Clock & Timing
بەرهەمەکان (970+)
ADF4002SRU-EP - 400MHz 1-Channel RF PLL | Analog Devices
Analog Devices ADF4002SRU-EP is a single-channel RF clock and frequency synthesizer with phase-detector functionality, a maximum listed operating frequency of 400 MHz, and a 16-lead TSSOP package measuring 0.173 inches wide by 4.40 mm long. It belongs to the clock and timing IC category and combines frequency synthesis and phase comparison functions for RF signal-chain designs. A phase-locked loop, or PLL, is a feedback-control system that compares a reference signal with a divided output signal and drives an error correction toward frequency and phase lock. Within the clock and timing hierarchy, a PLL frequency synthesizer supports local-oscillator generation, clock multiplication, demodulation, modulation, and frequency translation. The ADF4002SRU-EP is intended for systems where one synthesizer channel is sufficient and a compact surface-mount footprint is preferred. The principal identified specifications are a 400 MHz maximum operating frequency, one synthesizer channel, and a 16-TSSOP package. Its phase-detector role is significant because the device can participate in a closed feedback loop rather than operating as an open-loop clock source. The single-channel architecture simplifies board planning when the system does not require multiple independently programmed synthesis paths. The package also supports conventional surface-mount assembly rather than through-hole insertion. ADF4002SRU-EP is based on an Analog Devices PLL product family intended for local oscillators in the up-conversion and down-conversion sections of wireless receivers and transmitters. In such systems, a phase detector and frequency synthesizer establish the reference relationship needed by a feedback loop. The integration of these functions can reduce the number of separate timing components required around an RF signal chain, while the dedicated RF-oriented part family keeps the architecture focused on frequency generation and phase control. Typical uses include wireless receiver and transmitter local oscillators, RF up-conversion and down-conversion chains, phase-control loops, and compact communication equipment. It can also serve as the timing element in systems that derive an internal coherent signal from an external reference. Product selection should begin with the intended reference and synthesized frequencies, loop bandwidth requirements, channel count, supply limits, temperature range, and the required output configuration. PCB implementation should preserve clean separation between sensitive reference and feedback paths, the synthesizer output, and the loop-filter network. Keep the loop-filter components close to their associated device pins, provide short ground returns, and follow the manufacturer pin and layout guidance for the 16-TSSOP footprint. Confirm capacitance, voltage, and current limits against the manufacturer datasheet before releasing a production design. This page organizes the exact package, frequency, channel, and positioning information for ADF4002SRU-EP alongside practical RF-layout guidance, application fit criteria, and a careful assessment of documented alternatives. It also distinguishes true pin-compatible replacement candidates from parts that use a different package or provide a different clock architecture.
ADF4002SRUZ-EP - RF PLL Frequency Synthesizer | Analog Devices
The Analog Devices ADF4002SRUZ-EP is an RF clock and frequency synthesizer with a phase detector, precision charge pump, programmable reference divider, and programmable N divider. It is supplied in a 16-pin TSSOP package measuring 4.40 mm wide and supports the defense and aerospace product qualification baseline described for the ADF4002-EP family. Its stated military temperature range is −55°C to +125°C. A frequency synthesizer is a timing IC that locks an output oscillator to an external reference. The ADF4002 family implements local oscillators in the upconversion and downconversion sections of wireless receivers and transmitters. Its architecture includes a low-noise digital phase-frequency detector, a precision charge pump, a programmable reference divider, and a programmable N divider. The 14-bit reference counter permits selectable reference-input division ratios, while the N counter supports programmable integer multiplication. The ADF4002SRUZ-EP is identified specifically as an enhanced-product ordering code rather than the ordinary ADF4002 designation. Analog Devices states that ADF4002-EP supports defense and aerospace applications using an AQEC standard. The product family also uses controlled manufacturing with one assembly and test site and one fabrication site, providing a defined manufacturing baseline for long-life programs. The principal benefit of the device is integration: a phase-frequency detector, charge pump, counters, and programmable feedback path are combined in one compact 16-pin TSSOP package. This reduces the number of external timing components required around a local-oscillator loop. The 14-bit reference counter provides finer reference-ratio control than a fixed divider, while the programmable N counter supports synthesized-output selection for RF signal-chain architectures. Typical uses include wireless receiver and transmitter local oscillators, RF upconversion and downconversion stages, communications equipment, and defense or aerospace electronic systems. The ADF4002 family is also supported by dedicated evaluation hardware. Analog Devices offers the EVAL-ADF4002 platform for controlling the synthesizer through an SDP controller, providing a practical way to evaluate divider programming, lock behavior, and reference configuration before integrating the IC into production hardware. Layout and loop-filter design remain central to dependable PLL operation. Keep the reference and feedback routes compact, maintain a continuous ground return, place the charge-pump and loop-filter network close to the device, and isolate sensitive reference routing from high-energy RF paths. Verify acquisition range, phase noise, lock time, and spur performance across the intended reference and output-frequency ranges rather than relying on a single nominal condition. This page combines the exact package and enhanced-product details, application guidance, technical comparison information, and practical design notes needed to evaluate the ADF4002SRUZ-EP as a programmable RF PLL building block for demanding timing systems.
ADF4007BCP - 7.5GHz Divider/PLL Synthesizer | Analog Devices
The Analog Devices ADF4007BCP is a high-frequency divider and phase-locked-loop synthesizer with 7.5 GHz RF bandwidth, a 120 MHz maximum phase-frequency-detector frequency, and a 20-lead LFCSP package with an exposed pad. It operates from a 3.3 V supply, supports 3 V systems, and includes a separate charge-pump supply for an extended tuning-voltage range. A phase-locked loop, or PLL, is a feedback-controlled frequency-synthesis circuit in which a phase-frequency detector compares a reference signal with a divided feedback signal. A charge pump and external loop filter then convert phase error into a tuning voltage for a voltage-controlled oscillator. The ADF4007BCP integrates the phase detector, precision charge pump, programmable divider, and prescaler used to construct such a loop. The ADF4007BCP supports RF operation to 7.5 GHz and phase-frequency-detector operation to 120 MHz. Its reference divider is permanently set to 2, permitting an external REFIN frequency up to 240 MHz. Divide ratios are selected through two external control pins, while RSET controls charge-pump current. A separate VP supply allows the tuning-voltage range to exceed what the main 3.3 V supply alone would permit. The device also includes hardware power-down control for system-state management. According to the Analog Devices ADF4007 data sheet, the loop-filter values derived with ADIsimPLL provide typical phase noise of -100 dBc/Hz at a 10 kHz carrier offset, while the loop filter attenuates spurs below -90 dBc. These figures make the synthesizer suitable for RF communication systems requiring predictable phase noise and spur performance. Typical uses include wireless transceiver frequency synthesis, microwave and RF test equipment, and communications infrastructure. In a PLL implementation, the ADF4007BCP compares the divided feedback output with REFIN and drives a VCO tuning input through an external charge-pump loop filter. Designers must select divider ratios, loop bandwidth, and passive values that satisfy the required phase-noise and spur limits. A key implementation consideration is the exposed thermal pad. The data sheet controls its connection to ground and provides thermal and electrical layout guidance. Input, reference, charge-pump, and loop-filter connections should follow the manufacturer’s recommended layout to avoid introducing additional phase noise or instability. This page consolidates the verified manufacturer information, available ordering data, same-package cross-references, comparison points, and practical design guidance for engineers evaluating the ADF4007BCP.
ADF4007BCPZ - 7.5 GHz PLL Synthesizer | Analog Devices
The Analog Devices ADF4007BCPZ is a high-frequency divider and phase-locked-loop synthesizer operating up to 7.5 GHz on the RF side and up to 120 MHz at the phase-frequency detector. It operates from a 2.7 V to 3.3 V supply, draws 15 mA, and is packaged in a 20-pin LFCSP with an exposed pad. A phase-locked loop, or PLL, is a frequency-control architecture that locks an output oscillator to a stable reference. It belongs to the clock and timing hierarchy, where a phase-frequency detector compares two signals, a charge pump produces an adjustment voltage, and a loop filter controls loop dynamics. The ADF4007 supplies the detector, charge pump, and programmable divider functions, while an external VCO and loop filter complete the synthesis loop. The ADF4007BCPZ supports an RF operating range of 20 MHz to 7.5 GHz, a maximum PFD frequency of 120 MHz, and a permanently fixed reference divide ratio of 2. Its reference input can operate up to 240 MHz. Two external control pins set the divider or prescaler value, allowing the integer-N division ratio to be configured for the target output frequency. Its low-noise digital PFD and precision charge pump support low phase-noise synthesis when paired with a correctly designed loop filter. The manufacturer datasheet shows approximately -100 dBc/Hz phase noise at a 10 kHz offset from the carrier in the example circuit. Loop-filter selection also attenuates spurs, with the illustrated circuit producing spurs below -90 dBc. Typical uses include wireless transceiver local oscillators, microwave synthesizers, frequency converters, test-and-measurement signal sources, and communication equipment requiring programmable division from a reference clock. The 3.3 V supply arrangement also fits systems where the RF section and charge-pump headroom are managed as separate functions. When implementing the device, use the manufacturer pin-description table to assign all 20 LFCSP connections and preserve the exposed-pad grounding requirement. Component values for the loop filter and RSET network should be calculated from the intended reference frequency, division ratio, VCO gain, target phase noise, and lock-time requirements. This page combines the ADF4007BCPZ specifications, verified source links, application guidance, and drop-in alternatives with practical PLL design considerations. It also identifies the trade-offs among confirmed same-package replacements so engineers can evaluate PCB reuse without assuming unverified cross-brand equivalence.
ADF4007BCPZ-RL7 - 7.5 GHz Integer-N PLL Synthesizer | Analog Devices
The Analog Devices ADF4007BCPZ-RL7 is a high-frequency divider and integer-N phase-locked-loop synthesizer with RF operation up to 7.5 GHz, a maximum phase-frequency-detector frequency of 120 MHz, and a 20-lead WFQFN exposed-pad package. It accepts a CMOS reference input and provides selectable divide ratios of 8, 16, 32, and 64 through two external control pins. A frequency synthesizer is a timing component that uses a phase-locked loop to generate, divide, or regulate a frequency referenced to a stable source. The ADF4007 combines a low-noise digital phase-frequency detector, precision charge pump, and programmable divider or prescaler. Within the clock and timing IC hierarchy, it is an integer-N PLL synthesizer designed for communications equipment requiring accurate frequency translation or clock generation. The device supports a 3.3 V power supply and a separate charge-pump supply that permits an extended tuning-voltage range. External control pins select among four prescaler-related divide settings, while the reference input establishes the synthesizer's frequency accuracy and stability. These functions make the part suitable for RF signal chains where a fixed reference must control a high-frequency local oscillator. Technical performance depends on the reference signal, loop filter, charge-pump settings, and output frequency. The Analog Devices ADF4007 data sheet describes a typical circuit using the specified loop-filter components with ADIsimPLL, producing phase noise of -100 dBc/Hz at a 10 kHz carrier offset. The loop filter also attenuates spurs to below -90 dBc in that typical implementation. Typical applications include wireless transceiver local oscillators, microwave down-converter and up-converter reference planes, instrument clocks, and communications test equipment. An evaluation platform is available as EVAL-ADF4007, with SMA connections for the reference and RF paths and hardware selection of the 8, 16, 32, or 64 divide ratios for rapid PLL characterization. A successful design must preserve clean reference routing, provide suitable charge-pump and loop-filter networks, and keep the RF output path away from high-current switching nodes. The exposed pad should be connected to the ground plane according to the manufacturer's land-pattern and thermal-layout guidance because it provides both electrical return and heat-dissipation paths. This product page combines the manufacturer's functional specifications, pricing structure, drop-in alternatives, and application-focused engineering guidance to support faster component selection and implementation of the ADF4007BCPZ-RL7 in communications clock and frequency-synthesis systems.
ADF4106BCP - 6 GHz Integer-N PLL Synthesizer | Analog Devices
The Analog Devices ADF4106BCP is a 6 GHz integer-N phase-locked loop frequency synthesizer in a compact 20-lead LFCSP package with an exposed pad. It operates from a 3.3 V supply, supports a separate charge-pump supply for extended tuning-voltage range, and includes programmable charge-pump currents, programmable anti-backlash pulse width, and a three-wire serial interface. A frequency synthesizer generates a stable, programmable output frequency from a lower-frequency reference. An integer-N PLL belongs to the phase-locked loop family, which includes phase detectors, charge pumps, counters, frequency dividers, and voltage-controlled oscillators. In the ADF4106, the reference divider, prescaler, programmable A and B counters, phase-frequency detector, and precision charge pump establish a locked output frequency for local-oscillator and transceiver applications. The headline operating bandwidth is 6.0 GHz, while the 3.3 V supply architecture allows integration in RF systems that already operate on 3.3 V. The dual-modulus prescaler is programmable, and the 6-bit A counter divides the prescaled RF input. The B counter determines the programmable division ratio, while the reference divider reduces the external reference frequency before comparison with the divided feedback signal. The separate VP charge-pump supply is important in designs that need a tuning voltage outside the range supported by the main supply alone. Programmable charge-pump currents provide a means of balancing phase-error performance against lock behavior, and the programmable anti-backlash pulse width helps control the timing of the phase-frequency detector's correction pulses. These features support deterministic integration of the PLL into RF signal chains. Typical uses include local oscillators in wireless receivers and transmitters, up-conversion and down-conversion sections of RF systems, frequency-hopping equipment, and other RF communication circuits requiring programmable frequency generation. The 3-wire serial interface allows the host processor or microcontroller to configure the counters, prescaler, charge-pump settings, and anti-backlash pulse width. When laying out this device, keep the reference, prescaler feedback, charge-pump, and loop-filter connections short and isolate noisy switching or digital return currents from sensitive RF nodes. Because the exposed pad requires a low-impedance thermal path, follow the manufacturer package guidance for via patterns and ground-pour connection. Component values for the loop filter, matching networks, and reference decoupling should be selected from the manufacturer's application guidance and the intended channel plan. This page combines manufacturer datasheet details, distributor availability information, package and lifecycle context, and an engineering-focused comparison of documented alternatives. It also records where verified data is incomplete so designers can distinguish confirmed parameters from values that still require confirmation against the latest Analog Devices documentation.
ADF4106BCP-REEL - 6 GHz Integer-N PLL Synthesizer | Analog Devices (Tape & Reel)
The Analog Devices ADF4106BCP-REEL is a 6 GHz integer-N phase-locked loop frequency synthesizer in a compact 20-lead LFCSP package with an exposed pad. It operates from a 3.3 V supply, supports a separate charge-pump supply for extended tuning-voltage range, and includes programmable charge-pump currents, programmable anti-backlash pulse width, and a three-wire serial interface. A frequency synthesizer generates a stable, programmable output frequency from a lower-frequency reference. An integer-N PLL belongs to the phase-locked loop family, which includes phase detectors, charge pumps, counters, frequency dividers, and voltage-controlled oscillators. In the ADF4106, the reference divider, prescaler, programmable A and B counters, phase-frequency detector, and precision charge pump establish a locked output frequency for local-oscillator and transceiver applications. The headline operating bandwidth is 6.0 GHz, while the 3.3 V supply architecture allows integration in RF systems that already operate on 3.3 V. The dual-modulus prescaler is programmable, and the 6-bit A counter divides the prescaled RF input. The B counter determines the programmable division ratio, while the reference divider reduces the external reference frequency before comparison with the divided feedback signal. The separate VP charge-pump supply is important in designs that need a tuning voltage outside the range supported by the main supply alone. Programmable charge-pump currents provide a means of balancing phase-error performance against lock behavior, and the programmable anti-backlash pulse width helps control the timing of the phase-frequency detector's correction pulses. These features support deterministic integration of the PLL into RF signal chains. Typical uses include local oscillators in wireless receivers and transmitters, up-conversion and down-conversion sections of RF systems, frequency-hopping equipment, and other RF communication circuits requiring programmable frequency generation. The 3-wire serial interface allows the host processor or microcontroller to configure the counters, prescaler, charge-pump settings, and anti-backlash pulse width. When laying out this device, keep the reference, prescaler feedback, charge-pump, and loop-filter connections short and isolate noisy switching or digital return currents from sensitive RF nodes. Because the exposed pad requires a low-impedance thermal path, follow the manufacturer package guidance for via patterns and ground-pour connection. Component values for the loop filter, matching networks, and reference decoupling should be selected from the manufacturer's application guidance and the intended channel plan. This page combines manufacturer datasheet details, distributor availability information, package and lifecycle context, and an engineering-focused comparison of documented alternatives. It also records where verified data is incomplete so designers can distinguish confirmed parameters from values that still require confirmation against the latest Analog Devices documentation.
ADF4106BCPZ - 6 GHz Integer-N PLL Synthesizer | Analog Devices
The Analog Devices ADF4106BCPZ is an integer-N RF frequency synthesizer with a 6 GHz operating bandwidth, 20-bit LFCSP-20 package, and a 2.7 V to 3.3 V supply range. The device includes a programmable dual-modulus prescaler, programmable A and B counters, a programmable reference divider, a precision charge pump, and a low-noise digital phase-frequency detector for generating local-oscillator signals in wireless receivers and transmitters. A phase-locked loop, or PLL, is a feedback-controlled frequency-generation circuit in which a phase-frequency detector compares a reference signal with a divided output signal. The charge pump converts the phase error into a control voltage that tunes the oscillator until the divided feedback matches the reference. An integer-N PLL synthesizes frequencies using an integer division ratio, making it well suited to fixed or integer-related RF channels requiring predictable lock behavior and uncomplicated loop-filter design. The ADF4106BCPZ supports a maximum RF input frequency of 6 GHz and a reference input frequency stated as high as 325 MHz in comparison information. Its programmable dual-modulus prescaler, 6-bit A counter, 13-bit B counter, and programmable reference divider provide flexible channel-generation ratios. The separate charge-pump supply, VP, allows the tuning voltage range to be extended for applications requiring greater tuning authority. As an integer-N architecture, the ADF4106BCPZ avoids the fractional-N divider sequence associated with fractional-N synthesizers. This simplifies control-word programming and loop-filter implementation, although fractional-N devices may be preferable when very fine channel spacing is required. The low-noise phase-frequency detector and precision charge pump are the central timing elements controlling phase error and reference-to-output jitter. Typical uses include wireless receiver and transmitter local oscillators, up-conversion and down-conversion sections, test and measurement equipment, and RF communication modules. Designers should select the prescaler, A counter, B counter, reference divider, and charge-pump settings so the resulting feedback ratio is valid and lock can be achieved with the chosen external loop filter. Keep the power and ground layout compact and connect the exposed pad to a low-impedance ground plane with adequate thermal relief. Place the reference and RF input connections away from the charge-pump and loop-filter components to reduce coupling. Review the manufacturer datasheet for the complete register map, pin description, recommended decoupling, and timing limits before production release. This product page organizes the confirmed electrical and package information, practical application guidance, verified comparison details, and design considerations needed to evaluate the ADF4106BCPZ for an integer-N RF synthesis design.
ADF4106BRU - 6 GHz Integer-N PLL | Analog Devices | RF
The Analog Devices ADF4106BRU is a 6 GHz integer-N phase-locked-loop frequency synthesizer with one RF channel, a programmable dual-modulus prescaler, programmable counters, a precision charge pump, and a 3-wire serial interface. It is supplied in a 16-pin TSSOP package measuring 0.173 inch, or 4.40 mm, in width and operates from a 3.3 V power supply, with a separate charge-pump supply. An integer-N PLL is a clock-and-timing feedback circuit used to generate an RF output locked to a stable reference frequency. Its phase-frequency detector compares the divided feedback signal with the reference, while the charge pump, loop filter, voltage-controlled oscillator, prescaler, and programmable counters close the feedback loop. Within the broader hierarchy, the ADF4106 belongs to frequency synthesizers, clock generators, phase-locked loops, and clock-and-timing integrated circuits used in wireless RF signal chains. The ADF4106 provides a 6.0 GHz bandwidth and is intended for local-oscillator generation in wireless receiver and transmitter up-conversion and down-conversion sections. Its architecture includes a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, programmable A and B counters, and a programmable dual-modulus prescaler. Additional programming controls include selectable charge-pump currents and an adjustable anti-backlash pulse width. The separate VP charge-pump supply allows an extended tuning-voltage range when supported by the surrounding voltage-controlled oscillator and loop-filter design. A 3-wire serial interface configures the frequency plan and operating parameters. This architecture is appropriate when integer division relationships are acceptable and predictable channel spacing, programmable counters, and flexible prescaler selection are more important than fractional-N synthesis. Typical uses include wireless receiver local oscillators, transmitter up-converters and down-converters, RF measurement equipment, instrumentation, and other RF communications systems targeting frequencies below 6 GHz. The verified distributor listing identifies the ADF4106BRU as a clock/frequency synthesizer IC with one channel and a 16-TSSOP package. Layout quality directly affects PLL behavior. Keep the reference and RF paths compact and impedance-controlled, place loop-filter components close to the charge-pump and VCO interface, and provide adequate ground-plane continuity. Confirm lock range, reference-divider limits, prescaler values, counter limits, and VCO tuning voltage against the manufacturer datasheet before production release. This product page combines the verified 6 GHz and package information, official Analog Devices documentation, distributor sourcing data, and practical RF design guidance. It also distinguishes true pin-compatible replacements from parts that are only functionally similar, helping engineers avoid invalid drop-in substitutions.
ADF4106BRU-REEL - 6 GHz Integer-N PLL | Analog Devices | RF (Tape & Reel)
The Analog Devices ADF4106BRU-REEL is a 6 GHz integer-N phase-locked-loop frequency synthesizer with one RF channel, a programmable dual-modulus prescaler, programmable counters, a precision charge pump, and a 3-wire serial interface. It is supplied in a 16-pin TSSOP package measuring 0.173 inch, or 4.40 mm, in width and operates from a 3.3 V power supply, with a separate charge-pump supply. An integer-N PLL is a clock-and-timing feedback circuit used to generate an RF output locked to a stable reference frequency. Its phase-frequency detector compares the divided feedback signal with the reference, while the charge pump, loop filter, voltage-controlled oscillator, prescaler, and programmable counters close the feedback loop. Within the broader hierarchy, the ADF4106 belongs to frequency synthesizers, clock generators, phase-locked loops, and clock-and-timing integrated circuits used in wireless RF signal chains. The ADF4106 provides a 6.0 GHz bandwidth and is intended for local-oscillator generation in wireless receiver and transmitter up-conversion and down-conversion sections. Its architecture includes a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, programmable A and B counters, and a programmable dual-modulus prescaler. Additional programming controls include selectable charge-pump currents and an adjustable anti-backlash pulse width. The separate VP charge-pump supply allows an extended tuning-voltage range when supported by the surrounding voltage-controlled oscillator and loop-filter design. A 3-wire serial interface configures the frequency plan and operating parameters. This architecture is appropriate when integer division relationships are acceptable and predictable channel spacing, programmable counters, and flexible prescaler selection are more important than fractional-N synthesis. Typical uses include wireless receiver local oscillators, transmitter up-converters and down-converters, RF measurement equipment, instrumentation, and other RF communications systems targeting frequencies below 6 GHz. The verified distributor listing identifies the ADF4106BRU-REEL as a clock/frequency synthesizer IC with one channel and a 16-TSSOP package. Layout quality directly affects PLL behavior. Keep the reference and RF paths compact and impedance-controlled, place loop-filter components close to the charge-pump and VCO interface, and provide adequate ground-plane continuity. Confirm lock range, reference-divider limits, prescaler values, counter limits, and VCO tuning voltage against the manufacturer datasheet before production release. This product page combines the verified 6 GHz and package information, official Analog Devices documentation, distributor sourcing data, and practical RF design guidance. It also distinguishes true pin-compatible replacements from parts that are only functionally similar, helping engineers avoid invalid drop-in substitutions.
ADF4106BRUZ - 6GHz Integer-N PLL Synthesizer | Analog Devices
Analog Devices ADF4106BRUZ is a 6 GHz RF clock and frequency synthesizer IC in a 16-pin TSSOP package operating from a 2.7 V to 3.3 V supply. It uses an integer-N PLL architecture with a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, programmable A and B counters, and a dual-modulus P/P+1 prescaler. These blocks support programmable local-oscillator generation in wireless receiver and transmitter signal chains. A PLL frequency synthesizer is a clock-and-timing IC that locks an output frequency to a stable reference frequency. The feedback divider compares the divided output with the reference, while the phase-frequency detector and charge pump convert phase and frequency error into a correction voltage for the internal voltage-controlled oscillator. In the system hierarchy, the ADF4106BRUZ is an RF frequency synthesizer, a phase-locked loop, a clock-and-timing IC, and ultimately an integrated circuit used for local-oscillator generation. The ADF4106's programmable counters and dual-modulus prescaler allow the output frequency to be derived from the reference through integer-N frequency multiplication. Its 6 GHz operating class makes it applicable to RF up-conversion and down-conversion circuits, where a receiver or transmitter requires a stable local oscillator. The supplied distributor data identifies the device as a 6 GHz, single-channel clock/frequency synthesizer in a 16-TSSOP package with a 4.40 mm body width. The architecture separates the reference path from the programmable RF synthesis path. The reference divider reduces the input reference frequency, the A and B counters define the integer-N division ratio, and the dual-modulus prescaler supports fine frequency-plan division. According to the Analog Devices ADF4106 datasheet, the device includes a low-noise digital phase-frequency detector and a precision charge pump, which are central to phase-error conversion and loop stability. Typical uses include wireless receiver and transmitter local oscillators, up-conversion and down-conversion blocks, instrumentation RF signal sources, and communication equipment requiring programmable RF clocks. The device can also serve RF test and measurement systems when the required output frequency and phase-noise behavior satisfy the system specification. Because PLL performance depends on the complete loop filter, reference source, VCO implementation, and output frequency, system-level simulation remains necessary. Designers should provide the manufacturer-specified reference and charge-pump circuitry, route sensitive RF and control signals carefully, and verify acquisition, lock, spur, and phase-noise behavior across temperature and supply ranges. The operating supply range of 2.7 V to 3.3 V and typical supply current of 10.5 mA are suitable for 3.3 V RF system rails. The ADF4106BRUZ is specifically supplied in the compact 16-pin TSSOP package, so PCB layout and assembly designs must follow that footprint rather than the 20-lead LFCSP variant. This product page combines the verified 6 GHz frequency capability, 2.7 V to 3.3 V supply range, 10.5 mA supply current, package information, distributor pricing, and same-footprint replacement research with practical selection guidance. It also separates documented facts from parameters requiring confirmation in the complete Analog Devices datasheet, helping engineers make a defensible PCB and frequency-plan decision.
ADF4106SRU-EP - 6 GHz PLL Frequency Synthesizer | Analog Devices
The Analog Devices ADF4106SRU-EP is a frequency synthesizer integrated circuit with a 6 GHz maximum operating frequency, designed for phase-locked-loop signal generation in wireless transmitters, wireless receivers, RF conversion stages, and instrumentation. The device is supplied in a 16-lead TSSOP package measuring approximately 4.40 mm in width. Its architecture supports programmable frequency synthesis, phase detection, reference division, counter programming, and RF signal generation within one compact surface-mount package. A PLL frequency synthesizer is a clock-and-timing IC that combines a phase-frequency detector, precision charge pump, programmable counters, reference divider, and voltage-controlled oscillator or prescaler. This PLL structure belongs to the frequency synthesizer hierarchy, where it extends beyond a fixed clock generator by allowing output frequency to be programmed through digital counter and divider settings. It is commonly used when a system requires accurate, adjustable, or fractional-N local oscillator signals. The ADF4106SRU-EP supports operation up to 6 GHz and includes programmable A and B counters, a programmable reference divider, a low-noise digital phase-frequency detector, and a precision charge pump. The 16-lead TSSOP package provides a compact PCB footprint for RF and communications equipment. The listed input and output data include a 20 MHz input and 325 MHz output, making the part relevant to applications requiring locally generated RF signals above the direct reference frequency. The frequency synthesizer architecture is suited to integer-N and fractional-N implementations. Programmable counters establish the required multiplication ratio, while the phase-frequency detector and charge pump drive the loop filter and oscillator. Designers should select reference, divider, loop-filter, and output-routing values that maintain lock margin while controlling phase noise, spur performance, tuning range, and reference-referred phase noise. Typical applications include wireless receiver and transmitter local oscillators, RF up-conversion and down-conversion sections, industrial RF test equipment, communication infrastructure, and other systems needing a programmable oscillator. The 6 GHz operating ceiling allows the device to address microwave and wireless bands when paired with suitable external loop-filter and RF components. The principal design consideration is loop-filter implementation because the filter directly influences lock range, phase noise, reference spurs, and recovery time. Component tolerances, reference-clock accuracy, charge-pump current settings, counter values, and PCB cleanliness should be evaluated together rather than optimized independently. This product record combines the confirmed 6 GHz frequency capability, 16-lead TSSOP construction, lifecycle information, direct replacement guidance, comparison parameters, and practical RF design considerations to support component selection and board-level implementation.
ADF4106SRU-EP-R7 - 6 GHz PLL Synthesizer | Analog Devices
Analog Devices ADF4106SRU-EP-R7 is a 6 GHz integer-N frequency synthesizer with a programmable reference divider, 6-bit A counter, B counter, dual-modulus prescaler, low-noise phase-frequency detector, and precision charge pump. The device accepts a reference input up to 325 MHz and is packaged in a 16-lead TSSOP with 4.40 mm body width for surface-mount assembly. Its -EP grade supports operation from -55°C to 125°C. A frequency synthesizer is a clock-and-timing IC that generates a stable, programmable output frequency from a reference oscillator. In the broader hierarchy, the ADF4106 belongs to the PLL family, where a phase-locked loop compares a divided output with a reference signal and drives a charge pump and tuning voltage until the two frequencies align. This architecture makes the device useful for local oscillators in wireless transmitters and receivers. The principal benefits of the ADF4106-EP are its 6 GHz operating ceiling, 325 MHz maximum input frequency, low-noise phase detector, and precision charge pump. Programmable A and B counters and a dual-modulus prescaler support rational frequency ratios, while the programmable reference divider allows the reference path to be divided before comparison. These features allow a fixed or shared reference source to drive multiple programmable RF output frequencies. Internally, the synthesizer combines digital frequency detection, a precision charge pump, prescaler, counters, and control registers. The phase-frequency detector compares the divided prescaler output against the divided reference. The resulting charge-pump current adjusts the loop-filter voltage and controls a voltage-controlled oscillator in a closed loop. Designers must select divider ratios and loop-filter components for the desired channel spacing, reference phase noise, lock time, and spur performance. Typical applications include wireless receiver and transmitter local oscillators, RF up-converters and down-converters, instrumentation, and frequency-generation modules. It is particularly appropriate when the required output approaches the 6 GHz range and the board can accommodate a 16-lead TSSOP footprint with careful high-frequency layout. Place the charge-pump and loop-filter components close to the device, keep RF and digital return paths compact, and provide continuous ground-plane coverage beneath the TSSOP. The loop filter and reference routing should be evaluated with the intended VCO because phase noise and lock behavior depend on the complete synthesizer, filter, VCO, and reference system rather than on the ADF4106 alone. This product page combines the ADF4106-EP manufacturer documentation, exact package and frequency information, sourcing details, engineering-oriented application guidance, and a comparison framework for evaluating same-family frequency synthesizers.
ADF4106SRUZ-EP 6 GHz PLL Synthesizer | Analog Devices
The Analog Devices ADF4106SRUZ-EP is a 6 GHz integer-N frequency synthesizer with an integrated programmable reference divider, dual-modulus prescaler, phase-frequency detector, precision charge pump, and 6-bit A counter and 21-bit B counter. It is packaged in a 16-lead TSSOP measuring 4.40 mm wide and supports the extended military temperature range of -55°C to +125°C. The EP suffix identifies the defense and aerospace-oriented product supporting the AQEC standard. A phase-locked loop, or PLL, is a feedback-controlled timing system that locks an oscillator to a stable reference frequency. Within the broader RF and wireless hierarchy, the ADF4106 is a clock-generation and timing IC used to develop programmable local oscillators for receiver and transmitter conversion stages. Its integer-N architecture is especially useful when predictable frequency steps, repeatable programming, and compact implementation are more important than fractional-N flexibility. The device combines a programmable reference divider with a programmable prescaler, A counter, and B counter, allowing the output frequency to be set through a serial interface. According to the manufacturer datasheet, the architecture supports synthesis up to 6 GHz and includes a low-noise digital phase-frequency detector and precision charge pump. These characteristics make the part appropriate for RF tuning planes, microwave conversion chains, instrumentation, and controlled aerospace or defense equipment. The ADF4106SRUZ-EP is differentiated from the standard ADF4106 product by its -55°C to +125°C operating range, controlled manufacturing baseline, single assembly and test site, single fabrication site, enhanced product-change notification, and AQEC-oriented qualification support. The suffix denotes an enhanced-product configuration rather than a different PLL architecture. The manufacturer product page also identifies availability of qualification data on request. Typical uses include local-oscillator generation in wireless receivers, local-oscillator generation in wireless transmitters, microwave up-conversion and down-conversion, frequency-agile test equipment, and defense or aerospace RF subsystems. The 16-lead TSSOP keeps the implementation compact while exposing the programming and analog control interfaces needed for a closed-loop synthesizer. When laying out the circuit, preserve continuous reference and feedback paths, place the loop-filter components close to their associated pins, and provide stable supply bypassing. The reference input and prescaler feedback are especially sensitive to layout discontinuities. Component values for the loop filter and charge-pump current should be calculated from the intended reference frequency, division ratio, phase-noise target, and settling-time requirement rather than copied without regard to those operating conditions. This product summary combines the ADF4106-EP functional description, package and temperature information, lifecycle context, and practical guidance for evaluating the ADF4106SRUZ-EP in an RF timing design. It also highlights the key engineering distinction between ordinary ADF4106 variants and the EP product intended for controlled defense and aerospace manufacturing environments.
ADF4107BCP - 7 GHz Integer-N PLL | Analog Devices | LFCSP-20
The Analog Devices ADF4107BCP is a production 7 GHz integer-N phase-locked-loop frequency synthesizer housed in a 20-lead LFCSP surface-mount package. Its headline characteristics are a 7.0 GHz maximum operating frequency, a 3.3 V power supply, and a programmable dual-modulus prescaler. The device supports 3 V system operation and uses a separate charge-pump supply, VP, so designers can extend the tuning voltage independently from the main supply. An integer-N PLL is a frequency-generation category in which feedback divides the synthesized output to produce a stable reference-frequency relationship. Within the broader hierarchy of clock and timing integrated circuits, a PLL combines a phase-frequency detector, charge pump, programmable counters, prescaler, and voltage-controlled oscillator. The ADF4107 implements these functions as an integrated synthesizer for wireless transmitters and receivers requiring accurate local-oscillator generation. Key features include low-noise digital phase detection, a precision charge pump, a programmable reference divider, a 6-bit A counter, a 13-bit B counter, and a programmable dual-modulus P/P+1 prescaler. According to the Analog Devices ADF4107 data sheet, typical phase noise is -83 dBc/Hz at a 1 kHz carrier offset, while spurs are better than -70 dBc. These characteristics make the device useful where local-oscillator phase noise and close-in spur performance influence receiver sensitivity or transmitter signal quality. The architecture supports integer-N synthesis from a reference source through programmable division and prescaling. The charge-pump output on pin 2 drives an external loop filter, and the data sheet illustrates a filter designed for a 45-degree overall phase margin. Designers must account for loop bandwidth, reference phase noise, charge-pump current, prescaler division, and VCO tuning gain when determining filter component values. Typical applications include wireless receiver and transmitter local oscillators, up-conversion and down-conversion sections, instrumentation, and communications equipment. The 7 GHz operating ceiling suits radio-frequency signal chains operating below that limit, while the separate VP rail provides additional tuning-voltage headroom when required by the VCO and loop-filter design. A key design consideration is the dependence of reference phase noise on multiplication ratio. Although the ADF4107 supplies substantial on-chip frequency generation, the reference oscillator and loop filter remain external and can dominate final phase-noise performance. This page synthesizes verified manufacturer information, procurement data, replacement information, and practical design guidance for engineers evaluating the ADF4107BCP.
ADF4107BCP-REEL - 7 GHz Integer-N PLL | Analog Devices | LFCSP-20 (Tape & Reel)
The Analog Devices ADF4107BCP-REEL is a production 7 GHz integer-N phase-locked-loop frequency synthesizer housed in a 20-lead LFCSP surface-mount package. Its headline characteristics are a 7.0 GHz maximum operating frequency, a 3.3 V power supply, and a programmable dual-modulus prescaler. The device supports 3 V system operation and uses a separate charge-pump supply, VP, so designers can extend the tuning voltage independently from the main supply. An integer-N PLL is a frequency-generation category in which feedback divides the synthesized output to produce a stable reference-frequency relationship. Within the broader hierarchy of clock and timing integrated circuits, a PLL combines a phase-frequency detector, charge pump, programmable counters, prescaler, and voltage-controlled oscillator. The ADF4107 implements these functions as an integrated synthesizer for wireless transmitters and receivers requiring accurate local-oscillator generation. Key features include low-noise digital phase detection, a precision charge pump, a programmable reference divider, a 6-bit A counter, a 13-bit B counter, and a programmable dual-modulus P/P+1 prescaler. According to the Analog Devices ADF4107 data sheet, typical phase noise is -83 dBc/Hz at a 1 kHz carrier offset, while spurs are better than -70 dBc. These characteristics make the device useful where local-oscillator phase noise and close-in spur performance influence receiver sensitivity or transmitter signal quality. The architecture supports integer-N synthesis from a reference source through programmable division and prescaling. The charge-pump output on pin 2 drives an external loop filter, and the data sheet illustrates a filter designed for a 45-degree overall phase margin. Designers must account for loop bandwidth, reference phase noise, charge-pump current, prescaler division, and VCO tuning gain when determining filter component values. Typical applications include wireless receiver and transmitter local oscillators, up-conversion and down-conversion sections, instrumentation, and communications equipment. The 7 GHz operating ceiling suits radio-frequency signal chains operating below that limit, while the separate VP rail provides additional tuning-voltage headroom when required by the VCO and loop-filter design. A key design consideration is the dependence of reference phase noise on multiplication ratio. Although the ADF4107 supplies substantial on-chip frequency generation, the reference oscillator and loop filter remain external and can dominate final phase-noise performance. This page synthesizes verified manufacturer information, procurement data, replacement information, and practical design guidance for engineers evaluating the ADF4107BCP-REEL.
ADF4107BCPZ - 7 GHz Integer-N PLL | Analog Devices
The Analog Devices ADF4107BCPZ is a 7 GHz integer-N frequency synthesizer with a programmable phase-frequency detector, precision charge pump, reference divider, A and B counters, and dual-modulus prescaler, housed in a 20-lead WFQFN exposed-pad package. It generates local-oscillator signals for wireless receiver and transmitter upconversion and downconversion stages. The device uses one reference input to synthesize programmable output frequencies for RF signal chains. A frequency synthesizer, or PLL, belongs to the clock-generation and timing hierarchy. Its phase-locked loop compares a divided feedback signal with a reference oscillator and drives a programmable frequency divider through a phase-frequency detector and charge pump. In an RF transceiver, this architecture supports local-oscillator generation where a stable reference frequency must be converted into a programmable carrier or intermediate-frequency signal. The ADF4107 integrates a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, programmable A and B counters, and a dual-modulus prescaler identified as P/P + 1. The A counter is 6 bits and the B counter is 13 bits. This programmable divider structure permits the reference path and feedback division ratio to be configured according to the desired channel plan and synthesizer architecture. The charge-pump output at pin 2 drives an external loop filter. According to the Analog Devices ADF4107 datasheet, the example loop-filter calculation targets 45 degrees of overall phase margin. The datasheet also gives a typical phase-noise result of -83 dBc/Hz at a 1 kHz carrier offset, with spurs better than -70 dBc. These figures make loop design and printed-circuit layout important to final phase noise and spurious performance. Typical uses include wireless receiver local oscillators, wireless transmitter upconversion paths, RF downconversion systems, instrumentation requiring programmable RF frequencies, and intermediate-frequency generation. The 7 GHz maximum frequency supports RF operating bands below that limit, while the integer-N architecture simplifies frequency planning through programmable A and B counter ratios. The external loop filter, reference components, supply bypassing, and ground return directly influence phase noise, lock behavior, and spur performance. Keep the charge-pump connection short, use a symmetrical loop-filter layout around the device, and decouple supply pins with the capacitance specified in the manufacturer datasheet. Confirm lock range and reference-divider settings for every required output frequency. This page combines the manufacturer’s PLL architecture and measured performance details with package, sourcing, application, and replacement guidance. It also identifies the limits of a true drop-in replacement: the closest ADF4106, ADF4108, and ADF4109 devices share the family platform but change the maximum synthesized frequency, so the original ADF4107BCPZ remains preferable when the exact 7 GHz operating limit is required.
ADF4107BRU - 7 GHz Integer-N PLL Frequency Synthesizer
The Analog Devices ADF4107BRU is a 7 GHz integer-N PLL frequency synthesizer with programmable A and B counters, a programmable reference divider, and a dual-modulus prescaler in a 16-lead TSSOP package. It is designed for local-oscillator generation in wireless transmitters and receivers, including upconversion and downconversion sections. A PLL frequency synthesizer generates a stable, programmable output frequency from a reference source. This device combines a low-noise digital phase-frequency detector, precision charge pump, programmable counters, and dual-modulus prescaler to support frequency multiplication and division. The ADF4107 family is positioned in the clock-and-timing semiconductor hierarchy, where it provides programmable RF frequency generation for communication systems. Key features include operation up to 7 GHz, 6-bit A-counter and 13-bit B-counter programmability, and a programmable dual-modulus prescaler. The reference divider allows the reference frequency to be divided before comparison with the synthesized feedback signal. The datasheet identifies typical phase noise of -83 dBc/Hz at 1 kHz offset and spurs better than -70 dBc in the cited typical application condition. The architecture is intended for RF signal chains where a stable reference clock and programmable feedback divider are required. The prescaler divides the output frequency, while the A and B counters determine the required multiplication ratio and modulus. Correct loop-filter design is essential because phase noise, reference spurs, lock behavior, and output jitter depend on the selected reference frequency, bandwidth, and loop parameters. Typical applications include wireless receiver and transmitter local oscillators, upconversion and downconversion chains, RF communications equipment, and test systems requiring programmable RF signal generation. The ADF4107 is also useful where a low-cost integer-N architecture is preferable to a fractional-N synthesizer and the required channel spacing and phase-noise performance can be met. For implementation, follow the datasheet’s recommended reference, charge-pump, filter, and decoupling connections. Keep the reference and RF paths short, use controlled impedance routing where appropriate, and account for the device’s supply voltage and grounding requirements. This page combines verified manufacturer and distributor information with practical PLL design guidance; unavailable parameters are explicitly marked rather than estimated.
ADF4107BRU-REEL - 7 GHz Integer-N PLL Frequency Synthesizer (Tape & Reel)
The Analog Devices ADF4107BRU-REEL is a 7 GHz integer-N PLL frequency synthesizer with programmable A and B counters, a programmable reference divider, and a dual-modulus prescaler in a 16-lead TSSOP package. It is designed for local-oscillator generation in wireless transmitters and receivers, including upconversion and downconversion sections. A PLL frequency synthesizer generates a stable, programmable output frequency from a reference source. This device combines a low-noise digital phase-frequency detector, precision charge pump, programmable counters, and dual-modulus prescaler to support frequency multiplication and division. The ADF4107 family is positioned in the clock-and-timing semiconductor hierarchy, where it provides programmable RF frequency generation for communication systems. Key features include operation up to 7 GHz, 6-bit A-counter and 13-bit B-counter programmability, and a programmable dual-modulus prescaler. The reference divider allows the reference frequency to be divided before comparison with the synthesized feedback signal. The datasheet identifies typical phase noise of -83 dBc/Hz at 1 kHz offset and spurs better than -70 dBc in the cited typical application condition. The architecture is intended for RF signal chains where a stable reference clock and programmable feedback divider are required. The prescaler divides the output frequency, while the A and B counters determine the required multiplication ratio and modulus. Correct loop-filter design is essential because phase noise, reference spurs, lock behavior, and output jitter depend on the selected reference frequency, bandwidth, and loop parameters. Typical applications include wireless receiver and transmitter local oscillators, upconversion and downconversion chains, RF communications equipment, and test systems requiring programmable RF signal generation. The ADF4107 is also useful where a low-cost integer-N architecture is preferable to a fractional-N synthesizer and the required channel spacing and phase-noise performance can be met. For implementation, follow the datasheet’s recommended reference, charge-pump, filter, and decoupling connections. Keep the reference and RF paths short, use controlled impedance routing where appropriate, and account for the device’s supply voltage and grounding requirements. This page combines verified manufacturer and distributor information with practical PLL design guidance; unavailable parameters are explicitly marked rather than estimated.
ADF4107BRUZ - 7 GHz Integer-N PLL | Analog Devices | RF
The Analog Devices ADF4107BRUZ is a 7 GHz integer-N phase-locked-loop frequency synthesizer in a 16-pin TSSOP package. It operates from a 2.7 V to 3.3 V supply, draws 15 mA, and supports a separate 3.3 V charge-pump supply for extended tuning-voltage headroom. The device is intended for local-oscillator generation in wireless receiver and transmitter up-conversion and down-conversion paths. An integer-N PLL is a frequency synthesizer that derives an output frequency from a stable reference using digital counters, a phase-frequency detector, a charge pump, and a feedback loop filter. In the ADF4107 architecture, a programmable dual-modulus prescaler, programmable A and B counters, a programmable reference divider, a low-noise digital phase-frequency detector, and a precision charge pump support programmable frequency generation. The 6-bit A counter and 13-bit B counter provide the programmable division and modulus functions required for integer-N channel planning. Key characteristics include a 7.0 GHz operating bandwidth, operation with 3.3 V systems, programmable dual-modulus prescaling, programmable charge-pump current, and a separate VP charge-pump supply. A typical 1 MHz channel-spacing arrangement uses a 10 MHz reference divided by 10 by the on-chip reference divider. The manufacturer datasheet also reports typical phase noise of -83 dBc/Hz at a 1 kHz carrier offset and spurs better than -70 dBc. The digital control interface permits programming of operating parameters, while the phase-frequency detector compares the divided reference with the feedback signal. The charge-pump output drives an external passive loop filter, and the filter, along with the selected counter values, charge-pump current, reference frequency, and prescaler modulus, determines loop bandwidth, phase noise, lock behavior, and spur performance. Typical applications include wireless receiver local oscillators, wireless transmitter up-converters and down-converters, microwave and RF communications equipment, frequency-agile test instruments, and instrumentation requiring programmable RF synthesis. The 16-TSSOP format supports compact board construction, while the 7 GHz bandwidth covers common microwave and RF local-oscillator frequencies. A critical design consideration is the separation of the main supply and charge-pump supply so the tuning voltage can operate beyond the normal 3.3 V rail range. Loop-filter component selection must follow the manufacturer datasheet methodology because phase noise, spurs, lock time, and reference-divider rejection are interdependent. Keep the charge-pump and feedback routing compact, provide stable reference decoupling, and use a clean low-noise reference source. This product page combines the manufacturer specifications, package details, practical RF design guidance, application fit, and verified drop-in alternatives. It also identifies where a different PLL family should be selected when frequency range, prescaler architecture, reference-divider depth, or loop-filter requirements differ.
ADF4108BCPZ - 8 GHz Integer-N PLL Synthesizer | Analog Devices
The Analog Devices ADF4108BCPZ is an 8 GHz integer-N PLL frequency synthesizer with one RF channel, housed in a 20-lead WFQFN surface-mount package with an exposed pad. It integrates a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, 6-bit A counter, 13-bit B counter, and a dual-modulus P/P+1 prescaler. A phase-locked loop, or PLL, is a feedback-controlled timing system that locks an output oscillator to a stable reference frequency. In the broader semiconductor hierarchy, the ADF4108 is a clock-and-timing IC, a frequency synthesizer, and ultimately a programmable RF signal-generation component. Its integer-N architecture allows a reference frequency to be multiplied through programmable counters and a dual-modulus prescaler to create a local oscillator for RF transmitters and receivers. Key features include an 8 GHz maximum RF input frequency, programmable A and B counters, a programmable reference divider, and a dual-modulus prescaler. The 20-lead WFQFN package with an exposed pad supports compact surface-mount layouts while providing a thermal path for the charge-pump and PLL circuitry. The digital programming interface allows the divider values, prescaler mode, counter settings, and operating mode to be configured by an embedded controller. The internal architecture separates the phase-frequency detector from the charge pump so the loop can compare the divided output signal with the divided reference. In operation, the charge pump drives the loop-filter error current, while the VCO and feedback divider complete the closed loop. Designers must select the reference, N-divider, loop bandwidth, charge-pump current, and filter components together to achieve adequate phase noise, lock time, and spur performance. Typical applications include wireless receiver and transmitter local oscillators, up-conversion and down-conversion stages, instrumentation, and test-and-measurement equipment. The device is particularly relevant where a programmable integer division ratio is required for RF channel selection or coherent signal generation. A key design consideration is the need for a clean reference source and a correctly sized loop filter. Keep the reference and feedback paths short, provide stable decoupling, and use the manufacturer’s recommended PCB stack-up and exposed-pad soldering pattern to preserve RF behavior and thermal performance. This page combines manufacturer-level operating details with application guidance, pin-package guidance, and practical PLL design notes to support faster component selection and PCB implementation.
ADF4108BCPZ-RL7 - 8 GHz PLL Synthesizer | Analog Devices
The Analog Devices ADF4108BCPZ-RL7 is an 8 GHz clock and frequency synthesizer IC with one PLL channel, implemented in a 20-lead WFQFN exposed-pad package. It combines a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, programmable A and B counters, and a dual-modulus prescaler for local-oscillator generation in wireless receivers and transmitters. The device supports reference frequencies up to 300 MHz according to its technical documentation and is programmed through a serial interface. A phase-locked loop synthesizer is a clock-generation and timing-control device that locks an output frequency to a stable reference. The ADF4108 belongs to the PLL family, within the broader categories of clock and timing IC, frequency synthesizer, and RF signal-chain component. Its architecture supports integer-N frequency synthesis, where programmable counters and a dual-modulus prescaler determine the synthesized output relationship to the reference signal. This makes the device useful for coherent local oscillators in RF up-conversion and down-conversion stages. The principal specifications include an 8 GHz maximum output frequency, a 6-bit A counter, a 13-bit B counter, and programmable reference division. The A and B counters work with the P/P+1 dual-modulus prescaler to establish the required multiplication ratio and comparison frequency. A low-noise digital phase-frequency detector and precision charge pump support closed-loop phase control, while the programmable reference divider allows the external reference to be divided before comparison with the feedback divide path. The ADF4108 architecture separates frequency programming from the external loop-filter and voltage-controlled oscillator implementation. During operation, the phase-frequency detector compares the divided feedback signal with the divided reference signal. Its error information drives the charge pump and loop filter, which then adjust the VCO until phase and frequency lock are achieved. The serial programming interface configures the counters, prescaler, reference divider, and operating modes for the desired channel configuration. Typical uses include wireless receiver and transmitter local oscillators, RF up-converter and down-converter drive, industrial RF equipment, instrumentation, and communications modules. The synthesizer can also support test-and-measurement equipment requiring programmable RF output with stable phase relationships. The EVAL-ADF4108 evaluation platform provides a practical way to evaluate the synthesizer with an active loop filter and VCO when designing a new PLL board. Designers should select the prescaler, A counter, B counter, reference divider, charge-pump settings, and loop filter together rather than treating them as isolated values. Component tolerances, VCO tuning gain, phase noise, reference noise, and loop bandwidth determine lock performance and close-in phase noise. Keep the charge-pump, loop-filter, RF feedback, and reference paths compact, and route the exposed thermal pad according to the package land-pattern guidance. This product page consolidates the ADF4108 family architecture, verified distributor and manufacturer references, replacement analysis, and application-focused engineering guidance. It is intended to help designers distinguish direct drop-in candidates from related PLL devices and to plan the surrounding VCO, filter, layout, and programming work before committing to a PCB implementation.
ADF4110BCP - 550 MHz Integer-N PLL | Analog Devices
The Analog Devices ADF4110BCP is a single, integer-N frequency synthesizer and RF PLL with a maximum operating frequency of 550 MHz, programmable dual-modulus prescaler, programmable charge-pump currents, and separate charge-pump supply capability. The device is packaged in a 20-lead LFCSP package. A phase-locked loop (PLL) is a frequency-control circuit in which a voltage-controlled oscillator is adjusted by a feedback loop until its output phase and frequency match a reference signal. The ADF4110 family is designed for local-oscillator generation in wireless receiver and transmitter upconversion and downconversion sections. Its integer-N architecture simplifies frequency planning while the programmable prescaler and charge-pump settings support tuning-range and loop-bandwidth optimization. Key features include a 6-bit A counter, 13-bit B counter, programmable dual-modulus P/P+1 prescaler, low-noise digital phase-frequency detector, precision charge pump, and programmable reference divider. The supplied manufacturer information also identifies 5.5 V power-supply operation, a separate VP charge-pump supply for extended tuning voltage, and compatibility with 3 V systems. These functions allow the synthesizer to support wireless transceiver, RF receiver, RF transmitter, and local-oscillator designs. Technically, the device uses a phase-frequency detector to compare a divided reference with a divided feedback signal. The resulting error drives the charge pump and tuning path, closing the feedback loop at the selected output frequency. Because it is an integer-N synthesizer, channel spacing follows the reference frequency divided by the programmable reference divider and prescaler-related integer settings. Reference phase noise, loop bandwidth, charge-pump current, and loop-filter component selection therefore materially affect phase noise and lock behavior. ADF4110BCP is appropriate for RF and microwave designs requiring an integer-N local oscillator. Designers should preserve the required reference-decoupling and charge-pump layout, select loop-filter components for the target phase-noise and lock-time requirements, and verify the maximum 550 MHz operating limit against the complete prescaler and feedback-divider configuration. This page combines manufacturer product information, verified pricing starting at $3.55 as of 2026-10-29, package and feature details, practical RF design guidance, and same-brand drop-in alternatives for design evaluation.
ADF4110BCPZ - 550 MHz RF PLL Synthesizer | Analog Devices
The Analog Devices ADF4110BCPZ is a single-channel RF phase-locked-loop frequency synthesizer with a maximum operating frequency of 550 MHz, housed in a 20-lead WFQFN exposed-pad package. Its CMOS/TTL-compatible interface supports digital programming, while its clock output is designed for precision frequency generation and local-oscillator implementation in wireless RF systems. An RF PLL frequency synthesizer is an integrated timing IC that combines a low-noise phase-frequency detector, a precision charge pump, a programmable reference divider, programmable A and B counters, and a dual-modulus prescaler in the P/P+1 architecture. Together, these blocks compare a divided reference signal with a divided feedback signal and generate a correction voltage that locks the output to the requested ratio. The ADF4110 family supports programmable reference division, programmable A and B counters, and dual-modulus prescaling. Its 6-bit A counter and 13-bit B counter provide the integer and fractional division structure used to derive an output frequency from a stable reference. The low-noise digital phase-frequency detector and precision charge pump are particularly relevant where phase noise and reference spur behavior influence receiver and transmitter performance. The ADF4110BCPZ operates as one synthesizer channel and is identified in product listings as a clock/frequency synthesizer IC with PLL architecture, CMOS/TTL input, and clock output. Its maximum frequency rating is 550 MHz. The 20-WFQFN exposed-pad construction supports compact RF designs while providing a thermal pad for heat transfer through the PCB when required by the operating conditions and board construction. Typical uses include local oscillators in wireless receiver and transmitter up-conversion and down-conversion paths. The device can also serve RF signal-generation systems, communication equipment, frequency-agile test equipment, and other applications requiring a programmable output derived from a reference clock. The exact achievable output, lock range, phase-noise profile, and reference requirements depend on the selected divider settings and the external loop-filter implementation. PCB design should preserve short, controlled paths between the charge-pump output and the loop filter, while keeping the RF output and reference connections compact. The exposed pad should be connected to the appropriate ground plane and thermal-via pattern recommended for the package. Component values for the loop filter, reference divider, and charge-pump settings must be selected for the intended channel plan rather than copied blindly between different output frequencies. This page combines the manufacturer product information, distributor package details, family architecture, drop-in candidate information, application guidance, and design notes to provide a practical engineering reference for evaluating the ADF4110BCPZ.