بەرهەمەکان (5,100+)

USB4640I-HZH-03 - USB 2.0 HSIC Hub Controller | Microchip
USB4640I-HZH-03

USB4640I-HZH-03 - USB 2.0 HSIC Hub Controller | Microchip

The Microchip Technology USB4640I-HZH-03 is a high-speed USB 2.0 hub and flash media controller with an HSIC interface, packaged in a 48-QFN 7 x 7 mm package. It is designed for systems that need an integrated USB hub and removable-media interface, including cell phones, GPS equipment, personal computers, printers, and set-top boxes. The order code identifies the industrial-temperature version, HZH 48-QFN package, and internal ROM firmware revision 03. A USB hub controller is an interface integrated circuit that manages one host USB connection and expands it into multiple USB ports or coordinates an internal USB 2.0 route. The USB4640I belongs to the broader USB interface controller, peripheral interface IC, and semiconductor hierarchy. Its HSIC connection provides a high-speed path between a host processor and the internal hub logic, reducing the need for discrete hub-controller circuitry while supporting USB 2.0 devices. Key characteristics include high-speed inter-chip USB 2.0 hub operation, integrated flash-media-controller capability, a 48-QFN lead-free package, and industrial-temperature ordering. The -03 suffix denotes internal ROM firmware revision 03, so firmware revision compatibility matters when replacing the device. The manufacturer documentation identifies USB4640 and USB4640i devices as high-speed inter-chip USB 2.0 hub and flash media controllers intended for embedded portable and consumer-equipment designs. The controller combines hub and media-interface functions in one package. This integration can simplify board planning for systems requiring USB connectivity to external peripherals and flash storage. Its 48-QFN package also supports compact layouts, although correct land-pattern construction, exposed-pad soldering, and clean high-speed routing remain essential. The package's exposed thermal pad provides an electrical and thermal connection when the manufacturer's footprint and assembly guidance are followed. Typical uses include portable navigation equipment, cellular phones, personal-computer peripherals, printers, set-top boxes, and other embedded systems that expose USB ports. In a printer or set-top box, the controller can coordinate an internal USB 2.0 route and external device connections. In portable equipment, it can combine USB hub control with flash-media interface requirements while preserving a compact board footprint. The primary design consideration is firmware and PCB compatibility. A replacement should match the 48-QFN footprint, pin arrangement, HSIC architecture, USB 2.0 behavior, temperature grade, and ROM revision. USB routing should follow differential-pair layout practices, while the QFN thermal pad requires a compliant solder pattern and adequate copper for heat transfer. This product summary connects the Microchip manufacturer datasheet, package information, ordering-code details, and verified catalog records with practical guidance for USB interface design, firmware-sensitive replacement, and embedded USB hub integration.

RFQ پەیوەندی
USB4640I-HZH-03-TR - USB 2.0 HSIC Hub Controller | Microchip (Tape & Reel)
USB4640I-HZH-03-TR

USB4640I-HZH-03-TR - USB 2.0 HSIC Hub Controller | Microchip (Tape & Reel)

The Microchip Technology USB4640I-HZH-03-TR is a high-speed USB 2.0 hub and flash media controller with an HSIC interface, packaged in a 48-QFN 7 x 7 mm package. It is designed for systems that need an integrated USB hub and removable-media interface, including cell phones, GPS equipment, personal computers, printers, and set-top boxes. The order code identifies the industrial-temperature version, HZH 48-QFN package, and internal ROM firmware revision 03. A USB hub controller is an interface integrated circuit that manages one host USB connection and expands it into multiple USB ports or coordinates an internal USB 2.0 route. The USB4640I belongs to the broader USB interface controller, peripheral interface IC, and semiconductor hierarchy. Its HSIC connection provides a high-speed path between a host processor and the internal hub logic, reducing the need for discrete hub-controller circuitry while supporting USB 2.0 devices. Key characteristics include high-speed inter-chip USB 2.0 hub operation, integrated flash-media-controller capability, a 48-QFN lead-free package, and industrial-temperature ordering. The -03 suffix denotes internal ROM firmware revision 03, so firmware revision compatibility matters when replacing the device. The manufacturer documentation identifies USB4640 and USB4640i devices as high-speed inter-chip USB 2.0 hub and flash media controllers intended for embedded portable and consumer-equipment designs. The controller combines hub and media-interface functions in one package. This integration can simplify board planning for systems requiring USB connectivity to external peripherals and flash storage. Its 48-QFN package also supports compact layouts, although correct land-pattern construction, exposed-pad soldering, and clean high-speed routing remain essential. The package's exposed thermal pad provides an electrical and thermal connection when the manufacturer's footprint and assembly guidance are followed. Typical uses include portable navigation equipment, cellular phones, personal-computer peripherals, printers, set-top boxes, and other embedded systems that expose USB ports. In a printer or set-top box, the controller can coordinate an internal USB 2.0 route and external device connections. In portable equipment, it can combine USB hub control with flash-media interface requirements while preserving a compact board footprint. The primary design consideration is firmware and PCB compatibility. A replacement should match the 48-QFN footprint, pin arrangement, HSIC architecture, USB 2.0 behavior, temperature grade, and ROM revision. USB routing should follow differential-pair layout practices, while the QFN thermal pad requires a compliant solder pattern and adequate copper for heat transfer. This product summary connects the Microchip manufacturer datasheet, package information, ordering-code details, and verified catalog records with practical guidance for USB interface design, firmware-sensitive replacement, and embedded USB hub integration.

RFQ پەیوەندی
USB5742/2G - 2-Port SS/HS USB 3.1 SmartHub Controller | Microchip
USB5742/2G

USB5742/2G - 2-Port SS/HS USB 3.1 SmartHub Controller | Microchip

The Microchip USB5742/2G is a 2-port, low-power SuperSpeed/Hi-Speed USB 3.1 Gen 1 SmartHub hub feature controller with 2 downstream ports, housed in a 56-pin VQFN (7x7 mm) package with exposed thermal pad. It supports USB 3.1 SuperSpeed (5 Gbps), USB 2.0 Hi-Speed (480 Mbps), Full-Speed (12 Mbps), and Low-Speed (1.5 Mbps) downstream traffic, and includes SPI/SMBus configuration interfaces for OEM-flexible firmware customization. A SmartHub is a USB hub controller IC with integrated bridge logic and configurable firmware that adds value features beyond the basic USB hub function defined by the USB-IF. As a category, SmartHub belongs to the USB Interface IC family (a subset of Interface ICs > Integrated Circuits), sitting between root hosts and downstream USB peripherals and providing functions such as port-power switching, per-port enable, programmable GPIO, and flexible upstream port mapping. The USB5742 specifically implements Microchip's fifth-generation USB 2.0 hub feature controller operating in parallel with a SuperSpeed transaction translator, decoupling 5 Gbps SuperSpeed signalling from legacy 480 Mbps traffic and removing the legacy FS/LS signalling bottleneck of older USB-IF transaction translator rules. Key features include full USB Battery Charging v1.2 support including CDP/DCP modes, integrated 5 V VBUS switch drivers with per-port overcurrent protection, USB Link Power Management (LPM) Addendum compliance for U1/U2/U3 low-power states, role-swapping for reversible Type-C wiring, and Microchip's proprietary Multi-Transaction Translator (Multi-TT) for full 480 Mbps bandwidth on all downstream ports simultaneously. The device operates from a single 3.3 V supply, integrates a 5 V to 3.3 V regulator for internal logic, and the -40C to +85C industrial temperature grade supports embedded OEM use. Typical applications include two-port docking stations, embedded USB expansion for industrial PCs, automotive rear-seat USB chargers, USB Type-A wall chargers with smart-charging, and head-unit infotainment connectivity modules. The SPI host interface allows an external MCU to enumerate attached devices, customize charging profiles, and read port events. When designing with the USB5742/2G, ensure the 56-VQFN exposed pad is properly soldered to a contiguous ground plane of at least 1 square inch to meet the 90 mA unconfigured VBUS-current budget. Bypass the 3.3 V rail with 10 uF + 100 nF ceramic capacitors placed within 5 mm of the supply pin, and follow USB-IF HS/SS routing rules (90-ohm differential impedance, intra-pair skew under 15 ps). This page synthesizes distributor pricing, drop-in equivalent SmartHub alternatives, and practical layout guidance not found in the standalone manufacturer datasheet.

