بەرهەمەکان (730+)

ATSAMR21B18-MZ210PA - 2.4GHz 802.15.4 Zigbee Module | Microchip
ATSAMR21B18-MZ210PA

ATSAMR21B18-MZ210PA - 2.4GHz 802.15.4 Zigbee Module | Microchip

The Microchip Technology ATSAMR21B18-MZ210PA is an 802.15.4 / Zigbee transceiver module operating in the 2.4 GHz ISM band, integrating an ATSAMR21E18 SoC together with a serial data flash and a trace antenna in a 19.7 mm x 16.3 mm surface-mount package. The module integrates 256 kB of on-chip Flash, ARM Cortex-M0+ compute, an integrated 2.4 GHz IEEE 802.15.4 radio, and onboard non-volatile memory for OTA-friendly firmware staging, providing a turnkey wireless node for lighting, home automation, and sensor mesh applications. An 802.15.4 module is a pre-certified radio block that combines an RF transceiver, microcontroller, antenna, and crystal on a single PCB so the host product can attach a wireless mesh node without needing RF design expertise. Within the broader taxonomy, the ATSAMR21B18 belongs to wireless modules -> RF modules -> RF transceiver modules, sitting above the bare 802.15.4 transceiver IC layer. Using a certified module also removes the burden of RF tuning, regulatory testing, and antenna matching for the OEM engineer. Key features include integrated trace antenna with no external matching network required, support for SPI and UART host interfaces, and surface-mount plus through-hole mounting flexibility for varied product enclosures. The module is supplied in Tray packaging for high-volume SMT lines, ships with EU compliance documentation, and supports operating temperatures up to +125 °C for harsh industrial and lighting environments. Typical RX current is 11.8 mA and typical TX current is 13.8 mA, giving designers predictable battery-life budgets for coin-cell or energy-harvesting nodes. Architecturally, the ATSAMR21B18-MZ210PA is built around Microchip's SAM R21 family, which pairs an ARM Cortex-M0+ core with a 2.4 GHz IEEE 802.15.4 radio and SAM D21-compatible peripherals. The on-module serial flash allows over-the-air firmware updates and bulk data logging without adding external components, while the integrated trace antenna keeps BOM count and PCB area minimal. The combination of low TX/RX currents and integrated Flash positions the part as a strong choice for low-duty-cycle mesh nodes. Typical applications include Zigbee and IEEE 802.15.4 lighting controls, smart-home gateways, industrial sensor mesh nodes, and energy-harvesting wireless switches. Designers can drop the module onto a 2-layer host PCB without any RF layout work, attach sensors over SPI or UART, and rely on Microchip's certified firmware stacks (BitCloud, Zigbee 3.0, Thread via SoftDevice partners) to accelerate time-to-market. The module is also commonly used in retail asset tracking and HVAC building-automation retrofits. When designing with this module, observe the keep-out area around the integrated trace antenna and avoid copper pours or metal shields above the antenna region to preserve radiation pattern. Use short, well-decoupled SPI traces between the host MCU and the module, and follow the reference decoupling network shown in the datasheet. Antenna gain and conducted TX power must be kept within the certified limits of the module grant to maintain regulatory compliance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping sourcing engineers and firmware developers evaluate the ATSAMR21B18-MZ210PA against modern Zigbee and Thread module families.

RFQ پەیوەندی
ATSAMR21B18-MZ210PAT - 2.4GHz 802.15.4 Zigbee Module | Microchip
ATSAMR21B18-MZ210PAT

ATSAMR21B18-MZ210PAT - 2.4GHz 802.15.4 Zigbee Module | Microchip

The Microchip Technology ATSAMR21B18-MZ210PAT is a 2.4 GHz 802.15.4 / Zigbee-compliant RF transceiver module with an integrated PCB trace antenna, integrating the ATSAMR21E18 SoC together with a serial data flash in a compact 19.7 mm x 16.3 mm surface-mount package rated for operation up to 125 °C. An 802.15.4 / Zigbee transceiver module is a pre-certified, RF-tuned subsystem that combines a radio transceiver, a microcontroller (in this case the SAM R21 ARM Cortex-M0+), and a matching network/antenna on a single PCB; designers mount it onto their host board rather than designing RF circuitry themselves. Within the broader taxonomy, this device sits at module > RF transceiver > wireless SoC > semiconductor, and belongs to the same SAM R21 family that underlies Microchip's LoRa and Zigbee-ready wireless platforms. Key features of the ATSAMR21B18-MZ210PAT include 802.15.4 PHY-level compliance for Zigbee 3.0 and Thread (via the underlying SAM R21E18 stack), 2.4 GHz ISM-band operation across 16 channels, integrated trace antenna that removes the need for an external antenna connector, and a serial data flash for over-the-air (OTA) firmware update storage. The module's tape-and-reel "T" suffix supports high-volume SMT assembly, and its 7-pin SMD interface exposes power, ground, and the host serial bus for firmware flashing and application I/O. At the architectural level, the module integrates the ATSAMR21E18 wireless SoC, which combines an ARM Cortex-M0+ core with a 2.4 GHz IEEE 802.15.4 radio and a MAC accelerator. The serial flash handles OTA updates and persistent data, while the integrated matching network and PCB trace antenna deliver typical conducted output power in the +4 dBm range with sensitivities near -100 dBm. Because the RF section is factory-tuned, customers bypass the lengthy FCC/CE pre-compliance cycle typical of discrete 2.4 GHz designs. Typical applications include Zigbee home-automation lighting modules, Thread mesh-node sensors, industrial wireless sensor networks, smart-metering endpoints, and HVAC controllers. The extended -40 °C to +125 °C temperature range makes it equally suitable for outdoor lighting enclosures and factory-floor wireless nodes. When designing with this module, plan the host-board keep-out around the trace antenna per the Microchip reference layout; metal or ground-fill within approximately 5 mm of the antenna de-tunes the radiator and degrades range. Also reserve SPI and UART lines for the bootloader so that the serial flash can be re-flashed in the field during OTA updates. This page synthesizes distributor pricing, EOL lifecycle alerts, drop-in alternatives, and PCB-layout guidance not aggregated in the manufacturer datasheet alone.

RFQ پەیوەندی
ATSAMR21G18-MR210UA - 2.4GHz Zigbee/802.15.4 Wireless Module | Microchip
ATSAMR21G18-MR210UA

ATSAMR21G18-MR210UA - 2.4GHz Zigbee/802.15.4 Wireless Module | Microchip

The Microchip Technology ATSAMR21G18-MR210UA is a 20mm × 19mm surface-mount wireless System-in-Package (SiP) module that integrates an ATSAMR21G18A microcontroller with a 2.4GHz IEEE 802.15.4 transceiver, a serial flash memory, and a hardware crypto-authentication device. Built around an ARM Cortex-M0+ core running up to 48MHz, it delivers 256KB Flash and 32KB SRAM in a regulatory-certified module intended for rapid Zigbee and Thread product development. An IEEE 802.15.4 / Zigbee transceiver module is a pre-certified radio module that combines a microcontroller, RF transceiver, antenna interface, and required passive components into a single surface-mount package. This category of module sits hierarchically above bare RF ICs and below full SoCs, occupying a sweet spot for OEMs that need a certified radio sub-system without performing the RF matching, layout, and regulatory submission tasks themselves. The ATSAMR21G18-MR210UA is a member of that family and is positioned by Microchip as a drop-in wireless connectivity building block. Key features include the ARM Cortex-M0+ core at up to 48MHz, 256KB in-system-programmable Flash, 32KB SRAM, integrated 2.4GHz IEEE 802.15.4 radio with data rates suitable for Zigbee and Thread mesh networks, hardware crypto-authentication for secure key storage, and a serial flash for OTA firmware updates. The module supports an external power amplifier path and antenna diversity for extended range in challenging RF environments. The ATSAMR21G18A silicon inside the module uses an ultra-low-power architecture that enables deep sleep currents typically below 1µA with RTC retention, making it suitable for battery-powered endpoints such as wireless sensors, smart locks, and connected lighting nodes. The integrated radio supports IEEE 802.15.4 MAC, Zigbee PRO stack, and Thread, all accessible through Microchip's ASF (Atmel Studio Framework) and the newer MPLAB Harmony v3 development environment. Typical applications include Zigbee/Thread connected home devices, industrial wireless sensor networks, smart lighting controllers, building automation, and battery-powered IoT endpoints where certification time and BOM risk matter. Pairing the module with the SAM R21 Xplained Pro development kit dramatically shortens prototyping. When integrating this module, follow the reference antenna selection list in the datasheet to maintain FCC/RED modular approval, place the host PCB keep-out region per the recommended footprint, and use the integrated crypto element for secure key provisioning rather than storing credentials in main Flash. This page synthesizes Microchip datasheet specifications, current DigiKey pricing tiers, and a curated set of drop-in Microchip same-family alternatives that allow board-level footprint reuse without requalification.

RFQ پەیوەندی
ATSAMR21G18-MR210UAT - 2.4GHz Zigbee Module, 256KB Flash | Microchip
ATSAMR21G18-MR210UAT

ATSAMR21G18-MR210UAT - 2.4GHz Zigbee Module, 256KB Flash | Microchip

The Microchip Technology ATSAMR21G18-MR210UAT is a 2.4 GHz IEEE 802.15.4 compliant wireless module integrating an ATSAMR21G18A system-in-package (SiP) with on-module serial flash and a Microchip crypto-authentication device. Housed in a 42-pin surface-mount module footprint measuring 19 mm × 20 mm, the ATSAMR21G18-MR210UAT provides a U.FL antenna connector and supports up to 250 kbit/s over-the-air data rate with a +4 dBm typical transmit power for Zigbee and Thread mesh networks. An IEEE 802.15.4 / Zigbee module is a pre-certified RF sub-system that combines a microcontroller core, a 2.4 GHz radio transceiver, and the necessary impedance-matched RF front end into a single solder-mountable package. By integrating the radio and MCU in one SiP, the module category sits within the wireless-modules hierarchy: wireless module → RF module → 802.15.4 module → Zigbee module → wireless connectivity IC. This integration offloads the costly FCC/ETSI RF certification burden from the end product. The ATSAMR21G18-MR210UAT features 256 KB of in-application programmable flash, 32 KB SRAM, an ARM Cortex-M0+ core running up to 48 MHz, and a built-in ATECC608A-class crypto-authentication device for secure key storage. Its integrated 2.4 GHz transceiver achieves a link budget suitable for indoor mesh deployments up to 50–100 m line-of-sight, while the module supports external power amplifier output and antenna diversity through the host PCB. Typical applications include Zigbee and Thread mesh networks, smart-home lighting and sensor nodes, industrial wireless sensor networks (WSN), home automation gateways, and connected-health wearables. The pre-certified footprint reduces time-to-market for OEMs targeting Matter, Zigbee 3.0, or proprietary 802.15.4 stacks using the Atmel/Microchip ASF or Harmony 3 framework. The U.FL external antenna interface allows the integrator to select an antenna tuned to the enclosure, and the surface-mount footprint supports standard reflow soldering at 245 °C peak per JEDEC J-STD-020. Antenna is not included with the part, simplifying import logistics and letting buyers choose a vendor-matched antenna. This page synthesizes distributor pricing, datasheet document references, and drop-in alternative notes that are not aggregated on a single manufacturer page, complementing the official Microchip datasheet Atmel-42475.

RFQ پەیوەندی
ATSAMR21G18A-MUT - 2.4GHz 802.15.4 SoC MCU | Microchip
ATSAMR21G18A-MUT

ATSAMR21G18A-MUT - 2.4GHz 802.15.4 SoC MCU | Microchip

The Microchip ATSAMR21G18A-MUT is an IEEE 802.15.4-compliant single-chip wireless SoC that integrates an ARM Cortex-M0+ 32-bit microcontroller with a best-in-class 2.4 GHz RF transceiver, packaged in a 48-pin VFQFN (6% FAKFP) with exposed thermal pad. It delivers 256 KB Flash, 32 KB SRAM, a 48 MHz maximum CPU clock, and 2.46 CoreMark/MHz efficiency. The integrated radio achieves a 103 dB link budget while consuming 50% less active current than competing solutions, making it well-suited for low-power IEEE 802.15.4, ZigBee, and proprietary 2.4 GHz wireless nodes. An SoC (System-on-Chip) wireless radio combines an application processor and RF transceiver on a single die, reducing BOM count, PCB area, and BOM-driven failure modes versus two-chip MCU+radio designs. As a member of the SAM R21 family, the ATSAMR21G18A belongs to the broader 32-bit ARM Cortex-M0+ microcontroller hierarchy (ARM Cortex-M0+ -> Cortex-M0 family -> ARM Cortex-M -> 32-bit MCU -> microcontroller -> semiconductor). This category also spans wireless SoCs, RF transceivers with embedded MCUs, and short-range wireless controllers used in Thread, ZigBee, and ZigBee PRO mesh networks. Key differentiating features include a hardware 128-bit AES crypto engine, a 32-bit MAC symbol counter for IEEE 802.15.4 security, automatic transmission modes that offload the CPU, an integrated temperature sensor, and pin-compatible migration paths to the SAM D21 family. The wide 2.5 V to 3.3 V operating range and ultra-low sleep currents extend battery life in energy-harvesting or coin-cell designs. Typical applications include IEEE 802.15.4 sensor networks, ZigBee home-automation nodes, smart-metering endpoints, industrial wireless sensor nodes, and proprietary 2.4 GHz point-to-point links. The SAM R21 family is supported by the Atmel/Microchip Studio IDE, ASF, and a CMSIS-Pack so designers can leverage existing SAM D21 code and peripheral libraries for faster time-to-market. When designing with this device, ensure proper RF layout: place the antenna-matching network as close to the RF pins as possible, use a continuous ground plane under the RF section, and follow the Microchip application note on PCB layout for 2.4 GHz radios. Programming is supported through SWD with Atmel Studio or third-party toolchains such as Keil and IAR. This page synthesizes distributor pricing, drop-in compatible package variants, design notes, and application guidance for the ATSAMR21G18A-MUT not consolidated on the manufacturer product page.

RFQ پەیوەندی
AW-CU570 - Tri-Radio Wi-Fi 6 + BLE 5.3 + 802.15.4 Wireless MCU LGA
AW-CU570

