Logic ICs
بەرهەمەکان (720+)
CD4017BK3 - CMOS Decade Counter, 16-CFP | Harris Corporation
The Harris Corporation CD4017BK3 is a CMOS decade counter and divider with one decade counter element, a 10-bit positive/negative output arrangement, and a 16-lead ceramic flat package. It is designed for sequential counting applications where ten decoded outputs advance with the clock. The verified product data identifies the device as a counter IC, decade counter, and divider in the 16-CFP package. A decade counter is a synchronous sequential logic component that divides an input clock frequency by ten and produces one of ten decoded outputs during each count state. The CD4017BK3 is therefore placed within the hierarchy of logic ICs, counters, and dividers, where it bridges clocked digital control and simple output sequencing. Its ten outputs can represent successive steps in a timing sequence, while the carry output supports extension when more count positions are required. The CD4017BK3 is identified as a CD4000B-family CMOS device with a supply range of 3V to 18V and an operating temperature range of -55°C to +125°C. The wide supply-voltage range supports both low-voltage CMOS systems and conventional higher-voltage CMOS logic environments. The device is listed as a positive, negative, 10-bit decade counter, making it useful where a clock must be converted into a repeating sequence of ten states. The principal applications include LED chasers, stepper-motor position sequencing, programmable timers, frequency division, digital sequencing, and general-purpose control logic. In each case, the clock input determines the progression rate, while the decoded outputs identify the current count state. The carry output can extend the effective count range when cascaded with another counter. The 16-CFP package is intended for surface-mount assembly. PCB layout should preserve short clock and reset paths, provide adequate grounding, and account for the supply and decoupling requirements of the CD4000B logic family. Because the CD4017BK3 is a legacy CMOS counter, the complete electrical limits and timing characteristics should be checked in the manufacturer datasheet before applying it to a new high-speed design. This page organizes the verified Harris Corporation product information, package identity, operating limits, cross-reference findings, application guidance, and engineering comparison points. The data also distinguishes the exact CD4017BK3 ordering code from related CD4017 and CD4017BK variants so engineers can evaluate replacement requirements without confusing a related family member with a confirmed drop-in substitute.
CD4017BM - 10MHz CMOS Decade Counter | Texas Instruments
The Texas Instruments CD4017BM is a CMOS decade counter with ten decoded outputs, a typical operating frequency of 10 MHz at 10 V peak-to-peak, and a 16-pin SOIC package. The device advances one count on each positive clock transition when the clock-inhibit input is low, making it suitable for sequential control, timing, stepper-motor control, lighting sequences, and digital state machines. Its clock input uses Schmitt-trigger action to improve pulse shaping and accommodate slow input rise and fall times. A decade counter is a sequential digital logic device that cycles through ten states. The CD4017BM combines a counter stage with ten individually decoded outputs, allowing one output to become active for each count state. In the broader semiconductor hierarchy, it belongs to the CD4000 CMOS logic family and functions as a counter and divider within general-purpose logic ICs. Its decoded outputs reduce the need for external binary decoding, simplifying many sequential-control designs. The CD4017BM operates from the CD4000B series supply range identified in the manufacturer documentation for 5 V, 10 V, and 15 V parametric ratings. Its 10 MHz typical operating frequency is specified at 10 V peak-to-peak, so a power supply at or near 10 V provides the highest stated operating point in the available technical information. The counter also features standardized, symmetrical output characteristics and is tested for quiescent current at 20 V. The Schmitt-trigger clock input helps reject slow transitions and electrical noise, while the separate clock-inhibit and reset inputs provide flexible control over counting. The ten decoded outputs support cyclic activation of one load at a time. Reset returns the counting sequence to its defined initial state, while clock inhibit allows the count to be held without disconnecting the clock source. These characteristics are useful in industrial controls, test fixtures, indicators, and embedded sequencing systems. The part is suited to designs requiring more than ten count positions, particularly when individual decoded outputs are preferable to binary-coded outputs. It can implement decade sequencing, programmable timing references, step-counting mechanisms, and rotating indicators. Designers should account for unused outputs, supply decoupling, input pulse timing, and the propagation delays between clock transitions and decoded output changes when constructing reliable control circuits. A key implementation consideration is that the operating frequency and output timing depend on supply voltage. The 10 MHz figure is a typical condition at 10 V peak-to-peak rather than a guarantee at every supply voltage. Confirm timing margins against the slowest valid supply and verify reset or inhibit behavior before using multiple decoded outputs to control safety-critical loads. This product page combines the manufacturer-device identity, package information, functional characteristics, practical application guidance, verified source links, and same-footprint replacement information to support faster engineering evaluation and sourcing decisions.
CD4017BPW - 10MHz CMOS Decade Counter | Texas Instruments
Texas Instruments CD4017BPW is a fully static CMOS decade counter and divider with ten decoded outputs, operating at up to 10 MHz typical at a 10 V supply. The device is packaged in a 16-pin TSSOP (PW) surface-mount package and is intended for counters, frequency division, sequencing, and decade-step control. A decade counter is a digital logic component that advances through ten stable states. The CD4017 family belongs to the CMOS counter-and-divider category, which falls within logic ICs and digital semiconductors. Each clock pulse advances the internal state, while one of ten decade outputs becomes active at a time. This output arrangement converts a repetitive clock signal into a one-of-ten sequence without requiring a microcontroller. The principal features include fully static operation, symmetrical decade outputs, and manufacturer testing of quiescent current at 20 V. The device is characterized at 5 V, 10 V, and 15 V supply levels and is designed around JEDEC-compatible CMOS operating requirements. Its medium-speed operation reaches 10 MHz typically when the supply is 10 V. The decoded outputs provide a straightforward way to drive indicators, relays, stepper-related circuits, or sequential control stages. The CD4017BPW includes an asynchronous clear input for resetting the counter and a carry output for detecting the transition beyond the ninth counted state. The carry output can support cascaded counting or divide-by-ten behavior. Because it is a static CMOS counter, the output remains stable while the clock input is held, making the device suitable for low-duty-cycle control and instrumentation applications as well as continuous counters. Typical uses include LED light chasers, decade sequencing, event counters, clock dividers, industrial timing modules, educational digital-logic projects, and control systems that require ten discrete steps. A microcontroller is unnecessary when only fixed decade sequencing or frequency division is needed. In systems requiring programmable sequencing, stored lookup tables, or complex state control, a microcontroller may provide greater flexibility. PCB design should preserve the TSSOP-16 footprint and provide a clean return path to VSS. The clock and asynchronous-clear inputs require particular attention if they are driven by another digital device because excessive clock-edge or clear-pulse width can cause metastability or inconsistent counting. Bypass capacitors should be placed close to the supply pins, and unused outputs should be left unconnected unless their state must be observed or terminated. The manufacturer pin-description table should be used as the authority when assigning tracks and test points. This page combines the electrical limits, pin assignment, drop-in alternatives, comparison data, and practical implementation guidance needed to evaluate the CD4017BPW as a compact, medium-speed decade-counter solution.
