AD707SH - 15uV Precision Op Amp | Analog Devices
N.º da peça: AD707SH ✗ Fim de vidaAD707SH Visão geral
An operational amplifier is a voltage-gain component used to amplify small signals in analog systems. The AD707 belongs to the precision bipolar operational-amplifier hierarchy, combining low offset voltage, low bias current, low drift, and high open-loop gain. These characteristics reduce measurement error when the input signal is small and the operating temperature may vary.
The AD707SH's offset voltage below 15 uV reduces the input-referred error introduced by the amplifier itself. Its maximum input offset current of 1.0 nA is particularly important when driving high-impedance sensors because it limits the voltage generated across source resistance. The 0.1 uV/°C maximum drift specification in the top grade improves error stability across temperature changes.
The device is a bipolar monolithic precision amplifier rather than a CMOS rail-to-rail amplifier. That architecture suits circuits operating from dual supplies where the input and output signals remain within the linear input range. Compared with rail-to-rail CMOS devices, the AD707SH emphasizes offset, drift, bias-current, and open-loop accuracy rather than wide common-mode operation at low supply voltage.
Typical uses include precision sensor amplifiers, strain-gauge and bridge measurement front ends, laboratory instrumentation, low-level signal conditioning, and industrial measurement systems. The 8-pin TO-99 package also supports applications that benefit from a hermetic, compact metal-can package with eight wire leads.
When designing a circuit around the AD707SH, follow the manufacturer pinout and connection guidance, including offset-null pin treatment and input common-mode limits. Decoupling should use a stable reference plane, and source impedances should remain balanced to minimize offset and bias-current errors. Input and output filtering should be selected according to the application bandwidth rather than added without noise analysis.
This product page organizes the AD707SH specifications, military package information, sourcing route, and precision-amplifier design considerations. It also identifies verified drop-in alternatives and explains where grade, temperature range, or offset performance can affect replacement decisions.
Alternativas drop-in para AD707SH — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com AD707SH (mesmo formato e footprint) — diferindo em Package, Product Type.
AD707SH/883B
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
AD707AH
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →AD707JH
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
AD707SH
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →AD706AH
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
AD707SH Classificações máximas e características elétricas
| Product Type | Precision bipolar operational amplifier |
| Maximum Input Offset Voltage | Less than 15 uV |
| Maximum Input Offset Current | 1.0 nA |
| Top-Grade Maximum Offset Voltage Drift | 0.1 uV/°C |
| Architecture | Bipolar monolithic |
| Number of Terminals | 8 terminals |
| Encapsulamento | TO-99-8 metal-can package |
| Package Shape | Round |
| Terminal Form | Wire |
| Temperature Grade | Military |
| Tipo de montagem | Through-hole |
| Offset Adjustment | Two offset-null pins |
Configuração de pinos do AD707SH
| Pino 1 | OFFSET NULL — Offset-voltage adjustment terminal |
| Pino 2 | INVERTING INPUT — Inverting input terminal |
| Pino 3 | NONINVERTING INPUT — Non-inverting input terminal |
| Pino 4 | V- — Negative supply terminal |
| Pino 5 | OFFSET NULL — Offset-voltage adjustment terminal |
| Pino 6 | OUTPUT — Analog output terminal |
| Pino 7 | V+ — Positive supply terminal |
| Pino 8 | NC — Not connected |
Aplicações típicas
AD707SH é adequado para 6 aplicaçãos: Strain-Gauge Bridge Amplifier, Precision Pressure and Transducer Interface, Laboratory Instrumentation Front End, Low-Level Signal Conditioning, Medical Monitoring Signal Interface, Legacy Precision Data Acquisition.
Strain-Gauge Bridge Amplifier
The AD707SH fits low-level bridge measurements because its input offset voltage is below 15 uV and maximum input offset current is 1.0 nA, limiting amplifier-generated error relative to the small differential bridge signal. The top-grade maximum drift of 0.1 uV/°C also supports stable measurements when the equipment experiences temperature variation. It can be placed at the front of an instrumentation chain ahead of a precision ADC. The design must verify input common-mode range, output swing, source-impedance balance, and noise bandwidth before using the amplifier in a gain stage.
Recomendado
Precision Pressure and Transducer Interface
The AD707SH is appropriate for high-impedance pressure, position, and resistive sensor interfaces because its maximum input offset current of 1.0 nA limits the input-generated error voltage when source resistance is significant. Input offset voltage below 15 uV helps preserve the integrity of millivolt-level sensor outputs, while the 0.1 uV/°C top-grade drift reduces temperature-dependent measurement error. Use the device in a non-inverting or differential front end, balance the impedance seen by both inputs, and confirm that the sensor excitation and output stay within the amplifier's specified common-mode range.