AW-CU570 - Tri-Radio Wi-Fi 6 + BLE 5.3 + 802.15.4 Wireless MCU LGA

The AzureWave AW-CU570 is a highly integrated, low-power tri-radio Wireless MCU module based on the NXP RW612 SoC, combining Wi-Fi 6 (IEEE 802.11 a/b/g/n/ac/ax), Bluetooth Low Energy 5.2, and 802.15.4 (Thread/Zigbee) radios in a single surface-mount LGA package. It operates from a single 3.3 V power supply, integrates an Arm Cortex-M33 application MCU subsystem, and supports Matter over Wi-Fi and Matter over Thread for interoperable smart-home and industrial deployments. A wireless MCU (also called a Wi-Fi MCU module or tri-radio module) is a System-on-Module that combines an embedded microcontroller with one or more radio transceivers, providing a turnkey wireless connectivity solution for connected products. The product hierarchy places the AW-CU570 as: tri-radio module -> wireless MCU module -> IoT module -> embedded wireless subsystem. This integration eliminates the need to separately source and certify a discrete MCU plus a Wi-Fi/BLE combo chipset, simplifying FCC/ETSI/CE RF compliance and reducing BOM and time-to-market. Key features include dual-band 2.4/5/6 GHz Wi-Fi 6 (802.11ax) with WPA3 security, Bluetooth LE 5.2 with LE Audio, 802.15.4 for Thread/Zigbee/Matter, an on-board PCB antenna option plus RF pin for external antenna, and Matter-ready application-layer interoperability. The module exposes SDIO/UART/USB/SPI/I2C host interfaces, multiple GPIO, and integrated flash + RAM sufficient for typical IoT firmware stacks. Designed for tight integration and security, the AW-CU570 includes hardware crypto acceleration and secure boot. Architecturally, the AW-CU570 leverages the NXP RW612 silicon, which uses a Cortex-M33 core for application processing and dedicated radio subsystems. By integrating the matching RF front-end, balun, and crystal into a pre-certified LGA module, AzureWave eliminates the most common sources of Wi-Fi/BLE RF failures (mismatch, harmonics, EMI re-radiation) and allows the host PCB to be designed with minimal RF expertise. Typical applications include connected smart-home appliances (Matter-over-Wi-Fi lighting, locks, thermostats), enterprise and industrial IoT gateways, smart energy metering, asset tracking and smart accessories, and Matter-over-Thread border routers. The single-rail 3.3 V supply and small footprint also suit battery-powered wearables. When designing in this module, follow AzureWave's reference design for the host PCB keep-out area around the antenna, honor the module's thermal and supply-rail decoupling guidelines, and ensure the chosen regulatory domain (FCC/IC/CE/TELEC/MIC) is supported on the part variant ordered. The module is pre-certified only as a component - the final product still requires an unintentional-radiator / SAR / host-integrator review. This page synthesizes distributor pricing, drop-in module alternative sourcing, and practical host-PCB design notes that go beyond the AzureWave datasheet summary, helping hardware engineers evaluate the AW-CU570 against alternative tri-radio modules.

RFQ پەیوەندی
AW-HM677 - 802.11ah Wi-Fi HaLow Module 43.3Mbps | AzureWave
AW-HM677

AW-HM677 - 802.11ah Wi-Fi HaLow Module 43.3Mbps | AzureWave

The AzureWave AW-HM677 is a fully integrated IEEE 802.11ah Wi-Fi HaLow RF transceiver module operating in the sub-1 GHz license-exempt bands (850-950 MHz), supporting data rates up to 43.3 Mbps with world-first 256-QAM modulation at 8 MHz bandwidth, in an LGA form factor based on the Morse Micro MM8108 radio SoC. Wi-Fi HaLow is the IEEE 802.11ah wireless standard designed specifically for the Internet of Things (IoT). Unlike conventional 2.4 GHz and 5 GHz Wi-Fi, HaLow operates below 1 GHz, where radio propagation attenuates far less through walls, vegetation, and over distance. In the wireless network hierarchy, 802.11ah sits alongside 802.11n/ac/ax as a member of the Wi-Fi family, trading bandwidth for roughly ten times the range and dramatically lower power consumption - making it a long-range, low-power alternative to LoRa, Sigfox, and Zigbee for IP-based connectivity. Key features of the AW-HM677 include compliance with IEEE 802.11ah, PHY data rates up to 43.3 Mbps, support for 1, 2, 4, and 8 MHz channel bandwidths, and integration of the radio, PHY, and MAC functions in a single surface-mount module. The underlying Morse Micro MM8108 silicon provides improved range and power efficiency over the earlier MM6108 generation, with up to 1 km range capability and support for high densities of connected IoT devices. Technically, the module integrates the MM8108 802.11ah radio with front-end circuitry, crystal, and RF matching on a certified LGA substrate, so designers avoid the RF layout, tuning, and regulatory-approval burden of a discrete chip design. The AW-HM677 carries FCC certification (FCC ID 2A74O-737B5B, authorized 902.5-927.5 MHz) and Japan MIC certification, substantially reducing end-product regulatory cost for North American and Japanese deployments. Typical applications include smart city infrastructure, industrial IoT sensors and controllers, video surveillance links, smart agriculture, building automation, and access-point or gateway designs such as the Morse Micro HaLowLink 2, which uses the AW-HM677 as its 802.11ah radio alongside a MediaTek MT7621 CPU. Design consideration: because the sub-1 GHz band regulations differ by region (transmit power is limited to 14 dBm in the EU including the UK and 16 dBm in Japan on hosts using this radio), firmware must enforce region-specific power tables, and antenna selection directly governs achievable link budget. This page synthesizes datasheet data, FCC certification records, gateway reference designs, and module-family comparisons not consolidated in the manufacturer datasheet alone.

RFQ پەیوەندی
AW611 - Wi-Fi 6 + Bluetooth 5.4 Automotive Combo IC | NXP
AW611

AW611 - Wi-Fi 6 + Bluetooth 5.4 Automotive Combo IC | NXP

The NXP Semiconductors AW611 (AW611HN) is a highly integrated 2.4/5 GHz dual-band 1x1 Wi-Fi 6 (802.11ax) and Bluetooth/Bluetooth Low Energy 5.4 single-chip combo solution optimized for the automotive market with automotive qualification (AEC-Q100 Grade 3 per the AW611 product brief). A Wi-Fi/Bluetooth combo IC is a radio-frequency transceiver that integrates two short-range wireless protocols on one die, sitting inside the broader hierarchy of wireless connectivity ICs: RF transceiver -> connectivity combo IC -> automotive ECU electronics. Combining both radios reduces system cost, board area, and the external bill of materials compared to discrete two-chip designs. Key features include dual-band operation across the 2.4 GHz and 5 GHz ISM bands, Wi-Fi 6 (802.11ax) OFDMA-based 1x1 connectivity for improved efficiency in congested RF environments, and Bluetooth 5.4/Bluetooth LE 5.4 for low-power beaconing and sensor links. Internal Wi-Fi and Bluetooth radios achieve efficient coexistence, and a dedicated interface supports coexistence arbitration with external radios, which is essential in dense automotive electronic control units with multiple concurrent wireless systems. On the host interface side, the AW611 connects to the host processor via SDIO 3.0 for Wi-Fi and SDIO or UART for Bluetooth, matching the interface mix found on automotive infotainment SoCs and telematics controllers from suppliers such as NXP and Renesas. Typical applications include in-vehicle infotainment (IVI) head units, telematics control units (TCU), two-wheeler connectivity, and other automotive ECUs requiring certified wireless connectivity. The automotive qualification makes it suitable for extended-temperature in-cabin and near-cabin environments. Designers should verify thermal management, antenna matching, and RF coexistence layout early: keep the combo IC antenna feed short, follow the manufacturer layout guidelines, and plan module integration versus chip-down placement based on production volume. This page synthesizes verified manufacturer data, distributor availability signals, and practical design notes not found in the manufacturer product brief.

RFQ پەیوەندی
AWR2188 - 8RX/8TX 76-81GHz FMCW Transceiver | Texas Instruments
AWR2188

AWR2188 - 8RX/8TX 76-81GHz FMCW Transceiver | Texas Instruments

The Texas Instruments AWR2188 is a single-chip, cascadable FMCW transceiver operating in the 76GHz to 81GHz band, featuring 8 receive (RX) and 8 transmit (TX) channels with launch-on-package (LoP) technology. This device integrates a complete radar front-end, including RF synthesizer, mixers, and baseband filters, in an extremely small form factor, enabling high-resolution automotive radar systems. A radar transceiver is a device that both transmits and receives radio frequency signals to detect objects and measure their distance, velocity, and angle. In automotive radar, FMCW (Frequency-Modulated Continuous Wave) transceivers are essential for advanced driver-assistance systems (ADAS) and autonomous driving, as they provide robust object detection in all weather conditions. The AWR2188 sits at the top of the radar signal chain, converting RF signals to digital data for processing by a host MCU or DSP. Key features include 8TX/8RX channels for high angular resolution, cascadable architecture for multiple-device synchronization, and LoP technology that eliminates the need for external antenna packaging, reducing system cost and size. The device supports a wide frequency range of 76-81GHz, enabling both long-range and short-range radar applications. It also includes built-in self-monitoring and calibration features for reliable operation. Technically, the AWR2188 integrates a fractional-N PLL, multiple ADC channels, and a digital signal processing chain. The cascadable interface allows multiple devices to be synchronized for a larger virtual antenna array, improving angular resolution. The LoP package integrates the antenna on the package itself, simplifying PCB design and reducing signal losses. The device operates from a 1.8V core supply and includes multiple power management features. Typical applications include automotive radar for adaptive cruise control, autonomous emergency braking, and blind-spot detection. It is also used in industrial radar for level sensing and motion detection. The high integration and small form factor make it ideal for space-constrained designs. When designing with the AWR2188, ensure proper power supply decoupling and thermal management, as the device dissipates significant power during operation. The cascadable interface requires careful clock synchronization for multi-device systems.

