AD977ABNZ - 16-Bit 200 kSPS SAR ADC | Analog Devices
MPN: AD977ABNZ ✗ Cuối đờiAD977ABNZ Tóm tắt
An ADC is an interface component that converts an analog voltage into a numeric value for processing, measurement, or control. The AD977 belongs to the successive-approximation ADC family within the broader data-acquisition and signal-conversion hierarchy. Compared with flash and pipeline converters, a SAR ADC generally offers good accuracy and power efficiency in a compact package, although its sampling rate is lower than many high-speed architectures.
The AD977ABNZ provides 16-bit resolution, one analog input, and a serial SPI-compatible interface. Its maximum throughput is 200 kSPS, while its specified power dissipation is no more than 100 mW. Operation from a single 5 V supply simplifies analog and digital rail design. The device also supports power-down mode and is factory tested for SNR and THD in addition to conventional offset, gain, and linearity specifications.
Its switched-capacitor sampling system supports deterministic conversion sequencing, while the internal reference reduces the need for an external precision reference in many measurement systems. The serial interface reduces the number of PCB traces and can be useful in compact instrumentation. As with any sampling ADC, input bandwidth, source impedance, acquisition time, clock quality, reference stability, and PCB grounding directly affect achievable accuracy.
Typical uses include industrial process measurement, sensor signal acquisition, laboratory instruments, medical monitoring, industrial control, and embedded data acquisition. The 200 kSPS rate is appropriate for many slowly changing or multiplexed analog signals rather than high-bandwidth waveform capture. The 20-pin through-hole PDIP package is also convenient for prototypes, legacy equipment, and repair assemblies that use leaded components.
When laying out the circuit, keep the analog input path short, place decoupling capacitors near the supply pins, and provide a clean return path from the converter ground to the source. Check the input range and acquisition timing before selecting source resistance. For systems replacing a modern surface-mount ADC, verify the complete pinout, interface timing, reference behavior, and calibration requirements rather than relying on package dimensions alone.
This product page combines the AD977 family architecture, exact AD977ABNZ package and performance details, replacement considerations, and practical implementation guidance to support component selection, PCB design, and lifecycle planning.
Bộ thay thế dễ dàng lắp đặt cho AD977ABNZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với AD977ABNZ (cùng hình factor và footprint) — khác nhau ở Data Interface, Factory Calibration, Package, Supply Voltage.
AD977AANZ
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →AD977ACN
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
AD977ABNZ Tỷ lệ tối đa & tính chất điện
| Number of Bits | 16 bit |
| Tỷ lệ lấy mẫu | 200 kSPS |
| Converter Architecture | Successive approximation, switched capacitor |
| Number of Inputs | 1 input |
| Điện áp cung cấp | 5 V single supply |
| Maximum Power Dissipation | 100 mW |
| Data Interface | Serial, SPI |
| Internal Reference Voltage | 2.5 V |
| Hộp | 20-pin PDIP, 7.62 mm width |
| Terminal Count | 20 terminals |
| Kiểu lắp đặt | Through-hole |
| Packaging | Tube |
| Nhiệt độ hoạt động | -40°C to +85°C |
| Temperature Grade | Industrial |
| Power-Down Mode | Supported |
| Factory Calibration | Factory-calibrated switched-capacitor architecture |
| DC and AC Test Coverage | Offset, gain, linearity, SNR, and THD |
Hướng dẫn cấu hình chân AD977ABNZ 20-pin pdip, 7.62 mm width
Cấu hình chân cho AD977ABNZ (20-pin pdip, 7.62 mm width gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho AD977ABNZ.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
AD977ABNZ phù hợp cho 6 Áp dụngs: Industrial Process Measurement, Precision Sensor Acquisition, Laboratory Instrumentation, Medical Monitoring Equipment, Industrial Control Systems, Legacy Equipment Repair.
Industrial Process Measurement
The AD977ABNZ fits process-measurement channels that require 16-bit resolution but do not need high-bandwidth waveform capture. Its 200 kSPS throughput permits rapid acquisition of temperature, pressure, level, or flow signals, while the single 5 V supply simplifies front-panel instrumentation. The serial interface reduces trace count on controller boards. Before deployment, verify signal bandwidth, sensor settling time, input range, isolation requirements, and the acquisition timing needed by the control loop.
Được đề xuất
Precision Sensor Acquisition
The AD977ABNZ is suitable for conditioning outputs from slow or multiplexed sensors that benefit from 16-bit numerical detail. A 200 kSPS SAR conversion rate can sample many diagnostic channels quickly, and the internal 2.5 V reference reduces external reference complexity. The converter consumes no more than 100 mW under specified conditions. For thermocouples, strain gauges, or resistive bridges, include suitable excitation, protection, filtering, and analog-front-end circuitry around the ADC.
