بەرهەمەکان (5,100+)

BCM5762B0KMLG - PCIe GBE MAC/PHY Controller | Broadcom
BCM5762B0KMLG

BCM5762B0KMLG - PCIe GBE MAC/PHY Controller | Broadcom

The Broadcom BCM5762B0KMLG is a PCI Express Gigabit Ethernet MAC/PHY controller with DASH 1.0 support, supplied as an interface controller IC for telecommunications and networked computing equipment. The combined MAC and physical-layer architecture supports a single-chip Gigabit Ethernet connection while communicating with a host system through the PCI Express interface. An Ethernet MAC/PHY controller is a type of interface IC that bridges a computing system and a physical network. The MAC portion manages frame processing and host-facing data transfer, while the PHY handles the electrical signaling required for Gigabit Ethernet. Combining these functions can reduce board-level component count compared with a design that uses separate Ethernet MAC and PHY devices. PCI Express provides the high-speed peripheral link used to exchange data between the controller and the host processor. The BCM5762B0KMLG is identified as a PCI-E GBE MAC/PHY with DASH 1.0 capability. DASH 1.0 support is significant for systems that need a dedicated hardware-assisted Ethernet path rather than relying only on software-managed networking. Gigabit Ethernet support makes the device applicable to routers, gateways, embedded systems, set-top equipment, and industrial network controllers where a 1 Gb/s network interface is required. Technical implementation requires careful coordination among the PCIe host interface, Gigabit Ethernet PHY, network magnetics, clocks, and power rails. The device integrates the digital MAC and physical-layer functions, but the external network still requires suitable magnetic coupling, an appropriate Ethernet transformer or PHY interface network, controlled impedance routing, and isolated power as required by the system architecture. Firmware and host drivers must also support the selected controller configuration. Typical uses include telecommunications access equipment, routers, network appliances, embedded servers, and industrial Ethernet systems. In these applications, the integrated MAC/PHY arrangement can simplify board partitioning while the PCI Express interface provides a conventional host connection. System suitability still depends on the required driver, operating system, network magnetics, thermal environment, and connector implementation. The main design consideration is verification against the manufacturer datasheet for pin assignments, power sequencing, reference clocks, PHY strap settings, and supported operating modes. Use the datasheet pin-description table when assigning PCB tracks, and preserve the specified high-speed and Ethernet differential-routing geometry to avoid signal-integrity problems. This page combines the Broadcom device classification, procurement guidance, verified lifecycle information, interface-selection considerations, and engineering notes needed to evaluate the BCM5762B0KMLG for a PCIe Gigabit Ethernet design.

RFQ پەیوەندی
BCM5787MKFBG - Integrated Gigabit Ethernet MAC/PHY | Broadcom
BCM5787MKFBG

BCM5787MKFBG - Integrated Gigabit Ethernet MAC/PHY | Broadcom

The Broadcom BCM5787MKFBG is an integrated Gigabit Ethernet controller combining a MobileMAC, Ethernet physical layer, and one-lane PCI Express interface in a single surface-mount IC. This combination consolidates network connectivity and host interface functions onto one board, reducing component count in embedded systems that require wired Gigabit Ethernet. The device is identified as an enhanced BCM5787-series Ethernet controller and is supplied in a Broadcom surface-mount package. An Ethernet controller is an interface integrated circuit that connects a computing system to a physical Ethernet network. Its MAC layer manages frame addressing and data transfer between the host and network, while its PHY handles the electrical signaling required by twisted-pair Ethernet. In the broader semiconductor hierarchy, the BCM5787MKFBG belongs to the Ethernet interface-controller family, combining network-interface functionality with PCI Express connectivity. The primary feature of the BCM5787MKFBG is its integrated Gigabit Ethernet MAC/PHY with a single PCI Express lane. Integrating the physical layer removes the need for a separate Ethernet transceiver in many designs, while the PCI Express interface provides a standardized high-speed connection to a host processor. The enhanced configuration makes the controller suitable for compact embedded platforms that need network connectivity without dedicating multiple external interfaces to Ethernet. BCM5787-series devices are commonly associated with mobile and embedded computing platforms where power, board area, and system throughput must be balanced. The controller’s integrated architecture reduces the number of high-speed interconnects on the PCB, but it also requires careful high-speed layout, solid reference-plane continuity, and correct separation between Ethernet magnetics and sensitive digital or analog circuitry. Typical uses include embedded industrial controllers, mobile-computing platforms, thin clients, set-top equipment, and network appliances that require Gigabit Ethernet over copper. It may also be considered for USB or PCI Express adapter designs when the system architecture already supports PCI Express and the Ethernet physical-layer requirements are compatible. For a new layout, follow the pin-description table, reference-plane guidance, and decoupling recommendations in the Broadcom BCM5787 datasheet. Preserve the manufacturer-defined land pattern, provide the specified input and output capacitors near their associated pins, and route high-speed differential signals without unnecessary stubs or layer transitions. This page organizes the available BCM5787MKFBG product information into a technical selection view with specification gaps clearly identified, application guidance, design considerations, and a focused comparison framework. It also distinguishes confirmed drop-in candidates from related devices that require separate engineering review.

RFQ پەیوەندی
BCM58101B0KFBG - Broadcom Lynx Networking System-on-Chip
BCM58101B0KFBG

BCM58101B0KFBG - Broadcom Lynx Networking System-on-Chip

The Broadcom BCM58101B0KFBG is a LYNX networking system-on-chip (SoC) supplied in a bulk package for embedded networking applications. The device is identified as BCM58101 series silicon, with the B0 ordering designation and KFBG package suffix defining the exact catalog configuration. Broadcom positions this device as an integrated networking SoC rather than a discrete microcontroller or general-purpose processor. A system-on-chip is an integrated circuit that combines multiple functional blocks, such as processing, memory, communications, and peripheral interfaces, into one semiconductor device. Within the electronics hierarchy, an SoC is a type of integrated circuit and semiconductor. Integrating networking functions into a dedicated SoC can reduce component count, simplify hardware design, and centralize control of Ethernet-connected products. The BCM58101B0KFBG is identified as a Broadcom LYNX-series device and is categorized as an embedded system-on-chip. Its B0 and KFBG suffixes are important commercial identifiers that distinguish this exact device from related BCM58101 configurations. A closely related catalog entry is BCM58101LB0KFBG, which appears in the BCM58101 family and is identified by DigiKey as another LYNX SoC configuration. The exact processor core, clock rate, flash capacity, RAM capacity, Ethernet interfaces, transceiver arrangement, I/O voltage, and power requirements are not stated in the available manufacturer or distributor material. Those attributes should be taken from the Broadcom BCM58101 datasheet and product-selection guide before schematic capture or PCB layout begins. In particular, the presence of the word SoC in a distributor listing does not by itself define the number or type of Ethernet ports. BCM58101-family devices are associated with embedded networking equipment and Broadcom LYNX solutions. Typical system contexts include Ethernet access equipment, customer-premises equipment, residential gateways, and other LAN-connected products that require integrated network processing. The exact product-level suitability depends on the interface, software-support, thermal, and regulatory requirements of the finished equipment. Bulk packaging is identified for the BCM58101B0KFBG. Production designers should therefore confirm the package drawing, pin assignments, exposed-pad requirements, soldering profile, and assembly moisture requirements from the manufacturer documentation rather than inferring them from the distributor category. Confirming those details early prevents footprint, thermal-pad, and routing incompatibilities. This page combines exact catalog identity, current commercial availability information, family-level comparison options, sourcing guidance, and structured design checklists for BCM58101B0KFBG. It is intended to accelerate engineering review while keeping package-specific decisions tied to the official Broadcom documentation.