CD4018AK - Presettable Divide-by-N Counter | Harris Corporation
Harris Corporation CD4018AK is a CMOS presettable divide-by-N counter with one counter element and 16 terminals in a rectangular flat-package configuration. The device supports decade-counter operation, operating temperatures from -55°C to 125°C, and is identified as a military-temperature-grade counter IC. A CMOS counter is a digital logic circuit that counts clock pulses and represents the count through binary output states. The CD4018 family belongs to the CD4000 CMOS logic family and provides programmable counting behavior, including decade-counter use when the appropriate feedback and control connections are applied. This places it within the broader hierarchy of counter logic -> digital logic IC -> CMOS logic -> semiconductor. The principal feature of the CD4018AK is its presettable counter architecture, which allows an initial count to be established and then incremented by incoming clock events. Its 16-terminal package provides access to the clock, reset, load, decade-count, and counter-output functions. The reported maximum operating temperature of 125°C and minimum operating temperature of -55°C support use across industrial and military-temperature environments where wider operating ranges are required. The CD4018AK operates from a low-voltage CMOS supply and uses the CD4000-series logic family conventions. Because it is a counter rather than a general-purpose microcontroller, it can implement frequency division, event counting, timing intervals, and sequential state generation with relatively few external components. The device is most useful when a fixed or limited counting sequence is required and programmable firmware would add unnecessary complexity. Typical applications include decade counters, frequency dividers, digital timing systems, industrial sequence control, pulse-counting modules, and test equipment. In a frequency-divider implementation, the clock signal is routed through the counter stages while appropriate output taps provide divided frequencies. In a programmable timer, the preset and reset inputs establish the starting count and trigger a known sequence of output transitions. PCB design must follow the manufacturer’s pin-description table and application examples because clock, reset, and preset functions can be sensitive to unwanted transitions. Keep clock traces short, decouple the supply close to the device, and avoid routing high-current or high-voltage switching signals near the counter inputs. The 16-pin flat package should be inspected for pin orientation and exposed-terminal details before assembly. This page combines the exact CD4018AK catalog attributes with drop-in alternatives, application guidance, package information, and design checks intended to reduce selection and integration risk. Use the manufacturer datasheet for final timing, electrical-limit, and pin-function decisions before production release.
CD4018BD3 - 5-Bit Divide-by-N CMOS Counter | Harris
The Harris Corporation CD4018BD3 is a 5-bit CMOS presettable divide-by-N counter with one counting element, positive-edge clocking, and a 16-CDIP package measuring 0.300 inch, or 7.62 mm, across. It combines a counter stage with logic that allows a programmable divide ratio and preset operation, making it useful when a fixed binary sequence, stepped timing interval, or retriggerable timing delay is required. A CMOS counter is a digital logic IC that advances its internal count when it receives a triggering edge. Divide-by-N counters extend that function by producing an output transition only after a selected number of input events. In the broader semiconductor hierarchy, the CD4018BD3 belongs to the CD4000 CMOS logic series, which sits within the logic IC and digital counter categories. Its counter structure is particularly appropriate when the required division ratio can be established with external logic rather than implemented solely as a fixed binary sequence. The key defining characteristics are the 5-bit counting capacity, positive-edge operation, programmable divide-by-N architecture, and 16-lead ceramic dual-in-line package. Positive-edge operation means the counter changes state in response to the designated transition on its clock input, which simplifies timing relationships when the part is combined with other edge-triggered CMOS logic. The 16-CDIP construction also provides a through-hole footprint suited to legacy industrial, control, and laboratory equipment. CD4018B-family devices are produced in multiple package configurations, including 16-lead hermetic ceramic dual-in-line, 16-lead plastic dual-in-line, small-outline, and thin shrink small-outline formats. Package selection therefore depends on the PCB footprint, soldering process, environmental requirements, and mechanical constraints of the target assembly. The D3 designation identifies the CD4018BD3 configuration offered in the 16-CDIP format, while the underlying CD4018B function remains a CMOS presettable divide-by-N counter. Typical uses include programmable pulse and timing generators, frequency dividers, delay counters, event-counting modules, and control logic for industrial or laboratory equipment. In these applications, the positive-edge input establishes a deterministic count boundary, while the preset and divide functions help align an output event with a chosen count interval. Cascading more than one counter stage can support additional division ranges when the system must produce a slower output from a higher-frequency clock. PCB integration requires attention to the through-hole footprint and decoupling. Place the device so that no traces pass beneath the package unless the mechanical drawing explicitly permits it, route clock and preset/reset signals away from sensitive analog or high-speed nodes, and connect the supply and ground pins according to the manufacturer pin description. Because the exact electrical limits and pin functions are not reproduced in the retrieved catalog excerpt, use the manufacturer datasheet before finalizing supply voltage, clock timing, and logic-level constraints. This page consolidates the verified package, counter configuration, sourcing references, and practical selection considerations for CD4018BD3. It also distinguishes the genuine same-footprint alternatives that can support design migration from options that may require a different footprint or package. For an exact electrical and mechanical release, verify the ordering suffix, pin assignment, and operating limits against the current manufacturer documentation before committing a production BOM.
CD4018BE - CMOS Divide-by-N Counter | Texas Instruments
The Texas Instruments CD4018BE is a CMOS presettable divide-by-N counter with one 5-bit counter element, positive-edge triggering, and a 16-PDIP package. Its documented supply-voltage range is 3 V to 18 V, with operation characterized at up to 8.5 MHz and a typical medium-speed figure of 10 MHz when VDD minus VSS is 10 V. The device also provides a maximum input current of 1 uA at 18 V. These characteristics place it within the hierarchy of counters, logic ICs, digital semiconductors, and general-purpose CMOS logic. A CMOS divide-by-N counter is a sequential digital logic device that advances its internal count on each active clock transition. The CD4018 family supports configurable counting behavior through its clock, clock-reset, set, and master-reset controls. It is useful when a system needs programmable frequency division, event-counting, timing generation, or cyclic sequencing without implementing the counter from individual gates. Its fully static operation and 100% testing for quiescent current at 20 V support predictable behavior across the documented supply range. The principal features of the CD4018BE include medium-speed operation, standardized and symmetrical output characteristics, and parametric operation at 5 V, 10 V, and 15 V. Positive-edge triggering defines when the counter state changes, while the SET and MR inputs provide the controls needed for preset and master-reset functions. Because it uses CMOS technology, the device belongs to the low-power logic family and can support both conventional low-frequency control and higher-frequency timing tasks. The 16-PDIP package provides through-hole access to all device terminals and is suitable for prototyping, educational equipment, laboratory instruments, industrial controllers, and legacy industrial-control systems. Designers should account for the relatively large footprint compared with surface-mount logic packages and should confirm signal timing at the actual VDD value, because maximum operating frequency is power-supply dependent. The 3 V to 18 V operating range also allows the counter to be used in legacy CMOS systems without an immediate conversion to modern low-voltage logic levels. Typical applications include divide-by-N frequency dividers, programmable timers, digital frequency measurement stages, sequential timing generators, phase and frequency-related signal processing, and general-purpose counter blocks in control equipment. In a frequency-divider arrangement, the counter can reduce an incoming pulse rate while the SET and MR controls establish operating states. In a microcontroller-assisted instrument, it can provide additional counting or timing resolution beyond the controller's native resources. The primary design consideration is validating the clock edge, reset timing, output behavior, and maximum transition rate at the actual supply voltage. Inputs and outputs must remain within the device's specified voltage and current limits, and unused inputs should be connected to defined logic levels rather than left floating. The DIP package also requires adequate clearance around adjacent board components and attention to lead strain during insertion or rework. This page combines the manufacturer's CD4018B technical information, documented supply and speed characteristics, verified cross-reference findings, pin-compatible replacement analysis, comparison parameters, and practical implementation guidance to support faster component selection and board-level planning.
