Logic ICs
بەرهەمەکان (720+)
ATF22V10C-7PX - 10-Macrocell 7 ns SPLD | Microchip
The Microchip Technology ATF22V10C-7PX is a 22V10-compatible, electrically erasable programmable logic device with 10 macrocells, approximately 500 logic gates, a 5 V supply, and a 7 ns speed designation. It is packaged in a 24-pin PDIP. The device uses electrically erasable Flash memory, allowing its fuse map and logic configuration to be programmed or rewritten without a dedicated programmer that uses ultraviolet erasure. An SPLD, or simple programmable logic device, is a user-programmable semiconductor that combines AND-array logic, OR-array logic, and programmable I/O resources into one reconfigurable logic component. Within the broader semiconductor hierarchy, the ATF22V10C-7PX belongs to the PLD family, which sits between fixed gate arrays and larger FPGAs. Its JEDEC-compatible 22V10 architecture is useful when a compact, deterministic logic block is required without implementing a full FPGA configuration system. The ATF22V10C family provides 10 macrocells and approximately 500 gates in a 24-pin package. According to the Microchip ATF22V10C datasheet, electrically erasable Flash technology supports device reprogramming, while operating power dissipation can be as low as 10 uA typical. The -7 suffix identifies the 7 ns speed grade, making this version appropriate for control logic requiring short propagation delay while operating from a nominal 5 V supply. The ATF22V10C family provides 10 macrocells and approximately 500 gates in a 24-pin package. According to the Microchip ATF22V10C datasheet, electrically erasable Flash technology supports device reprogramming, while operating power dissipation can be as low as 10 uA typical. The -7 suffix identifies the 7 ns speed grade, making this version appropriate for control logic requiring short propagation delay while operating from a nominal 5 V supply. Typical uses include legacy interface decoding, industrial control sequencing, glue logic, counter and state-machine implementations, and compact system-support functions. The electrically erasable architecture also suits prototypes and field-updateable products where a conventional one-time-programmable fuse-based PLD would be less convenient. Designers should still verify the programmed fuse map and timing against the system clock budget. For a new board, preserve the 24-pin PDIP footprint and assign every 22V10-compatible pin according to the pin-description table in the manufacturer datasheet. Check whether unused inputs require defined logic levels and whether the design needs a 5 V supply within the supported tolerance. The same package also allows speed-grade substitutions to be evaluated without changing the PCB footprint. This page combines the manufacturer architecture description, distributor part identification, programming and pinout resources, drop-in family alternatives, and practical replacement considerations. It is intended to help engineers locate the datasheet, verify the package, compare speed grades, and determine whether the ATF22V10C-7PX remains appropriate for a legacy or redesign project.
ATF22V10C-7SC - 10-Macrocell 7 ns SPLD | Microchip
The Microchip Technology ATF22V10C-7SC is a high-performance electrically erasable programmable logic device with 10 macrocells, a 7.5 ns propagation delay, and a 24-pin SOIC package. It operates from a nominal 5 V supply and provides approximately 500 gates of programmable logic for implementing fixed Boolean functions in compact digital control systems. Its nonvolatile electrically erasable Flash configuration allows stored logic to be modified without removing the device from its circuit. A simple programmable logic device, or SPLD, is a user-programmable semiconductor that combines AND and OR logic structures into a flexible logic array. Within the semiconductor hierarchy, an SPLD sits between fixed logic gates and more complex field-programmable gate arrays. Unlike a mask-programmed logic device, an SPLD can be programmed by the equipment builder, making it useful for glue logic, interface control, state decoding, and compact product revisions. The ATF22V10C family combines 10 macrocells with electrically erasable Flash memory and a high-performance CMOS implementation. The ATF22V10C-7SC is identified as a 500-gate device with a 7 ns speed designation and a documented propagation delay of 7.5 ns. The family also supports speed options down to 5 ns and offers typical standby power dissipation as low as 10 uA. These characteristics make the device useful where deterministic propagation delay and reconfigurable nonvolatile logic are more important than very large gate counts. The 24-SOIC package provides a standard surface-mount footprint and room for power, ground, input, output, configuration, and control connections. Commercial-grade devices are specified around the nominal 5 V supply, while military and industrial speed ranges use wider 5 V plus or minus 10 percent characterization. The device supports programming and configuration operations suited to small-volume product customization, board revision control, and logic consolidation after discrete gates have been prototyped. Typical applications include interface decoding, control-signal translation, industrial automation modules, test-fixture logic, peripheral glue logic, and small embedded control systems. A designer can use the 10 macrocells to consolidate Boolean equations that would otherwise require several discrete IC packages. The same footprint is also attractive for maintaining a stable PCB across multiple ATF22V10C speed grades or configuration requirements. When laying out the board, place the device close to the signals it drives and route configuration pins away from high-current switching nodes. Confirm the programming algorithm and pin definitions in the Microchip ATF22V10C datasheet before connecting the programmer. Because the ATF22V10C-7SC is a nonvolatile SPLD rather than a processor, the design must define each Boolean equation and macrocell assignment explicitly. This page combines the device architecture, package information, practical programming guidance, parameter comparisons, and same-footprint ATF22V10C alternatives to support faster component evaluation and PCB-focused sourcing decisions.
ATF22V10C-7XC - 5V 10-Macrocell 7.5ns PLD | Microchip
The Microchip Technology ATF22V10C-7XC is a 5 V electrically erasable programmable logic device with 10 macrocells, a 7.5 ns propagation delay, and a 24-pin TSSOP package. The device uses CMOS electrically erasable Flash technology to implement combinational and registered logic in a compact surface-mount package. An electrically erasable programmable logic device, or EEPLD, is a semiconductor that stores a logic configuration in nonvolatile memory. It sits between fixed-function logic ICs and field-programmable gate arrays: unlike a conventional PAL or GAL device with fusible links, the ATF22V10C-7XC can be reprogrammed after its logic pattern has been established. Its 10 macrocells provide up to 500 gates for decoding, control, address mapping, interface conditioning, and other moderate-complexity logic. Key features include a nominal 5 V supply, a 7.5 ns speed grade, 10 user input/output pins, and operation over the commercial temperature range. The 24-pin TSSOP package measures approximately 4.40 mm in body width, making the device suitable for compact PCB layouts where a larger DIP or SOIC package would be inconvenient. Electrically erasable Flash technology also eliminates the one-time programming limitation of fuse-based PLDs. The ATF22V10C family supports multiple product-term configurations and operating modes for combinational, registered, complex combinatorial, and output-register functions. Its architecture is designed as a superset of the generic 22V10 architecture, supporting migration from compatible 24-pin combinatorial PLDs. The selected -7XC configuration provides a practical balance between operating speed and timing margin in 5 V digital control systems. Typical applications include industrial control interfaces, peripheral decoding, bus arbitration, legacy bus adapters, keyboard or display controllers, and compact embedded control systems. It is particularly useful when a design needs several decode equations and registered outputs but does not justify the complexity, cost, or static power of a larger FPGA or microcontroller. PCB design should preserve the device's supply and ground distribution, provide standard decoupling close to the power pins, and account for the 5 V operating requirement. Designers should also validate every programmed function and output state against the logic equations before releasing a production design. A programmable device changes configuration, not the PCB routing rules or the electrical limits of its package. This page combines the device's core operating specifications, programming and pinout guidance, drop-in replacement considerations, application guidance, and practical PCB design notes to support faster engineering evaluation.