Recomendado
Laboratory Instrumentation Front End
The AD707SH can serve as the first precision gain stage in laboratory instrumentation where signal levels are small and measurement accuracy matters more than a modern surface-mount footprint. The offset voltage below 15 uV and maximum offset current of 1.0 nA help preserve low-level inputs, while the bipolar precision architecture supports instrumentation-amplifier configurations. Its 8-pin TO-99 package is particularly suitable for legacy instrument boards and modular measurement hardware. Validate noise, common-mode range, output swing, and settling behavior for the selected gain before finalizing the analog path.
Recomendado
Low-Level Signal Conditioning
The AD707SH is well suited to low-level signal conditioning because its input offset voltage below 15 uV and maximum input offset current of 1.0 nA minimize error added to small differential signals. The 0.1 uV/°C top-grade maximum drift improves stability when gain is high enough to magnify both offset and drift. Place the amplifier close to the source to reduce noise pickup and use short, guarded routes for sensitive input nodes. The circuit designer should account for the bipolar device's supply requirements and verify output swing before selecting the gain and feedback network.
Recomendado
Medical Monitoring Signal Interface
The AD707SH can support low-amplitude medical monitoring interfaces when the selected system requires a precision bipolar amplifier with low offset and bias current. The specified offset voltage below 15 uV and maximum offset current of 1.0 nA help prevent the amplifier from dominating a small physiological or diagnostic signal. The military-grade ordering designation is not, by itself, a medical-product qualification, so medical-system design controls, risk assessment, isolation, and applicable regulatory validation remain necessary. Confirm noise, common-mode behavior, and patient-safety requirements at the complete-system level.
Recomendado
Legacy Precision Data Acquisition
The AD707SH supports legacy precision data-acquisition systems that require an 8-wire TO-99 footprint and the established AD707 pinout. Its below-15-uV offset specification and 1.0 nA maximum input offset current make it suitable for conditioning low-level analog channels before digitization. The TO-99 package is mechanically different from modern leadless packages, so its primary value is maintaining an existing board rather than minimizing area. During repair or redesign, verify the required military grade, inspect the original board's compensation and grounding methods, and compare the legacy amplifier against a current package before changing the footprint.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para AD707SH — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | AD707SH/883B | AD707AH | AD707JH | AD707SH | AD706AH |
|---|---|---|---|---|---|---|
| Package | TO-99-8 metal-can package | TO-99-8 metal-can package | TO-99-8 metal-can package | TO-99-8 metal-can package | TO-99-8 metal-can package | TO-99-8 metal-can package |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Amplifier Architecture | Bipolar monolithic precision operational amplifier | Bipolar monolithic precision operational amplifier | Bipolar monolithic precision operational amplifier | Bipolar monolithic precision operational amplifier | Bipolar monolithic precision operational amplifier | Bipolar monolithic precision operational amplifier |
| Terminal Count | 8 terminals | 8 terminals | 8 terminals | 8 terminals | 8 terminals | 8 terminals |
| Terminal Form | Wire | Wire | Wire | Wire | Wire | Wire |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole |
Principais diferenciais
- Lower maximum offset drift than the AD706 alternative (vs AD706AH)
- Qualified procurement-oriented family option (vs AD707AH)
- Precision bias-current performance for high-impedance sources (vs AD707JH)
- Direct maintenance compatibility for existing TO-99 boards (vs AD707AH)
Notas de projeto
Route the two input nets as a matched pair, particularly when the source impedance is high. Keep the AD707SH close to the transducer or bridge, use short traces, and avoid switching nodes and digital clocks beneath the amplifier inputs. Maintain similar spacing from thermal sources on both sides of the differential pair. Because the maximum input offset current is 1.0 nA, even small source-impedance imbalance can create an error that is significant relative to a millivolt-level measurement.
Check the complete signal path against the AD707 datasheet limits for input common-mode voltage, output swing, gain bandwidth, slew rate, and noise. Avoid assuming that the small input offset specification guarantees usable operation near either supply rail. For a precision gain stage, calculate the maximum input-referred error from offset voltage, offset drift, bias current, source impedance, and temperature before setting the system accuracy target. Add output isolation or filtering when driving the next stage if capacitive loading could affect stability.
Do not substitute a modern surface-mount amplifier without redesigning the PCB and verifying rail-to-rail behavior, supply voltage, common-mode range, offset, noise, and stability. The TO-99 footprint has eight through-hole leads, while many current precision amplifiers use leadless packages with different pin assignments. For a like-for-like repair, follow the manufacturer AD707 pin-description table, leave the unused no-connect terminal unconnected, and follow the specified offset-null configuration. The two offset-null terminals should not be treated as ordinary signal inputs.
Calculate worst-case amplifier dissipation using the actual supply voltage and operating current, then check the junction-temperature limit for the applicable military temperature grade and TO-99 package. Temperature gradients across the device can increase offset drift even when average junction temperature appears acceptable. Place the metal can away from local heat sources when practical, provide thermal relief appropriate to the board construction, and verify the enclosure's thermal path. The 0.1 uV/°C top-grade drift specification is a component limit, not a substitute for controlling temperature gradients.
Informações de conformidade
The AD707SH is a military-grade operational amplifier, not an automotive AEC-Q100 device. No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact ordering code.