بەرهەمەکان (720+)

CD40102BD - 8-Stage BCD Down Counter | Texas Instruments
CD40102BD

CD40102BD - 8-Stage BCD Down Counter | Texas Instruments

Texas Instruments CD40102BD is a CMOS 8-stage, presettable synchronous down counter packaged in a 16-pin ceramic dual in-line package. It operates across a 3 V to 18 V supply range, accepts positive-edge clock transitions, and supports counting frequencies up to 4.8 MHz. The device is designed for decade-oriented counting, programmable sequencing, frequency division, and industrial control logic requiring BCD-compatible outputs. A synchronous binary-coded decimal counter is a type of logic counter that advances or decrements its internal state on an active clock edge and presents each state through four parallel BCD output lines. The CD40102BD belongs to the CMOS CD4000 logic family, where the counter chain is synchronously clocked and the parallel outputs retain BCD count formatting. This places the device within the broader hierarchy of counters and dividers, digital logic ICs, and semiconductor components. The primary electrical features include a 3 V to 18 V operating supply range, a maximum counting rate of 4.8 MHz, and positive-edge clocking. Its BCD outputs provide four binary-weighted bits per decade, while preset and control inputs allow a count to be loaded before normal decrementing begins. These functions make the counter useful where a system must count down in decimal steps rather than operate as a conventional binary counter. The CD40102BD uses synchronous counter stages so the counting states change on the same clock edge rather than propagating as asynchronous ripple events. Synchronous operation reduces output-transition uncertainty and simplifies use in systems requiring repeatable decade states. Because it operates from the CD4000 CMOS family, the device is intended for low- and medium-voltage digital logic systems, subject to the detailed limits and test conditions in the manufacturer datasheet. Typical uses include programmable test-sequence controllers, decade counters for instrumentation, industrial timing systems, clock-divider networks, and embedded automation logic. In a frequency-divider arrangement, the counter stages can divide an input clock by decade-related ratios. In a sequencing circuit, preset inputs establish the starting state and the synchronous outputs provide a repeatable countdown toward zero. For reliable operation, use the supply voltage and signal levels specified by the manufacturer, connect unused digital inputs to a defined logic level, and observe the maximum clock frequency at the actual supply voltage and temperature. Decoupling capacitance should be placed close to the supply pins, while external reset and preset timing must remain within the datasheet limits. This page combines manufacturer-device information, lifecycle and sourcing guidance, parameter comparisons, pin-assignment cautions, and practical design notes. It also identifies same-footprint alternatives where documented, helping engineers distinguish a true drop-in replacement from a functionally similar counter that requires a different package or interface.

RFQ پەیوەندی
CD40102BE - 8-Stage BCD Down Counter | Texas Instruments
CD40102BE

CD40102BE - 8-Stage BCD Down Counter | Texas Instruments

The Texas Instruments CD40102BE is a CMOS 8-stage, two-decade BCD synchronous down counter with a 4-bit counter element and positive-edge clocking, housed in a 16-pin dual-in-line plastic package. It counts downward from a programmed preset value and provides a zero output when the internal count reaches zero, making it useful for timing, sequencing, and event-counting circuits. A synchronous BCD counter is a logic integrated circuit that advances its internal decimal count on an active clock transition rather than through ripple-style gating. The CD40102BE combines two cascaded 4-bit BCD stages, creating an eight-stage counting architecture with separate decade sections. This device belongs to the broader hierarchy of counter logic, digital logic IC, and CMOS semiconductor families used to implement deterministic state sequencing in electronic systems. The principal features of the CD40102BE include presettable operation, synchronous down counting, two BCD decades, a four-bit counter interface, and positive-edge triggering. The manufacturer datasheet also identifies the E package as a 16-lead dual-in-line plastic package. The 0.300-inch, 7.62 mm package dimensions describe a leaded through-hole format suitable for conventional PCB assembly, prototyping, repair, and industrial control systems where a surface-mount package would offer no practical benefit. Operationally, the counter supports clock enable and control functions for coordinating counting with surrounding digital logic. Preset and clear controls allow the count to be initialized from an external BCD value or returned to a defined terminal condition. Because the output indicates the zero count, the circuit can be cascaded with other digital blocks to create longer count intervals, event windows, or repetitive system timing sequences without relying on a microcontroller for simple counting tasks. Typical uses include industrial batch and cycle counting, laboratory timer modules, digital test equipment, automotive control modules, and general-purpose sequencing logic. The synchronous counting architecture helps maintain a defined relationship between clock edges and count states, while the BCD organization maps directly to decimal displays, decade-based dividers, and equipment that presents count values in human-readable form. When laying out a board around the CD40102BE, route the clock and control traces away from noisy switching nodes and keep all unused inputs at defined logic levels. Because the E package is a leaded 16-PDIP design, use the manufacturer's pin-description table and package drawing for every connection and verify the correct counter orientation during inspection. This page combines the manufacturer identification, counter architecture, package details, drop-in sourcing analysis, comparison parameters, and practical implementation guidance. It is intended to help engineers determine whether the CD40102BE matches the required BCD count range, control interface, package, and through-hole assembly process before releasing a production design.

RFQ پەیوەندی
CD40103BD - 8-Bit Synchronous Down Counter | Harris
CD40103BD

CD40103BD - 8-Bit Synchronous Down Counter | Harris

The Harris Corporation CD40103BD is an 8-bit CMOS presettable synchronous binary down counter packaged in a 16-lead ceramic dual-in-line package. It contains one counter element, counts downward on each positive clock edge, and supports parallel loading of the eight count-data inputs for initialization from 0 through 255. The through-hole 16-CDIP construction and military temperature designation identify it as a ruggedized counter intended for demanding digital control and timing systems. A synchronous binary counter is a digital logic device that advances through a fixed binary sequence in response to clock transitions. Unlike an asynchronous ripple counter, the CD40103BD changes its outputs at the same clock transition, reducing accumulated propagation delay across the eight output stages. Presettable counters add a parallel-load function so the internal count can be set to a chosen value before counting resumes. This device therefore belongs to the CMOS 4000-series counter family and the broader category of counters, dividers, and logic ICs. Principal features include 8-bit counting capacity, binary count direction, one counter element, positive-edge triggering, synchronous operation, and a preset capability. The counter operates from a dual power supply, making its clock, preset, and count-data interface electrically compatible with other CD4000-series CMOS devices. Because the counter is synchronous, it is better suited to accurate frequency division and multi-digit count sequencing than a ripple counter with cumulative stage delay. Typical uses include programmable frequency dividers, digital timing chains, industrial sequence controllers, event counters, timing-reference circuits, and test equipment. In each case, the eight count outputs can represent the current binary count, divide an input clock by a selected power of two, or provide parallel count data for downstream decoding. The synchronous count transition also helps maintain predictable timing relationships between adjacent counter outputs. In a new PCB design, follow the manufacturer pin-description table when connecting the clock, count-data, preset, carry, and reset inputs. Allow adequate signal-transition time for the CMOS inputs, and use pull-down or pull-up resistors where an unused control input requires a defined bias. Treat the 16-lead ceramic DIP as a through-hole package with no exposed thermal pad. Before substituting a different manufacturer or temperature grade, verify the counter direction, clock-edge convention, preset polarity, reset behavior, supply voltage, and absolute maximum ratings in the relevant datasheet. This page consolidates the available manufacturer and distributor information for CD40103BD, compares pin-compatible counter options, and summarizes the design checks needed for reliable integration into legacy CMOS and industrial counter systems.

