بەرهەمەکان (730+)

ADSY1100 - 4Tx/4Rx 20GSPS RF Digitizer | Analog Devices
ADSY1100

ADSY1100 - 4Tx/4Rx 20GSPS RF Digitizer | Analog Devices

The Analog Devices ADSY1100 is a fully integrated ultra-wideband, multichannel RF transceiver and processing system-on-module (SOM) in a 3UVPX SOSA-aligned format. It is built around ADI's next-generation "Apollo" MXFE product (AD9084), featuring DAC sample rates up to 28 GSPS and ADC sample rates up to 20 GSPS in a 4Tx/4Rx configuration. The module supports RF frequencies from 0.1 GHz to 20 GHz, making it a versatile solution for wideband signal acquisition and generation. An RF digitizer is a system that converts analog RF signals into digital data for processing, often incorporating tuners, ADCs, DACs, and digital signal processing. The ADSY1100 integrates these functions into a compact 3UVPX form factor, enabling rapid system integration for defense, aerospace, and communications applications. As a system-on-module, it combines the RF front-end, data converters, and processing capabilities, reducing development time and system complexity. Key features include 4 transmit and 4 receive channels, support for 100Gb optical data links for high-speed external data transfer, and a VITA 65 slot profile for standardized backplane integration. The module is designed for high-density, multi-channel systems where space and power efficiency are critical. Its wide frequency range and high sample rates enable direct RF sampling, eliminating the need for multiple downconversion stages. The ADSY1100 leverages the AD9084 MXFE, which integrates high-speed DACs and ADCs with digital signal processing blocks. This architecture provides flexibility in configuring the system for various bandwidths and center frequencies. The 100Gb optical links allow seamless data streaming to external processors or FPGAs, supporting real-time signal processing and analysis. Typical applications include electronic warfare, radar systems, satellite communications, and spectrum monitoring. The module's wideband capability and high dynamic range make it suitable for capturing and analyzing complex RF environments. Its SOSA-aligned format ensures interoperability with other SOSA-compliant modules, facilitating system upgrades and maintenance. When designing with the ADSY1100, consider the thermal management requirements due to the high-speed converters and processing elements. Adequate cooling and power supply decoupling are essential for reliable operation. The module's backplane interface follows the VITA 65 standard, ensuring proper mechanical and electrical integration.

RFQ پەیوەندی
AHM26108D - WiFi HaLow 802.11ah M.2 Module 32.5 Mbps | ALFA Network
AHM26108D

AHM26108D - WiFi HaLow 802.11ah M.2 Module 32.5 Mbps | ALFA Network

The ALFA Network AHM26108D is a WiFi HaLow (IEEE 802.11ah) industrial M.2 module that enables long-range, ultra-low-power wireless networking in sub-1 GHz license-exempt bands, housed in a compact M.2 2230 form factor with data rates up to 32.5 Mbps. The module is built around Morse Micro 802.11ah silicon, positioning it as one of the first commercially available M.2 WiFi HaLow adapters for embedded and industrial hosts. WiFi HaLow is the IEEE 802.11ah standard extension of the Wi-Fi family that operates in sub-1 GHz spectrum (typically 868 MHz in the EU and 915 MHz in the US). Compared with conventional 2.4/5 GHz Wi-Fi, sub-1 GHz propagation delivers significantly longer reach and better wall penetration at very low power; compared with LoRa, which tops out around 38.4 kbps in common configurations, the AHM26108D achieves up to 32.5 Mbps - roughly three orders of magnitude higher throughput - while retaining kilometer-class range characteristics. Key features include the M.2 2230 card format for drop-in integration into hosts with an M.2 socket, IP-relevant industrial-grade targeting, and native IP networking via the familiar Wi-Fi stack rather than proprietary LPWAN protocols. This means standard TCP/IP tools, DHCP, TLS, and existing network management software work without gateways translating between protocols. Because HaLow traffic is standard Wi-Fi framing over sub-1 GHz, the module suits star topologies where one HaLow access point (such as the ALFA Tube-AHM) serves many low-power client devices. Security follows the WPA framework of the Wi-Fi Alliance 802.11ah certification program. Typical applications include sensor networks, weather stations, industrial monitoring systems, patient monitoring, agriculture monitoring, and security cameras - anywhere long range, low power, and IP connectivity are required simultaneously. Design consideration: verify the host M.2 key and USB/SDIO interface mapping, and select the correct regional variant (EU 868 MHz or US 915 MHz) to comply with local spectrum regulations. This page synthesizes distributor pricing, availability, application guidance, and drop-in alternative analysis not found on the manufacturer product page alone.

RFQ پەیوەندی
AHMC8108 - 802.11ah HaLow WiFi Module 43.3 Mbps | ALFA Network
AHMC8108

AHMC8108 - 802.11ah HaLow WiFi Module 43.3 Mbps | ALFA Network

The ALFA Network AHMC8108 is a Wi-Fi HaLow (IEEE 802.11ah) wireless module delivering data rates up to 43.3 Mbps at 8 MHz channel bandwidth, designed to enable long-range, low-power connectivity for IoT applications. Wi-Fi HaLow is the IEEE 802.11ah wireless standard that operates in sub-1 GHz licensed-exempt frequency bands. Unlike conventional 2.4 GHz and 5 GHz Wi-Fi (802.11n/ac/ax), HaLow trades peak throughput for dramatically extended range and lower power consumption, making it a member of the broader family of low-power wide-area network (LPWAN) technologies alongside LoRa and Sigfox, while retaining native IP connectivity and standard Wi-Fi security frameworks. The AHMC8108's headline specification is its 43.3 Mbps maximum data rate at 8 MHz bandwidth, the highest PHY rate commonly used in 802.11ah deployments. This high-speed capability differentiates it from narrowband HaLow configurations (1 MHz and 2 MHz channels), enabling use cases that need to move more than simple sensor telemetry, such as video-capable surveillance links and fast firmware-over-the-air updates. According to the manufacturer, the module targets connectivity across many IoT application domains, including sensor networks, weather stations, industrial monitoring, medical patient monitoring, agriculture monitoring, and surveillance cameras. The sub-1 GHz HaLow radio provides wall and foliage penetration superior to 2.4 GHz Wi-Fi, which is critical for outdoor and in-building IoT coverage. Typical deployments include agricultural sensor gateways that must span large fields, industrial facility monitoring where metal structures attenuate higher frequencies, and weather station networks reporting wind, rainfall, and temperature data over multi-hundred-meter links. When designing with this module, verify the regulatory domain requirements for the target sub-1 GHz band (for example 902-928 MHz in North America or 863-868 MHz in Europe), as antenna selection and transmit power limits vary by region. This page synthesizes manufacturer product information, application guidance, and pricing data not consolidated in the manufacturer product page, and flags all unverified parameters explicitly rather than estimating them.

