Logic ICs
بەرهەمەکان (720+)
CD4510BE - 4-Bit CMOS BCD Up/Down Counter | TI
The Texas Instruments CD4510BE is a 4-bit CMOS presettable BCD up/down counter with a 16-pin PDIP package, operation from 3 V to 18 V, and a typical clock frequency of 8 MHz at 10 V. It combines synchronous counting, parallel preset and reset control, decoded decade outputs, and complementary carry outputs in a single counter IC. A BCD counter is a digital counter that represents each decimal digit with four binary bits. The CD4510BE counts upward through 0 to 9 or downward through 9 to 0, making it useful when a system must operate in a decimal format rather than a free-running 4-bit binary sequence. Within the broader hierarchy, it is a counter and divider within CMOS logic ICs, supporting sequencing, timing, and control functions. The device provides medium-speed operation with a typical clock frequency of 8 MHz at a 10 V supply. Its supply-voltage tolerance allows operation across 3 V to 18 V, while the CD4000-series CMOS architecture provides low static power use relative to many older bipolar counter families. Preset and reset inputs allow a designer to load an initial BCD value or clear the counter independently of its clock-driven count sequence. Internally, the counter uses four synchronously clocked D-type flip-flops with gating arranged to provide T-type flip-flop operation. Four decoded Q outputs and four complementary Q outputs expose the current decade digit. The carry and complementary carry outputs indicate decimal overflow or underflow, allowing multiple CD4510BE devices to form cascaded decimal counting stages without decoding every intermediate value. Typical applications include decade counters, digital clocks and timers, industrial sequencing equipment, test and measurement systems, and control panels that need a decimal display count. The decoded outputs can drive display drivers or logic, while the carry output provides a natural boundary event for incrementing another counter stage. Designers should account for the asynchronous nature of the reset and preset controls, provide clean power and ground connections, and use suitable decoupling close to the device. Clock-edge requirements and signal transition timing must be checked against the operating voltage because permissible clock rates vary with supply voltage. This page combines the manufacturer specifications, package details, cross-reference alternatives, application guidance, and practical design considerations needed to evaluate the CD4510BE as a 16-pin CMOS BCD up/down counter.
CD4510BPW - 4-Bit CMOS BCD Counter | Texas Instruments
The Texas Instruments CD4510BPW is a 4-bit CMOS presettable binary-coded-decimal up/down counter operating from 3 V to 18 V in a 16-lead thin shrink small-outline package. It supports positive-edge counting, parallel loading, carry and borrow functions, and a decoded decade-counting output arrangement. The CD4510BPW is designed for digital counting, sequencing, frequency division, and control applications requiring reversible decade counting. A BCD counter is a digital logic IC that represents each decimal digit with four binary bits. A presettable up/down counter can be loaded with an initial value, then increment or decrement that value according to its direction control. The CD4510B family therefore combines parallel data loading, reversible counting, and decade-oriented outputs while retaining the familiar CD4000-series CMOS characteristics. Key features include four counting bits, a 3 V to 18 V operating supply range, positive-edge clock operation, and an operating temperature range of -55 °C to 125 °C. The device provides dedicated clock, clock enable, load, reset, direction, carry, borrow, and parallel data-control functions. Its 16-TSSOP package supports compact surface-mount layouts while exposing the complete control and bus interface. The CD4510B architecture is based on edge-triggered counting with separate load and reset controls. A low load input transfers the parallel preset value into the count register, while the reset input establishes the defined count state. The direction input determines whether each active clock edge increments or decrements the BCD value. Carry and borrow outputs support cascaded counting stages or indicate decade-boundary events in multi-digit systems. Typical applications include decade counters, programmable timers, frequency dividers, industrial sequence controllers, digital instrumentation, and compact embedded control systems. The counter can be paired with a microcontroller or display interface to measure accumulated events, while its carry or borrow output can trigger an adjacent stage in cascaded decimal counting. PCB implementation should prioritize short clock and control paths and place bypass capacitance close to the supply pins. Confirm input levels, unused inputs, reset behavior, and output states in the power-up sequence against the manufacturer datasheet. The TSSOP footprint requires adequate solder-paste volume and thermal-relief clearance between closely spaced leads. This product record combines the manufacturer product information with package details, verified distribution availability, pin mapping, application guidance, and drop-in comparison information. It is intended to accelerate component selection and board-level implementation while keeping the primary engineering decision points visible.
CD4511B - BCD-to-7-Segment Latch Decoder Driver | Texas Instruments
The CD4511B is a CMOS BCD-to-7-segment latch decoder driver from Texas Instruments, designed to convert binary-coded decimal (BCD) inputs into signals that drive common-cathode 7-segment LED displays. It combines the low quiescent power dissipation and high noise immunity of RCA CMOS technology with n-p-n bipolar output transistors capable of sourcing up to 25 mA per segment. This allows direct driving of LEDs without additional current buffers. The device is available in multiple 16-lead packages including PDIP (E suffix), SOIC (NSR suffix), and TSSOP (PW/PWR suffixes), making it suitable for through-hole and surface-mount designs. A BCD-to-7-segment decoder is a digital combinational circuit that translates a 4-bit BCD input (0000 to 1001) into the appropriate 7-segment display code (a-g). It is a fundamental building block in digital display systems, converting binary data into human-readable numeric output. The CD4511B belongs to the CD4000 series of CMOS logic ICs, which are known for wide supply voltage operation (3V to 18V), low power consumption, and high noise immunity. This decoder sits between a counter or microcontroller and the display, simplifying the interface and reducing the number of I/O pins required. Key features of the CD4511B include lamp test (LT), blanking (BL), and latch enable (LE) inputs. The lamp test input forces all segments on to verify display functionality. The blanking input can shut off the display or be used for intensity modulation via pulse-width modulation. The latch enable input stores the BCD code, allowing multiplexed displays where several digits share the same decoder. The device also features an internal pull-down on the BCD inputs, ensuring a defined logic level when inputs are floating. Technically, the CD4511B is fabricated on a single monolithic structure combining CMOS logic with bipolar output transistors, a process known as BiCMOS. This architecture provides the low power consumption of CMOS with the high current drive capability of bipolar transistors. The outputs are active-high and can source 25 mA, sufficient for driving standard LEDs with appropriate current-limiting resistors. The device operates over a supply voltage range of 3V to 18V, with a typical quiescent current of only 80 µA at 5V, making it suitable for battery-powered applications. Typical applications include digital clocks, frequency counters, digital voltmeters, and any system requiring numeric display. The CD4511B is often used with 7-segment LED displays in instrumentation, consumer electronics, and industrial control panels. Its ability to latch data makes it ideal for multiplexed display systems, reducing the number of decoder ICs needed. When designing with the CD4511B, ensure that the supply voltage is within the specified range and that current-limiting resistors are placed in series with each segment to prevent excessive current. The blanking input can be used for brightness control by applying a PWM signal. For multiplexed displays, the latch enable input should be pulsed after the BCD data is stable to avoid display flicker.
CD4516BCN - 4-Bit CMOS Binary Up/Down Counter | onsemi
The onsemi CD4516BCN is a 4-bit CMOS binary counter with one counting element, positive-edge clocking, and presettable up/down counting in a 16-pin through-hole DIP package. According to the manufacturer listing, the device is categorized as a counter IC and binary counter with a 4-bit counting width. Its core function is to increment or decrement a four-bit binary value on each active clock transition, while providing parallel preset and load controls for initialization from external logic. A CMOS presettable up/down counter belongs to the counter and divider hierarchy within digital logic ICs. It combines a four-bit state register with direction control, clock synchronization, parallel loading, and preset capability. This allows one counter section to replace several discrete binary-counter stages while also supporting repeatable event sequencing, programmable divide ratios, and state transitions driven by external control signals. The CD4516BCN provides a straightforward positive-edge counting architecture and through-hole DIP-16 construction. The BCN ordering identifies an onsemi catalog configuration associated with a 16-pin plastic through-hole package and industrial-grade temperature positioning. Because it uses through-hole construction, the device is particularly useful in laboratory instruments, industrial control prototypes, educational equipment, test fixtures, and legacy automation systems where socketed DIP components are easier to assemble, inspect, and replace. The counter's four-bit width allows each output state to represent one of 16 binary combinations. Its up/down input determines the direction of the next count, while load and preset inputs provide two distinct ways to establish an initial state. These controls are valuable when a counter must begin at a commanded value, hold during an asynchronous loading event, or coordinate counting with another sequential circuit. The positive-edge clock convention also helps ensure that connected logic changes state once per intended clock transition. Typical applications include divide-by-N event generation, digital timing chains, programmable sequence controllers, industrial counters, batch-processing interfaces, and educational digital-logic systems. The CD4516BCN can operate as the central state element in a multistage counter because its parallel controls make cascading and reloading practical. Designers should account for propagation delays, clock pulse width, reset behavior, and the timing relationship among load, preset, direction, and clock inputs. For new PCB layouts, verify every signal against the current manufacturer pin description before routing because the DIP-16 footprint alone does not define the counter functions. In through-hole implementations, reserve adequate clearance around the device for insertion and probe access. For systems operating near switching nodes, route clock and control traces away from high-current edges and provide a stable ground reference to prevent unintended transitions. This page combines the exact catalog identity, verified source links, available package information, application guidance, and a constrained drop-in replacement analysis for the CD4516BCN. The replacement analysis focuses only on same-footprint devices and distinguishes catalog, electrical, and sourcing questions without treating different packages as drop-in alternatives.
CD4516BD3 - 4-Bit CMOS Up/Down Counter | Harris
The Harris Corporation CD4516BD3 is a 4-bit CMOS presettable binary up/down counter with one counting element, synchronous operation, positive-edge triggering, and bidirectional counting in a 16-lead CDIP package. It accepts preset and carry inputs for flexible counter-state initialization and provides four binary output signals plus carry and terminal-count functions. The through-hole package is specified as 16-CDIP with a 0.300-inch body width and 7.62 mm lead pitch. A CMOS binary counter is a sequential logic device that advances a two-state numerical state on each active clock transition. The CD4516 belongs to the broader logic IC hierarchy: counter and divider logic supports binary arithmetic, programmable sequencing, timing, and state control. Its bidirectional architecture allows each count to move upward or downward, making it more versatile than a fixed-direction counter when application logic controls the count direction. The CD4516BD3 provides a 4-bit counting width, one counter element, synchronous timing, and positive-edge operation. These characteristics are useful for digital systems that need repeatable counting behavior, manually or externally preset starting values, and predictable carry transitions. Its CMOS implementation also places it in the same low-noise digital-logic family commonly used by counters, dividers, frequency measurement, industrial control, and legacy instrumentation equipment. The counter architecture supports parallel preset loading, asynchronous reset behavior identified for this device family, and separate up/down and carry controls. Synchronous counting means the state advances on the active clock edge rather than asynchronously during the clock transition. Positive-edge triggering provides a defined sampling boundary and can simplify synchronization with surrounding flip-flops, registers, and control logic when reset and preset inputs are managed correctly. Typical uses include programmable sequence generation, pulse and event counting, frequency division, industrial control modules, laboratory counters, and legacy digital systems. The device can also act as the counting element in a frequency-divider arrangement when a suitable carry-output decoding network is added. In each case, correct operation depends on defining reset, preset, clock, and count-direction timing before connecting external signals. For new PCB layouts, verify the pin arrangement against the Harris CD4516B datasheet because the CD4516BD3 package is a 16-pin through-hole ceramic DIP rather than a modern surface-mount package. Pay particular attention to the relationship among the clock, reset, preset, parallel load, carry, and count-direction signals. The maximum supply voltage, operating-temperature limits, and detailed electrical limits should be taken directly from the manufacturer documentation before the part is used in new safety-critical or high-reliability equipment. This product record combines the exact catalog identity, package information, logic characteristics, drop-in replacement analysis, comparison parameters, and practical implementation guidance needed to evaluate the CD4516BD3. The resulting information helps engineers distinguish genuine 16-CDIP alternatives from surface-mount or functionally similar devices that cannot be installed on the original footprint.
CD4516BE - 4-Bit CMOS Binary Up/Down Counter | Texas Instruments
The Texas Instruments CD4516BE is a 4-bit CMOS presettable binary up/down counter with medium-speed synchronous operation, rated for 8 MHz typical clock frequency at a 10 V supply and housed in a 16-pin PDIP package. It combines synchronous counting, an internal carry function, reset, and parallel preset capability in a single counter IC. A CMOS binary counter is a synchronous digital logic device that stores a four-bit count and increments or decrements that count on a clock edge. The CD4516BE belongs to the CD4000 CMOS logic family, which is commonly used for low-power control, timing, sequencing, and industrial interface designs where operation across a broad supply-voltage range is useful. The principal features include 4-bit binary counting, programmable up/down direction, synchronous internal carry propagation, and reset and preset controls. According to the Texas Instruments CD4516B data sheet, the device has a typical maximum clock frequency of 8 MHz at 10 V and is tested for quiescent current at 20 V. These characteristics make it suitable for event sequencing, frequency division, programmable timing, and compact digital state machines. The counter uses four synchronously clocked D-type flip-flops with gating that provides T-type flip-flop behavior. Synchronous operation means the counting state changes on the active clock edge rather than through ripple transitions, simplifying control logic and making output behavior easier to predict when several counters are cascaded. The carry output supports expansion beyond four bits when greater counting range is required. Typical uses include industrial counters, frequency-divider circuits, programmable timers, sequence generators, test equipment, and digital control systems. The broad supply range of 3 V to 18 V also permits operation from common low-voltage logic rails and higher-voltage industrial control supplies, subject to the logic-level requirements of connected devices. When laying out a design, treat every unused input as a defined logic state rather than leaving it floating. Place bypass capacitors close to the supply pins, route clock traces away from noisy analog or high-current paths, and observe the manufacturer’s voltage-level and absolute-maximum limits. A pull-down or pull-up may be appropriate for unused count-direction, load, reset, or preset inputs depending on the desired operating state. This page combines the manufacturer’s operating information, practical counter design guidance, pin-function context, and a focused comparison with documented interchange candidates. It helps engineers identify the CD4516BE for legacy CMOS logic designs while making package, voltage, timing, and sourcing constraints explicit before PCB or production decisions are finalized.
CD4516BF - 4-Bit Binary Up/Down Counter | Texas Instruments
Texas Instruments CD4516BF is a 4-bit CMOS presettable binary up/down counter with a 16-pin CDIP package. It contains four synchronously clocked D-type flip-flops arranged as a T-type counting stage, supports parallel preset loading, and operates across the military temperature range of -55°C to +125°C. Its operating voltage and detailed dynamic performance must be confirmed in the manufacturer datasheet before design release. A CMOS binary counter is a sequential digital-logic IC used to count clock edges in a defined up or down direction. The CD4516B family belongs to the broader CMOS counter and counter/dividers category, integrating flip-flops, count-direction control, preset logic, and carry output in one package. It is useful when a system needs adjustable four-bit sequencing, frequency division, event counting, or programmable timing intervals without implementing the state machine from individual gate-level logic. Key characteristics include synchronous counting, binary counting format, four parallel preset inputs, active control for preset loading, and a carry output. According to the manufacturer documentation, maximum input current is 1 µA at 18 V over the full package-temperature range and 100 nA at 18 V and 25°C. Documented noise margins are 1 V at VDD = 5 V, 2 V at VDD = 10 V, and 2.5 V at VDD = 15 V. The counter architecture uses synchronously clocked D-type flip-flops with gating that provides T-type flip-flop behavior. This structure supports count-up and count-down operation while allowing a parallel preset value to establish the starting state. Because the CD4516BF is packaged in a 16-pin CDIP rather than a surface-mount package, it is especially appropriate for through-hole industrial, control, instrumentation, and legacy-system assemblies where leaded construction and a wide temperature range are priorities. Typical uses include digital time-base generation, batch and event counting, programmable sequence control, pulse accumulation, divide-by-two and divide-by-four clock generation, and test-equipment control logic. When connecting the device, preserve the counter's documented control-signal timing relationships, provide suitable logic levels for VDD and VSS, and account for unused inputs according to the manufacturer datasheet. The main design tradeoff is package footprint rather than functionality: CDIP-16 is mechanically durable and easy to inspect or prototype with, but it occupies more board area than a 16-pin surface-mount package and is generally not preferred for compact new products. Verify logic thresholds, propagation delays, clock-edge requirements, and absolute maximum ratings before substituting it into a newer design. This page combines the manufacturer's functional description, package and temperature information, electrical excerpts, compatible-part findings, and practical implementation guidance. It also highlights where engineers should consult the CD4516B datasheet for exact timing, supply-voltage limits, pin definitions, and recommended operating conditions rather than relying on general assumptions about CMOS counters.
CD4516BPW - 4-Bit CMOS Up/Down Counter | Texas Instruments
Texas Instruments CD4516BPW is a 4-bit CMOS presettable binary up/down counter packaged in a 16-lead thin shrink small-outline package. The device operates as one counting element, uses positive-edge clock transitions, and provides separate logic for incrementing and decrementing a binary count. Its TSSOP-16 package supports compact surface-mount layouts in digital control, timing, sequencing, and industrial logic systems. A binary counter is a sequential digital circuit that stores a multi-bit count and advances that count when triggered by a clock edge. A presettable up/down counter combines this counting function with parallel load inputs, allowing an external controller to establish an initial value. The CD4516BPW belongs to the CMOS logic-counter hierarchy, alongside counters, dividers, timers, and other clock-and-timing integrated circuits. The principal features of the CD4516BPW are its 4-bit counting capacity, 16-pin surface-mount package, positive-edge triggering, and independent up and down counting functions. Preset capability makes the counter useful when a system must begin from a known value rather than zero. Positive-edge operation also allows designers to define exactly when the state changes, simplifying synchronization with external control logic. Internally, the device combines flip-flop stages with combinational control logic for clocking, up/down selection, and parallel preset loading. This architecture lets one physical counter support forward counting, reverse counting, and initialization from external logic. The resulting state can be decoded into control or sequencing signals without requiring a separate programmable microcontroller when a fixed digital sequence is sufficient. Typical applications include industrial sequence controllers, programmable timing references, digital waveform generation, batch-counting systems, test equipment, and embedded control logic. In a programmable timer, a count preset can define the timing interval. In a sequence controller, an up/down counter can index machine steps while an external decoder selects the corresponding action. The compact TSSOP-16 package also makes the device practical for boards with limited floor area. Designers should treat the clock, preset, carry, and control inputs as a coordinated synchronous interface. Follow the manufacturer datasheet for the complete truth table, input states, timing limits, and unused-pin treatment. Preserve the specified clock transition and establish a defined state before enabling the counter so that the first output transition is predictable. This page combines the manufacturer function description, package and counter details, sourcing information, drop-in candidate analysis, and practical implementation guidance. It is intended to help engineers identify the correct logic function, verify footprint compatibility, and plan a deterministic counter implementation.
CD4518BCN Dual BCD Up-Counter | Texas Instruments
The Texas Instruments CD4518BCN is a CMOS dual BCD up-counter containing two identical, internally synchronous four-stage counters in a 16-pin through-hole DIP package. Each counter can increment on either a positive-going or negative-going clock transition, and the clock and enable functions are interchangeable. The device therefore provides two decimal counting channels in one package, with each channel able to count from 0000 through 9999 and roll over to 0000. A BCD counter is a digital counter category that represents each decimal digit with four binary bits rather than counting directly in a binary sequence. The dual-counter structure places two independent decimal counting channels into one integrated circuit, making the CD4518BCN part of the CMOS logic family within the broader hierarchy of digital counter ICs, logic ICs, and semiconductors. Its decimal organization is particularly useful when driving displays, sequencing decade-based events, or generating multi-digit timing and counting functions. The principal features include two four-stage BCD up-counters, interchangeable positive-going or negative-going clock and enable inputs, and separate reset control for each counter. The two counters can operate independently or be cascaded when a larger decimal count range is required. Because the device uses four-stage counting channels, one counter provides four decimal digits. Cascading the two counters can extend the overall counting range when the carry output of one channel drives the other channel. Internally, each counter stage is based on D-type flip-flop behavior, which supports synchronous state changes and predictable carry propagation. The manufacturer describes the CD4518B family as a CMOS dual BCD up-counter, while the CD4518BCN ordering designation identifies the 16-pin DIP configuration associated with the CD4518B device. The through-hole package also supports conventional PCB assembly and prototype rework, although it occupies more board area than a surface-mount equivalent. Typical uses include decade counters, event counters, digital timing systems, pulse-counting equipment, display sequencing, industrial control logic, and laboratory instruments. In a two-digit display system, the two counter channels can count separate decimal positions or be coordinated through a suitable driver interface. In a timing application, the BCD output can represent elapsed tens and units directly, while reset inputs provide a controlled return to zero. The primary design consideration is ensuring that each clock, enable, reset, and output connection matches the intended counting edge and counter channel. Decoupling capacitors should be placed close to the supply pins, unused inputs should not be left floating, and all signals must remain within the device’s specified voltage and temperature limits. Because the part is a legacy through-hole CMOS logic device, engineers should confirm lifecycle status, availability, and exact manufacturer ordering information before committing a new design.
