AD707SH - 15uV Precision Op Amp | Analog Devices
MPN: AD707SH ✗ کۆتایی ژیانAD707SH گشتی
An operational amplifier is a voltage-gain component used to amplify small signals in analog systems. The AD707 belongs to the precision bipolar operational-amplifier hierarchy, combining low offset voltage, low bias current, low drift, and high open-loop gain. These characteristics reduce measurement error when the input signal is small and the operating temperature may vary.
The AD707SH's offset voltage below 15 uV reduces the input-referred error introduced by the amplifier itself. Its maximum input offset current of 1.0 nA is particularly important when driving high-impedance sensors because it limits the voltage generated across source resistance. The 0.1 uV/°C maximum drift specification in the top grade improves error stability across temperature changes.
The device is a bipolar monolithic precision amplifier rather than a CMOS rail-to-rail amplifier. That architecture suits circuits operating from dual supplies where the input and output signals remain within the linear input range. Compared with rail-to-rail CMOS devices, the AD707SH emphasizes offset, drift, bias-current, and open-loop accuracy rather than wide common-mode operation at low supply voltage.
Typical uses include precision sensor amplifiers, strain-gauge and bridge measurement front ends, laboratory instrumentation, low-level signal conditioning, and industrial measurement systems. The 8-pin TO-99 package also supports applications that benefit from a hermetic, compact metal-can package with eight wire leads.
When designing a circuit around the AD707SH, follow the manufacturer pinout and connection guidance, including offset-null pin treatment and input common-mode limits. Decoupling should use a stable reference plane, and source impedances should remain balanced to minimize offset and bias-current errors. Input and output filtering should be selected according to the application bandwidth rather than added without noise analysis.
This product page organizes the AD707SH specifications, military package information, sourcing route, and precision-amplifier design considerations. It also identifies verified drop-in alternatives and explains where grade, temperature range, or offset performance can affect replacement decisions.
جێگرەوەکانی جێگۆڕکێ بۆ AD707SH — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ AD707SH (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Type.
AD707SH/883B
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
AD707AH
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →AD707JH
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
AD707SH
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →AD706AH
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
AD707SH زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | Precision bipolar operational amplifier |
| Maximum Input Offset Voltage | Less than 15 uV |
| Maximum Input Offset Current | 1.0 nA |
| Top-Grade Maximum Offset Voltage Drift | 0.1 uV/°C |
| Architecture | Bipolar monolithic |
| Number of Terminals | 8 terminals |
| پاکێج | TO-99-8 metal-can package |
| Package Shape | Round |
| Terminal Form | Wire |
| Temperature Grade | Military |
| جۆری دامەزراندن | Through-hole |
| Offset Adjustment | Two offset-null pins |
ڕێکخستنی پینی AD707SH
| پین 1 | OFFSET NULL — Offset-voltage adjustment terminal |
| پین 2 | INVERTING INPUT — Inverting input terminal |
| پین 3 | NONINVERTING INPUT — Non-inverting input terminal |
| پین 4 | V- — Negative supply terminal |
| پین 5 | OFFSET NULL — Offset-voltage adjustment terminal |
| پین 6 | OUTPUT — Analog output terminal |
| پین 7 | V+ — Positive supply terminal |
| پین 8 | NC — Not connected |
بەکارهێنانە باوەکان
AD707SH گونجاوە بۆ 6 بەکارھێنانs: Strain-Gauge Bridge Amplifier, Precision Pressure and Transducer Interface, Laboratory Instrumentation Front End, Low-Level Signal Conditioning, Medical Monitoring Signal Interface, Legacy Precision Data Acquisition.
Strain-Gauge Bridge Amplifier
The AD707SH fits low-level bridge measurements because its input offset voltage is below 15 uV and maximum input offset current is 1.0 nA, limiting amplifier-generated error relative to the small differential bridge signal. The top-grade maximum drift of 0.1 uV/°C also supports stable measurements when the equipment experiences temperature variation. It can be placed at the front of an instrumentation chain ahead of a precision ADC. The design must verify input common-mode range, output swing, source-impedance balance, and noise bandwidth before using the amplifier in a gain stage.
پێشنیارکراو
Precision Pressure and Transducer Interface
The AD707SH is appropriate for high-impedance pressure, position, and resistive sensor interfaces because its maximum input offset current of 1.0 nA limits the input-generated error voltage when source resistance is significant. Input offset voltage below 15 uV helps preserve the integrity of millivolt-level sensor outputs, while the 0.1 uV/°C top-grade drift reduces temperature-dependent measurement error. Use the device in a non-inverting or differential front end, balance the impedance seen by both inputs, and confirm that the sensor excitation and output stay within the amplifier's specified common-mode range.
پێشنیارکراو
Laboratory Instrumentation Front End
The AD707SH can serve as the first precision gain stage in laboratory instrumentation where signal levels are small and measurement accuracy matters more than a modern surface-mount footprint. The offset voltage below 15 uV and maximum offset current of 1.0 nA help preserve low-level inputs, while the bipolar precision architecture supports instrumentation-amplifier configurations. Its 8-pin TO-99 package is particularly suitable for legacy instrument boards and modular measurement hardware. Validate noise, common-mode range, output swing, and settling behavior for the selected gain before finalizing the analog path.