CD4018BF - CMOS Presettable Divide-By-N Counter | Texas Instruments
The Texas Instruments CD4018BF is a CMOS presettable divide-by-N counter built from five Johnson-counter stages, with buffered Q outputs and counter preset control gating. It operates from a 3 V to 18 V supply, provides medium-speed operation with a typical operating frequency of 10 MHz at a 10 V supply, and is supplied in a 16-lead ceramic dual-in-line package identified by the F package suffix. The CD4018BF is designed for applications requiring programmable frequency division, count sequencing, and asynchronous control of a counter stage. A CMOS presettable divide-by-N counter is a logic IC that divides an input clock by a selected count value. The CD4018B family contains five Johnson-counter stages, allowing each stage to be cascaded or selected for divide-by-N operation. Its buffered outputs and preset-control logic make it useful in digital timing, pulse-counting, sequencing, and clock-generation systems. The device sits within the hierarchy of CMOS counter logic, digital logic IC, and semiconductor electronics. The main performance features include medium-speed operation, fully static operation, standardized symmetrical output characteristics, and parametric ratings at 5 V, 10 V, and 15 V. The manufacturer datasheet states that quiescent current is tested at 20 V, and the maximum input current is 1 uA at 18 V. These characteristics support operation across low-voltage and higher-voltage CMOS logic systems while providing predictable static behavior. The counter includes clock, reset, set, and five buffered Q outputs, allowing the circuit to be used as a programmable divider or as part of a cascaded counter arrangement. The counter can be preset for a specific initial state and controlled by external logic, making it appropriate for repeatable timing sequences in industrial control, laboratory equipment, instrumentation, and embedded digital systems. Typical applications include pulse-generation circuits, programmable timing modules, digital waveform dividers, stepper-control sequencing, test and measurement systems, and general-purpose industrial counter boards. When designing with the CD4018BF, pay particular attention to clock transition requirements, reset and set pulse timing, unused input states, and the maximum supply voltage of 18 V. Decoupling close to the supply pins and clean clock routing are important for reliable operation in practical CMOS logic systems. This product page synthesizes the verified manufacturer and distributor information with practical application guidance, package details, and an explicit drop-in comparison. The CD4018BF is a legacy-style 16-pin CDIP counter, so engineers should confirm availability, lifecycle status, and equivalent sourcing before committing a new design to it.
CD4018BF/3 - 10MHz CMOS Counter | Harris | Signal Processing
Harris Corporation CD4018BF/3 is a medium-speed CMOS presettable binary counter and divide-by-N circuit operating from a 5 V to 15 V supply in a 16-lead ceramic dual-in-line package. It provides a typical maximum operating frequency of 10 MHz at a 10 V supply, fully static operation, standardized symmetrical output characteristics, and 5 V, 10 V, and 15 V parametric ratings. The maximum input current is 1 µA at 18 V. A CMOS presettable counter is a sequential logic circuit within the broader digital counter, divider, and counter/diverter categories. It advances its count when driven by a clock edge and can be loaded with an initial count through its parallel data inputs. The preset capability makes the device useful when a circuit must begin counting from a selected value, while the decode outputs provide access to selected counter states. The CD4018BF/3 supports medium-speed operation and fully static operation, allowing the internal state to remain stable when no clock transition occurs. Standardized symmetrical output characteristics help simplify interfacing with other CMOS logic. Its parametric ratings at 5 V, 10 V, and 15 V permit design engineers to evaluate the same counter across several common supply levels rather than relying on one operating point. The part uses positive-rail, single-supply CMOS technology, placing it in the CD4000 logic family. Its 16-lead hermetic ceramic dual-in-line package supports conventional through-hole assembly and provides a durable environmental enclosure for industrial, instrumentation, and legacy control applications. The suffix /3 identifies the particular Harris ordering variant, while the CD4018B designation identifies the counter family. Typical uses include frequency division, event-counting, timing and delay generation, programmable sequence controllers, digital instrumentation, and industrial control logic. The divide-by-N capability is useful when a system needs a stable lower-frequency output derived from an external clock. Its preset inputs can also support modulo counting and repetitive timing sequences when the surrounding combinational logic defines the terminal count. Designers should account for supply tolerances, propagation delay, clock pulse width, reset behavior, and the settling time of the preset inputs when establishing operating-frequency limits. Input levels must remain compatible with the selected CMOS supply range, and unused inputs should be tied to a defined logic level. The manufacturer datasheet should be used for the complete terminal description and timing characteristics before assigning nets in a new layout. This product page combines the verified CD4018BF/3 identity, manufacturer-package information, operating-speed data, design guidance, and engineering-oriented comparison context. It also distinguishes the ceramic CDIP variant from lower-pin-count or surface-mount CD4018-family alternatives that cannot replace the target part without changing the printed-circuit-board footprint.
CD4018BM - 10 MHz CMOS Divide-by-N Counter | Texas Instruments
Texas Instruments CD4018BM is a 5-bit CMOS presettable divide-by-N counter with a typical operating frequency of 10 MHz at a 10 V supply in a 16-lead SOIC package. It provides buffered Q outputs, preset control, and static operation rated to 20 V. The counter belongs to the logic IC family and implements programmable frequency division, sequencing, and pulse-counting functions using CMOS logic. A CMOS presettable divide-by-N counter is a type of logic counter that uses a Johnson-counter structure to divide an input clock by a programmable integer. The CD4018B family contains five counter stages with buffered outputs. Its preset and reset controls allow a counter state to be loaded or cleared, making it useful in digital timing, sequencing, and industrial control circuits. Key features include medium-speed operation at 10 MHz typical with a 10 V supply, fully static operation, and 5 V, 10 V, and 15 V parametric ratings. The device also offers a maximum input current of 1 µA at 18 V, standardized symmetrical output characteristics, and a 16-lead surface-mount SOIC package for compact PCB layouts. Technically, the CD4018BM combines five Johnson-counter stages with counter-preset control gating. Its buffered outputs allow external logic to observe multiple count phases, while the clock, clock-enable, reset, and preset inputs support deterministic state control. Because it is a static CMOS device, its operating characteristics remain stable when the clock is inactive, which is useful in low-duty-cycle equipment. Typical applications include programmable pulse generators, industrial timers, sequence dividers, frequency dividers, digital time-base circuits, and sequential control logic. The 10 MHz typical operating speed supports moderate-frequency clock division, while the 16-lead SOIC package allows the counter to be integrated into conventional surface-mount control boards. When using the device, respect the supply-voltage limits and ensure unused inputs are connected to a defined logic level. Keep clock and control traces away from noisy switching nodes, and use decoupling close to VDD. The Q outputs should not be loaded beyond the datasheet output-current limits, particularly when driving multiple external loads. This product page combines the manufacturer datasheet characteristics with package, application, replacement, and design guidance to help engineers evaluate the CD4018BM without relying on a raw datasheet summary alone.
