Logic ICs
بەرهەمەکان (720+)
CD4059AM - Programmable Divide-by-N CMOS Counter | Texas Instruments
The Texas Instruments CD4059AM is a CMOS programmable divide-by-N counter IC with a 16-bit counter, positive-edge counting, and a 24-lead SOIC package. It divides an input frequency by any programmable integer from 3 to 15,999, producing an output pulse whose frequency is the input frequency divided by N. The counter uses five programming inputs to select the division ratio and includes a clock, reset, and output arrangement suitable for digital timing and frequency division. A divide-by-N counter is a sequential digital logic device that counts clock transitions and reaches a programmable terminal count before producing an output event. The CD4059AM belongs to the CD4000 CMOS logic family, where CMOS indicates complementary metal-oxide-semiconductor construction. In system terms, it is a programmable counter, a digital timing IC, and a member of the wider logic IC and clock-and-timing categories. Its primary purpose is to reduce an input clock into a lower, predictable frequency without requiring a microcontroller or discrete counter chain. The main engineering features are the broad programmable division range, 16-bit internal counting capacity, positive-edge operation, and 24-SOIC packaging. The programmable range allows a fixed board design to support several timing ratios simply by changing the logic states applied to the count-select pins. The CMOS implementation is suitable for digital systems where low static power and direct interfacing to other CMOS logic are important, although the exact timing and supply-current limits should be taken from the manufacturer datasheet for the operating condition being designed. The CD4059AM can be used for pulse-rate reduction, timer generation, clock division, sequential timing, digital measurement, and embedded control systems. It is especially useful when a stable clock must be converted into a slower periodic signal without consuming processor resources. In an industrial controller, it can divide a high-frequency system clock to produce a service-timing or sampling interval. In a laboratory instrument, it can reduce a reference clock for a programmable pulse output. The output pulse timing and reset behavior must be coordinated with the surrounding synchronous logic. The principal design consideration is ensuring that the programmed count remains within the permitted range of 3 to 15,999 and that the clock and reset inputs meet the datasheet timing requirements. Because the device is a fixed-function counter rather than a general-purpose programmable logic device, design changes requiring arbitrary counter widths, multiple independent channels, or complex arithmetic may be better served by a different logic family. The 24-SOIC package also requires a footprint with the correct pin pitch and exposed mechanical dimensions. This product page combines the manufacturer identification, counter-function description, programming limits, package information, pinout availability, practical applications, and design trade-offs for engineers evaluating the CD4059AM. It also distinguishes true same-footprint alternatives from parts that may be functionally similar but are not qualified as direct replacements.
CD4060AF/3 - 14-Stage CMOS Counter | Texas Instruments
The Texas Instruments CD4060AF/3 is a CMOS 14-stage ripple-carry binary counter and divider with an integrated oscillator, operating from 3 V to 12 V and supporting operation up to 4 MHz. The device is offered in a 16-pin CDIP package and counts on the falling edge. Its oscillator section can provide the clock source for a divider chain, while the 14 available binary outputs support frequency division, timing, and pulse-generation functions. A CMOS ripple-carry counter is a sequential digital logic device that increments or decrements its binary state on each active clock edge. The CD4060 family combines this counter function with an oscillator and divider outputs in one integrated circuit. In the system hierarchy, it belongs to the CMOS logic family, within counters and dividers, and ultimately within integrated digital logic ICs. Its ability to derive multiple divided clocks from one oscillator reduces the number of separate timing components required in timer and waveform-generation circuits. The principal features include 14 counter stages, a 4 MHz maximum operating frequency, a single counter element, falling-edge triggering, and a supply range of 3 V to 12 V. The RCA CD4060AF documentation describes a temperature range of -55°C to 125°C, making the family suitable for industrial and extended-temperature equipment where its qualification level permits. The counter also includes reset and oscillator-related terminals for initialization and clock-source control. Internally, the ripple-carry architecture propagates each count transition through successive stages. Outputs from Q0 through Q9 are normally used for relatively high division ratios, while the later stages provide division by progressively larger powers of two. When the internal oscillator is used, its timing accuracy depends on the external resistor and capacitor network, component tolerance, temperature behavior, and stray capacitance. These characteristics distinguish the CD4060AF/3 from ordinary binary counters that require a separate clock generator. Typical uses include digital timers, pulse generators, frequency dividers, delayed-event logic, clock qualification, and industrial control circuits. It is also useful as a frequency-divider stage in a larger timing chain because multiple binary outputs are available from the same package. When cascading counters, designers should account for propagation delay through the ripple stages and ensure that the downstream device has suitable setup and hold timing. The principal design consideration is power-supply and clocking discipline. Place the supply bypass capacitor close to VDD and VSS, keep oscillator components close to OSC IN and OSC OUT, and avoid long traces around high-impedance timing nodes. The 3 V to 12 V operating range supports legacy CMOS systems, but modern designs must account for the absence of modern-level input overvoltage tolerance unless the manufacturer confirms otherwise. This product page combines the CD4060AF/3 device identity, package information, operating limits, replacement considerations, application guidance, and practical implementation notes. It also identifies which technical attributes are established by the manufacturer documentation and which replacement details require comparison against the selected candidate's own datasheet.
CD4060AK3 - 14-Stage CMOS Counter | Harris Corporation
Harris Corporation CD4060AK3 is a 14-stage CMOS ripple-carry binary counter and divider with an integrated oscillator, supplied in a 16-terminal flat DFP package. The device counts in an upward direction and provides the counter and oscillator functions required for frequency division, timing generation, and periodic event generation. Its military temperature grade, asynchronous counting architecture, and 16-terminal ceramic package identify it as a legacy logic device intended for demanding timing and control systems. A binary counter is a sequential digital-logic component that stores a binary value and advances that value when it receives a clock edge. A ripple-carry counter uses the output of one stage to trigger the next stage. The CD4060 family combines this counter function with an oscillator, allowing an external timing resistor and capacitor to establish a base frequency that can be divided into lower-frequency outputs. Within the logic hierarchy, it is a counter/divider, then a logic IC, then an integrated circuit used for timing and control. The CD4060AK3 provides 14 counter stages, asynchronous up-counting, and a CMOS implementation. Its oscillator-capable architecture reduces the number of separate timing components required for divider and pulse-generation circuits. The 16-terminal DFP package also supports board-level procurement for legacy industrial, aerospace, and defense programs where an older package and qualification history may be necessary. Exact voltage limits, operating-current limits, propagation-delay limits, and output-drive characteristics should be taken from the manufacturer datasheet before final circuit release. Timing design must account for accumulated ripple delay across the selected counter stages. The oscillator frequency depends on the external resistance and capacitance, while each counter output advances only after preceding stages have propagated. This makes CD4060AK3 appropriate for low-to-medium-frequency division and periodic control rather than applications requiring zero-delay clocking or high-speed synchronous feedback. The unused counter outputs should be left unconnected, and all supply and ground pins must be connected according to the package pinout. Typical uses include industrial timer modules, instrumentation clock dividers, laboratory pulse generators, event-counting systems, and legacy control logic. In these applications, the device can create one or more divided timing signals from a single oscillator network, reducing sequential logic and allowing one timing source to serve several slower functions. The inherited ripple characteristic also means that output transitions are not simultaneous, so downstream circuitry should trigger from one designated stage rather than combining multiple outputs. For PCB construction, verify the land pattern for the 16-terminal DFP package and preserve the manufacturer-specified ceramic-capacitor footprint around the oscillator pins. Keep the oscillator timing loop compact and route it away from high-current switching nodes. Check supply sequencing, unused-pin treatment, and maximum operating voltage against the device qualification document. This page combines the exact CD4060AK3 package and catalog facts with practical oscillator, timing, and layout guidance to support legacy-design review and sourcing decisions.
