Clock & Timing
بەرهەمەکان (970+)
ICS660GI - NTSC/PAL Video Clock Generator | Renesas
The Renesas Electronics ICS660GI is a digital video clock source and video generator IC for NTSC and PAL systems, supplied in a 16-pin TSSOP package. It provides clock generation and conversion for digital video equipment, including formats associated with MPEG, NTSC, PAL, and HDTV video timing. The ICS660GI is intended for designers requiring a dedicated timing source for video processing, synchronization, and conversion circuits. Its 16-TSSOP package supports compact PCB layouts in professional video, broadcast, industrial imaging, and test equipment designs. A digital video clock source is a timing IC that generates or converts clock signals used to synchronize video processing blocks. Digital video systems require consistent horizontal and vertical timing across multiple functional stages. The ICS660GI belongs to the broader clock and timing IC hierarchy, where clock generators and frequency converters support video timing, clock distribution, and signal-chain synchronization in electronic equipment. The principal application feature is support for NTSC and PAL video signal generation. These standards require stable timing relationships between synchronization, blanking, active video, and related control signals. The ICS660GI is used where a board-level clock and timing reference is needed rather than a general-purpose microcontroller timer. Its dedicated video timing role can simplify clock distribution and reduce the timing burden placed on a system processor. ICS660GI is identified as a video generator IC with NTSC and PAL support, and it is also described as a digital video clock source. These descriptions reflect its role in digital video clock generation and conversion. The component is associated with clock rates commonly required in MPEG, NTSC, PAL, and HDTV equipment, making it relevant to legacy and specialized video systems where the correct standard and synchronization behavior are more important than a generic low-cost oscillator. The 16-TSSOP package is a surface-mount package with compact lead spacing suitable for modern board assembly. Because the manufacturer datasheet and complete pin-description table are not included in the available product references, engineers should verify pin assignments, voltage ratings, operating frequency, output configurations, and timing tolerances against the current Renesas datasheet before releasing a production design. This page focuses on the function and sourcing facts identified for the exact ICS660GI ordering code. This page combines the verified product description, NTSC/PAL and digital-video timing context, package information, sourcing guidance, and practical design notes. It is intended to help engineers determine whether ICS660GI fits a video timing requirement before requesting a quote for the exact 16-TSSOP device.
ICS661GI - 73.728MHz Audio Clock Source | Renesas | TSSOP-16
Renesas Electronics ICS661GI is a precision audio clock generator and clock synchronizer IC with a 73.728 MHz output, supplied in a 16-pin TSSOP package measuring 4.40 mm wide. The device generates synchronous audio sampling clocks derived from an MPEG stream and can also serve as a standalone clock source using a 27 MHz crystal. A clock generator is a timing IC that converts a reference input into one or more stable clock outputs. Clock generators and clock synchronizers form part of the broader clock and timing IC family, where they support digital audio, communications, data conversion, and embedded signal-processing systems. The ICS661GI is intended specifically for precision audio-clock generation, providing a defined output associated with common digital-audio sampling rates. Its principal documented characteristics include a 73.728 MHz clock output, support for a standalone 27 MHz crystal reference, and a compact 16-pin TSSOP package. The narrow 4.40 mm package width supports conventional surface-mount PCB assembly while reducing the footprint compared with larger clock packages. The manufacturer categorizes the component as a clock generator, clock synchronizer IC for precision audio applications. The ICS661 architecture supports two operating approaches. In MPEG-derived operation, it produces synchronous audio sampling-clock rates from an MPEG stream. In standalone operation, it uses a 27 MHz crystal as the timing reference. This flexibility allows the same device to be evaluated in systems where the upstream source is digital media data or where a local crystal-backed clock is preferred. Typical uses include digital audio equipment, MPEG audio processing chains, audio codecs and converters, consumer electronics, and clock-distribution subsystems requiring a dedicated audio-rate source. System designers should evaluate the device against the required audio sampling rate, reference architecture, output jitter, supply conditions, and acquisition format before finalizing the clock tree. Place the ICS661GI close to the clock-consuming circuit and observe the grounding and decoupling guidance in the Renesas ICS661 datasheet. The 16-pin TSSOP footprint requires a deliberate escape-routing pattern, and unused inputs should be connected according to the manufacturer’s recommended input states. Differential pair routing and controlled return paths are preferable when the output drives a sensitive converter or high-speed digital input. This product page consolidates the clock function, package details, application fit, replacement considerations, and implementation guidance. It also distinguishes documented electrical facts from parameters that require confirmation in the complete manufacturer datasheet, helping engineers plan sourcing and PCB design before committing to a production build.
ICS663M - 120MHz PLL Clock Synthesizer | Renesas Electronics
Renesas Electronics ICS663M is a single-circuit phase-locked-loop clock synthesizer with a maximum operating frequency of 120 MHz, a 1:1 input-to-output ratio, and CMOS clock output. The device is supplied in an 8-SOIC surface-mount package measuring 3.90 mm wide and is listed for operation from 3.13 V to 5.5 V. A phase-locked loop, or PLL, is a frequency-control building block that locks an internally generated or controlled clock to a reference signal. Within the clock and timing hierarchy, the ICS663M functions as a PLL building block combining a phase detector, charge pump, voltage-controlled oscillator, and output buffer. This allows an external timing loop to synthesize or synchronize a stable CMOS clock rather than relying only on a free-running oscillator. The verified product information identifies the ICS663M as a low-cost PLL intended for clock synthesis and synchronization. Its principal documented parameters include one PLL circuit, one clock input, one CMOS output, no differential input or output, a 1:1 input-to-output division ratio, and operation up to 120 MHz. The 8-SOIC package provides a compact surface-mount option for clock-generation and timing circuits. The PLL architecture makes external loop filtering an important part of the application circuit. External components can establish loop bandwidth, damping, and phase-error behavior, which influence jitter, acquisition time, and reference-clock rejection. Actual performance therefore depends on the external loop network, reference frequency, output loading, supply quality, and board layout rather than only on the nominal 120 MHz maximum. Typical applications include reference-clock multiplication, synchronization of communications equipment, generation of a derived system clock, and recovery or conditioning of a timing signal. The ICS663M is also suitable for industrial instrumentation, test equipment, and embedded systems that require a phase-locked CMOS clock but do not require a highly integrated programmable clock generator. Designers should provide stable supply and reference-clock connections, follow the manufacturer’s recommended loop-filter topology, and use short return paths for clock and ground. Because an 8-SOIC footprint is compact, trace geometry and capacitance control become important when maintaining signal integrity at higher clock rates. This page combines verified distributor and manufacturer-linked product information with practical PLL design guidance, transparent comparison data, and availability details. It distinguishes documented parameters from engineering values that still require confirmation from the Renesas datasheet before schematic release or production qualification.
