AD977ABNZ - 16-Bit 200 kSPS SAR ADC | Analog Devices
MPN: AD977ABNZ ✗ Tapus ng BuhayAD977ABNZ Ulas
An ADC is an interface component that converts an analog voltage into a numeric value for processing, measurement, or control. The AD977 belongs to the successive-approximation ADC family within the broader data-acquisition and signal-conversion hierarchy. Compared with flash and pipeline converters, a SAR ADC generally offers good accuracy and power efficiency in a compact package, although its sampling rate is lower than many high-speed architectures.
The AD977ABNZ provides 16-bit resolution, one analog input, and a serial SPI-compatible interface. Its maximum throughput is 200 kSPS, while its specified power dissipation is no more than 100 mW. Operation from a single 5 V supply simplifies analog and digital rail design. The device also supports power-down mode and is factory tested for SNR and THD in addition to conventional offset, gain, and linearity specifications.
Its switched-capacitor sampling system supports deterministic conversion sequencing, while the internal reference reduces the need for an external precision reference in many measurement systems. The serial interface reduces the number of PCB traces and can be useful in compact instrumentation. As with any sampling ADC, input bandwidth, source impedance, acquisition time, clock quality, reference stability, and PCB grounding directly affect achievable accuracy.
Typical uses include industrial process measurement, sensor signal acquisition, laboratory instruments, medical monitoring, industrial control, and embedded data acquisition. The 200 kSPS rate is appropriate for many slowly changing or multiplexed analog signals rather than high-bandwidth waveform capture. The 20-pin through-hole PDIP package is also convenient for prototypes, legacy equipment, and repair assemblies that use leaded components.
When laying out the circuit, keep the analog input path short, place decoupling capacitors near the supply pins, and provide a clean return path from the converter ground to the source. Check the input range and acquisition timing before selecting source resistance. For systems replacing a modern surface-mount ADC, verify the complete pinout, interface timing, reference behavior, and calibration requirements rather than relying on package dimensions alone.
This product page combines the AD977 family architecture, exact AD977ABNZ package and performance details, replacement considerations, and practical implementation guidance to support component selection, PCB design, and lifecycle planning.
Mga alternatibo na pwedeng ilagay na AD977ABNZ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok AD977ABNZ (parehas na form factor at footprint) — pagkakaiba sa Data Interface, Factory Calibration, Package, Supply Voltage.
AD977AANZ
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →AD977ACN
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
AD977ABNZ Mga Pinakamataas na Rating at Electrical Characteristics
| Number of Bits | 16 bit |
| Rate ng Pagkupita | 200 kSPS |
| Converter Architecture | Successive approximation, switched capacitor |
| Number of Inputs | 1 input |
| Volte ng Pagbibigay | 5 V single supply |
| Maximum Power Dissipation | 100 mW |
| Data Interface | Serial, SPI |
| Internal Reference Voltage | 2.5 V |
| Packhaging | 20-pin PDIP, 7.62 mm width |
| Terminal Count | 20 terminals |
| Uri ng Pagpapasok | Through-hole |
| Packaging | Tube |
| Temperature na Operasyon | -40°C to +85°C |
| Temperature Grade | Industrial |
| Power-Down Mode | Supported |
| Factory Calibration | Factory-calibrated switched-capacitor architecture |
| DC and AC Test Coverage | Offset, gain, linearity, SNR, and THD |
Gabay sa Pin Configuration ng AD977ABNZ 20-pin pdip, 7.62 mm width
Pin configuration para sa AD977ABNZ (20-pin pdip, 7.62 mm width package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa AD977ABNZ.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
AD977ABNZ ay nararapat para sa 6 aplikasyons: Industrial Process Measurement, Precision Sensor Acquisition, Laboratory Instrumentation, Medical Monitoring Equipment, Industrial Control Systems, Legacy Equipment Repair.
Industrial Process Measurement
The AD977ABNZ fits process-measurement channels that require 16-bit resolution but do not need high-bandwidth waveform capture. Its 200 kSPS throughput permits rapid acquisition of temperature, pressure, level, or flow signals, while the single 5 V supply simplifies front-panel instrumentation. The serial interface reduces trace count on controller boards. Before deployment, verify signal bandwidth, sensor settling time, input range, isolation requirements, and the acquisition timing needed by the control loop.
Inirekomenda
Precision Sensor Acquisition
The AD977ABNZ is suitable for conditioning outputs from slow or multiplexed sensors that benefit from 16-bit numerical detail. A 200 kSPS SAR conversion rate can sample many diagnostic channels quickly, and the internal 2.5 V reference reduces external reference complexity. The converter consumes no more than 100 mW under specified conditions. For thermocouples, strain gauges, or resistive bridges, include suitable excitation, protection, filtering, and analog-front-end circuitry around the ADC.
Inirekomenda
Laboratory Instrumentation
The AD977ABNZ can serve as the acquisition converter in laboratory instruments that measure steady voltages, slow waveforms, or controlled sensor outputs. Its 16-bit resolution improves numerical visibility, while the serial SPI-compatible interface supports compact connection to a digital controller. The 20-pin PDIP format is particularly convenient for through-hole prototypes and repair assemblies. Validate input bandwidth, noise performance, SNR, THD, and acquisition timing against the instrument specifications before production release.
Inirekomenda
Medical Monitoring Equipment
AD977ABNZ can be used in non-diagnostic monitoring equipment that acquires low-bandwidth physiological or laboratory sensor signals. Its 16-bit conversion resolution supports detailed measurements, and the 200 kSPS rate is more than adequate for many pressure, flow, or temperature channels. The single 5 V operation and 100 mW maximum power specification simplify portable-system power planning. Medical designs still require separate validation of patient safety, isolation, accuracy, EMC, and applicable quality requirements.
Inirekomenda
Industrial Control Systems
The AD977ABNZ fits embedded control loops that read analog process variables into a digital controller. A throughput rate of 200 kSPS gives substantial margin for typical temperature, pressure, and position feedback channels, while the serial interface limits controller pin usage. Power consumption of no more than 100 mW supports compact control assemblies. Ensure the selected grade, isolation architecture, input filtering, and watchdog behavior satisfy the equipment's environmental and functional-safety requirements.
Inirekomenda
Legacy Equipment Repair
AD977ABNZ is particularly relevant to repair and modernization of equipment that already uses a 20-pin PDIP AD977A-family converter. The through-hole package and documented AD977AANZ package compatibility support board-level substitution without changing the PCB footprint. Engineers should still compare every pin function, supply requirement, timing limit, temperature grade, and calibration characteristic. A successful physical insertion does not by itself establish that a substitute satisfies the original system's accuracy or reliability requirements.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for AD977ABNZ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | AD977AANZ | AD977ACN |
|---|---|---|---|
| Package | 20-pin PDIP | 20-pin PDIP | 20-pin PDIP |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Resolution | 16 bit | 16 bit | 16 bit |
| Throughput Rate | 200 kSPS | 200 kSPS | 200 kSPS |
| Converter Architecture | Successive approximation, switched capacitor | Successive approximation, switched capacitor | Successive approximation, switched capacitor |
| Number of Inputs | 1 input | 1 input | 1 input |
| Supply Voltage | 5 V single supply | 5 V single supply | 5 V single supply |
| Data Interface | Serial, SPI | Serial, SPI | Serial, SPI |
| Power Dissipation | 100 mW maximum | 100 mW maximum | 100 mW maximum |
Pangunahing mga Pagkakaiba
- Documented direct package substitution (kumpara saAD977AANZ)
- Low-power 16-bit conversion (kumpara saAD977ACN)
- Single-supply system simplification (kumpara saAD977AANZ)
Talaan ng Disenyo
Route the analog input directly to the converter and keep it away from serial clock and data traces. Place the input filter or protection network close to the ADC, and connect its return path to the converter ground without crossing noisy digital return paths. For a switched-capacitor SAR ADC, source impedance and capacitor settling time must remain compatible with the acquisition interval.
Use the Analog Devices application guidance to select and place the supply bypass capacitors. Keep the input and digital return paths compact, and use the package ground leads effectively rather than relying on a long board trace. The converter operates from one 5 V rail, but measured noise and conversion accuracy also depend on rail quality, clock stability, and reference decoupling.
Treat the serial clock as a critical signal even though the conversion rate is only 200 kSPS. Use short traces, a continuous ground reference, and logic levels compatible with the connected controller. Check setup and hold requirements from the manufacturer datasheet, especially when the ADC and controller are separated by a cable or connector.
Do not assume that any AD977A-family suffix is a drop-in substitute. Confirm the exact 20-pin assignments, supply limits, temperature grade, timing, reference configuration, and calibration behavior. AD977AANZ has documented package compatibility with AD977ABNZ, while AD977ACN still requires suffix-specific review before production use.
Impormasyon ng Pagsunod sa Kautusan
No definitive RoHS, REACH, halogen-free, lead-free, or conflict-minerals declaration was identified for the exact AD977ABNZ ordering code. The part is an industrial-temperature data-conversion IC and is not presented as an automotive-qualified device.