RFQ پەیوەندی
CD40103BE - 8-Bit Synchronous Down Counter | Texas Instruments
CD40103BE

CD40103BE - 8-Bit Synchronous Down Counter | Texas Instruments

Texas Instruments CD40103BE is a CMOS 8-stage, 8-bit binary synchronous down counter with preset capability, supplied in a 16-lead plastic dual-in-line package. The counter decrements on each positive clock edge and provides a terminal-count indication when the internal count reaches zero. Its 16-PDIP construction supports through-hole assembly, prototyping, repair, and industrial control systems where a socketed or manually assembled counter is practical. A binary counter is a digital logic component that stores a sequence of binary states. A synchronous down counter advances its count on the active clock edge rather than through a ripple between multiple stages, helping maintain predictable timing in control and sequencing systems. The CD40103BE belongs to the CMOS 4000-series logic family and combines counter state, parallel preset loading, and terminal-count signaling in one integrated circuit. The principal functional characteristics are an 8-bit counting range, eight internally cascaded synchronous stages, positive-edge triggering, and one 16-PDIP package. Preset inputs allow a parallel count value to be loaded for an arbitrary starting state. This makes the device useful when a system must count downward from a selected value rather than always beginning at the maximum count. The manufacturer identifies the device as a presettable 8-stage synchronous down counter. Compared with a ripple counter assembled from separate flip-flops, the synchronous architecture centralizes state transitions in one CMOS IC. That is valuable in timing-sensitive systems because the counter does not depend on cumulative propagation delays through eight external stages. The terminal-count output can also be used to detect the end of a counting interval, while the preset function establishes the next operating sequence without external decoding logic. Typical uses include industrial sequence controllers, batch and process timers, repetitive test equipment, digital chronometers, laboratory pulse counters, and programmable timing modules. The device can also serve as a reusable down-counting element in larger cascaded systems. Designs should preserve the truth-table distinction between clock, preset, count, and terminal-count functions and should account for the behavior required during preset loading. For through-hole implementation, verify every connection against the manufacturer pin-description table and observe the specified supply and input-voltage limits. Pay particular attention to how the preset and asynchronous controls interact with the clock. Do not infer timing limits or logic thresholds without consulting the current manufacturer datasheet, particularly when replacing an existing counter in safety-critical or production equipment. This product page combines the manufacturer function description, verified package and ordering information, practical application guidance, and a conservative replacement analysis. It also distinguishes a genuine same-footprint option from related counters that use different packages or function as complementary up counters.

RFQ پەیوەندی
CD4010BE - CMOS Hex Buffer/Converter | Texas Instruments
CD4010BE

CD4010BE - CMOS Hex Buffer/Converter | Texas Instruments

The Texas Instruments CD4010BE is a CMOS hex non-inverting buffer/ converter with six one-bit elements, push-pull outputs, and a 16-pin PDIP package. It is designed for CMOS-to-TTL or DTL logic-level conversion and can also serve as a CMOS high-sink-current driver. The verified manufacturer product information identifies the device as a 16-pin non-inverting hex buffer/converter operating across a temperature range of -55 °C to 125 °C. A logic buffer is a digital IC that reproduces a binary input at its output while providing buffering, isolation, or voltage-level translation. A level converter sits within the broader hierarchy of logic ICs and interface ICs, connecting circuits that use different voltage domains. The CD4010BE belongs to the CMOS 4000-series logic family and combines six non-inverting conversion channels in one through-hole package. The six-element architecture allows multiple logic signals to be buffered within a single integrated circuit. Each channel operates as a one-bit, non-inverting element, while the push-pull output configuration provides a defined output arrangement. This makes the part relevant to legacy digital systems that need a compact solution for translating logic levels or driving multiple CMOS loads without changing an existing DIP-based board. The CD4010BE can be used as a CMOS-to-TTL or DTL interface element because the manufacturer documentation specifically identifies those conversion roles. It can also operate as a CMOS high-sink-current driver, providing a useful distinction from a plain passive buffer. The 16-lead PDIP format supports conventional through-hole PCB assembly and is compatible with standard 7.62 mm pitch layouts. Typical uses include legacy processor and peripheral interface circuits, control-logic boards, instrumentation, industrial control systems, and repair or modernization of equipment built around TTL and CMOS logic. In a level-shifting circuit, one CD4010BE can handle six related signals, reducing component count compared with discrete converters. Its non-inverting behavior preserves the logical relationship between each input and corresponding output. The primary design consideration is that this is a DIP-16 through-hole device rather than a surface-mount part. Board layout, connector spacing, assembly method, and mechanical clearance must therefore account for the package dimensions and 7.62 mm lead pitch. Engineers should also verify operating voltage, input levels, output drive, and timing against the complete manufacturer datasheet before using the converter in a new voltage domain. This product page consolidates verified manufacturer and distributor information, sourcing details, technical comparisons, and practical replacement guidance. It is designed to help engineers evaluate the CD4010BE, locate its documentation, understand its intended logic-converter role, and determine whether a verified drop-in substitute is available for an existing 16-pin design.

RFQ پەیوەندی
CD4010BF - Hex Non-Inverting Buffer/Converter | Texas Instruments
CD4010BF

CD4010BF - Hex Non-Inverting Buffer/Converter | Texas Instruments

Texas Instruments CD4010BF is a CMOS hex non-inverting buffer/ converter containing six independent one-bit buffer elements in a 16-pin CDIP package. The device provides push-pull outputs and can be used as a CMOS-to-TTL or DTL logic-level converter or as a CMOS high-sink-current driver. Its six-channel organization makes it suitable for buffering six control, address, or data signals where non-inverting logic behavior and a ceramic-DIP footprint are required. A buffer is a digital interface component that reproduces a logic input at its corresponding output while providing isolation, drive strength, or voltage-level translation between circuit domains. The CD4010BF belongs to the CMOS logic hierarchy: buffer/ converter, digital buffer, logic IC, and semiconductor. Unlike an inverting buffer, every output follows the polarity of its associated input, which simplifies control-signal routing where active-high or active-low logic must remain unchanged. The principal documented features include six non-inverting elements, one bit per element, push-pull output, CMOS construction, and a 16-pin CDIP package. The verified Texas Instruments product information identifies an operating temperature range of -55°C to +125°C. The search data also describes the device as suitable for CMOS-to-TTL or DTL level conversion and as a high-sink-current driver, although detailed output-current, supply-voltage, propagation-delay, and absolute-maximum limits were not included in the supplied records. Typical uses include buffering control signals between older CMOS and TTL logic families, driving compatible digital inputs, isolating multiple lines in industrial equipment, and preserving six logic channels in legacy instrumentation. Because the B suffix denotes the temperature grade in the naming convention shown by Texas Instruments, engineers should confirm ordering details, grade requirements, and sourcing directly against the manufacturer documentation before placing a production order. The principal design consideration is to verify the target logic family’s input thresholds and output drive requirements in the complete datasheet. A CDIP package is also mechanically distinct from surface-mount options, so an SOIC or other alternative cannot be treated as a direct PCB drop-in replacement. Existing 16-pin ceramic-DIP layouts may accept pin-compatible CD4010B-family devices, but supply-temperature grade and manufacturer qualification still need separate review. This page consolidates verified distributor and manufacturer references, package details, documented operating-temperature information, drop-in candidate research, and practical selection guidance. It separates confirmed facts from parameters that still require direct confirmation from the full manufacturer datasheet, helping engineers evaluate the CD4010BF without confusing electrical equivalence with mechanical interchangeability.

