition IC > semiconductor. The AD976A family supports 200 kSPS throughput, while the AD976 supports 100 kSPS throughput. The verified product-page search result identifies the AD976 as a 16-bit converter and confirms the 100 kSPS rate. Other verified features include single 5 V operation, ±10 V input range, internal or external 2.5 V reference selection, an on-chip clock, and a parallel output interface. Because the AD976AN is supplied in a 28-pin PDIP package, it is primarily suited to through-hole legacy, industrial, instrumentation, and educational designs rather than compact surface-mount assemblies. Its parallel bus can require 16 data traces plus control and interface signals, making board routing and input conditioning important design considerations. Typical applications include industrial process measurement, laboratory data-acquisition systems, instrumentation amplifiers, waveform capture, and legacy control equipment. The ±10 V input range can simplify interfacing with suitable sensor and amplifier stages, while the internal reference helps reduce external component count when sufficient accuracy is available. When selecting this part, verify the complete AD976AN datasheet, pinout, timing requirements, reference configuration, input bandwidth, and acquisition timing before layout. This page synthesizes the verified manufacturer information, distributor listing, package data, and design considerations for engineers evaluating the AD976AN.

RFQ پەیوەندی
AD976ANZ - 16-Bit 100kSPS SAR ADC | Analog Devices | 28-PDIP
AD976ANZ

AD976ANZ - 16-Bit 100kSPS SAR ADC | Analog Devices | 28-PDIP

The Analog Devices AD976ANZ is a 16-bit, 100 kSPS successive-approximation-register (SAR) analog-to-digital converter housed in a 28-pin PDIP (N-28) through-hole package, operating from a single 5 V supply. The device delivers 16-bit resolution with a single-ended analog input and a parallel digital interface, drawing approximately 100 mW of maximum power. The BiCMOS switched-capacitor architecture provides a wide input range and excellent AC/DC performance for industrial data-acquisition systems. An SAR ADC is a successive-approximation-register analog-to-digital converter that uses a binary search algorithm against an internal precision DAC to resolve N bits in N clock steps. SAR ADCs are a subtype of Nyquist-rate data converters that sit within the broader data acquisition IC category, which itself is part of the signal-chain and mixed-signal semiconductor hierarchy. Compared to delta-sigma ADCs, SAR converters offer lower latency, deterministic throughput, and no pipeline delay, which makes them preferable for multiplexed multi-channel acquisition and event-triggered sampling. Key features include 100 kSPS guaranteed throughput, single 5 V supply operation, internal 2.5 V reference (with external reference override), and analog input range of ±10 V when using proper input scaling. The AD976ANZ integrates a high-speed parallel interface that directly connects to 16-bit microprocessors and DSPs, and includes flexible analog input conditioning for unipolar (0 V to 5 V or 0 V to 10 V) and bipolar (±5 V or ±10 V) ranges using a single +5 V supply. Throughput latency is negligible, which is critical for closed-loop control and multiplexed systems. From an architecture standpoint, the AD976 and its higher-speed sibling AD976A share Analog Devices' proprietary BiCMOS process, combining bipolar precision devices with CMOS logic for low power and high accuracy. The device is offered in three pin-compatible packages - skinny 28-pin PDIP (this AD976ANZ variant), 28-pin SOIC, and 28-pin SSOP - giving designers flexibility for prototyping, volume production, or surface-mount reflow. Typical applications include industrial process control, multi-channel data acquisition boards, instrumentation front-ends, and medical monitoring equipment. The 100 kSPS throughput is well matched to multiplexed analog input cards that sequentially sample multiple 12- or 16-bit channels. The wide analog input range also suits vibration, strain, and pressure measurement systems where high common-mode rejection is needed. When designing with the AD976ANZ, place the analog input decoupling capacitor as close to the AIN pin as possible, maintain solid ground stitching between the analog and digital ground planes, and ensure the REFCAP pin is properly buffered with a 2.2 µF ceramic capacitor to minimize conversion noise. This page synthesizes distributor pricing, drop-in compatible variants, and practical PCB layout guidance not found in the manufacturer datasheet - including a same-package, same-pinout comparison against the AD976A 200 kSPS upgrade path.

RFQ پەیوەندی
AD976AR - 16-Bit 100 kSPS SAR ADC | Analog Devices
AD976AR

AD976AR - 16-Bit 100 kSPS SAR ADC | Analog Devices

The Analog Devices AD976AR is a 16-bit successive-approximation analog-to-digital converter with a 100 kSPS throughput rate, one single-ended input, and a 28-lead SOIC package. It operates from one 5 V supply, supports internal or external reference selection, includes an on-chip clock, and provides a high-speed parallel output interface. These characteristics make it a compact mixed-signal conversion component for industrial control, instrumentation, signal acquisition, communications, and embedded measurement systems. An ADC is an analog-to-digital converter, a semiconductor that transforms a continuous analog voltage into a numeric code. The AD976AR belongs to the successive-approximation, or SAR, ADC family. Unlike a pipeline ADC, a SAR ADC compares the sampled input against successive trial thresholds during a sequence of conversion cycles. Its sampled input, bit resolution, throughput, reference method, and parallel interface determine the balance between measurement speed, signal detail, circuit complexity, and downstream data handling. The AD976 family combines several conversion functions in one device. Its 16-bit resolution provides 65,536 possible code levels, while the AD976 version in this MPN operates at 100 kSPS. The AD976A family member reaches 200 kSPS, but it is not an interchangeable speed upgrade unless its complete pinout, timing, reference, and interface requirements are independently verified. Operation from a single 5 V supply simplifies system power planning, while internal or external reference choices support different accuracy and calibration strategies. The converter uses a switched-capperitor SAR architecture implemented with Analog Devices BiCMOS technology, combining bipolar and CMOS devices. Its internal 2.5 V reference can provide a self-contained conversion solution, while the external-reference option permits board-level reference selection. The high-speed parallel interface presents converted codes directly across digital output pins, making it suitable for logic devices, DSPs, microprocessors, or data latches capable of capturing the required output timing. Typical uses include closed-loop industrial process monitoring, low-frequency sensor digitization, laboratory measurement equipment, communications receivers, and embedded control systems. The 100 kSPS rate is appropriate for signals that do not require video-bandwidth conversion, while the 16-bit code width can preserve fine amplitude detail. Designers should verify input range, acquisition time, digital timing, output coding, reference requirements, and electrical limits against the manufacturer documentation before fixing the system architecture. A key design consideration is the relationship between sampling, acquisition, conversion, and output timing. The system must provide a stable input during the sample-and-hold interval and capture the parallel output according to the converter timing. The selected reference must satisfy the required accuracy, noise, temperature, and startup behavior, while external decoupling and grounding should follow the datasheet recommendations. This product record combines the verified manufacturer and distributor details with application guidance, design cautions, and a transparent distinction between verified specifications and unavailable data. It is intended to support initial engineering selection while avoiding unsupported assumptions about parameters, compliance, lifecycle guarantees, or replacement parts.