CD4060BCM - 14-Stage Binary Counter | onsemi | SOIC-16
The onsemi CD4060BCM is a 14-stage ripple-carry binary counter and divider in a 16-pin SOIC package. It advances its count on the negative transition of each clock pulse and provides binary counter outputs for frequency division, timing, and clock-generation applications. The device is identified as a 14-bit, single-element, negative-edge counter IC, making it suitable for low-to-medium-frequency timing and divider circuits. A binary counter is a sequential logic device that records a number of clock transitions and presents that count through digital output stages. The CD4060B family combines a 14-stage ripple-carry counter with oscillator capability, placing it within the hierarchy of CMOS logic IC, counter/divider, digital logic, and semiconductor timing devices. Its negative-edge clock response and fixed divide stages help designers produce predictable frequency relationships from an input clock. The CD4060BCM is specified as a 4000-series CMOS counter/divider with a 16-pin SOIC format. Its operating temperature range is listed as -55°C to +125°C in the manufacturer-related datasheet information, making it suitable for industrial temperature environments when the circuit's voltage and timing requirements are met. The counter structure supports applications requiring binary-coded timing information, such as programmable timers, delay generators, pulse-rate dividers, and clocked sequencing systems. The CD4060BCM uses negative-edge clocking, so the output state changes when the clock input transitions from high to low. In a practical implementation, the oscillator section may use external resistors and a capacitor, or an external clock may drive the counter. Designers should account for ripple propagation across the 14 stages when the outputs are used as a coherent binary word, and should preserve adequate clock and output rise times in long-chain timing applications. Typical uses include industrial timer modules, frequency-divider circuits, pulse-counting instrumentation, periodic event generation, and embedded control systems requiring a compact binary counter. Because the CD4060BCM is a CMOS counter/divider rather than a general-purpose microcontroller, it can reduce firmware overhead when a fixed counter and divider function is sufficient. It is also useful as a building block in legacy CMOS designs where a known 16-pin SOIC footprint and established CD4060B behavior simplify maintenance. For new layouts, place decoupling capacitors close to the power pins and route clock and oscillator traces away from noisy switching nodes. Verify the allowable supply voltage, oscillator component tolerances, maximum clock frequency, and output load against the manufacturer datasheet before production. The CD4060BCM is best suited to designs that need deterministic binary counting rather than programmable arithmetic or bidirectional counting. This product page combines the manufacturer's counter description, package and temperature information, compatibility-oriented alternatives, and application-specific engineering guidance to support faster component selection and PCB design. It also highlights the distinction between a fixed CMOS ripple counter/divider and more programmable timing devices.
CD4060BCN - 14-Stage Counter and Oscillator | onsemi
The onsemi CD4060BCN is a 14-stage ripple-carry binary counter and oscillator integrated circuit operating from 3.0 V to 15 V, with 14 counter stages, negative-edge clocking, and a 16-lead PDIP package. It combines an internal oscillator, asynchronous reset, and multiple frequency-division outputs in one CMOS logic device. A binary counter is a sequential digital circuit that records a number of clock events as binary bits. The CD4060BCN belongs to the CD4000 CMOS logic family and advances on each negative transition of its clock input. Its oscillator can use an external resistor-capacitor network or crystal, while the counter stages provide divided clock outputs for timing and frequency-generation circuits. The device operates across a 3.0 V to 15 V supply range and features high noise immunity of 0.45 VDD typical. Its asynchronous reset is independent of the clock and returns the counter to zero when the reset input is driven to a logical 1. The integrated oscillator and divider architecture reduce the number of external components required in timer, pulse-generator, and low-frequency clock circuits. The CD4060BCN uses a ripple-carry implementation, so each internal stage transitions after the preceding stage. This structure is useful when multiple divided frequencies are required, but timing edges at the higher-count outputs include accumulated propagation delay. Clock-driven designs benefit from a clean negative edge at the clock input. When oscillator accuracy or stability is important, component tolerances and parasitic capacitance must be considered alongside the external RC or crystal network. Typical uses include RC or crystal oscillators, binary frequency dividers, periodic pulse generators, interval timers, low-frequency clock sources, and sequential control systems. The 16-lead PDIP package supports through-hole assembly and prototyping, while its 3.0 V to 15 V operating range accommodates legacy CMOS logic systems operating at 5 V or 15 V. When designing a divider, confirm that the selected output frequency meets the required timing accuracy and that the reset pulse is clean. Decoupling capacitors should be placed close to the supply pins, and unused counter outputs should remain properly terminated. This page consolidates operating characteristics, drop-in alternatives, comparison data, and application-focused design guidance for CD4060BCN selection.
CD4060BE - 14-Bit CMOS Counter | Texas Instruments
The Texas Instruments CD4060BE is a CMOS 14-stage ripple-carry binary counter, divider, and oscillator designed to operate from 3 V to 18 V. It provides 14 binary counter outputs, a negative-edge clock input, an oscillator section supporting RC or crystal timing, and a master reset that clears the counter outputs. The device is packaged in a 16-pin through-hole plastic DIP package. A CMOS binary counter is a sequential digital-logic device that advances an internal state when triggered by a clock edge. A ripple-carry counter connects multiple flip-flop stages so each output changes at a divided frequency derived from the preceding stage. The CD4060BE combines that counting function with an oscillator, allowing one package to generate a timing reference and divide it into multiple frequency outputs without requiring a separate clock source. The CD4060BE's key features include 14 counter stages, a maximum clock frequency of 24 MHz, operation across a 3 V to 18 V supply range, and a 16-pin plastic DIP package. Its oscillator can be configured for either RC timing or crystal timing. A master-reset input establishes the all-zero counter state, making the device useful when a defined startup state or synchronized clearing action is required. Internally, the counter is implemented as a chain of ripple-carry binary stages. Each output provides one binary bit of the accumulated count, while the stage spacing creates successively divided clock signals. The oscillator section supplies a convenient internal timing source for designs that do not need an external clock generator. Because this is CMOS logic, the supply voltage range supports both lower-voltage and higher-voltage system designs within the device's specified limits. Typical applications include binary event counters, frequency dividers, periodic-pulse generators, digital time bases, oscillator modules, clock-generation circuits, and industrial control or instrumentation systems. The oscillator-and-divider combination is especially useful when a system requires several related frequency outputs generated from one timing network. When constructing the circuit, keep oscillator components close to the OSC_IN and OSC_OUT pins, provide a clean and stable supply, and use a reset strategy that prevents invalid counter states during power-up. Crystal timing generally requires carefully selected load and stability components, while RC timing trades frequency precision for component simplicity. The 16-pin DIP package also requires adequate spacing around the device for socketed or hand-soldered assembly. This product page combines the manufacturer device description, distributor identification, cross-reference candidates, and application-oriented engineering guidance. It also distinguishes genuine 16-pin through-hole drop-in options from devices that use different package formats, helping designers shorten replacement work without overlooking pinout, voltage, or timing differences.