ATF22V10CQ-15JU - 500-Gate 5V SPLD | Microchip Technology
The Microchip Technology ATF22V10CQ-15JU is a 5V electrically erasable CMOS simple programmable logic device with 10 macrocells, 500 gates, 83.3 MHz maximum operating frequency, and 10 user I/O pins in a 28-pin PLCC package. The 15 ns speed grade supports deterministic control and decoding logic where a PAL-compatible architecture is preferable to a microcontroller. A simple programmable logic device, or SPLD, is a user-programmable semiconductor that implements fixed Boolean functions through an AND-OR architecture. In the broader electronics hierarchy, an SPLD sits below a field-programmable gate array and above discrete gate arrays. It is programmed to implement address decoding, control sequencing, interface translation, and other fixed logic functions, then stores that configuration in electrically erasable Flash memory. The ATF22V10CQ-15JU provides 10 macrocells, approximately 500 gates, a 15 ns speed designation, and operation from a 5V supply. The device family supports speeds down to 5 ns and typical standby power dissipation as low as 10 µA. Its nonvolatile Flash configuration allows the programmed logic to remain available without repeatedly loading a program after power is removed. The electrically erasable CMOS implementation combines configurable logic density with low-power operation and 5V compatibility. The Q family designation identifies the qualified product family covered by the manufacturer datasheet, while the 15 speed grade and JU ordering code identify the specific performance and package configuration. These devices are useful when the logic requirement is stable, the design benefits from simple in-system programmability, and a full FPGA would add unnecessary cost or complexity. Typical uses include peripheral address decoding, bus-interface arbitration, industrial control sequencing, legacy data-acquisition interfaces, and glue logic around older processors. In each case, the device replaces multiple gates and state-holding elements with one programmable component while retaining deterministic propagation timing. The 10 user I/O pins also make the device appropriate for compact control and status interfaces. A critical implementation consideration is that the existing design must use the manufacturer pin-assignment and programming conventions for the ATF22V10C family. Confirm the PLCC footprint, supply decoupling, programming access, and unused I/O states in the manufacturer datasheet before releasing a new PCB. Any replacement must preserve the 28-pin PLCC footprint and the required 15 ns timing behavior. This product page combines the manufacturer device description, catalog package details, drop-in alternatives, comparison parameters, and practical validation guidance. It is designed to help engineers evaluate ATF22V10CQ-15JU for legacy PLD upgrades, board repairs, and new designs that benefit from compact nonvolatile programmable logic.
ATF22V10CQ-15SC - 10 Macrocell, 15 ns EE PLD | Microchip
The Microchip Technology ATF22V10CQ-15SC is a high-performance, electrically erasable programmable logic device with 10 macrocells, a 15 ns propagation delay, and a 24-SOIC surface-mount package. It operates from a nominal 5 V supply and combines erasable Flash-programmable logic with a compact gull-wing package suitable for PCB replacement and legacy control-system modernization. The device belongs to the 22V10 family of EE PLDs, where electrically erasable Flash memory supports in-circuit reprogramming without dedicated ultraviolet erasure. An EE PLD is a semiconductor whose configurable logic functions are stored in nonvolatile memory. In the broader hierarchy, the ATF22V10CQ-15SC is a programmable logic device, a user-programmable logic semiconductor, and ultimately an integrated circuit. Unlike a fixed-function logic IC, its macrocells and configurable interconnect can implement Boolean equations, registered logic, latch-based state retention, and other control functions before the device is programmed for its final application. The ATF22V10CQ-15SC provides 10 macrocells, 15 ns propagation delay, and a nominal 5 V operating supply. Its electrically erasable Flash architecture permits repeated configuration updates, making it useful where design revisions, production-programming changes, or field maintenance are important. A dedicated latch feature can hold inputs at their previous logic states, while the family architecture supports operating speeds down to 5 ns in appropriately selected speed grades. The device is a CMOS PLD with low power dissipation, including family-level typical power dissipation as low as 10 microamperes. The 24-SOIC package has a stated body width of 0.295 inch, or 7.50 mm, and uses a surface-mount gull-wing construction. The commercial suffix identifies the temperature-grade option, while the 15 code denotes the 15 ns performance class and SC denotes the package and ordering configuration. Typical applications include legacy industrial control, instrumentation, communications interfaces, embedded control logic, test fixtures, and general-purpose glue logic. In these systems, the PLD can consolidate several gates, counters, state machines, or interface functions into one configurable device. Programmable behavior can also shorten revisions to production logic without changing the printed circuit board. The primary design consideration is pin-compatible replacement planning. A substitute should reproduce the 24-SOIC footprint, 10-macrocell architecture, 5 V supply arrangement, and the required 15 ns timing class. Review the ATF22V10C(Q) datasheet pin description and programming documentation before replacing an installed device because package suffixes, speed grades, and programming-file compatibility must all be considered. This product page combines the manufacturer datasheet, ordering information, package details, operating characteristics, practical application guidance, and a qualified same-package replacement assessment. It is structured to help engineers identify the correct ATF22V10CQ-15SC configuration and evaluate reuse of an existing 24-SOIC PCB footprint without relying on packaging-only assumptions.
ATF22V10CQ-15XC - 15ns Glue-Logic PLD | Microchip
The Microchip ATF22V10CQ-15XC is a high-performance CMOS electrically erasable programmable logic device with 10 macrocells, approximately 500 gates, and a 15 ns speed grade. It is based on electrically erasable Flash memory and is packaged in a 28-pin PLCC. The device consolidates small quantities of combinational and sequential glue logic into one reprogrammable component, allowing design revisions without changing the PCB. A programmable logic device, or PLD, is a digital semiconductor whose internal AND-array, OR-array, and flip-flop resources can be configured to implement custom Boolean functions. Within the broader hierarchy, an SPLD is a programmable logic device, an SPLD is a semiconductor, and the ATF22V10CQ-15XC is a 10-macrocell CMOS SPLD. Unlike a fixed gate array or FPGA, it is intended primarily for compact control, decoding, address mapping, state-machine, and interface logic rather than high-density parallel processing. Key characteristics include a 15 ns device speed, 10 macrocells, and a stated family frequency of 83.3 MHz. Its electrically erasable Flash configuration supports reusable logic and simplifies firmware updates. The manufacturer datasheet also identifies low-power operation down to 10 uA typical for the ATF22V10C family, 200 mA latch-up immunity, and backward compatibility with the ATF22V10B(Q) and AT22V10(L) families. RoHS-compliant green-package options are identified for the ATF22V10CQ family. The ATF22V10C architecture provides a practical balance between capacity and implementation effort. Each macrocell can contribute combinational product terms and registered logic, allowing compact encoders, decoders, counters, state machines, and control sequences. Because the device is electrically erasable and reprogrammable, it is useful for prototypes, production control logic, and field updates where changing a programmed logic pattern is more efficient than respinning a board. Typical applications include DMA control, graphics-processing support, state-machine control, address decoding, PCI-interface glue logic, and general 5 V system control. The 10-macrocell structure can consolidate several small gates and flip-flops into a single package, reducing board area when the design does not require an FPGA or microcontroller. PCB design should preserve the device's standard PLCC footprint, socket compatibility, and programming access. Keep power and ground connections short, provide a stable 5 V supply, and follow the manufacturer's programming-device and decoupling recommendations. Confirm the package drawing and pin assignment for the exact suffix before layout because PLCC and surface-mount options exist within the broader ATF22V10C family. This product page combines the manufacturer's device description with package, speed, macrocell, technology, compliance, programming, and drop-in-replacement guidance. It also highlights practical differences among same-footprint family members so engineers can compare timing grade, temperature grade, and lifecycle considerations before committing a design.
