AD977ABNZ - 16-Bit 200 kSPS SAR ADC | Analog Devices
MPN: AD977ABNZ ✗ کۆتایی ژیانAD977ABNZ گشتی
An ADC is an interface component that converts an analog voltage into a numeric value for processing, measurement, or control. The AD977 belongs to the successive-approximation ADC family within the broader data-acquisition and signal-conversion hierarchy. Compared with flash and pipeline converters, a SAR ADC generally offers good accuracy and power efficiency in a compact package, although its sampling rate is lower than many high-speed architectures.
The AD977ABNZ provides 16-bit resolution, one analog input, and a serial SPI-compatible interface. Its maximum throughput is 200 kSPS, while its specified power dissipation is no more than 100 mW. Operation from a single 5 V supply simplifies analog and digital rail design. The device also supports power-down mode and is factory tested for SNR and THD in addition to conventional offset, gain, and linearity specifications.
Its switched-capacitor sampling system supports deterministic conversion sequencing, while the internal reference reduces the need for an external precision reference in many measurement systems. The serial interface reduces the number of PCB traces and can be useful in compact instrumentation. As with any sampling ADC, input bandwidth, source impedance, acquisition time, clock quality, reference stability, and PCB grounding directly affect achievable accuracy.
Typical uses include industrial process measurement, sensor signal acquisition, laboratory instruments, medical monitoring, industrial control, and embedded data acquisition. The 200 kSPS rate is appropriate for many slowly changing or multiplexed analog signals rather than high-bandwidth waveform capture. The 20-pin through-hole PDIP package is also convenient for prototypes, legacy equipment, and repair assemblies that use leaded components.
When laying out the circuit, keep the analog input path short, place decoupling capacitors near the supply pins, and provide a clean return path from the converter ground to the source. Check the input range and acquisition timing before selecting source resistance. For systems replacing a modern surface-mount ADC, verify the complete pinout, interface timing, reference behavior, and calibration requirements rather than relying on package dimensions alone.
This product page combines the AD977 family architecture, exact AD977ABNZ package and performance details, replacement considerations, and practical implementation guidance to support component selection, PCB design, and lifecycle planning.
جێگرەوەکانی جێگۆڕکێ بۆ AD977ABNZ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ AD977ABNZ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Data Interface, Factory Calibration, Package, Supply Voltage.
AD977AANZ
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →AD977ACN
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
AD977ABNZ زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Number of Bits | 16 bit |
| ڕێژەی نموونەگرتن | 200 kSPS |
| Converter Architecture | Successive approximation, switched capacitor |
| Number of Inputs | 1 input |
| ڤۆڵتیەی دابینکردن | 5 V single supply |
| Maximum Power Dissipation | 100 mW |
| Data Interface | Serial, SPI |
| Internal Reference Voltage | 2.5 V |
| پاکێج | 20-pin PDIP, 7.62 mm width |
| Terminal Count | 20 terminals |
| جۆری دامەزراندن | Through-hole |
| Packaging | Tube |
| پلەی گەرمیی کارکردن | -40°C to +85°C |
| Temperature Grade | Industrial |
| Power-Down Mode | Supported |
| Factory Calibration | Factory-calibrated switched-capacitor architecture |
| DC and AC Test Coverage | Offset, gain, linearity, SNR, and THD |
ڕێنمایی ڕێکخستنی پینی AD977ABNZ 20-pin pdip, 7.62 mm width
ڕێکخستنی پین بۆ AD977ABNZ (پاکێجی 20-pin pdip, 7.62 mm width). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ AD977ABNZ.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
AD977ABNZ گونجاوە بۆ 6 بەکارھێنانs: Industrial Process Measurement, Precision Sensor Acquisition, Laboratory Instrumentation, Medical Monitoring Equipment, Industrial Control Systems, Legacy Equipment Repair.
Industrial Process Measurement
The AD977ABNZ fits process-measurement channels that require 16-bit resolution but do not need high-bandwidth waveform capture. Its 200 kSPS throughput permits rapid acquisition of temperature, pressure, level, or flow signals, while the single 5 V supply simplifies front-panel instrumentation. The serial interface reduces trace count on controller boards. Before deployment, verify signal bandwidth, sensor settling time, input range, isolation requirements, and the acquisition timing needed by the control loop.
پێشنیارکراو
Precision Sensor Acquisition
The AD977ABNZ is suitable for conditioning outputs from slow or multiplexed sensors that benefit from 16-bit numerical detail. A 200 kSPS SAR conversion rate can sample many diagnostic channels quickly, and the internal 2.5 V reference reduces external reference complexity. The converter consumes no more than 100 mW under specified conditions. For thermocouples, strain gauges, or resistive bridges, include suitable excitation, protection, filtering, and analog-front-end circuitry around the ADC.
