بەرهەمەکان (46,000+)

AD532KDZ - 4-Quadrant IC Multiplier/Divider | Analog Devices
AD532KDZ

AD532KDZ - 4-Quadrant IC Multiplier/Divider | Analog Devices

The Analog Devices AD532KDZ is an internally trimmed, monolithic integrated circuit multiplier/divider in a 14-pin ceramic dual-in-line (TO-116) package, used for multiplication, division, squaring, square-rooting and algebraic computation. It operates from a +10 V to +18 V single supply and draws about 6 mA of operating supply current, with a rated slew rate of 45 V/us and RoHS-compliant gold-plated contacts. An analog multiplier/divider is a signal-processing IC that computes the product of two analog input voltages. Unlike a digital multiplier running on a microcontroller, it resolves the multiplication continuously, in real time, and at analog signal-chain speed, so it can modulate, demodulate, control, or compute without an ADC/DAC round trip. In the product-type hierarchy, AD532KDZ sits as an analog multiplier/divider, which is a functional subclass of analog signal-processing IC and amplifier IC. Key features of the AD532KDZ include four-quadrant operation, on-chip trim that eliminates external trim potentiometers and resistors, and K-grade accuracy. The device accepts bipolar inputs and produces scaled analog outputs, making it useful where an analog computation replaces a cascade of op-amps, multipliers, and dividers. Because trimming is internal, temperature and long-term drift stay tighter than a discrete multiplier network, and board area is reduced compared with discrete implementations. Technically, the AD532 is built around a Gilbert-style multiplier core with a differential input stage, a precision reference and trimming network, and output amplifiers that scale the product by the external scale-factor resistor and reference voltage. The AD532KDZ is specified over a supply range of 10 V to 18 V, which suits classic +/-15 V bench and legacy industrial analog systems. Analog Devices lists the AD532 as NOT RECOMMENDED FOR NEW DESIGNS, so it is best used for repair, maintenance, and legacy instrument support rather than new platform development. Typical applications include analog computation blocks in process control, aircraft and navigation test equipment, servo multipliers, and instrumentation where analog algebra is required. A single AD532KDZ can replace several precision op-amps and associated trim networks, reducing component count and drift in the analog path. A key design consideration is that the AD532KDZ is a legacy hermetic-style ceramic DIP part supplied in a through-hole 14-pin footprint, so PCB layout must accommodate 0.300 in pin pitch and adequate clearance for the larger ceramic body. Because the part is not recommended for new designs, verify the accuracy grade, supply rails, and reference components against the manufacturer datasheet before committing a design, and use the Request a Quote form on this page for availability and lead time. This page combines lifecycle status, supply and packaging detail, drop-in alternative options, and practical design notes that are not consolidated on a simple distributor listing, helping engineers sustain legacy analog designs and plan orderly migration to current multiplier products.

RFQ پەیوەندی
AD532KHZ - 4-Bit, 1 MHz Analog Multiplier | Analog Devices
AD532KHZ

AD532KHZ - 4-Bit, 1 MHz Analog Multiplier | Analog Devices

The Analog Devices AD532KHZ is an internally trimmed, 4-quadrant analog multiplier/divider with 1 MHz bandwidth, packaged in a hermetically sealed 10-pin TO-100 metal can. It performs multiplication and division of analog signals through balanced, precision-matched circuitry. The four-quadrant architecture supports operation across both input polarities, making the device useful in modulation, control, signal-conditioning, analog-computation, and instrumentation systems. An analog multiplier is a specialized amplifier or integrated circuit that produces an output proportional to the product of two input voltages. Its functional hierarchy extends from analog multiplier to analog computing IC, signal-processing IC, and integrated circuit. A divider operation can be implemented by placing a resistor in the feedback path of the multiplier, allowing one input to establish a scaling ratio while the other supplies the signal being scaled. The AD532KHZ combines a 4-bit resolution classification with 1 MHz bandwidth and internal trimming. Internal trimming reduces the need for external calibration of multiplier accuracy, while the hermetic TO-100-10 package supports operation in demanding industrial and legacy instrumentation environments. Its primary electrical characteristics are specified in the Analog Devices manufacturer datasheet, including gain accuracy, linearity, bandwidth, supply requirements, input ranges, and temperature behavior. Analog Devices identifies AD532 as not recommended for new designs, so the part should be selected primarily for repair, continuation, or redesign of an existing AD532-based circuit. Hermetic packaging and stable multiplication characteristics remain valuable where an established circuit footprint, test methodology, or qualified supply chain is required. Before replacing the device, verify the original grade suffix, operating temperature range, supply voltage, pin orientation, and external resistor network. Typical uses include four-quadrant multipliers in analog control loops, precision dividers in feedback networks, amplitude-control circuits, synchronous demodulation stages, and laboratory instrumentation. The 1 MHz bandwidth supports signal chains operating well above audio frequency, although practical system bandwidth also depends on the external resistor network, source impedance, load, and compensation or trimming components. The primary design consideration is to reproduce the original application circuit rather than redesign around generic equations. Maintain the manufacturer-specified bypass capacitors, resistor tolerances, pin connections, and grounding arrangement. The TO-100 package requires adequate lead-bend clearance and PCB spacing, and its thermal performance depends on the board-level copper area and airflow. This page combines the device identity, package information, lifecycle status, verified source links, drop-in candidates, and engineering guidance needed to evaluate the AD532KHZ for maintenance and controlled redesign applications.

RFQ پەیوەندی
AD534JDZ - Precision 4-Quadrant Multiplier | Analog Devices
AD534JDZ

AD534JDZ - Precision 4-Quadrant Multiplier | Analog Devices

The Analog Devices AD534JDZ is a production, internally trimmed precision IC multiplier and divider with four-quadrant operation, programmable gain and scale factor, and built-in voltage-division and reciprocal functions. The AD534JDZ is packaged in a 14-pin ceramic dual-inline package and is identified by Analog Devices as the RoHS-compliant, lead-free counterpart of the AD534JD. Its monolithic construction combines an internal reference, laser-trimmed scaling elements, and a high-gain output stage in one analog signal-processing device. An analog multiplier is an integrated circuit that computes the product of two voltage signals. When one input is held at a constant reference, the same circuit can also perform division, reciprocal calculation, gain control, and voltage scaling. In the AD534, an on-chip buried Zener reference and laser trimming establish an overall scale factor of 10 V. The difference between the XY/SF and Z signals is then applied to the high-gain output amplifier, allowing the product or division result to be referenced accurately to the internal reference. The AD534 family supports four-quadrant operation, meaning multiplication can handle input signals that change polarity rather than being limited to one positive and one negative quadrant. This makes the device useful in analog signal-processing systems where both polarities carry information. Its built-in voltage-division and reciprocal operations reduce the number of external arithmetic networks required for control, instrumentation, and feedback calculations. Programming the gain and scale factor allows a system designer to adapt the AD534 to different signal ranges. In an analog-computer or control loop, the multiplier can combine a command variable with a feedback variable. In measurement systems, it can provide analog scaling between sensor outputs and downstream converter inputs. The internal reference also reduces the need for an external precision reference when the circuit operates around the AD534's calibrated scale factor. The AD534JDZ is offered in a 14-pin CDIP package for through-hole industrial and instrumentation assemblies. Analog Devices describes the family as internally trimmed precision IC multiplier/divider technology, using laser trimming to achieve stable scale-factor performance. The device is intended for analog computation, control, feedback, signal-processing, and precision instrumentation circuits rather than high-speed digital conversion. When designing around the AD534JDZ, check the complete pin description, recommended input and output ranges, bandwidth, scale-factor error, and supply limits in the Analog Devices AD534 datasheet. Resistor and trim networks should be arranged to minimize parasitic resistance and thermal gradients because multiplier accuracy depends on matched scaling paths and stable references. Stable bypass and grounding practices are also important when the output drives sensitive measurement or control circuitry. This page consolidates the exact AD534JDZ package, production status, functional characteristics, verified RoHS and lead-free information, drop-in candidates, application guidance, and engineering comparison notes. It is designed to help engineers identify the correct multiplier, understand its four-quadrant operation, and plan a compatible replacement before placing an order through the XAIPART Request a Quote form.