RFQ پەیوەندی
USB5807C-I/KD - 7-Port USB 3.2 Gen 1 SmartHub IC | Microchip
USB5807C-I/KD

USB5807C-I/KD - 7-Port USB 3.2 Gen 1 SmartHub IC | Microchip

The Microchip USB5807C-I/KD is a 7-port, SuperSpeed USB 3.2 Gen 1 SmartHub IC delivering 5 Gbps downstream bandwidth, housed in a 100-pin VQFN EP (12x12 mm) package with industrial temperature grade (-40C to +85C). It supports USB Type-C with integrated USB-C MUX logic, I2C and SPI management interfaces, and Microchip's MultiTRAK, ProTouch, and PortSwap signal-integrity features. A SmartHub is a USB hub that integrates system-level functions typically performed by a separate MCU or processor. In a typical USB topology, a hub sits between the host (root port) and downstream devices, repeating the differential data and managing power and protocol states. The SmartHub class adds vendor configuration, role-swap (USB-C DRP), GPIOs, and optional firmware-driven behaviors that offload the system processor, which is critical in space-constrained embedded designs. The USB5807C family sits in Microchip's hub-controller hierarchy above the USB251x 2.0-only hubs and below larger 10-port parts like the USB5744. Key features include full USB 3.2 Gen 1 (formerly 3.1 Gen 1 / USB 3.0) 5 Gbps SuperSpeed plus USB 2.0 High-Speed/Full-Speed/Low-Speed backward compatibility on all 7 enabled downstream ports, integrated FlexConnect role-swap, per-port battery charging support (BC1.2), and unique 1.2V/3.3V dual-rail operation that simplifies internal rail generation. Per-port USB-C MUX integration eliminates external crossbar switches, reducing BOM cost and PCB area in USB-C docking designs. Architecturally, the device combines a SuperSpeed USB 3.2 Gen 1 physical layer (PHY), a USB 2.0 PHY, an embedded microcontroller for hub repeater logic, configuration ROM/OTP, and an I2C/SPI slave for host MCU management. The 100-VQFN exposed-pad package provides thermal dissipation suitable for industrial ambient operation without external heatsinking. Typical applications include USB-C docking stations, automotive head-unit USB hubs, thin-client monitors with embedded USB, USB-C monitors, embedded industrial PCs, and any USB-C multiport expansion where role-swap and charging are required. The 12x12 mm VQFN with 0.4 mm pitch is footprint-compatible with the USB5744 family for tier-up/down design reuse. When designing with this device, allocate a 4-layer PCB stack-up to maintain 90 ohm differential impedance for SuperSpeed lanes. Decouple both the 1.2V core and 3.3V I/O rails with 100 nF plus 4.7 uF ceramic capacitors placed within 2 mm of the supply pins. The exposed pad MUST be soldered to a continuous ground plane via a 5x5 thermal via array. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical PCB layout notes that are not consolidated in the manufacturer datasheet alone, giving engineers a single reference for design-in decisions.

RFQ پەیوەندی
USB5807CT/KD - 7-Port USB 3.2 Gen 1 SmartHub, VQFN-100 | Microchip
USB5807CT/KD

USB5807CT/KD - 7-Port USB 3.2 Gen 1 SmartHub, VQFN-100 | Microchip

The Microchip USB5807CT/KD is a 7-port, SuperSpeed (SS) USB 3.2 Gen 1 SmartHub controller IC delivered in a 100-pin VQFN (12 mm x 12 mm) package with exposed thermal pad. It is USB-IF compliant under TID1595 against the USB 3.2 Gen 1 specification, supports 5 Gbps Super-Speed plus 480 Mbps Hi-Speed, 12 Mbps Full-Speed, and 1.5 Mbps Low-Speed USB signaling, and exposes I2C/SPI host management interfaces for OEM configuration. Operating supply range is 1.08 V to 3.3 V with an operating temperature window of 0 C to +70 C for the commercial CT suffix variant. A USB hub controller is a specialized interface IC that aggregates one upstream USB port into multiple downstream ports while handling the protocol stack, port power management, and traffic scheduling. SmartHubs add OEM-configurable firmware layers (MultiTRAK, flexPORT, PortSplit) on top of the standard hub state machine, enabling per-port behavior tuning, custom charging profiles, and signal-integrity adjustments without external logic. Within the broader IC hierarchy, USB5807CT/KD belongs to Interface ICs > USB Hubs > USB 3.x Hub Controllers > Power-Managed SmartHub family. Key features include 7 downstream ports configurable as USB 3.2 Gen 1 or USB 2.0, native USB Type-C support via integrated MUX logic, MultiTRAK and PortSplit technology for per-port tuning, I2C and SPI host management interfaces, and Broadcom/Microchip-proprietary low-power states with optimized thermal dissipation. The VQFN-100 package provides a compact 12 mm x 12 mm footprint suitable for embedded designs and dock/monitor applications where board area is constrained. The device uses a low-power architecture with embedded USB 3.x PHYs and a configurable hub feature ROM accessed via SPI. PortSplit allows simultaneous USB 3.x and USB 2.0 operation on the same downstream port, enabling embedded USB 3.x peripherals alongside legacy USB 2.0 devices without external muxes. Driver compatibility covers Microsoft Windows 10/8/7/XP, Apple OS X 10.4+, and mainstream Linux hub drivers, removing the need for custom host stacks. Typical applications include USB-C docking stations, multi-port USB hubs, monitors with integrated USB expansion, embedded industrial USB fan-out, and Type-C breakout boards. Choose USB5807CT/KD when a 7-port SS hub with OEM-tunable power/charging profiles is required in a thermally-constrained enclosure. When designing with this part, ensure adequate copper area under the exposed pad and route SuperSpeed pairs with 90 ohm differential impedance. The host MCU must configure PortSplit, flexPORT, and charging parameters via I2C/SPI before downstream ports enumerate at full capability. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that complement (but do not replace) the manufacturer datasheet DS00002237D and Microchip configuration tools.

RFQ پەیوەندی
USB7056-I/KDX - 6-Port USB 3.2 Gen1 PD SmartHub | Microchip
USB7056-I/KDX

USB7056-I/KDX - 6-Port USB 3.2 Gen1 PD SmartHub | Microchip

The Microchip USB7056-I/KDX is a low-power, OEM-configurable 6-port USB 3.2 Gen 1 PD SmartHub controller in a 100-pin VQFN (12x12 mm) package with industrial temperature rating. It integrates a SuperSpeed USB 3.2 Gen 1 hub with native USB Type-C support, a legacy USB 2.0 hub for HS/FS/LS operation, and an on-board USB Power Delivery (PD) controller, providing 6 downstream ports with one Type-C upstream and five Type-A downstream configuration in the KDX pinout. A USB hub controller (USB 3.0/3.2 Gen 1 hub) is a semiconductor device that expands a single upstream USB port into multiple downstream ports, while managing enumeration, power, and protocol translation. The USB hub sits within the broader USB connectivity IC hierarchy: USB hub controller -> USB interface IC -> connectivity semiconductor -> IC. SmartHub variants add on-board PD negotiation and Type-C cable-orientation logic, eliminating the need for an external PD controller in Type-C sink/source designs. Key features include USB 3.2 Gen 1 (5 Gbps) SuperSpeed with native Type-C support, integrated USB PD 3.0 controller, broad host interfaces (GPIO, I2C, I2S, SPI, UART) for peripheral control, flexible GPIOs for status and indicators, integrated 5V LDO regulators for downstream VBUS, and support for battery charging (BC1.2) on each downstream port. The KDX suffix denotes the specific 100-VQFN lane mapping optimized for Type-C + 5x Type-A embedded designs. Architecturally, the USB7056 uses Microchip's sixth-generation hub architecture with separate USB 2.0 and USB 3.2 physical layers, an embedded 32-bit microcontroller for hub policy and Power Delivery state machines, and per-port PHYs. The internal USB-IF certified hub repeater provides proven interoperability and BC1.2 CDP/SDP/DCP charging modes are configurable per port. Typical applications include industrial USB Type-C docking stations, USB-C monitors and KVM switches, embedded USB expansion on single-board computers, automotive infotainment USB subsystems, POS terminals with multi-port charging, and medical imaging USB concentrators. Design considerations center on PCB routing of the 5 Gbps SuperSpeed differential pairs, thermal management of the 100-pin VQFN, and proper Type-C CC/SBU routing. When designing with the USB7056, allow clean reference clock routing (25 MHz crystal) and follow USB-IF High-Speed layout guidelines for the SuperSpeed differential pairs; place the upstream Type-C connector within 50 mm of the hub to preserve signal integrity. The industrial temperature grade (-40C to +85C) suits ruggedized and automotive-grade enclosures. This page synthesizes distributor pricing, same-brand drop-in alternatives, and practical design guidance not aggregated on the manufacturer datasheet.