RFQ پەیوەندی
AD976ARS - 16-Bit 200 kSPS ADC | Analog Devices
AD976ARS

AD976ARS - 16-Bit 200 kSPS ADC | Analog Devices

Analog Devices AD976ARS is a 16-bit successive-approximation analog-to-digital converter with a 200 kSPS throughput rate, operating from a single 5 V supply and housed in a 28-pin SSOP package. The converter uses a switched-capacitor ADC architecture, includes an internal 2.5 V reference, and provides a high-speed parallel output interface. It is designed for acquisition systems requiring accurate 16-bit conversion at moderate sampling rates without the complexity of a high-power flash ADC. An ADC is a data-acquisition component that converts an analog voltage into a digital code. A successive-approximation ADC compares the input voltage with an internally generated reference through a sequence of trial conversions, then presents the final binary result through its digital interface. AD976/AD976A devices occupy the ADC position in a signal-chain hierarchy of sensor, signal-conditioning, ADC, digital processing, and system interface. The AD976A family provides a 200 kSPS conversion rate, while the closely related AD976 provides 100 kSPS. The AD976ARS is specified for single 5 V operation, factory calibration, and comprehensive DC and AC performance testing. Its internal 2.5 V reference reduces the need for an external reference circuit, while the parallel interface supports direct connection to digital control and processing logic. Typical uses include industrial process monitoring, instrumentation, communications, data acquisition, medical instrumentation, and embedded control systems. The 16-bit resolution supports a detailed representation of the measured analog signal, while the 200 kSPS rate permits sampling of slower industrial, audio, and control signals. The parallel interface requires adequate PCB routing and grounding discipline, particularly where digital switching activity could affect analog input accuracy. When designing around the AD976ARS, preserve the separation between analog and digital return paths, place input and reference-decoupling components close to the device, and account for the timing relationship between conversion start and output data. Use the manufacturer datasheet and pin-description table when assigning board traces. This page combines the product-family specifications, sourcing information, and engineering guidance needed to evaluate the AD976ARS in a new design.

RFQ پەیوەندی
AD976ARSZ - 16-Bit 100 kSPS SAR ADC | Analog Devices
AD976ARSZ

AD976ARSZ - 16-Bit 100 kSPS SAR ADC | Analog Devices

Analog Devices AD976ARSZ is a 16-bit, single-input successive-approximation analog-to-digital converter rated at 100 kSPS, supplied by a single 5 V rail and housed in a 28-pin SSOP package. Its 2.5 V internal reference, switched-capacitor conversion architecture, and high-speed parallel output interface make it suitable for precision signal acquisition systems requiring more resolution than ordinary 12-bit or 14-bit converters. An ADC is an interface IC that converts an analog voltage into a digital value. Within the broader semiconductor hierarchy, an ADC belongs to data converters and ultimately to interface ICs. The AD976 family uses successive-approximation conversion to acquire one analog channel, while the parallel digital interface transfers each 16-bit conversion result directly into a microprocessor, digital signal processor, FPGA, or data-capture system. The AD976ARSZ provides a resolution of 16 bits, a throughput rate of 100 kSPS, and operation from a single 5 V supply. Its internal 2.5 V reference reduces the need for an external precision reference in suitable designs. The device also uses a switched-capacitor ADC architecture, which supports repeatable conversion performance while imposing sampling and acquisition requirements on the source network. The SSOP package offers a compact surface-mount footprint and exposes the converter's digital outputs in parallel. Parallel interface design can simplify connections to older microprocessors and DSPs because no serial protocol converter is required. The trade-off is a larger pin count than a modern serial-interface ADC and potentially more routing on a high-density printed circuit board. Typical uses include industrial process monitoring, instrumentation, communications receivers, laboratory measurement equipment, and embedded control systems. The 16-bit resolution is particularly useful when the measured signal occupies much of the converter's input range, allowing smaller changes in voltage to be represented by distinct digital codes. Input bandwidth, acquisition time, reference accuracy, and the complete external analog front end must still be evaluated together. For reliable layout, place the input network, converter, and digital interface according to the manufacturer's recommended topology. Keep sensitive analog traces short, provide the required bypass capacitance at the supply pins, and route the high-speed digital outputs away from the analog input. Confirm that the signal source can charge the internal sample-and-hold capacitor within the available acquisition interval. This product record combines the manufacturer's family-level specifications, exact-orderable package information, sourcing fields, application guidance, and replacement analysis in a form that helps engineers plan signal-chain and PCB decisions before releasing a production design.

RFQ پەیوەندی
AD976ARZ - 16-Bit 100 kSPS SAR ADC | Analog Devices
AD976ARZ

AD976ARZ - 16-Bit 100 kSPS SAR ADC | Analog Devices

The Analog Devices AD976ARZ is a single-channel, 16-bit successive-approximation analog-to-digital converter with a sampling rate of 100 kSPS, operating from a single 5 V supply in a 28-pin SOIC package. It accepts a single-ended input and uses a high-speed parallel interface, while an integrated 2.5 V reference and on-chip clock reduce the external circuitry required for a complete conversion system. The converter is fabricated on a BiCMOS process that combines high-performance bipolar devices with CMOS transistors. An ADC is an analog-to-digital converter, a semiconductor that samples a continuous voltage and converts it into a numeric value for processing, storage, or transmission. The AD976 belongs to the successive-approximation ADC, or SAR ADC, family within the broader ADC and data-converter hierarchy. SAR converters repeatedly compare the sampled input against a generated reference and progressively determine each output bit. Their architecture is widely used where moderate conversion speed, accurate results, and a compact parallel interface are more important than very high sampling rates. The AD976 provides a 16-bit conversion resolution and a throughput rate of 100 kSPS. It operates from a single 5 V supply, accepts a single-ended analog input, and offers a parallel data interface. An internal 2.5 V reference and on-chip clock are integrated into the converter. According to Analog Devices, the AD976 and AD976A are factory calibrated and fully tested for signal-to-noise ratio and total harmonic distortion as well as offset, gain, and linearity characteristics. Maximum power dissipation is specified at 100 mW, allowing the converter to fit industrial, instrumentation, communications, and embedded-control systems without requiring a high-power thermal design. The AD976A member of the family reaches 200 kSPS, but the AD976ARZ specifically operates at 100 kSPS. This distinction is important when selecting a replacement because throughput is one of the key parameters used to determine drop-in compatibility. Typical uses include precision process measurement, industrial transducer acquisition, laboratory instrumentation, communications equipment, and embedded systems that need a parallel 16-bit conversion result. The 100 kSPS throughput supports waveforms and control loops that require substantially more resolution than a conventional 8-bit converter while avoiding the complexity and power requirements of a much faster high-speed ADC. When designing around the AD976ARZ, verify the analog input range, reference configuration, acquisition timing, and digital interface mapping against the manufacturer datasheet. Input conditioning should limit noise and establish a signal range compatible with the converter. PCB layout should keep the analog input path short and isolate parallel data routing from sensitive input nodes to reduce conversion error and digital coupling. This page consolidates the verified manufacturer and distributor information for AD976ARZ, including pricing, technical distinctions, package constraints, and selection guidance that are more useful for an engineering decision than a distributor title alone. It also distinguishes the confirmed 28-pin SOIC AD976AR option from faster AD976A and AD976B variants that cannot be treated as drop-in equivalents.

RFQ پەیوەندی
AD976ARZRL - 16-Bit 200 kSPS ADC | Analog Devices
AD976ARZRL

AD976ARZRL - 16-Bit 200 kSPS ADC | Analog Devices

Analog Devices AD976ARZRL is a 16-bit, single-input successive-approximation ADC with a 200 kSPS throughput rate, operating from a single 5 V supply and packaged in a 28-lead SOIC. It combines a 16-bit resolution, parallel data interface, and selectable internal or external reference in a device designed for moderate-speed precision signal acquisition. An ADC is a semiconductor that converts an analog voltage into a numerical value. The AD976 belongs to the converter hierarchy of data-conversion ICs, where its successive-approximation architecture samples an input and represents it using a 16-bit digital word. The AD976A variant provides a 200 kSPS throughput rate, while the original AD976 operates at 100 kSPS. Key features include 16-bit resolution, 200 kSPS throughput, single 5 V operation, one analog input, a parallel output interface, and the option to use an internal or external reference. The manufacturer describes the family as a low-power, high-speed converter implemented with a switched-capacitor, successive-approximation architecture and a proprietary BiCMOS process. The BiCMOS implementation combines high-performance bipolar devices with CMOS transistors. This supports the converter's sampling and accuracy functions while providing digital control and interface functions on the same integrated circuit. The parallel interface exposes the converted result directly through digital output pins, making this ADC suitable for systems where an 8-bit or 16-bit microcontroller bus, FPGA input, or dedicated digital logic can capture each conversion. Typical uses include industrial process monitoring, instrumentation, communications receivers, data acquisition modules, medical diagnostic equipment, and embedded control systems. Its 200 kSPS rate is appropriate for waveforms and supervisory signals that do not require the very high conversion rates of modern high-speed ADCs. Designers should verify input range, reference configuration, digital output timing, and logic levels against the manufacturer's pin-description and timing tables before layout. Decoupling should follow the datasheet recommendations, and the analog input path should be kept separate from high-current digital return paths to minimize conversion errors. This product page combines the exact family specifications, lifecycle considerations, sourcing guidance, package information, and application-focused engineering notes into a concise reference for evaluating the AD976ARZRL in precision acquisition designs.

RFQ پەیوەندی
AD976BN - 16-Bit 100kSPS ADC | Analog Devices | 28-PDIP
AD976BN

AD976BN - 16-Bit 100kSPS ADC | Analog Devices | 28-PDIP

The Analog Devices AD976BN is a 16-bit, 100 kSPS successive-approximation register (SAR) analog-to-digital converter operating from a single 5 V supply, housed in a 28-pin PDIP (skinny DIP) through-hole package. The part integrates a switched-capacitor SAR ADC core, an internal 2.5 V reference (selectable as external via the REF pin), and a high-speed parallel data interface with byte- and word-mode access, plus a single-ended analog input with input range up to ±10 V (with proper input scaling) or 0-4 V unipolar in default configuration. Background. A SAR ADC (successive-approximation register analog-to-digital converter) is a class of Nyquist-rate data converter that resolves one bit per internal clock cycle by comparing the sampled input against a binary-weighted internal DAC. SAR ADCs are valued for their deterministic latency, no-pipeline-delay sampling, and excellent DC linearity, making them a workhorse for industrial process control, instrumentation, and precision data acquisition. The AD976 family sits at the upper end of ADI's legacy 16-bit SAR portfolio and uses BiCMOS process technology that combines low-noise CMOS analog with bipolar drive for the internal reference and high-speed parallel bus. Key features include 100 kSPS throughput (the AD976A variant in the same family runs at 200 kSPS), 100 mW typical power dissipation from a single +5 V analog supply, internal 2.5 V reference with external override, a high-speed parallel interface configurable as 8-bit (byte mode) or 16-bit (word mode), on-chip clock, and selectable bipolar/unipolar analog input ranges. The bipolar BiCMOS process delivers low analog input current and excellent integral non-linearity (INL), suitable for precision measurement. Typical applications include industrial process control and instrumentation, data acquisition boards for legacy backplanes, medical instrumentation interfaces, and bench-top test equipment where deterministic SAR latency is preferred over pipelined ADCs. The single 5 V supply and parallel interface make it particularly well-suited for retrofits of older +5 V-only designs. When designing with this part, ensure the analog input is buffered by a low-impedance, low-noise op-amp (such as the AD845 or AD797 family) because the SAR's switched-capacitor input presents a transient kick-back at every conversion cycle. Decouple AVDD and DVDD separately, and place a 10 µF tantalum in parallel with a 0.1 µF ceramic adjacent to each supply pin. This page synthesizes current distributor pricing, drop-in 28-PDIP alternatives, application notes and PCB layout guidance not collected in any single source, so an engineer evaluating the AD976BN can make a sourcing and design decision in one pass.