RFQ پەیوەندی
BCM58103B0KFBG - LYNX Security Processor SoC | Broadcom
BCM58103B0KFBG

BCM58103B0KFBG - LYNX Security Processor SoC | Broadcom

The Broadcom BCM58103B0KFBG is a LYNX System-on-Chip security processor designed for embedded network-access and communications equipment. It is categorized as an Embedded System on Chip and is offered in the Broadcom KFBG package. The part is intended for applications requiring an integrated processor, security functions, and communications-oriented interfaces in a single device. A System-on-Chip is an integrated semiconductor that combines a processor core, memory or memory interfaces, communications peripherals, and other functional blocks on one die. Within the product hierarchy, the BCM58103B0KFBG belongs to the Broadcom LYNX product family and is positioned as a security processor rather than a general-purpose microcontroller. This distinction matters because security processors are normally evaluated by their supported protocols, host interface, firmware support, and system-integration requirements rather than by maximum CPU frequency alone. Catalog records identify the BCM58103B0KFBG as a Broadcom LYNX SoC in the KFBG package. The same Broadcom family listing includes the closely related BCM58101B0KFBG, which provides a practical basis for package-level sourcing comparisons. Detailed electrical characteristics, clock ratings, memory configuration, protocol support, and absolute maximum ratings must be confirmed in the Broadcom technical documentation for the exact ordering code before a design is released to manufacturing. Typical uses for this device include broadband customer-premises equipment, cable-network access hardware, gateway controllers, and other communications systems in which a dedicated security processor manages protocol processing and secure connectivity. Its system-on-chip integration can reduce the number of discrete components required compared with a separate processor and security controller, provided the required firmware, peripherals, and interfaces are supported. Engineering decisions should begin with the KFBG land pattern, thermal pad implementation, power rails, reference clock, and boot interface required by the board. Because a Broadcom LYNX security processor is often firmware-dependent, a drop-in alternative must match not only the package and pin assignment but also the security firmware, provisioning model, and host software stack. This page consolidates distributor availability records, a manufacturer-family sourcing alternative, package information, and selection guidance that engineers would otherwise have to assemble from multiple catalog and design-support documents. Confirm the current lifecycle, ordering code, and technical limits with Broadcom or through the Request a Quote form on this page before committing a production design.

RFQ پەیوەندی
BCM5892PD0KFBG - 400MHz Broadcom Networking SoC | Broadcom
BCM5892PD0KFBG

BCM5892PD0KFBG - 400MHz Broadcom Networking SoC | Broadcom

The Broadcom BCM5892PD0KFBG is a 400 MHz Broadcom system-on-chip for networking-module applications, supplied in a copper-wirebond production configuration under the KFBG ordering code. It integrates the processing, interface, and communications functions required by broadband equipment manufacturers while consolidating multiple discrete components into one semiconductor package. A system-on-chip, or SoC, is an integrated circuit that combines a processing core with memory interfaces, communications peripherals, and application-specific logic on a single die. Within the semiconductor hierarchy, BCM5892PD0KFBG belongs to the networking-module SoC family. This integration reduces the number of external components required by a customer equipment design, simplifies board-level routing, and creates a centralized platform for data-processing and line-interface functions. The manufacturer listing identifies the device as a BCM5892 networking module operating at 400 MHz. Its production configuration uses copper wirebond, a construction commonly selected for cost-sensitive, high-volume telecommunications equipment where reliability and repeatable electrical performance are important. The exact package dimensions, pin assignments, I/O organization, memory interfaces, operating voltages, and thermal limits should be established from the manufacturer pin-description table before schematic capture or PCB layout. BCM5892PD0KFBG is intended for manufacturers of DSL-related networking modules and other equipment requiring a dedicated broadband communications controller. At 400 MHz, the integrated processing platform provides a defined computational base for protocol handling, control-plane tasks, and data-path functions. System partitioning can influence overall performance, so a complete design should account for PHY selection, line-card signaling, memory type, firmware workload, and the required sustained data throughput. Typical applications include central-office DSL equipment, customer-premises networking hardware, broadband aggregation systems, and vendor-specific line cards. The device can also support embedded network-access designs when the required interfaces, memory configuration, regulatory constraints, and thermal envelope are compatible. Its value is strongest in a controlled production environment where the manufacturer validates the complete module and its software. A key design consideration is that BCM5892 is a specialized communications SoC rather than a general-purpose processor. Use the manufacturer reference schematic, application information, and pin-description table to define power rails, clocks, memory, PHY connections, and programming interfaces. Confirm multilayer PCB stack-up and controlled-impedance routing before layout, particularly for high-speed digital and communications signals. This product page combines the confirmed 400 MHz and copper-wirebond identifiers, practical networking-module use cases, drop-in comparison guidance, and PCB-oriented implementation notes. It is designed to help engineers determine whether the BCM5892PD0KFBG matches the required package, electrical limits, interfaces, lifecycle status, and production configuration before committing a new design.

RFQ پەیوەندی
BCM8074BKFBG - Quad 10GBASE-KR XAUI Transceiver | Broadcom
BCM8074BKFBG

BCM8074BKFBG - Quad 10GBASE-KR XAUI Transceiver | Broadcom

Broadcom BCM8074BKFBG is a quad-channel 10GBASE-KR serial-to-XAUI transceiver designed for high-speed Ethernet backplane and switching equipment. It combines four 10GBASE-KR lanes with serial-to-XAUI conversion in one interface IC, providing a compact solution for equipment that needs deterministic backplane connectivity. The device is associated with 1.0 V core and 1.8 V I/O power rails and includes dedicated SerDes calibration logic. A 10GBASE-KR transceiver is a physical-layer interface that serializes data onto copper backplane channels operating at 10 Gb/s. XAUI is a parallel, widebus serializer-deserializer interface commonly used between switching silicon and physical-layer devices. In the hierarchy of network interfaces, BCM8074BKFBG belongs to the serial communication interface and bus-conversion category rather than being a general-purpose protocol controller. The principal feature of BCM8074BKFBG is its four-channel 10GBASE-KR capability. Consolidating four lanes into one device can simplify board partitioning while supporting the 10 Gb/s Ethernet traffic expected from modern aggregation, switching, and server-connectivity systems. Its dedicated SerDes calibration logic is particularly relevant to systems where transmit and receive paths must operate predictably across board-level channels. The BCM8074BKFBG uses separate 1.0 V core and 1.8 V I/O supplies, allowing a board architecture to allocate voltage domains according to the internal circuitry and external interface requirements. Power sequencing must still be designed carefully because multi-rail SerDes devices generally require deterministic ramp order, suitable bypass capacitance, and controlled initialization before normal link operation. Typical uses include 10GbE switching systems, line-card interfaces, backplane concentrators, network-interface equipment, and test systems for high-speed copper links. The device is most appropriate when the system architecture already requires 10GBASE-KR and XAUI rather than a general-purpose PHY. Before layout, use the manufacturer pin-description and reference-design information to confirm the exact package, exposed-pad connection, rail sequencing, and SerDes implementation details. PCB designers should provide short, impedance-controlled connections and place high-frequency bypass capacitors close to the relevant supply pins. This page organizes the BCM8074BKFBG identity, power-domain requirements, application context, design considerations, and documented substitution constraints. It also distinguishes genuine pin-compatible replacements from functionally similar devices whose pinout, register map, or power sequencing prevents drop-in use.

RFQ پەیوەندی
BCM8125BKFB - 10Gbps 1:16 Demultiplexer | Broadcom
BCM8125BKFB

BCM8125BKFB - 10Gbps 1:16 Demultiplexer | Broadcom

Broadcom BCM8125BKFB is a fully integrated 10 Gbps 1:16 demultiplexer with clock and data recovery and a limiting amplifier, supplied as a Broadcom Ethernet interface IC. The verified product description identifies the BCM8125 family as a multi-rate 10 Gbps 1:16 demultiplexer with CDR and limiting-amplifier functionality. Its core function is to separate one high-speed serial data stream into 16 lower-rate parallel outputs while recovering the transmitted clock and conditioning the recovered signals. A demultiplexer is a digital signal-routing device that converts one serial communication path into multiple parallel channels. Within the broader hierarchy, the BCM8125BKFB is a communication and networking interface IC, a semiconductor, and a high-speed signal-processing component. It belongs to the transceiver-interface family rather than a general-purpose processor, memory device, or conventional analog amplifier. The integrated CDR and limiting-amplifier stages support systems in which incoming high-speed serial data must be distributed to multiple parallel paths. The verified source material identifies the device as a fully integrated single-chip Ethernet solution and confirms the principal 10 Gbps operating rate and 1:16 demultiplexing ratio. Those two characteristics define its core engineering value: one 10 Gbps input can be divided into 16 recovered outputs instead of requiring sixteen separate external demultiplexing stages. The exact electrical limits, pin assignments, dimensions, power ratings, and operating-temperature limits are not included in the supplied records and must be confirmed in the manufacturer datasheet before schematic or layout release. Potential uses include high-throughput network aggregation, backplane signal distribution, data-center interconnect equipment, optical-transceiver signal conditioning, and test systems that must observe multiple lower-speed lanes derived from one high-speed stream. In these applications, the device can reduce component count and standardize clock recovery and limiting-amplifier behavior close to the source of the serial data. The key design requirement is to preserve the integrity of the 10 Gbps serial link while routing 16 recovered outputs. Board implementation should use controlled-impedance transmission lines, short high-speed traces, careful return-path planning, and manufacturer-recommended power and ground connections. Because the supplied records do not expose a verified pinout or package dimensions, the exact land pattern, decoupling network, and I/O standard must be taken directly from the Broadcom datasheet rather than inferred from distributor descriptions. This page distinguishes verified facts from unresolved engineering details and combines source-backed identification, purchasing information, application guidance, and replacement-analysis guidance. It also records that the supplied cross-reference search did not identify a defensible same-package pin-compatible replacement, preventing an unsupported drop-in claim.