CD4018BMT - 8.5MHz Divide-by-N Counter | Texas Instruments
Texas Instruments CD4018BMT is a CMOS presettable divide-by-N counter capable of dividing by values from 2 through 10, with an operating frequency listed as high as 8.5 MHz. The device is offered in a 16-pin SOIC surface-mount package and uses positive-edge clock transitions. Its counter architecture supports programmable divide ratios for frequency division, event counting, and sequential timing applications where a configurable modulus is required. A divide-by-N counter is a digital logic IC that generates one output pulse for every N input-clock pulses. The CD4018BMT belongs to the CMOS counter and logic-IC hierarchy, combining a counter stage, programmable modulus control, and asynchronous preset and clock inputs. This makes it useful between a system oscillator and a slower sequential circuit, reducing a repetitive clock without requiring a programmable processor or complex divider chain. The primary device characteristics include a 5-bit programmable counter section, positive-edge operation, operation in the CD4000B logic family, and an 8.5 MHz maximum listed frequency. The 16-pin SOIC package provides a compact surface-mount footprint for industrial control, test equipment, instrumentation, and embedded digital systems. Because it is a fixed-function counter, the CD4018BMT offers simpler firmware-independent timing than a microcontroller-based divider. The CD4018BMT uses CMOS construction, which supports low static power relative to many older bipolar logic families. Its clock and control inputs are designed for normal CMOS signal levels, so system designers should verify input rise and fall times, supply voltage, and fanout against the operating conditions in the manufacturer datasheet. Decoupling close to the supply pins remains important when the counter drives clocked or switching circuitry at higher frequencies. Typical uses include frequency division in timing modules, programmable pulse-generation circuits, digital test equipment, phase and frequency counters, and clock-staging logic. It is particularly useful when the required divide ratio is known and must remain independent of firmware. The positive-edge trigger provides predictable operation in cascaded counter arrangements, although reset and preset behavior must be coordinated to avoid unwanted intermediate states. For reliable PCB implementation, place the device on a stable ground plane, route the clock away from switching-node traces, and use a dedicated local supply bypass capacitor close to the IC. Confirm that the clock source does not exceed the stated 8.5 MHz operating limit and that preset and reset inputs remain controlled during initialization. These precautions reduce false transitions and make the counter behavior repeatable. This page combines the manufacturer identification, package and frequency characteristics, qualified family alternatives, application guidance, and practical design considerations into an engineering-focused view of the CD4018BMT. It helps designers determine whether this fixed-function CMOS counter satisfies their timing, packaging, and replacement requirements.
CD4018BPW - 5-Bit Presettable Counter | Texas Instruments
The Texas Instruments CD4018BPW is a CMOS presettable divide-by-N counter IC with one 5-bit counter element, positive-edge operation, and a 16-lead thin shrink small-outline package. It operates across a 3 V to 18 V supply range, making it suitable for conventional CMOS logic systems operating from low-voltage digital rails through 15 V supplies. The PW suffix identifies the 16-TSSOP package. A CMOS presettable counter is a sequential digital logic device that counts clock transitions and can be loaded with an initial count through its parallel data inputs. A divide-by-N counter extends that function by arranging the counter stages to produce an output frequency related to the input clock frequency by a programmable division ratio. Within the digital IC hierarchy, the CD4018BPW belongs to the CMOS logic family and provides a compact implementation of counting, frequency division, timing, and programmable sequencing functions. The principal device characteristics include one 5-bit counter element, positive-edge triggering, a 3 V minimum operating supply, an 18 V maximum operating supply, and an operating temperature range of -55°C to 125°C. Its 16-TSSOP package measures approximately 4.40 mm in body width. The PW catalog variant is identified as a tube-packaged 16-TSSOP device, making it practical for prototype assembly and conventional manufacturing processes that support tube feeding. The counter architecture provides separate clock, reset, load, and data-control functions associated with the CD4018B family. These controls allow an external circuit to establish a starting value and then continue counting from that value. Because the device operates in the CMOS 4000 series, it is suited to conventional low-power digital designs where compatibility with existing 3 V to 18 V CMOS logic levels is important. Typical uses include programmable frequency dividers, clock-generation and timing circuits, event counters, periodic pulse generators, digital test equipment, and industrial control logic. In a frequency-divider circuit, the counter receives a periodic clock and generates a lower-frequency output according to its programmed divide-by-N configuration. The positive-edge trigger gives the circuit a defined sampling behavior for the incoming clock waveform. Designers should preserve the voltage-level compatibility of every connected 4000-series device and account for propagation delay when chaining counters. Reset and load signals must meet the specified input timing requirements, and unused inputs should be tied to defined logic levels. The 16-TSSOP footprint requires a PCB land pattern designed for a 0.173-inch, 4.40 mm-wide package rather than a wider SOIC body. This product page combines the manufacturer family information with distributor package details, practical application guidance, and an explicit assessment of drop-in replacement availability. The CD4018BPW is most appropriate when a programmable CMOS divide-by-N counter, broad supply-voltage range, positive-edge counting, and a compact 16-TSSOP footprint are required.
CD40192BD - 4-Bit Presettable BCD Up/Down Counter | TI
The Texas Instruments CD40192BD is a 4-bit CMOS presettable BCD up/down counter with dual clock inputs, master reset, preset enable, four jam inputs, and carry and borrow outputs. The device is packaged in a 16-pin SOIC and is designed for synchronous decade counting in digital control, timing, sequencing, and industrial logic systems. A BCD counter is a digital counter that represents each decimal digit with four binary bits. The up clock advances the count, while the down clock decrements it. Within the wider CMOS logic family, the CD40192BD belongs to the counter and divider category, combining gated D-type flip-flops with parallel jam and preset controls. Its decade organization makes it suitable when the system must directly display or represent decimal steps rather than a continuous binary sequence. The counter provides four buffered Q outputs for the BCD digit, separate CLOCK UP and CLOCK DOWN inputs, and dedicated CARRY and BORROW outputs. Four individual jam lines allow parallel loading, while PRESET ENABLE controls whether the loaded value is transferred into the counter. These features support programmable count intervals, batch-event sequencing, decade position tracking, and repeatable operation initiated by master RESET. The snippet identifies the part as a dual-clock counter with reset. Internally, four synchronously clocked, gated D-type flip-flops form the counting stage. Synchronous operation means the counter state advances on the active clock transition rather than through asynchronous ripple propagation. Buffered outputs provide a defined interface for downstream logic, while separate carry and borrow outputs indicate overflow beyond 9 and underflow below 0 in BCD operation. The manufacturer datasheet is the controlling reference for voltage limits, propagation timing, output drive, and environmental limits. Typical uses include industrial decade counters, programmable timers, sequence controllers, test-equipment counters, batch-processing controls, and digital instruments that require bidirectional counting. The four Q outputs can feed a display decoder, latch, or programmable controller, while CARRY and BORROW can be combined with other counters to extend the counting range. The dual-clock architecture also permits count-up and count-down operations to be selected independently by the surrounding control logic. When laying out a circuit, treat the clock and jam inputs as synchronous control signals and preserve the device's specified operating voltage and timing limits. Decoupling should be placed close to the supply pins, and unused inputs should be connected to a defined logic level rather than left floating. Because the D suffix denotes the surface-mount packaging option, verify the land pattern and pin orientation against the manufacturer pin description before fabrication. This product page combines the function architecture, package details, practical counter applications, design guidance, and a parameter-focused comparison framework. It also distinguishes genuinely pin-compatible options from parts with different packages, helping engineers evaluate replacements without confusing BCD, binary, or packaging changes with true drop-in interchangeability.