RFQ پەیوەندی
AD976BNZ - 16-Bit 100 kSPS SAR ADC | Analog Devices
AD976BNZ

AD976BNZ - 16-Bit 100 kSPS SAR ADC | Analog Devices

The Analog Devices AD976BNZ is a 16-bit successive-approximation analog-to-digital converter with a 100 kSPS throughput rate, a single 5 V supply, parallel I/O, and a 28-pin through-hole DIP package. Its specified supply operating range is 4.75 V to 5.25 V, and the AD976 family also supports a 200 kSPS AD976A counterpart. An ADC is an interface IC that converts an analog voltage into a digital code for processing, storage, transmission, or control. The AD976 belongs to the successive-approximation ADC family, which repeatedly compares the input against a generated reference to resolve a digital result. This architecture sits within the broader ADC and data-converter hierarchy and is commonly used where moderate speed, resolution, and parallel data output are practical. Key features include 16-bit resolution, 100 kSPS throughput, one analog input, and a 5 V single-supply operating range. The manufacturer describes the converter as a high-speed, low-power switched-capacitor ADC. Parallel output reduces the need for a serial interface, while the 28-pin DIP package supports conventional through-hole assembly and prototyping. The industrial temperature grade makes the part relevant to industrial instrumentation, although a numerical temperature range is not present in the supplied data. The AD976 uses a successive-approximation, switched-capacitor architecture. Its parallel interface can connect directly to suitable digital acquisition hardware or an embedded system with appropriate voltage levels and timing. The manufacturer datasheet also describes 200 ohm and 33.2 kilohm external resistors used to compensate the internal offset and gain adjustment, allowing calibration with a single supply. These details distinguish calibration behavior from the ADC's core conversion specifications. Typical uses include industrial process-control instrumentation, laboratory data acquisition, digital panel meters, waveform measurement, and embedded control systems. The 16-bit resolution supports fine-grained representation of a measured voltage, while the 100 kSPS rate is appropriate for slow-changing or bandwidth-limited analog signals. It is not positioned as a high-frequency waveform converter compared with devices operating at hundreds of kilomegasamples per second or faster. Designers should preserve the specified 4.75 V to 5.25 V supply range, provide suitable reference and decoupling arrangements, and verify that the parallel interface timing is compatible with the receiving logic. Because only verified package, resolution, throughput, supply, architecture, and related-family information was available here, input range, SNR, INL, DNL, clock requirements, and absolute maximum ratings should be confirmed in the manufacturer datasheet before release to production. This page consolidates verified AD976 family specifications, current distributor sourcing, package details, and practical replacement guidance. It also separates confirmed AD976BNZ attributes from parameters that still require direct verification, helping engineers compare procurement choices without presenting unsupported electrical values as established facts.

RFQ پەیوەندی
AD976BR - 16-Bit 100 kSPS ADC | Analog Devices
AD976BR

AD976BR - 16-Bit 100 kSPS ADC | Analog Devices

The Analog Devices AD976BR is a 16-bit successive-approximation analog-to-digital converter with a 100 kSPS throughput rate, a single 5 V supply, and a 28-lead SOIC package. It provides one analog input, an internal 2.5 V reference option, a high-speed parallel interface, and an on-chip clock. The AD976 family is positioned for precision signal acquisition where 16-bit resolution and moderate conversion speed are required. The AD976A, in contrast, is identified in the manufacturer material as the 200 kSPS member of the same AD976/AD976A family. An ADC is an analog-to-digital converter, a semiconductor that transforms a continuously varying analog voltage into a numeric code. Within the broader hierarchy, an ADC is a data-acquisition and signal-conversion IC; a successive-approximation ADC performs conversion by comparing the input voltage with an internally generated DAC and successive trial bit decisions. This architecture provides a practical balance between conversion throughput, resolution, power consumption, and implementation complexity for industrial, communications, instrumentation, and embedded control systems. Key verified features of the AD976BR include 16-bit resolution, 100 kSPS throughput, one analog input, single 5 V operation, selectable external or internal 2.5 V reference, an on-chip clock, a high-speed parallel interface, and a maximum input range stated in the retrieved data as 100 mV. The manufacturer material also identifies low-power operation and both external and internal reference choices. The 28-lead SOIC package is confirmed by distributor and comparison listings. The AD976BR uses a switched-capacitor successive-approximation architecture. During conversion, the internal sample-and-hold network captures the input, while the comparison and DAC network determine successive code bits. Because the converter uses a parallel interface, the host system must capture or latch the 16-bit result and handle the associated digital timing. The AD976BR is therefore most useful when moderate sampling rates are sufficient but software-based or low-speed serial conversion would be inadequate. Typical applications include industrial process monitoring, sensor-interface systems, communications equipment, data-acquisition instruments, and embedded measurement platforms. The 100 kSPS rate is suitable for acquiring slowly changing or burst-sampled signals, while the 16-bit code width supports precision measurement and control. The single-supply architecture can simplify system design when a 5 V analog rail is already available, although input conditioning, reference stability, digital grounding, and timing remain important engineering concerns. When designing around the AD976BR, place input, reference, and decoupling connections according to the manufacturer datasheet and keep the analog input path away from high-current digital switching nodes. Check acquisition time, input impedance, source drive capability, reference configuration, and the host parallel-interface timing. Do not substitute a converter merely because its resolution matches; pin compatibility, sampling architecture, input range, reference behavior, and acquisition timing must also be verified. This page combines verified Analog Devices product information, distributor package and interface details, application guidance, comparison fields, and design notes. It also explicitly identifies where pricing, pinout, lifecycle, or replacement data are not present in the supplied web evidence.

RFQ پەیوەندی
AD976BRRL - 16-Bit 100 kSPS SAR ADC | Analog Devices
AD976BRRL

AD976BRRL - 16-Bit 100 kSPS SAR ADC | Analog Devices

Analog Devices AD976BRRL is a 16-bit, 100 kSPS successive-approximation analog-to-digital converter operating from a single 5 V supply in a 28-pin SOIC package. It uses a switched-capacitor BiCMOS architecture and a parallel data interface. The converter combines 16-bit resolution with a 100 kSPS sampling rate for instrumentation, industrial control, and signal-acquisition systems. An ADC is an analog-to-digital converter, a semiconductor that samples a continuously varying voltage and produces a corresponding digital code. The AD976 belongs to the successive-approximation ADC family, which compares the sampled input against a controlled reference and resolves each conversion bit in successive steps. Its switched-capacitor internal architecture supports accurate, repeatable conversion while allowing the device to operate from one 5 V supply. Key features include 16-bit resolution, 100 kSPS throughput, one analog input, a parallel interface, and operation from a single 5 V source. The AD976 family is fabricated using Analog Devices' proprietary BiCMOS process, combining bipolar components with CMOS circuitry. The manufacturer also offers a related AD976A family with 200 kSPS throughput, while AD976BRRL remains the 100 kSPS member. The parallel interface exposes the converted data directly across dedicated output pins, making the AD976BRRL suitable for systems where a microprocessor, digital signal processor, programmable logic device, or latch bank captures each conversion result. System timing must account for acquisition and conversion intervals, and the input driver must satisfy the converter's source-impedance requirements to allow the internal sampling network to settle accurately. Typical uses include industrial process monitoring, instrumentation, laboratory data acquisition, communications equipment, embedded measurement systems, and control loops that require precise digitization without the throughput of a much faster converter. The 28-pin SOIC package also supports compact analog and digital routing on conventional through-hole assembly boards. For reliable operation, use a clean 5 V supply and place the required bypass capacitors close to the device. Preserve the manufacturer's recommended analog and digital grounding arrangement, provide a low-impedance input source, and route the parallel output bus away from sensitive analog input traces. These measures reduce supply disturbance and switching-related conversion error. This product page organizes the AD976BRRL's conversion rate, resolution, interface, package, ordering information, and practical selection considerations. It also distinguishes the 100 kSPS AD976 from the faster 200 kSPS AD976A and identifies the verified drop-in alternatives that can be used without changing the 28-pin SOIC footprint.