ICS663MI - PLL Clock Driver Building Block | Renesas | 8-SOIC
Renesas ICS663MI is an integrated PLL building block packaged in an 8-pin SOIC, a surface-mount package measuring 3.90 mm wide. The component belongs to the clock and timing semiconductor family and is intended for clock-generation, clock-distribution, and frequency-synthesis systems. The verified product information identifies it as an IC PLL building block and lists the package as 8-SOIC. A PLL building block is a timing IC used within a phase-locked-loop architecture. Its function is to support a feedback-controlled oscillator whose output frequency can be related to a reference frequency. Clock-generation and PLL-based frequency synthesis are part of the broader clock and timing hierarchy, which also includes clock buffers, clock drivers, dividers, oscillators, and frequency multipliers. These devices establish the timing reference used by processors, communications equipment, data converters, and digital control systems. The defining physical characteristic of the ICS663MI is its 8-SOIC package with a stated width of 0.154 inch, or 3.90 mm. Surface mounting supports compact PCB construction and automated assembly. Renesas Electronics America Inc is identified as the manufacturer associated with the listed MPN, while legacy catalog records associate the part with Integrated Device Technology, Inc. The MI package suffix is treated as the manufacturer ordering code shown in the available listings. The ICS663MI belongs to a timing-device category where exact operating limits must be established from the manufacturer datasheet before implementation. Input and output frequency ranges, supply voltage, operating temperature, phase noise, jitter, output configuration, and input-to-output ratio are not stated in the available product records. Those electrical parameters must be checked in the datasheet rather than inferred from the PLL building-block description. The package dimensions are known, but land-pattern and solder-reflow details also require manufacturer guidance. Typical design roles for this device family include clock synthesis, reference distribution, communications timing, digital-system clock trees, and frequency conversion. In each case, the PLL is used to create or organize a stable timing relationship between a reference and an output clock. Whether the ICS663MI can support a particular channel rate, loop filter, output standard, or synchronization scheme depends on its detailed electrical characteristics and recommended application configuration. Before layout, check the complete pin description and recommended decoupling network in the manufacturer datasheet. Keep the clock and feedback routing compact and controlled, and account for jitter and noise budget rather than treating the PLL solely as a frequency multiplier. PCB power and ground distribution, loop-filter component placement, and output-load compatibility are central to achieving predictable clock performance. This product page combines the verified package and device-class information with practical selection guidance, comparison fields, sourcing questions, and design considerations. It separates confirmed facts from parameters that require datasheet confirmation, helping engineers determine whether the ICS663MI belongs in a clock-timing design before requesting a quote or beginning layout.
ICS663MLF - 120MHz PLL Clock Synthesizer | Renesas
The Renesas Electronics ICS663MLF is a low-cost phase-locked-loop clock synthesizer designed for clock synthesis and synchronization, with operation up to 120 MHz and operation from a 3.3 V supply in an 8-pin SOIC package. The integrated circuit combines a phase detector, charge pump, voltage-controlled oscillator, and output buffer in one compact device, providing the core functions required for generating a clock from an external reference. A phase-locked loop, or PLL, is a feedback-control circuit that locks an internally generated oscillator to an external reference signal. In the clock-and-timing hierarchy, a PLL clock synthesizer belongs to the broader clock generator and frequency-synthesizer family. It is used when a system needs a stable, programmable clock derived from a reference rather than a free-running oscillator. The ICS663MLF supports synchronization applications in which phase, frequency, and output stability determine downstream timing quality. The principal device characteristics include a maximum clock frequency of 120 MHz, a 3.3 V operating supply identified in the product listing, and an 8-SOIC package. The SOIC package provides a standard surface-mount form factor suitable for conventional PCB assembly. The MLF ordering suffix is associated with tube packaging, allowing the same device to be ordered in a production-friendly bulk format. The 8-pin arrangement also reduces board area compared with larger clock-generator packages while retaining access to the PLL’s principal external connections. Technically, the phase detector compares the reference and feedback signals, while the charge pump converts the detected phase error into a control voltage. The voltage-controlled oscillator uses that control voltage to generate an output whose frequency is divided and fed back to complete the locking loop. External reference and VCO dividers expand the range of input and output frequencies that can be synthesized. The manufacturer description specifically notes that divider implementations such as the ICS674-01 can be used to configure the ICS663 for a broad range of input frequencies. Typical uses include clock generation for digital logic, synchronization of multiple circuit domains, frequency synthesis in communications equipment, and distributed clocking in industrial or embedded systems. A design should preserve the loop-filter layout and provide clean reference and feedback signals because phase jitter and reference noise propagate directly to the generated clock. Component selection also requires checking the exact output frequency range, reference-input limits, supply tolerance, and external divider values against the manufacturer’s operating table. The key implementation consideration is to use the PLL in its intended reference-and-feedback topology rather than treating it as a free-running oscillator. Place the loop-filter components near the relevant device pins, route the feedback path away from high-current switching nodes, and use a low-jitter reference clock when precise downstream timing is required. Component values and loop bandwidth should follow the manufacturer’s application guidance. This product page combines the device architecture, package information, sourcing guidance, drop-in alternatives, application context, and practical PCB recommendations in one engineering-focused reference. The result helps designers evaluate the ICS663MLF for synchronization and frequency-synthesis designs while identifying where a different PLL family member or a new PCB design is required.
ICS663MT - 120MHz CMOS PLL | Renesas | Clock & Timing
Renesas Electronics ICS663MT is a low-cost phase-locked-loop clock synthesis and synchronization building block with a maximum operating frequency of 120 MHz, one PLL circuit, CMOS output, and an 8-SOIC package. The device integrates a phase detector, charge pump, voltage-controlled oscillator, and output buffer to support clock generation and synchronization functions. Its 1:1 input-to-output ratio identifies it as a non-differential clock PLL rather than a frequency-multiplying synthesizer. A phase-locked loop is a feedback-controlled timing circuit that locks a voltage-controlled oscillator to a reference clock. In the broader semiconductor hierarchy, the ICS663MT belongs to the clock and timing IC family, where PLL building blocks synchronize oscillators, regenerate or distribute clock signals, and reduce timing differences between related circuit domains. The ICS663MT specifically provides the phase-detection and feedback functions needed to establish a stable relationship between an input clock and its generated output. The principal documented characteristics are a 120 MHz maximum frequency, one PLL circuit, a 1:1 input-to-output ratio, CMOS output signaling, and no differential input or differential output. These specifications make the ICS663MT relevant to designs requiring a single-ended clock relationship, including communications equipment, clock-distribution modules, frequency-standard interfaces, and legacy digital systems. The 8-SOIC outline supports conventional surface-mount assembly, although final board compatibility must be confirmed against the exact pin configuration. Technically, the PLL architecture compares the incoming clock with a feedback signal, drives the charge pump from the phase-error information, and adjusts the voltage-controlled oscillator until the loop approaches lock. The external components and loop-filter requirements should therefore be taken directly from the manufacturer datasheet. Because the available device summary does not state the complete input-frequency range, lock range, jitter, supply voltage, or operating-temperature limits, those characteristics should not be inferred from the 120 MHz headline value. Typical clock-synchronization uses include recovering a coherent timing relationship in communications equipment, distributing a system reference to one internal clock domain, and supporting laboratory or industrial timing modules. The non-differential interface is particularly useful where the source and destination use single-ended CMOS clocks. Conversely, systems requiring differential clock I/O, programmable multiplication, fractional synthesis, or a known higher-ratio architecture need a different PLL family. Before layout, confirm the pin names, exposed connections, supply requirements, and recommended loop filter in the manufacturer datasheet. Place the PLL close to the clock source and sensitive clock-consuming circuitry, route outputs as short as practical, and maintain a continuous ground reference. Avoid introducing long stubs or uncontrolled impedance discontinuities into clock traces because they can degrade edge quality and timing margin even when the nominal operating frequency is acceptable. This product page consolidates the documented architecture, operating frequency, ratio, interface type, package outline, design guidance, and sourcing workflow for engineers evaluating the ICS663MT. It also distinguishes confirmed characteristics from parameters that require confirmation during component review, helping teams assess fit, board compatibility, and supply continuity before committing to a production design.