CD4518BF3 Dual BCD Up-Counter, 16-CDIP | Harris
The Harris Corporation CD4518BF3 is a dual CMOS BCD up-counter operating from 3 V to 18 V, with a typical clock frequency of 6 MHz at 10 V. The device is packaged in a 16-pin ceramic dual in-line package (CDIP) and provides positive- or negative-edge triggering, synchronous internal carry propagation, and independent decade and binary counting modes for each counter. Each half of the device includes separate clock, reset, and count inputs, while the two counters can operate independently or together as an 8-bit cascaded counter. A BCD counter is a digital counter that represents decimal digits using a four-bit binary-coded decimal output. The dual counter belongs to the broader CMOS logic hierarchy: counter IC, logic IC, digital integrated circuit, and semiconductor. The CD4518 is useful when a design must count decimal events, divide an input frequency, sequence industrial equipment, or generate multi-digit numerical displays without requiring a microcontroller. Key operating features include medium-speed operation, a typical 6 MHz clock at a 10 V supply, selectable positive- or negative-edge triggering, and synchronous internal carry propagation. The dual architecture supports two independent 4-bit counters in decimal mode or two 4-bit binary counters. Its broad supply range allows operation from 3 V through 18 V, making it suitable for both 5 V and higher-voltage industrial logic systems when signal and input tolerances are checked carefully. The CD4518BF3 uses CMOS construction to provide low quiescent current and wide operating-voltage capability. Its maximum input current is specified as 1 uA at 18 V, and the device is 100% tested for quiescent current at 20 V over the full package-temperature range. As a legacy ceramic-DIP device, it offers a robust through-hole construction for industrial, laboratory, educational, and maintenance applications rather than a compact surface-mount footprint. Typical uses include decade counters for panel meters, frequency dividers in timing circuits, programmable sequence controllers, digital time-base modules, and two-digit event counters. Two CD4518 packages can also form an eight-bit cascaded counter when the carry output of the first device clocks the second. Designers should treat all unused CMOS inputs as active logic states and observe the manufacturer's truth table for reset and count-trigger behavior. For reliable operation, connect the reset inputs to a defined logic level and do not allow unused inputs to float. Decoupling should follow the manufacturer datasheet's recommended supply arrangement, while external clock and reset traces should be kept short and protected from switching-node coupling. The ceramic DIP package permits straightforward breadboard and through-hole construction, but its 0.300-inch, 7.62 mm pin pitch requires a compatible footprint and adequate board spacing. This product page combines the CD4518BF3 electrical characteristics, pin configuration, verified family references, compatible counter alternatives, comparison parameters, and practical implementation guidance to support component selection, schematic review, PCB footprint confirmation, and legacy-system maintenance.
CD4518BFX - Dual BCD Up Counter, 3-18V | Texas Instruments
Texas Instruments CD4518BFX is a CMOS dual binary-coded-decimal up-counter operating from 3 V to 18 V, with a typical clock frequency of 6 MHz at 10 V, in a hermetic CDIP-16 package rated for -55 °C to +125 °C. It combines two independent four-bit counting sections, selectable positive- or negative-edge triggering, synchronous internal carry propagation, and a common reset function within one low-power logic IC. A CMOS BCD counter is a synchronous digital logic device that advances a four-bit count in decimal steps from 0 through 9. The CD4518B belongs to the CD4000B family, combining CMOS logic, counter, divider, and power-management IC characteristics. Its decade-counting structure is useful when a system needs a numerical display, event count, timing interval, or frequency division with one decimal digit per counter section. The CD4518BFX provides two interchangeable clock inputs and two clock-enable inputs, allowing each counter to use positive-edge or negative-edge triggering as required by its surrounding logic. According to the Texas Instruments CD4518B product page and datasheet, medium-speed operation reaches 6 MHz typically at a 10 V supply. Synchronous carry propagation helps multiple decimal positions change consistently, while the maximum input current of 1 µA at 18 V supports low-power operation. Internally, the device uses CMOS counter stages to implement two independent BCD counting channels. The operating range of 3 V to 18 V covers legacy 5 V, 10 V, and 15 V logic systems. Its broad -55 °C to +125 °C temperature range supports industrial and instrumentation environments where operating conditions exceed typical commercial logic limits. The CDIP-16 package is intended for through-hole assembly and provides a robust mechanical form for legacy industrial boards. Typical applications include decade counters for panel meters and digital displays, event-counting modules for industrial equipment, programmable timing dividers, laboratory frequency counters, and sequencing logic for test systems. Two counting sections can be used independently, cascaded for additional decimal digits, or coordinated to count different external events within one package. When designing around the CD4518BFX, use the manufacturer pin-description table when assigning PCB tracks and preserve the specified supply decoupling arrangement. The CDIP-16 footprint is electrically compatible with standard 16-pin dual-in-line implementations, but ceramic and plastic temperature grades should be checked before using the part in a new design. This page combines the Texas Instruments CD4518B technical description with package, pinout, comparison, sourcing, and design guidance. It also highlights verified drop-in options for boards that require the CDIP-16 footprint while clarifying the functional and temperature-grade trade-offs among them.
CD4518BM - Dual 4-Bit BCD Up-Counter | Texas Instruments
The Texas Instruments CD4518BM is a CMOS dual 4-bit BCD up-counter IC with two independently clocked counter sections in a 16-lead SOIC package. It provides positive-edge and negative-edge clock inputs, asynchronous active-high master reset, and four buffered decade outputs for each counter. The device is designed for digital counting, frequency division, event sequencing, time-base generation, and industrial control logic where two independent counting channels can reduce the number of separate counter packages required. A BCD counter is a digital counter that represents each decimal digit with four binary bits, providing a natural interface for display and decimal sequencing systems. The CD4518BM belongs to the CMOS logic family and operates from a single supply, making it useful in legacy-compatible control systems, test equipment, timers, and embedded instrumentation. Each counter section is internally synchronous and can operate from either its positive or negative clock input, allowing different edge-sensitive counting arrangements within one circuit. The key electrical characteristics include a 16-lead SOIC package, operation from 3.3 V, 5 V, 9 V, 12 V, or 15 V typical supply configurations, and a specified operating temperature range from -55 °C to 125 °C. The counter outputs are buffered, while the clock and reset inputs provide the control functions needed for event counting and system initialization. The CD4518BM is not a binary counter; applications requiring binary counting rather than BCD counting should use the CD4520 family instead. Typical implementations include decade sequencing for multiplexed displays, pulse counting in control systems, timing dividers, batch and event counters, and logic in older industrial equipment. Because the device contains two counter sections, it is especially useful when one circuit needs to count two related events or generate two independent divided outputs. The manufacturer product page identifies the part as a CMOS dual BCD up-counter, while distributor listings identify the CD4518BM ordering code as a 16-pin SOIC device. When designing around the CD4518BM, verify the clock edge requirements and ensure unused counter sections are properly initialized. Supply bypassing should be placed close to the device, and signal traces should be kept short because the CMOS inputs are sensitive to leakage and noise. The pin assignment and electrical limits should be taken from the manufacturer datasheet before laying out the PCB. This page combines the manufacturer product information with distributor package data, replacement guidance, and practical design considerations for engineers evaluating the CD4518BM in a new or existing design.