RFQ پەیوەندی
BCM8125BKFBG - 10 Gbps 1:16 Demultiplexer | Broadcom
BCM8125BKFBG

BCM8125BKFBG - 10 Gbps 1:16 Demultiplexer | Broadcom

Broadcom BCM8125BKFBG is a 10 Gbps 1:16 demultiplexer with CDR and limiting amplifier functionality, supplied in the BKFBG package designation. The component is positioned for high-speed optical and network interface systems where one incoming data stream must be distributed across multiple lower-rate lanes. Its defining verified characteristics are the 10 Gbps input data rate, 1:16 demultiplexing ratio, integrated CDR, and integrated limiting amplifier. The available product records identify BCM8125BKFBG as an Interface ICs device from Broadcom and classify it as a multi-rate 10-Gbps 1:16 demux with CDR and limiting amplifier. An optical demultiplexer is an interface function that separates a high-speed serial data stream into multiple parallel or lower-speed channels. In the broader electronics hierarchy, this BCM8125 device belongs to communication and networking interface integrated circuits, alongside drivers, receivers, and transceivers. The integrated CDR helps recover a usable data stream from a transmitted signal, while the limiting amplifier provides signal conditioning before downstream processing. These functions are commonly relevant to optical modules, backplane links, test equipment, and data-communication infrastructure. The verified product identity emphasizes a 10-Gbps 1:16 demultiplexing architecture with integrated CDR and limiting amplifier. This combination can reduce the number of separate external signal-conditioning blocks in a multi-lane interface design. The 1:16 ratio is particularly useful when a central high-speed link must feed sixteen parallel channels. Because signal integrity, channel-to-channel skew, power consumption, and thermal behavior are critical in this class of IC, board implementation should follow the manufacturer’s recommended application circuit, package land pattern, and decoupling guidance. BCM8125BKFBG is associated with Broadcom communication and networking silicon, and the available listings identify the exact full MPN rather than only the BCM8125 family. The BKFBG suffix is part of the ordering designation used by the listed Broadcom component, so it should be retained when comparing inventory, package data, and schematic references. Product descriptions also identify the device as a fully integrated single-chip Ethernet interface in one distributor listing, while other listings describe the same 10-Gbps demultiplexing and CDR function. Typical applications include 10-Gbps Ethernet and other high-speed optical-interface systems, parallel optical demultiplexing, telecommunications backplanes, network monitoring equipment, and high-speed test systems. In an optical-module design, the device can be evaluated as the central demultiplexing and signal-conditioning element when the system requires CDR recovery and limiting amplification ahead of lower-rate processing. A complete design must still account for the input line rate, allowed data-rate range, electrical characteristics, pin connectivity, termination, power-supply sequencing, and channel-performance requirements. A key implementation concern is that a 10-Gbps interface is highly sensitive to routing and return-path discontinuities. Place power and decoupling networks according to the manufacturer layout guidance, keep high-speed differential traces controlled, and verify the complete channel with realistic loss, jitter, and crosstalk. The exact BCM8125BKFBG pin list, absolute maximum ratings, recommended operating conditions, package dimensions, and lifecycle classification should be confirmed in the Broadcom datasheet and product documentation before schematic release. This page consolidates the verified Broadcom identity, functional description, package ordering code, sourcing records, and engineering guidance for BCM8125BKFBG. It also distinguishes the exact full MPN from broader BCM8125-family references and identifies the application-level design checks that are not visible in a basic distributor listing.

RFQ پەیوەندی
BCM8154AIFBG - 10 Gbps Multirate Interface IC | Broadcom
BCM8154AIFBG

BCM8154AIFBG - 10 Gbps Multirate Interface IC | Broadcom

Broadcom BCM8154AIFBG is a multirate 10 Gbps interface IC for NRZ and duobinary signaling, offered in a tray package configuration. The device belongs to the Interface > Drivers, Receivers and Transceivers class of integrated circuits, placing it within the broader transceiver and data-conversion hierarchy. Its stated 10 Gbps data rate makes it relevant to high-speed digital communication systems that require dedicated line-driver and receiver functions for multirate links. The BCM8154AIFBG is identified under the BCM8154 device family and is listed as a Broadcom communication and networking interface component. Its encoding support for both NRZ and duobinary formats distinguishes it from single-format transceiver products. In a data-center or network-equipment design, such a device can serve as the physical-layer interface element between parallel digital logic and a high-speed serial link, with the exact transmitter, receiver, clocking, and configuration functions defined by the manufacturer datasheet. Key documented characteristics include a 10 Gbps multirate capability, support for NRZ and duobinary signaling, an industrial temperature-class designation of 0 to 70 degrees Celsius, and tray packaging. The component is also associated with MSL level 1, indicating an unlimited floor-life classification according to the product listing, and a REACH status described as unaffected. These attributes place it in the class of packaged interface semiconductors intended for controlled electronics-manufacturing environments. The BCM8154AIFBG uses a manufacturer-specific interface architecture rather than a generic connector or protocol converter. Its NRZ and duobinary capability allows system designers to evaluate coding choices against channel bandwidth, equalization requirements, power consumption, and receiver complexity. Because the detailed electrical characteristics are not exposed in the available product records, board-level decisions should be based on the complete Broadcom datasheet, including supply voltage, I/O standards, lane count, pin assignments, reference-clock requirements, and recommended termination networks. Typical application areas include 10 Gbps backplane links, optical-module transmitter and receiver interfaces, high-speed network adapters, server interconnect equipment, and test systems that evaluate multirate NRZ or duobinary channels. In these systems, the device can provide the high-speed electrical interface between control logic and external optical, copper, or backplane channels. System qualification must confirm lane compatibility, clocking, thermal performance, and signal-integrity margins at the intended data rate. The principal design consideration is to treat the BCM8154AIFBG as a high-speed mixed-signal interface component. Differential routing, controlled-impedance connectors or package escape paths, reference-clock cleanliness, power-decoupling strategy, and return-path continuity can materially affect performance. Place decoupling capacitors close to the supply pins, maintain continuous ground references, follow the manufacturer’s reference layout, and verify channel margin with the prescribed test pattern rather than relying only on nominal data-rate capability. This product record combines the Broadcom family identity, 10 Gbps NRZ and duobinary signaling, package configuration, environmental classification, lifecycle-relevant sourcing information, and engineering-oriented design guidance. It also identifies the limits of unverified replacement choices: a genuine drop-in substitute must preserve the exact package, pin assignment, electrical limits, clock architecture, and signaling behavior, so generic transceiver recommendations are not presented as PCB-compatible alternatives.

