بەرهەمەکان (970+)

ADF4360-1BCP - 2250 MHz Integer-N VCO Synthesizer | Analog Devices
ADF4360-1BCP

ADF4360-1BCP - 2250 MHz Integer-N VCO Synthesizer | Analog Devices

Analog Devices ADF4360-1BCP is an integrated integer-N frequency synthesizer with a voltage-controlled oscillator, designed around a 2250 MHz center frequency and supplied in a 24-lead LFCSP exposed-pad package. It provides a 1025 MHz to 1225 MHz RF output when the divide-by-2 function is selected, operates from a 3.6 V power supply, and supports 1.8 V-compatible logic. An integer-N frequency synthesizer is a phase-locked-loop device that locks a voltage-controlled oscillator to a stable reference frequency. It combines a frequency synthesizer, VCO, programmable integer divider, and reference-control functions into one RF component. Within the broader hierarchy, the ADF4360-1BCP is a PLL and frequency synthesizer, then a clock-and-timing IC, and finally a semiconductor for RF signal generation and frequency control. Key features include fully integrated integer-N operation, programmable output power, a three-wire serial programming interface, digital lock detection, and hardware and software power-down modes. The 3.6 V supply and 1.8 V logic compatibility simplify connections to low-voltage control systems. The divide-by-2 option is valuable when a lower RF frequency is required without adding a separate output divider. The device uses a closed-loop architecture to control its VCO through a reference clock and integer divider. Designers program the operating configuration through the serial interface, while lock detect provides a digital status indication that can be monitored by a host controller or used in system-level fault handling. Power-down modes reduce activity where the RF output is not required. Typical uses include local oscillator generation for wireless receivers and transmitters, frequency conversion in RF communication equipment, test and measurement instruments, and clock or carrier generation for industrial and consumer systems. Its 2250 MHz VCO center frequency and divide-by-2 output make it particularly relevant to 2.4 GHz RF signal-chain designs. Layout is critical because the VCO must remain stable while the synthesizer changes frequency. Follow the manufacturer reference layout, keep the VCO output path compact, place decoupling and loop-filter components close to their designated pins, and provide a continuous ground return through the exposed pad. Confirm lock, output power, spur performance, and supply sequencing during bring-up.

RFQ پەیوەندی
ADF4360-1BCPRL - 2.25GHz Integer-N VCO | Analog Devices
ADF4360-1BCPRL

ADF4360-1BCPRL - 2.25GHz Integer-N VCO | Analog Devices

The Analog Devices ADF4360-1BCPRL is an integrated integer-N frequency synthesizer and voltage-controlled oscillator designed for a 2250 MHz center frequency, with a 65 MHz to 400 MHz output range and a divide-by-2 option producing 1025 MHz to 1225 MHz. The device is housed in a 24-lead LFCSP/WFQFN exposed-pad package and operates from a 3.6 V supply with 1.8 V logic compatibility. An integer-N frequency synthesizer generates an output frequency by phase-locking an internal voltage-controlled oscillator to a stable reference. This ADF4360-1 family integrates the VCO, phase-locked loop, programmable output power, and fanout functions into one RF component, reducing the number of external RF assemblies required in wireless transmitter and receiver designs. The divide-by-2 output path provides an additional frequency range without requiring a separate RF divider. Key features include an RF output range of 65 MHz to 400 MHz, a 3.6 V power supply, 1.8 V-compatible logic, programmable output power, a three-wire serial interface, digital lock detection, and hardware and software power-down modes. The integrated structure supports controlled RF output and system power management while preserving a compact 4 mm by 4 mm package footprint. The synthesizer uses an integer-N architecture to generate an RF output from a reference frequency. A three-wire serial interface programs the frequency and operating parameters, while digital lock detection provides a status indication for supervisory logic. The exposed thermal pad under the 24-lead package improves heat transfer, but the design must maintain adequate copper area and thermal flow to avoid excessive junction temperature. Typical applications include cellular and RF baseband equipment, wireless local-area network transmitters, test and measurement instruments, and other RF signal-chain systems requiring programmable frequency generation. Its integrated VCO is especially useful where component count, PCB area, and repeatability of the RF output path are important design priorities. The main design consideration is power delivery and layout quality. Place the decoupling capacitor at the supply pins, follow the reference and loop-filter connection guidance in the manufacturer datasheet, and use a continuous ground reference beneath the exposed pad. Validate lock behavior, unwanted-signal levels, and thermal performance across the intended reference and output-frequency ranges. This product record combines the manufacturer’s device information with practical interface, thermal, and replacement guidance. It also distinguishes confirmed package-compatible options from variants that differ in frequency band or production status, helping designers evaluate board reuse without treating every related synthesizer as an equivalent drop-in part.

RFQ پەیوەندی
ADF4360-1BCPZ - 2.45 GHz Integer-N PLL VCO | Analog Devices
ADF4360-1BCPZ

ADF4360-1BCPZ - 2.45 GHz Integer-N PLL VCO | Analog Devices

The Analog Devices ADF4360-1BCPZ is a fully integrated integer-N frequency synthesizer and voltage-controlled oscillator for RF applications, with a 2050 MHz to 2450 MHz output-frequency range and a divide-by-2 output option covering 1025 MHz to 1225 MHz. The device operates from a 3.0 V to 3.6 V power supply, supports 1.8 V logic compatibility, and is packaged in a 24-WFQFN exposed-pad CSP. An integer-N PLL frequency synthesizer generates a stable, programmable RF output by comparing a divided feedback signal with a reference and driving an internal voltage-controlled oscillator. The ADF4360-1 integrates the PLL, VCO, reference divider, feedback divider, and associated control functions, reducing board space and implementation effort compared with a discrete synthesizer implementation. The principal operating characteristics are a 2050 MHz to 2450 MHz synthesis range, divide-by-2 operation from 1025 MHz to 1225 MHz, and a 3.0 V to 3.6 V supply range. The package includes an exposed pad for improved thermal performance, while the 1.8 V-compatible digital interface helps simplify control from low-voltage system logic. The ADF4360-1 is intended for RF signal generation where a programmable local oscillator is required. Its integrated PLL and VCO allow frequency selection through the device control interface, and the divide-by-2 output can provide a lower-frequency signal from the same synthesizer when the system does not require the full upper tuning range. Typical uses include wireless communication equipment, test and measurement instruments, RF signal chains, frequency conversion systems, and industrial RF equipment. The integrated architecture is particularly useful when the design needs a compact programmable RF source without implementing discrete VCO, divider, and feedback-loop components. When laying out the PCB, place the device power and ground connections according to the manufacturer datasheet, connect the exposed pad to the appropriate ground-plane area, and route the reference, RF, and control signals with short, controlled-impedance traces. Confirm the final frequency plan, loop-filter component values, output matching network, and supply decoupling against the datasheet and evaluation-board design. This page combines the ADF4360-1BCPZ device identity, verified manufacturer and distributor references, practical RF design guidance, and a structured comparison framework. The evaluation board ADF4360-1EBZ1 is identified by Analog Devices as containing an ADF4360-1BCPZ and provides a useful reference for bench-level integration of the integrated synthesizer and VCO.

