بەرهەمەکان (5,100+)

TS3A4751PWR - 0.9-Ohm Quad SPST Analog Switch | Texas Instruments
TS3A4751PWR

TS3A4751PWR - 0.9-Ohm Quad SPST Analog Switch | Texas Instruments

The Texas Instruments TS3A4751PWR is a bidirectional, 4-channel, normally-open (NO) single-pole single-throw (SPST) analog switch in a 14-pin TSSOP package. It operates from a single 1.6V to 3.6V supply, delivers a maximum on-state resistance of 0.9 ohm at a 3V supply, and handles rail-to-rail analog signals with fast switching speeds and very low quiescent power. An analog switch is an IC that routes or isolates analog signal paths under digital control. Within the signal-routing hierarchy, the TS3A4751 belongs to the SPST switch family, a subset of analog switches and multiplexers used in signal conditioning and power-management systems. Key features include 0.9-ohm maximum Ron at 3V (1.5-ohm maximum at 1.8V), Ron flatness of 0.4-ohm maximum at 3V, and Ron matching of 0.05-ohm maximum at 3V. The 1.8-V CMOS-compatible digital inputs allow direct interface with low-voltage GPIO when using a 3-V supply, eliminating level-shift circuitry. The device is available in 14-pin TSSOP (PW), 14-pin VQFN (RGY), and 2x2-mm micro X2QFN (RUC) packages. The low Ron supports power-switching and low-distortion signal paths, while rail-to-rail operation preserves full signal swing on 1.8V, 2.5V, and 3.3V rails. Typical applications include low-voltage power switching, audio signal routing in portable devices, battery-powered test points, and general-purpose signal muxing in smartphones, tablets, and industrial sensing modules. Its normally-open configuration makes it suitable for fail-safe, default-disconnected paths. When designing, remember that Ron rises at lower supply voltages: at a 1.8-V supply the maximum Ron is 1.5 ohm, so account for insertion loss and on-resistance flatness in high-fidelity or precision-current paths. According to TI datasheet, the TS3A4751 is the NO-switch counterpart within the TI low-voltage quad SPST family.

RFQ پەیوەندی
TS3A5018PWR - 10-Ohm Quad SPDT Analog Switch | Texas Instruments
TS3A5018PWR

TS3A5018PWR - 10-Ohm Quad SPDT Analog Switch | Texas Instruments

The Texas Instruments TS3A5018PWR is a quad single-pole double-throw (SPDT) analog switch designed to operate from a 1.8V to 3.6V supply in a 16-pin TSSOP (PW) package rated from -40C to +85C. It handles both digital and analog signals, and signals up to V+ can be transmitted in either direction. An analog switch is a semiconductor device that selectively connects or disconnects an analog signal path under digital control. It is a fundamental signal-routing building block in the broader family of multiplexers, demultiplexers, and interface ICs. Analog switches provide a low-resistance path when ON and a high-impedance path when OFF, replacing bulky mechanical relays in audio/video routing, data acquisition, and communication systems. Key features include the wide 1.8V to 3.6V operating range (ideal for battery-powered and 3.3V systems), low 10-ohm ON-state resistance with excellent channel-to-channel matching, and low charge injection that minimizes glitches during switch transitions. All four SPDT switches share a common enable function so the entire device can be disabled to reduce power consumption. The TS3A5018 is built on TI CMOS process technology, providing low quiescent power dissipation and high reliability. Bidirectional signal flow means either of the two throw terminals can serve as the port, essential for multiplexing and demultiplexing on the same hardware. Turn-on and turn-off times are fast, supporting high-speed signal routing in data converters and communication interfaces. Typical applications include audio signal routing in portable devices, battery-powered data acquisition front ends, communication interface switching, and test equipment signal multiplexing. The low power consumption and wide supply range make it well suited for portable and industrial designs. Design consideration: the 10-ohm ON resistance introduces series attenuation in high-impedance circuits, so prefer low-impedance loads or buffer the switched node. Place a 0.1uF decoupling capacitor close to the V+ pin, and use the enable pin in battery designs to cut standby current when switching is idle.

RFQ پەیوەندی
TS3L100D - 4-Channel 3.3V SPDT LAN Switch | Texas Instruments
TS3L100D

TS3L100D - 4-Channel 3.3V SPDT LAN Switch | Texas Instruments

Texas Instruments TS3L100D is a four-channel, 3.3 V SPDT wide-bandwidth LAN switch with low on-state resistance, supplied in a 16-pin SOIC package. It provides two independent 2:1 multiplexer or demultiplexer paths per channel and uses a common switch-enable input, making it suitable for routing Ethernet-class signals through a compact analog switch network. An SPDT switch is an analog switch that selects one of two signal paths from a common terminal. The TS3L100 belongs to the broader LAN-switch, analog-switch, multiplexer, interface-IC, and semiconductor hierarchy. Its four-channel architecture consolidates repetitive signal-routing functions while reducing the number of discrete switches required in networking, test, measurement, and embedded communication equipment. Key features include four independently addressed SPDT channels, a common switch-enable control, 3.3 V operation, wide signal bandwidth, and low on-state resistance. The on-state resistance is important because signal attenuation and insertion loss can increase as switch resistance rises. Wide bandwidth also makes the device useful when routing higher-frequency data or analog signals rather than only slow control signals. The TS3L100D combines multiplexing and demultiplexing in one device. It can route a common source toward either destination, or direct one of two inputs to a shared output, depending on the external connection and enable state. This dual-use architecture allows the same device to support shared test equipment, muxed signal paths, line monitoring, and compact network-interface routing. Typical applications include 10/100 Ethernet PHY signal routing, LAN interface multiplexing, test-and-measurement signal paths, instrumentation, network adapters, and embedded systems that require multiple high-speed connections. In Ethernet designs, the switch can reduce the number of discrete routing components while preserving a compact board footprint. PCB layout should keep input and output traces short, provide a solid ground reference, and decouple the 3.3 V supply near the device. Designers should consult the Texas Instruments pin-description table before routing signals because the exact enable polarity, channel pin mapping, and breakout configuration must match the intended PCB footprint. This product page consolidates the official device description, package information, sourcing guidance, application analysis, and verified-source links. It also distinguishes confirmed electrical characteristics from parameters that require confirmation from the manufacturer datasheet before schematic or layout release.

RFQ پەیوەندی
TS3L100DR - 4-Channel 3.3V SPDT LAN Switch | Texas Instruments (Tape & Reel)
TS3L100DR

TS3L100DR - 4-Channel 3.3V SPDT LAN Switch | Texas Instruments (Tape & Reel)