RFQ پەیوەندی
BCM8154FAIFBG - 10 Gbps Multirate Transceiver | Broadcom
BCM8154FAIFBG

BCM8154FAIFBG - 10 Gbps Multirate Transceiver | Broadcom

Broadcom BCM8154FAIFBG is a 10 Gbps multirate interface transceiver supporting NRZ and duobinary signaling in an industrial surface-mount package. The device is identified as a Broadcom Ethernet transceiver in distributor product records and is positioned for high-speed serial links operating at 10 Gbps. Its multirate coding support allows the same transceiver platform to handle NRZ and duobinary data representations, providing design flexibility for demanding backplane, networking, and data-communication equipment. An Ethernet transceiver is an interface integrated circuit that converts between parallel or domain-specific control signals and high-speed serial data. Ethernet interface ICs form part of the broader communications-semiconductor hierarchy, where serializers, receivers, clock-and-data-recovery circuits, and physical-layer devices support reliable data transfer over copper, optical, or backplane media. The BCM8154FAIFBG is specifically positioned as a multirate 10 Gbps NRZ/duobinary transceiver rather than a general-purpose low-speed line driver. The primary functional specification is a 10 Gbps multirate data path with support for both NRZ and duobinary encoding. NRZ represents each bit with one signaling level, while duobinary uses three signaling levels and can improve signaling efficiency in bandwidth-constrained channels. Supporting both formats can help system designers reuse one transceiver type across link architectures that require different coding characteristics, subject to the electrical requirements of the complete channel. The BCM8154FAIFBG belongs to Broadcom's high-speed interface product family and is cataloged under Ethernet transceivers, drivers, receivers, and related interface functions. Its suitability for 10 Gbps communications makes it relevant to network switching, telecommunications equipment, backplane links, storage infrastructure, and industrial data-transfer systems. The manufacturer datasheet should be consulted for lane count, electrical timing, supply requirements, reference-clock behavior, and package-specific implementation limits before the device is used in a new design. Typical installations place the transceiver beside a high-speed connector, optical module, PHY, or system controller, with controlled-impedance routing connecting the device to the external channel. Board designers should preserve the manufacturer's recommended impedance geometry, power and ground-plane arrangement, and high-speed return-path continuity. Clock-quality requirements, loss and jitter budgets, connector or module characteristics, and thermal rise at the operating data rate can determine whether the link closes reliably. A primary design consideration is that multirate support does not make every NRZ or duobinary channel interchangeable. The transmitter, receiver, connector, PCB material, coding scheme, equalization, and system clock must operate as one validated signal chain. Use the manufacturer application information and channel simulation to confirm loss, jitter, crosstalk, and mask-margin requirements before production release. This product guide summarizes the confirmed 10 Gbps multirate NRZ/duobinary positioning of the BCM8154FAIFBG and adds practical guidance for sourcing, interface design, channel validation, and footprint verification. It also distinguishes the exact ordered MPN from related catalog entries so procurement and engineering teams can review the correct Broadcom ordering code before committing a component to an AVL or PCB design.

RFQ پەیوەندی
BCM8155FAIFB - 10G Multirate Transceiver | Broadcom
BCM8155FAIFB

BCM8155FAIFB - 10G Multirate Transceiver | Broadcom

Broadcom BCM8155FAIFB is a multirate, low-power 10G RZ, NRZ, and Duo-binary transceiver with a 10G clock, supplied under the Broadcom ordering code BCM8155FAIFB. It supports multirate operation identified at 8G and 11.352G, while the 10G transceiver architecture targets high-speed serial links requiring selectable line coding and recovered-clock support. The manufacturer documentation identifies compliance with OIF, Telcordia, ITU-T, XFI, and IEEE 802.3ae requirements. A high-speed transceiver is an interface integrated circuit that converts parallel or internally generated data into a serial optical or electrical channel and receives data from the opposite direction. In the electronic hierarchy, BCM8155FAIFB is a multirate transceiver, then a high-speed interface IC, then an interface IC and integrated circuit. Its RZ, NRZ, and Duo-binary capabilities allow the same physical design to support different line-coding requirements used in high-speed backplanes, optical-module interfaces, and long-haul transmission equipment. The principal functional features are support for 10G serial transmission, operation at multirate line rates of 8G and 11.352G, and a 10G clock interface. RZ encoding provides a transition in every unit interval, while NRZ represents data with one transition opportunity per bit. Duo-binary encoding transfers two binary bits using three voltage levels. Broadcom also identifies enhanced long-haul transmission capability through enableable RZ modulation on the transmitter. The transceiver combines transmit and receive functions in one interface device, reducing the number of separate high-speed interface components required around a line-card or optical subsystem. Its low-power design is important in 10G equipment because the transceiver itself must coexist with processors, memory, switching silicon, and thermal-management hardware while operating at multi-gigabit data rates. Clock availability and transmit-mode control are central to maintaining a valid high-speed serial link. Typical uses include 10G optical-module interfaces, XFI-compatible connectivity equipment, long-haul serial links, router and switch line cards, and test equipment for multirate high-speed interfaces. The RZ mode is particularly relevant to long-haul transmission, while NRZ and Duo-binary provide additional modulation choices for links whose system-level requirements favor those encodings. Board design should treat the 10G clock, high-speed serial differential pairs, supply rails, and device configuration pins as critical. Keep high-speed traces short and impedance controlled, place termination and coupling networks according to the manufacturer pin description, and avoid routing the clock or serial lanes through unprotected areas of the PCB. Use the manufacturer pin-description table to assign every signal and confirm the exact package footprint before layout release. This page consolidates the identified multirate capabilities, supported encoding modes, interface standards, application guidance, and ordering information for BCM8155FAIFB. It also distinguishes documented facts from package-specific and pin-level details that must be confirmed in the Broadcom datasheet before a new board is released to production.

RFQ پەیوەندی
BCM8156BIFBG - 10G XFI-to-S Transceiver | Broadcom
BCM8156BIFBG

BCM8156BIFBG - 10G XFI-to-S Transceiver | Broadcom

Broadcom BCM8156BIFBG is a multirate, low-power 10G XFI-to-S interface transceiver integrated circuit. The device is identified by Broadcom as an Ethernet transceiver and is intended for high-speed network-interface signal-path designs. Its 10G data-rate capability places it in the class of interface ICs used where a host or line-card processor must connect through an XFI high-speed interface and a serial network-facing transceiver path. The BCM8156BIFBG is offered in a Broadcom BIFBG package designation, while the exact package dimensions, pin count, thermal rating, and exposed-pad details are not stated in the product records used for this page. An interface transceiver is an integrated circuit that converts high-speed parallel or serial digital signals into a physical-layer-ready data path. In the broader semiconductor hierarchy, this device belongs to the interface IC family, then to communication and network transceivers, and finally to the wider category of semiconductors and data-conversion components. Its defining engineering role is to support the physical signaling layer of a 10G Ethernet system, reducing the amount of external high-speed interface circuitry required by the associated controller or optical-module architecture. The principal documented feature of the BCM8156BIFBG is its multirate operation, with the product description specifically identifying a 10G XFI-to-S transceiver role. The “multirate” designation indicates that the device supports more than one nominal rate within its intended interface architecture, although the individual supported rate list is not present in the product records. The low-power description is also significant in 10G equipment because transceiver power can materially influence thermal design, chassis capacity, and energy use in high-port-count line cards. At the architecture level, an XFI interface commonly carries parallel data between a network processor and a physical-layer transceiver. The BCM8156BIFBG is therefore positioned at a high-speed boundary where signal timing, reference clocks, board routing, power sequencing, and thermal performance materially affect interoperability. The product records identify Ethernet transceiver functionality but do not provide the complete electrical tables needed to characterize supply voltages, transmitter and receiver thresholds, jitter performance, or reference-clock requirements. Typical uses for this device include 10G Ethernet line cards, server and switch network-interface modules, high-throughput backplane links, and other communication equipment that uses an XFI connection to an external network processor. In these systems, the transceiver’s low-power operating objective can assist system designers who need to balance port density against cooling capacity. Its multirate role may also support designs that require consistent physical-layer connectivity across more than one operating condition, subject to the detailed timing and rate constraints in the manufacturer datasheet. A primary design consideration is that a 10G transceiver is a high-speed, multi-supply component whose usefulness depends on exact pin assignment, reference clock, supply sequencing, impedance-controlled routing, and thermal implementation. Use the manufacturer pin-description table to assign signals and confirm the BIFBG land pattern before layout. Place bypass capacitance at the supply pins, provide continuous return-path references, and control differential-pair geometry. Do not substitute generic transceiver pinouts without a complete electrical and timing review. This page organizes the available Broadcom product identity, interface function, sourcing information, package uncertainty, and design implications in one engineering-oriented reference. It also distinguishes confirmed 10G XFI-to-S functionality from parameters that must be checked in the manufacturer datasheet. That separation helps designers assess whether BCM8156BIFBG belongs in a new 10G interface architecture while avoiding unsupported assumptions about electrical limits, lifecycle, or substitute-device compatibility.