RFQ پەیوەندی
AI50H - LoRa SoC Module 48MHz Cortex-M4 | AcSiP
AI50H

AI50H - LoRa SoC Module 48MHz Cortex-M4 | AcSiP

The AcSiP AI50H is an RF System-on-a-Chip LoRa wireless module integrating an ARM Cortex-M4 32-bit RISC core operating at a frequency of up to 48 MHz, paired with a Semtech SX127x-class LoRa transceiver in the 863–930 MHz ISM bands. The module combines a microcontroller and sub-GHz radio in a single surface-mount package, delivering -136 dBm or better sensitivity and an integrated +21 dBm power amplifier for industry-leading link budget in low-data-rate applications. What is a LoRa SoC module? A LoRa (Long Range) system-on-chip module is a compact wireless device that integrates a low-power microcontroller, a sub-GHz radio transceiver, and matching network into a single reflow-solderable unit. Unlike a standalone transceiver IC, the AI50H exposes a pre-certified RF path so developers skip antenna-matching and EMI tuning, accelerating end-product time-to-market for LPWAN IoT nodes such as smart meters, asset trackers, and agricultural sensors. Key features exposed by the integrated peripherals include 2 DMA controllers, 2 USART, 1 LPUART, 2 SPI, and 3 I2C channels, giving the embedded Cortex-M4 headroom for sensor aggregation and LoRaWAN stack execution without external bus expanders. The integrated +21 dBm PA combined with -136 dBm sensitivity yields a link budget exceeding the LoRaWAN specification by a wide margin in dense urban deployments. Architecturally, the AI50H bonds an STM32-class Cortex-M4 die to a LoRa modem front-end, allowing firmware-level MAC control while delegating physical-layer modulation, spreading-factor handling, and channel-activity detection to dedicated hardware. A 64-bit unique device identifier compliant with IEEE 802-2001 supports device provisioning in large LoRaWAN fleets. Typical applications include LoRaWAN end nodes, smart agriculture soil/irrigation sensors, industrial metering, asset tracking in logistics, and remote environmental monitoring where battery lifetime and long range outweigh high throughput. Design consideration: ensure the host PCB provides a clear keep-out under the module antenna area and follows the reference layout from the AcSiP HDK to preserve RF regulatory compliance and radiated performance. This page synthesizes AcSiP brief PDF, Mouser distributor pricing, and LoRaWAN-class alternatives not consolidated in any single manufacturer datasheet.

RFQ پەیوەندی
AL1306 - IO-Link Master with PROFINET, 8xM12, IP67 | ifm
AL1306

AL1306 - IO-Link Master with PROFINET, 8xM12, IP67 | ifm

The ifm efector AL1306 is an IO-Link master with PROFINET interface designed for field-mountable industrial automation use, providing 8 IO-Link ports on M12 A-coded 4-pin connectors with FKM sealing. It supports up to 12 digital inputs and 8 digital outputs, operates on a 20-30 V DC supply, and is rated IP67 for dust-tight and waterproof field deployment. The unit is engineered as a Profinet IO-Link master with 8 x M12 ports, IoT port capability, and conforms to the PROFINET and IO-Link standards for industrial sensor/actuator networking. An IO-Link master is the gateway device that bridges bidirectional IO-Link point-to-point communication between intelligent sensors/actuators and higher-level fieldbus networks such as PROFINET, EtherNet/IP, or EtherCAT. Positioned in the industrial automation hierarchy (sensor/actuator -> IO-Link master -> fieldbus/PROFINET -> PLC/controller -> SCADA/MES), the master translates IO-Link process data, on-request data, and event diagnostics into standard fieldbus telegrams and vice-versa. Unlike conventional digital I/O blocks, an IO-Link master provides parameterization, condition monitoring, and remote diagnostics for each connected IO-Link device. Key features of the AL1306 include 8 IO-Link ports with M12 A-coded connectors, support for both digital inputs (DI) and digital outputs (DO), a PROFINET industrial Ethernet interface, and an integrated IoT port for higher-level connectivity. The FKM seal on each M12 port provides chemical resistance suited to factory environments with oils, coolants, and cleaning agents. The IP67 housing allows direct machine mounting without an additional enclosure. Technically, the AL1306 implements the IO-Link specification v1.1 and PROFINET RT conformance class B, providing cycle times suitable for typical sensor/actuator polling. Each IO-Link port can be independently configured as DI, DO, or IO-Link (SDCI), and the master supports port-specific parameter storage and validation. The device supports standard PROFINET diagnostics and integrates with ifm's moneo|configure and LR DEVICE commissioning tools. Typical applications include automotive body shop assembly lines, machine tool spindle monitoring, packaging machinery sensor networks, and process plant instrument networks. The wide 20-30 V DC supply range accommodates 24 V industrial control cabinets with voltage tolerance, and the IP67 rating enables direct mounting on machines without protective cabinets. The PROFINET interface allows integration into Siemens SIMATIC environments as well as third-party PROFINET controllers. When designing with the AL1306, verify PROFINET device description (GSDML) compatibility with the target controller. Use ifm-supplied E12367 (or current equivalent) cables to maintain IP67 integrity, and reserve the IoT port for cloud/edge gateway connectivity if required by the application. Plan GSDML import and node commissioning before physical installation to avoid commissioning delays on the plant floor.

RFQ پەیوەندی
AP-100AH-OUT-KIT - 802.11ah HaLow Outdoor Kit | Silex
AP-100AH-OUT-KIT

AP-100AH-OUT-KIT - 802.11ah HaLow Outdoor Kit | Silex

The Silex Technology AP-100AH-OUT-KIT is a fully assembled outdoor deployment kit for IEEE 802.11ah (Wi-Fi HaLow) connectivity, integrating the AP-100AH HaLow access point radio inside an IP65-rated weatherproof enclosure with a high-temperature rated power supply, waterproof cable glands, internal networking and power cables, and a weatherproof outdoor antenna. An 802.11ah Wi-Fi HaLow access point is a networking device that operates in the sub-1 GHz band, a wireless technology designed for long-range, low-power IoT connectivity. Within the network hierarchy, it sits above end IoT devices and below the core Ethernet backbone, bridging sensor networks to enterprise infrastructure. Wi-Fi HaLow extends the Wi-Fi family (802.11 standards) into ranges approaching 1 km with multi-megabit throughput, complementing short-range options such as 802.11n and Bluetooth. Key features include the first commercially available 802.11ah access point silicon solution, long-range multi-megabyte connectivity for any Ethernet device, an IP65 outdoor enclosure for harsh environments, and factory assembly - the kit arrives ready to mount, reducing deployment engineering time. The kit allows any Ethernet device to communicate with other 802.11ah devices across an extended Wi-Fi HaLow network. The underlying AP-100AH radio supports connectivity with large numbers of HaLow client devices (the extended-temperature AP-100AH (JP) variant is documented by Silex as covering a 1 km radius with up to 647 connected clients), making the outdoor kit suitable for dense sensor deployments across campuses, industrial sites, and agricultural land. RoHS compliance is documented for the AP-100AH and BR-100AH outdoor kit family. Typical applications include outdoor industrial IoT sensor backhaul, smart-city and campus-wide metering networks, surveillance camera connectivity where Ethernet cabling is impractical, and agricultural monitoring across large areas. Design consideration: because the kit is fully assembled and sealed to IP65, plan cable routing through the supplied waterproof glands before final mounting, and verify power supply placement within its high-temperature rating. This page synthesizes distributor availability data, manufacturer product information, and deployment guidance not consolidated in the manufacturer datasheet alone.

RFQ پەیوەندی
AP-100AH-US - 802.11ah Wi-Fi HaLow Access Point | Silex Technology
AP-100AH-US

AP-100AH-US - 802.11ah Wi-Fi HaLow Access Point | Silex Technology

The Silex Technology AP-100AH-US is a commercially available IEEE 802.11ah (Wi-Fi HaLow) wireless access point operating in the 903.5 MHz to 926.5 MHz sub-GHz band with data rates of 3.34 Mb/s, 7.22 Mb/s, and 15 Mb/s, powered from a 5 V supply via an Ethernet interface, in a 126 mm x 75 mm x 24 mm enclosure. The -US suffix denotes the United States regulatory region variant. An 802.11ah access point is a network infrastructure device that implements the IEEE 802.11ah (Wi-Fi HaLow) standard, a sub-1 GHz extension of the Wi-Fi protocol family designed for long-range, low-power Internet of Things connectivity. Within the wireless hierarchy, 802.11ah sits alongside 802.11ac/ax as a PHY/MAC amendment, trading raw throughput for roughly an order of magnitude more range than 2.4 GHz Wi-Fi, making it a wireless access technology for sensor networks, metering, and industrial automation. Key features include support for up to 234 associated stations (with manufacturer documentation citing up to 675 simultaneous connections), WPA3 security with 802.1x authentication planned via firmware update, and single-AP coverage of up to 3 kilometers. Sub-GHz propagation provides superior wall and foliage penetration compared to conventional 2.4 GHz Wi-Fi. The AP-100AH integrates the full access point functionality in a standalone enclosure with an Ethernet device interface for backhaul to existing infrastructure, allowing 802.11ah capability to be added to new or deployed networks without redesign. A GUI is provided for configuration per the product brief. Typical applications include smart city and campus IoT sensor networks, industrial monitoring over large facilities, agricultural telemetry, and smart building deployments where hundreds of battery-powered HaLow clients connect to one access point. Design consideration: the operating temperature range is 0 C to +40 C, so verify thermal environment in sealed outdoor enclosures, and plan the 5 V power budget over the Ethernet run. This page synthesizes distributor pricing references, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
AP-150AH-US - 802.11ah Wi-Fi HaLow Access Point | Silex Technology
AP-150AH-US

AP-150AH-US - 802.11ah Wi-Fi HaLow Access Point | Silex Technology

The Silex Technology AP-150AH-US is a high-performance 802.11ah Wi-Fi HaLow access point delivering bit rates up to 32.5Mbps over distances more than ten times longer than conventional 2.4GHz, 5GHz, and 6GHz Wi-Fi, in the US (915MHz) regulatory model based on the SX-SDMAH-US radio. Wi-Fi HaLow, defined by the IEEE 802.11ah standard, is a sub-1GHz wireless protocol purpose-built for the Internet of Things (IoT). Operating in the 915MHz license-exempt band, it trades the wide bandwidth of traditional Wi-Fi for dramatically extended range, superior wall and foliage penetration, and low power consumption - filling the gap between short-range Wi-Fi and LPWAN technologies such as LoRaWAN within the broader wireless networking hierarchy. Key features include its 32.5Mbps peak throughput, industry-leading transmission power among Wi-Fi HaLow products, and flexible powering via USB Type-C (5V) or a 12V/24V DC connector. This power flexibility allows deployment both in office/lab environments and in industrial installations wired to 12V or 24V control power, without dedicated AC/DC adapters. Architecturally, the AP-150AH-US integrates the SX-SDMAH-US Wi-Fi HaLow module operating in the 915MHz band, bridging long-range HaLow client devices onto a standard IP network. Because it operates as a full IP access point, integration into existing Ethernet/IP infrastructure is seamless - no proprietary gateways or protocol converters are required. Typical applications include large-scale IoT sensor backhaul, long-range video surveillance links, replacement of long cable runs with wireless links, smart city and agricultural monitoring, and rural communications where extended range offsets cell-tower offloading. The 10x range advantage makes it especially attractive for connecting devices across campuses, factories, or farms. A key design consideration: plan the RF environment around the sub-1GHz band - 915MHz propagation penetrates obstacles far better than 2.4GHz, but antenna placement and regulatory power limits still govern achievable link budget. For device management, pair the AP with Silex AMC Manager software, which supports remote management of up to 10,000 devices on the same network. This page synthesizes distributor availability data, pricing references as of 2026-10-20, and practical deployment guidance not consolidated in the manufacturer product brief.

RFQ پەیوەندی
ARM-N8-Sigfox - 868MHz Sigfox RCZ1 OEM Module | ATIM
ARM-N8-Sigfox

ARM-N8-Sigfox - 868MHz Sigfox RCZ1 OEM Module | ATIM

The ATIM ARM-N8-Sigfox (ARM-N8-SF) is an 868 MHz OEM radio transceiver module optimized for the Sigfox RCZ1 Low Power Area Network (LPWAN) and certified as a Sigfox Partner Network product. The module transmits at 14 dBm with a high-sensitivity receiver designed for long-range, half-duplex, bidirectional Ultra Narrow Band (UNB) communication, supporting both point-to-point local links and direct cloud uplink via the Sigfox network. Each uplink message is repeated three times on randomized channels to ensure reliable reception by one or more Sigfox base stations, with payload fragmentation handling for messages larger than the 12-byte Sigfox uplink frame limit. A Sigfox module is a pre-certified radio modem that implements the Sigfox UNB physical and MAC layers so that developers can attach sensors and microcontrollers without dealing with RF compliance, whitening, or Listen-Before-Talk (LBT) requirements themselves. Within the broader IoT connectivity hierarchy, Sigfox sits alongside LoRaWAN and NB-IoT as one of the three dominant LPWAN technologies, and ATIM is a recognized Sigfox ecosystem vendor with RF expertise dating back to 2010. The ARM-N8-Sigfox is one variant in the ARM-N8 family that also includes ARM-N8-LP/LD (local ISM bridge) and ARM-N8-LoRa (LoRa/FSK dual-mode) modules sharing a common form factor and serial command interface. Key features include 14 dBm conducted output power, an adaptive frequency agility algorithm for channel management, a transparent serial/RF bridge mode on the LP/LD variants, a built-in repeater function, multiple sleep/wake-up sources, and Listen-Before-Talk capability. The module is designed for ultra-low-power duty-cycled sensor nodes where battery life of multiple years is expected. Typical applications include remote metering (water, gas, electricity), environmental and agricultural sensors, asset tracking, smart-city lighting controllers, and any battery-operated IoT endpoint that must communicate kilometers from the nearest base station. The narrowband receiver and 14 dBm transmit budget enable line-of-sight ranges exceeding 25 km at 869 MHz according to manufacturer documentation. When designing with this module, allocate a UART interface for AT command control, leave room for a small helical or trace antenna matching network, and ensure the host MCU can wake the module via its wake sources. Check the host power supply for peak current during the three-redundant uplink bursts, which is significantly higher than the sleep current. The Sigfox message size cap of 12 bytes per uplink frame should be considered at the application layer.

RFQ پەیوەندی
AS22010P - 10GBASE-T Multi-Rate Ethernet PHY | Aeonsemi
AS22010P

AS22010P - 10GBASE-T Multi-Rate Ethernet PHY | Aeonsemi

The Aeonsemi AS22010P is a 2nd generation, low-power, multi-rate single-port physical layer transceiver (PHY) supporting 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, and 10BASE-Te. It is part of Aeonsemi's ChronoPHY™ family, an Ethernet PHY architecture optimized for low-jitter and low-latency operation in time-sensitive networking applications such as wireless infrastructure, AI edge, industrial automation, and real-time Ethernet systems. The device is offered in a 7 mm × 7 mm BGA package and is specified across the industrial temperature range of -40 °C to +85 °C. An Ethernet PHY (physical layer transceiver) is the analog front-end and digital encoding block that connects a MAC controller to a copper twisted-pair cable. Multi-rate PHYs like the AS22010P auto-negotiate among several IEEE 802.3 speeds on the same RJ45 port, allowing platform designers to upgrade from Gigabit Ethernet to multi-gigabit without changing the magnetics or PCB footprint. Within the broader hierarchy, the AS22010P sits as: Ethernet PHY → physical layer transceiver → network interface IC → wired-connectivity semiconductor. The ChronoPHY™ architecture prioritizes low-jitter clock recovery and PTP/1588 timestamping accuracy to support deterministic networking for AI edge and Wi-Fi 7 backhaul. Key features include support for NBASE-T and MGBASE-T multi-gig rates (2.5G/5G alongside 10G), extended cable reach beyond the IEEE 802.3 baseline of 55 m on Cat6A, advanced EMC and interference immunity, integrated PTP/1588 timing features, and approximately 40% lower power than the prior generation AS21010P. The BGA package provides a compact 7 mm × 7 mm footprint suitable for high-density switch and NIC designs where PCB real estate is at a premium. Typical applications include Wi-Fi 7 access-point uplinks, AI-edge inference gateways, multi-gigabit NAS platforms, AV-over-IP bridges, industrial TSN switches, and 10GBASE-T NIC cards. Designers migrating from the first-generation AS21010P can drop the AS22010P into the same board layout while gaining lower power, improved timing accuracy, and extended cable reach. For deterministic AI edge and wireless-infrastructure deployments, the AS22010P's low-jitter clock path directly improves MAC-to-PHY timestamp fidelity, a critical parameter for 5G fronthaul and TSN workflows. When designing with the AS22010P, observe the BGA PCB-layout recommendations in the datasheet (microvia stack-up, matched 100-ohm differential impedance, and integrated magnetic-module footprint) to preserve EMC performance across the full 100 m cable reach. This page synthesizes manufacturer documentation, second-generation release data, and parameter-by-parameter comparisons not consolidated on any single manufacturer page.

RFQ پەیوەندی
AS3991-BQFT - UHF RFID Single Chip Reader 840-960MHz | ams
AS3991-BQFT

AS3991-BQFT - UHF RFID Single Chip Reader 840-960MHz | ams

The ams OSRAM AS3991-BQFT is a single-chip UHF RFID reader IC integrating an analog front end and full EPC Class 1 Gen 2 (ISO 18000-6C) protocol handling for 840 MHz to 960 MHz operation, housed in a 64-VFQFN package with exposed pad and supplied in tape and reel packaging. A UHF RFID reader chip is the radio-side heart of an RFID interrogator: it generates the 860-960 MHz carrier, amplifies and transmits interrogator commands, receives the weak backscatter signal from passive tags, and demodulates it into digital data. In the system hierarchy, it sits below complete RFID reader modules and above discrete RF building blocks, combining PA driver, low-noise receiver, PLL synthesizer, and protocol engine in one semiconductor device. Key features include read/write support for ISO 18000-6C tags, a wide 840-960 MHz frequency range covering all regional UHF RFID bands (ETSI 865-868 MHz, FCC 902-928 MHz, and Asian bands), built-in programming options for protocol parameters, and lead-free, RoHS-compliant construction. The integrated protocol handler offloads dense tag-population work such as Q-algorithm anti-collision from the host processor. Technically, the AS3990/AS3991 family integrates the complete analog transmit and receive chain with a flexible digital interface so an external microcontroller only manages higher-level inventory logic. The AS3991 variant adds enhanced system integration options over the AS3990 within the same 64-QFN footprint, enabling shared PCB design across the family. Typical applications include fixed UHF RFID portals and gates for warehouse logistics, handheld and portable RFID readers, and industrial asset-tracking systems where EPC Gen 2 compliance and multi-regional frequency coverage are mandatory. Design-wise, the exposed pad of the 64-VFQFN must be soldered to a solid RF ground plane, and the PA output matching network must be tuned for the target regional band to maximize read range and meet regulatory emission masks. This page synthesizes distributor sourcing data, drop-in same-family alternatives, and practical design notes not found in a single manufacturer document.

RFQ پەیوەندی
ATK-LORA-01 - SX1278 LoRa 410-441MHz 3km Serial Module | ALIENTEK
ATK-LORA-01

ATK-LORA-01 - SX1278 LoRa 410-441MHz 3km Serial Module | ALIENTEK

The ALIENTEK ATK-LORA-01 is a compact, low-power, high-performance long-range LoRa wireless serial module based on the Semtech SX1278 spread-spectrum transceiver, operating in the 410 MHz to 441 MHz ISM band with 1 MHz channel step for 32 selectable channels. The module delivers up to 3 km line-of-sight communication range at 19200 bps air data rate and exposes a TTL serial interface (UART) for transparent point-to-point or point-to-multipoint links. What is a LoRa module? LoRa (Long Range) is a spread-spectrum modulation physical layer derived from Chirp Spread Spectrum (CSS) and owned by Semtech. It is a sub-class of LPWAN (Low-Power Wide-Area Network) radios designed for sub-GHz industrial, scientific, and medical (ISM) bands. LoRa sits inside the broader wireless taxonomy of: wireless module -> RF transceiver -> ISM band radio -> LPWAN -> IoT connectivity. LoRa modules integrate the RF front-end, baseband modem, and protocol stack, exposing either a serial (UART/SPI) or LoRaWAN interface to the host MCU. Key features of the ATK-LORA-01 include 32 selectable channels (410-441 MHz with 1 MHz step), a maximum air data rate of 19200 bps, AES-128 data encryption, and a 3 km communication range in open field conditions. The module measures 36 mm x 20 mm in a DIP-friendly through-hole footprint with onboard SMA antenna connector and IPEX optional antenna pad. It accepts 3.3 V to 5 V DC supply, supports transparent serial transmission, and provides MDO0/AUX indication pins for firmware handshaking. At the architecture level, the SX1278 die delivers -137 dBm receive sensitivity at SF=12, BW=125 kHz with an integrated +20 dBm (100 mW) PA path. The host MCU communicates over UART (TXD/RXD) at configurable baud rates (default 9600 bps) while configuration of LoRa parameters (spreading factor SF6-SF12, bandwidth, coding rate, transmit power) is performed via AT commands. Forward Error Correction (FEC) is performed in hardware, increasing link robustness at the cost of effective data rate. Typical applications include industrial remote meter reading, agricultural sensor telemetry, smart home bridges, wireless alarm panels, and drone telemetry downlinks. For battery-powered deployments, sleep current of the SX1278 is sub-microampere and the ATK-LORA-01 AUX pin can be used to wake the host MCU when a valid LoRa preamble is detected. Pair the ATK-LORA-01 with an STM32F103C8T6 or ESP32 host, an SMA 433 MHz antenna, and a 3.3 V LDO to build a long-range IoT node. Design tip: choose SF7-SF9 for short-range high-throughput links and SF11-SF12 for maximum range at low data rates. Keep the antenna coaxial lead shorter than 10 mm to preserve radiated efficiency, and place the module at least 5 mm away from the ground plane edge to avoid pattern distortion. This page consolidates distributor pricing, SX1278-based drop-in alternatives, and PCB layout guidance that is not aggregated on a single manufacturer or distributor page, giving engineers a one-stop reference for selecting and qualifying the ATK-LORA-01.

RFQ پەیوەندی
ATK-LORA-02 - LoRa Wireless Serial Module | ALIENTEK
ATK-LORA-02

ATK-LORA-02 - LoRa Wireless Serial Module | ALIENTEK

The ALIENTEK ATK-LORA-02 is a long-range wireless serial port module based on Semtech LoRa spread-spectrum modulation, housed in a surface-mount SMD-15 package measuring 17x24 mm. The module operates in the sub-1 GHz industrial-scientific-medical (ISM) band and provides transparent UART-to-air bridging for point-to-point or point-to-multipoint links. Its integrated RF front-end delivers up to +20 dBm (100 mW) transmit power while maintaining high receiver sensitivity below -120 dBm at low data rates. A LoRa module (Long Range module) is a type of low-power wide-area network (LPWAN) wireless transceiver that uses chirp spread-spectrum (CSS) modulation to achieve multi-kilometer range at low data rates. Within the broader RF & Wireless taxonomy, LoRa modules sit below RF transceiver ICs and above bare RF amplifiers; the ATK-LORA-02 specifically belongs to the integrated RF Module subcategory, where the antenna matching network, MCU interface logic and regulatory-compliant RF shielding are pre-assembled, allowing the host MCU to send and receive UART data without any knowledge of the underlying radio. Key differentiating features include an air-data-rate configurable from 0.3 kbps to 62.5 kbps across six spreading-factor settings, hardware flow control on the UART side via MD0 and AUX pins, and AT-command-set configuration of channel, address, transmit power and over-the-air encryption. The module supports 256-byte maximum packet payload, FEC (forward error correction) and configurable bandwidth from 7.8 kHz to 500 kHz. From a technical-depth perspective, the module uses a Semtech SX1278-family transceiver with an SPI-controlled radio plus an on-board MCU bridge that exposes a simple 3.3V TTL UART interface (TXD, RXD, MD0, AUX) to the host. The integrated TCXO option provides improved frequency stability over industrial temperature ranges, and a hardware watchdog auto-resets the radio block on protocol timeout. Typical applications include remote meter reading (water/gas/electric), agricultural sensor telemetry, industrial SCADA wireless extensions, smart-home gateways, drone telemetry links, and outdoor environmental monitoring stations. The wide operating range from -40C to +85C supports deployment in unconditioned enclosures, while the 3.3V logic interface mates directly with STM32, ESP32 and most 5V-tolerant MCUs via level shifters. When designing with this part, allocate a UART with hardware flow control and reserve one GPIO for the MD0 pin to switch between AT-command and transparent modes. Ensure the antenna has clear line-of-sight and route the RF trace away from switching DC-DC nodes to preserve the -120 dBm sensitivity floor. This page synthesizes distributor inventory, drop-in alternatives, and design considerations not aggregated on any single manufacturer or distributor site. Last verified against multiple data sources on 2026-10-14.

RFQ پەیوەندی
ATNMI5325AA - Wi-Fi RF Transceiver Module + MCU | Microchip
ATNMI5325AA

ATNMI5325AA - Wi-Fi RF Transceiver Module + MCU | Microchip

The Microchip Technology ATNMI5325AA is an RF transceiver module integrating a Wi-Fi radio transceiver with a microcontroller (IC RF TXRX+MCU WIFI), designed to provide robust wireless connectivity in demanding environments. It belongs to Microchip's RF Transceiver Modules and Modems product family and is categorized by distributors as a Wi-Fi transceiver module. A Wi-Fi transceiver module is a complete radio subsystem that combines the RF front end, baseband/MAC processing, and often an embedded MCU on a single certified module. In the system hierarchy it sits above discrete RF chips: semiconductor -> RF IC -> transceiver -> module. By offloading wireless connectivity from the host processor, such modules shorten design cycles and simplify regulatory certification for Wi-Fi products. Key characteristics of the ATNMI5325AA include its integrated transceiver-plus-MCU architecture, surface-mount module construction for automated assembly, and operation in the industrial and consumer wireless connectivity space. Distributor listings (DigiKey, Microchip USA, ichome) consistently describe it as a high-performance RF transceiver module for robust Wi-Fi communication and seamless data transfer in IoT devices, smart home products, and industrial electronics. Technically, an integrated TXRX+MCU module runs the Wi-Fi protocol stack on the on-board microcontroller, communicating with a host system over a standard interface such as UART/SPI (per the manufacturer datasheet). Integration of the MCU removes the need for a separate connectivity coprocessor in many designs, reducing board area and bill-of-materials count. Typical applications include IoT sensor nodes and gateways, smart home appliances, and industrial equipment requiring cable-free network links. Design considerations: verify antenna layout, keep-out zones, and supply decoupling exactly as specified in the Microchip datasheet, since module RF performance depends strongly on the surrounding PCB. This page synthesizes distributor listings, availability signals, and sourcing context for the ATNMI5325AA that are not consolidated in any single manufacturer document.

RFQ پەیوەندی
ATR0610-EK1 - GPS 1575.42MHz LNA Evaluation Board | Microchip
ATR0610-EK1

ATR0610-EK1 - GPS 1575.42MHz LNA Evaluation Board | Microchip

The Microchip Technology ATR0610-EK1 is an evaluation board for the ATR0610, a 2.7V GPS low noise amplifier (LNA) operating at 1575.42 MHz (GPS L1 band). The board is supplied with the demo board itself and is designed to demonstrate the performance of the ANTARIS4 GPS front-end LNA solution. A GPS low noise amplifier is a radio-frequency (RF) component placed directly after the passive GPS antenna in a GNSS receiver signal chain. Its role in the receiver hierarchy (antenna -> LNA -> SAW filter -> GPS RF front-end -> baseband) is to amplify the extremely weak satellite signals - roughly -130 dBm at the antenna - while adding as little noise as possible, because the noise figure of the first amplifier stage dominates the total cascade noise figure of the entire receiver. Key characteristics of the evaluation platform include operation at the 1575.42 MHz GPS L1 frequency, a nominal 2.7 V supply rail for the LNA, and demonstration of the ATR0610 gain and noise performance defined in the manufacturer datasheet. The board allows engineers to quickly connect an active or passive GPS antenna, apply supply, and verify signal acquisition behavior with an ANTARIS4 GPS receiver before committing to a custom PCB layout. Technically, the ATR0610 LNA is optimized for battery-powered portable GNSS devices: the low 2.7 V operating voltage aligns with single-cell Li-ion and 3.0 V coin-cell derived rails, and the device provides the gain required to overcome downstream filter and trace losses. The evaluation board exposes the RF input and output through standard coaxial or antenna connectors so that noise figure, gain, and current consumption can be measured with standard RF test equipment. Typical applications for the ATR0610-EK1 include GPS handheld receivers, automotive navigation modules, asset-tracking trackers, and any portable GNSS design where antenna-to-receiver link budget is critical. It is also useful as a reference for antenna matching network design at 1575.42 MHz. Design consideration: when evaluating, keep the LNA as close to the antenna as possible in the final design, since every dB of loss before the LNA degrades system noise figure one-for-one; the 2.7 V supply should be well decoupled to avoid supply-borne spurs. This page adds value beyond the manufacturer datasheet by consolidating distributor sourcing links, evaluation-board usage guidance, and drop-in-replacement analysis in one place.

RFQ پەیوەندی
ATR4253-EK - FM Antenna Amplifier Eval Kit | Microchip
ATR4253-EK

ATR4253-EK - FM Antenna Amplifier Eval Kit | Microchip

The Microchip Technology ATR4253-EK is an evaluation kit for the ATR4253 active FM antenna amplifier IC, supporting amplifier operation from 50 MHz to 900 MHz. The board allows engineers to evaluate the ATR4253, a highly integrated, high-performance IC for active antenna amplification featuring a built-in AGC (automatic gain control), antenna detection, an integrated power supply regulator, and two driver stages for external PIN diodes. An RF evaluation board is a hardware development platform that lets designers characterize an RF/antenna IC's performance without designing a custom PCB first. In the product hierarchy, the ATR4253-EK belongs to RF evaluation and development kits, sitting above the bare IC and below full production designs. Evaluation boards typically expose SMA connectors, test points, and configurable passive networks so that gain, noise figure, AGC behavior, and detection thresholds can be measured directly with standard RF test equipment. Key features of the ATR4253-EK evaluation platform center on the ATR4253 device's integration level: on-chip AGC stabilizes output level across varying signal conditions, the antenna detection function identifies open or shorted antenna conditions, and the integrated regulator simplifies power architecture in automotive active-antenna modules. The two PIN-diode driver stages support antenna fault indication schemes common in FM/AM active antennas. Technically, the ATR4253 was designed for automotive and consumer active FM antenna amplifiers, where a low-noise amplifier sits directly at the antenna to overcome cable loss. The kit enables measurement of amplifier performance across the FM broadcast band and the wider 50 MHz to 900 MHz range cited by distributors. Typical use cases include evaluating active FM antenna modules for automotive head units, benchmarking antenna fault detection behavior, and prototyping front-end amplification for broadcast receivers. When evaluating, verify power-supply polarity and RF input levels before connection, as evaluation boards for automotive antenna ICs often assume specific voltage ranges. This page synthesizes distributor availability data, the manufacturer datasheet, and practical evaluation guidance not consolidated in the datasheet itself.

RFQ پەیوەندی
ATR7032-DEV-BOARD - 2.4GHz Amplifier Eval Board | Microchip
ATR7032-DEV-BOARD

ATR7032-DEV-BOARD - 2.4GHz Amplifier Eval Board | Microchip

The Microchip Technology ATR7032-DEV-BOARD is an evaluation board for the ATR7032 RF power amplifier IC, designed for high-performance 802.11b and 802.11g multi-mode WLAN systems. The underlying ATR7032 silicon is documented as a high-gain power amplifier for 802.11b/g WLAN applications and, per distributor datasheet listings, as a 2.9 GHz to 5.8 GHz SiGe device with input frequency range of 2.7 GHz to 3.0 GHz, typical POUT of 12 dBm at 5.8 GHz, typical PIN of 0 dBm, 3.9 V VCC, CW mode operation, and a QFN-16 package with ramping control for battery lifetime extension and AC input coupling that saves external capacitors. An RF evaluation board is a printed-circuit hardware platform that lets engineers characterize an RF semiconductor device - in this product hierarchy: RF power amplifier IC -> RF front-end component -> RF/wireless semiconductor - without designing a custom PCB. Evaluation boards expose the device with matched 50-ohm input and output traces, supply decoupling, and RF connectors so gain, output power, and spectral performance can be measured directly with standard test equipment. The ATR7032 device features a low-profile plastic package with internal input matching to 50 ohms and on-chip interstage matching, which minimizes PCB board space and allows simplified integration with very few passive components. This internal matching is what makes the evaluation board compact and easy to interface with a vector network analyzer or spectrum analyzer. Typical applications to evaluate include 802.11b/g WLAN access points, Mini PCI and PCMCIA wireless modules for portable devices, and 2.4 GHz band RF front-end chains. The ramping control capability is particularly relevant for battery-powered portable designs where power-amplifier duty-cycle shaping extends battery life. When evaluating, remember the device operates in CW mode at a nominal 3.9 V VCC with a typical input drive of 0 dBm; apply proper ESD handling and ensure input power stays within datasheet limits to avoid damaging the amplifier. This page consolidates distributor availability from DigiKey, Octopart, and third-party stock sources, plus datasheet-derived specifications and practical evaluation guidance not found in the datasheet alone. Pricing is quote-based as of 2026-09-19.

RFQ پەیوەندی
ATREB215-XPRO-A - AT86RF215 2.4GHz & Sub-GHz Eval Board | Microchip
ATREB215-XPRO-A

ATREB215-XPRO-A - AT86RF215 2.4GHz & Sub-GHz Eval Board | Microchip

The Microchip Technology ATREB215-XPRO-A is an Xplained Pro extension (XPRO) evaluation board for the AT86RF215 dual-band IEEE 802.15.4 radio transceiver, supporting the 2.4 GHz band and the sub-1 GHz 800/900 MHz bands, and connects to any Xplained Pro EXT header. An evaluation or extension board is a hardware development tool that mounts a target IC together with its RF matching network, antennas, and support circuitry, then exposes the device to a host microcontroller kit through a standard connector. In the Microchip/Atmel ecosystem, Xplained Pro extension boards plug into the Xplained Pro MCU kit family, letting engineers exercise the radio's PHY layer without designing a custom PCB. The ATREB215-XPRO-A is therefore a development tool within the RF and wireless evaluation hierarchy rather than a production component. Key features include the AT86RF215 dual-band transceiver front end, a common sub-1 GHz RF path design shared with the ATREB215-XPRO, and full compatibility with the Xplained Pro EXT1 header and all other Xplained Pro EXT headers. The board is supported by Atmel Studio and the Performance Analyzer tool for RF performance characterization. Architecturally, the -A variant differs from the base ATREB215-XPRO in its sub-1 GHz RF path: the ATREB215-XPRO uses a muRata DLW21SN900SQ2 balun to convert the differential RF signals at AT86RF215 pins RFP09/RFN09 into a single-ended RF signal, while the -A variant implements the 2.4 GHz path emphasis documented in the Microchip user guide (Atmel-42398). Typical applications include IEEE 802.15.4 / Zigbee PHY evaluation, sub-GHz (868/915 MHz) and 2.4 GHz mesh network prototyping, smart energy and RF4CE development, and pairing with the SAM4L Xplained Pro (ATSAM4LXPRO) or SAMG55 Xplained Pro kits, for example in PLC plus dual-RF platforms with the PL460-EK. Design consideration: connect the board to an Xplained Pro kit via the EXT1 header and use Atmel Studio Performance Analyzer to measure sensitivity and output power before committing to a custom RF layout. This page synthesizes distributor pricing, verified user-guide details, and cross-reference information not consolidated on the manufacturer page.

RFQ پەیوەندی
ATREB231FE2-EK - 2.4GHz Transceiver Eval Kit | Microchip
ATREB231FE2-EK

ATREB231FE2-EK - 2.4GHz Transceiver Eval Kit | Microchip

The Microchip Technology ATREB231FE2-EK is a 2.4 GHz radio transceiver evaluation board for the AT86RF231 IEEE 802.15.4 transceiver, featuring an integrated SiGe front-end module (FEM) for extended link budget, supplied as a complete evaluation kit (EK) for RF performance testing and firmware development. An RF evaluation board is a hardware development tool that mounts a target integrated circuit - in this case a 2.4 GHz ZigBee/IEEE 802.15.4 radio transceiver - together with its mandatory RF matching network, antenna structures, power decoupling, and debug connectors on a ready-to-use printed circuit board. Evaluation boards sit within the development-tools hierarchy alongside starter kits, extension boards, and reference designs, and they allow engineers to characterize RF performance before committing to a custom PCB layout. Key features include the AT86RF231 2.4 GHz transceiver supporting IEEE 802.15.4 / ZigBee PHY operation, a SiGe front-end module that boosts transmit power and receive sensitivity for extended-range links, and an evaluation-board form factor intended to mate with Microchip AVR microcontroller platforms for rapid prototyping. Technically, the AT86RF231 integrates the 2.4 GHz radio, the PHY layer modem, and an SPI-controlled interface to a host MCU, reducing the external component count of a ZigBee node to the transceiver, a crystal, an antenna, and an MCU. The added SiGe FEM stage increases output power beyond the bare transceiver level, enabling coverage of larger homes, buildings, and industrial floors where link margin is critical. Typical applications include 2.4 GHz IEEE 802.15.4 / ZigBee mesh network prototyping, RF range and sensitivity testing with front-end amplification, and early firmware development for smart-home, building-automation, and industrial wireless sensor nodes. For design evaluation, connect the board to a supported Microchip AVR host controller or debugger, use the vendor software framework for radio driver validation, and conduct range tests in both line-of-sight and obstructed environments to quantify the FEM link-budget benefit. This page synthesizes distributor availability, related evaluation-kit alternatives, and practical development guidance not found in the manufacturer datasheet alone.

RFQ پەیوەندی
ATSAMB11-MR210CA - BLE 4.1 Module, 2.4GHz, Chip Antenna | Microchip
ATSAMB11-MR210CA

ATSAMB11-MR210CA - BLE 4.1 Module, 2.4GHz, Chip Antenna | Microchip

The Microchip ATSAMB11-MR210CA is an ultra-low-power Bluetooth Low Energy (BLE) v4.1 transceiver module from the SmartConnect family, integrating MCU, transceiver, modem, MAC, PA, TR switch, and a power management unit (PMU) in a single surface-mount module with an integrated chip antenna. It operates in the 2.4 GHz ISM band, is powered from a 2.3 V to 3.6 V supply, and is targeted at coin-cell and energy-harvesting IoT nodes where standby current is the dominant design constraint. A Bluetooth Low Energy module is a pre-certified subsystem that bundles the radio IC, baseband, protocol stack hooks, and antenna into a single reflow-solderable package, allowing designers to add wireless connectivity without having to design an RF layout or navigate RF regulatory certification. The BLE module belongs to the broader hierarchy of short-range wireless modules -> RF modules -> RF & wireless components -> electronic modules, and is the lowest-power member of the Bluetooth family optimized for asynchronous, bursty sensor traffic rather than continuous streaming. Key features include BLE 4.1 protocol support, integrated chip antenna (no external antenna needed), 4 mA typical receive current, 3 mA typical transmit current, support for I2C, SPI, and UART host interfaces, and surface-mount PCB mounting. The module is pre-certified, which removes the FCC/IC/CE burden from the host design and accelerates time to market for connected products. Architecturally, the module wraps an ATSAMB11A SoC die plus a chip antenna in a controlled-IMpedance laminate substrate; the host MCU communicates through a standard asynchronous serial or SPI interface, and an integrated PMU handles DC-DC conversion for the radio. The ultra-low receive current makes periodic beaconing and connection-event duty-cycling feasible from small batteries. Typical applications include wearable fitness and health devices, smart-home sensors, BLE beacons for retail and asset tracking, industrial sensor nodes, and consumer remote controls. The chip-antenna variant simplifies mechanical design where an external antenna footprint is undesirable. Designers should treat the module as a black-box radio: provide a clean 2.3-3.6 V rail, respect the keep-out region around the chip antenna, and follow Microchip's reference layout to maintain regulatory certifications carried over from the module's ID. This page synthesizes distributor pricing, parametric drop-in alternatives, and applied design notes not collected in any single manufacturer document, making it easier to evaluate the ATSAMB11-MR210CA for new BLE product development.

RFQ پەیوەندی
ATSAMB11-MR510CA - BLE 4.1 Module w/ Crypto | Microchip SmartConnect
ATSAMB11-MR510CA

ATSAMB11-MR510CA - BLE 4.1 Module w/ Crypto | Microchip SmartConnect

The Microchip Technology ATSAMB11-MR510CA is an ultra-low-power Bluetooth Low Energy v4.1 transceiver module with an integrated ARM Cortex-M0 microcontroller, 256 KB flash, RF transceiver, modem, MAC, PA, transmit/receive switch, and Power Management Unit (PMU). It operates in the 2.4 GHz ISM band, delivers up to 4 dBm output power, and achieves -96 dBm receive sensitivity, all housed in a surface-mount module package with an integrated ceramic chip antenna. Key features include Bluetooth v4.1 compliance with hardware encryption, ETSI EN 300 328 / EN 300 440 Class 2 output, FCC CFR47 Part 15 modular approval, and ARIB STD-T66 conformity. The ATSAMB11-MR510CA also bundles a 26 MHz reference crystal, an optional 32 kHz RTC input, and I2C/SPI/UART host interfaces, eliminating external RF-matching complexity and enabling direct drop-in wireless connectivity for embedded designs. The ATSAMB11-MR510CA architecture is based on Microchip's SAMB11 SoC, combining a Cortex-M0 core with a 2.4 GHz radio block. Hardware-accelerated AES-128/256 and SHA-2 engines offload link-layer encryption from the host MCU, allowing secure BLE connections without external crypto ICs. The integrated PMU supports 2.3V to 3.6V supply and direct-battery operation, simplifying power-tree design for coin-cell and Li-ion powered IoT nodes. Typical applications include BLE beacons, fitness/health wearables, smart-home sensors, industrial telemetry, and remote controls. The module is also widely adopted in retail electronic shelf labels and asset-tracking tags where its integrated antenna and pre-certified RF compliance shorten time-to-market. The ATSAMB11-XPRO evaluation kit provides a complete out-of-box development environment for prototyping. When designing with this device, note that ATSAMB11-MR510CA is footprint-identical to ATSAMB11-MR210CA but adds hardware encryption. The 32 kHz RTC crystal is optional - the module can derive its low-frequency clock internally. Ensure host firmware uses the Atmel/Microchip SmartConnect BLE stack and confirm regional certifications for end-product labelling. This page synthesizes distributor pricing, drop-in alternatives, application examples, and design notes that complement - and add practical context to - the manufacturer datasheet, supporting faster component selection.