Texas Instruments TS3L100DR is a four-channel, 3.3 V SPDT wide-bandwidth LAN switch with low on-state resistance, supplied in a 16-pin SOIC package. It provides two independent 2:1 multiplexer or demultiplexer paths per channel and uses a common switch-enable input, making it suitable for routing Ethernet-class signals through a compact analog switch network. An SPDT switch is an analog switch that selects one of two signal paths from a common terminal. The TS3L100 belongs to the broader LAN-switch, analog-switch, multiplexer, interface-IC, and semiconductor hierarchy. Its four-channel architecture consolidates repetitive signal-routing functions while reducing the number of discrete switches required in networking, test, measurement, and embedded communication equipment. Key features include four independently addressed SPDT channels, a common switch-enable control, 3.3 V operation, wide signal bandwidth, and low on-state resistance. The on-state resistance is important because signal attenuation and insertion loss can increase as switch resistance rises. Wide bandwidth also makes the device useful when routing higher-frequency data or analog signals rather than only slow control signals. The TS3L100DR combines multiplexing and demultiplexing in one device. It can route a common source toward either destination, or direct one of two inputs to a shared output, depending on the external connection and enable state. This dual-use architecture allows the same device to support shared test equipment, muxed signal paths, line monitoring, and compact network-interface routing. Typical applications include 10/100 Ethernet PHY signal routing, LAN interface multiplexing, test-and-measurement signal paths, instrumentation, network adapters, and embedded systems that require multiple high-speed connections. In Ethernet designs, the switch can reduce the number of discrete routing components while preserving a compact board footprint. PCB layout should keep input and output traces short, provide a solid ground reference, and decouple the 3.3 V supply near the device. Designers should consult the Texas Instruments pin-description table before routing signals because the exact enable polarity, channel pin mapping, and breakout configuration must match the intended PCB footprint. This product page consolidates the official device description, package information, sourcing guidance, application analysis, and verified-source links. It also distinguishes confirmed electrical characteristics from parameters that require confirmation from the manufacturer datasheet before schematic or layout release.

RFQ پەیوەندی
TS3L110D - 4-Channel 10/100 LAN Switch | Texas Instruments
TS3L110D

TS3L110D - 4-Channel 10/100 LAN Switch | Texas Instruments

The Texas Instruments TS3L110D is a 3.3 V, 2:1 SPDT, four-channel 10/100 Base-T LAN switch with eight differential channels muxed to four channels. It is packaged in a 16-pin SOIC and operates from 3 V to 3.6 V. The device provides an 8 ohm on-resistance, approximately 700 uA of supply current, and integrated control for selecting between paired differential LAN signals. An Ethernet LAN switch is an interface integrated circuit that routes differential signals between a transceiver or controller and multiple physical network connections. The TS3L110D belongs to the broader networking-switch hierarchy: four-channel LAN switch, special-purpose interface IC, and semiconductor. Its 2:1 multiplexer arrangement allows one differential signal pair to be connected to either of two alternatives, reducing the number of external routing components required in compact Ethernet equipment. The TS3L110D supports four independently controlled 10/100 Base-T channels, with each channel implemented as an SPDT selector. Its 3 V to 3.6 V supply range is suited to 3.3 V systems, while the 8 ohm on-resistance provides a defined insertion-loss contribution at Ethernet signal rates. A low supply current of approximately 700 uA is useful in power-constrained network-access equipment. The 16-pin SOIC package supports conventional surface-mount assembly and inspection. The device multiplexes eight differential inputs to four output channels. This arrangement is appropriate when an Ethernet controller, media-access controller, or PHY interface needs selectable access to more than one physical channel. Because it is a switching device rather than an active repeater or transceiver, the TS3L110D does not itself establish the physical-layer link. It selects existing differential signals and must be paired with suitable 10/100 Ethernet PHYs, magnetics, connectors, and network-control circuitry. Typical uses include compact Ethernet switches, network interface controllers, industrial Ethernet equipment, embedded gateways, and set-top or communications products. The part can also be used in test systems where a controller must route differential pairs between instrumentation or PHY channels. Design choices should account for trace impedance, connector and magnetics layout, control timing, and the high-speed return path between the switch and its Ethernet PHY. Use the manufacturer pin-description and typical-application diagrams when assigning control inputs and differential nets. Maintain controlled-impedance routing for Ethernet pairs, keep switch traces short, and place bypass capacitance close to the supply pin. Verify the exact enable polarity, control interface, and recommended resistor and capacitor values against the current manufacturer datasheet before releasing a PCB. This page organizes the verified 3.3 V supply, SPDT configuration, four-channel architecture, 8 ohm on-resistance, approximately 700 uA supply current, 16-pin SOIC construction, application guidance, and qualified replacement options into an engineering-focused reference.

RFQ پەیوەندی
TS3L110DR - 4-Channel 10/100 LAN Switch | Texas Instruments (Tape & Reel)
TS3L110DR

TS3L110DR - 4-Channel 10/100 LAN Switch | Texas Instruments (Tape & Reel)

The Texas Instruments TS3L110DR is a 3.3 V, 2:1 SPDT, four-channel 10/100 Base-T LAN switch with eight differential channels muxed to four channels. It is packaged in a 16-pin SOIC and operates from 3 V to 3.6 V. The device provides an 8 ohm on-resistance, approximately 700 uA of supply current, and integrated control for selecting between paired differential LAN signals. An Ethernet LAN switch is an interface integrated circuit that routes differential signals between a transceiver or controller and multiple physical network connections. The TS3L110DR belongs to the broader networking-switch hierarchy: four-channel LAN switch, special-purpose interface IC, and semiconductor. Its 2:1 multiplexer arrangement allows one differential signal pair to be connected to either of two alternatives, reducing the number of external routing components required in compact Ethernet equipment. The TS3L110DR supports four independently controlled 10/100 Base-T channels, with each channel implemented as an SPDT selector. Its 3 V to 3.6 V supply range is suited to 3.3 V systems, while the 8 ohm on-resistance provides a defined insertion-loss contribution at Ethernet signal rates. A low supply current of approximately 700 uA is useful in power-constrained network-access equipment. The 16-pin SOIC package supports conventional surface-mount assembly and inspection. The device multiplexes eight differential inputs to four output channels. This arrangement is appropriate when an Ethernet controller, media-access controller, or PHY interface needs selectable access to more than one physical channel. Because it is a switching device rather than an active repeater or transceiver, the TS3L110DR does not itself establish the physical-layer link. It selects existing differential signals and must be paired with suitable 10/100 Ethernet PHYs, magnetics, connectors, and network-control circuitry. Typical uses include compact Ethernet switches, network interface controllers, industrial Ethernet equipment, embedded gateways, and set-top or communications products. The part can also be used in test systems where a controller must route differential pairs between instrumentation or PHY channels. Design choices should account for trace impedance, connector and magnetics layout, control timing, and the high-speed return path between the switch and its Ethernet PHY. Use the manufacturer pin-description and typical-application diagrams when assigning control inputs and differential nets. Maintain controlled-impedance routing for Ethernet pairs, keep switch traces short, and place bypass capacitance close to the supply pin. Verify the exact enable polarity, control interface, and recommended resistor and capacitor values against the current manufacturer datasheet before releasing a PCB. This page organizes the verified 3.3 V supply, SPDT configuration, four-channel architecture, 8 ohm on-resistance, approximately 700 uA supply current, 16-pin SOIC construction, application guidance, and qualified replacement options into an engineering-focused reference.