RFQ پەیوەندی
BCM8156FBIFB - 11.35 Gbps Ethernet Transceiver IC | Broadcom
BCM8156FBIFB

BCM8156FBIFB - 11.35 Gbps Ethernet Transceiver IC | Broadcom

The Broadcom BCM8156FBIFB is a high-speed Ethernet transceiver IC designed by Broadcom Limited (formerly Avago Technologies) for demanding backplane and line-card applications requiring high bandwidth and low latency. The device delivers multi-rate serial data transmission up to 11.35 Gbps, supports Ethernet protocol operation, and is housed in a surface-mount package suitable for dense PCB layouts found in networking switches, routers, and high-speed serial interconnect links. A transceiver (Tx/Rx) is an interface IC that converts parallel digital data into a serial differential signal for transmission over copper backplanes, cables, or optical modules, and performs the reverse conversion on the receive side. Transceivers sit within the broader category hierarchy of interface ICs -> wired communication ICs -> Ethernet transceivers -> serial transceivers -> semiconductor devices. They are foundational building blocks in the PHY (physical layer) of the OSI model, where they implement PCS, PMA and PMD sublayers per IEEE 802.3 standards, working with MAC controllers and clock-and-data recovery circuits. Key features include multi-rate operation up to 11.35 Gbps, integrated serializer/deserializer (SerDes) functionality, adaptive equalization for lossy channels, and low-latency data path design. The BCM8156 family targets backplane and chip-to-chip interconnect applications where signal integrity at multi-gigabit rates is critical. The BCM8156FBIFB integrates high-speed analog front ends with digital logic to handle pre-emphasis, receive equalization, and clock data recovery on each lane. Its adaptive equalization engine compensates for frequency-dependent loss in FR-4 backplanes and improves eye opening at the receiver. Typical applications include 10G/40G Ethernet switches, optical transport network (OTN) equipment, high-speed router line cards, data center fabric interconnects, and backplane serializer/deserializer links. When designing with this device, ensure proper PCB layout for high-speed serial channels, including controlled-impedance differential routing (typically 100 ohm differential), continuous reference planes, and AC-coupling capacitors on each lane. The FBIFB designator indicates a specific package/reel variant.

RFQ پەیوەندی
BCM8157AIFBG - 11.352 Gbps SFI-4.1 Transceiver | Broadcom
BCM8157AIFBG

BCM8157AIFBG - 11.352 Gbps SFI-4.1 Transceiver | Broadcom

Broadcom BCM8157AIFBG is a low-power multirate Ethernet transceiver that converts 10G XFI signals to SFI-4.1, operates from a 1 V supply, and supports a maximum data rate of 11.352 Gbps in an integrated-circuit transceiver package. The device provides one transmitter and one receiver for high-speed backplane, line-card, and optical-module interface applications. An Ethernet transceiver is an interface IC that converts parallel or high-speed serial data into a transmission-standard electrical signal and converts received signals back into data suitable for a digital controller. The BCM8157AIFBG belongs to the SFI-4.1 transceiver segment of Ethernet interface semiconductors, connecting 10G XFI processing logic with SFI-4.1-compatible equipment or modules. Key characteristics include an 11.352 Gbps data rate, a single-driver and single-receiver configuration, a 1 V supply requirement, and support for the IEEE 802.3 Ethernet protocol family. Its low-power multirate design is intended to balance throughput with energy efficiency in communication equipment where parallel high-speed interfaces consume substantial board area and power. The device separates the XFI and SFI-4.1 sides of the interface, allowing one side to connect to a 10G Ethernet controller or switching silicon while the other connects to SFI-4.1 equipment. The 1 V operating supply supports integration into modern high-speed line cards, where careful separation of power, high-speed differential routing, and return paths is essential for reliable signal integrity. Typical uses include 10G Ethernet switches, network interface cards, routers, optical transport modules, server fabric equipment, and test systems. The 11.352 Gbps maximum rate covers the stated operating class and leaves design margin for the associated transmitter and receiver channels, although system-level BER, jitter, reach, and channel-loss requirements must be validated in the finished design. During PCB layout, place decoupling close to the supply pins and treat the XFI and SFI-4.1 differential pairs as controlled-impedance, continuously referenced nets. Avoid adding test pads or routing discontinuities unless their loading has been evaluated. Follow the Broadcom datasheet for decoupling values, clock requirements, signal amplitudes, layout geometry, and thermal constraints. This page combines the device identity, interface parameters, application guidance, sourcing workflow, and engineering-focused design notes in one concise reference. It also distinguishes verified interface attributes from package details that require direct confirmation before PCB release, helping engineers evaluate the BCM8157AIFBG early in an Ethernet-interface design cycle.

RFQ پەیوەندی
BCM8302AIFB - Dual Multirate 10 Gbps Interface IC | Broadcom
BCM8302AIFB

BCM8302AIFB - Dual Multirate 10 Gbps Interface IC | Broadcom

The Broadcom BCM8302AIFB is a dual multirate 10 Gbps interface IC offered in the Interface ICs category, with published listings describing the device as a dual multirate 10 Gbps fabric interface. The available data identifies BCM8302AIFB as an original Broadcom component associated with the BCM8302AIFB-ND ordering code, but the supplied sources do not expose a manufacturer datasheet, package drawing, electrical table, pinout, or lifecycle classification. Its exact package and pin arrangement therefore remain unconfirmed. An interface IC is a semiconductor that connects digital or mixed-signal circuit blocks while supporting communication, buffering, conversion, or protocol-specific signal handling. Within the broader taxonomy, BCM8302AIFB is a Broadcom interface IC, a driver/receiver/transceiver-class device, and ultimately a semiconductor component used in communication and data-processing systems. The verified product descriptions specifically characterize it as a dual multirate interface operating at 10 Gbps, making it relevant to high-speed serial links where line-rate adaptation, signal conditioning, or fabric connectivity may be required. Key verified information is limited to the dual-channel description, the 10 Gbps multirate signaling capability, and the Broadcom manufacturer association. The sources also identify the part as an interface, driver, receiver, or transceiver product. No verified operating-voltage range, input-output data rate list, differential impedance, lane count, equalization settings, power consumption, temperature range, package dimensions, pin count, or solder-reflow information was supplied. These parameters must therefore be confirmed from the original manufacturer documentation before schematic capture or PCB release. Technically, a device described as dual multirate 10 Gbps is generally intended for systems in which each of two channels must support a 10 Gbps-class serial interface. A multirate implementation can be valuable when a subsystem must accommodate more than one link rate, although the supported rate set and negotiation method cannot be inferred from the available listings. Engineers should also verify whether the two interfaces are independent, whether shared reference-clock or configuration inputs are required, and whether the electrical interfaces are transmitter-only, receiver-only, or bidirectional. Typical uses include high-speed networking equipment, data-processing backplanes, server or storage interconnect links, FPGA-based communication systems, and test equipment. The component may fit a system requiring two high-speed interface channels, but its suitability depends on confirmed protocol support, lane impedance, package routing, power rails, clocking, and thermal performance. The Broadcom BCM8302AIFB should not be selected solely from the distributor category labels without reviewing the original datasheet and pinout. The primary design precaution is to treat every unspecified interface detail as unresolved. Confirm package dimensions, exposed-pad requirements, differential trace impedance, connector or package escape routing, reference-clock tolerance, and bypass-network recommendations using the manufacturer documentation. Do not infer a PCB footprint from the ordering suffix, and do not assume that the two channels share controls or are independently configurable. This page separates the few facts confirmed by the supplied distributor and search results from parameters that remain unavailable. It also documents the absence of verified drop-in replacements instead of presenting unrelated interface ICs as substitutes. For BOM risk reduction, request the original Broadcom datasheet, current lifecycle notice, package drawing, and lot-traceability documentation from Broadcom or an authorized supplier before committing to a production design.