RFQ پەیوەندی
USB7206C-I/KDX - 6-Port USB 3.2 Gen 2 SmartHub Controller | Microchip
USB7206C-I/KDX

USB7206C-I/KDX - 6-Port USB 3.2 Gen 2 SmartHub Controller | Microchip

The Microchip USB7206C-I/KDX is a low-power, OEM-configurable USB 3.2 Gen 2 hub controller with 6 downstream ports (5x USB 3.1 + 1x USB 2.0), housed in a 100-pin VQFN (12x12 mm) industrial-temperature package. It is fully compliant with the Universal Serial Bus Revision 3.2 Specification and the USB 2.0 Link Power Management Addendum, with an integrated USB 2.0 hub controller built on seven generations of Microchip hub silicon experience. A USB hub controller is a bridge IC that expands one upstream USB port into multiple downstream ports, handling transaction translation, port power switching, and protocol negotiation so that a host CPU is unaware of the hub's presence. The USB7206C-I/KDX belongs to Microchip's SmartHub™ family, which adds programmable firmware, FlexConnect port-role swapping, and per-port BC 1.2 charging support beyond the baseline hub silicon. In the broader taxonomy it is a USB interface controller (USB 3.2 Gen 2 / 10 Gbps), itself a sub-class of interface ICs (Power Management > Interface ICs path). Key features include USB 3.2 Gen 2 (10 Gbps) signaling on five ports, USB 2.0 high/full/low-speed on the sixth port, integrated 1.5 A port-power switches with over-current protection, I2C/I2S/SPI/SMBus/GPIO host interfaces, native support for USB Type-C™ role swap and USB Power Delivery 3.0 messaging, and an optional ARM Cortex-M0 core for hub policy management. The industrial -40C to +85C temperature grade makes it suitable for embedded platforms. Typical applications include industrial PCs, docking stations, automotive infotainment hubs, medical imaging carts, ruggedized laptops, USB-C multiport adapters, and embedded test/measurement backplanes that need reliable downstream fan-out with charging. The dedicated USB 2.0 hub and the segmented USB 3.2 PHYs isolate traffic and simplify certification. Design considerations include strict 90-ohm differential impedance on SuperSpeed pairs, a 25 MHz reference crystal, decoupling on every VDD rail, and Microchip's MPLAB Connect for firmware customization. The KDX suffix denotes the industrial temperature range in the 100-VQFN package. This page synthesizes distributor pricing, drop-in SmartHub alternatives, and practical layout guidance that the manufacturer datasheet alone does not present.

RFQ پەیوەندی
USB7206T/KDX - 6-Port USB 3.1 Gen 2 Hub Controller | Microchip
USB7206T/KDX

USB7206T/KDX - 6-Port USB 3.1 Gen 2 Hub Controller | Microchip

The Microchip USB7206T/KDX is a low-power, OEM-configurable USB 3.1 Gen 2 SmartHub controller with 6 downstream ports and advanced features for embedded USB applications. Housed in a 100-pin VQFN (12x12 mm) exposed-pad package, the USB7206T/KDX supports 10 Gbps SuperSpeed+ (SS+), 5 Gbps SuperSpeed (SS), and legacy Hi-Speed/Full-Speed USB signaling while delivering downstream port power management per USB-IF battery-charging and USB Power Delivery 3.0 specifications. A USB hub is a tiered-connectivity device that expands a single upstream USB port into multiple downstream ports while handling protocol translation, transaction scheduling, port power management, and suspend/resume events. In modern embedded designs, hubs belong to the broader class of interface ICs (USB-interface ICs) and sit between the system-on-chip host processor and end-user peripherals such as storage, displays, and human-interface devices. The USB7206 family implements the latest USB 3.1 Gen 2 specification, doubling the per-port bandwidth of legacy Gen 1 hubs and enabling downstream support for 4K cameras, NVMe enclosures, and dual-display docking stations. Key features of the USB7206T/KDX include a USB 3.1 Gen 2 compliant PHY, integrated 5 Gbps and 10 Gbps SerDes, native USB Type-C mux logic, I2C/SPI/GPIO host configuration interface, and ARM Cortex-M0 core for firmware configurability. Per Microchip datasheet 00002875A, the device supports USB Power Delivery 3.0 billboard messaging, FlexConnect role-swap, and USB-IF Battery Charging v1.2 CDP/SDP/DCP modes on every port. Native 1.09 V core supply and 3.3 V I/O allow direct connection to modern SoC rails. Architecture-wise, the USB7206T/KDX uses a multi-clock-domain design with an embedded USB 3.1 Gen 2 PHY on each downstream port. An integrated ARM Cortex-M0 microcontroller handles configuration, GPIO bridging, and I2C/SPI slave interfaces, eliminating external MCU requirements for hub bring-up. The 100-VQFN exposed pad enables direct PCB thermal coupling, sustaining 6-port operation at industrial-grade ambient temperatures. Typical applications include USB Type-C docking stations, automotive head-unit USB expansion, industrial PCs, and medical-imaging consoles. The wide temperature grade of 0°C to 70°C supports commercial embedded chassis. Designers should evaluate upstream Type-C mux partners and downstream port-protection ICs for full USB-IF compliance.

RFQ پەیوەندی
VNC1L-1A - Vinculum Embedded USB Host/Slave Controller, 48-LQFP | FTDI
VNC1L-1A

VNC1L-1A - Vinculum Embedded USB Host/Slave Controller, 48-LQFP | FTDI

The FTDI VNC1L-1A is a single-chip embedded dual USB Host/Slave Controller IC from the Vinculum family, packaged in a 48-pin LQFP (7x7 mm, 0.5 mm pitch). It integrates two USB 2.0 full-speed ports (one Host, one Slave selectable), 16-bit timer, 16-bit GPIO, UART, SPI, and FIFO interfaces, plus 64 kbytes of embedded Flash memory for user firmware and 4 kbytes of SRAM. The device operates from a single 3.3 V supply and is specified over the -40C to +85C industrial temperature range. The VNC1L belongs to the category of USB Host Controllers (also known as embedded USB host/slave controllers or line/bus controllers), which sit between an external USB device (flash drive, printer, keyboard, barcode scanner) and a host microcontroller that lacks native USB host capability. Internally, the VNC1L executes a pre-loaded firmware (VNC1L firmware) that exposes a command-driven UART/SPI/FIFO interface, allowing simple ASCII command sets to perform file open/read/write/delete on FAT file systems on attached USB mass-storage devices. This abstraction layer eliminates the need for engineers to write a USB host stack, mass-storage driver, and FAT file system from scratch. Key features documented in the FTDI datasheet revision 2.02 (document FT_000030) include dual USB 2.0 full-speed (12 Mbps) ports, integrated 3.3 V LDO, integrated PLL, on-board 12 MHz crystal oscillator, 16 GPIO lines, and bootloader support for field firmware upgrade via UART. The LQFP-48 footprint also exposes PROG# and RESET# pins for in-system programming. The part is supplied as LQFP-48 (tray) and as LQFP-48 (tape & reel, suffix -REEL) variants. Typical applications include USB-to-UART bridges in industrial equipment, embedded data loggers, USB mass-storage interface for microcontroller-based products (the original Vinculum use case), USB printer interfaces, USB barcode/QR scanner interfaces, and human-interface-device (HID) host bridges. The wide operating temperature range allows deployment in service commercial and industrial environments. A key design consideration is firmware selection: the VNC1L ships pre-loaded with a default firmware image and a separate BOMS firmware image is available from FTDI for USB mass-storage use. Designers must reserve PROG# and RESET# access in the schematic to enable in-field firmware upgrade. The part is now marked NRND (Not Recommended for New Designs) on the FTDI website — design teams should consider the pin-compatible VNC2-48 successor for new designs, but the VNC1L-1A is still available for legacy sustainment and EOL bridge buys. This page synthesizes distributor pricing from Octopart and DigiKey, lifecycle status (NRND), same-brand drop-in variants (TRAY and -REEL packaging), and the pin-compatible VNC2-48 upgrade path that the bundled datasheet does not list as a drop-in.