RFQ پەیوەندی
AD976BRS - 16-Bit 100 kSPS SAR ADC | Analog Devices
AD976BRS

AD976BRS - 16-Bit 100 kSPS SAR ADC | Analog Devices

Analog Devices AD976BRS is a 16-bit successive-approximation analog-to-digital converter with a 100 kSPS throughput rate, operated from a single 5 V supply and housed in a 28-pin SSOP package. The converter combines a 16-bit sampling ADC, an internal 2.5 V reference, an on-chip clock, and a high-speed parallel output interface. An ADC is a semiconductor that converts an analog voltage into a digital number. Within the signal-chain hierarchy, the AD976BRS belongs to the ADC category, uses the successive-approximation, or SAR, architecture, and forms part of a data-acquisition system that ultimately delivers binary values to a processor, FPGA, or digital controller. Its parallel interface provides a direct, high-throughput path for transferring each 16-bit conversion result. The AD976BRS operates from a single 5 V supply and supports analog input signals extending to 100 mV, making it suitable for low-level measurement systems. Its internal 2.5 V reference can be used directly or supplemented by an external reference when system-level calibration requires additional flexibility. Maximum power dissipation is 100 mW, which supports compact, low-power data-acquisition designs without requiring a large thermal solution under specified operating conditions. Internally, the device is a switched-capacitor SAR converter. During conversion, its internal successive-approximation network compares the sampled input against a generated reference and progressively resolves the result to 16-bit resolution. The BiCMOS process combines bipolar circuitry with CMOS logic, supporting the converter's high-speed parallel architecture while retaining low power consumption. The manufacturer also describes factory offset-and-gain adjustment with external 200 ohm and 33.2 kilohm resistors for single-supply calibration. Typical uses include industrial process measurement, instrumentation, communications, control systems, and signal-analysis equipment where a 100 kSPS sampling rate and parallel output are appropriate. The AD976 is also used in data-acquisition boards and embedded measurement instruments. For designs requiring greater sampling throughput, the related AD976A family provides a 200 kSPS option according to the manufacturer product page. Designers should preserve the analog input path's low noise and settling behavior because a SAR ADC samples the input at the beginning of each conversion. Place input and reference decoupling capacitors close to their associated pins, use a clean analog ground strategy, and route the 16-bit parallel bus away from switching nodes. Confirm timing against the selected clock and interface implementation before finalizing the PCB layout. This page combines the manufacturer's AD976 family information with practical interface, calibration, and PCB guidance. It also identifies the important distinction between the AD976BRS 100 kSPS version and the 200 kSPS AD976A family member while keeping replacement recommendations constrained to verified, package-compatible candidates.

RFQ پەیوەندی
AD976BRZ - 16-Bit 100 kSPS SAR ADC | Analog Devices
AD976BRZ

AD976BRZ - 16-Bit 100 kSPS SAR ADC | Analog Devices

The Analog Devices AD976BRZ is a 16-bit, single-channel successive-approximation analog-to-digital converter with a 100 kSPS sampling rate, operated from a single 5 V supply and housed in a 28-pin SOIC package. Its principal operating characteristics are 16-bit resolution, 100 kSPS throughput, a 4.75 V to 5.25 V analog supply range, and a 100 mW maximum power dissipation. An ADC is a data-acquisition interface that converts a continuously varying analog voltage into a numeric value for processing, storage, or transmission. The AD976 belongs to the successive-approximation ADC hierarchy within mixed-signal semiconductors. It uses a switched-capacitor internal architecture, an internal 2.5 V reference, and a high-speed parallel digital interface to provide deterministic conversion results in instrumentation and signal-processing systems. Key features include 16-bit resolution, a 100 kSPS throughput rate, single-ended analog input, a 5 V analog supply, and parallel data output. The internal reference reduces the number of external precision components required for basic converter operation. The manufacturer datasheet also describes external offset and gain calibration using 200 ohm and 33.2 kilohm resistors, allowing system-level calibration when operating from a single supply. The AD976 uses a successive-approximation, switched-capper architecture implemented with Analog Devices proprietary BiCMOS technology. The BiCMOS process combines high-performance bipolar devices with CMOS transistors, supporting the internal reference, sampling network, and parallel interface. The AD976A family shares this architecture but offers a 200 kSPS throughput rate, so it is not a parameter-equivalent drop-in choice for a design specifically requiring the 100 kSPS AD976. Typical uses include industrial measurement, instrumentation, signal acquisition, data logging, and embedded control systems that accept single-ended analog inputs. It is especially relevant where a 16-bit conversion result, parallel data bus, and moderate sampling rate are more useful than the maximum throughput of a high-speed flash or pipeline converter. Designers should use a suitable acquisition, reference, and decoupling network around the converter and account for analog input settling time before sampling. Because the AD976BRZ uses a 28-pin SOIC package, its footprint is relatively large compared with modern fine-pitch mixed-signal packages. The verified source set does not expose the complete pin names, so this page does not reproduce an unverified pin assignment. This page combines verified manufacturer specifications, distributor availability, application guidance, and procurement information. It also distinguishes the 100 kSPS AD976BRZ from the faster AD976A, preventing a speed-related substitution from being presented as a true drop-in replacement.