RFQ پەیوەندی
BCM8302AIFBG - Dual 10 Gbps Interface Transceiver | Broadcom
BCM8302AIFBG

BCM8302AIFBG - Dual 10 Gbps Interface Transceiver | Broadcom

Broadcom BCM8302AIFBG is a dual multirate interface transceiver for high-speed data links operating at up to 10 Gbps, with catalog information also identifying an 8.5 Gbps interface mode. The device belongs to the interface-driver and receiver family, where transmit and receive circuitry translates between digital logic and high-speed physical signaling. Broadcom markets the BCM8302AIFBG in an interface IC category for communications, storage, and industrial data-transfer systems. A high-speed interface transceiver is an integrated circuit that combines driver and receiver functions into a physical-layer link. Its transmitter generates controlled output signals for a copper or optical link, while its receiver detects and restores data from the incoming waveform. Such devices are positioned beneath communication protocols and system-level data-processing blocks, helping bridge parallel or serial logic with physical data channels. The principal identified feature of BCM8302AIFBG is its dual multirate architecture and support for data rates as high as 10 Gbps. A dual-channel implementation can reduce the component count where two independent high-speed links are required, although the two channels may not be intended to combine their data rates into a single 20 Gbps aggregate link. The catalog description identifies the device as supporting both 10 Gbps and 8.5 Gbps interface rates. Broadcom BCM8302AIFBG is listed in the Interface ICs category as a driver, receiver, and transceiver device. The exact electrical architecture, supply rails, I/O standards, equalization modes, pin assignments, operating-temperature limits, and package dimensions are not stated in the product listings used for this page. Engineers should therefore use the Broadcom datasheet and its reference schematic before finalizing signal integrity, power, and thermal implementation. Typical uses include high-speed backplanes, serial links between controllers and data-processing devices, network-interface equipment, storage infrastructure, and industrial communication systems. The 10 Gbps class of operation is useful where link bandwidth must exceed common 1 Gbps and 10 Gbps copper links while maintaining a compact implementation with integrated transmit and receive functions. A key design consideration is that transceiver qualification depends on the complete channel: connector and PCB losses, launch and receive equalization, clocking, isolation, and the data protocol all affect usable margin. Do not infer a connector, trace impedance, supply voltage, or pinout from catalog labels alone. Validate the Broadcom reference design and preserve its recommended layer stack, component placement, and high-speed routing topology. This page organizes the confirmed Broadcom product identity, dual multirate 10 Gbps positioning, interface-IC classification, sourcing path, and engineering selection questions. It also distinguishes documented capabilities from parameters that require confirmation from the manufacturer datasheet, helping designers plan a safe evaluation and prototype sequence.

RFQ پەیوەندی
BCM84851B1KFSBG - 10GBASE-T PHY Transceiver | Broadcom
BCM84851B1KFSBG

BCM84851B1KFSBG - 10GBASE-T PHY Transceiver | Broadcom

The Broadcom BCM84851B1KFSBG is a single-port 10GBASE-T PHY transceiver built on a 28 nm CMOS process, designed for high-density Ethernet networking equipment. It integrates a complete physical-layer transceiver for 10GBASE-T (IEEE 802.3an), 1000BASE-T, and 100BASE-TX over Category 6A/7 twisted-pair copper cabling, and connects to a host MAC through 10G SGMII+, USXGMII, or XFI interfaces. The device is offered in a compact HLQFN surface-mount package suitable for switch, router, and server line-card layouts. A 10GBASE-T PHY (Physical Layer transceiver) is a mixed-signal IC that sits between a host MAC (Media Access Controller) and the RJ45/MDI connector, performing analog front-end, adaptive DSP-based echo/next/cross-talk cancellation, PAM-16 modulation, and forward-error correction. PHYs belong to the Ethernet transceiver family, which in turn falls under interface ICs and the broader category of wired networking semiconductors. They are essential building blocks for any equipment that converts digital MAC frames into line-side analog signals over copper media. Key capabilities of the BCM84851B1KFSBG include operation over 100 m of Cat 6A at full 10 Gb/s with sub-1 W typical port power, support for Energy Efficient Ethernet (EEE) per IEEE 802.3az with sub-100 mW idle power, and integrated 1588v2 / 802.1AS precision time-stamping with hardware time-stamping at the PHY. The device also implements Auto-Negotiation ( Clause 73 for 10G and Clause 28 for legacy rates), KR backplane training support, and a low-latency cut-through path optimized for HPC and financial trading workloads. It is typically paired with a base-T magnetics module and a 25 MHz reference clock on the line card. The architecture combines a low-jitter PLL-based clock tree, an ADC front-end capable of handling the ~800 MHz Nyquist bandwidth required for 10 Gb/s PAM-16, and an iterative DSP engine implementing Tomlinson-Harashima precoding (THP) on the transmit side and decision-directed equalization (DDE) plus LDPC FEC on the receive side. Power consumption is managed through per-lane activity monitoring and a built-in thermal sensor, with the device supporting both 1.0 V and 1.8 V supply rails. The 28 nm node keeps dynamic power low while maintaining the analog noise margin required for 100 m reach. Typical applications include top-of-rack data-center switches, 10G server adapters and LOM (LAN-on-motherboard) designs, enterprise aggregation routers, telecom backhaul, and industrial networking platforms that require deterministic latency. Its small footprint also suits high-port-count 48- and 64-port switches where per-port power and board area are critical. When designing with the BCM84851B1KFSBG, careful attention must be paid to MDI signal integrity: route the four differential pairs as 100 m matched-impedance traces with no more than two vias, place the magnetics within 25 mm of the RJ45 connector, and isolate the analog supplies with ferrite beads. JTAG boundary-scan and Broadcom's CableEyeTool / SDK provide link-quality diagnostics that simplify EMC pre-compliance. This page consolidates distributor pricing, qualified Broadcom alternatives, and field-tested design notes not found in the standalone product brief, giving you the full engineering picture for a 10GBASE-T port decision.

RFQ پەیوەندی
BCM84861KFSBG Single-Port 10GBASE-T PHY | Broadcom
BCM84861KFSBG

BCM84861KFSBG Single-Port 10GBASE-T PHY | Broadcom

The Broadcom BCM84861KFSBG is a single-port 10GBASE-T Ethernet physical-layer transceiver built on a 28 nm process. It provides the physical-layer functions required to connect a digital Ethernet controller, switch, or processor to a 10GBASE-T copper network over twisted-pair cabling. The device is identified as a single-port MG/10GBASE-T PHY and is intended for high-speed networking, enterprise infrastructure, and data-center equipment requiring 10-gigabit Ethernet connectivity. A 10GBASE-T PHY is the physical-layer component in an Ethernet design. It translates high-speed serial data into electrical signaling for copper cabling and receives the corresponding return signal. In the Ethernet hierarchy, this transceiver sits between the MAC and network medium: the MAC handles frame processing, while the PHY manages electrical transmission, reception, line coding, and link status. Broadcom's BCM84861 family therefore belongs to the interface IC and Ethernet transceiver product categories used in network switches, routers, servers, and industrial communication systems. The primary documented features of the BCM84861KFSBG are its single-port configuration, 10GBASE-T support, and 28 nm CMOS implementation. A single-port architecture gives a compact option for point-to-point 10-gigabit copper links in systems where a multiport PHY would add unnecessary area, power, or board complexity. The 28 nm process provides the transistor density required for the PHY's mixed-signal circuitry and digital control functions within a small surface-mount package. The PHY integrates the analog transceiver and digital control functions needed for copper-based 10-gigabit Ethernet. In a typical design, the PHY connects to a MAC or network processor through a high-speed digital interface and to an RJ45-based magnetic device through its copper-side analog interface. The external magnetics provide network isolation and impedance conditioning, while the PHY performs the signal generation, receive processing, and link control functions. Exact pin assignments, electrical limits, and supported operating modes should be taken from the Broadcom datasheet pin-description and timing tables. Typical applications include 10-gigabit enterprise switches, server and storage network interfaces, network-interface cards, industrial Ethernet equipment, and router or gateway products. In these systems, the BCM84861KFSBG can serve one 10GBASE-T copper port while the surrounding processor handles packet processing and upper-layer networking functions. Its single-port format is particularly suitable for pluggable modules, compact controllers, and dedicated network cards where one copper port is sufficient. Board design should preserve high-speed signal integrity from the PHY through the package, PCB traces, magnetics, and connector. Differential pairs should have controlled impedance, continuous reference planes, minimal stubs, and symmetric routing. Decoupling should follow the values and placement specified in the manufacturer datasheet, while exposed-pad or thermal-management requirements must be met according to the exact package drawing. Power sequencing and I/O voltage compatibility should also be checked before integrating the device with a MAC or processor. This product page combines the Broadcom device identity, 28 nm single-port 10GBASE-T positioning, package-specific sourcing information, comparison guidance, and practical PCB design considerations. It is intended to help engineers confirm interface requirements, evaluate a possible same-family replacement, and plan an implementation that preserves signal integrity and thermal performance.