RFQ پەیوەندی
ADF4360-3BCPZRL - 1.95 GHz Integer-N PLL with VCO | Analog Devices
ADF4360-3BCPZRL

ADF4360-3BCPZRL - 1.95 GHz Integer-N PLL with VCO | Analog Devices

The Analog Devices ADF4360-3BCPZRL is a fully integrated integer-N frequency synthesizer with an on-chip voltage-controlled oscillator, a 1500 MHz to 1950 MHz RF output range, and a 24-lead WFQFN exposed-pad package. It combines a programmable PLL, VCO, integer-N frequency divider, and reference divider in one RF clock-generation IC. An integer-N frequency synthesizer generates a stable output phase-locked to a reference oscillator. The PLL compares divided feedback with the reference signal, while the integrated VCO supplies the variable-frequency output. The ADF4360-3 family is designed around a 1750 MHz center frequency and also provides a divide-by-2 output option. A 3-wire serial interface programs frequency, divider ratios, output power, and operating functions. Key characteristics include a 3.3 V analog supply range of 3.0 V to 3.6 V, 1.8 V logic compatibility, programmable RF output power, a digital lock-detect function, and hardware or software power-down modes. The 1500 MHz to 1950 MHz operating range makes the device suitable for RF transceivers, wireless infrastructure, test equipment, and frequency-hopping systems. The device uses an integer-N architecture rather than a fractional-N feedback divider. This simplifies frequency planning and control, but the achievable output frequency and phase-noise performance depend on the reference frequency, loop filter, PFD settings, output division, and printed-circuit-board implementation. Integer-N synthesizers are particularly suitable where a clean integer relationship between reference and output frequency simplifies calibration. Typical uses include 1.5 GHz to 1.95 GHz RF signal generation, local-oscillator synthesis, communication test equipment, and microwave subsystem clocking. The ADF4360-3BCPZRL is also a sensible choice when board area must be minimized because the PLL, VCO, dividers, and control interface share one exposed-pad package. Layout quality is critical in an integrated VCO and PLL. Place the loop-filter components, reference components, supply bypass capacitors, and decoupling network close to their associated pins. Use a continuous ground reference beneath the exposed pad, provide low-impedance supply connections, and keep sensitive feedback and control traces short and isolated from high-current switching paths. This product summary combines the manufacturer's functional description, package information, operating limits, pin-function guidance, interface details, and practical RF layout considerations into an engineering-oriented reference for component selection, schematic capture, PCB implementation, and system bring-up.

RFQ پەیوەندی
ADF4360-4BCPZRL - 1.45-1.75GHz Integer-N VCO | Analog Devices
ADF4360-4BCPZRL

ADF4360-4BCPZRL - 1.45-1.75GHz Integer-N VCO | Analog Devices

The Analog Devices ADF4360-4BCPZRL is a fully integrated integer-N frequency synthesizer and voltage-controlled oscillator designed for a 1450 MHz to 1750 MHz center-frequency range, with a 1600 MHz nominal design center, in a 24-lead WFQFN exposed-pad package. The device operates from a 3.0 V to 3.6 V supply and provides a divide-by-2 RF output from 725 MHz to 875 MHz. Its registers are controlled through a three-wire serial interface. An integer-N synthesizer combines a phase-locked loop, frequency divider, reference divider, and VCO into one RF timing subsystem. Within the broader clock-and-timing hierarchy, this device sits below the PLL category as an RF clock generator and frequency synthesizer. The integrated VCO eliminates the need for a separate resonator in many RF signal chains, while the programmable divide ratios allow the synthesizer to generate multiple related output frequencies from a stable reference source. Key features include a 1450 MHz to 1750 MHz main output range, 725 MHz to 875 MHz divide-by-2 operation, a three-wire control interface, and a 3.3 V supply operating region. The 24-lead WFQFN package includes an exposed thermal pad for board-level heat dissipation. These characteristics suit RF transceivers, up-converters, test equipment, and instrumentation requiring a compact local oscillator. Technically, the ADF4360-4 combines an integer-N PLL with an integrated VCO and programmable RF output stages. The manufacturer datasheet identifies a designed center frequency of 1600 MHz and a divide-by-2 mode extending the usable output range to 725 MHz through 875 MHz. Because the feedback divider is integer, a reference frequency and integer division ratio must be selected carefully to achieve the desired channel without excessive phase noise degradation. Typical applications include 1.4 GHz to 1.8 GHz RF transceiver local oscillators, low-frequency divide-by-2 outputs in the 725 MHz to 875 MHz band, and laboratory or industrial RF test systems. The integrated synthesizer can also serve wireless infrastructure when its specified frequency range, reference requirements, register programming, and thermal limits align with the target channel plan. PCB design should preserve short RF routes, provide solid ground-plane continuity beneath the exposed pad, and place the reference and decoupling networks close to the device. Verify the loop-filter component values and register sequence against the manufacturer application guidance before bringing up a new board, particularly when phase noise or spur requirements are critical.

RFQ پەیوەندی
ADF4360-5BCPRL7 - 1.3 GHz Integer-N VCO | Analog Devices
ADF4360-5BCPRL7

ADF4360-5BCPRL7 - 1.3 GHz Integer-N VCO | Analog Devices

The Analog Devices ADF4360-5BCPRL7 is a fully integrated integer-N synthesizer and voltage-controlled oscillator with a 1300 MHz center frequency, a 1400 MHz output specification, and a 24-lead LFCSP package with exposed pad. It accepts reference-clock frequencies from 10 MHz to 250 MHz and supports a divide-by-2 output covering 600 MHz to 700 MHz. On-chip registers are controlled through a three-wire serial interface. An integer-N synthesizer is a phase-locked-loop-based frequency generator that combines an integrated voltage-controlled oscillator with a programmable frequency divider and phase detector. In the broader hierarchy, the ADF4360-5 belongs to clock and timing ICs, PLL synthesizers, RF signal generators, and integrated VCO products. Its integrated architecture reduces the number of discrete RF components required for local oscillator generation while retaining programmable frequency and phase control. Key features include a 1300 MHz VCO center frequency, a divide-by-2 output range of 600 MHz to 700 MHz, and a 1400 MHz output specification. The 10 MHz to 250 MHz reference-input range supports common external reference arrangements. The three-wire register interface simplifies digital control, while the exposed thermal pad assists heat transfer from the RF synthesizer and its internal functional blocks. The device uses an integer-N PLL architecture in which the synthesized output is related to the reference frequency by integer multiplication and division. This makes it useful when a stable, programmable RF output is required without the complexity of fractional-N calibration. The divide-by-2 path provides an additional output option when the required frequency falls within the stated 600 MHz to 700 MHz range. Register programming determines the frequency plan and operating mode through the manufacturer-defined serial interface. Typical applications include local oscillator generation for RF transceivers, up/down-conversion chains, test-and-measurement instruments, wireless infrastructure, and communications equipment. It is particularly appropriate when the required output is close to the 1300 MHz VCO range and the system already includes a suitable reference clock and microcontroller or FPGA interface. The integrated VCO also simplifies RF board design compared with a discrete oscillator and separate PLL arrangement. The principal design consideration is frequency-plan validation. The reference frequency, integer divider, output divider, RF output range, and required lock behavior must be checked together before committing to a PCB layout. Keep the serial interface traces short, provide clean reference-clock routing, decouple the supply pins according to the manufacturer datasheet, and provide adequate exposed-pad thermal relief beneath the 24-lead LFCSP. This page combines the verified device characteristics with practical PLL design notes, application guidance, package details, and same-footprint family alternatives. It also identifies where application-specific frequency, phase-noise, temperature, compliance, and electrical data must be checked directly against the manufacturer datasheet before production release.