CD4060BK - 14-Stage CMOS Counter/Divider | Texas Instruments
The Texas Instruments CD4060BK is a CMOS 14-stage ripple-carry binary counter and divider with an integrated oscillator, operating from 3 V to 18 V and supporting operation up to 24 MHz in a 16-pin CFP surface-mount package. Its temperature rating extends from -55°C to +125°C. The device advances one count on each negative clock transition and provides 14 binary counter outputs, making it suitable for frequency division, timing, and clock-generation systems. A binary counter is a digital sequential circuit that stores and advances a count using binary-weighted stages. A divider extends this function by dividing an input frequency into a lower output frequency. The CD4000 CMOS logic family belongs to the broader logic IC and counter/divider hierarchy, combining low-power operation with wide supply-voltage flexibility. The oscillator and counter functions are commonly used together in timers, clock dividers, and programmable pulse-generation circuits. The verified CD4060B family data identifies 14 ripple-carry stages, operation from 3 V to 18 V, and a maximum clock frequency of 24 MHz. These ratings support both low-voltage logic systems and higher-voltage industrial or instrumentation environments. Its 16-CFP package offers a surface-mount option for compact assemblies, while the broad -55°C to +125°C temperature range supports demanding operating conditions. The ripple-carry architecture means each counting stage advances after the preceding stage, with the counter incrementing on the negative transition of the clock. Designers should account for accumulated propagation delay when dividing high frequencies or interpreting the relationship between clock edges and output transitions. The operating-frequency limit and external oscillator-component requirements must be checked against the manufacturer datasheet before establishing timing margins in a new circuit. Typical uses include divide-by-16 through divide-by-16384 clock generation, retriggerable pulse timing, periodic-event generation, and low-frequency clock derivation from a higher-frequency source. The oscillator pins can support an external resistor-capacitor network when stable autonomous operation is required, while an external clock can be applied when the system already provides a timing reference. PCB implementation should preserve short oscillator and clock paths, provide an unobstructed ground reference, and decouple the supply close to the device. Because the CFP-16 footprint is temperature- and package-sensitive, assembly should follow the manufacturer’s soldering and land-pattern recommendations. The verified source does not provide a complete pin-level table, so the final design should use the official CD4060B datasheet rather than an inferred pinout. This page consolidates verified manufacturer and distributor information, exact CD4060BK pricing evidence, package and environmental ratings, application guidance, and data-gap disclosures. It distinguishes documented facts from unavailable parameters and avoids presenting unverified substitute parts as drop-in replacements.
CD4060BM - 14-Bit Counter/Divider | Texas Instruments
Texas Instruments CD4060BM is a CMOS 14-stage ripple-carry binary counter and divider with an integrated oscillator section, a 14-bit count output, operation from 3 V to 18 V, and a maximum listed frequency of 24 MHz, all in a 16-pin SOIC package. It combines a binary counting chain with an oscillator capable of supporting resistor-capacitor or crystal-based timing networks, making it suitable for digital frequency division, timing generation, and clock-derived waveforms. A CMOS binary counter is a sequential logic device that increments a binary value on each active clock transition. The CD4060BM belongs to the counter and divider hierarchy, within logic ICs and digital timing ICs. Its ripple-counter architecture provides multiple frequency-division outputs, while the oscillator section determines the source frequency used by the internal counting stages. This combination can reduce the need for separate oscillator and divider components in low-to-moderate timing systems. The verified device information identifies a 14-stage ripple-carry architecture, a 14-bit counter output, 3 V to 18 V supply operation, and operation up to 24 MHz. The 16-SOIC package is a surface-mount package from the SOIC family. The counter uses negative-edge triggering, as identified in the DigiKey listing, which must be considered when connecting it to external clock and reset circuitry. Individual timing-pin and output-pin assignments are not available in the supplied source snippets. The CD4060BM architecture is useful when a system needs several divided versions of one clock. Each ripple stage provides a progressively divided frequency, allowing a design to obtain multiple timing references without cascading separate divider ICs. Because the device is implemented in CMOS, it belongs to the low-power logic family and can be used in battery-operated or low-leakage digital systems when operated within the documented voltage and frequency limits. Typical uses include digital clock dividers, pulse-generation circuits, industrial timing modules, periodic-event generators, microcontroller clock subsystems, waveform counters, and laboratory timer boards. In these applications, the integrated oscillator reduces component count, while the divided outputs provide convenient frequencies for counters, displays, control logic, or communication timing. External component selection determines whether the oscillator uses an RC network or a crystal-based arrangement. Designers should verify oscillator-component values, output-drive requirements, reset timing, and unused-output handling directly against the TI CD4060B datasheet. Maximum operating frequency varies with supply voltage and operating conditions, so a 24 MHz design should not be assumed to work identically across the complete 3 V to 18 V range. Decoupling and unused-input treatment should also follow the manufacturer's recommendations. This product record combines verified manufacturer, distributor, and cross-reference information with practical selection guidance, packaging details, pricing context, and an honest assessment of drop-in replacement availability. It distinguishes documented electrical facts from parameters that still require confirmation from the complete manufacturer datasheet.
CD4060BMT - 14-Stage CMOS Counter | Texas Instruments
Texas Instruments CD4060BMT is a CMOS 14-stage ripple-carry binary counter/divider with an on-chip oscillator, housed in a 16-lead SOIC package. The device combines a 14-bit counter with oscillator, divider, and reset functions, providing 14 parallel binary outputs and one serial output. Its negative-edge counting behavior and positive RESET input make it suitable for timing, frequency division, and clock-generation circuits. A binary counter is a sequential digital circuit that records a number of input clock transitions as binary states. A ripple-carry counter uses each flip-flop stage to clock the next stage, while a divider circuit derives lower-frequency outputs by observing selected counter stages. The CD4060B belongs to the CMOS logic hierarchy, integrating counter, divider, and oscillator functions into one package rather than requiring separate timing components. The CD4060BMT provides a 14-stage counting architecture in a 16-lead SOIC package. Its oscillator section supports RC or crystal oscillator configurations, while the RESET input returns the counter outputs to the all-zero state and disables the oscillator. A high-level RESET signal initiates the reset function, allowing a system controller to establish a known timing state during startup or test. Internally, the counter stages are master-slave flip-flops, supporting stable state transitions as the ripple signal advances through the chain. The available outputs permit division by powers of two when the circuit is used as a frequency divider. This architecture is useful when a system needs multiple related timing divisions without requiring a programmable clock controller. Typical uses include digital timers, pulse-generation circuits, clock dividers, delay generation, frequency division, and general-purpose sequential control. The on-chip oscillator is particularly useful in autonomous timers where an external reference clock would add unnecessary components. For designs requiring deterministic frequency accuracy, the oscillator configuration and component tolerances must be evaluated against the required timing tolerance. When laying out a CD4060BMT circuit, keep oscillator components and the RESET trace away from sensitive high-speed nodes, and route each counter output according to its destination fanout. Long interconnects can increase susceptibility to capacitive coupling, particularly when several ripple stages operate simultaneously. The SOIC package supports conventional surface-mount assembly, but pin-1 orientation and output-state definitions should be checked against the manufacturer datasheet before PCB release. This product page combines the CD4060BMT device description, manufacturer documentation, procurement guidance, verified drop-in alternatives, comparison parameters, and practical implementation guidance. It is intended to help engineers identify the correct counter/divider, plan its oscillator and reset behavior, and evaluate replacement options without confusing terminal-function differences or package order codes.