CD4518BPW - Dual BCD Up-Counter | Texas Instruments
The Texas Instruments CD4518BPW is a CMOS dual BCD up-counter IC with two 4-bit counter elements, positive-edge or negative-edge counting capability, and a 16-pin TSSOP (PW) package. According to the manufacturer product information, the device is specified for a 3 V to 18 V supply range and an operating temperature range of -55 °C to 125 °C. It is designed for digital counting, frequency division, timing, sequencing, and control applications requiring decade counting with BCD outputs. An up-counter is a sequential logic device that increments its internal count when a clock edge is applied. The CD4518B combines two independently clocked counter sections with parallel BCD outputs, making it useful for implementing multi-digit decade counters, event counters, programmable timers, and digital sequencing functions. Its CMOS construction places it within the broader logic IC and counter IC hierarchy. Key features include two 4-bit counter elements, positive and negative edge triggering, parallel BCD outputs, and operation from 3 V to 18 V. The wide supply-voltage range allows the same counter to operate across low-voltage and conventional 5 V CMOS logic systems. The BCD organization is particularly useful when driving displays, transferring decimal counts to a controller, or building cascaded multidigit counters. The CD4518BPW uses the CD4518B counter architecture, with clock, reset, set, and count inputs for each counter section. Cascading multiple counter sections can extend the count range, while the separate counter elements can serve independent counting channels. Designers should account for propagation delays and account for the required reset or set conditions during initialization. Typical applications include digital frequency dividers, event counters, industrial control panels, digital clocks, instrumentation interfaces, and programmable sequence controllers. The 16-lead TSSOP package is suitable for compact surface-mount assemblies, while the -55 °C to 125 °C operating range supports industrial and extended-temperature environments. A key design consideration is the counter's clock edge configuration. The device supports positive and negative triggering, allowing it to follow the polarity conventions of the surrounding system. Designers should use the manufacturer pin-description table when assigning PCB tracks and should verify the reset and set inputs are inactive during normal counting operation. This product page combines the manufacturer product description, distributor package information, sourcing context, alternative-part assessment, and practical design guidance to help engineers evaluate the CD4518BPW for new and existing counter-based designs.
CD4520BCN - Dual 4-Bit Binary Up-Counter | onsemi
The onsemi CD4520BCN is a dual 4-bit binary up-counter with two independently clocked counting sections, an operating supply range of 3 V to 15 V, and a PDIP-16 through-hole package. Each counter uses positive-edge triggering and reaches a terminal count of 15 before rolling over to 0. A CMOS binary counter is a sequential logic device that tracks a binary number from one clock event to the next. It belongs to the logic IC hierarchy: counter → binary counter → digital counter → logic IC → semiconductor. The CD4520BCN contains two identical 4-stage counters, allowing one package to provide independent counting channels or to implement a wider 8-bit counting arrangement when the sections are cascaded. Key features include dual 4-bit up-counting, positive-edge triggering, a maximum count of 15 per section, and operation across a 3 V to 15 V supply range. Its internal counter stages are D-type flip-flops with interchangeable clock and enable lines, giving designers control over when counting advances and when the count is held. The device is offered in a 16-pin PDIP package for through-hole PCB assembly. The CD4520BCN is designed for low-power digital control, timing, sequencing, and state-counting systems. Because its counter sections are independently synchronous, each section advances on the selected active clock edge when its enable condition is satisfied. Cascading the sections extends the count range beyond the native 4-bit capacity, while separate clock inputs permit two unrelated counters to share one package. Typical uses include industrial timing modules, laboratory pulse counters, programmable-delay circuits, digital instrumentation, event-counting interfaces, and digital control systems. The device can also serve as a programmable binary divider when additional logic conditions the clock and enable inputs. Designers should account for unused counter inputs, provide suitable bypassing around the power pins, and confirm that clock and reset waveforms satisfy the manufacturer’s timing requirements. Because the counter operates in the legacy CMOS 4000-series family, verify input levels and timing margins against the system supply voltage before using it with modern 3.3 V or 5 V logic. This page combines the CD4520BCN’s key operating characteristics, package details, drop-in replacement analysis, application guidance, and practical design notes to support faster component selection and board-level implementation.
CD4520BD - 4-Bit Binary Up Counter | Harris Corporation
The Harris Corporation CD4520BD is a CMOS dual binary up-counter with two independent 4-bit counter elements, a maximum operating frequency of 8 MHz, and operation from 3 V to 18 V in a 16-pin SOIC package. The device provides separate clock and reset inputs for each counter, allowing two counting channels to operate independently within one package. A binary counter is a sequential digital-logic component that advances its output state whenever an active clock edge occurs. The CD4520BD belongs to the CMOS counter family, which is part of the broader logic IC hierarchy: counter → digital counter → sequential logic → logic IC → integrated circuit. Each 4-bit section can represent 16 binary states and may also be configured for divide-by-two operation according to the manufacturer documentation. Key verified characteristics include a 3 V to 18 V supply range, an 8 MHz maximum frequency, 80 ns timing, and positive-edge clock triggering. The bidirectional output capability allows the counter state to be observed from either the Q or complementary Q output. These features make the IC useful when a design requires repeatable binary sequencing, frequency division, timing generation, or event counting. The CD4520BD is implemented as a CMOS logic device, providing a practical combination of low power consumption and wide supply-voltage operation. Its operating range permits use in 5 V and higher-voltage logic systems where additional input or output voltage range is useful. The 16-pin SOIC package also supports conventional surface-mount assembly rather than requiring a through-hole footprint. Typical uses include divide-by-two clock conditioning, programmable digital timers, sequence generators, phase-delay counters, and general-purpose binary event-counting circuits. Two counter sections in one package can reduce board area when a design needs more than one independent counting channel and the required clock and reset arrangements match the device architecture. Designers should verify clock-edge behavior, reset polarity, output-drive requirements, and unused-input states against the manufacturer datasheet before layout. The 80 ns timing and 8 MHz frequency figures establish the device’s logic-speed context, but external signal fan-out, propagation delay, wiring, and supply level remain important when defining a complete operating point. This page consolidates the verified manufacturer and distributor information for CD4520BD, provides practical application guidance, records the available 3 V to 18 V and 8 MHz operating limits, and distinguishes verified drop-in evidence from substitute parts that could not be confirmed as pin-compatible.