RFQ پەیوەندی
ADF4360-6BCP - 1.25 GHz Integer-N PLL Synthesizer | Analog Devices
ADF4360-6BCP

ADF4360-6BCP - 1.25 GHz Integer-N PLL Synthesizer | Analog Devices

The Analog Devices ADF4360-6BCP is a fully integrated integer-N frequency synthesizer with a voltage-controlled oscillator, a 1.25 GHz upper RF-output range, and a 3.6 V power supply in a 24-lead WFQFN exposed-pad package. The device is designed around a 1150 MHz VCO center frequency and also offers a divide-by-2 output covering 525 MHz to 625 MHz. An integer-N PLL synthesizer is a clock-and-timing IC that generates a stable, programmable RF output from a reference frequency. Its hierarchy includes frequency synthesizer, phase-locked loop, clock generator, and timing IC. Integrating the synthesizer, VCO, programmable dividers, reference divider, and RF output circuitry into one package simplifies RF signal-source and transceiver designs while reducing external components. Key features include a 65 MHz to 400 MHz RF output range identified for the device, a 10 MHz to 250 MHz reference-input range, 3.6 V analog supply operation, and 1.8 V logic compatibility. The three-wire serial interface provides digital programming, while digital lock detect, programmable output power, and hardware and software power-down functions support controlled system operation. The ADF4360-6 architecture allows the synthesized RF output to be programmed through its serial interface. Its integer-N feedback divider and internal reference divider establish the synthesis ratio, while the integrated VCO provides the oscillator source. The divide-by-2 path broadens the lower-frequency use cases, and the exposed thermal pad provides the primary thermal and electrical connection to the PCB. Typical applications include RF signal generation, wireless communication transceivers, test and measurement equipment, industrial RF systems, and instrumentation requiring programmable RF outputs. The combination of a 1.25 GHz maximum RF output, digital programming, and integrated VCO supports compact RF subsystems where an external oscillator and discrete PLL would otherwise require additional board area. Design the supply, reference, loop-filter, and RF-output networks in accordance with the manufacturer’s application guidance. Place input and output bypass capacitors close to their associated pins, use a continuous ground plane, and connect the exposed pad to a low-impedance thermal and ground region. Verify lock, output power, spur performance, and phase noise in the final reference and loop-filter implementation. This product resource combines device specifications, functional use cases, design guidance, and documented drop-in alternatives to support component selection and PCB implementation more efficiently than a basic manufacturer datasheet listing.

RFQ پەیوەندی
ADF4360-6BCPRL7 - 1.25 GHz RF Synthesizer | Analog Devices
ADF4360-6BCPRL7

ADF4360-6BCPRL7 - 1.25 GHz RF Synthesizer | Analog Devices

The Analog Devices ADF4360-6BCPRL7 is an integrated integer-N frequency synthesizer and voltage-controlled oscillator with a 1.25 GHz output, a 1150 MHz center frequency, and a 24-lead lead-free chip-scale package with exposed pad. Its reference input accepts signals from 10 MHz to 250 MHz, while the available divide-by-2 output covers 525 MHz to 625 MHz. The device is intended for RF signal generation, clocking, and frequency conversion systems requiring a compact local oscillator. An integer-N synthesizer generates an output frequency by comparing the divided feedback signal with a reference frequency. In the broader semiconductor hierarchy, the ADF4360-6 is a clock and timing IC, then a frequency synthesizer, then an integer-N PLL with an integrated VCO. This integrated approach combines phase locking, frequency division, and RF generation in one package, reducing the number of separate RF components required in a radio or test-equipment design. Key features include a 1150 MHz VCO center frequency, RF output capability extending to 1.25 GHz, and an optional divide-by-2 output between 525 MHz and 625 MHz. Its reference input range of 10 MHz to 250 MHz supports common external reference sources. The 24-WFQFN exposed-pad construction provides a compact surface-mount footprint and a direct thermal path into the PCB when its exposed pad is properly soldered. The internal architecture uses integer-N feedback to multiply a reference frequency into the required RF output. The synthesizer supports programmable frequency control through a serial interface, allowing the system controller to set the operating channel. Because the VCO is integrated, the external RF network is simpler than a discrete oscillator arrangement, although loop-filter, reference, decoupling, and output-matching layouts remain critical at high frequencies. Typical applications include RF transceiver local-oscillator generation, wireless communication equipment, frequency conversion blocks, industrial RF test equipment, and instrumentation requiring programmable RF outputs. The 1.25 GHz output is particularly relevant to RF communications and microwave test systems, while the 525 MHz to 625 MHz divided output can serve lower-frequency signal chains. For PCB implementation, use an exposed-pad land pattern with adequate thermal-via density and place the reference and loop-filter components close to their associated pins. High-frequency routing must minimize parasitic capacitance and inductance. The board should also provide clean supply and ground planes, because supply noise or unstable reference routing can degrade phase noise and PLL lock behavior. This product page combines the manufacturer function description with package, interface, replacement, and design guidance for engineers evaluating the ADF4360-6BCPRL7. It also identifies the practical differences among pin-compatible ADF4360 frequency options so that a board can be reviewed for RF range, control firmware, and qualification requirements before substitution.

RFQ پەیوەندی
ADF4360-7BCP - 350-1800 MHz Integer-N Synthesizer | Analog Devices
ADF4360-7BCP

ADF4360-7BCP - 350-1800 MHz Integer-N Synthesizer | Analog Devices

The Analog Devices ADF4360-7BCP is an integrated integer-N frequency synthesizer and voltage-controlled oscillator with a 350 MHz to 1800 MHz tuning range, 3.6 V power supply, and 1.8 V-compatible logic in a 24-lead LFCSP package with an exposed pad. A divide-by-2 output mode provides an RF output range of 175 MHz to 900 MHz. An integer-N synthesizer is a phase-locked-loop frequency generator that combines a digitally controlled frequency divider, phase detector, charge pump, reference divider, and voltage-controlled oscillator. The ADF4360-7 integrates the synthesizer and VCO into one RF IC, while external inductors establish the required RF resonance and frequency range. This places the device within the hierarchy of RF synthesizer, PLL frequency generator, clock and timing IC, and semiconductor. Principal features include an integer-N architecture, a three-wire serial interface, programmable output power, digital lock detection, and hardware and software power-down modes. The 350 MHz to 1800 MHz operating range covers radio, communications, instrumentation, and test-equipment frequency plans. Its divide-by-2 function extends the design flexibility by producing 175 MHz to 900 MHz outputs when a lower divided frequency is required. The internal feedback divider permits integer-N frequency synthesis from the external reference, while the integrated VCO removes the need for a separate discrete oscillator in suitable designs. A 3.6 V supply supports the RF core, and 1.8 V-compatible interfacing allows connection to modern control logic. The three-wire serial interface provides a compact path for register configuration, output-power adjustment, and operating-mode control. Typical uses include wireless transceiver local oscillator generation, radio-frequency test equipment, frequency-generation modules, and communication equipment requiring programmable RF outputs. Designers can also use the device in measurement systems that need an integrated synthesizer and VCO with selectable output power and lock-status feedback. PCB implementation should preserve short RF paths and a controlled ground plane around the exposed pad. Place the VCO inductors and associated decoupling components close to the relevant device pins, and route the serial interface away from sensitive RF nodes. Validate lock behavior, unwanted harmonics, and supply-noise sensitivity on the assembled board because RF layout and component selection strongly influence final performance. This product page combines the manufacturer's frequency-range and interface details with pin-compatible family options, comparison data, and practical RF layout guidance. It is intended to help engineers identify whether the ADF4360-7BCP matches a required tuning range, package, and control interface before beginning PCB implementation.