RFQ پەیوەندی
AD534KDZ - 4-Quadrant Precision Multiplier | Analog Devices
AD534KDZ

AD534KDZ - 4-Quadrant Precision Multiplier | Analog Devices

The Analog Devices AD534KDZ is an internally trimmed, monolithic four-quadrant multiplier/divider packaged in a 14-pin ceramic DIP. It accepts analog input signals and performs multiplication or division functions for precision control, measurement, and signal-processing systems. The device is specified as a precision analog multiplier with laser-trimmed calibration, combining a four-quadrant operating capability with an accurate, stable analog signal path. Its 14-CDIP package measures 0.300 inch, or 7.62 mm, across the body. An analog multiplier is a specialized analog-function integrated circuit that scales one input signal by another. Multiplication is common in gain control, signal normalization, modulation, automatic-range measurement, and closed-loop industrial control. A four-quadrant multiplier can multiply positive and negative input combinations, while the divider configuration supports precision ratio calculations. Within the broader semiconductor hierarchy, the AD534 is an analog signal-processing IC, a multiplier/divider, and ultimately an amplifier-class integrated circuit used to condition and control continuous-valued signals. Key device attributes include four-quadrant operation, monolithic construction, internal laser trimming, and a 14-CDIP package. Internal trimming calibrates the multiplier during manufacture, improving consistency between units and reducing the need for external adjustment. The monolithic implementation also keeps the multiplier and associated circuitry on one semiconductor die, supporting repeatable performance in analog instrumentation designs. ADI identifies the AD534 family as production products and describes it as an internally trimmed precision IC multiplier/divider. The AD534's architecture makes it useful where a computed analog quantity must be produced directly rather than implemented with a sequence of discrete op-amp stages. Compared with a digital multiplication approach, an analog multiplier can operate on continuously varying signals without first converting them into digital words. This reduces conversion latency and avoids quantization error, although the surrounding system must still manage offsets, temperature effects, reference accuracy, and downstream signal scaling. Typical applications include precision gain and attenuation control, laboratory and test instrumentation, process-control loops, analog signal normalization, modulation and demodulation blocks, and measurement systems that multiply a sensed quantity by a calibration factor. In an instrumentation design, the AD534 can scale a bridge or sensor output by a programmable control voltage, while in a divider configuration it can generate a proportional ratio for feedback or measurement stages. When laying out the board, treat the analog inputs, reference path, and output as a matched precision network. Keep sensitive signal traces short, avoid sharing return-current paths with switching circuitry, and use stable bypass capacitance at the device pins. Confirm the complete pin assignments and recommended operating conditions in the manufacturer data sheet before final routing, especially when the multiplier operates near its input or output limits.

RFQ پەیوەندی
AD534KHZ - 4-Quadrant Multiplier/Divider | Analog Devices
AD534KHZ

AD534KHZ - 4-Quadrant Multiplier/Divider | Analog Devices

Analog Devices AD534KHZ is a precision four-quadrant analog multiplier/divider built with monolithic, laser-trimmed construction and housed in a 10-lead TO-100 metal-can package. The device combines a multiplier/divider function with internally trimmed accuracy, low output noise of 90 µVrms over 10 Hz to 10 kHz, excellent supply rejection, low temperature coefficients, and strong long-term stability. It is intended for instrumentation and analog signal-processing systems that require accurate product or quotient calculations. An analog multiplier is an integrated circuit that multiplies two voltage signals, while an analog divider divides one signal by another. A four-quadrant multiplier can process positive and negative inputs, allowing it to support control-system modulation, signal calibration, RMS measurement, modulation, demodulation, feedback compensation, and precision analog computation. The AD534 belongs to the broader analog IC and amplifier hierarchy, combining signal conditioning and mathematical computation in one device. The AD534KHZ uses monolithic laser trimming to establish its internal calibration. This construction is relevant because trimming minimizes the need for external adjustment and supports repeatable performance across production units. Its documented output-noise performance of 90 µVrms from 10 Hz to 10 kHz is suitable for systems in which multiplier noise contributes directly to the accuracy of the calculated result. Excellent supply rejection helps preserve accuracy when the operating supply changes. Low temperature coefficients and excellent long-term stability are important in precision measurement systems because analog gain and offset errors can drift with environmental changes and component aging. The TO-100-10 package provides through-hole construction, mechanical robustness, and useful thermal mass compared with many small surface-mount packages. The metal enclosure also provides environmental shielding around the sensitive analog circuitry and can assist with heat dissipation. Typical uses include closed-loop control, analog signal calculation, precision test equipment, laboratory instrumentation, feedback-loop compensation, and modulation or demodulation circuits. Because the AD534 supports four-quadrant operation, bipolar control signals can be processed without requiring the system designer to split every calculation into separate positive and negative paths. The device is also suitable for gain-control and transducer-signal-conditioning arrangements where scaling accuracy is important. When implementing the AD534KHZ, follow the manufacturer datasheet for the complete pin description, input and output ranges, supply limits, bandwidth, settling behavior, and external component requirements. Keep sensitive input and output routing short, maintain the recommended bypass capacitance, and avoid unnecessary loading around the multiplier terminals. Confirm stability over the complete input, output, load, and temperature range of the intended system before production release. This page combines the verified AD534KHZ product identity, pricing context, package information, same-family alternatives, technical comparisons, and practical selection guidance. It supports engineers who need a precise four-quadrant multiplier/divider in a robust TO-100-10 package while keeping procurement and design decisions in one technical reference.

RFQ پەیوەندی
AD534LDZ - Precision 4-Quadrant Multiplier | Analog Devices
AD534LDZ

AD534LDZ - Precision 4-Quadrant Multiplier | Analog Devices

The Analog Devices AD534LDZ is an internally trimmed, monolithic precision four-quadrant multiplier/divider in a 14-CDIP package. It accepts bipolar analog input signals, supports multiplication and division across all four input quadrants, and uses laser trimming with an overall scale factor of 10 V. The AD534LDZ is intended for precision analog signal processing where accurate multiplication, division, scaling, modulation, and signal-level control are required. An analog multiplier is an integrated circuit that produces an output proportional to the product of two input voltages. A four-quadrant multiplier can process positive and negative inputs while retaining the correct output polarity. In signal-processing systems, this device belongs to the multiplier/divider class, which extends to analog computation, instrumentation, control, and measurement. Its monolithic construction combines the multiplier core, reference elements, trimming network, and output amplifier in one package. The AD534 family uses laser trimming to establish an overall scale factor of 10 V. According to the Analog Devices AD534 datasheet, an on-chip buried Zener supplies a stable reference that supports the trimming system. The result is a precision multiplier/divider with internally corrected scale-factor accuracy, supply rejection, low temperature coefficients, and long-term stability. These characteristics make the device suitable for analog control systems in which multiplier error directly influences system gain. A four-quadrant implementation permits both polarities without external sign-detection circuitry. This simplifies instrumentation using differential or bipolar sensor signals, particularly when the second input can also change polarity. Division is obtained by placing the denominator signal on the appropriate multiplier input. Careful reference and feedback design remains necessary because practical accuracy depends on signal range, denominator magnitude, supply conditions, trimming, and the precision of external resistors. Typical uses include precision test and measurement equipment, industrial process-control loops, laboratory signal conditioning, analog computation modules, closed-loop control, and four-quadrant signal modulation. The AD534LDZ is particularly appropriate when a system requires multiplication or division accuracy beyond a general-purpose analog multiplier and can accommodate a 14-CDIP through-hole package. Designers should preserve the required supply range and observe the pin-description table in the manufacturer datasheet when assigning input, output, reference, and supply connections. Signal amplitudes must remain within the operating limits for the selected accuracy grade. External resistor matching and temperature compensation may be necessary when the highest multiplier or divider accuracy is required. This page combines the exact package and production information, documented multiplier characteristics, practical application guidance, parameter comparisons, and sourcing options for engineers evaluating the AD534LDZ as a precision analog signal-processing component.