پێشنیارکراو
Low-Level Signal Conditioning
The AD707SH is well suited to low-level signal conditioning because its input offset voltage below 15 uV and maximum input offset current of 1.0 nA minimize error added to small differential signals. The 0.1 uV/°C top-grade maximum drift improves stability when gain is high enough to magnify both offset and drift. Place the amplifier close to the source to reduce noise pickup and use short, guarded routes for sensitive input nodes. The circuit designer should account for the bipolar device's supply requirements and verify output swing before selecting the gain and feedback network.
پێشنیارکراو
Medical Monitoring Signal Interface
The AD707SH can support low-amplitude medical monitoring interfaces when the selected system requires a precision bipolar amplifier with low offset and bias current. The specified offset voltage below 15 uV and maximum offset current of 1.0 nA help prevent the amplifier from dominating a small physiological or diagnostic signal. The military-grade ordering designation is not, by itself, a medical-product qualification, so medical-system design controls, risk assessment, isolation, and applicable regulatory validation remain necessary. Confirm noise, common-mode behavior, and patient-safety requirements at the complete-system level.
پێشنیارکراو
Legacy Precision Data Acquisition
The AD707SH supports legacy precision data-acquisition systems that require an 8-wire TO-99 footprint and the established AD707 pinout. Its below-15-uV offset specification and 1.0 nA maximum input offset current make it suitable for conditioning low-level analog channels before digitization. The TO-99 package is mechanically different from modern leadless packages, so its primary value is maintaining an existing board rather than minimizing area. During repair or redesign, verify the required military grade, inspect the original board's compensation and grounding methods, and compare the legacy amplifier against a current package before changing the footprint.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ AD707SH — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | AD707SH/883B | AD707AH | AD707JH | AD707SH | AD706AH |
|---|---|---|---|---|---|---|
| Package | TO-99-8 metal-can package | TO-99-8 metal-can package | TO-99-8 metal-can package | TO-99-8 metal-can package | TO-99-8 metal-can package | TO-99-8 metal-can package |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Amplifier Architecture | Bipolar monolithic precision operational amplifier | Bipolar monolithic precision operational amplifier | Bipolar monolithic precision operational amplifier | Bipolar monolithic precision operational amplifier | Bipolar monolithic precision operational amplifier | Bipolar monolithic precision operational amplifier |
| Terminal Count | 8 terminals | 8 terminals | 8 terminals | 8 terminals | 8 terminals | 8 terminals |
| Terminal Form | Wire | Wire | Wire | Wire | Wire | Wire |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole |
جیاکەرەوە سەرەکییەکان
- Lower maximum offset drift than the AD706 alternative (بەراورد بەAD706AH)
- Qualified procurement-oriented family option (بەراورد بەAD707AH)
- Precision bias-current performance for high-impedance sources (بەراورد بەAD707JH)
- Direct maintenance compatibility for existing TO-99 boards (بەراورد بەAD707AH)
تێبینییەکانی دیزاین
Route the two input nets as a matched pair, particularly when the source impedance is high. Keep the AD707SH close to the transducer or bridge, use short traces, and avoid switching nodes and digital clocks beneath the amplifier inputs. Maintain similar spacing from thermal sources on both sides of the differential pair. Because the maximum input offset current is 1.0 nA, even small source-impedance imbalance can create an error that is significant relative to a millivolt-level measurement.
Check the complete signal path against the AD707 datasheet limits for input common-mode voltage, output swing, gain bandwidth, slew rate, and noise. Avoid assuming that the small input offset specification guarantees usable operation near either supply rail. For a precision gain stage, calculate the maximum input-referred error from offset voltage, offset drift, bias current, source impedance, and temperature before setting the system accuracy target. Add output isolation or filtering when driving the next stage if capacitive loading could affect stability.
Do not substitute a modern surface-mount amplifier without redesigning the PCB and verifying rail-to-rail behavior, supply voltage, common-mode range, offset, noise, and stability. The TO-99 footprint has eight through-hole leads, while many current precision amplifiers use leadless packages with different pin assignments. For a like-for-like repair, follow the manufacturer AD707 pin-description table, leave the unused no-connect terminal unconnected, and follow the specified offset-null configuration. The two offset-null terminals should not be treated as ordinary signal inputs.
Calculate worst-case amplifier dissipation using the actual supply voltage and operating current, then check the junction-temperature limit for the applicable military temperature grade and TO-99 package. Temperature gradients across the device can increase offset drift even when average junction temperature appears acceptable. Place the metal can away from local heat sources when practical, provide thermal relief appropriate to the board construction, and verify the enclosure's thermal path. The 0.1 uV/°C top-grade drift specification is a component limit, not a substitute for controlling temperature gradients.
زانیاری پابەندبوون
The AD707SH is a military-grade operational amplifier, not an automotive AEC-Q100 device. No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact ordering code.