RFQ پەیوەندی
AD976CN - 16-Bit 100 kSPS BiCMOS ADC | Analog Devices
AD976CN

AD976CN - 16-Bit 100 kSPS BiCMOS ADC | Analog Devices

The Analog Devices AD976CN is a 16-bit, 100 kSPS successive-approximation BiCMOS analog-to-digital converter operating from a single 5 V supply and housed in a 28-lead ceramic DIP package. The converter accepts one single-ended input and uses a high-speed parallel interface for direct digital data transfer. Its family supports selectable external or internal 2.5 V references and includes an on-chip clock. An ADC is an analog-to-digital converter, a data-acquisition IC that transforms a continuously varying voltage into a numeric code for processing, storage, or control. The AD976 belongs to the successive-approximation ADC hierarchy within integrated circuits and data-conversion semiconductors. At 100 kSPS and 16-bit resolution, it balances conversion speed with precision while preserving a straightforward parallel-output architecture. The AD976CN's headline parameters are its 16-bit resolution, 100 kSPS conversion throughput, and single 5 V supply operation. According to the Analog Devices AD976 product page, the closely related AD976A reaches 200 kSPS, while the AD976 is specifically identified as the 100 kSPS member. The family also supports external or internal 2.5 V references, a feature that gives designers flexibility in establishing full-scale conversion range. The BiCMOS implementation combines bipolar and CMOS process characteristics to support precision sampling, comparison, and digital output functions. Maximum power dissipation is listed as 100 mW, while typical power-supply current is specified at 14 mA under stated conditions. The converter uses a parallel data interface, which can simplify connection to older digital buses and dedicated data-acquisition controllers when timing and bus-width constraints are managed correctly. Typical uses include industrial process monitoring, instrumentation, digital measurement equipment, waveform acquisition, and embedded control systems. Its single-ended input architecture is useful when the source can be referenced and scaled to the selected input range. The internal or external 2.5 V reference choice also makes the ADC suitable for laboratory and industrial systems where traceability or system-level reference partitioning affects measurement accuracy. When designing around the AD976CN, preserve the manufacturer's recommended analog and digital grounding and decoupling arrangements, and account for acquisition, conversion, and output-update timing at the system level. The 28-lead DIP package is less common in new high-density assemblies, so designers should verify connector availability and assembly process requirements before committing the footprint. Because the verified data identifies AD976CN as obsolete or EOL, lifecycle planning and sourcing risk are significant selection considerations. This page consolidates the verified manufacturer specifications, lifecycle information, sourcing context, and design implications for AD976CN. It also distinguishes verified facts from parameters that remain unavailable in the supplied data, helping engineers evaluate legacy replacements without assuming unverified electrical or pin-level compatibility.

RFQ پەیوەندی
AD976CNZ - 16-Bit 100kSPS BiCMOS ADC | Analog Devices
AD976CNZ

AD976CNZ - 16-Bit 100kSPS BiCMOS ADC | Analog Devices

The Analog Devices AD976CNZ is a 16-bit, 100 kSPS successive-approximation analog-to-digital converter in a 28-pin PDIP (N-28) through-hole package. It operates from a single 5 V supply (4.75 V to 5.25 V), accepts input ranges of ±10 V, 0-10 V, and 0-4 V, and delivers 100 mW typical power dissipation, suiting it to industrial instrumentation, data acquisition, and process control front ends. An ADC (analog-to-digital converter) is a mixed-signal integrated circuit that converts a continuous-time, continuous-amplitude analog input into a discrete-time, discrete-amplitude digital codeword. Within the broader signal-chain taxonomy, an ADC belongs to data converters, which sit alongside DACs (digital-to-analog converters) in mixed-signal ICs. Successive-approximation-register (SAR) ADCs use a binary-search algorithm and an internal precision DAC to converge on the input voltage in N clock cycles, achieving high resolution at moderate sampling rates with very low latency and zero pipeline delay. Key features include 16-bit resolution, 100 kSPS throughput, a parallel data interface, single 5 V supply operation, and an internal 2.5 V reference. The device is specified over the -40 °C to +85 °C industrial temperature range, uses a switched-capacitor input architecture, and dissipates only 100 mW maximum. The 28-pin PDIP (N-28) package simplifies prototyping and breadboarding in laboratory and factory-floor applications where socketed through-hole parts are preferred. Architecture-wise, the AD976 employs BiCMOS process technology, combining bipolar precision analog blocks with CMOS logic for the SAR engine and output latches. The BiCMOS integration reduces analog-domain noise while keeping digital control current low, supporting the part's 100 mW dissipation budget at full throughput. An external or internal reference option allows designers to trade absolute accuracy against system cost. Typical applications include industrial process control, multichannel data-acquisition systems, portable instrumentation, and PC/embedded signal-conditioning front ends. The single-5 V supply and parallel interface make it easy to interface to legacy microcontrollers, DSPs, and FPGAs without level translation. When designing with the AD976CNZ, observe the input-common-mode and acquisition-time requirements; an external input buffer amplifier is normally required to drive the switched-capacitor input. Use a low-impedance ground plane and decouple AVCC and DVCC separately to preserve the converter's 16-bit linearity. This page synthesizes distributor pricing, drop-in same-family and cross-brand equivalents, and practical design notes not found in the bare manufacturer datasheet, helping engineers source and qualify the AD976CNZ quickly.

RFQ پەیوەندی
AD976CR - 16-Bit 100 kSPS SAR ADC | Analog Devices
AD976CR

AD976CR - 16-Bit 100 kSPS SAR ADC | Analog Devices

Analog Devices AD976CR is a high-speed, low-power, 16-bit successive-approximation analog-to-digital converter with a 100 kSPS throughput rate, a single 5 V supply, and a 28-lead SOIC package. The converter includes an internal 2.5 V reference, an on-chip clock, a high-speed parallel interface, and the choice of an external or internal reference. A successive-approximation ADC, or SAR ADC, is a sampling data-converter type that successively compares the sampled input voltage with a controlled reference and produces one digital bit per comparison cycle. Within the broader data-conversion hierarchy, the AD976CR belongs to the ADC and data-acquisition IC category, where its combination of 16-bit resolution, 100 kSPS throughput, and parallel output provides a practical balance between conversion speed, accuracy, interface simplicity, and power consumption. Key features include 16-bit resolution, 100 kSPS operation for the AD976 version, single 5 V supply operation, an internal 2.5 V reference, a high-speed parallel interface, and low-power operation. The parallel interface exposes the converted code directly on digital output pins, making it suitable for systems in which the receiving logic can capture data at the converter's supported rate. The AD976 family also permits use of an external reference when greater reference control is required. The AD976CR uses a switched-capacitor SAR conversion architecture. Its on-chip clock supports the digital conversion sequence, while the parallel output avoids requiring a serial link in the immediate sampling path. This architecture is appropriate for industrial control, instrumentation, communications, and embedded measurement systems that require deterministic sampling and moderate throughput without the complexity of a high-speed pipeline or flash ADC. Typical uses include industrial process monitoring, laboratory data acquisition, communications equipment, digital instrumentation, and embedded control systems. For audio, communications, or precision measurement, engineers should review the manufacturer's complete data sheet for input bandwidth, settling behavior, reference requirements, and source-impedance limitations before fixing the sampling architecture. When designing around the AD976CR, allow adequate settling time for the source network and external reference, preserve the required analog and digital return paths, and use a low-noise 5 V supply. The 28-lead SOIC footprint supports conventional surface-mount assembly, but high-speed layout still demands short traces and careful separation between analog input, reference, and digital output nets. This product record combines the verified manufacturer overview, distributor identification, pricing references, and practical engineering guidance in one searchable reference. It also distinguishes confirmed AD976CR characteristics from unverified parameters so engineers can identify what must be checked against the official datasheet before design release.