RFQ پەیوەندی
CD4010BM - Hex Non-Inverting Buffer | Texas Instruments
CD4010BM

CD4010BM - Hex Non-Inverting Buffer | Texas Instruments

The Texas Instruments CD4010BM is a CMOS hex non-inverting buffer and converter containing six independent 1-bit buffer elements with push-pull outputs, supplied in a 16-pin SOIC package. Its rated operating temperature range is -55°C to 125°C, and the device is qualified at 5 V, 10 V, and 15 V parametric supply levels. Maximum input current is specified as 1 µA at 18 V across the full package-temperature range, with a typical value of 100 nA at 18 V and 25°C. The manufacturer also specifies 100% testing for quiescent current at 20 V. A CMOS logic buffer is an interface device that reproduces a binary input signal at its output without changing its logic polarity. In the signal-processing hierarchy, this six-channel device belongs to the CMOS logic family and the broader category of buffers and logic-level converters. The non-inverting configuration preserves high and low logic states, making the CD4010BM useful for signal buffering, distribution, and CMOS-to-TTL or DTL interface applications. The six independent channels provide flexible implementation of parallel data paths, control-signal isolation, fanout distribution, and logic conversion. Push-pull outputs are suitable for driving CMOS loads and support reliable operation at both logic levels. Operation is supported at 5 V, 10 V, and 15 V parametric ratings, while the verified 18 V input-current data indicates a maximum supply operating point of 18 V. The specified low input current helps minimize loading on the driving circuit. The CD4010B family was designed around CMOS operating principles and provides independent non-inverting channels rather than a shared multiplexed data bus. This architecture avoids the bus-sharing restrictions of multiplexers and allows every input and output to be used simultaneously. The manufacturer documentation specifically identifies the CD4010B family for use as CMOS-to-TTL or DTL logic-level converters and as CMOS high-sink-current drivers. Typical applications include buffering multiple digital control lines, translating slow or lightly loaded CMOS signals into more capable logic-driver outputs, distributing clock or gate signals, and supporting industrial or embedded systems that mix CMOS and legacy TTL or DTL interfaces. Six channels in one 16-pin package also reduce board area compared with six discrete single-channel buffers. Because the outputs are non-inverting, the part is preferable where polarity must remain unchanged. Designers should verify input and output voltage levels against the load technology rather than assuming every TTL interface is guaranteed at every supply condition. Unused input pins must not float, and unused outputs should be left unconnected unless required by a specific test configuration. The 16-pin SOIC package also requires adequate lead spacing and soldering time appropriate for a 1.27 mm-pitch surface-mount footprint. This page consolidates the verified manufacturer and distributor information, identifies the supported voltage and temperature qualifications, clarifies the limitations of drop-in replacement data, and provides practical interface-selection guidance beyond the basic catalog description.

RFQ پەیوەندی
CD4010CN - Hex Non-Inverting CMOS Buffer | onsemi
CD4010CN

CD4010CN - Hex Non-Inverting CMOS Buffer | onsemi

The onsemi CD4010CN is a monolithic six-element, non-inverting CMOS buffer with one bit per element, supplied in a 16-pin PDIP package. It operates from a single positive supply, uses complementary NMOS and PMOS enhancement-mode transistors, and provides output swings essentially equal to the supply voltage. The device is intended for logic-level buffering where multiple non-inverting outputs can isolate a source from downstream loads without changing logic polarity. A CMOS logic buffer belongs to the digital buffer and line-driver hierarchy, which sits between combinational logic ICs and interface circuits. The CD4010 family contains six independent buffer channels rather than gates with tied inputs and outputs. This arrangement allows each input to be connected directly to its corresponding output without inversion, making the device useful for fan-out, signal isolation, level-preserving distribution, and general-purpose logic interfacing. The key verified feature set includes six non-inverting elements, one bit per element, monolithic complementary MOS construction, and output operation close to the supply rails. Because each buffer provides an independent signal path, a circuit can use all six channels or leave unused inputs terminated according to the manufacturer's guidance. Its through-hole PDIP format is also appropriate for legacy industrial, control, instrumentation, and educational equipment where DIP sockets and hand or wave soldering remain common. Internally, the N-channel and P-channel enhancement-mode transistors form symmetrical CMOS stages. Complementary transistor action supports low static power in the switching state and rail-to-rail-style output behavior, although guaranteed output levels depend on the specified supply voltage and load current. The CD4010CN does not provide level translation between unrelated voltage domains by itself; its supply voltage and input thresholds must remain compatible with the source and load. Typical uses include buffering control signals between timing sections, driving multiple logic inputs from one source, isolating counter or flip-flop outputs, and preserving logic polarity in industrial control boards. The six independent stages can also support level-separated sections when the system uses one common supply. Designers should still account for input leakage, output drive current, propagation delay, fan-out, and unused-input behavior from the manufacturer datasheet. For a robust PCB layout, route each input and output directly to its corresponding pin, provide a stable supply-decoupling path near the device, and avoid long parallel traces where switching edges could couple noise between channels. Because the CDP package has long through-hole leads, observe the correct orientation and socket-pin numbering before energizing the circuit. This page combines verified product characteristics, drop-in replacement information, application guidance, and design cautions that are not presented together in the manufacturer datasheet.

RFQ پەیوەندی
CD40110BE - 4-Bit Decade Up/Down Counter | Texas Instruments
CD40110BE

CD40110BE - 4-Bit Decade Up/Down Counter | Texas Instruments

The Texas Instruments CD40110BE is a CMOS decade up/down counter with a 4-bit latch and 10 decoded display outputs, operating from a 3 V to 20 V supply in a 16-pin PDIP package. The device counts in either direction through 10 decimal states and provides separate outputs for driving the 10 segments of a common-cathode display. Its operating temperature range is -55°C to 125°C, making it suitable for industrial, instrumentation, laboratory, and legacy display systems. A decade counter is a sequential digital-logic component that produces a repeating sequence of 10 states rather than the 16 states associated with a conventional binary counter. The CD40110 belongs to the CMOS counter hierarchy: counter, sequential logic, digital logic IC, and semiconductor. Its latch decouples the counting and display outputs, allowing the displayed value to remain stable while the internal counter continues to change. The principal features include separate up/down and clock inputs, a parallel load function, a master reset, and 10 active-high segment outputs. Operation across a 3 V to 20 V supply range supports both legacy 5 V logic and higher-voltage industrial systems. The 16-pin PDIP package supports conventional through-hole assembly, prototyping, and repair of equipment designed around the CD4000 logic family. Internally, the CD40110 combines a decade counting section, an output latch, and display-driving circuitry. The latch allows a new count to be captured without repeatedly changing the visible display. Segment outputs are intended for direct connection to suitable common-cathode display segments, while the count direction is selected by the up/down control. Input transitions and reset behavior must be designed to meet the timing requirements stated in the manufacturer datasheet. Typical applications include digital frequency meters, event counters, laboratory timers, industrial panel meters, decade sequencing, and legacy multiplexed or static decimal displays. The part is especially useful where a decimal count must be displayed directly rather than decoded later by a microcontroller. For a new design, verify propagation-delay, clock-edge, load, reset, and supply-voltage requirements against the operating speed of the display and surrounding logic. Because the CD40110BE is a through-hole CMOS device, its input rise and fall times, grounding, and decoupling layout remain important even when the counter operates at low frequency. This page combines the manufacturer function description, package and temperature characteristics, sourcing guidance, compatible alternatives, and practical design considerations to support component selection, schematic review, and legacy-board maintenance.