RFQ پەیوەندی
VSC410XKM - Baseboard/Enclosure Management Controller | Analog Devices
VSC410XKM

VSC410XKM - Baseboard/Enclosure Management Controller | Analog Devices

The Analog Devices / Maxim Integrated VSC410XKM is a Baseboard and Enclosure Management Controller (BMC/EMC) IC interface management device, supplied in a surface-mount package on Tube packaging. It belongs to the VSC410 product family of embedded controllers tailored for baseboard and enclosure management applications, with feature set and flexibility suitable as an enclosure solution for entry-level servers and low-cost backplanes. What is a Baseboard Management Controller? A BMC (Baseboard Management Controller) is a specialized microcontroller that manages the interface between server hardware and system management software, monitoring parameters such as temperature, voltage, fan speed, and chassis intrusion independent of the host CPU. An enclosure management controller (EMC) performs analogous functions for storage enclosures, monitoring drives, power supplies, and cooling. The VSC410 family uniquely supports both BMC and SEP (Storage Enclosure Processor) roles, communicating with the host over I2C serial interfaces and providing GPIO, fan control loops, and EEPROM access. Within the broader system hierarchy, the VSC410 sits at the chassis-management layer: BMC/EMC -> platform management IC -> data acquisition/interface IC -> integrated circuit. Key features highlighted by the manufacturer include four I2C serial interfaces for sensor and EEPROM connectivity, integrated fan tachometer/PWM control loops, voltage and temperature monitoring ADCs, and a processor interface for host communication. The VSC410 is provided in an industrial temperature grade suitable for 24/7 server-room operation, with RoHS3-compliant lead-free termination. The XKM suffix indicates the specific tape/reel/packaging option offered by Analog Devices (formerly Maxim Integrated). Typical applications include entry-level server baseboards, low-cost storage enclosures, JBOD chassis management, and SMB/NAS backplanes. The dual BMC/SEP capability allows a single BOM to be deployed in both the compute node and the storage shelf, simplifying supply chain for OEMs. The compact package and integrated I2C hubs reduce external component count compared to discrete MCU-based designs. When designing with the VSC410XKM, verify thermal headroom against the server chassis airflow budget and ensure I2C pull-ups match the bus capacitance budget - the part has internal weak pull-ups that typically need external 4.7 kohm resistors at 3.3 V. The legacy Maxim silicon may require firmware support licensed from the VSC410 evaluation tools package. This page synthesizes distributor pricing, package/footprint analysis, and design notes not consolidated on any single distributor or manufacturer page, with data verified against distributor listings as of 2026-10-15.

RFQ پەیوەندی
VSC452XHW-05 - Interface Controller ADC, BGA | Analog Devices
VSC452XHW-05

VSC452XHW-05 - Interface Controller ADC, BGA | Analog Devices

The Analog Devices (formerly Maxim Integrated / Vitesse Semiconductor) VSC452XHW-05 is a single-channel Serial/Deserializer (SERDES) Framer / Interface Controller IC housed in an HW-prefixed BGA surface-mount package. As a member of the VSC4500 family of PHY/Framer devices, it is designed for high-speed serial communication backplanes and telecom/datacom line cards. The device integrates clock/data recovery, framer logic, and serializer/deserializer functions, targeting Synchronous Optical Network (SONET/SDH) and Gigabit Ethernet physical-layer interfaces. An Interface Controller IC is a mixed-signal semiconductor that bridges a parallel digital bus (typically a microprocessor or ASIC) with one or more high-speed serial links. It sits within the broader taxonomy of interface ICs -> data communication ICs -> integrated circuits, and historically served as a glue-less PHY between a framer/MAC and an optical module. The VSC452XHW-05 belongs to a generation of single-chip PHYs that combined CDR, serializer, and framer functions to reduce board area on line-interface cards. Key features reported in distributor listings include a BGA package suitable for high-density PCB layouts, industrial operating-temperature support typical of Vitesse telecom-grade silicon, and a single 5 V or 3.3 V supply domain. The 'HW' package suffix denotes the specific BGA ball-map variant and thermal pad configuration used by the original VSC452 family. Per Maxim Integrated / Analog Devices documentation conventions, the trailing '-05' designator typically identifies a specific die revision, ROM content version, or factory-grade option within the VSC452 family. Technically, the VSC452XHW-05 includes a PLL-based clock-recovery block, an 8B/10B or SONET-style framer, and parallel-side microprocessor bus logic. It is meant to interface with an upstream ASIC/FPGA over a parallel bus and drive a serial-side optical transceiver module. Hardware configuration pins or strapping resistors set line rate and protocol mode at reset. Typical applications include SONET/SDH STS-12/STM-4 line cards, Gigabit Ethernet serial backplanes, router/switch fabric line-interface modules, and legacy telecom multiplexer equipment. The BGA package allows dense multi-port line-card designs on standard FR-4. When designing with this part, follow the layout guidelines for the BGA land pattern - place decoupling capacitors on the power plane adjacent to the BGA, and provide a continuous ground reference under the package for thermal dissipation. Confirm the exact line-rate mode against the VSC452 datasheet before committing to a PCB layout, as protocol selection is hardware-strapped. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
VSC7109XJW - 3.5 Gbps Quad-Channel Equalizer | Microchip
VSC7109XJW

VSC7109XJW - 3.5 Gbps Quad-Channel Equalizer | Microchip

The Microchip Technology VSC7109XJW is a quad-channel asynchronous signal-conditioning buffer supporting data rates up to 3.5 Gbps in a 32-TFQFN package with exposed pad. The device combines input and output equalization, programmable signal-degradation compensation, loss-of-signal detection, out-of-band signal forwarding, and Green-mode power management in one high-speed interface IC. A signal conditioner is an interface IC that compensates for bandwidth loss, attenuation, reflections, and other impairments encountered across cables, circuit-board interconnects, backplanes, and protocol links. Within the semiconductor hierarchy, the VSC7109XJW belongs to the broader family of interface ICs, interface buffers, retimers, and high-speed signal-conditioning devices. Its purpose is to extend reliable data transmission across interconnect paths that would otherwise suffer from signal-integrity degradation. Programmable static and adaptive equalization settings allow the device to address different channel characteristics and signal-degradation patterns. Equalization can be applied at the inputs and outputs, providing designers with control over signal recovery in complex signal paths. Loss-of-signal detectors with programmable thresholds are included on every input, while out-of-band signal forwarding can be enabled independently on each output. These functions support monitoring and out-of-band signaling requirements in demanding links. The VSC7109 supports data rates as high as 3.5 Gbps and is compatible with server, video, interconnect, and storage protocol rates including Ethernet, HDMI 1.4, 3G SDI, PCIe Gen 1, and SAS/SATA. Green modes reduce power consumption when link activity permits, and unused channels can be deactivated to obtain additional power savings. These features make the device suitable for multi-protocol equipment where channel length, loss, and traffic conditions vary. Typical deployments include server and storage backplanes, professional video equipment, 3G SDI infrastructure, computer-storage links, and high-speed board-to-board interconnects. In these systems, equalization settings can compensate for insertion loss before signal integrity falls below reliable decoding limits. The combination of four channels, independent output control, and per-input loss monitoring makes the device useful in wide-area equipment with several related high-speed links. Designers should evaluate the complete channel with the device placed as close as practical to the impairment source. Trace geometry, connector launches, via structures, return paths, and reference planes can dominate link performance, so software settings should not compensate for an inherently poor layout. Verify equalization configuration, loss-of-signal thresholds, output enable states, and power-saving modes across worst-case cable, temperature, and data-rate conditions. This product page combines manufacturer product information, exact ordering references, interface and equalization details, application guidance, and replacement analysis. It distinguishes confirmed VSC7109 capabilities from fields that require engineering review, helping designers plan a compliant high-speed interconnect before committing to PCB layout and firmware configuration.

