Analog Devices

AD707SH - 15uV Precision Op Amp | Analog Devices

MPN: AD707SH ✗ Akhir Hayat
Less than 15 uV Vdss 1.0 nA Id TO-99-8 metal-can package Package
MOQ: 1 |

AD707SH Ringkasan

The Analog Devices AD707SH is a low-cost, high-precision bipolar operational amplifier with input offset voltage below 15 uV, maximum input bias current of 1.0 nA, and a top-grade maximum offset-voltage drift of 0.1 uV/°C. The device is offered in an 8-pin TO-99 hermetic package for precision instrumentation and military-temperature applications.

An operational amplifier is a voltage-gain component used to amplify small signals in analog systems. The AD707 belongs to the precision bipolar operational-amplifier hierarchy, combining low offset voltage, low bias current, low drift, and high open-loop gain. These characteristics reduce measurement error when the input signal is small and the operating temperature may vary.

The AD707SH's offset voltage below 15 uV reduces the input-referred error introduced by the amplifier itself. Its maximum input offset current of 1.0 nA is particularly important when driving high-impedance sensors because it limits the voltage generated across source resistance. The 0.1 uV/°C maximum drift specification in the top grade improves error stability across temperature changes.

The device is a bipolar monolithic precision amplifier rather than a CMOS rail-to-rail amplifier. That architecture suits circuits operating from dual supplies where the input and output signals remain within the linear input range. Compared with rail-to-rail CMOS devices, the AD707SH emphasizes offset, drift, bias-current, and open-loop accuracy rather than wide common-mode operation at low supply voltage.

Typical uses include precision sensor amplifiers, strain-gauge and bridge measurement front ends, laboratory instrumentation, low-level signal conditioning, and industrial measurement systems. The 8-pin TO-99 package also supports applications that benefit from a hermetic, compact metal-can package with eight wire leads.

When designing a circuit around the AD707SH, follow the manufacturer pinout and connection guidance, including offset-null pin treatment and input common-mode limits. Decoupling should use a stable reference plane, and source impedances should remain balanced to minimize offset and bias-current errors. Input and output filtering should be selected according to the application bandwidth rather than added without noise analysis.

This product page organizes the AD707SH specifications, military package information, sourcing route, and precision-amplifier design considerations. It also identifies verified drop-in alternatives and explains where grade, temperature range, or offset performance can affect replacement decisions.

Pilihan pengganti yang segera untuk AD707SH — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera AD707SH (sama faktor bentuk dan kaki) — berbeza dalam Package, Product Type.

Analog Devices
Package: TO-99
Product Type: Ultralow drift precision operational amplifier
Bandingkan Dengan AD707SH →

AD707SH/883B

✅ Masuk Drop-In
📦 TO-99-8
Same AD707 precision-amplifier family and 8-pin TO-99 package; the /883B designation adds a distinct procurement or screening context rather than changing the core package footprint.

📋 Alternatif rujukan (tidak dalam katalog)

AD707AH

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
Analog Devices
📦 TO-99-8
Ultralow drift precision operational amplifier · 15 µV · 0.35 µV/°C · 0.35 µV p-p · 130 dB · 120 dB · 120 dB · 1 nA

Hubungi untuk harga

Lihat Datasheet →

AD707JH

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 TO-99-8
Same AD707 family and 8-pin TO-99 footprint; ordering suffix differs by up to 100% as a code but does not establish a package-level geometry difference.

📋 Alternatif rujukan (tidak dalam katalog)

AD707SH

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
Analog Devices
📦 TO-99-8
Precision bipolar operational amplifier · Less than 15 uV · 1.0 nA · 0.1 uV/°C · Bipolar monolithic · 8 terminals · TO-99-8 metal-can package · Round

Hubungi untuk harga

Lihat Datasheet →

AD706AH

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 TO-99-8
Same 8-pin TO-99 footprint and bipolar precision-amplifier architecture, but offset drift is approximately 0.3 uV/°C versus 0.1 uV/°C for the AD707 top grade, a 200% increase in maximum drift.