RFQ پەیوەندی
AD976CRS - 16-Bit 100 kSPS ADC | Analog Devices | SSOP
AD976CRS

AD976CRS - 16-Bit 100 kSPS ADC | Analog Devices | SSOP

The Analog Devices AD976CRS is a 16-bit successive-approximation analog-to-digital converter with a throughput rate of 100 kSPS, single 5 V operation, and a 28-lead SSOP package. It accepts a 100 mW maximum input range and supports either an external or internal 2.5 V reference. The device also includes a high-speed parallel output interface and an on-chip clock, making it suitable for precision signal-acquisition systems that require accurate conversion and rapid parallel data transfer. An ADC is an interface IC that converts an analog voltage into a digital code. The AD976 belongs to the successive-approximation ADC family, which repeatedly compares the sampled input with a reference-controlled internal DAC. It sits between sensors, instrumentation amplifiers, and industrial signal sources on one side and digital processors, field buses, and data-acquisition systems on the other. Its parallel interface transfers each 16-bit result directly rather than serializing the data through a communications link. Key features include 16-bit resolution, 100 kSPS throughput, operation from a single 5 V supply, a 100 mW maximum input range, and selectable external or internal 2.5 V reference. The high-speed parallel interface reduces the time required to move conversion results into digital circuitry, while the on-chip clock provides a convenient timing source. The AD976CRS also permits the 100 kSPS AD976 and 200 kSPS AD976A functions to share a common converter family and package family. The converter uses a switched-capacitor, successive-approximation architecture. Its internal reference option supports self-contained analog-to-digital conversion, while the external reference option allows the measurement accuracy to track a higher-quality voltage source. The parallel data interface is especially useful when samples must be captured quickly or transferred into parallel-processing logic without the overhead of a serial frame. Typical applications include industrial process monitoring, instrumentation, digital oscilloscopes, data-acquisition instruments, communications receivers, and precision measurement systems. The 100 kSPS rate supports continuously sampled waveforms while maintaining a relatively simple parallel-data implementation. The 28-lead SSOP package is also suitable for compact analog and mixed-signal equipment where board area and external component count matter. The main design consideration is reference and interface implementation. Use the manufacturer pin-description table when assigning the 28 signal and power pins, place bypass capacitors close to the supply pins, and ensure the external clock, reference, and digital output timing meet the required acquisition sequence. The input range and full-scale calibration should be established together because converter code accuracy depends on both the analog signal and the reference voltage. This page organizes the core AD976CRS specifications, sourcing options, engineering guidance, and pin-compatible family alternatives. It helps engineers evaluate the converter by throughput, resolution, supply voltage, reference architecture, and package rather than relying on a basic product identifier alone.

RFQ پەیوەندی
AD976CRZ - 16-Bit 100 kSPS SAR ADC | Analog Devices
AD976CRZ

AD976CRZ - 16-Bit 100 kSPS SAR ADC | Analog Devices

The Analog Devices AD976CRZ is a 16-bit, 100 kSPS successive-approximation analog-to-digital converter with one analog input, a high-speed parallel output interface, and a 28-pin SOIC package. It operates from a single 5 V supply and uses an internal 2.5 V reference. The converter combines switched-capacitor sampling and successive-approximation conversion to provide a direct digital representation of an analog input while keeping system power requirements comparatively low. An ADC is an interface IC that converts a continuously varying analog voltage into a digital code. Within the broader semiconductor hierarchy, the AD976 is a data-conversion IC within the ADC/DAC category. Its 16-bit resolution provides 65,536 possible digital codes, while the 100 kSPS throughput supports applications that require accurate conversion without the conversion time associated with lower-rate general-purpose data converters. Key features of the AD976CRZ include 16-bit resolution, a 100 kSPS maximum throughput rate, single-supply 5 V operation, an internal 2.5 V reference, and a parallel output interface. The architecture supports acquisition systems, communications equipment, instrumentation, and industrial control applications where the sampled analog signal must be presented to downstream logic or a digital processor. Internally, the AD976 uses a switched-capacitor successive-approximation ADC. The sampling network captures the analog input before the conversion process compares successive bit decisions. The manufacturer documentation identifies an internal 2.5 V reference and describes external 200 ohm and 33.2 kilohm resistors that provide offset and gain compensation for the single-supply configuration. These compensation components are functional parts of accurate system implementation rather than optional signal-conditioning accessories. Typical uses include communications receivers, data-acquisition modules, industrial measurement systems, digital audio and control equipment, and embedded processing platforms. The parallel interface can reduce output multiplexing complexity compared with serial converters when the receiving system can provide enough digital input connections and acquire the converted code at the supported rate. Circuit implementation requires careful attention to analog signal conditioning, reference behavior, digital timing, and the ADC supply. Input and output transitions should be controlled so that switching activity does not degrade conversion accuracy, while the manufacturer's compensation values and recommended layouts should be followed exactly. The AD976CRZ is also offered in related AD976 and AD976A families, but the AD976A doubles the stated throughput to 200 kSPS and should not be treated as an automatic drop-in replacement. This product page combines verified manufacturer and distributor data, package information, pricing context, application guidance, and engineering selection notes. It also distinguishes the AD976's 100 kSPS rating from the faster AD976A, helping engineers identify whether a related converter changes system timing or requires additional validation.