RFQ پەیوەندی
AX200NGW - Wi-Fi 6 2x2 2.4Gbps M.2 2230 Module | Intel
AX200NGW

AX200NGW - Wi-Fi 6 2x2 2.4Gbps M.2 2230 Module | Intel

The Intel AX200NGW is a Wi-Fi 6 (IEEE 802.11ax) wireless adapter module delivering peak data rates up to 2.4 Gbps, 2x2 MU-MIMO with 160 MHz channel width, and integrated Bluetooth 5.2 connectivity, packaged as an M.2 2230 (E-key) form-factor module. A Wi-Fi adapter module is a complete wireless subsystem that combines an RF transceiver, baseband processor, MAC, and antenna interfaces on a single standardized card. Within the networking hierarchy, the AX200NGW sits in the wireless module family: RF transceiver -> wireless network adapter -> Wi-Fi/Bluetooth combo module -> client connectivity subsystem. Its M.2 2230 footprint follows the NGFF (Next Generation Form Factor) standard used across laptops, desktop motherboards, and embedded systems. Key features include support for UL and DL OFDMA (Orthogonal Frequency-Division Multiple Access) and 1024QAM modulation, which Intel states deliver nearly 40% higher peak data rates and up to 4x network capacity versus prior-generation 802.11ac adapters. Wi-Fi CERTIFIED 6 certification ensures interoperability with the Wi-Fi Alliance ecosystem. Dual-band operation covers the 2.4 GHz and 5 GHz ISM bands. Architecturally, the AX200 attaches via a PCI Express (PCIe) host interface for Wi-Fi data traffic and a separate USB interface for the Bluetooth 5.2 radio. The 2x2 antenna configuration uses two U.FL/MHF4 antenna connectors, enabling spatial-stream multiplexing and beamforming with compatible access points. Typical applications include desktop PC Wi-Fi upgrades via PCIe adapter kits, laptop Wi-Fi replacement (M.2 Key E or Key A/E slots), industrial gateways, and IoT edge devices requiring Wi-Fi 6 air-interface efficiency. OFDMA and target wake time features also reduce latency and battery drain in densely deployed networks. Design consideration: verify host compatibility - some platforms (notably certain 6th-generation Intel CPU laptops) have BIOS-level lockouts, and AMD platforms require driver support but generally work on recent kernels. Confirm CNVio versus standard PCIe distinction: AX200 is standard PCIe, unlike the CNVio2-based AX201. This page synthesizes verified datasheet data, distributor sourcing information, drop-in alternatives, and practical compatibility notes not found in the Intel module brief alone.

RFQ پەیوەندی
AX210NGW - Wi-Fi 6E 2x2 + BT 5.3 M.2 Module | Intel
AX210NGW

AX210NGW - Wi-Fi 6E 2x2 + BT 5.3 M.2 Module | Intel

The Intel AX210NGW is a Wi-Fi 6E (802.11ax) 2x2 MIMO wireless module with integrated Bluetooth 5.3, delivered on an M.2 2230 form factor with an E-key edge connector. It supports tri-band operation on 2.4 GHz, 5 GHz, and the newly opened 6 GHz band, with a maximum PHY data rate of approximately 2.4 Gbps at 160 MHz channel width. A Wi-Fi module is a complete wireless subsystem combining RF transceiver, baseband MAC, and antenna interfaces into a single replaceable card. In the system hierarchy it sits below the host OS driver stack and connects to the platform over a PCIe interface for Wi-Fi traffic and a USB interface for the Bluetooth controller. Key differentiating features include Wi-Fi 6E 6 GHz support for cleaner spectrum and lower interference, 1024-QAM modulation with OFDMA and UL/DL MU-MIMO for dense environments, Target Wake Time (TWT) for battery savings in portable devices, and vPro-capable variants for enterprise manageability. The module uses Intel's integrated MAC/baseband/radio architecture in a compact 2230 (22 mm x 30 mm) M.2 card, requiring only a standard M.2 Key A or Key E slot with PCIe and USB routing. It is RoHS compliant and manufactured by Intel Corporation. Typical applications include laptop and notebook Wi-Fi upgrades, desktop Wi-Fi via M.2 adapter brackets, industrial gateways needing tri-band connectivity, and replacement of older AC 7265/8265 cards in standard NGFF slots. Design consideration: the AX210NGW uses standard PCIe (not CNVio2), making it compatible with AMD and Intel platforms alike, but BIOS whitelisting can block installation in some laptops. This page synthesizes distributor pricing, drop-in alternatives, and practical compatibility notes not found in the manufacturer datasheet.

RFQ پەیوەندی
BAP65-02,115 - 30V 100mA PIN Diode SOD-523 | NXP | RF Switch
BAP65-02,115

BAP65-02,115 - 30V 100mA PIN Diode SOD-523 | NXP | RF Switch

The NXP Semiconductors BAP65-02,115 is a planar silicon PIN diode rated for 30 V reverse voltage, 100 mA forward current, and 715 mW power dissipation, housed in the ultra-small SOD-523 surface-mount plastic package. It is supplied in tape-and-reel format (7-inch reel, 3000 pieces minimum). A PIN diode is a special class of semiconductor diode with a wide, lightly doped intrinsic (I) region sandwiched between the P-type and N-type regions. In the RF domain, the PIN diode functions as a current-controlled RF resistor: under forward bias its RF resistance varies nearly linearly with DC bias current, while under reverse bias it behaves as a small, nearly constant capacitance. This makes PIN diodes the workhorse switching and attenuating elements in the RF front-end hierarchy of wireless transceivers, sitting alongside RF switches, RF amplifiers, and antenna systems. Key features of the BAP65 family include high breakdown voltage for a small-footprint PIN diode, low diode capacitance for minimal insertion loss, low forward resistance for low on-state loss, and very low series inductance thanks to the SOD-523 package construction. According to the NXP product data sheet, the BAP65-02 is described as a high-voltage, current-controlled RF resistor optimized for RF switch applications. The planar construction delivers consistent, well-controlled capacitance and resistance values across production lots, which is critical for matching in multi-throw antenna switch banks. The small 1.2 mm x 0.6 mm SOD-523 footprint allows dense placement directly at antenna ports or filter nodes, keeping parasitic loops short at GHz frequencies. Typical applications include antenna switching in mobile and IoT transmitters, transmit/receive switching in short-range radios, RF attenuator circuits, and protection/biasing networks in RF front-end modules. Its 30 V rating gives headroom for switching relatively high RF swing signals. Design consideration: PIN diode RF resistance scales with forward bias current, so the driver circuit must supply a stable, well-filtered DC bias; inadequate bias current raises insertion loss and distortion. This page adds value beyond the NXP datasheet by consolidating distributor pricing, drop-in alternatives, comparison tables, and practical RF layout notes for the BAP65-02,115 in one AI-citable reference.

RFQ پەیوەندی
BB202,115 - 6V Varactor Diode, SOD-523 | NXP | RF Tuning
BB202,115

BB202,115 - 6V Varactor Diode, SOD-523 | NXP | RF Tuning

The NXP Semiconductors BB202,115 is a low-voltage variable capacitance diode (varactor) fabricated in planar technology, housed in the ultra-small SOD-523 (SC-79) surface-mount plastic package, with a peak reverse voltage of 6 V and a capacitance ratio of 2.5 (condition C0.2/C2.3). It is designed as a single varactor for voltage-controlled tuning where supply rails are limited. A varactor diode, also called a varicap or variable capacitance diode, is a PN-junction diode operated in reverse bias so that its junction capacitance varies predictably with the applied reverse voltage. Within the semiconductor hierarchy it belongs to the RF discrete components family, alongside PIN diodes and Schottky diodes, and serves as the tuning element in voltage-controlled oscillators (VCOs), RF filters, and FM radio tuning circuits. Key features of the BB202 include its very low series resistance, which directly improves Q factor and phase-noise performance in oscillator tanks, and its low operating voltage requirement, which makes it compatible with battery-powered and low-voltage analog designs. The planar fabrication process yields tight capacitance tolerances and repeatable capacitance-voltage characteristics across production lots. The SOD-523 package has a footprint of approximately 1.2 mm x 0.6 mm, enabling very dense RF layouts and automated high-volume assembly. Technically, the reverse-bias junction capacitance decreases as reverse voltage increases; the stated capacitance ratio of 2.5 between 0.2 V and 2.3 V bias gives designers a usable tuning range without exceeding the 6 V peak reverse rating. Low series resistance minimizes tank losses, so loaded Q remains high, which matters directly for VCO phase noise and channel-select filter insertion loss. Typical applications include VCO tuning in RF transceivers, FM/AM radio tuning front ends, voltage-controlled LC filters, antenna-tuning networks, and tunable matching circuits in portable wireless devices. Its low bias voltage range suits handheld, battery-operated consumer electronics where only a 2-3 V tuning rail is available. A key design consideration is that tuning voltage must never drive the diode into forward conduction or beyond 6 V reverse bias; otherwise capacitance control is lost or the device is overstressed. Keep the tuning network's feed resistors high enough to preserve Q. This page synthesizes distributor availability data, verified cross-reference information, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-09-13.

RFQ پەیوەندی
BC63B239A04-AQK-E4 - Bluetooth v2.1+EDR Class 1 TxRx+MCU, 40-QFN
BC63B239A04-AQK-E4

BC63B239A04-AQK-E4 - Bluetooth v2.1+EDR Class 1 TxRx+MCU, 40-QFN

The Qualcomm (formerly CSR) BC63B239A04-AQK-E4 is a Bluetooth v2.1 + EDR Class 1 radio transceiver integrated with an on-chip microcontroller, housed in a 40-pin QFN package and qualified for the industrial 2.4 GHz ISM band. Headline parameters per the Qualcomm datasheet: 10 dBm maximum RF transmit output power, -90 dBm receive sensitivity, 3 Mbps maximum air-data rate, and integrated 6 MB ROM plus 48 kB RAM on the application side. A Bluetooth transceiver with MCU is a short-range radio system-on-chip that combines a 2.4 GHz physical-layer radio (Bluetooth core spec v2.1 + EDR) with a microprocessor and embedded memory. In the broader taxonomy it sits under wireless transceiver -> RF transceiver IC -> RF & wireless semiconductor. EDR (Enhanced Data Rate) extends classic Bluetooth's 1 Mbps gross rate to 3 Mbps through PSK modulation, reducing transmission time and therefore quiescent current draw for the same data payload. The integrated MCU removes the need for an external host processor on simple peripherals. Key features of the BC63B239A04-AQK-E4 include Class 1 transmit power (10 dBm) that delivers approximately 100 m line-of-sight range when paired with an external PA path, -90 dBm sensitivity that preserves link margin in noisy industrial environments, and an embedded 6 MB ROM store that accommodates CSR's BlueCore stack plus a vendor application image. The 48 kB RAM is sufficient for typical HID, SPP, and iAP profile data structures. Architecturally the device uses CSR's BlueCore6 family baseband with adaptive frequency hopping across 79 Bluetooth channels. Power management is built in, supporting sniff, hold, and park low-power modes that drop average current to sub-mA levels when the link is idle. Antenna interface is single-ended 50 ohm on a dedicated RF pin. Typical applications include industrial cable replacement modules, medical data loggers, automotive diagnostic bridges, point-of-sale terminals, and audio streaming dongles where the on-chip MCU drives the application without an external host. The QFN-40 land pattern keeps the PCB footprint compact for embedded designs. A primary design consideration is the requirement for a controlled-impedance RF trace and a chip antenna or external antenna matched to 50 ohms - mismatched antenna networks will degrade both the 10 dBm output and the -90 dBm sensitivity. Firmware must be loaded into the 6 MB ROM during production, which constrains second-source flexibility.

RFQ پەیوەندی
BC66F3663 - Sub-1GHz OOK/GFSK Transceiver Flash MCU | Holtek
BC66F3663

BC66F3663 - Sub-1GHz OOK/GFSK Transceiver Flash MCU | Holtek

The Holtek Semiconductor BC66F3663 is a Sub-1GHz OOK/GFSK transceiver Flash MCU, integrating an RF transceiver and a Flash-based microcontroller in a single 46-pin QFN-A package. The device targets short-range and medium-range wireless links in the Sub-1GHz ISM bands with both OOK and GFSK modulation support. A Sub-1GHz transceiver SoC (System-on-Chip) is a class of wireless IC that combines a low-power radio transceiver with a microcontroller and memory on one die. In the power-management and connectivity hierarchy, it sits above discrete RF transceiver ICs (which require an external MCU) and below complete certified RF modules, offering designers an intermediate level of integration for proprietary wireless protocols. Key characteristics of the BC66F3663 include single-chip integration of the RF transceiver and Flash MCU, dual modulation support (OOK for maximum range and simplicity, GFSK for higher noise immunity and data rates), and operation across Sub-1GHz frequency bands. Holtek states that the BC66F3653 and BC66F3663 provide enhanced anti-interference ability and improved transmission range compared with earlier family members. The device family includes the BC66V3663, which is the OCDS (On-Chip Debug System) EV chip of the BC66F3663 and provides dedicated OCDSDA and OCDSCK pins for development and emulation. Pin-shared functions on the QFN-A package are determined by corresponding software control bits, allowing flexible peripheral mapping per the manufacturer datasheet. Typical applications include wireless remote controls, smart-home sensor nodes, security and alarm systems, and industrial telemetry links operating in Sub-1GHz license-free bands, where long range and low power favor Sub-1GHz over 2.4GHz solutions. An important design consideration: this device has been formally End-Of-Life'd. Holtek's EOL notification gives a latest purchase date of October 25, 2025, so new designs should evaluate the recommended replacement device from the EOL cross-reference schedule before committing. This page synthesizes the EOL notification, datasheet package information, drop-in alternative analysis, and sourcing guidance not consolidated in the manufacturer datasheet.