ATF22V10CQ-15XI - 500-Gate 15ns 24-TSSOP PLD | Microchip
The Microchip ATF22V10CQ-15XI is a high-performance electrically erasable programmable logic device with 10 macrocells, approximately 500 logic gates, a 15 ns speed grade, and a 5 V operating supply in a 24-pin TSSOP package. It combines a 24-input, 10-output architecture with electrically erasable Flash memory, providing field-programmable logic without a dedicated external SRAM or mask-programming step. An EEPLD, or electrically erasable programmable logic device, is a user-programmable semiconductor that stores a logic configuration in nonvolatile Flash memory. It occupies a middle position between simple fixed-function gates and larger FPGAs. The ATF22V10CQ-15XI belongs to the broader PLD family, combining combinational and registered logic resources with a compact surface-mount footprint for glue-logic, control, decoding, and interface-control designs. The device provides 10 macrocells, approximately 500 gates, 24 I/O positions, and operation up to 83.3 MHz. Its 15 ns speed designation supports designs requiring deterministic propagation timing. Electrically erasable Flash technology allows the configuration to be reprogrammed during development, production, or field updates, while a typical low-power figure of 10 microamperes supports low-duty-cycle embedded control and legacy equipment modernization. The ATF22V10CQ family uses a 5 V supply and CMOS implementation. Because the configuration is stored in Flash rather than volatile memory, the programmed logic remains available after power is removed. The 24-pin TSSOP package is suitable for compact industrial, communications, consumer, and legacy control boards, although designers should confirm timing, output-drive, and power specifications against the manufacturer datasheet for the selected system voltage and temperature range. Typical uses include address decoding, control-signal multiplexing, keyboard and display controllers, interface glue logic, small state machines, and industrial equipment upgrades. In a replacement design, the PLD can consolidate several gates, counters, and combinational functions into one programmable component, reducing component count while retaining field-update flexibility. The principal design consideration is compatibility: logic equations, pin assignments, timing constraints, and supply requirements must be reviewed before replacing an existing device. The 24-TSSOP footprint also requires adequate copper clearance and solderable land geometry, while programming must use a compatible device programmer and the correct configuration file. This product record combines the Microchip family architecture, verified package and speed information, drop-in replacement analysis, practical programming guidance, and parameter-by-parameter comparison to support schematic review, PCB compatibility checks, and sourcing decisions.
ATF22V10CQZ-20JC - 20ns 10-Macrocell EE PLD | Microchip
The Microchip Technology ATF22V10CQZ-20JC is an electrically erasable CMOS programmable logic device with 10 macrocells, a 20 ns speed grade, and a 28-pin PLCC package measuring 11.51 x 11.51 mm. It combines reprogrammable flash-memory technology with zero standby power dissipation, CMOS- and TTL-compatible inputs and outputs, and up to 25 uA maximum standby current. A PLD, or programmable logic device, is a semiconductor whose internal logic is configured after fabrication. Within the broader hierarchy, this device is an EE PLD, then a CMOS PLD, then a programmable logic device, and finally a digital semiconductor. The ATF22V10CQZ architecture supports direct replacement of the generic 22V10 family and many 24-pin combinatorial PLDs, making it useful for compact glue logic, control logic, state decoding, and legacy system support. The device provides 10 macrocells, with each output receiving 8 to 16 product terms. Its industry-standard architecture simplifies migration from conventional PAL-type logic. Electrically erasable technology allows a finished board to be reprogrammed during development or manufacturing, while zero-power operation and a maximum standby current of 25 uA help control power consumption in systems that remain connected to power while the logic is inactive. The ATF22V10CQZ family is offered in speed grades down to 12 ns, and the ATF22V10CQZ-20JC is the 20 ns grade. CMOS- and TTL-compatible interfaces allow it to operate alongside both modern CMOS logic and legacy TTL-family signals. This combination of electrical erasability, low standby power, and conventional logic compatibility makes the device suitable for maintaining established control paths without committing to a more complex FPGA implementation. Typical applications include industrial control and instrumentation, interface decoding, legacy peripheral adaptation, embedded control logic, and small control systems that benefit from reconfigurable logic. The 10-macrocell capacity is well suited to compact Boolean functions that would otherwise occupy several conventional gate arrays or a larger programmable logic package. Designers should confirm the PLCC footprint, pin assignments, supply voltage, temperature grade, and programming-device support before placing the part. Because this is a legacy programmable logic device, new designs should validate whether a current PLD, FPGA, or small microcontroller offers better long-term sourcing, tooling, and lifecycle support. This page combines device specifications, structured comparison data, replacement guidance, and practical design considerations to help engineers assess the ATF22V10CQZ-20JC for legacy PLD designs, footprint-compatible substitutions, and migration decisions.
ATF22V10CQZ-20JI - 500-Gate CPLD, 20 ns | Microchip
The Microchip Technology ATF22V10CQZ-20JI is a high-performance electrically erasable CMOS programmable logic device with 10 macrocells, 500 equivalent gates, 10 I/O pins, and a 20 ns propagation delay. It is housed in a 28-pin PLCC package measuring 11.51 mm by 11.51 mm and operates from a 5 V supply. The ATF22V10CQZ family uses electrically erasable flash memory for nonvolatile configuration storage. An erasable programmable logic device, or EPLD, is a semiconductor that stores configurable Boolean logic in nonvolatile memory. It occupies the hierarchy between fixed-function gate arrays and field-programmable gate arrays: the logic architecture is fixed, but individual product terms and interconnect paths can be programmed to implement specialized control, decoding, address mapping, or glue-logic functions. Unlike a mask-programmed ASIC, an EPLD can be reprogrammed without changing the integrated-circuit package or PCB layout. The ATF22V10CQZ-20JI provides 10 macrocells and approximately 500 equivalent gates, making it useful for compact logic consolidation where several gates, counters, decoders, or state machines would otherwise occupy separate standard logic devices. Its 20 ns speed grade is intended for general-purpose control logic, while the electrically erasable CMOS process supports zero standby power dissipation according to the Microchip product page. Technical operation is based on user-selectable sum-of-products logic implemented through the device's macrocell architecture. The 28-PLCC footprint exposes 10 dedicated I/O pins, power connections, and programming or configuration-related terminals. Because this is a PLD rather than a mask-programmed gate array, the final logic function is established with a programming file and appropriate device programming equipment. Typical applications include industrial control interfaces, legacy peripheral glue logic, address decoding, programmable timing and sequence generation, test-system control, and embedded system logic that must retain its configuration after power is removed. Consolidating several conventional gate-level functions into one 28-pin PLD can reduce component count while preserving a straightforward software-driven configuration workflow. PCB design should preserve the manufacturer's PLCC land pattern, provide adequate programming access, and decouple the 5 V supply close to the device. Designers should also check every external signal against the family's voltage and timing limits because the ATF22V10CQZ-20JI is a 5 V, legacy-interface device rather than a modern 3.3 V or 1.8 V logic part. This page combines the manufacturer's device description with exact ordering details, verified package and speed information, structured replacement guidance, and practical design notes that help engineers evaluate the ATF22V10CQZ-20JI without relying only on basic distributor search results.
ATF22V10CQZ-20JU - 20 ns EEPLD, 10 Macrocells | Microchip
The Microchip Technology ATF22V10CQZ-20JU is a 20 ns electrically erasable CMOS programmable logic device with 10 macrocells, 28 I/O pins, and 10 registers, packaged in a 28-PLCC measuring 11.51 mm by 11.51 mm. It belongs to the ATF22V10C family of simple programmable logic devices, combining erasable flash memory with configurable digital logic for compact control, decoding, and interface functions. A simple programmable logic device, or SPLD, is a semiconductor that combines a fixed internal logic structure with user-programmable connections. Within the broader programmable-logic hierarchy, an SPLD sits below more complex CPLD and FPGA devices. It is useful when a design needs combinational or registered Boolean logic, but a full FPGA would add unnecessary cost, power, and programming complexity. The ATF22V10CQZ family implements this role using electrically erasable CMOS flash memory. The ATF22V10CQZ-20JU provides a nominal 20 ns speed grade, 10 macrocells, 28 I/O pins, and 10 registers. The wider ATF22V10CQZ family also supports speeds down to 12 ns and specifies zero standby power dissipation. Its electrically erasable architecture permits the stored logic configuration to be reprogrammed, making the device suitable for prototype refinement, production control logic, interface conditioning, and legacy equipment maintenance. The ATF22V10C family is based on electrically erasable flash technology rather than a one-time-programmable fuse array. This distinction allows design changes without replacing the device. Its 10 registers support registered logic operations, while the 10 macrocells provide the configurable Boolean building blocks used to implement product-term equations, state-machine decoding, and control sequences. Typical uses include industrial control logic, printer and copier sequencing, peripheral-interface decoding, data-routing networks, and replacement of GAL22V10-family logic in existing equipment. Its 28-PLCC package supports through-hole assembly and inspection, which is advantageous for legacy industrial and telecommunications platforms that were not designed around fine-pitch surface-mount packages. For a new design, verify every pin against the manufacturer pin-description table and confirm the programmed fuse map before production release. Use the manufacturer’s development programming environment and an equivalent device for functional simulation, and review timing assumptions at the system clock frequency before using this 20 ns grade in a demanding synchronous path. This page consolidates the device specifications, verified drop-in alternatives, package considerations, and practical replacement guidance into an engineering-focused selection reference. It also distinguishes speed-grade, package, and architecture differences that must be checked before treating a similarly named ATF22V10C device as an interchangeable replacement.
ATF22V10CQZ-20PC - 10-Macrocell CMOS PLD | Microchip
The Microchip Technology ATF22V10CQZ-20PC is a high-performance electrically erasable CMOS programmable logic device with 10 macrocells, a 5 V supply, and a 24-pin PDIP package. It combines a compact PLD architecture with electrically erasable flash-memory technology, allowing the implemented logic configuration to be reprogrammed without replacing the device. A programmable logic device is a semiconductor that stores a configurable Boolean logic function. The ATF22V10CQZ belongs to the PLD family, within the broader logic IC and semiconductor hierarchies. Its ten outputs are each allocated 8 to 16 product terms, making it useful for implementing compact combinatorial and registered control logic where a conventional gate array would be unnecessary. The ATF22V10CQZ family incorporates a superset of the generic 22V10 architecture and supports direct replacement of 22V10 devices and most 24-pin combinatorial PLDs. Three operating modes are selected automatically by configuration software. The family also provides high-speed operation, with speeds down to 12 ns across its supported speed ranges, while the -20PC suffix identifies a 20 ns device in the 24-pin PDIP configuration. Each output is implemented using product terms, while the device architecture supports simple combinational functions as well as more complex sequential logic. The electrically erasable flash-memory process retains programmed data without the complexity of a volatile configuration scheme and supports repeated in-circuit programming using the manufacturer’s recommended programming system. Typical uses include legacy industrial control, interface decoding, state-machine logic, data routing, and compact glue logic for older processor or peripheral systems. The ATF22V10CQZ-20PC is especially relevant to equipment that was designed around 24-pin DIP PLDs and requires a nonvolatile, reprogrammable logic implementation. For new PCB layouts, verify the complete pin assignment and programming requirements against the manufacturer datasheet before ordering. Existing 24-pin PLD boards should also be checked for supply voltage, timing, and pin-function compatibility. Because the device is a legacy-style PLD, software support and long-term availability should be confirmed before committing to a large redesign. This page combines the manufacturer’s device architecture information, package and application context, drop-in family alternatives, and practical selection guidance to help engineers determine whether the ATF22V10CQZ-20PC can be used without changing an existing 24-pin logic design.
ATF22V10CQZ-20SC - 20ns 500-Gate EEPROM PLD | Microchip
The Microchip Technology ATF22V10CQZ-20SC is a 20 ns, 500-gate electrically erasable programmable logic device in a 24-pin SOIC package. It contains 10 macrocells and uses CMOS electrically erasable flash memory, providing reprogrammable logic without a separate external programming device. The device operates from a 5 V supply and supports zero standby power dissipation. An electrically erasable programmable logic device, or EEPROM PLD, is a semiconductor that stores a logic configuration in nonvolatile memory. It belongs to the programmable-logic-device hierarchy, combining AND-array logic, OR-array logic, and nonvolatile configuration storage in one package. This makes an EEPROM PLD useful when a design needs flexible Boolean logic, rapid configuration changes, or a smaller alternative to a gate array. The ATF22V10CQZ-20SC provides a nominal 20 ns speed grade, 500 gates, and 10 macrocells in a 24-SOIC surface-mount package. Its electrically erasable CMOS architecture allows the programmed configuration to be rewritten in circuit. The manufacturer describes the ATF22V10CQZ family as supporting speeds down to 12 ns with zero standby power dissipation, although the target ATF22V10CQZ-20SC is the 20 ns ordering variant. The ATF22V10CQZ architecture incorporates a superset of generic 22V10 logic arrangements and supports direct replacement of 22V10-family and many 24-pin combinatorial PLD implementations. This architecture is useful for consolidating several gates, decoders, counters, state-machine functions, and address-selection logic into one programmable component. Its 24-pin SOIC footprint also supports conventional surface-mount assembly and automated test processes. Typical applications include industrial control interfaces, legacy peripheral emulation, programmable address decoding, data-routing logic, compact state machines, and embedded system glue logic. In a controller design, the PLD can consolidate decode functions that would otherwise occupy multiple discrete gate packages. It is particularly attractive where the logic requirements may evolve but the PCB should remain unchanged. Designers should preserve the pin assignments and programming interface of the original ATF22V10-family implementation. Verify the exact power-supply tolerance, temperature grade, clocking requirement, and unused-pin treatment against the manufacturer datasheet before releasing a new production design. Because this device is marked not recommended for new designs, legacy-product maintenance should preserve the original ordering code and programming data. This product record combines the device architecture, package information, ordering distinctions, lifecycle status, and practical design guidance. It also highlights the limitations of drop-in sourcing and provides application-focused guidance for engineers evaluating programmable-logic replacements in embedded and industrial systems.
ATF22V10CZ-12XC - 12ns EEPLD, 500 Gates | Microchip
The Microchip Technology ATF22V10CZ-12XC is a high-performance electrically erasable programmable logic device with 10 macrocells, a 500-gate architecture, and a maximum pin-to-pin delay of 12 ns in a 24-TSSOP package. The device operates from a 5 V supply and combines CMOS- and TTL-compatible inputs and outputs with zero-power operation and input transition detection for low standby consumption. An electrically erasable programmable logic device, or EEPLD, is a programmable-logic IC whose configuration is stored in nonvolatile electrically erasable memory. It belongs to the programmable-logic-device hierarchy, combining programmable AND-OR logic structures with a simple device-programming workflow. Unlike a mask-programmed PLD, an EEPLD can be reprogrammed during design updates, making it useful for evolving control, interface, and glue-logic designs. The ATF22V10C family provides 10 macrocells, equivalent to approximately 500 gates, with a 12 ns maximum propagation delay for the ATF22V10CZ-12XC speed grade. CMOS- and TTL-compatible interfaces simplify connections to mixed-voltage digital logic. Input transition detection supports zero-power operation by reducing activity-related consumption when configured inputs remain stable. Maximum standby power is specified at 25 µA under the applicable input-transition-detection conditions. Advanced electrically erasable technology makes the configuration reprogrammable, allowing a design to be updated without replacing the device. The architecture is intended for compact logic consolidation where a small gate count is sufficient and deterministic propagation delay is more important than a large FPGA fabric. The 24-TSSOP package provides a surface-mount form factor suitable for production boards, while the manufacturer's family documentation lists supported speeds down to 5 ns and very low typical power dissipation. Typical uses include interface control, industrial automation logic, peripheral decoding, data-format conversion, and compact control functions embedded around microcontrollers. It is particularly appropriate where legacy 22V10 PLD designs are being maintained, replicated, or moved to an electrically erasable implementation without changing the surrounding digital architecture. Because the ATF22V10CZ-12XC is identified as obsolete, long-term availability and migration planning should be addressed before new production commitments. When designing around this device, use the manufacturer's pin-description and programming tables to assign PCB tracks and configure the macrocells. Confirm the exact supply tolerance, temperature grade, output drive, and programming interface for the ordered suffix before committing to a new board. For an obsolete design, evaluate the pin-compatible speed-grade alternatives listed on this page or consider migrating the logic to a current PLD family when board area and timing requirements permit.
ATF22V10CZ-15JI 10-Macrocell 15ns PLD | Microchip
The Microchip Technology ATF22V10CZ-15JI is a high-performance electrically erasable CMOS programmable logic device with 10 macrocells, 500 logic gates, a 15 ns speed grade, and a 28-pin PLCC package measuring 11.51 mm by 11.51 mm. It uses J-leaded terminals in an industrial-temperature grade configuration. A simple programmable logic device, or SPLD, is a programmable semiconductor that replaces multiple fixed gate-logic packages with one configurable device. Its internal architecture divides a Boolean function into product-term-based macrocells. The ATF22V10CZ architecture extends the generic 22V10 family and supports direct replacement of many 24-pin combinatorial PLDs, placing it within the logic-programmable-device hierarchy of SPLD, complex PLD, and programmable logic technology. Each of the 10 outputs can be assigned approximately 8 to 16 product terms, and three operating modes are selected automatically by the programming software. The device provides CMOS- and TTL-compatible inputs and outputs, electrically erasable reprogrammable technology, and input transition detection for zero-power operation. A maximum standby power figure of 25 microamperes is specified for the zero-power operating mode. The ATF22V10CZ/CQZ architecture is designed to implement moderately complex combinational and registered control logic without consuming a programmable FPGA. Maximum pin-to-pin delay is listed at 12 ns for the device family, while the -15 speed designation identifies the 15 ns grade used by this part. Its ten macrocells and ten outputs make it suitable for address decoding, interface control, state-machine next-state logic, and programmable peripheral selection. Typical uses include industrial control and data-acquisition modules, legacy peripheral expansion, printer and scanner interfaces, instrument front ends, and automated test equipment. The device is also useful when a design requires a small quantity of configurable glue logic while avoiding the development and programming complexity of a larger CPLD. PCB design should preserve the 28-pin PLCC footprint and allow adequate clearance around the J-leaded terminals for soldering and inspection. Because the operating architecture is configured through software, validate the pin assignments, product-term allocation, and power-up behavior against the manufacturer's pin-description table and device programming requirements before releasing a new layout. This page combines device specifications, architectural details, application guidance, pin and package constraints, and practical drop-in comparison information. It also identifies the operating features that matter when deciding whether this legacy SPLD remains suitable for a new industrial design or whether a newer programmable-logic device provides a better long-term maintenance path.
ATF22V10CZ-15PI - 15ns 500-Gate EEPLD | Microchip
The Microchip Technology ATF22V10CZ-15PI is a high-performance, electrically erasable CMOS programmable logic device with 10 macrocells, a 500-gate logic capacity, a 15 ns propagation delay, and a 5 V operating supply. The device is packaged in a 24-pin dual in-line through-hole package with 0.300-inch lead spacing and is supplied in a tube for industrial-temperature designs. An electrically erasable programmable logic device, or EEPLD, belongs to the programmable-logic hierarchy that includes PLD, SPLD, CPLD, and FPGA technologies. Unlike a fixed gate array, an EEPLD stores a logic configuration in nonvolatile Flash memory. This allows the same physical device to implement different Boolean, control, decoding, or glue-logic functions, while retaining its configuration when power is removed. The ATF22V10CZ-15PI belongs to the ATF22V10C family and provides 10 macrocells with a stated 500-gate capacity. Its 15 ns speed designation makes it appropriate for control logic requiring faster response than the base ATF22V10C speed grade. Electrically erasable Flash-memory technology supports configuration changes without a dedicated programmer socket and avoids the ultraviolet-erase requirement associated with older erasable PLDs. The device operates from 5 V and is identified as an industrial-temperature-grade component. Its 24-PDIP through-hole construction supports conventional perforated-board assembly, educational prototyping, legacy control systems, and repair or modernization work where a surface-mount package would be impractical. The product-page information identifies the device as an EEPLD with a high-speed 500-gate implementation and 10 macrocells. Typical uses include address decoding, peripheral interfacing, state-machine control, data-routing logic, and compact combinational or sequential logic for industrial and instrumentation equipment. It is particularly useful when a board already has an ATF22V10-compatible footprint and where nonvolatile reconfiguration is valuable during commissioning, maintenance, or product-variant management. Designers should preserve the ATF22V10C supply-voltage and timing constraints, use the manufacturer's recommended programming algorithm, and verify every connected pin against the 24-PDIP pin-description table. Because the package is through-hole, pay attention to lead spacing and drilling dimensions before substituting it on an existing assembly. This page combines the exact device identity, package information, speed and macrocell characteristics with engineering guidance for programming, PCB compatibility, and selection among pin-compatible ATF22V10C options. It also provides practical sourcing and replacement guidance for engineers maintaining legacy programmable-logic designs.