RFQ پەیوەندی
AD534LHZ - Precision 4-Quadrant Multiplier | Analog Devices
AD534LHZ

AD534LHZ - Precision 4-Quadrant Multiplier | Analog Devices

The Analog Devices AD534LHZ is a laser-trimmed, monolithic four-quadrant analog multiplier/divider with a 10-lead TO-100-10 package, a ±22 V operating supply range, and operation from -55 °C to +125 °C. It is designed for precision signal-processing systems that require multiplication or division of two analog signals while maintaining low noise and excellent long-term stability. The device also provides an active input and a trim function for applications requiring additional calibration. An analog multiplier/divider belongs to the precision signal-processing IC hierarchy, where it combines with operational amplifiers, references, and data-conversion devices to implement control, measurement, modulation, and signal-conditioning functions. Unlike a digital multiplier, the AD534LHZ operates directly on continuous analog waveforms without requiring conversion, serialization, or arithmetic processing. This makes it useful when bandwidth, signal phase, and low added noise matter more than programmability. The AD534 uses laser trimming to establish accurate scale-factor and symmetry characteristics. Analog Devices describes the product as a low-noise monolithic construction with 90 µV rms noise from 10 Hz to 10 kHz. Its four-quadrant operation allows either input polarity combination, supporting multiplication, division, RMS-related functions, modulation, and feedback-control applications. The manufacturer identifies the AD534 family as production devices, with the AD534LHZ offered in a 10-pin TO-100 package and tube packing. Technical performance depends on signal amplitude, frequency, supply voltage, load, external compensation, and the configuration of the surrounding operational amplifiers. Because the multiplier operates over a broad ±22 V supply range, its internal dynamic range and output behavior require careful reference selection and gain planning. For highest accuracy, designers should use stable reference and feedback networks, maintain appropriate input and output signal levels, and account for temperature drift when setting system calibration limits. Typical uses include precision closed-loop control, analog computation, instrumentation, programmable gain and signal conditioning, modulation, and measurement systems. The AD534LHZ can also support laboratory reference designs where a fixed four-quadrant multiplier is preferable to a digitally controlled multiplier. In industrial equipment, the wide temperature range can be valuable when the analog signal path must remain close to the sensing or actuation stage. The principal layout concern is sensitive analog routing. Keep multiplier inputs and feedback nodes away from switching-power nodes, use short grounded guarding around high-impedance inputs, and provide a stable low-noise supply. Check the complete manufacturer datasheet for pin functions, recommended application circuits, compensation values, and operating limits before fixing the PCB layout. This page combines package, temperature, electrical, sourcing, and application guidance with same-family drop-in alternatives, a parameter comparison, and practical design notes. It helps engineers identify the correct AD534 package option and plan a precision analog signal chain without conflating temperature-grade differences with functional compatibility.

RFQ پەیوەندی
AD53508JP - Dual-Channel 15.75V PMU IC | Analog Devices
AD53508JP

AD53508JP - Dual-Channel 15.75V PMU IC | Analog Devices

The Analog Devices AD53508JP is a dual-channel parametric measurement unit (PMU) integrated circuit designed for semiconductor automatic test equipment. It combines two independently programmable measurement channels, a 4.75 V to 15.75 V supply range, and a 44-pin PLCC package measuring approximately 16.59 mm by 16.59 mm. Each channel can force a voltage while measuring current, force a current while measuring voltage, or integrate and hold a current value. A parametric measurement unit is a specialized interface IC that connects an automated test system with a device under test. Within the test-system hierarchy, it sits between the tester controller and the DUT pin, converting force commands into analog outputs and returning measured current or voltage as feedback. The AD53508JP therefore functions as an interface circuit, measurement circuit, and precision driver within automatic test equipment. Two measurement channels allow a tester to control or monitor two DUT pins in parallel. The device supports direct measurement of higher currents, while integration provides low-noise, high-accuracy measurement for very small currents. Programmable operating modes let the same channel perform force-and-measure functions, integrate a current value, or hold a measured result, reducing the need for separate external instrumentation paths. The AD53508JP includes remote force and sense capability, allowing the measurement function to operate at the tester pin rather than only at the instrument connection point. This arrangement helps compensate for voltage drops in force and sense wiring, improving measurement accuracy where long test leads, socket contacts, or tester-board routing create meaningful resistance. Typical uses include semiconductor ATE pin-parameter characterization, parametric process monitoring, leakage-current tests, force-and-measure bias applications, and board-level semiconductor validation. The dual-channel architecture is particularly useful for parallel measurements and controlled power-delivery tests where each DUT pin requires independently programmed forcing and sensing. The primary design consideration is low-noise force-and-measure performance. Keep force and sense routing separated, use a low-noise analog ground strategy, and follow the manufacturer’s recommended bypass and layout practices. Confirm pin functions and the 44-pin PLCC footprint against the AD53508 datasheet before making PCB or fixture assignments. This product page combines the manufacturer’s device description with package details, sourcing guidance, application analysis, and a strict assessment of replacement options. It distinguishes electrically equivalent same-family variants from mere packaging references so engineers can make board-level replacement decisions without assuming that a similar-looking catalog entry is automatically drop-in compatible.

RFQ پەیوەندی
AD536ASE - True RMS-to-DC Converter, 0.09 MHz | Analog Devices
AD536ASE

AD536ASE - True RMS-to-DC Converter, 0.09 MHz | Analog Devices

The Analog Devices AD536ASE is a true RMS-to-DC converter with an operating frequency of 0.09 MHz, a 125 V maximum input rating, and a hermetically sealed 20-pin ceramic leaded chip carrier package. It converts complex AC or AC-plus-DC waveforms into an equivalent DC voltage representing the true root-mean-square value. Unlike an average rectifier, true RMS measurement responds consistently to the heating effect and power content of waveforms whose crest factor changes over time. A true RMS-to-DC converter is a specialized analog signal-conditioning device within the broader RMS measurement, converter, and power-management IC hierarchy. It measures the energy-equivalent amplitude of a waveform rather than its average value. This distinction matters in industrial instrumentation, audio and communication systems, motor control, laboratory equipment, and power monitoring, where sinusoidal signals, pulse trains, and mixed-frequency waveforms must be measured with consistent scaling. The AD536A family uses a laser-trimmed monolithic architecture to deliver specified conversion accuracy. Device grades provide different maximum error limits, including 0.2% for AD536AJ and 0.5% for AD536AK, allowing the system designer to select an accuracy grade appropriate for the measurement requirement. The AD536ASE is identified in the product documentation as a hermetically sealed LCC-20 device, making the package option suitable for applications that require a sealed ceramic package. The AD536A computes the true RMS value of complex AC signals or signals containing a DC component and converts that result into a proportional DC output. The available comparison information identifies a 125 V input rating, approximately 2000 uA supply current, and 2300 kHz bandwidth for the AD536A family. These characteristics position it for precision analog measurement rather than high-speed signal capture or waveform reconstruction. Typical uses include AC voltage measurement in industrial panels, RMS monitoring in power supplies, audio-programme level detection, motor-drive feedback, and laboratory instrumentation. Its sealed ceramic package can also support equipment intended for harsh environments when the complete assembly, solder joints, contamination control, and thermal design satisfy the manufacturer's application requirements. When designing the AD536ASE, follow the manufacturer's application circuit and pin-description table for input scaling, output filtering, supply bypassing, and grounding. The input and output networks directly influence accuracy and settling behavior, so component tolerances and layout should be treated as part of the measurement system rather than as incidental supporting parts. This product record combines the manufacturer specifications, package identification, pricing references, comparison criteria, and engineering guidance needed to evaluate the AD536ASE as a true RMS measurement front end. It also distinguishes true drop-in family options from mechanically different package variants so that replacement decisions remain based on verified electrical and pin compatibility.