RFQ پەیوەندی
TS3USB3000MRSER - DPDT USB 2.0/MHL Switch | TI | UQFN-10
TS3USB3000MRSER

TS3USB3000MRSER - DPDT USB 2.0/MHL Switch | TI | UQFN-10

The Texas Instruments TS3USB3000MRSER is a double-pole, double-throw (DPDT) analog switch that combines a USB 2.0 High-Speed (480 Mbps) switch and a Mobile High-Definition Link (MHL) switch in a single 10-pin UQFN (RSE) package measuring 1.5 mm × 2.0 mm. It supports a -3 dB bandwidth of 6.1 GHz on the MHL path and operates from a 2.3 V to 4.8 V supply. The device is designed to share a common USB or Micro-USB connector between USB 2.0 data and MHL video signals in mobile phones, tablets, and portable media devices. A USB switch IC is a special-purpose analog multiplexer that routes high-speed differential signals between a single downstream port and two upstream paths (host vs. MHL sink). In the hierarchy of power management and signal routing components, this part belongs to the USB interface IC category, sitting between the connector and the application processor. DPDT switches such as the TS3USB3000 are critical because they must pass 480 Mbps USB signals and up to 3 GHz MHL content with minimal insertion loss, low crosstalk, and high off-isolation. Key features of the TS3USB3000 include low on-resistance (Ron) on the USB data paths, low on-capacitance (Con) for high-bandwidth signal transmission, 1.8-V-compatible select pins for direct GPIO control from a mobile processor, and a quiescent current of approximately 5 uA. The wide supply range (2.3 V to 4.8 V) covers both 3.3 V system rails and the typical 3.8 V Li-ion battery range without additional regulation. The small 1.5 mm × 2 mm UQFN footprint makes it ideal for space-constrained mobile applications. The TS3USB3000 uses a charge-pump-less architecture with simple CMOS logic-level select inputs. The two select pins (S1 and S0 per TI documentation) determine whether the common port is routed to the USB path or the MHL path. Internal ESD protection on the signal pins improves robustness against connector-level transients, which is critical for hot-plug consumer electronics. Typical applications include smartphones and tablets with MHL-enabled video output, automotive infotainment systems that mirror mobile content via USB or MHL, portable media players, and USB/MHL dongles. The wide bandwidth also makes it suitable for any system needing to multiplex two high-speed differential pairs onto a single connector. When designing with this part, place the device as close as possible to the USB/MHL connector to minimize stub lengths and signal-integrity degradation. Use controlled-impedance differential routing (90 ohm) on both sides of the switch, and provide adequate ground stitching vias along the signal path to maintain return-current continuity. This page synthesizes distributor pricing, pin-compatible alternatives, and practical design notes that are not aggregated in any single manufacturer datasheet or distributor catalog page.

RFQ پەیوەندی
TS3V330D - 4-Channel SPDT Video Switch | Texas Instruments
TS3V330D

TS3V330D - 4-Channel SPDT Video Switch | Texas Instruments

Texas Instruments TS3V330D is a 3.3 V, four-channel, 2:1 SPDT video switch packaged in a 16-pin SOIC. It provides one enable input for the quad switch and is designed for wide-bandwidth video-routing applications. The device operates across the -40°C to +85°C industrial temperature range. Its low on-state resistance is intended to minimize signal attenuation when a video path is selected. A video switch is an analog multiplexer or demultiplexer that routes one of two signal paths to a common output. The SPDT configuration supports source selection, signal swapping, and isolation between alternate inputs. In the system hierarchy, the TS3V330D belongs to the analog switch family, which falls under interface ICs and broader semiconductor signal-routing devices. Four integrated channels reduce component count when several video lines must be switched together. The principal features of the TS3V330D include four independent 2:1 switch channels, a common single switch-enable input, a 3.3 V supply requirement, wide-bandwidth video switching, and low on-state resistance. The 16-SOIC package supports conventional surface-mount assembly. These characteristics make the device relevant to video test equipment, multimedia routing, projection systems, display processing, and industrial imaging designs where multiple source paths must be selected electronically. The TS3V330D uses a single enable-control architecture rather than four separate control inputs. This simplifies command-line interfacing when all four channels must change state together. Its wide-bandwidth design is intended to preserve video signals while keeping conduction loss relatively low. Because a video switch is an analog device, signal integrity depends not only on on-state resistance but also on off-state isolation, channel matching, board-level parasitics, and the impedance of the source and destination circuitry. Typical implementations include selecting between composite or component video inputs, routing test signals into an oscilloscope or video analyzer, switching cameras within surveillance equipment, and controlling auxiliary video paths in projection or display equipment. The common enable input also supports systems that need to mute or disconnect several video lines together. Firmware-controlled source selection is particularly practical when the same board must support several external connectors. PCB layout should keep video traces short, provide a continuous ground reference, and place bypass capacitance close to the supply pin. Designers should verify the complete channel bandwidth, isolation, insertion loss, and crosstalk against the source impedance and cable length. The common enable signal should be controlled only after the selected input is stable, preventing transient switching artifacts from reaching downstream video circuitry. This product page combines the device identity, package information, operating limits, confirmed cross-reference options, and practical design guidance for engineers evaluating the TS3V330D. It also distinguishes the core four-channel SPDT switching function from broader interface and signal-routing categories, making the component easier to compare with suitable video-switching designs.

RFQ پەیوەندی
TS3V330DR - 4-Channel SPDT Video Switch | Texas Instruments (Tape & Reel)
TS3V330DR

TS3V330DR - 4-Channel SPDT Video Switch | Texas Instruments (Tape & Reel)

Texas Instruments TS3V330DR is a 3.3 V, four-channel, 2:1 SPDT video switch packaged in a 16-pin SOIC. It provides one enable input for the quad switch and is designed for wide-bandwidth video-routing applications. The device operates across the -40°C to +85°C industrial temperature range. Its low on-state resistance is intended to minimize signal attenuation when a video path is selected. A video switch is an analog multiplexer or demultiplexer that routes one of two signal paths to a common output. The SPDT configuration supports source selection, signal swapping, and isolation between alternate inputs. In the system hierarchy, the TS3V330DR belongs to the analog switch family, which falls under interface ICs and broader semiconductor signal-routing devices. Four integrated channels reduce component count when several video lines must be switched together. The principal features of the TS3V330DR include four independent 2:1 switch channels, a common single switch-enable input, a 3.3 V supply requirement, wide-bandwidth video switching, and low on-state resistance. The 16-SOIC package supports conventional surface-mount assembly. These characteristics make the device relevant to video test equipment, multimedia routing, projection systems, display processing, and industrial imaging designs where multiple source paths must be selected electronically. The TS3V330DR uses a single enable-control architecture rather than four separate control inputs. This simplifies command-line interfacing when all four channels must change state together. Its wide-bandwidth design is intended to preserve video signals while keeping conduction loss relatively low. Because a video switch is an analog device, signal integrity depends not only on on-state resistance but also on off-state isolation, channel matching, board-level parasitics, and the impedance of the source and destination circuitry. Typical implementations include selecting between composite or component video inputs, routing test signals into an oscilloscope or video analyzer, switching cameras within surveillance equipment, and controlling auxiliary video paths in projection or display equipment. The common enable input also supports systems that need to mute or disconnect several video lines together. Firmware-controlled source selection is particularly practical when the same board must support several external connectors. PCB layout should keep video traces short, provide a continuous ground reference, and place bypass capacitance close to the supply pin. Designers should verify the complete channel bandwidth, isolation, insertion loss, and crosstalk against the source impedance and cable length. The common enable signal should be controlled only after the selected input is stable, preventing transient switching artifacts from reaching downstream video circuitry. This product page combines the device identity, package information, operating limits, confirmed cross-reference options, and practical design guidance for engineers evaluating the TS3V330DR. It also distinguishes the core four-channel SPDT switching function from broader interface and signal-routing categories, making the component easier to compare with suitable video-switching designs.

