ADS574JP - 12-Bit SAR ADC, 28-PDIP | Texas Instruments
MPN: ADS574JP ✓ چالاکADS574JP گشتی
A successive-approximation ADC is a type of analog-to-digital converter that converts a sampled analog voltage into a digital code through a sequence of internal comparisons. The ADS574 belongs to the ADC > data-converter IC > semiconductor hierarchy and is intended for microprocessor-controlled measurement systems requiring 12-bit resolution, parallel digital data, and a complete conversion function on one integrated circuit.
The ADS574JP integrates functions that otherwise require several discrete components. Its internal sample-and-hold circuit eliminates the need for an external sample-and-hold stage in most applications, while the on-chip reference and clock reduce external component count. The 28-pin PDIP package also supports straightforward through-hole assembly and direct connection to microprocessor data and control buses.
Its sampling architecture uses a charge-distributed capacitor array implemented in low-power CMOS technology. Acquisition and conversion are completed in as little as 25 µs, making the converter practical for industrial control, instrumentation, process monitoring, and embedded measurement systems. The manufacturer's datasheet describes guaranteed AC and DC performance, including the ability to replace older ADC574 implementations with lower power consumption and single-supply operation.
Typical uses include industrial panel instrumentation, temperature and pressure measurement, laboratory data acquisition, process-control loops, and legacy computer-interface boards. The 12-bit resolution provides 4096 digital codes for the converter's full-scale range, while the parallel microprocessor interface supports direct bus connection when system timing and output-control requirements are suitable.
The primary design consideration is legacy-system compatibility. Before replacing an ADC574, verify supply voltage, interface polarity, acquisition timing, reference behavior, and package pin assignments against the original board. The ADS574JP's internal sampling and clock make it electrically convenient, but a successful migration also requires checking whether the surrounding logic relies on functions removed or reorganized in the newer converter.
This page combines manufacturer-function details, package information, cross-reference findings, and practical migration guidance to support faster component selection. It also identifies where original ADC574 designs may require attention beyond simple pin substitution, helping engineers evaluate compatibility before committing to a PCB change.
جێگرەوەکانی جێگۆڕکێ بۆ ADS574JP — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADS574JP (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Supply Voltage, RoHS Status, Package, Mounting Type, Operating Temperature.
هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.
داوای جێگرەوەکان بکەADS574JP زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| ADC Resolution | 12 bit |
| Input Channel Count | 1 channel |
| Conversion Architecture | Successive approximation (SAR) |
| Maximum Acquisition and Conversion Time | 25 µs |
| ڤۆڵتیەی دابینکردن | +5 V |
| Technology | Low-power CMOS |
| پاکێج | 28-pin PDIP |
| جۆری دامەزراندن | Through-hole |
| Internal Sample-and-Hold | Yes |
| Internal Reference | Yes |
| Internal Clock | Yes |
| Microprocessor Interface | Parallel, microprocessor-compatible |
| Output Resolution Count | 4096 codes |
| ADC574 Replacement Capability | Drop-in replacement in most applications |
ڕێنمایی ڕێکخستنی پینی ADS574JP 28-pin pdip
ڕێکخستنی پین بۆ ADS574JP (پاکێجی 28-pin pdip). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADS574JP.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ADS574JP گونجاوە بۆ 6 بەکارھێنانs: Industrial Process Measurement, Temperature and Pressure Monitoring, Legacy Data-Acquisition Board Upgrade, Laboratory Instrumentation, Embedded Control System, Instrumentation and Control Retrofit.
Industrial Process Measurement
The ADS574JP fits industrial process-measurement systems that must convert a sensor voltage into a 12-bit digital code for a controller or computer. Its integrated sample-and-hold circuit, reference, and clock reduce the analog front-end count, while the maximum 25 µs acquisition and conversion time supports measurement loops that require deterministic updates. The 12-bit resolution yields 4096 code levels across the converter range. In a transmitter or data-acquisition module, the parallel interface can connect directly to suitable control logic after timing and polarity checks. Designers should budget input settling time for the selected sensor and signal-conditioning network.
پێشنیارکراو
Temperature and Pressure Monitoring
The ADS574JP is appropriate for temperature or pressure monitoring when the conditioned sensor output must be digitized inside a compact instrumentation circuit. Its 12-bit SAR conversion, integrated sampling function, and 25 µs maximum acquisition and conversion time provide a practical path for periodic readings. The internal reference and clock reduce the number of timing and calibration components around the converter. A practical implementation places the ADS574JP behind an input buffer or low-pass filter, then uses the parallel output to feed a microcontroller or counter. Input range and calibration requirements must be established from the ADS574 electrical characteristics.