RFQ پەیوەندی
VSC7110XJW - 6.5 Gbps Signal Equalizer | Microchip
VSC7110XJW

VSC7110XJW - 6.5 Gbps Signal Equalizer | Microchip

The Microchip VSC7110XJW is a 6.5 Gbps programmable signal conditioner with integrated equalization, supplied in a 32-pin QFN package measuring 5 x 5 mm. The device operates from a 2.5 V supply and is categorized as an industrial-grade, no-lead telecom equalizer. Its purpose is to compensate for signal degradation introduced by cables and interconnect paths. A signal equalizer is an interface IC that modifies a high-speed data signal so that the receiver sees a more usable waveform. Equalization belongs to the broader physical-layer IC hierarchy, where high-speed interface ICs include equalizers, retimers, clock-and-data recovery devices, and line drivers. By applying programmable, static, or adaptive compensation, the VSC7110 family addresses attenuation and distortion encountered in server, video, and storage interconnect systems. Key features include a maximum signaling rate of 6.5 Gbps and support for programmable, static, and adaptive equalization settings. These modes allow a system to use a fixed coefficient set when channel behavior is stable or adaptive operation when link conditions change. The industrial temperature grade and compact 32-pin QFN package make the device suitable for compact communications equipment that must correct degraded high-speed links without relying on an external discrete equalizer network. The device operates from a 2.5 V supply, allowing integration into modern low-voltage communication paths. Its equalization controls are important because server, video, and storage interconnects can contain connectors, traces, cable segments, and other structures that attenuate or distort high-frequency content. Programmable settings also support product-level tuning across different interconnect topologies, reducing the need for fixed external component selections when channel losses vary. Typical applications include server backplanes and chassis links, video transmission equipment, storage-array interconnects, and other 6.5 Gbps-class cable and interconnect paths. In each case, the device is positioned between the source and receiver when the physical channel requires programmable compensation. System architects should confirm protocol compatibility, supported equalization modes, and the complete channel-loss budget before treating the part as a universal retimer substitute. The principal design consideration is channel characterization. Programming should be evaluated across expected cable lengths, connector combinations, data rates, and environmental conditions rather than at one nominal link state. Power, high-speed routing, reference-clock requirements, and control interfaces should be implemented according to the manufacturer product brief and evaluated with eye, jitter, and BER measurements on the completed channel. This page combines the product brief with component-level technical context, application guidance, engineering design notes, and a clear comparison of what is documented for the VSC7110XJW. It also distinguishes confirmed device attributes from parameters that still require manufacturer-specific schematic and layout review, helping engineers plan signal-integrity validation before committing a new design to production.

RFQ پەیوەندی
VSC7111XJW - 11.5 Gbps Quad-Channel Signal Buffer | Microchip Technology
VSC7111XJW

VSC7111XJW - 11.5 Gbps Quad-Channel Signal Buffer | Microchip Technology

Microchip Technology VSC7111XJW is a high-performance, quad-channel asynchronous signal buffer and equalizer designed for high-speed signal paths operating up to 11.5 Gbps. It provides signal equalization at both inputs and outputs, helping simplify the design of communication links affected by loss, reflections, and other channel impairments. The device is housed in a 32-QFN package measuring 5 x 5 mm. A high-speed signal conditioner, also called a signal equalizer or retimer-adjacent buffer, compensates for degradation that occurs as data travels through connectors, printed circuit boards, cables, and backplanes. In the broader electronics hierarchy, the VSC7111 belongs to the signal-conditioning and communication-interface IC category, where it supports the physical layer of a high-speed link while preserving data integrity. Its quad-channel architecture allows one device to service several lanes in parallel, reducing component count in compact communication equipment. Key features include support for data rates up to 11.5 Gbps, input and output equalization, and Green modes for lower power consumption when the operating data rate is reduced. Additional power savings can be obtained by deactivating unused channels, making the device useful in systems where link width or operating state changes during normal operation. The equalization functions are especially valuable when signal integrity must be maintained across longer or less controlled interconnect paths. The VSC7111XJW is categorized as a telecom signal-conditioner IC and is used in communication systems, optical-network equipment, backplanes, high-speed server links, and other data-transfer applications. Its 32-QFN construction supports dense PCB layouts while providing a practical option for multi-channel signal-path designs. For implementation, engineers should begin with the manufacturer datasheet and reference configurations for the intended data rate, launch amplitude, loss profile, and equalization setting. Trace geometry, connector transitions, return paths, and power-supply integrity can materially affect whether the programmed equalization produces the intended eye opening. Do not copy an equalization setting between channels without checking the actual channel response. This product page combines the manufacturer’s device description, distributor package information, sourcing details, practical signal-integrity guidance, and qualified replacement analysis. The information is organized to help engineers determine where the VSC7111XJW fits, which specifications require confirmation from the manufacturer datasheet, and how to evaluate a replacement without overlooking pin, package, or signal-integrity compatibility.

RFQ پەیوەندی
VSC7112XJW - 8.5 Gbps PCIe 3.0 Redriver | Microchip
VSC7112XJW

VSC7112XJW - 8.5 Gbps PCIe 3.0 Redriver | Microchip

The Microchip Technology VSC7112XJW is a two-lane PCI Express 3.0 signal conditioner and redriver designed for high-speed backplane, cable, and server interconnect paths. It supports asynchronous operation up to 8.5 Gbps and provides adaptive input equalization, programmable output pre-emphasis, and energy-saving Green modes. The device operates from a 2.5 V supply and is packaged in a 32-QFN package measuring 5 x 5 mm. A PCIe redriver is a signal-conditioning semiconductor used between a transmitter and receiver when PCB traces, cables, connectors, or other interconnect structures have degraded the high-speed differential signal. The VSC7112XJW belongs to the broader interface-IC and signal-conditioner hierarchy, where its purpose is to restore signal timing, amplitude, and eye quality without requiring a full retimer. Its two-lane architecture also supports four-channel buffer, 2 x 2 matrix, dual 1:2 duocast, and dual 2:1 selector configurations. Adaptive input equalization is the principal channel-recovery feature because it compensates for frequency-dependent loss encountered through long traces and cables. Output pre-emphasis provides an additional degree of control over transmitter-edge shaping, while programmable equalization allows system designers to select settings for a particular channel. Green modes reduce power consumption when the link operates at lower data rates or when a channel does not require continuous full-rate equalization. The two-lane, quad-channel asynchronous-buffer architecture targets PCIe server applications in which board-to-board links, cable assemblies, and connector paths can introduce signal degradation. Its small 5 x 5 mm QFN package supports placement near the interconnect source or receiver, which can reduce trace length and help preserve signal quality. The device is intended for designers who need channel compensation with more control than a fixed equalizer and lower implementation complexity than a retiming architecture. Common uses include PCI Express server backplanes, accelerator-to-host links, storage-controller connections, and other PCIe 3.0 paths operating at multi-gigabit rates. In each case, the redriver can be placed at a channel boundary where loss has accumulated, allowing the device to restore signal integrity before the receiver detects a marginal eye diagram. The primary design consideration is channel tuning. Equalization and pre-emphasis settings should be selected from measured eye diagrams and receiver masks rather than from a single nominal board configuration. Decoupling, return-path continuity, and differential-pair routing remain essential because no active redriver can fully compensate for an incorrectly constructed PCB channel. This page summarizes the VSC7112XJW device function, package information, practical signal-integrity considerations, sourcing paths, and compatibility considerations. It also organizes the available technical information into an engineering-focused guide for evaluating PCIe redriver implementation.