ICS722M - 28MHz 3.3V CMOS VCXO | Renesas Electronics
Renesas Electronics ICS722M is a 28 MHz voltage-controlled crystal oscillator, or VCXO, with a 3.3 V power supply, CMOS output, and 8-pin SOIC surface-mount package. The device is a low-cost, low-jitter oscillator intended to replace discrete VCXO modules while providing integrated frequency-control functionality in a compact surface-mount footprint. Its nominal operating frequency is 28 MHz, with source material also identifying the product as a 27 MHz-class VCXO; the exact nominal-frequency wording should therefore be confirmed against the manufacturer datasheet before release. A voltage-controlled crystal oscillator is a frequency-control IC built around a crystal resonator and an adjustable oscillator circuit. A VCXO belongs to the broader oscillator hierarchy, which includes crystal oscillators, frequency dividers, clock generators, phase-locked loops, and timing ICs. Unlike a fixed-frequency crystal oscillator, a VCXO permits its output frequency to be adjusted within a manufacturer-specified control range, making it useful when small frequency corrections are required for clock synchronization, filtering, or signal conversion. The supplied product information identifies the ICS722M as a low-cost, low-jitter, high-performance 3.3 V VCXO with a CMOS output. It is available in an 8-SOIC package and is listed in tube packaging by one distributor. Its single-oscillator architecture supports applications requiring one independently adjustable clock rather than a multi-output PLL or clock-generator network. The 3.3 V supply operation also allows integration with 3.3 V CMOS logic without a level-shifting stage when the associated interface voltage levels are compatible. The IC accepts a crystal input according to the distributor specification summary and produces one CMOS clock output. This arrangement separates the stable resonant element from the voltage-controlled oscillator circuitry, supporting accurate frequency generation with electrical tuning capability. The exact tuning range, control sensitivity, initial frequency accuracy, temperature stability, RMS jitter, operating-temperature range, output load requirements, and supply-current limits are not stated in the supplied source data and must be obtained from the manufacturer datasheet before production design. Typical uses include communications-clock recovery, frequency conversion, tunable oscillator modules, digital signal-processing clock trees, and embedded systems that need a small frequency adjustment around a crystal reference. In such designs, the control voltage should remain within the datasheet-specified tuning range, and the output must be properly terminated for reliable CMOS rise and fall times. The compact SOIC-8 package also makes the device suitable for lead-free surface-mount assembly, subject to the manufacturer’s recommended reflow profile and package qualification data. The primary design consideration is that voltage-controlled frequency adjustment is not interchangeable with wholesale frequency synthesis. The ICS722M offers a tuning function around its crystal frequency, whereas a PLL-based clock generator provides programmable multiplication and division. Engineers should compare pull range, sensitivity, jitter, phase noise, supply noise rejection, and load capacitance against the timing budget rather than selecting only by the 28 MHz headline frequency. This page consolidates distributor inventory, package, voltage, output, and oscillator-class information with a traceable source list, practical application guidance, and clearly documented data gaps. It also distinguishes verified product facts from parameters that require confirmation from the Renesas or original IDT manufacturer datasheet.
ICS722MT - 28MHz 3.3V Low-Jitter VCXO | Renesas Electronics
The Renesas Electronics ICS722MT is a 28 MHz voltage-controlled crystal oscillator (VCXO) IC designed for low-cost, low-jitter frequency-control applications in a 3.3 V power environment. The device accepts a crystal input and provides a CMOS output, with a maximum frequency of 28 MHz and an input-to-output ratio of 2:1. It is packaged in an 8-pin SOIC, making it suitable for compact communications, timing, and clock-generation designs that require adjustable frequency control rather than a fixed-frequency oscillator. A VCXO is a crystal-based oscillator whose output frequency can be varied with an external control voltage. In the broader electronics hierarchy, a VCXO is a frequency-control IC and a specialized form of oscillator, while also belonging to the clock and timing component family. It is commonly used when a system needs a modest frequency correction, tuning, or synchronization capability that a conventional fixed-frequency crystal oscillator cannot provide. The ICS722MT combines a 3.3 V operating design with CMOS output and an integrated voltage-controlled crystal oscillator architecture. Its stated purpose is to replace expensive discrete VCXO modules while maintaining low jitter and high performance. The 28 MHz maximum frequency makes it appropriate for clocking, communication, modulation, and frequency-synthesis interfaces operating below the device’s upper frequency limit. The 8-SOIC package provides a conventional surface-mount footprint with exposed pins suitable for automated assembly and PCB integration. The absence of an internal PLL means the device is intended for direct crystal-based voltage-controlled frequency generation rather than programmable multi-ratio frequency synthesis. This simpler architecture can help reduce design complexity when the required adjustment range and jitter performance are adequately matched to the target system. Typical uses include RF and wireless communication modules, data-conversion systems, instrumentation, and embedded timing networks where an adjustable reference clock is useful. In these applications, the VCXO can compensate for crystal tolerances, temperature-related frequency shifts, or small system-level timing corrections. The CMOS output can interface with compatible digital timing and signal-chain circuitry when voltage, rise-time, and drive requirements are checked. Designers should pay attention to the control-voltage range, gain, tuning sensitivity, load capacitance, output waveform, and stability characteristics when evaluating the ICS722MT for a new board. The crystal choice and the surrounding input network are as important as the IC itself because they determine the usable tuning range and phase-noise performance. This page combines the manufacturer-linked technical identity, package information, comparison fields, and practical design guidance to support component selection and PCB planning.
ICS728M Clock & Timing IC | Technical Overview
The Renesas Electronics ICS728M is an integrated clock and timing component associated with the ICS family of timing ICs. The supplied verification data did not include a manufacturer datasheet, product page, distributor listing, or confirmed technical parameter table, so its operating frequency, supply voltage, output configuration, package, pinout, and lifecycle status cannot be stated responsibly. This page therefore distinguishes confirmed identification from parameters that still require manufacturer-document verification. A clock and timing IC is an integrated circuit used to generate, distribute, condition, or select clock signals within electronic systems. Such devices belong to the semiconductor hierarchy and ultimately support digital logic, communications, industrial control, consumer equipment, and data-processing systems. An ICS-series timing device may provide multiple outputs, programmable frequencies, low-jitter operation, or specific clock-generation functions, but no verified evidence in the supplied dataset establishes which capabilities apply to the ICS728M. The primary engineering parameters to verify include the nominal input reference frequency, supported output frequencies, number and type of output clocks, supply-voltage range, jitter performance, temperature range, and package dimensions. Because none of these values were returned by the failed real-time search, this record does not infer them from similarly named ICS devices. Obtain the manufacturer datasheet and ordering information before sizing decoupling, setting filtering components, or designing a replacement board. Clock-integrity analysis also depends on whether the device is intended as a source, a jitter cleaner, a buffer, a synthesizer, or a distribution element. The verified results contained no functional block diagram or application circuit, so the exact architecture and supported use cases remain unconfirmed. Engineers should review the recommended reference circuit, output-load limits, termination guidance, and power-supply sequencing requirements directly in the applicable manufacturer documentation. Potential design locations for a clock and timing IC include processor clocking, communication-interface timing, data-conversion systems, and embedded control platforms. These are category-level use cases only and are not a claim that the ICS728M supports every listed architecture. Final suitability must be established by matching the verified clock-frequency range, supply rails, I/O standards, jitter budget, package footprint, and environmental requirements to the target design. The most important design precaution is to avoid assuming pin compatibility from the MPN suffix alone. Before procurement or substitution, verify the exact package marking, lead assignments, exposed-pad requirements, maximum supply voltage, output drive, and reference-circuit values. A same-family name or similar distributor listing is not sufficient evidence of a drop-in replacement. This record adds information beyond an unstructured search-result list by documenting the verification gap, the parameters required for engineering review, and the evidence needed before selecting alternatives. It also supports honest procurement comparisons without presenting unverified clock specifications, prices, pin assignments, or drop-in claims as fact.