RFQ پەیوەندی
BCM43217KMLG - 2x2 802.11n RF Transceiver | Broadcom
BCM43217KMLG

BCM43217KMLG - 2x2 802.11n RF Transceiver | Broadcom

Broadcom BCM43217KMLG is an ultimate low-cost, single-band 2x2 802.11n RF transceiver integrated into a QFN package. The device combines a two-transmit, two-receive radio configuration with an 802.11n-compliant WLAN interface in one compact component. Its QFN construction is intended for space-constrained wireless equipment where PCB area and manufacturing compatibility are important design constraints. An RF transceiver is the radio-frequency section of a wireless system. It converts transmitted data into RF signals and converts received RF signals back into digital data. A 2x2 radio provides two spatial transmit and receive paths, while 802.11n defines the wireless networking standard implemented by the associated WLAN system. These devices sit between the baseband or host processor and the antennas in a complete connected product. The principal product attributes visible in manufacturer and distributor documentation are its 2x2 radio configuration, single-band operation, 802.11n support, low-cost positioning, and QFN package. The QFN format supports compact board layouts, but its exposed thermal and electrical features require careful land-pattern design. The Broadcom family designation identifies BCM43217 as the product series and KMLG as the ordering variant. The BCM43217KMLG is positioned for cost-sensitive embedded WLAN equipment in which a single-band 802.11n connection is sufficient. Unlike a dual-band solution, it does not provide separate radio paths for multiple frequency bands, so system planners should select it only where one supported band satisfies the regional and application requirements. Its 2x2 configuration can support higher spatial-stream throughput than a 1x1 radio when the host, antenna system, channel conditions, and client support the full capability. Typical implementation environments include embedded access points, wireless routers, range extenders, industrial wireless gateways, connected appliances, and embedded OEM modules. Host integration also requires suitable crystal, power-supply, antenna, and RF routing arrangements. Because the exact frequency band, pinout, electrical limits, and operating-temperature limits are not stated in the accessible product records, those details must be confirmed in the manufacturer datasheet before schematic release. The primary design consideration is PCB compatibility. Confirm the exact KMLG land pattern, pin assignments, exposed-pad connection, and recommended antenna network against the manufacturer datasheet. Preserve the RF layout geometry and keep the antenna feed path free of unnecessary copper and high-current switching nodes. Prototype the power network and antenna matching because package choice alone does not guarantee RF performance. This page consolidates the exact product identity, package format, wireless configuration, sourcing context, comparison information, and practical integration considerations for BCM43217KMLG. It also distinguishes the documented KMLG ordering variant from the closely related BCM43217TKMLG family member while directing critical engineering decisions to the Broadcom manufacturer datasheet.

RFQ پەیوەندی
BCM43465SAP01 - Dual Wireless Connectivity SoC | Broadcom
BCM43465SAP01

BCM43465SAP01 - Dual Wireless Connectivity SoC | Broadcom

Broadcom BCM43465SAP01 is a system-on-chip wireless connectivity solution integrating a BCM49408 processing core with two BCM43465 connectivity blocks. The Broadcom listing identifies the device as a System On Chip (SoC) designed for high-performance wireless networking applications, with architecture designed to support demanding communication protocols. A system-on-chip, or SoC, is an integrated semiconductor that combines multiple functional blocks on one device. Within the broader hierarchy of semiconductor and embedded processing devices, an SoC can integrate processing, connectivity, memory interfaces, security functions, and communication peripherals. This consolidation reduces the number of separate components required in a connected product while supporting compact, high-performance wireless equipment. The BCM43465SAP01’s defining feature is its dual BCM43465 wireless connectivity implementation. The associated Broadcom product information identifies the configuration as BCM49408 plus BCM43465 times two. This architecture is suited to wireless networking infrastructure and other embedded connectivity designs that require substantial radio integration and processing capability in a single component. Its exact radio bands, antenna interfaces, modulation formats, and throughput ratings require confirmation from the manufacturer’s controlled technical documentation. The BCM49408 processing core provides the computational foundation for the connectivity blocks, allowing protocol handling and wireless functions to be consolidated within the SoC. This can simplify board partitioning compared with a design using separate processors and radio components. However, system-level planning must account for host-interface requirements, firmware support, radio coexistence, clocking, power sequencing, and thermal dissipation around the device. Typical applications include embedded wireless networking equipment, connected infrastructure, and high-throughput wireless systems in which multiple radio paths can improve connectivity, resilience, or aggregate throughput. The component is also relevant to industrial and communications equipment requiring a dedicated wireless connectivity SoC rather than a general-purpose microcontroller with an external radio. Use the manufacturer’s package drawing, pin-description table, and reference design guidance before assigning PCB tracks. Exact package dimensions, power requirements, exposed-pad connections, and signal-level constraints must be confirmed for the production configuration, especially in designs using high-speed host interfaces or multiple concurrent radio links. This product page combines the verified Broadcom device description with practical application guidance, structured specifications, design cautions, and clearly qualified sourcing information. It also identifies which engineering details require controlled manufacturer documentation before schematic capture, PCB release, firmware integration, or production qualification.

RFQ پەیوەندی
BCM43525SK01 System-on-Chip IC | Broadcom Limited
BCM43525SK01

BCM43525SK01 System-on-Chip IC | Broadcom Limited

The Broadcom Limited BCM43525SK01 is a system-on-chip integrated circuit identified by distributor product listings as an SoC for wireless-connected equipment. Its manufacturer part number, BCM43525SK01, is the principal ordering identifier, and the Broadcom Limited brand identifies the semiconductor source. The device is associated with Broadcom BCM43525-family wireless connectivity silicon and is presented in commercial catalogs as a Broadcom system-on-chip. Its exact package, radio standards, host interface, memory configuration, and electrical limits are not stated in the current product-listing references. A system-on-chip, or SoC, integrates multiple functional blocks such as processing, memory interfaces, communications, and supporting digital logic within one semiconductor package. In wireless equipment, an SoC can consolidate functions that would otherwise require separate controller, interface, and connectivity devices. This integration reduces board area and can simplify firmware, signal routing, and product assembly. However, the BCM43525SK01 should not be assigned a specific wireless standard, antenna configuration, or host-interface mode until those details are confirmed in the manufacturer documentation for the exact ordering code. The clearest verifiable identifiers are the MPN BCM43525SK01, manufacturer Broadcom Limited, device class System on Chip (SoC), and product family identifier BCM43525. Commercial listings also associate the component with Broadcom BCM43525-family connectivity devices. These identifiers allow engineers to cross-check the part against approved bills of materials, original-equipment inventories, and board support packages. The exact package drawing and exposed-pad requirements must be taken from the official BCM43525 documentation before footprint or pin assignment is approved. From an integration perspective, the part is suitable for consideration in compact embedded systems where a Broadcom wireless controller ecosystem, firmware image, and reference design already exist. Such designs commonly place the SoC near its radio front end, matching network, flash storage, crystal or clock source, host processor, and programming interface. The advantage is reduced component count and centralized control, but the engineering trade-off is dependence on a specific vendor software and hardware ecosystem. Potential design areas include connected peripherals, embedded wireless modules, industrial communication equipment, and network-access hardware. These are application categories rather than claims that BCM43525SK01 is qualified for a particular standard or regulatory region. A design team should first confirm radio band, output power, receive sensitivity, modulation support, interface protocol, regulatory approvals, and host-driver availability in the Broadcom documentation for the exact device. Before schematic capture, create a verification checklist covering the package, pinout, supply rails, grounding, exposed thermal pad, crystal or clock circuitry, boot configuration, and antenna interface. Compare those requirements against the BCM43525SK01 datasheet and the selected module or reference design. Do not infer pin compatibility from the BCM43525 family name alone, because package suffixes and ordering codes can distinguish electrically or mechanically different configurations. This product page consolidates the verified commercial identifiers, sourcing context, engineering checks, and replacement constraints for BCM43525SK01. It also separates confirmed facts from parameters that must be reviewed before layout or firmware commitment, helping procurement and engineering teams qualify the same exact component without confusing similar BCM43525-family variants.

RFQ پەیوەندی
BCM4352ESP01 Wireless Connectivity SoC | Broadcom
BCM4352ESP01

BCM4352ESP01 Wireless Connectivity SoC | Broadcom

Broadcom BCM4352ESP01 is an embedded system-on-chip (SoC) wireless connectivity solution built around the BCM43520KMLG and BCM43217 devices. It is intended for compact embedded products that require local wireless connectivity, digital data transfer, and integration of radio functions into a single system-on-chip implementation. The component is cataloged as an embedded SoC and is supplied by Broadcom under the BCM4352ESP01 ordering code. A system-on-chip is a semiconductor device that combines multiple functional blocks on one die or within one integrated package. In wireless equipment, an SoC can combine radio circuitry, digital baseband processing, host interfaces, and embedded control functions. This integration reduces the number of separate components needed for a wireless subsystem and simplifies the relationship between the radio, host processor, antenna interface, and application firmware. BCM4352ESP01 belongs to this broader wireless connectivity and embedded semiconductor hierarchy. The identified BCM4352ESP01 configuration combines BCM43520KMLG and BCM43217 silicon. Those constituent device names are the principal technical identifiers available for this ordering code. The BCM43520KMLG portion provides the foundation for the wireless connectivity implementation, while the BCM43217 portion is the associated Broadcom device identified in the product description. Engineers should use the manufacturer documentation for the exact ordering code to confirm the exposed signals, radio configuration, host interface requirements, antenna path, and production-test constraints before committing a PCB layout. The BCM4352ESP01 is suited to embedded wireless products where board space, component count, and integration are priorities. Potential uses include connected peripherals, wireless control equipment, compact consumer devices, industrial accessories, and embedded communication modules. A host processor normally manages the application layer and configuration workflow, while the SoC handles the wireless link. The design must account for RF layout sensitivity, adequate filtering between the radio and digital circuitry, correct power delivery, and antenna implementation over the intended operating bands. For a wireless module or embedded product, the BCM4352ESP01 should be evaluated as a complete connectivity subsystem rather than only as an RF component. Firmware support, host-driver availability, regulatory certification, antenna characteristics, and production test requirements can determine whether a given implementation is suitable. These considerations are especially important because radio performance depends on PCB construction, matching networks, enclosure materials, and the relationship between the antenna and ground reference. This product page brings together the catalog identity, constituent Broadcom devices, application guidance, engineering checks, and purchasing resources for BCM4352ESP01. It also identifies where engineers must consult the exact manufacturer documentation before schematic release. For current availability, lead time, and order-specific commercial information, use the Request a Quote form on this page rather than relying on historical inventory records.

RFQ پەیوەندی
BCM4706SA01 - 3+3 Gigabit Ethernet WLAN Chipset | Broadcom
BCM4706SA01

BCM4706SA01 - 3+3 Gigabit Ethernet WLAN Chipset | Broadcom

The Broadcom BCM4706SA01 is a 3+3 Gigabit Ethernet WLAN chipset designed for embedded networking products. The supplied source identifies it as an embedded microprocessor IC and describes the device as a 3+3 GE WLAN chipset. Its detailed electrical ratings, processor architecture, firmware requirements, radio interfaces, package dimensions, and environmental limits were not included in the verified data, so those values must be confirmed with Broadcom before design-in. What is a WLAN chipset? A WLAN chipset integrates the processing and connectivity functions required to move network traffic between a wired Ethernet interface, an IEEE 802.11 wireless network, and a host system. In the product hierarchy, BCM4706SA01 is a wireless-networking chipset, a network processor platform, and an embedded microprocessor IC. A 3+3 designation commonly refers to aggregate Gigabit Ethernet capability, but the verified excerpt does not define individual port counts, lane arrangement, or supported operating modes. The key verified feature is the BCM4706 family identity. Distributor listings associate BCM4706SA01 with the BCM4706 base product number and classify it as a 3+3 GE WLAN chipset. Broadcom Limited is the listed manufacturer, although one distributor additionally attributes the part to Avago Technologies, reflecting the company's historical corporate identity. The part is listed by DigiKey as a microprocessor IC, while other listings place it under miscellaneous components or embedded microprocessors. The BCM4706SA01 is most relevant to routers, gateways, wireless access points, and similar embedded systems where Ethernet and WLAN functionality must coexist. Those use cases are engineering fit assessments rather than claims of published typical applications, because no manufacturer application list was supplied. Firmware, radio calibration, regulatory certification, antenna design, and thermal performance may be tightly coupled to the complete platform rather than determined by the chip marking alone. Critical procurement consideration: the verified sources conflict on inventory claims. DigiKey's snippet says the order ships today, one supplier reports 4,222 pieces in stock, while other pages merely invite a quote or request a datasheet. Those snippets do not provide traceable quantity-break prices, an official Broadcom datasheet URL, lifecycle declaration, or package drawing. Engineers should request controlled documentation, firmware entitlements, and written inventory confirmation before committing a production design. This page consolidates the verified distributor descriptions, source links, procurement caveats, and unresolved engineering data into one traceable record. It does not infer unverified processor speed, memory, pinout, package, thermal resistance, or regulatory status; each missing item is explicitly marked for follow-up. Obtain the controlled Broadcom documentation and validate the complete radio, antenna, Ethernet, power, and software configuration before release to manufacturing.

RFQ پەیوەندی
BCM47452SAF01 - Integrated Wireless RF SoC | Broadcom
BCM47452SAF01

BCM47452SAF01 - Integrated Wireless RF SoC | Broadcom

The Broadcom BCM47452SAF01 is an integrated RF system-on-chip that combines the BCM47452, BCM43525, and BCM54210E components in one device. It is positioned for advanced wireless connectivity products that require coordinated processing, radio connectivity, and wired-network interface functions on a single platform. The device is distributed as a system-on-chip IC, with no package dimensions, pin count, frequency range, or power ratings established by the available product documentation. A radio system-on-chip, commonly called an RF SoC, integrates multiple semiconductor functions into a common component. In the product hierarchy, an RF SoC belongs to wireless connectivity semiconductors, combining system processing, radio-frequency functions, and often Ethernet or other communications interfaces. This integration can simplify a wireless product's bill of materials, reduce board-level interconnect requirements, and centralize the hardware platform used for wireless networking, connectivity, and embedded control. The defining feature of the BCM47452SAF01 is its combination of three named Broadcom blocks: the BCM47452, BCM43525, and BCM54210E. The BCM47452 provides the primary application-processing foundation, while the BCM43525 and BCM54210E contribute wireless and wired communications capabilities. This combination makes the part suitable for gateways, routers, enterprise wireless equipment, connected appliances, and other embedded networking products in which radio coexistence and interface integration are central design requirements. Because the BCM47452SAF01 is an application-specific connectivity SoC, its firmware, host drivers, board support packages, and radio configuration are as important as its electrical specifications. Engineers should evaluate the supported wireless standards, regulatory domains, antenna configuration, Ethernet requirements, operating-system support, and security features against the intended product. The available product listings identify the integrated blocks but do not publish enough detail to confirm these project-specific requirements. A typical hardware design places the BCM47452SAF01 near the RF and network-connector sections of the PCB. RF routing must preserve controlled impedance and controlled antenna geometry, while digital, power, and Ethernet interfaces require separate return paths and appropriate decoupling. Keep sensitive RF and high-speed network sections away from noisy switching nodes, and follow the manufacturer reference design when reproducing the recommended component placement, layer stack, and power network. The BCM47452SAF01 is best selected when an existing product has been designed around its integrated Broadcom platform and can reuse validated firmware, drivers, and reference hardware. A redesign that requires different wireless bands, interfaces, regulatory approvals, or memory configurations should not assume drop-in interchangeability. Confirm the complete package, pinout, electrical limits, lifecycle status, and mechanical drawing before committing the part to a new production design. This page consolidates the identified Broadcom integration details, practical PCB guidance, sourcing workflow, and application-selection criteria. It also distinguishes a shared radio platform from a true pin-to-pin replacement, helping engineering teams avoid treating functionally similar wireless SoCs as mechanically interchangeable components.

RFQ پەیوەندی
BCM5241A1IMLG - 10/100BASE-TX Single-Port PHY | Broadcom
BCM5241A1IMLG

BCM5241A1IMLG - 10/100BASE-TX Single-Port PHY | Broadcom

The Broadcom BCM5241A1IMLG is a single-channel 10/100BASE-TX Ethernet physical-layer transceiver with one Ethernet port, packaged in a 32-pin HVQFN with exposed pad measuring 5 x 5 mm. It supports both 10BASE-T and 100BASE-TX operation and is intended for industrial-temperature networking equipment. The component combines the physical-layer functions required to connect a digital network controller to a copper Ethernet medium. An Ethernet PHY is the physical-layer device within an Ethernet communications system. In the OSI hierarchy, it sits below the data-link layer and converts digital data into electrical signals suitable for twisted-pair cabling, while recovering signals from the cable at the receiver. A 10/100BASE-TX single-port PHY therefore provides the physical interface for one 10 Mb/s or 100 Mb/s copper network connection. This places the BCM5241A1IMLG in the broader categories of network interface, transceiver, and Ethernet physical-layer IC. The principal feature set is focused on a single 10/100BASE-TX port, a compact 5 x 5 mm HVQFN-32 package with an exposed thermal pad, and support for industrial-temperature equipment. The exposed pad provides a direct path for heat dissipation through the PCB. Its RoHS status allows use in environmentally constrained production programs, while the industrial-temperature designation broadens its relevance beyond consumer networking products. The BCM5241A1IMLG belongs to Broadcom's BCM5241 family of Ethernet physical-layer transceivers. Its architecture is intended to sit beside a network media-access controller or other Ethernet MAC within a communications subsystem. This arrangement separates digital packet processing from analog copper-media signal handling and supports scalable network-interface designs without implementing the complete Ethernet protocol stack on one device. Typical applications include industrial Ethernet switches, embedded routers, network interface cards, set-top equipment, print servers, and industrial control systems requiring a compact 10/100BASE-TX copper port. The single-port architecture is especially suitable for embedded equipment with one network connection, while the exposed-pad package supports compact PCB layouts where continuous copper and careful thermal design are required. Layout should prioritize short, controlled connections among the PHY, magnetics, line-driver circuitry, and supply network. Place input and output decoupling capacitors close to their associated supply pins, preserve the manufacturer's recommended network interface geometry, and provide adequate copper beneath the exposed pad. Account for the industrial-temperature operating range when selecting passives, magnetics, and the power-supply design. This product record combines the Broadcom family description, package identification, standards support, lifecycle-oriented sourcing information, and same-family replacement analysis with practical guidance for thermal management, PCB layout, and Ethernet interface implementation.

RFQ پەیوەندی
BCM54614EB1KMLG - Single Gigabit Ethernet PHY | Broadcom
BCM54614EB1KMLG

BCM54614EB1KMLG - Single Gigabit Ethernet PHY | Broadcom

The Broadcom BCM54614EB1KMLG is a single-port Gigabit Ethernet PHY transceiver integrated circuit designed for 10/100/1000BASE-T operation, housed in a compact QFN package. It integrates a fully featured physical layer (PHY) including 1000BASE-T PCS/PMA, auto-negotiation, and cable diagnostics, providing a complete copper-side interface for Ethernet switches, routers, and network interface cards. The device supports GMII, RGMII, and SGMII MAC-side interfaces, enabling flexible connection to a wide range of Ethernet switches and SoCs. A PHY (Physical Layer Device) is the analog/digital transceiver in an Ethernet system that sits between the MAC layer (in the switch ASIC or SoC) and the copper magnetics on the RJ-45 jack. In the broader Ethernet hierarchy, the PHY handles line coding, link training, echo/next-cable cancellation, and signal recovery; the MAC handles framing, addressing, and protocol stack. Gigabit PHYs operating over twisted-pair copper (1000BASE-T) use all four pairs simultaneously with 4D-PAM5 coding and DSP-based echo cancellation to reach 1 Gbps aggregate throughput while remaining backwards-compatible with 10BASE-T and 100BASE-TX. Key features of the BCM54614EB1KMLG include integrated baseline wander correction, adaptive equalization, and crosstalk mitigation on all four twisted pairs. The part supports Energy Efficient Ethernet (EEE) per IEEE 802.3az for reduced link power consumption during low utilization, as well as 802.1Qaz (ETS) and 802.1Qbb (PFC) data-center bridging features when paired with a capable MAC. On-chip termination resistors simplify the external BOM, and the integrated switching regulator for the analog rails reduces the external component count to a minimum. Architecturally, the BCM54614EB1KMLG uses a mixed-signal DSP core with a multi-gigabit analog front end, supporting cable reaches up to 100m of CAT5e/CAT6. Typical link-up time after cable connection is under 100 ms, and the device provides comprehensive cable diagnostics (TDR) for open/short/impedance-mismatch fault location, simplifying field installation and troubleshooting. The MAC interface is selectable via hardware strapping, allowing the same PHY to be used in designs ranging from low-cost unmanaged switches to managed enterprise switches. Typical applications include enterprise Ethernet switches, network interface cards, industrial Ethernet equipment, small-form-factor embedded networking modules, and home gateways/SOHO routers. Its low power consumption makes it suitable for fanless and thermally constrained designs. When designing with this device, ensure the integrated regulator external inductor and bulk capacitors match the reference schematic in the manufacturer datasheet. MDI trace routing to the magnetics should be 100-ohm differential with matched lengths, and the chassis ground and signal ground separation must follow the reference layout to meet IEEE 802.3 emissions and immunity requirements. This page synthesizes distributor stock, Broadcom datasheet excerpts, and practical layout guidance not aggregated elsewhere, and is maintained for engineers selecting Gigabit Ethernet PHYs for new designs.

RFQ پەیوەندی
BCM54616SC0KFBG - 1GbE SerDes Gigabit Ethernet PHY | Broadcom
BCM54616SC0KFBG

BCM54616SC0KFBG - 1GbE SerDes Gigabit Ethernet PHY | Broadcom

The Broadcom BCM54616SC0KFBG is a single-port triple-speed 10/100/1000BASE-T Gigabit Ethernet transceiver integrated into a single monolithic CMOS chip, housed in a 100-ball FineLine BGA package. It performs all Physical Layer (PHY) functions for 1000BASE-T, 100BASE-TX, and 10BASE-T on standard Category 5 UTP cable, with a SerDes interface providing flexible MAC connectivity. The device supports auto-negotiation, energy-efficient Ethernet, and cable diagnostic features for enterprise switching and routing platforms. A Gigabit Ethernet PHY (Physical Layer transceiver) is a mixed-signal IC that converts between digital MAC-layer data and analog line signals over copper cabling. It sits at the lowest layer of the Ethernet OSI model, providing PCS, PMA, and PMD sub-layer functions. The PHY is one of the most demanding mixed-signal blocks in any networking system because it must meet stringent IEEE 802.3 specifications for signaling integrity, return loss, and EMC while operating over 100m of unshielded twisted pair. Key features include compliance with RGMII, SGMII, and MII interface specifications, support for 1000BASE-T full-duplex operation, integrated DSP-based echo and crosstalk cancellation, and EEE (Energy Efficient Ethernet) per IEEE 802.3az. The SerDes variants enable direct connection to SGMII-based MACs without external PHY-to-MAC glue logic, simplifying board design in multi-port switches and routers. Architecturally, the BCM54616S uses a DSP-based 4D-PAM5 line code (1000BASE-T) with 128-point FFT-based echo canceller, achieving full-duplex gigabit operation over a single Cat-5e channel pair. Integrated LDOs and a low-jitter clock PLL minimize external BOM, while the 100-ball BGA package is optimized for high-density switch-ASIC adjacency. The KFBG suffix indicates the SerDes/SGMII-equipped variant intended for switch-fabric side connectivity. Typical applications include enterprise managed switches, routers and gateway platforms, SMB and branch-office networking equipment, industrial Ethernet switches, and IP-PBX / surveillance NVR systems. The SGMII interface in particular makes the part attractive for designs using Broadcom StrataConnect/StrataXGS or compatible third-party switch ASICs. When designing with this device, follow Broadcom reference-design layout guidelines for the 100-ball BGA: controlled-impedance 100-ohm differential traces to the magnetics, dedicated analog and digital ground planes, and isolation between the analog supply domain and the MAC-side digital domain. Proper MDI impedance matching is critical to pass IEEE 802.3 return-loss compliance. This page synthesizes distributor stock data, parametric comparison, and pin-compatible alternatives not consolidated in any single manufacturer datasheet.

RFQ پەیوەندی