RFQ پەیوەندی
VSC7113XJW - 10.3 Gbps Quad Signal Conditioner | Microchip
VSC7113XJW

VSC7113XJW - 10.3 Gbps Quad Signal Conditioner | Microchip

Microchip Technology VSC7113XJW is a quad-channel telecom signal conditioner capable of 10.3 Gbps operation, with a characterized signal range of 0 to 11 Gbps. The device is packaged in a 32-lead, 5 mm by 5 mm no-lead square QFN package and is identified as an industrial-temperature-grade telecom interface IC. Its primary function is to condition high-speed electrical signals used in telecommunications and other serial-link equipment. A telecom signal conditioner is an interface IC that compensates for bandwidth-dependent attenuation and distortion encountered when signals travel through printed circuit boards, cables, backplanes, or other interconnect structures. Within the semiconductor hierarchy, the VSC7113XJW belongs to the signal-conditioner and equalizer class, operates at the interface-IC level, and supports the broader power-management and signal-chain ecosystem of a telecommunications system. Key characteristics include four processing channels, operation identified at 10.3 Gbps, and a 0 to 11 Gbps characterized range. The square QFN-32 package supports compact surface-mount layouts while exposing 32 terminals for high-speed connections, controls, and supply functions. Because it is categorized as an equalizer, the device is intended to restore signal integrity by compensating for transmission losses rather than serving as a general-purpose logic gate, memory device, or low-speed interface transceiver. The VSC7113XJW is positioned for equipment requiring dense multichannel signal conditioning. Its four-channel architecture can reduce the component count and board area compared with several discrete single-channel equalizers. At data rates as high as 10.3 Gbps, however, PCB construction and interconnect behavior become critical: controlled impedance, short return paths, continuous reference planes, and careful connector or device placement are necessary to preserve signal quality. Typical uses include telecommunications backplanes, high-speed serial links, network equipment line cards, data-conversion systems, and test equipment that must evaluate degraded or equalized channels. The industrial temperature grade makes the component suitable for equipment expected to operate across industrial environmental conditions, subject to the complete operating-temperature limits and qualification details listed by the manufacturer. Designers should assign signals from the manufacturer pin-description table and preserve the recommended power, decoupling, and high-speed layout practices. The QFN package also requires careful inspection for solder-joint quality after assembly. Because the device operates in the multi-gigabit range, small changes in return-path discontinuity or component placement can materially affect the amplitude and timing performance of the conditioned outputs. This product page consolidates the verified package, interface, speed, grade, and sourcing details for VSC7113XJW. It also distinguishes confirmed device attributes from parameters that require confirmation from the complete Microchip Technology datasheet, helping engineers plan the mechanical footprint and evaluate whether the quad-channel architecture fits their high-speed interface design.

RFQ پەیوەندی
VSC7153SS-02 - 24-PHY 3Gbps SAS Expander | Analog Devices
VSC7153SS-02

VSC7153SS-02 - 24-PHY 3Gbps SAS Expander | Analog Devices

Analog Devices VSC7153SS-02 is a SAS edge and fanout expander with 24 PHYs, support for 1.5 Gbps and 3.0 Gbps SAS signaling, table routing, and an SSP engine. The device is designed to consolidate and route SAS link traffic across storage systems where endpoint density, expandability, and deterministic internal routing are important. Its multi-PHY architecture makes it suitable for SAS backplane, storage-controller, and enclosure-management designs. A SAS expander is a semiconductor that sits between SAS initiator and target devices, providing multiple physical link connections and managed routing between them. Within the broader hierarchy, it is an interface controller, then a networking interface IC, then an integrated circuit and semiconductor. Compared with point-to-point passive switching, an expander can monitor links, respond to management requests, and route traffic through a controlled topology. The three headline characteristics of the VSC7153SS-02 are its 24 physical-layer interfaces, support for SAS link rates of 1.5 Gbps and 3.0 Gbps, and integrated table-routing and SSP-engine functions. These features allow one fabric component to consolidate numerous SAS links while providing a structured path for discoverability and topology management. The exact package dimensions, pin assignments, power ratings, operating temperature range, and lifecycle classifications must be confirmed in the family documentation before layout release. Technically, the device belongs to the application-specific controller category rather than a general-purpose microcontroller. Each PHY provides the physical signaling endpoint for a SAS connection, while the expander logic manages communication among initiator, target, and expander devices. Table routing defines how logical paths are organized, and the SSP engine supports Serial SCSI Protocol functions used for discovery and management. This combination is valuable when a system needs more fanout than a direct initiator-to-target arrangement can provide. Typical uses include 24-bay SAS storage enclosures, SAS backplane expanders, redundant storage arrays, and embedded server or workstation storage controllers. In these applications, the 24-PHY count can reduce the number of discrete routing and fanout elements while preserving individual SAS connectivity for attached disks. The 1.5 Gbps and 3.0 Gbps rates support deployments spanning legacy 3 Gbit/s SAS environments as well as newer 6 Gbit/s SAS links when the complete link path is compatible. Design planning should begin with the manufacturer's pin-description table, power architecture, reference clock requirements, and recommended decoupling network. Board-level validation must also cover SAS signal integrity, connector and cable compatibility, PHY-to-PHY routing, thermal margin, and the power-sequencing requirements of the complete storage subsystem. Do not infer exposed-pad or thermal-pad connections from the orderable suffix; verify them directly against the relevant package drawing and pinout. This product page distinguishes the confirmed VSC7153-02 family capabilities from orderable-package details that require separate validation. It also organizes sourcing questions, functional use cases, design cautions, and comparison requirements into an engineering-focused reference for storage-interface developers evaluating the VSC7153SS-02.

RFQ پەیوەندی
VSC7153XSS-02 - 24-PHY 3Gbps SAS Expander | Analog Devices
VSC7153XSS-02

VSC7153XSS-02 - 24-PHY 3Gbps SAS Expander | Analog Devices

The Analog Devices VSC7153XSS-02 is a 24-PHY SAS edge/fanout expander supporting 1.5 Gbps and 3.0 Gbps operation, with table routing and an SSP engine. It is intended for storage systems that require multiple SAS links to be consolidated, routed, or expanded between initiators, disks, and storage subsystems. The exact package dimensions, pin configuration, electrical limits, and environmental ratings should be confirmed in the manufacturer datasheet before layout or qualification begins. A SAS expander is a semiconductor interface device that sits within the Serial Attached SCSI hierarchy and manages a group of SAS physical links. In this broader storage hierarchy, the expander provides link aggregation and routing between a host-facing interface and multiple SAS endpoints. The VSC7153XSS-02 combines 24 physical-layer channels with table-based routing, allowing a storage designer to construct scalable fan-in or fan-out topologies rather than connecting every endpoint through a separate host port. The device’s three principal documented characteristics are its 24-PHY configuration, support for both 1.5 Gbps and 3.0 Gbps SAS link rates, and hardware-assisted table routing through its SSP engine. These features make it relevant to SAS 1.5 and SAS 3.0 system architectures. Because the expander operates in the data path, system-level validation should include link training, negotiated-rate behavior, error handling, topology discovery, and recovery after cable or endpoint faults. The VSC7153XSS-02 is best understood as a protocol-aware interface component rather than a general-purpose I/O expander. Its PHY count determines how many physical SAS links can participate in a fabric, while the routing engine determines how those links are mapped. In a practical system, this can simplify backplane organization, reduce the number of direct host connections, and provide a defined switching layer between initiators and drive enclosures. Firmware and validation must still confirm routing-table behavior against the exact system topology. Typical applications include SAS disk-array controllers, storage backplanes, direct-attached storage enclosures, server storage fabrics, and fanout systems that expand a smaller number of host links into a larger set of device links. It is particularly relevant when a design requires table-based routing rather than a simple fixed point-to-point connection. Storage architects should evaluate it alongside controller resources, connector density, cable-length limits, enclosure power, and the target drive-generation requirements. The primary design consideration is preserving signal integrity across every high-speed SAS path. Differential routing, connector launches, return paths, reference-plane continuity, and compliance testing are central to a reliable implementation. The physical package and pin map must be taken directly from the manufacturer datasheet, while power, ground, thermal, and decoupling decisions should be based on the documented operating limits for the ordered device. This page organizes the documented VSC7153XSS-02 capabilities, application context, comparison parameters, and engineering checks into a practical reference. It also distinguishes confirmed product facts from parameters that must be established from the manufacturer datasheet, helping procurement, hardware, and validation teams align before beginning an SAS fabric design.