ICS728MT - 27MHz VCXO/PLL Clock Generator | Renesas
The Renesas ICS728MT is a 27 MHz voltage-controlled crystal oscillator with an integrated phase-locked-loop frequency doubler, supplied in an 8-pin SOIC surface-mount package. Its specified 3.3 V operating supply range is 3.15 V to 3.45 V, while the circuit combines VCXO frequency control and PLL multiplication in one clock-generation device. The nominal input is a crystal, and the output is a clock signal with a stated input-to-output ratio of 2:1. A VCXO is a crystal oscillator whose output frequency can be adjusted with an external control voltage. A PLL, or phase-locked loop, locks a controlled oscillator to a reference frequency and can multiply that frequency. The ICS728 combines these functions into a single IC, allowing a system to derive a stable 27 MHz clock from an external crystal while retaining voltage-based frequency trimming. In the clock-generation hierarchy, the ICS728MT belongs to the voltage-controlled oscillator and clock-generator class of clock and timing integrated circuits. The principal operating features are the 27 MHz maximum frequency, one clock circuit, 2:1 input-to-output ratio, crystal input, clock output, and integrated PLL. These characteristics make the device suitable for frequency control, reference-clock synthesis, communications equipment, test and measurement systems, and digital subsystems requiring a locally adjustable clock. Its 3.3 V supply requirement also aligns it with modern low-voltage digital platforms. Technically, the IC separates reference generation from output multiplication. The crystal establishes the frequency reference, while the VCXO control input permits fine tuning of the oscillator. The PLL stage provides the frequency-doubling function needed to reach the 27 MHz operating point. This topology can simplify clock trees by reducing the number of separate oscillator and multiplier packages, although loop stability, control-voltage range, output jitter, and crystal startup behavior remain important qualification items. Typical implementations include telecommunications clock trees, instrumentation timing, industrial control systems, embedded data-acquisition equipment, and communication transceivers requiring a stable reference clock. The external crystal and any PLL loop components should be selected with the manufacturer’s reference circuit and layout guidance to preserve frequency accuracy and startup reliability. A key design consideration is the distinction between a nominal 27 MHz output and the tolerance of the complete clock system. Crystal accuracy, VCXO control voltage, PLL loop design, temperature drift, and power-supply noise can all affect the final output. PCB layout should keep the crystal path short and isolate the control and supply paths from sensitive analog or high-speed digital routing. This page consolidates the device function, operating limits, package information, application guidance, and design considerations into an engineering-focused reference. It also distinguishes verified device characteristics from parameters that require confirmation in the manufacturer datasheet before a new design is released for production.
IS82C54Z96 - 8MHz CMOS Programmable Interval Timer | Renesas
The Renesas IS82C54Z96 is a CMOS Programmable Interval Timer manufactured using an advanced 2 micron CMOS process, supplied in a 28-pin PLCC package. It supports clock input frequencies up to 8 MHz and operates from a 4.5 V to 5.5 V single supply. According to the Renesas 82C54 datasheet, the device integrates three independently programmable and functional 16-bit counters, each capable of binary or BCD counting and of handling clock inputs up to 8 MHz (82C54), 10 MHz (82C54-10), or 12 MHz (82C54-12). A programmable interval timer (PIT) is a counter IC that generates precise time delays, event counting, and frequency-division functions under software control. As a category, the 82C54 sits within the broader timer/counter IC family, which in turn belongs to clock and timing semiconductors, bridging discrete counters, real-time clocks, and microcontroller peripherals. The IS82C54Z96 is the industrial temperature range variant, distinguished by the Z96 suffix indicating 28-PLCC packaging on tape-and-reel. Key features of the IS82C54Z96 include six programmable counter modes (Mode 0 interrupt on terminal count, Mode 1 hardware retriggerable one-shot, Mode 2 rate generator, Mode 3 square wave generator, Mode 4 software-triggered strobe, and Mode 5 hardware-triggered strobe), three independent 16-bit down counters, read-back command for inspecting counter latches and status, and CMOS low-power operation. The 82C54 is the CMOS successor to the original Intel 8254/8253 NMOS parts, maintaining full software compatibility while delivering lower power consumption. Typical applications include industrial control event counting, motor speed measurement via frequency division, baud-rate generation for legacy serial ports, programmable pulse generation for stepper motor drive signals, and embedded system timing in PC/104, VME, and CompactPCI single-board computers that still integrate the classic x86 peripheral set. The wide industrial operating temperature range of -40 C to +85 C and the robust CMOS process make it well suited for factory floor installations. When designing with this part, ensure the read and write strobes (RD, WR) and the chip-select logic follow the standard 82C54/8254 control-word protocol. Each counter must be initialized with a control word before being loaded with a count, and back-to-back LSB/MSB reads of a 16-bit count are required to guarantee coherent data. The -Z96 suffix on the Renesas ordering code designates the industrial temperature grade and the tape-and-reel packaging option.
LM-555N - Single 555 Timer, 8-PDIP | Texas Instruments
The Texas Instruments LM-555N is a single 555-type timer and oscillator integrated circuit packaged in an 8-pin PDIP. The verified distributor result identifies it as an 8-PDIP device from Harris Corporation, while the official TI family page identifies the LM555 as a highly stable 555 timer. The target MPN is therefore associated with the classic timer functionality, but the supplied data does not provide verified electrical ratings, timing limits, temperature range, or lifecycle details for the exact LM-555N ordering code. What is a 555 timer? A 555 timer is a programmable timer and oscillator integrated circuit used to generate delayed pulses, produce periodic waveforms, debounce inputs, or control relays and indicators. Its internal blocks typically include a voltage reference, comparators, a flip-flop, and a high-current output stage. In astable operation, external resistors and a capacitor set the oscillation period; in monostable operation, an external timing capacitor sets the output pulse width. The verified Harris product description identifies the LM555N for timing-delay and oscillator applications in commercial, industrial, and military equipment. The verified product listing calls it a “555 Type, Timer/Oscillator (Single) IC” and specifies an 8-PDIP package. The official TI product page describes the LM555 family as a highly stable 555 timer and provides family-level documentation, but the supplied material does not expose the exact LM-555N datasheet values. Because the target MPN includes a hyphen while the verified distributor listing uses LM555N, engineers should confirm the exact package, suffix, manufacturer, and electrical limits against the applicable manufacturer documentation before substituting or releasing a production design. The verified result also shows a distributor listing from Rochester Electronics under the Harris Corporation name; Harris Corporation is not in the supplied Manufacturer Reference, so the brand field follows the target context and the official TI source uses Texas Instruments. Typical uses include pulse generation, delay circuits, oscillators, indicator flashing, switch debouncing, and simple industrial control logic. Because the exact pinout, package details, and ratings were not included in the verified data, this page does not infer those values. Check the original LM-555N datasheet and the manufacturer’s current documentation before layout or purchase.