RFQ پەیوەندی
TS3V340D - Quad SPDT 3.3V Video Switch | Texas Instruments
TS3V340D

TS3V340D - Quad SPDT 3.3V Video Switch | Texas Instruments

The Texas Instruments TS3V340D is a 3.3 V, four-channel video switch with four independent 2:1 SPDT switch functions, low and flat on-state resistance, and high-bandwidth signal routing in a 16-pin SOIC package. It is designed for compact systems that require controlled selection between two video signals for each of four channels. An analog video switch is an interface IC that routes high-frequency baseband video signals between a common output and one of two selectable inputs. Its switching architecture allows a source to be connected to a display, processing chain, test point, or other destination without duplicating the upstream signal source. The TS3V340 family combines video-signal switching with a 3.3 V supply, making it appropriate for modern low-voltage display and video-processing equipment. The principal features of the TS3V340D include four switch channels, a 2:1 SPDT configuration per channel, low and flat on-state resistance, and high-bandwidth operation. The flat resistance characteristic helps reduce signal-level variation as the switch state changes. Its 16-pin SOIC package supports conventional surface-mount assembly while keeping the four-channel routing function in a relatively compact footprint. Each independently controlled SPDT channel can connect its common terminal to either of two input terminals. This arrangement is useful for source selection, signal-path isolation, video test points, and routing between primary and backup signal paths. The manufacturer describes the TS3V340 as a 3.3 V, four-channel video switch with flat on-state resistance, while the TS3V340D ordering option is associated with the 16-pin SOIC package. Typical uses include projector input selection, video observation systems, industrial inspection equipment, broadcast and presentation infrastructure, test and measurement systems, and consumer displays. Multiple switch channels can support several connections within one compact assembly, reducing the number of discrete routing components required on a video-oriented circuit board. For implementation, route high-speed video traces as short and directly connected as practical, maintain a continuous ground reference beneath the signal path, and place the device close to the switching point. Control inputs should be driven from compatible 3.3 V logic, and unused inputs should be configured according to the manufacturer pin-description table. Verify timing, signal levels, and channel isolation in the final board environment. This product summary combines the manufacturer device description with application-oriented guidance, package information, engineering cautions, and transparent sourcing information. It is intended to help designers evaluate the TS3V340D for 3.3 V video-routing tasks while separately checking the authoritative datasheet for complete electrical limits, timing, and pin assignments.

RFQ پەیوەندی
TS3V340DR - Quad SPDT 3.3V Video Switch | Texas Instruments (Tape & Reel)
TS3V340DR

TS3V340DR - Quad SPDT 3.3V Video Switch | Texas Instruments (Tape & Reel)

The Texas Instruments TS3V340DR is a 3.3 V, four-channel video switch with four independent 2:1 SPDT switch functions, low and flat on-state resistance, and high-bandwidth signal routing in a 16-pin SOIC package. It is designed for compact systems that require controlled selection between two video signals for each of four channels. An analog video switch is an interface IC that routes high-frequency baseband video signals between a common output and one of two selectable inputs. Its switching architecture allows a source to be connected to a display, processing chain, test point, or other destination without duplicating the upstream signal source. The TS3V340 family combines video-signal switching with a 3.3 V supply, making it appropriate for modern low-voltage display and video-processing equipment. The principal features of the TS3V340DR include four switch channels, a 2:1 SPDT configuration per channel, low and flat on-state resistance, and high-bandwidth operation. The flat resistance characteristic helps reduce signal-level variation as the switch state changes. Its 16-pin SOIC package supports conventional surface-mount assembly while keeping the four-channel routing function in a relatively compact footprint. Each independently controlled SPDT channel can connect its common terminal to either of two input terminals. This arrangement is useful for source selection, signal-path isolation, video test points, and routing between primary and backup signal paths. The manufacturer describes the TS3V340 as a 3.3 V, four-channel video switch with flat on-state resistance, while the TS3V340DR ordering option is associated with the 16-pin SOIC package. Typical uses include projector input selection, video observation systems, industrial inspection equipment, broadcast and presentation infrastructure, test and measurement systems, and consumer displays. Multiple switch channels can support several connections within one compact assembly, reducing the number of discrete routing components required on a video-oriented circuit board. For implementation, route high-speed video traces as short and directly connected as practical, maintain a continuous ground reference beneath the signal path, and place the device close to the switching point. Control inputs should be driven from compatible 3.3 V logic, and unused inputs should be configured according to the manufacturer pin-description table. Verify timing, signal levels, and channel isolation in the final board environment. This product summary combines the manufacturer device description with application-oriented guidance, package information, engineering cautions, and transparent sourcing information. It is intended to help designers evaluate the TS3V340DR for 3.3 V video-routing tasks while separately checking the authoritative datasheet for complete electrical limits, timing, and pin assignments.

RFQ پەیوەندی
TS5A2053 - 10Ω SPDT Analog Switch | Texas Instruments
TS5A2053

TS5A2053 - 10Ω SPDT Analog Switch | Texas Instruments

The TS5A2053 is a single-pole double-throw (SPDT) analog switch from Texas Instruments, designed to operate from 1.65 V to 5.5 V. It can handle both digital and analog signals, and signals up to V+ can be transmitted in either direction. The device features a low ON-state resistance of 10Ω (typical) and includes an enable pin for power management. It is available in the 8-pin VSSOP (DCU) package, making it suitable for space-constrained applications. An analog switch is a semiconductor device that selectively connects or disconnects an analog signal path based on a digital control signal. It is a fundamental building block in signal routing, multiplexing, and sample-and-hold circuits. Analog switches are part of the broader category of interface ICs, which manage signal integrity and connectivity between different subsystems in electronic systems. Key features of the TS5A2053 include a low ON-state resistance of 10Ω, which minimizes signal attenuation, and a wide operating voltage range from 1.65 V to 5.5 V, allowing compatibility with various logic levels. The device also offers fast switching speeds, with a typical turn-on time of 20 ns and turn-off time of 15 ns, making it suitable for high-frequency signal routing. The enable pin allows the switch to be disabled, reducing power consumption in standby modes. Technically, the TS5A2053 uses a CMOS process that provides low power consumption and high ESD robustness. The device has a bandwidth of 300 MHz, enabling it to pass high-frequency signals with minimal distortion. The ON-state resistance is flat across the input voltage range, ensuring consistent performance. The device also features break-before-make switching, preventing momentary short circuits between channels. Typical applications include audio signal routing, data acquisition systems, and test equipment. In audio systems, the low ON-state resistance and high bandwidth ensure minimal signal degradation. In data acquisition, the switch can route analog signals to an ADC, with the enable pin allowing power saving when not in use. In test equipment, the TS5A2053 can be used for signal multiplexing and routing. When designing with the TS5A2053, it is important to consider the ON-state resistance and its effect on signal integrity. For high-frequency signals, the parasitic capacitance of the switch can cause signal attenuation, so proper PCB layout and termination are recommended. Additionally, the enable pin should be tied to a defined logic level to avoid floating inputs.