پێشنیارکراو
Legacy Data-Acquisition Board Upgrade
The ADS574JP is well suited to maintaining or upgrading a legacy parallel-bus data-acquisition board because the manufacturer describes it as a drop-in replacement for ADC574 models in most applications. Its internal sampling circuit removes the usual external sample-and-hold requirement, and single +5 V operation simplifies power planning compared with legacy implementations. Before population, compare every ADC574 net against the ADS574 pin description and verify bus timing, control polarity, and acquisition requirements. The 28-pin PDIP footprint supports through-hole assembly and can help preserve existing board architecture when the mechanical and electrical checks pass.
پێشنیارکراو
Laboratory Instrumentation
The ADS574JP can serve as the measurement converter in laboratory instruments that acquire slowly changing or repetitive analog inputs and present the result to digital control circuitry. Its 12-bit resolution provides 4096 output codes, while the 25 µs maximum conversion time supports rapid repetitive acquisition compared with many general-purpose instrumentation converters. The integrated reference, clock, and sample-and-hold function simplify board partitioning. Use suitable input protection and buffering when test signals can exceed the converter's specified input range. For laboratory accuracy, characterize offset, gain, and noise in the completed analog path rather than relying only on nominal converter resolution.
پێشنیارکراو
Embedded Control System
The ADS574JP can be used as the ADC in an embedded control system when the controller needs periodic measurements and the interface timing is compatible with a parallel bus. The converter's single-channel SAR architecture, internal sampling, and maximum 25 µs conversion time make it suitable for supervisory measurements of pressure, level, position, or analog sensor outputs. The internal reference and clock help reduce external circuitry, but the host processor must still handle conversion status, data capture, and scaling. Choose acquisition timing and input impedance carefully so the source can settle within the converter's sampling interval.
پێشنیارکراو
Instrumentation and Control Retrofit
The ADS574JP fits retrofit projects for older instrumentation equipment that used ADC574-class converters and retain 28-pin PDIP layouts. Because the Texas Instruments ADS574 is described as a drop-in replacement for ADC574 models in most applications, it offers a path to modernize acquisition without immediately redesigning the board. The internal sample-and-hold function and single +5 V operation simplify the power and analog sections. Retrofit success depends on checking signal polarity, control timing, output states, reference behavior, and supply sequencing against the original circuit. A bench validation should compare old and new readings before deployment in production equipment.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ADS574JP — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە |
|---|---|
| ADC Resolution | 12 bit |
| Input Channel Count | 1 channel |
| Conversion Architecture | Successive approximation (SAR) |
| Maximum Acquisition and Conversion Time | 25 µs |
| Supply Voltage | Single +5 V |
| Package | 28-pin PDIP |
| Brand | Texas Instruments |
| Internal Sample-and-Hold | Yes |
| Internal Reference and Clock | Yes |
| Microprocessor Interface | Parallel, microprocessor-compatible |
جیاکەرەوە سەرەکییەکان
- Integrated sampling replaces the usual external sample-and-hold stage (بەراورد بەADC574)
- Single-supply operation supports modern power planning (بەراورد بەADC574)
- Complete converter function reduces external component count (بەراورد بەAD574AJNZ)
- Rapid conversion supports higher sampling rates (بەراورد بەADS574KPG4)
تێبینییەکانی دیزاین
Treat the ADS574 as a migration device rather than an unconditional pin substitution. Before replacing an ADC574, compare the ADS574JP pin description with every populated-board net, especially supply, analog input, clock, control, data-bus, and output-state connections. The manufacturer states that it replaces ADC574 models in most applications, but board-level differences in signal range, timing, or control polarity can still prevent operation.
Design the analog input path to settle within the converter's acquisition interval. Place the input protection, filtering, and termination components close to the ADS574JP and keep high-impedance routing away from digital output and clock traces. The integrated sample-and-hold circuit removes the need for an external sample-and-hold stage in most applications, but it does not remove the requirement for a source capable of charging the internal sampling network.
Preserve a conventional through-hole layout around the 28-pin PDIP when retrofitting an existing board. Route the parallel data bus away from sensitive analog-input nodes and provide a quiet ground return for the converter. Check supply decoupling against the manufacturer's application guidance and maintain adequate clearance between adjacent digital signals. Because the exact pin table must be taken from the datasheet, do not derive PCB connections from package position alone.
Use the single +5 V supply arrangement specified by the Texas Instruments ADS574 datasheet and verify power sequencing at system level. The integrated reference and clock reduce the need for external components, but supply noise can still affect conversion performance. Keep regulator output and switching-node coupling away from the analog input and reference-related nodes, and include normal bypass capacitance close to the device pins.
زانیاری پابەندبوون
The available product and comparison excerpts do not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-mineral status. AEC-Q100 is not applicable to this unspecified industrial/commercial legacy device, but the exact ordered grade should be confirmed from the manufacturer product record.