LM555-MWC - 100kHz Timer/Oscillator Die | Texas Instruments
Texas Instruments LM555-MWC is a highly stable 555-type timer and oscillator integrated circuit with a maximum timing frequency of 100kHz, supplied as a rectangular die. It combines a precision timing element, a voltage comparator, a discharge transistor, and a flip-flop into one circuit capable of operating in astable, monostable, or bistable configurations. The die format is intended for manufacturers and qualified integrators that perform die-level inspection, bonding, encapsulation, or integration into a finished timer package. A 555 timer is a multivibrator and timing integrated circuit within the broader clock-and-timing IC hierarchy. In astable mode, its output switches continuously at a repetition rate determined by two external resistors and one capacitor. In monostable mode, it produces one timed output pulse after a trigger event. In bistable mode, a trigger can set or reset the output. The LM555 family is widely used to generate delays, produce pulses, provide simple oscillators, and trigger larger loads through an external switch. The LM555-MWC identifies the 100kHz-capable timer function and the die-based delivery option. External timing components determine the practical operating frequency in astable mode, while the circuit's internal reference and threshold arrangement govern pulse width and duty cycle. The available device information identifies a maximum supply current of 15mA and an industrial temperature range of -40°C to +85°C. The die's physical dimensions, pad geometry, and exposed surface details are not established by the product listing. Because this is a die rather than a finished molded package, its electrical function follows the Texas Instruments LM555 architecture, but its mechanical implementation must be defined by the integrator. Supply voltage limits, threshold reference accuracy, output-current capability, trigger and reset levels, and absolute maximum ratings should be confirmed from the LM555 datasheet before qualifying the die for a production design. The Rev. D datasheet also documents monostable operation as a common configuration for controlling an LED for a specified duration. Typical uses for the underlying LM555 timer function include LED and lamp drivers, pulse generators, missing-pulse detection, delayed-action circuits, simple audio oscillators, and industrial control or test modules. When implementing the die in a final package, attention must be paid to bonding parasitics, thermal paths, contamination control, and the final package's pin mapping. The timer frequency should also remain below the 100kHz device limit after accounting for component tolerances and parasitic capacitance. A key design consideration is that the die suffix does not describe a standardized PCB footprint. Engineers should create a bonding pad layout from the approved die documentation and electrically qualify the assembled part before production. If a packaged, directly orderable timer is required for prototyping or repair, use a finished 555 timer with the same functional architecture and verify its electrical limits against the design. This page organizes the LM555-MWC function, operating limits, application guidance, design cautions, and package-availability context into an engineering-oriented reference. It also distinguishes the verified die offering from finished-package alternatives so procurement and assembly teams can identify when a die-level supply strategy is appropriate.
LM555CM - 100kHz Single Timer | Texas Instruments | 8-SOIC
Texas Instruments LM555CM is a single 555-type timer and oscillator integrated circuit with a maximum frequency of 100 kHz, supplied in an 8-pin SOIC package. The device operates from 4.5 V to 16 V and supports both astable and monostable operation. Its timing can extend from microseconds to hours, while an external resistor and capacitor establish the relevant timing interval. The LM555/NE555/SA555 family is a widely recognized type of programmable timer and pulse generator used when a circuit requires controllable delay, repetition, or oscillation. A 555 timer is an analog timing block containing voltage thresholds, comparators, a flip-flop, discharge control, and an output stage. In astable mode, the output repeatedly switches between two voltage levels and the external timing network determines both the charging and discharging intervals. In monostable mode, the circuit produces one timed output pulse after a trigger. This LM555CM combines that established function with TTL-compatible interfacing and output-current capability, making it suitable for conventional digital control and timing systems. The verified operating range is 4.5 V to 16 V, and the listed maximum oscillator frequency is 100 kHz. The controller can source or sink up to 200 mA according to the manufacturer feature summary. Its timing-temperature stability is specified as 0.005%/°C, and the turn-off time is less than 2 µs. The SOIC-8 format permits conventional surface-mount assembly, while the available part information identifies the device as suitable for industrial control, pulse generation, delay, and oscillator implementations. Technically, the LM555CM is controlled by an external RC timing network rather than a digital register or crystal. In astable operation, the timing capacitor charges and discharges through external resistors while the internal thresholds determine when the output changes state. Duty cycle is adjustable, although the exact permitted resistance and capacitance combinations depend on the manufacturer timing equations. Because this is a classic analog timer rather than a precision digital synthesizer, its accuracy depends on component tolerances, temperature, supply stability, and the timing network. Typical uses include industrial pulse and delay circuits, LED flashers, debounce timers, basic clock generators, motor or relay timing, and laboratory test fixtures. The 200 mA output-drive capability can directly support compatible loads, while the 4.5 V minimum supply keeps the device compatible with common 5 V logic systems. The 16 V maximum rating also supports higher-voltage control designs when the surrounding circuit remains within the device ratings. When laying out a LM555CM circuit, place the timing capacitor and timing resistors close to their associated pins and keep the control-node bypass capacitor connection short. Decouple the supply rail near the IC, avoid long current-loop paths, and verify that reset and trigger levels satisfy the input thresholds. The unused voltage and control pins should be connected according to the manufacturer guidance, and output loads must remain within the verified drive limits. This product record combines verified manufacturer and distributor specifications, practical timer design guidance, package and pin information, and sourced drop-in alternatives. It is intended to help engineers identify the LM555CM quickly, compare equivalent SOIC-8 timers, and assess whether its 4.5 V to 16 V supply range and 100 kHz frequency capability fit the intended astable or monostable circuit.
LM555CMM - 555 Timer Oscillator 100kHz | Texas Instruments
Texas Instruments LM555CMM is a single 555-type timer and oscillator integrated circuit used for accurate time-delay generation, monostable pulse shaping, and free-running oscillation. The device operates from the LM555 timer family and is identified with a maximum oscillator frequency of 100 kHz. It is packaged in an 8-VSSOP package, and the exact pin assignments and electrical limits should be confirmed from the Texas Instruments LM555 datasheet before layout or replacement qualification. A 555 timer is a programmable analog timing building block. By combining an internal voltage reference, comparators, flip-flop, discharge transistor, and output stages with external resistors and capacitors, it can operate as a one-shot monostable circuit or as a continuously running astable oscillator. The LM555 family is widely used in industrial control, instrumentation, pulse generation, debounce circuits, converters, and low-cost embedded timing systems. It remains popular because it combines a simple external network with predictable logic-level outputs and flexible trigger and reset control. The LM555CMM’s key operating characteristics include its 100 kHz maximum oscillator frequency, 555 monostable or astable operating modes, trigger and reset functions, and 8-VSSOP surface-mount construction. The external timing network determines the delay or repetition rate, while the trigger and reset terminals allow synchronization, cascading, and fault-controlled shutdown. Because the timing accuracy depends on resistor tolerances, capacitor stability, and the internal threshold reference, component selection and PCB layout remain important in precision applications. In astable mode, two resistors and one capacitor establish the charge and discharge timing. The output waveform frequency and duty cycle are set by those external values, while the LM555 provides threshold comparison, discharge control, and a buffered output. In monostable mode, one resistor and one capacitor establish the output pulse duration, and a negative-going trigger creates the timed pulse. The reset terminal can inhibit operation during initialization or fault conditions. The LM555 is suitable for LED flash timing, pulse-width generation, debounce networks, simple clock circuits, tone generation, and general-purpose industrial control. Designers should check output-current limits, supply voltage, trigger and reset timing, and absolute maximum ratings against the manufacturer datasheet. For a new design, the trigger and reset paths should be kept short, timing capacitors should be positioned near the relevant pins, and unwanted pickup on high-impedance timing nodes should be minimized. This page provides a structured technical overview, verified manufacturer and distributor references, replacement guidance, application context, and design notes for engineers evaluating LM555CMM. It is intended to support component selection and circuit planning rather than replace the complete Texas Instruments datasheet.
LM555CMX - 100kHz Single Timer | Texas Instruments | 8-SOIC
The Texas Instruments LM555CMX is a single 555-type timer and oscillator with a maximum timing frequency of 100 kHz, housed in an 8-pin SOIC surface-mount package. It combines three complementary 5 kΩ comparators, an SR flip-flop, and a high-current output stage to support monostable, astable, and Schmitt-trigger timing circuits. The device is intended for timers from microseconds through hours, according to the manufacturer datasheet, and operates in the 0°C to 70°C commercial-temperature range. A 555 timer is a programmable timing integrated circuit that determines an output transition from the charging and discharging of an external timing capacitor. In the broader semiconductor hierarchy, the LM555 belongs to the timer and oscillator family, within clock and timing integrated circuits and power-management-adjacent signal-control devices. Its internal comparators and flip-flop allow an external resistor-capacitor network to establish delay, repetition rate, or pulse width without digital programming. The LM555CMX supports three principal operating modes. In monostable operation, a trigger pulse creates one timed output pulse. In astable operation, the output oscillates continuously and can produce a duty cycle below 50% when the discharge path is used. In Schmitt-trigger operation, the internal thresholds generate a clean output transition from a slowly changing analog voltage. These functions make the timer useful for pulse generation, delay circuits, missing-pulse detection, tone generation, and simple power-control timing. Its internal architecture is based on three comparators that monitor the timing-capacitor voltage, the trigger voltage, and the reset input. The flip-flop records comparator decisions, while separate bipolar output transistors provide a standard output and a higher-current discharge path. The 100 kHz operating limit establishes the upper end of the usable timing-frequency range, while the exact minimum and maximum timing values depend on the selected external resistance and capacitance. Typical applications include industrial control timers, LED flashers, audio tone generators, delayed relay activation, pulse-width shaping, and oscillator-based clocking for small embedded systems. The SOIC-8 package supports compact surface-mount assembly while preserving the familiar eight-pin 555 interface. A timing capacitor and associated resistors remain external, allowing the circuit designer to select timing values rather than relying on a fixed internal delay. The primary design consideration is preserving adequate timing-capacitor headroom for the trigger and threshold limits while keeping the discharge and control-node waveforms valid. Use the manufacturer's recommended resistor and capacitor ranges, account for component tolerances, and decouple the supply pin close to the device. Because this is a bipolar timer rather than a low-power CMOS timer, verify output-drive, supply-current, and timing requirements when operating from a constrained power source. This page combines the LM555CMX timing characteristics and package information with practical mode-selection guidance, pin-assignment context, drop-in alternatives, and design notes intended to accelerate schematic review, PCB planning, sourcing, and legacy-maintenance work.
LM555CN - 100kHz Single Timer | DIP-8 | Timing Control
The Texas Instruments LM555CN is a single 555-type timer and oscillator IC operating from 4.5 V to 16 V, with a maximum timing frequency listed as 100 kHz, in an 8-pin through-hole DIP package. It generates accurate timing pulses in monostable or astable configurations and includes trigger and reset terminals for external control. A 555 timer is a general-purpose timing controller within the broader clock and timing IC category. Its internal architecture combines a voltage reference, voltage comparators, a flip-flop, and a high-current output stage. Two resistors and one capacitor set the astable frequency and duty cycle, while one resistor and one capacitor set the monostable pulse delay. Key verified characteristics include a 4.5 V to 16 V supply range, a maximum frequency of 100 kHz, TTL-compatible interfacing, and support for both astable and monostable operation. The LM555CN is supplied as an 8-DIP device, matching the classic through-hole timer footprint and making it suitable for legacy control boards, educational hardware, prototypes, and repair applications. In astable mode, the output oscillates continuously between two threshold levels set by the external timing network. In monostable mode, a low-going trigger starts one timing cycle and produces a timed output pulse. The reset input can force the timer into its stable state, while the output stage provides the drive needed for standard digital logic loads. Typical applications include pulse generation, delay circuits, oscillators, debounce timers, PWM generation, LED flashers, and industrial control pulse shaping. Because the DIP package exposes all eight pins, the device is also convenient for breadboard prototyping and timing experiments where a surface-mount package would be inconvenient. When designing a replacement circuit, verify trigger polarity, output polarity, output-drive requirements, and timing tolerance rather than assuming every 555 variant is electrically identical. CMOS alternatives may have lower supply current but different output-drive and timing characteristics, while bipolar alternatives generally provide stronger output sourcing and sinking capability. This page combines the verified LM555CN supply, package, frequency, and timing-mode information with same-footprint alternatives, application guidance, and practical selection criteria that are not consolidated in a single manufacturer datasheet.
LM556 - Dual Timer 4.5-16V | Texas Instruments
The Texas Instruments LM556 is a dual timer integrated circuit containing two independent 555-type timing sections in a 14-pin narrow SOIC package. Each section can operate as an astable oscillator or a monostable one-shot, while sharing only the common VCC and ground connections. The device operates from 4.5 V to 16 V, supports timing intervals from microseconds to hours, and provides TTL-compatible output drive. A dual timer is an integrated timing circuit that combines threshold sensing, trigger control, discharge switching, and an output stage in each timer section. In the broader semiconductor hierarchy, the LM556 is a timer and oscillator within clock and timing integrated circuits. Its two independent sections can generate delayed pulses, control switching waveforms, flash lamps, pace sequential events, or provide two related timing functions without requiring two separate single-timer packages. Each LM556 timing function uses an external timing resistor and timing capacitor. The trigger input can initiate a one-shot pulse, while the threshold input provides feedback for astable oscillation. A control-voltage input permits the timing reference to be adjusted within the limits defined by the manufacturer datasheet. The two timer sections operate independently, so one circuit can perform timing while the other handles a related but separate delay or pulse-generation function. The LM556 operates across a 4.5 V to 16 V supply range. Many operating characteristics apply from 0 °C to 70 °C, while the Electrical Characteristics section identifies parameters that vary with voltage or temperature. The cited temperature-stability figure is 0.005% per °C, indicating how the timing characteristic can change across temperature. The output stage is TTL compatible, which supports interfacing with standard digital logic when the operating and load conditions are appropriate. Typical uses include two-stage sequential timers, LED and lamp flashers, pulse-width control, delayed-action circuits, simple audio pulsation, industrial control timing, and laboratory pulse generators. Because each section can be configured independently, the LM556 is especially useful when a design needs two timing functions but does not justify two separate timer packages. The shared supply and ground pins also simplify the power architecture. The principal design consideration is ensuring that timing-component values, discharge-device limits, control-voltage behavior, and output loading remain within the datasheet limits. Because both sections share VCC and ground, bypassing and return-current paths should support both timer sections operating simultaneously. Pin assignments should be checked against the exact SOIC footprint before PCB release. This page consolidates the LM556 timing functions, operating limits, package details, application guidance, and verified replacement information into an engineering-focused reference. It also identifies where pin-compatible substitution requires additional datasheet and qualification review rather than treating package similarity alone as sufficient approval.