RFQ پەیوەندی
AD5372BSTZ - 32-Channel 16-Bit Serial DAC | Analog Devices
AD5372BSTZ

AD5372BSTZ - 32-Channel 16-Bit Serial DAC | Analog Devices

The AD5372BSTZ is a 32-channel, 16-bit digital-to-analog converter (DAC) from Analog Devices, housed in a 64-lead LQFP package. It provides buffered voltage outputs with a nominal span of 4× the reference voltage, making it ideal for precision multi-channel control systems. The device features a serial interface, independent gain and offset trim for each DAC, and operates over a wide temperature range. A digital-to-analog converter (DAC) is an electronic component that converts digital binary data into an analog voltage or current. The AD5372BSTZ belongs to the family of voltage-output DACs, which are essential in applications requiring precise analog control from digital systems, such as industrial automation, instrumentation, and communication systems. As a multi-channel DAC, it integrates 32 individual converters in a single package, reducing board space and simplifying system design. Key features of the AD5372BSTZ include 16-bit resolution, 32 independent DAC channels, and a serial interface compatible with SPI/QSPI/MICROWIRE. Each DAC has a buffered output capable of driving loads directly, and the gain and offset of each channel can be independently trimmed to remove system errors. The device operates from a single 2.5V to 5.5V supply, with a reference voltage range of 2V to 5V, and provides a nominal output span of 4× VREF. The AD5372BSTZ uses a resistor-string architecture with an output buffer for each channel, ensuring monotonicity and low glitch energy. The serial interface supports daisy-chaining, allowing multiple devices to be controlled with a single data line. The device includes a power-on reset that clears all DAC registers to zero-scale, and a CLR pin that resets outputs to zero-scale or midscale. The LQFP package provides good thermal performance and is suitable for surface-mount assembly. Typical applications include automatic test equipment (ATE), optical network control, instrumentation, and industrial process control. The 32 channels and 16-bit resolution make it suitable for systems requiring many precise analog outputs, such as multi-axis positioning, programmable voltage sources, and calibration equipment. When designing with the AD5372BSTZ, ensure adequate decoupling on the AVDD and DVDD supplies, and place the reference decoupling capacitor close to the REFIN pin. The serial clock frequency should be limited to 50 MHz to ensure reliable communication, and the SYNC pin must be held low during data transfer.

RFQ پەیوەندی
AD5381BSTZ-3 - 40-Channel 12-Bit DAC | Analog Devices
AD5381BSTZ-3

AD5381BSTZ-3 - 40-Channel 12-Bit DAC | Analog Devices

The AD5381BSTZ-3 is a complete, single-supply, 40-channel, 12-bit digital-to-analog converter (DAC) from Analog Devices, packaged in a 100-lead LQFP (14x14 mm). It operates from a 3 V single supply and includes an on-chip output amplifier with rail-to-rail operation on all 40 channels. The device features a programmable internal reference (1.25 V default, 2.5 V optional via control register), an on-chip channel monitor that multiplexes outputs to a common MON_OUT pin, and a flexible serial interface (DSP-/SPI-/MICROWIRE-compatible) or parallel interface. The AD5381BSTZ-3 is specified for the industrial temperature range (-40°C to +85°C) and is RoHS compliant. A digital-to-analog converter (DAC) is an electronic component that converts digital binary data into an analog voltage or current. In the hierarchy of signal processing, a DAC is a key element in the data converter family, which also includes analog-to-digital converters (ADCs). DACs are essential in systems where digital processing must interface with the analog world, such as in audio playback, motor control, and instrumentation. The AD5381 is a dense DAC, integrating 40 channels in a single package, which reduces board space and simplifies multi-channel systems. Key features of the AD5381BSTZ-3 include 12-bit resolution, 40 independent output channels, a settling time of 8 µs, and a programmable internal reference with 10 ppm/°C drift. The device also offers a power-on reset to zero-scale or midscale, and a clear function to reset outputs. The rail-to-rail output amplifiers allow the outputs to swing close to the supply rails, maximizing dynamic range. The channel monitor function simplifies system diagnostics by allowing external monitoring of any channel. Technically, the AD5381 uses a resistor-string architecture with an output buffer for each channel, ensuring monotonicity and low glitch. The device supports both serial and parallel interfaces, with the SER/PAR pin selecting the mode. In serial mode, the SPI/I2C pin (Pin 97) must be tied low for SPI-compatible operation. The internal reference can be programmed to 1.25 V or 2.5 V via the control register, but operating with 2.5 V reference degrades accuracy and limits input code range, as noted in the datasheet. Typical applications include industrial process control, automated test equipment, multi-channel data acquisition systems, and precision instrumentation. The 40-channel density and 3 V operation make it ideal for systems requiring many analog outputs with minimal power consumption. The device's rail-to-rail outputs and programmable reference enhance flexibility in various voltage domains. When designing with the AD5381BSTZ-3, ensure adequate decoupling on the AVDD and DVDD supplies, and consider the reference voltage selection carefully to meet accuracy requirements. The channel monitor function can be used for system-level calibration and fault detection.

RFQ پەیوەندی
AD5381BSTZ-5 - 40-Channel 12-Bit DAC | Analog Devices
AD5381BSTZ-5

AD5381BSTZ-5 - 40-Channel 12-Bit DAC | Analog Devices

The AD5381BSTZ-5 is a complete, single-supply, 40-channel, 12-bit digital-to-analog converter (DAC) from Analog Devices, housed in a 100-lead LQFP package. It operates from a single 5V supply and includes an on-chip output amplifier with rail-to-rail operation on all 40 channels. The device features a programmable internal 1.25V/2.5V reference with 10 ppm/°C drift, an on-chip channel monitor function that multiplexes analog outputs to a common MON_OUT pin, and a power-down mode. It supports both serial (SPI, DSP, MICROWIRE) and parallel interfaces, with the SER/PAR pin selecting the mode. A digital-to-analog converter (DAC) is an electronic component that converts digital binary data into an analog voltage or current. The AD5381BSTZ-5 is a multi-channel DAC, specifically a denseDAC, designed for systems requiring many precise analog outputs from a single IC. It belongs to the data acquisition product family, which includes ADCs, DACs, and analog front ends, and is essential in industrial control, automated test equipment, and instrumentation where multiple analog voltages must be generated accurately. Key features include guaranteed monotonic INL error of ±1 LSB max, a 10 ppm/°C on-chip reference, rail-to-rail output amplifiers, and a power-down mode. The device operates over the industrial temperature range of -40°C to +85°C. The 100-lead LQFP package (14x14 mm) provides a compact footprint for high-channel-count designs. The AD5381BSTZ-5 is the 5V supply version; a 3V version (AD5381BSTZ-3) is also available. Technically, the AD5381 uses a segmented architecture with an internal reference and output amplifiers, ensuring monotonicity and low INL. The channel monitor function allows external monitoring of any channel without disturbing the output, which is valuable for system diagnostics. The serial interface supports daisy-chaining for multiple devices, and the parallel interface allows high-speed updates. The power-down mode reduces current consumption to a low level, beneficial for power-sensitive applications. Typical applications include industrial process control, automated test equipment (ATE), instrumentation, and multi-channel voltage biasing in optical modules. The 40-channel density and 12-bit resolution make it ideal for systems requiring many accurate analog outputs, such as setting bias voltages in MEMS or optical devices. The rail-to-rail output and single-supply operation simplify power supply design. When designing with the AD5381BSTZ-5, ensure proper decoupling of the AVDD and DVDD supplies with 0.1µF and 10µF capacitors close to the pins. The reference output should be buffered if driving external loads. For serial mode, tie SER/PAR high and SPI/I2C low. Verify the interface timing against the datasheet to avoid data corruption.