پێشنیارکراو
Laboratory Instrumentation
The AD977ABNZ can serve as the acquisition converter in laboratory instruments that measure steady voltages, slow waveforms, or controlled sensor outputs. Its 16-bit resolution improves numerical visibility, while the serial SPI-compatible interface supports compact connection to a digital controller. The 20-pin PDIP format is particularly convenient for through-hole prototypes and repair assemblies. Validate input bandwidth, noise performance, SNR, THD, and acquisition timing against the instrument specifications before production release.
پێشنیارکراو
Medical Monitoring Equipment
AD977ABNZ can be used in non-diagnostic monitoring equipment that acquires low-bandwidth physiological or laboratory sensor signals. Its 16-bit conversion resolution supports detailed measurements, and the 200 kSPS rate is more than adequate for many pressure, flow, or temperature channels. The single 5 V operation and 100 mW maximum power specification simplify portable-system power planning. Medical designs still require separate validation of patient safety, isolation, accuracy, EMC, and applicable quality requirements.
پێشنیارکراو
Industrial Control Systems
The AD977ABNZ fits embedded control loops that read analog process variables into a digital controller. A throughput rate of 200 kSPS gives substantial margin for typical temperature, pressure, and position feedback channels, while the serial interface limits controller pin usage. Power consumption of no more than 100 mW supports compact control assemblies. Ensure the selected grade, isolation architecture, input filtering, and watchdog behavior satisfy the equipment's environmental and functional-safety requirements.
پێشنیارکراو
Legacy Equipment Repair
AD977ABNZ is particularly relevant to repair and modernization of equipment that already uses a 20-pin PDIP AD977A-family converter. The through-hole package and documented AD977AANZ package compatibility support board-level substitution without changing the PCB footprint. Engineers should still compare every pin function, supply requirement, timing limit, temperature grade, and calibration characteristic. A successful physical insertion does not by itself establish that a substitute satisfies the original system's accuracy or reliability requirements.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ AD977ABNZ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | AD977AANZ | AD977ACN |
|---|---|---|---|
| Package | 20-pin PDIP | 20-pin PDIP | 20-pin PDIP |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Resolution | 16 bit | 16 bit | 16 bit |
| Throughput Rate | 200 kSPS | 200 kSPS | 200 kSPS |
| Converter Architecture | Successive approximation, switched capacitor | Successive approximation, switched capacitor | Successive approximation, switched capacitor |
| Number of Inputs | 1 input | 1 input | 1 input |
| Supply Voltage | 5 V single supply | 5 V single supply | 5 V single supply |
| Data Interface | Serial, SPI | Serial, SPI | Serial, SPI |
| Power Dissipation | 100 mW maximum | 100 mW maximum | 100 mW maximum |
جیاکەرەوە سەرەکییەکان
- Documented direct package substitution (بەراورد بەAD977AANZ)
- Low-power 16-bit conversion (بەراورد بەAD977ACN)
- Single-supply system simplification (بەراورد بەAD977AANZ)
تێبینییەکانی دیزاین
Route the analog input directly to the converter and keep it away from serial clock and data traces. Place the input filter or protection network close to the ADC, and connect its return path to the converter ground without crossing noisy digital return paths. For a switched-capacitor SAR ADC, source impedance and capacitor settling time must remain compatible with the acquisition interval.
Use the Analog Devices application guidance to select and place the supply bypass capacitors. Keep the input and digital return paths compact, and use the package ground leads effectively rather than relying on a long board trace. The converter operates from one 5 V rail, but measured noise and conversion accuracy also depend on rail quality, clock stability, and reference decoupling.
Treat the serial clock as a critical signal even though the conversion rate is only 200 kSPS. Use short traces, a continuous ground reference, and logic levels compatible with the connected controller. Check setup and hold requirements from the manufacturer datasheet, especially when the ADC and controller are separated by a cable or connector.
Do not assume that any AD977A-family suffix is a drop-in substitute. Confirm the exact 20-pin assignments, supply limits, temperature grade, timing, reference configuration, and calibration behavior. AD977AANZ has documented package compatibility with AD977ABNZ, while AD977ACN still requires suffix-specific review before production use.
زانیاری پابەندبوون
No definitive RoHS, REACH, halogen-free, lead-free, or conflict-minerals declaration was identified for the exact AD977ABNZ ordering code. The part is an industrial-temperature data-conversion IC and is not presented as an automotive-qualified device.