ATF22V10CZ-15SI - 15ns CMOS PLD, 10 Macrocells | Microchip
Microchip ATF22V10CZ-15SI is a 5 V electrically erasable CMOS programmable logic device (PLD) with 10 macrocells, 500 gates, 15 ns speed grade, and a 24-SOIC package. The device combines programmable sum-of-products logic, 24 I/O paths, and electrically erasable Flash technology in a compact surface-mount package. A programmable logic device is a semiconductor that stores a Boolean logic configuration in nonvolatile memory. The ATF22V10CZ family belongs to the simple PLD hierarchy, where each macrocell combines AND-array logic with programmable output functions. This makes the device suitable for compact control, decoding, interface, and glue-logic functions where a small FPGA or microcontroller would be unnecessarily complex. Key features include a 15 ns speed grade, 10 macrocells, a nominal 5 V supply, CMOS- and TTL-compatible inputs and outputs, and electrically erasable reprogrammable Flash memory. The manufacturer describes zero-power operation in which standby current can remain as low as 25 microamperes when input transition detection is active. Its 24-SOIC package supports conventional surface-mount assembly while exposing the device’s I/O and configuration pins. The ATF22V10 architecture supports compact implementation of registered or combinational logic using industry-standard PLD design tools. A 15 ns grade is useful for moderate control and interface timing rather than high-speed synchronous systems. Zero-power operation helps reduce dynamic activity when input signals remain stable, although board-level behavior still depends on the programmed equations, output loading, supply voltage, and switching frequency. Typical uses include industrial control logic, peripheral decoding, status and alarm logic, display and communication interfaces, and legacy equipment. ATF22V10-based designs can also implement bus decoding, latch functions, pulse conditioning, and small state machines where a dedicated microcontroller would add unnecessary cost or board area. When designing a replacement, verify the exact package, speed grade, temperature grade, programming architecture, and power behavior in the manufacturer datasheet. A board-level substitute is only drop-in when its pin assignments, macrocell structure, programming algorithm, and electrical timing match the original device. This page organizes the device specifications, verified manufacturer and distributor references, same-footprint alternatives, selection guidance, and practical implementation considerations. The comparison focuses on package, speed, macrocell capacity, supply voltage, temperature grade, and programming compatibility so engineers can identify an interchange candidate without relying on an MPN suffix alone.
ATF22V10CZ-15XC - 15 ns EE PLD, 24-TSSOP | Microchip
The Microchip Technology ATF22V10CZ-15XC is a 5 V, 15 ns electrically erasable programmable logic device (EE PLD) with 10 macrocells in a 24-pin TSSOP package. It uses CMOS electrically erasable Flash memory and is intended for compact designs requiring deterministic combinational and registered logic without the complexity of a field-programmable gate array. The -15 speed grade supports propagation delays down to 15 ns, while the zero-power design targets low standby consumption. An EE PLD is a programmable logic device that stores its logic configuration in nonvolatile rewritable memory. Its internal structure combines programmable AND-array logic with a fixed output OR array, allowing several sum-of-products functions to be consolidated into one package. The ATF22V10C family is positioned between simple PAL devices and more complex FPGAs, making it useful for address decoding, control sequencing, interface translation, and glue-logic consolidation. The ATF22V10CZ-15XC provides 10 macrocells, a 5 V supply, a 15 ns speed designation, and a 24-terminal TSSOP package with gull-wing terminals. Its electrically erasable architecture permits a device to be reprogrammed during development or field updates instead of being replaced. The commercially graded -XC ordering code denotes the compact TSSOP mounting option, while the -15 designation identifies the 15 ns performance class. The family architecture supports programmable output polarity, product-term sharing, dedicated flip-flop capability, and registered output operation. These features allow the same device to implement combinational equations, clocked state elements, and mixed sequential-plus-combinational control blocks. Designers should consult the pin-description table and macrocell diagrams in the ATF22V10C datasheet before assigning external signals, particularly when using clock, reset, output-enable, and feedback inputs. Typical applications include peripheral address decoding, interrupt and DMA request control, state-machine sequencing, keyboard or display interface control, legacy bus-interface translation, and compact industrial control modules. The 24-TSSOP package reduces PCB footprint compared with the 24-pin PLCC and 24-pin DIP versions of the same device family, while its gull-wing lead geometry supports conventional reflow assembly and inspection. For new designs, first determine whether the 10-macrocell architecture covers the required logic equations and whether the 15 ns timing meets the system clock budget. Because the configuration memory is electrically erasable, include programming and verification steps in the manufacturing process and confirm the correct fuse map for the shipped logic design. This page consolidates package, timing, memory-technology, and ordering details with practical programming and replacement guidance for engineers evaluating legacy CPLD-based designs.
ATMXT224S-CCUR - 224-Node Touchscreen Controller | Microchip
The Microchip Technology ATMXT224S-CCUR is a capacitive touch screen controller IC from the maXTouch S-series family, featuring 224 mutual-capacitance sensing nodes and support for 1.5 mm passive stylus operation. It is supplied in a surface-mount package (per manufacturer product page; package variant code CCUR) and is designed for high-performance smartphone and tablet touchscreen applications. A capacitive touch screen controller is an integrated circuit that scans a grid of electrodes embedded in a touch panel, measures mutual capacitance changes caused by finger or stylus contact, and applies proprietary algorithms to convert raw signals into accurate touch coordinates. Within the signal-chain hierarchy, the touch controller sits between the touch sensor (passive ITO electrode matrix) and the host application processor, communicating touch data over an I2C or SPI interface. Key features of the ATMXT224S include 224 sensing nodes supporting touch panels up to roughly 8-9 inches, Microchip's patented capacitive touch technology, and passive stylus support at 1.5 mm tip width. These capabilities enable slim bezels, accurate handwriting input, and multi-touch performance required by premium mobile devices. Technically, the maXTouch S-series integrates a dedicated touch-processing engine with Microchip's noise-suppression algorithms, providing immunity against charger and display noise - a critical requirement as displays and charging circuits inject common-mode interference into touch panels. Typical applications include smartphones, tablet touch panels, portable media players, and industrial human-machine interfaces (HMI) that require multi-touch and stylus input. Important design consideration: Microchip's official product page for ATmXT224S states that the recommended alternative touch controller is the ATMXT336U, and the mXT224S is being superseded; new designs should evaluate the successor family. Firmware/configuration data is programmed into the maXTouch controller at production, so design-in requires Microchip's maXTouch development tools. This page synthesizes verified distributor pricing, lifecycle status, and alternative controller guidance not consolidated in the manufacturer datasheet.