RFQ پەیوەندی
AD5381BSTZ-5KL2 - 40-Channel 12-Bit DAC | Analog Devices
AD5381BSTZ-5KL2

AD5381BSTZ-5KL2 - 40-Channel 12-Bit DAC | Analog Devices

The AD5381BSTZ-5KL2 is a complete, single-supply, 40-channel, 12-bit digital-to-analog converter (DAC) from Analog Devices, packaged in a 100-lead LQFP. It operates from a 5 V supply and includes an on-chip output amplifier with rail-to-rail operation on all 40 channels. The device features a programmable internal 1.25 V/2.5 V reference with 10 ppm/°C drift, an on-chip channel monitor that multiplexes outputs to a common MON_OUT pin, and a flexible digital interface supporting both parallel and serial (SPI/DSP/MICROWIRE) modes. The AD5381 is designed for precision multichannel applications such as industrial process control, automatic test equipment, and medical instrumentation. A digital-to-analog converter (DAC) is an electronic component that converts digital binary data into an analog voltage or current. The AD5381 is a denseDAC, integrating 40 DAC channels in a single package, which reduces board space and system cost compared to using multiple lower-channel-count DACs. It belongs to the family of data converters, which are essential in bridging the digital and analog domains in mixed-signal systems. The AD5381's high channel density and integrated reference make it a key component in multichannel control and calibration systems. Key features of the AD5381BSTZ-5KL2 include 12-bit resolution, 40 independent output channels, rail-to-rail output amplifiers, and a programmable reference. The device offers a settling time of 8 µs typical, ensuring fast response in dynamic applications. It also includes a power-on reset to zero-scale, ensuring safe startup conditions. The channel monitor function allows external monitoring of any channel without disturbing the output, which is valuable for system diagnostics. Technically, the AD5381 uses a segmented architecture with an internal precision reference, achieving excellent linearity and low noise. The device operates over a temperature range of -40°C to +105°C, making it suitable for industrial environments. The LQFP-100 package provides a compact footprint while allowing adequate thermal dissipation. The digital interface supports both parallel and serial modes, with the SER/PAR pin selecting the mode, and the SPI/I2C pin (Pin 97) enabling the serial interface when tied low. Typical applications include industrial process control (e.g., valve and actuator control), automatic test equipment (ATE) for precise voltage generation, and medical instrumentation such as patient monitoring systems. The AD5381's 40 channels allow it to drive multiple analog outputs simultaneously, reducing component count and improving system reliability. When designing with the AD5381, ensure proper decoupling of the AVDD and DVDD supplies with 10 µF and 0.1 µF capacitors placed close to the pins. The reference output should be buffered if external loads are connected. The MON_OUT pin can be used to monitor channel outputs, but care must be taken to avoid loading the monitored channel.

RFQ پەیوەندی
AD538ADZ - 4-Quadrant Analog Computation Unit | ADI
AD538ADZ

AD538ADZ - 4-Quadrant Analog Computation Unit | ADI

Analog Devices AD538ADZ is a monolithic real-time analog computational unit with 4-quadrant multiplication, division, and exponentiation capability, housed in an 18-pin SBDIP package. The device combines precision analog signal processing with laser wafer trimming, allowing multiplication and division errors as low as 0.25% of reading over a wide input dynamic range. An analog computational unit, or ACU, is a specialized analog integrated circuit that computes mathematical relationships directly from continuously varying electrical signals. Unlike a digital processor, it performs multiplication, division, and exponentiation in real time without converting the inputs to digital form. Within the broader hierarchy of analog multiplication ICs, divider ICs, and special-purpose signal-processing ICs, the AD538ADZ provides a compact way to implement control, measurement, modulation, and feedback functions. The AD538ADZ provides four-quadrant multiplication, supporting both positive and negative input polarities. Its monolithic construction reduces the number of separate multipliers, dividers, and surrounding operational amplifiers normally required to implement equivalent calculations. Laser wafer trimming improves production consistency and supports multiplication and division errors as low as 0.25% of reading, making the device useful where accuracy must be combined with continuous analog operation. Internally, the circuit uses analog computational techniques to calculate products, ratios, and exponential relationships directly from voltage inputs. The low input and output offset voltages help preserve accuracy near the origin, while excellent linearity extends useful performance across the operating input range. The AD538ADZ is therefore more than a general-purpose multiplier: it is a dedicated computational building block for systems where the output must vary continuously and proportionally with one or more analog inputs. Typical uses include analog servo loops, automatic-gain-control circuits, measurement and control systems, signal conditioning, modulation, demodulation, and real-time feedback calculations. It can also simplify instrumentation in which a computed analog quantity is needed before conversion by an ADC. Compared with a software-defined calculation approach, the ACU avoids conversion delay and processor overhead, although the surrounding circuit still requires careful reference, grounding, and stability design. For new designs, verify the complete pin assignment and transfer equations in the Analog Devices AD538 datasheet before layout, because the 18-pin SBDIP construction differs from common surface-mount multiplier packages. Pay particular attention to supply bypassing, analog signal routing, reference behavior, and output loading. A prototype should also verify multiplication and division error across the intended input range rather than relying on a single operating point. This page organizes the AD538ADZ product information, sourcing details, comparison points, and engineering guidance into one compact reference. It also distinguishes the validated AD538BDZ replacement from the many search results that only describe generic multiplier or cross-reference functions without confirming a pin-compatible AD538ADZ substitute.

RFQ پەیوەندی
AD538BDZ Analog Computational Unit | Analog Devices
AD538BDZ

AD538BDZ Analog Computational Unit | Analog Devices

Analog Devices AD538BDZ is a monolithic real-time Analog Computational Unit (ACU) for precision analog multiplication, division, and exponentiation, supplied in an 18-pin SBDIP package. The device is designed for instrumentation and control systems that require computational functions without a digital processor. According to the Analog Devices AD538 product description, low input and output offset voltages, excellent linearity, and laser wafer trimming enable multiplication and division errors as low as 0.25% of reading over a wide input dynamic range. An analog computational unit is a specialized analog signal-processing IC. Unlike a general-purpose operational amplifier or multiplier IC, the AD538 family combines multiplier, divider, and exponentiation functions in one monolithic circuit, simplifying precision measurement and control designs. Its architecture places computation directly in the analog signal path, allowing a sensor or measurement amplifier output to be processed without first converting the signal into a digital representation. The AD538BDZ provides a four-quadrant analog computational function and is specified as a precision analog multiplier/divider. The B-grade device is intended for applications requiring tightened accuracy specifications compared with the standard AD538ADZ grade. The result is a compact solution for analog control loops, sensor instrumentation, laboratory measurement equipment, and industrial signal-processing systems where maintaining accuracy directly in the analog domain is valuable. The monolithic construction supports consistent behavior across the operating range and avoids the need to combine several separate multiplier, divider, and precision amplifier blocks. Its low offset contribution is particularly useful when the computed result depends on small differences between input signals. The wide dynamic range also helps preserve useful accuracy when the signal being processed varies substantially in magnitude. Typical applications include ratiometric sensor measurement, tilt and position sensing, closed-loop control, programmable gain and reference calculations, laboratory instrumentation, and industrial process monitoring. In these systems, the AD538BDZ can calculate a scaled relationship between two analog voltages, support divider-based computations, or implement an exponentiation function in a feedback loop. The manufacturer documentation includes circuit examples that should be used as the starting point for signal conditioning and compensation. For a new design, confirm the required accuracy grade, supply arrangement, input and output ranges, frequency response, and thermal conditions against the manufacturer datasheet before finalizing the PCB. The SBDIP package is through-hole and is mechanically different from modern surface-mount multiplier packages, so a replacement that does not match the 18-pin footprint requires board-level redesign. This product page combines the verified manufacturer description, distributor package information, direct-replacement references, and practical selection guidance. It is intended to help engineers identify the correct AD538 family member and plan a pin-compatible upgrade without overlooking the distinction between standard and tightened accuracy grades.