LM556CM - Dual 555 Timer | Fairchild | Industrial
The Fairchild Semiconductor LM556CM is a dual 555-type timer and oscillator integrated circuit packaged in a 14-SOIC. It operates from 4.5 V to 16 V, supports timing or oscillation functions up to 3 MHz, and provides TTL-compatible normally on and normally off outputs. The device combines two independent timer sections in one package, reducing component count in circuits that require two adjustable time intervals or dual-frequency outputs. A 555-type timer is a programmable timing IC that can operate as an astable oscillator or a monostable pulse generator. In astable mode, external resistors and a capacitor establish repetitive switching, while the output produces a continuous waveform. In monostable mode, a trigger starts one timed output pulse. The LM556CM places two such timer functions in a single 14-SOIC package, making it useful where PCB area is constrained. The principal verified specifications include a 4.5 V to 16 V supply range, operation up to 3 MHz, and TTL-compatible normally on and normally off outputs. The dual architecture allows both timer sections to be used together or independently. Its 14-SOIC package is a surface-mount package compatible with conventional automated PCB assembly, although exact board dimensions and pin mapping must be confirmed against the selected manufacturer datasheet before layout. The LM556CM combines two classic 555-type timing blocks with separate timing and output functions. Its operating range supports conventional 5 V and 12 V system rails, while the stated upper limit of 16 V provides additional design headroom. The 3 MHz maximum operating frequency identifies it as a general-purpose timing solution rather than a precision real-time-clock or low-frequency timer. Typical uses include industrial pulse generation, retriggerable delay circuits, dual-tone generation, LED flashers, motor or solenoid timing, test equipment, and general control systems. Two timers in one package can simplify designs that need independent delays, complementary pulse outputs, or two adjustable waveforms while reducing the number of external IC footprints. Circuit design should account for timing-component tolerances, supply decoupling, output loading, and the required trigger and reset levels. Because the verified data identifies the package and core ratings but does not provide a complete pin map or detailed output-current limits, engineers should verify those details in the manufacturer datasheet for the exact branded source being procured. This page consolidates verified distributor data, source links, package information, drop-in sourcing alternatives, and practical selection guidance. It is designed to support faster engineering comparison while clearly identifying specifications that require confirmation from the exact manufacturer datasheet.
LM556CMX - Dual 100 kHz Timer | Texas Instruments | SOIC-14
Texas Instruments LM556CMX is a dual timer and oscillator integrated circuit containing two independent timing sections in a 14-pin SOIC package. Each section can generate accurate time delays or oscillations using external timing resistors and capacitors, allowing one package to support two timing functions. The device is identified as a commercial-grade dual timer with a nominal 100 kHz timing-frequency rating and a narrow SOIC body measuring 0.154 inch, or 3.90 mm, in width. A dual timer such as the LM556CMX belongs to the timer and oscillator class of clock-and-timing semiconductors. Within that category, it extends the familiar 555 timer architecture into two independent channels. Each channel combines an external timing network with internal threshold, trigger, discharge, output, and control functions, making the device useful for monostable pulse generation, astable oscillation, delay circuits, and periodic control functions. The two timing sections operate independently, allowing different delay intervals or frequencies to be produced within one device. This integration can reduce the component count in systems requiring two related timing functions. Both sections use external resistor-capacitor timing networks, so component tolerance and parasitics directly influence timing accuracy. The SOIC-14 surface-mount package supports compact PCB construction and automated assembly. LM556CMX is associated with the classic bipolar 555-family implementation. The bipolar approach uses conventional transistor structures within the integrated circuit, while the external timing network determines the principal delay or oscillation period. Designers should account for supply voltage, temperature, resistor tolerance, capacitor tolerance, output load, and discharge-device behavior when determining whether a timing design meets its accuracy requirement. Typical applications include dual one-shot pulse generation, dual astable oscillators, industrial sequence timers, delayed relay or gate triggering, periodic pulse generation, and general-purpose control logic in test equipment. The 100 kHz nominal classification makes it appropriate for moderate-speed timing functions rather than high-frequency precision waveform generation. Design the timing resistors and capacitors so the selected operating mode remains within the device's allowed discharge and timing limits. Keep the timing node connections short, provide adequate bypassing near the supply pins, and validate operation across temperature and supply-voltage tolerances. The SOIC footprint also requires attention to solder-joint inspection and analog-noise coupling when the device controls sensitive timing or measurement circuits. This product page consolidates the LM556CMX package information, 100 kHz timer classification, functional context, drop-in alternatives, comparison parameters, and practical design guidance. It provides engineering context beyond a basic catalog entry while directing buyers to the Request a Quote form for current commercial terms.
LM556CN - Dual Timer, 4.5-16V, 14-DIP | onsemi
The onsemi LM556CN is a dual-programmable timer integrated circuit containing two independent 555-compatible timer sections in a 14-pin DIP package. It operates from 4.5 V to 16 V, supports both astable and monostable operation, and provides timing intervals ranging from microseconds to hours. Each timer uses an external resistor and capacitor to establish its timing characteristics, allowing one package to replace two separate single timers. A dual timer is a timing and oscillator IC that generates controlled time delays or periodic waveforms. Within the product hierarchy, the LM556CN belongs to the timer and oscillator class, the clock and timing category, and ultimately the broader semiconductor and integrated-circuit ecosystem. Its two timer sections can operate independently, making it useful when a design needs two related timing functions without allocating two separate packages. Verified device features include operation in both astable and monostable modes, high output current with TTL compatibility, adjustable duty cycle, and temperature stability of 0.005% per degree Celsius. The specified supply range of 4.5 V to 16 V supports both conventional 5 V logic systems and higher-voltage industrial control environments. Many operating characteristics apply from 0°C to 70°C, as stated in the manufacturer datasheet. Each internal timer includes threshold, trigger, output, reset, discharge, and control functions. In monostable mode, the circuit produces one timed pulse after a trigger event. In astable mode, it repeatedly charges and discharges an external timing capacitor and drives an output waveform. The output stage can sink and source relatively high current and remains TTL compatible, reducing the need for added output-driver circuitry in many applications. Typical uses include industrial pulse and delay generation, LED and indicator flashing, periodic sampling triggers, simple clock or oscillator circuits, and two-channel debounce or delay systems. The DIP-14 package also supports through-hole insertion and replacement of two discrete 555 timers, although legacy DIP construction should be considered for new compact designs. Designers should preserve the timing-capacitor and timing-resistor connections near the appropriate IC pins and account for temperature and supply sensitivity when setting long delays. Decoupling should minimize supply disturbances, while reset and trigger signals require suitable logic levels and clean transitions. Verify the exact pin functions and electrical limits in the manufacturer datasheet before layout or production use.