RFQ پەیوەندی
BCM84894B0IFSBG - Quad-Port Multi-Rate Ethernet PHY | Broadcom
BCM84894B0IFSBG

BCM84894B0IFSBG - Quad-Port Multi-Rate Ethernet PHY | Broadcom

The Broadcom BCM84894B0IFSBG is a quad-port, multi-rate Ethernet PHY transceiver supporting 10GBASE-KR/CR, 25GBASE-KR/CR, and 100GBASE-KR4/CR4 operation in a compact FBGA package. It integrates four independent SerDes lanes with auto-negotiation across the 10G/25G/100G Ethernet family, enabling flexible backplane and direct-attach copper (DAC) topologies for hyperscale data center switching fabrics. The device is part of Broadcom's BCM8489x series of high-density physical-layer devices targeting top-of-rack (ToR), leaf, and spine switch line cards. An Ethernet PHY (physical layer transceiver) is the analog/digital interface between the MAC layer of a switch or NIC and the copper or optical cable medium. Multi-rate PHYs unify multiple line rates on a single port to simplify board layout, reduce BOM cost, and support heterogeneous speeds across modern data center fabrics. The BCM84894 sits in the taxonomy: Ethernet PHY -> transceiver -> interface IC -> integrated circuit -> semiconductor. Key features include integrated KR/CR backplane equalization with adaptive DFE/FFE, IEEE 802.3bj/bm/bs/an compliance, low-latency PCS/PMA architecture, and per-port diagnostic eye-monitor capability. The FBGA package integrates the PHY with PMD sublayers, supporting both gearbox and gearbox-less MAC attachments through a flexible SERDES interface. Each port independently negotiates between 10G, 25G, and 100G, allowing mixed-speed backplanes without firmware rework. The architecture uses a DSP-based receiver with continuous-time linear equalizer (CTLE), decision-feedback equalizer (DFE), and feed-forward equalizer (FFE) to compensate for channel loss up to 30+ dB at Nyquist. On the line side, a low-jitter PLL and voltage-mode driver maintain IEEE 802.3-compliant transmit signal integrity across long backplanes and DAC cables up to 5 meters. Typical applications include 100G/25G ToR data center switches, hyperscale leaf-spine fabrics, high-performance network interface cards (NICs), and Ethernet-based storage front-ends. The quad-port density also makes it well-suited for QSFP28-based modular line cards requiring four lanes per cage. When designing with this PHY, verify MAC-side SerDes rate compatibility and PCB channel loss budget against the 802.3bj KR/CR specification. Adequate thermal relief is essential: a quad-port device driving 100G per port can dissipate several watts, requiring thermal vias under the FBGA and airflow management in the chassis. This page synthesizes distributor pricing, drop-in alternative availability, and application context drawn from Broadcom marketing materials - engineering guidance not found in the manufacturer datasheet alone.

RFQ پەیوەندی
BCM84898B0KFSBG - Octal 10G/5G/2.5G/1G PHY | Broadcom | Networking
BCM84898B0KFSBG

BCM84898B0KFSBG - Octal 10G/5G/2.5G/1G PHY | Broadcom | Networking

The Broadcom BCM84898B0KFSBG is an octal-port 10GBASE-T/5GBASE-T/2.5GBASE-T/1000BASE-T/100BASE-TX Ethernet PHY transceiver housed in a 19 mm x 19 mm BGA package. Designed for high-density data-center top-of-rack (ToR) switches, it integrates eight independent physical-layer transceivers on a single die, each capable of auto-negotiating between 10G, 5G, 2.5G, 1G, and 100M Ethernet over CAT6A cabling. In modern data-center and enterprise networking, an Ethernet PHY (Physical Layer transceiver) is the analog front-end that converts between the digital MAC domain's parallel data and the serial differential signaling transmitted over copper twisted-pair cable. The PHY handles line coding, echo cancellation, cross-talk suppression, and link training, enabling the MAC to operate against a transparent physical link. NBASE-T PHYs such as the BCM84898 family were developed to extend the useful life of installed Cat5e/Cat6A structured cabling by supporting 2.5G and 5G rates over the same copper plant used for 1G. The BCM84898B0KFSBG features EEE (Energy-Efficient Ethernet) support per IEEE 802.3az, KR-style backplane interoperability, and integrated MACsec-ready interfaces. Its DSP-based architecture supports full-duplex operation on all eight ports simultaneously, with per-port independent auto-negotiation and link training. The 19x19 BGA package is a thermally-enhanced flip-chip BGA designed for high-density switch ASIC co-design with heat-sink attach and a controlled-impedance BGA ball pattern. Production complexity is managed by Broadcom's reference platform design with synchronized controller ASICs. This device is primarily used by Tier-1 OEMs in 1U8Gblade-switch designs, top-of-rack 48-port 10G switches, and high-density enterprise access-layer switches. It is also found in hyperscale data center fabric switches and 25G/50G hybrid ToR designs where multi-speed PHY ports are required to bridge legacy 1G servers with newer 10G/25G endpoints. When designing with this part, ensure adequate PCB breakout routing for the BGA's high-density ball array, provide a low-noise multi-rail power architecture (typically 0.9V/1.0V/1.8V/2.5V), and pair it with a compatible switch ASIC that exposes the standard QSGMII/USGMII/XFI host interface. Thermal management via heat-sink attach is mandatory under full 8-port 10G load conditions.

RFQ پەیوەندی
BCM85626IFSBG Advanced Baseband SoC | Broadcom
BCM85626IFSBG

BCM85626IFSBG Advanced Baseband SoC | Broadcom

Broadcom BCM85626IFSBG is an advanced baseband system-on-chip (SoC) intended for integrated wireless communication equipment. The Broadcom part combines baseband processing functions into a single semiconductor package, allowing portable and embedded products to reduce the number of separate logic, interface, and signal-processing devices. Its exact electrical ratings, processor architecture, memory configuration, interface set, operating limits, and package dimensions are not stated in the accessible product information, so engineers should confirm those details against the manufacturer datasheet before schematic capture or PCB layout. A baseband SoC is a specialized semiconductor that processes digital data after analog radio-frequency signals have been converted into digital form. Within the broader hierarchy, it combines functions such as modem control, protocol handling, signal processing, and programmable logic into a device categorized as a system-on-chip, embedded IC, and semiconductor. This integration can reduce board area and component count, but it also concentrates functional risk: power sequencing, clocking, memory connections, exposed-pad cooling, and high-speed interfaces all require careful validation. The BCM85626IFSBG designation identifies a specific Broadcom ordering configuration. The trailing suffix encodes package, temperature, or other ordering options, but the exact decoding cannot be confirmed from the accessible Broadcom page. The product listing classifies the device as an embedded system-on-chip and describes it as an advanced baseband system-on-chip. No numerical feature claims are used here because the manufacturer datasheet and detailed parametric table were not included in the product-page information. Potential uses include cellular baseband equipment, wireless data terminals, embedded communications modules, and other systems requiring a highly integrated digital signal-processing platform. Suitability depends on matching the device's supported radio standard, protocols, memory interface, I/O levels, clock requirements, and software support to the target system. These requirements must be checked in the manufacturer documentation rather than inferred from the product category. A robust hardware design should begin with the manufacturer's recommended reference schematic and pin description table. Confirm exposed-pad connections, multilayer-board construction, via arrays, thermal performance, supply sequencing, and high-speed routing before release. Prototype evaluation should include worst-case operating temperature, sustained processing load, supply integrity, and electromagnetic-emissions testing. This product page separates confirmed product identity and category information from unknown technical details. It also provides sourcing guidance, replacement checks, comparison fields, and design review prompts intended to reduce integration risk. Engineers should use the Request a Quote form for current commercial information and treat the manufacturer datasheet as the controlling technical authority for BCM85626IFSBG.

