TUSB216RWBR - 3-Channel 480 Mbps USB Signal Conditioner | TI
MPN: TUSB216RWBR ✓ چالاکTUSB216RWBR گشتی
A USB high-speed signal conditioner is an interface IC placed between a USB controller and a connector or cable to restore signal integrity. USB 2.0 high-speed data travels as differential pairs, and losses caused by capacitance, resistance, and intersymbol interference can degrade edge quality. The TUSB216 compensates high-speed channel loss while leaving USB low-speed and full-speed signal characteristics unaltered. This makes it part of the broader USB interface IC and signal-conditioning hierarchy.
Three active channels allow the device to condition multiple USB data connections within compact equipment. The 480 Mbps operating class corresponds to USB 2.0 high speed, while the integrated DCP and CDP controller functions support downstream and charging-port behavior. Compatibility with USB On-The-Go and Battery Charging specifications broadens its use in portable-device, docking, and peripheral designs. The package keeps the footprint to 1.6 mm by 1.6 mm for space-constrained boards.
The TUSB216 uses a patented signal-conditioning approach for USB high-speed channels. According to the manufacturer datasheet, it compensates intersymbol-interference signal loss in the transmission channel, including the effects of capacitive AC loss and resistive DC loss. The low-speed and full-speed paths remain unchanged, which helps the device preserve compatibility with the broader USB 2.0 specification while correcting the higher-speed data path.
Typical applications include USB Type-C and legacy USB-A docking systems, portable electronics, charging docks, industrial peripherals, test equipment, and USB-to-USB repeaters. It is particularly useful when connector placement, cable length, protection components, or PCB routing create a lossy USB 2.0 channel. Its compact package also makes it suitable for multiport devices where three conditioned channels conserve board area.
PCB implementation should preserve controlled-impedance routing through the conditioner and minimize stub branches between the USB controller, TUSB216RWBR, and connector. Bypass capacitors should be placed close to the supply pins, and the ground-return path should remain continuous. Designers should verify eye diagrams and compliance masks across the intended cable length, connector, and enclosure configuration rather than assuming compensation is universal.
This page consolidates the device architecture, channel-rate information, package constraints, application guidance, and design considerations needed for USB 2.0 signal-integrity planning. It also distinguishes the TUSB216 family from related TI USB signal-conditioner parts and highlights the engineering checks required before treating any candidate as a board-level drop-in replacement.
جێگرەوەکانی جێگۆڕکێ بۆ TUSB216RWBR — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ TUSB216RWBR (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type, Package, Maximum Data Rate.
TUSB211RWBR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →TUSB211IRWBR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →TUSB212RWBR
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →TUSB214RWBR
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →TUSB216IRWBR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →TUSB216RWBR زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | USB 2.0 high-speed signal conditioner with battery charging controller |
| Number of Channels | 3 channels |
| USB High-Speed Data Rate | 480 Mbps |
| USB Interface Version | USB 2.0 |
| Supported USB Signal Classes | High-speed, low-speed, and full-speed |
| Low-Speed Signal Handling | Signal characteristics unaltered |
| Full-Speed Signal Handling | Signal characteristics unaltered |
| Nominal Supply Voltage | 5 V |
| Bandwidth | 240 kHz |
| Threshold | Adjustable |
| Charging Controller Functions | DCP and CDP controllers |
| Compatibility | USB On-The-Go and USB Battery Charging specifications |
| Package Type | 12-X2QFN |
| Package Dimensions | 1.6 mm x 1.6 mm |
| Terminal Count | 12 terminals |
| جۆری دامەزراندن | Surface mount |
| High-Speed Compensation | Compensation for intersymbol-interference signal loss |
ڕێنمایی ڕێکخستنی پینی TUSB216RWBR 1.6 mm x 1.6 mm
ڕێکخستنی پین بۆ TUSB216RWBR (پاکێجی 1.6 mm x 1.6 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ TUSB216RWBR.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
TUSB216RWBR گونجاوە بۆ 6 بەکارھێنانs: USB-C Docking Station Signal Conditioning, Portable Charging Dock, Industrial USB Peripheral, USB Test and Measurement Equipment, Multiport USB Hub, USB-to-USB Repeater.
USB-C Docking Station Signal Conditioning
The TUSB216RWBR fits USB 2.0 high-speed routes in a compact dock where connector launches, cable strain, and dense PCB routing can introduce edge degradation. Its three-channel architecture can condition multiple USB data paths while preserving low-speed and full-speed behavior. The 480 Mbps high-speed rating aligns with USB 2.0 operation, and the 1.6 mm by 1.6 mm X2QFN footprint limits board-area impact. Because the device also includes DCP and CDP controller functions, it is useful when the dock must expose downstream or charging-port behavior. Engineers should validate the complete connector-to-controller channel with compliance masks, because compensation settings and routing geometry remain application-specific.
پێشنیارکراو
Portable Charging Dock
The TUSB216RWBR is appropriate for portable charging docks that combine USB data connectivity with device charging. Its DCP and CDP controller functions support the required charging-port behavior, while the three-channel signal conditioner addresses high-speed loss on USB 2.0 data routes. At 480 Mbps, the device targets the full USB 2.0 high-speed class without slowing the data path. The small X2QFN package helps when dock designers must place conditioning close to a connector rather than near the system controller. A practical design should minimize the distance between USB routing and the conditioner, maintain controlled impedance, and verify the charger negotiation alongside signal-integrity measurements.