CD40192BE - 4-Bit BCD Up/Down Counter | Texas Instruments
The Texas Instruments CD40192BE is a CMOS presettable BCD up/down counter with a 4-bit decade counter, separate up and down clock inputs, and a master reset in a 16-pin PDIP package. It operates from 3V to 18V, supports clock frequencies up to 11 MHz, and provides four buffered Q outputs together with CARRY and BORROW outputs. A CMOS counter is a synchronous digital-logic circuit that stores a multi-bit count in flip-flop stages and advances that count in response to clock edges. The CD40192 belongs to the CMOS logic IC hierarchy, where it is a specialized decade counter rather than a general-purpose binary counter. Its BCD organization means the four output bits represent the ten states from zero through nine, making it suitable for decimal displays, decade sequencing, and programmable event counting. Each counter stage is a synchronously clocked, gated D-type flip-flop. Four individual jam inputs allow the count to be preset in parallel, while a PRESET ENABLE input controls whether those jam levels are transferred to the internal stages. Separate CLOCK UP and CLOCK DOWN inputs permit increment or decrement operation, and a master RESET input returns the counter to its zero state. Buffered Q outputs expose the four BCD count bits directly. The CD40192BE uses complementary MOS technology and operates across a 3V to 18V supply range. The 11 MHz maximum operating frequency provides ample margin for digital control, instrumentation, and pulse-counting systems. Because it operates from a single supply, the device simplifies designs that do not require split-rail logic. Its counter output logic and separate directional clocks make it easy to build bidirectional step sequences, decade dividers, and programmable timing chains. Typical uses include decimal counter and display modules, industrial sequencing controllers, frequency-divider chains, event counters, laboratory pulse-counting equipment, and embedded control systems that interface mechanical switches or sensors to digital logic. It is particularly useful when a project needs true BCD counting rather than binary counting, since binary-to-decimal conversion can be avoided in LED display applications. When designing around the CD40192BE, keep clock traces short and isolate switching or inductive sources from the counter inputs. Decoupling capacitors should be placed close to the supply pins, and unused input pins must be tied to a defined logic level. Confirm that the required count direction and preset behavior match the intended jam and preset-enable logic before laying out the circuit. This page combines manufacturer specifications, verified distributor listings, pin-level implementation guidance, and function-level comparisons with available 16-pin CMOS counter alternatives. It also identifies where the CD40192BE should not be selected, such as designs that require binary counting or a surface-mount footprint.
CD40193BD - 4-Bit Dual-Clock Counter | Texas Instruments
The Texas Instruments CD40193BD is a CMOS presettable 4-bit binary up/down counter with separate increment and decrement clocks, reset control, and positive-edge counting in a 16-pin CDIP package. The device operates synchronously, supports bidirectional counting, and has a stated propagation delay of 500 ns. Its military temperature grade and 5.08 mm seated height suit industrial, control, instrumentation, and legacy digital-system designs. A binary up/down counter is a sequential logic device that increments or decrements a 4-bit binary value according to the active clock input. The CD40193BD adds preset and reset controls, allowing the counter state to be loaded or cleared independently of its counting inputs. This places it within the CMOS logic IC hierarchy: counter > sequential logic > digital logic > integrated circuit. Unlike a mechanical counter, it provides electronic state storage, programmable count direction, and direct interface logic levels. The principal functional characteristics are 4-bit counting capacity, dual-clock up/down operation, positive-edge triggering, a 16-pin through-hole CDIP package, and a 500 ns propagation delay. These parameters make the part useful where a compact bidirectional event counter must respond deterministically to separate increment and decrement commands. Preset capability also supports repeatable sequence generation, decade-oriented control functions, and position tracking without additional external state registers. The counter operates from a single power rail and uses CMOS logic inputs. Its synchronous operation means that the counter state changes on the active clock edge, helping avoid asynchronous data races in sequential control systems. The 500 ns propagation-delay figure is the principal timing constraint when determining the maximum clock rate or the required settling interval before sampling the four output bits. Typical applications include industrial counters, stepper-motor position accumulators, frequency-divider and sequencing logic, test and measurement systems, and legacy control equipment. It can also implement pulse-domain position tracking when increment pulses represent forward motion and decrement pulses represent reverse motion. In such systems, the preset input initializes a known reference position, while the reset input establishes a clear starting condition. Designers should route each clock only to the intended count-direction input and account for the 500 ns propagation delay when sampling outputs. Decoupling close to the power pins helps control supply noise, while unused inputs must be tied to a defined logic level. Because the part is packaged as a 16-pin CDIP rather than a surface-mount device, board layout must preserve through-hole footprint clearance and adequate spacing for insertion and soldering. This product overview combines the manufacturer description, distributor device attributes, package details, timing information, and cross-reference findings into an engineering-focused guide. It also identifies design constraints and package-specific information that help engineers assess CD40193BD suitability before integrating it into a new PCB or replacing an existing counter.
CD40193BE - 4-Bit Presettable Up/Down Counter | Texas Instruments
Texas Instruments CD40193BE is a CMOS presettable 4-bit binary up/down counter with one 4-bit counter element, dual clock inputs, and positive-edge operation, supplied in a 16-pin PDIP package. The device supports count-up and count-down sequencing, parallel preset loading, and asynchronous reset control, making it suitable for digital timing, sequencing, and arithmetic-control systems. A presettable counter is a sequential logic device that stores a multibit value and advances that value on command. The CD40193 belongs to the CMOS counter hierarchy, within binary counters, digital counters, logic ICs, and semiconductors. Unlike a basic ripple counter, it combines independent up and down clock inputs with preset and reset functions, allowing a circuit to start from an arbitrary initial state and then count in either direction. Key functional characteristics include four synchronously clocked D-type flip-flops, one 4-bit output, a binary counting sequence, separate increment and decrement clocks, and 16-PDIP packaging. The dual-clock architecture permits a control system to select the counting direction without reversing every output bit. The parallel preset inputs support loading an initial count, while reset provides a defined starting condition. These features are useful when a design needs flexible sequencing rather than a fixed divide-by-N counter. The dual-clock architecture is particularly useful in programmable sequencers, industrial control equipment, test systems, and embedded automation logic. The direction can be selected by routing events to the up or down clock, while the preset function can establish a new terminal count. A classic 4013-style flip-flop may be useful when separate set and reset functions are needed, but the CD40193 combines those operations into one dedicated counter IC and reduces the number of logic packages required for a four-bit sequencing function. CD40193BE is also appropriate for laboratory timing circuits, digital function generators, batch counters, and educational digital-logic systems. Its 16-pin PDIP format is convenient for prototyping and through-hole assembly. The operating voltage, temperature range, clock-transition limits, and propagation-delay figures should be checked against the manufacturer datasheet before using the device where timing margins are critical or where the supply voltage differs from the nominal logic family requirement. For reliable implementation, observe the maximum supply voltage and input transition-time limits, and provide adequate logic-level rise and fall times. Because this is a clocked sequential device, clock pulse width and recovery behavior determine whether multiple commands are recognized correctly. Decoupling close to the power pins, clean grounding, and short clock traces are especially important when the counter drives nearby digital control lines. Avoid long unprotected clock routes that can pick up switching noise and cause an unintended count operation. This product page combines the manufacturer identification, verified distributor listings, pin-level implementation guidance, application examples, and drop-in replacement information. It is designed to help engineers confirm package compatibility, plan logic integration, and compare genuine alternatives without confusing a functionally similar counter with a pin-compatible replacement.
CD4020AF3 - 14-Bit CMOS Binary Counter | Harris | DIP-16
The Harris Corporation CD4020AF3 is a CD4000-series CMOS ripple counter in a 16-pin dual in-line package. The device is categorized as a counter IC element with a 14-bit counter stage and is intended for frequency division, timing, sequencing, and digital clock applications. Its through-hole DIP-16 construction supports conventional PCB assembly, prototyping, repair, and applications that require a readily available counter rather than a complex programmable digital controller. A binary ripple counter is a sequential digital circuit that divides an input clock by powers of two. The CD4020AF3 belongs to the CMOS logic hierarchy, where CMOS means complementary metal-oxide-semiconductor. CMOS counters provide a practical way to reduce a clock frequency while preserving a simple digital interface. The part can be used in designs requiring periodic events, elapsed-time measurement, waveform repetition, programmable timers, and low-frequency clock generation. The CD4020AF3 uses a 16-pin DIP package, and distributor listings identify the device as a counter with a 14-bit count element. The CD4020 family is associated with the CD4000 CMOS logic series, a broad family historically used for low-power digital logic implementation. Exact operating voltage, current, timing, propagation-delay, maximum input frequency, and environmental limits must be confirmed in the manufacturer datasheet before a production design is released. The AF3 ordering code identifies a particular Harris Corporation package and qualification configuration. Because availability and lifecycle status can differ between manufacturers, distributors, and legacy inventory channels, engineers should verify the exact package dimensions, temperature range, marking convention, and sourcing condition before placing an order. The CD4020AF3 is especially relevant to repair and redesign work where changing the PCB footprint is undesirable and a pin-compatible 16-pin counter is required. Typical circuit roles include binary frequency division in clock-generation modules, event-counting stages in industrial controls, repetitive pulse timing in test equipment, and low-power sequencing in embedded systems. A practical design should include reset-state analysis, unused-input biasing, clock-edge selection, and output-decode logic appropriate to the intended count sequence. This page combines the exact CD4020AF3 identity, package classification, sourcing information, application guidance, and pin-compatible replacement guidance. It also highlights the practical distinction between a true drop-in replacement and a merely similar counter: pin arrangement, count length, logic levels, supply range, timing, and qualification requirements must all match before substitution is appropriate. For new designs, begin with the manufacturer datasheet and confirm the reset behavior, output states, operating limits, and absolute maximum ratings. For legacy equipment, evaluate the replacement in the complete system because timing margin and unused-pin treatment can affect reliability even when the physical footprint is unchanged.
CD4020AK3 - 14-Bit CMOS Counter, 3-12V | Texas Instruments
Texas Instruments CD4020AK3 is a CMOS 14-stage ripple-carry binary counter operating from 3 V to 12 V in a 16-lead ceramic flat pack (CFP) package. It combines fourteen sequential counting stages with counter-control functions for frequency division, timing, and event sequencing. The qualified temperature range extends from -55 °C to +125 °C, supporting industrial, instrumentation, and military-temperature applications that require reliable operation across a broad thermal environment. A ripple-carry binary counter is a type of sequential logic circuit that divides an input clock frequency by two at each counting stage. The CD4020A family belongs to the CD4000 CMOS logic series, whose architecture places counter, timing, and interface functions within the broader CMOS logic and integrated-circuit hierarchy. A clock applied to the counting input advances the internal binary state, while the available output stages provide useful frequency-divided signals without requiring a separate bank of cascaded counter packages. The CD4020AK3 is specified for a 3 V to 12 V supply range, a 14-bit counting structure, and operation from -55 °C to +125 °C. Its 16-CFP package provides a temperature-rated ceramic mounting option for applications where reliability and environmental range are more important than the lower cost and smaller size of a plastic package. The counter also provides dedicated control inputs and multiple output taps, allowing a circuit designer to select the required division ratio rather than using only the full 14-bit terminal count. The CD4020A implementation uses positive-edge clocking to advance its binary count and includes set and reset controls for defining the starting state. Because a ripple counter propagates carry transitions through successive stages, maximum operating frequency can depend on the specific clock waveform and propagation path. Designs should therefore use clean, fast edges, maintain an appropriate duty cycle, and account for settling time at the output stage being observed. Typical uses include divide-by-N frequency generation, timer reference signals, pulse counting, industrial control sequencing, and clock-frequency division in instrumentation. The CD4020AK3 is particularly appropriate when the system requires one device to provide multiple division ratios, a wide operating voltage range, or operation across the -55 °C to +125 °C temperature range. An external crystal oscillator or clock source can drive the counter, while downstream logic selects the appropriate divided output. PCB design should preserve a common ground reference between the counter, clock source, and receiving logic. Keep clock traces short, avoid routing the clock adjacent to noisy switching nodes, and use a local supply bypass capacitor close to the device power terminal. Unused outputs should be left unconnected unless a test point is useful, and control inputs should not float. Verify the external reset and set sequencing so that no invalid clock edge occurs during initialization. This page combines the CD4020AK3 device characteristics, commercial sourcing guidance, application analysis, and engineering cautions for counter and divider designs. The manufacturer datasheet remains the controlling reference for pin assignments, maximum clock rates, output timing, and recommended operating conditions.
CD4020BCM - 14-Stage Binary Counter | onsemi | Industrial
The onsemi CD4020BCM is a 14-stage ripple-carry binary counter in a 16-pin SOIC package, with one counter element that advances on the negative transition of each clock pulse. The device provides a single-element counter architecture, a 14-bit counting sequence, and an active-high reset function, making it suitable for frequency division, timing, and digital state-counting applications. The industrial temperature grade supports equipment operating across industrial ambient conditions. A binary counter is a sequential digital circuit that records the number of clock events as a binary value. A ripple-carry counter implements this function as a chain of master-slave flip-flop stages, with each stage driving the next. In the CD4000 CMOS logic family, this architecture provides simple binary division and extended count capability without requiring a microprocessor, programmable counter, or complex external logic. The CD4020BCM is a 14-stage member of that family and is the relevant member when a design needs more than the 12 stages provided by a CD4040B. The principal feature is the 14-stage counting capability combined with 14 available binary output positions. The counter advances when the clock input changes from high to low, so timing diagrams and triggering logic must account for negative-edge operation. A reset input returns the counter to its all-zero state. The 16-SOIC surface-mount package also supports compact layouts while keeping the counter in a standard small-outline footprint. Because each stage toggles in response to the preceding stage, the circuit is a ripple counter rather than a synchronous counter. Ripple counters are inexpensive and straightforward, but accumulated propagation delay can affect the timing relationship between output bits at higher operating frequencies. Designers should therefore determine the usable clock rate from the complete timing chain and use the outputs only when their settling requirements are satisfied. Typical applications include dividing an input clock into lower-rate timing signals, counting external events in industrial control equipment, generating extended binary count sequences in test equipment, and sequencing operations in legacy CMOS designs. The counter can also be combined with external gating or decoding logic to produce repetitive intervals, elapsed-event counts, and periodic control pulses. Layout should keep the clock and reset traces short, provide a stable ground reference, and avoid routing sensitive clock signals alongside noisy switching nodes. Decoupling capacitors should be placed close to the supply pins according to the manufacturer datasheet and standard mixed-signal layout practice. Because the counter is edge-triggered, reset release timing must be coordinated with the clock to prevent an unintended count immediately after startup. This product page combines the CD4020BCM's verified architecture and package information with practical selection criteria, drop-in replacement findings, interface considerations, and a parameter-by-parameter comparison. It is designed to help engineers determine whether the device fits a timing or counting design without introducing an unnecessary processor-based implementation.