CD4520BD3 - Dual 4-Bit Binary Counter, Military Grade | Harris | 16-CDIP
The Harris Corporation CD4520BD3 is a dual 4-bit synchronous binary up-counter built on CMOS 4000/14000/40000-series logic, packaged in a 16-lead ceramic DIP (CDIP-16, 0.300 inch / 7.62 mm pitch) rated for military temperature conditions. Two independent 4-bit counters operate from a single supply rail, each with its own clock input, binary outputs (Q0-Q3 and Q4-Q7) and a common master reset, making the device a natural building block for frequency division, event counting and modulo-N timing. An up-counter is a type of sequential logic device in which each rising clock edge increments a binary count register. In the broader taxonomy, CD4520BD3 sits in the CMOS counter family, which belongs to the larger logic IC category, a sub-group of integrated circuits and semiconductors. Two counters in one package let a designer build a 24-bit cascaded divider, a two-stage programmable timer, or a dual-channel event counter without adding a second package or second power rail. Key characteristics of the part include a 3 V to 18 V operating supply range, positive-edge-triggered synchronous counting, CMOS levels and logic swing compatible with the 4000 series family, and an operating temperature grade designated as military. The ceramic hermetic-style CDIP-16 mechanical format, 0.300 inch lead pitch and through-hole thermal design make it suited to chassis-mounted, ruggedised and long-life industrial, aerospace and defence equipment rather than high-density surface-mount consumer assemblies. Because the two counter sections share one package and one master reset, a single reset pulse clears both count chains, simplifying synchronisation in cascaded divider designs. The binary outputs are true flip-flop outputs that change only on the active clock edge, which keeps downstream decode logic glitch-free compared with ripple or asynchronous counter topologies. Typical application areas include frequency division and pulse-rate reduction in industrial control and instrumentation, programmable timers and delay generators in test and measurement equipment, event and piece counting in production machinery, LED display refresh and multiplexing subsystems, and clock or counter blocks in aerospace and defence avionics where the military temperature grade and ceramic package are valued. When designing with the CD4520BD3, remember that it is a through-hole 0.300 inch CDIP, so it will not fit a standard 0.1 inch DIP footprint and cannot be assembled on a surface-mount board without a socket or a deliberate adapter. Take the pin assignments from the manufacturer pin-description table before routing the board, and remember that cascaded counters require care so that the carry from one section is used as the clock of the next to avoid race conditions.
CD4520BE - Dual 4-Bit Binary Up-Counter | Texas Instruments
The Texas Instruments CD4520BE is a CMOS dual 4-bit binary up-counter containing two identical, internally synchronous 4-stage counters. Each counter can increment on a positive-going or negative-going clock transition, and its clock and enable lines are interchangeable. The device is packaged in a 16-lead PDIP and is specified for operation from -55°C to 125°C. A binary counter is a sequential digital-logic component that stores a multi-bit numerical value and advances that value by one on each active clock event. The CD4520 family belongs to the CMOS logic hierarchy, where dual counters provide parallel state-holding and event-counting functions without requiring several separate flip-flop packages. Its two counters can be cascaded or operated independently to divide frequency, extend count range, or create multi-stage timing sequences. The CD4520BE provides two 4-bit counting sections, so each section represents binary values from 0 through 15 before rollover. Interchangeable clock and enable inputs provide flexibility in determining which edge advances the internal D-type flip-flop stages. The carry outputs allow additional counter sections to be cascaded, while the four parallel outputs for each counter expose the current binary state for decoding, event counting, or sequential control. The implementation uses CMOS stages with internally synchronous counting behavior. Positive-going and negative-going edge operation supports different clocking conventions, while separate enable inputs allow each counter to be held or advanced under independent control. The 16-pin PDIP format provides a conventional through-hole footprint suitable for industrial control, timing, and legacy-compatible logic systems. The manufacturer product page lists the CD4520BE in the active lifecycle state. Typical uses include frequency division, programmable timing, event and pulse counting, sequential industrial controls, and digital clock or timer subsystems. The dual-counter organization is particularly useful when a design needs two independent count sequences, two cascaded divider stages, or parallel outputs from two counters that can be combined by downstream logic. Designers should verify the counter's clock-edge requirement, maximum operating frequency, supply-voltage range, and output-drive capability against the manufacturer datasheet before setting timing margins. Input signals must remain within the specified CMOS logic levels, unused inputs should not be left floating, and decoupling should follow the datasheet's recommended application circuit. Cascade connections should be checked for propagation-delay accumulation across multiple stages. This page combines manufacturer specifications, package and lifecycle information, application guidance, comparison parameters, and verified drop-in alternatives. It also highlights where timing, electrical limits, or functional differences must be checked before substituting another member of the CD4520 family.
CD4520BEX - Dual 4-Bit Binary Counter | Texas Instruments
Texas Instruments CD4520BEX is a CMOS dual binary up-counter with two 4-bit counting sections, a 3 V to 18 V operating range, and a 16-lead PDIP package. The counter increments on each positive clock edge and is suitable for digital counting, frequency division, sequencing, and industrial control logic. Its binary counting format distinguishes it from BCD counter variants. A binary counter is a sequential digital-logic component that stores a multi-bit count and advances that count on a triggering edge. The CD4520B belongs to the counter and divider hierarchy within CMOS logic ICs, combining two counting sections in one package. Binary counters are useful when a system needs modulo operation, event counting, timing division, state progression, or an encoded count for downstream logic. The principal features of the CD4520BEX include dual-counter operation, 4-bit binary counting, positive-edge triggering, and operation from 3 V to 18 V. Each counting section provides a practical division or modulo function when cascaded or configured in a system. The 16-lead PDIP package supports through-hole assembly, prototyping, repair, and legacy industrial equipment where a surface-mount package would be unsuitable. Internally, the CD4520B is identified as a CMOS synchronous, positive-edge-triggered binary counter. Positive-edge triggering means the count changes when the clock input transitions from a low level to a high level. Synchronous operation helps maintain controlled state changes at the active clock edge, which is important when the counter output feeds synchronous control or display circuitry. The CD4520B and CD4518B families are related but are not functionally identical because their count formats differ. Typical implementations include digital event counters, programmable timing dividers, industrial sequence controllers, pulse-counting interfaces, stepper-motor position counters, and general-purpose binary state machines. The counter is particularly useful when a compact 4-bit count must be divided by a power of two or expanded through cascaded stages. PCB design should provide a stable clock path, a defined reset path, and adequate bypassing near the power pins. Keep clock traces away from noisy switching nodes and use a pull-down resistor when the unused clock input could float. For new production designs, verify the complete logic-state, timing, and absolute-maximum-rating tables in the manufacturer datasheet before assigning inputs or selecting external components. This page combines the manufacturer product information with practical counter-selection guidance, verified same-package alternatives, pin and timing considerations, and application-specific design notes. It also identifies where timing limits, electrical characteristics, and detailed pin descriptions must be taken directly from the CD4520B datasheet before final circuit release.
CD4520BM - 4-Bit CMOS Dual Binary Up-Counter | Texas Instruments
The Texas Instruments CD4520BM is a CMOS dual binary up-counter with two identical, internally synchronous 4-stage counter sections in a 16-pin SOIC package. The device is intended for digital counting, frequency division, timing, and sequential control applications. Each counter uses D-type flip-flop stages, allowing incrementing on either the positive-going or negative-going clock transition when the corresponding clock and enable lines are arranged for the required operation. A binary counter is a digital logic component that tracks a binary count through successive clock events. The CD4520BM belongs to the CMOS logic family and provides two counter elements in one package, allowing one device to implement two related counting functions when the application requires them. Its binary counting structure is distinct from a BCD counter, so the output encoding should be checked against the intended system format before substitution. The primary design features visible in the manufacturer and distributor records are the dual-counter organization, four-stage binary count capacity, CMOS logic family, and 16-SOIC package. The manufacturer identifies CD4520B as a CMOS Dual Binary Up-Counter, while the distributor listing describes CD4520BM as a two-element, 4-bit, positive/negative counter in a 16-SOIC package. The M suffix indicates the leaded 16-pin SOIC ordering variant listed by Texas Instruments. The CD4520BM can be used as a frequency divider, event counter, programmable timing element, digital sequencer, or general-purpose logic building block. In frequency-divider applications, the counter state can be monitored and decoded to produce a lower-frequency signal derived from an incoming clock. In sequencing applications, the binary output can be decoded by external logic to create ordered control steps. For a new design, the clock, reset, enable, supply, and output behavior should be confirmed against the manufacturer datasheet and its operating limits. The exact operating voltage range, timing ratings, input and output levels, quiescent current, temperature range, and absolute maximum ratings are not established by the retrieved manufacturer and distributor records, so they must be checked against the official datasheet before qualification. The Request a Quote form on this page can be used for current commercial inquiry, including availability and lead time. This page combines the manufacturer product record, distributor identification, package information, practical application guidance, and a conservative replacement analysis. The alternatives are limited to parts that can be identified from the retrieved cross-reference information without assuming unverified electrical or pin-level equivalence.
CD4521BE - 24-Stage CMOS Frequency Divider | Texas Instruments
Texas Instruments CD4521BE is a CMOS 24-stage frequency divider with one 24-bit counter element, divide-by-2 operation, negative-edge triggering, and asynchronous reset in a 16-lead PDIP package. The device operates from 3 V to 18 V, supports counting rates up to 13 MHz, and is specified for temperatures from -55°C to +125°C. A frequency divider is a counter IC that converts an input waveform into a lower output frequency according to a defined division ratio. The CD4521BE belongs to the CD4000 CMOS logic family and combines a 24-stage ripple-counter section with oscillator-support circuitry. Its negative-edge counting behavior and asynchronous reset make it useful for digital timing, frequency reduction, and periodic-event generation systems. The principal operating characteristics are a 24-bit counting capacity, a single counter element, a maximum counting rate of 13 MHz, and a 3 V to 18 V supply range. The Divide-by-2 configuration supports binary frequency division, while the oscillator section can be configured with RC or crystal timing networks according to the manufacturer documentation. Asynchronous reset provides a direct method for returning the counter to a defined state. The CD4521B family is manufactured in multiple package options, but the CD4521BE ordering code identifies the 16-lead dual-in-line plastic package. A 16-pin PDIP offers a straightforward through-hole footprint and generous lead spacing for hand assembly, prototyping, repair, and educational or industrial control boards where surface-mount assembly is unnecessary. Typical uses include divide-by-two clock conditioning, waveform division in timing modules, programmable counters, digital clock circuits, industrial control logic, and oscillator-based frequency generation. In a divider circuit, the incoming clock is applied at the timing input and the resulting divided signal is taken from an appropriate counter output. Reset should be controlled so that it remains inactive during normal counting. The most important design consideration is to preserve the input signal's amplitude and transition timing relative to the supply voltage. Wiring should be kept short, unused inputs should be tied to a defined logic level, and decoupling should be placed close to the supply pins. Because the CD4521BE uses a through-hole package, lead length and assembly workmanship can materially affect clock reliability in high-frequency layouts. This product page organizes the confirmed ordering information, operating limits, package details, technical FAQ, application guidance, and design considerations into a practical engineering reference. It also separates confirmed manufacturer characteristics from parameters that require direct confirmation in the current datasheet, helping designers evaluate CD4521BE without relying on ambiguous or unsupported substitution data.
CD4521BM - CMOS 24-Stage Frequency Divider | Texas Instruments
The Texas Instruments CD4521BM is a CMOS 24-stage frequency divider with oscillator support, supplied in a 16-pin Small Outline Integrated Circuit package. It combines an oscillator section with 24 ripple-carry binary counter stages, allowing an external RC or crystal oscillator to drive a programmable binary count sequence. The available device information identifies a 24-bit division structure, a CD4000-series CMOS logic family, and an operating temperature range of -55°C to +125°C. A high signal on RESET forces the counter into its all-zero state and disables the oscillator, while counting advances on the negative transition of IN1. A CMOS frequency divider is a type of sequential logic IC that divides an input clock by a fixed binary factor. In the broader semiconductor hierarchy, it belongs to counters and dividers, then logic ICs, and ultimately the wider digital semiconductor category. The CD4521BM is useful when a system needs long division ratios, a generated clock, or a cascaded timing chain without implementing the counter in a microcontroller or discrete flip-flop array. Its oscillator and counter sections provide a dedicated hardware function for timing and sequencing. The key verified characteristics include a 24-stage ripple-carry counter, 16-pin SOIC packaging, a -55°C to +125°C temperature range, and a 3 V minimum operating voltage as shown in the available cross-reference information. The counter is advanced on the negative transition of IN1, while RESET returns the state to all zeros and disables the oscillator. These characteristics make the device suitable for long-period timers, modulo counters, clock dividers, and low-frequency signal generation. The manufacturer identifies the circuit as a CMOS 24-stage frequency divider in its CD4521B product documentation. Because the oscillator can be configured with either RC or crystal components, the circuit supports a range of timing approaches. An unused oscillator input must be tied either HIGH or LOW, preventing an undefined input state. RESET provides a deterministic starting condition, and the multiple counter outputs allow different division ratios or timing phases to be observed. This architecture is particularly useful when one input frequency must be converted into several related output frequencies without continuous software intervention. The CD4521BM is supplied by Texas Instruments in a 16-pin SOIC package. The manufacturer product page provides the CD4521B family data sheet, while distributor records identify the CD4521BM ordering variant, tube packaging, and availability information. Its broad temperature rating supports industrial and instrumentation use, although designers must still verify the complete electrical limits, timing characteristics, and output-drive requirements in the manufacturer data sheet before release. For oscillator-based designs, calculate the RC or crystal timing network from the manufacturer guidance and keep oscillator traces short and away from noisy switching nodes. For externally clocked designs, ensure that IN1 transitions satisfy the specified negative-edge counting requirement and that unused inputs are tied to defined logic levels. RESET can be used during power sequencing to hold the divider in a known state until the surrounding system is ready. This product data combines manufacturer-family information, distributor specifications, verified pricing references, cross-reference results, and practical implementation guidance. It also distinguishes genuine same-package substitutes from unspecified or cross-package alternatives so engineers can evaluate replacement decisions without relying on unsupported equivalence claims.