📋 Alternatif rujukan (tidak dalam katalog)

AD707SH Penilaian maksimum & Ciri-ciri Elektrik

Product Type Precision bipolar operational amplifier
Maximum Input Offset Voltage Less than 15 uV
Maximum Input Offset Current 1.0 nA
Top-Grade Maximum Offset Voltage Drift 0.1 uV/°C
Architecture Bipolar monolithic
Number of Terminals 8 terminals
Kemasan TO-99-8 metal-can package
Package Shape Round
Terminal Form Wire
Temperature Grade Military
Jenis Pemasangan Through-hole
Offset Adjustment Two offset-null pins

Konfigurasi Pin AD707SH

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
Pin 1 OFFSET NULL — Offset-voltage adjustment terminal
Pin 2 INVERTING INPUT — Inverting input terminal
Pin 3 NONINVERTING INPUT — Non-inverting input terminal
Pin 4 V- — Negative supply terminal
Pin 5 OFFSET NULL — Offset-voltage adjustment terminal
Pin 6 OUTPUT — Analog output terminal
Pin 7 V+ — Positive supply terminal
Pin 8 NC — Not connected

Aplikasi Biasa

AD707SH patut untuk 6 aplikasis: Strain-Gauge Bridge Amplifier, Precision Pressure and Transducer Interface, Laboratory Instrumentation Front End, Low-Level Signal Conditioning, Medical Monitoring Signal Interface, Legacy Precision Data Acquisition.

🏭

Strain-Gauge Bridge Amplifier

The AD707SH fits low-level bridge measurements because its input offset voltage is below 15 uV and maximum input offset current is 1.0 nA, limiting amplifier-generated error relative to the small differential bridge signal. The top-grade maximum drift of 0.1 uV/°C also supports stable measurements when the equipment experiences temperature variation. It can be placed at the front of an instrumentation chain ahead of a precision ADC. The design must verify input common-mode range, output swing, source-impedance balance, and noise bandwidth before using the amplifier in a gain stage.

🧩

Precision Pressure and Transducer Interface

The AD707SH is appropriate for high-impedance pressure, position, and resistive sensor interfaces because its maximum input offset current of 1.0 nA limits the input-generated error voltage when source resistance is significant. Input offset voltage below 15 uV helps preserve the integrity of millivolt-level sensor outputs, while the 0.1 uV/°C top-grade drift reduces temperature-dependent measurement error. Use the device in a non-inverting or differential front end, balance the impedance seen by both inputs, and confirm that the sensor excitation and output stay within the amplifier's specified common-mode range.

🔧

Laboratory Instrumentation Front End

The AD707SH can serve as the first precision gain stage in laboratory instrumentation where signal levels are small and measurement accuracy matters more than a modern surface-mount footprint. The offset voltage below 15 uV and maximum offset current of 1.0 nA help preserve low-level inputs, while the bipolar precision architecture supports instrumentation-amplifier configurations. Its 8-pin TO-99 package is particularly suitable for legacy instrument boards and modular measurement hardware. Validate noise, common-mode range, output swing, and settling behavior for the selected gain before finalizing the analog path.

📡

Low-Level Signal Conditioning

The AD707SH is well suited to low-level signal conditioning because its input offset voltage below 15 uV and maximum input offset current of 1.0 nA minimize error added to small differential signals. The 0.1 uV/°C top-grade maximum drift improves stability when gain is high enough to magnify both offset and drift. Place the amplifier close to the source to reduce noise pickup and use short, guarded routes for sensitive input nodes. The circuit designer should account for the bipolar device's supply requirements and verify output swing before selecting the gain and feedback network.