RFQ پەیوەندی
TS5L100D - 4-Channel 5V SPDT LAN Switch | Texas Instruments
TS5L100D

TS5L100D - 4-Channel 5V SPDT LAN Switch | Texas Instruments

The Texas Instruments TS5L100D is a 4-channel, 2:1 SPDT LAN switch operating from a 5 V supply and packaged in a 16-pin SOIC. It is designed as a four-bit 1-of-2 multiplexer/demultiplexer with one common switch-enable input, allowing paired signal paths to be routed through a compact analog switching stage. The device is identified by the manufacturer as a wide-bandwidth LAN switch with low on-state resistance. A LAN switch is an analog signal-routing component used to select between two signal paths on each channel. In the TS5L100D, four independent SPDT channels share a single enable control, making the device suitable for systems that need synchronized routing of multiple differential or single-ended network-related signals. The common enable architecture reduces the number of control inputs required when all channels must change state together. The primary design benefits of the TS5L100D are its 4-channel integration, 5 V supply operation, 2:1 SPDT configuration, and low on-state resistance. Combining four switch elements in one 16-SOIC package can simplify board planning compared with four discrete SPDT packages. Low on-state resistance helps preserve signal integrity when the switch is inserted into a transmission path, while the wide-bandwidth positioning makes the device relevant to LAN signal-routing designs. The TS5L100D is used when a design requires multiplexing or demultiplexing across multiple related channels rather than independent routing of unrelated signals. Common applications include network-interface signal selection, test and measurement signal-path routing, communication equipment, and embedded systems that must switch between two external signal sources. The shared enable input is particularly useful when paired or grouped channels need coordinated selection. For layout, place the device near the signal paths it serves and route the four channels consistently to minimize trace-length differences and unintended coupling. Keep the enable trace short and away from high-energy switching nodes. Confirm the exact pin assignments, recommended supply bypassing, control thresholds, insertion loss, bandwidth, and operating-temperature limits in the manufacturer datasheet before finalizing a production board. This product page organizes the TS5L100D function, package information, sourcing path, comparison points, and application guidance into one engineering reference. It also highlights the important trade-off between integration and board flexibility: the four-channel common-enable architecture is efficient for coordinated LAN routing, while designers needing independently controlled or differently configured paths should confirm that the shared-control arrangement matches the system architecture.

RFQ پەیوەندی
TS5L100DR - 4-Channel 5V SPDT LAN Switch | Texas Instruments (Tape & Reel)
TS5L100DR

TS5L100DR - 4-Channel 5V SPDT LAN Switch | Texas Instruments (Tape & Reel)

The Texas Instruments TS5L100DR is a 4-channel, 2:1 SPDT LAN switch operating from a 5 V supply and packaged in a 16-pin SOIC. It is designed as a four-bit 1-of-2 multiplexer/demultiplexer with one common switch-enable input, allowing paired signal paths to be routed through a compact analog switching stage. The device is identified by the manufacturer as a wide-bandwidth LAN switch with low on-state resistance. A LAN switch is an analog signal-routing component used to select between two signal paths on each channel. In the TS5L100DR, four independent SPDT channels share a single enable control, making the device suitable for systems that need synchronized routing of multiple differential or single-ended network-related signals. The common enable architecture reduces the number of control inputs required when all channels must change state together. The primary design benefits of the TS5L100DR are its 4-channel integration, 5 V supply operation, 2:1 SPDT configuration, and low on-state resistance. Combining four switch elements in one 16-SOIC package can simplify board planning compared with four discrete SPDT packages. Low on-state resistance helps preserve signal integrity when the switch is inserted into a transmission path, while the wide-bandwidth positioning makes the device relevant to LAN signal-routing designs. The TS5L100DR is used when a design requires multiplexing or demultiplexing across multiple related channels rather than independent routing of unrelated signals. Common applications include network-interface signal selection, test and measurement signal-path routing, communication equipment, and embedded systems that must switch between two external signal sources. The shared enable input is particularly useful when paired or grouped channels need coordinated selection. For layout, place the device near the signal paths it serves and route the four channels consistently to minimize trace-length differences and unintended coupling. Keep the enable trace short and away from high-energy switching nodes. Confirm the exact pin assignments, recommended supply bypassing, control thresholds, insertion loss, bandwidth, and operating-temperature limits in the manufacturer datasheet before finalizing a production board. This product page organizes the TS5L100DR function, package information, sourcing path, comparison points, and application guidance into one engineering reference. It also highlights the important trade-off between integration and board flexibility: the four-channel common-enable architecture is efficient for coordinated LAN routing, while designers needing independently controlled or differently configured paths should confirm that the shared-control arrangement matches the system architecture.

RFQ پەیوەندی
TSB011 - Data Unverified, No Confirmed Electronic Component Found
TSB011

TSB011 - Data Unverified, No Confirmed Electronic Component Found

The MPN TSB011 could not be confirmed as a specific electronic component from the verified web data retrieved for this query. Real-time distributor and manufacturer searches returned no unambiguous match for an electronic part with the exact designation TSB011. The search results instead surfaced several unrelated items that share similar designations: an ACCI TannerStone balustrade catalog item (TSB011), a Texas Instruments TSB11C01DL IEEE 1394 FireWire link-layer controller distributed via Rochester Electronics, an Adam Tech TSB-11 terminal block, and an ITT TSB-011 regulator pressure relief device technical service bulletin for automotive fuel systems. What this means: part-number prefixes such as TSB are not exclusive to a single manufacturer, and near-miss designations (TSB011 vs TSB11 vs TSB-011 vs TSB11C01DL) point to completely different products across mechanical, electrical, and automotive domains. Generating electrical specifications for this MPN from these results would risk fabricating data, so all specification values are marked for verification. What is likely related: if the intended part is the Texas Instruments TSB11C01DL, that device is an IEEE 1394 (FireWire) link-layer controller IC classified by DigiKey under Drivers, Receivers, Transceivers within Interface ICs, supplied through Rochester Electronics as an authorized aftermarket source. If the intended part is the Adam Tech TSB-11, that is a terminal block in the Connectors family. Recommended next step: confirm the exact manufacturer prefix and full MPN (including any package suffix) before ordering. This page will be updated once verified datasheet data is available.

RFQ پەیوەندی
TSI384-133ILV - PCIe to PCI-X Bridge 256-BGA | Renesas Electronics
TSI384-133ILV

TSI384-133ILV - PCIe to PCI-X Bridge 256-BGA | Renesas Electronics

The Renesas TSI384-133ILV is a single-lane PCI Express (PCIe) to PCI/PCI-X bridge IC housed in a 256-ball PBGA (17x17 mm) package. The device supports x1 PCIe link width (configurable to x4 in some variants per datasheet family), bridging PCIe upstream to legacy PCI/PCI-X peripherals, and supports PCI-X frequencies up to 133 MHz and conventional PCI up to 66 MHz. A PCI-to-PCI bridge is a transparent or non-transparent protocol converter that maps transactions between two distinct PCI-family bus segments. PCI Express bridges sit in the broader hierarchy of: PCIe bridge -> PCIe-to-PCI bridge -> I/O bridge -> peripheral controller IC -> interface logic. Within Renesas' PCI/PCIe product family the Tsi384 is the higher-performance, higher-pin-count sibling of the smaller Tsi381 (144-ball BGA, 13x13 mm) for space-constrained designs. Key features of the TSI384-133ILV include transparent, non-transparent, and opaque (semi-transparent) bridging modes, supporting multi-host systems and storage adapter applications requiring domain isolation. The bridge enables superior throughput with up to four PCIe lanes per the family datasheet and supports asymmetric upstream/downstream widths. Industrial temperature grade and RoHS-compliant terminations suit embedded, telecommunications, and industrial computing designs. Architecture-wise the TSI384 combines a hardened PCIe PHY/transaction layer with a PCI/PCI-X controller core operating in conventional or PCI-X mode. The 256-ball PBGA provides the necessary power, ground, and high-speed signal routing headroom for x1 to x4 PCIe widths. Operating supply voltage is 1.2 V core plus I/O rails, supplied via multiple pins. Typical applications include PCI-to-PCI bridging in industrial single-board computers, storage adapter cards requiring domain isolation, legacy I/O expansion for new PCIe-only processors, telecommunications line cards needing PCI/PCI-X peripherals, and embedded PCIe-to-PCI backplane designs. When designing with this part note that it is reported by some distributors as obsolete or under last-time-buy; confirm lifecycle before starting a new design. Use the Renesas cross-reference document to evaluate the smaller-footprint Tsi381-66ILV for cost-sensitive designs. This page synthesises distributor pricing, parametric comparison with cross-brand PCIe bridges, and practical design notes that complement the Renesas Tsi384 user manual referenced in the data sources.