CD4020BCN - 14-Bit Binary Counter | onsemi | DIP
The onsemi CD4020BCN is a 14-stage ripple-carry binary counter and divider with one counter element, a 14-bit count range, negative-edge clocking, and a 16-pin PDIP package. Its fourteen independently available outputs support binary division by 2 through 16,384, while a high-level RESET input returns the counter to its all-zero state. A CMOS binary counter is a sequential logic device that stores and advances a binary count when triggered by a clock edge. The CD4000 family belongs to the broader CMOS logic hierarchy, where counters complement flip-flops, latches, gates, and decoders. This distinction matters because a counter preserves multi-bit state across clock cycles instead of producing only a single combinational output. Key features include fourteen master-slave flip-flop stages, negative-transition clock operation, individual Q0 through Q13 outputs, and Schmitt-trigger action on the clock input. The Schmitt-trigger clock behavior improves tolerance of slow input rise and fall times, which helps reduce multiple transitions in practical oscillator and divider circuits. The counter advances by one count on each negative clock transition rather than on the positive transition. Each ripple stage clocks the following stage, allowing the outputs to change in a defined sequence during a ripple transition. The RESET input provides a common mechanism for restarting a divided count in timer, sequencer, and periodic-waveform systems. Although the device divides a clock, it is not a programmable divider; each division ratio is selected by connecting the appropriate Q output back to the clock input. Typical uses include digital timers, frequency dividers, pulse-rate counters, clock-generation circuits, and sequential timing systems. In a divide-by-16 arrangement, Q4 feeds the clock input and the circuit produces one output transition for every 16 input cycles. Divide ratios through Q13 allow substantially longer periods, while the available high-order outputs can serve as programmable timer taps. The main design consideration is clock-edge selection. Because counting occurs on the negative transition, input waveforms with slow edges or excessive ringing may create false transitions unless the clock meets the device's input timing requirements. External filtering or a suitable oscillator should provide clean transitions, and unused counter outputs should remain properly terminated according to the manufacturer's circuit guidance. This product page combines the counter's core operating characteristics, package-level details, application guidance, drop-in replacement analysis, and parameter-by-parameter comparisons to support component selection, PCB planning, and legacy-design maintenance.
CD4020BD - 14-Stage CMOS Counter | Texas Instruments
The Texas Instruments CD4020BD is a CMOS 14-stage ripple-carry binary counter and divider with a 16-pin SOIC package, operating from 3 V to 18 V and supporting clock frequencies up to 24 MHz. It provides independently accessible binary outputs, a master reset input, and oscillator-capable clock inputs for frequency division and timing applications. A binary counter is a sequential digital-logic component that advances its internal count when triggered by a clock edge. The CD4020 belongs to the CMOS counter/divider hierarchy, where it combines a clocked counting circuit with multiple parallel output stages. Each output represents a different binary bit of the accumulated count, allowing one incoming clock waveform to produce division ratios from 2 through 16,384. The principal features of the CD4020BD include 14 ripple-carry stages, operation across a 3 V to 18 V supply range, and operation up to 24 MHz. Its parallel outputs support Q0 through Q12 and the final divided output Q14. A master reset terminal returns the counting sequence to its initial state, while separate oscillator terminals provide access to the internal oscillator or allow external timing signals to drive the counter. Ripple-carry implementation means that each counting stage triggers the next stage after a propagation delay. This architecture is effective when the outputs are sampled at a slower rate than the input clock, but it is not a synchronous design in which all stages update on one common edge. Engineers should therefore account for accumulated propagation delay and use the device where output timing does not require simultaneous state changes. Typical uses include digital frequency dividers, periodic-event generators, timer and delay circuits, industrial counters, instrumentation, and embedded control logic. The CD4020 can generate divide-by-2, divide-by-4, divide-by-8, divide-by-16, and higher ratios without requiring a bank of individual flip-flops. Its broad supply range also permits operation across common 3.3 V, 5 V, and higher-voltage CMOS systems. When designing a divider, verify the maximum clock rate against supply voltage and temperature, and place a suitable bypass capacitor close to the supply terminals. Do not drive unused inputs with floating nets. Because ripple transitions can occur between stages, add qualification at each output when downstream circuitry must not observe intermediate count values. This product page combines the manufacturer device information, sourcing guidance, complete package pin assignment, operating comparisons, and practical design guidance for engineers evaluating the CD4020BD as a legacy-compatible CMOS counter and divider.
CD4020BE - 14-Bit Ripple-Carry Counter | Texas Instruments
The Texas Instruments CD4020BE is a 14-bit CMOS ripple-carry binary counter and divider with a negative-edge-triggered clock input, operating from a single supply in a 16-pin plastic dual-inline package (16-PDIP). The counter advances one count on each high-to-low transition of the clock and provides 14 binary output stages for frequency division, timing, and event counting. An active-high reset allows the counting sequence to be cleared before a new operation. A ripple-carry binary counter is a type of sequential logic circuit that advances a binary count after each active clock edge. Its stages are connected in cascade, so propagation delay accumulates across the counter. This makes the CD4020BE suitable for simple divide-by-2^n and divide-by-2^(n+1) arrangements when the required output is the logical counter state rather than a high-speed synchronous binary word. The CMOS implementation places the device within the broader hierarchy of counter IC, digital logic IC, and semiconductor categories. The verified CD4020BE features include a single 14-bit counter element, negative-edge operation, 12 buffered outputs identified in the supplied comparison data, and a 16-PDIP package. The counter uses master-slave stages, helping prevent output changes while the clock is at its active level. Its divide-by-two output arrangement enables cascaded frequency division without requiring a separate binary-to-binary divider. The ripple architecture makes each successive output change after the clock transition because the carry propagates through the internal flip-flops. Designers should therefore use the appropriate decoded or single-stage output rather than treating Q13 and Q0 as a simultaneously updated binary bus. The package's through-hole format also supports prototyping, educational instruments, industrial control systems, and repair applications where PCB access and hand soldering are important. Typical uses include divide-by-16 or divide-by-4096 clock generation, periodic timer references, digital frequency division, industrial sequence counters, and embedded control logic. Because the counter responds to the negative clock edge, the source waveform, reset timing, and any downstream decoder must be checked to avoid counting an unintended transition. When laying out a new design, route the clock away from sensitive analog nodes and provide a clean return path. For reliable reset release, ensure the reset signal is inactive before the first intended clock edge. If the application requires simultaneous binary updates, a synchronous counter should be considered because ripple propagation delay can create intermediate output states. This page consolidates verified distributor information, pin-compatible counter alternatives, parameter comparisons, and practical design guidance. It helps engineers distinguish the CD4020BE from positive-edge counters and non-pin-compatible divider functions before committing to a PCB or production order.