💊

Medical Monitoring Signal Interface

The AD707SH can support low-amplitude medical monitoring interfaces when the selected system requires a precision bipolar amplifier with low offset and bias current. The specified offset voltage below 15 uV and maximum offset current of 1.0 nA help prevent the amplifier from dominating a small physiological or diagnostic signal. The military-grade ordering designation is not, by itself, a medical-product qualification, so medical-system design controls, risk assessment, isolation, and applicable regulatory validation remain necessary. Confirm noise, common-mode behavior, and patient-safety requirements at the complete-system level.

🖥️

Legacy Precision Data Acquisition

The AD707SH supports legacy precision data-acquisition systems that require an 8-wire TO-99 footprint and the established AD707 pinout. Its below-15-uV offset specification and 1.0 nA maximum input offset current make it suitable for conditioning low-level analog channels before digitization. The TO-99 package is mechanically different from modern leadless packages, so its primary value is maintaining an existing board rather than minimizing area. During repair or redesign, verify the required military grade, inspect the original board's compensation and grounding methods, and compare the legacy amplifier against a current package before changing the footprint.

What is the AD707SH?
The AD707SH is a precision bipolar operational amplifier from Analog Devices, intended for low-level analog signal conditioning and measurement. According to the manufacturer datasheet, it provides input offset voltage below 15 uV, maximum input offset current of 1.0 nA, and top-grade maximum offset drift of 0.1 uV/°C. The device is packaged in an 8-wire TO-99 metal-can package and is identified as a military-temperature-grade component.
What are the key specifications of AD707SH that engineers should know?
The AD707SH combines three principal precision specifications: input offset voltage below 15 uV, maximum input offset current of 1.0 nA, and top-grade maximum offset-voltage drift of 0.1 uV/°C. It is a bipolar monolithic operational amplifier in an 8-pin TO-99 package. These figures determine suitability for high-impedance sensors, bridge amplifiers, laboratory instruments, and other systems in which amplifier-generated error must remain small.
Where can I download the AD707SH datasheet PDF?
The official AD707SH family datasheet is available from Analog Devices at the manufacturer PDF link on this page. The document contains the product description, electrical characteristics, ordering information, package information, and application details for the AD707 family. For a new layout, use the exact AD707SH ordering code from the manufacturer documentation and confirm the required temperature grade and hermetic package before releasing the schematic.
Where can I find the AD707SH pinout?
The AD707SH uses an 8-pin TO-99 layout with two inverting-input, non-inverting-input, offset-null, supply, and output connections distributed across the package. Use the pin-description table in the Analog Devices AD707 datasheet when assigning PCB nets, and use the package drawing on this page to establish physical orientation. The TO-99 lead numbering follows the counter-clockwise convention used in the manufacturer package drawing.
Is the AD707SH suitable for high-impedance sensor measurements?
The AD707SH is suitable for many high-impedance sensor front ends because its maximum input offset current is 1.0 nA and its input offset voltage is below 15 uV. The offset-current contribution rises with source resistance, so use the manufacturer input-bias-current data to calculate the error voltage. The device is especially appropriate for bridge, strain-gauge, and laboratory transducer measurements where the available signal is small.
What are the differences between AD707SH and AD707SH/883B?
AD707SH and AD707SH/883B are related Analog Devices precision amplifiers, with the /883B designation identifying a version intended for qualified or controlled procurement environments. The AD707 family datasheet should be used to confirm grade, screening, order-code, and environmental requirements before substitution. Both devices use the same TO-99 family, but procurement status and screening expectations can differ even when the core amplifier architecture is similar.
What is the best drop-in replacement for AD707SH?
The best drop-in replacement is the qualified AD707SH/883B because it preserves the AD707SH family and 8-pin TO-99 package while supporting procurement requirements associated with the /883 designation. Before replacing any part, verify offset voltage, offset drift, bias current, supply range, temperature grade, and exact pinout against the manufacturer datasheet. Package identity alone does not establish full electrical equivalence.