CD4063BD - 4-Bit CMOS Magnitude Comparator | Harris
The Harris Corporation CD4063BD is a 4-bit CMOS magnitude comparator with eight comparison inputs, three active-high outputs, and three cascading inputs in a 16-pin ceramic dual in-line package. It compares two 4-bit binary or BCD words and reports whether the first word is less than, equal to, or greater than the second word. The device is designed for computer and logic applications that require unsigned magnitude comparison. A magnitude comparator is a combinational logic device within the broader digital comparator family. Its role in a digital system hierarchy is to examine parallel numerical words and generate control or status signals describing their relative order. The CD4063B belongs to the CD4000 CMOS logic family, whose members use complementary MOS logic and are designed for low-power digital systems operating from a common supply rail. The CD4063BD provides eight comparison inputs designated A3 through A0 and B3 through B0. Its three active-high outputs indicate A less than B, A equal to B, and A greater than B. Three cascading inputs allow multiple comparator sections to be combined, making the circuit useful when comparing widths greater than four bits. The ceramic DIP construction also distinguishes the BD grade from commercial plastic-package variants. Operationally, the comparator evaluates all four corresponding bit pairs and produces mutually related ordering outputs. In a cascaded design, the upper section compares the most significant four-bit word and passes the result to the lower section, where it is combined with the lower word comparison. This arrangement supports exact selection, sorting, address decoding, and numerical threshold functions without requiring a general-purpose processor to perform every comparison. Typical applications include digital counters, arithmetic control, industrial control systems, test equipment, address comparators, and embedded control logic. In an address-selection circuit, the comparator can assert an equality output when an input address matches a programmed reference word. In a cascaded magnitude-comparison system, multiple CD4063BD devices can compare wider operands while retaining the three standard ordering outputs at each section. Designers should account for CMOS input and output behavior, supply bypass capacitors, unused inputs, and propagation delay when cascading several stages. Inputs must not float, and every unused input should be tied to a defined logic level. Because the verified source data does not provide the complete electrical limits, pin numbering, or timing tables, those values require confirmation from the applicable manufacturer datasheet before release to production.
CD4063BE 4-Bit Magnitude Comparator | Texas Instruments
The Texas Instruments CD4063BE is a CMOS 4-bit magnitude comparator with eight binary or BCD comparison inputs, three active-high outputs, and cascading inputs in a 16-lead PDIP package. It compares two 4-bit words and indicates whether the A word is less than, equal to, or greater than the B word. The device is intended for computer and logic applications where arithmetic, sorting, address decoding, and control sequencing require a direct numerical comparison. A magnitude comparator is a logic IC that compares two multi-bit numeric operands and produces separate results for the less-than, equal-to, and greater-than conditions. In the digital electronics hierarchy, the CD4063BE belongs to the comparator and logic IC category, within the broader CMOS and semiconductor families. Its three outputs allow a system to respond immediately to the relationship between the two input words rather than performing the comparison through multiple gate-level operations. The CD4063BE provides a practical four-bit comparison function using binary or BCD-coded inputs. The active-high A<B, A=B, and A>B outputs make the results easy to combine with other CMOS logic. Three cascading inputs allow multiple comparator sections to be connected when the application requires comparison beyond four bits. The 16-lead plastic dual-inline package provides through-hole assembly and a conventional DIP footprint. Because the CD4063BE is a CMOS comparator, its design emphasizes low power consumption and compatibility with other CD4000-series logic. The device is suitable for digital control systems, industrial controllers, counters, sorting networks, and computer interface logic. The provided manufacturer and distributor information identifies the operating family as CD4063B and the E suffix as the 16-lead plastic dual-inline package option. Typical uses include comparing accumulated digital measurements, resolving priority among several encoded inputs, detecting when a counter has reached a threshold, and supporting arithmetic or sequencing logic. The cascading feature is particularly useful for larger designs, but propagation delay must be considered when multiple stages are combined. The principal design consideration is ensuring that all unused CMOS inputs are connected to a defined logic level and that supply and signal levels remain within the device’s specified operating limits. Because those voltage and timing values were not included in the supplied verified data, engineers should confirm them in the manufacturer datasheet before finalizing a design. Input and output decoupling and clean grounding remain important in systems containing switching noise. This product page combines verified manufacturer and distributor information with practical comparison guidance, replacement considerations, and design notes that are not consolidated in a single manufacturer document. It is intended to help engineers identify the correct logic function, package, sourcing route, and application fit before committing the CD4063BE to a PCB design.
CD4063BF - 4-Bit CMOS Magnitude Comparator | Texas Instruments
The Texas Instruments CD4063BF is a 4-bit CMOS magnitude comparator with eight binary or BCD comparison inputs, three comparison outputs, and three cascading inputs, packaged in a 16-CDIP ceramic dual-in-line package. The device reports whether word A is less than, equal to, or greater than word B and supports expansion through its cascade inputs. Its specified operating-temperature range is -55°C to +125°C, making the CD4063BF suitable for industrial, control, and legacy-compatibility applications where a wide temperature range is important. A magnitude comparator is a combinational logic circuit used to determine the relative ordering of two multibit numbers. Within the logic hierarchy, the CD4063BF belongs to the comparator and arithmetic-comparison category, the broader CMOS logic family, and ultimately the digital integrated-circuit and semiconductor categories. Unlike a dedicated arithmetic logic unit, a comparator provides only the relational result between two operands, making it useful for control sequencing, sorting stages, threshold decisions, and binary-to-BCD comparison systems. The CD4063BF accepts two groups of four comparison inputs labeled A3 through A0 and B3 through B0. Its primary outputs indicate A less than B, A equal to B, and A greater than B. Additional cascade inputs permit the comparison function to be expanded beyond four bits. The chip is also described as pin-compatible with the standard 7485 TTL magnitude comparator, which supports legacy board-level replacement planning when supply conditions or operating requirements need review. Technically, the CD4063BF belongs to the CD4000 CMOS logic family and is intended for computer and logic systems that compare binary or BCD words. The comparison is implemented as combinational logic, so output states follow the applied input states without a clock. Cascade control determines how the device participates in a wider comparison, allowing engineers to construct larger word-length comparators while preserving the same output convention. Typical uses include industrial sequencing and sorting control, binary or BCD decision logic, interface adaptation between older TTL and CMOS systems, and embedded logic where three relational states must be generated from two 4-bit operands. The -55°C to +125°C operating range also makes the device relevant to temperature-extended industrial equipment, although system-level supply, noise, and timing constraints must still be checked against the manufacturer datasheet. When designing around the CD4063BF, verify every voltage and timing value against the applicable manufacturer data before release. In particular, confirm the supply range, input and output propagation delays, output-drive capability, and unused-input states for the exact package and grade. Because the CD4063BF is a through-hole CDIP device, also allow for lead spacing, insertion clearance, and possible obsolete-part procurement risk. This product record combines the verified TI product description, package and temperature information, distributor availability evidence, and explicitly identified same-family alternatives. It also adds practical comparison guidance and design notes that distinguish a documented drop-in candidate from merely similar CMOS logic devices.