RFQ پەیوەندی
ADF4360-7BCPZRL - 1.8 GHz Integer-N VCO | Analog Devices
ADF4360-7BCPZRL

ADF4360-7BCPZRL - 1.8 GHz Integer-N VCO | Analog Devices

The Analog Devices ADF4360-7BCPZRL is an integrated integer-N frequency synthesizer and voltage-controlled oscillator with a 1.8 GHz center frequency, programmable RF output, and a 24-lead WFQFN exposed-pad package. The device uses external inductors to establish its operating frequency range and supports an integer-N architecture for stable, programmable RF generation. An integer-N synthesizer is a phase-locked-loop device that combines a frequency divider, phase detector, charge pump, loop filter, and voltage-controlled oscillator to produce an output frequency locked to a reference source. The ADF4360-7 belongs to the broader hierarchy of frequency synthesizer, clock and timing IC, phase-locked loop, and RF signal-generation semiconductor. Integrating the synthesizer and VCO reduces the number of high-frequency discrete components required in the RF signal chain. The ADF4360-7 covers a 350 MHz to 1800 MHz center-frequency range when configured with external inductors. Its divide-by-2 output option provides frequencies from 175 MHz to 900 MHz. Additional documented functions include a three-wire serial interface, programmable output power, digital lock detect, and hardware or software power-down control, making the device suitable for systems that need controllable RF output and efficient power management. The RF architecture operates from a 3.6 V supply and supports 1.8 V logic compatibility. These characteristics suit equipment using modern low-voltage control systems while retaining the voltage headroom required by the integrated VCO and synthesizer. External inductors determine the center frequency and are therefore a central part of frequency planning rather than optional power inductors. Typical uses include local oscillator generation for wireless receivers and transmitters, RF down-conversion, test and measurement instrumentation, industrial RF control, and communications equipment operating below 1.8 GHz. The divide-by-2 function is particularly useful when a lower output is required without implementing a separate output divider stage. PCB design requires careful treatment of the 24-WFQFN exposed pad, supply decoupling, grounding, and the external VCO inductors. The exposed pad must be connected to the ground plane with a low-impedance thermal and electrical path. The reference, serial interface, and RF output routing should also follow the layout guidance in the manufacturer datasheet. This product data combines the ADF4360-7 operating ranges, package information, pin-compatible family references, and practical implementation guidance to support RF architecture selection, PCB planning, and replacement decisions.

RFQ پەیوەندی
ADF4360-8BCP - 65-400MHz Integer-N PLL VCO | Analog Devices
ADF4360-8BCP

ADF4360-8BCP - 65-400MHz Integer-N PLL VCO | Analog Devices

The Analog Devices ADF4360-8BCP is an integrated integer-N frequency synthesizer and voltage-controlled oscillator covering 65 MHz to 400 MHz in a 24-lead surface-mount package. It combines a phase-locked loop, a voltage-controlled oscillator, programmable output power, a digital lock-detect function, and a three-wire serial interface. The device operates from a 3.6 V power supply and supports 1.8 V logic compatibility. An integer-N frequency synthesizer is a phase-locked-loop-based RF signal source that divides its reference frequency by an integer value to establish the synthesized output. It belongs to the PLL synthesizer and VCO hierarchy, where the PLL locks a voltage-controlled oscillator to a stable reference. This integrated approach reduces the number of discrete RF components required in receivers, transmitters, test equipment, and frequency-conversion systems. The ADF4360-8 uses external inductors to set the VCO center frequency across its 65 MHz to 400 MHz range. Its three-wire serial interface controls the on-chip registers, while programmable output power allows the RF output level to be adjusted. A digital lock-detect output supports system-level status monitoring, and hardware and software power-down modes help control operating state and power consumption. The ADF4360-8 integrates both the frequency synthesizer and VCO rather than requiring a separate oscillator. Its integer-N architecture provides a straightforward frequency-setting method derived from the reference input and programmed divider values. The center frequency is established by external inductors, while the synthesizer's register interface controls synthesis, calibration, power-down, lock detection, and output behavior. Typical uses include local oscillator generation in RF receivers, intermediate-frequency signal sources, communications test equipment, frequency counters, instrumentation, and low-to-medium-frequency RF signal generation. The 65 MHz to 400 MHz operating range is particularly useful where a compact, programmable RF source is needed instead of a fixed-frequency oscillator. PCB design should preserve the RF return paths associated with the VCO and keep the serial-interface traces away from sensitive RF nodes. Follow the manufacturer's pin-description table, recommended decoupling configuration, and layout guidance. External inductor selection is central to the achievable center frequency, so account for tolerance, parasitic inductance, current capability, and layout effects during design verification. This page combines the ADF4360-8 technical specifications with practical application guidance, pin and package considerations, comparison data, and design guidance intended to help engineers evaluate the synthesizer beyond a basic catalog listing.

RFQ پەیوەندی
ADF4360-9BCPZ - 400 MHz Integer-N PLL Synthesizer | Analog Devices
ADF4360-9BCPZ

ADF4360-9BCPZ - 400 MHz Integer-N PLL Synthesizer | Analog Devices

Analog Devices ADF4360-9BCPZ is an integer-N frequency synthesizer with an integrated voltage-controlled oscillator, a 65 MHz to 400 MHz tuning range, and a 24-WFQFN exposed-pad package. The device operates from a 3 V to 3.6 V supply and provides three outputs through a serial programming interface. An integer-N PLL synthesizer is a clock-generation and frequency-synthesis category that combines a phase-locked loop, voltage-controlled oscillator, programmable dividers, and reference-frequency conditioning. In a typical RF signal chain, a stable external reference establishes the PLL operating point while the integrated VCO generates a programmable carrier. The ADF4360-9 family places these functions into one surface-mount IC, reducing board area while supporting locally generated RF frequencies for communication and test equipment. The primary operating characteristics are a maximum synthesizer frequency of 400 MHz, a lower tuning boundary of 65 MHz, and a 3 V to 3.6 V analog supply range. Three output stages support RF signal generation, while the serial interface allows frequency and configuration parameters to be programmed by an embedded controller. External inductors set the VCO center frequency, allowing the tuning range to be tailored to the intended RF band. The ADF4360-9 architecture combines an integrated PLL and VCO with integer-N division for programmable RF output. The 24-WFQFN exposed-pad package supports compact surface-mount layouts, while the exposed thermal pad provides the primary path for heat removal. Because the VCO requires external inductors, component selection and PCB routing determine whether the intended frequency range is reached cleanly and repeatably. Typical uses include local oscillator generation for RF transceivers, programmable test and measurement sources, industrial wireless links, and low-cost RF signal-chain prototypes. The 65 MHz to 400 MHz range covers multiple industrial, scientific, and communications sub-bands. The EV-ADF4360-9EB1Z evaluation board provides a practical platform for evaluating the synthesizer with USB control and SMA-connected RF outputs. Layout is the central implementation consideration. Place the required inductors, decoupling capacitors, reference components, and output-network parts according to the manufacturer’s recommended circuit, and keep high-frequency RF routing compact. The exposed pad must be connected to the appropriate ground plane, while thermal design should account for both local heating and the device’s operating frequency. This page combines the core operating limits, package information, design guidance, and relevant family comparisons for engineers evaluating the ADF4360-9BCPZ. It also identifies where a same-footprint family member can reuse an existing PCB while requiring careful verification of its tuning range and control settings.

RFQ پەیوەندی
ADF4360-9BCPZRL - 400MHz PLL Synthesizer | Analog Devices
ADF4360-9BCPZRL