RFQ پەیوەندی
AD539JDZ - 5V Dual-Channel Analog Multiplier | Analog Devices
AD539JDZ

AD539JDZ - 5V Dual-Channel Analog Multiplier | Analog Devices

The Analog Devices AD539JDZ is a dual-channel bipolar analog multiplier with two identical signal channels, Y1 and Y2, controlled by a common X input. The device operates from a 5 V supply, provides a 3 dB bandwidth of more than 60 MHz, and is packaged in a 16-lead ceramic dual in-line package designated 16-CDIP. Its two-channel architecture allows a single control signal to influence both analog signal paths while retaining matched performance between channels. An analog multiplier is a special-purpose amplifier that multiplies two input voltages and produces an output proportional to their mathematical product. Unlike a general-purpose operational amplifier, which performs linear amplification and filtering, the AD539 implements multiplication directly in its signal path. It belongs to the amplifier IC hierarchy alongside instrumentation, variable-gain, and special-purpose amplifiers, where it provides the gain-control function normally requiring several external precision components. The AD539's principal features are its matched dual-channel construction, low distortion analog multiplication, video-frequency operation, and 60 MHz-plus bandwidth. The common X control input provides linear control of gain across both channels, which is useful in balanced signal-processing systems. The AD539 product page describes excellent AC characteristics extending into the video range, supporting applications that need accurate analog gain control rather than general-purpose amplification. Internally, the device uses bipolar transistor circuitry in a differential multiplier configuration. Differential signal handling improves rejection of common-mode signals and supports balanced operation when both Y channels are used together. Its analog output is proportional to the product of the X input and the selected Y input, with the second channel available for a second product, control, or compensation function. Typical uses include dual-axis analog control, automatic gain control, modulation and demodulation support, video signal processing, measurement systems, and instrumentation requiring accurate multiplication. The identical Y1 and Y2 channels also suit designs where channel matching is valuable, such as differential excitation, quadrature signal generation, or parallel analog computations. When laying out this device, keep input and output return paths compact and preserve the symmetry between the two multiplier channels. Avoid long unprotected traces around high-impedance inputs, and follow the manufacturer pin-connection and evaluation-circuit diagrams when selecting termination and balancing networks. Ceramic DIP construction is intended for applications that value mechanical robustness, thermal stability, and long service life. This page organizes the manufacturer's device description, distributor availability records, package information, order-code alternatives, and application guidance into a single engineering reference. It also identifies which electrical ratings require confirmation from the AD539 datasheet before layout or production release.

RFQ پەیوەندی
AD539JNZ - Dual 60MHz Analog Multiplier | Analog Devices
AD539JNZ

AD539JNZ - Dual 60MHz Analog Multiplier | Analog Devices

Analog Devices AD539JNZ is a wideband, dual-channel, two-quadrant analog multiplier/divider with two identical Y signal channels, a common X control input, and a bandwidth exceeding 60 MHz. The device is packaged in a 16-pin PDIP and is intended for high-speed analog computation, gain control, modulation, and signal-processing systems. An analog multiplier is a signal-processing semiconductor that multiplies two analog voltages and produces an output proportional to their product. The AD539 belongs to the wider multiplier/divider category within analog ICs, where it provides a controlled computational function that would otherwise require several amplifiers, resistors, and precision networks. Its two matched Y channels allow one common X signal to control two analog operations simultaneously. The AD539 family emphasizes wideband ac performance, low distortion, and useful static accuracy for computational circuits. According to the Analog Devices AD539 data sheet, Revision B, the common X input provides linear control of gain, while the two identical signal channels are labeled Y1 and Y2. Its stated -3 dB bandwidth is greater than 60 MHz, making it applicable to video-frequency signal chains rather than only precision low-frequency measurement systems. The architecture supports two-quadrant operation, meaning either polarity of the control input can be used while one signal input defines the output magnitude. This makes the AD539 useful for amplitude modulation, multiplication-based automatic gain control, analog signal inversion, waveform generation, and real-time analog product computation. Its bandwidth permits the multiplier to process signals well beyond audio frequencies. Typical applications include broadband gain control in communication receivers, modulation and demodulation circuits, precision signal conditioning, laboratory analog computers, video signal processing, and closed-loop control systems. For bidirectional or full-wave applications, additional circuitry is required because the AD539 provides two-quadrant rather than four-quadrant multiplication. Layout and signal integrity are critical because high-speed analog multiplication requires short, symmetric paths and careful grounding. Keep X1, X2, Y1, and Y2 connections compact, use a solid ground plane, and place input and output compensation or termination networks where recommended by the manufacturer application guidance. Because the AD539 is not recommended for new designs, engineers should evaluate its technical suitability carefully when supporting legacy equipment. This page combines the manufacturer product information with practical application guidance, pin-package details, drop-in family options, and engineering trade-offs. It is intended to help buyers identify the correct legacy device, verify PCB compatibility, and determine whether the AD539JNZ is suitable for a maintenance, retrofit, or specialized analog-computation design.

RFQ پەیوەندی
AD5412ACPZ - 12-Bit Current/Voltage Output DAC | Analog Devices
AD5412ACPZ

AD5412ACPZ - 12-Bit Current/Voltage Output DAC | Analog Devices

The AD5412ACPZ is a low-cost, precision, fully integrated 12-bit digital-to-analog converter (DAC) from Analog Devices that offers a programmable current source and programmable voltage output, designed to meet the requirements of industrial process control applications. It operates from a single 10.8V to 40V supply and provides a current output range of 4 mA to 20 mA, 0 mA to 20 mA, or 0 mA to 24 mA, and a voltage output range of 0 V to 5 V, 0 V to 10 V, ±5 V, or ±10 V. The device is available in a 40-lead LFCSP-VQ (6x6 mm) package, designated by the 'CP' suffix, and is specified for operation over the extended industrial temperature range of -40°C to +85°C. A digital-to-analog converter (DAC) is a device that converts digital binary data into an analog voltage or current signal. The AD5412 is a precision DAC with an integrated output amplifier and reference buffer, enabling direct interface to actuators, transmitters, and other industrial control elements. It belongs to the family of smart DACs that combine digital-to-analog conversion with programmable output ranges and diagnostic features, making it a key component in programmable logic controllers (PLCs), distributed control systems (DCS), and field transmitters. Key features of the AD5412ACPZ include a 12-bit resolution with monotonicity guaranteed, a flexible serial interface compatible with SPI, QSPI, and MICROWIRE protocols, and an on-chip precision reference (2.5V) with a temperature coefficient of 10 ppm/°C. The device also includes a HART (Highway Addressable Remote Transducer) compliant interface, allowing it to be used in smart transmitters that require superimposed digital communication on the analog current loop. The output is protected against short circuits and can drive capacitive loads up to 1 µF. Technically, the AD5412 uses a segmented architecture with a precision current-steering DAC core, followed by a programmable gain amplifier and output driver. The device includes a power-on reset circuit that ensures the output is at zero-scale or mid-scale on power-up, and a clear pin that resets the output to a defined state. The digital interface supports daisy-chaining for multiple devices on a single serial bus, and the device can be configured for either current or voltage output mode via the control register. Typical applications include industrial process control, PLC analog output modules, HART transmitters, and actuator control. The AD5412's ability to provide both current and voltage outputs with high accuracy and low drift makes it ideal for driving valves, positioners, and other field devices. Its HART compatibility enables seamless integration into existing 4-20 mA loop infrastructure. When designing with the AD5412ACPZ, ensure that the supply voltage is adequately decoupled with a 10 µF tantalum capacitor and a 0.1 µF ceramic capacitor placed close to the AVDD and DVDD pins. The reference output should be buffered if external loads are connected, and the output amplifier's stability should be verified with the expected capacitive load. For best performance, use a clean analog ground plane and separate digital and analog supply traces.

RFQ پەیوەندی
AD5412ACPZ-REEL7 - 12-Bit DAC with Current/Voltage Output | ADI
AD5412ACPZ-REEL7

AD5412ACPZ-REEL7 - 12-Bit DAC with Current/Voltage Output | ADI

The AD5412ACPZ-REEL7 is a low-cost, precision, fully integrated 12-bit digital-to-analog converter (DAC) from Analog Devices, offering a programmable current source and programmable voltage output. It is designed to meet the requirements of industrial process control applications, providing a single-channel output with serial input interface. The device operates from a 40-lead LFCSP-VQ (6x6 mm) package, ensuring compactness for space-constrained designs. A digital-to-analog converter (DAC) is an electronic component that converts digital binary data into an analog voltage or current signal. The AD5412 belongs to the family of precision DACs used in industrial automation, where accurate analog output is essential for controlling actuators, valves, and transmitters. It integrates a current source and voltage output capability, making it versatile for various control loops. Key features include 12-bit resolution, a programmable current output range (typically 4-20 mA) and voltage output range (0-5 V, 0-10 V, ±5 V, ±10 V), and a serial interface compatible with SPI. The device also includes a power-on reset, ensuring the output is at a known state on power-up. Its low power consumption and wide operating temperature range (-40°C to +125°C) make it suitable for harsh industrial environments. Technically, the AD5412 uses a resistor-string architecture with an output amplifier, providing monotonic performance and low glitch energy. It includes a precision internal reference (optional external reference) and a flexible digital interface that supports daisy-chaining. The device is fully specified over the industrial temperature range, ensuring reliable operation in demanding applications. Typical applications include industrial process control, programmable logic controllers (PLCs), actuator control, and transmitter calibration. The AD5412's ability to provide both current and voltage outputs makes it ideal for interfacing with various sensors and actuators in factory automation. When designing with the AD5412, ensure proper decoupling of the power supply and reference pins. The output amplifier requires a stable supply; consider using a low-noise LDO for analog rails. Also, the thermal pad should be soldered to a large copper area for effective heat dissipation.

RFQ پەیوەندی
AD5422ACPZ - 16-Bit Current/Voltage Output DAC | Analog Devices
AD5422ACPZ

AD5422ACPZ - 16-Bit Current/Voltage Output DAC | Analog Devices

The AD5422ACPZ is a single-channel, 16-bit digital-to-analog converter (DAC) from Analog Devices, designed for industrial process control applications. It provides a programmable current source and programmable voltage output, with HART connectivity capability. The device operates from a single 10.8V to 40V supply and is available in a 40-lead LFCSP-VQ (6x6 mm) package. It features a serial interface compatible with SPI, QSPI, and MICROWIRE protocols, and includes an on-chip reference and output amplifier. A DAC (digital-to-analog converter) is an electronic component that converts digital binary data into an analog voltage or current. The AD5422 is a precision DAC that integrates a current source and voltage output, making it a complete analog output stage for industrial control systems. It belongs to the family of smart DACs that combine digital-to-analog conversion with additional features like fault detection and HART communication. Key features include 16-bit resolution, a current output range of 4 mA to 20 mA (with additional ranges), a voltage output range of 0 V to 5 V, 0 V to 10 V, ±5 V, and ±10 V, and a settling time of 10 µs. The device offers a total unadjusted error (TUE) of ±0.1% FSR, and includes a precision 5 ppm/°C internal reference. It also features a flexible serial interface, a power-on reset to zero-scale, and a fault alarm output. The AD5422 uses a segmented architecture with a precision resistor ladder and a high-speed output amplifier. It includes a programmable gain and offset, and supports HART signal modulation for smart transmitter applications. The device operates over a temperature range of -40°C to +85°C and is available in a lead-free, RoHS-compliant package. Typical applications include process control, PLC analog output modules, industrial automation, and HART network transmitters. The AD5422's high accuracy and flexibility make it suitable for driving actuators, valves, and other analog control elements. When designing with the AD5422, ensure proper decoupling of the AVDD and DVDD supplies, and use a clean analog ground plane. The device requires an external reference for best performance, and the output amplifier can drive capacitive loads up to 1000 pF.

RFQ پەیوەندی
AD5422ACPZ-REEL7 - 16-Bit V/I Out DAC | Analog Devices
AD5422ACPZ-REEL7

AD5422ACPZ-REEL7 - 16-Bit V/I Out DAC | Analog Devices

The AD5422ACPZ-REEL7 is a single-channel, 16-bit, serial input, current source and voltage output digital-to-analog converter (DAC) from Analog Devices, designed for industrial process control applications. It is housed in a 40-lead LFCSP-VQ (6x6 mm) package and operates over a wide supply range. The device integrates a programmable current source (0 mA to 24 mA) and a programmable voltage output (0 V to 5 V, 0 V to 10 V, ±5 V, ±10 V), making it highly versatile for actuator control, PLCs, and transmitter systems. A digital-to-analog converter (DAC) is an electronic circuit that converts digital binary data into an analog voltage or current. The AD5422 belongs to the family of precision DACs used in industrial control loops, where it translates digital setpoints from a microcontroller or FPGA into precise analog signals that drive valves, motors, or transmitters. It is a key component in the signal chain from digital control to physical actuation, bridging the digital and analog domains. Key features include 16-bit resolution, a flexible serial interface (SPI-compatible), and an on-chip precision reference. The device offers a monotonic output with low integral nonlinearity (INL) and differential nonlinearity (DNL), ensuring accurate analog representation. It also includes a HART (Highway Addressable Remote Transducer) connectivity mode, allowing the DAC to superimpose a frequency-shift keying (FSK) signal on the current loop for smart transmitter communication. The AD5422 uses a segmented architecture with a precision resistor ladder and a programmable gain amplifier to achieve its output ranges. It operates from a single 10.8 V to 40 V supply for the current loop and a separate digital supply (2.7 V to 5.5 V), enabling direct interface with low-voltage logic. The device includes a power-on reset, a clear pin, and a fault alarm output, enhancing system reliability. Typical applications include industrial process control, PLC analog output modules, HART transmitters, and actuator control. Its high accuracy and flexible output ranges make it suitable for both current-loop and voltage-output systems, reducing component count and board space. When designing with the AD5422, ensure proper decoupling of the AVDD and DVDD supplies, and consider the thermal performance of the LFCSP package when driving high current loads. The HART mode requires careful filtering to avoid signal distortion.

RFQ پەیوەندی
AD542SH - Low-Noise BiFET Op Amp, ±18V, TO-99
AD542SH

AD542SH - Low-Noise BiFET Op Amp, ±18V, TO-99

The Analog Devices AD542SH is a single, precision BiFET-input operational amplifier specified for ±18 V operation, with a maximum input bias current of 25 pA, a slew rate of 13 V/µs, and a gain-bandwidth product of 1 MHz. The device is supplied in an 8-pin TO-99 hermetic metal-can package for applications requiring low input current and reliable operation in demanding analog signal paths. A BiFET operational amplifier is a voltage-feedback amplifier whose field-effect-transistor input stage provides very low input bias current. This input characteristic places the AD542SH in the broader hierarchy of FET-input operational amplifiers, analog amplifiers, signal-conditioning ICs, and power-management-supporting semiconductor devices. Low input current is especially useful when the amplifier must interface with high-impedance sensors, transducers, photodetectors, or precision measurement networks without loading the source. Key characteristics include a maximum input offset voltage of 1 mV, input offset drift of 15 µV/°C, a quiescent current of 1.5 mA, open-loop gain of 110 dB, and a listed common-mode rejection value of 80 dB. Its 13 V/µs slew rate supports comparatively fast large-signal transitions, while the 1 MHz gain-bandwidth product is suitable for precision gain, buffering, and general-purpose analog amplification. The AD542SH also provides overvoltage protection and can drive capacitive loads according to the manufacturer documentation. The AD542SH belongs to the AD542, AD544, and AD547 precision BiFET family, which uses monolithic BiFET construction and laser-trimming technology. This combination targets applications in which conventional bipolar input stages would draw excessive bias current or introduce unacceptable source loading. The low-bias architecture is especially valuable in instrumentation, photodetector interfaces, and high-impedance sensor amplifiers, while the laser-trimmed offset characteristics support stable DC operation. Typical uses include low-level sensor conditioning, photodiode and phototransistor amplification, buffered measurement inputs, precision current-to-voltage conversion, and gain stages in laboratory or industrial instrumentation. The hermetic TO-99 package can also suit equipment requiring a traditional metal-can mechanical format. Because the amplifier is a voltage-feedback device, feedback-network design, source impedance, load capacitance, and common-mode operating range remain central to stable operation. When laying out a circuit using the AD542SH, keep feedback resistors close to the device and minimize parasitic capacitance on the output and inverting-input nodes. Check bias-current cancellation for high source impedances, because although the maximum input bias current is only 25 pA, even picoamp-level current can create meaningful offset across megaohm-class resistances. Confirm output swing, input common-mode range, and capacitive-load stability against the manufacturer operating table. This page combines the AD542SH electrical characteristics, package details, application guidance, design notes, and family comparisons to support engineering selection and PCB implementation. It also organizes drop-in family options and clearly identifies which replacement questions require additional qualification before schematic or layout changes are approved.

RFQ پەیوەندی
AD544LH - Precision BiFET Op Amp, 25 pA Max | Analog Devices
AD544LH

AD544LH - Precision BiFET Op Amp, 25 pA Max | Analog Devices

The Analog Devices AD544LH is a single, precision BiFET operational amplifier specified for a maximum input bias current of 25 pA at room temperature and a maximum input offset voltage of 500 uV. The device is offered in the hermetically sealed, eight-pin TO-99 metal can package designated MBCY8, making it suitable for legacy and high-reliability analog signal-conditioning designs that require a through-hole metal-can footprint. A BiFET operational amplifier is a voltage-amplifier IC whose input stage uses field-effect transistors to produce very low input bias current. Within the signal-chain hierarchy, the AD544LH belongs to the family of precision amplifiers used for current-to-voltage conversion, instrumentation, buffering, and feedback control. Its low-bias input characteristic is especially useful when the source impedance is high and the amplifier must avoid loading the sensing node. The AD544 family uses precision monolithic BiFET construction combined with laser trimming for offset-voltage control. Key characteristics include one amplifier function, a maximum offset voltage of 500 uV for the AD544LH grade, and a maximum bias current of 25 pA when warmed up. The L grade operates from 0°C to +70°C, while the S grade in the same family covers -55°C to +125°C. All devices in the AD542, AD544, and AD547 series are offered in the hermetically sealed TO-99 metal can package. This construction supports use in older instrumentation, industrial analog interfaces, and precision measurement equipment where a conventional eight-lead metal-can footprint is already established on the board. Typical applications include precision transimpedance amplifiers, guarded sensor amplifiers, low-level signal conditioning, laboratory measurement systems, and industrial process-control interfaces. The low bias current helps preserve small sensor signals, while the trimmed offset limits input-referred error when the signal is amplified through high gain. When designing a replacement circuit, confirm the eight-pin TO-99 pin arrangement, supply voltage, common-mode range, output swing, and stability requirements before substitution. Keep sensitive input-node routing short, use a clean ground reference, and verify that the selected grade covers the intended ambient temperature range.

RFQ پەیوەندی
AD544SH - Military BiFET Operational Amplifier | Analog Devices
AD544SH

AD544SH - Military BiFET Operational Amplifier | Analog Devices

The Analog Devices AD544SH is a precision, military-grade BiFET operational amplifier packaged in an 8-lead hermetically sealed TO-99 metal can. The device combines a low-noise JFET input stage with an input bias current of 25 pA maximum when warmed up, while the S-grade AD544SH supports an operating temperature range of -55°C to +125°C. Its hermetic metal-can construction makes it suitable for instrumentation, sensor interfaces, and precision analog signal paths requiring a low-bias input resistance. A BiFET operational amplifier is an input stage built around junction field-effect transistors. The BiFET input architecture places a very low bias current across high-impedance sources, allowing the amplifier to sense weak currents and voltages without loading the source. In the broader hierarchy, the AD544SH belongs to the operational amplifier class, then to precision analog amplifiers, and finally to semiconductor signal-conditioning ICs used in test, measurement, and instrumentation systems. The principal benefits of the AD544SH include its 25 pA maximum warmed input bias current, low-offset BiFET input characteristics, and extended -55°C to +125°C operating range. The 25 pA bias rating is particularly useful with photodiodes, high-impedance transducers, charge-sensitive circuits, and guarded sensor nodes. The military temperature grade makes the device more appropriate than the commercial J-, K-, or L-grade AD544 variants where environmental extremes and long-term parameter stability are important. Internally, the AD544 uses a monolithic BiFET and laser-trimmed construction. Laser trimming reduces offset-related variation between individual devices, while the monolithic implementation combines the FET input stage and compensation network in one package. The resulting topology supports stable amplification of low-level analog signals while preserving high input impedance. Offset-null terminals permit local input-offset adjustment when the application requires fine trimming beyond the factory calibration. Typical uses include precision current-to-voltage conversion, low-current photodetection, bridge-sensor amplification, laboratory buffer stages, and high-impedance instrumentation. In a transimpedance amplifier, the AD544SH's low input bias current reduces error in the feedback-resistor node. In a buffer or voltage follower, its high input impedance limits loading of the source, although the circuit remains subject to input capacitance, leakage, and environmental noise considerations. For dependable operation, keep the input and feedback impedances realistic for the ambient humidity and temperature, bypass the supply pins close to the device, and route offset-null connections only when external trimming is required. The manufacturer datasheet should be consulted for the complete electrical limits, pin functions, offset-voltage characteristics, compensation details, and recommended application circuit before qualifying the AD544SH in production equipment. This page consolidates the available manufacturer information, exact-MPN pricing record, package details, family comparison, and practical engineering guidance for engineers evaluating the AD544SH as a hermetically sealed, military-temperature BiFET operational amplifier.

RFQ پەیوەندی