Can AD707SH/883B replace AD707SH without PCB changes?
Yes, AD707SH/883B can serve as the closest drop-in candidate for AD707SH because it uses the same AD707 family and 8-pin TO-99 package. The engineering review must still confirm the temperature grade, screening status, electrical limits, and intended procurement environment. The manufacturer datasheet and ordering information remain the controlling documents for a production substitution.
When should I choose AD707SH over an alternative amplifier?
Choose AD707SH when the design specifically requires the AD707 family, a military temperature-grade designation, and the 8-pin TO-99 hermetic package. Its offset voltage below 15 uV, maximum input offset current of 1.0 nA, and 0.1 uV/°C top-grade drift support precision measurement requirements. Select another amplifier when a modern package, rail-to-rail input, lower power, or wider bandwidth is more important than preserving the legacy footprint.
Is AD707SH suitable for low-noise instrument amplifier designs?
The AD707SH can serve in a precision instrumentation amplifier when its offset, drift, and bias-current characteristics are appropriate for the sensor and temperature range. Its bipolar architecture and low offset current are advantageous for high-source-impedance transducers. The design must also satisfy the amplifier's supply, common-mode, output-swing, noise, and stability requirements as specified in the manufacturer datasheet.
What should I check when using AD707SH in a precision bridge circuit?
Check input common-mode range, output swing, supply voltage, offset voltage, bias current, and the input bias-current error created by source impedance. Keep the two input paths symmetrical so bias-current and thermal effects cancel as closely as practical. Use the manufacturer offset-null guidance when adjustment is required, and verify that the final noise and stability performance meet the bridge measurement bandwidth.
What is the power-consumption consideration for AD707SH?
AD707SH is a bipolar precision amplifier, so supply current and dissipation must be included in a thermal design. Calculate worst-case dissipation from the actual supply voltage and quiescent or output-current condition, then confirm the resulting junction temperature against the applicable package and temperature-grade limit. The manufacturer datasheet supplies the operating-current and thermal information needed for a production calculation.
Is AD707SH still available for procurement?
The AD707SH is treated as an obsolete legacy part for sourcing purposes, and availability should be confirmed through the Request a Quote form on this page. Legacy stock can vary by package, screening, and inspection requirements. Do not assume that an unverified inventory listing meets military procurement needs; request traceability and supporting documentation with the quotation.
How much does AD707SH cost, and how do I request a quote?
The current commercial terms for AD707SH should be requested through the Request a Quote form on this page because legacy pricing, screening, and inventory can vary by quantity. The form is the appropriate route for obtaining unit pricing, minimum order quantity, availability, and lead-time confirmation. Include the exact AD707SH ordering code and any required inspection or documentation in the request.
What is the AD707SH lead time and minimum order quantity?
Lead time and minimum order quantity for AD707SH depend on remaining legacy inventory, manufacturer traceability, and screening requirements. Request current availability, MOQ, and lead time through the Request a Quote form on this page. For an obsolete military-grade component, procurement planning should also allow time for inspection, documentation, incoming testing, and possible lot traceability review.

Data referensi kejuruteraan untuk AD707SH — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose AD707SH when maintaining a legacy precision-measurement system that specifically requires an 8-pin TO-99 military-grade amplifier and the established AD707 characteristics of offset voltage below 15 uV, maximum offset current of 1.0 nA, and top-grade drift of 0.1 uV/°C. Prefer AD707SH/883B when the procurement specification requires the qualified /883 ordering context. AD707AH and AD707JH may be considered for compatible TO-99 designs after their grade, temperature, and screening requirements are confirmed. AD706AH is a viable precision-amplifier alternative when the 0.1 uV/°C drift target is unnecessary, but its approximately 0.3 uV/°C maximum drift is materially worse. For a new compact, low-power, or rail-to-rail design, move beyond the TO-99 ecosystem and compare current package options using input common-mode range, offset, noise, bandwidth, supply voltage, and total board area.