ADF4360-9BCPZRL - 400MHz PLL Synthesizer | Analog Devices

Analog Devices ADF4360-9BCPZRL is an integrated integer-N frequency synthesizer and voltage-controlled oscillator for RF clock generation from 65 MHz to 400 MHz. The device uses external inductors to establish its VCO center frequency, provides an RF output up to 400 MHz, and includes an integer divider for CMOS clock outputs divided by 2 through 31. It is packaged in a 24-lead WFQFN with an exposed pad. An integer-N PLL synthesizer is a clock-generation and timing IC that combines a phase-locked loop, voltage-controlled oscillator, programmable frequency dividers, and control interfaces. Within the broader clock and timing hierarchy, the ADF4360-9 sits between general-purpose clock generators and highly integrated RF transceiver frequency synthesizers. Its external resonant components allow the VCO frequency range to be tailored to the target RF band while the internal PLL locks the oscillator to a stable reference. The central operating window is 65 MHz to 400 MHz. An integer divider extends the device beyond its direct VCO range by producing a divided CMOS output corresponding to the VCO frequency divided by an integer from 2 through 31. A three-wire control interface provides access to the on-chip registers, supporting programmable frequency selection and PLL configuration. These features make the device suitable for RF transceivers, radio equipment, test and measurement systems, clock-generation modules, and frequency-conversion front ends. Because the VCO center frequency is established by external inductors rather than an internal resonator, PCB implementation is central to performance. The resonator network, loop filter, reference connections, supply decoupling, and RF output path must follow the layouts and component-selection guidance in the Analog Devices ADF4360-9 datasheet. Keeping sensitive control and feedback nodes compact helps limit parasitic effects while preserving stable phase-lock operation and predictable RF output behavior. Typical deployments include local oscillator generation for RF transceivers, programmable reference generation for wireless equipment, auxiliary clock production for communication infrastructure, and laboratory instruments requiring a single synthesizer to cover multiple frequencies. The divided CMOS output can supply a lower-rate clock when the RF output does not need to drive the next stage directly. A key design consideration is the relationship between the requested output frequency, divider setting, reference frequency, and external VCO components. The output stage and feedback loop must support the intended frequency and load, while the exposed thermal pad requires a suitable PCB thermal path. Review the recommended component values and layout before releasing a production board. This page organizes the manufacturer specifications, sourcing structure, application guidance, and design considerations for ADF4360-9BCPZRL. It also distinguishes verified device functions from parameters that require confirmation in the datasheet, helping engineers evaluate the part without conflating packaging variants or unvalidated substitutes with a true drop-in replacement.

RFQ پەیوەندی
ADF4371BCCZ - 32 GHz Wideband PLL Synthesizer | Analog Devices
ADF4371BCCZ

ADF4371BCCZ - 32 GHz Wideband PLL Synthesizer | Analog Devices

Analog Devices ADF4371BCCZ is a 32 GHz wideband microwave PLL frequency synthesizer with an integrated voltage-controlled oscillator, operating as either an Integer-N or fractional-N synthesizer. Its RF output spans 62.5 MHz to 32,000 MHz, while the external reference input range is 10 MHz to 600 MHz. The device is packaged in a 48-pin TFLGA with an exposed pad. A phase-locked-loop frequency synthesizer generates a stable, programmable RF frequency by locking a voltage-controlled oscillator to a stable reference. The ADF4371 belongs to the PLL frequency synthesizer and clock generator category, where it combines an integrated microwave VCO, phase detector, programmable divider chain, reference input, and synthesizer control functions. It supports fractional-N operation with a 39-bit fractional modulus, providing finer frequency resolution than integer-only division. Key features include a continuous RF output range of 62.5 MHz to 32 GHz, support for both Integer-N and fractional-N synthesis, and a 39-bit fractional modulus. An external reference and external loop filter allow the system designer to establish the reference source and tune loop dynamics. The integrated VCO reduces the number of external microwave oscillator components required for broadband RF signal generation. The ADF4371 architecture supports a 10 MHz to 600 MHz reference input range. Reference selection influences phase-noise performance, frequency stability, and synthesis accuracy, while the loop filter determines transient response and phase-noise behavior. The fractional-N architecture permits smaller frequency steps than an Integer-N-only implementation, although loop-filter design and digital calibration behavior must be evaluated against the required channel spacing and spurious specifications. Typical applications include microwave and millimeter-wave signal generation, communications test equipment, radar test systems, frequency-conversion chains, and local-oscillator generation covering the 62.5 MHz to 32 GHz range. The wide tuning span makes the device useful where one synthesizer must support multiple instrumentation bands rather than a fixed narrow frequency plan. The primary design consideration is the external loop filter. Its component values, charge-pump current, reference-divider settings, and feedback-divider ratio must be coordinated with the intended output frequency and phase-noise target. RF routing also requires controlled impedance and short return paths around the exposed-pad thermal and grounding structure. This product page combines the ADF4371BCCZ manufacturer specifications, package details, sourcing guidance, technical applications, comparison points, and practical design considerations into one engineering-focused reference for synthesizer implementation.

RFQ پەیوەندی
ADF4371BCCZ-RL7 - 32 GHz Wideband PLL/VCO | Analog Devices
ADF4371BCCZ-RL7

ADF4371BCCZ-RL7 - 32 GHz Wideband PLL/VCO | Analog Devices

The Analog Devices ADF4371BCCZ-RL7 is an integer-N and fractional-N frequency synthesizer with an integrated wideband microwave voltage-controlled oscillator, providing output frequencies from 62.5 MHz to 32 GHz in a 48-lead TFLGA package with exposed pad. The device supports four outputs and requires an external reference frequency and loop filter for phase-locked-loop implementation. A frequency synthesizer is an electronic timing component that generates a stable, programmable output signal from a reference frequency. This ADF4371 belongs to the broader hierarchy of clock and timing ICs, RF synthesizers, phase-locked loops, and microwave signal-chain components. Its wide tuning range makes it useful where multiple high-frequency carriers must be synthesized locally rather than generated by a separate oscillator chain. The headline capabilities include a maximum generated frequency of 32 GHz, a minimum generated frequency of 62.5 MHz, four outputs, and support for both integer-N and fractional-N synthesis. The 48-TFLGA exposed-pad package is intended for compact RF modules and high-density microwave assemblies. Compared with a discrete VCO and divider arrangement, the integrated synthesizer centralizes frequency generation, phase detection, feedback, and programmable output management. According to the Analog Devices ADF4371 datasheet, the architecture uses an external reference and external loop filter to implement the phase-locked loop. The external filter permits engineering control over loop bandwidth, phase-noise behavior, reference-spur suppression, and lock characteristics. Integer-N operation supports exact integer relationships between the reference and output, while fractional-N operation expands practical division ratios and output-planning flexibility. Typical uses include microwave test equipment, phased-array radar, radio-frequency instrumentation, microwave synthesizers, and wideband communication modules. The four-output architecture can reduce the number of separate synthesis paths in multi-channel systems when the required frequencies and isolation are compatible with the device architecture. PCB implementation requires careful treatment of the exposed pad, supply decoupling, reference routing, RF outputs, and the external loop-filter network. Follow the pin-description table and layout guidance in the manufacturer datasheet during schematic capture and PCB placement. The exposed-pad thermal path must be connected according to the package recommendation to avoid localized heating. This page combines the manufacturer specifications, package details, application guidance, practical design notes, and verified sourcing information for engineers evaluating the ADF4371BCCZ-RL7 as a wideband microwave PLL/VCO building block.

RFQ پەیوەندی
ADF4372BCCZ - 62.5MHz-16GHz Integer-N PLL with Integrated VCO | Analog Devices
ADF4372BCCZ