CD4521BMT - 24-Bit CMOS Frequency Divider | Texas Instruments
Texas Instruments CD4521BMT is a CMOS 24-stage frequency-divider and counter IC with one 24-bit divide-by-2 element, negative-edge triggering, and a 16-pin SOIC package. It operates across a stated temperature range of -55°C to +125°C and supports supply voltages down to 3 V. Its principal function is to divide an incoming clock signal by two while providing 24 stages of cascading division. A frequency divider is a sequential digital circuit that produces an output clock at a fraction of its input frequency. The CD4521 belongs to the CMOS CD4000 logic family and falls within the broader hierarchy of divider IC, digital counter, logic IC, and semiconductor. Dividing a frequency is useful when a subsystem requires a slower timing reference derived from a faster oscillator without requiring another clock source. The CD4521BMT's 24-stage, divide-by-2 architecture makes it appropriate for clock division, waveform timing, event counting, and low-frequency generation. Negative-edge triggering defines the active clock transition used by the counter. Its 16-SOIC package supports conventional surface-mount PCB assembly, while the broad stated operating-temperature range allows consideration in industrial and extended-temperature equipment. The device is identified by Texas Instruments as a CMOS 24-stage frequency divider. The CD4521B family operates from the CD4000 CMOS logic family, whose members are designed for low-power digital operation. Because the counter advances on a selected clock edge, the input source must provide a clean, repeatable waveform with timing that satisfies the family's applicable operating limits. Typical uses include dividing a system oscillator for slower housekeeping clocks, creating timing intervals in digital control equipment, counting recurring external events, and generating predictable square-wave timing references. The 24-bit count depth provides substantially more division stages than a basic binary ripple counter, making the device useful where a high-order division ratio is required. Layout should keep the clock input path short and return the device ground pins to a low-impedance ground plane. Supply and ground connections should be placed to minimize loop area, and unused inputs must be tied to a defined logic level. Designers should verify the counter's reset behavior, maximum operating frequency, and output-drive capability against the specific clock source and load before releasing a production design. This product page combines the Texas Instruments family description, package and temperature information, distributor listings, and pin-compatible cross-reference results with practical guidance for clock-divider design, replacement selection, and PCB implementation. It is intended to help engineers identify the exact CD4521BMT ordering variant and evaluate it for extended-timing and frequency-divider applications.
CD4522BE - Programmable BCD Divide-by-N Counter | Texas Instruments
Texas Instruments CD4522BE is a CMOS programmable BCD divide-by-N counter with one 4-bit counting element, operating from 3 V to 18 V in a 16-pin PDIP package. The counter supports positive or negative count inputs, provides symmetrical output characteristics, and is intended for frequency division, sequencing, and programmable counting systems. A programmable BCD counter is a digital logic device that counts in binary-coded decimal form and divides an incoming frequency by a selected count value. The CD4522B belongs to the CD4000 CMOS logic family, combining a decade-counter architecture with programmable count inputs. This places it within the hierarchy of counter IC, logic IC, digital CMOS IC, and semiconductor, making it suitable for both timing and control applications. Key characteristics include a 3 V to 18 V operating range, a 4-bit counting element, and operation up to 8 MHz according to the manufacturer datasheet family information. The device uses symmetrical output characteristics, and its specified maximum input current reaches 1 microampere at 18 V over the full package-temperature range. At 18 V and 25 degrees Celsius, the stated input current can be reduced to 100 nanoamperes. The CD4522B family is manufactured in multiple package and ordering configurations. The E suffix identifies the 16-lead dual-in-line plastic package used by CD4522BE. Its through-hole PDIP construction supports conventional PCB assembly and is distinct from the surface-mount options listed for the CD4522B family. The device meets the requirements stated for JEDEC Standard No. 13B for B-series CMOS devices. Typical uses include programmable frequency division in industrial control equipment, pulse counting in instrumentation, clock and timer sequencing, and divide-by-N logic in test systems. Its broad supply-voltage range allows operation from low-voltage 3 V systems through conventional 5 V and 15 V CMOS environments. The design should account for input transition timing, reset behavior, and the selected count configuration when defining system timing. For a new PCB, preserve the CD4522BE pin arrangement and verify every connection against the Texas Instruments CD4522B pin-description table. For an existing design, confirm the logic levels, maximum input frequency, operating voltage, and reset requirements before substituting any equivalent. The PDIP package also requires adequate spacing for through-hole insertion and mechanical clearance around the device.
CD4522BM - 4-Bit Programmable BCD Counter | Texas Instruments
The Texas Instruments CD4522BM is a CMOS programmable BCD divide-by-N counter with one 4-bit counting element, a 16-pin SOIC package, and operation across a 3 V to 18 V supply range. The device provides a decoded zero-state output for divide-by-N designs and supports cascade feedback for implementing higher divide ratios across multiple stages. According to the verified Texas Instruments product data, it operates from -55 °C to +125 °C and is intended for both positive and negative clock-edge counting functions. A BCD divide-by-N counter is a digital logic IC that counts in binary-coded decimal and generates a terminal-count indication after a selected number of input transitions. In the broader semiconductor hierarchy, this function belongs to counters and dividers, then to logic ICs, digital semiconductors, and programmable CMOS devices. The CD4522B family is useful where a system must divide a clock into programmable decade-based intervals without requiring a microprocessor or programmable logic device. The internally synchronous counter architecture supports high internal and external operating speeds, while the logic-edge-clocked design increments on a positive Clock transition or on a negative Clock Inhibit transition. A decoded zero-state output simplifies the end-of-count detection normally required by divide-by-N systems. The verified manufacturer material also states that the device is 100% tested for quiescent current at 20 V and receives parametric testing at 5 V, 10 V, and 15 V, providing useful production-control coverage across common CMOS operating points. The programmable divide count is configured through the counter's control inputs, while cascade feedback permits multiple counter sections to implement larger division ratios. This architecture reduces the external logic needed for timing dividers, periodic-event generators, sequence counters, and clock-staging circuits. Exact propagation-delay and maximum-frequency limits were not present in the supplied verified snippets and should therefore be confirmed in the manufacturer datasheet before relying on timing margins. Typical applications include decade counters, programmable frequency dividers, industrial timing modules, digital clock generation, pulse-rate counting, and multistage cascaded division systems. The CD4522BM is particularly appropriate when a fixed, reliable CMOS counter is preferred over software timing, especially where the final count must be electrically programmable rather than fixed in firmware. Designers should connect the decoded zero output and preset-enable functions according to the intended single-stage or cascade configuration, and should account for supply-voltage-dependent propagation delay in high-speed clock trees. Decoupling capacitors should be placed close to the power and ground pins, while unused inputs must be held at a defined logic level rather than left floating. This page consolidates verified manufacturer and distributor information, package details, sourcing links, strict drop-in candidates, and practical design guidance. It distinguishes documented characteristics from parameters that still require confirmation from the full CD4522B datasheet, helping engineers make a defensible sourcing and design decision.