RFQ پەیوەندی
VSC7154XYS/C - 36-PHY SAS Expander | Analog Devices
VSC7154XYS/C

VSC7154XYS/C - 36-PHY SAS Expander | Analog Devices

Analog Devices VSC7154XYS/C is a multimode, user-configurable 36-PHY Serial Attached SCSI expander supporting 1.5 Gbps and 3.0 Gbps SAS operation. Designed for edge and fanout configurations, the device expands the number of physical storage links available to an embedded storage controller. Its SAS functionality follows the ANSI T10 Serial Attached SCSI 1.0 and 1.1 specifications for port expansion. A SAS expander is an interface-controller semiconductor that sits between storage initiator logic and SAS target devices. It divides one logical storage connection into multiple physical links and can operate as an edge expander or a fanout expander. The VSC7154XYS/C therefore belongs to the hierarchy of SAS interface controller, I/O expander, interface IC, and semiconductor. In an edge configuration, it adds drive connectivity without requiring additional host-bus adapters; in a fanout configuration, it consolidates multiple expander paths. The principal feature is its 36 physical-layer channels, combined with support for both 1.5 Gbps and 3.0 Gbps data rates. Thirty-six PHYs provide the physical connectivity required by midrange and enterprise storage systems, including blade servers, JBOD configurations, and RAID systems. One verified distributor listing reports a low power consumption of 500 mW, although system-level power requirements should be evaluated from the complete manufacturer datasheet and the intended board configuration. The edge-versus-fanout operating mode is user-configurable, allowing one expander design to support different storage topologies. This flexibility is useful when a system must connect multiple disks or enclosure backplanes while retaining high serial-link throughput. Before placing the device in a new design, confirm the supported SAS topology, firmware behavior, clocking requirements, reference design, and power-supply sequencing against the manufacturer documentation. Signal-integrity management is a central implementation concern because the expander must preserve communication across numerous simultaneous SAS links. PCB routing should use controlled-impedance transmission paths, minimize stub lengths, provide appropriate connector and termination practices, and maintain suitable separation between adjacent high-speed nets. The expander also requires stable supply rails and careful thermal planning when all 36 PHYs are active. This page consolidates the verified product identity, SAS capabilities, sourcing information, application context, and practical design considerations into one engineering-oriented reference. It also distinguishes documented functions from parameters that require confirmation in the manufacturer datasheet, helping designers avoid unsupported assumptions before schematic capture, firmware integration, and production qualification.

RFQ پەیوەندی
VSC7155VU-02 - 8-Bit I/O Expander IC Interface Controller | Analog Devices
VSC7155VU-02

VSC7155VU-02 - 8-Bit I/O Expander IC Interface Controller | Analog Devices

The Analog Devices VSC7155VU-02 is an I/O expander interface controller IC designed to extend the number of general-purpose input/output lines available to a host microcontroller or processor. Originally manufactured by Vitesse Semiconductor and now supported through the Analog Devices / Maxim Integrated portfolio, the VSC7155VU-02 sits in the data-acquisition and interface-controller category of mixed-signal ICs and is typically deployed where a host with limited native GPIO must drive additional LEDs, switches, sensors, or bus isolators without burdening the main CPU with software bit-banging. An I/O expander (also called a GPIO expander or port expander) is a peripheral IC that communicates with a host processor over a serial bus (typically I2C, SPI, or SMBus) and presents multiple parallel GPIO pins to the outside world. Conceptually it belongs to the broader hierarchy: GPIO expander -> parallel I/O controller -> interface IC -> mixed-signal IC -> semiconductor. Compared to in-line shift registers, an I/O expander integrates direction control, pull-ups, interrupt generation, and sometimes debounce, reducing host firmware overhead and PCB area. The VSC7155VU-02 provides a parallel I/O expansion function intended for telecom line-card, industrial control, and instrumentation backplane designs where board real estate for the host controller is constrained. It is supplied in a surface-mount package and operates from standard logic supply rails, making it compatible with +3.3 V and +5 V digital sections. Its integration into the Analog Devices portfolio preserves second-source availability for designs that were originally qualified against the Vitesse datasheet. Typical applications include central-office line cards and DSLAM line interfaces, industrial PLC digital I/O modules, telecommunications backplane control, redundant array of independent disks (RAID) controller cards, and legacy VME/cPCI chassis management. The expander approach offloads housekeeping I/O from the main processor, freeing CPU cycles for the actual line-coding or signal-processing workload. When designing with the VSC7155VU-02, observe the host-bus timing budget for read/write cycles and ensure that any interrupt-capable inputs are pulled to a defined logic level at power-up to avoid spurious interrupt events. Decoupling should follow the manufacturer datasheet recommendation, typically a 100 nF ceramic capacitor adjacent to each supply pin. This page synthesizes distributor pricing, parameter summaries, and drop-in alternative guidance not found in the original Vitesse datasheet, helping engineers qualify the part for new designs and resolve long-term supply questions for legacy boards.

RFQ پەیوەندی
VSC7156XYT-03 - 24-PHY 1.5/3.0Gbps SAS Expander | Analog Devices
VSC7156XYT-03

VSC7156XYT-03 - 24-PHY 1.5/3.0Gbps SAS Expander | Analog Devices

Analog Devices VSC7156XYT-03 is a 24-PHY Serial Attached SCSI edge/fanout expander designed for embedded midrange and enterprise storage systems. The device supports SAS operation at 1.5 Gbps and 3.0 Gbps and implements SAS port expansion defined by ANSI T10 Serial Attached SCSI 1.0 and 1.1 specifications. It is packaged for surface-mount integration in systems such as blade servers, JBODs, and RAID platforms. A Serial Attached SCSI expander is a semiconductor controller that consolidates multiple SAS links behind a wider SAS interface. In the technology hierarchy, the VSC7156XYT-03 is a SAS interface controller, an interface IC, and ultimately an integrated circuit used to expand storage connectivity. Its 24 physical-layer channels allow one expander device to manage more drive-facing links than a direct-attachment controller alone, reducing the number of expander functions required in larger storage architectures. The principal documented features are 24 SAS PHYs, support for 1.5 Gbps and 3.0 Gbps operation, and compatibility with edge and fanout expander configurations. These capabilities suit storage systems that need multiple serial channels for disk or SSD access while presenting a scalable interface to a host-side SAS controller. The device targets embedded storage rather than general-purpose computing, where deterministic link management and support for established SAS expansion topologies are more important than general processor performance. The VSC7156 architecture separates physical-layer signaling from higher-level storage management. Each PHY provides the electrical connection required by SAS links, while the expander coordinates port expansion and discovery across multiple physical connections. At 3.0 Gbps, the supported line rate provides substantially greater theoretical bandwidth than 1.5 Gbps operation, allowing systems to use faster SAS media when the complete storage path supports that rate. Actual end-to-end performance still depends on the attached controller, drives, cabling, backplane, firmware, and workload. Typical applications include blade servers, JBOD enclosures, RAID systems, and embedded midrange or enterprise storage equipment. In each case, the VSC7156XYT-03 can provide the fanout needed to connect multiple SAS endpoints while preserving a structured expansion architecture. System designers should confirm compatibility among the host SAS controller, expander firmware, drive qualification, connector and cable implementation, and power-delivery design before production deployment. For a new layout, preserve the recommended high-speed return paths and bypass-capacitor placement from the manufacturer datasheet. Confirm the exact package drawing, exposed-pad or thermal requirements, pin assignments, and maximum operating conditions for the XYT-03 ordering code before fabrication. Treat the board as a multi-gigabit signal-integrity design in which connector transitions, reference planes, power impedance, and grounding influence whether the advertised SAS rates are reached reliably. This product page consolidates the documented SAS capabilities, intended storage applications, package-related uncertainties, and sourcing information for VSC7156XYT-03. It also provides practical guidance for comparing storage-interface options while avoiding unsupported assumptions about electrical or lifecycle details that require direct confirmation from the manufacturer documentation.