پێشنیارکراو
Industrial USB Peripheral
Industrial peripherals often connect through cables and protected I/O boards that can add loss between the USB controller and connector. The TUSB216RWBR compensates intersymbol-interference loss in the high-speed channel, including capacitive AC loss and resistive DC loss, while leaving slower USB signal classes unchanged. Its three conditioned channels are useful in control panels, test instruments, and factory peripherals with several USB ports. The nominal 5 V operating environment and compact surface-mount package simplify integration near connector launches. Before deployment, test across the intended cable lengths, operating temperature, and connector insertion cycles because environmental and mechanical variations can change channel margins.
پێشنیارکراو
USB Test and Measurement Equipment
The TUSB216RWBR can improve high-speed USB channels in oscilloscope, analyzer, and fixture systems where internal routing, relay contacts, or long interconnects create loss. Conditioning the path near the connector may improve edge quality while preserving compatibility with low-speed and full-speed devices that share the same controller. Its three-channel arrangement supports compact multiport measurement products, and its 480 Mbps capability matches USB 2.0 high speed. Designers should use controlled-impedance traces, solid reference planes, and short return paths. Validation should include eye-diagram margin, compliance-mask behavior, and repeated cable insertion because a successful waveform at the bench connector does not automatically guarantee performance across every fixture arrangement.
پێشنیارکراو
Multiport USB Hub
A multiport USB hub can use the TUSB216RWBR to condition three USB 2.0 high-speed channels within a constrained board area. The device operates up to 480 Mbps and leaves low-speed and full-speed signaling unaltered, allowing one component to serve mixed-speed ports without applying high-speed compensation to slower traffic. Its 1.6 mm by 1.6 mm X2QFN package helps when several port sections must fit around a main system controller. The DCP and CDP functions may support downstream or charging-facing behavior on applicable ports. Placement close to each connector, careful return-path continuity, and per-port validation remain essential because shared-ground and power-distribution differences can affect otherwise similar channels.
پێشنیارکراو
USB-to-USB Repeater
The TUSB216RWBR is suited to USB-to-USB repeater and extender products where cable or board losses degrade the 480 Mbps high-speed signal. Compensating the transmission channel for capacitive AC loss, resistive DC loss, and intersymbol interference can restore usable edge quality while leaving low-speed and full-speed traffic unchanged. Three channels allow a compact product to condition multiple data links, and the small X2QFN package supports placement near connector or cable-entry points. The design must preserve impedance through the entire repeater path and provide a continuous ground reference. Final acceptance testing should span the shortest and longest supported cable lengths and confirm that charging negotiation remains unaffected by the signal-conditioning stage.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ TUSB216RWBR — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | TUSB211RWBR | TUSB211IRWBR | TUSB212RWBR | TUSB214RWBR | TUSB216IRWBR |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 12-X2QFN (1.6 mm x 1.6 mm) | 12-X2QFN (1.6 mm x 1.6 mm) | 12-X2QFN (1.6 mm x 1.6 mm) | 12-X2QFN (1.6 mm x 1.6 mm) | 12-X2QFN (1.6 mm x 1.6 mm) | 12-X2QFN (1.6 mm x 1.6 mm) |
جیاکەرەوە سەرەکییەکان
- Three-channel USB high-speed conditioning in a compact footprint (بەراورد بەTUSB211RWBR)
- Charging-port integration with high-speed signal conditioning (بەراورد بەTUSB212RWBR)
- Multiport functionality without changing the USB high-speed class (بەراورد بەTUSB214RWBR)
تێبینییەکانی دیزاین
Place the TUSB216RWBR close to the loss-producing connector or cable entry rather than at the opposite end of the board. The high-speed data path should use controlled-impedance differential routing with continuous reference planes and minimal vias. Keep low-speed and full-speed routing physically separate where practical, because the TUSB216 compensates the high-speed path but does not alter those slower signal characteristics.
Route each conditioned USB differential pair through the intended TUSB216 pins without stubs, test pads, or branch traces that create additional reflections. Keep the ground return path continuous under the differential routes and avoid splitting the ground plane beneath the 12-X2QFN device. Use the manufacturer land pattern and thermal-land guidance for the selected package, then verify signal and power integrity through simulation or measurement with the actual connector and cable model.
Do not treat equal package dimensions as proof that every TUSB211, TUSB212, TUSB214, or TUSB216 ordering variant is functionally interchangeable. Review the pin-description table, DCP/CDP requirements, adjustable-threshold configuration, and USB low-speed/full-speed behavior for the exact alternate MPN. A production substitution should also be checked with eye-diagram and compliance-mask measurements across the specified cable lengths.
Provide a clean 5 V supply to the TUSB216 and place the required bypass capacitance as close as practical to the supply and ground pins. Avoid routing high-current charger paths through the USB signal-conditioning area, and keep return current out of the differential signal region. Validate supply noise, startup behavior, and charging-port operation together because DCP/CDP functions and conditioned high-speed data can share a compact implementation area.
زانیاری پابەندبوون
The available product information identifies USB On-The-Go and USB Battery Charging specification compatibility, but it does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations.