Analog Devices

AD977ABNZ - 16-Bit 200 kSPS SAR ADC | Analog Devices

MPN: AD977ABNZ ✗ জীবনকালের সমাপ্তি
5 V single supply Vdss 20-pin PDIP, 7.62 mm width Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

AD977ABNZ সারাংশ

Analog Devices AD977ABNZ is a 16-bit successive-approximation analog-to-digital converter with a 200 kSPS throughput rate, single 5 V operation, and a 20-pin PDIP package. It is designed for precision signal acquisition where a serial output, low power consumption, and factory-calibrated performance are valuable. The converter uses a factory-calibrated switched-capacitor architecture and incorporates an internal 2.5 V reference.

An ADC is an interface component that converts an analog voltage into a numeric value for processing, measurement, or control. The AD977 belongs to the successive-approximation ADC family within the broader data-acquisition and signal-conversion hierarchy. Compared with flash and pipeline converters, a SAR ADC generally offers good accuracy and power efficiency in a compact package, although its sampling rate is lower than many high-speed architectures.

The AD977ABNZ provides 16-bit resolution, one analog input, and a serial SPI-compatible interface. Its maximum throughput is 200 kSPS, while its specified power dissipation is no more than 100 mW. Operation from a single 5 V supply simplifies analog and digital rail design. The device also supports power-down mode and is factory tested for SNR and THD in addition to conventional offset, gain, and linearity specifications.

Its switched-capacitor sampling system supports deterministic conversion sequencing, while the internal reference reduces the need for an external precision reference in many measurement systems. The serial interface reduces the number of PCB traces and can be useful in compact instrumentation. As with any sampling ADC, input bandwidth, source impedance, acquisition time, clock quality, reference stability, and PCB grounding directly affect achievable accuracy.

Typical uses include industrial process measurement, sensor signal acquisition, laboratory instruments, medical monitoring, industrial control, and embedded data acquisition. The 200 kSPS rate is appropriate for many slowly changing or multiplexed analog signals rather than high-bandwidth waveform capture. The 20-pin through-hole PDIP package is also convenient for prototypes, legacy equipment, and repair assemblies that use leaded components.

When laying out the circuit, keep the analog input path short, place decoupling capacitors near the supply pins, and provide a clean return path from the converter ground to the source. Check the input range and acquisition timing before selecting source resistance. For systems replacing a modern surface-mount ADC, verify the complete pinout, interface timing, reference behavior, and calibration requirements rather than relying on package dimensions alone.

This product page combines the AD977 family architecture, exact AD977ABNZ package and performance details, replacement considerations, and practical implementation guidance to support component selection, PCB design, and lifecycle planning.

এর জন্য ড্রপ-ইন বিকল্প AD977ABNZ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible AD977ABNZ (একই form factor এবং footprint) — পার্থক্য রয়েছে Data Interface, Factory Calibration, Package, Supply Voltage.

Analog Devices
Data Interface: Serial, SPI-compatible
Factory Calibration: Yes
Package: 20-pin PDIP, 0.300 in (7.62 mm) pitch
এর সাথে তুলনা করুন AD977ABNZ →

AD977AANZ

✅ ড্রপ-ইন
Analog Devices
📦 20-pin PDIP
Successive-approximation ADC · 16 bit · 1 channel · 200 kSPS · 5 V · 2.5 V · Supported · Switched-capacitor SAR

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

AD977ACN

✅ ড্রপ-ইন
📦 20-pin PDIP
Same AD977A 16-bit, 200 kSPS, single-5 V SAR architecture and 20-pin PDIP package; suffix-specific temperature or qualification ratings may differ.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

AD977ABNZ সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Number of Bits 16 bit
স্যাম্পলিং রেট 200 kSPS
Converter Architecture Successive approximation, switched capacitor
Number of Inputs 1 input
সাপ্লাই ভোল্টেজ 5 V single supply
Maximum Power Dissipation 100 mW
Data Interface Serial, SPI
Internal Reference Voltage 2.5 V
প্যাকেজ 20-pin PDIP, 7.62 mm width
Terminal Count 20 terminals
মাউন্টিং টাইপ Through-hole
Packaging Tube
অপারেটিং তাপমাত্রা -40°C to +85°C
Temperature Grade Industrial
Power-Down Mode Supported
Factory Calibration Factory-calibrated switched-capacitor architecture
DC and AC Test Coverage Offset, gain, linearity, SNR, and THD

AD977ABNZ 20-pin pdip, 7.62 mm width পিন কনফিগারেশন গাইড

AD977ABNZ (20-pin pdip, 7.62 mm width প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

AD977ABNZ-এর জন্য 20-pin pdip, 7.62 mm width প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি AD977ABNZ.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

AD977ABNZ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Process Measurement, Precision Sensor Acquisition, Laboratory Instrumentation, Medical Monitoring Equipment, Industrial Control Systems, Legacy Equipment Repair.

🏭

Industrial Process Measurement

The AD977ABNZ fits process-measurement channels that require 16-bit resolution but do not need high-bandwidth waveform capture. Its 200 kSPS throughput permits rapid acquisition of temperature, pressure, level, or flow signals, while the single 5 V supply simplifies front-panel instrumentation. The serial interface reduces trace count on controller boards. Before deployment, verify signal bandwidth, sensor settling time, input range, isolation requirements, and the acquisition timing needed by the control loop.

🧩

Precision Sensor Acquisition

The AD977ABNZ is suitable for conditioning outputs from slow or multiplexed sensors that benefit from 16-bit numerical detail. A 200 kSPS SAR conversion rate can sample many diagnostic channels quickly, and the internal 2.5 V reference reduces external reference complexity. The converter consumes no more than 100 mW under specified conditions. For thermocouples, strain gauges, or resistive bridges, include suitable excitation, protection, filtering, and analog-front-end circuitry around the ADC.

🔧

Laboratory Instrumentation

The AD977ABNZ can serve as the acquisition converter in laboratory instruments that measure steady voltages, slow waveforms, or controlled sensor outputs. Its 16-bit resolution improves numerical visibility, while the serial SPI-compatible interface supports compact connection to a digital controller. The 20-pin PDIP format is particularly convenient for through-hole prototypes and repair assemblies. Validate input bandwidth, noise performance, SNR, THD, and acquisition timing against the instrument specifications before production release.

💊

Medical Monitoring Equipment

AD977ABNZ can be used in non-diagnostic monitoring equipment that acquires low-bandwidth physiological or laboratory sensor signals. Its 16-bit conversion resolution supports detailed measurements, and the 200 kSPS rate is more than adequate for many pressure, flow, or temperature channels. The single 5 V operation and 100 mW maximum power specification simplify portable-system power planning. Medical designs still require separate validation of patient safety, isolation, accuracy, EMC, and applicable quality requirements.

🏭

Industrial Control Systems

The AD977ABNZ fits embedded control loops that read analog process variables into a digital controller. A throughput rate of 200 kSPS gives substantial margin for typical temperature, pressure, and position feedback channels, while the serial interface limits controller pin usage. Power consumption of no more than 100 mW supports compact control assemblies. Ensure the selected grade, isolation architecture, input filtering, and watchdog behavior satisfy the equipment's environmental and functional-safety requirements.

🔧

Legacy Equipment Repair

AD977ABNZ is particularly relevant to repair and modernization of equipment that already uses a 20-pin PDIP AD977A-family converter. The through-hole package and documented AD977AANZ package compatibility support board-level substitution without changing the PCB footprint. Engineers should still compare every pin function, supply requirement, timing limit, temperature grade, and calibration characteristic. A successful physical insertion does not by itself establish that a substitute satisfies the original system's accuracy or reliability requirements.

What is the AD977ABNZ?
The AD977ABNZ is a 16-bit, single-input, successive-approximation ADC capable of 200 kSPS conversion throughput. According to the Analog Devices AD977 product page, it operates from a single 5 V supply and uses a factory-calibrated switched-capacitor architecture. The AD977ABNZ is packaged in a 20-pin PDIP and provides a serial SPI-compatible data interface.
What are the key specifications of AD977ABNZ?
The AD977ABNZ combines 16-bit resolution, 200 kSPS throughput, one analog input, a single 5 V supply, and a maximum power dissipation of 100 mW. The Analog Devices AD977 family description identifies a switched-capacitor SAR architecture and an internal 2.5 V reference. Its 20-pin PDIP package is a through-hole format intended for leaded PCB layouts, prototypes, and legacy equipment.
How fast is the AD977ABNZ ADC?
The AD977ABNZ has a maximum throughput rate of 200 kSPS. This figure applies to the AD977A version identified by the AD977ABNZ ordering code; the related AD977 family member operates at 100 kSPS. The Analog Devices AD977 product page distinguishes the two rates while describing the same single-supply, low-power SAR converter family.
Where can I download the AD977ABNZ datasheet PDF?
The AD977ABNZ datasheet PDF is available through the datasheet link on this page and through the Analog Devices AD977 family product page. Use the manufacturer document to verify the complete 20-pin connection, electrical limits, timing, reference specifications, and recommended application circuit before laying out or modifying a PCB.
Where can I find the AD977ABNZ pinout?
Use the connection diagram and pin-description table in the Analog Devices AD977 family datasheet to locate the AD977ABNZ pinout. The component uses a 20-pin PDIP package, with pin 1 identified conventionally at the top-left when the notch faces upward. Confirm analog, digital, power, ground, and no-connect assignments against the current manufacturer datasheet before wiring the device.
Does AD977ABNZ operate from a single 5 V supply?
Yes, the AD977ABNZ operates from a single 5 V supply. According to the Analog Devices AD977 family description, this single-supply arrangement reduces the number of external rails required by the converter. Place suitable bypass capacitors close to the supply pins and follow the manufacturer application guidance to limit supply noise at the sampling circuitry.
What interface does AD977ABNZ use?
The AD977ABNZ uses a serial, SPI-compatible interface for transferring 16-bit conversion results. This interface limits the number of signal traces required on a PCB compared with a parallel data bus. According to the DigChip part specification, the data interface is serial SPI, and the Analog Devices family description confirms the converter uses a serial interface.
Is AD977ABNZ suitable for sensor measurement systems?
Yes, AD977ABNZ is suitable for many sensor measurement systems that sample relatively slow or multiplexed analog signals. Its 16-bit resolution provides detailed numerical representation, while the 200 kSPS throughput supports many process-control and instrumentation channels. Source impedance, sensor settling time, input filtering, and the required acquisition interval must be checked before operation.
What is the difference between AD977ABNZ and AD977AANZ?
The AD977ABNZ and AD977AANZ are both 16-bit AD977A-family converters in the same 20-pin PDIP format, and FindIC identifies them as completely replaceable with consistent terminals and package characteristics. The practical distinction is the ordering code and associated grade or qualification details. Confirm the suffix-specific temperature, qualification, and ordering information in the Analog Devices documentation.
AD977ABNZ vs AD977ACN - which one should I select?
The AD977ABNZ and AD977ACN belong to the same 16-bit, 200 kSPS, single-supply SAR ADC family and are available in comparable leaded packages. Choose by suffix-specific temperature grade, qualification, availability, and exact datasheet limits rather than by conversion architecture. The manufacturer ordering table and lifecycle notices should control the final selection for production.
When should I choose AD977ABNZ instead of AD977ACN?
Choose AD977ABNZ when its suffix-specific temperature grade, qualification status, and lifecycle condition match the intended equipment more closely than those of AD977ACN. Both devices provide the core 16-bit, 200 kSPS SAR conversion function from a single 5 V supply. A replacement should be approved only after checking every pin, timing parameter, rating, and production requirement.
What can replace AD977ABNZ?
AD977AANZ is the closest documented replacement candidate for AD977ABNZ because FindIC reports consistent terminals and package characteristics with complete replacement without PCB modification. AD977ACN is another same-family consideration whose exact suffix conditions must be checked. Both candidates require engineering approval against the Analog Devices datasheet before being treated as unqualified production substitutes.
Is there a drop-in replacement for AD977ABNZ?
AD977AANZ is the strongest documented drop-in candidate for AD977ABNZ because it uses the same 20-pin PDIP package and the comparison reports consistent terminals and package characteristics. Fewer than five verified drop-in alternatives were identified. The Request a Quote form on this page can be used to request availability and lifecycle confirmation for the documented candidates.
Where can I buy AD977ABNZ and what is its lead time?
Use the Request a Quote form on this page to request AD977ABNZ availability, current pricing, minimum order quantity, and production lead time. Because this converter family is mature, availability may depend on remaining factory inventory or authorized sourcing channels. Provide the required quantity, date code, target grade, and acceptable package condition with the request.
How much power does AD977ABNZ dissipate?
The AD977ABNZ dissipates no more than 100 mW under its specified operating conditions. According to the AD977 family specifications, the converter is designed for low-power operation from one 5 V rail and also includes power-down capability. Actual board-level heating depends on conversion activity, supply voltage, ambient temperature, and the surrounding PCB thermal path.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা AD977ABNZ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose AD977ABNZ when maintaining a 20-pin PDIP system that requires a 16-bit SAR ADC with 200 kSPS throughput, a single 5 V supply, and a serial SPI-compatible interface. AD977AANZ is the preferred replacement candidate because its package and terminals are reported as completely replaceable; verify suffix-specific temperature and qualification requirements before release. AD977ACN is another same-family option for review, but its ordering-code characteristics must be checked against the original design. Neither replacement should be approved solely from package appearance. Confirm the pinout, analog input range, acquisition timing, reference behavior, power limits, SNR, THD, and operating-temperature requirements. For new designs that do not require a legacy PDIP footprint, compare modern ADC options based on bandwidth, accuracy, interface, lifecycle, and system requirements rather than limiting the search to this mature family.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য AD977AANZ AD977ACN
Package 20-pin PDIP 20-pin PDIP 20-pin PDIP
Brand Analog Devices Analog Devices Analog Devices
Resolution 16 bit 16 bit 16 bit
Throughput Rate 200 kSPS 200 kSPS 200 kSPS
Converter Architecture Successive approximation, switched capacitor Successive approximation, switched capacitor Successive approximation, switched capacitor
Number of Inputs 1 input 1 input 1 input
Supply Voltage 5 V single supply 5 V single supply 5 V single supply
Data Interface Serial, SPI Serial, SPI Serial, SPI
Power Dissipation 100 mW maximum 100 mW maximum 100 mW maximum

মূল পার্থক্যসমূহ

  • Documented direct package substitution (বনামAD977AANZ)
  • Low-power 16-bit conversion (বনামAD977ACN)
  • Single-supply system simplification (বনামAD977AANZ)

ডিজাইন নোট

Route the analog input directly to the converter and keep it away from serial clock and data traces. Place the input filter or protection network close to the ADC, and connect its return path to the converter ground without crossing noisy digital return paths. For a switched-capacitor SAR ADC, source impedance and capacitor settling time must remain compatible with the acquisition interval.

Use the Analog Devices application guidance to select and place the supply bypass capacitors. Keep the input and digital return paths compact, and use the package ground leads effectively rather than relying on a long board trace. The converter operates from one 5 V rail, but measured noise and conversion accuracy also depend on rail quality, clock stability, and reference decoupling.

Treat the serial clock as a critical signal even though the conversion rate is only 200 kSPS. Use short traces, a continuous ground reference, and logic levels compatible with the connected controller. Check setup and hold requirements from the manufacturer datasheet, especially when the ADC and controller are separated by a cable or connector.

Do not assume that any AD977A-family suffix is a drop-in substitute. Confirm the exact 20-pin assignments, supply limits, temperature grade, timing, reference configuration, and calibration behavior. AD977AANZ has documented package compatibility with AD977ABNZ, while AD977ACN still requires suffix-specific review before production use.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

No definitive RoHS, REACH, halogen-free, lead-free, or conflict-minerals declaration was identified for the exact AD977ABNZ ordering code. The part is an industrial-temperature data-conversion IC and is not presented as an automotive-qualified device.

ডেটা যাচাই করা হয়েছে: 2026-11-19 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

AD977ABNZ datasheet AD977ABNZ datasheet pdf AD977ABNZ pinout AD977ABNZ equivalent AD977ABNZ replacement AD977ABNZ cross reference AD977ABNZ price AD977ABNZ stock Analog Devices AD977ABNZ AD977ABNZ 20-DIP ADC AD977ABNZ 16 bit 200 kSPS AD977ABNZ sensor acquisition AD977ABNZ vs AD977AANZ AD977ABNZ vs AD977ACN AD977ABNZ footprint

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices AD977ABNZ AD977AANZ AD977ACN AD977 AD977A analog-to-digital converter ADC successive-approximation ADC SAR ADC switched-capacitor ADC data acquisition analog signal conditioning 16-bit resolution 200 kSPS throughput single 5 V supply SPI serial interface internal 2.5 V reference 20-pin PDIP through-hole package factory calibration signal-to-noise ratio SNR total harmonic distortion THD
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন