بەرهەمەکان (970+)

ADF4110BCPZ-RL7 - 550 MHz Integer-N PLL | Analog Devices
ADF4110BCPZ-RL7

ADF4110BCPZ-RL7 - 550 MHz Integer-N PLL | Analog Devices

The Analog Devices ADF4110BCPZ-RL7 is a single, integer-N phase-locked loop frequency synthesizer with a maximum RF input frequency of 550 MHz, programmable prescaler and charge pump, and a 20-lead WFQFN exposed-pad package. It is designed to generate stable local-oscillator signals in RF receivers, transmitters, instrumentation, and wireless communication systems. A phase-locked loop, or PLL, is a frequency-control circuit that compares a divided reference signal with a feedback signal and drives a phase error toward zero through feedback. The ADF4110 belongs to the broader hierarchy of frequency synthesizer, clock-generation IC, timing-control integrated circuit, and semiconductor categories. Its integer-N architecture simplifies frequency planning while supporting programmable division ratios for RF channel selection. The device includes a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, 6-bit A counter, 13-bit B counter, and dual-modulus prescaler. Together, these blocks support programmable frequency synthesis while providing the phase-detection and current-pump functions required by an external passive loop filter. The manufacturer describes the part as production status, and the data sheet is identified as Revision F. At the circuit level, the ADF4110 family combines a prescaler with programmable A and B counters to produce division ratios for wireless receiver and transmitter local oscillators. The charge-pump output drives an external loop filter, whose component values determine loop bandwidth, reference-spur behavior, phase noise, and settling performance. This architecture favors predictable integer-N implementation when a direct fractional-N synthesizer is not required. Typical uses include RF local oscillators in wireless receivers and transmitters, frequency-agile communications equipment, industrial RF test systems, and signal-generation instruments. The 550 MHz maximum RF input frequency makes the device particularly relevant to RF front ends operating below 600 MHz, including industrial, scientific, instrumentation, and selected communication bands. Layout and loop-filter design are critical. Place the charge-pump output and loop-filter components close to the device, provide a low-impedance ground and exposed-pad connection, decouple the supply near the pins, and route high-frequency feedback lines away from sensitive analog nodes. The external loop filter must be calculated against the intended reference frequency, prescaler, division ratio, and phase-noise requirement. This product page combines the manufacturer’s device specifications with application guidance, package information, practical design notes, and a parameter comparison of related ADF4110-family synthesizers. The comparison focuses on package fit and functional differences so engineers can determine whether a related member is appropriate before changing an RF board design.

RFQ پەیوەندی
ADF4110BRU - 550 MHz Integer-N PLL | Analog Devices
ADF4110BRU

ADF4110BRU - 550 MHz Integer-N PLL | Analog Devices

The Analog Devices ADF4110BRU is a single integer-N radio-frequency phase-locked loop frequency synthesizer with a maximum PLL frequency of 550 MHz, programmable dual-modulus prescaler, and a 16-pin TSSOP package. The verified distributor listing identifies the part as a clock/frequency synthesizer with a 5 MHz input, 550 MHz maximum frequency, and 165 MHz output parameter. An RF PLL is a frequency synthesizer that locks a voltage-controlled oscillator to a stable reference frequency. It belongs to the clock and timing hierarchy: RF frequency synthesizer, PLL frequency synthesizer, clock and timing IC, and semiconductor. The ADF4110 family is intended for wireless receiver and transmitter local oscillators, where a programmable divider, phase-frequency detector, charge pump, A counter, and B counter establish the required output frequency. The key verified features include a 5.5 V power supply, a separate charge-pump supply that allows an extended tuning-voltage range, programmable dual-modulus prescaler, programmable charge-pump currents, and support for 3 V systems. The 550 MHz upper PLL frequency is relevant to RF communications designs, while the 16-TSSOP package supports compact surface-mount implementation. Analog Devices markets the ADF4110 as a production part. The architecture allows the reference input to be divided and compared with the divided feedback signal. The phase-frequency detector and charge pump then drive the tuning interface of a voltage-controlled oscillator. Exact counter widths, divider values, reference-frequency limits, output characteristics, pin names, and electrical limits should be confirmed in the manufacturer datasheet before layout or firmware release. Typical uses include wireless receiver and transmitter local oscillators, RF upconversion and downconversion chains, and other frequency-generation systems requiring programmable RF channel selection. The device is most useful when the system already provides a stable reference and a suitable external VCO or oscillator arrangement. Designers should preserve the required loop-filter components, keep RF and reference routing short, and verify phase-noise and lock-time behavior with the actual VCO and reference source. The PLL is not a standalone fixed-frequency oscillator; its external loop and reference design determine much of the final performance.

RFQ پەیوەندی
ADF4110BRU-REEL - 550 MHz Integer-N PLL | Analog Devices (Tape & Reel)
ADF4110BRU-REEL

ADF4110BRU-REEL - 550 MHz Integer-N PLL | Analog Devices (Tape & Reel)

The Analog Devices ADF4110BRU-REEL is a single integer-N radio-frequency phase-locked loop frequency synthesizer with a maximum PLL frequency of 550 MHz, programmable dual-modulus prescaler, and a 16-pin TSSOP package. The verified distributor listing identifies the part as a clock/frequency synthesizer with a 5 MHz input, 550 MHz maximum frequency, and 165 MHz output parameter. An RF PLL is a frequency synthesizer that locks a voltage-controlled oscillator to a stable reference frequency. It belongs to the clock and timing hierarchy: RF frequency synthesizer, PLL frequency synthesizer, clock and timing IC, and semiconductor. The ADF4110 family is intended for wireless receiver and transmitter local oscillators, where a programmable divider, phase-frequency detector, charge pump, A counter, and B counter establish the required output frequency. The key verified features include a 5.5 V power supply, a separate charge-pump supply that allows an extended tuning-voltage range, programmable dual-modulus prescaler, programmable charge-pump currents, and support for 3 V systems. The 550 MHz upper PLL frequency is relevant to RF communications designs, while the 16-TSSOP package supports compact surface-mount implementation. Analog Devices markets the ADF4110 as a production part. The architecture allows the reference input to be divided and compared with the divided feedback signal. The phase-frequency detector and charge pump then drive the tuning interface of a voltage-controlled oscillator. Exact counter widths, divider values, reference-frequency limits, output characteristics, pin names, and electrical limits should be confirmed in the manufacturer datasheet before layout or firmware release. Typical uses include wireless receiver and transmitter local oscillators, RF upconversion and downconversion chains, and other frequency-generation systems requiring programmable RF channel selection. The device is most useful when the system already provides a stable reference and a suitable external VCO or oscillator arrangement. Designers should preserve the required loop-filter components, keep RF and reference routing short, and verify phase-noise and lock-time behavior with the actual VCO and reference source. The PLL is not a standalone fixed-frequency oscillator; its external loop and reference design determine much of the final performance.

RFQ پەیوەندی
ADF4110BRUZ - 550MHz Integer-N RF PLL | Analog Devices
ADF4110BRUZ

ADF4110BRUZ - 550MHz Integer-N RF PLL | Analog Devices

Analog Devices ADF4110BRUZ is a single-channel, integer-N radio-frequency phase-locked-loop frequency synthesizer designed for local-oscillator generation up to 550 MHz. The device operates from a 2.7 V to 5.5 V supply and is packaged in a 16-pin TSSOP measuring 0.173 inch, or 4.40 mm, in body width. Its nominal supply current is 4.5 mA, making it suitable for compact RF receiver, transmitter, and frequency-conversion systems. An RF phase-locked loop is a feedback-controlled timing system in which a phase-frequency detector compares a reference signal with a divided RF feedback signal. A charge pump and external loop filter convert that phase error into a control voltage for a voltage-controlled oscillator. The resulting output locks to the reference frequency while the programmable divider determines the synthesized frequency. This architecture places ADF4110 within the broader clock-and-timing IC, frequency-synthesizer, PLL, and RF signal-chain hierarchies. The ADF4110 family combines a low-noise digital phase-frequency detector, a precision charge pump, programmable integer-N division, and a programmable prescaler. The manufacturer identifies the family as being suitable for local oscillators in the up-conversion and down-conversion sections of wireless receivers and transmitters. Its 550 MHz maximum synthesis frequency provides useful coverage for industrial, communication, test-and-measurement, and embedded RF equipment. Programming is performed through a serial data interface with clock, data, and latch-enable signals. The external loop filter is a central part of the control loop, and its component values must be calculated for the target reference frequency, division ratio, phase-detector frequency, and desired phase-noise and lock-time behavior. Designers should follow the loop-filter design procedure and reference circuitry in the Analog Devices ADF4110 family data sheet rather than relying on generic filter values. Typical applications include RF local oscillators, wireless receiver and transmitter up-converters and down-converters, IF-generation stages, frequency-agile test equipment, and communications modules requiring a stable synthesized carrier. In these systems, the PLL translates one stable reference into an RF output that can be selected by changing the divider settings. The low 4.5 mA supply current can reduce system overhead where board area and power consumption are constrained. A critical design consideration is the separation of sensitive reference, feedback, and charge-pump paths on the PCB. Keep the charge-pump and loop-filter components close to their associated pins, use a continuous ground reference, and route high-level RF traces away from the phase detector and reference input. Confirm lock behavior, spur performance, and phase noise with the intended VCO and filter before releasing the design to production. This product page combines the manufacturer specifications, package information, application guidance, practical design notes, and a structured comparison of related frequency synthesizers. It is intended to help engineers evaluate the ADF4110BRUZ as an RF PLL, understand its programming and loop-filter requirements, and determine whether its 550 MHz integer-N architecture fits a new receiver, transmitter, or laboratory RF design.

RFQ پەیوەندی
ADF4110BRUZ-RL7 - 550MHz Integer-N PLL | Analog Devices
ADF4110BRUZ-RL7

ADF4110BRUZ-RL7 - 550MHz Integer-N PLL | Analog Devices

Analog Devices ADF4110BRUZ-RL7 is a single integer-N phase-locked loop frequency synthesizer with a maximum RF input frequency of 550 MHz, programmable reference and feedback counters, a programmable prescaler, and a phase-frequency detector. The device is packaged in a 16-lead TSSOP measuring 4.40 mm wide. A PLL frequency synthesizer is a timing and frequency-control IC that locks an output frequency to a stable reference. Its hierarchy extends from RF clock and frequency synthesizer to phase-locked loop, clock-generation IC, and power-management-independent signal-chain device. The ADF4110 family supports wireless receiver and transmitter local oscillators by combining a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, 6-bit A counter, 13-bit B counter, and dual-modulus P/P+1 prescaler. Key features include the 550 MHz maximum synthesizer frequency, integer-N architecture, programmable prescaler, programmable A and B counters, and a programmable reference divider. The charge-pump and phase-frequency detector support closed-loop frequency generation, while the counters establish the required multiplication ratio. These functions make the ADF4110 suitable for RF local-oscillator generation, modulation and demodulation systems, wireless transceiver tuning, and precision test equipment. The ADF4110BRUZ-RL7 is identified as a production device by Analog Devices. Its 16-TSSOP package supports compact surface-mount layouts, although the relatively narrow package requires careful fanout from the fine-pitch leads. The suffix identifies the specific orderable package, temperature, and reel configuration; the manufacturer product page and family datasheet should be used for final manufacturing and lot-control requirements. Typical applications include GSM and other wireless receiver local oscillators, wireless transmitter up-conversion and down-conversion paths, industrial RF test equipment, and instrumentation requiring programmable synthesized RF. In these systems, a crystal oscillator or TCXO can provide the reference signal, while the ADF4110 produces a programmable output locked to that reference for coherent mixing or channel selection. PCB design should keep the reference, charge-pump, and RF feedback paths compact and away from noisy switching nodes. Confirm loop-filter component values, prescaler selection, counter limits, and allowable operating regions against the manufacturer datasheet before tuning. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks, and preserve the specified decoupling and grounding layout to minimize phase noise and spurious signals.

RFQ پەیوەندی
ADF4111BCP - 1.2 GHz Integer-N PLL | Analog Devices
ADF4111BCP

ADF4111BCP - 1.2 GHz Integer-N PLL | Analog Devices

The Analog Devices ADF4111BCP is a single-channel, integer-N frequency synthesizer with a programmable dual-modulus prescaler, precision charge pump, programmable reference divider, and programmable A and B counters. It supports synthesis up to 1.2 GHz and operates from a 5.5 V power supply in a 20-pin LFCSP package with an exposed pad. The device belongs to the PLL frequency-synthesizer family used for local oscillators in wireless transmitters and receivers. A PLL frequency synthesizer is a feedback-controlled timing IC that locks a programmable output oscillator to a stable reference frequency. Its hierarchy is PLL frequency synthesizer > frequency synthesizer > clock and timing IC > integrated circuit. Within that hierarchy, the ADF4111 is an integer-N architecture, meaning the prescaler, A counter, and B counter divide the reference and feedback signals through an integer relationship to establish the output frequency. Key features include a programmable dual-modulus prescaler, programmable charge-pump currents, a programmable reference divider, a 6-bit A counter, and a 13-bit B counter. The separate charge-pump supply permits an extended tuning-voltage range, while the 5.5 V supply arrangement supports low-voltage RF system integration. Its integer-N architecture is useful when fractional-N frequency synthesis is unnecessary and a straightforward integer division ratio is preferred. Technically, the ADF4111 combines a low-noise digital phase-frequency detector, a precision charge pump, a reference divider, and the dual-modulus prescaler into a single frequency-synthesizer IC. The phase-frequency detector compares the divided reference and feedback signals; the charge pump converts phase and frequency errors into a tuning voltage that controls the external voltage-controlled oscillator. This architecture supports local-oscillator generation in RF upconversion and downconversion paths. Typical applications include wireless receiver and transmitter local oscillators, instrumentation and test equipment, industrial RF control, and frequency-generation modules operating below the device's 1.2 GHz upper synthesis limit. The 20-pin LFCSP surface-mount package supports compact RF boards, but its exposed pad requires careful PCB thermal design and a low-impedance ground connection. The primary design consideration is the analog loop around the external VCO. Component values for the loop filter and charge-pump current must be selected from the intended reference frequency, phase noise requirement, VCO gain, prescaler, and lock-time target. The exposed pad should be connected to ground through a short thermal-via path, and high-frequency reference and RF routing should remain controlled and short. This page consolidates the verified Analog Devices product information, package details, lifecycle information, sourcing links, and application guidance into one engineering-focused reference. It also distinguishes true drop-in family alternatives from newer synthesizer architectures that may use the same package family but provide different interfaces or frequency-generation features.

RFQ پەیوەندی
ADF4111BCPZ - 1.4 GHz RF PLL Synthesizer | Analog Devices
ADF4111BCPZ

ADF4111BCPZ - 1.4 GHz RF PLL Synthesizer | Analog Devices

The Analog Devices ADF4111BCPZ is a single-channel RF phase-locked-loop frequency synthesizer rated up to 1.4 GHz and supplied in a 20-lead WFQFN exposed-pad package. Its principal functions include a low-noise digital phase-frequency detector, a precision charge pump, programmable reference and feedback dividers, A and B counters, and a dual-modulus prescaler. These functions make it suitable for programmable local oscillators in wireless transmitters and receivers. An RF PLL frequency synthesizer generates an output locked to a stable reference signal. A phase-frequency detector compares the divided feedback signal with the divided reference, while the charge pump and loop filter convert phase error into a control voltage for the prescaler and output stage. In the ADF4110 family, this architecture supports integer-N frequency synthesis for coherent RF signal generation and frequency translation. The ADF4111BCPZ combines programmable division with a maximum listed operating frequency of 1.4 GHz. The reference path includes a programmable reference divider, while programmable A and B counters and a dual-modulus P/P+1 prescaler establish the integer-N feedback ratio. These controls allow the same synthesizer architecture to serve multiple channels and output frequencies without changing the RF front-end hardware. The device's low-noise digital phase-frequency detector supports stable lock behavior in systems where phase noise and reference quality are important. The precision charge-pump current is a key loop-design parameter because it works with the external loop filter to establish loop bandwidth, damping, lock time, and reference-spur performance. Component tolerances and charge-pump current must be considered together when setting lock bandwidth. Typical applications include wireless receiver and transmitter local oscillators, up-converter and down-converter reference planes, instrumentation equipment, and other RF systems requiring a programmable, phase-locked output. The 20-WFQFN exposed-pad package supports compact surface-mount layouts, although careful thermal and grounding layout remains necessary. For a new design, place the reference and feedback components close to their associated pins, use a symmetrical RF output path, and connect the exposed pad to a low-impedance ground plane. Validate loop-filter component values, reference-divider ratios, and lock performance across the intended frequency range and temperature range before production release. This product overview combines the verified device identity, package information, family architecture, and application context with practical guidance for PLL layout and integration. It also identifies where replacement decisions require a package- and pin-level review rather than frequency capability alone.

RFQ پەیوەندی
ADF4111BCPZ-RL7 - 1.4 GHz RF Clock Synthesizer | ADI
ADF4111BCPZ-RL7

ADF4111BCPZ-RL7 - 1.4 GHz RF Clock Synthesizer | ADI

Analog Devices ADF4111BCPZ-RL7 is a single-channel RF frequency synthesizer and phase-locked-loop IC with a maximum stated operating frequency of 1.4 GHz, packaged in a 20-lead LFCSP with exposed pad. Its radio-frequency input range is listed as 5 MHz to 1.4 GHz, while the cited output frequency reaches 165 MHz. The device is designed for frequency generation and local-oscillator implementations in wireless receivers and transmitters. A phase-locked loop, or PLL, is a closed-loop timing and frequency-control system. In a frequency synthesizer, a phase-frequency detector compares a divided reference signal with a feedback signal derived from the output. A precision charge pump then drives a loop filter, and the controlled oscillator or prescaler adjusts the output until the phase and frequency error is minimized. The ADF4110 family combines this feedback architecture with programmable counters for practical wireless frequency synthesis. The ADF4111 family includes a low-noise digital phase-frequency detector, a precision charge pump, a programmable reference divider, programmable A and B counters, and a dual-modulus prescaler identified as P/P+1. The A counter is 6 bits and the B counter is 13 bits. This architecture allows the reference and feedback paths to be divided under digital control so the synthesizer can produce a programmed output frequency. The ADF4111BCPZ-RL7 is offered in a 20-lead LFCSP exposed-pad package and tape-and-reel ordering. Its compact surface-mount construction is intended for RF and microwave boards where component area is constrained. The exposed pad provides the primary thermal and electrical connection to the PCB, making careful pad layout, ground-plane integration, and thermal via placement essential parts of a successful implementation. Typical uses include wireless receiver local oscillators, wireless transmitter local oscillators, up-conversion and down-conversion sections, RF signal-chain clocking, and communication equipment requiring programmable frequency generation. The synthesizer architecture is particularly useful when the system must derive a stable, programmable RF local-oscillator signal from a reference source. A critical design consideration is loop-filter implementation. Component values in the charge-pump, reference, and feedback paths directly determine lock behavior, phase noise, reference spur performance, and the usable tuning bandwidth. Use the Analog Devices evaluation hardware and manufacturer application guidance to validate loop dynamics before committing the filter and board layout to production. This page combines the manufacturer product information, package details, sourcing guidance, and application-focused engineering guidance for engineers evaluating the ADF4111BCPZ-RL7 as an RF clock and frequency synthesizer.

RFQ پەیوەندی
ADF4111BRU - 1.2 GHz Integer-N PLL | Analog Devices
ADF4111BRU

ADF4111BRU - 1.2 GHz Integer-N PLL | Analog Devices

The Analog Devices ADF4111BRU is a single integer-N frequency synthesizer and phase-locked loop (PLL) with a 1.2 GHz maximum PLL frequency, programmable dual-modulus prescaler, and programmable charge-pump current. The device accepts a reference frequency between 5 MHz and 1.4 GHz, uses a 165 MHz maximum output frequency according to distributor data, and is supplied in a 16-pin TSSOP package measuring 0.173 inch, or 4.40 mm, in width. An integer-N PLL is a frequency-generation IC that locks an output oscillator to a stable reference by comparing the divided output phase with the reference phase. A phase-frequency detector measures the phase error, and a charge pump converts that error into a control current for an external voltage-controlled oscillator (VCO). In the broader hierarchy, the ADF4111BRU is a PLL-based frequency synthesizer, a clock-and-timing IC, and ultimately a semiconductor used to produce stable local-oscillator signals. Key features include a 1.2 GHz nominal maximum PLL frequency for the ADF4111 device, a programmable dual-modulus P/P+1 prescaler, programmable charge-pump currents, and programmable reference and counter functions. A separate charge-pump supply permits an extended tuning-voltage range, while the 5.5 V power supply supports integration into RF receiver and transmitter systems operating from 3 V-class logic environments. Technically, the ADF4111 belongs to the ADF4110 family of frequency synthesizers. Its low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, programmable A and B counters, and dual-modulus prescaler form the core signal path. These functions allow an external reference and VCO to be combined into a closed-loop PLL capable of supporting wireless upconversion and downconversion architectures. Typical applications include GSM and other wireless receiver local oscillators, wireless transmitter upconversion sections, RF downconversion chains, frequency-locked test equipment, and communication systems requiring a programmable RF frequency. The main design consideration is loop stability: the prescaler, charge-pump setting, reference-divider ratio, loop filter, and VCO must be evaluated together rather than selected independently. Use the manufacturer datasheet and reference circuitry to select loop-filter values, verify lock range, route the sensitive reference and feedback paths cleanly, and confirm that the external VCO tuning range covers the required output band. This page combines verified manufacturer and distributor information, drop-in replacement analysis, and practical PLL design guidance.

RFQ پەیوەندی
ADF4111BRUZ - 1.4 GHz PLL Synthesizer | Analog Devices
ADF4111BRUZ

ADF4111BRUZ - 1.4 GHz PLL Synthesizer | Analog Devices

Analog Devices ADF4111BRUZ is a single integer-N phase-locked-loop frequency synthesizer with a 1.4 GHz maximum RF input, programmable prescaler and charge pump, and external reference input in a 16-lead TSSOP package. The manufacturer classifies the device as a production single integer-N PLL and identifies an operating temperature range of -40°C to +85°C. A phase-locked loop, or PLL, is a feedback-controlled oscillator system that locks a programmable output frequency to a stable reference. Within the frequency-synthesizer hierarchy, the ADF4111 integrates a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, programmable A and B counters, and a dual-modulus prescaler. It is intended for generating local-oscillator signals used in RF up-conversion and down-conversion paths. The principal features of the ADF4111BRUZ are its 1.4 GHz RF input capability, integer-N frequency synthesis, programmable reference and feedback paths, and integrated charge-pump and digital phase-detection functions. These characteristics make the device useful where a radio transceiver requires an RF local oscillator derived from a lower-frequency reference. The BRUZ package designation identifies the leaded 16-TSSOP form used for board-level RF and communications equipment. In operation, the reference signal passes through the programmable reference divider, while the RF feedback signal passes through the prescaler and feedback counters. The phase-frequency detector compares the divided signals, and the charge pump drives the loop-filter output. That control voltage adjusts the external voltage-controlled oscillator, which is then divided back through the feedback path. The external VCO and passive loop-filter component values remain central to phase-noise, reference-spur, lock-time, and channel-spacing performance. The ADF4111BRUZ is appropriate for wireless receiver and transmitter local oscillators, including systems operating around cellular, radio, microwave, and related RF bands. It can also support test-and-measurement RF sources, instrumentation, and frequency-conversion subsystems where a programmable PLL is preferable to a fixed oscillator. The integrated digital divider and synthesizer functions reduce the number of separate frequency-control blocks required around an external VCO. A primary design consideration is that the ADF4111BRUZ does not generate a microwave output directly; it controls an external VCO. Component selection for the VCO, loop filter, reference source, crystal, and decoupling network therefore remains critical. The RF input, reference input, charge-pump output, and digital programming interface should follow the manufacturer’s recommended application circuit and pin-description table to achieve predictable phase noise and lock behavior. This page combines the manufacturer product information, distributor identification, package details, and application guidance with a parameter-by-parameter family comparison. It also identifies which ADF411x-family devices use the same 16-lead TSSOP format and highlights where functional differences require simulation or laboratory verification before substitution.

RFQ پەیوەندی
ADF4111BRUZ-RL7 - 1.4 GHz Integer-N PLL | Analog Devices
ADF4111BRUZ-RL7

ADF4111BRUZ-RL7 - 1.4 GHz Integer-N PLL | Analog Devices

Analog Devices ADF4111BRUZ-RL7 is a single-channel, integer-N phase-locked loop frequency synthesizer with a maximum operating frequency of 1.4 GHz, supplied in a 16-lead TSSOP package. It provides programmable prescaling, programmable A and B counters, a reference divider, a phase-frequency detector, and a charge-pump output for external loop-filter implementation. The device is intended for precision local-oscillator generation in wireless receivers, transmitters, and other RF signal chains. A phase-locked loop, or PLL, is a frequency-control system in which a voltage-controlled oscillator is phase and frequency locked to a stable reference. An integer-N PLL divides the feedback frequency by an integer, making it particularly useful for RF channels requiring a rational relationship between the reference oscillator and output carrier. The ADF4111 belongs to the broader clock-and-timing IC hierarchy, where it combines a digital phase-frequency detector and programmable frequency dividers with an analog charge pump for driving an external voltage-controlled oscillator loop. The principal features include a 1.4 GHz maximum frequency rating, a programmable dual-modulus prescaler, a 6-bit A counter, and a 13-bit B counter according to the Analog Devices family description. A programmable reference divider supports use with reference frequencies that require division before comparison. The architecture also includes a low-noise digital phase-frequency detector and a precision charge pump, allowing the loop bandwidth, phase noise, and lock behavior to be shaped through the external loop filter and reference design. Operationally, the charge-pump output drives an external loop-filter network connected to the VCO. The reference signal and divided feedback are compared by the phase-frequency detector, and the charge pump produces a correction current that adjusts the VCO control voltage until phase and frequency lock are achieved. Because this is an integer-N architecture, the programmable feedback division ratio is an integer, so the achievable output frequencies are constrained by the relationship between the reference frequency, reference divider, and integer feedback divider. The ADF4111 is suitable for wireless local-oscillator and frequency-conversion applications, including receiver and transmitter up-conversion or down-conversion paths. It can also support instrumentation, test equipment, and other RF systems requiring programmable frequency generation with a fixed or controlled reference. Designers must select the prescaler, counter values, reference divider, charge-pump current, and loop-filter components to satisfy the required channel spacing and phase-noise performance. A critical design consideration is loop stability. The passive components connected between the charge-pump output and the VCO control input determine loop dynamics, reference-spur behavior, and lock range. PCB layout should keep the charge-pump and loop-filter paths compact, provide a stable ground reference, and isolate noisy switching nodes from sensitive feedback and reference routing. High-frequency signal routing also requires controlled impedance and short return paths. This page combines the exact orderable MPN, verified package and frequency information, practical PLL design guidance, source-backed technical context, and application-specific selection criteria. It is intended to help engineers identify the correct Analog Devices frequency synthesizer, plan its loop filter, assess package-level implementation, and determine whether a listed same-family device is suitable for an existing 16-lead TSSOP design.

RFQ پەیوەندی
ADF4112BCP - 3 GHz Integer-N PLL | Analog Devices
ADF4112BCP

ADF4112BCP - 3 GHz Integer-N PLL | Analog Devices

Analog Devices ADF4112BCP is a single-channel, integer-N frequency synthesizer with a 3.0 GHz maximum operating frequency, a programmable dual-modulus prescaler, and programmable charge-pump currents for wireless receiver and transmitter local oscillators. The device accepts a 5 MHz to 3 GHz input range and is supplied in a 20-pin LFCSP with exposed pad. It also supports a separate charge-pump supply for extended tuning-voltage range. The ADF4112 integrates a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, programmable A and B counters, and a programmable P/P+1 prescaler. This architecture supports integer-N local-oscillator generation for wireless upconversion and downconversion paths. The ADF4110 family is positioned within the broader RF frequency-synthesizer and clock-and-timing IC hierarchy, where a PLL locks an adjustable output frequency to a stable reference. According to the Analog Devices ADF4112 product page and Data Sheet Rev. F, the ADF4112 is in production and has a list-price starting point of $3.55. The 20-pin LFCSP exposed-pad package permits compact RF layouts, but the exposed pad must be connected to the appropriate ground plane and thermal design must account for charge-pump and digital power dissipation. Although the ADF4112 is not a fractional-N synthesizer, its programmable reference divider, prescaler, A counter, B counter, and charge-pump settings provide flexible integer-N frequency planning for RF and communication equipment. For applications requiring dual-channel or fractional-N synthesis, a different device family should be evaluated rather than assuming direct compatibility.

RFQ پەیوەندی
ADF4112BCP-REEL - 3 GHz Integer-N PLL | Analog Devices (Tape & Reel)
ADF4112BCP-REEL

ADF4112BCP-REEL - 3 GHz Integer-N PLL | Analog Devices (Tape & Reel)

Analog Devices ADF4112BCP-REEL is a single-channel, integer-N frequency synthesizer with a 3.0 GHz maximum operating frequency, a programmable dual-modulus prescaler, and programmable charge-pump currents for wireless receiver and transmitter local oscillators. The device accepts a 5 MHz to 3 GHz input range and is supplied in a 20-pin LFCSP with exposed pad. It also supports a separate charge-pump supply for extended tuning-voltage range. The ADF4112 integrates a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, programmable A and B counters, and a programmable P/P+1 prescaler. This architecture supports integer-N local-oscillator generation for wireless upconversion and downconversion paths. The ADF4110 family is positioned within the broader RF frequency-synthesizer and clock-and-timing IC hierarchy, where a PLL locks an adjustable output frequency to a stable reference. According to the Analog Devices ADF4112 product page and Data Sheet Rev. F, the ADF4112 is in production and has a list-price starting point of $3.55. The 20-pin LFCSP exposed-pad package permits compact RF layouts, but the exposed pad must be connected to the appropriate ground plane and thermal design must account for charge-pump and digital power dissipation. Although the ADF4112 is not a fractional-N synthesizer, its programmable reference divider, prescaler, A counter, B counter, and charge-pump settings provide flexible integer-N frequency planning for RF and communication equipment. For applications requiring dual-channel or fractional-N synthesis, a different device family should be evaluated rather than assuming direct compatibility.

RFQ پەیوەندی
ADF4112BCPZ - 3GHz Integer-N RF PLL | Analog Devices
ADF4112BCPZ

ADF4112BCPZ - 3GHz Integer-N RF PLL | Analog Devices

Analog Devices ADF4112BCPZ is a single integer-N RF phase-locked-loop frequency synthesizer rated to 3 GHz, with RF bandwidth extending to 4 GHz and operation from a 3.3 V supply in a 20-lead LFCSP exposed-pad package. The device combines a programmable dual-modulus prescaler, precision charge pump, programmable reference divider, phase-frequency detector, and programmable A and B counters. An RF PLL frequency synthesizer is a closed-loop timing-control IC that locks a voltage-controlled oscillator to a stable reference frequency. It belongs to the phase-locked-loop family, which provides frequency synthesis, clock generation, modulation, and frequency translation within wireless transmitters and receivers. The ADF4112 supports CMOS or TTL reference inputs and produces a clock output for use as a local oscillator or system clock source. Key features include an RF bandwidth of 4 GHz, a programmable 4/5 or 8/9 dual-modulus prescaler, programmable charge-pump current, and a separate VP connection for extended tuning-voltage capability. The product page identifies the A counter as 6 bits and the B counter as 13 bits, allowing programmable division ratios. The 3.3 V supply operation suits compact RF and wireless designs using contemporary low-voltage signal-chain architectures. Technically, the synthesizer uses an integer-N architecture to generate an output frequency derived from the reference, reference divider, prescaler, and programmable feedback counters. Its phase-frequency detector and charge pump generate an error current that controls the tuning path of an external voltage-controlled oscillator. A properly selected loop filter and external VCO remain central to achieving low phase noise, adequate locking time, and clean spectral performance. Typical applications include wireless receiver and transmitter local oscillators, up-conversion and down-conversion sections in RF systems, instrumentation and test equipment, and frequency-generation modules for industrial or communication equipment. Its 3 GHz maximum output frequency makes it suitable for systems operating within the RF bandwidth of the device when the prescaler, counters, reference, VCO, and loop filter are configured correctly. Design around the separate VP pin by reviewing the external VCO tuning range and charge-pump requirements in the manufacturer datasheet. Keep the RF output path short, use a controlled reference signal, and place loop-filter components close to the synthesizer pins. Thermal design should account for the exposed pad and the copper area available on the PCB. This product page combines the exact ADF4112BCPZ identifiers, verified package information, application guidance, design considerations, and a conservative replacement analysis. It focuses on engineering suitability rather than treating a related PLL as interchangeable without verified pin and parameter equivalence.

RFQ پەیوەندی
ADF4112BCPZ-RL7 - 3 GHz Integer-N PLL | Analog Devices
ADF4112BCPZ-RL7

ADF4112BCPZ-RL7 - 3 GHz Integer-N PLL | Analog Devices

The Analog Devices ADF4112BCPZ-RL7 is a single-channel, integer-N radio-frequency phase-locked loop frequency synthesizer with a maximum operating frequency of 3 GHz, a 4 GHz RF bandwidth, and a 20-lead WFQFN exposed-pad CSP package. It combines a programmable dual-modulus prescaler, programmable charge-pump current, a programmable reference divider, and integer A and B counters for local-oscillator generation in wireless receivers and transmitters. A frequency synthesizer is a clock-and-timing IC that locks an output oscillator to a stable reference frequency. In the ADF4110 family hierarchy, the phase-frequency detector compares the divided reference with the divided feedback signal, while the charge pump converts phase and frequency error into a control voltage for an external voltage-controlled oscillator. This PLL is therefore an integer-N RF synthesizer rather than a fixed-frequency clock generator or a direct RF mixer. Key features include a maximum frequency of 3 GHz, RF bandwidth to 4 GHz, a 2.7 V to 5.5 V supply range, and selectable 4/5 and 8/9 prescaler ratios. The 6-bit A counter and 13-bit B counter establish the programmable integer-N division ratio. Programmable charge-pump currents support adjustment of loop current, while the reference divider permits division of the external reference signal. The ADF4110 family architecture uses a low-noise digital phase-frequency detector, a precision charge pump, a programmable reference divider, programmable A and B counters, and a dual-modulus P/P+1 prescaler. The synthesizer produces a tuning voltage through the charge-pump output, so an external loop filter, tank circuit, and VCO are normally required. The separate supply or voltage arrangement should follow the pin-description and application-circuit tables in the manufacturer datasheet. Typical applications include wireless receiver and transmitter local oscillators, RF up-conversion and down-conversion stages, wireless communication equipment, and test equipment requiring programmable RF synthesis. The 3 GHz ceiling is appropriate for many conventional RF bands, while the 4 GHz RF bandwidth supports higher operating conditions described by Analog Devices. Designers must still verify the VCO range, divider path, reference ratio, and lock-range requirements for the intended channel plan. The critical design consideration is loop behavior. Prescaler choice, charge-pump current, reference-divider ratio, filter resistance and capacitance, and VCO tuning range determine lock time, phase noise, reference spurs, and maximum achievable output frequency. Use the manufacturer application information to select the prescaler, filter components, and external VCO before treating the ADF4112BCPZ-RL7 as a complete frequency-generation solution. This product page combines the ADF4112 technical specifications, package and ordering information, pin-compatible family candidates, comparison parameters, and practical RF layout guidance into one engineering reference. It also highlights where external RF and passive components are required, helping designers distinguish the synthesizer IC from a standalone oscillator or complete RF signal chain.

RFQ پەیوەندی
ADF4112BRU - 3 GHz Integer-N PLL | Analog Devices
ADF4112BRU

ADF4112BRU - 3 GHz Integer-N PLL | Analog Devices

Analog Devices ADF4112BRU is an integer-N phase-locked loop frequency synthesizer rated to 3.0 GHz, supplied in a 16-lead TSSOP package. It combines a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, programmable A and B counters, and a dual-modulus prescaler. The device supports a 5.5 V power supply and a separate charge-pump supply, making it suitable for RF local-oscillator and clock-generation systems that require programmable frequency synthesis. A PLL frequency synthesizer is a clock-and-timing integrated circuit that locks an output oscillator to a stable reference frequency. Within the power-management and signal-chain hierarchy, the ADF4112 belongs to the frequency-synthesizer class, where the phase detector, charge pump, counters, prescaler, and voltage-controlled oscillator work as a closed feedback loop. Its integer-N architecture simplifies programming because the feedback division ratio is formed from integer counters rather than a fractional divider. The verified product information identifies a 3 GHz maximum PLL operating frequency, a 5.5 V supply, a separate charge-pump supply, programmable reference and counter functions, and programmable charge-pump currents. The 16-TSSOP package provides a compact surface-mount footprint suitable for RF boards, instrumentation, communications equipment, and test-and-measurement systems. The manufacturer product page lists the part as production and provides a starting list price of $3.55. In operation, the reference signal passes through the programmable reference divider, while the feedback path uses the prescaler and A/B counters. The phase-frequency detector compares the divided reference and feedback signals, and the charge pump converts the phase error into a tuning voltage for the external voltage-controlled oscillator. A separate charge-pump supply permits extended tuning voltage, while programmable current helps tune loop dynamics. Typical applications include wireless receiver and transmitter local oscillators, RF upconversion and downconversion stages, instrumentation, and communications test equipment. Because the target is an integer-N device, designs needing fractional-N synthesis may require a different part. This page combines verified manufacturer and distributor information with practical configuration guidance, helping engineers distinguish function from package and evaluate replacement constraints. Designers should verify the complete datasheet for counter widths, prescaler options, reference-input limits, output-driver configuration, loop-filter requirements, and exposed thermal behavior before layout. The reference and feedback paths require careful RF routing, while the charge-pump and loop-filter components must be placed close to the relevant pins to minimize noise and phase error. Pricing shown in this record reflects the manufacturer listing available as of 2026-10-23.

RFQ پەیوەندی
ADF4112BRUZ - 3 GHz Integer-N PLL | Analog Devices
ADF4112BRUZ

ADF4112BRUZ - 3 GHz Integer-N PLL | Analog Devices

Analog Devices ADF4112BRUZ is a single-channel, integer-N radio-frequency phase-locked-loop frequency synthesizer with a maximum operating frequency of 3 GHz. The device is a BiCMOS clock/frequency synthesizer IC packaged in a 16-pin TSSOP with a 4.40 mm package width. It operates from a 2.7 V to 5.5 V supply and draws 6.5 mA, making it suitable for compact wireless receiver and transmitter equipment. An integer-N frequency synthesizer belongs to the phase-locked-loop, clock-generation, and RF frequency-generation hierarchy. Its phase-frequency detector compares a divided reference signal with a divided feedback signal, while its programmable counters and dual-modulus prescaler determine the synthesized output frequency. This architecture provides programmable frequency generation for RF local oscillators, up-conversion and down-conversion chains, and other systems requiring a stable output related to a reference clock. The ADF4112 integrates a low-noise digital phase-frequency detector, a precision charge pump, a programmable reference divider, programmable A and B counters, and a programmable dual-modulus prescaler. These functional blocks allow the output frequency to be established through a serial programming interface. The 3 GHz upper operating frequency supports RF signal chains operating below that limit, while the 2.7 V minimum supply permits use in systems with a 3 V nominal supply. The ADF4110 family architecture is intended for wireless receiver and transmitter local oscillators. In a transmitter, the synthesizer can generate a programmable local oscillator for RF up-conversion. In a receiver, it can provide the local oscillator used during RF down-conversion. The integer-N approach is particularly useful when the desired frequency relationship to the reference can be represented with integer division ratios and when compact implementation is a priority. Typical uses include wireless transceivers, RF front ends, local-oscillator modules, frequency-agile test equipment, and communication systems operating below 3 GHz. The 16-pin TSSOP package also allows reuse of PCB layouts designed for compatible members of the ADF4110 family, subject to careful verification of pin functions, register compatibility, prescaler options, and operating limits. The most important design consideration is the loop-filter and reference-divider implementation. A suitable external loop filter must provide the required phase margin and loop bandwidth for the intended reference and synthesis frequencies. The charge-pump output should be kept short and surrounded by an appropriate ground-return path, while decoupling capacitors should be positioned close to the supply and ground pins. This page combines the key ADF4112BRUZ operating facts, family-level replacement considerations, verified package information, application guidance, and practical design notes. It is intended to help engineers identify the correct PLL for an RF design and distinguish a true same-footprint option from a merely similar frequency synthesizer.

RFQ پەیوەندی
ADF4113BCP - 4GHz Integer-N PLL | Analog Devices
ADF4113BCP

ADF4113BCP - 4GHz Integer-N PLL | Analog Devices

The Analog Devices ADF4113BCP is a single integer-N phase-locked-loop frequency synthesizer with a 4.0 GHz maximum RF input, programmable dual-modulus prescaler, and programmable charge-pump current, packaged in a 20-lead LFCSP with an exposed pad. It operates from a 2.7 V to 5.5 V supply range and supports a separate charge-pump supply at VP, allowing an extended tuning-voltage range. The device also supports 3 V systems, making it suitable for low-voltage RF and wireless signal chains. A phase-locked loop is a feedback-controlled timing system in which a programmable frequency divider and phase-frequency detector compare a divided reference signal with a divided feedback signal. The charge pump converts phase error into a tuning voltage that controls a voltage-controlled oscillator. The ADF4113 belongs to the broader frequency-synthesizer hierarchy, where PLL means phase-locked loop and integer-N describes synthesis through integer prescaler and feedback-counter division. Key features include the 4.0 GHz RF input limit, programmable prescaler, selectable charge-pump currents, and a separate VP supply for greater tuning-voltage headroom. Its integer-N architecture simplifies programming compared with fractional-N synthesizers because the feedback division ratio is an integer. The 20-lead surface-mount package supports compact RF designs, while the exposed pad provides a thermal and electrical connection to the PCB. The internal architecture combines a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, programmable A and B counters, and a dual-modulus P/P+1 prescaler. The A and B counters determine the feedback division ratio, while the prescaler divides the RF feedback signal before it reaches the phase-frequency detector. This arrangement supports integer-N local-oscillator generation for wireless receivers and transmitters. Typical uses include GSM and other wireless receiver or transmitter local oscillators, radio-frequency down-conversion and up-conversion stages, RF instrumentation, and communications equipment requiring programmable frequency synthesis. The on-chip reference divider is also useful when the available reference frequency must be divided before comparison with the feedback path. The supplied family documentation specifically identifies wireless up-conversion and down-conversion local oscillators as principal applications. Designers should preserve the exposed-pad thermal path and keep RF, reference, and charge-pump routing compact. The separate VP connection can increase tuning-voltage headroom, but it must be connected according to the manufacturer’s recommended application circuit. Input, reference, and feedback layout quality directly affects phase noise and lock behavior, so controlled-impedance routing and short high-frequency paths are important. This product page combines verified manufacturer specifications, distributor availability and pricing references, package information, and a strict assessment of drop-in alternatives. It also distinguishes electrically compatible devices from lower-frequency family members that cannot replace the ADF4113BCP across its full operating range.

RFQ پەیوەندی
ADF4113BCPZ - 4 GHz Integer-N PLL | Analog Devices
ADF4113BCPZ

ADF4113BCPZ - 4 GHz Integer-N PLL | Analog Devices

The Analog Devices ADF4113BCPZ is a single integer-N phase-locked-loop frequency synthesizer rated up to 4 GHz, with a 5 MHz to 4 GHz operating range and a 20-lead LFCSP exposed-pad package. Its programmable prescaler, precision charge pump, phase-frequency detector, reference divider, and programmable A and B counters support programmable local-oscillator generation for wireless receiver and transmitter signal chains. An integer-N frequency synthesizer is a PLL-based clock and timing IC that locks a voltage-controlled oscillator to a stable reference frequency. The ADF4110 family hierarchy places the device among RF frequency synthesizers, clock generators, timing ICs, and integrated circuits. Integer-N architecture simplifies channel selection by using integer division ratios, while the phase-frequency detector and charge pump compare the divided feedback signal with the divided reference to correct oscillator phase and frequency errors. The ADF4113 supports an input reference frequency up to 165 MHz and an RF synthesis range extending to 4 GHz. Its programmable prescaler and integer-N counters provide flexible division ratios for wireless communications equipment. A low-noise digital phase-frequency detector and precision charge pump form the core feedback loop, supporting stable local-oscillator operation where predictable phase locking and programmable channel spacing are important. The family architecture includes a programmable reference divider, 6-bit A counter, 13-bit B counter, and dual-modulus P/P+1 prescaler. These blocks determine the synthesized output relationship to the reference input. The ADF4113 is therefore suited to RF up-conversion and down-conversion sections where a local oscillator must cover multiple channels without the complexity of fractional-N feedback. Typical uses include wireless receiver and transmitter local oscillators, GSM and RF communication systems, instrumentation equipment, and other frequency-generation subsystems. The 20-lead LFCSP exposed-pad package supports compact surface-mount layouts, while the exposed thermal pad provides a path for heat removal when the device operates in a demanding RF subsystem. Designers should follow the manufacturer datasheet for the pin-description table, recommended loop-filter values, reference-divider settings, charge-pump current selection, and PCB layout. Correct grounding of the exposed pad and careful routing of the reference, RF output, and synthesizer feedback paths are essential for predictable phase-locking performance and low spurious content. This page combines the ADF4113 product identity, package information, application guidance, drop-in comparison, and practical design notes. Use the manufacturer datasheet for final register programming, loop-bandwidth calculations, PCB reference geometry, and operating-limit verification.

RFQ پەیوەندی
ADF4113BCPZ-RL7 - 4 GHz RF PLL Synthesizer | Analog Devices
ADF4113BCPZ-RL7

ADF4113BCPZ-RL7 - 4 GHz RF PLL Synthesizer | Analog Devices

The Analog Devices ADF4113BCPZ-RL7 is a single-channel radio-frequency phase-locked-loop frequency synthesizer with a maximum synthesis frequency of 4 GHz, supplied in a 20-lead WFQFN surface-mount package with an exposed pad. The device integrates a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, programmable A and B counters, and a dual-modulus P/P+1 prescaler. These functional blocks form the core architecture of a programmable PLL frequency synthesizer used to generate stable local-oscillator signals. A frequency synthesizer is an electronic timing component that locks an output frequency to a stable reference frequency. Its signal path is part of the hierarchy wireless transmitter and receiver frequency generation, where a phase-locked loop supports channel selection, frequency translation, modulation, and coherent signal processing. In an RF system, the ADF4113 family is specifically positioned for local oscillators in up-conversion and down-conversion sections of wireless receivers and transmitters. The ADF4113 uses programmable counters to translate a reference frequency into the required RF output. Its 6-bit A counter supports fine channel spacing, while its 13-bit B counter establishes the broader division ratio. The dual-modulus prescaler provides P or P+1 division behavior, and the programmable reference divider accommodates reference frequencies that require division before entering the phase-frequency detector. Together, these features allow the same architecture to serve multiple RF plans and channel-spacing requirements. The low-noise digital phase-frequency detector and precision charge pump compare the divided reference with the feedback signal produced by the programmable counter chain. The charge-pump current charges or discharges the loop filter in response to phase and frequency error. Designers select external loop-filter components according to the reference frequency, target output frequency, channel spacing, phase-noise requirements, lock-time objective, and permitted phase-error excursions. Typical uses include cellular and wireless local oscillators, RF down-converters, RF up-converters, test and measurement signal sources, instrumentation, and frequency-generation subsystems. The ADF4113 is especially relevant when a design requires programmable RF output up to 4 GHz and benefits from integrating the prescaler, counters, phase detector, charge pump, and programmable reference divider into one device. PCB implementation should follow the manufacturer datasheet land pattern and pin-description table exactly. Keep the RF output route compact, connect the loop-filter components close to the charge-pump and supply pins, provide stable decoupling, and account for the exposed thermal pad when defining the copper and thermal design. Confirm that the selected reference frequency, prescaler value, A-counter value, and B-counter value produce the required channel spacing before committing the register sequence. This product page combines the manufacturer's architectural description, package information, application guidance, comparison details, and practical implementation notes. It is intended to help engineers determine whether the ADF4113BCPZ-RL7 fits a programmable RF local-oscillator design and to identify the correct family members for an adjacent frequency range.

RFQ پەیوەندی
ADF4113BRU - 4 GHz Integer-N RF PLL | Analog Devices
ADF4113BRU

ADF4113BRU - 4 GHz Integer-N RF PLL | Analog Devices

The Analog Devices ADF4113BRU is a single integer-N RF frequency synthesizer with a 4.0 GHz maximum operating frequency, programmable prescaler and charge pump, and a 16-pin TSSOP package. The device combines a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, programmable A and B counters, and a dual-modulus prescaler for local-oscillator generation in wireless receivers and transmitters. Its programmable architecture lets designers divide down a stable reference source and synthesize the required carrier frequency while controlling channel spacing through the reference divider, counters, and prescaler settings. An integer-N PLL is a frequency-synthesizer category in which the feedback prescaler and integer counters establish the output frequency while the phase-frequency detector and charge-pump network close the loop around a voltage-controlled oscillator. The ADF4110 family therefore belongs to the broader hierarchy of clock and timing ICs, frequency synthesizers, phase-locked loops, RF signal-chain ICs, and semiconductors. Integer-N operation simplifies control compared with fractional-N architectures, while the maximum RF input rate enables high-frequency local-oscillator designs when the VCO and loop bandwidth are suitable. The ADF4113BRU supports RF synthesis up to 4.0 GHz and includes programmable dual-modulus prescaling, programmable charge-pump currents, a separate charge-pump supply, and a programmable reference divider. The family documentation also identifies 3 V system operation. Separate charge-pump supply capability allows extended tuning-voltage headroom, which is useful when the external VCO requires a tuning range beyond the main supply rail. The programmable charge-pump current provides another control point for loop dynamics and reference-spur trade-offs. The internal signal path uses a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, A and B counters, and P/P+1 dual-modulus prescaler. This arrangement is intended for integer-N local oscillators in RF upconversion and downconversion paths. The 16-TSSOP body is 4.40 mm wide and corresponds to the 0.173-inch package description listed by DigiKey. Package, lead finish, and orderable suffix must be checked against the Analog Devices ordering guide before substituting an alternative. Typical uses include GSM and other wireless receiver or transmitter local oscillators, RF upconversion and downconversion blocks, communications test equipment, and frequency-generation subsystems. In such systems, the reference divider can reduce a high-frequency reference before comparison with the divided VCO output. The A counter, B counter, and dual-modulus prescaler determine the integer multiplication relationship, while the charge pump and external loop filter translate phase error into VCO tuning voltage. The principal design constraint is loop stability. Component values for the charge-pump, loop filter, and VCO must be derived for the actual reference frequency, target output frequency, prescaler, phase margin, and tuning range. RF routing also requires short, controlled-impedance paths, solid return planes, and careful separation between sensitive synthesizer inputs and high-energy clock or switching nodes. The ADF4113 datasheet family should be consulted for the complete pin table and application circuit. This product record combines verified manufacturer and distributor information with a focused comparison of same-package options, practical loop-filter and layout guidance, and commercial availability context. It is intended to help engineers confirm footprint, frequency capability, programming architecture, and source-document status before committing a PLL design to layout or production.

RFQ پەیوەندی
ADF4113BRUZ - 4GHz Integer-N RF PLL | Analog Devices
ADF4113BRUZ

ADF4113BRUZ - 4GHz Integer-N RF PLL | Analog Devices

The Analog Devices ADF4113BRUZ is a single-channel, integer-N RF phase-locked-loop frequency synthesizer rated to 4 GHz and packaged in a 16-pin TSSOP with a 4.40 mm body width. It generates programmable local-oscillator or clock frequencies for wireless transmitters and receivers by combining a programmable prescaler, integer-N frequency dividers, a phase-frequency detector, a charge pump, and a reference-divider stage in one RF synthesizer package. An RF PLL is a closed-loop timing circuit used to create a stable, programmable output frequency from a reference source. The phase-frequency detector compares the divided output with the divided reference, while the charge pump converts phase error into a control voltage for an external voltage-controlled oscillator. In system terms, the ADF4113BRUZ belongs to the hierarchy of clock and timing ICs, frequency synthesizers, RF synthesizers, and phase-locked loops used for local-oscillator generation. Key features include integer-N frequency synthesis, operation up to 4 GHz, and a programmable prescaler and charge-pump arrangement. The device is intended for RF local-oscillator generation in wireless receivers and transmitters. Its 16-pin TSSOP package is relatively compact for an RF synthesizer, but correct implementation still requires an external crystal or reference oscillator, loop-filter components, and a VCO or externally supplied RF feedback path. The synthesizer architecture supports programmable A and B counters, a dual-modulus P/P+1 prescaler, a programmable reference divider, a low-noise digital phase-frequency detector, and a precision charge pump. These functional blocks allow the output frequency to be set by integer division ratios while the closed feedback loop corrects phase and frequency errors. The exact counter ranges, minimum channel spacing, reference-input conditions, and lock-time behavior should be confirmed against the manufacturer datasheet before final loop design. Typical applications include GSM and wireless local oscillators, radio receiver and transmitter down-converters and up-converters, RF test equipment, and frequency-generation modules. The integer-N architecture is particularly useful where channel spacing and integer divider ratios align with the required output frequencies. A fractional-N synthesizer may be more appropriate when non-integer channel spacing or finer resolution is required. The principal design consideration is the complete reference, filter, and VCO chain. The charge-pump current, loop-filter resistance and capacitance, reference frequency, prescaler, and N-counter values jointly determine phase noise, lock time, spur performance, and reference-divider spur levels. Follow the manufacturer’s loop-filter example and PCB layout guidance, and keep RF feedback routing short and controlled. This product page combines the ADF4113BRUZ ordering information, a 4 GHz parameter summary, same-package replacement candidates, application guidance, and implementation-focused design notes. These resources support initial part selection and board planning while the manufacturer datasheet remains the controlling reference for ratings, pin functions, register behavior, and final circuit values.

RFQ پەیوەندی
ADF4113HVBCPZ - 4GHz, 15V PLL Synthesizer | Analog Devices
ADF4113HVBCPZ

ADF4113HVBCPZ - 4GHz, 15V PLL Synthesizer | Analog Devices

The Analog Devices ADF4113HVBCPZ is an integer-N frequency synthesizer with a 4 GHz maximum synthesizer frequency, a high-voltage 15 V charge pump, and a 20-lead WFQFN exposed-pad package. It is designed for voltage-controlled oscillators whose tuning voltage can reach 15 V. The device is recommended by Analog Devices for new designs. A PLL frequency synthesizer belongs to the clock-and-timing IC category and generates a controllable output frequency by comparing a reference signal with a divided feedback signal. The phase-frequency detector and charge pump drive an external voltage-controlled oscillator, while a programmable loop filter converts the charge-pump output into the VCO tuning voltage. An integer-N architecture provides straightforward frequency synthesis without fractional-N interpolation. The principal feature of the ADF4113HV is its 15 V charge pump. Unlike a conventional charge-pump synthesizer intended mainly for low-voltage VCOs, this implementation can support tuning voltages up to 15 V and may operate with a passive loop filter. The 4 GHz operating ceiling supports RF and microwave synthesis requirements, while the integrated programming architecture permits divider and counter settings to be configured by the host controller. The ADF4113HV architecture includes a low-noise digital phase-frequency detector, a precision charge pump, a programmable reference divider, programmable A and B counters, and a dual-modulus prescaler. These blocks form the feedback and tuning loop around an external VCO. The high-voltage pump is particularly relevant where the VCO requires a substantially higher tuning range than the synthesizer's digital and analog supply rails. Typical uses include wireless receiver and transmitter local oscillators, microwave up-converters and down-converters, high-tuning-range VCOs, instrumentation, and industrial RF systems. The device can also serve as the frequency-setting element in closed-loop RF systems where phase noise, lock behavior, and tuning-voltage headroom determine usable signal quality. A critical design consideration is the external loop filter. Its resistance, capacitance, charge-pump current, and VCO gain must be selected together to provide adequate lock range and stable phase margin without excessive ringing. PCB grounding and decoupling also affect reference noise and charge-pump behavior, so the exposed pad should be connected to the ground plane using a thermal and electrical via arrangement consistent with the package guidance. This page combines the manufacturer's high-voltage PLL positioning with package-level information, sourcing guidance, verified design context, and careful selection criteria. It is intended to help engineers distinguish the ADF4113HV from standard ADF4113 variants, identify the correct 20-pin footprint, and assess whether its 15 V charge-pump capability matches the tuning requirements of the intended VCO.

RFQ پەیوەندی
ADF4116BRUZ - 550 MHz Integer-N PLL | Analog Devices
ADF4116BRUZ

ADF4116BRUZ - 550 MHz Integer-N PLL | Analog Devices

The Analog Devices ADF4116BRUZ is a single-channel, integer-N radio-frequency phase-locked loop frequency synthesizer with a maximum output frequency of 550 MHz, supplied in a 16-pin TSSOP package. It combines a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, programmable A and B counters, and a dual-modulus prescaler for programmable RF clock and local-oscillator generation. An RF PLL frequency synthesizer is a clock-and-timing IC that locks an output phase to a reference frequency. Within the broader semiconductor hierarchy, the ADF4116 belongs to the clock and timing family and supports applications that require stable, programmable RF frequencies for wireless receiver and transmitter signal chains. The ADF4116 operates from a 5.5 V supply and includes a separate charge-pump supply arrangement for extended tuning-voltage capability. It supports 3 V systems, uses an external reference, and provides an external CMOS clock input and clock output. Its architecture permits integer-N frequency planning using the programmable reference divider, A counter, B counter, and dual-modulus prescaler. At an RF output frequency of up to 550 MHz, the device can generate local-oscillator signals for wireless upconversion and downconversion sections. The manufacturer identifies ADF4116, ADF4117, and ADF4118 as a related family with maximum frequencies of 550 MHz, 1.2 GHz, and 3.0 GHz, respectively; the higher-frequency members also support separate tuning-voltage operation. Typical uses include wireless receiver and transmitter local oscillators, RF signal-generation systems, test and measurement equipment, and frequency conversion stages in communications equipment. Designers must select the reference frequency, prescaler, counter values, charge-pump current, and loop-filter components to meet the required output range and phase-noise performance. A key design consideration is loop-filter tuning because it directly affects lock behavior, phase noise, and reference-spur performance. The charge-pump output drives the external loop filter, and the available tuning voltage must remain within both the RF-VCO and ADF4116 charge-pump constraints. This product page consolidates verified manufacturer specifications, distributor pricing, lifecycle information, and same-package replacement analysis. It also distinguishes a documented legacy variant from reel-format order codes so engineers can make a pin-compatible sourcing decision without treating packaging-only variants as separate drop-in alternatives.

RFQ پەیوەندی