ADF4372BCCZ - 62.5MHz-16GHz Integer-N PLL with Integrated VCO | Analog Devices

The Analog Devices ADF4372BCCZ is a wideband microwave integer-N phase-locked loop (PLL) frequency synthesizer with an integrated voltage-controlled oscillator (VCO), generating output frequencies from 62.5 MHz to 16 GHz in a 48-lead TFLGA package with exposed pad. The VCO core operates from 4000 MHz to 8000 MHz, and an internal multiplier extends coverage to 8 GHz to 16 GHz, while an output divide chain of 1, 2, 4, 8, 16, 32, or 64 extends the low end down to 62.5 MHz at RF8x. A PLL frequency synthesizer is a closed-loop timing device: a phase-frequency detector compares a divided output against a stable reference, and a charge pump plus loop filter converts the phase error into a tuning voltage that steers the internal VCO. When used with an external reference and an external loop filter, the ADF4372 supports both fractional-N and integer-N synthesis architectures, a hybrid approach in which a programmable fractional modulus shapes the reference ratio so the output can land on frequencies that are not integer multiples of the reference. Key features include a 62.5 MHz to 16 GHz total tuning range in a single monolithic part, double-buffered registers for FRAC1, MOD2, FRAC2, reference doubler, reference divide-by-2, R counter, and charge pump current settings, and a low-noise charge pump that drives the external loop filter. Because the reference divider, fractional modulus, and charge pump current are all double buffered, the synthesizer can be retuned without dropping out of lock, which is essential for fast frequency switching in test equipment and microwave front ends. The device accepts an external reference frequency and requires an external loop filter, giving the designer freedom to trade phase noise against lock time and reference multiplication ratio. Its architecture deliberately separates the reference path from the RF path: the R counter sets the reference division, while the N counter and fractional fields set the feedback division, so the synthesizer can be configured without changing the reference source. Typical applications include 5G and microwave radio base-station and backhaul frequency generation, radar and electronic warfare test benches, wideband test and measurement instrumentation, satellite and VSAT up-converters, and microwave front-end local oscillator synthesis for phased-array receivers and 5G mmWave radio units. When designing with the ADF4372BCCZ, budget loop-filter components against the target lock time and phase-noise mask, and keep the VCO supply and reference paths on separate, well-decoupled rails because supply ripple at the VCO supply pin directly multiplies into phase noise. The exposed pad must be soldered to a solid ground plane for both thermal and return-path reasons. This page consolidates the manufacturer specifications, package and pin details, drop-in alternatives, and hands-on design guidance for the ADF4372BCCZ into one engineering reference, adding the comparison and integration detail that the datasheet leaves to the reader.

RFQ پەیوەندی
ADF5000BCPZ - 18 GHz Divide-by-2 RF Prescaler | Analog Devices
ADF5000BCPZ

ADF5000BCPZ - 18 GHz Divide-by-2 RF Prescaler | Analog Devices

The Analog Devices ADF5000BCPZ is an 18 GHz, divide-by-2 RF prescaler IC with differential 100 ohm outputs, supplied in a 16-lead WFQFN exposed-pad package. It operates from a 3.3 V supply and is designed to divide high-frequency RF signals down to a frequency suitable for a PLL frequency synthesizer or frequency divider. An RF prescaler is a clock-and-timing semiconductor that divides an input carrier into a lower-frequency signal while preserving the phase relationship needed by phase-locked loops. The ADF5000 belongs to the RF prescaler hierarchy, where it serves as a fixed divide-by-2 block ahead of a PLL such as the ADF4156 or ADF4106. Its differential outputs reduce common-mode effects and provide a suitable interface to compatible RF clock circuits. The primary features of the ADF5000BCPZ include operation to 18 GHz, a fixed divide-by-2 function, low-noise and low-power operation, a 3.3 V supply requirement, and differential 100 ohm RF outputs. These characteristics make it particularly useful when a synthesizer requires an RF input above the native frequency range of its PLL front end. The exposed pad also provides the primary thermal path when used in space-constrained microwave assemblies. Technically, the ADF5000 is intended as a fixed divider rather than a programmable integer divider. Its divide ratio is not selected by a register or external control interface. The RF signal therefore enters the prescaler, is divided by two, and exits through the differential output network for subsequent phase comparison or frequency measurement. The verified manufacturer documentation identifies the ADF4156 and ADF4106 as example downstream PLL devices. Typical applications include microwave synthesizer subsystems, phase-locked-loop reference chains, RF test and measurement equipment, wireless infrastructure, satellite communications, and instrumentation requiring division of carrier frequencies into a range accepted by a PLL or counter. The differential 100 ohm output arrangement is particularly valuable in controlled-impedance RF layouts. Designers should preserve controlled impedance on the RF input and output paths, provide the supply decoupling specified by the manufacturer datasheet, and validate the exposed-pad thermal design at the highest operating frequency. RF trace geometry, return paths, component placement, and ground-plane continuity can materially affect divider performance at microwave frequencies. This product page combines the verified manufacturer specifications, distributor availability, purchasing guidance, comparison fields, and practical RF design considerations. Missing electrical details are explicitly identified rather than inferred, allowing engineers to evaluate the ADF5000BCPZ against the requirements of their specific microwave design.

RFQ پەیوەندی
ADF5000BCPZ-RL7 - 18 GHz Divide-by-2 RF Prescaler | ADI
ADF5000BCPZ-RL7

ADF5000BCPZ-RL7 - 18 GHz Divide-by-2 RF Prescaler | ADI

The Analog Devices ADF5000BCPZ-RL7 is a fixed divide-by-2 RF prescaler for input frequencies from 4 GHz to 18 GHz, supplied in a 16-lead WFQFN package with an exposed pad and operating from a 3.3 V supply. Its differential 100-ohm RF outputs connect directly to differential RF inputs on frequency-synthesizer and phase-locked-loop circuits. An RF prescaler is a frequency-divider block that reduces a high-frequency carrier to a lower frequency that a PLL synthesizer can process. The ADF5000 belongs to the divide-by-2 prescaler category and is positioned within the broader RF frequency-synthesis hierarchy: RF prescaler, divide-by-2 prescaler, frequency divider, clock and timing IC, and semiconductor. Its fixed division ratio simplifies feedback-path design in PLL-based microwave and wireless transmitters. Key features include a 4 GHz to 18 GHz operating range, a fixed divide-by-2 function, a 3.3 V supply requirement, and differential 100-ohm outputs. The high-frequency input capability is useful when a downstream synthesizer has a limited prescaler input range. The differential output arrangement can simplify impedance matching and reduce susceptibility to common-mode disturbances when the following device provides a differential RF input. Technically, the ADF5000 divides the RF input by two while preserving the signal path needed by a PLL feedback divider. Analog Devices identifies the ADF5000 as low-noise and low-power, making it appropriate for communication equipment in which divider-added phase noise or excessive power consumption would degrade the overall frequency synthesizer. Its differential outputs are intended to interface directly with RF circuitry designed for balanced operation. Typical applications include microwave PLL feedback dividers, wireless transceiver local-oscillator synthesis, microwave test equipment, radar and satellite communication chains, and instrumentation requiring frequency division near 18 GHz. The part is particularly relevant when the synthesizer input stage cannot accommodate the original RF frequency but can accept the half-frequency output. PCB implementation requires careful treatment of the RF input and output paths. Keep the RF traces short, use controlled-impedance routing, and provide the supply decoupling and exposed-pad thermal path specified by the manufacturer. The differential output impedance is 100 ohms, so matching networks and transmission-line geometry should be calculated for the complete board stack-up rather than added by trial and error. This product page consolidates the device function, operating limits, package constraints, application guidance, and qualification questions into an engineering-oriented reference. It also identifies the limited set of genuinely compatible catalog options, avoiding unrelated dividers that may use the same package family but provide a different division ratio or pin function.

RFQ پەیوەندی
ADF5002BCPZ - 4-18 GHz Divide-by-8 RF Prescaler | Analog Devices
ADF5002BCPZ

ADF5002BCPZ - 4-18 GHz Divide-by-8 RF Prescaler | Analog Devices

Analog Devices ADF5002BCPZ is a fixed divide-by-8 RF prescaler IC designed for frequencies from 4 GHz to 18 GHz. It operates from a 3.3 V supply and provides differential 100 ohm RF outputs, making it suitable for dividing a high-frequency signal down to a lower frequency suitable for a PLL input. The device is packaged in a 16-WFQFN exposed-pad package. An RF prescaler is a frequency divider block used in radio-frequency signal chains. It belongs to the broader clock-and-timing IC hierarchy, where a prescaler can be used ahead of a phase-locked loop to divide down microwave or millimeter-wave signals. The ADF5002 provides a fixed divide-by-8 function for applications requiring predictable division ratio and direct connection to compatible PLL frequency synthesizers. The ADF5002 is positioned as a low-noise, low-power RF divider block. Its specified operating frequency range extends to 18 GHz, while the 3.3 V supply supports integration into RF and microwave systems requiring a divided reference or feedback signal. Differential 100 ohm RF outputs are intended for direct interfacing with RF circuitry when the board-level impedance and termination requirements are satisfied. The fixed divide-by-8 architecture makes this part most useful when the system frequency plan can accommodate an eightfold reduction. Using the prescaler before a PLL can lower the frequency presented to the synthesizer while preserving the relationship between the RF signal and the generated reference. Signal integrity, grounding, supply decoupling, and output matching remain important because RF divider performance is influenced by the complete transmission-line environment. Typical applications include microwave and millimeter-wave downconversion, RF instrumentation, synthetic-frequency generation, test equipment, and communications equipment using a compatible PLL such as the ADF4156 or ADF4106. The divider can also support frequency-counter and measurement architectures where a high-frequency signal must be reduced before further processing. When designing around the ADF5002BCPZ, preserve the manufacturer-recommended RF trace geometry and provide a low-impedance return path for the differential outputs. Verify the complete frequency plan before selecting the device: the input must fall within the 4 GHz to 18 GHz operating range, and the divided output must remain suitable for the downstream PLL or counter. Use the manufacturer datasheet and its recommended application circuit when defining impedance, bypass capacitance, and exposed-pad thermal connections.