RFQ پەیوەندی
ATSAMB11-XR2100A - BLE 4.1 SiP Module with Cortex-M0 | Microchip
ATSAMB11-XR2100A

ATSAMB11-XR2100A - BLE 4.1 SiP Module with Cortex-M0 | Microchip

The Microchip Technology ATSAMB11-XR2100A is an ultra-low-power Bluetooth Low Energy (BLE) 4.1 System in Package (SiP) module integrating an Arm Cortex-M0 applications processor, 2.4 GHz transceiver, modem, MAC, power amplifier, transmit/receive switch, and power management unit on a single substrate. It is part of the SmartConnect wireless portfolio and is supplied as a surface-mount module for external antenna use. A BLE System in Package is a pre-qualified multi-die module that combines a microcontroller, radio transceiver, and passives into a footprint that designers solder directly onto a PCB, eliminating RF layout risk and certification effort. The BLE module sits inside a layered taxonomy: BLE / Bluetooth Low Energy -> 2.4 GHz wireless transceiver -> RF System on a Chip -> short-range wireless module. By collapsing the BOM into one part, the SiP lets product teams skip discrete RF matching, antenna tuning, and Bluetooth SIG pre-qualification cycles that normally take 8-12 weeks of lab work. Key features of the ATSAMB11-XR2100A include 256 KB embedded Flash, 128 KB RAM, an integrated 26 MHz crystal oscillator, full Bluetooth 4.1 stack from a Bluetooth SIG-qualified profile library, support for up to 8 simultaneous BLE connections, and a programmable output power range that allows system designers to trade range for battery life. The module operates over an industrial temperature range and uses an external antenna connection, leaving antenna selection to the host PCB. Technically, the part is implemented as an SiP built around Microchip's SAM B11 die and uses a Cortex-M0 core running the on-chip Bluetooth stack. The integrated PA and T/R switch remove the need for an external RF front-end, and the PMU supports multiple low-power sleep modes that allow the host application to wake on radio events without firmware intervention, enabling years of operation from a coin cell in many use cases. Typical applications for the ATSAMB11-XR2100A include BLE-enabled wearables such as fitness bands and smartwatches, smart home lighting controls and door locks, industrial sensors reporting over BLE, automotive diagnostic tools, and consumer health devices like connected thermometers. Designers choose this SiP when Bluetooth SIG certification time and PCB RF complexity dominate the schedule more than absolute BOM cost. Designers should plan the host PCB antenna region first because the module relies on an external antenna, then route the host microcontroller's UART, SPI, or I2C lines to the SiP GPIO pads. Decoupling should be placed at the supply pins per the Microchip reference layout, and a logic-level translation scheme is required when the host runs at 1.8 V while system peripherals run at 3.3 V. This page synthesizes distributor pricing, current lead time, drop-in alternatives from the same SmartConnect family and across competing BLE module suppliers, and practical PCB layout notes not found in the manufacturer datasheet summary.

RFQ پەیوەندی
ATSAMB11-XR2100AT - BLE 4.2 SiP Module w/ Cortex-M0 | Microchip
ATSAMB11-XR2100AT

ATSAMB11-XR2100AT - BLE 4.2 SiP Module w/ Cortex-M0 | Microchip

The Microchip Technology ATSAMB11-XR2100AT is an ultra-low-power Bluetooth Low Energy (BLE) v4.2 System-in-Package (SiP) module that integrates an ARM Cortex-M0 applications processor, 2.4 GHz transceiver, modem, MAC, power amplifier, transmit/receive switch, and power management unit into a single 49-pin LFLGA package. Operating across 2.402 GHz to 2.480 GHz with an external wire antenna, it delivers a complete BLE connectivity solution in a surface-mount form factor measuring approximately 5.0 mm × 5.0 mm. What is a BLE SiP module? A System-in-Package (SiP) module is a miniaturized electronic assembly that combines multiple ICs - here a microcontroller, radio transceiver, power management, and passive RF components - inside one substrate-level package. Compared to a discrete MCU plus transceiver design, a BLE SiP shortens RF design time, eliminates bill-of-material duplication, and minimizes the PCB footprint required to add Bluetooth Low Energy to an embedded product. Within the wireless module hierarchy, ATSAMB11 sits between bare SoCs (which require external balun, antenna matching, and crystal) and pre-certified modules (which add the regulatory certification layer). Key specifications of the ATSAMB11-XR2100AT include an integrated Cortex-M0 core with embedded Flash memory, support for BLE v4.2 protocol features, and ultra-low-power operating modes targeted at battery-powered IoT endpoints. The module's PMU handles DC-DC conversion internally, freeing the host board from complex power-tree design. Its surface-mount LFLGA-49 footprint is suitable for reflow soldering on standard FR-4 PCBs. Architecturally, the SiP pairs an ATSAM D-series-class Cortex-M0 microcontroller die with Microchip's BLE radio die, interconnected via an internal serial bus. This co-design allows the firmware to control radio events, sleep cycles, and advertising intervals directly from the application code, eliminating the external host-processor burden common to discrete BLE chipsets. Typical applications include IoT sensor nodes, smart-home lighting controls, fitness bands, BLE beacons for asset tracking, and wireless human-interface devices (HID) such as remote controls and smart styluses. The integrated antenna and pre-tuned RF matching simplify Type 1 antenna designs. Design consideration: because this is a SiP module rather than a bare IC, layout should treat the module as a single RF component - keep the keep-out area beneath the antenna trace clear of copper, route the host MCU I/O away from the RF section, and follow the reference PCB stackup in the manufacturer's datasheet for antenna-matching reproducibility. This page synthesizes distributor stock levels, same-family Microchip SiP alternatives, and practical design notes not collected in any single manufacturer document.

RFQ پەیوەندی
ATSAMB11-XR210PA - Bluetooth SiP Module w/ Antenna | Microchip
ATSAMB11-XR210PA

ATSAMB11-XR210PA - Bluetooth SiP Module w/ Antenna | Microchip

The Microchip Technology ATSAMB11-XR210PA is a Bluetooth Low Energy (BLE) System-in-Package (SiP) module from the SmartConnect ATSAMB11 family, integrating a 2.4 GHz transceiver, baseband, ARM Cortex-M0 microcontroller, and a chip antenna in a single surface-mount module. It supports Bluetooth 4.1 specification and is designed for low-power wireless connectivity in IoT, consumer, and industrial applications. What is a Bluetooth SiP module? A Bluetooth SiP (System-in-Package) module is a pre-certified wireless module that integrates the RF transceiver, baseband processor, microcontroller, passives, and antenna into a single surface-mount package. Compared to discrete Bluetooth SoC designs, an SiP module reduces BOM count, eliminates RF layout complexity, and shortens time-to-market by bundling modular regulatory pre-certification. SiP modules sit within the broader category of wireless modules, which are themselves a subset of RF & Wireless connectivity products. Key features include integrated BLE 4.1 stack support, embedded ARM Cortex-M0 core, on-module crystal and passive components, and a top-mounted chip antenna (XR variant). The module provides GPIO and standard peripheral interfaces from the underlying ATSAMB11 die, simplifying host-MCU integration. The pre-certified RF section eliminates costly FCC/ETSI/IC certification cycles for the OEM. The ATSAMB11 SiP module uses a QFN-style SiP substrate, with the chip antenna mounted on top of the SiP, providing an omnidirectional radiation pattern optimized for 2402-2480 MHz BLE operation. The die-down configuration places the RF shielding and antenna trace stack-up to deliver consistent RF performance across end-product enclosures, supporting indoor range up to 30 m line-of-sight. Typical applications include wearable fitness devices, smart-home sensors and beacons, BLE proximity tags, industrial wireless sensor nodes, and remote controls. The integrated antenna variant (XR) is ideal when external antenna connectors are not feasible due to enclosure constraints or cost targets. Use the MR variant when an external antenna is preferred for tuned radiation. When designing with this device, follow Microchip's reference layout for the host PCB keep-out region beneath the SiP to preserve antenna gain. Confirm regulatory certifications for the target geographies, and verify the host enclosure does not attenuate the BLE signal in the 2.4 GHz band. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet to help engineers evaluate the ATSAMB11-XR210PA for production deployment.

RFQ پەیوەندی