LM567H/B - General-Purpose Tone Decoder | Rochester Electronics
Rochester Electronics, LLC LM567H/B is a general-purpose tone decoder integrated circuit designed to activate a saturated transistor output when an input signal falls within its passband. The verified source describes an I and Q detector driven by a voltage-controlled oscillator, with external components independently setting the center frequency and bandwidth. The device is supplied in a bulk package under the LM567H/B manufacturer part number, while the verified listing price starts at $34.9026 as of 2026-10-28. A tone decoder is a specialized phase-locked-loop signal-processing circuit. In the LM567 and LM567C family, the oscillator establishes the internal reference frequency, the quadrature detectors evaluate the incoming waveform, and the loop locks when the input is within the selected passband. The output transistor provides a grounded switch indication rather than a precision analog output, making the LM567H/B suitable for tone detection, signaling, remote control, communications, and industrial control functions. The verified manufacturer-linked description identifies externally adjustable center-frequency and bandwidth networks as central implementation features. Those networks allow one decoder circuit to target different operating frequencies without changing the integrated circuit. Designers must still determine the exact package dimensions, pin numbering, electrical limits, temperature range, and timing limits from the manufacturer datasheet before releasing a PCB or production design because those values are not present in the supplied verification excerpts. Typical uses include detecting an audio-frequency command tone, acknowledging a transmitted carrier, recognizing a legacy signaling frequency, or providing a hardware threshold in a control system. The transistor output can drive a downstream stage only after its current, voltage, and timing capabilities are confirmed from the datasheet. A system designer should also verify startup behavior, capture bandwidth, frequency tolerance, and supply-voltage requirements for the exact LM567H/B ordering code. Because this Rochester Electronics order code includes a /B commercial suffix and is offered in bulk packaging, procurement should confirm lifecycle status, stock, lot traceability, and equivalent original-order codes before committing to a volume build. The verified distributor listings indicate in-stock status or market availability, but quantity-dependent pricing beyond the listed starting price is not supplied. This page distinguishes directly verified facts from parameters that require manufacturer documentation, avoiding unsupported claims while preserving useful design context for engineers.
LMX2325TMX-G - 2.5GHz PLL Frequency Synthesizer | Rochester
The Rochester Electronics LMX2325TMX-G is a PLL (phase-locked loop) frequency synthesizer IC with a maximum operating frequency of 2.5 GHz, housed in a 20-pin TSSOP (TMX) surface-mount package. It accepts CMOS/TTL inputs and produces CMOS outputs, integrating a single PLL circuit with prescaler logic intended for RF and wireless local-oscillator generation. The device is supplied on Tape-and-Reel and is currently offered through authorized distributor inventory as of 2026-10-08. A PLL frequency synthesizer is a closed-loop feedback circuit that locks a voltage-controlled oscillator (VCO) to a stable, low-frequency reference, multiplying that reference up to a precisely programmable frequency. PLLs sit at the heart of RF transceivers, base stations, satellite receivers, and test instrumentation, where they generate the local oscillator (LO) signals required for frequency conversion. Within the broader system hierarchy, the LMX2325TMX-G belongs to the class of clock generators / frequency synthesizers > clock and timing > integrated circuits > semiconductors. Key features include a maximum synthesized frequency of 2.5 GHz, a single PLL channel, CMOS/TTL compatible I/O, and a 20-pin TSSOP footprint that simplifies hand-soldering and rework. The device targets cost-sensitive RF designs where a high-frequency integer-N or fractional-N PLL is required without the overhead of a fully integrated RF transceiver. Because it is a Rochester Electronics part, it is supplied as a continued-manufacturing or factory-stocked variant of the original Texas Instruments / National Semiconductor LMX2325TMX die. Architecturally, the LMX2325TMX-G combines a phase-frequency detector, charge pump, programmable feedback divider, and reference divider on-chip, while the external VCO, loop filter, and reference crystal complete the closed loop. Compared with fully integrated fractional-N PLLs, integer-N architectures of this generation typically exhibit finer phase-noise performance at the expense of channel spacing resolution. Typical applications include cellular base-station synthesizers, point-to-point microwave links, satellite LNB down-converters, cable-TV tuner head-ends, and general-purpose RF laboratory signal sources. The 20-pin TSSOP footprint makes it convenient for both new designs and legacy board replacements. When designing with this part, pay close attention to the loop-bandwidth trade-off (faster lock versus cleaner phase noise) and ensure the charge-pump current matches the chosen external loop filter components. Confirm that the upstream reference oscillator is clean and stable, since the synthesizer multiplies any reference noise by 20*log(N) dB inside the loop bandwidth. This page synthesizes distributor pricing as of 2026-10-08, same-package drop-in alternatives, and practical design considerations not found in the original manufacturer datasheet.
LTC6992IS6-1 - TimerBlox V-Controlled PWM, 3.81Hz-1MHz | ADI
The Analog Devices LTC6992IS6-1 is a silicon oscillator IC with analog voltage-controlled pulse width modulation (PWM) capability from the TimerBlox family, housed in a 6-pin TSOT-23 (S6) package. It operates over a wide output frequency range of 3.81 Hz to 1 MHz and accepts a single supply from 2.25 V to 5.5 V. The output is a CMOS rail-to-rail pulse train whose duty cycle is linearly controlled by a voltage on the MOD pin over the range 0.1·VSET to 0.9·VSET, clamped to 5%-95% outside that window. A silicon oscillator (a.k.a. programmable timer IC) is a solid-state device that generates a precision frequency or duty-cycle-controlled waveform without any crystal, ceramic resonator, or external capacitor. Silicon oscillators sit within the broader class of timer ICs -> clock generators -> timing ICs -> clock & timing products -> semiconductors, and they eliminate the mechanical fragility, start-up delay, and frequency tolerance issues of quartz-based oscillators. Key features include: a single resistor RSET programs the master frequency from 3.81 Hz to 1 MHz across four decades; the MOD pin accepts 0 V to 1 V to set duty cycle; ±15% frequency accuracy with no external trim; 1.1 mA typical supply current; CMOS output drive capable of sourcing/sinking 20 mA; and a -40°C to +125°C industrial operating range. The LTC6992-1 variant output clamps at 5%/95% duty-cycle limits outside the linear range rather than stopping oscillation, which is the differentiating behavior across the -1/-2/-3/-4 family members. Typical applications include analog-to-PWM signal conditioning for low-cost digital isolation, variable duty-cycle LED dimming and motor speed control, switched-capacitor driver clocks, low-cost PWM DAC replacement, and digitally-controlled power-supply feedback. Designers value the LTC6992 for delivering a complete, trimmed PWM source in a 6-pin SOT package that needs only a single 100 kΩ-range set resistor.