RFQ پەیوەندی
ADF5002BCPZ-RL7 - 18 GHz Divide-by-8 RF Prescaler | Analog Devices
ADF5002BCPZ-RL7

ADF5002BCPZ-RL7 - 18 GHz Divide-by-8 RF Prescaler | Analog Devices

The Analog Devices ADF5002BCPZ-RL7 is a fixed divide-by-8 RF prescaler that can divide input frequencies as high as 18 GHz to a lower frequency suitable for a phase-locked-loop synthesizer. It operates from a 3.3 V supply and provides differential 100 Ω RF outputs for direct connection to compatible PLL inputs. The device is packaged in a 16-lead WFQFN CSP with an exposed pad. An RF prescaler is a frequency-divider block used at the input of a PLL frequency synthesizer. It reduces a high-frequency reference signal by a fixed ratio so that the synthesizer’s phase detector and feedback divider can operate within a more practical frequency range. In this architecture, the ADF5002BCPZ-RL7 belongs to the clock and timing IC hierarchy and serves as the high-frequency divide-by-8 stage preceding PLL circuits such as the ADF4156 or ADF4106. The principal functional specifications are an 18 GHz maximum input frequency, fixed divide ratio of 8, and 3.3 V power supply. The Analog Devices ADF5002 datasheet also specifies differential 100 Ω RF outputs and an operating temperature range of −40°C to +105°C. These characteristics make the part suitable for RF test equipment, microwave communication chains, instrumentation, and frequency-generation systems that require division of microwave-frequency signals without adding another adjustable divider function. Because the ADF5002 is a fixed divider, its output frequency is the input frequency divided by 8. For example, an 8 GHz input produces a 1 GHz divided output. The RF output interface is differential rather than single-ended, which can simplify connection to suitable balanced PLL inputs and help preserve signal integrity when the PCB interconnects are controlled carefully. The device is intended for low-noise, low-power operation, as described in the manufacturer documentation. Typical applications include microwave PLL reference paths, RF instrument local-oscillator chains, satellite and microwave communication test equipment, and low-noise RF signal conditioning. The manufacturer specifically identifies the ADF4156 and ADF4106 as suitable downstream PLL ICs. Designers should verify the PLL’s prescaler-input range, allowable input power, impedance requirements, and reference-noise contribution before finalizing the interface. PCB implementation requires close attention to the exposed thermal and electrical pad, supply decoupling, high-speed RF routing, and grounding. The RF input and differential output paths should use controlled-impedance routing and short connections, with via transitions minimized. The 3.3 V supply network should include local decoupling close to the device, and the exposed pad should be connected to the ground plane according to the manufacturer’s land-pattern and assembly guidance. This page combines the manufacturer’s device description, package and operating information, sourcing data, comparison fields, and application-focused engineering guidance. It is intended to help engineers identify the correct RF divider, validate its PLL interface, and plan layout without treating a functional similarity as proof of pin-to-pin substitutability.

RFQ پەیوەندی
ADF5355BCPZ - 13.6 GHz Integrated VCO PLL | Analog Devices
ADF5355BCPZ

ADF5355BCPZ - 13.6 GHz Integrated VCO PLL | Analog Devices

The Analog Devices ADF5355BCPZ is a microwave wideband frequency synthesizer with an integrated voltage-controlled oscillator, operating up to 13.6 GHz and housed in a 32-pin WFQFN exposed-pad package. It supports fractional-N and integer-N phase-locked-loop architectures, with a three-wire register interface, digital lock detection, programmable output muting, and hardware and software power-down functions. A phase-locked loop is a feedback-controlled frequency-generation system that compares a divided reference signal with a synthesized output and drives a voltage-controlled oscillator toward phase and frequency lock. The ADF5355 integrates the oscillator core, programmable frequency dividers, charge-pump circuitry, reference and feedback paths, and digital control into one RF synthesizer. This placement within the clock-and-timing and frequency-generation hierarchy simplifies microwave signal-source designs compared with a discrete VCO and divider arrangement. Principal features include fractional-N operation for fine frequency resolution, integer-N operation for simpler channelization, programmable output attenuation, and an RFOUT stage that can remain muted until lock is detected. The mute-till-lock-detect function, controlled through a register bit, can suppress unwanted output during acquisition. The device also provides pin-controlled and software-controlled muting, allowing the host circuitry to manage RF visibility during startup or calibration. The ADF5355 supports analog and digital power-supply inputs from 3.15 V to 3.45 V, while its charge-pump and VCO supply range is 4.75 V to 5.25 V. An external loop filter and external reference frequency are required for the complete synthesizer implementation. These interface requirements make the device suitable for systems in which the designer needs direct digital frequency control while retaining a conventional PLL-based RF architecture. Typical applications include microwave test equipment, radar and communications signal sources, phase-noise-sensitive RF test systems, frequency converters, and local-oscillator generation for wireless infrastructure. The integrated VCO reduces board area compared with a discrete oscillator implementation, while fractional-N synthesis can provide frequency offsets that would otherwise require a fine-resolution reference or complex calibration procedure. The principal design trade-off is the need for careful RF layout, stable supplies, and an appropriately designed external loop filter. The exposed package pad requires effective thermal management, and the VCO, charge pump, reference, and output-return paths must be controlled to avoid degrading phase noise or lock performance. Output power and frequency accuracy should therefore be evaluated together rather than relying on nominal synthesizer features alone. This product data consolidates verified manufacturer information, distributor pricing, package details, application guidance, and engineering checks for the ADF5355BCPZ. It also explicitly identifies the missing package-pin, thermal, absolute-maximum, and qualified drop-in replacement data rather than presenting unverified numbers as production specifications.