ATMXT336S-MAUR - 336-Node Touchscreen Controller IC | Microchip
The Microchip Technology ATMXT336S-MAUR is a maXTouch 336-node mutual-capacitance touchscreen controller IC designed for high-performance smartphones and mobile devices, delivered in a reel-packaged surface-mount package (MAU suffix). A capacitive touchscreen controller is a mixed-signal IC that drives and senses a grid of mutual-capacitance nodes on a touch panel, converts raw capacitance changes into digitized touch coordinates, and reports gesture data to a host processor. Within the power management and human-interface hierarchy, it sits between the passive touch panel and the application processor, forming part of the sensor and interface IC layer of a mobile system. Key features include 336 mutual-capacitance sensing nodes, support for 2.0 mm passive stylus input, moisture robustness for wet-finger tracking, and superior electrical noise immunity for operation in hostile AC-charger and display-noise environments, according to the Microchip product page. The maXTouch architecture uses patented capacitive touch acquisition technology with on-chip signal processing, enabling high signal-to-noise ratio touch reporting at high report rates. This makes the mXT336S well suited to dense sensor patterns on thin phone form factors where water rejection and stylus resolution are critical differentiators. Typical applications include premium smartphone touchscreens, small-to-medium tablet and phablet panels, and portable consumer devices requiring passive stylus support and wet-hand operation. When designing with the mXT336S, confirm panel node count and pin mapping against the maXTouch family configuration, and note that Microchip officially recommends the ATMXT336U as the alternative touch controller for this part. This page synthesizes verified distributor pricing, the Microchip-recommended alternative, drop-in family options, and practical sourcing guidance not consolidated in the manufacturer datasheet alone.
BCM47083SJ03 - 2+3GE WLAN 11N/11AC SoC | Broadcom
The Broadcom BCM47083SJ03 is a 2+3 Gigabit Ethernet WLAN chipset system on chip supporting 802.11n and 802.11ac in a tray package. The verified product description identifies a two-plus-three Gigabit Ethernet configuration, meaning two integrated Gigabit Ethernet MAC/PHY positions and three additional Gigabit Ethernet interfaces supported by the chipset family. The device is positioned for embedded networking equipment that combines wired Ethernet connectivity with dual-band wireless LAN capability. An embedded wireless system on chip is an integrated semiconductor platform that combines a network processor, Ethernet controllers, wireless radio functions, memory interfaces, and associated control logic. In the product hierarchy, BCM47083SJ03 is a WLAN chipset, an RF system-on-chip, an embedded networking processor, and ultimately a semiconductor designed to reduce the component count required in a router, access point, or connected home gateway. This integration simplifies PCB layout while requiring careful power, thermal, antenna, and Ethernet signal-integrity design. The principal documented feature is support for 802.11n and 802.11ac WLAN operation together with a 2+3 Gigabit Ethernet arrangement. The verified listings classify the part as a “2+3 GE WLAN chipset (11N+11AC).” This combination is relevant to multi-port routers, cable gateways, enterprise wireless access points, and consumer gateways that need several Ethernet connections while retaining Wi-Fi capability. The exact processor clock, memory interface, radio band coverage, and port-level electrical ratings are not stated in the supplied source data and must be confirmed from the manufacturer documentation before design release. Broadcom markets the BCM47083 family as an RF system-on-chip for embedded networking applications. Integrating the WLAN and Ethernet functions into one device can reduce external component count and simplify software bring-up compared with a processor-based design using discrete Ethernet PHYs. However, integrated functionality does not remove the need for careful board partitioning: high-speed digital interfaces require controlled return paths, while radio, Ethernet magnetics, clocks, and power conversion must be isolated to prevent interference. Typical uses include gigabit routers, dual-band wireless access points, home gateways, set-top gateways, and embedded network appliances. In a router application, the BCM47083SJ03 can provide the central combination of multi-gigabit wired connectivity and 802.11n/802.11ac wireless networking. The same general architecture can support access-point designs where Ethernet ports backhaul wireless clients, although radio calibration, antenna matching, regulatory configuration, and country-specific channel requirements remain system-level tasks. Designers should not release a PCB based only on distributor summaries. The official package drawing, exposed-pad or ground-ball details, pin assignments, recommended power rails, decoupling network, crystal or oscillator requirements, Ethernet magnetics interface, and reference schematic must be obtained before layout begins. The supplied data identifies tray packaging but does not provide the exact package dimensions, ball count, pin map, or exposed thermal construction. These omissions are recorded in the specification fields rather than inferred from similar Broadcom devices. This product record consolidates verified distributor descriptions, stock references, package-format information, application context, and qualified replacement guidance that are not presented together on a manufacturer product page. It also separates confirmed BCM47083SJ03 attributes from specifications that require the official datasheet, preventing assumptions about unverified processor, RF, memory, thermal, and compliance details.
BCM5396IFB - 16-Port Gigabit Switch | Broadcom
Broadcom BCM5396IFB is a 16-port Gigabit Ethernet switch with integrated SerDes, delivering a 17-Gigabit non-blocking switching fabric in a BGA package. It includes seventeen IEEE 802.3-compliant MACs, sixteen SGMII/SerDes interfaces, a 256-KB packet buffer, and one GMII/RGMII/RvMII uplink. An Ethernet switch is a semiconductor that receives Ethernet frames on multiple ports, stores them briefly, examines addressing information, and forwards each frame only toward its destination port. The BCM5396 combines physical-layer SerDes interfaces, Media Access Controllers, address management, packet buffering, and switching control within one monolithic 0.13 µm CMOS device. This integration reduces the component count required for multiport Gigabit networking equipment. The verified BCM5396 data identifies sixteen SGMII/SerDes ports, seventeen compliant MACs, one GMII/RGMII/RvMII interface, and a non-blocking 17-Gigabit Ethernet switch fabric. It supports jumbo frames up to 9 KB and includes a 256-KB packet buffer. The Broadcom datasheet also states compliance with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and IEEE 802.3x, including MAC-control PAUSE handling. Technical implementation centers on the integrated SerDes interfaces and the internal switching architecture. Sixteen Gigabit Ethernet links terminate through SGMII/SerDes, while a separate parallel interface supports an uplink or management-facing port. The switch fabric is designed to forward traffic without a blocking bottleneck across the aggregate 17-Gigabit capacity, and packet buffering absorbs short traffic bursts before forwarding decisions are completed. Typical applications include 16-port Gigabit Ethernet switches, industrial network equipment, network-interface appliances, aggregation equipment, and embedded systems requiring multiple copper or fiber-linked Ethernet ports. The parallel uplink can connect the switched ports to a host processor, another switch, or a router, depending on the surrounding system architecture. PCB design must follow the manufacturer’s BGA land pattern, ball assignment, power, clock, SerDes, and decoupling requirements. Differential high-speed pairs need controlled impedance, uninterrupted reference planes, minimized stubs, and manufacturer-recommended spacing. Because the supplied excerpts do not include operating voltage, temperature range, pin list, or exact package dimensions, those values should be confirmed from the full manufacturer datasheet before release. This product record combines verified source links, procurement fields, interface facts, and design-focused context. The alternatives list remains intentionally limited because the supplied cross-reference search did not identify any verified pin-compatible replacement MPNs.