RFQ پەیوەندی
AD977AAN - 16-Bit 200 kSPS BiCMOS ADC | Analog Devices
AD977AAN

AD977AAN - 16-Bit 200 kSPS BiCMOS ADC | Analog Devices

Analog Devices AD977AAN is a 16-bit successive-approximation analog-to-digital converter with a 200 kSPS throughput rate, single 5 V operation, and a 20-pin through-hole DIP package. It accepts unipolar input ranges of 0–5 V and 0–4 V or bipolar input ranges of ±5 V and ±3.3 V, making it suitable for precision signal acquisition, industrial instrumentation, communications, and data-acquisition systems. An ADC is an interface IC that converts continuous analog voltages into digital codes for processing by a microcontroller, DSP, FPGA, or communications system. The AD977A belongs to the successive-approximation ADC hierarchy, using a comparator, internal DAC, and successive conversion stages to balance conversion speed, resolution, power consumption, and implementation complexity. It is designed for accurate digitization of moderately high-frequency signals rather than waveform capture at megahertz rates. The AD977AAN provides 16-bit resolution, a 200 kSPS maximum throughput rate, and operation from a single 5 V supply. Maximum power dissipation is listed at 100 mW, while power-down operation reduces consumption when the converter is not sampling. Selectable unipolar and bipolar input ranges allow the same converter architecture to serve sensors, transducer outputs, and conditioned analog signals. An external reference and external clock options support flexible system timing and calibration. Internally, the device uses a BiCMOS implementation that combines bipolar and CMOS circuitry. The AD977 part in the family supports 100 kSPS throughput, whereas the AD977A supports 200 kSPS. This distinction is important during replacement because the faster AD977A should not be treated as electrically identical to the 100 kSPS AD977 when acquisition timing or digital-interface timing is fixed by the host processor. Typical uses include multichannel process-control instrumentation, programmable logic controllers, communications receivers, laboratory measurement equipment, and embedded data-acquisition systems. The 20-pin DIP format also supports prototyping and automated test systems where through-hole insertion and socketed assembly are preferred over fine-pitch surface-mount packages. Designers should establish analog signal conditioning before the converter, use a clean reference source, and account for acquisition time when initiating each conversion. The input network, grounding, reference routing, and digital interface require careful layout to prevent noise or switching activity from degrading the 16-bit result. A parallel data interface also requires suitable bus timing and signal-integrity review at the connected processor. This product page combines manufacturer specifications, package information, application guidance, a structured engineering comparison, and practical design notes. It is intended to help engineers confirm interface compatibility, evaluate acquisition timing, and determine whether the AD977AAN satisfies a system’s resolution, input-range, supply, and mechanical requirements.

RFQ پەیوەندی
AD977AANZ - 16-Bit 200 kSPS SAR ADC | Analog Devices
AD977AANZ

AD977AANZ - 16-Bit 200 kSPS SAR ADC | Analog Devices

The Analog Devices AD977AANZ is a 16-bit, single-input successive-approximation analog-to-digital converter with a throughput rate of 200 kSPS. It operates from a single 5 V supply and is packaged in a 20-pin PDIP. The converter includes a switched-capacitor sampling architecture, an internal 2.5 V reference, a high-speed serial interface, and factory calibration designed to minimize offset, gain, and nonlinearity errors. A successive-approximation register, or SAR, ADC is a type of analog-to-digital converter that compares the sampled input voltage against a series of internal trial voltages. The SAR architecture combines moderate conversion speed with relatively low power, making it appropriate for precision industrial measurement, control, instrumentation, and signal-acquisition systems where a 200 kSPS sampling rate is sufficient. The AD977AANZ provides 16-bit nominal resolution, one analog input, and a 200 kSPS throughput rate. Its single 5 V supply simplifies system power design, while the internal 2.5 V reference supports standalone operation when an external precision reference is not required. The serial interface reduces the number of package pins needed for data transfer and is suitable for connecting the converter to a microcontroller, DSP, FPGA, or other digital acquisition controller. Factory calibration is an important technical feature because it reduces the need for board-level offset and gain correction. The converter remains a sampled-data system, so front-end settling time, source impedance, input filtering, reference stability, and digital clock quality influence the usable accuracy. Designers should therefore treat the analog input and reference paths as precision signal paths rather than ordinary utility connections. Typical uses include industrial process-control loops, multichannel measurement systems when several AD977AANZ devices are combined, factory automation equipment, laboratory instrumentation, data acquisition, and embedded control products. The 200 kSPS rate supports rapidly changing process variables while keeping power and implementation complexity below high-speed flash-converter designs. The primary design tradeoff is conversion throughput versus resolution and implementation complexity. AD977AANZ provides more usable resolution and simpler integration than many lower-rate converters, but it cannot match the multi-megahertz sampling rates of modern flash ADCs. Validate the source impedance, acquisition time, reference arrangement, digital interface timing, and thermal conditions before fixing the production design. This page combines the manufacturer specifications, package and interface details, verified drop-in options, and practical implementation guidance needed to evaluate the AD977AANZ for precision data-acquisition and industrial-control designs.

RFQ پەیوەندی
AD977AAR - 16-Bit 200 kSPS Serial ADC | Analog Devices
AD977AAR

AD977AAR - 16-Bit 200 kSPS Serial ADC | Analog Devices

The Analog Devices AD977AAR is a 16-bit successive-approximation analog-to-digital converter with a 200 kSPS throughput rate, single 5 V supply operation, and a 20-lead SOIC package. It is designed for high-speed serial data acquisition where low power, compact implementation, and flexible input ranges are important. An ADC is a semiconductor that converts an analog voltage into a digital number for processing, measurement, or transmission. The AD977AAR belongs to the ADC and data-converter hierarchy, where its 16-bit resolution provides 65,536 nominal code levels. Its serial interface reduces the number of signal connections compared with a parallel converter and is appropriate for systems that transfer converted samples to a controller, DSP, FPGA, or communications equipment. The AD977AAR provides selectable unipolar and bipolar input ranges, including 0 to 5 V and 0 to 4 V unipolar ranges and 5 V and 3.3 V bipolar ranges. It operates from a single 5 V supply and includes a power-down mode. The manufacturer identifies the AD977AAR as the 200 kSPS member of the AD977 and AD977A family; the AD977 has a 100 kSPS throughput rate. Its low-power design is intended for compact instrumentation and control systems where converter power dissipation must remain controlled. The converter uses a successive-approximation architecture with an internal sample-and-hold function. External reference and interface circuitry determine the complete analog signal-chain implementation, while the serial output transfers each conversion result to the receiving digital system. The 20-SOIC package provides a conventional surface-mount form factor suitable for industrial and embedded equipment. Typical applications include process-control instrumentation, data-acquisition systems, industrial measurement equipment, communications receivers, medical monitoring equipment, and embedded control systems. The AD977AAR is especially appropriate when the design requires 16-bit conversion resolution, a 200 kSPS sampling capability, serial output, and operation from a single 5 V supply. When designing around the AD977AAR, verify the selected input range against the signal source, reference voltage, serial clock arrangement, digital interface levels, and acquisition timing. Confirm that the external front-end can drive the converter input without exceeding the datasheet input limits. Use the manufacturer’s pin-description table and timing diagrams when assigning PCB traces and validating conversion latency. This page organizes the manufacturer specifications, package information, application guidance, pricing workflow, and replacement considerations for engineers evaluating the AD977AAR in a new or existing data-acquisition design.

RFQ پەیوەندی