RFQ پەیوەندی
CD40160BE - 4-Bit Synchronous Decade Counter | Texas Instruments
CD40160BE

CD40160BE - 4-Bit Synchronous Decade Counter | Texas Instruments

Texas Instruments CD40160BE is a CMOS synchronous programmable 4-bit decade counter with asynchronous clear, operating from a 3 V to 18 V supply and housed in a 16-pin PDIP package. It counts in BCD decades from 0 through 9 and provides four parallel decade-counter outputs for digital clocks, event counters, and programmable timing systems. A synchronous decade counter is a logic IC that advances all registered output bits on the active clock edge. The CD40160BE belongs to the CD4000 CMOS logic family, placing it within the hierarchy of CMOS logic IC, counter, decade counter, and digital logic IC. Unlike asynchronous ripple counters, its synchronous architecture prevents ripple-related timing uncertainty between internal count stages, making the output states more predictable for downstream decoding and control logic. The counter supports programmable decade operation through its load, count-enable, and asynchronous-clear controls. These controls allow the count sequence to be loaded, held, cleared, or advanced under external logic. The 4-bit parallel outputs expose the current BCD decade state, while the asynchronous clear input provides a direct method for resetting the count independently of the clock state. Its CMOS implementation also supports operation across a wide supply-voltage range suitable for both legacy 5 V systems and modern low-voltage digital control. The Texas Instruments product family documentation identifies CD40160B as a CMOS synchronous programmable 4-bit decade counter with asynchronous clear. The E suffix identifies the military-temperature product in a 16-pin PDIP package. According to the manufacturer family documentation, CD40160B is functionally equivalent to and pin-compatible with the 74LS160 TTL counter family, allowing designers to compare CMOS and TTL implementations when upgrading legacy equipment. Typical uses include decade-based digital clocks, sequential industrial timers, laboratory counters, pulse-counting modules, and embedded timing controllers. Because the outputs represent decimal decades rather than unrestricted binary values, the device is especially useful when the next stage must display or control a decimal count. The external load and enable inputs also permit cascading or coordinating multiple counting channels in larger equipment. For reliable operation, keep the asynchronous clear and control inputs away from noisy switching paths, and observe the manufacturer’s specified input transition limits. Confirm signal levels, clock pulse width, and supply decoupling against the CD40160B datasheet before using the counter with modern 3.3 V logic. The DIP package also requires adequate spacing and routing around the through-hole footprint on legacy-style boards. This page combines the CD40160BE function, pin-compatible TTL-counter relationship, practical implementation guidance, and qualified replacement information. It also identifies the principal design trade-offs among CMOS and TTL counter options so engineers can select a replacement without changing the 16-pin through-hole footprint.

RFQ پەیوەندی
CD40161B-MIL - CMOS Sync 4-Bit Binary Counter | Texas Instruments
CD40161B-MIL

CD40161B-MIL - CMOS Sync 4-Bit Binary Counter | Texas Instruments

The Texas Instruments CD40161B-MIL is a CMOS synchronous programmable 4-bit binary counter with asynchronous clear, supplied in a 16-lead hermetic dual-in-line ceramic package (F3A suffix) with a 3V to 18V supply range, a 5.5MHz typical maximum clock frequency at 5V, and a full military operating temperature range of -55C to +125C for high-reliability applications. A synchronous programmable counter is a digital sequential logic device that advances through a binary counting sequence on each rising clock edge while allowing any 4-bit value to be parallel-loaded via preset inputs. Within the logic IC hierarchy, counters are fundamental building blocks of the broader family of sequential logic and digital timing devices, sitting alongside shift registers and flip-flops as core building blocks for sequencing and frequency division in digital systems. Key features include fully static operation down to DC, standardized symmetrical output characteristics meeting JEDEC Tentative Standard No. 13B for B-series CMOS devices, and a fanout of 1 LSTTL load for direct interfacing with other logic families. The asynchronous clear resets all outputs to zero immediately regardless of clock state, and the ripple carry output enables straightforward cascading of multiple stages into wider counters. Technically, the CD40161B uses CMOS technology with buffered outputs and input protection diodes to VDD and VSS, providing low static power consumption and high noise immunity typical of the CD4000B series. Typical propagation delay is 160ns at 5V, and the device is functionally equivalent to and pin-compatible with the TTL 74LS161 counter. Typical applications include frequency dividers, programmable binary counting, counter control/timers, event counters, and state machines in industrial control, test equipment, and aerospace electronics where hermetic packaging and the military temperature range are mandatory. A key design consideration: tie the asynchronous clear input to VDD when unused to prevent spurious resets, and provide clean clock edges to avoid double counting. This page synthesizes verified datasheet parameters, drop-in family alternatives, pricing tiers, and practical design notes not consolidated in the manufacturer datasheet.

RFQ پەیوەندی
CD40161BE - 4-Bit CMOS Binary Counter | Texas Instruments
CD40161BE

CD40161BE - 4-Bit CMOS Binary Counter | Texas Instruments

Texas Instruments CD40161BE is a 4-bit CMOS synchronous programmable binary counter with asynchronous clear, positive-edge clocking, and a 16-pin PDIP package. The device provides one 4-bit counting stage with parallel load and enable controls, making it suitable for digital counting, timing, sequencing, and industrial control logic. Its counter width is 4 bits, while the negative-edge-triggered asynchronous clear immediately resets the count when the active control is asserted. A CMOS binary counter is a clocked sequential-logic device that advances a 4-bit numerical count on each selected clock transition. The CD40161BE belongs to the CD4000 CMOS logic family, which sits within the broader hierarchy of counters, digital logic ICs, and semiconductors. Its synchronous architecture keeps counter-state outputs coordinated with the clock, supporting repeatable digital sequencing and count-state decoding. Principal features include a 4-bit binary count capacity, positive-edge counting, parallel loading, an enable input, and asynchronous clear. The 16-pin PDIP package supports conventional through-hole PCB assembly and is convenient for laboratory, industrial-control, educational, and legacy-system designs. The manufacturer identifies the CD40161B family as functionally equivalent and pin-compatible with the 74LS160 through 74LS163 TTL counter series. The CD40161BE is one element of the CD40160B through CD40163B family of 4-bit synchronous programmable counters. Those devices provide related counting functions while maintaining a common CD4000-series implementation approach. Because the clear operation is asynchronous, the output state can be reset without waiting for a clock edge. This is useful in reset-dominant control logic, batch-counting systems, and safety interlocks where immediate clearing is more important than preserving synchronous timing. Typical uses include frequency division, event counting, programmable sequence generation, digital timing, address-stepping logic, and small industrial control systems. The device can also serve as a building block for four-bit arithmetic, sampling, and state-machine functions. Designers should connect unused inputs to a defined logic level and should account for the CD4000-family supply and input limits when interfacing with modern microcontrollers or 5 V TTL systems. For reliable operation, follow the manufacturer datasheet for supply-voltage limits, input levels, clock timing, and output-current restrictions. Decoupling close to the supply pins is recommended to limit inductive and capacitive switching noise. Because this is a through-hole PDIP device, consider socket availability, insertion cleanliness, and assembly tooling when planning production or field replacement. This product page combines the functional description, package information, comparison criteria, drop-in replacement guidance, and practical circuit-planning considerations in one engineering-focused reference. It is intended to help engineers identify the correct counter function, confirm board compatibility, and plan supply, clock, reset, and output-interface details before schematic release.

RFQ پەیوەندی
CD40163BD - 4-Bit Binary Counter, 12 MHz, 16-CDIP | Harris
CD40163BD

CD40163BD - 4-Bit Binary Counter, 12 MHz, 16-CDIP | Harris

The Harris Corporation CD40163BD is a 4-bit synchronous binary counter IC in a 16-CDIP package. It operates from 3 V to 18 V, uses positive-edge clock transitions, and supports operation to 12 MHz. The counter provides one counting element and belongs to the CD4000 CMOS logic family, where it functions as a programmable digital counter suitable for digital timing, sequencing, and control circuits. A CMOS binary counter is a digital logic device that increments or decrements a four-bit count on command. Clocked inputs determine when the internal state changes, while control inputs can determine whether the device counts, loads a preset value, holds its current state, or resets the count. The CD40163BD therefore sits within the hierarchy of counter ICs, digital logic ICs, and general-purpose semiconductor devices. The principal operating characteristics are a 3 V to 18 V supply range, a maximum listed operating frequency of 12 MHz, positive-edge counting, and a 4-bit counting element. Its 16-CDIP construction provides a through-hole package suitable for industrial, control, and legacy electronic assemblies. The component is also identified as RoHS-compliant in the manufacturer-related catalog information. CD40163 counters are designed for synchronous operation, allowing multiple counter sections to share a common clock and update in a coordinated manner. This characteristic is useful when a system divides a master clock into several related binary count phases. The CD40160B through CD40163B family is described as pin-compatible with the corresponding 74LS160 through 74LS163 counter series, providing useful context for legacy system upgrades. Typical uses include digital timing generation, frequency division, event sequencing, programmable pulse and timing systems, industrial counters, and control logic that requires repeatable four-bit binary states. The 3 V to 18 V operating range also permits operation across common supply arrangements found in legacy CMOS equipment, although each system must maintain valid input levels for its supply voltage. The primary design consideration is preserving the counter's synchronous control behavior and avoiding invalid clock and control-input combinations. PCB design should provide adequate supply bypassing and clean clock routing because propagation delays affect how closely multiple counters can update. The 16-CDIP footprint requires through-hole placement, making mechanical compatibility more important than package miniaturization for new compact designs. This product record combines the exact CD40163BD ordering information, electrical and package attributes, related-family guidance, source links, and application-focused engineering context to support component identification, legacy maintenance, and board-level design decisions.

RFQ پەیوەندی
CD4017AD - 5MHz CMOS Decade Counter | Harris Corporation
CD4017AD

CD4017AD - 5MHz CMOS Decade Counter | Harris Corporation

Harris Corporation CD4017AD is a CMOS decade counter and divider rated for a 3 V to 12 V supply, operation up to 5 MHz, and an ambient temperature range of -55°C to +125°C. The device is supplied in a 16-pin ceramic dual-inline package and supports rising-edge counting, synchronous counting, reset control, static operation, and divide-by-10 counting functions. A CMOS decade counter is a sequential logic device that advances through ten count states on each clock cycle and provides one decoded output for every state. This makes the CD4017AD useful for translating a clock into a repeating ten-step sequence without requiring a microcontroller, decoder IC, or software. In the broader semiconductor hierarchy, it belongs to the CMOS logic family and the counter/divider category of integrated circuits. The primary operating characteristics are a 3 V to 12 V supply range, a maximum count frequency of 5 MHz, and a listed power dissipation of 500 mW. Its rising-edge clock input makes each clock transition advance the counter, while the reset function establishes a known starting state. The -55°C to +125°C temperature range supports industrial and extended-temperature equipment where reliable operation is required across a broad ambient range. The CD4017AD combines a binary counting section with decoded decade outputs. Each decoded output can serve as a separate timing or sequencing signal, and the carry output allows additional counting stages to be cascaded when more than ten states are required. Because it is implemented with CMOS logic, the device is suitable for low-voltage digital systems that need deterministic decade sequencing, although timing margins should be checked against the clock source and supply voltage. Typical uses include ten-step LED sequencing, industrial relay-cycle controllers, timing dividers, automotive lamp-cycle logic, digital test systems, and clocked sequence generators. The 5 MHz count capability provides ample margin for many low-frequency sequencing tasks while also supporting faster timing applications when propagation delay and output-rise requirements are satisfied. For reliable implementation, use a clean clock signal with rise and fall times compatible with CMOS inputs, place decoupling capacitors close to the supply pins, and connect unused inputs to a defined logic level. Account for the difference between the 12 V maximum supply rating and the 5 MHz operating point, because maximum clock frequency normally decreases as supply voltage falls. This page combines the CD4017AD operating specifications, pin-compatible alternatives, application guidance, and design notes to support component selection and PCB implementation. It also distinguishes the ceramic CDIP-16 CD4017AD from parts that provide similar counter functions but use a different package or pin assignment.

RFQ پەیوەندی
CD4017AF/3 - 10-Bit CMOS Decade Counter | Harris
CD4017AF/3

CD4017AF/3 - 10-Bit CMOS Decade Counter | Harris

The Harris Corporation CD4017AF/3 is a CMOS decade counter and divider with one counting element, 10 decoded outputs, positive and negative edge triggering, and a 16-CDIP package. It is designed for sequential counting, frequency division, timing, and control functions in low-power digital systems. The 10 decoded outputs allow one of ten sequential states to be selected by the counter, while the separate clock and reset inputs support repeatable event sequencing. A CMOS decade counter belongs to the CD4000 logic family, which provides low-power digital operation for clocking, sequencing, and state-control applications. Its hierarchy is CD4017 counter, decade counter and divider, logic IC, digital semiconductor, and integrated circuit. Unlike a binary counter that presents only a binary code, the CD4017AF/3 provides one active decoded output for each of ten count states, simplifying designs that directly drive stepper-related sequencing or multi-position timing controls. The CD4017AF/3 provides 10 decoded outputs, positive and negative edge operation, and one counter element. Its 16-CDIP construction supports through-hole assembly and maintenance applications. The part is identified as an industrial-grade CMOS logic device and is categorized under EAR99 export-control classification. The bulk packaging form and MSL Level 3 rating, equivalent to a 168-hour floor-life limit, define its handling constraints when the package has been exposed to the environment. Operationally, the counter advances when its clock input receives an applicable edge, and the decoded outputs follow the decade sequence. The reset function returns the device to a defined starting state so each operating cycle begins consistently. Because it combines counting with decoded outputs, the device can divide an incoming frequency into ten sequential phases without requiring a separate binary decoder. Practical circuit design still requires correct clock-edge selection, reset timing, and suitable handling of unused inputs. Typical uses include industrial timing and sequencing, pulse-position generation, frequency division, control-panel step selection, low-power digital logic, and test or measurement systems that need ten discrete timing phases. The 10-output architecture is especially useful when a controller must activate one stage at a time rather than interpret a multi-bit binary number. For reliable operation, connect the reset signal so it cannot float, use pull-up or pull-down components where the clock interface requires defined levels, and respect the manufacturer's recommended decoupling. Confirm the electrical limits and unused-pin states in the Harris Corporation datasheet before assigning signals or modifying an existing PCB. This page combines functional identification, package and lifecycle guidance, verified drop-in alternatives, comparison fields, and practical implementation notes. It helps engineers evaluate the CD4017AF/3 as a legacy-compatible decade counter while identifying which circuit functions, voltage details, and package-specific constraints still require confirmation from the manufacturer datasheet.

RFQ پەیوەندی
CD4017AK - 3-12V Decade Counter | Texas Instruments
CD4017AK

CD4017AK - 3-12V Decade Counter | Texas Instruments

Texas Instruments CD4017AK is a 3 V to 12 V CMOS decade counter and divider with ten decoded outputs in a 16-CFP surface-mount package. It counts clock pulses in the 0-to-9 sequence and provides one active-high decade output for each count. The device also supports cascade operation, carry output, clock inhibit, and a master reset for arranging multi-digit counters or programmable sequencers. A decade counter is a sequential digital logic circuit that cycles through ten stable states before repeating. A CMOS decade counter belongs to the logic IC and counter-divider hierarchy, combining flip-flop and decoding logic in one integrated device. It is useful when a system must divide a repetitive input frequency, distribute timing phases, or step through a fixed sequence without requiring a programmable processor. The CD4017AK accepts a supply voltage from 3 V to 12 V, allowing operation from common low-voltage rails. Its ten decoded outputs provide a one-hot indication of the current count, while the carry output supports extension into additional decades. Clock inhibit provides a way to pause counting, and the master reset input provides a deterministic starting state. These control functions make the counter useful beyond simple frequency division. Internally, the counter advances on the falling clock edge identified in the CD4017 family documentation. The output decoder turns the counter state into ten separate active-high signals. Because the decoded output remains associated with one count state at a time, a design can drive indicator lamps, multiplexed displays, sequencing controls, or discrete logic gates without decoding the internal state externally. Cascade and reset timing should be checked against the slowest propagation path in the intended system. Typical applications include decade frequency dividers, stepper-motor position sequencing, timing-pattern generators, display-multiplexing counters, programmable timers, and small automation or test systems. Multiple CD4017AK devices can be chained so that one counter advances another when the first completes a ten-step sequence. Cascading is especially useful when more than ten distinct time slots or decimal positions are required. When laying out the circuit, keep the clock and reset paths away from sensitive analog nodes and use a defined reset strategy for power-up. Unused decade outputs should not be left driving loads that could create unnecessary switching activity. The 16-CFP package also requires inspection of land-pattern dimensions and solderability requirements before a surface-mount assembly is released. This page combines the verified component identity, package information, price-evidence status, replacement guidance, and practical counter-design considerations into one engineering reference. It also distinguishes documented drop-in options from broader CD4000-family alternatives so that footprint and electrical compatibility are reviewed before design substitution.

RFQ پەیوەندی
CD4017BCM - 10-Bit Decade Counter | onsemi | Logic IC
CD4017BCM

CD4017BCM - 10-Bit Decade Counter | onsemi | Logic IC

onsemi CD4017BCM is a CD4000-series CMOS decade counter and divider with ten decoded outputs, packaged in a 16-pin SOIC. It accepts clock pulses and activates one of ten output stages per count, making it suitable for sequencing, stepper-motor control, timing, and display multiplexing. The device operates across 3.3 V, 5 V, 9 V, and 12 V supply rails, with a maximum supply voltage of 15 V. Its specified temperature range extends from -55 °C to +125 °C. A decade counter is a logic IC that divides an incoming clock frequency by ten and converts the count into ten mutually decoded states. The CD4017BCM belongs to the broader hierarchy of CMOS counter logic, alongside binary counters and programmable counters. Its ten decoded outputs reduce the external decoding circuitry normally required in sequential lighting, relay-control, and industrial timing systems. Key operating features include positive-edge clock triggering, ten decoded outputs, and a five-bit counter architecture. The manufacturer description identifies the device as a one-element, 10-bit counter supporting positive and negative logic conventions. Reported propagation-delay figures include 1000 ns, 400 ns, and 320 ns, allowing clock-rate planning to account for the counter's response time. Its 16-pin SOIC package supports compact surface-mount assembly while providing separate access to the decade outputs. The CD4017BCM's decoded architecture is particularly useful when a design requires ten discrete sequential states rather than a binary count. A resistor network or diode steering arrangement can connect the decoded outputs to a common load, while the carry output can trigger an additional divider stage. Because the device is a CMOS counter, input transitions and unused inputs still require appropriate handling to prevent unintended current flow or indeterminate states. Typical applications include ten-step relay sequencing, LED chasers, stepper-motor position stepping, sound-generation patterns, frequency division, and industrial control panels. The device is especially useful when a microcontroller is unavailable or when a simple hardware sequence is more reliable than software timing. In such systems, the clock source determines the repetition rate and the output stages determine which load is active. Designers should account for supply decoupling, clock rise and fall times, reset timing, and propagation delay in the maximum operating frequency calculation. Unused CMOS inputs must be tied to a defined logic level, normally ground or the active supply rail. A stable reset pulse should be applied during power-up if deterministic starting state is required. The 15 V maximum supply must never be exceeded. This product page combines device identification, lifecycle-oriented sourcing information, drop-in cross-reference analysis, pin-package context, and practical implementation guidance for engineers evaluating the CD4017BCM in new and existing CMOS logic designs.

RFQ پەیوەندی
CD4017BCN - 5-Stage Decade Counter | Fairchild | DIP-16
CD4017BCN

CD4017BCN - 5-Stage Decade Counter | Fairchild | DIP-16

The Fairchild CD4017BCN is a 5-stage divide-by-10 Johnson counter with 10 decoded outputs and a carry-out bit, supplied in a 16-pin PDIP package. It is designed for digital counting, sequencing, timing, and decade-step applications using CMOS logic. The verified manufacturer description identifies a wide supply voltage range of 3.0 V to 15 V. The counter advances one decade position for each active clock transition and provides one decoded output for each of the ten count states, while the carry output provides a signal at the end of the counting sequence. This makes the device useful for stepper-motor control, relay sequencing, lighting sequences, industrial timing, and digital test systems. A Johnson counter is a type of digital counter built from sequential logic stages that produce a predictable sequence of decoded outputs. The CD4017BCN belongs to the CD4000 CMOS logic family, where the product hierarchy is decade counter > counter/divider > logic IC > integrated circuit > semiconductor. Its decoded outputs reduce the need for external binary decoding logic, simplifying designs that must select one of ten sequential states. The carry-out bit can also be used to detect the transition from the ninth state to the reset state. The principal operating characteristics are the 3.0 V to 15 V supply range, 5-stage counter organization, 10 decoded outputs, carry-out function, and 16-pin PDIP package. The CD4017BCN is intended for applications where a low-voltage CMOS counter is acceptable and where a through-hole package simplifies assembly, prototyping, repair, and manual inspection. Its sequential outputs are useful for rotary stepping, automatic test sequencing, and control systems that need a one-of-ten selection rather than a complete binary bus. CD4017BCN should be selected when the design requires a decade counter with ten mutually decoded outputs. The clock, reset, and carry signals provide the basic digital control interface, while the decoded outputs can drive discrete transistors, relays, LEDs, or other load stages. Designers should account for the allowable supply voltage, clock signal timing, reset behavior, output current, and the electrical limits of any driven load. Because this is a logic counter rather than a power device, its SOA data is not applicable, and the device should be evaluated as a CMOS digital IC rather than a power semiconductor. Typical applications include stepper-motor pulse sequencing, programmable timer controllers, decade-based relay logic, LED chase and display sequencing, industrial automation interfaces, and electronic test equipment. The 10 decoded outputs are particularly helpful when a system must activate exactly one stage during each count. External driver circuitry may be required when the outputs must control motors, high-current lamps, or inductive loads rather than remain within the logic-device current limits. For PCB layout, place the clock and reset inputs so that switching transients do not couple into adjacent signal traces. Keep output loads close to their associated driver circuits and use appropriate decoupling at the power pins. When substituting components, verify that the replacement has the same 16-pin PDIP footprint, the same clock and reset pin assignments, compatible supply-voltage limits, and equivalent decoded-output timing. A mechanically similar package is not sufficient unless its electrical interface and pinout are confirmed. This page combines the verified CD4017BCN function, supply-range, package, and sourcing information with practical replacement and design guidance. It also distinguishes the useful features of the decade counter from common selection mistakes, including assuming that a decoded output can directly drive a high-current load or that any similar 16-pin counter has the same reset and clock behavior.

RFQ پەیوەندی
CD4017BD - CMOS Decade Counter | Texas Instruments | 16-Pin CDIP
CD4017BD

CD4017BD - CMOS Decade Counter | Texas Instruments | 16-Pin CDIP

The Texas Instruments CD4017BD is a CMOS decade counter and divider with ten decoded outputs, a 10-bit counting chain, positive-edge clock triggering, and operation from a 3 V to 15 V supply range. It is supplied in a hermetically sealed 16-pin CDIP ceramic package, making it suitable for industrial, instrumentation, test-equipment, and control-system designs that require reliable sequential output selection. The device provides clock inhibition, asynchronous reset, and carry output functions in one counter package. A decade counter is a digital counter that cycles through ten states, from zero through nine, before repeating. The CD4017BD implements this behavior with ten mutually decoded outputs, Q0 through Q9. Each output becomes active for one clock interval, allowing a clocked system to activate LEDs, relays, stepper-motor phases, multiplexed displays, or sequential test points. In the larger IC hierarchy, it belongs to the CMOS logic family, specifically the counters and dividers class. The primary features are the ten decoded outputs, 10-bit internal counting sequence, positive-edge-triggered clock input, clock inhibition, asynchronous reset, and carry output. The carry output becomes active when the counter transitions from state nine to state zero, allowing multiple CD4017BD devices to form a longer counting or stepping system. The CMOS architecture supports low-power operation and broad supply-voltage flexibility for systems operating from conventional 5 V rails or higher-voltage industrial control supplies. The CD4017BD uses a clocked state sequence in which the decoded outputs follow the applied clock transitions. Clock inhibition provides a synchronous control function for holding the current count when required, while the reset input returns the counter to the zero state. These controls allow a controller to combine counting with external sequencing, measurement, or fault-management logic without requiring additional discrete state machines. Typical applications include ten-step relay sequencing, LED chasers, industrial sequencers, test-pattern generation, cyclic function selection, and decade-based control systems. The hermetic CDIP-16 package also suits equipment where sealed construction and through-hole assembly are preferred over a surface-mount package. Designers should verify the permitted clock frequency and timing limits at the selected supply voltage in the manufacturer datasheet before driving high-frequency events. For reliable operation, use the clock and control inputs with suitable pull resistors when they can float, connect the supply and ground pins close to the device, and keep output loads within the specified limits. Decoupling capacitors should be placed near the supply pins, and unused inputs should be tied to a defined logic level rather than left floating. This page combines device specifications, drop-in alternatives, application guidance, and practical layout considerations for faster engineering selection. The CD4017BD is the version to select when a through-hole CMOS decade counter with decoded outputs and flexible supply-voltage operation is required. It is particularly useful when a design needs the classic CD4017B function in a hermetic ceramic DIP package and accepts the timing and output-drive characteristics specified for the CD4017B family.

RFQ پەیوەندی
CD4017BD/3 - 10-Stage CMOS Decade Counter | Harris Corporation
CD4017BD/3

CD4017BD/3 - 10-Stage CMOS Decade Counter | Harris Corporation

Harris Corporation CD4017BD/3 is a 10-bit CMOS decade counter with one decoded output active at a time, positive or negative clock-edge triggering, and a 16-lead ceramic dual-in-line package. It advances through 10 sequential states, provides one output per decade state, and supports cascading through its carry output. A decade counter is a sequential logic device that divides an input clock into ten discrete states. The CD4017BD/3 belongs to the CD4000 CMOS logic family, where CMOS describes complementary metal-oxide-semiconductor construction. Within the broader hierarchy, it is a counter IC, a logic IC, and a digital semiconductor designed for state sequencing, timing, and frequency-division applications. The principal features are 10 decoded outputs, independent positive and negative clock-edge inputs, asynchronous reset control, and a carry output for cascaded counting stages. Its counter output sequence makes it possible to drive one of ten loads in turn. The 16-CDIP package also supports conventional through-hole PCB assembly and socket-based prototyping. Operating voltage and detailed timing limits should be selected from the CD4017B manufacturer datasheet for the exact supplier grade and qualification suffix. Technically, the device accepts clock events and transfers its decoded state on each qualifying edge. The reset input provides a direct way to return the counter to its initial state, while the carry output identifies completion of a decade and can clock another stage. This architecture avoids requiring a full binary counter and decoder as separate external components. Cascading permits larger decimal sequences without redesigning the board, although each added stage contributes propagation delay and additional output states. Typical uses include stepper-motor and relay sequencing, decade-frequency dividers, timing wheels, lighting sequencers, programmable counters, industrial control panels, and digital clock or timer subsystems. It is especially useful when ten mutually exclusive outputs are required rather than a binary count bus. Because output transitions occur on clock edges, the clock source must have controlled rise and fall times to avoid false counting. Designers should observe the manufacturer's absolute maximum ratings and recommended operating conditions, including supply voltage, input rise and fall times, output drive, and temperature limits. Decoupling capacitors should be placed close to the supply pins, and the clock and reset traces should remain short to minimize coupling and false transitions. Cascaded stages should be checked for accumulated propagation delay. This page combines the manufacturer function description, package identification, engineering use cases, verified drop-in candidates, and design guidance to support component selection and board-level implementation. It also distinguishes actual CD4017B drop-in options from related counters that are not electrically or pin-for-pin interchangeable.

RFQ پەیوەندی
CD4017BE - CMOS Decade Counter/Divider, 16-PDIP | Texas Instruments
CD4017BE

CD4017BE - CMOS Decade Counter/Divider, 16-PDIP | Texas Instruments

The Texas Instruments CD4017BE is a CMOS decade counter/divider with 10 decoded outputs, packaged in a 16-pin PDIP (through-hole). It operates as a 5-stage Johnson counter with built-in output decoding, advancing one position on the positive edge of the clock input, with active-high decoded outputs Q0-Q9 and a carry-out (CO) signal for cascading. The part is specified over a wide supply range of 3 V to 18 V and supports fully static operation with no minimum clock frequency. A decade counter/divider is a sequential logic circuit that counts clock pulses from 0 to 9 and then repeats, producing one decoded output pulse per count. Each of the 10 decoded outputs goes high in sequence, which makes the CD4017 useful as a one-of-N selector, a sequencer, or a frequency divider. In the broader hierarchy it belongs to the CMOS 4000 family of logic ICs, the standard for low-power, wide-supply-range digital functions. The "BE" suffix on TI parts denotes the plastic DIP package and the standard CMOS process. Key features of the CD4017BE include fully static operation (no minimum clock), typical operation up to 10 MHz at VDD = 10 V, medium-speed performance at 5 V and 10 V parametric ratings, low quiescent current tested at 20 V, and standardized symmetrical output characteristics. The output stage can source or sink several milliamps per pin, sufficient to drive LEDs directly in hobby circuits when current-limited by a series resistor. An active-high clock enable pin and a master reset (active-high) pin provide flexible control over counting and clearing. Architecturally, the CD4017 uses a 5-bit Johnson counter feeding a one-of-10 decoder. The Johnson-counter topology eliminates the race and glitch hazards associated with asynchronous ripple counters, because each stage is clocked synchronously. The carry-out signal goes high during counts 0-4 and low during 5-9, allowing two CD4017s to be cascaded to form a 100-state counter without external gating. Typical applications include LED chasers and running-light displays, frequency division, sequential timing, keypad scanning, and event counters. The wide 3 V to 18 V supply range lets designers power it directly from a 9 V battery, a 12 V rail, or a regulated 5 V logic supply without level shifting. The decoded outputs eliminate the need for an external binary-to-decimal decoder such as the CD4028, saving board space and cost. Design considerations for the CD4017 include input signal rise/fall time (slow edges near the clock threshold can cause double-counting), proper bypassing of VDD with a 100 nF ceramic capacitor close to the supply pin, and limiting LED current to the Absolute Maximum ratings when driving displays. Inputs must be brought below 0.5*VDD for a logic low and above 0.5*VDD for a logic high for reliable operation across the supply range. This page synthesizes distributor pricing from DigiKey, Mouser, and LCSC, plus cross-reference equivalents such as MC14017BCP and HCF4017BE drawn from JEDEC-registered CMOS 4000-series second sources - information not consolidated on the manufacturer datasheet alone.

RFQ پەیوەندی
CD4017BEE4 - CMOS Decade Counter/Divider, 10MHz, 16-PDIP | TI
CD4017BEE4

CD4017BEE4 - CMOS Decade Counter/Divider, 10MHz, 16-PDIP | TI

The Texas Instruments CD4017BEE4 is a CMOS decade counter/divider that sequentially activates one of ten decoded outputs on each rising clock edge, housed in a 16-pin PDIP through-hole package. It operates from a 3 V to 18 V supply, supports fully static operation with a typical clock frequency of 10 MHz at VDD = 10 V, and is 100% tested for quiescent current at 20 V. It carries 5 V, 10 V, and 15 V parametric ratings and meets all requirements of JEDEC Tentative Standard No. 13-A for CMOS logic. A decade counter is a sequential logic device that advances through ten unique states per clock cycle, then automatically resets. The CD4017 belongs to the CD4000 series of CMOS logic ICs, sitting in the broader family of logic ICs, digital ICs, and ultimately semiconductors. This counter is widely used to convert a clock pulse train into a one-of-N sequential output, eliminating the need for a decoder circuit in many designs. Key features include five Johnson-counter stages with decoded 1-of-10 active-high outputs, an active-low carry-out for cascading multiple counters, a low clock-pulse count of ten per cycle, and fully static synchronous operation. Symmetrical output characteristics ensure consistent rise and fall times, and the device includes a clock-inhibit control and a master reset for flexible timing applications. Its wide supply range (3 V to 18 V) and CMOS low power make it a versatile general-purpose sequencing element. Architecturally, the CD4017BEE4 implements five D-type flip-flops arranged as a Johnson counter with built-in decode gating that produces ten mutually-exclusive active-high outputs. Each rising edge of the clock pin increments the internal state and shifts the active-high decode to the next output in sequence. A clock inhibit input disables counting without resetting state, while the master reset asynchronously clears all outputs and returns Q0 high. Typical applications include LED sequencer chasers, frequency division (divide-by-N), keyboard encoders, and decade counting displays. Its 10 MHz typical clock and 18 V rating also suit industrial control timing, hobby electronics, and educational digital logic training. When designing with the CD4017BEE4, place a 0.1 µF decoupling capacitor close to the VDD pin and a 1 µF to 10 µF bulk capacitor on the supply rail. Tie unused active-high outputs either to known states or through resistors, and observe the clock-inhibit setup time before re-enabling counting to avoid spurious counts. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
CD4017BF - 3-18V CMOS Decade Counter | TI | Sequencer
CD4017BF

CD4017BF - 3-18V CMOS Decade Counter | TI | Sequencer

Texas Instruments CD4017BF is a CMOS decade counter with 10 decoded outputs, a 3 V to 18 V operating supply range, and a 16-pin through-hole package. It counts clock pulses in a repeating sequence from 0 through 9, making the device suitable for stepper-motor sequencing, LED chasers, timing dividers, and digital state-selection circuits. The ten decoded outputs provide one active state at a time for straightforward control of external loads. A CMOS decade counter is a synchronous logic device that advances through a fixed number of states when triggered by an external clock. The CD4017 family combines an internal flip-flop and counter stages with ten decoded output lines. This places it in the logic IC, counter, divider, and sequencing-device hierarchy, where it bridges basic timing control and discrete state activation without requiring a microcontroller for simple ten-step sequences. The CD4017BF provides three principal characteristics: a 3 V to 18 V supply range, ten decoded outputs, and a 16-pin PDIP package. Its broad supply range supports integration into legacy CMOS logic systems operating across multiple logic voltages. The decoded outputs can drive indicator stages, relays, transistors, or other circuit blocks when correctly interfaced, while the reset and clock-inhibit inputs provide basic sequence control. Internally, the device uses the CD4000 CMOS logic family and counts upward. A rising clock edge advances the counter state, while the decoded outputs indicate the current count. The separate clock and clock-inhibit inputs allow an external signal to pause or inhibit progression, and the reset input returns the sequence to its initial state. Designers should account for propagation delay and supply-level timing when cascading counters or synchronizing outputs with other logic. Typical uses include ten-step relay sequencing, bidirectional LED animation, programmable pulse-counting modules, divide-by-ten clock generation, and basic industrial control panels. In motor-control applications, decoded outputs can select winding drive stages or external switching elements. In indicator circuits, only the output corresponding to the active count is asserted, reducing the control logic required for a repeating visual pattern. Design the clock source to provide clean, repeatable edges and respect the device’s absolute-maximum ratings. Use pull-up or pull-down resistors where an input may float, and ensure that reset and clock-inhibit signals cannot contend with external drivers. Decoupling capacitors should be placed close to the supply pins, while high-current loads should be driven through suitable transistors rather than loading the counter outputs directly. This product page combines the TI product description, package information, decoded-counter functionality, practical design guidance, sourcing-oriented commercial answers, and clearly qualified replacement analysis. It is intended to help engineers confirm the CD4017BF fit, inspect its 16-pin connectivity, and decide whether a verified same-footprint alternative is appropriate for an existing PCB.

RFQ پەیوەندی
CD4017BK - 10-Output CMOS Decade Counter | Texas Instruments
CD4017BK

CD4017BK - 10-Output CMOS Decade Counter | Texas Instruments

The Texas Instruments CD4017BK is a CMOS decade counter with one decoded output for each of ten count states, a 3 V to 18 V operating range, and operation up to 11 MHz in a 16-lead ceramic flat package designated CFP-16. The counter accepts a clock signal, provides a clock-inhibit control, and includes a reset input for initializing the decoded sequence. A decade counter is a synchronous sequential digital circuit that advances through ten states before repeating. The CD4017B family belongs to the CMOS 4000-series logic hierarchy, combining decade counter, counter/divider, and decoded-output functions in one integrated circuit. Its ten mutually exclusive outputs make it useful for implementing cyclic step sequences, frequency division, programmable timing, and sequential control without requiring a separate output decoder. The key operating features include a supply-voltage range of 3 V to 18 V, a nominal 5 V operating point, and a maximum clock frequency of 11 MHz. The listed propagation delay is 650 ns, while the minimum maximum-frequency figure is 5.5 MHz. The clock input uses Schmitt-trigger action, which improves noise immunity and permits slower clock edges than a conventional logic input. A clock-inhibit input provides a second means of controlling count progression, and the reset input returns the internal count to the zero state. Internally, the CD4017B is a five-stage Johnson counter followed by decoding circuitry that produces ten individual outputs. Only one decoded output is active for a given count state, allowing the outputs to control a sequence of ten steps. The clock-inhibit and reset functions give the circuit useful control behavior for counters, dividers, stepper-motor sequencers, and cyclic controllers, while the Schmitt-trigger clock input helps prevent false counting on slow or noisy transitions. Typical applications include decade frequency dividers, ten-step relay or lamp sequences, timing generators, industrial step sequencing, pulse-position indicators, and embedded control systems that require one-hot decoded states. In a divide-by-ten arrangement, the tenth decoded output can feed the clock input to produce an integer division of the input frequency. In a sequencer, the ten outputs can be connected to relays, lamps, or discrete control stages to create repeating operating steps. The principal design consideration is the relationship between clock frequency, supply voltage, and propagation delay. Timing calculations should include the 650 ns propagation-delay figure and the specified operating-frequency limits instead of assuming ideal zero-delay transitions. The reset and clock-inhibit inputs should be driven with clean logic levels, and unused inputs must remain in a defined state to prevent unintended count advancement. This page combines the device function, electrical limits, pin assignments, practical application guidance, and verified manufacturer links. It also distinguishes the CFP-16 CD4017BK from CD4017B versions offered in other package technologies, helping engineers confirm footprint and qualification requirements before beginning a PCB or replacement design.

RFQ پەیوەندی