Được đề xuất
Laboratory Instrumentation
The AD977ABNZ can serve as the acquisition converter in laboratory instruments that measure steady voltages, slow waveforms, or controlled sensor outputs. Its 16-bit resolution improves numerical visibility, while the serial SPI-compatible interface supports compact connection to a digital controller. The 20-pin PDIP format is particularly convenient for through-hole prototypes and repair assemblies. Validate input bandwidth, noise performance, SNR, THD, and acquisition timing against the instrument specifications before production release.
Được đề xuất
Medical Monitoring Equipment
AD977ABNZ can be used in non-diagnostic monitoring equipment that acquires low-bandwidth physiological or laboratory sensor signals. Its 16-bit conversion resolution supports detailed measurements, and the 200 kSPS rate is more than adequate for many pressure, flow, or temperature channels. The single 5 V operation and 100 mW maximum power specification simplify portable-system power planning. Medical designs still require separate validation of patient safety, isolation, accuracy, EMC, and applicable quality requirements.
Được đề xuất
Industrial Control Systems
The AD977ABNZ fits embedded control loops that read analog process variables into a digital controller. A throughput rate of 200 kSPS gives substantial margin for typical temperature, pressure, and position feedback channels, while the serial interface limits controller pin usage. Power consumption of no more than 100 mW supports compact control assemblies. Ensure the selected grade, isolation architecture, input filtering, and watchdog behavior satisfy the equipment's environmental and functional-safety requirements.
Được đề xuất
Legacy Equipment Repair
AD977ABNZ is particularly relevant to repair and modernization of equipment that already uses a 20-pin PDIP AD977A-family converter. The through-hole package and documented AD977AANZ package compatibility support board-level substitution without changing the PCB footprint. Engineers should still compare every pin function, supply requirement, timing limit, temperature grade, and calibration characteristic. A successful physical insertion does not by itself establish that a substitute satisfies the original system's accuracy or reliability requirements.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho AD977ABNZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | AD977AANZ | AD977ACN |
|---|---|---|---|
| Package | 20-pin PDIP | 20-pin PDIP | 20-pin PDIP |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Resolution | 16 bit | 16 bit | 16 bit |
| Throughput Rate | 200 kSPS | 200 kSPS | 200 kSPS |
| Converter Architecture | Successive approximation, switched capacitor | Successive approximation, switched capacitor | Successive approximation, switched capacitor |
| Number of Inputs | 1 input | 1 input | 1 input |
| Supply Voltage | 5 V single supply | 5 V single supply | 5 V single supply |
| Data Interface | Serial, SPI | Serial, SPI | Serial, SPI |
| Power Dissipation | 100 mW maximum | 100 mW maximum | 100 mW maximum |
Bảo phân biệt quan trọng
- Documented direct package substitution (vsAD977AANZ)
- Low-power 16-bit conversion (vsAD977ACN)
- Single-supply system simplification (vsAD977AANZ)
Ghi chú thiết kế
Route the analog input directly to the converter and keep it away from serial clock and data traces. Place the input filter or protection network close to the ADC, and connect its return path to the converter ground without crossing noisy digital return paths. For a switched-capacitor SAR ADC, source impedance and capacitor settling time must remain compatible with the acquisition interval.
Use the Analog Devices application guidance to select and place the supply bypass capacitors. Keep the input and digital return paths compact, and use the package ground leads effectively rather than relying on a long board trace. The converter operates from one 5 V rail, but measured noise and conversion accuracy also depend on rail quality, clock stability, and reference decoupling.
Treat the serial clock as a critical signal even though the conversion rate is only 200 kSPS. Use short traces, a continuous ground reference, and logic levels compatible with the connected controller. Check setup and hold requirements from the manufacturer datasheet, especially when the ADC and controller are separated by a cable or connector.
Do not assume that any AD977A-family suffix is a drop-in substitute. Confirm the exact 20-pin assignments, supply limits, temperature grade, timing, reference configuration, and calibration behavior. AD977AANZ has documented package compatibility with AD977ABNZ, while AD977ACN still requires suffix-specific review before production use.
Thông tin tuân thủ
No definitive RoHS, REACH, halogen-free, lead-free, or conflict-minerals declaration was identified for the exact AD977ABNZ ordering code. The part is an industrial-temperature data-conversion IC and is not presented as an automotive-qualified device.