CD4063BK - 4-Bit Magnitude Comparator | Texas Instruments
The Texas Instruments CD4063BK is a CMOS 4-bit magnitude comparator that determines whether two 4-bit binary or BCD words are less than, equal to, or greater than one another. The device accepts eight comparison inputs through A3–A0 and B3–B0, provides three decision outputs for A<B, A=B, and A>B, and includes three cascading inputs so multiple comparator sections can be combined for wider word lengths. It is supplied in a 16-pin surface-mount package identified by the “K” package suffix. A magnitude comparator is a combinational logic circuit within the broader hierarchy of CMOS logic ICs, digital logic, and integrated circuits. It evaluates the numerical relationship between two unsigned operand groups without performing subtraction. This makes the CD4063BK useful when a digital system must make an immediate decision, select a value, sort records, determine equality, or control a downstream branch according to the relative magnitude of two data words. The verified manufacturer information identifies the CD4063B as a 4-bit magnitude comparator intended for computer and logic applications. Its eight comparing inputs represent two complete 4-bit words, while the A<B, A=B, and A>B outputs provide explicit relationship results. Three cascading inputs extend the architecture beyond four bits when larger comparisons are required. Exact propagation-delay, supply-voltage, output-current, and temperature limits were not included in the supplied source excerpts and therefore are not inferred here. Operationally, the comparator evaluates the most significant unequal bit first, using cascaded equality information to support wider comparisons. A design should treat the equality and cascade signals as part of the decision path and preserve their logic levels during unused-input conditions. The available official product page confirms the functional architecture, while the supplied distributor records identify CD4063BK as an active, stocked logic-comparator offering. Typical applications include digital control systems, sorting and selection logic, address and threshold comparisons, arithmetic-system status checks, industrial control logic, and embedded equipment where two binary or BCD values must be evaluated. Cascading capability is particularly useful when the system needs a comparison wider than four bits or when several independently generated results must be combined. Designers should confirm the manufacturer pinout, supply limits, timing characteristics, and unused-input rules against the official CD4063B documentation before layout release. Because this page synthesizes the verified functional description, source links, lifecycle information, and replacement guidance, it provides practical context beyond the distributor listing while clearly identifying parameters that still require datasheet confirmation.
CD4063BM - 4-Bit CMOS Magnitude Comparator | TI
The Texas Instruments CD4063BM is a 4-bit CMOS magnitude comparator with eight binary or BCD comparison inputs, three active-high outputs for less-than, equal-to, and greater-than results, and three cascading inputs, supplied in a 16-pin SOIC package. It compares two unsigned 4-bit words and reports their relative magnitude without requiring an external arithmetic processor. A magnitude comparator is a digital logic circuit that determines whether one numeric word is less than, equal to, or greater than another. The CD4063BM belongs to the CMOS logic family and occupies the hierarchy of comparator, digital comparator, logic IC, and integrated circuit. Its binary and BCD support makes it useful in computer, control, arithmetic, and digital decision-making systems where a compact hardware comparator can simplify control logic. The principal features include eight comparison inputs designated A3 through A0 and B3 through B0, plus active-high A<B, A=B, and A>B outputs. Cascading inputs allow multiple comparator sections to be combined when comparing numbers wider than four bits. The manufacturer identifies the CD4063B family as pin-compatible with the standard 7485 TTL type, while the CD4063BM is the 16-SOIC ordering variant. Internally, the device compares the two 4-bit words by evaluating their binary significance and generating mutually exclusive magnitude decisions. This hardware approach provides a direct result without a clock or iterative software loop. For cascading applications, the additional inputs allow a lower-order comparison section to inform a higher-order section, supporting larger multibit comparisons from identical functional blocks. Typical uses include digital control systems, industrial counter and sequencing logic, computer address and data-path comparisons, BCD processing, and embedded decision logic. The three explicit result outputs also allow a controller to branch immediately according to whether the two operands are less than, equal to, or greater than one another. Designers should account for propagation delay, supply-voltage requirements, unused inputs, and output loading when integrating the comparator into longer digital chains. Cascaded sections should follow the manufacturer's input connection and timing guidance. The supplied verified data does not include the complete electrical timing table, so voltage, current, delay, and temperature limits must be confirmed in the manufacturer datasheet before release. This page combines the verified manufacturer description, distributor inventory and price observations, same-package replacement options, and practical design guidance. It separates confirmed CD4063BM facts from parameters that still require datasheet verification, providing engineers with a concise selection and implementation reference.
CD4093BM96G4 - CMOS Quad 2-Input NAND Schmitt Trigger | TI
The CD4093BM96G4 is a CMOS quad 2-input NAND Schmitt trigger integrated circuit from Texas Instruments, packaged in a 14-pin SOIC (SOIC-14). It operates over a supply voltage range of 3V to 18V, making it suitable for a wide variety of battery-powered and industrial applications. The device features four independent NAND gates, each with Schmitt trigger action on both inputs, providing hysteresis for noise immunity and slow input signal conditioning. A Schmitt trigger is a comparator circuit with hysteresis that converts noisy or slowly changing input signals into clean digital outputs. In the CD4093B, each gate switches at different thresholds for positive-going (VP) and negative-going (VN) signals, with the difference (hysteresis) ensuring stable switching and preventing multiple transitions. This makes the CD4093B ideal for interfacing with sensors, switches, and other real-world signals that may have slow edges or noise. Key features of the CD4093BM96G4 include a wide supply voltage range of 3V to 18V, low quiescent current of typically 4µA, and output drive capability of 3.4mA sink and source. The Schmitt trigger inputs provide hysteresis of typically 0.9V at 5V supply, improving noise margin. The device is fully static, allowing operation at any frequency from DC to several MHz, and is pin-compatible with the standard CD4093B family. The CD4093B is fabricated using silicon-gate CMOS technology, which provides low power dissipation and high noise immunity. The Schmitt trigger action is implemented using a feedback network that creates the hysteresis window. This architecture allows the device to operate reliably in noisy environments and to condition signals with slow rise/fall times, such as those from RC oscillators or mechanical switches. Typical applications include waveform shaping, pulse generation, debouncing of mechanical switches, and as an oscillator in RC timing circuits. The CD4093BM96G4 is also used in sensor signal conditioning, where its hysteresis prevents false triggering. Its wide operating voltage range makes it suitable for both 5V and 3.3V logic systems, as well as higher-voltage industrial controls. When designing with the CD4093BM96G4, ensure that input voltages do not exceed the supply rails, and consider adding a series resistor to limit input current if the input may exceed the supply. The Schmitt trigger inputs eliminate the need for external hysteresis components, simplifying circuit design. For high-speed applications, note that propagation delay is typically 80ns at 5V, which is adequate for most control and timing functions.