RFQ پەیوەندی
ADF5355BCPZ-RL7 - 13.6 GHz Wideband PLL Synthesizer | Analog Devices
ADF5355BCPZ-RL7

ADF5355BCPZ-RL7 - 13.6 GHz Wideband PLL Synthesizer | Analog Devices

Analog Devices ADF5355BCPZ-RL7 is a microwave wideband frequency synthesizer with an integrated voltage-controlled oscillator, operating from 6.8 GHz to 13.6 GHz at the main RF output. The device supports integer-N and fractional-N phase-locked-loop operation and is packaged in a 32-lead WFQFN CSP with an exposed pad. It is recommended by Analog Devices for new designs. A frequency synthesizer is a clock-and-timing semiconductor that locks a controlled oscillator to a stable reference, then divides or multiplies that reference to produce a programmable output frequency. The ADF5355 belongs to the PLL frequency-synthesizer family and combines a wideband microwave VCO, programmable frequency dividers, a fractional-N divider, a phase detector, and serial programming interfaces in one device. This integration reduces the number of external high-frequency components required in a microwave signal chain. Key capabilities include operation across the 6.8 GHz to 13.6 GHz VCO range, support for fractional-N or integer-N synthesis, and use with an external reference and loop filter. A divider chain supplies additional lower-frequency outputs. The RFOUTA and RFOUTB output stages can be controlled independently, while the mute-until-lock feature keeps the RFOUTA output stage shut down until the digital lock-detect circuitry confirms that the PLL has locked. The integrated VCO allows the synthesizer to generate microwave signals directly instead of relying entirely on an external oscillator. Designers can select fractional-N operation when fine frequency resolution or reduced reference-frequency requirements are important, or integer-N operation when the required channel spacing aligns naturally with the reference and division ratio. Programming is performed through the device's serial control interface, and the external loop filter determines loop dynamics, phase noise, and reference-spur behavior. Typical uses include microwave radio equipment, instrumentation, test and measurement systems, industrial RF equipment, and broadband communication infrastructure. Its wide tuning range is particularly useful where one synthesizer must cover several microwave bands. The ADF5355 is also suitable for local-oscillator generation, coherent test-tone generation, and frequency conversion stages requiring a programmable, phase-locked source. PCB implementation requires careful treatment of the exposed thermal pad, supply bypassing, RF outputs, and the high-speed reference and program signals. Use the manufacturer's pin-description table when assigning tracks, keep decoupling capacitors adjacent to their supply pins, provide a continuous ground reference beneath the exposed pad, and follow the recommended RF-output routing and impedance-control practices. This product data combines the ADF5355 technical specifications, sourcing information, confirmed same-brand drop-in options, and practical design guidance. It also highlights the functional limits of the alternatives so engineers can distinguish a true footprint-compatible replacement from a superficially similar PLL that requires register, filtering, or application-circuit changes.

RFQ پەیوەندی
ADF5356BCPZ - 13.6 GHz Wideband PLL Synthesizer | Analog Devices
ADF5356BCPZ

ADF5356BCPZ - 13.6 GHz Wideband PLL Synthesizer | Analog Devices

The Analog Devices ADF5356BCPZ is a 13.6 GHz microwave wideband frequency synthesizer with an integrated VCO, housed in a 32-lead WFQFN exposed-pad CSP package. It supports fractional-N or integer-N phase-locked-loop operation with an external loop filter and reference frequency. Its fundamental VCO operates from 3400 MHz to 6800 MHz, while internal divide-by-1 through divide-by-64 paths permit RF output frequencies as low as 53.125 MHz. A microwave wideband synthesizer is a clock-and-timing IC that combines a voltage-controlled oscillator with a phase-locked loop to produce a stable, programmable output frequency. The broader hierarchy is frequency synthesizer > PLL frequency synthesizer > clock generation and timing IC > integrated circuit. This architecture is useful when a system needs precise RF frequency generation from a stable reference without implementing every oscillator and feedback function as discrete circuitry. The ADF5356 supports integer-N and fractional-N synthesis, giving designers flexibility in channel spacing, reference-to-output ratios, and phase-noise planning. Its output stage includes divide ratios of 1, 2, 4, 8, 16, 32, and 64, extending usable output coverage below the VCO fundamental range. According to the Analog Devices product page, the wideband microwave VCO supports frequency operation across the stated 3400 MHz to 6800 MHz fundamental range. The integrated microwave VCO is the central architecture of the device. A PLL locks the VCO to an external reference, while an external passive loop filter shapes loop dynamics and phase noise. Fractional-N operation permits division ratios that are not integers, although final settling time, spurious performance, and loop-filter design depend on the complete system configuration. The exact supply voltages, reference-frequency limits, register map, phase-noise values, and temperature limits are not included in the supplied web results. Typical uses include microwave and RF signal sources, communications test equipment, local oscillators, frequency-conversion subsystems, and instrumentation requiring programmable RF outputs. The divider chain makes the device relevant when a system needs output below the 3400 MHz to 6800 MHz VCO range. The evaluation hardware identified in the verified data includes a differential 122.88 MHz reference TCXO, a loop filter, USB interface, power connections, and SMA connectors. For PCB implementation, follow the exposed-pad land pattern and thermal-via recommendations in the manufacturer datasheet. The external loop filter, reference components, RF output matching network, supply decoupling, and exposed-pad thermal design materially affect phase noise, lock behavior, output power, and system stability. Verify all voltage, temperature, and absolute-maximum limits before releasing a production design. This product record consolidates the verified manufacturer function, frequency-range, divider, mute-function, package, evaluation-board, distributor, and replacement information into one engineering reference. It also distinguishes documented drop-in candidates from broader functional alternatives and flags unavailable electrical data explicitly rather than estimating it.

RFQ پەیوەندی
ADF5356BCPZ-RL7 - 13.6 GHz PLL/VCO Synthesizer | Analog Devices
ADF5356BCPZ-RL7

ADF5356BCPZ-RL7 - 13.6 GHz PLL/VCO Synthesizer | Analog Devices

The Analog Devices ADF5356BCPZ-RL7 is a 13.6 GHz microwave clock synthesizer and fractional-N or integer-N phase-locked-loop frequency synthesizer with an integrated wideband VCO, supplied in a 32-lead WFQFN exposed-pad package. Its fundamental VCO operates from 3400 MHz to 6800 MHz, while divider paths permit RF output frequencies down to 53.125 MHz. The device supports analog and digital supplies from 3.15 V to 3.45 V and charge-pump and VCO supplies from 4.75 V to 5.25 V. A frequency synthesizer is a timing and RF signal-generation component that locks a high-frequency voltage-controlled oscillator to a stable external reference. Its internal hierarchy includes a PLL frequency synthesizer, a wideband microwave VCO, a clock synthesizer, and ultimately an integrated timing or RF signal-generation semiconductor. The reference input and internal feedback establish the closed-loop relationship between the programmed output frequency and the external reference, while an external loop filter controls loop dynamics. The ADF5356 supports programmable division through divide-by-1, 2, 4, 8, 16, 32, and 64 paths. It provides three-wire register control, programmable output muting available through both pins and software, and hardware and software power-down modes. These features allow the frequency, output routing, reference behavior, calibration state, and power state to be configured through the device register map. The -40°C to +85°C operating range supports industrial and commercial equipment rather than automotive-qualified installations. Its 3400 MHz to 6800 MHz fundamental VCO range covers major microwave bands while divider-based operation extends the usable output range toward lower RF frequencies. This architecture is useful when a system needs a single synthesizer to produce multiple related output frequencies, particularly where an external reference and programmable phase-locked loop provide predictable frequency relationships. The 13.6 GHz figure identifies the maximum characterized device or output capability rather than the fundamental VCO range. Typical applications include microwave and millimeter-wave communication equipment, wireless infrastructure, test and measurement instruments, industrial radar and sensing systems, frequency conversion chains, and local oscillators. The integrated VCO reduces the number of discrete microwave components required to establish an RF output. Its programmable divider paths also make the device suitable for low-frequency phase-locked outputs when the required output can be derived from the 3400 MHz to 6800 MHz VCO fundamental. The external loop filter, reference interface, decoupling network, RF output routing, and exposed thermal pad require careful PCB implementation. Power sequencing must accommodate separate analog, digital, VCO, and charge-pump supply domains. RF trace impedance, return paths, output matching, and isolation from switching circuitry are equally important because a stable PLL does not compensate for poor grounding, supply noise, or mismatched transmission lines. This page combines the manufacturer specifications, functional architecture, drop-in migration options, application guidance, and PCB-design considerations needed to evaluate the ADF5356BCPZ-RL7. It also highlights the device's role within the broader PLL and microwave frequency-synthesizer category, helping engineers distinguish direct replacements from alternatives that require different register sequences or board-level redesign.

RFQ پەیوەندی