BCM5396KFB - 16-Port Gigabit Switch IC | Broadcom
The Broadcom BCM5396KFB is a 16-port Gigabit Ethernet switch integrated circuit with integrated SerDes, specified in a 256-pin FBGA package and a 16,000 Mbps switching capacity. It combines the packet buffer, Media Access Controllers, address management, and a non-blocking switch controller in one monolithic 0.13 µm CMOS device, providing a compact foundation for multiport Ethernet systems. A Gigabit Ethernet switch is a network-semiconductor device that receives Ethernet frames through multiple ports, maintains the required MAC and address information, and forwards traffic through an internal switching fabric. Ethernet switching belongs to networking and communications electronics, where throughput, port density, media interfaces, buffering, and frame handling determine whether a system can support simultaneous data flows without unnecessary contention. The BCM5396KFB's principal verified features include 16 Gigabit Ethernet ports, integrated SerDes, and a non-blocking switch controller. Its listed aggregate throughput is 16,000 Mbps. The Broadcom datasheet also states compliance with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and IEEE 802.3x, including MAC-control PAUSE-frame support. These functions place the device in the family of Ethernet interface and switching semiconductors rather than a general-purpose microcontroller or standalone physical-layer transceiver. The monolithic 0.13 µm CMOS implementation consolidates packet buffering, MACs, address management, and switching control. That integration can reduce the number of external network components in a designed platform, although board-level operation still depends on power delivery, clocking, SerDes implementation, thermal conditions, magnetics or PHY integration, and validated firmware or driver support. The supplied distributor references classify the part as a 16-port layer-2 Gigabit switch with integrated SerDes. Typical equipment uses include 16-port managed Gigabit Ethernet switches, industrial Ethernet aggregation, network-interface appliances, telecom access equipment, and embedded systems that need multiple copper or fiber-facing ports. These uses are consistent with the verified 16-port architecture; exact supported media type, connector arrangement, electrical limits, and board implementation must be confirmed from the complete manufacturer datasheet before release. Engineers should preserve the manufacturer's ball map, power and decoupling layout, thermal design, and high-speed routing constraints. A 256-pin FBGA is demanding to route and inspect, so assembly yield, via-in-pad policy, solder-mask definition, and X-ray or AOI coverage should be reviewed early. This page separates verified facts from unavailable electrical details and avoids treating distributor classifications as substitutes for a complete pinout. This page consolidates distributor sourcing, datasheet references, design cautions, and strict drop-in-compatibility checks that are not available from a bare distributor listing. Because no verified substitute shares the exact BCM5396 footprint and electrical configuration, engineering review is required before any proposed replacement is approved.
BCM5665KPB - 48FE+4FE HiGig Switch | Broadcom
The Broadcom BCM5665KPB is a StrataXGS BCM5665 integrated multilayer switch with 48 Fast Ethernet ports plus 4 additional Fast Ethernet interfaces, supplied in a [DATA_NEEDED: package]. It is designed for telecom-oriented Ethernet switching systems in the Interface ICs category, where integrated Layer 2 and Layer 3 switching functions consolidate multiple physical ports into a dedicated switching device. The verified distributor results identify the BCM5665 family and describe the KPB part as a 48FE+4FE HiGig switch, but they do not provide the complete electrical, timing, thermal, package, or pinout data needed for a definitive hardware design. A switch ASIC is an integrated circuit that moves Ethernet frames between ports using dedicated switching resources and integrated packet-processing functions. In the semiconductor hierarchy, this device is a network switch, interface IC, Ethernet switching ASIC, and specialized semiconductor. Unlike a general-purpose processor, its primary role is high-throughput frame transfer and network-traffic handling rather than software execution. The BCM5665 series is relevant to telecom access, aggregation, and carrier Ethernet equipment, subject to the exact Broadcom product documentation. The verified listing provides one concrete functional description: 48FE+4FE HiGig switching. This notation indicates 48 Fast Ethernet ports and four additional Fast Ethernet ports. However, the source does not define whether those four ports are copper, fiber, integrated PHY, or otherwise exposed through a specific interface. No supported switching fabric rate, packet rate, MAC address size, memory interface, process voltage, operating temperature, or power consumption is present in the supplied material. A typical telecom implementation would place this switch ASIC on a line card or aggregation platform, connect front-panel Fast Ethernet interfaces to access traffic, and route frames internally between line cards or uplink ports. Such a design requires the manufacturer pinout, recommended reference design, power rails, clocking, reset requirements, SerDes or PHY documentation, thermal data, and PCB constraints. Those details must be obtained before schematic capture or layout begins. The principal design consideration is procurement risk. This appears to be a legacy Broadcom networking device introduced around 2001 according to the supplied GlobalSpec result, and search results describe supply as limited. Buyers should authenticate source, inspect date codes, request traceability, and obtain manufacturer lifecycle notices rather than assuming new-production availability. Counterfeit screening is especially important for obsolete or legacy telecom semiconductors. This page consolidates verified distributor identity, port-family information, sourcing links, and explicit engineering-data gaps. It intentionally avoids inventing clock rates, package dimensions, electrical limits, pin names, or replacement parts because the supplied evidence does not establish those values. Before purchase or design-in, request the exact Broadcom datasheet, package drawing, revision history, and written lifecycle status directly from Broadcom or an authorized source.
BCM5698B0IPBG - 12-Port Gigabit Ethernet Switch | Broadcom
Broadcom BCM5698B0IPBG is a 12-port Layer 2 Gigabit Ethernet switch designed for high-speed network aggregation, switching, and industrial Ethernet equipment. The device provides 12 Gigabit Ethernet ports in a Broadcom PBG package and is identified as a Layer 2 switching IC within the integrated interface semiconductor hierarchy. Its architecture supports the aggregation of multiple Gigabit Ethernet links into higher-bandwidth network backbones, making it suitable for managed network infrastructure, industrial automation systems, and embedded communication equipment. An Ethernet switch is a semiconductor that receives frames on one port, examines addressing information, and forwards traffic to the appropriate destination port. A Layer 2 switch performs this operation at the data-link layer rather than routing packets through the network layer. By integrating 12 Gigabit Ethernet ports into one package, the BCM5698B0IPBG reduces the component count and board complexity required for a multiport Ethernet aggregation point. The primary documented performance attribute is support for 12 Gigabit Ethernet ports. Gigabit Ethernet corresponds to a nominal 1 Gbit/s network rate per port, allowing the switch fabric to aggregate substantial aggregate traffic when several ports operate simultaneously. The exact forwarding rate, latency, internal memory configuration, host interface, management features, and supported PHY types must be confirmed in the manufacturer datasheet before final system qualification. The PBG package designation identifies the physical assembly used by this ordering code, but detailed dimensions, pin assignments, thermal limits, and exposed-pad requirements are not stated in the available product records. Engineers should use the BCM5698 datasheet and the package drawing when assigning power, ground, reference-clock, management, and media signals. The B0 revision suffix should also be checked against the latest manufacturer change notices. Typical deployments include industrial Ethernet switches, factory-floor control networks, access-network aggregation, embedded telecom equipment, and network appliances requiring multiple copper or fiber-facing ports. In these systems, the switch can consolidate several 1 Gbit/s links before forwarding traffic to an uplink, storage system, or controller. Power delivery, clock quality, thermal management, and signal-integrity layout are critical design considerations. Follow the manufacturer’s recommended decoupling network, provide a stable low-noise reference clock where required, and validate magnetics or PHY integration according to the supported copper-media architecture. Confirm lane ratings, auto-negotiation behavior, and environmental limits on the selected board revision. This page consolidates the verified port count, Layer 2 function, package designation, sourcing information, replacement constraints, and engineering guidance needed to evaluate the BCM5698B0IPBG for a 12-port Gigabit Ethernet design.