CD4020BEX - 14-Stage CMOS Counter | Harris Corporation
Harris Corporation CD4020BEX is a CMOS 14-stage ripple-carry binary counter and divider in a 16-pin dual in-line package. It provides 14 binary counting stages, an external clock input, reset control, and an oscillator section suitable for frequency division and timing applications. A CMOS binary counter is a digital logic device that increments an internal binary count when triggered by an active clock edge. The CD4000 series belongs to the CMOS logic hierarchy, combining low static power consumption with wide supply-voltage tolerance. Counters in this family are commonly used to divide one frequency into lower clock or timing signals without requiring a programmable microcontroller. The CD4020BEX provides a 14-stage counting section rather than the 16-stage architecture associated with some other binary-counter families. Its useful output stages support divide-by-two and higher division ratios. Because the output behavior is determined by the binary counter and oscillator stages, the device is suitable for pulse counting, frequency division, timing generation, and low-frequency clock derivation. The ripple-counter implementation allows each stage to propagate a clock transition to the following stage. This structure provides straightforward division from the external clock while remaining suitable for applications where propagation delay between stages is not the principal constraint. An internal oscillator section can also be used for frequency generation, subject to the operating conditions and component recommendations in the manufacturer datasheet. Typical uses include digital timing systems, industrial control counters, pulse-rate measurement, clock division, and periodic-event generation. The CD4020BEX is particularly appropriate for legacy equipment, repair assemblies, and new designs that specifically require the CD4020B architecture and the 16-pin DIP footprint. When laying out the circuit, keep clock and reset traces short, maintain a common ground reference, and place any required timing or bypass capacitors close to their associated pins. Confirm supply-voltage limits, output-drive requirements, and maximum operating frequency against the manufacturer datasheet before using the counter in high-speed or safety-related systems. This product page combines the functional description, package details, sourcing options, comparison guidance, and application-oriented design considerations needed to evaluate the CD4020BEX for a new PCB or an existing DIP-16 assembly.
CD4020BK - 14-Stage Binary Ripple Counter | Harris
Harris Corporation CD4020BK is a 14-stage, negative-edge-triggered ripple-carry binary counter and divider in a 16-pin flat-rail CFP package. The verified product data identifies one counter element, 14 counter bits, and a binary counter/divider function. Its RESET input returns the counter to the all-zero state, while each negative transition of the clock input advances the count. The input stage uses Schmitt-trigger action, allowing operation with slow or noisy clock transitions. A binary counter is a sequential logic device that stores and advances a binary number on each active clock transition. In the broader semiconductor hierarchy, the CD4020BK belongs to the counter and divider category, within CMOS logic ICs and digital logic. Its 14 internal stages can divide a periodic input by binary factors up to 2^14, subject to the operating conditions and propagation characteristics specified by the manufacturer. The verified distributor listing classifies CD4020BK as a 1-element, 14-bit, negative-edge-triggered counter in a 16-CFP package. The related manufacturer product information identifies the CD4020B family as a CMOS ripple-carry binary counter/divider. Each stage is described as a master-slave flip-flop, allowing the counter state to advance cleanly when the input clock undergoes a negative transition rather than reacting to both edges. Typical uses for this counter family include digital time-base generation, frequency division, programmable timing, clock-frequency reduction, and low-frequency waveform generation. The RESET function makes the device useful in sequential systems that require a defined starting state. The Schmitt-trigger clock input is particularly relevant when the source has a slow edge or transition disturbance, although external conditioning may still be needed in demanding EMI or high-noise environments. CD4020BK is identified with a military temperature grade and a flat, 16-terminal package. Because the supplied data does not state the exact supply-voltage range, operating-temperature limits, maximum clock frequency, output drive capability, or absolute maximum ratings, those values must be confirmed against the manufacturer datasheet before design release. Do not infer missing ratings from the CD4020B family without checking the applicable CD4020BK grade and package. This product-data page consolidates verified distributor pricing, package and counter details, functional comparisons, design guidance, and same-package replacement constraints. The comparison also distinguishes documented facts from unavailable electrical parameters, helping engineers make a qualification decision without converting family-level information into unsupported CD4020BK specifications.
CD4020BK3 - 14-Bit CMOS Binary Counter | Harris | Logic
The Harris CD4020BK3 is a 14-stage ripple-carry CMOS binary counter and divider with one counting element, negative-edge clock operation, and a 16-CFP through-hole package. The family operates from 3 V to 18 V and supports clock frequencies up to 24 MHz, making it suitable for frequency division, timing, sequencing, and digital clock-generation circuits. A binary counter is a sequential digital circuit that records successive binary values at its clock input. A ripple-carry counter uses cascaded flip-flop stages, with each stage driving the next; this creates a simple, economical implementation with multiple independently accessible count outputs. The CD4020 belongs to the CMOS CD4000 logic family, a hierarchy of low-power digital ICs built around metal-oxide-semiconductor field-effect transistors and widely used for counters, dividers, gates, latches, and timers. The CD4020 provides 14 count stages, allowing division of an input clock by binary ratios from 2 through 16384. Its negative-edge-triggered clock input advances the count on the falling transition, while a high-level reset input clears the counter to its all-zero state. With a 3 V to 18 V supply range and operation to 24 MHz, the device bridges low-speed industrial timing and higher-speed digital frequency division requirements. Operation is based on cascaded master-slave stages. When the clock changes from high to low, the first stage toggles and its carry output advances the following stage. The outputs therefore divide the input frequency by successive powers of two. Because propagation delay accumulates through the cascade, the useful operating frequency must remain within the device’s specified timing limits, and unused stages should not be relied upon as zero-delay logic outputs. Typical applications include divide-by-N clock generation, pulse-rate reduction, programmable timing modules, digital time-base circuits, oscillator counters, sequential control, and industrial pulse-distribution systems. An oscillator supplies the source clock, the CD4020 divides it, and downstream logic selects or gates the divided outputs. The 16-CFP package also supports through-hole assembly and prototype or repair work where surface-mount packages are less convenient. Designers should use the manufacturer’s pin-description table when assigning PCB tracks and should account for unused output states during startup and reset. Input signal levels must remain within the supply-dependent CMOS limits, and external rise-time control may be needed when driving long traces. Decoupling close to the supply pins reduces supply noise, while careful clock routing limits false transitions and unwanted count advancement. This page combines the CD4020BK3 function, family-level operating parameters, pin-package guidance, sourcing information, and drop-in comparison with related CD4020 devices. It also identifies the important trade-offs among counter grades and package options so engineers can select a replacement without overlooking voltage, speed, temperature, or footprint constraints.