Perbandingan dengan Gantian

Parametr Produk Ini AD707SH/883B AD707AH AD707JH AD707SH AD706AH
Package TO-99-8 metal-can package TO-99-8 metal-can package TO-99-8 metal-can package TO-99-8 metal-can package TO-99-8 metal-can package TO-99-8 metal-can package
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Amplifier Architecture Bipolar monolithic precision operational amplifier Bipolar monolithic precision operational amplifier Bipolar monolithic precision operational amplifier Bipolar monolithic precision operational amplifier Bipolar monolithic precision operational amplifier Bipolar monolithic precision operational amplifier
Terminal Count 8 terminals 8 terminals 8 terminals 8 terminals 8 terminals 8 terminals
Terminal Form Wire Wire Wire Wire Wire Wire
Mounting Type Through-hole Through-hole Through-hole Through-hole Through-hole Through-hole

Penyeberangsung Jelas

  • Lower maximum offset drift than the AD706 alternative (vsAD706AH)
  • Qualified procurement-oriented family option (vsAD707AH)
  • Precision bias-current performance for high-impedance sources (vsAD707JH)
  • Direct maintenance compatibility for existing TO-99 boards (vsAD707AH)

Catatan Desain

Route the two input nets as a matched pair, particularly when the source impedance is high. Keep the AD707SH close to the transducer or bridge, use short traces, and avoid switching nodes and digital clocks beneath the amplifier inputs. Maintain similar spacing from thermal sources on both sides of the differential pair. Because the maximum input offset current is 1.0 nA, even small source-impedance imbalance can create an error that is significant relative to a millivolt-level measurement.

Check the complete signal path against the AD707 datasheet limits for input common-mode voltage, output swing, gain bandwidth, slew rate, and noise. Avoid assuming that the small input offset specification guarantees usable operation near either supply rail. For a precision gain stage, calculate the maximum input-referred error from offset voltage, offset drift, bias current, source impedance, and temperature before setting the system accuracy target. Add output isolation or filtering when driving the next stage if capacitive loading could affect stability.

Do not substitute a modern surface-mount amplifier without redesigning the PCB and verifying rail-to-rail behavior, supply voltage, common-mode range, offset, noise, and stability. The TO-99 footprint has eight through-hole leads, while many current precision amplifiers use leadless packages with different pin assignments. For a like-for-like repair, follow the manufacturer AD707 pin-description table, leave the unused no-connect terminal unconnected, and follow the specified offset-null configuration. The two offset-null terminals should not be treated as ordinary signal inputs.

Calculate worst-case amplifier dissipation using the actual supply voltage and operating current, then check the junction-temperature limit for the applicable military temperature grade and TO-99 package. Temperature gradients across the device can increase offset drift even when average junction temperature appears acceptable. Place the metal can away from local heat sources when practical, provide thermal relief appropriate to the board construction, and verify the enclosure's thermal path. The 0.1 uV/°C top-grade drift specification is a component limit, not a substitute for controlling temperature gradients.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The AD707SH is a military-grade operational amplifier, not an automotive AEC-Q100 device. No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact ordering code.

Data disahkan pada: 2026-11-18 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

AD707SH datasheet AD707SH specifications AD707SH pinout AD707SH datasheet pdf AD707SH TO-99 amplifier AD707SH offset voltage AD707SH input bias current AD707SH equivalent AD707SH replacement AD707SH vs AD707SH/883B AD707SH price AD707SH stock Analog Devices AD707SH AD707SH precision instrumentation AD707SH military op amp

Komponen dan Tanda berkaitan

Analog Devices AD707SH AD707SH/883B AD707AH AD707JH AD706AH precision operational amplifier bipolar operational amplifier linear amplifier analog signal conditioning instrumentation amplifier input offset voltage input offset current offset-voltage drift TO-99-8 TO-99 package hermetic metal-can package through-hole package surface mount strain-gauge bridge high-impedance sensor precision ADC laboratory instrumentation RoHS REACH
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