RFQ پەیوەندی
TUSB1002RGER - 10Gbps Dual USB 3.1 Redriver | Texas Instruments
TUSB1002RGER

TUSB1002RGER - 10Gbps Dual USB 3.1 Redriver | Texas Instruments

The Texas Instruments TUSB1002RGER is a 10 Gbps dual-channel linear USB 3.1 redriver and signal conditioner in a 24-VQFN package measuring 4 x 4 mm. It operates from a 3.3 V supply, supports USB 3.1 SuperSpeedPlus signal rates, and can compensate for up to 16 dB of Inter-Symbol Interference loss. Its two-channel architecture allows one device to condition both sides of a USB link or two independent USB 3.1 paths. A linear redriver is a type of USB signal conditioner that receives a degraded high-speed differential signal, restores its amplitude and timing margin, and retransmits the signal toward the next USB device. In the broader electronics hierarchy, a redriver belongs to the interface IC and signal-conditioning categories, where it complements controllers, hubs, transceivers, and retimers by recovering connectivity over cables, connectors, and printed circuit board traces. The TUSB1002 uses a linear equalizer to address high-frequency attenuation. According to the Texas Instruments product information, it supports up to 16 dB of loss caused by Inter-Symbol Interference. The device also implements USB 3.1 low-power modes and an ultra-low-power architecture, helping reduce consumption during idle operation. Its 3.3 V supply requirement and 10 Gbps throughput suit equipment requiring long reaches between a USB host or hub and a peripheral. The dual-channel arrangement gives designers flexibility for link-to-link signal conditioning. Each channel can be evaluated and configured for its own PCB or cable path, while common package placement simplifies routing around USB connectors. As a linear device, it preserves the signal waveform while improving amplitude; unlike a protocol-aware retimer, it does not need to recover and reconstruct USB timing at a data rate of 10 Gbps. Typical uses include USB 3.1 docking stations, laptop and tablet accessories, external storage enclosures, industrial test equipment, servers, and data-acquisition systems. It is particularly useful when connector or PCB losses threaten eye closure between a USB host controller and an endpoint device. Place the redriver close to the loss-producing connector or trace segment and follow the manufacturer datasheet's reference layout for high-speed differential routing. Decoupling, impedance control, return-path continuity, and the device's documented layout requirements are essential because an incorrectly positioned redriver can add loss rather than recover margin. This page combines the manufacturer product description with engineering-oriented application analysis, design guidance, lifecycle considerations, and a strict review of drop-in replacement candidates. It is intended to help engineers determine whether the TUSB1002RGER fits a 10 Gbps USB 3.1 channel before committing it to a high-speed PCB layout.

RFQ پەیوەندی
TUSB1105RGTR - USB 2.0 Transceiver | Texas Instruments
TUSB1105RGTR

TUSB1105RGTR - USB 2.0 Transceiver | Texas Instruments

Texas Instruments TUSB1105RGTR is a single-channel USB 2.0 transceiver for full-speed and low-speed signaling, supporting 12 Mbit/s and 1.5 Mbit/s data rates in a 16-pin VQFN package measuring 3 mm by 3 mm. The device provides one transceiver path, integrates transmit and receive functions, and is designed for compact USB interface implementations. A universal serial bus transceiver is an interface circuit that converts logic-level data into USB-compatible differential signaling and converts received differential signals back into digital logic. The TUSB1105 belongs to the USB interface IC hierarchy, where USB transceivers connect a host, peripheral, or embedded controller to a USB connector while providing the physical-layer signaling required by USB 2.0 devices. The principal features include compliance with the Universal Serial Bus Specification Revision 2.0, full-speed operation at 12 Mbit/s, low-speed operation at 1.5 Mbit/s, and a half-duplex 1/1 transceiver configuration. Its 16-VQFN package is 3 mm by 3 mm, making the device suitable for space-constrained portable, industrial, and embedded USB equipment. The exposed-pad package also supports compact PCB layouts when its land pattern and thermal design are implemented correctly. The TUSB1105 is intended for external USB connectivity rather than direct USB data signaling across a long cable or printed circuit board. Its transmit and receive path handles the USB differential interface, while the connected USB controller or embedded processor performs protocol handling. This division keeps low-level signaling separate from the higher layers of USB enumeration, descriptors, classes, and transfers. Typical uses include USB-to-serial adapters, portable test and measurement equipment, industrial control panels, data-collection terminals, and accessory controllers that need a compact full-speed or low-speed USB interface. For designs that expose a USB Type-A or USB Type-B receptacle, the transceiver should be paired with the appropriate connector, protection network, routing geometry, and controller-specific interface requirements. PCB implementation requires careful treatment of the differential USB pair, the exposed ground pad, and the short connection between the transceiver and connector. Maintain a continuous ground reference, route D+ and D+ together and D− and D− together, and minimize stubs and unnecessary vias. Confirm the final layout against the pin-description and layout guidance in the manufacturer datasheet. This page combines the confirmed USB 2.0 speed ratings, package information, drop-in replacement findings, interface-selection guidance, and practical PCB considerations into a compact engineering reference for USB transceiver designs.

RFQ پەیوەندی
TUSB1106PWR USB 2.0 Transceiver | Texas Instruments
TUSB1106PWR

TUSB1106PWR USB 2.0 Transceiver | Texas Instruments

The Texas Instruments TUSB1106PWR is a single-channel USB transceiver for Universal Serial Bus applications, supporting full-speed operation at 12 Mbit/s and low-speed operation at 1.5 Mbit/s. The device is compliant with the Universal Serial Bus Specification Revision 2.0 and is packaged in a 16-pin TSSOP (PW) package. It integrates the digital transceiver functions required for a USB host, device, or peripheral interface. A USB transceiver is an interface integrated circuit that converts between a host controller or peripheral controller’s digital signaling and the physical D+ and D- differential pair used by USB. In the broader electronics hierarchy, the TUSB1106 belongs to the USB interface IC family, interface transceivers, and power-management-aware connectivity semiconductors. It provides the physical-layer path for exchanging serial data and detecting bus state in USB 2.0 systems. The TUSB1106 family supports both full-speed and low-speed USB data rates. Full-speed operation provides a higher-rate communication option for peripherals that require more throughput, while low-speed operation supports devices with modest bandwidth requirements and suitable device-state behavior. USB 2.0 Revision 2.0 compliance is specifically identified for the TUSB1105 and TUSB1106 transceivers by Texas Instruments. The TUSB1106PWR is a half-duplex, one-channel transceiver, matching the “1/1 Transceiver Half” device description shown in the product listing. Its differential USB data interface connects to the external data and power behavior of the USB link, while control and configuration pins support integration into host or peripheral designs. The single USB channel makes the device appropriate for compact equipment, industrial control modules, embedded systems, and accessory interfaces that require one USB physical transceiver. Typical design locations include USB host controllers, USB peripheral controllers, portable test equipment, industrial interface cards, and embedded USB-to-serial or USB communication subsystems. The device should be placed near the USB connector so that the high-speed differential traces remain short, continuous, and impedance controlled. Connector-side protection, proper D+ and D- routing, and compliance with the USB signal-integrity requirements are more important than adding unrelated circuit functions. When designing a replacement circuit, verify the complete pin description, electrical limits, operating-temperature range, and USB compliance requirements against the manufacturer datasheet. The principal engineering trade-off is that this device supports USB 2.0 full-speed and low-speed signaling rather than USB high-speed operation at 480 Mbit/s. For new designs that require high-speed USB data rates, select a transceiver explicitly specified for that speed instead. This page organizes the verified manufacturer and distributor information into an engineering-oriented view covering USB data rates, package format, application fit, comparison criteria, and practical design guidance. The package and interface hierarchy are emphasized so engineers can identify whether the TUSB1106PWR matches the intended USB physical-layer design.

RFQ پەیوەندی
TUSB1106RTZR - USB 2.0 Half-Speed Transceiver | TI
TUSB1106RTZR

TUSB1106RTZR - USB 2.0 Half-Speed Transceiver | TI

Texas Instruments TUSB1106RTZR is a half-speed USB 2.0 transceiver that transmits and receives serial data at both 12 Mbit/s full-speed and 1.5 Mbit/s low-speed rates. The device is packaged in a 16-pin WQFN (RTZ) 3 x 3 mm surface-mount package and includes an integrated bypassable 3.3 V regulator for powering devices from USB VBUS. A USB transceiver is an interface IC that translates logic-level data between a host or hub and a USB peripheral. It belongs to the USB interface transceiver class within the broader interface IC and semiconductor hierarchy. This dual-rate capability allows one device to support both full-speed and low-speed USB links, making it useful in peripheral controllers, portable equipment, industrial interfaces, and legacy USB connectivity designs. The TUSB1106 is compliant with the Universal Serial Bus Specification Revision 2.0. Its principal data-rate ratings are 12 Mbit/s for full-speed operation and 1.5 Mbit/s for low-speed operation. The integrated 3.3 V regulator can be bypassed, giving the system designer a choice between using VBUS-derived power and controlling the regulator enable function. The 16-WQFN package supports compact surface-mount layouts while providing an exposed pad for improved board-level thermal performance. Operation at both USB speed rates expands compatibility with USB peripherals that use full-speed or low-speed signaling. The half-speed transceiver architecture implements one transmit path and one receive path, while the integrated regulator reduces the number of external power-management functions required around a USB peripheral. Designers must still account for USB data-line impedance, ESD protection, connector routing, and the regulator bypass configuration in the system schematic. Typical uses include USB-to-serial bridges, embedded USB peripherals, portable data-acquisition equipment, industrial control interfaces, and USB connectivity for legacy full-speed or low-speed devices. The compact 3 x 3 mm package is particularly useful when board area is constrained but a full USB interface is required without relying on a larger host-side controller. For PCB implementation, route D+ and D+ as a controlled-impedance differential pair, connect the data lines according to the manufacturer's reference layout, and place ESD protection close to the connector. Decouple the 3.3 V output according to the device's recommended capacitor network and verify whether the integrated regulator should be bypassed for the selected power architecture. This product page combines the manufacturer's USB 2.0 compliance information, exact package and temperature details, commercial sourcing guidance, and an analysis of same-footprint alternatives to support faster component selection and PCB design.

RFQ پەیوەندی
TUSB1146RNQR - 10Gbps USB-C Redriver/MUX | Texas Instruments
TUSB1146RNQR

TUSB1146RNQR - 10Gbps USB-C Redriver/MUX | Texas Instruments

The Texas Instruments TUSB1146RNQR is a USB Type-C crosspoint switch and protocol-agnostic linear redriver supporting USB 3.2 data rates up to 10 Gbps and VESA DisplayPort 2.0 up to 10 Gbps. The device is available in a 40-pin WQFN package measuring 6 mm by 4 mm, with an operating temperature range of 0 °C to 70 °C. It supports USB 3.2 SuperSpeed Plus, two DisplayPort lanes, four DisplayPort lanes, and DisplayPort D_DFP pin assignments C, D, and E. A USB Type-C alternate-mode redriver/MUX is an interface IC that routes high-speed signals between a USB Type-C connector and downstream or host circuitry while compensating for channel loss. It belongs to the signal-conditioning hierarchy of USB interface controllers, redrivers, repeaters, crosspoint switches, and interface ICs. By regenerating and equalizing marginal signals, the TUSB1146 supports reliable high-speed links over longer traces, connectors, cables, or board-to-board transitions than might be possible with passive routing alone. The TUSB1146 supports USB 3.2 Gen 1 and Gen 2 operation up to 10 Gbps, two-lane and four-lane DisplayPort configurations, and DisplayPort 2.0 UHBR10 signaling up to 10 Gbps. Its adaptive equalization adapts the receive equalization to the connected channel. The protocol-agnostic architecture also allows the device to support non-DisplayPort USB Type-C alternate modes such as HDMI Alternate Mode. In a downstream-facing host port, the TUSB1146 functions as a linear redriver for selected USB Type-C SuperSpeed and DisplayPort lanes. Adaptive equalization helps restore signal margin when connector or PCB losses reduce eye opening. The linear redriver architecture is particularly useful where designers need signal regeneration without introducing a protocol-specific conversion stage between the Type-C port and the downstream interface. Typical uses include USB-C docking stations, laptop and tablet docks, multiport adapters, monitor docks, video-capture systems, and industrial USB-C equipment. The D_DFP C, D, and E assignments broaden compatibility with DisplayPort Alternate Mode routing requirements. Systems requiring additional lane routing, conversion, or protocol features should confirm the complete pin configuration and application circuit in the manufacturer datasheet before layout release. Layout is critical in a 10 Gbps redriver design. Route the high-speed differential pairs as controlled-impedance, tightly coupled traces with minimal stubs and continuous reference planes. Place bypass capacitors close to the supply pins, keep the exposed pad thermally and electrically connected as specified, and follow the manufacturer’s recommended layer transitions and return-path guidance to minimize differential-mode and common-mode conversion. This product page combines interface classification, application guidance, design cautions, and structured comparison fields to support faster engineering review. It also separates confirmed TUSB1146RNQR characteristics from parameters that still require inspection of the manufacturer datasheet, helping designers avoid assuming unsupported pin, electrical, or compliance details.