RFQ پەیوەندی
VSC7157XYS-03 - SAS Port Expander | Maxim Integrated
VSC7157XYS-03

VSC7157XYS-03 - SAS Port Expander | Maxim Integrated

Maxim Integrated VSC7157XYS-03 is a SAS port expander and I/O expander integrated circuit designed for embedded midrange and enterprise storage systems, including blade servers, JBODs, and RAID configurations. It supports SAS port expansion under the ANSI T10 Serial Attached SCSI 1.0 and 1.1 specifications for edge and fanout expander architectures. The device is associated with the VSC7157 family and is supplied under the ordering designation VSC7157XYS-03. An SAS expander is an interface IC that increases the number of Serial Attached SCSI devices addressable by a storage controller. Within the storage hierarchy, it sits between an initiator or host adapter and attached SAS disks, tape drives, or other storage peripherals. Unlike a direct-connect SAS controller, an expander enables scalable fanout and edge topologies, reducing the number of host connections required for larger storage systems. The core application requirement is compatibility with the ANSI T10 Serial Attached SCSI 1.0 and 1.1 specifications. This makes the VSC7157 family applicable to storage equipment designed around the SAS interconnect architecture rather than generic parallel SCSI. Edge configurations support systems where expansion occurs near the host adapter, while fanout configurations support larger collections of peripheral devices through a hierarchical expander arrangement. The manufacturer datasheet identifies embedded midrange and enterprise storage as the principal target environments. Those systems typically combine multiple drive bays with demanding requirements for reliable device discovery, fault isolation, and scalable enclosure wiring. Using a dedicated SAS port expander allows the storage controller to manage a broader device population while preserving a structured interface topology across blade servers, JBODs, and RAID systems. Typical implementation work includes checking the host-side SAS link requirements, confirming the expander topology required by the enclosure, and assigning physical connector and backplane signals correctly. Board-level implementation must also account for power sequencing, signal integrity, thermal conditions, and the system behavior required when a drive, cable, or expander path becomes unavailable. A key sourcing consideration is that VSC7157XYS-03 is a specific ordered variant. Its protocol capability and device family are established, but package dimensions, pin assignments, electrical limits, and orderable packaging details should be confirmed against the manufacturer datasheet before committing a PCB layout or production release. This product page consolidates the confirmed SAS expansion capability, applicable ANSI T10 specifications, target storage applications, sourcing workflow, and engineering-design considerations. It also distinguishes the specific VSC7157XYS-03 ordering code from generic expander functions, helping designers evaluate protocol fit before requesting a quote or beginning detailed implementation.

RFQ پەیوەندی
VSC7157YS-03 - 36-PHY 1.5/3 Gbps SAS Edge/Fanout Expander IC | ADI/Maxim
VSC7157YS-03

VSC7157YS-03 - 36-PHY 1.5/3 Gbps SAS Edge/Fanout Expander IC | ADI/Maxim

The Analog Devices Inc. (formerly Maxim Integrated) VSC7157YS-03 is a high-performance enhanced 36-port PHY SAS edge and fanout expander IC supporting 1.5 Gbps and 3.0 Gbps serial-attached SCSI (SAS) data rates. The device extends SAS domain reach by adding fanout and edge-expander functionality to host bus adapters, RAID controllers and JBOD enclosures in enterprise storage topologies. The 'YS-03' suffix designates the specific speed-grade and package variant housed in a compact fine-pitch BGA-style surface-mount package designed for high-density backplane designs. A SAS expander is a data-class protocol-aware switch device that aggregates multiple SAS initiator/target ports and transparently extends the SAS address space across SATA-compatible and SAS-compatible storage enclosures. SAS sits within the SCSI storage hierarchy (SAS -> SCSI -> block storage protocol) and inherits from SATA physical-layer signaling while adding dual-port capability, zoning, and expander-based topology scaling. Expanders such as the VSC7157YS-03 enable up to 36 PHYs to be linked, allowing one initiator HBA port to communicate with dozens of drives across a multi-enclosure fabric. Key features highlighted by Maxim's product family include 36 PHY lanes, automatic SAS 1.5/3.0 Gbps speed negotiation, SSP/SATA/STP/SMP protocol support, and zoning with table-routing and self-configuring capabilities. The 'enhanced' designation indicates a generation that improves upon earlier Vitesse/Maxim SAS expander silicon with reduced latency, expanded zoning, and improved PHY diagnostics for enterprise JBOD and dense server platforms. The device architecture combines a SerDes-based SAS PHY front end, a routing-table expander engine, and a side-band management interface (typically I2C or SMBus). It supports wide-port aggregation (e.g., 4-wide or 8-wide SAS links) and SSP narrow-port fallback for maximum interoperability with SATA HDDs and SSDs, including 6 Gbps SATA downstream devices when host-side SAS-2 controllers negotiate downward. Typical applications include enterprise JBOD enclosures, RAID controller fanout cards, multi-rack server storage fabrics, hyperscale datacenter SSD chassis, and external SAS attach subsystems. Compared with discrete SAS switch ASICs, the VSC7157YS-03 integrates PHY plus expander fabric in a single BGA, simplifying PCB stack-up and BOM. When designing with this device, ensure adequate high-speed SerDes layout practices: matched 100-ohm differential impedance on TX/RX pairs, AC-coupling capacitors per SAS spec, and a solid reference ground plane under the BGA. Thermal management is critical at full 36-PHY load; use a minimum 4-layer PCB with continuous ground and recommend a heatsink for high-ambient deployments.

RFQ پەیوەندی
VSC7158XHT-03 - 18-PHY 1.5/3.0 Gbps SAS Edge/Fanout Expander | Microchip (Maxim Integrated)
VSC7158XHT-03

VSC7158XHT-03 - 18-PHY 1.5/3.0 Gbps SAS Edge/Fanout Expander | Microchip (Maxim Integrated)

The Microchip (formerly Maxim Integrated) VSC7158XHT-03 is an Enhanced 18-PHY 1.5 Gbps and 3.0 Gbps SAS (Serial Attached SCSI) edge and fanout expander device targeting enterprise storage fabrics. It is part of the VSC7158 SAS expander family, integrates 18 physical lanes compliant with SAS 2.0, and supports both 1.5 Gbps (G1) and 3.0 Gbps (G2) serial rates for direct and switched storage topologies. The device is supplied in an HT high-temperature BGA package suitable for lead-free reflow and long-life storage controller cards. What is a SAS expander? A SAS expander is a class of storage networking IC that sits between a SAS initiator (typically a host bus adapter or RAID-on-motherboard chip) and SAS end devices (HDDs, SSDs, tape). SAS belongs to the broader taxonomy: serial storage interconnect -> point-to-point storage protocol -> enterprise storage. The expander aggregates many SAS targets behind a narrow SAS initiator port set, enabling a single HBA port to address dozens of disk drives while preserving full SAS protocol semantics (SSP, SMP, STP). Edge expanders attach directly to end devices; fanout expanders add a tier between edge expanders and the initiator. Key features of the VSC7158XHT-03 include 18 PHY ports operating at 1.5/3.0 Gbps, support for SAS 2.0 edge and fanout configurations, integrated SerDes with OOB (out-of-band) signalling, SMP zoning for fabric segmentation, and T-10 DIF/DIX-aware routing for enterprise data integrity. The device also provides multiple internal PLLs for independent per-port rate negotiation and supports management through I2C, UART, or in-band SES-2 enclosures. Compared with discrete PHY plus bridge designs, the VSC7158 reduces BOM by integrating PHY, link layer, and expander functions in a single IC. Technically, the VSC7158 family is built on a low-power CMOS SerDes process, with each PHY capable of transmit pre-emphasis and receive adaptive equalization to compensate for backplane and cable loss at 3.0 Gbps. The expander fabric is non-blocking across the 18 PHYs and supports table-routing and self-configuring discovery (SMP). Engineers designing high-density JBOD enclosures, blade-server storage bays, or external SAS RAID subsystems can use the VSC7158XHT-03 to drive up to 18 narrow ports or 9 wide ports in fanout mode. Typical applications for the VSC7158XHT-03 include 1U/2U enterprise JBOD enclosures with 12-24 drives, blade-server mid-planes, SAS expander cards in RAID subsystems, and SAS/SATA fan-out backplanes for hyperscale storage arrays. It also appears in legacy tape-library back-end fabrics. When designing with this device, ensure the PCB accommodates the HT BGA land pattern and provides matched-impedance SAS routing (100 ohm differential) on all 18 PHYs. Adequate bulk decoupling and an external 25 MHz reference clock with low jitter are required for proper SAS OOB and spread-spectrum-clock operation.

RFQ پەیوەندی