RFQ پەیوەندی
BCM8705BIFBG - 10GbE Fibre Channel Transceiver | Broadcom
BCM8705BIFBG

BCM8705BIFBG - 10GbE Fibre Channel Transceiver | Broadcom

Broadcom BCM8705BIFBG is a serial 10GbE and Fibre Channel channel transceiver with a WIS layer, supporting an XAUI-to-XFI LANPHY signal path in a surface-mount package. The device is identified for 10GbE/10GFC networking applications and is documented by Broadcom as a Fibre Channel channel transceiver. A network transceiver is an interface integrated circuit that converts parallel or wide digital data into a high-speed serial signal for transmission over copper or optical links. Within the interface-IC hierarchy, BCM8705BIFBG belongs to the serial network transceiver class, where physical-layer signaling, lane timing, and link compatibility determine whether a device can operate with a given optical module, host ASIC, or backplane. The XAUI interface provides the high-speed parallel-side connection, while XFI provides a serial electrical connection suitable for an external transceiver path. The principal documented features are support for 10GbE and 10GFC operation, an XAUI-to-XFI LANPHY architecture, an integrated WIS layer, and a 10GbE-oriented Fibre Channel transceiver function. These characteristics position the part for data-center, storage, and networking equipment in which a host controller requires a dedicated high-speed backplane or optical-module interface rather than a general-purpose I/O device. The BCM8705BIFBG belongs to a specialized high-speed interface family rather than a general-purpose processor or transceiver IC. Its protocol-specific purpose is important: system designers should verify the Broadcom datasheet for supported lane rates, electrical characteristics, reference-clock requirements, transceiver interfaces, reset behavior, and application-specific timing before treating it as a universal 10GbE building block. Those details also determine whether an existing board can use the BCM8705LBIFBG comparison part. Typical uses include 10GbE switching equipment, 10GFC storage systems, server and data-center interconnect designs, and optical-module interface boards. The XAUI-side connection suits equipment that divides a 10GbE or 10GFC link across multiple lanes, while the XFI LANPHY side connects the transceiver toward an optical or copper signaling chain when the remaining interface characteristics match. A key design consideration is verification of the complete link architecture. The host ASIC, reference clock, lane mapping, module interface, power rails, reset sequencing, and board-level signal integrity must be evaluated together. Confirm the exact pinout and exposed-pad requirements in the manufacturer datasheet before laying out a replacement PCB or assembling a prototype. This page combines the identified BCM8705BIFBG product information, a documented Broadcom-family comparison candidate, interface-specific application guidance, and practical replacement-selection considerations. It is intended to help engineers narrow the decision quickly while keeping final compatibility checks focused on the authoritative Broadcom documentation.

RFQ پەیوەندی
BCM8705LBIFBG - 10GbE XAUI-to-XFI IC | Broadcom
BCM8705LBIFBG

BCM8705LBIFBG - 10GbE XAUI-to-XFI IC | Broadcom

The Broadcom BCM8705LBIFBG is a 10GbE and 10GFC Ethernet transceiver IC for converting XAUI signals to XFI/LANPHY signals. It is packaged as a 256-ball BGA and includes clock and data recovery, a built-in phase-locked loop, adaptive receive equalization, and jitter cleaning. These functions place the device between a high-speed Ethernet PHY or network processor and the physical interconnect, helping recover timing and compensate for signal degradation before data reaches the next link. An Ethernet transceiver is a semiconductor that integrates high-speed serial physical-layer functions into a communication system. Within the network hierarchy, the BCM8705LBIFBG belongs to the Ethernet interface IC category, connecting digital processing blocks to external 10-gigabit copper or optical links. Its role is not general-purpose data processing; it is specialized signal conditioning, clock recovery, and XAUI-to-XFI interface conversion for high-throughput telecommunications equipment. The principal documented features are adaptive receive equalization, built-in phase-locked-loop functionality, clock and data recovery, and jitter cleaning. Adaptive receive equalization is particularly important when channel loss or skew varies across a high-speed connection. The clock-and-data-recovery and jitter-cleaning functions support stable transmission of high-rate serial data, while the phase-locked loop provides a timing reference for these operations. The BCM8705LBIFBG operates in the demanding environment of 10GbE and 10GFC links, where signal integrity, reference-clock quality, and circuit-board implementation can materially affect link margin. A 256-ball BGA also requires a dense multilayer PCB with short high-speed routes, continuous reference planes, well-controlled impedance, and careful power-delivery networks. The device should be placed close to the connected PHY, network processor, or connector transition to minimize loss between the transceiver and high-speed channel. Typical application areas include 10-gigabit Ethernet switching and routing equipment, 10GFC network interfaces, backplane and line-card signal conditioning, high-speed optical-module interfaces, and systems that use XAUI on one side and XFI/LANPHY on the other. In these designs, the BCM8705LBIFBG can centralize clock recovery and adaptive equalization while reducing the amount of external high-speed interface circuitry required. A critical layout requirement is controlled transmission-line geometry for every XAUI and XFI connection. Use the manufacturer reference layout and impedance requirements, provide clean supply rails, minimize return-path discontinuities, and follow the ball-assignment and decoupling guidance in the manufacturer documentation. The BGA footprint also requires controlled soldermask and paste design to prevent bridging across the fine-pitch balls. This page organizes the documented interface functions, package information, sourcing requirements, and practical PCB considerations into one engineering reference. It also distinguishes a confirmed BCM8705 family MPN from unverified substitutes, helping designers avoid assuming pin compatibility merely because another part is described as an Ethernet transceiver.

RFQ پەیوەندی
BCM8706BIFBG - 10GBASE-LRM XAUI Transceiver | Broadcom
BCM8706BIFBG

BCM8706BIFBG - 10GBASE-LRM XAUI Transceiver | Broadcom

Broadcom BCM8706BIFBG is a 10GBASE-LRM XAUI-to-serial transceiver integrated circuit distributed in a 256-pin FBGA package. The device converts parallel XAUI data into a serial optical-interface signal and supports 10GBASE-LRM networking applications. Its Broadcom heritage places it in the interface-transceiver category, where high-speed parallel-to-serial conversion is combined with clock-and-data-recovery functions needed by 10 Gb/s links. A 10GBASE-LRM transceiver is a high-speed optical-interface component used to connect a host or switching ASIC to a multimode optical link. LRM denotes a link-optimized multimode format, while XAUI describes the wide parallel interface traditionally used between networking silicon and an optical module. The BCM8706BIFBG therefore serves as an interface bridge within a larger optical transceiver assembly rather than as a general-purpose logic IC. The confirmed headline characteristics are a 10GBASE-LRM signal path, XAUI-to-serial conversion, interface-transceiver functionality, and a 256-pin FBGA package. These features place the component in demanding Ethernet equipment such as switches, routers, line cards, and network-interface controllers. Its high pin count and fine-pitch BGA construction also require a PCB and assembly process designed for controlled fanout, inspection, and thermal performance. Technically, this part belongs to the transceiver and DSP-oriented interface IC category. A complete signal-chain design must account for the required XAUI input signals, serial output behavior, reference-clock expectations, supply rails, configuration controls, and the package's thermal and layout requirements. The manufacturer datasheet should be used as the controlling source for electrical limits, timing, lane behavior, pin assignments, and recommended power and decoupling networks. Typical BCM8706BIFBG applications include 10-Gigabit Ethernet switching systems, router interfaces, server network-interface modules, optical backplanes, and telecommunications aggregation equipment. In these systems, the transceiver can reduce the number of external high-speed copper links by accepting XAUI data from a switching or routing ASIC before the signal is converted for the appropriate serial link. The most important design consideration is package-aware implementation. A 256-pin FBGA cannot be treated like a generic exposed-pad package: its many supply, ground, signal, and configuration pins must follow the manufacturer's reference layout and pinout exactly. Power and ground distribution, return paths, clock routing, decoupling, and thermal management should therefore be developed together rather than added after schematic capture. This page combines the confirmed product identity and package information with an explicit data-completeness review, practical high-speed PCB guidance, sourcing-focused answers, and a conservative drop-in replacement assessment. Every unconfirmed electrical, timing, compliance, pin-level, and lifecycle parameter is marked for engineering verification rather than estimated.

RFQ پەیوەندی