RFQ پەیوەندی
TUSB1146RNQT - 10Gbps USB-C Alt Mode Redriver | TI
TUSB1146RNQT

TUSB1146RNQT - 10Gbps USB-C Alt Mode Redriver | TI

The Texas Instruments TUSB1146RNQT is a protocol-agnostic USB Type-C Alt Mode redriver and crosspoint switch that supports USB 3.2 data rates up to 10 Gbps and DisplayPort 2.0 up to 10 Gbps. The device is housed in a 40-pin WQFN package measuring 6 mm by 4 mm and is intended for downstream-facing host ports. A USB Type-C Alt Mode redriver is an interface IC that conditions high-speed differential signals between a USB Type-C controller and a connector or peripheral. It supports loss compensation for USB, DisplayPort, and other protocol-agnostic Alt Mode lanes. The TUSB1146 occupies the redriver, multiplexing, and signal-conditioning stages of a USB Type-C power and data interface. The TUSB1146 supports USB 3.2 SuperSpeed signals at up to 10 Gbps and VESA DisplayPort 2.0 at up to 10 Gbps, or UHBR10. It supports USB 3.2 x1 Gen 1 and Gen 2, USB 3.2 SSP, two DisplayPort lanes, and four DisplayPort lanes. Its protocol-agnostic architecture also permits use with other USB Type-C Alt Mode interfaces, including HDMI Alt Mode. The TUSB1146 provides adaptive equalization to compensate for channel loss encountered through PCB traces, connectors, and cables. Its crosspoint-switch architecture supports configurable lane routing for USB and DisplayPort Alt Mode. The manufacturer identifies support for DisplayPort D_DFP pin assignments C, D, and E, making it suitable for systems that require multiple high-speed lane arrangements in a compact host interface. Typical uses include USB-C docking stations, multi-display adapters, notebook and tablet systems, desktop hosts, video-over-USB-C equipment, and industrial data-acquisition systems. The device is particularly relevant where cable or PCB losses could compromise 10 Gbps signal integrity but the host and connector placement cannot be shortened enough to eliminate the loss. When laying out a design, preserve the high-speed signal paths as short and symmetric as possible, provide the reference-plane and return-path structures required by the manufacturer recommendations, and place bypass capacitance close to the supply pins. Differential pair geometry and connector launch transitions are especially important at 10 Gbps because the redriver compensates for loss but cannot remove reflections caused by an inconsistent PCB structure. This page combines the TUSB1146RNQT protocol and package details, application guidance, sourcing information, and a strict assessment of available drop-in replacements. It is intended to help engineers confirm protocol coverage, mechanical fit, thermal expectations, and signal-integrity requirements before integrating the redriver into a USB Type-C Alt Mode design.

RFQ پەیوەندی
TUSB1310AZAY - 5 Gbps USB 3.0 Transceiver | Texas Instruments
TUSB1310AZAY

TUSB1310AZAY - 5 Gbps USB 3.0 Transceiver | Texas Instruments

Texas Instruments TUSB1310AZAY is a single-port SuperSpeed USB 3.0 physical-layer transceiver with a 5.0 Gbps data rate, PIPE and ULPI interfaces, and a 175-NFBGA package measuring 12 x 12 mm. It operates from one selectable reference clock at 20, 25, 30, or 40 MHz and can provide that clock to a USB controller. A USB 3.0 transceiver is an interface IC that connects a USB controller or host to a SuperSpeed data link. It forms part of the hierarchy USB interface device, transceiver, interface IC, and semiconductor. Unlike a passive connector, the transceiver converts parallel controller data into high-speed differential signaling and receives differential signal information for the controller. The TUSB1310A also supports PIPE and ULPI interfaces, allowing it to connect with controllers that use either interface style. Principal features include one USB 3.0 port, a 5.0 Gbps maximum data rate, four selectable reference-clock frequencies, and integrated USB power-state handling. The USB 3.0 power states named in the manufacturer documentation are U0, U1, U2, and U3. The PIPE specification defines P0, P1, P2, and P3, while the POWER_DOWN pin is mapped to LTSSM states as described in the manufacturer datasheet. The device operates from a single reference clock supplied by either a crystal or an external clock source. The manufacturer describes the 20, 25, 30, and 40 MHz selection as enabling a cost-effective USB 3.0 implementation with few external components. Because the transceiver can provide the reference clock to the USB controller, the design can reduce the number of independent clock sources required on the board. Typical uses include USB 3.0 host-controller systems, USB device controllers, external data-transfer equipment, test and measurement products, and embedded computing platforms that require a SuperSpeed interface. The PIPE and ULPI choices are particularly useful when a system already has a controller designed around one of those interfaces. The 175-NFBGA package also supports compact layouts where the electrical and thermal design can be controlled carefully. When implementing the TUSB1310AZAY, follow the manufacturer datasheet for high-speed differential routing, reference-clock configuration, supply decoupling, ball assignment, and test-point access. Its 12 x 12 mm BGA footprint requires careful escape routing and multilayer PCB planning. Confirm that the selected controller supports the intended PIPE or ULPI mode and verify the complete USB link-training sequence during hardware validation. This page consolidates the exact ordering information, interface capabilities, clock choices, package details, replacement information, and engineering design considerations for engineers evaluating a USB 3.0 SuperSpeed physical-layer implementation.

RFQ پەیوەندی
TUSB1310ZAY - 5Gbps USB 3.0 Transceiver | Texas Instruments
TUSB1310ZAY

TUSB1310ZAY - 5Gbps USB 3.0 Transceiver | Texas Instruments

The Texas Instruments TUSB1310ZAY is a single-port, 5.0-Gbps USB 3.0 SuperSpeed physical-layer transceiver with PIPE3 and ULPI interfaces, packaged in a 175-ball NFBGA measuring 12 x 12 mm. It accepts a single crystal or external reference clock and can supply a clock to a USB link-layer controller. According to the manufacturer product page, selectable reference-clock frequencies include 20, 25, 30, and 40 MHz, supporting integration into USB 3.0 systems that require a consolidated physical-layer and controller-interface solution. A USB 3.0 SuperSpeed transceiver is the interface device that converts between a host or device controller and the physical USB data path. It belongs to the USB interface IC hierarchy, connects to digital logic through PIPE3 or ULPI, and handles the high-speed physical signaling required by the USB 3.0 protocol. The TUSB1310 therefore sits between a USB link-layer controller and the external connector, power, clock, and signal-routing network. The principal documented features are one USB 3.0 transceiver port, a 5.0-Gbps operating speed, support for both PIPE3 and ULPI controller interfaces, and operation from either a crystal oscillator or an external reference clock. Its four documented reference-clock choices allow the system designer to select a clock appropriate to the controller ecosystem. The device can also provide a clock to the USB link-layer controller, reducing the number of separate clocking arrangements considered in a reference design. The TUSB1310ZAY uses a 175-NFBGA package, identified by the ordering code as a 12 x 12 mm device. This dense ball-grid arrangement is intended for compact systems requiring numerous high-speed connections. Placement is a signal-integrity-critical task because USB 3.0 differential pairs demand short, length-matched routing, appropriate reference planes, and carefully controlled return paths. The transceiver’s interface selection also affects host-versus-device implementation and determines how the controller-facing pins are connected. Typical applications include USB 3.0 docking stations, high-speed data-transfer products, storage systems, test equipment, and embedded computing platforms that use a USB link-layer controller. The transceiver can suit designs requiring either PIPE3 connectivity for parallel controller integration or ULPI connectivity for a compact register-oriented interface. It is particularly relevant where a system needs one USB 3.0 port and a selectable reference-clock arrangement rather than a multi-port hub transceiver. When designing around the TUSB1310ZAY, verify the complete pin configuration, electrical limits, crystal or reference-clock requirements, and decoupling recommendations in the manufacturer datasheet before releasing PCB artwork. High-speed differential routing should be validated against the controller and connector reference designs because package placement, via transitions, layer stackup, and clock jitter can materially affect signal integrity. This page organizes the documented TUSB1310ZAY capabilities, package information, interface options, engineering applications, and confirmed same-package alternatives. It also highlights where a manufacturer data sheet must remain the controlling reference for pin assignment, compliance, environmental limits, and layout implementation.

RFQ پەیوەندی