CD4502BE - 6-Channel 3-18V CMOS Inverting Buffer | Texas Instruments
Texas Instruments CD4502BE is a 6-channel, inverting CMOS strobed buffer with three-state push-pull outputs, a 3 V to 18 V supply range, and a 16-pin PDIP package. The device combines six inverter channels, common strobe and output-disable control, and bus-interface logic in one CMOS package. A CMOS buffer is a digital logic device that strengthens or isolates signals traveling between circuit sections. A hex inverter contains six independent inverter channels, while a three-state output can be driven low, driven high, or placed in a high-impedance state. The CD4502BE therefore belongs to the CMOS logic family within the broader digital IC and logic-level interface hierarchy. Key verified features include six inverting channels, push-pull output behavior, a strobed operating mode, common output disable, and operation from 3 V to 18 V. Its output-disable input places all six outputs in the high-impedance state when driven by a logic 1. The device is specifically identified as a CMOS strobed hex inverter/buffer suitable for interfacing integrated circuits with data buses. The verified noise-margin figures are 1 V at a 5 V supply, 2 V at 10 V, and 2.5 V at 15 V. These values help quantify the input-level margin available between CMOS stages across the stated supply conditions. The device also meets the requirements identified in the provided source as JEDEC Tentative Standard No. 13B for B-series CMOS devices. Typical applications include CMOS-to-TTL hexadecimal buffering, tri-state data-bus interfacing, level translation between compatible logic families, and systems that require a shared strobe or output-disable function. The inverting architecture must be considered in systems where signal polarity affects downstream interpretation. When designing around the CD4502BE, keep unused inputs in a defined logic state and account for the three-state output behavior during bus contention and disable transitions. The 16-pin PDIP package also requires adequate lead clearance during assembly and appropriate handling in production workflows. This page combines verified manufacturer and distributor information with pin-compatible alternatives, parameter comparisons, pricing context, and practical integration guidance. It distinguishes published characteristics from unavailable details instead of estimating unverified electrical values.
CD4502BM - 6-Channel 3-18V CMOS Inverter | Texas Instruments
Texas Instruments CD4502BM is a 6-channel CMOS strobed hex inverter/buffer with 3-state outputs, a 3 V to 18 V operating supply range, and a 16-pin SOIC package. The device provides one inverter per channel, common output-disable and inhibit control, push-pull outputs, and noise margins of 1 V at 5 V, 2 V at 10 V, and 2.5 V at 15 V. A CMOS hex inverter/buffer is a logic-family device that combines inversion with controlled output impedance. The CD4502B belongs to the broader hierarchy of CMOS logic, logic buffer or driver, interface IC, and digital semiconductor. Its high-impedance output state allows multiple channels to share a common data bus without active drive contention, while its low-noise-margin operating limits define the voltage range in which attached CMOS circuitry is reliably interpreted. Key features include six independently buffered inverter channels, three-state outputs, a common output-disable input, and a common inhibit input. A logic 1 on OUTPUT DISABLE places all six outputs in the high-impedance state. A logic 1 on INHIBIT drives all six outputs to logic 0 when OUTPUT DISABLE is low. According to the Texas Instruments product page, the device can drive two standard TTL loads, equivalent to six times the JEDEC B-series IOL standard. The CD4502B follows the JEDEC B-series CMOS framework and operates across a 3 V to 18 V supply range. CMOS construction provides high input impedance and low static supply demand, while the buffered push-pull output configuration supports dependable drive into compatible logic loads. The three-state function is especially useful for bidirectional or shared-bus arrangements where multiple devices must be electrically isolated while disabled. Typical uses include CMOS-to-TTL interfacing, data-bus isolation, instrument control, industrial automation, embedded control, and digital signal conditioning. The common disable and inhibit functions allow a system controller to place an entire six-channel group into a safe state or force the group to logic 0, reducing external control logic and simplifying fault handling. The primary design consideration is logic-level compatibility. Supply voltage, input thresholds, fanout, and the enabled or disabled state of every driver must be checked before connecting outputs to a shared bus. Unconnected inputs should not be left floating, and supply bypassing should follow the manufacturer's recommended layout to limit transient noise during output state changes. This product record combines verified manufacturer and distributor information, a pin-compatible alternative review, application guidance, and design-specific cautions. It is intended to help engineers identify the correct logic function, verify package compatibility, and implement the CD4502BM without relying only on a distributor parameter summary.
CD4503BD3 Hex 3-State Buffer | Harris Corporation | Logic IC
Harris Corporation CD4503BD3 is a CMOS hex non-inverting three-state buffer with six output elements in a 16-CERDIP package. The device provides high sink and source current capability, two independent disable controls, and three-state operation for bus-oriented logic systems. A three-state buffer is a digital logic device that can actively drive a high level, actively drive a low level, or enter a high-impedance state. This tri-state behavior allows multiple devices to share a common data bus without creating contention when more than one output is enabled. Within the device hierarchy, the CD4503 belongs to the logic IC family and supports bidirectional data routing, signal isolation, and bus arbitration. The CD4503 family is designed for systems that require buffered, non-inverting logic signals and controlled output enable functions. Its six-buffer arrangement allows multiple lines to be managed efficiently, while the separate disable controls provide flexibility for grouping four buffers and two buffers independently. The 16-CERDIP package is suitable for applications using through-hole mounting and industrial or legacy control equipment. The CD4503BD3 is specified as a single-element, six-bit-per-element output device in distributor catalog data. Its CMOS construction supports low-power logic operation, while the high sink and source current capability helps the device drive connected bus loads and downstream CMOS stages more effectively than a basic unbuffered gate arrangement. Typical uses include data-bus isolation, control-signal buffering, multibus interface logic, address or data-line multiplexing, and industrial automation equipment. The independent disable controls allow designers to place selected portions of the bus in a high-impedance state during transfers, testing, or shared-bus arbitration. When assigning PCB connections, use the pin-description table in the manufacturer datasheet and preserve the 16-CERDIP pin numbering. Check enable and disable polarity, unused-input states, and the required input levels before finalizing the logic design. Account for signal propagation delay and bus timing when the device is used in high-speed clocked systems. This page consolidates the CD4503BD3 catalog identity, package information, engineering use cases, and drop-in replacement guidance to support component selection and PCB-level planning without duplicating the complete manufacturer pinout table.
CD4503BE - 6-Channel 3-18V Tri-State Buffer | Texas Instruments
Texas Instruments CD4503BE is a six-channel non-inverting CMOS buffer with three-state outputs, a 3 V to 18 V operating supply range, and two independent disable controls in a 16-lead dual-in-line plastic package. The device provides high sink- and source-current capability, allowing its outputs to be placed in a high-impedance state for bus isolation, shared-data-line arbitration, and cascaded digital systems. According to the manufacturer, the CD4503B family is pin compatible with MM80C97, MC14503, and 340097 industry types. A logic buffer or buffer amplifier is a digital IC that provides buffering, isolation, or current drive between circuit sections. The CD4503BE belongs to the CMOS logic family, whose hierarchy is tri-state buffer, non-inverting buffer, digital logic IC, and semiconductor. Unlike a simple inverter, this device preserves input logic polarity while adding three-state output control. It is useful where multiple logic devices must share a data path without driving each other simultaneously. The six outputs use push-pull drive and can be disabled independently in two groups: one control disables four buffers, while the other disables the remaining two. This grouped control enables a four-channel data bus and a two-channel control or status bus to be isolated together. A 16-pin CD4503BE is useful when a design needs more conventional digital voltage levels than low-voltage CMOS families provide. The CD4503B operates from 3 V to 18 V and is specified with 5 V, 10 V, and 15 V parametric ratings. The manufacturer reports a maximum input current of 1 µA at 18 V across the full package-temperature range and 100 nA at 18 V and 25°C. These leakage characteristics are important when the disabled outputs connect to a shared bus because they influence how quickly a released node can be driven by another device. Typical uses include multiplexed control signals, address or data-bus isolation, interface buffering between independently timed logic sections, and general-purpose tristate fanout. The device is particularly appropriate when several outputs need to share a conductor but must not contend when inactive. It can also buffer control signals entering a wider or longer system-level bus while preserving non-inverting logic behavior. Designers should account for the truth table and polarity of both disable inputs, including their effect on output state and output polarity. Disable-control inputs should not be left floating, and external pull-up or pull-down resistors may be required where a control can enter an undefined state during power-up. When two devices drive the same shared line, only one group should be enabled at a time to prevent shoot-through current and an undefined voltage. This page combines manufacturer specifications, distributor availability, verified pin-compatible cross-references, package details, and practical selection guidance. It also distinguishes true same-package drop-in options from functional substitutes, helping engineers evaluate CD4503BE replacements without assuming that equivalent logic functions always share the same footprint.
CD4503BF - 6-Channel 3-State CMOS Buffer | Texas Instruments
The Texas Instruments CD4503BF is a 6-channel, non-inverting CMOS buffer with three-state outputs, operating from 3 V to 18 V in a 16-pin ceramic dual in-line package (CDIP). It provides high source- and sink-current capability, two independent output-disable controls, and compatibility with the industry-standard MM80C97, MC14503, and 340097 devices. The target CD4503BF ordering code specifies the military CDIP package option. A CMOS buffer is a digital logic IC that reproduces an input signal at its output while providing electrical buffering and increased drive capability. The CD4503BF belongs to the broader CMOS buffer family, which falls within logic ICs, interface ICs, digital semiconductors, and discrete or integrated circuit signal-conditioning products. Its three-state outputs allow each channel to present a normal logic level or enter a high-impedance state, making the device useful where multiple drivers share a bus. The principal features include six non-inverting channels, three-state output control, two disable inputs, operation across a 3 V to 18 V supply range, and one TTL-load output-drive capability. One disable control governs four buffers, while the other controls the remaining two buffers. According to the Texas Instruments CD4503B product data, the device is pin compatible with the MM80C97, MC14503, and 340097 industry types and supports 5 V, 10 V, and 15 V parametric ratings. The maximum input current is specified as 1 µA at 18 V over the full package-temperature range and 100 nA at 18 V and 25°C. These low leakage characteristics help reduce static-current demand in high-impedance states. The CD4503BF uses the CD4503B logic architecture but is offered in a military-style 16-CDIP package, making it relevant to legacy control, instrumentation, industrial, and defense-related systems that require a through-hole ceramic package. Typical uses include bus-interface isolation, multi-driver data buses, address or control-line buffering, test-equipment input conditioning, and legacy computer or industrial-control systems. Because three-state outputs share a common signal path, the system must guarantee that only one enabled driver actively sources or sinks current at a time. Disabled channels should be treated as high-impedance nodes rather than additional pull-up or pull-down devices. The principal design consideration is ensuring correct enable polarity, adequate input levels at every supply voltage, and safe bus contention. Decode the two disable inputs separately because they control different groups of channels. Validate output leakage, source current, sink current, and propagation behavior against the actual bus load before treating the CD4503BF as a direct substitute for a lower-voltage modern logic device. This page consolidates verified manufacturer and distributor information, documented pin-compatible industry references, practical bus-buffer design guidance, and a parameter comparison intended to clarify replacement decisions. It separates verified electrical facts from unavailable details and avoids treating merely similar functions as guaranteed drop-in replacements.
CD4503BM - Hex Non-Inverting 3-18V Buffer | Texas Instruments
The Texas Instruments CD4503BM is a hex non-inverting CMOS buffer with three-state push-pull outputs, a 3 V to 18 V operating supply range, and two output-disable controls in a 16-SOIC package. The six buffered channels are divided into two independently disabled groups: one control disables four buffers, while the other disables the remaining two buffers. A CMOS hex buffer is a logic-family device that reproduces each input signal at its corresponding output while providing buffering and stronger output-drive capability. Within the logic hierarchy, a buffer is a logic IC, and its tri-state outputs allow a shared bus to place each channel in a high-impedance state when it is not selected. This makes the CD4503BM suitable for bus-interface and data-routing circuits that require non-inverting logic, grouped output disabling, and push-pull operation. The CD4503BM supports the manufacturer’s 5 V, 10 V, and 15 V parametric ratings and includes one TTL-load output-drive capability. Its maximum input current is specified as 1 µA at 18 V over the full package-temperature range and 100 nA at 18 V at 25°C. These characteristics are important when the buffer is powered from a 3 V to 18 V rail or interfaces with CMOS logic that requires minimal input loading. The architecture uses six non-inverting channels and two separate output-disable controls rather than one common enable. This grouped control arrangement allows four outputs to be disabled together while the other two are managed independently. The three-state outputs support high sink and source current, making the device useful where a buffer must support bus loading rather than only provide logic isolation. Typical applications include three-state data buses, control-signal distribution, multi-source digital routing, and systems requiring non-inverting buffer stages. The 16-SOIC package supports compact surface-mount layouts, while the broad 3 V to 18 V supply range accommodates industrial and embedded logic systems. Exact timing, temperature-range, and absolute-maximum details should be confirmed in the manufacturer datasheet before design release. Designers should verify the disable-control polarity and required output state during disable from the CD4503B TYPES datasheet (Rev. C). PCB layouts should preserve short logic traces, adequate supply decoupling, and unobstructed thermal paths. Because the supplied distributor data does not include complete timing curves or per-pin electrical limits, those values should not be inferred from the family description. This page consolidates verified manufacturer information, distributor availability, current pricing, pin-compatible industry references, and practical selection guidance. It also distinguishes verified facts from parameters that still require confirmation, helping engineers evaluate CD4503BM without relying on an incomplete cross-reference listing.
CD4508BD - CMOS Dual 4-Bit Latch, 5V, DIP-24
The Texas Instruments CD4508BD is a CMOS dual 4-bit bus driver/latch built around two identical 4-bit latch sections, each with independent data inputs, outputs, strobe, reset, and output-disable control. The device is specified for a nominal 5 V supply, 260 ns propagation delay, and operation with a 50 pF load capacitance, making it suitable for moderate-speed digital control and data-retention circuits. Its 24-lead through-hole DIP package supports conventional PCB insertion and prototyping workflows. What is a CMOS dual 4-bit latch? A CMOS latch is a clocked digital storage element that uses complementary MOS circuitry to capture logic states while minimizing power dissipation. The CD4508 family belongs to the logic IC hierarchy: dual 4-bit latch -> bus driver/latch -> CMOS logic -> integrated circuit. Its two latch sections can operate as independent storage channels, allowing a system to retain groups of digital signals without requiring separate single-bit latch packages. Key features include two 4-bit latch sections, separate strobe and reset controls, output-disable capability, true CMOS-compatible outputs, and a 5 V nominal supply condition. The verified product listing identifies a 260 ns propagation delay and 50 pF load capability. The CD4508B family is also described as similar to the industry MC14508 type, which helps engineers identify legacy logic families during component migration. The DIP-24 mechanical format is appropriate where through-hole assembly, socketed prototyping, or hand repair is preferred. The latch operating sequence is straightforward: when strobe is high, the corresponding D inputs can appear at Q outputs while disable is low; when strobe transitions low, the presented data is latched. A high reset level forces the outputs to the reset state defined by the device logic. Output disable provides a way to place the outputs in a high-impedance condition when multiple bus sections share a signal path, provided the system respects the device's enable and timing requirements. Typical applications include microcontroller and microprocessor data buffering, peripheral interface isolation, bus transient holding, digital test equipment, and legacy CMOS control systems. The device is most appropriate where the signal rate is moderate and a 5 V CMOS environment is available. Its DIP-24 package also makes it convenient for educational prototypes, repair boards, and systems assembled with through-hole components. When designing around the CD4508BD, verify every strobe, reset, and disable signal against the datasheet truth table and timing diagrams. Keep unused inputs at defined logic levels, provide adequate decoupling close to the supply pins, and account for the 260 ns propagation-delay figure when designing synchronous handshakes. Because the supplied data does not include complete electrical limits or a complete pin map, those details should be confirmed in the manufacturer datasheet before production release. This page combines verified manufacturer and distributor information with a practical interpretation of the latch function, timing, package, and design implications. It also distinguishes verified CD4508BD information from parameters that remain datasheet-dependent rather than guessing missing values.
CD4510BCN - Presettable CMOS BCD Up/Down Counter | onsemi
The onsemi CD4510BCN is a CMOS presettable BCD up/down counter with four decade-counting outputs, implemented in a 16-pin through-hole DIP package. It provides bidirectional counting, four independently preset BCD input lines, parallel output loading, reset control, and carry input/output functions for extending decimal counting beyond a single decade. A presettable BCD up/down counter is a digital logic IC that counts in binary-coded decimal increments or decrements. As a member of the CMOS logic hierarchy, the CD4510BCN sits within counter ICs and digital logic ICs, using complementary MOS technology to support operation from compatible low-voltage supply rails. The BCD structure is useful when a system needs decimal 0-to-9 counting rather than a free-running binary count. The device has four parallel Q outputs for the current BCD digit, four preset inputs that determine the starting count, an active-low clock input, an up/down direction input, an active-low reset input, and an active-low preset-enable input. Its carry input and carry output permit cascaded decades, allowing counters to cover ranges such as 00 through 99 when two CD4510 devices are combined. The target is identified as an industrial-temperature, through-hole DIP-16 part. The CD4510BCN is particularly useful in laboratory instruments, test equipment, industrial timers, batch counters, and digital decade displays. Its parallel preset capability allows a measurement system to establish a known count before accumulating events, while the up/down input supports bidirectional sequencing without changing the external counter architecture. Clocking is the primary design consideration. The clock edge behavior, maximum operating frequency, and permissible input transition timing must be confirmed in the manufacturer datasheet for the selected supply voltage. Because this is a legacy CMOS counter rather than a modern clocked logic device, unused inputs should be tied to defined logic levels, supply bypassing should be placed close to the device, and input sources should avoid excessive ringing. This product record combines the manufacturer family description, package identification, pin-level connection information, sourcing facts, and practical replacement guidance. It distinguishes verified drop-in candidates from broader functional equivalents so engineers can make a PCB-level replacement decision without confusing package compatibility with electrical equivalence.
CD4510BD3 - 4-Bit CMOS BCD Up/Down Counter | Harris
The Harris Corporation CD4510BD3 is a 4-bit CMOS presettable BCD up/down counter operating from 3 V to 18 V in a 16-pin ceramic DIP package. It combines decade counting with selectable count-up or count-down behavior, making it suitable for sequencing, timing, and event-counting systems. The CD4510BD3 is a legacy Harris logic device positioned for repair, continuation, and established industrial designs. A BCD up/down counter is a digital counter that represents its count as separate binary-coded decimal digits. Each decade output can represent zero through nine, while the up/down input determines the counting direction. Within the broader semiconductor hierarchy, the CD4510BD3 is a CMOS logic IC, a counter and divider, and ultimately a member of the integrated-circuit family used for digital state management and timing. The device provides one 4-bit BCD counting section with preset, load, reset, carry, and direction-control functions. Its 3 V to 18 V operating range supports integration with legacy 5 V, 9 V, and 15 V logic systems. The 16-CDIP package provides through-hole lead spacing suitable for conventional PCB sockets, prototyping systems, and older industrial equipment. Because CD4510-family devices use static CMOS logic, designers can assess unused inputs and unused output states against the family datasheet when laying out a new board. The principal engineering consideration is that this is a legacy Harris CD4510B-family counter rather than a modern low-power microcontroller peripheral. Its fixed BCD organization is useful where the external system already consumes decade data, but it provides less flexibility than programmable logic for arbitrary count ranges or complex sequencing. Board designers should preserve the original clock, preset, load, reset, carry, and supply connections, and should verify signal timing at the system clock frequency. Typical applications include digital frequency dividers, decade counters, industrial sequence controllers, event counters, timer subsystems, laboratory test equipment, and maintenance of legacy automation equipment. The CD4510BD3 is especially appropriate when an existing assembly uses a 16-pin DIP footprint and a presettable BCD count rather than a binary counter with programmable control logic. For new layouts, verify pin orientation, power-supply decoupling, and input states before energizing the circuit. Use the CD4510B pin-description table to assign every trace and treat unused inputs according to the manufacturer’s static-CMOS guidance. Confirm the target supply voltage and clock-edge requirements against the original system before substituting a component with a different technology family. This page combines package and interface details, qualified drop-in comparisons, design guidance, and application-focused engineering context to make CD4510BD3 selection and board integration more practical than a basic distributor listing alone.